00115A DVD-V77MS-GB1 10/25/02 10:43 AM Page 1
DVD-VCR
DVD-V77MS
Instruction Manual
1
4
7
2
5
8
0
3
6
9
A
N
G
L
E
A
U
DO
I
OPEN/CLOSE
EJECT
STANDBY/ON
SELECT
VIDEO
COPY
MEMORY STICK
L
AUDIO
2
R
PRPG
REC
LINE IN
PAL
Download from Www.Somanuals.com. All Manuals Search And Download.
00115A DVD-V77MS-GB1 10/25/02 10:43 AM Page 4
Contents (cont.)
Safety Instructions
GB
GB
◆ MEMORY STICK
The following illustrations represent precautions.
◆
◆
◆
◆
◆
◆
◆
◆
Memory Stick................................................................................................. 63
DAM (Digital Audio Manager) Playback ........................................................ 67
Memory Stick Pull out.................................................................................... 68
DPM (Digital Photo Manager) Playback........................................................ 68
Slide Show..................................................................................................... 70
Slide Show Order .......................................................................................... 71
Photo View .................................................................................................... 72
Edit Photo...................................................................................................... 73
The lightning bolt is a warning sign alerting you to dangerous voltage inside the product.
DO NOT OPEN THE DVD-VCR. Refer to service personnel.
◆ SOLVING PROBLEMS
10%
75%
40°C
◆
◆
◆
◆
MP3 Play (CD-R MP3 disc requirements)..................................................... 74
H
H
5°C
Technical Specifications .............................................................................. 75
Problems and Solutions (VCR)...................................................................... 76
Troubleshooting Guide (DVD) ....................................................................... 77
Do NOT expose the DVD-VCR
to extreme temperature condi-
tions (below 5°C and above
40°C) or to extreme humidity
conditions (less than 10% and
more than 75%).
Do NOT expose the DVD-VCR
to direct sunlight.
Do NOT expose the DVD-VCR
to any liquids.
This product incorporates copyright protection technology that is protected by
method claims of certain U.S. patents and other intellectual property rights owned
by Macrovision Corpration and other rights owners. Use of this copyright protection
technology must by authorized by Macrovision Corporized by Macrovision
Corporation, and is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
Symbols
Do NOT place any objects on
the DVD-VCR or remote
control.
During a storm and/or light-
ning, unplug the DVD-VCR
from the mains socket and
aerial.
If the remote control is not
used for a long period of time,
remove the batteries and store
it in a cool, dry place.
1
1
◆
◆
Press/push
Hold down
Important
Note
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL
ENVIRONMENTS
= Step number
1
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
00115A DVD-V77MS-GB1 10/25/02 10:43 AM Page 6
Disc Type and Characteristics
Front View of the DVD-VCR
GB
GB
This DVD player is capable of playing the following types of discs with the corresponding logos :
VIDEO CASSETTE
COMPARTMENT
DVD/VCR SELECT
BUTTON
EJECT
BUTTON
DVD DECK
OPEN/CLOSE
BUTTON
STANDBY/ON
BUTTON
COPY
BUTTON
Max.
Playing
Time
Disc Types
(Logos)
Recording
Types
Disc Size
Characteristics
Single-sided
240 min.
Double-sided
480 min.
DVD
• DVD contains excellent sound
and video due to Dolby Digital
and MPEG-2 system.
• Various screen and audio
functions can be easily selected
through the on-screen menu.
OPEN/CLOSE
EJECT
12 Cm
Audio
+
Video
STANDBY/ON
SELECT
VIDEO
COPY
Single-sided
80 min.
Double-sided
160 min.
MEMORY STICK
L
AUDIO
2
R
PRPG
REC
8 Cm
12 Cm
8 Cm
LINE IN
VIDEO-CD
AUDIO-CD
74 min.
20 min.
74 min.
20 min.
• Video with CD sound, VHS
quality & MPEG-1 compression
technology.
STOP
BUTTON
Audio
+
Video
MEMORY
STICK
PROGRAMME
SELECTION
BUTTONS
LINE IN 2 VIDEO LINE IN 2 AUDIO
INPUT JACK L, R INPUT JACK
REW/SKIP BACK PLAY/PAUSE F.F/SKIP NEXT
BUTTON
BUTTON BUTTON
RECORD
BUTTON
• An LP is recorded as an analog
signal with more distortion. CD
is recorded as a Digital Signal
with better audio quality, less
distortion and less deterioration
of audio quality over time.
12 Cm
8 Cm
Audio
Rear View of the DVD-VCR
* DO NOT play CD-ROM, CD-I and DVD-ROM in this player!
(CDGs play audio only, not graphics.)
* The may not operate depending on the disc.
DVD & VCR
DVD Only
Disc Markings
DIGITAL
~
STEREO
SOUND
PAL
NTSC
• Playback
Region
Number
• PAL colour
• Dolby
Digital disc
• Stereo
disc
• Digital
Audio disc
• DTS disc
• NTSC broadcast
system in USA,
Canada, japan,
South Korea, etc.
system in U.K,
France, Germany,
Austrailia etc.
1
2
3
4
5
6
7
8
9
1
2
3
4
RF ANTENNA INPUT
RF OUT TO TV
5
AUDIO LINE OUT
(S-VIDEO OR COMPONENT)
COMPONENT VIDEO OUT
DIGITAL AUDIO OUT(COAXIAL)
DIGITAL AUDIO OUT(OPTICAL)
S-VIDEO OUT
Playback Region Number
LINE OUT TO TV (COMPOSITE)
LINE IN 1
6
7
8
9
Both the DVD player and the discs are coded by region. These regional codes must match in order for the
disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is described on the rear panel of the player.
