SyncMaster 400UXN-3, 400UX-3, 460UXN-3, 460UX-3
LCD Display
User Manual
The color and the appearance may differ depending on the
product, and the specifications are subject to change
without prior notice to improve the performance.
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
Ensure that the power plug is plugged into the power outlet
firmly and correctly.
•
Otherwise, this may result in fire.
Do not forcefully bend or pull the power plug and do not place
any heavy material on it.
•
Otherwise, this may result in fire.
Do not connect multiple appliances to the same power outlet.
Otherwise, this may cause fire due to overheating.
•
Do not disconnect the power cord while using the product.
•
Otherwise, this may result in damage to the product due to
electric shock.
To disconnect the apparatus from the mains, the plug must be
pulled out from the mains socket, therefore the mains plug shall
be readily operable.
•
Otherwise, this may cause electric shock or fire.
Use only the power cord provided by our company. Do not use
the provided power cord of another product.
•
Otherwise, this may result in fire or electric shock.
Connect the power plug to a wall outlet that can be easily
reached.
•
When a problem occurs with the product, you must unplug the
power plug to cut the power off completely. You cannot cut the
power off completely using only the power button on the prod-
uct.
Installation
Be sure to contact an authorized Service Center when installing your
monitor in a location with heavy dust, high or low temperatures, high hu-
midity, and exposed to chemical substances and where it operates for 24
hours such as at airports, train stations etc.
Failure to do so may cause serious damage to your monitor.
Ensure that at least two persons lift and move the product.
•
Otherwise, it may be dropped and cause personal injury, and/
or damage the product.
When installing the product in a cabinet or rack, make sure that
the front end of the bottom of the product does not project out.
•
•
Otherwise, it may fall or cause personal injury.
Use a cabinet or rack of a size appropriate to the product.
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
DO NOT PLACE CANDLES, MOSQUITO REPELLANT, CIG-
ARETTES AND ANY HEATING APPLIANCES NEAR THE
PRODUCT.
•
Otherwise, this may result in fire.
Keep heating appliances as far away from the power cord or the
product as possible.
•
Otherwise, this may result in electric shock or fire.
Do not install it in a badly ventilated location such as a bookcase
or closet.
•
Otherwise, this may result in fire due to an increase in the in-
ternal temperature.
When putting the product down, make sure to put it down softly.
•
Otherwise, this may result in damage to the screen display.
Do not place the front of the product on the floor.
•
Otherwise, this may result in damage to the screen display.
Ensure that an authorized installation company installs the wall
mount.
•
•
Otherwise, it may fall and cause personal injury.
Make sure to install the specified wall mount.
Install your product in a well ventilated location. Ensure that
there is a clearance of more than 4 inches (10 cm) from the wall.
•
Otherwise, it may result in fire due to an increase in the internal
temperature.
Ensure that the packaging vinyl is kept away from children.
•
Otherwise, it may result in serious harm (suffocation) if children
play with it.
If the height of your monitor is adjustable, do not place any ob-
ject or part of your body on the stand when lowering it.
•
This may cause damage to the product or the person carrying
it.
Edible oil, such as soybean oil, can damage or deform the prod-
uct. Do not install the product in a kitchen or near a kitchen counter.
Clean
When cleaning the monitor case or the surface of the TFT-LCD screen,
wipe with a slightly moistened, soft cloth.
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
Do not spray cleaner directly onto the surface of the product.
•
Otherwise, this may result in the discoloration and distortion of
the structure and the screen surface may peel off.
When cleaning the power plug pins or dusting the power outlet,
clean it with a dry cloth.
•
Otherwise, it may result in fire.
When cleaning the product, make sure to disconnect the power
cord.
•
Otherwise, it may result in electric shock or fire.
When cleaning the product, disconnect the power cord and
clean it with a soft, dry cloth.
•
(Do not use chemicals such as wax, benzene, alcohol, thinner,
mosquito repellant, lubricant, or cleaner.) These may change
the appearance of the product surface and peel off the indica-
tion labels on the product.
Since the product housing is easily scratched, make sure to use
the specified cloth only.
When cleaning the product, do not spray water directly onto the
main body of the product.
•
Ensure that water does not enter the product and that it is not
wet.
•
Otherwise, this may result in electric shock, fire or a malfunc-
tion.
Others
The product is a high voltage product. Do not disassemble, re-
pair or modify the product yourself.
•
Otherwise, this may result in electric shock or fire. If the product
needs to be repaired, contact a Service Center.
If there is a strange smell or a strange sound or smoke is coming
from the product, disconnect the power plug immediately and con-
tact a Service Center.
•
Otherwise, this may result in electric shock or fire.
Do not place this product in a location exposed to moisture, dust,
smoke, water, or in a car.
•
Otherwise, this may result in electric shock or fire.
When you drop the product or the case is broken, turn the power
off and disconnect the power cord. Contact a Service Center.
•
Otherwise, this may result in electric shock or fire.
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
If thunder or lightning is occurring, do not touch the power cord
or antenna cable.
•
Otherwise, this may result in electric shock or fire.
Do not try to move the monitor by pulling only the wire or the
signal cable.
•
Otherwise, it may fall and result in electric shock, damage to
the product or fire due to damage to the cable.
Do not lift or move the product back and forwards or right and
left while only holding the power cord or signal cables.
•
Otherwise, it may fall and result in electric shock, damage to
the product or fire due to damage to the cable.
Make sure that the ventilating opening is not blocked by a table
or curtain.
•
Otherwise, it may result in fire due to an increase in the internal
temperature.
Do not place any containers containing water, vases, flower-
pots, medicines as well as any metal on the product.
•
If water or a foreign material enters the product, disconnect the
•
This may result in a product malfunction, electric shock, or fire.
Do not use or keep combustible spray or flammable material
near the product.
•
Otherwise, this may result in an explosion or fire.
Do not insert any metal, such as chopsticks, coins, pins and
steel, or flammable objects, such as matches or paper, inside the
product (through the ventilating openings, input and output termi-
nals, etc).
•
If water or foreign material enters the product, disconnect the
•
Otherwise, this may result in electric shock or fire.
When using a fixed screen for a long time, an afterimage or stain
may occur.
•
If you are not using your product for a long period of time, put
it into sleep mode or use a moving screen saver.
•
Otherwise, your eyesight may be damaged.
When using headphones or earphones, do not turn the volume
too high.
•
Having the sound too loud may damage your hearing.
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
To avoid eyestrain, do not sit too close to the product.
Take a rest for at least five (5) minutes after using the monitor
for one (1) hour.
•
This reduces eye fatigue.
Do not install it in an unstable location such as an unstable rack
or uneven surface or a location exposed to vibrations.
•
Otherwise, it may fall and cause personal injury and/or damage
the product.
•
If you use the product in a location exposed to vibrations, it may
damage the product and result in fire.
When moving the product, turn the power off and disconnect
the power plug, antenna cable, and all the cables connected to the
product.
•
Otherwise, it may result in electric shock or fire.
Ensure that children do not hang onto the product or climb up
onto the product.
•
The product may fall and cause personal injury or death.
If you do not use the product for a long period of time, disconnect
the power cord from the power outlet.
•
Otherwise, this may result in overheating or fire due to dust,
and may result in fire due to electric shock or leakage.
Do not place any heavy items or toys or confectionery, such as
cookies etc. that may attract the attention of children and to the
product.
•
Your children may hang onto the product causing it to fall and
this may result in personal injury or death.
Be careful that children do not place the battery in their mouths
when removed from the remote control. Place the battery in a lo-
cation that children or infants cannot reach.
•
If children have had the battery in their mouths, consult your
doctor immediately.
When replacing the battery, insert it with the right polarity (+, -).
•
Otherwise, the battery may become damaged or it may cause
fire, personal injury or damage due to leakage of the internal
liquid.
Use only the specified standardized batteries, and do not use a
new battery and a used battery at the same time.
•
Otherwise, the batteries may be damaged or cause fire, per-
sonal injury or damage due to a leakage of the internal liquid.
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
The batteries (and rechargeable batteries) are not ordinary re-
fuse and must be returned for recycling purposes. The customer
is responsible for returning the used or rechargeable batteries for
recycling.
•
The customer can return used or rechargeable batteries to a
nearby public recycling center or to a store selling the same
type of the battery or rechargeable battery.
Do not place the product in a location exposed to direct sunlight
or near any heat such as a fire or heater.
•
This may reduce the lifetime of the product, and may result in
fire.
Do not drop any objects onto the product or cause any impact
to the product.
•
Otherwise, this may result in electric shock or fire.
Do not use a humidifier near the product.
•
Otherwise, this may result in electric shock or fire.
When there is a gas leak, do not touch the product or the power
plug; ventilate immediately.
•
If a spark occurs, it may cause an explosion or fire.
If the product has been turned on for a long time, the display
panel becomes hot. Do not touch it.
Keep the small accessories in a location out of the reach of
children.
Be careful when adjusting the angle of the product or the height
of the stand.
•
This may result in personal injury as your hand or fingers may
become caught.
•
Also, if you tilt the product too far, it may fall and cause personal
injury.
Do not install the product in a location low enough for children
to reach.
•
•
Otherwise, it may fall and result in personal injury.
Since the front part of the product is heavy, install the product
on a level and stable surface.
Do not put any heavy objects on the product.
•
This may result in personal injury and/or damage to the prod-
uct.
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Package Contents
Checking the Contents of the Package
Remove the lock from the package box, as shown in the figure above.
Lift up the package box by Check the contents of the Remove the Styrofoam
holding the grooves on
both sides of the package
box.
package.
and vinyl cover.
Note
•
•
•
•
After unpacking the package, make sure to check the contents of the package.
Store the packaging box in case you need to move the Product later.
If any items are missing, contact your dealer.
Contact a local dealer to purchase optional items.
Unpacking
LCD Display
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Manuals
Quick Setup Guide
Warranty Card
User Manual
(Not available in all loca-
tions)
MagicInfo Software DVD
(Applicable to the
400UXN-3, 460UXN-3
model only)
Cables
Power Cord
D-Sub Cable
Others
Remote Control
(BP59-00138B)
Batteries (AAA X 2)
(Not available in all loca-
tions)
Sold separately
Semi Stand KIT
LAN Cable
USB Cable
(Applicable to the
400UXN-3, 460UXN-3
model only)
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Sold separately
RGB to BNC Cable
RGB to Component Cable
Network Box
(Applicable to the
400UX-3, 460UX-3 model
only)
Wall Mount KIT
TV Tuner Box
(US Only)
Note
Accessories that can be purchased with the product vary by country.
Your LCD Display
Front
SOURCE button
Switches from PC mode to Video mode. Selects the input source that an
external device is connected to.
[PC] → [DVI] → [AV] → [Component] → [HDMI1] → [HDMI2] → [Dis-
playPort] → [MagicInfo] → [TV]
Note
•
•
A TV tuner box (sold separately) must be connected to use the TV. (US Only)
A network box (sold separately) must be connected to use MagicInfo
with a 400UX-3, 460UX-3 model.
POWER button
Use this button for turning the LCD Display on and off.
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Power indicator
Shows PowerSaver mode by blinking green
Note
power saving functions. For energy conservation, turn your LCD Display
OFF when it is not needed or when leaving it unattended for long periods.
Remote Control Sensor
Aim the remote control towards this spot on the LCD Display.
Rear
Note
figuration at the back may vary slightly depending on the model.
POWER S/W ON [ │ ] / OFF
Switches the LCD Display On/Off.
POWER
The power cord plugs into the LCD Display
and the wall outlet.
IR OUT/IN
Receives a signal from the remote control
and outputs the signal through Loopout when
a removable sensor board is connected.
AMBIENT SENSOR IN
Supplies power to the removable sensor
board and receives a signal from the light
sensor.
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
DVI OUT (LOOPOUT)
•
•
Connect a monitor to another monitor
through a DVI, DVI to HDMI cable.
Connect a DVI or DVI-HDMI cable to [DVI
OUT (LOOPOUT)] on the product and
[DVI IN] or [HDMI IN] on another monitor.
•
HDMI and network signals sent via the
[DVI OUT(LOOPOUT)] port are dis-
played on the second display which has
the [DVI IN] port.
Note
•
•
The Loopout function can be used to du-
plicate the screen of the primary display.
Connect [DVI OUT] on the primary dis-
play to [DVI IN] or [HDMI] on another
display.
A maximum of 100 monitors can be con-
nected to DVI-Loopout (using a 2m-long
DVI cable). Up to HD resolution can be
supported. Compatible input sources in-
clude DVI IN, HDMI IN 1, and HDMI IN 2
(MagicInfo).
•
The status of the cable may have a great
effect on the Loopout performance.
RGB/COMPONENT IN (PC/COMPO-
NENT Connection Terminal (Input))
•
Connect the [RGB/COMPONENT IN]
port on the monitor to the RGB port on the
PC using the D-SUB cable.
•
Connect the [RGB/COMPONENT IN]
port on the monitor to the COMPONENT
port on the external device using the RGB
to COMPONENT cable.
•
Connect the [RGB/COMPONENT IN]
port on the monitor to the BNC port on the
PC using the RGB to BNC cable.
DVI IN (PC Video Connection Terminal)
Connect the [DVI IN] port on the monitor to
the DVI port on the PC using the DVI cable.
RGB/DVI/DP/HDMI AUDIO IN (PC/DVI/
DP/HDMI Audio Connection Terminal (In-
put))
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Connect the [RGB/DVI/DP/HDMI AUDIO
IN] terminal of the monitor and the speaker
output terminal of your computer's sound
card using a stereo cable (sold separately).
DP IN
Receives a signal from the Display port.
Connect a DP cable to [DP IN] on the product
and DP IN on another display.
AV/COMPONENT AUDIO IN [R-AUDIO-
L]
Connect the [AV/COMPONENT [R-AUDIO-
L]] port on the monitor to the audio output
port on the PC or on the external device us-
ing an audio cable.
AV IN
Connect the [AV IN] terminal of your monitor
to the video output terminal of the external
device using a VIDEO cable.
AUDIO OUT
Connect a headphone or an External speak-
er.
DC OUT
Make sure to use connecting [DC OUT] ter-
minal to the authorized TV-Tuner Box.
(US Only)
Otherwise, this may result in damage
to the product.
HDMI IN 1
•
Connect the [HDMI IN 1] terminal at the
back of your LCD Display to the HDMI
terminal of your digital output device us-
ing a HDMI cable.
•
•
Up to HDMI 1.3 can be supported.
Note
The [HDMI IN 1] port can be connected
to general external devices (DVD play-
ers, camcorders, etc.) or the TV set-top
box.
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
•
To use a TV tuner box (US Only), make
sure to connect it to the [HDMI IN 1]
terminal.
HDMI IN 2 (MAGICINFO)
•
•
Connect the [HDMI IN 2 (MAGICINFO)]
terminal at the back of your LCD Display
to the HDMI terminal of your digital output
device using a HDMI cable.
