Samsung DVR SHR 7160 User Guide
SHR-7080/7082/7160/7162  
SHR-8080/8082/8160/8162  
8 Channel/16 Channel DVR  
User’s Manual  
imagine the possibilities  
Thanks you for purchasing this Samsung product.  
To receive a more complete service, please  
register your product at  
www.samsungsecurity.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb  
1
2008-12-04 오전 10:13:18  
important saFety instructions  
Read these operating instructions carefully before using the unit.  
Follow all the safety instructions listed below.  
Keep these operating instructions handy for future reference.  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
7) Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.  
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other  
apparatus (including amplifiers) that produce heat.  
9) Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has  
two blades with one wider than the other. A grounding type plug has two blades and a third  
grounding prong. The wide blade or the third prong are provided for your safety. if the provided  
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.  
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience  
receptacles, and the point where they exit from the apparatus.  
11) Only use attachments/accessories specified by the manufacturer.  
12) Use only with the cart, stand, tripod, bracket, or table specified by the  
manufacturer, or sold with the apparatus. When a cart is used, use  
caution when moving the cart/apparatus combination to avoid injury from  
tip-over.  
13) Unplug this apparatus during lightning storms or when unused for long  
periods of time.  
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has  
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been  
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or  
moisture, does not operate normally, or has been dropped.  
English _ꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb  
3
2008-12-04 오전 10:13:18  
overview  
BeFore start  
This user’s manual provides Information for using DVR such as brief introduction, part names, functions, connection  
to other equipment, menu setup, and the like.  
You have to keep in mind the following notices:  
~
~
~
SEC retains the copyright on this manual.  
This manual cannot be copied without SEC’s prior written approval.  
We are not liable for any or all losses to the product incurred by your use of non-standard product or violation of  
instructions mentioned in this manual.  
~
If you want to open the case of your system for checking problems, please consult the expert from the shop  
where you bought the product.  
~
~
You may download open source codes from the following website: www.samsungsecurity.com.  
Before installing an additional HDD or connecting an external storage device (USB memory or USB HDD) to this  
DVR, check the compatibility. Consult your provider for the compatibility list.  
warning  
❖ Battery  
Exchanging a wrong battery in your product may cause an explosion. Therefore you must use the same type  
of battery as the one being used in the product.  
The following are the specifications of the battery you are using now.  
~
~
~
~
Normal voltage: 3V  
Normal capacity: 170mAh  
Continuous standard load: 0.2mA  
Operating temperature: -20°C ~ +85°C  
(-4°F ~ +185°F)  
caLiFornia usa onLy  
This Perchlorate warning applies only to primary CR (Manganese Dioxide)  
Lithium coin cells in the product sold or distributed ONLY in California USA.  
“Perchlorate Material - special handling may apply,  
See www.dtsc.ca.gov/hazardouswaste/perchlorate.”  
The rechargeable battery incorporated in this product is not user replaceable.  
For information on its replacement, please contact your service provider.  
❖ system shutdown  
Turning off the power while the product is in operation, or taking not permitted actions may cause damage to  
the hard drive or the product. Also it can cause a dysfunction to the hard disk while using the product.  
Please turn off the power using the Power button on the front of your DVR.  
After selecting <oK> in the pop-up menu, you can pull off the power cord.  
You may want to install a UPS system for safe operation in order to prevent damage caused by an  
unexpected power stoppage. (Any questions concerning UPS, consult your UPS retailer.)  
❖ operating temperature  
The guaranteed operating temperature range of this product is 0°C ~ 40°C (32°F ~ 104°F).  
This product may not work properly if you run right after a long period of storage at a temperature below the  
guaranteed one.  
When using the device after a long period of storage at low temperature, place the product at room  
temperature for a while and run it.  
Especially for the built-in HDD in the product, its guaranteed temperature range is 5°C ~ 55°C (41°F ~ 131°F).  
Likewise, the hard drive may not work at a temperature below the guaranteed one.  
ꢂ_ overview  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb  
4
2008-12-04 오전 10:13:18  
standards approvals  
` This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15  
M
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the  
equipment is operated in a commercial environment.  
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance  
with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment  
in a residential area is likely to cause harmful interference in which case the user will be required to correct the  
interference at his own expense.  
package contents  
Please unwrap the product, and place the product on a flat place or in the place to be installed.  
Please check the following contents are included in addition to the main unit.  
Remote Control  
Mouse  
Power Cable  
RS-485 connector port  
SATA Cable  
NET-i Software / User’s Manual CD  
Remote Control Battery (AAA)  
Audio extension cable (optional)  
User’s Manual  
Bracket Rack  
English _ꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb  
5
2008-12-04 오전 10:13:22  
overview  
contents  
2
3
4
6
8
Features  
Important Safety Instructions  
Before Start  
Contents  
Part Names and Functions (Front)  
overview  
2
10 Part Names and Functions (Rear)  
12 Remote Control  
14 Checking the installation environment  
15 Rack Installation  
instaLLation  
15 HDD Addition  
14  
19 Connecting the Video, Audio, and Monitor  
19 Connecting the Network  
connecting with other device  
20 Connecting the USB  
20 Connecting External SATA HDD  
21 Connecting POS Device  
21 Connecting the Alarm Input/Output  
22 Connecting the RS-485 Device  
19  
23 Getting Started  
25 Live Screen Configuration  
29 Live Mode  
Live  
31 SPOT OUT  
32 Zoom  
32 AUDIO ON/OFF  
32 Freeze  
23  
33 Event Monitoring  
34 System Setup  
using the dvr  
41 Setting the Device  
48 Setting the Recording  
51 Setting the Event  
54 Backup  
55 Network Configuration  
62 Controlling a PTZ device  
34  
64 Search  
67 Playback  
search & pLay  
64  
ꢄ_ overview  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb  
6
2008-12-04 오전 10:13:22  
68 Introducing Web Viewer  
69 Connecting Web Viewer  
71 Using Live Viewer  
77 Using Search Viewer  
81 Viewer Setup  
weB viewer  
68  
91 About  
92 SEC Backup Viewer  
BacKup viewer  
92  
94 Product Specification  
97 Product Overview  
98 Default Setting  
101 Troubleshooting  
103 Open Source License Report on the Product  
appendix  
94  
English _ꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb  
7
2008-12-04 오전 10:13:23  
overview  
part names and Functions (Front)  
7080/8080  
1
ꢀ
ꢀ
ꢀ
ꢀ
ꢁ
ꢂ
10  
ꢆ
ꢆ
ꢆ
ꢆ
ꢅ
1
ꢄ
ꢃ
7160/8160  
ꢁ
ꢂ
10  
ꢅ
1
ꢄ
ꢃ
7082/8082  
ꢁ
ꢂ
10  
9
ꢅ
1
ꢄ
ꢃ
7162/8162  
ꢁ
ꢂ
10  
9
ꢅ
ꢄ
ꢃ
ꢆ_ overview  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb  
8
2008-12-04 오전 10:13:28  
Part Names  
Functions  
ALARM : Lights on when an event occurs.  
HDD : Displays the normal access to HDD.  
Upon access to HDD, LED repeats on and off.  
NETWORK : Displays both network connection and data transfer status.  
BACKUP : Displays when Backup is in progress.  
REC : Lights on when recording is in progress.  
PTZ : Sets PTZ Mode ON/OFF.  
LED Indicator  
ZOOM(TELE) : Sets the screen to the x2 digital zoom.  
Runs the TELE function in the PTZ Mode.  
FREEZE(WIDE) : Runs the FREEZE function in the Live Mode.  
Camera Control  
Runs the WIDE function in the PTZ Mode.  
BACKUP(VIEW) : Runs the BACKUP function.  
Runs the Preset View function in the PTZ Mode.  
SEARCH(PRESET) : Goes to the search screen.  
Runs the Preset Setup function in the PTZ Mode.  
REC  
Starts or ends the recording.  
Step Rewind (&) : Used for backward frame-by-frame search while in PAUSE.  
Fast Rewind (() : Used for quick backward search while in Play.  
(-x2,-x4,-x8,-x16,-x32,-x64)  
&/(  
STOP : Used to stop the playback.  
@
PLAY/PAUSE : Used to pause or resume the screen.  
+/#  
Fast Forward ()) : Used for quick forward playback. (x2, x4, x8, x16, x32, x64)  
Step Forward (*) : Used for forward frame-by-frame search while in PAUSE.  
)/*  
Direction &  
Select Button  
Used to change a value or move the cursor up/down/left/right (▲▼_ +).  
Selects a menu item or executes the selected menu.  
USB Port 1 & 2  
MODE  
Connects the USB devices.  
Each button press in the Live Mode switches the screen to 16-, 9-, 4-, 6-, 8-, 13- split screen,  
PIP, and auto sequence mode in order.  
In play mode, each press of the button will switch the screen mode to 13-, 1-, 4-, 9-, and 16-  
split in order. (1 live channel + (N-1) live channel)  
AUDIO  
Sets Audio ON/OFF.  
Cancels the ALARM LED and the audible alarm when the alarm is going off, and to remove the  
icon.  
ALARM  
MENU/RETURN  
Channel  
Either goes to the system menu screen or moves to the upper menu from the lower menu.  
Used to select channel numbers directly in the Live Mode, or numbers in the numeric input  
mode.  
When a scroll bar appears in each menu, acts as a scrolling.  
In Play mode, - Jog : Pauses the playback and steps backward or forward.  
- Shuttle : Fast playback forward or backward.  
Jog shuttle  
OPEN/CLOSE  
Power  
Used to open and close the DVR-RW disc tray. (available for SHR-7082/7162/8082/8162 only)  
Power LED : Displays the power ON/OFF status.  
Power Button : Used to turn the DVR ON/OFF.  
English _9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb  
9
2008-12-04 오전 10:13:29  
overview  
part names and Functions (rear)  
7080/7082 rear  
1 ꢀ ꢁ  
ꢂ ꢃ  
ꢄ ꢅ ꢆ 9 10  
11 1ꢀ 1ꢁ  
1ꢂ  
7160/7162 rear  
1 ꢀ  
ꢁ
ꢂ ꢃ  
ꢂ ꢃ  
ꢂ ꢃ  
ꢄ ꢅ ꢆ 9 10 11  
1ꢀ 1ꢁ  
1ꢂ  
1ꢂ  
1ꢂ  
8080/8082 rear  
1 ꢀ ꢁ  
ꢄ ꢅ ꢆ 9 10  
11 1ꢀ 1ꢁ  
8160/8162 rear  
1 ꢀ  
ꢁ
ꢄ ꢅ ꢆ 9 10 11  
1ꢀ 1ꢁ  
10_ overview  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 10  
2008-12-04 오전 10:13:35  
Part Names  
Functions  
VIDEO OUT  
AUDIO OUT  
VGA  
Composite Video Signal Output Port (BNC type connector).  
Audio Signal Output Port (RCA jack).  
VGA Video Signal Output Port.  
HDMI  
HDMI connector port.  
Audio input signal port (RCA Jack) and port for optional audio extension cable.  
SHR-716x/816x (Audio 5~16CH)  
AUDIO IN  
SHR-808x/708x (Audio 5~8CH)  
USB  
USB connector port.  
SATA 1/2  
NETWORK  
Ports used for external storage device connections. (SATA HDD)  
NETWORK connector port.  
A live screen output port, separate from the VIDEO OUT.  
SPOT 1: Supports Single, 4-, 9-, 16-split, and Auto Sequence modes  
SPOT 2: Supports Single, 4-split, and Auto Sequence modes (only for 5 ~ 8 CH).  
SPOT 3: Supports Single, 4-split, and Auto Sequence modes (only for 9 ~ 12 CH).  
SPOT 4: Supports Single, 4-split, and Auto Sequence modes (only for 13 ~ 16 CH).  
SPOT  
SHR-8162/8160 : SPOT 1,2,3,4  
SHR-8082/8080 : SPOT 1,2  
SHR-7162/7160/7082/7080 : SPOT 1  
RS-485  
ALARM  
Used for RS-485 communication. (TX+, TX-, RX+, RX-)  
- ALARM IN 1~16(SHR-7160,7162,8160,8162): Alarm Input port.  
- ALARM IN 1~8(SHR-7080,7082,8080,8082): Alarm Input port.  
- ALARM RESET IN: Alarm Reset port.  
- ALARM OUT 1–4: Alarm Output port.  
LOOP OUT  
VIDEO IN  
Used to transfer a video signal to other video devices.  
Composite Video Signal Input Port (BNC type connector).  
AC 100 ~ 230V (PAL)  
AC 110 ~ 220V (NTSC)  
AC 100-240V~ IN  
English _11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 11  
2008-12-04 오전 10:13:37  
overview  
remote controL  
dvr  
Available after switching to DVR mode by pressing the [dvr] button on the remote control.  
search  
BacKup  
Displays the Backup Menu.  
Displays the search menu．  
open/cLose  
Opens or closes the CD tray.  
mode  
Changes the screen mode．  
dvr  
Activates the DVR function.  
power  
Displays the Exit pop up screen．  
+
numBer [0~ 10]  
Used as the numeric input keys, or displays a single  
channel．  
id  
Sets the ID of the system.  
Select 2 digits from 0 ~ 9 while pressing the ID Key.  
skip Backward (by unit time),  
slow rewind, slow Forward,  
skip Forward (by unit time)  
move Frame  
While paused, moves to the previous/next frame.  
Fr, stop, pLay/pause, FF  
t/w  
ptZ  
Zooms in or out．  
Displays or ends PTZ.  
scroLL ,.  
Moves the menu scroll.  
menu  
return  
Goes to the system menu screen.  
Returns to the previous screen.  
up/down/Left/right(▲▼_ +)/enter  
Moves the cursor up/down/left/right, and runs the  
Select Menu．  
audio  
Turns Audio on/off.  
FreeZe  
aLarm  
Freezes the screen temporarily．  
Cancels the Alarm.  
Zoom  
Runs the digital zoom (x2) function.  
rec  
rec LocK  
Starts or ends the live recording．  
Selects the recording lock function.  
view  
preset  
Runs the View function in the PTZ mode．  
Displays the Preset Setup.  
using the numeric buttons  
CHANNEL 1–9  
CHANNEL 10  
Press each button between 1 to 9.  
+
Press the [ 10] button first, then press the 0 button again within 3 seconds.  
+
CHANNEL 11–16  
Press the [ 10] button first, then press any number between 1 to 6 within 3 seconds.  
1ꢀ_ overview  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 12  
2008-12-04 오전 10:13:38  
monitor  
Available after switching to Monitor mode by pressing the [monitor] button on the remote control.  
auto  
id reset  
Selects the screen status automatically．  
Initializes the ID value to 01.  
p.mode  
Selects the screen mode．  
power  
monitor  
Turns the monitor power on/off．  
Activates the monitor function.  
numBer [0~9]  
Changes the system ID.  
id  
Sets the ID.  
Select 2 digits from 0 ~ 9 while pressing the ID Key.  
+/-  
mute  
Adjusts the audio volume．  
Mutes the audio out.  
menu  
Displays the Setup Menu．  
up/down/Left/right(▲▼_ +)/enter  
Moves the cursor up/down/left/right, and runs the  
Select Menu.  
FreeZe  
Screen Freeze．  
source  
Selects the input signal source.  
under scan  
pip  
Displays the video screen within a screen．  
Selects or deselects the PIP function.  
using the numeric buttons  
CHANNEL 1–9  
Press any button among 1 to 9.  
changing the remote control id  
1. Press the ID button of the remote control and check the ID displayed on the DVR screen.  
The factory default ID of the remote control is 00.  
2. Enter 2 digits of your selection in order, while pressing the system [id] button.  
3. When ID input is done, press the system [id] button again to check the setting.  
` If you want to change the remote control ID to 08: Press 0 and 8 in order while the system [ID] button is pressed.  
Remote control's ID and DVR’s ID should be matched for proper operation. Refer to “Remote Devices”. (Page 45)  
M
English _1ꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 13  
2008-12-04 오전 10:13:40  
installation  
Please be noticed with the followings before you use the product.  
~
~
~
~
~
~
~
~
Do not use the product outdoor.  
Do not spill water or liquid in the connection part of the product.  
Do not impose the system to excessive shock or force.  
Do not pull out the power plug forcefully.  
Do not disassemble the product on your own.  
Do not exceed the rated input/output range.  
Use a certified power cord only.  
For the product with an input ground, use a grounded power plug.  
checKing the instaLLation environment  
~
Samsung Digital Video Recorder (“DVR” hereinafter) is a  
state-of-art security device, and contains mass storage  
hard disk(s) and critical circuits inside.  
Temperature  
Unit: ºC  
One Year: 24HR X 365 DAY =8,760 HR  
~
When the temperature rises inside the product, the product  
may breakdown and the product life be shortened. Please  
pay attention to the following recommendations before  
installation.  
Life (Unit: HOURS)  
The followings are the recommendations when Samsung DVR is installed on a rack.  
[Figure 1]  
1. Please ensure that the rack inside is not sealed.  
2. Please ensure the air is circulated through the inlet/outlet as shown in the picture.  
3. If the DVR or other devices on a rack is to be stacked as in the picture, provide a  
suitable space or install a ventilating opening for air circulation.  
4. For natural air convection, place the inlet at the bottom of the rack and the outlet on  
top.  
5. It is strongly recommended that a fan motor is installed at the inlet and the outlet for  
air circulation. (Please fit a filter at the inlet to screen dust or foreign substances.)  
6. Please maintain the temperature inside the rack or surrounding areas between 0°C  
~ 40°C (32°F ~ 104°F) as shown in the figure 1.  
Rack Mount Instructions - The following or similar rack-mount instructions are  
included with the installation instructions:  
A) Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly,  
the operating ambient temperature of the rack environment may be greater than  
room ambient. Therefore, consideration should be given to installing the  
equipment in an environment compatible with the maximum ambient temperature  
(Tma) specified by the manufacturer.  
B) Reduced Air Flow - Installation of the equipment in a rack should be such that the  
amount of air flow required for safe operation of the equipment is not  
compromised.  
[Figure 2]  
C) Mechanical Loading - Mounting of the equipment in the rack should be such that a hazardous condition is  
not achieved due to uneven mechanical loading.  
D) Circuit Overloading - Consideration should be given to the connection of the equipment to the supply circuit  
and the effect that overloading of the circuits might have on overcurrent protection and supply wiring.  
Appropriate consideration of equipment nameplate ratings should be used when addressing this concern.  
E) Reliable Earthing - Reliable earthing of rack-mounted equipment should be maintained. Particular attention should  
be given to supply connections other than direct connections to the branch circuit (e.g. use of power strips).  
1ꢂ_ installation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 14  
2008-12-04 오전 10:13:52  
racK instaLLation  
Loosen the screws on both sides (4 screws on each side) and install  
the Bracket-Rack as shown in the figure, and then fasten the screws  
on both sides (4 screws on each side).  
` Fix the screws not to be loosened by vibrations.  
hdd addition  
You can install additional HDDs.  
Make sure to unplug the power cord from the wall outlet to prevent possible electric shock, injury or product  
damage.  
Please consult your provider for further information on HDD installation since improper installation or settings may  
damage the product.  
` Number of HDDs supported : SHR-7082/7162/8082/8162: Default 1 HDD + Up to 4 HDDs added  
SHR-7080/7160/8080/8160: Default 1 HDD + Up to 5 HDDs added  
` Cautions for data loss (HDD care)  
J
Please pay attention so that the data inside the HDD is not damaged.  
Before adding a HDD, please check the compatibility with this DVR product.  
HDD is vulnerable to malfunction due to its sensitive nature against externalities or shocks during operation. Please  
ensure that the HDD is free from such shock or externalities.  
We are not liable for any damage to the HDD incurred by user’s carelessness or externalities.  
` Cases might cause damage to HDD or recorded data  
To minimize the risk of data loss from a damaged HDD, please backup data as often as possible.  
Data may be lost due to external impacts during disassembly or installation of the DVR.  
HDD may be damaged if the DVR is suddenly stopped by a power cut or power off during operation.  
HDD or files stored inside may be damaged if the main body is moved or impacted during the HDD operation.  
cautions when adding a hdd  
1. When adding a HDD, pay attention so that the cable does not get caught between unsuitable spaces or  
the cable’s insulation does not come off.  
ꢀ. Pay attention so as not to lose the disassembly screws or accessories.  
` If the screws or accessories are not put together, the product may breakdown or not operate properly.  
ꢁ. Please check the HDD compatibility before adding a HDD.  
` Please contact your nearest dealer to obtain the list of compatible devices.  
English _1ꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 15  
2008-12-04 오전 10:13:57  
installation  
adding a hdd  
` Make sure to unplug the power cord from the wall outlet before proceeding with the installation.  
M
` Number of HDDs to install : SHR-7082/7162/8082/8162 : Default 1 HDD + Up to 4 HDDs added  
SHR-7080/7160/8080/8160 : Default 1 HDD + Up to 5 HDDs added  
` By factory default, the master unit is equipped with one HDD.  
The following instructions are when you have installed the maximum number of HDDs on the master unit.  
1. First, loosen the screws in the left and right sides  
and remove the cover.  
Cover  
1) if adding hdds to shr-7080, 7160, 8080 & 8160  
` For SHR-7082/7162/8082/8162 models, see the following page.  
M
ꢀ. Loosen the screws (x4) in the left/right and upper  
Upper Bracket  
sides and remove the upper and lower brackets.  
Lower  
Bracket  
ꢁ. Install HDDs (x3) on the lower bracket and fix them  
with screws.  
Upper Bracket  
` The screw (UNC 6-32) to use in the installation comes with  
the HDD.  
Add  
Add  
Lower Bracket  
` Firmly secure the screw so that it can not get loose from  
such as vibration.  
Add  
ꢂ. Install HDDs (x2) on the upper bracket and fix them  
Add  
Installed by  
default  
with screws.  
Add  
1ꢄ_ installation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 16  
2008-12-04 오전 10:14:01  
ꢃ. When the installation of additional HDDs is done,  
insert the lower and upper brackets into the DVR  
and fix them with the provided screws.  
Upper Bracket  
Lower  
Bracket  
ꢄ. When the installation of additional HDDs is done,  
connect the power cable and connect the HDD  
signal cables (SATA Cable) to connectors ~ on  
the main board.  
` You can check the HDD map directly on the DVR.  
Refer to “Storage Device > HDD Map”. (Page 43)  
` Note that the order of
with the operation. Ju
connectors considerin
2) if adding hdds to shr-7082, 7162, 8082 & 8162  
ꢀ. Loosen the screws (x4) in the left/right and upper  
sides to remove the upper bracket and loosen the  
lower screws (x2) to remove the lower bracket.  
Upper Bracket  
Lower Bracket  
English _1ꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 17  
2008-12-04 오전 10:14:11  
installation  
ꢁ. Install a HDD (x1) on the lower bracket and fix it with  
screws.  
Upper Bracket  
ꢂ. Install HDDs (x3) on the upper bracket and fix them  
Add  
with screws.  
Add  
Add  
Lower Bracket  
Installed by default  
Add  
ꢃ. When the installation of additional HDDs is done,  
insert the lower and upper brackets into the DVR  
and fix them with the provided screws.  
Upper Bracket  
Lower  
Bracket  
ꢄ. When the installation of additional HDDs is done,  
connect the power cable and connect the HDD  
data cables (SATA Cable) to connectors ~ on  
the main board.  
` Note that the number of a HDD data calbe is nothing to do  
with operation of the HDD. Just make arrangements of the  
connectors consider
ꢅ. Check if the connectors are properly connected and  
there is no problem with wiring, and close the cover  
and fix it with screws.  
Cover  
1ꢆ_ installation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 18  
2008-12-04 오전 10:14:24  
connecting with other device  
` The following figures are based on Model SHR-8162.  
M
connecting the video, audio, and monitor  
LOOP OUT  
AUDIO IN  
SPOT  
VIDEO IN  
AC 100-240V~IN  
NETWORK  
USB 2.0  
RS-232  
AUDIO OUT  
CONSOLE  
SATA  
VIDEO OUT  
(composite)  
RS-485 / ALARM  
VIDEO OUT  
(VGA)  
HDMI  
connecting the networK  
connecting to internet through ethernet (10/100/1000Baset)  
RJ45 Ethernet Cable  
(Direct Cable)  
Back Bone  
Hub/Switcher  
Hub/Switcher  
Windows  
NET-i  
English _19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 19  
2008-12-04 오전 10:14:27  
connecting with other device  
connecting to internet through adsL  
RJ45 Ethernet Cable  
(Direct Cable)  
Phone(ADSL) Line  
ADSL MODEM  
Hub/Switcher  
Windows  
NET-i  
connecting the usB  
1. There are two USB ports at the front and one at the back of the product.  
ꢀ. You can connect a USB HDD, USB CD/DVD player, USB memory or mouse to the USB port.  
ꢁ. If a USB HDD is connected to the system, recognition and settings are available in “menu > setting the device >  
storage device”. (Page 43)  
ꢂ. This product supports hot-plugging, which connects/removes the USB device during the system operation.  
` The USB type HDD must be set as Master.  
J
` If you use the USB device for Backup purposes, format it with FAT32 on PC if it is not formatted on the DVR.  
connecting externaL sata hdd  
1. There are two external SATA ports on the rear side of the product.  
ꢀ. If an external SATA HDD is connected to the system, recognition and settings are available in “menu > device >  
storage device”.  
ꢁ. The DVR supports Hot Plug function to allow connection and disconnection of SATA HDD devices while the  
system is in use.  
` Only one SATA HDD can be connected to an external SATA port.  
J
` Use a cable shorter than 1 m for the external SATA HDD connections.  
ꢀ0_ connecting with other device  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 20  
2008-12-04 오전 10:14:29  
connecting pos device  
1. You can connect a POS device to the RS-232C port on the product’s rear side when you connect it directly with  
a RS-232C cable.  
ꢀ. Connection setup for the RS-232C port is available in “menu > device > pos devices”, press the  
<pos device setup> button and set <Baud rate, parity, data, stop bit and transfer type>. (Page 45)  
connecting the aLarm input/output  
The Alarm In/Out port at the back is composed of the following.  
1. Alarm In/Out Port on 7080/7082/8080/8082  
ꢀ. Alarm In/Out Port on 7160/7162/8160/8162  
~
~
~
ALARM IN 1 ~ 8 (SHR-7080/7082/8080/8082) : Alarm Input Port  
ALARM IN 1 ~ 16 (SHR-7160/7162/8160/8162) : Alarm Input Port  
ALARM RESET : On receiving an Alarm Reset signal, the system cancels the current Alarm Input and resumes  
sensing.  
~
ALARM OUT 1 ~ 4 : Alarm Output Port  
ALARM OUT  
ALARM IN  
ALARM IN  
English _ꢀ1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 21  
2008-12-04 오전 10:14:29  
connecting with other device  
connecting the rs-485 device  
Connect the RS-485 device through the back port.  
` For example, you can connect and control the PTZ  
camera which supports the RS-485  
communication.  
M
PTZ device  
Rear  
~
~
Transfer Type : You may select either Half Duplex or Full  
Duplex as the data transfer type.  
Baud Rate : Supported Baud rates are 600/1200/2400/  
4800/9600/19200/38400.  
Half Duplex Type  
Data (–)  
Tx(–)  
Tx(+)  
Data (+)  
` Check if the RS-485 device is compatible with the  
product first.  
M
` Pay attention not to change the polarity (+/-) of the  
RS-485 device when connecting it.  
Full Duplex Type  
Rx(+)  
` Depending on camera’s type, connection polarity can be  
different.  
For further information, refer to the respective PTZ  
Camera’s documentation.  
Rx(–)  
Rx(–)  
Rx(+)  
Tx(–)  
Tx(+)  
` Ex : DVR(TX+/-) SCC-C6433,35(RX+/-)  
DVR(TX+/-) SCC-C6403,07(TX+/-)  
ꢀꢀ_ connecting with other device  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 22  
2008-12-04 오전 10:14:30  
live  
getting started  
starting the system  
1. Connect the power cable of the DVR to the wall outlet.  
ꢀ. Press the Power button on the front panel.  
ꢁ. You will see the initialization screen.  
The initialization process will last about 1 minute in the  
order of icons appeared.  
If a new HDD is installed, the initialization process may take  
a longer time.  
ꢂ. The live screen appears with a beep.  
shutting down the system  
You can shut down the system only if you have logged in to the DVR.  
You should have the <shutdown> permission to shut down the system if you are not an admin.  
1. Press the [power] button on the remote control or the  
front panel, or right-click to display the context sensitive  
menu and select <shutdown>.  
ꢀ. The “shutdown” confirmation window appears.  
Shutdown  
Are you sure to shutdown?  
ꢁ. Use the arrow keys on the remote control or the front panel  
OK  
Cancel  
to move to <oK> and press the [enter] button or click  
<oK>.  
The system will shut down.  
` For the permission management, refer to “Permission  
Management > Setting Permissions”. (Page 38)  
M
English _ꢀꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 23  
2008-12-04 오전 10:14:33  
live  
Login  
To access a DVR or restricted menu, you should have logged in to the DVR.  
1. In live mode, right-click any area of the screen.  
You will see the context sensitive menu as in the right  
figure.  
Scene Mode   
Audio Off  
Freeze  
Stop Alarm  
Record  
Play  
Search  
Backup  
Main Menu  
Shutdown  
Launcher hide  
Login  
ꢀ. Click <Login>.  
The login dialog appears.  
You can also see the login dialog to access a desired menu  
by pressing the [menu] button on the remote control or  
the front panel.  