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
00115A DVD-V77MS-GB1 10/25/02 10:43 AM Page 8
Infrared Remote Control
Display Indicators
GB
GB
1
2
3
4
5
6
7
8
9
STANDBY/ON
TV MUTE, ZOOM
0-9
1
2
3
4
5
6
7
18
1
ANGLE
VOLUME +/-
MEMORY STICK
DVD, VCR, TV
REWIND, SKIP BACK
STOP
19
2
3
COPY
TITLE
CHAP
1
4
2
5
8
0
3
6
STEREO
11
10 DISPLAY
11 CLOCK/COUNTER
12 UP
13 LEFT
14 RECORD
15 SUBTITLE, TIMER
16 TITLE, SPEED
17 3D SOUND
18 OPEN/CLOSE
19 Feature unavailable on this
model
7
9
8
9
10
12 13
ANGLE
AUDIO
4
5
6
20
1
2
The DVD Deck is active
8
9
3D Sound is active
A DVD with a DTS soundtrack is loaded
The status of the DVD deck is graphically
displayed
21
22
10 The number to the right of the “CHAP” symbol is
the current title number
3
4
The number to the right of the “TITLE” symbol is
the current title number
11 The current TV show or video is broadcast in
7
Stereo
20 AUDIO
The time, counter position, time remaining or
current deck status is displayed
21 PROG/TRK
22 INPUT SEL.
A.TRK
23 FAST-FORWARD
SKIP NEXT
24 PLAY/STILL
25 CLEAR
26 DISC MENU
27 RIGHT
12 A Timer Recording is programmed or in progress.
23
24
25
8
9
10
5
6
The status of the VCR deck is graphically displayed
13 DVD to VHS copy is in progress
Recording is in progress and blinks when the VCR
is in PAUSE mode
26
11
12
7
The VCR Deck is active
27
28
13
28 DOWN
14
29 RETURN, A.DUB
30 MODE, REPEAT
31 MARK, INDEX
32 SCREEN FIT, SVHS
33 JOG DIAL
29
30
31
15
16
Accessories
32
17
34 SHUTTLE DIAL
33
34
You have just purchased a SAMSUNG Video Cassette Recorder (DVD-VCR).
Together with your DVD-VCR, you will find the following accessories in the box.
REMOTE CONTROL
& BATTERIES
AUDIO & VIDEO
CABLE
OWNER’S
INSTRUCTIONS
COAXIAL CABLE
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
00115A DVD-V77MS-GB1 10/25/02 10:43 AM Page 10
Deciding How to Connect DVD-VCR
Connecting DVD-VCR to the TV using the Coaxial Cable
GB
GB
To receive television programmes a signal must be received from
one of the following sources:
◆
◆
◆
◆
An outdoor aerial
You must take into account various factors when connecting audio or video systems:
DVD & VCR
An indoor aerial
◆
◆
Types of connectors available on your systems
A cable television network
A satellite receiver
Systems connected permanently to the DVD-VCR (satellite receiver for example) or
temporarily (camcorder for example)
2
◆
Make sure that both the television and the DVD-VCR are
switched off before connecting the cables.
Your DVD-VCR is equipped with the following connectors.
1
2
Remove the aerial or network input cable from the television.
Connect this cable to the 75Ω coaxial socket marked
on the
Connector
Location
Type
Direction
Recommended Use
rear of your DVD-VCR.
DVD & VCR
TV
TV
3
4
5
Plug the coaxial cable supplied into the
DVD-VCR.
socket on your
LINE
Rear
Audio/Video RCA In/Out
◆ Television
◆ Other VCR
Plug the other end of the coaxial cable into the connector
previously used for the aerial on the television.
4
3
To obtain better quality pictures and sound on your television, you
can also connect your DVD-VCR to the television via the RCA
cable (see section below) if your television is equipped with this
type of connection.
Audio output
Rear
Audio RCA
Out
◆ Audio out (DVD only)
COMPONENT Rear
output
RCA
Out
Out
◆ COMPONENT out (DVD only)
Connecting DVD-VCR to the TV using the RCA Cable
Aerial
S-VIDEO
output
Rear
S-JACK
◆ S-Video out (DVD only)
TV
DVD & VCR
Digital AUDIO Rear
output
Optical
coaxial
Out
Out
In
◆ Digital Audio out (DVD only)
3
2
OUT TO TV
Rear
75 Ω
◆ Television
RF coaxial cable
coaxial
You can connect your DVD-VCR to the television using the RCA cable if the appropriate input is available
on the television. You thus:
IN FROM ANT. Rear
75 Ω
◆ Aerial
◆
◆
Obtain better quality sound and pictures
coaxial
◆ Cable television network
◆ Satellite receiver
Simplify the setting up procedure of your DVD-VCR
◆
◆
◆
Regardless of the type of connection chosen, you must always connect the coaxial cable supplied.
Otherwise, no picture will be visible on the screen when the DVD-VCR is switched off.
Make sure that both the television and the DVD-VCR are switched off before connecting the cables.
◆
Whenever you connect an audio or video system to your DVD-VCR, ensure that all elements
are switched off.
Refer to the documentation supplied with your equipment for detailed connection instructions
and associated safety precautions.
1
2
Connect the coaxial cable as indicated in the above section.
Connect one end of the RCA Audio/Video cable to the Video output and Audio L, R output socket on the rear
of the DVD-VCR.
3
Plug the other end into the appropriate connector on the television.
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
00115A DVD-V77MS-GB1 10/25/02 10:43 AM Page 12
Connecting Other Equipment to Your DVD-VCR
Plug & Auto Set Up
GB
GB
Your DVD-VCR will automatically set itself up when it is plugged
into the mains for the first time. TV stations will be stored in
memory. The process takes a few minutes. Your DVD-VCR will
then be ready for use.