Up to HDMI 1.3 can be supported.
Note
The MAGICINFO OUT port must be connec-
ted to the [HDMI IN 2 (MAGICINFO)] port.
RJ 45 MDC (MDC PORT)
MDC(Multiple Display Control) Program Port
Connect the LAN cable to [RJ45 MDC] on the
product and LAN on the PC. To use an MDC,
the MDC program must be installed on the
PC.
Note
Go to Multi Control and select RJ45 MDC
as the MDC Connection.
RS232C OUT/IN (RS232C Serial PORT)
MDC(Multiple Display Control) Program Port
Connect a serial cable (cross type) to
[RS232C] on the product and RS232C on the
PC. To use an MDC, the MDC program must
be installed on the PC.
Note
Go to Multi Control and select RS232C
MDC as the MDC Connection.
RGB OUT
MagicInfo video output port
Note
Applicable to the 400UXN-3, 460UXN-3
model only.
MAGICINFO OUT
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Outputs MagicInfo DP signals. It should be
connected to [HDMI IN 2 (MAGICINFO)] via
a DP to HDMI cable.
LAN (LAN Connection Terminal)
Connects to a LAN cable to allow Internet or
network access in MagicInfo mode.
Note
Applicable to the 400UXN-3, 460UXN-3
model only.
USB (USB Connection Terminal)
Keyboard / Mouse, Mass Storage Device
Compatible.
Note
Applicable to the 400UXN-3, 460UXN-3
model only.
Kensington Lock slot
A Kensington Lock is an anti-theft device that
enables users to lock the product so that they
can safely use it in public locations. Since the
shape and usage of the locking device may
differ depending on the model and the man-
ufacturer, for more information, refer to the
User Manual supplied with the locking device
for more information.
To lock the product, follow these
steps:
1. Wrap the Kensington lock cable around
a large, stationary object such as a desk
or chair.
2. Slide the end of the cable with the lock
attached through the looped end of the
Kensington lock cable.
3. Insert the Kensington Lock into the se-
curity slot ( ) on the back of the dis-
play.
4.
Lock the lock ( ).
Note
•
You must purchase the Kensington Lock
separately.
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
•
These are general instructions. For exact
instructions, see the User Manual sup-
plied with the locking device.
•
You can purchase the locking device
from an electronics store, an online shop,
or our service center.
Note
See the "Connections" section for details about cable connections.
Remote Control
Note
The performance of the remote control may be affected by a TV or other electronic device
operating near the LCD Display , causing a malfunction due to interference with the frequen-
cy.
A TV tuner box (sold separately) must be connected to use the TV. (US Only)
Turns the product On/Off.
POWER
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Turns the product Off.
OFF
Used to enter the password during the OSD adjustment or
to use MagicInfo.
Number Buttons
Press to change the channel.
The "-" button is used to select Digital channels.
Electronic Program Guide (EPG) display.
- This function does not work for this LCD Display.
Adjusts the audio volume.
/ GUIDE button
+ VOL -
SOURCE
Selects a connected external input source or MagicInfo
mode.
Press the button to change the input signal SOURCE.
Changing the SOURCE is only allowed for external devices
that are connected to the LCD Display at the time.
DTV menu display
D.MENU
- This function does not work for this LCD Display.
Use to quickly select frequently used functions.
- This function does not work for this LCD Display.
TOOLS
Moves from one menu item to another horizontally, vertically
or adjusts selected menu values.
Up-Down Left-Right but-
tons
Current picture information is displayed on the upper left
corner of the screen.
INFO
Enables or disables TTX in TV mode.
The Color button and the
PC/DVI/HDMI/DP selection
button
You can select the PC, DVI, HDMI or DP(DisplayPort) ex-
ternal input directly in a mode other than TV mode.
TV channels provide written information services via tele-
text.
TTX/MIX
- Teletext Buttons
- This is activated when a TV tuner box is installed.
MTS-
MTS/DUAL
You can select MTS (Multichannel Television Stereo) mode.
Audio Type
Mono
MTS/S_Mode
Mono
Default
FM Stereo
Manual
Change
Stereo
SAP
Mono ↔ Stereo
Mono ↔ SAP
Mono
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
DUAL-
STEREO/MONO, DUAL l / DUAL ll and MONO/NICAM
MONO/NICAM STEREO can be operated depending on the
broadcasting type by using the DUAL button on the remote
control while watching TV.
- This is activated when a TV tuner box is installed.
This button is used to return to the immediately previous
channel.
ENTER/PRE-CH
MUTE
- This is activated when a TV tuner box is installed.
Pauses (mutes) the audio output temporarily. This is dis-
played on the lower left corner of the screen. The audio
comes back on if MUTE or - VOL + is pressed in the Mute
mode.
In TV mode, selects TV channels.
CH/P
- This is activated when a TV tuner box is installed.
Selects the TV mode directly.
TV
- This is activated when a TV tuner box is installed.
Opens the on-screen menu and exits from the menu or
closes the adjustment menu.
MENU
Returns to the previous menu.
Exits from the menu screen.
RETURN
EXIT
MagicInfo Quick Launch Button.
MagicInfo
Note
This button is disabled for products that do not support
MagicInfo.
User Installation Guide
Note
•
•
Be sure to call an installation expert of Samsung Electronics to install the product.
The warranty becomes invalid if the product is installed by someone other than a profes-
sional authorized by Samsung Electronics.
•
A Samsung Electronics service center can provide details.
Tilt Angle and Rotation
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
1
1. The product can be tilted up to 15 degrees from a vertical wall.
Ventilation requirement
1. Vertical wall mount condition
<Side view>
A : min. 40 mm
B: Ambient temperature Measuring point <35°C
•
When installing the product onto a vertical wall, be sure there is a 40 mm space or more
behind the product for ventilation, as shown above, and maintain the ambient temperature
at 35°C or lower.
Note
A Samsung Electronics service center can provide details.
2. Embedded Mount guide
<Side view>
<Top view>
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
A : min. 40 mm
B : min. 70 mm
C : min. 50 mm
D : min. 50 mm
E : Ambient temperature Measuring point <35°C
•
When embedding the product in a wall, be sure there is some space behind the product
for ventilation, as shown above, and maintain the ambient temperature at 35°C or lower.
Note
A Samsung Electronics service center can provide details.
3. Floor mount guide
<Side view>
A : min. 50 mm
B: Ambient temperature Measuring point <20°C
•
When embedding the product in the floor, be sure there is a 50 mm space or more behind
the product for ventilation, as shown above, and maintain the ambient temperature at 20°
C or lower.
Note
A Samsung Electronics service center can provide details.
Mechanical Layout
400UXN-3, 400UX-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
460UXN-3, 460UX-3
Installation VESA Bracket
•
•
When installing VESA, make sure to comply with the international VESA standards.
Purchasing VESA Bracket and Installation Information : Please contact your nearest
SAMSUNG Distributor to place an order. After your order is placed, installation profes-
sionals will visit you and install the bracket.
•
•
At least 2 persons are needed in order to move the LCD Display.
SAMSUNG is not responsible for any product damage or any injury caused by installation
at customer's discretion.
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Dimensions
400UXN-3, 400UX-3
460UXN-3, 460UX-3
Notice
For securing the bracket on a wall, use only machine screws of 6 mm diameter and 8 to 12
mm length.
Accessories (sold separately)
•
Dimension with optional stand
400UXN-3, 400UX-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
460UXN-3, 460UX-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
•
Dimension with welcome board
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
•
Dimension with other accessories
Wall Bracket Installation
•
Contact a technician for installing the wall bracket.
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
•
•
SAMSUNG Electronics is not responsible for any damages to the product or harm to
customers when the installation is done by the customer.
This product is for installing on cement walls. The product may not stay in place when
installed on plaster or wood.
Components
Only use the components and accessories shipped with the product.
Wall Bracket(1)
Hinge(Left 1, Right Plastic Screw Screw Anchor
1)
Hanger (A)(11) (B)(4)
(4)
(11)
To mount the product on the wall bracket
The shape of the product may vary depending on the model. (The assemblies of the plastic
hanger and the screw are the same)
1. Remove the 4 screws on the back of the product.
2. Insert the screw B into the plastic hanger.
Notice
•
•
•
Mount the product on the wall bracket and make sure it is properly fixed to the left
and right plastic hangers.
Be careful when installing the product on the bracket as fingers can be caught in the
holes.
Make sure the wall bracket is securely fixed to the wall, or the product may not stay
in place after installation.
3. Tighten the 4 screws in step 2 (plastic hanger + screw B)to the rear holes of the product.
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
4. Remove safety pin (3) and insert the 4 product holders into the corresponding bracket
holes (1). Then place the product(2) so that it is firmly fixed to the bracket. Make sure to
re-insert and tighten the safety pin (3) to securely hold the product to the bracket.
A -
B -
C -
LCD Display
Wall Bracket
Wall
Wall Bracket Angle Adjustment
Adjust the bracket angle to -2° before installing it on the wall.
1. Fix the product to the wall bracket.
2. Hold the product at the top in the center and pull it forward (direction of the arrow) to
adjust the angle.
Note
You can adjust the bracket angle between -2° and 15°.
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Make sure to use the top center, and not the left or the right side of the product to adjust the
angle.
Remote Control (RS232C)
Cable connections
interface
pin
RS232C(9 pin)
TxD(No.2) RxD(No.3) GND(No.5)
Bits rate
Data Bits
Parity
9600 bps
8 bit
None
Stop Bits
Flow control
Maximum length
1 bit
None
15 m (only shielded type)
•
Pin assignment
Pin
1
Signal
Data Carrier Detect
Received Data
Transmitted Data
Data Terminal Ready
Signal Ground
Data Set Ready
Request to Send
Clear to Send
2
3
4
5
6
7
8
9
Ring Indicator
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
•
RS232C cable
Connector : 9-pin D-Sub
Cable : Cross (reversed) cable
-P1-
-P1-
2
-P2-
3
-P2-
FEMALE
Rx
Tx
--------->
Rx
Tx
FEMALE
3
5
<---------
----------
2
5
Gnd
Gnd
•
Connecting method
Control codes
•
Get control
Header
0xAA
command
DATA Length
0
ID
CheckSum
command type
•
Set control
Header
command
DATA
DATA
Length
ID
CheckSum
0xAA
command
type
1
Value
•
commanding words
No. command type
command
Value range
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
1
2
3
4
5
6
7
8
9
Power control
0x11
0x12
0x14
0x18
0x19
0x3C
0x3D
0x5C
0x5D
0~1
0~100
-
Volume control
Input source control
Screen Mode control
Screen Size control
PIP on/off control
Auto adjustment control
Video wall Mode control
Safety Lock
-
0~255
0~1
0
0~1
0~1
- ID should show hexadecimal value of assigned ID, but ID 0 should be 0xFF.
- Every communication will be made in hexadecimals and Checksum is the sum of all
remainings. If it exceeds two digits,for example, it is 11+FF+01+01=112, discard the
number in the first digit like below.
example)PowerOn&ID=0
Header
command
DATA
DATA 1
Length
ID
ID
CheckSum
12
0xAA
0x11
1
Power
Header
command
DATA
Length
DATA 1
0xAA
0x11
1
1
If you want to control every mechanism connected with Serial Cable regardless of its ID,
set ID part to "0xFE" and send commands. At the time, each product will follow commands
but it will not respond with ACK.
•
Power Control
•
Function
Personal Computer turns TV or Monitor power ON/OFF.
•
Get Power ON/OFF Status
Header
0xAA
command
0x11
DATA Length
0
ID
CheckSum
CheckSum
•
Set Power ON/OFF
Header
0xAA
command
0x11
DATA
DATA
Length
ID
1
Power
Power : Power code to be set on TV or Monitor
1 : Power ON
0 : Power OFF
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
•
Ack
Header
0xAA
com-
mand
DATA
Length
Ack/Nak r-CMD
‘A’ 0x11
Val1
Check
Sum
ID
0xFF
3
Power
Power : Same as above
Nak
•
com-
Header
DATA
Length
Ack/Nak r-CMD
‘N’ 0x11
Val1
ERR
Check
Sum
mand
ID
0xAA
0xFF
3
ERR : Error code that shows what occurred error is
•
Volume Control
•
Function
Personal Computer changes volume of
TV or Monitor.
•
Get Volume Status
Header
0xAA
command
0x12
DATA Length
0
ID
CheckSum
CheckSum
•
•
•
Set Volume
Header
command
0x12
DATA
DATA
Length
ID
0xAA
1
Volume
Volume : Volume value code to be set onTV or Monitor(0 ~ 100)
Ack
com-
mand
DATA
Length
Header
0xAA
Ack/Nak r-CMD
‘A’ 0x12
Val1
Check
Sum
ID
0xFF
3
Volume
Volume : Same as above
Nak
com-
mand
DATA
Length
Header
Ack/Nak r-CMD
‘N’ 0x12
Val1
ERR
Check
Sum
ID
0xAA
0xFF
3
ERR : Error code that shows what occurred error is
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
•
Input Source Control
•
Function
TV or Monitor
Personal Computer changes input source of
Get Input Source Status
.
•
Header
0xAA
command
0x14
DATA Length
0
ID
CheckSum
CheckSum
•
Set Input Source
Header
0xAA
command
0x14
DATA
DATA
Length
ID
1
Input Source
Input Source : Input Source code to be set on TV or Monitor
0x14
0x1E
0x18
0x0C
0x04
0x08
0x20
0x1F
0x30
0x40
0x21
0x22
0x23
0x24
0x25
PC
BNC
DVI
AV
S-Video
Component
MagicInfo
DVI_VIDEO
RF(TV)
DTV
HDMI1
HDMI1_PC
HDMI2
HDMI2_PC
DisplayPort
Caution
DVI_VIDEO, HDMI1_PC, HDMI2_PC → Get Only
In the case of MagicInfo, only possible with models include MagicInfo
In the case of TV, only possible with models include TV.
•
Ack
com-
mand
DATA
Length
Check
Sum
Header
Ack/Nak r-CMD
Val1
ID
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
3
Input
Source
0xAA
0xFF
‘A’
0x14
Input Source : Same as above
Nak
•
com-
mand
DATA
Length
Header
Ack/Nak r-CMD
‘N’ 0x14
Val1
ERR
Check
Sum
ID
0xAA
0xFF
3
ERR : Error code that shows what occurred error is
•
Screen Mode Control
•
Function
Personal Computer changes "Screen Mode" of TV or Monitor.
Cannot be controlled when Video Wall is on.
Caution
Only works with models include TV.