` The login dialog will also appear if you press a menu button on  
the remote control or the front panel of the DVR when the  
corresponding menu requires logging in.  
Login  
ID  
admin  
OK  
Password  
Cancel  
` For the restricted permission, refer to “Permission  
Management > Setting Permissions”. (Page 38)  
M
ꢀꢂ_ live  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 24  
2008-12-04 오전 10:14:35  
Live screen conFiguration  
icons on the Live screen  
You can check the status or operation of the DVR with the icons on the live screen.  
2009-01-01 00:00:01  
CAM 01  
Name  
Description  
Displays the current time and date.  
Current Date, Time  
Login Information  
When you are logged in, the “LOG ON” icon will be displayed.  
Displayed if the zoom function is activated.  
Displayed if you press the Pause button.  
Displayed in Auto Sequence mode where all channels are switched at the  
specific time interval.  
Screen Mode  
Displayed if the recording is in process.  
M To cancel the recording, enter the password.  
Displayed if there is a problem with the cooling fan.  
Displayed if the HDD is full and the DVR has an insufficient space to record.  
Displayed if no HDD is installed or the existing HDD should be replaced.  
Displayed if the HDD needs a technical examination.  
System Operation  
Video Input Status  
Displayed if a new firmware is found from the network.  
Displayed if no input is entered in the condition that the camera is set to <ON>.  
Nothing will be displayed on the screen if the camera is set to <OFF>.  
Camera Name/ Channel  
Displays the camera name and the changed channel, if any.  
Displays the resolution of the recording screen. (Page 50)  
Displayed in PTZ setting, and highlighted yellow if PTZ is in operation.  
Displays AUDIO ON/MUTE.  
Not displayed in video mode if deactivated.  
Camera Operation  
If the sensor is set to <ON>, the input signal will be displayed on the screen of  
the connected channel.  
Displayed if a motion detected in the condition that the motion detection is set to  
<ON>.  
Displays the current record mode from Record/Event/Schedule.  
English _ꢀꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 25  
2008-12-04 오전 10:14:39  
live  
error information  
~
If you turn on the system in the condition that the internal HDD is not connected or an error occurs, the  
“HDD FAIL” icon ( ) will be displayed on the top left corner. In this case, make sure you contact the  
service center for assistance as this may cause a failure of recording, playback or backup.  
~
If the cooling fan does not work properly or has a problem, the <Fan information> window will appear and  
the fan error icon (  
operations.  
) will be displayed on the top left corner. In this case, check the internal fan for  
As a fan error can shorten the product life, make sure you contact the service center for assistance.  
` If you see the fan error icon or No HDD, HDD FAIL icons on the screen, contact the service center for more details.  
M
Live screen menu  
In addition to the buttons on the front panel or the remote control, you can access a desired menu by right-  
clicking any area in live mode.  
The context sensitive menu appearing by right-clicking the screen differs, depending on the login/logout,  
screen split mode and DVD operation mode.  
` Menu items of Search, Record, Backup, Shutdown and PTZ can be deactivated, depending on the user permission.  
M
Scene Mode   
Scene Mode   
PTZ Control  
Audio Off  
ZOOM  
Freeze  
Audio  
Stop Alarm  
Record  
Freeze  
Stop Alarm  
Record  
Play  
Play  
Search  
Search  
Backup  
Backup  
Main Menu  
Shutdown  
Launcher hide  
Login  
Main Menu  
Shutdown  
Launcher hide  
Login  
PTZ  
Alarm  
Freeze  
< Single Mode Menu >  
< Split Mode Menu >  
split mode menu  
The context sensitive menu in split mode differs, depending on the login/logout status.  
Scene Mode  
SPOT OUT  
Audio Off  
Freeze  
1
ꢀ
ꢁ
ꢂ
Stop Alarm  
Record  
ꢃ
ꢄ
Play  
ꢅ
Search  
ꢆ
Backup  
9
Main Menu  
Shutdown  
Launcher hide  
Logout  
10  
11  
1ꢀ  
1ꢁ  
ꢀꢄ_ live  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 26  
2008-12-04 오전 10:14:43  
Menu  
Description  
Scene Mode  
SPOT OUT  
Audio On/Off  
Freeze  
Refer to “Live Mode”. (Page 29)  
Refer to “SPOT OUT”. (Page 31)  
Refer to “Audio ON/OFF”. (Page 32)  
Refer to “Freeze”. (Page 32)  
Stops the alarm output and the event monitoring. Refer to “Event Monitoring”.  
(Page 33)  
Stop Alarm  
Record/Stop  
Starts/stops the standard recording.  
Play  
Plays the search result (data). Refer to “Search & Play > Play”. (Page 67)  
Refer to “Search & Play > Search”. (Page 64)  
Search  
Backup  
Refer to “Using the DVR> Setting the Backup”. (Page 54)  
Accesses the main menu. Refer to the Using the DVR section. (Page 34)  
Turns down the DVR.  
Main Menu  
Shutdown  
Launcher Show/Hide  
Login/Logout  
Shows or hides the launcher. Refer to “View the Launcher Menu”. (Page 28)  
You can log in or out.  
single mode menu  
The single mode menu is available only in the Single mode.  
The context sensitive menu of the One Channel mode in Split mode is different from that of the Single mode.  
Full Screen  
1
SPOT OUT  
PTZ Control  
ZOOM  
ꢀ
ꢁ
Audio  
Freeze  
Stop Alarm  
Record  
Play  
Shutdown  
Launcher hide  
Logout  
PTZ  
Alarm  
Freeze  
Select and click a desired channel in Split mode to switch to the full screen of the selected  
channel.  
Full Screen  
Accesses the PTZ Control menu. The PTZ menu is activated only in One-Channel Live  
mode. (Page 62)  
PTZ Control  
ZOOM  
Enlarges the selected image. (Page 32)  
English _ꢀꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 27  
2008-12-04 오전 10:14:44  
live  
view the Launcher menu  
You can use the Launcher menu appearing on the bottom of  
the live screen to access it.  
1. In Live mode, right-click to display the context menu and  
select <Launcher show>.  
ꢀ. Move the cursor to the bottom and click a desired item in  
the Launcher menu.  
` If no input is entered for 10 seconds, the menu will disappear.  
M
` The Launcher menu can be accessed only using the mouse.  
PTZ Alarm Freeze  
Menu  
Description  
Displays the current time and date.  
The indication of AM/PM is displayed if you set 12 hours for the time format in  
Date/Time  
“System>Date/Time/Language>Time”. (Page 34)  
Displays in the sequence of 16-, 9-, 4-, 6-, 8-, 13-split, PIP and Auto Sequence.  
The current mode is highlighted in white.  
Screen Mode  
Menu Expansion Button  
Click to display the hidden menu to the right.  
Audio  
Zoom  
PTZ  
Turns ON/OFF the sound of the selected channel.  
Enlarges the selected area. This is available only in Single Live mode.  
Runs the PTZ Control launcher. This is available only in Single Live mode.  
Stops the alarm if it's activated.  
Alarm  
Freeze  
Freezes the Live screen temporarily.  
Play  
Enters Play mode if a file to play exist, and if not, enters Search mode.  
Start/End recording the Live screen.  
Record  
ꢀꢆ_ live  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 28  
2008-12-04 오전 10:14:46  
Live mode  
SHR-7160/7162/8160/8162 display Live images from 16 channels in a total of 8 layout of split screens.  
switching the screen mode  
To switch the split mode, select a screen mode in the launcher menu, or right-click to select a screen mode in  
the context menu.  
Press the [mode] button on the front panel or the remote control to switch the mode in the sequence of the  
launcher menu items.  
` SHR-7080/7082/8080/8082 do not support the 16-split screen mode.  
M
CH1  
CH5  
CH2  
CH6  
CH3  
CH7  
CH4  
CH8  
CH1  
CH4  
CH7  
CH2  
CH5  
CH8  
CH3  
CH6  
CH9  
CH2  
CH3  
CH1  
CH2  
CH1  
CH4  
CH9  
CH10  
CH14  
CH11  
CH15  
CH12  
CH16  
CH13  
CH5  
CH6  
CH3  
CH4  
16-split mode  
9-split mode  
4-split mode  
6-split mode  
CH2  
CH3  
CH4  
CH5  
CH7  
CH2  
CH3  
CH6  
CH1  
CH9  
CH1  
CH8  
CH4  
CH8  
CH2  
CH1  
CH1  
CH10  
CH11  
CH12  
CH13  
CH5  
CH6  
CH7  
8-split mode  
13-split mode  
PIP  
Auto Sequence  
switching the split mode  
SHR-7160/7162/8160/8162 display 16 Live images in the sequence of Single, 4-split and 9-split modes.  
auto sequence  
CH1  
CH4  
CH7  
CH2  
CH5  
CH8  
CH3  
CH6  
CH9  
16  
13-16  
9-12  
5-8  
1-4  
CH2  
CH1  
CH3  
10-16  
1-9  
CH1  
CH4  
1
Single mode  
4-split mode  
9-split mode  
` In Single mode, If you have set <SEQ-Dwell Time> in “Setting the Device>Camera”, Auto Sequence will be  
conducted at the set interval. (Page 41)  
M
` In a split mode, If you have set <Multi CH SEQ Time> in “Setting the Device>Monitor”, Auto Sequence will be  
conducted at the set interval. (Page 46)  
English _ꢀ9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 29  
2008-12-04 오전 10:14:50  
live  
manual switching  
Press the left/right button on the front panel or the remote control, or click the arrow <_/+> key to move to  
the next split mode.  
~
If pressing the right [  
9-split (CH 1~9) mode 9-split (CH 10~16) mode Auto Sequence  
+] button in 9-split mode:  
CH1  
CH4  
CH7  
CH2  
CH5  
CH8  
CH3  
CH6  
CH9  
CH10  
CH13  
CH16  
CH11  
CH14  
CH12  
CH15  
CH1  
CH4  
CH7  
CH2  
CH5  
CH8  
CH3  
CH6  
CH9  
;
;
10-16  
1-9  
~
If pressing the right [  
+] button in 4-split mode:  
Channel (CH 1~4) Channel (CH 5~8) Channel (CH 9~12) Channel (CH 13~16) Auto Sequence  
CH1  
CH3  
CH2  
CH4  
CH5  
CH7  
CH6  
CH8  
CH9  
CH10  
CH12  
CH13  
CH15  
CH14  
CH16  
;
;
;
CH11  
13-16  
CH1  
CH3  
CH2  
9-12  
5-8  
1-4  
CH4  
channel setting  
You can display the channel in a desired area of a split screen.  
1. Place the cursor over the camera name of each channel to display the <  
▼> key to the right on the screen.  
ꢀ. Click a camera name to display a channel list where you can select a different channel.  
ꢁ. Select a desired channel and click it.  
The current channel will be switched to the selected one.  
` Ex : if switching CH 1 to CH 7  
CH1  
CH5  
CH2  
CH6  
CH3  
CH7  
CH4  
CH8  
CH7  
CH5  
CH2  
CH6  
CH3  
CH1  
CH4  
CH8  
;
CH9  
CH10  
CH14  
CH11  
CH15  
CH12  
CH16  
CH9  
CH10  
CH14  
CH11  
CH15  
CH12  
CH16  
CH13  
CH13  
ꢁ0_ live  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 30  
2008-12-04 오전 10:14:53  
switching to single mode  
In a split mode, select and double-click a desired channel to switch to its Single mode.  
Press the number corresponding to a desired channel on the front panel or the remote control to switch to its  
Single mode.  
Refer to “remote control>using the numeric buttons”. (Page 12)  
` Ex : If double-clicking CH 3 or pressing the number “3” on the remote control or the front panel.  
CH1  
CH5  
CH2  
CH6  
CH3  
CH7  
CH4  
CH8  
;
CH9  
CH10  
CH14  
CH11  
CH15  
CH12  
CH16  
CH3  
CH13  
spot out  
The SPOT OUT monitoring is independent of the Live mode, which monitors a specific channel through the SPOT  
OUT port.  
selecting a spot out mode  
If an event occurs such as sensor, motion or alarm from the SPOT OUT port in connection with a monitor, you  
can select a output screen mode.  
1. In Live mode, right-click any area on the screen.  
Scene Mode   
CH1  
CH2  
SPOT OUT  
Audio Off  
Freeze  
SPOT OUT 1   
SPOT OUT 2   
SPOT OUT 3   
SPOT OUT 4   
16-split  
The Live menu appears.  
CH3  
9-split  
CH4  
4-split  
CH5  
ꢀ. Click SPOT OUT.  
Stop Alarm  
Record  
Auto Sequence  
CH6  
CH7  
Single  
The split screen appears according to the SPOT OUT  
source. (Page 47)  
` SPOT OUT 1 : Supports 16-, 9-, 4-split, Auto Sequence and  
Single modes.  
` SPOT OUT 2, 3, 4 : Supports 4-split, Auto Sequence and Single  
modes.  
CH8  
Play  
CH9  
Search  
CH10  
CH11  
CH12  
CH13  
CH14  
CH15  
CH16  
Backup  
Main Menu  
Shutdown  
Launcher hide  
Logout  
` For the SPOT OUT port of a model, refer to “Part Names and  
Functions (Rear)”. (Page 10)  
< Multichannel Live Menu >  
English _ꢁ1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 31  
2008-12-04 오전 10:14:55  
live  
Zoom  
This is available only in Single Live mode. In Single mode, select a desired area and use the Zoom function to  
enlarge it twice.  
1. Select <Zoom> in the right-click menu.  
Press the [Zoom] button on the front panel or the remote control, or simply click <  
> in the launcher  
menu. The zoom box appears.  
ꢀ. Use the direction keys, or drag and drop to specify an area to enlarge.  
ꢁ. Press the [enter] button, or double-click the selected area to enlarge it twice.  
` In the enlarged image, use the direction buttons (▲▼_ +) on the remote control or the front panel to move the  
enlarged area.  
ꢂ. Press the [Zoom] button on the front panel or the remote control, or simply click <  
> in the launcher  
menu to release the zoom.  
;
audio on/oFF  
You can turn the sound on/off corresponding to the channel in Live mode.  
audio on/oFF in single mode  
Click the audio icon ( ) on the screen, or press the [audio] button on the front panel or the remote control  
to turn it on/off.  
` Only the channel where <AUDIO> is set to <ON> in “Device>Camera” displays the audio icon ( ) in Live mode  
that you can use to turn the sound on/off.  
M
FreeZe  
This is available only in Live mode that stops playing the Live image temporarily.  
Freeze  
1. Press the [FreeZe] button on the front panel or the remote control, or click <  
> in the launcher  
menu.  
The playback of the image is stopped temporarily.  
Freeze  
ꢀ. Press the [FreeZe] button again, or click <  
>.  
This will release the freeze.  
ꢁꢀ_ live  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 32  
2008-12-04 오전 10:14:58  
event monitoring  
This will display the channel in sync with a specific event (Sensor/Motion/Video Loss) if it occurs.  
In “monitor>event display”, set the event monitoring to ON/OFF and specify the event display time.  
(Page 46)  
~
~
If multiple events occur simultaneously, the screen will switch to a split mode.  
- 2~4 events: 4-split mode  
- 5~9 events: 9-split mode  
- 10~16 events: 16-split mode  
If the second event occurs within the set time of <event display>, the first event will last until the second  
one is terminated. (Page 46)  
` Ex : If you set <Event Display> to 5 seconds, and only one event occurs in CH 1.  
Event occurrence  
5 seconds  
Stop alarm  
CH1  
`
Ex : If you set <Event Display> to 5 seconds, and the second event occurs in CH 2 within the set time after the first event  
occurred in CH 1.  
Event occurrence  
4 seconds  
9 seconds  
Stop alarm  
CH1  
CH2  
CH1  
` Press the [ALARM] button to reset the alarm settings and to release the event mode.  
M
` If an alarm activates in the condition you have set the event record, and pre/post alarm times, the event record will  
be performed.  
` This will also apply to the SPOT OUT monitor.  
English _ꢁꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 33  
2008-12-04 오전 10:14:59  
using the DVR  
You can setup the system properties, devices, and options for recording, event,  
backup and network.  
system setup  
You can setup Date/Time/Language, Permission, System Properties and Log.  
date/time/Language  
You can check and setup the current Date/Time and time related properties, as well as the language used for  
the interface on the screen.  
setting the date/time/Language  
Set the Date/Time/Language  
Using the mouse may help easy setup.  
1. Press the [menu] button on the remote control or on the  
front panel.  
` If not logged in, it prompts with login window.  
Refer to “Login”. (Page 24.)  
ꢀ. Use the left/right buttons (_ +) to select the <system>.  
Logout  
Exit  
System property setup menu is selected.  
ꢁ. Use the up/down buttons (▲▼) to select <date/time/  
Language> and press the [enter] button.  
System  
Date/Time/Language  
ꢂ. Select <date/time/Language>.  
Permission Management  
System Management  
Log Information  
A dialog to setup Date, Time and Language.  
ꢃ. Use direction buttons (▲▼_ +) to select an item to set  
and make your changes.  
~
~
~
Date : Sets the date appears on the screen.  
You can select the date format.  
Time : Sets the time and its format appear on the screen.  
Select either one from <24 hours, 12 hours (am/pm)>.  
Time Zone : Sets the time zone of your area based on the  
Greenwich Mean Time (GMT).  
Date/Time/Language  
Date/Time/Language  
Holiday  
Date  
2009 -01-01  
YYYY-MM-DD  
24 Hours  
Time  
08:14:24  
GMT+08:00  
Setup  
Time Zone  
Time Sync.  
DST  
Dec First (Sun) 0  
Dec First (Sun) 0  
` GMT (Greenwich Mean Time) is standard World Time and the basis  
of world time zone.  
Language  
English  
OK  
Cancel  
~
Time Sync. : You can set the DVR’s current time  
synchronized to a selected <time server> regularly if you  
select to use <time server>.  
In this case, <date/time/Language> setup does not allow time adjustment.  
ꢁꢂ_ using the DVR  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 34  
2008-12-04 오전 10:15:01  
- Time Server: Enter an IP or URL address of the time  
server.  
Date/Time/Language  
Date/Time/Language  
Holiday  
- Last Sync Time: Displays the most recent synchronization  
time from the selected time server.  
- Activate as Server: Set to <use> to allow the DVR to act  
as a Time Server for other DVRs.  
DST : Set up Daylight Saving Time with its period to make  
the time earlier than the GMT of its time zone by 1 hour  
during the set period.  
Language : Select your language. Sets the language for the  
interface.  
Time Synchronization Setup
Synchronization  
Time Server  
Last Sync Time  
Activate as Server  
Use  
203.248.240.103  
Fail  
Use  
~
~
OK  
OK  
Cancel  
Cancel  
Language  
English  
English, French, German, Spanish, Italian, Chinese, Russian, Korean, Polish, Japanese, Dutch, Portuguese,  
Turkish, Czech, Danish, and Swedish are available.  
ꢄ. When the Date/Time/Language setup is done, press <oK>.  
` You can also use numeric buttons on the remote control or front panel to enter values for Date, Time and other  
numeric fields.  
M
setting holiday  
You can set specific dates to Holidays according to your preferences.  
Holidays are applied to <recording schedule> and <alarm schedule> too.  
Using the mouse may help easy setup.  
ꢁ. Use the up/down buttons (▲▼) in <date/time/Language> window to select <date/time/Language>, and  
press the [enter] button.  
ꢂ. Select <holiday>.  
Date/Time/Language  
A calendar for Holiday setup appears.  
Holiday  
Date/Time/Language  
ꢃ. Use the left/right <  
> buttons to select year or month,  
2009  
Sun Mon Tue  
Jan  
and press the [enter] button.  
Wed Thu  
1
Fri  
2
Sat  
3
4
5
6
7
8
9
10  
17  
24  
31  
11  
18  
25  
12  
19  
26  
13  
20  
27  
14  
21  
28  
15  
22  
29  
16  
23  
30  
OK  
Cancel  
ꢄ. Use direction buttons (▲▼_ +) to select a desired date,  
and press the [enter] button.  
Date/Time/Language  
Holiday  
Date/Time/Language  
You will see the “setting holiday” screen.  
2009  
Jan  
` Ex: Select January 12th and check on <1/12> only to make every  
January 12th a holiday. Check both on <1/12> and <Jan 2nd  
Mon> to make every January 12th and 2nd Monday of January  
holidays.  
Setting Holiday  
1 / 12  
31  
Jan 2nd Mon  
25  
26  
30  
OK  
Cancel  
27  
28  
29  
ꢅ. When the Holiday setup is done, press <oK>.  
OK  
Cancel  
using the calendar  
Using the mouse may help easy setup.  
Select year and month.  
Select the left/right <  
adjust by 1 year/month.  
> key on the left/right side of year/month and press [enter] button to  
Use direction buttons to select a date and press [enter] button.  
` A date with recorded data to be searched will be appeared in yellow in the System Log, Event Log, Time Search  
and Event Search.  
English _ꢁꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 35  
2008-12-04 오전 10:15:03  
using the DVR  
permission management  
You can set permissions of each user over the DVR's specific function and settings.  
setting the administrator  
You can set and change Administrator’s ID and password.  
The administrator can use and set all menu items and functions.  
Using the mouse may help easy setup.  
ꢁ. Use the up/down buttons (▲▼) in <system> window to  
Permission Management  
move to <permission management>, and press  
Admin  
Group  
User  
Setup  
[enter] button.  
ID  
admin  
Password  
(Number only)  
********  
********  
ꢂ. Select <admin>. A dialog for Admin ID and Password  
Confirm P/W  
input appears.  
ꢃ. Use direction buttons (▲▼_ +) to move to a desired  
item, and set the ID and password.  
OK  
Cancel  
` By default, initial ID and password are set to “admin”, and  
“4321”.  
M
ꢄ. When the administrator setup is done, press <oK>.  
using virtual Keyboard  
For alphanumeric inputs, the virtual keyboard window  
appears.  
`
1
w
s
2
e
d
c
3
r
4
5
6
u
j
7
i
8
o
l
9
p
;
0
[
–
=
\
q
a
z
t
y
]
Del  
Use direction buttons (▲▼_ +) to move to a desired  
character, and press the [enter] button.  
f
g
b
h
n
k
,
‘
Caps Lock  
Shift  
x
v
m
.
/
Space  
Ctrl  
The selected character appears in the input field above the  
virtual keyboard layout.  
OK  
Cancel  
Press <oK> to enter the selected input.  
` For upper case letters, use <Caps Lock> button.  
` For special characters, use <Shift> button.  
` Using the virtual keyboard is the same to a normal keyboard use in your region.  
` Admin ID only allows lower case alphabets, numbers, “.” and ‘-’. Password only allows numbers.  
` You can use number buttons on the remote control or front panel.  
ꢁꢄ_ using the DVR  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 36  
2008-12-04 오전 10:15:05  
setting the group  
You can create a user group, and setup permissions of a user group.  
You can register a user for each group in <user>.  
Using the mouse may help easy setup.  
ꢁ. Use the up/down buttons (▲▼) in <system> window to  
move to <permission management>, and press  
[enter] button.  
Permission Management  
Group  
Admin  
User  
Setup  
Group  
ABC  
Add  
Delete  
Rename  
Group Authority  
Backup  
ꢂ. Select <group>.  
Record Lock  
Shutdown  
Search  
PTZ  
A window for <add>, <delete>, <rename>, and  
<group authority> setup appears.  
ꢃ. Use direction buttons (▲▼_ +) to move to a desired  
item, and set the value.  
OK  
Cancel  
~
Add, Delete, Rename : You can add, delete, rename a  
group or modify the permissions given to the group.  
The virtual keyboard appears when <add> or <rename> was selected.  
You can add up to 10 groups.  
` Refer to “Using Virtual Keyboard”. (Page 36)  
~
Group Authority : Sets permissions to access menu items of each group.  
Users of a group can access checked functions.  
ꢄ. When the group setup is done, press <oK>.  
setting the user  
Users can be added only if a group was created in <group> menu.  
Using the mouse may help easy setup.  
ꢁ. Use the up/down buttons (▲▼) in <system> window to  
move to <permission management>, and press  
[enter] button.  
Permission Management  
User  
Admin  
Group  
Group  
Group  
All Group  
Name  
Setup  
Add  
Delete  
ID  
Viewer  
ꢂ. Select <user>.  
A window for Add User appears.  
ꢃ. Use direction buttons (▲▼_ +) to select <add> from the  
window.  
Previous/Next Page  
A window for “add user” appears.  
You can set the name, ID, viewer, group and password of  
the user.  
OK  
Cancel  
Result of the user setup appears in the <user> window.  
To change the user property, use “edit user”.  
The “edit user” window appears when you select a  
desired item to be changed in the <user> window.  
Permission Management  
User  
Admin  
Group  
GrouName  
Group  
Setup  
AddUser  
Add  
Delete  
Kim
ksh  
ꢄ. When the user setup is done, press <oK>.  
ID  
Viewer  
Not Used  
ABC  
Select Group  
Password  
Confirm  
********  
********  
OK  
Cancel  
Previous/Next Page  
OK  
Cancel  
English _ꢁꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 37  
2008-12-04 오전 10:15:07  
using the DVR  
setting permissions  
You can set restricted access for all general users.  
Items with restrictions will require logging in for use.  
Using the mouse may help easy setup.  
ꢁ. Use the up/down buttons (▲▼) in <system> window to  
move to <permission management>, and press  
[enter] button.  
Permission Management  
Setup  
Admin  
Group  
User  
Restricted Access  
Backup  
All  
Record Lock  
Search  
PTZ  
Shutdown  
ꢂ. Select <setup>.  
Auto Log out  
OFF  
A window for Restricted Access and Auto Log out  
appears.  
ꢃ. Use direction buttons (▲▼_ +) to move to a desired  
item, and set the value.  
OK  
Cancel  
~
Restricted Access : All menu items allowed for a user can  
be set with restricted access.  
- Checked ( ) : Restricted  
- Not checked ( ) : Accessible  
` If it is not checked ( ) in <Restricted Access>, any user can access the item no matter what the <Group Authority>  
setting.  
` If it is checked ( ) in <Restricted Access>, a user can access the item only if the user has permission in <Group  
Authority> setting.  
~
Auto Log out : A user will be automatically logged out if there is no operation on DVR for over set period of  
time.  
ꢄ. When the permission setup is done, press <oK>.  
system management  
You can check the system version, update to a newer version, as well as data backup and initialization.  
checking the system information  
You can check the current system version, broadcasting system, MAC address. You can update the system.  
Using the mouse may help easy setup.  
ꢁ. Use the up/down buttons (▲▼) in <system> window to  
System Management  
move to <system management>, and press [enter]  
System Information  
Settings  
button.  
System Information  
Software Version  
v0.02_080826225303  
Broadcast Format  
NTSC  
ꢂ. Check the Version, Broadcast Format, and MAC Address.  
MAC Address  
00:00:F0:54:FF:FF  
~
System Information : Shows the current system’s  
information.  
S/W Upgrade  
Upgrade  
Device  
USB2FlashStorage  
Version  
v0.02_080826225303  
The values can not be changed by a user.  
~
S/W Upgrade : Updates the DVR’s software up to date.  
Previous  
ꢁꢆ_ using the DVR  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 38  
2008-12-04 오전 10:15:09  
~
Updating the Software  
1. Connect a device storing the software to be updated.  
System Management  
System Information  
(It may take about 10 seconds to recognize the device.)  
Settings  
System Information  
` You can use a USB memory or CD/DVD for updating.  
Software Version  
v0.02_080826225303  
System Upgrade  
Broa
ꢀ. Select <system management> from <system> window.  
ꢁ. Select <system information>.  
MAC
Current Version  
v0.02_080826225303  
New Version  
S/W
v0.02_080826225303  
Do you want to upgrade?  
Devi
OK  
Cancel  
Versi
ꢂ. When the recognized device appears, select <upgrade>.  
` The <Upgrade> button will be activated only if the current  
<Software version> of the <System information> is same to  
or older than that of <S/W Upgrade>.  
Previous  
ꢃ. Press <oK> in the “system upgrade” window.  
` While updating, it shows the progress.  
~
Updating progresses with 3 steps as shown in the figure.  
System Management  
System Information  
Settings  
System Information  
Software Version  
v0.02_080826225303  
BroadcaS/WUpgrade
MAC Ad
Software upgrading...  
S/W Up
Device  
Version  
Previous  
System Management  
System Information  
Settings  
System Information  
Software Version  
v0.02_080826225303  
Broadca
S/W Upgrade  
MAC Ad
Software upgrading...  
S/W Up
Do not turn off during the upgrade.  
Device  
Version  
Previous  
ꢄ. When the updating is done, it automatically restarts.  
Do not turn the power off until it finishes restarting.  
` If “Upgrade Failed” appears, retry from the step 4.  
When you experience continued failure, consult the service  
center for assistance.  
M
English _ꢁ9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 39  
2008-12-04 오전 10:15:12  
using the DVR  
settings  
You can copy and import the DVR settings by using a storage media.  
Using the mouse may help easy setup.  
ꢁ. Use the up/down buttons (▲▼) in <system> window to  
move to <system management>, and press [enter]  
button.  
System Management  
Settings  
System Information  
Storage Device  
1932 MB (Remained Capacity)  
Export  
Import  
DVRUSB  
38010100  
ꢂ. Select <settings>.  
USBDVR  
Include Network Settings  
A window of storage device and load factory default  
appears.  
Load Factory Default  
Default  
ꢃ. Use direction buttons (▲▼_ +) to move to a desired  
item, and export or import settings data to a storage  
device.  