You can connect other audio and/or video equipment to your DVD-VCR in different ways. The following
illustrations give a few examples of the connection possibilities.
TV
DVD
&
VCR
◆
The RCA input/output connectors on the rear of the DVD-VCR are used for equipment,
such as camcorders, VCRs or sound systems.
1
2
3
4
Connect the coaxial cable as indicated on page 11.
(Connecting Your DVD-VCR to the TV Using the Coaxial Cable)
Plug the DVD-VCR into the mains.
Result:
The select menu language menu is displayed.
Camcorder
Select the required language by pressing the number buttons.
Result: A message appears.
Press ENTER to start the auto scanning.
2
◆
The number of stations automatically stored by the DVD-VCR
depends on the number of stations that it has found.
VCR
5
On completion, press RETURN twice to exit the menu.
REAR OF THE DVD-VCR
◆◆ Auto preset can be performed by pressing (STOP) on the
DVD-VCR continuously for 5 seconds or more with no tape
inserted.
Sound system
◆
AUTO SET UP
PLEASE WAIT
60%
I◆◆◆◆◆◆◆◆◆◆◆◆-------I
RETURN
CLOCK SET
12:00
1/JAN/2002
TUE
➛ꢀ❿ꢀꢀꢀꢁ❷
RETURN
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
00115A DVD-V77MS-GB1 10/25/02 10:43 AM Page 14
Tuning Your Television for the DVD-VCR
Deck Control Keys
GB
GB
The DVD-VCR uses one set of controls to operate both decks. The
following keys are helpful in successfully controlling each deck.
You must tune your television for the DVD-VCR only if you are not
using a RCA cable
1
2
STANDBY/ON Button
◆
To view pictures from your DVD-VCR when a RCA cable
is used, the television must be set to the audio/video
mode (AV).
Press the STANDBY/ON button on the remote control or front
panel to turn on the DVD-VCR.
DVD Button
STANDBY/ON
2
Press the DVD button on the remote control when you want to
1
control the DVD deck.
1
2
Switch on the television.
MEMORY STICK
1
◆ The DVD indicator will light on the Front Panel Display to show
that the DVD deck is selected.
1
2
3
1
2
Switch on the DVD-VCR by pressing STANDBY/ON on the front of
the DVD-VCR or STANDBY/ON on the remote control.
3
4
VCR Button
Press the VCR button on remote control when you want to control
3
4
Select a programme position on the television to be reserved for
use with your DVD-VCR.
the VCR deck.
◆ The VCR indicator will light on the Front Panel Display to show
that VHS deck is selected.
Insert the video cassette in the DVD-VCR. Check that the
4
2
3
DVD-VCR Toggle
Press the SELECT button on the front panel to toggle control
between the DVD deck and the VCR deck.
DVD-VCR starts reading the cassette; if not, press
.
button
❿
II
5
6
7
Start a scan on your television or set the television to UHF
channel 36 (Australia:UHF 38 CH).
Fine tune the television until the pictures and sound are obtained
clearly.
◆
Before using the VCR operation of 19~44 pages, press
the VCR button on the remote control to select VCR
mode.
If you cannot find the pictures and sound, or there is interference
from nearby channels, it may be necessary to change the setting
of the DVD-VCR output channel (see Setting the DVD-VCR
Output Channel on page 23 and Problems and Solutions on page
76).
EJECT
Before using the DVD operation of 45~73 pages, press
the SELECT button on the remote control to select and
watch DVD.
SELECT
VIDEO
COPY
L
AUDIO
2
R
PRPG
REC
4
8
When the picture and sound are perfectly clear, store this channel
at the desired programme position on the television.
LINE IN
Result:
That programme is now reserved for use with your
DVD-VCR.
14
15
Download from Www.Somanuals.com. All Manuals Search And Download.
00115A DVD-V77MS-GB1 10/25/02 10:43 AM Page 16
Copying from DVD to VCR
Inserting Batteries in the Remote Control
GB
GB
You must insert or replace the batteries in the remote control when
you:
The DVD-VCR allows you to copy the contents of a DVD to a VHS
tape with a press of the COPY button.
◆
◆
Purchase the DVD-VCR
Find that the remote control is no longer working
correctly
If the DVD you are attempting to copy is copy
protected, you will not be able to copy the disc. It is not
permitted to copy Macrovision® encoded DVDs.
OPEN/CLOSE
STANDBY/ON
1
2
Push the tab in the direction of the arrow to release the battery
compartment cover on the rear of the remote control.
1
MEMORY STICK
PRPG
1
1
Insert Disc
Insert the disc you wish to copy in the DVD deck and close the
drawer.
Insert two AA, R6 or equivalent batteries, taking care to respect
the polarities:
◆
+ on the battery with + on the remote control
– on the battery with – on the remote control
2
3
Insert VHS Tape
◆
Insert a blank VHS videotape into the VCR deck.
3
Replace the cover by aligning it with the base of the remote
control and pushing it back into place.
Copy the DVD to VHS Tape
OPEN/CLOSE
EJECT
Press the COPY button on the DVD-VCR front panel.
◆ The DVD will go into Play mode and the VCR will go into Record
mode.
SELECT
VIDEO
COPY
PRPG
REC
L
AUDIO
2
R
LINE IN
2
◆
Do not mix different battery types (manganese and
alkaline for example).
◆ If the DVD disc menu appears, you may need to press the PLAY
button manually to begin copying.
4
Stop the Copy Process
When the DVD is finished playing, press the VCR button on the
remote control and then press the STOP button to end the copy.
◆ You must stop the Copy process manually when the DVD movie
ends or the DVD may replay and record over and over again.