Get Screen Mode Status
•
•
Header
0xAA
command
0x18
DATA Length
0
ID
CheckSum
CheckSum
Set Picture Size
Header
0xAA
command
0x18
DATA
DATA
Length
ID
1
Screen
Mode
Screen Mode : Screen Mode code to be set onTV or Monitor
0x01
0x04
0x31
0x0B
16 : 9
Zoom
Wide Zoom
4 : 3
•
Ack
com-
mand
DATA
Length
Header
0xAA
Ack/Nak r-CMD
‘A’ 0x18
Val1
Check
Sum
ID
Screen
Mode
0xFF
3
Screen Mode : Same as above
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
•
Nak
com-
mand
DATA
Length
Header
0xAA
Ack/Nak r-CMD
‘N’ 0x18
Val1
ERR
Check
Sum
ID
0xFF
3
ERR : Error code that shows what occurred error is
•
Screen Size Control
•
Function
Personal Computer recognizes the screen size of TV or Monitor.
•
Get Screen Size Status
Header
0xAA
command
0x19
DATA Length
0
ID
CheckSum
•
Ack
com-
mand
DATA
Length
Header
0xAA
Ack/Nak r-CMD
‘A’ 0x19
Val1
Check
Sum
ID
Screen
Size
0xFF
3
Screen Size : Screen Size of TV or Monitor (Range : 0 ~ 255, Unit : Inch)
•
Nak
com-
mand
DATA
Length
Header
0xAA
Ack/Nak r-CMD
‘N’ 0x19
Val1
ERR
Check
Sum
ID
0xFF
3
ERR : Error code that shows what occurred error is
•
PIP ON / OFF Control
•
Function
The PC turns the PIP function of a TV or Monitor ON / OFF.
This does not operate in MagicInfo mode.
•
Get the PIP ON / OFF Status
Header
0xAA
command
0x3C
DATA Length
0
ID
CheckSum
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
•
Set the PIP ON / OFF
Header
0xAA
command
0x3C
DATA
Length
DATA
PIP
ID
CheckSum
1
PIP : The PIP ON / OFF code to set for the TV or Monitor
1 : PIP ON
0 : PIP OFF
•
Ack
com-
mand
DATA
Length
Header
0xAA
Ack/Nak r-CMD
‘A’ 0x3C
Val1
PIP
Check
Sum
ID
0xFF
3
PIP : Same as above
Nak
•
com-
Header
DATA
Length
Ack/Nak r-CMD
‘N’ 0x3C
Val1
ERR
Check
Sum
mand
ID
0xAA
0xFF
3
ERR : Error code that shows what occurred error is
•
Auto Adjustment Control (PC, BNC Only)
•
•
•
Function
Personal Computer controls PC system screen automatically.
Get Auto Adjustment Status
None
Set Auto Adjustment
Header
0xAA
command
0x3D
DATA
Length
DATA
ID
CheckSum
1
Auto Adjust-
ment
Auto Adjustment : 0x00 (Always)
•
Ack
com-
mand
DATA
Length
Check
Sum
Header
Ack/Nak r-CMD
Val1
ID
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
3
Auto Ad-
justment
0xAA
0xFF
‘A’
0x3D
•
Nak
com-
mand
DATA
Length
Header
0xAA
Ack/Nak r-CMD
‘N’ 0x3D
Val1
ERR
Check
Sum
ID
0xFF
3
ERR : Error code that shows what occurred error is
•
Video Wall Mode Control
•
Function
Personal Computer converts Video Wall Mode of TV or Monitor when Video Wall is ON.
Only works with TV or Monitor where Video Wall is on.
Does not operate in MagicInfo
•
•
Get Video Wall Mode
Header
0xAA
command
0x5C
DATA Length
0
ID
CheckSum
Set Video Wall Mode
Header
0xAA
command
0x5C
DATA
Length
DATA
ID
CheckSum
1
Video Wall
Mode
Video Wall Mode : Video Wall Mode code to be set on TV or Monitor
1 : Full
0 : Natural
•
Ack
com-
mand
DATA
Length
Header
0xAA
Ack/Nak r-CMD
Val1
Check
Sum
ID
Video
Wall
0xFF
3
‘A’
0x5C
Mode
Video Wall Mode : same as above
Nak
•
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
com-
mand
DATA
Length
Header
0xAA
Ack/Nak r-CMD
‘N’ 0x5C
Val1
ERR
Check
Sum
ID
0xFF
3
ERR : Error code that shows what occurred error is
•
Safety Lock
•
•
•
Function
Personal Computer turns Safety Lock function of TV or Monitor ON / OFF.
Can operate regardless of whether power is ON / OFF.
Get Safety Lock Status
Header
0xAA
command
0x5D
DATA Length
0
ID
CheckSum
CheckSum
Set Safety Lock Enable / Disable
Header
0xAA
command
0x5D
DATA
DATA
Length
ID
1
Safety Lock
Safety Lock : Lock code to be set on TV or Monitor
1 : ON
0 : OFF
•
Ack
com-
mand
DATA
Length
Header
0xAA
Ack/Nak r-CMD
‘A’ 0x5D
Val1
Safety
Check
Sum
ID
0xFF
3
Lock
Safety Lock : Same as above
Nak
•
com-
Header
DATA
Length
Ack/Nak r-CMD
‘N’ 0x5D
Val1
mand
Check
Sum
ID
Safety
Lock
0xAA
0xFF
3
ERR : Error code that shows what occurred error is
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting a Computer
There are several ways to connect the computer to the monitor. Choose
one from the following options.
Using the D-sub (Analog) connector on the video card.
•
Connect the D-sub to the 15-pin, [RGB/COMPONENT IN] port on the
back of your LCD Display and the 15 pin D-sub Port on the computer.
Using the DVI (Digital) connector on the video card.
•
Connect the DVI Cable to the [DVI IN] port on the back of your LCD
Display and the DVI port on the computer.
Using the DP (Digital) connector on the video card.
•
Connect the [DP IN] port on the LCD Display to the DP port on the PC
using the DP cable.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Using the HDMI (Digital) connector on the video card.
•
Connect the [HDMI IN 1] port on the LCD Display to the HDMI port on
the PC using the HDMI cable.
Note
Select HDMI2 (only with a 400UX-3, 460UX-3 model) or HDMI1 as an input
source when connected to the PC via an HDMI cable.
400UX-3, 460UX-3 model) or HDMI1 must be selected before PC is se-
lected in Edit Name.
To enable audio when DVI Device is selected, be sure to establish the
connection using step ( ).
Connect the Audio cable for your LCD Display to the Audio port on the
back of the LCD Display.
Connect the power cord for your LCD Display to the Power port on the
back of the LCD Display. Turn on the power switch.
Note
Contact a local SAMSUNG Electronics Service Center to buy optional items.
Connecting to Other devices
Note
•
•
AV input devices such as DVD players, VCRs or camcorders as well as your computer
can be connected to the LCD Display. For detailed information on connecting AV input
devices, refer to the contents under Adjusting Your LCD Display.
The LCD Display 's configuration at the back may vary slightly depending on the LCD
Display model.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting an External Monitor
Connect between the [DVI OUT(LOOPOUT)] port on the LCD Display and
the input port on another monitor using a DVI cable.
Connect between the [AUDIO OUT] port on the LCD Display and the audio
input port on another monitor using a stereo cable.
Note
•
•
Select DVI Mode as an input source for the external monitor connected to [DVI OUT].
DVI OUT does not support HDCP.
Connecting AV Devices
1. Connect an audio cable to [AV/COMPONENT AUDIO IN [R-AUDIO-L]]
on the product and the audio port on an external device such as a VCR or
DVD player.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
2. Connect a video cable to [AV IN] on the product and the video output port
on the external device.
3. Then, start the DVD, VCR or Camcorders with a DVD disc or tape inserted.
4. Press SOURCE on the product or remote control and select "AV".
Note
AV input devices such as DVD players, VCRs or camcorders as well as your computer can
be connected to the LCD Display. For detailed information on connecting AV input devices,
refer to the contents under Adjusting Your LCD Display.
Connecting to a Camcorder
1. Locate the AV output jacks on the camcorder. They are usually found on
the side or back of the camcorder. Connect a video cable between the
VIDEO OUTPUT jack on the camcorder and the [AV IN] on the LCD Dis-
play .
2. Connect a set of audio cables between the AUDIO OUTPUT jacks on the
camcorder and the [AV /COMPONENT AUDIO IN [R-AUDIO-L]] on the
LCD Display .
3. Press SOURCE on the product or remote control and select "AV".
4. Then, start the Camcorders with a tape inserted.
Note
The audio-video cables shown here are usually included with a Camcorder.
(If not, check your local electronics store.)
If your camcorder is stereo, you need to connect a set of two cables.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting Using a HDMI Cable
1. Connect an HDMI cable to [HDMI IN 2 (MAGICINFO)] (only with a
400UX-3, 460UX-3 model) or [HDMI IN 1] on the product and the HDMI
output port on a digital device.
2. Press SOURCE on the product or remote control and select "HDMI1 /
HDMI2(only with a 400UX-3, 460UX-3 model)"
Note
In HDMI mode, only PCM format audio is supported.
Connecting Using a DVI to HDMI Cable
Connect a DVI-HDMI cable to [HDMI IN 2 (MAGICINFO)] (only with a
400UX-3, 460UX-3 model) or [HDMI IN 1] and the DVI output port on the
digital device.
Connect the red and white jacks of an RCA to stereo (for PC) cable to the
same colored audio output terminals of the digital output device, and con-
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
nect the opposite jack to the [RGB/DVI/DP/HDMI AUDIO IN] terminal of
the LCD Display.
3. Press SOURCE on the product or remote control and select "HDMI1 /
HDMI2(only with a 400UX-3, 460UX-3 model)"
Connecting a DVD Player
Connect a RGB to Component cable between the [RGB/COMPONENT
IN] port on the LCD Display and the PR, Y, PB jacks on the DVD player.
Connect a set of audio cables between the [AV/COMPONENT AUDIO IN
[R-AUDIO-L]] on the LCD Display and the AUDIO OUT jacks on the DVD
player.
Note
•
•
•
•
Press SOURCE on the product or remote control and select "Component".
Then, start the DVD Player with a DVD disc inserted.
A RGB to component cable is optional.
For an explanation of Component video, consult your DVD manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting a DTV Set Top (Cable/Satellite) Box
Connect a RGB to Component cable between the [RGB/COMPONENT
IN] port on the LCD Display and the PR, Y, PB jacks on the Set Top Box.
Connect a set of audio cables between the [AV/COMPONENT AUDIO IN
[R-AUDIO-L]] on the LCD Display and the AUDIO OUT jacks on the Set
Top Box.
Note
•
•
Press SOURCE on the product or remote control and select "Component".
For an explanation of Component video, see your Set Top Box owner's manual.
Connecting to an Audio System
1. Connect a set of audio cables between the AUX L, R jacks on the AUDIO
SYSTEM and [AUDIO OUT] on LCD Display.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting a LAN Cable
1. Connect the LAN cable between the [LAN] port on the product and the
[LAN] port on your PC.
Note
Applicable to the 400UXN-3, 460UXN-3 model only.
Connecting a USB devices
1. You can connect USB devices such as a mouse or keyboard.
Note
Applicable to the 400UXN-3, 460UXN-3 model only.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Software
Monitor Driver
Note
When prompted by the operating system for the monitor driver, insert the CD-
ROM included with this monitor. Driver installation is slightly different from one
operating system to another. Follow the directions appropriate for the oper-
ating system you have.
Prepare a blank disk and download the driver program file at the Internet web
site shown here.
Internet web site :
Installing the Monitor Driver (Automatic)
1. Insert CD into the CD-ROM drive.
3. Choose your monitor model in the model list, then click the "OK" button.
4. If you can see following message window, then click the "Continue Anyway" button. Then
click "OK" button (Microsoft® Windows® XP/2000 Operating System).
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Software
Note
This monitor driver is certified by Microsoft, and installing it will not damage your system.
The certified driver will be posted on Samsung Monitor homepage.
Installing the Monitor Driver (Manual)
Microsoft® Windows Vista™‚ Operating System
1. Insert your Manual CD into your CD-ROM drive.
2.
Click
(Start) and "Control Panel". Then, double-click on "Appearance and Personal-
ization".
3. Click "Personalization" and then "Display Settings".
4. Click "Advanced Settings...".
5. Click "Properties" in the "Monitor" tab. If the "Properties" button is deactivated, it means
the configuration for your monitor is completed. The monitor can be used as is.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Software
If the message "Windows needs..." is displayed, as shown in the figure below, click
"Continue".
Note
This monitor driver is under certifying MS logo, and this installation will not damage your
system.
The certified driver will be posted on Samsung Monitor homepage.
6. Click "Update Driver..." in the "Driver" tab.
7. Check the "Browse my computer for driver software" checkbox and click "Let me pick
from a list of device drivers on my computer".
8. Click "Have Disk...” and select the folder (for example, D:\Drive) where the driver setup
file is located, and click "OK".
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Software
9. Select the model that matches your monitor from the list of monitor models on the screen,
and click "Next".
10. Click "Close" → "Close" → "OK" → "OK" on the following screens displayed in sequence.
Microsoft® Windows® XP Operating System
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Software
1. Insert CD into the CD-ROM drive.
2. Click "Start" → "Control Panel", then click the "Appearance and Themes" icon.
3. Click "Display" icon and choose the "Settings" tab then click "Advanced...".
4. Click the "Properties" button on the "Monitor" tab and select "Driver" tab.
5. Click "Update Driver..." and select "Install from a list or..." then click "Next" button.
6. Select "Don't search, I will...", then click "Next" and then click "Have disk".
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Software
7. Click the "Browse" button then choose A:(D:\Driver) and choose your monitor model in
the model list and click the "Next" button.
8. If you can see the following message window, then click the "Continue Anyway" button.
Then click "OK" button.
Note
This monitor driver is certified by Microsoft, and this installation will not damage your
system.
The certified driver will be posted on Samsung Monitor homepage.
9. Click the "Close" button, then click the "OK" button continually.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Software
10. Monitor driver installation is completed.
Microsoft® Windows® 2000 Operating System
When you can see "Digital Signature Not Found" on your monitor, follow these steps.
1. Choose "OK" button on the "Insert disk" window.
2. Click the "Browse" button on the "File Needed" window.
3. Choose A:(D:\Driver), then click the "Open" button and then click "OK" button.
How to install
1. Click "Start", "Setting", "Control Panel".
2. Double click the "Display" icon.
3. Select the "Settings" tab and click "Advanced Properties" button.
4. Choose "Monitor".
Case1 : If the "Properties" button is inactive, it means your monitor is properly configured.
Please stop installation
Case2 : If the "Properties" button is active, click the "Properties" button, then follow the
next steps.
5. Click "Driver" and then click on "Update Driver...", then click on the "Next" button.
6. Choose "Display a list of the known drivers for this device so that I can choose a specific
driver", then click "Next" and then click "Have disk".