Previous  
~
~
~
Storage Device : Shows the connected storage device.  
Export : Exports DVR settings to the connected storage device.  
Import : Imports DVR settings from the storage device and applies to the DVR.  
` If <Include Network Settings> is checked, the network settings will be imported too.  
~
Load Factory Default : If <default> is selected, a  
confirmation dialog for “Load Factory default” prompts.  
System Management  
Settings  
System Information  
Press <oK> to initialize the system to the factory default.  
Storage Device  
1932 MB (Remained Capacity)  
Load Factory Default  
DVR
ꢄ. To move to the previous menu, press <previous>.  
USB
Sure to Default Setting?  
OK  
Cancel  
Load
Previous  
Log information  
You can browse logs on the system and events.  
system Log  
System Log shows log and timestamp on every system start up, system shutdown, and changes on system  
settings.  
Using the mouse may help easy setup.  
ꢁ. Use the up/down buttons (▲▼) in <system> window to  
Log Information  
move to <Log information>, and press [enter] button.  
System Log  
Event Log  
Search  
Search Day  
First Page  
2009-01-01  
Last Page  
ꢂ. Select <system Log>.  
Type View all  
Date/Time  
No.  
Log List  
` Refer to “Using the Calendar”. (Page 35)  
Click on the calendar < > to display the calendar window.  
~
Type : When there are too many logs, you can display logs of  
the desired format by selecting the type.  
Previous/Next Page  
Previous  
ꢃ. Use direction buttons (▲▼_ +) to move to a desired item,  
and press <search>.  
ꢂ0_ using the DVR  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 40  
2008-12-04 오전 10:15:14  
event Log  
Event log shows recorded events on alarms, motion detections and video loss.  
It also shows the log and its timestamp.  
Using the mouse may help easy setup.  
ꢁ. Use the up/down buttons (▲▼) in <system> window to  
Log Information  
move to <Log information>, and press [enter] button.  
Event Log  
System Log  
Search Day  
First Page  
2009-01-01  
Last Page  
Search  
All CHs  
ꢂ. Select <event Log>.  
CH  
Type  
View all  
No.  
Log List  
Date/Time  
ꢃ. Use direction buttons (▲▼_ +) to move to the desired  
7
6
5
4
3
2
1
Motion Detection [CH 7]  
Motion Detection [CH 6]  
Motion Detection [CH 5]  
Motion Detection [CH 4]  
Motion Detection [CH 3]  
Motion Detection [CH 2]  
Motion Detection [CH 1]  
2009-01-01 00:02:18  
2009-01-01 00:02:18  
2009-01-01 00:02:18  
2009-01-01 00:02:18  
2009-01-01 00:02:18  
2009-01-01 00:02:18  
2009-01-01 00:02:18  
item.  
ꢄ. Set Search Day, Channel and Type and the press  
<search>.  
Previous/Next Page  
` Refer to “Using the Calendar”. (Page 35)  
Click on the calendar < > to display the calendar window.  
Previous  
setting the device  
You can setup Camera, Storage Device, Remote Device, POS Device and Monitor.  
camera  
setting the camera  
You can set Video, Audio, Channel Name and Dwell Time of a Camera.  
Using the mouse may help easy setup.  
1. Press the [menu] button on the remote control or front  
Logout  
Exit  
panel.  
ꢀ. Use the left/right button (_ +) to select <device>.  
Device setting menu is selected.  
Device  
Camera  
ꢁ. Use the up/down buttons (▲▼) to move to <camera>,  
Storage Device  
Remote Device  
POS Device  
Monitor  
and press [enter] button.  
ꢂ. Select <camera>.  
Camera  
Camera  
A window for setting Video, Audio, Channel Name and  
PTZ  
Dwell Time of a Camera appears.  
CH  
1
Video   
Audio   
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
CH Name  
CAM 01  
CAM 02  
CAM 03  
CAM 04  
CAM 05  
CAM 06  
CAM 07  
CAM 08  
SEQ-Dwell Time   
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
5 sec  
5 sec  
5 sec  
5 sec  
5 sec  
5 sec  
5 sec  
5 sec  
2
ꢃ. Use direction buttons (▲▼_ +) to move to a desired  
3
4
item, and set the value.  
5
6
7
8
~
Video  
Previous/Next Page  
Screen Setup  
- <on/oFF> : You can turn ON/OFF the selected  
channel’s camera.  
OK  
Cancel  
- <covert1> : Shows information other than the video of  
the selected channel.  
` For privacy protection, it does not display the video while the recording continues.  
- <covert2> : Shows nothing but an empty screen while the recording continues.  
English _ꢂ1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 41  
2008-12-04 오전 10:15:16  
using the DVR  
~
Audio  
- If set to <on>, you can turn the audio of the channel ON/OFF on the Live screen.  
- If set to <oFF>, the channel’s audio is off on the Live screen and not recorded.  
` Audio output is available for only 1 channel.  
~
~
~
CH Name : Up to 15 characters including blanks are allowed.  
` Refer to “Using Virtual Keyboard”. (Page 36)  
SEQ-Dwell Time: You can set the dwell time between channels for the Live screen and SPOT OUT.  
` If set to <OFF>, the channel is not listed in the Auto Sequence mode.  
Screen Setup : The video appeared on the screen may vary  
depending on the channel’s camera, configure the DVR  
display to your preferences.  
Select a channel and adjust the  
<
(Brightness)>,  
<
(contrast)>, and (color)> of the selected channel.  
<
~
Press the <init> to initialize settings back to the default 50.  
Screen Setup  
ꢄ. When the camera setup is done, press <oK>.  
CH1  
50  
50  
50  
Init  
Apply to All CH  
OK  
Cancel  
setting the ptZ  
To use Camera’s PTZ functions, ID and protocols of each camera and DVR should be matched.  
For other settings, refer to the “remote devices” settings. (Page 45)  
Using the mouse may help easy setup.  
ꢁ. Use the up/down buttons (▲▼) in <device> window to  
Camera  
move to <camera>, and press [enter] button.  
PTZ  
Camera  
CH  
1
ID  
Protocol   
ꢂ. Select <ptZ>.  
0
1
2
3
4
5
6
7
>
>
>
>
>
>
>
>
None  
None  
None  
None  
None  
None  
None  
None  
2
A window of PTZ settings appears.  
3
4
5
ꢃ. Use direction buttons (▲▼_ +) to move to a desired  
6
7
item, and select it.  
8
Previous/Next Page  
~
ID : Set the ID of the connected camera of each channel.  
You can easily setup by using the numeric buttons on the  
remote control or front panel.  
OK  
Cancel  
~
Protocol : Set the protocol of the connected camera of each channel.  
` You can check the camera’s ID and protocol if you turn the camera off and on after connecting it to the DVR.  
(Page 63)  
M
ꢄ. When the PTZ setup is done, press <oK>.  
ꢂꢀ_ using the DVR  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 42  
2008-12-04 오전 10:15:18  
storage device  
You can check information on storage devices.  
confirming devices  
You can check storage devices and their free space, usage as well as status.  
Devices available are HDD, and USB devices (memory, HDD, CD/DVD).  
Refer to “product specifications > Backup”. (Page 96)  
Using the mouse may help easy setup.  
ꢁ. Use the up/down buttons (▲▼) in <device> window to  
Storage Device  
move to <storage device>, and press [enter] button.  
Device  
Format  
HDD Alarm  
Device  
HDD  
No.  
1
Used/Total  
12.28G/499.37G  
Usage  
Status/Management  
Normal  
ꢂ. Select <device>.  
Internal  
~
No. : Shows the assigned number of the internal HDD.  
` To see the detailed positioning of the HDD according to the  
number, refer to <HDD Map>.  
HDD Map  
OK  
Cancel  
~
~
Used/Total: Shows the used/total capacity of the storage  
device.  
Usage: Sets the storage device’s usage.  
- USB memory is used only for backups.  
` External USB HDD, SATA HDD are used for extension and backup.  
~
~
Status/Management : Shows the current status of the HDD, as in Normal/Check/Replace.  
- Normal : Available to use  
- Check : Available to use but recommended to replace  
- Replace : Requires immediate replacement.  
HDD Map : Shows the internal HDD’s locations according to  
HDD Map  
assigned numbers.  
` Refer to this for servicing or additional HDD installation.  
ꢃ. To move to the previous menu, press <oK>.  
OK  
Formatting  
You can format a storage device.  
Using the mouse may help easy setup.  
ꢁ. Use the up/down buttons (▲▼) in <device> window to  
Storage Device  
move to <storage device>, and press [enter] button.  
Format  
Device  
HDD Alarm  
Device  
HDD  
Select  
1
Used/Total  
Usage  
ꢂ. Select <Format>.  
12.28G/499.37G  
Internal  
A window for selection of device for formatting appears.  
ꢃ. Use direction buttons (▲▼_ +) to select a device to be  
formatted.  
Format  
OK  
Cancel  
English _ꢂꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 43  
2008-12-04 오전 10:15:24  
using the DVR  
ꢄ. Select <Format> on the bottom of the screen.  
Press <oK> on the “manage” confirmation window will  
start formatting the selected device.  
Storage Device  
Format  
Device  
HDD Alarm  
Device  
HDD  
Select  
1
Used/Total  
Usage  
12.28G/499.37G  
Internal  
Manage  
ꢅ. When the formatting is done, press <oK>.  
Formatting deletes all recordings.  
Proceed formatting?  
OK  
Cancel  
Format  
OK  
Cancel  
hdd alarm  
You can set alarm settings for HDD defects such as Check Alarm Output Port, Replace Alarm Output Port,  
and its duration.  
Using the mouse may help easy setup.  
ꢁ. Use the up/down buttons (▲▼) in <device> window to  
Storage Device  
move to <storage device>, and press [enter] button.  
HDD Alarm  
Device  
Format  
ꢂ. Select <hdd alarm>.  
1
4
2
3
Check Alarm Output Port  
BEEP  
All  
A window for setting HDD check and replace output ports  
Duration  
OFF  
and their durations appears.  
Replace Alarm Output Port  
1
4
2
3
BEEP  
All  
ꢃ. Use direction buttons (▲▼_ +) to move to the desired  
Duration  
OFF  
item.  
~
Alarm  
OK  
Cancel  
- Alarm signal will output through the alarm out port on the  
rear side when selected <1>, <2>, <3>, and <4>.  
- If <Beep> was selected, a beep will sound.  
- If <all> was selected, both beep sound and alarm signal through rear side ports will output.  
~
~
~
Check Alarm Output Port : If HDD generates check alarm, the alarm signal will output to the specified alarm  
output port.  
Replace Alarm Output Port : If HDD generates replace alarm, the alarm signal will output to the specified  
alarm output port.  
Duration: Sets the alarm duration for the alarm signal and beep sound.  
- Check Alarm, Replace Alarm signals will output through the selected alarm out ports (1, 2, 3, and 4).  
- If <Beep> was selected, a beep will sound.  
- If <all> was selected, both beep sound and alarm signal through rear side ports will output.  
` <Check> status means that the HDD is operating but it has problems that require technical examination.  
M
(
) appears on the Live screen.  
` <Replace> status means that the HDD has defect and requires immediate replacement.  
) appears on the Live screen.  
(
ꢄ. When the HDD Alarm setup is done, press <oK>.  
ꢂꢂ_ using the DVR  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 44  
2008-12-04 오전 10:15:26  
remote devices  
You can set the RS-485 communication for use of PTZ Camera and system keyboard with the DVR.  
Using the mouse may help easy setup.  
ꢁ. Use the up/down buttons (▲▼) in <device> window to  
Remote Device  
move to <remote device>, and press [enter] button.  
Baudrate  
9600  
Parity  
None  
Data  
8
Stop Bit  
1
Transfer type  
Half Duplex   
ꢂ. Use direction buttons (▲▼_ +) to move to the desired  
item, and press [enter] button.  
System Keyboard  
Remote Control  
OFF  
ON  
ID  
ID  
00  
32  
ꢃ. Set the values of each communication setup of the remote  
device.  
~
Baud rate : Baud rate settings of the DVR, PTZ camera and  
system keyboard should be matched for proper operations.  
OK  
Cancel  
ꢄ. Make sure to match IDs of the DVR, System Keyboard  
and Remote Control, and press <oK>.  
` For changing the remote control’s ID, refer to “Changing the Remote Control ID”. (Page 13)  
M
pos devices  
You can set properties of POS devices connected to the DVR.  
A POS device connection requires channel, preset, and port/Ethernet settings.  
Using the mouse may help easy setup.  
ꢁ. Use the up/down buttons (▲▼) in <device> window to  
POS Device  
move to <pos device>, and press [enter] button.  
POS USE  
POS Device Setup  
POS  
CH  
Preset   
No preset  
No preset  
No preset  
No preset  
No preset  
No preset  
No preset  
No preset  
Port/Ethernet  
None  
ꢂ. Use direction buttons (▲▼_ +) to move to a desired  
1
2
3
4
5
6
7
8
None  
None  
None  
None  
None  
None  
None  
None  
None  
item, and set the value.  
None  
None  
None  
~
POS USE : When selected <pos use>, DVR and POS will  
be connected.  
None  
None  
None  
Previous/Next Page  
` If you change settings for the device and press <OK> while  
OK  
Cancel  
J
the <POS USE> is not checked, the changes for POS device  
will not be saved.  
~
POS Device Setup : Sets the communication setups for the  
POS device and DVR.  
POS Device  
POS USE  
POS Device Setup  
` It is independent to the Remote Device setup.  
POS  
CH  
Preset   
No preset  
Port/Ethernet  
None  
1
None  
POS Device Setup  
8
Data  
Baudrate  
9600  
Parity  
None  
Stop bit  
1
Transfer type  
Half Duplex  
8
None  
None  
OK  
Cancel  
No preset  
Previous/Next Page  
OK  
Cancel  
English _ꢂꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 45  
2008-12-04 오전 10:15:28  
using the DVR  
~
CH : Select the camera to be synchronized to the POS  
device.  
POS Device  
POS USE  
POS Device Setup  
` If selected a channel input field, “Sync Channel Setup” window  
POS  
CH  
Preset   
No preset  
Port/Ethernet  
None  
1
None  
appears.  
Sync Channel Setup  
8
None  
3
1
9
2
4
5
6
7
8
CH  
15  
` One POS device and be synchronized up to 16 cameras  
(channels), and a channel can not be synchronized to multiple POS  
devices.  
10  
11  
12  
13  
14  
16  
None  
OK  
Cancel  
No preset  
Previous/Next Page  
` Channels to be synchronized to a POS device should be set to  
“Event” in “Main Menu > Setting the Recording > Recording  
Schedule”. (Page 48)  
OK  
Cancel  
~
~
Preset : Sets the name, start and end strings of the receipt  
for the preset.  
POS Device  
Preset Setup  
` Preset name should be unique.  
Add  
Del  
Add Preset  
No.  
` Use <Add> button to display “Add Preset” window, and set its  
name, start string, and end string.  
Name  
Start Keyword  
End Keyword  
OK  
Cancel  
Cancel  
Port / Ethernet : Sets the port number for the DVR and POS  
device connection.  
OK  
OK  
Cancel  
` COM1 : For RS-232C connections  
` 7001~7016 : For Ethernet connections  
ꢃ. When the POS Device setup is done, press <oK>.  
monitor  
You can configure information to be displayed and its format for SPOT OUT monitor.  
setting the monitor  
Using the mouse may help easy setup.  
ꢁ. Use the up/down buttons (▲▼) in <device> window to  
Monitor  
move to <monitor>, and press [enter] button.  
Monitor  
SPOT OUT  
Mode  
ꢂ. Select <monitor>.  
Event Display  
OFF  
Date  
Display  
Time  
CH Name  
Icon  
Multi CH SEQ Time 5 sec  
ꢃ. Use direction buttons (▲▼_ +) to move to a desired  
item, and set the value.  
VGA  
800x600  
HDMI  
480p  
~
Event Display : Sets the dwell time of the event channel  
display on the monitor when an event occurs.  
If selected <continuous>, it displays the channel until you  
press [aLarm] button to release it.  
OK  
Cancel  
~
~
~
Display : Displays only checked items on the monitor  
screen.  
Multi CH SEQ Time : Sets the interval between automatic display switching in 4-split and 9-split mode of  
the Live screen.  
VGA, HDMI: Select between <vga> and <hdmi> for screen output.  
Outputs either one of <vga> and <hdmi>.  
If the output setting of <vga> or <hdmi> does not match to the monitor, video may not be produced.  
In this case, press and hold the [mode] and [Zoom] buttons simultaneously for around 5 seconds to  
change the video output.  
ꢄ. When the monitor setup is done, press <oK>.  
ꢂꢄ_ using the DVR  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 46  
2008-12-04 오전 10:15:30  
setting the spot out  
You can set the DVR to output information / video apart from the monitor out.  
Using the mouse may help easy setup.  
ꢁ. Use the up/down buttons (▲▼) in <device> window to  
Monitor  
move to <monitor>, and press [enter] button.  
SPOT OUT  
Monitor  
Mode  
ꢂ. Select <spot out>.  
Set Mode  
Set Mode  
Set Mode  
Set Mode  
ALL CH  
SPOT OUT 1  
16-split  
4-split  
4-split  
4-split  
CH 5,6,7,8  
SPOT OUT 2  
SPOT OUT 3  
ꢃ. Use direction buttons (▲▼_ +) to move to a desired  
SPOT OUT 4  
CH 9,10,11,12  
CH 13,14,15,16  
item, and set the value.  
Event Display  
OFF  
OK  
Cancel  
~
~
~
SPOT OUT1 : You can select between 16-, 9-, 4-split, Auto  
Sequence, and Single.  
Monitor  
SPOT OUT  
Monitor  
Mode  
SPOT OUT2~4 : Only supports 4 channels, with 4-split,  
Auto Sequence, and Single mode.  
SPOT
Set SPOT OUT  
SPOT
SPOT
SPOT
3
2  
4
1
5
2
16  
6
7
8
Set Mode : A window for “set spot out” appears and  
you can set the channel for it.  
9
10  
14  
11  
15  
12  
16  
13  
Event
OK  
You can set the dwell time between the screen switching in  
“setting the device > camera> seQ-dwell time”.  
(Page 41)  
OK  
Cancel  
~
Event Display : Sets the duration for the SPOT OUT on an  
event.  
If selected <oFF>, an event will not output to the SPOT OUT.  
` You can setup using the mouse right button in Live screen.  
Refer to “SPOT OUT”. (Page 31)  
M
ꢄ. When the SPOT OUT is done, press <oK>.  
setting the screen mode  
You can configure the Live screen and Split Screens.  
Using the mouse may help easy setup.  
ꢁ. Use the up/down buttons (▲▼) in <device> window to  
Monitor  
move to <monitor>, and press [enter] button.  
Mode  
Monitor  
SPOT OUT  
Live Split Mode  
ꢂ. Select <mode>.  
ꢃ. Use direction buttons (▲▼_ +) to move to a desired  
Play Split Mode  
item, and set the value.  
Live  
Play  
~
~
Live Split Mode : Select split modes for the Live screen.  
16-, 9-, and 4-split screens are included by default.  
Play Split Mode : Select split modes for the playback  
screen.  
OK  
Cancel  
Only the 13-split screen is optional.  
Black shows the playback while white shows the Live screen.  
ꢄ. When the screen mode setup is done, press <oK>.  
English _ꢂꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 47  
2008-12-04 오전 10:15:32  
using the DVR  
setting the recording  
You can setup scheduled recording, event recording and other recording related settings.  
recording schedule  
Make your reservation on a date and time to schedule the recording on specified time.  
Using the mouse may help easy setup.  
1. Press the [menu] button on the remote control or front  
Logout  
Exit  
panel.  
ꢀ. Use the left/right button (_ +) to select <record>.  
Record menu is selected.  
Record  
ꢁ. Use the up/down buttons (▲▼) to move to <recording  
Recording Schedule  
Event Record Duration  
REC Quality & Resolution  
Record Option  
schedule>, and press [enter] button.  
ꢂ. Select <recording schedule>.  
Recording Schedule  
A window of scheduled recording setup appears.  
CH1  
All  
0
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23  
ꢃ. Use direction buttons (▲▼_ +) to move to a desired  
Sun  
Mon  
Tue  
Wed  
Thu  
Fri  
item, and set the value.  
Sat  
Hol  
Apply to All CH  
No Recording  
Continuous  
Event  
OK  
Both(Cont&Evnt)  
Cancel  
~
Apply to All CH : If selected <apply to all ch>, “apply to  
all ch” window appears.  
Recording Schedule  
CH1  
Press <oK> to apply the setup to all channels.  
0
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23  
All  
Sun  
Mon  
Tue  
Wed  
Thu  
Fri  
Apply to All CH  
ꢄ. When the recording schedule setup is done, press <oK>.  
Apply recording schedule to all channels?  
OK  
Cancel  
Sat  
Hol  
Apply to All CH  
No Recording  
Continuous  
Event  
Both(Cont&Evnt)  
OK  
Cancel  
ꢂꢆ_ using the DVR  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 48  
2008-12-04 오전 10:15:34  
recording color tags  
color  
White  
Orange  
Blue  
Function  
description  
No schedule / event recording  
Scheduled recording only  
No Recording  
Continuous  
Event  
Event recording only  
Green  
Both(Cont&Evnt)  
Both scheduled / event recordings  
Each press of a selected cell will cycle through <no recording>-<continuous>-<event>-  
<Both(cont&evnt)>.  
event record duration  
You can set the beginning and ending point of a recording on an event.  
Using the mouse may help easy setup.  
ꢁ. Use the up/down buttons (▲▼) in <record> window to  
Event Record Duration  
move to <event record duration>, and press [enter]  
button.  
CH  
1
Pre Event   
OFF  
POST Event   
1 min  
2
OFF  
1 min  
3
OFF  
1 min  
ꢂ. Use direction buttons (▲▼_ +) to move to a desired  
4
OFF  
1 min  
5
OFF  
1 min  
item, and set the value.  
6
OFF  
1 min  
7
OFF  
1 min  
~
Pre Event : The recording will be kept from the point of set  
pre-event time earlier than the actual occurrence of an  
event.  
8
OFF  
1 min  
Previous/Next Page  
If it is set to 5 seconds, the recording begins from 5  
seconds before the event.  
OK  
Cancel  
~
Post Event : The recording will be kept to the point of set  
post-event time after than the actual end of an event.  
If it is set to 5 seconds, the recording ends in 5 seconds after an event.  
ꢃ. When the event recording duration setup is done, press <oK>.  
Quality / resolution  
You can set resolution, IPS, and quality of recordings by channel, and by recording type of standard / event.  
setting standard recording properties  
You can set each channel’s resolution, quality and IPS for normal recordings.  
Using the mouse may help easy setup.  
ꢁ. Use the up/down buttons (▲▼) in <record> window to  
REC Quality & Resolution  
move to <rec Quality & resolution>, and press  
Standard  
Event  
[enter] button.  
CH  
1
Resolution   
Record Rate   
7.5ips  
Record Quality   
CIF(S)  
CIF(S)  
CIF(S)  
CIF(S)  
CIF(S)  
CIF(S)  
CIF(S)  
CIF(S)  
Level4  
Level4  
Level4  
Level4  
Level4  
Level4  
Level4  
Level4  
2
7.5ips  
ꢂ. Select <standard>.  
3
7.5ips  
4
7.5ips  
5
7.5ips  
ꢃ. When the recording setup is done, press <oK>.  
6
7.5ips  
7
7.5ips  
8
7.5ips  
Previous/Next Page  
OK  
Cancel  
English _ꢂ9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 49  
2008-12-04 오전 10:15:35  
using the DVR  
setting event recording properties  
You can set each channel’s resolution, quality and IPS for event recordings.  
Using the mouse may help easy setup.  
ꢁ. Use the up/down buttons (▲▼) in <record> window to  
REC Quality & Resolution  
move to <rec Quality & resolution>, and press  
Event  
Standard  
[enter] button.  
CH  
1
Resolution   
Record Rate   
30ips  
Record Quality   
Full D1(L)  
Full D1(L)  
Full D1(L)  
Full D1(L)  
Full D1(L)  
Full D1(L)  
Full D1(L)  
Full D1(L)  
Level4  
Level4  
Level4  
Level4  
Level4  
Level4  
Level4  
Level4  
2
30ips  
ꢂ. Select <event>.  
3
30ips  
4
30ips  
Event recording setup window appears.  
5
30ips  
6
30ips  
7
30ips  
ꢃ. Use direction buttons (▲▼_ +) to move to a desired  
8
30ips  
item, and select it.  
Previous/Next Page  
~
Resolution : Sets the resolution of the recorded screen.  
OK  
Cancel  
` For SHR-7080,7082,7160,7162 models, setting the resolution to  
<Full D1(L)> limits the maximum supported channels to 4.  
resolution  
name  
resolution  
description  
Samples each half of horizontal and  
vertical screen.  
CIF(S)  
NTSC: 352 X 240, PAL: 352 X 288  
Half D1(M)  
Full D1(L)  
NTSC: 704 X 240, PAL: 704 X 288  
NTSC: 704 X 480, PAL: 704 X 576  
Samples half of the horizontal screen.  
Samples original screen size.  
~
~
Record Rate : Image Per Second, means the frames recorded per a second.  
Record Quality : Sets the recording quality.  
ꢄ. When the Event recording setup is done, press <oK>.  
record option  
You can set the recording to stop or overwrite when the HDD is full.  
Using the mouse may help easy setup.  
ꢁ. Use the up/down buttons (▲▼) in <record> window to  
Record Option  
move to <record option>, and press [enter] button.  
Disk End Mode  
Overwrite  
Disk End Beep  
ꢂ. Use direction buttons (▲▼_ +) to move to a desired  
Auto Delete  
1
day  
item, and set the value.  
OK  
Cancel  
ꢃ0_ using the DVR  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 50  
2008-12-04 오전 10:15:37  
~
Disk End Mode : If selected <overwrite>, recording will continue despite the HDD full while overwriting the  
oldest.  
If selected <stop>, the recording will stop when the HDD is full.  
~
~
Disk End Beep : If selected <stop>, the button is activated.  
If you check it, the beep will sound on the disk full and the recording stops.  
Auto Delete : If you check it, Record Period setup is activated.  
If you setup the auto delete, recorded data only in the configured period are searchable.  
ꢃ. When the recording option setup is done, press <oK>.  
setting the event  
You can set recording options for sensor, motion, and video loss event.  
sensor detection  
You can set the sensor’s operating condition and connected camera, as well as alarm output and its duration.  
Using the mouse may help easy setup.  
1. Press the [menu] button on the remote control or front  
Logout  
Exit  
panel.  
ꢀ. Use the left/right button (_ +) to select <event>.  
Event setting menu is selected.  
Event  
Sensor Detection  
Motion Detection  
Video Loss Detection  
Alarm Schedule  
ꢁ. Use the up/down buttons (▲▼) to move to <sensor  
detection>, and press [enter] button.  
Sensor Detection  
Sensor  
Sensor Operation   
Cam   
Alarm   
None  
None  
None  
None  
None  
None  
None  
None  
Duration   
A window of sensor detection setup appears.  
1
2
3
4
5
6
7
8
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
1
2
3
4
5
6
7
8
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
ꢂ. Use direction buttons (▲▼_ +) to move to a desired  
item, and set the value.  
~
Sensor Operation : Sets the operation mode of sensors.  
Previous/Next Page  
- <oFF> : Sensor does not operate.  
- <n.o (normal open)> : Sensor is opened.  
OK  
Cancel  
If the sensor is closed, it generates alarm.  
- <n.c (normal close)> : Sensor is closed.  
If the sensor is open by interruption, it generates alarm.  
~
Cam : Select a channel to be connected to the sensor.  
If selected camera, “cam preset setup” window appears.  
Select a channel and setup the preset.  
Sensor Detection  
SensCam Preset setup  
1
2
3
4
5
6
7
8
CH  
1
2
3
4
5
6
7
8
Preset  
CH  
Preset  
None  
9
None  
None  
None  
None  
None  
None  
None  
` Preset setup can be done in PTZ mode.  
10  
None  
None  
11  
12  
None  
None  
13  
14  
None  
None  
15  
None  
None  
16  
OK  
Cancel  
OK  
Cancel  
English _ꢃ1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 51  
2008-12-04 오전 10:15:39  
using the DVR  
~
Alarm : Sets the alarm output method.  
Sensor Detection  
` For further information on alarm output, refer to “HDD Alarm >  
Sensor  
Sensor Operation   
Cam   
Alarm   
None  
None  
Duration   
OFF  
Alarm”. (Page 44)  
1
2
3
4
5
6
7
8
OFF  
1
2
AlaOrmFF Setup  
OFF  
~
Duration : Sets the duration of alarm signal and alarm  
sound.  
1
4
2
3
BEEP  
All  
OK  
Cancel  
ꢃ. When the sensor detection setup is done, press <oK>.  
Previous/Next Page  
OK  
Cancel  
motion detection  
You can set target detection region and motion, as well as the alarm signal output.  
When the motion detection region is set, it detects motion within the area.  
Using the mouse may help easy setup.  
ꢁ. Use the up/down buttons (▲▼) in <event> window to  
Motion Detection  
move to <motion detection>, and press [enter] button.  
CH  
1
Mode   
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
Sensitivity   
Very High  
Very High  
Very High  
Very High  
Very High  
Very High  
Very High  
Very High  
Alarm   
None  
None  
None  
None  
None  
None  
None  
None  
Alarm Duration   
A window of motion detection area setup appears.  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
2
ꢂ. Use direction buttons (▲▼_ +) to move to a desired  
3
4
item, and set the value.  