EJECT
Setting the Date and Time
SELECT
VIDEO
COPY
You must set the date and time when:
3
L
AUDIO
R
RPG
REC
◆
You purchase the DVD-VCR
Enter
Return
LINE IN
2
1
2
Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
DVD Setup
VCR Setup
Language
Parental
DVD
Clock Set
Installation
Press the corresponding
option.
ꢁ,
❷
buttons to select the VCR Setup
Tape Select
Repeat play
OSD
E180
OFF
Option
ON
Program
3
4
Press the ENTER button to select this option.
4
Press the corresponding
menu.
ꢁ,
❷
buttons to select the Clock Set
4
5
6
7
Press the ENTER button to select this menu.
Result: The Clock Setmenu is displayed.
CLOCK SET
12:00
1/JAN/2002
TUE
Press
➛
or
❿
to select the hour, minutes, day, month and year.
Result: The option selected flashes.
Press the
Result: The day of the week is displayed automatically.
You can hold the or buttons down to scroll more
quickly through the values.
ꢁ
or
❷
buttons to increase or decrease the value.
➛ꢀ❿ꢀꢀꢀꢁ❷
RETURN
◆
ꢁ
❷
8
On completion, press RETURN to exit the menu.
16
17
Download from Www.Somanuals.com. All Manuals Search And Download.
00115A DVD-V77MS-GB1 10/25/02 10:43 AM Page 18
Menu Language
GB
1
2
Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
Set “Language”
Using the Up/Down(
ꢁ/❷), move the selection arrow to Language
Option then press ENTER button.
1
3
4
Set “Player Menu”
Using the Up/Down(
ꢁ/❷), move the selection arrow to Player
Menu then press ENTER button.
Enter
Set Player Menu Language
Move the selection bar to your desired Language, then press
Return
DVD Setup
VCR Setup
Language
Parental
DVD
ENTER button.
Player Menu
Disc Menu
English
English
Audio
English
Subtitle
Automatic
Option
Program
Enter
Return
DVD Setup
VCR Setup
Language
Parental
Option
Player Menu
Program
18
Download from Www.Somanuals.com. All Manuals Search And Download.
00115A DVD-V77MS-GB2 10/25/02 10:46 AM Page 19
VCR
Presetting the Stations Automatically
GB
Enter
☛
You do not need to preset the stations if you have already
set them automatically (see Plug & Auto Set Up on
page 13).
Return
DVD Setup
VCR Setup
Language
Parental
DVD
Clock Set
Installation
Your DVD-VCR contains a built-in tuner used to receive television
broadcasts.
Tape Select
Repeat play
OSD
E180
OFF
ON
Option
You must preset the stations received through the tuner. This can
be done:
Program
☛
☛
☛
Plug & Auto Set up (see page 13)
Automatically
Manually (see page 20)
Australia Model
You can store up to 80 stations.
INSTALLATION
1
2
Press the SETUP button on the remote control.
Result: The MAIN MENU is displayed.
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH38
Press the corresponding
option.
",
❷
buttons to select the VCR Setup
3
4
Press the ENTER button to select this option.
"❷ꢀꢀꢀꢀ
RETURN
ENTER
Press the corresponding
",
❷
buttons to select the
Installationmenu.
Newzealand Model
5
6
Press the ENTER button to select this menu.
Result: The INSTALLATION menu is displayed.
INSTALLATION
Press the corresponding
UPoption is selected.
And then press the ENTER button to select this option.
"
or
❷
buttons, until the AUTO SET
AUTO SET UP
MANUAL SET UP
TV SYSTEM
:G
Result:
A message appears, indicating that any channels
already preset on your DVD-VCR will be deleted.
VCR OUTPUT CH :CH36
"❷ꢀꢀꢀꢀ
RETURN
ENTER
7
Press ENTER to start the auto scanning.
Result:
☛
☛
☛
☛
The PLEASE WAIT indication flashes on the
television screen.
The first frequency band is scanned and the first
station found is displayed and stored.
The DVD-VCR then searches for the second station
and so on.
YOUR DATA WILL BE LOST
When the automatic scanning procedure has
finished, the DVD-VCR switches automatically to
programme 1.
PRESS ENTER TO CONTINUE
RETURN TO EXIT
☛
The number of stations automatically stored by the DVD-
VCR depends on the number of stations that it has found.
8
If you wish to cancel the auto scanning before the end, press the
RETURN button times to exit the menu.
AUTO SET UP
PLEASE WAIT
☛
☛
Once the auto scanning procedure has finished, some
stations may have been stored more than once; select
the stations with the best reception and delete the
ones no longer required (see page 21).
2%
I--------------------I
RETURN
19
Download from Www.Somanuals.com. All Manuals Search And Download.
00115A DVD-V77MS-GB2 10/25/02 10:46 AM Page 20
VCR
VCR
Presetting the Stations Manually
Clearing a Preset Station
GB
GB
☛
You do not need to preset the stations manually if you
have already set them automatically.
If you have stored a TV station:
Enter
☛
☛
That you do not require
1
2
Press the SETUP button on the remote control.
Result: The MAIN MENU is displayed.
Return
Enter
DVD Setup
DVD
At the wrong programme position
Return
VCR Setup
Language
Parental
Clock Set
Press the corresponding
option.
",
❷
buttons to select the VCR Setup
DVD Setup
VCR Setup
Language
Parental
DVD
Installation
you can cancel it.
Clock Set
Tape Select
Repeat play
OSD
E180
Installation
OFF
Option
3
4
Press the ENTER button to select this option.
Tape Select
Repeat play
OSD
ON
E180
OFF
ON
Program
Option
1
2
Press the SETUP button on the remote control.
Press the corresponding
",
❷
buttons to select the
Program
Installationmenu.