7. Click the "Browse" button, then choose A:(D:\Driver).
8. Click the "Open" button, then click "OK" button.
9. Choose your monitor model and click the "Next" button. Then click "Next" button.
10. Click the "Finish" button, then the "Close" button.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Software
If you can see the "Digital Signature Not Found" window, then click the "Yes" button.
Then click the "Finish" button and the "Close" button.
Microsoft® Windows® Millennium Operating System
1. Click "Start", "Setting", "Control Panel".
2. Double click the "Display" icon.
3. Select the "Settings" tab and click "Advanced Properties" button.
4. Select the "Monitor" tab.
5. Click the "Change" button in the "Monitor Type" area.
6. Choose "Specify the location of the driver".
7. Choose "Display a list of all the driver in a specific location...", then click "Next" button.
8. Click the "Have Disk" button.
9. Specify A:\(D:\driver), then click "OK" button.
10. Select "Show all devices" and choose the monitor that corresponds to the one you con-
nected to your computer and click "OK".
11. Continue choosing "Close" button and "OK" button until you close the Display Properties
dialogue box.
Microsoft® Windows® NT Operating System
1. Click "Start", "Settings", "Control Panel", and then double-click "Display" icon.
2. In Display Registration Information window, click Settings Tab and then click "All Display
Modes".
3. Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency)
and then click "OK".
4. Click "Apply" button if you see the screen working normally after clicking "Test". If the
screen is not normal, change to a different mode (lower mode of resolution, colors or
frequency).
Note
If there is no Mode at All Display Modes, select the level of resolution and vertical frequency
by referring to the Preset Timing Modes in the user guide.
Linux Operating System
To execute X-Window, you need to make the X86Config file, which is a type of system setting
file.
1. Press "Enter" at the first and the second screen after executing the X86Config file.
2. The third screen is for setting your mouse.
3. Set a mouse for your computer.
4. The next screen is for selecting a keyboard.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Software
5. Set a Keyboard for your computer.
6. The next screen is for setting your monitor.
7. First of all, set a horizontal frequency for your monitor. (You can enter the frequency
directly.)
8. Set a vertical frequency for your monitor. (You can enter the frequency directly.)
9. Enter the model name of your monitor. This information will not affect the actual execution
of X-Window.
10. You have finished setting up your monitor. Execute X-Window after setting other re-
quested hardware.
Download from Www.Somanuals.com. All Manuals Search And Download.
MDC Program Installation/Uninstallation
Installation
1
2
Insert the installation CD into the CD-ROM drive.
Click the MDC Unified installation program.
If a software installation window is not displayed on the main screen, install with the "MDC Unified"
execution file in the MDC folder on the CD.
3
4
Click "Next" in the displayed Installation Wizard screen.
In the "License Agreement" window displayed, select "I accept the terms in the license agreement"
and click "Next".
5
6
In the displayed "Customer Information" window, fill out all the information fields and click "Next".
In the displayed "Destination Folder" window, select the directory path you want to install the
program in and click "Next".
If the directory path is not specified, the program will be installed in the default directory path.
7
In the displayed "Ready to Install the Program" window, check the directory path to install the
program in and click "Install".
8
9
Installation progress will be displayed.
Click "Finish" in the displayed "InstallShield Wizard Complete" window.
Select "Launch MDC Unified" and click "Finish" to run the MDC program immediately.
10 The MDC Unified shortcut icon will be created on the desktop after installation.
The MDC execution icon may not be displayed depending on the PC system or product
specifications.
Press F5 if the execution icon is not displayed.
Uninstallation
1
2
Select Settings > Control Panel on the Start menu and double-click Add/Delete Program.
Select MDC Unified from the list and click Change/Remove.
MDC installation can be affected by the graphics card, mother board and network conditions.
Download from Www.Somanuals.com. All Manuals Search And Download.
What is MDC?
Multiple display control "MDC" is an application that allows you to easily control multiple display devices
simultaneously using a PC.
Connecting to MDC
Using MDC via RS-232C (serial data communications standards)
An RS-232C serial cable must be connected to the serial ports on the PC and monitor.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using MDC via Ethernet
Enter the IP for the primary display device and connect the device to the PC. One display device can
connect to another using an RS-232C serial cable.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection Management
Connection management includes the Connection list and Connection list modification options.
Connection list – Connection list shows the details of the connections such as connection setting (IP/
COM, Port No, MAC, and Connection Type), connection status, Set ID Range, and detected devices.
Each connection can contain a maximum of 100 devices connected in serial daisy-chain fashion. All the
LFDs detected in a connection are displayed in the Device list, where the user can make groups and
send commands to detected devices.
Connection list modification options – Connection modification options includes Add, Edit, Delete,
and Refresh.
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Set ID
Auto Set ID feature assigns a Set ID for all the LFDs connected in daisy-chain of a selected connection.
There can be a maximum of 100 LFDs in a connection. The Set ID is assigned sequentially in the daisy-
chain running from 1 to 99, and then finally to Set ID 0.
Cloning
Using the Cloning feature, you can copy the setting of one LFD and apply it to multiple selected LFDs.
You can select specific tab categories or all tab categories for cloning, using the copy setting option
window.
Download from Www.Somanuals.com. All Manuals Search And Download.
Command Retry
This feature is used to specify the maximum number of times the MDC command will be retried in case of
there being no reply or a corrupted reply from an LFD. The retry count value can be set using the MDC
options window. The retry count value must be between 1-10. The default value is 1.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started with MDC
1
To start the program, click Start
Programs
Samsung
MDC Unified.
2
Click Add to add a display device.
ꢀ
If the connection is established via RS232C, go to Serial and specify the COM Port.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ
If the connection is established via Ethernet, enter the IP that was entered for the display
device.
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Screen Layout
1
6
5
4
2
3
Change the status of a display device or the properties of the program.
View a list of connected display devices or device groups.
View a list of schedules for display devices.
1
Menu Bar
2
Device Category
3
Schedule Category
Select the display device you want to adjust.
Add, edit, regroup or delete sets.
4
Set List
5
Modify the Set List
Display help topics for the program.
6
Help Topics
Download from Www.Somanuals.com. All Manuals Search And Download.
Menus
You can power on or off a selected device or change the input source or volume of the device.
Choose display devices from the list of sets, and select the Home tab.
1
Home
Select an item and change the corresponding setting.
Power
ꢀ
On: Power on a selected display.
ꢀ
Off: Power off a selected dis
Input
Input Source : Change the input source.
ꢀ
"
"
Input sources available can vary depending on the Display Device Models.
The input source can be changed only for displays that are turned on.
ꢀ
Channel : Change the channel.
"
"
"
The TV channel can be changed by using the up/down arrow keys.
The channel can be changed only when the input source is TV.
Only registered channels can be selected.
2
Volume
The volume can be changed or the sound can be muted only for displays that are turned on.
Volume
"
The volume can be adjusted using the slider bar in the range of 0 to 100.
Adjust the volume of a selected display.
Input
"
Enable or disable Mute for a selected display.
Mute will automatically be disabled if Volume is adjusted when Mute is on.
3
Alert
ꢀ
Fault Device
Download from Www.Somanuals.com. All Manuals Search And Download.
"
This menu shows a list of display devices which have following errors - fan error, temperature
error, brightness sensor error, or lamp error.
Select a display device from the list. The Repair button will be enabled. Click the refresh button
to refresh the error status of the display device. The recovered display device will disappear
from the Fault Device List.
Fault Device Alert
"
Display device in which error is detected will be reported by email.
Fill in all required fields. The Test and OK buttons will be enabled. Ensure the Sender
information and at least one Recipient are entered.
Download from Www.Somanuals.com. All Manuals Search And Download.
Screen Adjustment
The screen settings (contrast, brightness, etc.) can be adjusted.
Choose display devices from the list of sets, and select the Picture tab.
Custom
Select an item and change the corresponding screen setting.
ꢀ
ꢀ
ꢀ
Color and Tint are not available if the input source is PC.
Red, Green, Blue and PC Screen Adjustment are not available if the input source is Video.
Color, Tint, Color Tone, Color Temp, Red, Green, Blue and PC Screen Adjustment are not
available if both PC Source and Video Source are selected.
Contrast
ꢀ
Adjust the contrast for the selected display device.
Brightness
ꢀ
Adjust the brightness for the selected display device.
Color
ꢀ
Adjust the colors for the selected display device.
Tint (G/R)
ꢀ
Adjust the tint for the selected display device.
Color Tone
ꢀ
Adjust the background color tone for the selected display device.
Color Temp
ꢀ
Adjust the color temperature for the selected display device.
This option is enabled if Color Tone is set to Off.
Red
ꢀ
Customize the intensity of red color for the selected display device.
Green
ꢀ
Customize the intensity of green color for the selected display device.
Blue
ꢀ
Customize the intensity of blue color for the selected display device.
Download from Www.Somanuals.com. All Manuals Search And Download.
Options
Dynamic Contrast
Adjust the Dynamic Contrast for the selected display device.
Gamma Control
Change the gamma value for the selected display.
Auto Motion Plus
This option is used to view dynamic images.
ꢀ
ꢀ
ꢀ
ꢀ
Off: Disable the Auto Motion Plus function.
Clear: Set the level of Auto Motion Plus to clear. This mode is suitable to display vivid images.
Standard: Set the level of Auto Motion Plus to standard.
Smooth: Set the level of Auto Motion Plus to smooth. This mode is suitable to display smooth
images.
ꢀ
ꢀ
Custom: Customize the level of screen burn-in or flickering.
Demo: This function demonstrates the technology of Auto Motion Plus. The result when the mode
is changed can be previewed on the left side of the window.
Brightness Sensor
Enable or disable the Brightness Sensor for the selected display device.
The Brightness Sensor detects the ambient light intensity and automatically adjusts the screen
brightness.
Brightness Sensor may not be available depending on the product.
Download from Www.Somanuals.com. All Manuals Search And Download.
Size
Picture Size
Adjust the screen size for the selected display device.
The Detail item will be disabled if Picture Size is set to a mode that does not support detailed
configuration.
The -/+ buttons can be used to adjust Zoom.
The screen can be relocated using the up/down/left/right buttons.
Detail
You can view details of the selected screen size.
PC Screen Adjustment
Frequency adjustment or fine-tuning is available by using the -/+ buttons in Coarse or Fine.
To relocate the screen, click one of the four images below Position.
To automatically adjust the frequency, fine-tune or relocate the screen, click Auto Adjustment.
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Adjustment
You can change the sound settings.
Choose display devices from the list of sets, and select the Sound tab.
The Bass or Treble item will be disabled if the item is not supported by the selected set.
Bass
Adjust the bass for the selected display.
Treble
Adjust the treble for the selected display.
Balance (L/R)
Adjust the volume of the left and right speakers of the selected display device.
SRS TS XT
Enable or disable the SRS TS XT effect for the selected display device.
Download from Www.Somanuals.com. All Manuals Search And Download.
System Setup
Choose display devices from the list of sets, and select the System tab.
Video Wall
The Video Wall function can be used to display part of a whole picture or repeat the same picture on
each of connected multiple display devices.
Video Wall is enabled only when devices are in the group.
Video Wall
Enable or disable Video Wall.
Format
Select the format to display the split screen.
Full
Natural
Download from Www.Somanuals.com. All Manuals Search And Download.
H
Select the number of horizontal display devices.
A maximum of 15 displays can be arranged in a row.
A maximum of 6 can be assigned to V if 15 is assigned to H.
V
Select the number of vertical display devices.
A maximum of 15 displays can be arranged in a row.
A maximum of 6 can be assigned to V if 15 is assigned to H.
Screen Position
View the layout of displays (configured by the screen divider) or change the layout as required.
Screen Position and Preview are enabled when Video Wall is set to on.
Note that if multiple sets are selected, Preview is enabled only if the settings for H and V match the
layout of the selected sets.
To change the Position, select a set and drag it to a new position.
The range of screen divider settings may differ depending on the model.
Download from Www.Somanuals.com. All Manuals Search And Download.
PIP
Basic information required to adjust PIP will appear in the menu screen.
ꢀ
ꢀ
PIP will be disabled when Video Wall is ON.
Note that Picture Size is disabled when PIP is ON.
PIP Size
View the PIP Size of the current display.
PIP Source
Select a PIP input source.
Sound Select
Select and enable the sound from either the primary screen or secondary screen.
Channel
The channel can be changed if PIP Source is TV.
Download from Www.Somanuals.com. All Manuals Search And Download.
General
User Auto Color
Automatically adjust the screen colors.
Available only in PC mode.
Auto Power
Set the product to automatically power on.
Standby Control
Set the standby mode to activate if an input source is not detected.
Fan & Temperature
Configure the settings required to detect the fan speed and internal temperature for the product's
protection.
Fan Control
Select a method to configure the fan speed.
Fan Speed
Configure the fan speed.
Temperature
Detect the internal temperature by specifying the range of temperature.
Download from Www.Somanuals.com. All Manuals Search And Download.
Security
Safety Lock
Lock the on-screen menus.
To unlock the menus, set Safety Lock to Off.
Button Lock
Lock the buttons on the display device.
To unlock the buttons, set Button Lock to Off.
OSD Display
Source OSD
Select whether to display a message when the Source is changed.
Not Optimum Mode OSD
Select whether to display a message when a non-compatible mode is selected.
No Signal OSD
Select whether to display a message when there is no input signal.
MDC OSD
Select whether to display a message when settings are changed by the MDC.
Download from Www.Somanuals.com. All Manuals Search And Download.
Time
Clock Set
Change the current time on the selected display device according to the time set on a PC.
If the time is not set on the display device, null values will be displayed.
Timer
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
On Time: Set the time to power on the selected display device.
Off Time: Set the time to power off the selected display device.
Volume: Specify the volume of the display device when it is powered on by On Time.
Source: Specify the input source of the display device when it is powered on by On Time.
Holiday: The Holiday Management settings can be applied to the Timer.
Repeat : Specify the period for which you want to repeat the selected Timer.
Download from Www.Somanuals.com. All Manuals Search And Download.
"
"
"
"
"
Once: Activate the timer only one time.
EveryDay: Activate the timer every day.
Mon~Fri: Activate the timer from Monday through Friday.
Mon~Sat: Activate the timer on Saturdays and Sundays.
Manual: Customize days of the week.
The checkboxes to select days of the week below Repeat are enabled only if Manual is selected.
Holiday Management
Holiday Management allows you to prevent devices that are set to be powered on by the Timer from
turning on at a specified date.
The Holiday Management function can be enabled or disabled in the Timer settings menu.
ꢀ
Add: You can specify holidays:
Click the Add button in the Holiday Management window.
ꢀ
ꢀ
Delete: Delete holidays: check the corresponding checkboxes and click this button.
List of holidays: View a list of holidays you have added.
Download from Www.Somanuals.com. All Manuals Search And Download.
Screen Burn Protection
Pixel Shift
Move the screen slightly at specified time intervals to prevent screen burn-in.
