Quick Setup Guide
1 EZ Record
HDD & DVD RECORDER
DVD-893M/895M/897M
2 Getting Connected
3 DTV Functions
4 Basic Operation
1 EZ Record
Recordable Discs
DVD-RAM/ RW/ R
This function allows you Initialise and Finalise a disc automatically.
(Refer to page 48 of the Instruction Manual for more information.)
1. With the unit in Stop mode, press the MENU button.
2. Press the ꢀꢁ buttons to select Setup, then press the OK or
►
button.
3. Press the ꢀꢁ buttons to select Recording, then press the OK or
►
►
button.
button.
4. Press the ꢀꢁ buttons to select EZ Record, then press the OK or
5. Press the ꢀꢁ buttons to select On, then press the OK or
►
button.
Press the EXIT button to exit the menu.
6. Insert a disc.
If the disc is new, it is initialised to V mode automatically. (DVD-RW only)
7. Press the REC button.
2 Getting Connected
Select one of the following three types of connections :
The VHF/UHF RF OUT jack of this product sends only signals received through the antenna.
It does not output audio/video signals.
You must use one of the following connections on this unit.
Antenna + HDD & DVD Recorder + TV
AV amplifier (receiver) ▼
You can connect your HDD & DVD Recorder to the
television using the SCART cable if the appropriate input is
available on the television. You thus:
•
•
Obtain better quality sound and pictures
Simplify the setting up procedure of your HDD & DVD Recorder
Connect the RF cable as shown.
OR
Connect one end of the SCART cable to the AV1 jack
on the rear of the HDD & DVD Recorder. Also use the
Video/Audio Cable to connect AUDIO OUT(R/L)/VIDEO
OUT jacks on the HDD & DVD Recorder to the Audio &
Video jacks on the TV.
To RF IN
•
For the best picture quality, if your TV has Component
video jacks, you can use component cables instead of
the yellow video connector on the Video/Audio cable. If
your TV has a HDMI or DVI jack, you can use the HDMI
or HDMI-DVI cable instead of the yellow video
connector on the Video/Audio cable.
To RF OUT
RF Cable
▲ HDD & DVD Recorder
OR
OR
OR
If you have an AV amplifier
Connect either audio cables from the AUDIO OUT(R/L) jacks on
the HDD & DVD Recorder to the AUDIO IN jacks on your AV
amplifier, or a digital cable from the DIGITAL AUDIO OUT
(OPTICAL) jack on the HDD & DVD Recorder to the DIGITAL
AUDIO IN jack on your AV amplifier.
To ANT INPUT
▲ TV
English-1
C Samsung Electronics
Download from Www.Somanuals.com. All Manuals Search And Download.
1. With the unit in Stop mode, press the MENU button.
2. Press the ꢀꢁ buttons to select “Disc Manager”, then
3 DTV Functions
press the OK or
►
button.
3. Press the ◄ ► buttons to select “Format”, then press
Display Screen
the OK button.
HDD/DVD-RAM/DVD+RW
After the television channels have been stored, you will see the
following picture(banner) each time you switch channels.
•
You will be prompted with the confirmation message
“Current media : Do you want to format?”.
Press the ◄ ► buttons to select “Yes”, then press the
OK button.
***
◆
Banner Elements
1. Displays the favorite channel.
2. Displays the teletext.
3. Displays the subtitle.
DVD-RW
•
You will be prompted with the confirmation message
“Choose the recording format for DVD-RW”.
Press the ◄ ► buttons to select the desired format
type, then press OK button. “All data will be deleted.
Do you want to continue?” is displayed.
4. Displays the multi audio.
HDD
DTV
TF1
001
4. Press the ◄ ► buttons to select “Yes”, then press the
OK button.
The disc is formatted.
■ The icon is displayed according to the service
information of signal.
Recording the current TV programme
you are watching
■ The icon is displayed only with more than one audio type
and language.
1. Press the HDD or DVD button.
■ By pressing the button, you can see the detailed
information.
If you select DVD, Press the OPEN/CLOSE button
and place a recordable disc on the disc tray.
2. Press the OPEN/CLOSE button to close the disc tray.
Wait until “LOAD” disappears from the front panel
display.
Guide
The electronic programme guide gives you a channel list
for the channels.
3. Press the PROG (
) or Number buttons to select
the current programme you want to record.
1. With the unit in Stop mode, press the MENU button.
4. Press the REC MODE button repeatedly, (or press the
REC MODE button and then press the ꢀꢁ buttons)
to select the recording speed (quality).
2. Press the ꢀꢁ buttons to select Guide, then press the
OK or
►
button.
•
Press the GUIDE button while you are viewing a
programme. (DTV)
§SP§LP§EP§XP
•
RED(A) button (Timer Record) : Setting the Timer
Record.
Record Mode
SP (02:12)
•
•
(
$
) button : Go to next day
(#
) button : Go to previous day
It displays programme from now to 7 days after.
➝
• DVD-SH893M
HDD(160GB)
• ꢀꢁ◄ ► button : select the programme and
station.
XP(High,approx. 33 hours) ➝ SP(Standard,approx. 67
hours) ➝ LP(Low,approx. 133 hours) ➝
EP(Extended,approx. 199 hours/264 hours) ➝
FR(Flexible,approx. 33~264 hours)
•
INFO button (Information) : View the detail information
• DVD-SH895M
HDD(250GB)
4 Basic Operation
XP(High,approx. 53 hours) ➝ SP(Standard,approx.
106 hours) ➝ LP(Low,approx. 211 hours) ➝
EP(Extended,approx. 316 hours/421 hours) ➝
FR(Flexible,approx. 53~421 hours)
Formatting a Disc
When you insert an unused disc, the following message
appears. Since available functions differ depending on the
disc type, select a disc that best fits your preferences.