Press the corresponding
option.
",
❷
buttons to select the VCR Setup
5
6
7
Press the ENTER button to select this menu.
Result: The INSTALLATION menu is displayed.
Australia Model
3
4
Press the ENTER button to select this option.
Australia Model
Press the corresponding
UPoption is selected.
"
or
❷
buttons, until the MANUAL SET
Press the corresponding
Installationmenu.
",
❷
buttons to select the
INSTALLATION
Press the ENTER button to select a MANUAL SET UPoption.
AUTO SET UP
MANUAL SET UP
INSTALLATION
Result:
The TV STATION TABLEmenu is displayed.
5
6
7
8
9
Press the ENTER button to select this menu.
Result: The INSTALLATION menu is displayed.
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH38
8
9
Press the
required.
"
or ❷ buttons to select a programme number as
VCR OUTPUT CH :CH38
Press the corresponding
UPoption is selected.
"
or
❷
buttons, until the MANUAL SET
Press the ❿ꢀbutton to preset the station.
Result: The MANUAL TUNINGmenu is displayed.
"❷ꢀꢀꢀꢀ
RETURN
ENTER
"❷ꢀꢀꢀꢀ
RETURN
ENTER
Press the ENTER button to select this option.
Result: The TV STATION TABLEmenu is displayed.
10 Press the
➛
or ❿ buttons to start scanning.
Result:
The frequency band is scanned and the first station
found is displayed.
Newzealand Model
Press the corresponding
TV station is selected. (PR
"
or
❷
buttons, until the required preset
Newzealand Model
11 Press the
"
or
❷
buttons until the NAMEis selected.
)
The station name is set automatically from the broadcast signal.
INSTALLATION
12 To change the programme’s name, press the ❿ꢀbutton.
Press the CLEAR button.
AUTO SET UP
MANUAL SET UP
TV SYSTEM
INSTALLATION
Result:
The first letter of the name flashes.
AUTO SET UP
MANUAL SET UP
TV SYSTEM
:G
10 Repeat the same procedure from Step
8
onwards until all the
13 To...
Then...
VCR OUTPUT CH :CH36
required stations have been cleared.
:G
Select a character
in the name
Press the
required character is displayed
(letters, numbers or “-” character).
"
or
❷
button until the
VCR OUTPUT CH :CH36
"❷ꢀꢀꢀꢀ
11 On completion, press the RETURN button to exit the menu.
RETURN
ENTER
"❷ꢀꢀꢀꢀ
RETURN
ENTER
Move to the next or
previous character
Press the
respectively.
❿
or
➛
buttons
TV STATION TABLE
14 If you...
Then...
PR
CH
NAME
TV STATION TABLE
1
2
3
4
5
Wish to store the
station displayed
☛ Press the
is selected.
☛ Press the
picture, if necessary.
☛ Press ENTER to store the station
"
or ❷ꢀbuttons until the MFT
PR
CH
003
NAME
1
2
3
4
5
➛
or buttons to adjust the
❿
"❷
❿ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
SWAPPING:ENTER
DELETE:CLEAR
RETURN
"
❷
❿ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
SWAPPING:ENTER
DELETE:CLEAR
Do not wish to
store the station
displayed
☛ Press the
CH is selected.
☛ Press the or
"
or
❷
buttons until the
RETURN
➛
❿
buttons to go on
scanning the frequency band and display
the next station
☛ Go back to the beginning of Step 14
MANUAL TUNING
PR
:
CH
: ---
MFT
NAME
:
-
15 Repeat this procedure from Step
8
onwards, until all the required
: ----
stations have been stored.
16 On completion, press the RETURN button to exit the menu.
"❷ꢀꢀꢀ➛❿ꢀꢀꢀ
MEMORY:ENTER
RETURN
☛
You do not need to preset the stations manually if you
have already set them automatically.
20
21
Download from Www.Somanuals.com. All Manuals Search And Download.
00115A DVD-V77MS-GB2 10/25/02 10:46 AM Page 22
VCR
VCR
Changing the Preset Station Table
Setting the DVD-VCR Output Channel
GB
GB
Your DVD-VCR output channel may need to be changed if the
pictures suffer from interference or if your TV cannot find the
pictures.
You can rearrange the Station Table and give different programme
numbers to the stations listed according to your own preferences.
Australia Model
Enter
Also, you can change the DVD-VCR output channel to adjust the
frequency in which information is displayed on the screen.
Return
DVD Setup
DVD
1
2
Press the SETUP button on the remote control.
VCR Setup
Language
Parental
Clock Set
INSTALLATION
Installation
1
2
Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
Tape Select
Repeat play
OSD
E180
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH38
Press the corresponding
option.
",
❷
buttons to select the VCR Setup
OFF
Option
ON
Program
Press the corresponding
option.
",
❷
buttons to select the VCR Setup
3
4
Press the ENTER button to select this option.
Press the corresponding
",
❷
buttons to select the
3
4
Press the ENTER button to select this option.
"❷ꢀꢀꢀꢀ
RETURN
ENTER
Installationmenu.
Australia Model
Press the corresponding
",
❷
buttons to select the
5
6
7
8
Press the ENTER button to select this menu.
Result: The INSTALLATION menu is displayed.
Installationmenu.
Newzealand Model
5
Press the ENTER button to select this menu.
INSTALLATION
Result:
The INSTALLATION menu is displayed.
Press the corresponding
UPoption is selected.
"
or
❷
buttons, until the MANUAL SET
AUTO SET UP
MANUAL SET UP
INSTALLATION
6
7
8
Press the
selected.
"
or ❷ buttons, until the VCR OUTPUT CHoption is
VCR OUTPUT CH :CH38
AUTO SET UP
MANUAL SET UP
TV SYSTEM
Press the ENTER button to select this option.