5
6
~
~
~
Mode : Sets whether to activate motion detection.  
Sensitivity : Sets the sensitivity level of the motion detection.  
Alarm : Sets the alarm output method.  
7
8
Previous/Next Page  
Motion Region  
` For further information on alarm output, refer to “HDD Alarm >  
OK  
Cancel  
Alarm”. (Page 44)  
~
Alarm Duration : Sets the duration of alarm signal and alarm  
sound.  
ꢃ. When the motion detection setup is done, press <oK>.  
setting the motion detection area  
Select <motion region>.  
When “motion region” window appears, select a  
channel for detection and set the area of motion  
detection.  
Select  
Unselect  
Inverse  
Menu  
~
To set the area in “motion region” window  
In the “motion region” window, select desired region  
from < >.  
Motion Region  
1 CH  
Individual  
Cancel  
Select All  
~
To set the area using <individual> selection  
OK  
In the “motion region” window, you can select cells  
individually by using <individual>.  
When selected <individual>, “motion region” window disappears and you can select cells one by one.  
When the motion area setup is done, press the <menu> on the screen or the [menu] button on the  
remote control or front panel to display the “motion region” window again.  
- Select : Selected cell is set to be a part of motion detection area.  
- Unselect : Selected cell is removed from the motion detection area.  
- Inverse : Unselected cells are set to be the motion detection area.  
- Menu : After selecting individual motion areas, move to the “motion region” window.  
` If selected <Select All>, selected motion area is applied to all channels.  
When the motion detection setup is done, press <oK>.  
ꢃꢀ_ using the DVR  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 52  
2008-12-04 오전 10:15:44  
video Loss detection  
You can set the alarm to be generated on a camera disconnection, which causes a video loss.  
Using the mouse may help easy setup.  
ꢁ. Use the up/down buttons (▲▼) in <event> window to  
Video Loss Detection  
move to <video Loss detection>, and press [enter]  
button.  
A window of video loss detection area setup appears.  
CH  
1
Video Loss State   
Alarm   
1,2,3,4  
1,2,3,4  
1,2,3,4  
1,2,3,4  
1,2,3,4  
1,2,3,4  
1,2,3,4  
1,2,3,4  
Alarm Duration   
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
2
3
4
5
ꢂ. Use direction buttons (▲▼_ +) to move to a desired  
6
7
item, and set the value.  
8
Previous/Next Page  
~
~
Video Loss State : Sets whether to activate video loss  
detection.  
Alarm : Sets the alarm output method.  
OK  
Cancel  
` For further information on alarm output, refer to “HDD Alarm >  
Alarm”. (Page 44)  
~
Alarm Duration : Sets the duration of alarm signal and alarm sound.  
ꢃ. When the video loss detection setup is done, press <oK>.  
alarm schedule  
You can set the conditions and operating hours for scheduled alarms.  
Using the mouse may help easy setup.  
ꢁ. Use the up/down buttons (▲▼) in <event> window to  
Alarm Schedule  
move to <alarm schedule>, and press [enter] button.  
ꢂ. A window of <alarm schedule> settings appears.  
ꢃ. Alarm : Sets the alarm output method.  
Alarm1  
0
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23  
All  
Sun  
Mon  
Tue  
Wed  
Thu  
Fri  
` For further information on alarm output, refer to “HDD Alarm >  
Alarm”. (Page 44)  
Sat  
Hol  
OFF  
ON  
Event Sync  
Apply to All Alarm  
~
~
<on> : Marked in orange, and always generates alarm on  
scheduled time.  
<oFF> : Marked in white, no alarm is generated even if an  
event occurs.  
OK  
Cancel  
~
~
Event Sync : Marked in Blue, generates alarm only when an event occurs.  
Apply to All Alarm : Applies the configured schedule to all  
Alarm Schedule  
alarms.  
Alarm1  
0
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23  
All  
Sun  
Mon  
Tue  
Wed  
Thu  
Fri  
` When the alarm is generated on the scheduled time, you can  
stop the alarm by canceling the schedule.  
Apply to All Alarm  
M
Apply the alarm scheduling to all?  
OK  
Cancel  
ꢄ. When the Alarm Schedule setup is done, press <oK>.  
Sat  
Hol  
OFF  
ON  
Event Sync  
Apply to All Alarm  
OK  
Cancel  
English _ꢃꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 53  
2008-12-04 오전 10:15:46  
using the DVR  
BacKup  
You can check the backup device and set the backup schedule by channel or by time.  
The product only supports external HDD of USB memory/DVD and USB/SATA type. (Page 96)  
setting the Backup  
You can backup the desired data to a connected device.  
Using the mouse may help easy setup.  
1. Press the [menu] button on the remote control or front  
Logout  
Exit  
panel.  
ꢀ. Use the left/right button (_ +) to select <Backup>.  
Backup menu is selected.  
Backup  
Backup  
ꢁ. Press the [enter] button.  
Backup  
A backup window appears.  
You can directly access it from the “Live screen menu”.  
Start  
End  
2009-01-01 08:25:45  
2009-01-01 00:01:06  
~
Overlap  
List0  
(Page 26)  
1
9
2
3
4
5
6
7
8
CH  
ALL  
10  
11  
12  
13  
14  
15  
16  
ꢂ. Use direction buttons (▲▼_ +) to move to a desired  
Device  
None  
\20090101\  
Format  
AVI  
item, and set the value.  
Folder  
Filename 0001  
change  
Backup  
Check capacity  
~
~
~
Backup Range : Sets the <start> and <end> time for the  
backup.  
Channel : Sets the channel to backup.  
You can select multiple channels.  
Device : Select a backup device from the recognized devices.  
Used  
Free  
OK  
Cancel  
If the built-in internal CD/DVD or external USB CD/DVD is used for the backup, you can select the format of  
recording between AVI and SEC.  
` Since SHR-7080/7160/8080/8160 models do not have built-in internal DVD Writer, internal CD/DVD backup is not  
available.  
~
Format : Sets the backup data format.  
- AVI : Saves the CODEC information provided by the DVR with the recording data, and saved data can be  
played back by using external viewers (such as Windows Media Player) on a PC.  
- DVR : Saved data can be played back only by the DVR.  
- SEC : Saves data in the Samsung’s proprietary format with built-in viewer, which supports immediate  
playback on a PC.  
~
Filename : You can set the back file name.  
` Refer to “Using Virtual Keyboard”. (Page 36)  
~
~
Check capacity : Shows the size of the selected backup data, used and available capacity of the selected  
backup device.  
Overlap : Shows a list of overlapping data on a same time according to the number of data.  
It appears when one channel has multiple data on a certain time point due to changing of time or time zone  
settings, etc.  
` Refer to time and time zone of “Setting the Date/Time/Language”. (Page 34)  
ꢃꢂ_ using the DVR  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 54  
2008-12-04 오전 10:15:47  
ꢃ. When the backup setup is done, press <oK>.  
` If no available device is recognized for backup, <OK> button is not activated.  
` The application may slow down during the backup.  
J
` When a CD/DVD or memory device is used for backup, it is not available to use the full capacity of the media since  
the system consumes a part of its capacity.  
` If a CD or DVD media causes errors, the disc tray opens and closes a several times, and eventually backup process  
will fail. In this case, replace the CD/DVD media and try again.  
` Pressing the <Exit> during the backup will return to the previous menu, while the backup progresses.  
M
networK conFiguration  
It provides networked monitoring of Live screen from a remote place, and supports mail forwarding function with  
events. You can configure the network environment which enables such functions.  
connection mode  
You can set the network connection route and protocol.  
setting the connection  
Sets the protocol and environment of the network.  
Using the mouse may help easy setup.  
1. Press the [menu] button on the remote control or front  
Logout  
Exit  
panel.  
ꢀ. Use the left/right button (_ +) to select <network>.  
Network menu is selected.  
Network  
ꢁ. Use the up/down buttons (▲▼) to move to <connection  
Connection Mode  
DDNS  
mode>, and press [enter] button.  
Live Transfer  
Mailing Service  
ꢂ. Select <connection>.  
Connection Mode  
A window of connection mode setup appears.  
Connection  
Protocol  
ꢃ. Use direction buttons (▲▼_ +) to move to a desired  
Connection Mode  
Static IP  
2Mbps  
Bandwidth  
item, and set the value.  
IP  
192.168. 1.200  
~
~
Connection Mode : Sets the network connection mode.  
Bandwidth : Sets the maximum data flow to be transferred.  
(Upload speed)  
Gateway  
Subnet Mask  
DNS  
192.168. 1.  
255.255.255.  
Manual  
1
0
168.126. 63.  
1
Options will vary depending on the selected connection  
mode.  
OK  
Cancel  
- For <static ip>, <dynamic ip> : Select one from 128  
kbps ~ 2Mbps, and Unlimited.  
- For <adsL>, select one from 128 kbps ~ 600 kbps.  
English _ꢃꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 55  
2008-12-04 오전 10:15:48  
using the DVR  
~
IP, Gateway, Subnet Mask, and DNS  
- For <static ip> : You can directly input IP address,  
Connection Mode  
Connection  
Protocol  
Gateway, Subnet Mask and DNS.  
Connection Mode  
ADSL  
Bandwidth  
600kbps  
- For <dynamic ip> : IP address, Gateway, and Subnet  
IP  
192.168. 1.200  
Mask are set automatically.  
- For <adsL> : IP address, Gateway, and Subnet Mask  
Gateway  
Subnet Mask  
DNS  
192.168. 1.  
255.255.255.  
Manual  
1
0
168.126. 63.  
1
are set automatically.  
User ID  
ID  
Password  
********  
~
User ID, Password : In case you selected ADSL, provide the  
“user id” and its “password”.  
OK  
Cancel  
` DNS server for <Dynamic IP> and <ADSL> can be set by user only if you selected <Manual>.  
M
ꢄ. When the connection setup is done, press <oK>.  
setting the protocol  
ꢁ. Use the up/down buttons (▲▼) in <network> window to  
move to <connection mode>, and press [enter]  
button.  
Connection Mode  
Protocol  
Connection  
Protocol Type  
Port(TCP)  
TCP  
554 ~ 557  
8000 ~ 8159  
Unicast  
224.126. 63.  
5
ꢂ. Select <protocol>.  
Port(UDP)  
Unicast/Multicast  
Multicast IP  
TTL  
1
ꢃ. Use direction buttons (▲▼_ +) to move to a desired  
item, and set the value.  
Webviewer Port  
80  
~
Protocol Type : Select the protocol type between TCP and  
UDP.  
OK  
Cancel  
` If selected UDP, selections of Port (TCP), Port (UDP), and Unicast/  
Multicast are activated.  
~
~
~
Port (TCP) : Initially, <554~557> is set. It increases / decreases by 4.  
- TCP: It has better stability and lower speed when compared to UDP, and recommended for internet  
environments.  
Port (UDP) : Initially, <8000~8159> is set. It increases / decreases by 160.  
- UDP : It has less stability and faster speed when compared to TCP, and recommended for local area  
network (LAN) environments.  
Unicast, Multicast : Select one between Unicast and Multicast.  
If selected Multicast, Multicast IP and TTL are activated.  
- Unicast : Transfers data (UDP, TCP) individually to each connecting client.  
- Multicast : Multiple client can receive the data (only in UDP) without putting additional traffic load to the  
network.  
~
~
~
Multicast IP : User can directly input.  
TTL : Select from 0 ~ 255. Initial value for the TTL is set to <5>.  
Webviewer Port : Enter the port number for the Web Viewer. Initially, it is set to <80>.  
ꢄ. When the protocol setup is done, press <oK>.  
ꢃꢄ_ using the DVR  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 56  
2008-12-04 오전 10:15:50  
ddns  
You can set the DDNS site for a remote user’s network connection.  
Using the mouse may help easy setup.  
ꢁ. Use the up/down buttons (▲▼) in <network> window to  
DDNS  
move to <ddns>, and press [enter] button.  
DDNS Site  
OFF  
ꢂ. Use virtual keyboard to enter user inputs.  
Host Name  
User Name  
User Password  
` Refer to “Using Virtual Keyboard”. (Page 36)  
********  
` If selected <OFF> or <Samsung DDNS>, input fields are  
deactivated.  
ꢃ. When the DDNS setup is done, press <oK>.  
OK  
Cancel  
` Refer to <DDNS Setting>. (Page 59)  
M
connecting and setting the network  
Networking may differ from the connection method, check your environment before setting the connection  
mode.  
when no router is used  
~
static ip mode  
- Internet connection : Static IP ADSL, leased line, and LAN environments allows connection between the  
DVR and remote user.  
- DVR Network Settings : Set the <connection mode> in  
Connection Mode  
<connection> menu of the connected DVR to <static ip>.  
Connection  
Protocol  
` Consult your network manager for IP, Gateway and Subnet Mask.  
Connection Mode  
Static IP  
2Mbps  
Bandwidth  
IP  
192.168. 1.200  
Gateway  
Subnet Mask  
DNS  
192.168. 1.  
255.255.255.  
Manual  
1
0
168.126. 63.  
1
OK  
Cancel  
~
dynamic ip (dhcp) mode  
- Internet connection : Connect the DVR directly to a cable modem, DHCP ADSL modem or FTTH network.  
- DVR Network Settings : Set the <connection mode> in <connection> menu of the connected DVR to  
<dynamic ip>.  
~
adsL (pppoe: id and password certification)  
- Internet connection : An ADSL modem is directly connected to the DVR, where the ADSL connection  
requires user ID and password.  
- DVR Network Settings : Set the <connection mode> in  
<connection> menu of the connected DVR to <adsL>.  
Connection Mode  
Connection  
Protocol  
` ADSL <User ID> and <Password> should be the same to the  
ADSL user information.  
Connection Mode  
ADSL  
Bandwidth  
600kbps  
IP  
192.168. 1.200  
If you don’t know the ID and password, consult your ADSL service  
provider.  
Gateway  
Subnet Mask  
DNS  
192.168. 1.  
255.255.255.  
Manual  
1
0
168.126. 63.  
1
User ID  
ID  
Password  
********  
OK  
Cancel  
English _ꢃꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 57  
2008-12-04 오전 10:15:51  
using the DVR  
when a router is used  
` To avoid IP address conflict with the DVR's static IP, check followings:  
J
~
setting the dvr with a static ip  
- Internet connection : You can connect the DVR to a router which is connected to an ADSL/Cable modem or  
a router in a Local Area Network (LAN) environment.  
~
setting the dvr network  
1. Set the <connection mode> in <connection> menu of the connected DVR to <static ip>.  
ꢀ. Check whether the set IP address is in the static IP range provided by the IP router.  
IP, Gateway, and Subnet Mask : Consult your network manager.  
` Check whether the set IP address is in the static IP range provided by the IP router.  
` If a DHCP server is configured with starting address (192.168.0.100) and end address (192.168.0.200), you should  
J
set the IP address out of the configured DHCP range (192.168.0.2 ~ 192.168.0.99 and 192.168.0.201 ~  
192.168.0.254).  
ꢁ. Check the Gateway address and subnet mask are equal to those set in the IP router.  
~
setting the dhcp ip address of the ip router  
1. To access the IP router’s configurations, open a web browser on the local PC that is connected to the IP  
router and enter the router’s address (ex: http://192.168.1.1).  
ꢀ. At this stage, make the local PC's windows network configurations to the below example:  
Ex) IP : 192.168.1.2  
Subnet mask : 255.255.255.0  
Gateway : 192.168.1.1  
- Once connected to the IP router, it prompts with password. While entering nothing to the User Name field,  
enter “admin” into the password field and press <oK> to access the router configurations.  
- Access the router’s DHCP configuration menu and set its DHCP server activation, and provide the start and  
end address.  
Set the start address (192.168.0.100) and end address (192.168.0.200).  
` Above steps may differ from the router devices depending on the manufacturer.  
M
~
setting router’s port Forwarding  
1. Set the protocol to <tcp>.  
Connection Mode  
Protocol  
Connection  
ꢀ. External Port Range : Enter the TCP Port set in the  
<port (tcp)> in <protocol> menu of the connected DVR.  
If more than one DVRs are connected to the router, the  
TCP port can be different.  
Protocol Type  
Port(TCP)  
TCP  
554 ~ 557  
8000 ~ 8159  
Unicast  
224.126. 63.  
5
Port(UDP)  
Unicast/Multicast  
Multicast IP  
TTL  
1
ꢁ. Internal PC IP Address : Enter the IP address set to the  
Webviewer Port  
80  
<ip> in <connection> menu of the connected DVR.  
ꢂ. Internal Port Range : Set the same to the “external port  
OK  
Cancel  
range”.  
` Above steps may differ from the router devices depending on the manufacturer.  
Port forwarding is required when you want to access the DVR connected to the router from outside of the router’s  
network.  
M
ꢃꢆ_ using the DVR  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 58  
2008-12-04 오전 10:15:52  
ddns setting  
DDNS is a short form of Dynamic Domain Naming System.  
DNS (Domain Name System) is a service that routes a domain name consisting of user friendly characters  
(ex: www.google.com) to an IP address consisting of numbers (64.233.189.104).  
DDNS (Dynamic DNS) is a service that registers a domain name and the floating IP address with the DDNS  
server so that the domain name can be routed to the IP address even if the IP is changed in a dynamic IP  
system.  
~
setting ddns in the dvr  
Set <protocol type> in the <protocol> menu of the connected DVR to the following:  
Ex) Protocol Type : TCP  
Port (TCP) : 0554,0555,0556,0557  
DDNS Site : Samsung DDNS  
~
ddns settings of the router  
Select the corresponding menu for the network transfer protocol of the router.  
Live transfer  
Sets the quality of the image that is transferred from the DVR to the network.  
Using the mouse may help easy setup.  
ꢁ. In the <network> setting window, press the up/down  
Live Transfer  
(▲▼) button to move to <Live transfer> and press the  
Resolution  
CIF(S)  
Low  
[enter] button.  
Quality  
The Live Transfer window appears.  
ꢂ. Use the direction buttons (▲▼_ +) to move to a desired  
item and set the value.  
ꢃ. When the live transfer is done, press <oK>.  
` For the resolution of the live transfer, refer to “Resolution”.  
(Page 50)  
OK  
Cancel  
` For SHR-7080,7082,7160 and 7162, only Half D1(M) or lower is available.  
M
English _ꢃ9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 59  
2008-12-04 오전 10:15:53  
using the DVR  
mailing service  
You can send an e-mail to a DVR-registered user at a specific time interval, or if an event occurs.  
smtp setting  
Sets the SMTP mail server.  
Using the mouse may help easy setup.  
ꢁ. In the <network> setting window, press the up/down  
Mailing Service  
(
▲▼) button to move to <mailing service> and press the  
SMTP  
Event  
SMTP mail Server  
11  
Group  
Recipient  
[enter] button.  
ServerType  
Server  
Port  
ꢂ. Select <smtp>.  
Use Authentication  
You will see the SMTP setting window.  
User  
Password  
********  
ꢃ. Use direction buttons (▲▼_ +) to move to a desired item  
Secure Transfer  
Sender  
Never/TLS  
and set the value.  
ex. [email protected]  
TEST  
~
~
~
~
Server Type : Displays the connected server type.  
Server : Enter a server to connect to.  
Port : Sets the communication port.  
Use Authentication : Check this if the SMTP server uses user authentication.  
The account input box will be activated.  
OK  
Cancel  
~
~
~
~
User : Enter a user to use authentication when connecting to the SMTP server.  
Password : Enter the password of the SMTP server user.  
Secure Transfer : Select one from <never/tLs> and <if available/tLs/ssL>.  
Sender : Use the virtual keyboard to enter the sender’s e-mail address.  
` Refer to “Using Virtual Keyboard”. (Page 36)  
~
Test : Conducts the test on the server settings.  
ꢄ. When the SMTP setting is done, press <oK>.  
event setting  
You can set the interval and type of the event that will be sent to the user.  
Using the mouse may help easy setup.  
ꢁ. In the <network> setting window, press the up/down  
Mailing Service  
(▲▼) button to move to <mailing service> and press the  
Event  
SMTP  
Group  
Recipient  
[enter] button.  
Event Interval  
10 min  
Use Event Transfer  
Alarm  
ꢂ. Select <event>.  
Motion  
Change P/W  
Power On/Off  
HDD Info  
Video Loss  
ꢃ. Use direction buttons (▲▼_ +) to move to a desired item  
Manual Record  
and set the value.  
~
Event Interval : Set the event interval.  
` If a series of events occurs, the e-mail will be sent at the specified  
interval, not on each event.  
OK  
Cancel  
~
Use Event Transfer : Select an event type to send if an event occurs.  
If the selected event occurs, the e-mail will be sent to the group that has the recipient authority.  
ꢄ. When the event setting is done, press <oK>.  
ꢄ0_ using the DVR  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 60  
2008-12-04 오전 10:15:54  
group setting  
You can set the group to whom the e-mail is sent, and specify the permission for each group.  
You can add recipients for each group in the <recipient> menu item.  
The recipient is set separately from the DVR user group.  
Using the mouse may help easy setup.  
ꢁ. In the <network> setting window, press the up/down  
Mailing Service  
(▲▼) button to move to <mailing service> and press the  
Group  
SMTP  
Event  
Recipient  
[enter] button.  
Group  
Add  
Delete  
Rename  
Recipient Permission  
Alarm  
ꢂ. Select <group>.  
Motion  
Change P/W  
Power On/Off  
HDD Info  
Video Loss  
ꢃ. Use direction buttons (▲▼_ +) to move to a desired item  
Manual Record  
and set the value.  
~
Add : Select <add> and use the virtual keyboard to add a  
group.  
OK  
Cancel  
` Refer to “Using Virtual Keyboard”. (Page 36)  
~
~
~
Delete : Deletes the selected group.  
Rename : You can reset the recipient permission of an existing group.  
Recipient Permission : Set the permission of the recipient group.  
ꢄ. When the group setting is done, press <oK>.  
recipient setting  
You can add a user to the group or delete him/her from the group, or change the group.  
Using the mouse may help easy setup.  
ꢁ. In the <network> setting window, press the up/down  
Mailing Service  
(▲▼) button to move to <mailing service> and press the  
Recipient  
SMTP  
Event  
Group  
[enter] button.  
Group  
All Group  
Add  
Group  
Name  
e-Mail Address  
Delete  
ꢂ. Select <recipient>.  
ꢃ. Use direction buttons (▲▼_ +) to move to a desired item  
and set the value.  
Previous/Next Page  
OK  
Cancel  
~
Add : You can select a recipient name, e-mail address or  
group.  
Mailing Service  
Recipient  
SMTP  
Event  
Group  
You should have created a group in the <group> menu  
item before you can add a user to the group.  
Group  
ABC  
Add  
GroAdd User  
Delete  
Name  
` Refer to “Using Virtual Keyboard” for input of the user name and  
the e-mail address. (Page 36)  
Email  
Select Group  
ABC  
OK  
Cancel  
ꢄ. When the recipient setting is done, press <oK>.  
Previous/Next Page  
OK  
Cancel  
English _ꢄ1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 61  
2008-12-04 오전 10:15:56  
using the DVR  
controLLing a ptZ device  
The DVR enables you to adjust the settings of a PTZ camera as well as an ordinary one to your preference.  
ptZ device  
The PTZ device can be activated only if a channel in connection with the PTZ camera is selected.  
getting started with ptZ  
The PTZ camera is available, only if a channel is selected, in the following way:  
` Using the button on the remote control or the front panel  
Select the [PTZ] button on the remote control or the front panel.  
Scene Mode   
SPOT OUT  
PTZ Control  
ZOOM  
Audio  
` Using the launcher menu  
Freeze  
PTZ  
Stop Alarm  
Record  
Click PTZ <  
> to display the live launcher.  
Play  
` Using the right-click menu in Live mode  
Right-click any area on the screen to display the context menu, and  
select <PTZ Control>.  
Search  
Backup  
Main Menu  
Shutdown  
Launcher hide  
Logout  
PTZ  
Alarm  
Freeze  
` Using icons on the live screen  
Click the PTZ <  
> icon on the live screen.  
` The PTZ function is available only if the PTZ camera is  
connected so that the PTZ icon is displayed on the screen.  
M
using the ptZ camera  
You can use one camera to perform all functions of PAN, TITL and ZOOM for monitoring multiple places and  
set the preset to your preference in a desired mode.  
1. Launch the <ptZ control> menu.  
As the PTZ <  
> icon on the bottom right corner turns  
yellow, you access the “ptZ control” mode to display the  
“ptZ control” menu.  
ꢀ. Use direction keys in the launcher menu or use direction  
buttons (▲▼_ +) on the remote control or the front panel  
to move the target area to record.  
PTZ Control CAM01  
Auto Pan  
Preset  
Select Preset  
Scan  
~
~
Zoom : You can use the Zoom function of the PTZ camera.  
Auto Pan : The camera automatically runs between the two  
points that you selected.  
Scan : The camera moves to the preset points in the  
specified sequence.  
OK  
Save/Add  
Delete  
Rename  
Pattern  
Cam. Setup  
Delete All  
~
If multiple presets are specified, the PTZ camera will automatically move to all of the preset points one at a  
time.  
~
Pattern : Makes the PTZ camera remember and follow the past route.  
` The functions of Auto Pan, Scan and Pattern are supported in the protocols of Samsung, Panasonic and Pelco, and are  
different in terms of the name and setting, depending on the protocols of Samsung, Panasonic and Pelco.  
(Panasonic : Auto Pan, Sequence, Sort / Pelco : Auto Pan, Frame Scan, Pattern)  
` Before entering the PTZ device control mode, set the values of the PTZ device in the <Setting the PTZ> menu.  
(Page 42)  
M
ꢄꢀ_ using the DVR  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 62  
2008-12-04 오전 10:16:00  
preset setting  
A preset is a set of specific target points of a PTZ camera, and up to 20 presets per a camera can be stored.  
Using the mouse may help easy setup.  
1. In PTZ Control mode, use the direction buttons to adjust the camera in a desired direction.  
ꢀ. Select the <save/add> key.  
The virtual keyboard for inputting the preset will appear.  
` Refer to “Using Virtual Keyboard”. (Page 36)  
~
~
~
~
Save/Add : You can add and save the preset.  
Rename : You can change the settings of the existing presets.  
Delete : Deletes the selected preset.  
Delete All : Deletes all existing presets.  
` If you replace the camera of the channel that stores the preset list with a new one, you should reset the preset  
accordingly.  
M
ꢁ. Press <oK>.  
The preset will be saved as a name that you entered.  
camera setting  
A PTZ camera has its own menu system. Optimize the PTZ camera according to the DVR.  
Using the mouse may help easy setup.  
1. Connect the PTZ camera to the DVR and run the PTZ  
camera again to display the camera’s protocol setting  
SAMSUNG PROTOCOL  
ADDR  
TYPE RS-485,HALF  
BAUD 9600  
window.  
0
ꢀ. Check the protocol ID of the camera.  
` In “Device > Setting the PTZ”, enter the PTZ camera ID in the ID  
input box of the channel that is connected to the PTZ camera.  
(Page 42)  
LENS OK!  
TILT  
PAN  
OK!  
OK!  
ꢁ. Select <cam. setup> in the PTZ Control menu.  
The camera-specific menu appears.  
MAIN MENU  
**  
**  
`
`
You can configure the settings of only those cameras that support the  
protocols of Samsung and Panasonic.  
CAMERA SET...  
VIDEO SET...  
PRESET...  
If you are setting Auto Pan or Pattern in the camera menu, press and  
hold the appropriate button for a certain time so that the button  
operation can be different from that in normal PTZ setting.  
ZONE SET...  
Camera Setup  
OK  
AUTO SET...  
ALARM SET...  
OTHER SET...  
CLOCK SET...  
SYSTEM INFO...  
Exit  
English _ꢄꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 63  
2008-12-04 오전 10:16:02  
search & play  
search  
You can perform the search for recorded data by the time or by the  
search criteria such as an event.  
You can access the <search> menu directly in Live mode.  
Scene Mode   
SPOT OUT  
Audio Off  
Freeze  
Stop Alarm  
Record  
1. In Live mode, right-click any area of the screen.  
Play  
The Live menu appears.  
Search  
Backup  
Main Menu  
Shutdown  
Launcher hide  
Logout  
ꢀ. Select <search>.  
Or, press the [search] button on the remote control or  
the front panel.  
ꢁ. The Search menu appears.  
` If you have not checked “POS USE” in the “Main Menu > Device  
> POS Device” menu, the Search menu does not include the  
“POS Search” item. (Page 45)  
Return  
Time Search  
Event Search  
Backup Search  
POS Search  
ꢂ. The search can be restricted by the Auto Delete function.  
Refer to “setting the recording > record option”.  
(Page 50)  
Motion Search  
` Overlapped data : It only appears if there exists overlapped  
M
data on a certain time, produced due to the change of DVR’s  
time setup. The latest data comes first, from <List0>.  
It does not appear in <Backup Search>.  
time search  
You can search for recorded data of a desired time.  
As the time to display may be different depending on the time zone and the DST standard time, the time of  
data recorded in the same time can be displayed differently depending on time zone and DST settings.  
Using the mouse may help easy setup.  
ꢂ. Select <time search> in the <search> menu.  
Time Search  
2009-01-01  
Go to First  
Go to Last  
ꢃ. Select a date to search.  