Screen Saver
This function prevents screen burn-in when the screen of the selected display device is left idle for an
extended period of time.
ꢀ
ꢀ
Interval: Set the interval to activate the Screen Saver.
Mode: The Time setting can vary for each Mode.
Safety Screen
Download from Www.Somanuals.com. All Manuals Search And Download.
The Safety Screen function can be used to prevent screen burn-in when a stationary image displays on
the screen of a display device for an extended period of time.
Lamp Control
Lamp Control is used to adjust the backlight to reduce power consumption.
Automatically adjust the backlight of the selected display device at a specified time.
If Manual Lamp Control is adjusted, Auto Lamp Control will automatically switch to Off.
Manually adjust the backlight for the selected display.
If Auto Lamp Control is adjusted, Manual Lamp Control will automatically switch to Off.
ꢀ
Ambient Light: Ambient Light detects ambient light intensity and automatically adjusts the screen
brightness of all the LFDs in the same serial chain.
Tool Settings
1
2
3
4
1
Security
Panel Control
Turn on or off the screen of a display device.
Remote Control
Enable or disable the remote control.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Reset
Reset Picture
Reset the screen settings.
Reset Sound
Reset the sound settings.
Reset System
Reset the system settings.
Reset All
Reset the screen, sound and system settings at the same time.
3
Edit Column
Select the items you want to display in the list of sets.
4
Information
View the program information.
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Functions
Resizing a Window
Place the mouse pointer on a corner of the program window. An arrow will appear. Move the arrow to
customize the size of the program window.
Download from Www.Somanuals.com. All Manuals Search And Download.
Group Management
Creating Groups
Create groups and manage the list of sets on a group basis.
Duplicate group names cannot be used.
1
2
Right-click and select Group>Edit in the display device list section on the left side of the program
window.
In the Edit Group window displayed, click Add on the sub level or Add on the same level.
ꢀ
Add on the sub level: Create a sub-group under the selected group.
ꢀ
Add on the same level: Create a group on the same level as the selected group.
Download from Www.Somanuals.com. All Manuals Search And Download.
The Add on the same level button is enabled only if at least one group is created.
Enter the group name.
3
Deleting Groups
1
2
Select a group name, and click Edit.
In the Edit Group window displayed, click Delete.
3
Click Yes. The group will be deleted.
Renaming Groups
1
2
Select a group name, and click Edit.
In the Edit Group window displayed, click Rename.
3
If a cursor appears in the old group name, enter a new group name.
Download from Www.Somanuals.com. All Manuals Search And Download.
Schedule Management
Creating Schedules
Create and register a schedule on a group basis.
1
Click All Schedule List in the schedule section on the left side of the program window. The Add
button will be enabled in the middle.
2
Click the Add button. The Add Schedule window will appear.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Click Add below the Device Group item, and select the group you want to add a schedule to.
4
Select Date&Time/Action and click OK. The schedule will be added and a list of schedules will
appear in the set list window.
ꢀ
Device Group: Select a group.
ꢀ
Date&Time
"
Instant Execution: Run the schedule immediately.
"
Timer Set the date, time and interval to run the schedule.
ꢀ
Action: Select a function that will activate at the specified time and interval.
Schedule Modification
To modify a schedule, select the schedule and click Edit.
Deleting a Schedule
To delete a schedule, select the schedule and click Delete.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Guide
Issue
Solution
The display you want to control
does not appear on the system
information chart.
1. Check the connection of the RS232C cable (check that the
cable is properly connected to appropriate serial port).
2. Check that another display with a duplicate ID is not
connected. Connecting displays with a duplicate ID can
cause the displays not to be shown due to data collision.
3. Check that the display ID is within the range of 0 and 99.
(Change the ID using the Display menu.)
For a display that supports the ID in a range of 0 to 99,
the ID should be set between 0 and 99.
The display you want to control
does not appear on the other
Control Info Grids.
Check that the display is powered on. (See the power status in
the system information chart.)
Ensure you select the input source the display is connected to.
Check that the display you want to control is selected.
The following message appears
repeatedly.
Displays power on or off at different Adjust the time on the PC to synchronize the time between the
time from one another even though connected displays.
On Time or Off Time is set.
The remote control does not work.
The remote control may not work if the RS-232C cable is
removed or the program is closed abnormally while the Remote
Control function is Disable. To resolve this, run the program
again and set Remote Control to Enable.
This program may malfunction sometimes due to a communication problem between the PC and
display or electromagnetic waves emitted from nearby electronic devices.
Download from Www.Somanuals.com. All Manuals Search And Download.
How display properties are shown when multiple displays are used
1
2
3
When no display is selected: The default value is displayed.
When one display is selected: Settings for the selected display are displayed.
When two displays are selected (e.g. in sequence of ID 1 andID 3): The settings for ID 1 are
displayed before the settings for ID 3.
4
When the All+Select checkbox is checked and all displays are selected: The default settings are
displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
Input
Available Modes
•
•
•
•
•
•
PC / DVI / DisplayPort
AV
Component
HDMI
MagicInfo
TV
Note
•
•
A TV tuner box (sold separately) must be connected to use the TV. (US Only)
For an 400UX-3, 460UX-3 model, MagicInfo can only be enabled when a network box is
connected.
Source List
Use to select PC, HDMI or other external input sources connected to the LCD Display. Use
to select the screen of your choice.
1. PC
2. DVI
3. AV
4. Component
5. HDMI1
6. HDMI2
7. DisplayPort
8. MagicInfo - Activated when a network box is connected. (400UX-3, 460UX-3)
9. TV - Activated when a TV tuner box is connected.
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
Note
The RGB/COMPONENT IN port is compatible with RGB (PC) and Component signals.
However, the picture may display abnormally if the connected external input signal is different
from the selected video signal.
PIP
Note
The PIP function is not available when Video Wall is On.
When external AV devices such as VCRs or DVDs are connected to the LCD Display , PIP
allows you to watch video from those devices in a small window super-imposed on the PC
Video signal. (Off/On)
Note
•
•
PIP turns off when the LCD Display is switched to an external source.
If you select in Size, Position and Transparency will not be activated.
,
,
PIP
Turns the PIP Screen Off/On.
•
•
Off
On
Source
Note
•
•
PIP is disabled if the primary screen does not receive a signal.
A TV tuner box (sold separately) must be connected to use the TV. (US Only)
Selects the input source for the PIP.
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
•
•
•
•
•
PC : DVI / AV / HDMI1 / HDMI2 / DisplayPort
DVI : PC
AV : PC
HDMI : PC
DisplayPort : PC
Size
Changes the Size of the PIP window.
Note
Size will be changed to 16:9 when PIP is On.
Position
Changes the Position of the PIP window.
Transparency
Adjusts the Transparency of PIP windows.
•
•
•
High
Medium
Low
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
•
Opaque
Edit Name
Name the input device connected to the input jacks to make your input source selection
easier.
VCR / DVD / Cable STB / HD STB / Satellite STB / AV Receiver / DVD Receiver /
Game /Camcorder / DVD Combo / DHR / PC / DVI Devices
Note
•
•
The displayed devices differ depending on the external input mode.
When connecting a PC to the HDMI terminal, set Edit Name to PC. In other cases, set
Edit Name to AV. However, since 640x480, 720P (1280x720), and 1080p (1920x1080)
are common signals for AV and PC, make sure to set the Edit Name in accordance with
the input signal.
•
The Picture menu changes depending on the input signal and Edit Name.
When using a DVI to HDMI cable connection (which does not support audio and video at
the same time), the audio port should be connected via a separate audio cable.
When a PC is connected, set Edit Name to DVI PC to enjoy the video and audio from the
connected PC.
When an AV device is connected, set Edit Name to DVI Device to enjoy the video and
audio from the connected AV device.
Source AutoSwitch Settings
Turning on the display with Source AutoSwitch On, and the previous video source selection
is not active, the display will automatically search the different video input sources for active
video.
Note
•
•
If the display TV source is active (TV tuner connected to the display) the Source AutoS-
witch search function becomes inactive. The display will remain in the TV source.
Source AutoSwitch selection and PIP function: If the Source AutoSwitch selection is
set to On, the PIP function will not work, the Source AutoSwitch selection must be set
to Off, for the PIP feature to work.
•
•
When the Source AutoSwitch selection is On, and or the Primary Source Recovery is
On, the display power saving mode becomes inactive.
When Primary Source Recovery is On, only the Primary Source and Secondary
Source selection are available and they are interchangeable and selectable at will.
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
Source AutoSwitch
When the Source AutoSwitch is On, the display video source will automatically be searched
for active video.
The Primary Source selection will be activated, if the current video source is not recognized.
Secondary source selection will become active, if no primary video source is available. If
the primary or secondary source is not recognized, the display will search again, if no active
video is found the display will show the no-input-signal message.
When the Primary Source selection is set to All, the display will search all the video source
inputs twice in sequence looking for an active video source, returning back to the first video
source in the sequence if no video is found.
1. Off
2. On
Primary Source Recovery
When Primary Source Recovery is On, only the Primary Source and Secondary
Source video source selection will be searched for active video.
The Primary Source will be selected if active video is found, if no video is found, the Sec-
ondary Source will be selected, if no video is found in Secondary Source again, the no-
input-signal is displayed.
1. Off
2. On
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
Primary Source
Specify Primary Source for the automatic input source.
Secondary Source
Specify Secondary Source for the automatic input source.
Picture [PC / DVI / DisplayPort / MagicInfo Mode]
Available Modes
•
•
•
•
•
•
PC / DVI / DisplayPort
AV
Component
HDMI
MagicInfo
TV
Note
•
•
A TV tuner box (sold separately) must be connected to use the TV. (US Only)
For an 400UX-3, 460UX-3 model, MagicInfo can only be enabled when a network box is
connected.
Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
Note
Not available when Dynamic Contrast is set to On.
1. Information
Recommended for communicating exact information (e.g. public information).
2. Advertisement
Recommended for displaying advertisements (e.g. videos or indoor or outdoor ads).
3. Custom
Custom
By using the on-screen menus, the contrast and brightness can be changed to your personal
preference.
Note
•
•
By adjusting the picture using the Custom function, MagicBright will change to Cus-
tom mode.
Not available when Dynamic Contrast is set to On.
1. Contrast
Adjusts the Contrast.
2. Brightness
Adjusts the Brightness.
3. Sharpness
Adjusts the Sharpness.
4. Gamma
Adjust the mid-range brightness (Gamma) for the picture.
Natural
•
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
•
•
•
Mode 1
Sets the picture brighter than <Natural>.
Mode 2
Sets the picture darker than <Mode 1>.
Mode 3
Increases the contrast between dark and bright colors.
Color Tone
Note
Not available when Dynamic Contrast is set to On.
The color tones can be changed.
1. Off
2. Cool
3. Normal
4. Warm
5. Custom
Note
•
•
If you set the Color Tone to Cool, Normal, Warm, or Custom, the Color Temp. function
is disabled.
If you set the Color Tone to Off, the Color Control function is disabled.
Color Control
Adjusts individual Red, Green, Blue color balance.
Note
Not available when Dynamic Contrast is set to On.
1. Red
2. Green
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
3. Blue
Color Temp.
Color Temp. is a measure of the 'warmth' of the image colors.
Note
•
•
Not available when Dynamic Contrast is set to On.
This function is only enabled if the Color Tone is set to Off.
Image Lock
Image Lock is used to fine-tune and get the best image by removing noise that creates
unstable images with jitters and shakiness. If satisfactory results are not obtained using the
Fine adjustment, use the Coarse adjustment and then use Fine again.
Note
Available in PC mode only.
Coarse
Fine
Removes noise such as vertical stripes. Coarse adjustment may move the screen image
area. You may relocate it to the center using the horizontal control menu.
Removes noise such as horizontal stripes. If the noise persists even after Fine tuning, repeat
it after adjusting the frequency (clock speed).
Position
Adjusts the screen location horizontally and vertically.
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
Auto Adjustment
The values of Fine, Coarse, Position are adjusted automatically. By changing the resolution
in the control panel, the auto function is performed.
Note
Available in PC mode only.
Signal Balance
This is used to make up for the weak RGB signal transmitted by a long signal cable.
Note
•
•
Not available when Dynamic Contrast is set to On.
Available in PC mode only.
Signal Balance
Selects either On or Off with the signal balance.
Signal Control
Note
Available when Signal Balance is set to On.
1. R-Gain
2. G-Gain
3. B-Gain
4. R-Offset
5. G-Offset
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
6. B-Offset
Size
The Size can be switched.
1. 16:9
2. 4:3
PIP Picture
Adjusts the PIP Screen Settings.
Note
Available Modes: PIP On
1. Contrast
Adjusts the Contrast of the PIP window on the screen.
2. Brightness
Adjusts the Brightness of the PIP window on the screen.
3. Sharpness
Adjusts the Sharpness of the PIP window on the screen.
4. Color
Adjusts the Color of the PIP window on the screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
Note
PIP input only operates in AV, HDMI, or Component mode.
5. Tint
Adds a natural tone to the PIP window.
Note
PIP input only operates in AV, HDMI, or Component mode.
Dynamic Contrast
Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to
create an optimum contrast.
1. Off
2. On
Note
Disabled when PIP is set to On.
Lamp Control
Adjusts the inverter lamp in order to reduce energy consumption.
Note
Not available when Dynamic Contrast is set to On.
Picture Reset
Reset the screen settings.
Picture [ AV / HDMI / Component / TV Mode]
Available Modes
•
PC / DVI / DisplayPort
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
•
•
•
•
•
AV
Component
HDMI
MagicInfo
TV
Note
•
•
A TV tuner box (sold separately) must be connected to use the TV. (US Only)
For an 400UX-3, 460UX-3 model, MagicInfo can only be enabled when a network box is
connected.
Mode
The LCD Display has four automatic picture settings ("Dynamic", "Standard", "Movie" and
"Custom") that are preset at the factory.
Dynamic, Standard, Movie, or Custom can be activated.
Note
Not available when Dynamic Contrast is set to On.
1. Dynamic
2. Standard
3. Movie
4. Custom
Custom
By using the on-screen menus, the contrast and brightness can be changed to your personal
preference.
Note
Not available when Dynamic Contrast is set to On.
Contrast
Adjusts the Contrast.
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
Brightness
Adjusts the Brightness.
Sharpness
Adjusts the picture Sharpness.
Color
Tint
Adjusts the picture Color.
Adds a natural tone to the display.
Note
Not available when Dynamic Contrast is set to On.
Color Tone
The color tones can be changed. The individual Color components are also user adjustable.
Note
Not available when Dynamic Contrast is set to On.
1. Off
2. Cool2
3. Cool1
4. Normal
5. Warm1
6. Warm2
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
Note
If you set the Color Tone to Cool2, Cool1, Normal, Warm1, or Warm2, the Color Temp.
function is disabled.
Color Temp.