Result: The TV STATION TABLEmenu is displayed.
Select the required output channel (CH21~CH69) by pressing the
or buttons (Australia:CH28 ~ CH69).
:G
➛
❿
VCR OUTPUT CH :CH36
"❷ꢀꢀꢀꢀ
RETURN
ENTER
Press the corresponding
"
or
❷
buttons, until the required preset
On completion, press RETURN twice to exit the menu.
Then tune your television again (see page 14).
TV programme is selected.
"❷ꢀꢀꢀꢀ
RETURN
ENTER
Result:
The selected station is displayed at the same time on
the television screen.
Newzealand Model
9
To change the programme number assigned to a station press the
ENTER button on the remote control (For example; To move a TV
station in programme 1 to programme 3).
INSTALLATION
Selecting the RF OUT Sound Mode (B/G-D/K)
(Newzealand Model only)
AUTO SET UP
MANUAL SET UP
TV SYSTEM
VCR
:G
10 Press the
"
or
❷
buttons to select required position and the press
VCR OUTPUT CH :CH36
ENTER again to swap the position.
11 On completion, press the RETURN button to exit the menu.
"❷ꢀꢀꢀꢀ
RETURN
ENTER
You can choose the sound mode (B/G or D/K) according to the TV
set connected to your VCR.
Enter
Return
DVD Setup
DVD
1
2
Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
VCR Setup
Language
Parental
Clock Set
Installation
TV STATION TABLE
Tape Select
Repeat play
OSD
E180
PR
CH
NAME
OFF
Press the corresponding
option.
",
❷
buttons to select the VCR Setup
Option
1
2
3
4
5
003
ON
Program
3
4
Press the ENTER button to select this option.
"❷
❿ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
SWAPPING:ENTER
DELETE:CLEAR
Press the corresponding
",
❷
buttons to select the
RETURN
Installationmenu.
5
6
Press the ENTER button to select this menu.
INSTALLATION
Result:
The INSTALLATION menu is displayed.
AUTO SET UP
MANUAL SET UP
TV SYSTEM
TV STATION TABLE
Press the
selected.
"
or ❷ buttons, until the TV SYSTEMoption is
:G
PR
1
CH
NAME
VCR OUTPUT CH :CH36
2
3
4
5
"❷
003
7
8
Press the
➛
or
❿
button to select G or K.
"❷ꢀꢀꢀꢀ
RETURN
ENTER
On completion, press RETURN to exit the menu.
❿ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
SWAPPING:ENTER
DELETE:CLEAR
RETURN
22
23
Download from Www.Somanuals.com. All Manuals Search And Download.
00115A DVD-V77MS-GB2 10/25/02 10:46 AM Page 24
VCR
VCR
Selecting the Colour Mode
Intelligent Picture Control
GB
GB
Before recording or playing back a cassette, you can select the
required system standard.
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
Australia Model
Otherwise, the system automatically selects the reception standard
when you select AUTO.
Enter
USER SET
☛
☛
When playing back a cassette, the standard is
automatically selected by the DVD-VCR.
Return
1
During playback, press the SETUP button on the remote control.
Result: The MAIN MENU is displayed.
DVD Setup
DVD
COLOUR SYSTEM
:AUTO
:ON
:OFF
:OFF
IPC
VCR Setup
Language
Parental
☛
When you playback an NTSC-recorded tape on this DVD-
VCR make a setting on the colour system according to your
TV. If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
AUTO POWER OFF
G-CODE EXTEND
2
3
Press the corresponding ❷ꢀbuttons to select the Option
Press the ENTER button to select this option.
Result: The USER SETmenu is displayed.
"
,
.
Option
Program
"❷ꢀꢀ➛ꢀ❿
RETURN
4
5
Press the corresponding
selected.
"
or
❷
buttons, until the IPCoption is
1
Press SETUP on the remote control.
Press the ❿ꢀbutton to select the IPC (intelligent picture control)
option.
Result:
Press the corresponding
Press the ENTER button to select this option.
Result: The USER SETmenu is displayed.
Press the corresponding or buttons, until the COLOUR
SYSTEMoption is selected.
Press the button to select AUTO☛☛PAL☛☛ MESECAM
The MAIN MENU is displayed.
Newzealand Model
Australia Model
2
3
",
❷
buttons to select the Option
.
☛
When intelligent picture control mode is ON, the sharpness
of the image is adjusted automatically.
USER SET
USER SET
6
7
To adjust the sharpness manually, press the
❷
button to turn the
COLOUR SYSTEM
NICAM
IPC
AUTO POWER OFF
G-CODE EXTEND
:AUTO
:ON
:ON
:OFF
:OFF
COLOUR SYSTEM
IPC
AUTO POWER OFF
G-CODE EXTEND
:AUTO
:ON
:OFF
:OFF
OFF
IPC mode
.
4
5
"
❷
Press the
➛
or
❿
buttons until the picture is displayed according to
your preferences.
❿
☛
B/W.
☛
If you do not press a button within ten seconds, the
PICTURE menu disappears automatically.
"❷ꢀꢀ➛ꢀ❿
AUTO When playing back a cassette, the system standard is
RETURN
"❷ꢀꢀ➛ꢀ❿
RETURN
automatically selected by the DVD-VCR.
8
On completion, press the RETURN button again.
B/W
Black and White
Newzealand Model
6
On completion, press RETURN to exit the menu.
USER SET
COLOUR SYSTEM
NICAM
IPC
:AUTO
:ON
:ON
VCR
NICAM (Newzealand Model only)
AUTO POWER OFF
G-CODE EXTEND
:OFF
:OFF
NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
Enter
NICAM programmes are always accompanied by a standard mono
sound broadcast and you can select the desired sound.