Overlapped Data List0  
00:01:17  
Zoom In  
Duration  
Zoom Out  
` Refer to “Using the Calendar”. (Page 35)  
Channel  
CAM01  
CAM02  
CAM03  
CAM04  
CAM05  
CAM06  
CAM07  
CAM08  
CH ALL  
ꢄ. The record data on the specific date will be listed.  
The display bar is different according to the data type.  
So check the data type for the color in the left pane.  
2009/01/01 00:01:17  
Standard  
Motion  
Schedule  
Alarm  
Etc  
V.Loss  
ꢅ. Use direction buttons (▲▼_ +) to set the search criteria  
Previous/Next Page  
Play  
Cancel  
and press the [enter] button.  
~
~
~
Go to First : Moves to the earliest date.  
Go to Last : Moves to the most recent date.  
Time : Enter a time to perform the search or use the up/down button <>> to select one.  
ꢄꢂ_ search & play  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 64  
2008-12-04 오전 10:16:05  
~
~
Zoom Out : The map enlarges in detail.  
It will switch in the sequence of 24 hours-4 hours -1 hour -5  
minutes.  
Zoom In : The map will switch in the reverse order of the  
detailed mode above.  
Time Search  
Go to First  
Go to Last  
2009-01-01  
Overlapped Data List0  
Zoom In  
Duration  
Zoom Out  
00:01:17  
Channel  
CAM01  
CAM02  
CAM03  
CAM04  
CAM05  
CAM06  
CAM07  
CAM08  
CH ALL  
It will switch in the sequence of 5 minutes-1 hour -4 hours -  
24 hours.  
2009/01/01 00:01:17  
Standard  
Motion  
Schedule  
Alarm  
Etc  
V.Loss  
Previous/Next Page  
` Double-click a desired time to zoom it in/out.  
M
Play  
Cancel  
~
Preview : Click <channel> and select (click, drag) a time in  
<duration> to display a still image for the portion.  
- If the selected channel does not contain any recorded data, it will be marked black.  
ꢆ. Select a data item and click <play>.  
The screen switches to the data playback mode.  
event search  
You can search for events by the channel and play them.  
Using the mouse may help easy setup.  
ꢂ. Select <event search> in the <search> menu.  
Event Search  
ꢃ. Use direction buttons (▲▼_ +) to set the search criteria  
CAM 01  
2009-01-01  
and press the [enter] button.  
No.  
3
Date/Time Preview  
02:47:54 ~ 02:48:59  
00:39:06 ~ 00:40:30  
00:01:22 ~ 00:02:28  
Event  
Motion  
Motion  
Motion  
` All record events on a specific date will be found. (Normal/  
Schedule recording included)  
2
1
2009/01/01 00:01:22  
~
~
Date/Time Preview : If you select a data item in the list, the  
still image of the selected data will be displayed in the left  
preview pane.  
Previous/Next Page  
Play  
Cancel  
Event : Displays the type of the event that occurred.  
ꢄ. Select a data item and click <play>.  
The screen switches to the event data playback mode.  
Backup search  
Searches for backup data in the connected backup device.  
Only data in the format of DVR is included in the search.  
Refer to <Format> in “Backup>setting the Backup”. (Page 54)  
Using the mouse may help easy setup.  
ꢂ. Select <Backup search> in the <search> menu.  
Backup Search  
USB:USB2FlashStorage  
ꢃ. Use direction buttons (▲▼_ +) to set the search criteria  
No.  
1
Folder Name  
20090101  
File Name  
16190000  
and press the [enter] button.  
~
~
~
Record Period : Displays the record period.  
Channel : Displays the recorded channel.  
Play Start Time : Select a time that you start playing.  
Previous/Next Page  
File Name  
16190000  
Channel  
1
Record Period  
Play Start Time  
2009-01-01 01:01:01 - 2009-01-01 01:01:10  
ꢄ. Select a data item and click <play>.  
2009-01-01  
16:30:52  
Cancel  
The screen switches to the backup data playback mode.  
Play  
English _ꢄꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 65  
2008-12-04 오전 10:16:07  
search & play  
pos search  
You can search for data in the POS device that is connected to the DVR.  
You can use the mouse to select the related items.  
ꢂ. Select <pos search> in the <search> menu.  
POS Search  
Date/Time  
2007-12-25 03:41:18  
2009-01-01 03:41:18  
Case Sensitive  
Search  
Whole Word  
ꢃ. Use direction buttons (▲▼_ +) to set the search criteria  
Keyword  
and press the [enter] button.  
Go to First  
Go to Last  
POS  
CH  
1
Start Date/Time  
2009-01-01 03:41:15  
2009-01-01 03:41:15  
2009-01-01 03:41:10  
Keyword  
CHANGE _  
CASH _  
` You can enter specific text to refine your search.  
1
1
1
1
1
CASH _  
~
~
Keyword : Use the virtual keyboard to enter a keyword.  
Search Criteria :  
2009/01/01 03:41:15  
CHANGE  
5.95  
- <case sensitive>: If selected, search will be performed  
Previous/Next Page  
case-sensitively.  
Play  
Cancel  
- <whole word>: If selected, only the exact matches with  
the keyword will be found.  
~
~
Preview : Select a data item in the list to display the preview image.  
Information about the image will be displayed on the bottom of the screen.  
: You can use these buttons to accelerate your search if you have a huge list of search results.  
ꢄ. Select a data item and click <play>.  
The screen switches to the POS data playback mode.  
motion search  
If a motion is detected in each channel, you can set a desired area to perform the search.  
You can use the mouse to select the related items.  
ꢂ. Select <motion search> in the <search> menu.  
Motion Search  
Setup  
Channel  
CAM 01  
Motion Region  
All Area  
ꢃ. Use direction buttons (▲▼_ +) to set the search criteria  
Date/Time  
2009-01-01 03:41:18  
2009-01-01 05:11:44  
Search  
and press the [enter] button.  
No.  
Start Time  
` If you set the motion area to <Manual Area>, the <Setup>  
7
6
5
4
3
2
1
01:01:30  
01:01:25  
01:01:20  
01:01:15  
01:01:10  
01:01:05  
01:01:01  
button will be activated.  
2009/01/01 01:01:30  
~
Motion Region : Select an area to perform the search.  
- All Area : Searches for all areas of the selected channel.  
Previous/Next Page  
Play  
Cancel  
- Current Area : Searches for the motion area for each  
channel specified in “motion detection >  
setting the motion detection area”. (Page 52)  
- Manual Area : You can set the motion area manually.  
~
~
~
Setup : The Setup button will be activated only if you have  
set the motion area to Manual. Press this button to display  
the area setting window.  
Date/Time : The Date/Time will be automatically set by the  
hour, and the end time will be automatically set to one hour  
later than the start time if it is set.  
Select  
Unselect  
Inverse  
Menu  
Motion Region  
1 CH  
Individual  
Cancel  
Select All  
Preview : Select a data item in the list to display the still  
image of the item.  
OK  
ꢄ. Select a data item and click <play>.  
The screen switches to the motion data playback mode.  
ꢄꢄ_ search & play  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 66  
2008-12-04 오전 10:16:12  
pLayBacK  
play  
You can play data stored in the HDD and backup a desired portion of the data.  
Using the mouse may help easy setup.  
1. In Live mode, click <play> in the right-click menu or  
Scene Mode   
<
> in the launcher menu, or press the Play button on  
SPOT OUT  
Audio Off  
Freeze  
the remote control or the front panel.  
Stop Alarm  
Record  
ꢀ. Use the up/down button (▲▼) to select a menu.  
Play  
Search  
` For data search, refer to <Search>. (Page 64)  
Backup  
Main Menu  
Shutdown  
Launcher hide  
Logout  
PTZ  
Alarm  
Freeze  
ꢁ. Select a data item and click <play> in the Search menu.  
The selected data is played and the play launcher appears  
on the screen.  
` If there is an existing data, <Play> will start immediately without  
performing the search.  
~
: You can play up to 4 channels in real time.  
- In a split mode, the real time playback may not be  
supported, depending on the record quality, resolution  
and number of channels. And some frame rates may be  
supported.  
REC  
~
~
Playback Information : Displays the date and time of the current data in the top corner.  
Mode Switch : Select a desired play mode or press the [mode] button to switch the mode in the sequence  
of 1-split, 4-split, 9-split, 16-split and 13-split.  
` The grey area in the center of the 13-split mode plays the Live channel.  
The default channel of the Live mode is CH1, which can be changed later.  
~
~
~
~
: Switches to Live mode.  
REC  
: Records all channels in Live mode.  
Play Time : Displays the time and date of the current video.  
Play Bar : Displays the time of recorded data in the selected channel for the past 24 hours; the red gridline  
indicates the current play time.  
` Speed : Supports various speed options of x1, x2(-2), x4(-4), x8(-8), x16(-16), x32(-32) and x64(-64).  
` Slow : Supports slow speed options of x1/2(-1/2), x1/4(-1/4) and x1/8(-1/8).  
M
~
Backup : Click <  
> to set the current time to the start  
time of backup; you can specify a backup area using the  
mouse (yellow triangle).  
Backup Range  
Start  
End  
Click <  
> again to set the current time to the end time of  
2009-01-01 00:01:06  
2009-01-01 08:25:45  
the backup and the “Backup range” window appears.  
Device  
None  
Format  
DVR  
Folder  
\20090101\  
Filename 0001  
change  
- Format: Supports formats of DVR, AVI and SEC.  
Refer to a list of formats in “setting the Backup”.  
(Page 54)  
Backup  
Used  
Check capacity  
Free  
Backup  
Cancel  
- Device: Select a backup device.  
- Check Capacity : Enables you to check the capacity of the  
selected storage device.  
ꢂ. If you want to return to the Live screen in Play mode, click <  
] button on the remote control or the front panel.  
> in the launcher menu or press the  
[
@
English _ꢄꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 67  
2008-12-04 오전 10:16:16  
web viewer  
introducing weB viewer  
what is web viewer?  
Web Viewer allows remote access to your DVRs. You have  
access to live video, archived video, PTZ control (if configured),  
etc.  
product Features  
~
~
~
Remote access from a standard browser  
Supports PTZ camera controls  
Supports 1, 4, 8, 16 camera viewing formats (maximum of  
16 cameras in the list).  
~
~
Gets JPEG format images to print and save to “Print or Save  
JPEG format images”.  
Record video in AVI format—compatible with popular media players. (needed the Divx codec)  
system reQuirements  
The following lists the minimum suggested hardware and operating system requirements needed to run the  
Web Viewer.  
Windows XP Professional  
Windows 2000  
OS  
Windows Vista Home Basic /Premium  
Web Browser  
CPU  
Internet Explorer 6.0.2900.2180 or higher  
Intel Pentium 4.2 GHz  
MEMORY  
Monitor  
512 MB  
High Color 16-bit 1024 x 768  
50 MB(Installation space required)  
HDD  
* Additional HDD space required for recording.  
Recorded file size will vary depending on recording quality settings.  
ꢄꢆ_ web viewer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 68  
2008-12-04 오전 10:16:16  
connecting weB viewer  
1. Open your web browser and type the IP address or URL  
of DVR into the URL address box.  
The basic URL of the DVR is as following in case of MAC  
address:  
M
` 00-00-F0-ab-cd-ef : nabcdef.websamsung.net  
` 00-16-6c-ab-cd-ef : mabcdef.websamsung.net  
` 00-68-36-ab-cd-ef : pabcdef.websamsung.net  
` You can also use registered URL which setups up in the Setup menu of your DVR.  
ꢀ. Set the Admin ID and password same to those of the DVR  
Admin.  
For general users, enter the DVR user ID and password.  
` It allows up to 5 simultaneous access including the Admin  
and general users.  
M
` It does not allow multiple login of the Admin user.  
` Initial password of the Admin user is set to “4321”.  
` Password of the Admin and general users can be changed in <Permission Management> menu of the DVR.  
` All settings are applied by the DVR’s settings.  
ꢁ. Click <install activex control…>.  
ꢂ. Click <install>.  
English _ꢄ9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 69  
2008-12-04 오전 10:16:18  
web viewer  
ꢃ. Click <install>.  
ꢄ. You may have “windows security alert” that attempts to  
block this with the Windows Firewall. In that case, click  
<unblock> to start Web Viewer.  
ꢅ. Installation is complete.  
Now you can see the main screen of Live Viewer.  
ꢅ0_ web viewer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 70  
2008-12-04 오전 10:16:20  
using Live viewer  
The Live Viewer screen consists of following :  
This displays the IP address and the model name of the connected DVR.  
These menus consist of <Live>, <search>, <setup>, <aBout>.  
These buttons are used for the screen split and full screen mode.  
Shows the IP address and model name of the connected DVR.  
These buttons are used for sequence and changing the screen channel.  
These buttons are used for capture, print, and save the image.  
Shows the channel of the connected DVR.  
These buttons are used for PTZ related functions.  
This displays the screen for connected camera with DVR.  
` The resolution is set to 1024X768 pixels.  
M
` The initial split-screen mode is set according to the number of channels connected to DVR. You can change the  
split-screen mode by clicking buttons for split-screen modes.  
English _ꢅ1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 71  
2008-12-04 오전 10:16:21  
web viewer  
osd inFormation dispLay  
The channel number, video size, and IP address of the connected  
DVR are displayed.  
The current date and time of the DVR are displayed.  
Alarm icon appears when alarm is issued.  
It disappears when pressed the [aLarm] button of the DVR.  
Motion icon appears when motion is detected.  
It disappears when pressed the [aLarm] button of the DVR.  
It displays whether the PTZ controls are active.  
` If you have set PTZ cameras for the DVR, “PTZ” is displayed on the  
M
screen. Select a PTZ camera channel and use the [PTZ] button for  
camera control.  
spLit-screen  
You can change the split mode by clicking each number icon.  
SINGLE MODE  
Click < > button.  
QUAD MODE  
NINE MODE  
SIXTEEN MODE  
~
~
~
~
~
The screen displays the selected camera connected to the DVR in  
“singLe mode”.  
Click <  
> button.  
The screen displays the selected camera connected to the DVR in  
“Quad mode”.  
Click <  
> button.  
The screen displays the selected camera connected to the DVR in  
“nine mode”.  
Click <  
> button.  
The screen displays the selected camera connected to the DVR in  
“sixteen mode”.  
Click <  
> button.  
The screen displays the selected camera connected to the DVR in  
“FuLL screen mode”.  
Double clicking on the screen or pressing any button of the keyboard  
returns to the previous mode.  
ꢅꢀ_ web viewer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 72  
2008-12-04 오전 10:16:24  
connected dvr  
This displays the IP address and the status of the connecting DVR.  
` Connection failure message  
No Response : Appears when the DVR does not respond.  
M
Collision : Appears when Admin mode is already in use or simultaneous  
access to the same DVR from another PC.  
Access Denied : Appears when the maximum number of users is exceeded.  
` The number of simultaneous connections are limited to 5.  
changing the Live screen mode  
` 16-split mode does not support “SEQUENCE”, “PREVIOUS” and “NEXT”.  
~
seQuence: When this button is clicked, screens are switched at a  
preset interval. In SINGLE MODE, the channel numbers are sequentially  
switched from 1 to 16. In QUAD MODE, the screens are changed like 1st  
4 channels (1~4) 2nd 4 channels(5~8) 3rd 4 channels(9~12) 4th  
4 channels (13~16). In NINE MODE, the screens are changed from  
9 channels (1~9) to 7 channels (10~16). In SIXTEEN MODE, the screen  
refreshes at the preset interval  
` Preset interval (10 seconds)  
~
previous: When this button is clicked, the previous screen appears.  
In SINGLE MODE, the channel numbers are switched in reverse order.  
In QUAD MODE, the screens are changed like 1st 4 channels (1~4)   
2nd 4 channels (13~16) 3rd 4 channels (9~12) 4th 4 channels (5~8).  
In NINE MODE, the screens are changed from 9 channels (1~9) to  
7 channels (10~16). In SIXTEEN MODE, the screen is refreshed.  
English _ꢅꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 73  
2008-12-04 오전 10:16:26  
web viewer  
~
next: When this button is clicked, the next screen appears.  
In SINGLE MODE, the channel numbers are sequentially switched from 1 to 16.  
In QUAD MODE, the screens are changed like 1st 4 channels (1~4) 2nd 4 channels (5~8) 3rd  
4 channels (9~12) 4th 4 channels (13~16). In NINE MODE, the screens are changed from 9 channels  
(1~9) to 7 channels (10~16). In SIXTEEN MODE, the screen is refreshed.  
` If 16-channel DVR is connected, clicking “NEXT” in QUAD MODE is to change the screen as shown in the picture.  
(CH1 to CH4)  
(CH5 to CH8)  
(CH9 to CH12)  
(CH13 to CH16)  
16-channel DVR  
saving the Live screen on the pc  
~
capture: Saves the current screen into a BMP or JPEG  
file.  
` The default saving path is “C:\Program Files\Samsung\Dvr  
M
Web Viewer\SnapShot\Live”. To change the saving path, click  
<SAVE PATH (  
)> button and then select the path you  
want. For Windows Vista, the saving path is “C:\users\(user  
ID)\AppData\LocalLow\Samsung\DVR Web Viewer\Snapshot\”  
and it cannot be modified.  
` The file is automatically named as following: “IP address_  
Port number_YYMMDD_camera number_index”  
Ex) 192.168.130.12_554_20070615_101530_01_00  
~
print: Prints out the selected screen out of the currently  
displayed live screens. It also prints the IP address, time,  
camera number and the current event status together.  
ꢅꢂ_ web viewer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 74  
2008-12-04 오전 10:16:27  
~
record: Saves the current image on the screen and  
saves it as a avi video file.  
` To record it, it is required at least 1GB of available space.  
` The default saving path is “C:\Program Files\Samsung\Dvr  
Web Viewer\VideoClip\Live”. To change the saving path, click  
M
<SAVE PATH (  
)> button and then select the path you  
want. For Windows Vista, the saving path is “C:\users\(user  
ID)\AppData\Local-Low\Samsung\DVR Web Viewer\VideoClip\”  
and it cannot be modified.  
` The file is automatically named as following: “IP address_Port number_YYMMDD_camera number_index”  
Ex) 192.168.130.12_554_20070615_101530_01_00  
` For AVI Save, you need the DivX codec for playing saved files. You can download the free version of the Divx codec at  
http://sourceforge.net/projects/ffdshow/.  
` HDD Minimum Free Size : During the recording, if there is no more capacity available in the HDD than set free space  
will prompt with a popup message: “Cannot record due to insufficient disc space in the HDD”.  
changing the Live screen channeL  
~
Blue numbers : Indicates that the current channel is  
connected to a camera.  
~
Gray numbers : Indicates that the current channel is not  
connected to any camera.  
using ptZ camera  
Click the direction buttons to control the camera.  
Click the + or - buttons to zoom in or out the image displayed.  
English _ꢅꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 75  
2008-12-04 오전 10:16:29  
web viewer  
~
menu: Appears the camera menu screen.  
~
preset: Moves the lens direction to a preset direction.  
1. If you click a preset, the camera moves to the selected  
preset's position.  
ꢀ. You can delete the selected preset or all presets.  
ꢁ. You can save a new preset number and name.  
` You can save presets up to 20.  
M
~
~
~
autopan: Moves the camera lens direction between 2  
points set for the camera.  
scan: Moves the camera lens direction between 2 preset  
points of the camera.  
pattern: You can set camera various movement patterns  
such as zoom, move, etc. so that a camera automatically  
moves according to the pattern.  
` While the DVR controls a PTZ camera, Web Viewer cannot  
control the camera.  
M
` Camera menu setup is only available for camera supporting  
the function.  
` Each function of PTZ is same to that of the DVR.  
` Pan/Tilt of the Smart dome camera is manipulated  
automatically to center the camera to the mouse clicked  
point.  
` If you drag the mouse using the left button on a certain point,  
Pan/Tilt of the Smart dome camera is manipulated  
automatically to center the camera to the middle point between the dragging start and end position.  
Upward dragging will zoom out, while downward dragging will zoom in.  
` Tilt of Power PTZ operates properly within 45°.  
` Power and Pan Tilt functions are only available for camera supporting the functions.  
Ex: Samsung SCC-C6475  
ꢅꢄ_ web viewer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 76  
2008-12-04 오전 10:16:31  
using search viewer  
The Search Viewer screen consists of following:  
This displays the IP address and the model name of the connected DVR.  
These menus consist of <Live>, <search>, <setup>, <aBout>.  
These buttons are used for the screen split and full screen mode.  
Shows the IP address and model name of the connected DVR.  
These buttons are used for capture, print, and save the image.  
This displays a calendar at which you can search the recorded video.  
This displays a timeline at which you can search the recorded video by the time.  
These buttons are used for controlling playback.  
This displays the screen for playback of recorded video.  
` <SEQUENCE>, <PREVIOUS>, <NEXT> buttons are not available in SEARCH menu.  
M
English _ꢅꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 77  
2008-12-04 오전 10:16:32  
web viewer  
spLit-screen  
You can change the split mode by clicking each number icon.  
SINGLE MODE  
Click < > button.  
The screen displays the selected camera connected to the DVR in  
“singLe mode”.  
QUAD MODE  
~
~
Click <  
> button.  
The screen displays the selected camera connected to the DVR in  
“Quad mode”.  
` Only SINGLE and QUAD MODE are available in SEARCH menu.  
` If 16 channel DVR is connected, you can select a mode from SINGLE to  
SIXTEEN MODE.  
M
connected dvr  
This displays the IP address and the status of the connecting DVR.  
` Connection failure message  
No Response : Appears when the DVR does not respond.  
M
Collision : Appears when Admin mode is already in use or simultaneous  
access to the same DVR from the PC.  
Access Denied : Appears when the maximum number of users is exceeded.  
` The number of simultaneous connections are limited to 5.  
ꢅꢆ_ web viewer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 78  
2008-12-04 오전 10:16:34  
saving the Live screen on the pc  
~
capture: Saves the current screen into a BMP or JPEG  
file.  
` The default saving path is “C:\Program Files\Samsung\Dvr  
M
Web Viewer\SnapShot\Search”. To change the saving path,  
click <SAVE PATH (  
)> button and then select the path  
you want. For Windows Vista, the saving path is “C:\users\  
(user ID)\AppData\LocalLow\Samsung\DVR Web Viewer\  
Snapshot\”and it cannot be modified.  
` The file is automatically named as following: “IP address_Port number_YYMMDD_camera number_index”  
Ex) 192.168.130.12_554_20070615_101453_01_00  
~
print: Prints the playback screen that is now being  
displayed. It also prints IP address, time, camera number,  
and current event state.  
~
record: If you select a channel and click this button  
during playback (only play), the video data is saved in a DVR  
file. (It is saved in the designated folder on your PC.) To stop  
recording, click this button again.  
` To record it, it is required at least 1GB of available space.  
` The default saving path is “C:\Program Files\Samsung\Dvr  
Web Viewer\VideoClip\Search”. To change the saving path,  
M
click <SAVE PATH (  
)> button and then select the path you want. For Windows Vista, the saving path is  
“C:\users\(user ID)\AppData\LocalLow\Samsung\DVR Web Viewer\Video-Clip\” and it cannot be modified.  
` The file is automatically named as following: “IP address_Port number_YYMMDD_camera number_index”  
Ex) 192.168.130.12_554_20070615_101530_01_00  
` For AVI save, you need the DivX codec for playing saved files. You can download the free version of the Divx codec at  
http://sourceforge.net/projects/ffdshow/.  
English _ꢅ9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 79  
2008-12-04 오전 10:16:36  
web viewer  
searching the recorded video in the caLendar  
If the video data has been recorded on a date, the date is  
distinguished in green. If you click the date, the recorded video  
information is displayed in the time line. When you click  
<today>, it is changed to today’s date.  
searching the recorded video in the timeLine  
It displays the recorded video data status on the DVR after a date is  
selected. The normal mode displays the time ranging from 0 to 24 Hours  
while the extension mode displays the time every 2 hours.  
[Normal Mode]  
~
~
If you click < > button, it changes to the extension mode.  
Each time line represents 1 hour.  
[Extension Mode]  
~
~
If you click < > button, it changes to the normal mode.  
Each time line represents 5 minutes.  
` The channels are ranging from CH01 to CH16.  
M
ꢆ0_ web viewer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 80  
2008-12-04 오전 10:16:37  
controLLing pLayBacK  
Fast Backward: Reverse-plays faster(2x).  
reverse play: Performs Reverse Play.  
play: Performs playback.  
Fast Forward: Plays faster(2x).  
go to First: Moves the beginning time of recorded video in the time line.  
step Backward: Performs one step reverseplay by one frame.  
stop: Stops playing.  
step Forward: Performs one step forward by one frame.  
go to Last: Moves the last time of recorded video in the time line.  
viewer setup  
You can configure the DVR settings remotely on the network.  
To configure the DVR settings, click <setup>.  
system  
You can configure the various settings of the DVR system.  
date/time/Language  
For more information, refer to <date/time/Language> in the <system setup> menu. (Page 34)  
1. Select <date/time/Language> in the System menu.  
ꢀ. Configure the DVR settings according to your system  
environment.  
~
date/time  
Set the date and time.  
English _ꢆ1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 81  
2008-12-04 오전 10:16:39  
web viewer  
~
Time Synchronization Setup  
Set the time synchronization.  
~
display  
Date Format : Set the date type.  
Time : Select a time format to display on the screen.  
~
dst (daylight saving time)  
DST is displayed an hour ahead of the standard time of the  
time zone.  
~
Language  
Select a preferred language for the DVR.  
holiday  
You can set specific dates to Holidays according to your  
preferences.  
For more information, refer to <setting holiday> in the  
<system setup> menu. (Page 35)  
permission management  
For more information, refer to <permission management> in the <system setup> menu. (Page 36)  
~
administrator  
You can change the admin ID or the password.  
ꢆꢀ_ web viewer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 82  
2008-12-04 오전 10:16:41  
~
group  
Users are classified into groups and the permission can be  
set according to the group.  
` First of all, add a group.  
~
user  
You can add, change or remove a user or users.  
~
setup  
You can set the user permission.  
system management  
For more information, refer to <system management> in the <system setup> menu. (Page 38)  
~
system information  
You can see information of the current system.  
Check the software version, broadcast format and  
MAC address.  
English _ꢆꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 83  
2008-12-04 오전 10:16:43  
web viewer  
device  
You can check a list of devices that are connected to the DVR and configure the necessary settings.  
Click <device> in the menu screen.  
For more information, refer to <device setup>. (Page 41)  
camera  
~
camera  
You can configure the settings of the camera that is  
connected to the DVR.  
~
ptZ  
You can configure the settings of the PTZ camera that is  
connected to the DVR.  
Set the ID and protocol.  
storage device  
You can check and change the settings of the storage device.  
~
device  
You will see a list of storage devices that are connected to the  
DVR.  
You can check the type, used/total, usage and status of the  
device.  
ꢆꢂ_ web viewer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 84  
2008-12-04 오전 10:16:45  
~
hdd alarm  
You can set the alarm output channel and the alarm duration  
for an error.  
remote device  
You can see a list of remote devices including PTZ cameras  
and system keyboards that are connected to the RS-485 port  
of the DVR and configure the necessary settings.  
pos device  
You can set the channel, preset and communication port of  
the POS device that is connected to the DVR.  
monitor  
~
monitor  
You can configure the monitoring screen settings and set the  
output system.  
English _ꢆꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 85  
2008-12-04 오전 10:16:47  
web viewer  
~
SPOT OUT  
The registered user can view the event screen for the duration  
set in <event display time> if an event occurs from the  
appropriate channel.  
~
mode  
You can switch between live mode and play mode.  
record  
For more information, refer to <setting the recording>. (Page 48)  
recording schedule  
If you set a recording schedule for a specific date and time,  
the recording will start at that specific time.  
- Apply to All CH : Click <apply to all ch> to display the  
confirmation window.  
ꢆꢄ_ web viewer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 86  
2008-12-04 오전 10:16:49  
event record duration  
You can set the start and end times of recording that will be  
activated if an event occurs.  
rec Quality & resolution  
~
standard/event  
You can set the resolution, frame rate and recording quality for  
each channel.  
record option  
You can set the Disk End Mode.  
event  
For more information, refer to <setting the event>. (Page 51)  
sensor detection  
You can set the sensor operation mode and the synchronized  
camera as well as the alarm output type and the duration.  
English _ꢆꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 87  
2008-12-04 오전 10:16:51  
web viewer  
motion detection  
You can set the motion detection mode and the sensitivity  
as well as the alarm output type and the duration.  
~
motion area  
Set the target motion detection area  
video Loss detection  
You can set the alarm output time if a video loss occurs.  
alarm schedule  
You can schedule the alarm output according to the day of  
the week and the time.  
The default setting is Event Sync, which activates the alarm  
only if an event occurs.  
ꢆꢆ_ web viewer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 88  
2008-12-04 오전 10:16:54  
network  
For more information, refer to <network configuration>. (Page 55)  
connection  
A remote user can access the DVR via the network to check  
the current mode and the IP address.  
~
connection  
You can set the network connection route.  
~
protocol  
You can configure the protocol related settings.  
ddns  
You can check the DDNS settings.  
Live transfer  
A remote user can set the images of the DVR.  
~
Live transfer  
A remote user can set the image resolution of the transferred  
data.  
English _ꢆ9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 89  
2008-12-04 오전 10:16:56  
web viewer  
mailing service  
You can specify the SMTP server that sends a mail if an event occurs and set the recipient group and users.  