Color temp. is a measure of the 'warmth' of the image colors.
Note
This function is enabled when Mode is set to Custom, and Dynamic Contrast and Color
Tone are Off.
Size
The Size can be switched.
PC mode (PC, HDMI [PC Timing]) : 16:9 - 4:3
Video mode (HDMI [Video Timing], AV or Component): 16:9 - Zoom1 - Zoom2 - 4:3 - Screen
Fit - Custom
1. 16:9 - Sets the picture to 16:9 wide mode.
2. Zoom 1 - Magnifies the size of the picture on the screen.
3. Zoom 2 - Magnifies the size of the picture more than Zoom 1.
4. 4:3 - Sets the picture to 4:3 normal mode.
5. Screen Fit - Displays the input scenes as they are without any cutoff when HDMI 720p,
1080i, 1080p signals are input.
6. Custom - Changes the resolution to suit the user's preferences.
Note
•
Certain external devices may feed the display an out of spec signal that may cause cutoff
even when using the Screen Fit feature.
•
•
Zoom 1, Zoom 2 are unavailable in HDMI mode.
The Position and Reset functions are available in Zoom 1 or Zoom 2 modes.
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
Digital NR (Digital Noise Reduction)
Turns the Digital Noise Reduction feature Off/On. The Digital Noise Reduction feature allows
you to enjoy clearer and crisper images.
1. Off
2. On
Note
Digital NR function is not available for all resolutions.
HDMI Black Level
When a DVD or set-top box is connected to your TV via HDMI, it may cause a degradation
in the screen quality, such as an increase in the black level, a low contrast, or discoloration,
etc., depending on the external device connected. In this case, adjust the screen quality of
your TV by configuring the HDMI Black Level.
1. Normal
2. Low
Note
For Timing which can be used for both the PC and the DTV in HDMI mode, HDMI Black
Level will be activated.
Film Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
Film Mode calibrates unnatural pictures that may occur in a movie (which is in 24 frames).
Moving subtitles may appear corrupted when this mode is enabled.
(In HDMI mode, this function is available when the input signal is interlaced scan; it is not
available in progressive scan.)
1. Off
2. On
PIP Picture
Adjusts the PIP Screen Settings.
Note
Available Modes: PIP On
1. Contrast
Adjusts the Contrast of the PIP window on the screen.
2. Brightness
Adjusts the Brightness of the PIP window on the screen.
3. Sharpness
Adjusts the Sharpness of the PIP window on the screen.
Dynamic Contrast
Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to
create an optimum contrast.
1. Off
2. On
Note
Disabled when PIP is set to On.
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
Lamp Control
Adjusts the inverter lamp in order to reduce energy consumption.
Note
Not available when Dynamic Contrast is set to On.
Picture Reset
Reset the screen settings.
Sound
Available Modes
•
•
•
•
•
•
PC / DVI / DisplayPort
AV
Component
HDMI
MagicInfo
TV
Note
•
•
A TV tuner box (sold separately) must be connected to use the TV. (US Only)
For an 400UX-3, 460UX-3 model, MagicInfo can only be enabled when a network box is
connected.
Mode
The LCD Display has a built-in high fidelity stereo amplifier.
1. Standard
Selects Standard for the standard factory settings.
2. Music
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
Selects Music when watching music videos or concerts.
3. Movie
Selects Movie when viewing movies.
4. Speech
Selects Speech when watching a show that is mostly dialog (i.e., news).
5. Custom
Selects Custom if you want to adjust the settings according to your personal preferen-
ces.
Custom
The sound settings can be adjusted to suit your personal preferences.
Note
•
•
You can hear the sound even when sound value is set to 0.
If you adjust sound using Custom function, Mode will turn to Custom mode.
Bass
Emphasizes low frequency audio.
Treble
Balance
Emphasizes high frequency audio.
Allows you to Adjusts the sound balance between the left and right speakers.
Auto Volume
Reduces the difference in volume control between broadcasters.
1. Off
2. On
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
SRS TS XT
SRS TS XT is a patented SRS technology that solves the problem of playing 5.1 multichannel
content over two speakers. TruSurround XT delivers a compelling, virtual surround sound
experience through any two-speaker playback system, including internal television speakers.
It is fully compatible with all multichannel formats.
1. Off
2. On
Sound Select
Enable the sound of either the primary or secondary display in PIP mode.
Note
Available when PIP is set to On.
1. Main
2. Sub
Speaker Select
When you use the product with it connecting to a Home theater, turn the Internal speakers
off so you can listen to sound from the Home theater's (external) speakers.
1. Internal
Sound is outputted both from the Internal speaker and the External speakers, but the
volume control is only available from the Internal speaker.
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
2. External
Sound is only output from the external speakers, and the volume can only be controlled
for them as well.
Sound Reset
Reset the sound settings.
Setup
Available Modes
•
•
•
•
•
•
PC / DVI / DisplayPort
AV
Component
HDMI
MagicInfo
TV
Note
•
•
A TV tuner box (sold separately) must be connected to use the TV. (US Only)
For an 400UX-3, 460UX-3 model, MagicInfo can only be enabled when a network box is
connected.
Language
You can choose one of 13 languages.
Note
The language chosen affects only the language of the OSD. It has no effect on any software
running on the computer.
Time
Clock Set, Sleep Timer, Timer1 / Timer2 / Timer3, and Holiday Management can be set.
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
Clock Set
Current Time Setting.
Sleep Timer
Turns the LCD Display off automatically at certain times.
1. Off
2. 30
3. 60
4. 90
5. 120
6. 150
7. 180
Timer1 / Timer2 / Timer3
You can set the LCD display to automatically turn on or off at a specified time.
Note
•
•
Hoilday : select Apply to disable the timer on holidays and Don't apply to enable the
timer on holidays.
Only enabled when the clock is set using the Clock Set menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
•
The Manual option allows you to select a day of the week.
Holiday Management
•
Add
You can register holidays.
•
Delete Selected
You can delete selected holidays.
Note
•
•
Only enabled when registered holidays are selected.
More than one holiday can be selected and deleted.
•
Delete All
You can delete all the registered holidays.
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
Menu Transparency
Change the transparency of the background of the OSD.
1. High
2. Medium
3. Low
4. Opaque
Safety Lock
Change PIN
The password can be changed.
The preset password for the LCD Display is "0000".
Note
If you forgot your password, press the remote buttons INFO → EXIT → MUTE to reset the
password to "0000."
Lock On
This is the function that locks the OSD in order to keep the current settings or to prevent
others from adjusting the settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
Energy Saving
This feature adjusts the power consumption of the unit in order to save energy.
1. Off
2. On
Video Wall
A Video Wall is a set of video screens connected together, so that each screen shows a part
of the whole picture or where the same picture is repeated on each screen.
When the Video Wall is on, you can adjust the Video Wall screen setting.
Note
•
When a Horizontal or Vertical split is over four, use a resolution of XGA (1024 x 768) or
greater to prevent any picture degradation.
•
•
Size will be disabled when Video Wall is running.
Disabled when PIP is set to On.
Video Wall
Turns Off/On the Video Wall function of the selected display Off/On.
•
•
Off
On
Format
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
The Format can be selected to see a divided screen.
•
Full
Provides a full screen without any margins.
Natural
•
Displays a natural image with the original aspect ratio intact.
Horizontal
Sets how many parts the screen should be divided horizontally.
Fifteen adjustment levels: 1~15.
Note
If Vertical is set to 15, the maximum value for Horizontal is 6.
Vertical
Sets how many parts the screen should be divided vertically.
Fifteen adjustment levels: 1~15.
Note
If Horizontal is set to 15, the maximum value for Vertical is 6.
Screen Position
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
The screen can be divided into several images. A number of screens can be selected with a
different layout when dividing.
•
•
•
•
Select a mode in Screen Position.
Select a display in Display Selection.
The selection will be set up by pressing a number in the selected mode.
The screen can be split into a maximum of 100 sub-screens.
Note
When more than four displays are connected, we recommend a resolution of XGA (1024*768)
or greater to prevent any picture degradation.
Safety Screen
The Safety Screen function is used to prevent afterimages that may appear when a still
picture is displayed on the screen over a long time.
Note
This function is not available when the power is turned off.
Pixel Shift
Pixel Shift
To prevent after-images on the screen, you can use this function to have pixels move on the
LCD in the horizontal or vertical direction.
•
•
Off
On
Horizontal
Sets how many pixels the screen moves horizontally.
Five adjustment levels: 0, 1, 2, 3, and 4.
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
Vertical
Sets how many pixels the screen moves vertically.
Five adjustment levels: 0, 1, 2, 3, and 4.
Time
Set the time interval for performing the horizontal or vertical movement, respectively.
Timer
Timer
You can set the timer for Screen Burn Protection.
If you start the operation to erase any residual image, the operation will be performed for the
set period of time and then automatically finish.
•
•
Off
On
Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
You can change the Safety Screen Type.
•
•
•
Bar
Eraser
Pixel
Period
Use this function to set the execution period for each mode set in the timer.
Time
Within the set period of time specify a time for execution.
Mode - Bar, Eraser, Pixel : 10~50 sec
•
Bar
This function prevents after-images on the screen by moving long black and white vertical
lines.
Eraser
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
This function prevents after-images on the screen by moving a rectangular pattern.
Pixel
This function prevents after-images by moving many pixels on the screen.
Side Gray
Select the brightness of the grey for the screen background.
•
•
•
OFF
Light
Dark
Resolution Select
When the picture is not displayed properly on the screen when setting the graphics card
resolution of the computer to 1024 x 768 @ 60Hz, 1280 x 768 @ 60Hz, 1360 x 768@ 60Hz
or 1366 x 768 @ 60Hz, by using this function(Resolution Select), you can have the picture
displayed on the screen in the specified resolution.
Note
Available in PC mode only.
1. Off
2. 1024 X 768
3. 1280 X 768
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
4. 1360 x 768
5. 1366 X 768
Note
Selecting the menu is only allowed when the graphics resolution is set to 1024 x 768 @ 60Hz,
1280 x 768 @ 60Hz, 1360 x 768 @ 60Hz or 1366 x 768 @ 60Hz.
Power On Adjustment
Adjusts the Power On time for the screen.
Caution: Set the Power On time to be longer to avoid overvoltage.
OSD Rotation
OSD Rotate
1. Landscape
2. Portrait
Advanced Settings
Configures the settings more elaborately.
Temperature
Protects the product by detecting the internal temperature.
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
Temperature Control
Detects the product's internal temperature and specifies the desired temperature.
The product is set to 77°C by default.
Note
•
•
The picture will be dimmed if the temperature exceeds the specified temperature, and the
product will automatically power off to prevent overheating if the temperature keeps rising.
It is best to use the product at temperatures 75 - 80°C (based on ambient temperature of
40°C).
Refer to "Specifications" herein for details about operating conditions.
Current Temperature
Shows the current temperature of the product.
Auto Power
Enables or disables Auto Power for the product.
•
•
Off
On
Note
When Auto Power is On, the product will power on automatically as soon as it is connected
to power.
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
Button Lock
Locks or unlocks the monitor control buttons on the product.
•
•
Off
On
User Auto Color
1. Auto Color
Automatically adjusts the colors.
2. Reset
Resets the color settings.
Note
Enabled only in PC mode.
Standby Control
Sets the standby mode, which will be activated when no input signal is detected.
•
Off
A message will read <No Signal> if no input signal is detected.
•
On
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
Power-saving mode will be activated if no input signal is detected.
Auto
•
When no input signal is detected,
- Power-saving mode will be activated if an external device is connected.
- A message will read <No Signal> if no external device is connected.
Note
•
•
Enabled only in PC, DVI, HDMI, or DP(DisplayPort) mode.
Auto will be disabled in HDMI mode.
Lamp Schedule
Adjusts the luminance to a user-specified value at a specified time.
OSD Display
Displays or hides a menu item on the screen.
Source OSD
•
•
Off
On
Not Optimum Mode OSD
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
•
•
Off
On
No Signal OSD
•
•
Off
On
MDC OSD
•
•
Off
On
Software Upgrade
Performs a software upgrade.
1. Connect the product to a computer via a digital signal such as DVI or HDMI. Click the
BMP image file converted from an SW code. The image below will appear on the screen
of the product.
2. While a BMP image onto which the software code has been converted is displayed on
the screen, select Software Upgrade.
Note
When there are two or more BMP images, they are displayed on the screen using a
slideshow.
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
•
•
It is recommended that the playback interval between two BMP images in the slide-
show should be one second. The image extraction probability will decrease with other
playback intervals.
A BMP image might not be extracted if it is covered by another image (for example,
the mouse pointer).
3. If a more recent version than the current software version is detected, you will be asked
whether to upgrade the current software. If you select <Yes>, the upgrade is performed.
4. When the software upgrade is completed, the product is turned off and on automatically.
Note
•
•
•
This only operates with a digital signal, such as in DVI, HDMI1, or HDMI2 mode. (The
input resolution must be identical to the panel resolution.)
In HDMI1 and HDMI2 modes, the timing values used for both the PC and TV are only
supported if the Edit Name is set to PC or DVI PC.
This is only supported if the Size is set to 16:9.
Setup Reset
Reset all the values for a setting.
Reset All
Reset all the settings for the display.
Multi Control
Available Modes
•
•
•
•
PC / DVI / DisplayPort
AV
Component
HDMI
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
•
•
MagicInfo
TV
Note
•
•
A TV tuner box (sold separately) must be connected to use the TV. (US Only)
For an 400UX-3, 460UX-3 model, MagicInfo can only be enabled when a network box is
connected.
Multi Control
Assigns an individual ID to the SET.
•
•
ID Setup
Assigns distinctive IDs to the SET.
ID Input
Use to select the transmitter functions of the individual SET. Only a SET where the ID
corresponds to the transmitter setting becomes activated.
•
•
MDC Connection
Selects a port to receive the MDC inputs from.
•
•
Communicates with the MDC via a RS232C MDC cable.
Communicates with the MDC via an RJ45 MDC cable.
Network Setting
•
•
•
•
IP Setting : Manual, Auto
IP Address : Manually enter the IP Address if IP Setting is set to Manual.
Subnet Mask : Manually enter the Subnet Mask if IP Setting is set to Manual.
Gateway : Manually enter the Gateway if IP Setting is set to Manual.
MagicInfo
Available Modes
•
•
PC / DVI / DisplayPort
AV
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
•
•
•
Component
HDMI
MagicInfo
For an 400UX-3, 460UX-3 model,
MagicInfo can only be enabled when a network box is connected.
Note
•
•
•
•
The remote control can be used to select MagicInfo. However, it is recommended to use
a separate USB keyboard to utilize MagicInfo fully.
For MagicInfo in Device mode, moving external devices while booting may cause errors.
Set up external devices only if the LCD Display turns on.