• DVD-SH897M
HDD(320GB)
XP(High,approx. 68 hours) ➝ SP(Standard,approx.
135 hours) ➝ LP(Low,approx. 270 hours) ➝
EP(Extended,approx. 405 hours/534 hours) ➝
FR(Flexible,approx. 68~534 hours)
DVD-RAM/DVD+R : Formatting will be started
automatically.
DVD+RW : Use after formatting the disc.
DVD-RW : Use after initializing the disc. If you want to
change the V or VR mode, refer to "Formatting a
Disc" on the Instruction Manual.
DVD
XP(High,approx. 1 hour) ➝ SP(Standard,approx. 2
hours) ➝ LP(Low,approx. 4 hours) ➝
EP(Extended,approx. 6 hours/8 hours) ➝
FR(Flexible,approx. 1~8 hours)
DVD-R : Formatting disc is unnecessary and only
Video Mode Recording is supported.
English-3
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Press the REC button.
Finalising a Disc
Information concerning the channel being recorded is
displayed on the screen and then recording begins.
Icon (● REC) is displayed on the front panel.
After you record titles onto a DVD-RW/ R disc with your
HDD & DVD Recorder, it needs to be finalised before it can
be played back on external devices.
To stop recording
1. With the unit in Stop mode, press the MENU button.
Press the STOP ( ) button to stop or finish a recording in progress.
2. Press the ꢀꢁ buttons to select “Disc Manager”, then
press the OK or
►
button.
Making a Timer Recording
3. Press the
DVD-RW(VR)
Disc Manager
ꢀꢁ◄ ► button
to select
“Finalise”, then
press the OK
button.
1. Press the OPEN/CLOSE button, place a recordable
Disc Name
Used Space
Available Space
00:17
(
0.52 GB)
3.85 GB)
disc on the disc tray.
01:54 SP
(
2. Press the OPEN/CLOSE button to close the disc tray.
Disc Protection Info
Current Rec. Mode
Not Protected
VR-Mode
Wait until “LOAD” disappears from the front panel display.
Rename
You will be
3. With the unit in Stop mode, press the TIMER button.
Protection
Delete All
Finalise
Format
prompted with
the message
“Do you want
to finalise
< MOVE
sSELECT
rRETURN
eEXIT
4. Press the ꢀꢁ button to select the Scheduled List
,
then press the OK or
►
button.
DVD-RW(VR)
Disc Manager
5. Press the OK
HDD
Scheduled List
disc?”.
button to select
“Add a list”.
The Timer
Current Time 10:54
Disc Name
No.
To
Source Date
Start
End
Mode
PDC
Used
Avai
If you select
"Yes", you will
be prompted
again with the
message “Disc
will be finalised.
Do you want
to continue?”.
Add a list
Do you want to finalise disc?
Disc
Curr
Record Input
items (Date/
Time etc.) are
displayed.
Fill in the items
using the ꢀꢁ◄
► and number
buttons.
No
Yes
Rename
Protection
Delete All
Finalise
Format
Recordable Time HDD 69:30 SP
Recorded List
rRETURN eEXIT
< MOVE
sSELECT
rRETURN
eEXIT
< MOVE
sSELECT
HDD
Scheduled List
Current Time 10:54
4. Press the ◄ ► buttons to select “Yes”, then press the
No.
To
Source Date
Start
End
Mode
PDC
OK button.
No.01 No Title
To
Source
AV
Date
Start
12:00
End
Mode
PDC
The disc is finalised.
6. After selecting
the set up
HDD
1
JAN 01
14:00
SP
Off
• Once a disc is finalised, you cannot delete entries
from the record list.
Recordable Time HDD 69:30 SP
Recordable Time HDD 69:30 SP
Title
s
Save
value for each
mode, press
the OK button
to select
Recorded List
eEXIT
•
•
•
•
•
After being finalised, the DVD R/DVD-RW(V-mode)
operates in the same manner as a DVD-Video.
Depending on the disc type, the displayed screen
may be different.
Finalising time may be different depending on the
amount of data recorded on the disc.
Data on the disc will be damaged if the recorder is
powered off during finalisation process.
< MOVE
sSELECT
rRETURN
“Save”.
7. Turn the power off to finish the Timer Recording setting.
Timer Recording will not work when the power is on.
Anynet+(HDMI CEC)
You can finalise the disc automatically using
EZ Record. Refer to page 48 of the Instruction
Manual for more information
Anynet+ is a function that can be used to operate the
recorder using a Samsung TV remote control, by
connecting the HDD & DVD RECORDER to a SAMSUNG
TV using an HDMI Cable. (This is only available with
SAMSUNG TVs that support Anynet+.)
Disc compatibility
•
Not all brands of discs will be compatible with this unit.
1. With the unit in Stop mode, press the MENU button.
2. Press the ꢀꢁ buttons to select Setup, then press the
OK or
►
button.
3. Press the
System
ꢀꢁ buttons
to select
System,
HDD
Library
Auto Power Off
Power Save
: Off
: Off
►
►
Guide
Channel
Anynet+ (HDMI CEC)
Off
then press
On
DVB-T Auto Subtitle
✔
Timer Record
Touch Key Sound
: Off
►
►
the OK or
►
Disc Manager
Setup
DivX(R) Registration
button.
4. Press the
m MOVE
sSELECT
rRETURN
eEXIT
ꢀꢁ buttons
to select Anynet+ (HDMI CEC), then press the OK or
button. Anynet+ (HDMI CEC) items will be
►
displayed.
5. Press the ꢀꢁ buttons to select On, then press the OK
or
►
button.
English-4
AK68-01594B
Download from Www.Somanuals.com. All Manuals Search And Download.
|