~
smtp  
You can set the server that sends mails and specify if you use  
the authentication process.  
~
event  
You can set the event interval and specify which events the  
server sends mails for.  
~
group  
You can add a group to receive the mail if an event occurs  
and set the permission to receive the event mail for each  
group.  
~
recipient  
You can add a user or users who will receive the mail.  
90_ web viewer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 90  
2008-12-04 오전 10:16:58  
aBout  
Click <aBout>.  
Displays the model name of connected DVR and the version  
of Web Viewer.  
English _91  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 91  
2008-12-04 오전 10:16:58  
backup viewer  
sec BacKup viewer  
You can play a file that is backed up in the format of SEC.  
Backup in the format of SEC will involve in generating two files: one for the backup data and one for the viewer.  
If you run the backup file viewer, the backup data file will be automatically played.  
recommended system requirements  
PCs with a lower specification than the recommended below may not fully support forward/backward and  
high-speed playback.  
~
~
~
~
OS : Windows XP professional, Windows Vista  
CPU : Intel Core2-Duo 2.4GHz or higher  
RAM : DDR PC-3200 1G or more  
VGA : Geforce 6200 or higher  
9ꢀ_ backup viewer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 92  
2008-12-04 오전 10:17:00  
Name  
Description  
A toggle button. Each time you press this button, the audio output will toggle  
between activated and deactivated.  
/
Audio  
You can adjust the volume level from 0 to 100.  
Saves the current screen as an image file. Supported file formats include  
BMP and JPEG.  
Screen Printout  
Prints out the current screen. You should have installed the appropriate printer  
driver before you can print out the screen.  
A toggle button. Each time you press this button, it will toggle between  
activated and deactivated. The closed lock icon indicates activation of the file  
tamper detection, which will blink the screen three times and stop playing if  
an unauthorized manipulation of a data file is detected.  
File Tamper  
Detection  
/
Collapses the time range that is displayed on the range bar of the storage  
time. You can collapse the range bar until the overall range is shortened to 24  
hours.  
Zoom In/Out  
Enlarges the time range that is displayed on the range bar of the storage  
time. You can enlarge the range bar until the overall range is extended to 1  
minute.  
Displays the time range of a stored video file.  
You can move the gridline of the range bar to select a time point to play.  
Display of storage time range  
A toggle button. Each time you press this button, it will change the button  
color and toggle the slow playback between deactivated and activated. If  
deactivated, you can use the speed bar to adjust the playback speed from x-  
16 to x16.  
A toggle button. Each time you press this button, it will change the button  
color and toggle the speed adjustment between activated and deactivated.  
If activated, the adjusted speed will be kept even if you release the mouse on  
the speed bar. If deactivated, the adjusted speed will be applied only while  
you use the mouse to hold the adjusted speed, and if you release the mouse,  
the speed will restore to x1.  
Speed  
You can adjust the speed from x-16 to x16, which varies according to the  
frame rate of the source.  
If the frame rate is high, the speed will be limited to a max of x4, and if low,  
the speed will be limited to a max of x16.  
Displays the next frame. This is available only if the playback is stopped.  
A toggle button. Press it once to start playing the video and switch the button  
mode to 'Pause', and press it again to switch the button mode to Play and  
stop playing temporarily.  
Play  
Displays the previous frame. This is available only if the playback is stopped.  
English _9ꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 93  
2008-12-04 오전 10:17:01  
appendix  
product speciFication  
Item  
Details  
Note  
Operating System  
Broadcast Format  
Embedded OS  
NTSC/PAL System  
AC 100~230V (PAL)  
AC 110~220V (NTSC)  
Input Voltage  
SHR-816x : 60W  
SHR-808x : 56W  
SHR-7xxx : 55W  
Power Consumption  
Composite 16(8) Channel  
- 1.0Vp-p  
- 75Ω Hi Z Termination  
BNC Type  
Video In  
Loop Through Out 16(8) Channel  
- Auto Termination  
Composite 5 Channel(SHR-816x)  
3 Channel(SHR-808x)  
2 Channel(SHR-7xxx)  
Video  
- Normal Video Output 1 Channel  
- SPOT OUTPUT 4 (SHR-816x), 2 (SHR-808x)  
1 (SHR-7xxx)  
Video Out  
- BNC Type  
VGA 1 Channel  
HDMI 1 Channel  
Mono 16(8) Channel  
- 5dBm, 600Ω  
4 Channel : RCA Type  
Audio In  
12 Channel : d-sub Accessory (Optional)  
Audio  
Mono 1 Channel  
- 6dBm  
Audio Out  
RCA Type  
NTSC  
PAL  
Resolution  
704x480  
704x576  
Resolution & Frame  
Rate  
480ips(16Ch)/  
240ips(8Ch)  
400ips(16Ch)/  
200ips(8Ch)  
Frame Rate  
Single  
Split Modes:  
Live Screen  
16CH : 4-,6-,8-,9-,13-,16- splits  
8CH : 4-,6-,8-,9- splits  
PIP  
Display Mode  
Mode sequence  
Freeze  
2 X Zoom  
9ꢂ_ appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 94  
2008-12-04 오전 10:17:01  
Item  
Compression  
Details  
Note  
Video : MPEG4  
Audio : G.723  
Method  
Resolution  
Spec. (Quality)  
Max Recording Rate  
CIF(S)  
352X240(NTSC)  
/352X288(PAL)  
Level8 (high)  
~ Level1 (low)  
480(240)ips(NTSC)/  
400(200)ips(PAL)  
SHR-716x  
(SHR-708x)  
Half D1(M)  
704x240(NTSC)  
/704x288(PAL)  
Level8 (high)  
~ Level1 (low)  
240(120)ips(NTSC)/  
200(100)ips(PAL)  
SHR-716x  
(SHR-708x)  
Resolution & Quality  
Full D1(L)  
704x480(NTSC)  
/704x576(PAL)  
Level8 (high)  
~ Level1 (low)  
120(60)ips(NTSC)/  
100(50)ips(PAL)  
SHR-716x  
(SHR-708x)  
Record  
CIF(S)  
Level8 (high)  
~ Level1 (low)  
480(240)ips(NTSC)/  
400(200)ips(PAL)  
SHR-816x  
(SHR-808x)  
/Half D1(M)  
/Full D1(L)  
Normal Recording REC button  
Scheduled Recording Schedule Table  
Event Recording  
Record Mode  
- Alarm Detection  
- Motion Detection  
- Video Loss  
- Pre & Post Recording  
NTSC : 0.9, 1.9, 3.8, 7.5, 15, 30ips  
PAL : 0.8, 1.6, 3.1, 6.2, 12.5, 25ips  
Frame Rate  
Internal  
SHR-8162/8082/7162/7082 : SATA HDDx5(MAX)  
MAX HDD size : 500GB x 5 = 2.5TB  
SHR-8160/8080/7160/7080 : SATA HDDx6(MAX)  
MAX HDD size : 500GB x 6 = 3.0TB  
USB HDD  
Storage  
- MAX 1 (USB hub not supported)  
- MAX HDD Size : 500GB  
SATA HDD  
External  
- 2 Port  
- MAX 1HDD/port  
- MAX HDD Size : 500GB  
Calendar Search  
Event Search  
- Alarm,Motion,Video Loss  
Time/Date Search  
Go to First  
Search Mode  
Go to Last  
Backup Search  
Text Search(for POS)  
Motion Search  
Preview  
Play  
Total  
480/400ips  
(CIF(S))  
Resolution  
CIF(S)  
Specification  
480ips(NTSC)/400ips(PAL)  
Resolution &  
Specification  
240/200ips  
(Half D1(M))  
120/100ips  
(Full D1(L))  
Half D1(M)  
Full D1(L)  
240ips(NTSC)/200ips(PAL)  
120ips(NTSC)/100ips(PAL)  
English _9ꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 95  
2008-12-04 오전 10:17:01  
appendix  
Item  
Details  
Note  
Display Mode  
Single /4-/9-/13-/16-splits  
Play  
Play,Pause,Stop,2xDigital Zoom  
Fast Forward/Fast Reverse  
- 2x, 4x, 8x,16x, 32x, 64x  
Play Mode  
USB External HDD  
USB CD/DVD Writer,Internal DVD(SHR-7082,7162,8082,8162 only)  
USB Memory  
Backup  
USB HDD-MAX 1(USB hub not supported)  
SATA HDD-MAX 1  
Network  
Ethernet : 10/100/1000 BaseT,ADSL(PPPoE),DHCP  
RS-485 PTZ Device Control  
Remote Control Device  
RS-232C POS  
Serial Communication  
Input : SHR-816x/716x : 16 channels  
SHR-808x/708x : 8 channels  
Alarm  
CPU : Intel Core 2 Quad 2.5GHz or higher  
RAM : 2G  
VGA : 32M RAM(64M or more)  
Direct 8.1  
PC Requirements  
Windows XP(Pro),  
Windows-2000(Pro)  
Windows Vista(Home Basic/Premium)  
Remote Viewer  
Operating  
Systems  
Live Image Monitoring Mode  
Local File Search & Play Back Mode  
Remote File Search & Play Back Mode  
Features  
Temperature (Operation)  
Temperature (Storage)  
Humidity (Operation)  
Humidity (Storage)  
0°C ~ 40°C (32°F ~ 104°F)  
-20°C ~ 60°C (-4°F ~ 140°F)  
20% to 85% RH  
20% to 85% RH  
Dimension (W x H x D)  
440 x 88 x 430mm (17.32 x 3.46 x 16.92 inch)  
SHR-8162/7162 : ~7.55Kg(16.64lb)  
SHR-8082/7082 : ~7.42Kg(16.35lb)  
SHR-8160/7160 : ~6.70kg(14.77lb)  
SHR-8080/7080 : ~6.57Kg(14.48lb)  
Weight  
It needs extra H/W to support ATM/POS function. So please contact your vendor to obtain H/W.  
9ꢄ_ appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 96  
2008-12-04 오전 10:17:02  
product overview  
~
shr-8162  
English _9ꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 97  
2008-12-04 오전 10:17:18  
appendix  
deFauLt setting  
This returns the factory default settings.  
The settings are made as follows;  
~
~
Use System/Load Factory Default in MENU  
In Live mode, press and hold down [mode] and then [ptZ] on the front panel for 6 seconds to reset the settings.  
Category  
Details  
Factory Default  
Date  
Time Format  
Time Zone  
Time Synchronize  
DST  
YYYY-MM-DD  
24 hours  
GMT  
Date/Time/Language  
Date/Time/Language  
OFF  
OFF  
English  
admin  
System Settings  
Language  
ID  
Admin  
New Password  
Restricted Access  
Auto Logout  
Broadcast Format  
Video  
4321  
Permission  
Management  
All  
Setting  
3 Min  
System Management  
System Information  
NTSC/PAL  
ON  
Audio  
OFF  
Camera  
CH Name  
CAM 01 ~ CAM 16  
SEQ-Dwell Time  
5sec  
Camera  
ID  
Protocol  
Camera No.  
None  
50  
PTZ  
Brightness  
Screen Setup  
Contrast  
50  
Color  
50  
Check Alarm Output Port  
Duration  
OFF  
Device  
OFF  
Storage Device  
Remote Device  
HDD Alarm  
Replace Alarm Output Port  
Duration  
OFF  
OFF  
Baudrate  
Parity  
9600  
None  
8
Data  
Stop bit  
1
Transfer Type  
System Keyboard  
Remote Control  
Half Duplex  
OFF  
ON(0)  
9ꢆ_ appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 98  
2008-12-04 오전 10:17:45  
Category  
Details  
Factory Default  
POS Device  
OFF  
All  
Display  
Switch to Split Screen  
VGA  
5 sec  
Monitor  
800x600  
480p  
HDMI  
SPOT OUT 1  
SPOT OUT 2  
SPOT OUT 3  
SPOT OUT 4  
Event Display  
Live Mode  
CH1 ~ CH4  
CH5 ~ CH8  
CH9 ~ CH12  
CH13 ~ CH16  
OFF  
Device  
Monitor  
SPOT OUT  
Mode  
ALL  
Play Mode  
ALL  
Recording Schedule  
Channel 1  
PRE Event  
POST Event  
Event  
OFF  
Event Record  
Duration  
1 min  
Resolution  
Frame Rate  
Record Quality  
Resolution  
CIF(S)  
Normal Recording  
Event  
7.5 ips  
Level 4  
Full D1(L)  
30 ips  
Level 4  
Overwrite  
OFF  
Quality/Resolution  
Record Option  
Frame Rate  
Record Quality  
Setup  
Disk End Mode  
Auto Delete  
Disk End Beep  
OFF  
Recording  
Sensor Operation  
Camera  
OFF  
Camera No.  
None  
Sensor Detection  
Motion Detection  
Alarm  
Duration  
Mode  
10 sec  
OFF  
Sensitivity  
Alarm  
Very High  
None  
Event  
Duration  
10 sec  
All Area  
OFF  
Motion Region  
Video Loss State  
Alarm  
Video Loss Detection  
None  
Duration  
10 sec  
English _99  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 99  
2008-12-04 오전 10:17:45  
appendix  
Category  
Details  
Factory Default  
Connection Mode  
Bandwidth  
IP  
Static IP  
2Mbps  
192.168.1.200  
192.168.1.1  
255.255.255.0  
168.126.63.1  
TCP  
Connection  
Gateway  
Connection Mode  
Subnet Mask  
DNS  
Protocol Type  
Port (TCP)  
Webviewer Port  
Protocol  
554~557  
80  
DDNS  
DDNS Site  
Resolution  
Quality  
OFF  
Network  
CIF(S)  
Live Transfer  
Low  
Server  
Port  
OFF  
11  
SMTP  
Use Authentication  
Secure Transfer  
Group  
OFF  
Never/TLS  
OFF  
Mailing Service  
Group  
Event  
Recipient Permission  
Event Interval  
Use Event Transfer  
OFF  
10 min  
OFF  
100_ appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 100  
2008-12-04 오전 10:17:46  
trouBLeshooting  
Symptom  
Countermeasures  
The system does not turn on and the indicator on the Check if the power supply system is properly connected.  
front panel does not work at all.  
Check the system for the input voltage from the power source.  
If the problem persists even after you have taken the above actions,  
check the power supplier and replace it with a new one if neccessary.  
Some channels display just a black screen even if  
they receive video sources.  
Check if the camera connected to the system properly displays the  
image. Sometimes, this problem may occur on a camera that is not  
properly connected to the video source.  
Check if the camera is properly supplied with power.  
Sometimes, this problem may occur on a channel with weak video  
signal from a video distributor that is connected to multiple systems. In  
this case, input the video source of the camera directly into the DVR.  
This may find the cause and solve the problem.  
If I press the [REC] button on the front panel, the  
REC indicator does not flash, nor the player start  
recording.  
Check if there is a free space on the HDD for the recording.  
Check if the record mode is set to ON in the record mode setting.  
The screen displays the logo image repeatedly.  
This may occur from a problem with the main board, or the related  
software is corrupt.  
Contact the nearest service center for more information.  
The Channel button does not work on the Live  
screen.  
The Channel button does not work if the current screen is in the event  
monitoring mode.  
In the event monitoring screen, press the [ALARM] button to exit the  
screen and select a channel.  
The cursor will not move to the Start button when I  
start the calendar search.  
Check if the channel and the date that you want to play are marked with  
the V symbol.  
Both channel and date should be checked before you can start playing  
with the Start button.  
When the alarm sounds, I press the [ALARM] button  
on the front panel to release the alarm but it does  
not work. The alarm persists and I could not set it off  
in any way.  
Press the [MENU] button on the front panel to release the alarm in the  
following way:  
1) To release the event monitoring mode : Monitoring Mode – set the  
duration of the event monitoring to Off.  
2) To release the alarm sound : Event Record Mode - Alarm (Motion  
Detection/Video Loss) – deactivate the alarm sound.  
3) To release the event : Event Record Mode - Alarm (Motion Detection/  
Video Loss) – set the mode to Off.  
No response is made even if I press the [PTZ] button Menu Camera Check if the current protocols and other settings in  
on the Live screen.  
the PTZ device are properly configured according to the PTZ camera.  
I've found that the DVR does not recognize as many  
disks as installed when I have connected multiple  
external HDDs to the DVR.  
It takes time for the DVR to recognize multiple external HDDs. Try again  
in a moment and if the problem (of failure to recognize as many HDDs  
as connected) persists, it may occur due to a mechanical error of the  
HDD installed. Try again with a different HDD.  
English _101  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 101  
2008-12-04 오전 10:17:46  
appendix  
Symptom  
Countermeasures  
A message of “Need to reset date/time.” Is displayed  
on the screen.  
This message is displayed if there occurs a problem with the time  
setting of the internal clock or an error in the clock itself. Contact the  
retailer or the service center for more information.  
The time bar is not displayed in Search mode.  
The timeline can switch between normal and extension mode.  
In extension mode, the time bar may not be displayed in the current  
timeline. Switch to normal mode or use the left or right button to  
navigate through the time bar.  
The “NO HDD” icon and an error message are  
displayed.  
Check the HDD for connection. If the problem persists in a normal  
condition, contact the nearest service center to have the HDD checked  
by the service personnel.  
I have installed an additional HDD on the DVR but it  
does not recognize the HDD.  
See the compatibilty list to check if the additional HDD is supported by  
the DVR. For the compatibility list, contact the retailer where you  
purchased the DVR.  
I have connected an external storage device (external  
SATA HDD) to the DVR but the DVR seems not to  
recognize it.  
See the compatibility list of external storage devices to check if the  
connected device is supported by the DVR.  
For the compatibility list, contact the retailer where you purchased the  
DVR.  
If I press the ESC key in full screen mode of the  
WebViewer, the system does not switch to a normal  
split mode.  
Press the ALT+TAB keys to select ‘ACTIVE MOVIE’ and press the ESC  
key again. The system will switch to a normal split mode.  
10ꢀ_ appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 102  
2008-12-04 오전 10:17:46  
open source License report on the product  
This product uses software provided under the name of GPL and LGPL. You can receive the following GPL  
and LGPL source codes by email request to www.sec.co.kr.  
GPL Software : linux kernel, Sysvinit, dosfstols, wget, msmtp, busybox, cdrtools, dvd+rw-tools, iconv,  
smartctl, uboot, minicom, openssl, bash, lm_sensors  
LGPL Software : glibc, vmstat, inetutils  
OpenSSL License : OpenSSL  
We protect your rights with two steps:  
gnu generaL puBLic License  
(1) copyright the software, and (2) offer you  
this license which gives you legal permission to  
copy, distribute and/or modify the software.  
Version 2, June 1991  
Copyright (C) 1989, 1991 Free Software  
Foundation, Inc.  
51 Franklin Street, Fifth Floor, Boston, MA  
02110-1301, USA  
Also, for each author’s protection and ours, we  
want to make certain that everyone understands  
that there is no warranty for this free software. If  
the software is modified by someone else and  
passed on, we want its recipients to know that  
what they have is not the original, so that any  
problems introduced by others will not reflect on  
the original authors’ reputations.  
Everyone is permitted to copy and distribute  
verbatim copies of this license document, but  
changing it is not allowed.  
Finally, any free program is threatened constantly  
by software patents. We wish to avoid the  
danger that redistributors of a free program  
will individually obtain patent licenses, in effect  
making the program proprietary. To prevent this,  
we have made it clear that any patent must be  
licensed for everyone’s free use or not licensed  
at all.  
preamble  
The licenses for most software are designed  
to take away your freedom to share and  
change it. By contrast, the GNU General Public  
License is intended to guarantee your freedom  
to share and change free software to make  
sure the software is free for all its users. This  
General Public License applies to most of the  
Free Software Foundation’s software and to  
any other program whose authors commit to  
using it. (Some other Free Software Foundation  
software is covered by the GNU Lesser General  
Public License instead.) You can apply it to your  
programs, too.  
The precise terms and conditions for copying,  
distribution and modification follow.  
terms and conditions For  
copying, distriBution and  
modiFication  
When we speak of free software, we are  
Version 2, June 1991  
Copyright (C) 1989, 1991 Free Software  
Foundation, Inc.  
referring to freedom, not price. Our General  
Public Licenses are designed to make sure that  
you have the freedom to distribute copies of free  
software (and charge for this service if you wish),  
that you receive source code or can get it if you  
want it, that you can change the software or use  
pieces of it in new free programs; and that you  
know you can do these things.  
51 Franklin S  
0. This License applies to any program or other  
work which contains a notice placed by the  
copyright holder saying it may be distributed  
under the terms of this General Public License.  
The “Program”, below, refers to any such  
program or work, and a “work based on the  
Program” means either the Program or any  
derivative work under copyright law: that is to  
say, a work containing the Program or a portion  
of it, either verbatim or with modifications and/or  
translated into another language. (Hereinafter,  
translation is included without limitation in the  
term “modification”.) Each licensee is addressed  
as “you”.  
To protect your rights, we need to make  
restrictions that forbid anyone to deny you  
these rights or to ask you to surrender the  
rights. These restrictions translate to certain  
responsibilities for you if you distribute copies of  
the software, or if you modify it.  
For example, if you distribute copies of such a  
program, whether gratis or for a fee, you must  
give the recipients all the rights that you have.  
You must make sure that they, too, receive or  
can get the source code. And you must show  
them these terms so they know their rights.  
Activities other than copying, distribution and  
modification are not covered by this License;  
they are outside its scope. The act of running the  
English _10ꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 103  
2008-12-04 오전 10:17:46  
Program is not restricted, and the output from the  
Program is covered only if its contents constitute a  
work based on the Program (independent of having  
been made by running the Program). Whether that  
is true depends on what the Program does.  
rights or contest your rights to work written entirely  
by you; rather, the intent is to exercise the right to  
control the distribution of derivative or collective  
works based on the Program.  
In addition, mere aggregation of another work not  
based on the Program with the Program (or with  
a work based on the Program) on a volume of a  
storage or distribution medium does not bring the  
other work under the scope of this License.  
3. You may copy and distribute the Program (or a  
work based on it, under Section 2) in object code  
or executable form under the terms of Sections 1  
and 2 above provided that you also do one of the  
following:  
a) Accompany it with the complete corresponding  
machine-readable source code, which must  
be distributed under the terms of Sections 1  
and 2 above on a medium customarily used for  
software interchange; or,  
1. You may copy and distribute verbatim copies  
of the Program’s source code as you receive it, in  
any medium, provided that you conspicuously and  
appropriately publish on each copy an appropriate  
copyright notice and disclaimer of warranty; keep  
intact all the notices that refer to this License and  
to the absence of any warranty; and give any other  
recipients of the Program a copy of this License  
along with the Program.  
You may charge a fee for the physical act of  
transferring a copy, and you may at your option offer  
warranty protection in exchange for a fee.  
ꢀ. You may modify your copy or copies of the  
Program or any portion of it, thus forming a work  
based on the Program, and copy and distribute  
such modifications or work under the terms of  
Section 1 above, provided that you also meet all of  
these conditions:  
a) You must cause the modified files to carry  
prominent notices stating that you changed the  
files and the date of any change.  
b)You must cause any work that you distribute or  
publish, that in whole or in part contains or is  
derived from the Program or any part thereof,  
to be licensed as a whole at no charge to all  
third parties under the terms of this License.  
c) If the modified program normally reads  
commands interactively when run, you must  
cause it, when started running for such  
interactive use in the most ordinary way, to  
print or display an announcement including  
an appropriate copyright notice and a notice  
that there is no warranty (or else, saying  
that you provide a warranty) and that users  
may redistribute the program under these  
conditions, and telling the user how to view a  
copy of this License. (Exception: if the Program  
itself is interactive but does not normally print  
such an announcement, your work based  
on the Program is not required to print an  
announcement.)  
These requirements apply to the modified work as  
a whole. If identifiable sections of that work are not  
derived from the Program, and can be reasonably  
considered independent and separate works in  
themselves, then this License, and its terms, do not  
apply to those sections when you distribute them as  
separate works. But when you distribute the same  
sections as part of a whole which is a work based  
on the Program, the distribution of the whole must  
be on the terms of this License, whose permissions  
for other licensees extend to the entire whole, and  
thus to each and every part regardless of who wrote  
it.  
b)Accompany it with a written offer, valid for at  
least three years, to give any third party, for a  
charge no more than your cost of physically  
performing source distribution, a complete  
machine-readable copy of the corresponding  
source code, to be distributed under the  
terms of Sections 1 and 2 above on a medium  
customarily used for software interchange; or,  
c) Accompany it with the information you received  
as to the offer to distribute corresponding  
source code. (This alternative is allowed only  
for noncommercial distribution and only if  
you received the program in object code or  
executable form with such an offer, in accord  
with Subsection b above.)  
The source code for a work means the preferred  
form of the work for making modifications to it. For  
an executable work, complete source code means  
all the source code for all modules it contains, plus  
any associated interface definition files, plus the  
scripts used to control compilation and installation  
of the executable. However, as a special exception,  
the source code distributed need not include  
anything that is normally distributed (in either source  
or binary form) with the major components (compiler,  
kernel, and so on) of the operating system on which  
the executable runs, unless that component itself  
accompanies the executable.  
If distribution of executable or object code is made  
by offering access to copy from a designated place,  
then offering equivalent access to copy the source  
code from the same place counts as distribution of  
the source code, even though third parties are not  
compelled to copy the source along with the object  
code.  
ꢂ. You may not copy, modify, sublicense, or  
distribute the Program except as expressly provided  
under this License. Any attempt otherwise to copy,  
modify, sublicense or distribute the Program is void,  
and will automatically terminate your rights under  
this License. However, parties who have received  
copies, or rights, from you under this License will  
Thus, it is not the intent of this section to claim  
10ꢂ_ appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 104  
2008-12-04 오전 10:17:46  
not have their licenses terminated so long as such  
parties remain in full compliance.  
ꢆ. If the distribution and/or use of the Program is  
restricted in certain countries either by patents or by  
copyrighted interfaces, the original copyright holder  
who places the Program under this License may  
add an explicit geographical distribution limitation  
excluding those countries, so that distribution is  
permitted only in or among countries not thus  
excluded. In such case, this License incorporates  
the limitation as if written in the body of this License.  
ꢃ. You are not required to accept this License,  
since you have not signed it. However, nothing else  
grants you permission to modify or distribute the  
Program or its derivative works. These actions are  
prohibited by law if you do not accept this License.  
Therefore, by modifying or distributing the Program  
(or any work based on the Program), you indicate  
your acceptance of this License to do so, and all  
its terms and conditions for copying, distributing or  
modifying the Program or works based on it.  
9. The Free Software Foundation may publish  
revised and/or new versions of the General Public  
License from time to time. Such new versions will be  
similar in spirit to the present version, but may differ  
in detail to address new problems or concerns.  
Each version is given a distinguishing version  
number. If the Program specifies a version number  
of this License which applies to it and “any later  
version”, you have the option of following the terms  
and conditions either of that version or of any later  
version published by the Free Software Foundation.  
If the Program does not specify a version number  
of this License, you may choose any version ever  
published by the Free Software Foundation.  
ꢄ. Each time you redistribute the Program (or  
any work based on the Program), the recipient  
automatically receives a license from the original  
licensor to copy, distribute or modify the Program  
subject to these terms and conditions. You may not  
impose any further restrictions on the recipients’  
exercise of the rights granted herein. You are not  
responsible for enforcing compliance by third parties  
to this License.  
ꢅ. If, as a consequence of a court judgment or  
allegation of patent infringement or for any other  
reason (not limited to patent issues), conditions are  
imposed on you (whether by court order, agreement  
or otherwise) that contradict the conditions of this  
License, they do not excuse you from the conditions  
of this License. If you cannot distribute so as to  
satisfy simultaneously your obligations under this  
License and any other pertinent obligations, then as  
a consequence you may not distribute the Program  
at all. For example, if a patent license would not  
permit royalty-free redistribution of the Program by  
all those who receive copies directly or indirectly  
through you, then the only way you could satisfy  
both it and this License would be to refrain entirely  
from distribution of the Program.  
10. If you wish to incorporate parts of the Program  
into other free programs whose distribution  
conditions are different, write to the author to ask  
for permission. For software which is copyrighted  
by the Free Software Foundation, write to the  
Free Software Foundation; we sometimes make  
exceptions for this. Our decision will be guided by  
the two goals of preserving the free status of all  
derivatives of our free software and of promoting the  
sharing and reuse of software generally.  
no warranty  
11. BECAUSE THE PROGRAM IS LICENSED FREE  
OF CHARGE, THERE IS NO WARRANTY FOR  
THE PROGRAM, TO THE EXTENT PERMITTED BY  
APPLICABLE LAW. EXCEPT WHEN OTHERWISE  
STATED IN WRITING THE COPYRIGHT HOLDERS  
AND/OR OTHER PARTIES PROVIDE THE  
If any portion of this section is held invalid or  
unenforceable under any particular circumstance,  
the balance of the section is intended to apply and  
the section as a whole is intended to apply in other  
circumstances.  
PROGRAM “AS IS” WITHOUT WARRANTY OF  
ANY KIND, EITHER EXPRESSED OR IMPLIED,  
INCLUDING, BUT NOT LIMITED TO, THE  
IMPLIED WARRANTIES OF MERCHANTABILITY  
AND FITNESS FOR A PARTICULAR PURPOSE.  
THE ENTIRE RISK AS TO THE QUALITY AND  
PERFORMANCE OF THE PROGRAM IS WITH YOU.  