Please refer to page 36.
"❷ꢀꢀ➛ꢀ❿
RETURN
Return
DVD Setup
DVD
VCR Setup
Language
Parental
1
Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
Option
Program
2
3
Press the corresponding buttons to select the Option
"
,
❷
.
Press the ENTER button to select this option.
Result: The USER SETmenu is displayed.
4
5
Press the corresponding
is selected.
"
or
❷
buttons, until the NICAMoption
USER SET
To...
Press
➛
or , until...
❿
COLOUR SYSTEM
NICAM
:AUTO
:ON
:ON
:OFF
:OFF
Mono mode
OFFis displayed.
IPC
OFF: Only set at this position to record the
standard mono sound during a
NICAM broadcast if the stereo sound
is distorted due to inferior reception
conditions.
AUTO POWER OFF
G-CODE EXTEND
"❷ꢀꢀ➛ꢀ❿
RETURN
NICAM mode
ONis displayed.
ON: Normally set at this position.
6
On completion, press RETURN to exit the menu.
24
25
Download from Www.Somanuals.com. All Manuals Search And Download.
00115A DVD-V77MS-GB2 10/25/02 10:46 AM Page 26
VCR
VCR
Auto Power Off
Selecting the Cassette Type
GB
GB
The Auto Power Off feature automatically turns off your DVD-VCR
if no signal is received and you do not press any button for the
selected time.
If you wish to use the tape counter to display the time remaining on
a cassette, you must indicate the type of cassette inserted.
Australia Model
Enter
1
2
Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
USER SET
Return
1
Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
DVD Setup
VCR Setup
Language
Parental
DVD
COLOUR SYSTEM
:AUTO
:ON
:OFF
:OFF
Clock Set
IPC
Press the corresponding
option.
",
❷
buttons to select the VCR Setup
Installation
AUTO POWER OFF
G-CODE EXTEND
Tape Select
Repeat play
OSD
E180
2
3
Press the corresponding
",
❷
buttons to select the Option.
OFF
Option
ON
3
4
Press the ENTER button to select this option.
Program
Press the ENTER button to select this option.
Result: The USER SETmenu is displayed.
"❷ꢀꢀ➛ꢀ❿
RETURN
Press the corresponding
",
❷
buttons to select the
Tape Selectmenu.
4
5
Press the corresponding
OFFoption is selected.
"
or
❷
buttons, until the AUTO POWER
Newzealand Model
5
Press the
➛
or
❿
buttons as many times as required, until the
correct cassette length is displayed.
Press the
interval.
❿
button, until you select the time of Auto Power off
E180
E300
E240
E260
USER SET
COLOUR SYSTEM
NICAM
IPC
AUTO POWER OFF
G-CODE EXTEND
:AUTO
:ON
:ON
:OFF
:OFF
OFF 2HOUR 3HOUR
6
Press RETURN to exit the menu.
6
On completion, press RETURN to exit the menu.
"❷ꢀꢀ➛ꢀ❿
RETURN
VCR
VCR
Auto Repeat Play
G-CODE EXTEND
Australia Model
You can set repeat play to repeat the tape continuously from
beginning to end.
To prevent delays or over-runs the DVD-VCR has a function called
G-CODE EXTEND allowing you to extend the recording time by up
to 60 minutes.
Enter
Return
DVD Setup
VCR Setup
Language
Parental
DVD
USER SET
1
2
Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
Clock Set
Installation
COLOUR SYSTEM
IPC
AUTO POWER OFF
G-CODE EXTEND
:AUTO
:ON
:OFF
:OFF
1
2
3
Press the SETUP button on the remote control.
Press the corresponding buttons to select the Option
Press the ENTER button to select this option.
Tape Select
Repeat play
OSD
E180
OFF
OFF
10
Option
ON
",
❷
.
Press the corresponding
option.
",
❷
buttons to select the VCR Setup
Program
60
➛ꢀ❿ꢀꢀꢀ"❷
Result: The USER SETmenu is displayed.
RETURN
3
4
Press the ENTER button to select this option.
4
5
6
Press the corresponding or buttons, until the
G-CODE EXTENDoption is selected.
Press or buttons to set the G-CODE EXTEND time by
"
❷
Press the corresponding
",
❷
buttons to select the
Repeat Playmenu.
Newzealand Model
➛
❿
5
To...
Repeat play
Do not wish to repeat play
Press
➛
or ❿, until...
increments of 10 minutes.
ONis displayed.
USER SET
To turn off, press or buttons repeatedly until OFFshows.
➛
❿
COLOUR SYSTEM
NICAM
IPC
:AUTO
:ON
OFFis displayed.
:ON
:OFF
:OFF
OFF
10
AUTO POWER OFF
G-CODE EXTEND
6
On completion, press RETURN to exit the menu.
60
➛ꢀ❿ꢀꢀꢀ"❷
RETURN
26
27
Download from Www.Somanuals.com. All Manuals Search And Download.
00115A DVD-V77MS-GB2 10/25/02 10:46 AM Page 28
VCR
VCR
Displaying/Hiding On-Screen Information
Protecting a Recorded Cassette
GB
GB
Your DVD-VCR displays most information both on the DVD-VCR
and the television.
Video cassettes have a safety tab to prevent accidental erasure.
When this tab has been removed, you cannot record on the tape.
Enter
You can choose to display or hide this information on the television
screen (except for the Index, MAIN MENU and Timer functions,
which cannot be hidden).
Return
DVD Setup
VCR Setup
Language
Parental
DVD
1
2
If you wish to protect a cassette, break off the tab using a small
screwdriver.