Do not unplug the LAN cable used for the network (ex: video display). Otherwise, the
program (MagicInfo) may stop. If you do unplug the cable, restart the system.
Do not unplug the LAN cable used by an USB device (ex: video display). Otherwise, the
program (MagicInfo) may stop.
•
•
•
To access other sources, press the SOURCE button in MagicInfo.
The preset password for the LCD Display is "000000".
The server program's Power-On option works only if the LCD Display's power is com-
pletely shut off.
Please make sure not to use the Power-On option when the LCD Display is in the process
of shutting down since this may cause system errors on the LCD Display.
•
•
When using MagicInfo with the MagicInfo Server Program: perform Network mode.
When using MagicInfo with the device directly connected to LCD Display : execute Device
mode.
•
•
•
Press ESC to directly go to the MagicInfo Window screen.
To setup MagicInfo on a Windows screen, a keyboard and mouse are required.
To setup MagicInfo on a Windows screen, refer to the MagicInfo Server Help.
It is highly recommended not to turn off the AC power during an operation.
For pivoted LCD Displays, ticker transparency is not supported.
•
•
For pivoted LCD Displays, a screen resolution of up to 720*480(SD) is supported for
movies.
•
•
For drive D:, EWF is not applied.
To save Setup contents that have been changed when EWF is in the Enable state, you
must Commit them.
•
By selecting Disable, Enable or Commit, the system is restarted.
MagicInfo
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
1. Select Application - step 1
You can select an Application to be executed in your computer when Windows starts.
2. Select TCP/IP - step 2
In step 2 of MagicInfo Setup Wizard, you don’t have to go to Network Setting on the desktop
to make your settings for TCP/IP. You just do that at step 2 of MagicInfo installation.
3. Select Language - step 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
When using multiple languages, you can choose and set a specific language among them.
Note
English is set as the default language.
You do not need to select a language if you will be using English as the menu display language.
4. Select Screen Type - step 4
You can select which rotation type will be applied to your device.
5. Setup Information
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the LCD Display
Shows the settings that have been selected by the user.
Note
If the MagicInfo icon is not displayed on the notification area, double click the MagicInfo
icon on the window desktop. The icon will appear.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Self-Test Feature Check
Note
problems that you cannot solve by yourself.
Self-Test Feature Check
1. Turn off both your computer and the LCD Display.
2. Unplug the video cable from the back of the computer.
3. Turn on the LCD Display.
The figure shown below ("No Signal") appears on a black background when the LCD
Display is working normally even though no video signal is detected: While in the Self-
Test mode, the LED power indicator remains green and the figure moves around on the
screen.
4. Turn off your LCD Display and reconnect the video cable; then turn on both your com-
puter and the LCD Display
If your LCD Display screen remains blank after using the previous procedure, check your
video controller and computer system; your LCD Display is functioning properly.
Warning Messages
You can even view the screen at a resolution of 1920 x 1080. However, you will receive the
following message for a minute; You can choose to change the screen resolution or stay in
the current mode during that time. If the resolution is more than 85Hz, you will see the black
screen because the LCD Display does not support over 85Hz.
Note
by the LCD Display.
Maintenance and Cleaning
1) Maintaining the LCD Display Case.
Clean with a soft cloth after disconnecting the power cord.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
•
Do not use benzene, thinner or other flammable sub-
stances.
2) Maintaining the Flat Panel Display Screen.
Clean with a soft cloth (cotton flannel).
•
Never use acetone, benzene or thinner.
(They may cause flaws or deformation of the screen
surface.)
•
The user is responsible for any damage caused by
using these substances.
Symptoms and Recommended Actions
Note
A LCD Display recreates visual signals received from the computer. Therefore, if there is a
problem with the computer or the video card, this can cause the LCD Display to become
blank, have poor coloring, become noisy, etc. In this case, first check the source of the prob-
lem, and then contact a Service Center or your dealer.
1. Check if the power cord and the video cables are properly connected to the computer.
2. Check if the computer beeps more than 3 times when booting.
(If it does, request service.)
3. If you installed a new video card or if you assembled the PC, check if you installed the
Adaptor(video).
4. Check if the scanning ratio of the video screen is set to between 56 Hz ~ 85 Hz.
(Do not exceed 60Hz when using the maximum resolution.)
5. If you have problems in installing the Adaptor (video) driver, boot the computer in Safe
Mode, remove the Display Adaptor in the "Control Panel -> System -> Device Adminis-
trator" and then reboot the computer to reinstall the Adaptor (video) driver.
Check List
Note
The following table lists possible problems and their solutions. Before calling for assistance,
check the information in this section to see if you can remedy any problems for yourself. If
Problems related to the Installation (PC Mode)
Note
Problems related to the LCD Display installation and their solutions are listed.
Q: The LCD Display screen flickers.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
A:
Check if the signal cable between the computer and the LCD Display is securely con-
nected.
Problems related to the Screen
Note
Problems related to the LCD Display screen and their solutions are listed.
Q: The screen is blank and the power indicator is off.
A:
Ensure that the power cord is firmly connected and the LCD Display is on.
Q: "No Signal" message.
A:
Ensure that the signal cable is firmly connected to the PC or video sources.
A:
Ensure that the PC or video sources are turned on.
Q: "Not Optimum Mode" message.
A:
A:
Check the maximum resolution and the frequency of the video Adaptor.
Compare these values with the data in the Preset Timing Modes Chart.
Q: The picture rolls vertically.
A:
Check if the signal cable is securely connected. Re-connect it, if necessary.
Q: The image is not clear; picture is blurred.
A:
A:
A:
Turn on again after removing all accessories (video extension cable, etc.)
Set the resolution and frequency to the recommended ranges.
Q: The picture image is unstable and shakes.
A:
Check if the resolution and frequency set for the computer video card falls in the range
supported by the LCD Display. If not, reset them referring to the current Information
under the LCD Display menu and Preset Timing Modes.
Q: Ghost images are shown in the picture.
A:
Check if the resolution and frequency set for the computer video card falls in the range
supported by the LCD Display. If not, reset them referring to the current Information
under the LCD Display menu and Preset Timing Modes.
Q: The image is too light or too dark.
A:
Adjust the brightness and contrast.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Q: The screen color is inconsistent.
Q: The color image is distorted by dark shadows.
Q: The color white is poor.
Q: The Power Indicator blinks.
A:
The LCD Display is currently saving the changes made in the settings to the OSD
memory.
Q: The screen is blank and the power indicator light blinks every 0.5 or 1 seconds.
A:
The LCD Display is using its power management system. Press any key on the key-
board.
Problems related to Audio
Note
Problems related to audio signals and their solutions are listed below.
Q: No sound.
A:
Ensure that the audio cable is firmly connected to both the audio-in port on your LCD
Display and the audio-out port on your sound card.
Check the volume level.
A:
Q: The sound level is too low.
A:
A:
Check the volume level.
If the volume is still too low after turning the control to its maximum, check the volume
control on the computer sound card or software program.
Q: The sound is too high or too low.
Problems related to the Remote Control
Note
Problems related to the remote control and their solutions are listed.
Q: The remote control buttons do not respond.
A:
A:
A:
A:
Check the polarities (+/-) of the batteries.
Check if the batteries are empty.
Check if the power is on.
Check if the power cord is securely connected.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
A:
Check if a special fluorescent or neon lamp is on in the vicinity.
Q & A
Q: How can I change the frequency?
A:
The frequency can be changed by reconfiguring the video card.
Note
That video card support can vary, depending on the version of the driver used. (Refer
to the computer or the video card manual for details.)
A:
Windows XP:
Control Panel → Appearance and Themes → Display → Settings.
Windows ME/2000:
A:
Control Panel → Display → Settings.
* Contact the video card manufacturer for details.
Q: How can I set the Power Saving function?
A:
Windows XP:
Control Panel → Appearance and Themes → Display → Enable the powersaving fea-
ture in Screen Saver.
Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer
Manual).
A:
Windows ME/2000:
Control Panel → Display → Screen Saver.
Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer
Manual).
Q: How can I clean the outer case/LCD Panel?
A:
Disconnect the power cord and then clean the LCD Display with a soft cloth, using either
a cleaning solution or plain water.
Do not leave any detergent or scratches on the case. Do not let any water enter the
LCD Display.
Q: How can I play the video?
A:
The video supports the MPEG1 and WMV codecs only. Install the corresponding codec
to play the video. Note that some of the codecs can be incompatible.
Note
Before calling for assistance, check the information in this section to see if you can remedy
any problems yourself. If you do need assistance, please call the phone number on the In-
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
General
General
Model Name
SyncMaster 400UXN-3, 400UX-3 / 460UXN-3, 460UX-3
LCD Panel
Size
400UXN-3, 400UX-3
460UXN-3, 460UX-3
400UXN-3, 400UX-3
40 inch (101 cm)
46 inch (116 cm)
Display area
885.6 mm (H) x 498.15 mm
(V)
460UXN-3, 460UX-3
1018.08 mm (H) x 572.67 mm
(V)
Synchronization
Horizontal
30~81 kHz
56~85 Hz
Vertical
Display Color
16.7 (true)
Resolution
Optimum resolution 1920 x 1080 @ 60 Hz
Maximum resolution 1920 x 1080 @ 60 Hz
Maximum Pixel Clock
148.5 MHz (Analog,Digital)
Power Supply
This product supports 100 - 240 V.
Since the standard voltage may differ from country to country, please check the
label on the back of the product.
Signal connectors
D-sub(Component), DVI-D In/Out, AV, HDMI 1/2, RS232C In/Out, DP, DC Out,
Stereo Audio In/Out, Audio In(L/R), RJ45, IR In/Out,Mini USB
Network : USB, LAN, D-sub out (Only Network model)
Dimensions (WxHxD)
With Stand
Without Stand
With Stand
400UXN-3
913.7 X 590.4 X 311.0 mm
400UX-3
36 X 23.2 X 12.2 inches
400UXN-3
913.7 X 526.2 X 118.0 mm
400UX-3
36 X 20.7 X 4.6 inches
460UXN-3
1049.4 X 666.8 X 311.0 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Dimensions (WxHxD)
460UX-3
41.3 X 26.3 X 12.2 inches
1049.4 X 602.6 X 118.0 mm
Without Stand
460UXN-3
460UX-3
41.3 X 23.7 X 4.6 inches
Weight
400UXN-3
400UX-3
460UXN-3
460UX-3
19.0 Kg / 41.9 lbs
17.5 Kg / 38.6 lbs
26.0 kg / 57.3 lbs
24.5 kg / 54.0 lbs
VESA Mounting Interface
600.0 mm X 400.0 mm
Environmental considerations
Operating
400UXN-3
460UXN-3
Operating Temperature : 50 °F ~
104 °F (10 °C ~ 40 °C)
(With Network Box)
Humidity : 10 % ~ 80 %, non-con-
densing
Operating
400UX-3
Temperature : 32 °F ~ 104 °F (0 °C
~ 40 °C)
(Without
Box)
Network 460UX-3
Humidity : 10 % ~ 80 %, non-con-
densing
Storage
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)
Humidity : 5 % ~ 95 %, non-condensing
Plug and Play Capability
This LCD Display can be installed on any Plug & Play compatible system. The
interaction of the LCD Display and the computer systems will provide the best op-
erating conditions and LCD Display settings. In most cases, the LCD Display
installation will proceed automatically, unless the user wishes to select alternate
settings.
Dot Acceptable
TFT-LCD panels manufactured by using advanced semiconductor technology with
precision of 1ppm (one millionth) above are used for this product. But the pixels of
RED, GREEN, BLUE and WHITE color appear to be bright sometimes or some
black pixels may be seen. This is not from bad quality and you can use it without
any problems.
For example, the number of TFT-LCD sub pixels contained in this product are
6,220,800.
Note
Design and specifications are subject to change without prior notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Class A (Information Communication equipment for industrial use) : 400UXN-3,
460UXN-3
Attention dealers and users. This device is registered for EMC requirements for industrial use
(Class A) and can be used in areas other than general households.
Class B(Information Communication equipment for residential use) : 400UX-3,
460UX-3
This device is registered for EMC requirements for home use (Class B). It can be used in all
areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)
(USA Only)
Dispose unwanted electronics through an approved recycler. To
find the nearest recycling location, go to our website, www.sam-
sung.com/recyclingdirect or call, (877) 278 - 0799
PowerSaver
This LCD Display has a built-in power management system called PowerSaver. This system
saves energy by switching your LCD Display to low-power mode when it has not been used
for a certain amount of time. The LCD Display automatically returns to normal operation when
you press a key on the keyboard. For energy conservation, turn your LCD Display OFF when
it is not needed, or when leaving it unattended for long periods. The PowerSaver system
operates with a VESA DPM compliant video card installed in your computer. Use the software
utility installed on your computer to set up this feature.
PowerSaver
State
Normal Op- Power sav- Power off
Power off
eration
ing mode
(Power
Swich)
Power Indicator
On
Blinking
5 Watts
Amber
Off
400UXN-3
250 Watts
5 Watts
0 Watts
(852.5 BTU/ (17.05 BTU/ (17.05 BTU/ (0 BTU/h)
h)
h)
h)
400UX-3
200 Watts
2 Watts
1 Watts
0 Watts
Power Con-
sumption
(682 BTU/h) (6.82 BTU/h) (3.41 BTU/h) (0 BTU/h)
300 Watts 5 Watts 5 Watts 0 Watts
460UXN-3
(Typical)
(1023 BTU/ (17.05 BTU/ (17.05 BTU/ (0 BTU/h)
h)
h)
h)
460UX-3
230 Watts
2 Watts
1 Watts
0 Watts
(784.3 BTU/ (6.82 BTU/h) (3.41 BTU/h) (0 BTU/h)
h)
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Note
•
•
The actual power consumption may be different from the indicated power consumption
above if the system conditions or settings are changed.
To stop any power consumption, turn off the switch or disconnect the power cable on the
back. Be sure to disconnect the power if you intend to stay away from home for many
hours.
•
If you connect a network box (sold separately), the LFD will no longer be in compliance
with Energy Star 5.0.
Preset Timing Modes
If the signal transferred from the computer is the same as the following Preset Timing Modes,
the screen will be adjusted automatically. However, if the signal differs, the screen may go
blank while the power LED is on. Refer to the video card manual and adjusts the screen as
follows.