SHOULD THE PROGRAM PROVE DEFECTIVE,  
YOU ASSUME THE COST OF ALL NECESSARY  
SERVICING, REPAIR OR CORRECTION.  
It is not the purpose of this section to induce you to  
infringe any patents or other property right claims or  
to contest validity of any such claims; this section  
has the sole purpose of protecting the integrity  
of the free software distribution system, which is  
implemented by public license practices. Many  
people have made generous contributions to the  
wide range of software distributed through that  
system in reliance on consistent application of that  
system; it is up to the author/donor to decide if he  
or she is willing to distribute software through any  
other system and a licensee cannot impose that  
choice.  
1ꢀ. IN NO EVENT UNLESS REQUIRED BY  
APPLICABLE LAW OR AGREED TO IN WRITING  
WILL ANY COPYRIGHT HOLDER, OR ANY  
OTHER PARTY WHO MAY MODIFY AND/OR  
REDISTRIBUTE THE PROGRAM AS PERMITTED  
ABOVE, BE LIABLE TO YOU FOR DAMAGES,  
INCLUDING ANY GENERAL, SPECIAL,  
This section is intended to make thoroughly clear  
what is believed to be a consequence of the rest of  
this License.  
English _10ꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 105  
2008-12-04 오전 10:17:47  
INCIDENTAL OR CONSEQUENTIAL DAMAGES  
ARISING OUT OF THE USE OR INABILITY TO USE  
THE PROGRAM (INCLUDING BUT NOT LIMITED  
TO LOSS OF DATA OR DATA BEING RENDERED  
INACCURATE OR LOSSES SUSTAINED BY YOU  
OR THIRD PARTIES OR A FAILURE OF THE  
PROGRAM TO OPERATE WITH ANY OTHER  
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER  
PARTY HAS BEEN ADVISED OF THE POSSIBILITY  
OF SUCH DAMAGES.  
‘show c’; they could even be mouse-clicks or menu  
items--whatever suits your program.  
You should also get your employer (if you work  
as a programmer) or your school, if any, to sign a  
“copyright disclaimer” for the program, if necessary.  
Here is a sample; alter the names:  
Yoyodyne, Inc., hereby disclaims all copyright  
interest in the program ‘Gnomovision’ (which makes  
passes at compilers) written by James Hacker.  
signature of Ty Coon, 1 April 1989  
Ty Coon, President of Vice  
end oF terms and conditions  
This General Public License does not permit  
incorporating your program into proprietary  
programs. If your program is a subroutine library,  
you may consider it more useful to permit linking  
proprietary applications with the library. If this is  
what you want to do, use the GNU Lesser General  
Public License instead of this License.  
how to apply these terms to your  
new programs  
If you develop a new program, and you want it to be  
of the greatest possible use to the public, the best  
way to achieve this is to make it free software which  
everyone can redistribute and change under these  
terms.  
To do so, attach the following notices to the  
program. It is safest to attach them to the start  
of each source file to most effectively convey the  
exclusion of warranty; and each file should have at  
least the “copyright” line and a pointer to where the  
full notice is found.  
gnu generaL puBLic License  
Version 3, 29 June 2007  
Copyright © 2007 Free Software Foundation, Inc.  
<http://fsf.org/>  
Everyone is permitted to copy and distribute  
verbatim copies of this license document, but  
changing it is not allowed.  
one line to give the program’s name and an idea of  
what it does.  
Copyright (C) yyyy name of author  
preamble  
This program is free software; you can redistribute  
it and/or modify it under the terms of the GNU  
General Public License as published by the Free  
Software Foundation; either version 2 of the  
License, or (at your option) any later version.  
The GNU General Public License is a free, copyleft  
license for software and other kinds of works.  
The licenses for most software and other practical  
works are designed to take away your freedom to  
share and change the works. By contrast, the GNU  
General Public License is intended to guarantee  
your freedom to share and change all versions of  
a program--to make sure it remains free software  
for all its users. We, the Free Software Foundation,  
use the GNU General Public License for most of our  
software; it applies also to any other work released  
this way by its authors. You can apply it to your  
programs, too.  
This program is distributed in the hope that it will  
be useful, but WITHOUT ANY WARRANTY; without  
even the implied warranty of MERCHANTABILITY or  
FITNESS FOR A PARTICULAR PURPOSE. See the  
GNU General Public License for more details.  
You should have received a copy of the GNU  
General Public License along with this program;  
if not, write to the Free Software Foundation,  
Inc., 51 Franklin Street, Fifth Floor, Boston, MA  
02110-1301, USA.  
When we speak of free software, we are referring to  
freedom, not price. Our General Public Licenses are  
designed to make sure that you have the freedom  
to distribute copies of free software (and charge for  
them if you wish), that you receive source code or  
can get it if you want it, that you can change the  
software or use pieces of it in new free programs,  
and that you know you can do these things.  
Also add information on how to contact you by  
electronic and paper mail.  
If the program is interactive, make it output a short  
notice like this when it starts in an interactive mode:  
Gnomovision version 69, Copyright (C) year name  
of author Gnomovision comes with ABSOLUTELY  
NO WARRANTY; for details type ‘show w’. This is  
free software, and you are welcome to redistribute it  
under certain conditions; type ‘show c’ for details.  
To protect your rights, we need to prevent others  
from denying you these rights or asking you to  
surrender the rights. Therefore, you have certain  
responsibilities if you distribute copies of the  
software, or if you modify it: responsibilities to  
respect the freedom of others.  
The hypothetical commands ‘show w’ and ‘show  
c’ should show the appropriate parts of the General  
Public License. Of course, the commands you use  
may be called something other than ‘show w’ and  
10ꢄ_ appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 106  
2008-12-04 오전 10:17:47  
For example, if you distribute copies of such a  
program, whether gratis or for a fee, you must pass  
on to the recipients the same freedoms that you  
received. You must make sure that they, too, receive  
or can get the source code. And you must show  
them these terms so they know their rights.  
To “modify” a work means to copy from or adapt all  
or part of the work in a fashion requiring copyright  
permission, other than the making of an exact copy.  
The resulting work is called a “modified version” of  
the earlier work or a work “based on” the earlier  
work.  
Developers that use the GNU GPL protect your  
rights with two steps: (1) assert copyright on the  
software, and (2) offer you this License giving you  
legal permission to copy, distribute and/or modify it.  
A “covered work” means either the unmodified  
Program or a work based on the Program.  
To “propagate” a work means to do anything with it  
that, without permission, would make you directly or  
secondarily liable for infringement under applicable  
copyright law, except executing it on a computer  
or modifying a private copy. Propagation includes  
copying, distribution (with or without modification),  
making available to the public, and in some  
countries other activities as well.  
For the developers' and authors' protection, the  
GPL clearly explains that there is no warranty for  
this free software. For both users' and authors'  
sake, the GPL requires that modified versions be  
marked as changed, so that their problems will not  
be attributed erroneously to authors of previous  
versions.  
To “convey” a work means any kind of propagation  
that enables other parties to make or receive  
copies. Mere interaction with a user through a  
computer network, with no transfer of a copy, is not  
conveying.  
Some devices are designed to deny users access  
to install or run modified versions of the software  
inside them, although the manufacturer can do so.  
This is fundamentally incompatible with the aim of  
protecting users' freedom to change the software.  
The systematic pattern of such abuse occurs in  
the area of products for individuals to use, which is  
precisely where it is most unacceptable. Therefore,  
we have designed this version of the GPL to prohibit  
the practice for those products. If such problems  
arise substantially in other domains, we stand ready  
to extend this provision to those domains in future  
versions of the GPL, as needed to protect the  
freedom of users.  
An interactive user interface displays “Appropriate  
Legal Notices” to the extent that it includes a  
convenient and prominently visible feature that (1)  
displays an appropriate copyright notice, and (2)  
tells the user that there is no warranty for the work  
(except to the extent that warranties are provided),  
that licensees may convey the work under this  
License, and how to view a copy of this License.  
If the interface presents a list of user commands or  
options, such as a menu, a prominent item in the  
list meets this criterion.  
Finally, every program is threatened constantly by  
software patents. States should not allow patents  
to restrict development and use of software on  
general-purpose computers, but in those that do,  
we wish to avoid the special danger that patents  
applied to a free program could make it effectively  
proprietary. To prevent this, the GPL assures that  
patents cannot be used to render the program non-  
free.  
1. source code.  
The “source code” for a work means the preferred  
form of the work for making modifications to it.  
“Object code” means any non-source form of a  
work.  
A “Standard Interface” means an interface that  
either is an official standard defined by a recognized  
standards body, or, in the case of interfaces  
specified for a particular programming language,  
one that is widely used among developers working  
in that language.  
The precise terms and conditions for copying,  
distribution and modification follow.  
terms and conditions  
The “System Libraries” of an executable work  
include anything, other than the work as a whole,  
that (a) is included in the normal form of packaging  
a Major Component, but which is not part of that  
Major Component, and (b) serves only to enable  
use of the work with that Major Component, or  
to implement a Standard Interface for which an  
implementation is available to the public in source  
code form. A “Major Component”, in this context,  
means a major essential component (kernel,  
window system, and so on) of the specific operating  
system (if any) on which the executable work runs,  
or a compiler used to produce the work, or an  
object code interpreter used to run it.  
0. definitions.  
“This License” refers to version 3 of the GNU  
General Public License.  
“Copyright” also means copyright-like laws  
that apply to other kinds of works, such as  
semiconductor masks.  
“The Program” refers to any copyrightable work  
licensed under this License. Each licensee is  
addressed as “you”. “Licensees” and “recipients”  
may be individuals or organizations.  
English _10ꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 107  
2008-12-04 오전 10:17:47  
The “Corresponding Source” for a work in object  
code form means all the source code needed to  
generate, install, and (for an executable work) run  
the object code and to modify the work, including  
scripts to control those activities. However, it does  
not include the work's System Libraries, or general-  
purpose tools or generally available free programs  
which are used unmodified in performing those  
activities but which are not part of the work. For  
example, Corresponding Source includes interface  
definition files associated with source files for the  
work, and the source code for shared libraries and  
dynamically linked subprograms that the work is  
specifically designed to require, such as by intimate  
data communication or control flow between those  
subprograms and other parts of the work.  
When you convey a covered work, you waive any  
legal power to forbid circumvention of technological  
measures to the extent such circumvention is  
effected by exercising rights under this License with  
respect to the covered work, and you disclaim any  
intention to limit operation or modification of the  
work as a means of enforcing, against the work's  
users, your or third parties' legal rights to forbid  
circumvention of technological measures.  
4. conveying verbatim copies.  
You may convey verbatim copies of the Program's  
source code as you receive it, in any medium,  
provided that you conspicuously and appropriately  
publish on each copy an appropriate copyright  
notice; keep intact all notices stating that this  
License and any non-permissive terms added in  
accord with section 7 apply to the code; keep intact  
all notices of the absence of any warranty; and give  
all recipients a copy of this License along with the  
Program.  
The Corresponding Source need not include  
anything that users can regenerate automatically  
from other parts of the Corresponding Source.  
The Corresponding Source for a work in source  
code form is that same work.  
You may charge any price or no price for each  
copy that you convey, and you may offer support or  
warranty protection for a fee.  
2. Basic permissions.  
All rights granted under this License are granted  
for the term of copyright on the Program, and are  
irrevocable provided the stated conditions are  
met. This License explicitly affirms your unlimited  
permission to run the unmodified Program. The  
output from running a covered work is covered  
by this License only if the output, given its  
content, constitutes a covered work. This License  
acknowledges your rights of fair use or other  
equivalent, as provided by copyright law.  
5. conveying modified source versions.  
You may convey a work based on the Program, or  
the modifications to produce it from the Program,  
in the form of source code under the terms of  
section 4, provided that you also meet all of these  
conditions:  
a) The work must carry prominent notices stating  
that you modified it, and giving a relevant date.  
b) The work must carry prominent notices stating  
that it is released under this License and  
any conditions added under section 7. This  
requirement modifies the requirement in section  
4 to “keep intact all notices”.  
.
.
You may make, run and propagate covered works  
that you do not convey, without conditions so  
long as your license otherwise remains in force.  
You may convey covered works to others for the  
sole purpose of having them make modifications  
exclusively for you, or provide you with facilities for  
running those works, provided that you comply  
with the terms of this License in conveying all  
material for which you do not control copyright.  
Those thus making or running the covered works  
for you must do so exclusively on your behalf, under  
your direction and control, on terms that prohibit  
them from making any copies of your copyrighted  
material outside their relationship with you.  
c) You must license the entire work, as a whole,  
under this License to anyone who comes into  
possession of a copy. This License will therefore  
apply, along with any applicable section 7  
additional terms, to the whole of the work,  
and all its parts, regardless of how they are  
packaged. This License gives no permission  
to license the work in any other way, but it  
does not invalidate such permission if you have  
separately received it.  
.
d) If the work has interactive user interfaces,  
each must display Appropriate Legal Notices;  
however, if the Program has interactive  
interfaces that do not display Appropriate Legal  
Notices, your work need not make them do so.  
.
Conveying under any other circumstances is  
permitted solely under the conditions stated below.  
Sublicensing is not allowed; section 10 makes it  
unnecessary.  
3. protecting users' Legal rights From anti-  
circumvention Law.  
A compilation of a covered work with other  
separate and independent works, which are not by  
their nature extensions of the covered work, and  
which are not combined with it such as to form a  
larger program, in or on a volume of a storage or  
distribution medium, is called an “aggregate” if the  
compilation and its resulting copyright are not used  
to limit the access or legal rights of the compilation's  
No covered work shall be deemed part of an  
effective technological measure under any applicable  
law fulfilling obligations under article 11 of the WIPO  
copyright treaty adopted on 20 December 1996, or  
similar laws prohibiting or restricting circumvention  
of such measures.  
10ꢆ_ appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 108  
2008-12-04 오전 10:17:47  
users beyond what the individual works permit.  
Inclusion of a covered work in an aggregate does  
not cause this License to apply to the other parts of  
the aggregate.  
A separable portion of the object code, whose  
source code is excluded from the Corresponding  
Source as a System Library, need not be included in  
conveying the object code work.  
6. conveying non-source Forms.  
A “User Product” is either (1) a “consumer product”,  
which means any tangible personal property  
which is normally used for personal, family, or  
household purposes, or (2) anything designed or  
sold for incorporation into a dwelling. In determining  
whether a product is a consumer product, doubtful  
cases shall be resolved in favor of coverage. For  
a particular product received by a particular user,  
“normally used” refers to a typical or common use of  
that class of product, regardless of the status of the  
particular user or of the way in which the particular  
user actually uses, or expects or is expected to  
use, the product. A product is a consumer product  
regardless of whether the product has substantial  
commercial, industrial or non-consumer uses,  
unless such uses represent the only significant  
mode of use of the product.  
You may convey a covered work in object code  
form under the terms of sections 4 and 5, provided  
that you also convey the machine-readable  
Corresponding Source under the terms of this  
License, in one of these ways:  
a) Convey the object code in, or embodied  
in, a physical product (including a physical  
distribution medium), accompanied by the  
Corresponding Source fixed on a durable  
physical medium customarily used for software  
interchange.  
b) Convey the object code in, or embodied  
in, a physical product (including a physical  
distribution medium), accompanied by a written  
offer, valid for at least three years and valid for  
as long as you offer spare parts or customer  
support for that product model, to give anyone  
who possesses the object code either (1) a  
copy of the Corresponding Source for all the  
software in the product that is covered by  
this License, on a durable physical medium  
customarily used for software interchange, for  
a price no more than your reasonable cost of  
physically performing this conveying of source,  
or (2) access to copy the Corresponding Source  
from a network server at no charge.  
.
.
“Installation Information” for a User Product  
means any methods, procedures, authorization  
keys, or other information required to install and  
execute modified versions of a covered work in  
that User Product from a modified version of its  
Corresponding Source. The information must  
suffice to ensure that the continued functioning of  
the modified object code is in no case prevented or  
interfered with solely because modification has been  
made.  
c) Convey individual copies of the object code  
with a copy of the written offer to provide the  
Corresponding Source. This alternative is  
allowed only occasionally and noncommercially,  
and only if you received the object code with  
such an offer, in accord with subsection 6b.  
d) Convey the object code by offering access from  
a designated place (gratis or for a charge), and  
offer equivalent access to the Corresponding  
Source in the same way through the same  
place at no further charge. You need not require  
recipients to copy the Corresponding Source  
along with the object code. If the place to  
copy the object code is a network server, the  
Corresponding Source may be on a different  
server (operated by you or a third party) that  
supports equivalent copying facilities, provided  
you maintain clear directions next to the object  
code saying where to find the Corresponding  
Source. Regardless of what server hosts the  
Corresponding Source, you remain obligated to  
ensure that it is available for as long as needed  
to satisfy these requirements.  
.
.
If you convey an object code work under this  
section in, or with, or specifically for use in, a User  
Product, and the conveying occurs as part of a  
transaction in which the right of possession and use  
of the User Product is transferred to the recipient  
in perpetuity or for a fixed term (regardless of how  
the transaction is characterized), the Corresponding  
Source conveyed under this section must be  
accompanied by the Installation Information. But  
this requirement does not apply if neither you nor  
any third party retains the ability to install modified  
object code on the User Product (for example, the  
work has been installed in ROM).  
The requirement to provide Installation Information  
does not include a requirement to continue to  
provide support service, warranty, or updates for  
a work that has been modified or installed by the  
recipient, or for the User Product in which it has  
been modified or installed. Access to a network may  
be denied when the modification itself materially and  
adversely affects the operation of the network or  
violates the rules and protocols for communication  
across the network.  
e) Convey the object code using peer-to-peer  
transmission, provided you inform other peers  
where the object code and Corresponding  
Source of the work are being offered to the  
general public at no charge under subsection  
6d.  
.
Corresponding Source conveyed, and Installation  
Information provided, in accord with this section  
must be in a format that is publicly documented  
(and with an implementation available to the public  
English _109  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 109  
2008-12-04 오전 10:17:47  
in source code form), and must require no special  
password or key for unpacking, reading or copying.  
by the terms of that license document, provided  
that the further restriction does not survive such  
relicensing or conveying.  
7. additional terms.  
“Additional permissions” are terms that supplement  
the terms of this License by making exceptions from  
one or more of its conditions. Additional permissions  
that are applicable to the entire Program shall  
be treated as though they were included in this  
License, to the extent that they are valid under  
applicable law. If additional permissions apply only  
to part of the Program, that part may be used  
separately under those permissions, but the entire  
Program remains governed by this License without  
regard to the additional permissions.  
If you add terms to a covered work in accord with  
this section, you must place, in the relevant source  
files, a statement of the additional terms that apply  
to those files, or a notice indicating where to find the  
applicable terms.  
Additional terms, permissive or non-permissive, may  
be stated in the form of a separately written license,  
or stated as exceptions; the above requirements  
apply either way.  
8. termination.  
When you convey a copy of a covered work,  
you may at your option remove any additional  
permissions from that copy, or from any part of it.  
(Additional permissions may be written to require  
their own removal in certain cases when you modify  
the work.) You may place additional permissions  
on material, added by you to a covered work, for  
which you have or can give appropriate copyright  
permission.  
You may not propagate or modify a covered work  
except as expressly provided under this License.  
Any attempt otherwise to propagate or modify it  
is void, and will automatically terminate your rights  
under this License (including any patent licenses  
granted under the third paragraph of section 11).  
However, if you cease all violation of this License,  
then your license from a particular copyright holder  
is reinstated (a) provisionally, unless and until the  
copyright holder explicitly and finally terminates  
your license, and (b) permanently, if the copyright  
holder fails to notify you of the violation by some  
reasonable means prior to 60 days after the  
cessation.  
Notwithstanding any other provision of this License,  
for material you add to a covered work, you may (if  
authorized by the copyright holders of that material)  
supplement the terms of this License with terms:  
a) Disclaiming warranty or limiting liability differently  
from the terms of sections 15 and 16 of this  
License; or  
b) Requiring preservation of specified reasonable  
legal notices or author attributions in that  
material or in the Appropriate Legal Notices  
displayed by works containing it; or  
c) Prohibiting misrepresentation of the origin of  
that material, or requiring that modified versions  
of such material be marked in reasonable ways  
as different from the original version; or  
d) Limiting the use for publicity purposes of names  
of licensors or authors of the material; or  
e) Declining to grant rights under trademark law  
for use of some trade names, trademarks, or  
service marks; or  
f) Requiring indemnification of licensors and  
authors of that material by anyone who conveys  
the material (or modified versions of it) with  
contractual assumptions of liability to the  
recipient, for any liability that these contractual  
assumptions directly impose on those licensors  
and authors.  
.
Moreover, your license from a particular copyright  
holder is reinstated permanently if the copyright  
holder notifies you of the violation by some  
reasonable means, this is the first time you have  
received notice of violation of this License (for any  
work) from that copyright holder, and you cure the  
violation prior to 30 days after your receipt of the  
notice.  
.
.
Termination of your rights under this section does  
not terminate the licenses of parties who have  
received copies or rights from you under this  
License. If your rights have been terminated and not  
permanently reinstated, you do not qualify to receive  
new licenses for the same material under section  
10.  
.
.
.
9. acceptance not required for having copies.  
You are not required to accept this License in  
order to receive or run a copy of the Program.  
Ancillary propagation of a covered work occurring  
solely as a consequence of using peer-to-peer  
transmission to receive a copy likewise does not  
require acceptance. However, nothing other than  
this License grants you permission to propagate or  
modify any covered work. These actions infringe  
copyright if you do not accept this License.  
Therefore, by modifying or propagating a covered  
work, you indicate your acceptance of this License  
to do so.  
All other non-permissive additional terms are  
considered “further restrictions” within the meaning  
of section 10. If the Program as you received it,  
or any part of it, contains a notice stating that it is  
governed by this License along with a term that is  
a further restriction, you may remove that term. If a  
license document contains a further restriction but  
permits relicensing or conveying under this License,  
you may add to a covered work material governed  
110_ appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 110  
2008-12-04 오전 10:17:48  
10. automatic Licensing of downstream  
recipients.  
agreement or commitment not to enforce a patent  
against the party.  
Each time you convey a covered work, the recipient  
automatically receives a license from the original  
licensors, to run, modify and propagate that work,  
subject to this License. You are not responsible  
for enforcing compliance by third parties with this  
License.  
If you convey a covered work, knowingly relying on  
a patent license, and the Corresponding Source of  
the work is not available for anyone to copy, free of  
charge and under the terms of this License, through  
a publicly available network server or other readily  
accessible means, then you must either (1) cause  
the Corresponding Source to be so available, or  
(2) arrange to deprive yourself of the benefit of the  
patent license for this particular work, or (3) arrange,  
in a manner consistent with the requirements  
of this License, to extend the patent license to  
downstream recipients. “Knowingly relying” means  
you have actual knowledge that, but for the patent  
license, your conveying the covered work in a  
country, or your recipient's use of the covered work  
in a country, would infringe one or more identifiable  
patents in that country that you have reason to  
believe are valid.  
An “entity transaction” is a transaction transferring  
control of an organization, or substantially all assets  
of one, or subdividing an organization, or merging  
organizations. If propagation of a covered work  
results from an entity transaction, each party to that  
transaction who receives a copy of the work also  
receives whatever licenses to the work the party's  
predecessor in interest had or could give under  
the previous paragraph, plus a right to possession  
of the Corresponding Source of the work from the  
predecessor in interest, if the predecessor has it or  
can get it with reasonable efforts.  
You may not impose any further restrictions on the  
exercise of the rights granted or affirmed under this  
License. For example, you may not impose a license  
fee, royalty, or other charge for exercise of rights  
granted under this License, and you may not initiate  
litigation (including a cross-claim or counterclaim in  
a lawsuit) alleging that any patent claim is infringed  
by making, using, selling, offering for sale, or  
If, pursuant to or in connection with a single  
transaction or arrangement, you convey, or  
propagate by procuring conveyance of, a covered  
work, and grant a patent license to some of the  
parties receiving the covered work authorizing them  
to use, propagate, modify or convey a specific copy  
of the covered work, then the patent license you  
grant is automatically extended to all recipients of  
the covered work and works based on it.  
importing the Program or any portion of it.  
A patent license is “discriminatory” if it does not  
include within the scope of its coverage, prohibits  
the exercise of, or is conditioned on the non-  
exercise of one or more of the rights that are  
specifically granted under this License. You may  
not convey a covered work if you are a party to  
an arrangement with a third party that is in the  
business of distributing software, under which you  
make payment to the third party based on the  
extent of your activity of conveying the work, and  
under which the third party grants, to any of the  
parties who would receive the covered work from  
you, a discriminatory patent license (a) in connection  
with copies of the covered work conveyed by you  
(or copies made from those copies), or (b) primarily  
for and in connection with specific products or  
compilations that contain the covered work, unless  
you entered into that arrangement, or that patent  
license was granted, prior to 28 March 2007.  
11. patents.  
A “contributor” is a copyright holder who authorizes  
use under this License of the Program or a work on  
which the Program is based. The work thus licensed  
is called the contributor's “contributor version”.  
A contributor's “essential patent claims” are all  
patent claims owned or controlled by the contributor,  
whether already acquired or hereafter acquired,  
that would be infringed by some manner, permitted  
by this License, of making, using, or selling its  
contributor version, but do not include claims that  
would be infringed only as a consequence of further  
modification of the contributor version. For purposes  
of this definition, “control” includes the right to grant  
patent sublicenses in a manner consistent with the  
requirements of this License.  
Each contributor grants you a non-exclusive,  
worldwide, royalty-free patent license under the  
contributor's essential patent claims, to make,  
use, sell, offer for sale, import and otherwise run,  
modify and propagate the contents of its contributor  
version.  
Nothing in this License shall be construed as  
excluding or limiting any implied license or other  
defenses to infringement that may otherwise be  
available to you under applicable patent law.  
12. no surrender of others' Freedom.  
In the following three paragraphs, a “patent license”  
is any express agreement or commitment, however  
denominated, not to enforce a patent (such as an  
express permission to practice a patent or covenant  
not to sue for patent infringement). To “grant” such  
a patent license to a party means to make such an  
If conditions are imposed on you (whether by court  
order, agreement or otherwise) that contradict  
the conditions of this License, they do not excuse  
you from the conditions of this License. If you  
cannot convey a covered work so as to satisfy  
simultaneously your obligations under this License  
English _111  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 111  
2008-12-04 오전 10:17:48  
and any other pertinent obligations, then as a  
consequence you may not convey it at all. For  
example, if you agree to terms that obligate you to  
collect a royalty for further conveying from those to  
whom you convey the Program, the only way you  
could satisfy both those terms and this License  
would be to refrain entirely from conveying the  
Program.  
PARTICULAR PURPOSE. THE ENTIRE RISK  
AS TO THE QUALITY AND PERFORMANCE OF  
THE PROGRAM IS WITH YOU. SHOULD THE  
PROGRAM PROVE DEFECTIVE, YOU ASSUME  
THE COST OF ALL NECESSARY SERVICING,  
REPAIR OR CORRECTION.  
16. Limitation of Liability.  
IN NO EVENT UNLESS REQUIRED BY  
13. use with the gnu affero general public  
License.  
APPLICABLE LAW OR AGREED TO IN WRITING  
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER  
PARTY WHO MODIFIES AND/OR CONVEYS THE  
PROGRAM AS PERMITTED ABOVE, BE LIABLE TO  
YOU FOR DAMAGES, INCLUDING ANY GENERAL,  
SPECIAL, INCIDENTAL OR CONSEQUENTIAL  
DAMAGES ARISING OUT OF THE USE OR  
INABILITY TO USE THE PROGRAM (INCLUDING  
BUT NOT LIMITED TO LOSS OF DATA OR DATA  
BEING RENDERED INACCURATE OR LOSSES  
SUSTAINED BY YOU OR THIRD PARTIES OR  
A FAILURE OF THE PROGRAM TO OPERATE  
WITH ANY OTHER PROGRAMS), EVEN IF SUCH  
HOLDER OR OTHER PARTY HAS BEEN ADVISED  
OF THE POSSIBILITY OF SUCH DAMAGES.  
Notwithstanding any other provision of this License,  
you have permission to link or combine any covered  
work with a work licensed under version 3 of the  
GNU Affero General Public License into a single  
combined work, and to convey the resulting work.  
The terms of this License will continue to apply to  
the part which is the covered work, but the special  
requirements of the GNU Affero General Public  
License, section 13, concerning interaction through  
a network will apply to the combination as such.  
14. revised versions of this License.  
The Free Software Foundation may publish revised  
and/or new versions of the GNU General Public  
License from time to time. Such new versions will be  
similar in spirit to the present version, but may differ  
in detail to address new problems or concerns.  
17. interpretation of sections 15 and 16.  
If the disclaimer of warranty and limitation of liability  
provided above cannot be given local legal effect  
according to their terms, reviewing courts shall  
apply local law that most closely approximates  
an absolute waiver of all civil liability in connection  
with the Program, unless a warranty or assumption  
of liability accompanies a copy of the Program in  
return for a fee.  
Each version is given a distinguishing version  
number. If the Program specifies that a certain  
numbered version of the GNU General Public  
License “or any later version” applies to it, you have  
the option of following the terms and conditions  
either of that numbered version or of any later  
version published by the Free Software Foundation.  
If the Program does not specify a version number of  
the GNU General Public License, you may choose  
any version ever published by the Free Software  
Foundation.  
END OF TERMS AND CONDITIONS  
gnu Lesser generaL puBLic  
License  
If the Program specifies that a proxy can decide  
which future versions of the GNU General Public  
License can be used, that proxy's public statement  
of acceptance of a version permanently authorizes  
you to choose that version for the Program.  