Display Mode
Horizontal Vertical Fre- Pixel Clock Sync Polarity
Frequency quency (Hz)
(kHz)
(MHz)
(H/V)
IBM, 640 x 350
IBM, 640 x 480
31.469
31.469
31.469
35.000
49.726
68.681
37.861
37.500
35.156
37.879
48.077
46.875
31.020
48.363
56.476
60.023
67.500
47.776
60.000
63.981
79.976
47.712
47.712
66.587
67.500
70.086
59.940
70.087
66.667
74.551
75.062
72.809
75.000
56.250
60.317
72.188
75.000
60.000
60.004
70.069
75.029
75.000
59.870
60.000
60.020
75.025
60.015
59.790
59.934
60.000
25.175
25.175
28.322
30.240
57.284
100.000
31.500
31.500
36.000
40.000
50.000
49.500
33.750
65.000
75.000
78.750
108.000
79.500
108.000
108.000
135.000
85.500
85.500
138.500
148.500
+/-
-/-
IBM, 720 x 400
-/+
-/-
MAC, 640 x 480
MAC, 832 x 624
MAC, 1152 x 870
VESA, 640 x 480
VESA, 640 x 480
VESA, 800 x 600
VESA, 800 x 600
VESA, 800 x 600
VESA, 800 x 600
VESA, 848 x 480
VESA, 1024 x 768
VESA, 1024 x 768
VESA, 1024 x 768
VESA, 1152 x 864
VESA, 1280 x 768
VESA, 1280 x 960
VESA, 1280 x 1024
VESA, 1280 x 1024
VESA, 1360 x 768
VESA, 1366 x 768
VESA,1920 x 1080
VESA,1920 x 1080
-/-
-/-
-/-
-/-
+/+
+/+
+/+
+/+
+/+
-/-
-/-
+/+
+/+
-/+
+/+
+/+
+/+
+/+
+/+
+/-
+/+
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Horizontal Frequency
The time to scan one line connecting the right edge
to the left edge of the screen horizontally is called the
Horizontal Cycle and the inverse number of the Hor-
izontal Cycle is called the Horizontal Frequency.
Unit: kHz
Vertical Frequency
Like a fluorescent lamp, the screen has to repeat the
same image many times per second to display an
image to the user. The frequency of this repetition is
called the Vertical Frequency or Refresh Rate. Unit:
Hz
Download from Www.Somanuals.com. All Manuals Search And Download.
Information
For a Better Display
Adjust the computer resolution and screen injection rate (refresh rate) on the
computer as described below to enjoy the best picture quality. You can have an
uneven picture quality on screen if the best picture quality is not provided for TFT-
LCD.
•
•
Resolution: 1920 x 1080
Vertical frequency (refresh rate): 60 Hz
TFT-LCD panels manufactured by using advanced semiconductor technology
with a precision of 1ppm (one millionth) and above is used for this product. But the
pixels of RED, GREEN, BLUE and WHITE color seem to be bright sometimes or
some of black pixels could be seen. This is not from bad quality and you can use
it without any problems.
•
For example, the number of TFT-LCD sub pixels contained in this product are
6,220,800.
When cleaning the monitor and the panel outside, please apply a small amount
of water to a soft cloth. Rub softly when cleaning the LCD area.If excessive force
is applied, you may stain it.
If you are not satisfied with the picture quality, you can get better quality of
picture by performing the "Auto Adjustment function" in display screen that is
appeared as window termination button is pressed. If there's still noise after the
automatic adjustment, use the Fine/Coarse adjustment function.
When viewing a fixed screen for an extended period of time, a residual image
or blurriness may appear. Change the mode to energy save or set a screensaver
to move the picture when you need to be away from the monitor for an extended
period of time.
PRODUCT INFORMATION (Image Retention Free)
What is Image Retention ?
Image retention may not occur when a LCD panel is operated under normal con-
ditions.
Normal conditions are defined as continuously changing video patterns. When the
LCD panel is operated for a long time with a fixed pattern (over 12 hours), there
may be slight difference in voltage between electrodes that work the liquid crystal
(LC) in a pixel. The voltage difference between electrodes increases with time,
forcing the liquid crystal to lean. When this occurs, the previous image may be seen
when the pattern is changed. To prevent this, the accumulated voltage difference
must be decreased.
Download from Www.Somanuals.com. All Manuals Search And Download.
Information
Power Off, Screen Saver, or Power Save Mode
•
•
•
Turn the power off for 2 hours after 12 hours in use
Set the Monitor to power off with the PC Display Properties Power Scheme.
Use a Screen saver if possible - Screen saver in one color or a moving image
is recommended.
•
The Image Retention Free function applied to the product is recommended.
Change the Color Information periodically
Note
Use Two different colors
Rotate the Color Information with 2 different colors every 30 minutes.
•
Avoid using a combination of characters and background color with large dif-
ference in luminance.
Avoid using Grey colors, which can cause Image retention easily.
Avoid: Colors with big difference in luminance (Black & White, Grey)
Download from Www.Somanuals.com. All Manuals Search And Download.
Information
Change the characters color periodically
•
Use Bright colors with little difference in luminance.
- Cycle : Change the characters color and background color every 30 minutes
•
Every 30 minutes, change the characters with movement.
•
•
Have the images and logo cycle periodically.
- Cycle: Display moving image together with Logo for 60 seconds after 4 hours
in use.
The best way to protect your monitor from Image retention is to turn the Power
off, or set your PC or System to operate a Screen Saver program when you are
not using it. If these guidelines are not followed, it may affect your warranty.
Apply the Screen Pixel function on Product
Apply the Screen Pixel function
•
- Symptom: Dot with Black Color move up and down.
•
Apply the Screen Bar function
- Symptom: Horizontal / Vertical Bar with Black Color move up and down.
Apply the Screen Erasing function on Product
Download from Www.Somanuals.com. All Manuals Search And Download.
Information
•
Apply the Screen Erasing function
- Symptom: 2 Vertical blocks move while erasing the display
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Contact SAMSUNG WORLDWIDE
Note
If you have any questions or comments relating to Samsung products, please contact the
SAMSUNG customer care center.
North America
U.S.A
CANADA
ca_fr (French)
MEXICO
01-800-SAMSUNG
(726-7864)
http://www.samsung.com
Latin America
ARGENTINA
BRAZIL
0800-333-3733
0800-124-421
http://www.samsung.com
http://www.samsung.com
4004-0000
BOLIVIA
CHILE
800-10-7260
From mobile 02-482 82 00
COLOMBIA
COSTA RICA
DOMINICA
ECUADOR
EL SALVADOR
GUATEMALA
HONDURAS
JAMAICA
01-8000112112
0-800-507-7267
1-800-751-2676
1-800-10-7267
800-6225
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
1-800-299-0013
800-27919267
1-800-234-7267
00-1800-5077267
800-7267
NICARAGUA
PANAMA
PERU
0-800-777-08
1-800-682-3180
PUERTO RICO
TRINIDAD & TO- 1-800-SAMSUNG (726-7864) http://www.samsung.com
BAGO
VENEZUELA
0-800-100-5303
42 27 5755
http://www.samsung.com
Europe
ALBANIA
AUSTRIA
0810 - SAMSUNG (7267864, http://www.samsung.com
€ 0.07/min)
BELGIUM
02-201-24-18
http://www.samsung.com/be
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Europe
be_fr (French)
BOSNIA
05 133 1999
07001 33 11
http://www.samsung.com
BULGARIA
CROATIA
062 SAMSUNG (062 726 http://www.samsung.com
7864)
CZECH
800
-
SAMSUNG http://www.samsung.com
(800-726786)
DENMARK
FINLAND
FRANCE
70 70 19 70
030 - 6227 515
01 48 63 00 00
http://www.samsung.com
GERMANY
01805
-
SAMSUNG http://www.samsung.com
(726-7864, € 0,14/Min)
CYPRUS
GREECE
From landline : 8009 4000
http://www.samsung.com
From landline : 80111-SAM- http://www.samsung.com
SUNG (7267864)
From landline & mobile : (+30)
210 6897691
HUNGARY
06-80-SAMSUNG (726-7864) http://www.samsung.com
ITALIA
KOSOVO
+381 0113216899
261 03 710
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
LUXEMBURG
MACEDONIA
MONTENEGRO
NETHERLANDS
023 207 777
020 405 888
0900-SAMSUNG
(0900-7267864) ( € 0,10/Min)
NORWAY
POLAND
815-56 480
0 801-1SAMSUNG(172-678) http://www.samsung.com
+48 22 607-93-33
PORTUGAL
RUMANIA
808 20-SAMSUNG (808 20 http://www.samsung.com
7267)
SUNG (7267864)
From landline & mobile : (+40)
21 206 01 10
SERBIA
SLOVAKIA
SPAIN
0700 SAMSUNG (0700 726 http://www.samsung.com
7864)
0800 - SAMSUNG (0800-726 http://www.samsung.com
786)
902 - 1 - SAMSUNG (902 172 http://www.samsung.com
678)
SWEDEN
0771 726 7864 (SAMSUNG) http://www.samsung.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Europe
SWITZERLAND
0848 - SAMSUNG (7267864, http://www.samsung.com/ch
CHF 0.08/min)
http://www.samsung.com/
U.K
0330 SAMSUNG (7267864) http://www.samsung.com
EIRE
0818 717100
8-800-77777
8000-7267
800-7267
http://www.samsung.com
LITHUANIA
LATVIA
ESTONIA
TURKEY
444 77 11
CIS
RUSSIA
8-800-555-55-55
8-800-555-555
0-800-05-555
http://www.samsung.com
http://www.samsung.com
GEORGIA
ARMENIA
AZERBAIJAN
KAZAKHSTAN
088-55-55-555
7799)
UZBEKISTAN
KYRGYZSTAN
TADJIKISTAN
MONGOLIA
UKRAINE
8-10-800-500-55-500
00-800-500-55-500
8-10-800-500-55-500
-
http://www.samsung.com
http://www.samsung.com
0-800-502-000
ua_ru
BELARUS
MOLDOVA
810-800-500-55-500
00-800-500-55-500
http://www.samsung.com
http://www.samsung.com
Asia Pacific
1300 362 603
AUSTRALIA
http://www.samsung.com
NEW ZEALAND
0800 SAMSUNG (0800 726 http://www.samsung.com
786)
CHINA
400-810-5858
HONG KONG
(852) 3698 - 4698
http://www.samsung.com/
hk_en/
INDIA
1800 1100 11
3030 8282
http://www.samsung.com
1800 3000 8282
1800 266 8282
0800-112-8888
INDONESIA
021-5699-7777
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Asia Pacific
JAPAN
0120-327-527
http://www.samsung.com
http://www.samsung.com
MALAYSIA
PHILIPPINES
1800-88-9999
1-800-10-SAMSUNG
(726-7864) for PLDT
1-800-3-SAMSUNG
(726-7864) for Digitel
1-800-8-SAMSUNG
(726-7864) for Globe
02-5805777
SINGAPORE
THAILAND
1800-29-3232
http://www.samsung.com
http://www.samsung.com
02-689-3232
0800-329-999
TAIWAN
0266-026-066
1 800 588 889
VIETNAM
Middle East
IRAN
021-8255
http://www.samsung.com
OMAN
800-SAMSUNG (726-7864) http://www.samsung.com
KUWAIT
BAHRAIN
EGYPT
183-2255
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
8000-4726
08000-726786
800-22273
JORDAN
MOROCCO
SAUDI ARABIA
U.A.E
080 100 2255
9200-21230
800-SAMSUNG (726-7864) http://www.samsung.com
Africa
CAMEROON
7095- 0077
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
COTE D'LVOIRE 8000 0077
GHANA
0800-10077
0302-200077
0800 724 000
0800-726-7864
800-00-0077
KENYA
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
NIGERIA
SENEGAL
SOUTH AFRICA
TANZANIA
UGANDA
0860-SAMSUNG (726-7864) http://www.samsung.com
0685 88 99 00
0800 300 300
http://www.samsung.com
http://www.samsung.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Terms
Dot Pitch
The image on a monitor is composed of red, green and blue
dots. The closer the dots, the higher the resolution. The dis-
tance between two dots of the same color is called the 'Dot
Pitch'. Unit: mm
Vertical Frequency
The screen must be redrawn several times per second in
Horizontal Frequency
left edge of the screen horizontally is called the Horizontal
Cycle. The inverse number of the Horizontal Cycle is called
Interlace and Non-Interlace
Methods
the bottom sequentially is called the Non-Interlace method
while showing odd lines and then even lines in turn is called
the Interlace method. The Non-Interlace method is used for
the majority of monitors to ensure a clear image. The Inter-
lace method is the same as that used in TVs.
Plug & Play
Resolution
This is a function that provides the best quality screen for
the user by allowing the computer and the monitor to ex-
change information automatically. This monitor follows the
international standard VESA DDC for the Plug & Play func-
tion.
The number of horizontal and vertical dots used to compose
the screen image is called the 'resolution'. This number
shows the accuracy of the display. A high resolution is good
for performing multiple tasks as more image information can
be shown on the screen.
Example: If the resolution is 1920 x 1080, this means the
screen is composed of 1920 horizontal dots (horizontal res-
olution) and 1080 vertical lines (vertical resolution).
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Correct Disposal
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with
separate collection systems)
This marking on the product, accessories or literature indicates that the
product and its electronic accessories (e.g. charger, headset, USB cable)
should not be disposed of with other household waste at the end of their
working life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate these items
from other types of waste and recycle them responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they purchased
this product, or their local government office, for details of where and how
they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product and its electronic ac-
cessories should not be mixed with other commercial wastes for disposal.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with
separate battery return systems.)
This marking on the battery, manual or packaging indicates that the bat-
teries in this product should not be disposed of with other household
waste at the end of their working life. Where marked, the chemical sym-
bols Hg, Cd or Pb indicate that the battery contains mercury, cadmium
or lead above the reference levels in EC Directive 2006/66. If batteries
are not properly disposed of, these substances can cause harm to human
health or the environment.
To protect natural resources and to promote material reuse, please sep-
arate batteries from other types of waste and recycle them through your
local, free battery return system.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with
separate battery return systems.)
The marking on the battery, manual or packaging indicates that the bat-
tery in this product should not be disposed of with other household waste.
Where marked, the chemical symbols Hg, Cd or Pb indicate that the bat-
tery contains mercury, cadmium or lead above the reference levels in EC
Directive 2006/66.
The battery incorporated in this product is not user replaceable. For in-
formation on its replacement, please contact your service provider. Do
not attempt to remove the battery or dispose it in a fire. Do not disas-
semble, crush, or puncture the battery. If you intend to discard the
product, the waste collection site will take the appropriate measures for
the recycling and treatment of the product, including the battery.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Authority
Information in this document is subject to change without notice.
© 2010 Samsung Electronics Co., Ltd. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Samsung Elec-
tronics Co., Ltd. is strictly forbidden.
Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental
or consequential damages in connection with the furnishing, performance, or use of this ma-
terial.
Samsung is the registered trademark of Samsung Electronics Co., Ltd.; Microsoft, Windows
and Windows NT are registered trademarks of Microsoft Corporation; VESA, DPM and DDC
are registered trademarks of Video Electronics Standard Association; All other product names
mentioned herein may be the trademarks or registered trademarks of their respective owners.
TruSurround XT, SRS and the
Labs, Inc.
symbol are trademarks of SRS
TruSurround XT technology is incorporated under license from SRS
Labs, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|