Version 2.1, February 1999  
Copyright (C) 1991, 1999 Free Software Foundation,  
Inc.  
51 Franklin Street, Fifth Floor, Boston, MA  
02110-1301 USA  
Everyone is permitted to copy and distribute  
verbatim copies  
of this license document, but changing it is not  
allowed.  
Later license versions may give you additional  
or different permissions. However, no additional  
obligations are imposed on any author or copyright  
holder as a result of your choosing to follow a later  
version.  
[This is the first released version of the Lesser GPL.  
It also counts  
as the successor of the GNU Library Public  
License, version 2, hence  
the version number 2.1.]  
15. disclaimer of warranty.  
THERE IS NO WARRANTY FOR THE PROGRAM,  
TO THE EXTENT PERMITTED BY APPLICABLE  
LAW. EXCEPT WHEN OTHERWISE STATED IN  
WRITING THE COPYRIGHT HOLDERS AND/OR  
OTHER PARTIES PROVIDE THE PROGRAM “AS  
IS” WITHOUT WARRANTY OF ANY KIND, EITHER  
EXPRESSED OR IMPLIED, INCLUDING, BUT  
NOT LIMITED TO, THE IMPLIED WARRANTIES  
OF MERCHANTABILITY AND FITNESS FOR A  
preamble  
The licenses for most software are designed to  
take away your freedom to share and change it.  
By contrast, the GNU General Public Licenses are  
11ꢀ_ appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 112  
2008-12-04 오전 10:17:48  
intended to guarantee your freedom to share and  
change free software to make sure the software is  
free for all its users.  
General Public License. We use this license for  
certain libraries in order to permit linking those  
libraries into non-free programs.  
This license, the Lesser General Public License,  
applies to some specially designated software  
packages--typically libraries--of the Free Software  
Foundation and other authors who decide to use  
it. You can use it too, but we suggest you first think  
carefully about whether this license or the ordinary  
General Public License is the better strategy to use  
in any particular case, based on the explanations  
below.  
When we speak of free software, we are referring  
to freedom of use, not price. Our General Public  
Licenses are designed to make sure that you have  
the freedom to distribute copies of free software (and  
charge for this service if you wish); that you receive  
source code or can get it if you want it; that you can  
change the software and use pieces of it in new free  
programs; and that you are informed that you can  
When a program is linked with a library, whether  
statically or using a shared library, the combination  
of the two is legally speaking a combined work, a  
derivative of the original library. The ordinary General  
Public License therefore permits such linking only  
if the entire combination fits its criteria of freedom.  
The Lesser General Public License permits more lax  
criteria for linking other code with the library.  
We call this license the “Lesser” General Public  
License because it does Less to protect the user’s  
freedom than the ordinary General Public License. It  
also provides other free software developers Less of  
an advantage over competing non-free programs.  
These disadvantages are the reason we use the  
ordinary General Public License for many libraries.  
However, the Lesser license provides advantages in  
certain special circumstances.  
do these things.  
For example, on rare occasions, there may be a  
special need to encourage the widest possible use  
of a certain library, so that it becomes a de-facto  
standard. To achieve this, non-free programs must  
be allowed to use the library. A more frequent case  
is that a free library does the same job as widely  
used non-free libraries. In this case, there is little to  
gain by limiting the free library to free software only,  
so we use the Lesser General Public License.  
In other cases, permission to use a particular library  
in non-free programs enables a greater number of  
people to use a large body of free software. For  
example, permission to use the GNU C Library in  
non-free programs enables many more people to  
use the whole GNU operating system, as well as its  
variant, the GNU/Linux operating system.  
To protect your rights, we need to make restrictions  
that forbid distributors to deny you these rights or to  
ask you to surrender these rights. These restrictions  
translate to certain responsibilities for you if you  
distribute copies of the library or if you modify it.  
For example, if you distribute copies of the library,  
whether gratis or for a fee, you must give the  
recipients all the rights that we gave you. You  
must make sure that they, too, receive or can get  
the source code. If you link other code with the  
library, you must provide complete object files to  
the recipients, so that they can relink them with  
the library after making changes to the library and  
recompiling it. And you must show them these  
terms so they know their rights.  
Although the Lesser General Public License is Less  
protective of the users’ freedom, it does ensure that  
the user of a program that is linked with the Library  
has the freedom and the wherewithal to run that  
program using a modified version of the Library.  
We protect your rights with a two-step method: (1)  
we copyright the library, and (2) we offer you this  
license, which gives you legal permission to copy,  
distribute and/or modify the library.  
To protect each distributor, we want to make it very  
clear that there is no warranty for the free library.  
Also, if the library is modified by someone else and  
passed on, the recipients should know that what  
they have is not the original version, so that the  
original author’s reputation will not be affected by  
problems that might be introduced by others.  
The precise terms and conditions for copying,  
distribution and modification follow. Pay close  
attention to the difference between a “work based  
on the library” and a “work that uses the library”.  
The former contains code derived from the library,  
whereas the latter must be combined with the  
library in order to run.  
Finally, software patents pose a constant threat to  
the existence of any free program. We wish to make  
sure that a company cannot effectively restrict the  
users of a free program by obtaining a restrictive  
license from a patent holder. Therefore, we insist  
that any patent license obtained for a version of the  
library must be consistent with the full freedom of  
use specified in this license.  
Most GNU software, including some libraries,  
is covered by the ordinary GNU General Public  
License. This license, the GNU Lesser General  
Public License, applies to certain designated  
libraries, and is quite different from the ordinary  
terms and conditions For  
copying, distriBution and  
modiFication  
0. This License Agreement applies to any software  
library or other program which contains a notice  
placed by the copyright holder or other authorized  
party saying it may be distributed under the terms of  
this Lesser General Public License (also called “this  
License”). Each licensee is addressed as “you”.  
English _11ꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 113  
2008-12-04 오전 10:17:48  
A “library” means a collection of software functions  
and/or data prepared so as to be conveniently  
linked with application programs (which use some  
of those functions and data) to form executables.  
than as an argument passed when the facility is  
invoked, then you must make a good faith effort  
to ensure that, in the event an application does  
not supply such function or table, the facility  
still operates, and performs whatever part of its  
purpose remains meaningful.  
The “Library”, below, refers to any such software  
library or work which has been distributed under  
these terms. A “work based on the Library” means  
either the Library or any derivative work under  
copyright law: that is to say, a work containing the  
Library or a portion of it, either verbatim or with  
modifications and/or translated straightforwardly  
into another language. (Hereinafter, translation  
is included without limitation in the term  
(For example, a function in a library to compute  
square roots has a purpose that is entirely well-  
defined independent of the application. Therefore,  
Subsection 2d requires that any application-  
supplied function or table used by this function must  
be optional: if the application does not supply it,  
the square root function must still compute square  
roots.)  
“modification”.)  
“Source code” for a work means the preferred form  
of the work for making modifications to it. For a  
library, complete source code means all the source  
code for all modules it contains, plus any associated  
interface definition files, plus the scripts used to  
control compilation and installation of the library.  
Activities other than copying, distribution and  
modification are not covered by this License; they  
are outside its scope. The act of running a program  
using the Library is not restricted, and output from  
such a program is covered only if its contents  
constitute a work based on the Library (independent  
of the use of the Library in a tool for writing it).  
Whether that is true depends on what the Library  
does and what the program that uses the Library  
does.  
These requirements apply to the modified work as  
a whole. If identifiable sections of that work are not  
derived from the Library, and can be reasonably  
considered independent and separate works in  
themselves, then this License, and its terms, do not  
apply to those sections when you distribute them as  
separate works. But when you distribute the same  
sections as part of a whole which is a work based  
on the Library, the distribution of the whole must be  
on the terms of this License, whose permissions for  
other licensees extend to the entire whole, and thus  
to each and every part regardless of who wrote it.  
Thus, it is not the intent of this section to claim  
rights or contest your rights to work written entirely  
by you; rather, the intent is to exercise the right to  
control the distribution of derivative or collective  
works based on the Library.  
1. You may copy and distribute verbatim copies of  
the Library’s complete source code as you receive  
it, in any medium, provided that you conspicuously  
and appropriately publish on each copy an  
appropriate copyright notice and disclaimer of  
warranty; keep intact all the notices that refer to  
this License and to the absence of any warranty;  
and distribute a copy of this License along with the  
Library.  
In addition, mere aggregation of another work not  
based on the Library with the Library (or with a work  
based on the Library) on a volume of a storage or  
distribution medium does not bring the other work  
under the scope of this License.  
ꢁ. You may opt to apply the terms of the ordinary  
GNU General Public License instead of this License  
to a given copy of the Library. To do this, you must  
alter all the notices that refer to this License, so  
that they refer to the ordinary GNU General Public  
License, version 2, instead of to this License. (If a  
newer version than version 2 of the ordinary GNU  
General Public License has appeared, then you  
can specify that version instead if you wish.) Do not  
make any other change in these notices.  
Once this change is made in a given copy, it is  
irreversible for that copy, so the ordinary GNU  
General Public License applies to all subsequent  
copies and derivative works made from that copy.  
You may charge a fee for the physical act of  
transferring a copy, and you may at your option offer  
warranty protection in exchange for a fee.  
ꢀ. You may modify your copy or copies of the  
Library or any portion of it, thus forming a work  
based on the Library, and copy and distribute such  
modifications or work under the terms of Section  
1 above, provided that you also meet all of these  
conditions:  
a) The modified work must itself be a software  
library.  
b)You must cause the files modified to carry  
prominent notices stating that you changed the  
files and the date of any change.  
This option is useful when you wish to copy part of  
the code of the Library into a program that is not a  
library.  
ꢂ. You may copy and distribute the Library (or  
a portion or derivative of it, under Section 2) in  
object code or executable form under the terms  
of Sections 1 and 2 above provided that you  
accompany it with the complete corresponding  
machine-readable source code, which must be  
distributed under the terms of Sections 1 and 2  
c) You must cause the whole of the work to be  
licensed at no charge to all third parties under  
the terms of this License.  
d)If a facility in the modified Library refers to a  
function or a table of data to be supplied by an  
application program that uses the facility, other  
11ꢂ_ appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 114  
2008-12-04 오전 10:17:48  
above on a medium customarily used for software  
interchange.  
user to the copy of this License. Also, you must do  
one of these things:  
If distribution of object code is made by offering  
access to copy from a designated place, then  
offering equivalent access to copy the source code  
from the same place satisfies the requirement to  
distribute the source code, even though third parties  
are not compelled to copy the source along with the  
object code.  
a) Accompany the work with the complete  
corresponding machine-readable source code  
for the Library including whatever changes were  
used in the work (which must be distributed  
under Sections 1 and 2 above); and, if the  
work is an executable linked with the Library,  
with the complete machine readable “work  
that uses the Library”, as object code and/or  
source code, so that the user can modify the  
Library and then relink to produce a modified  
executable containing the modified Library. (It  
is understood that the user who changes the  
contents of definitions files in the Library will not  
necessarily be able to recompile the application  
to use the modified definitions.)  
b)Use a suitable shared library mechanism for  
linking with the Library. A suitable mechanism  
is one that (1) uses at run time a copy of the  
library already present on the user’s computer  
system, rather than copying library functions  
into the executable, and (2) will operate properly  
with a modified version of the library, if the user  
installs one, as long as the modified version is  
interface-compatible with the version that the  
work was made with.  
ꢃ. A program that contains no derivative of any  
portion of the Library, but is designed to work with  
the Library by being compiled or linked with it, is  
called a “work that uses the Library”. Such a work,  
in isolation, is not a derivative work of the Library,  
and therefore falls outside the scope of this License.  
However, linking a “work that uses the Library” with  
the Library creates an executable that is a derivative  
of the Library (because it contains portions of the  
Library), rather than a “work that uses the library”.  
The executable is therefore covered by this License.  
Section 6 states terms for distribution of such  
executables.  
When a “work that uses the Library” uses material  
from a header file that is part of the Library, the  
object code for the work may be a derivative work  
of the Library even though the source code is not.  
Whether this is true is especially significant if the  
work can be linked without the Library, or if the work  
is itself a library. The threshold for this to be true is  
not precisely defined by law.  
If such an object file uses only numerical  
parameters, data structure layouts and accessors,  
and small macros and small inline functions (ten  
lines or less in length), then the use of the object file  
is unrestricted, regardless of whether it is legally a  
derivative work. (Executables containing this object  
code plus portions of the Library will still fall under  
Section 6.)  
c) Accompany the work with a written offer,  
valid for at least three years, to give the same  
user the materials specified in Subsection 6a,  
above, for a charge no more than the cost of  
performing this distribution.  
d)If distribution of the work is made by offering  
access to copy from a designated place, offer  
equivalent access to copy the above specified  
materials from the same place.  
e) Verify that the user has already received a copy  
of these materials or that you have already sent  
this user a copy.  
Otherwise, if the work is a derivative of the Library,  
you may distribute the object code for the work  
under the terms of Section 6. Any executables  
containing that work also fall under Section 6,  
whether or not they are linked directly with the  
Library itself.  
For an executable, the required form of the “work  
that uses the Library” must include any data  
and utility programs needed for reproducing the  
executable from it. However, as a special exception,  
the materials to be distributed need not include  
anything that is normally distributed (in either source  
or binary form) with the major components (compiler,  
kernel, and so on) of the operating system on which  
the executable runs, unless that component itself  
accompanies the executable.  
It may happen that this requirement contradicts the  
license restrictions of other proprietary libraries that  
do not normally accompany the operating system.  
Such a contradiction means you cannot use both  
them and the Library together in an executable that  
you distribute.  
ꢄ. As an exception to the Sections above, you may  
also combine or link a “work that uses the Library”  
with the Library to produce a work containing  
portions of the Library, and distribute that work  
under terms of your choice, provided that the terms  
permit modification of the work for the customer’  
s own use and reverse engineering for debugging  
such modifications.  
You must give prominent notice with each copy of  
the work that the Library is used in it and that the  
Library and its use are covered by this License.  
You must supply a copy of this License. If the work  
during execution displays copyright notices, you  
must include the copyright notice for the Library  
among them, as well as a reference directing the  
ꢅ. You may place library facilities that are a work  
based on the Library side-by-side in a single library  
together with other library facilities not covered by  
this License, and distribute such a combined library,  
provided that the separate distribution of the work  
English _11ꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 115  
2008-12-04 오전 10:17:48  
based on the Library and of the other library facilities  
is otherwise permitted, and provided that you do  
these two things:  
the balance of the section is intended to apply, and  
the section as a whole is intended to apply in other  
circumstances.  
a) Accompany the combined library with a  
copy of the same work based on the Library,  
uncombined with any other library facilities.  
This must be distributed under the terms of the  
Sections above.  
b)Give prominent notice with the combined library  
of the fact that part of it is a work based on  
the Library, and explaining where to find the  
accompanying uncombined form of the same  
work.  
It is not the purpose of this section to induce you to  
infringe any patents or other property right claims or  
to contest validity of any such claims; this section  
has the sole purpose of protecting the integrity  
of the free software distribution system which is  
implemented by public license practices. Many  
people have made generous contributions to the  
wide range of software distributed through that  
system in reliance on consistent application of that  
system; it is up to the author/donor to decide if he  
or she is willing to distribute software through any  
other system and a licensee cannot impose that  
choice.  
ꢆ. You may not copy, modify, sublicense, link  
with, or distribute the Library except as expressly  
provided under this License. Any attempt otherwise  
to copy, modify, sublicense, link with, or distribute  
the Library is void, and will automatically terminate  
your rights under this License. However, parties  
who have received copies, or rights, from you under  
this License will not have their licenses terminated  
so long as such parties remain in full compliance.  
This section is intended to make thoroughly clear  
what is believed to be a consequence of the rest of  
this License.  
1ꢀ. If the distribution and/or use of the Library is  
restricted in certain countries either by patents or by  
copyrighted interfaces, the original copyright holder  
who places the Library under this License may  
add an explicit geographical distribution limitation  
excluding those countries, so that distribution is  
permitted only in or among countries not thus  
excluded. In such case, this License incorporates  
the limitation as if written in the body of this License.  
9. You are not required to accept this License, since  
you have not signed it. However, nothing else grants  
you permission to modify or distribute the Library  
or its derivative works. These actions are prohibited  
by law if you do not accept this License. Therefore,  
by modifying or distributing the Library (or any work  
based on the Library), you indicate your acceptance  
of this License to do so, and all its terms and  
conditions for copying, distributing or modifying the  
Library or works based on it.  
1ꢁ. The Free Software Foundation may publish  
revised and/or new versions of the Lesser General  
Public License from time to time. Such new versions  
will be similar in spirit to the present version, but  
may differ in detail to address new problems or  
concerns.  
Each version is given a distinguishing version  
number. If the Library specifies a version number  
of this License which applies to it and “any later  
version”, you have the option of following the  
terms and conditions either of that version or of  
any later version published by the Free Software  
Foundation. If the Library does not specify a license  
version number, you may choose any version ever  
published by the Free Software Foundation.  
10. Each time you redistribute the Library (or  
any work based on the Library), the recipient  
automatically receives a license from the original  
licensor to copy, distribute, link with or modify the  
Library subject to these terms and conditions. You  
may not impose any further restrictions on the  
recipients’ exercise of the rights granted herein. You  
are not responsible for enforcing compliance by  
third parties with this License.  
11. If, as a consequence of a court judgment or  
allegation of patent infringement or for any other  
reason (not limited to patent issues), conditions are  
imposed on you (whether by court order, agreement  
or otherwise) that contradict the conditions of this  
License, they do not excuse you from the conditions  
of this License. If you cannot distribute so as to  
satisfy simultaneously your obligations under this  
License and any other pertinent obligations, then as  
a consequence you may not distribute the Library at  
all. For example, if a patent license would not permit  
royalty free redistribution of the Library by all those  
who receive copies directly or indirectly through you,  
then the only way you could satisfy both it and this  
License would be to refrain entirely from distribution  
of the Library.  
1ꢂ. If you wish to incorporate parts of the Library  
into other free programs whose distribution  
conditions are incompatible with these, write to the  
author to ask for permission. For software which is  
copyrighted by the Free Software Foundation, write  
to the Free Software Foundation; we sometimes  
make exceptions for this. Our decision will be  
guided by the two goals of preserving the free  
status of all derivatives of our free software and  
of promoting the sharing and reuse of software  
generally.  
If any portion of this section is held invalid or  
unenforceable under any particular circumstance,  
11ꢄ_ appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 116  
2008-12-04 오전 10:17:48  
Lesser General Public License as published by the  
Free Software Foundation; either version 2.1 of the  
License, or (at your option) any later version.  
no warranty  
15. BECAUSE THE LIBRARY IS LICENSED FREE  
OF CHARGE, THERE IS NO WARRANTY FOR  
THE LIBRARY, TO THE EXTENT PERMITTED BY  
APPLICABLE LAW. EXCEPT WHEN OTHERWISE  
STATED IN WRITING THE COPYRIGHT HOLDERS  
AND/OR OTHER PARTIES PROVIDE THE LIBRARY  
“AS IS” WITHOUT WARRANTY OF ANY KIND,  
EITHER EXPRESSED OR IMPLIED, INCLUDING,  
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES  
OF MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE. THE ENTIRE RISK AS  
TO THE QUALITY AND PERFORMANCE OF THE  
LIBRARY IS WITH YOU. SHOULD THE LIBRARY  
PROVE DEFECTIVE, YOU ASSUME THE COST  
OF ALL NECESSARY SERVICING, REPAIR OR  
CORRECTION.  
This library is distributed in the hope that it will be  
useful, but WITHOUT ANY WARRANTY; without  
even the implied warranty of MERCHANTABILITY  
or FITNESS FOR A PARTICULAR PURPOSE. See  
the GNU Lesser General Public License for more  
details.  
You should have received a copy of the GNU Lesser  
General Public License along with this library; if  
not, write to the Free Software Foundation, Inc., 51  
Franklin Street, Fifth Floor, Boston, MA 02110-1301  
USA Also add information on how to contact you by  
electronic and paper mail.  
You should also get your employer (if you work  
as a programmer) or your school, if any, to sign a  
“copyright disclaimer” for the library, if necessary.  
Here is a sample; alter the names:  
16. IN NO EVENT UNLESS REQUIRED BY  
APPLICABLE LAW OR AGREED TO IN WRITING  
WILL ANY COPYRIGHT HOLDER, OR ANY  
OTHER PARTY WHO MAY MODIFY AND/OR  
REDISTRIBUTE THE LIBRARY AS PERMITTED  
ABOVE, BE LIABLE TO YOU FOR DAMAGES,  
INCLUDING ANY GENERAL, SPECIAL,  
Yoyodyne, Inc., hereby disclaims all copyright  
interest in the library ‘Frob’ (a library for tweaking  
knobs) written by James Random Hacker.  
signature of Ty Coon, 1 April 1990 Ty Coon,  
President of Vice.  
INCIDENTAL OR CONSEQUENTIAL DAMAGES  
ARISING OUT OF THE USE OR INABILITY TO USE  
THE LIBRARY (INCLUDING BUT NOT LIMITED  
TO LOSS OF DATA OR DATA BEING RENDERED  
INACCURATE OR LOSSES SUSTAINED BY  
YOU OR THIRD PARTIES OR A FAILURE OF  
THE LIBRARY TO OPERATE WITH ANY OTHER  
SOFTWARE), EVEN IF SUCH HOLDER OR OTHER  
PARTY HAS BEEN ADVISED OF THE POSSIBILITY  
OF SUCH DAMAGES.  
end oF terms and conditions  
how to apply these terms to your  
new Libraries  
If you develop a new library, and you want it to  
be of the greatest possible use to the public, we  
recommend making it free software that everyone  
can redistribute and change. You can do so by  
permitting redistribution under these terms (or,  
alternatively, under the terms of the ordinary General  
Public License).  
To apply these terms, attach the following notices  
to the library. It is safest to attach them to the start  
of each source file to most effectively convey the  
exclusion of warranty; and each file should have  
at least the “copyright” line and a pointer to where  
the full notice is found. one line to give the library’s  
name and an idea of what it does.  
Copyright (C) year name of author  
This library is free software; you can redistribute  
it and/or modify it under the terms of the GNU  
English _11ꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 117  
2008-12-04 오전 10:17:49  
* LOSS OF USE, DATA, OR PROFITS; OR  
BUSINESS INTERRUPTION)  
openssL License  
* HOWEVER CAUSED AND ON ANY THEORY  
OF LIABILITY, WHETHER IN CONTRACT,  
* STRICT LIABILITY, OR TORT (INCLUDING  
NEGLIGENCE OR OTHERWISE)  
* ARISING IN ANY WAY OUT OF THE USE OF  
THIS SOFTWARE, EVEN IF ADVISED  
* OF THE POSSIBILITY OF SUCH DAMAGE.  
* =============================  
* This product includes cryptographic software  
written by Eric Young  
* Copyright (c) 1998-2006 The OpenSSL  
Project. All rights reserved.  
* Redistribution and use in source and binary  
forms, with or without  
* modification, are permitted provided that the  
following conditions  
* are met:  
* 1. Redistributions of source code must retain  
the above copyright  
*
notice, this list of conditions and the  
* ([email protected]). This product includes  
software written by Tim  
following disclaimer.  
* 2. Redistributions in binary form must  
reproduce the above copyright  
* Hudson ([email protected]).  
*/  
*
notice, this list of conditions and the  
following disclaimer in  
the documentation and/or other materials  
provided with the  
distribution.  
Original SSLeay License  
-----------------------  
*
/* Copyright (C) 1995-1998 Eric Young (eay@  
cryptsoft.com)  
*
* All rights reserved.  
* This package is an SSL implementation  
written  
* by Eric Young ([email protected]).  
* The implementation was written so as to  
conform with Netscapes SSL.  
* This library is free for commercial and non-  
commercial use as long as  
* the following conditions are aheared to. The  
following conditions  
* apply to all code found in this distribution, be  
it the RC4, RSA,  
* lhash, DES, etc., code; not just the SSL code.  
The SSL documentation  
* included with this distribution is covered by  
the same copyright terms  
* except that the holder is Tim Hudson (tjh@  
cryptsoft.com).  
* 3. All advertising materials mentioning features  
or use of this  
*
software must display the following  
acknowledgment:  
“This product includes software developed  
by the OpenSSL Project  
*
*
for use in the OpenSSL Toolkit. (http://www.  
openssl.org/)”  
* 4. The names “OpenSSL Toolkit” and  
“OpenSSL Project” must not be used to  
*
endorse or promote products derived from  
this software without  
prior written permission. For written  
permission, please contact  
[email protected].  
*
*
* 5. Products derived from this software may  
not be called “OpenSSL”  
*
nor may “OpenSSL” appear in their names  
without prior written  
permission of the OpenSSL Project.  
* Copyright remains Eric Young’s, and as such  
any Copyright notices in  
*
* the code are not to be removed.  
* If this package is used in a product, Eric  
Young should be given attribution  
* as the author of the parts of the library used.  
* This can be in the form of a textual message  
at program startup or  
* in documentation (online or textual) provided  
with the package.  
* Redistribution and use in source and binary  
forms, with or without  
* modification, are permitted provided that the  
following conditions  
* are met:  
* 1. Redistributions of source code must retain  
the copyright  
* 6. Redistributions of any form whatsoever  
must retain the following  
*
*
acknowledgment:  
“This product includes software developed  
by the OpenSSL Project  
*
for use in the OpenSSL Toolkit (http://www.  
openssl.org/)”  
* THIS SOFTWARE IS PROVIDED BY THE  
OpenSSL PROJECT ‘‘AS IS’’ AND ANY  
* EXPRESSED OR IMPLIED WARRANTIES,  
INCLUDING, BUT NOT LIMITED TO, THE  
* IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR  
* PURPOSE ARE DISCLAIMED. IN NO EVENT  
SHALL THE OpenSSL PROJECT OR  
* ITS CONTRIBUTORS BE LIABLE FOR ANY  
DIRECT, INDIRECT, INCIDENTAL,  
* SPECIAL, EXEMPLARY, OR  
CONSEQUENTIAL DAMAGES (INCLUDING,  
BUT  
*
notice, this list of conditions and the  
following disclaimer.  
* 2. Redistributions in binary form must  
reproduce the above copyright  
*
notice, this list of conditions and the  
following disclaimer in the  
documentation and/or other materials  
provided with the distribution.  
*
* NOT LIMITED TO, PROCUREMENT OF  
SUBSTITUTE GOODS OR SERVICES;  
11ꢆ_ appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 118  
2008-12-04 오전 10:17:49  
* 3. All advertising materials mentioning features or  
use of this software  
*
*
must display the following acknowledgement:  
“This product includes cryptographic software  
written by  
*
*
Eric Young ([email protected])”  
The word ‘cryptographic’ can be left out if the  
rouines from the library  
being used are not cryptographic related :-).  
*
* 4. If you include any Windows specific code (or a  
derivative thereof) from  
*
the apps directory (application code) you must  
include an acknowledgement:  
*
“This product includes software written by Tim  
Hudson ([email protected])”  
* THIS SOFTWARE IS PROVIDED BY ERIC  
YOUNG ‘‘AS IS’’ AND  
* ANY EXPRESS OR IMPLIED WARRANTIES,  
INCLUDING, BUT NOT LIMITED TO, THE  
* IMPLIED WARRANTIES OF MERCHANTABILITY  
AND FITNESS FOR A PARTICULAR PURPOSE  
* ARE DISCLAIMED. IN NO EVENT SHALL THE  
AUTHOR OR CONTRIBUTORS BE LIABLE  
* FOR ANY DIRECT, INDIRECT, INCIDENTAL,  
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL  
* DAMAGES (INCLUDING, BUT NOT LIMITED TO,  
PROCUREMENT OF SUBSTITUTE GOODS  
* OR SERVICES; LOSS OF USE, DATA, OR  
PROFITS; OR BUSINESS INTERRUPTION)  
* HOWEVER CAUSED AND ON ANY THEORY OF  
LIABILITY, WHETHER IN CONTRACT, STRICT  
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE  
OR OTHERWISE) ARISING IN ANY WAY  
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF  
ADVISED OF THE POSSIBILITY OF  
English _119  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 119  
2008-12-04 오전 10:17:49  
(Waste Electrical & Electronic Equipment)  
Correct Disposal of This Product  
(Applicable in the European Union and other European countries with separate collection systems)  
This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its  
working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from  
other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.  
Household users should contact either the retailer where they purchased this product, or their local government office, for details of where  
and how they can take this item for environmentally safe recycling.  
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be  
mixed with other commercial wastes for disposal.  
Correct disposal of batteries in this product  
(Applicable in the European Union and other European countries with separate battery return systems.)  
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their  
working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive  
2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment.  
To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return  
system.  
AB68-00769B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
00769B_SHR-8162_ENG-NEW.indb 120  
2008-12-04 오전 10:17:49  

Realistic Car Satellite TV System 20 110 User Guide
Riccar Vacuum Cleaner RSL1A User Guide
Roland Speaker DS 50A User Guide
Rosewill Network Router RNX N250PC2 User Guide
Samsung Cable Box DCB H360R User Guide
Samsung Cell Phone E2510 User Guide
Samsung Computer Monitor 20080310201909625 User Guide
Schwinn Motor Scooters Mobility Aid 50GR06BL User Guide
Seagate Computer Drive STCD500100 User Guide
Sennheiser Headphones HD 228 User Guide