Clock Set
Installation
Tape Select
Repeat play
OSD
E180
1
2
Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
OFF
1
Option
To re-record over a protected cassette (safety tab broken), cover
the hole with adhesive tape.
ON
Program
Press the corresponding
option.
",
❷
buttons to select the VCR Setup
3
4
5
Press the ENTER button to select this option.
Press the corresponding buttons to select the OSDmenu.
To... Press or , until...
"
,❷
VCR
Recording a Programme Immediately
➛
❿
Display on-screen information
Hide on-screen information
ONis displayed.
Before recording a programme, you must have preset the corres-
ponding station (unless you are recording via an external video
source). If you have not done so, refer to pages 19 and 20.
OFFis displayed.
ANGLE
AUDIO
0
4
6
On completion, press RETURN to exit the menu.
1
2
Switch on the television.
To monitor the programme being recorded, select the television
channel reserved for use with your DVD-VCR (or the AV input if
used).
4
3
4
Insert the cassette on which the programme is to be recorded, with
the window visible and the safety tab intact or the opening covered
with adhesive tape.
VCR
Selecting the Recording Speed
Result:
The DVD-VCR is switched on automatically.
6
Select:
☛
☛
The station to be recorded using the PROG/TRK (
buttons
or
"
or
❷)
You can record a cassette at two different speeds:
Type
Recording Time (in SP)
180 mins. or 3 hours
240 mins. or 4 hours
5
☛
SP (Standard Play)
LP (Long Play)
E-180
E-240
E-260
The LINE source using the INPUT SEL. button for a satellite
tuner or external video source
☛
260 mins. or
4 hours and 20 mins.
In Long Play modes:
Result:
The station number is displayed and the programme
can be seen on the television.
☛
☛
Each cassette lasts twice as long
The recording is of a slightly lower quality
E-300
300 mins. or 5 hours
5
6
Select the recording speed by pressing the SPEED button as
many times as required (see page 28).
To record a cassette...
Press the SPEED button on the
remote control, until...
7
Hold REC ( ) down for a while to start recording.
☛
In standard play mode
In long play mode
SPis displayed.
LPis displayed.
Result:
The record indicator appears on the television and DVD-
VCR display. An index is recorded on the tape (see page
38).
7
To stop recording, press once.
☛
☛
☛
☛
If your DVD-VCR ejects the cassette when you start
recording, check to make sure that the cassette’s
safety tab is intact or that the opening (created by a
broken safety tab) is covered with adhesive tape.
If you reach the end of the tape while recording, the
cassette rewinds automatically.
28
29
Download from Www.Somanuals.com. All Manuals Search And Download.
00115A DVD-V77MS-GB2 10/25/02 10:46 AM Page 30
VCR
VCR
Recording a Programme with Automatic Stop
Using the G-CODE Feature
GB
GB
Before presetting your DVD-VCR:
This function enables you to record up to nine hours (LP) of
programmes.
☛
☛
☛
Switch on both the television and your DVD-VCR
Your DVD-VCR stops automatically after the requested length of
time.
Check that the date and time are correct
Insert the cassette on which the programme is to be
recorded (safety tab intact)
OPEN/CLOSE
EJE
SELECT
VIDEO
COPY
Up to six programmes can be preset.
PRPG
REC
L
AUDIO
2
1
2
Switch on the television.
1
LINE IN
1
Press the TIMER button.
3
To monitor the programme being recorded, select the television
channel reserved for use with your DVD-VCR (or the AV input if
used).
Result:
The TIMER METHODis displayed.
2
3
Press the corresponding
is selected.
"
or
❷
buttons, until the G-CODEoption
3
4
Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
ANGLE
AUDIO 4
0
Press the ENTER button to select G-CODE
.
TIMER METHOD
STANDARD
G-CODE
Result:
A message is displayed to allow you to enter the
G-CODE code.
Result:
The DVD-VCR is switched on automatically.
☛
If all six programmes have been set, the message TIMER
IS FULL is displayed. Refer to page 34 if you wish to
cancel a preset recording.
Select:
☛
☛
The station to be recorded using the PROG/TRK (
buttons
or
"
or
❷)
4
RETURN
"❷
ENTER
4
5
Press the numeric buttons to enter the code opposite the pro
gramme that you wish to record in your television magazine.
The LINE source using the INPUT SEL. button for a satellite
tuner or external video source
☛
If you wish to correct the G-CODE code that you are
entering:
Result:
The channel number is displayed and the programme
can be seen on the television.
G-CODE
☛
Press the
cleared
➛
button until the digit to be corrected is
6
CODE ---------
☛
Enter the correct digit
5
6
Select the recording speed by pressing the SPEED button as
many times as required (see page 28).
Press the ENTER button.
Result: The information concerning the programme is displayed.
5
CODE:0-9
RETURN
CORRECT:➛
Hold the REC button ( ) down for a while to start recording.
☛
ENTER
☛
When using the G-CODE function for the first time with
stored stations, the programme number flashes. This one
time, you must enter the station number manually by
Result:
The record indicator appears on the television screen
and DVD-VCR display. An index is recorded on the
tape (see page 38).
pressing the
"
or
❷
buttons. Refer to the following page if:
7
8
Press the REC button ( ) several times to increase the recording
time in:
☛
☛
☛
The programme number or times flash
You wish to modify the programme
1/JAN TUE 12:09
PR DAY START
→
STOP
-- ------:--→→--:----
☛
30-minute intervals up to four hours
1-hour intervals up to nine hours (LP)
LENGTH 2:30
-- ------:-- --:----
☛
6
7
8
If the programme and times are correct, press the RETURN button.
Press the STANDBY/ON button to activate the timer.
Refer to page 34 if you wish to:
-- ------:--→→--:----
-- ------:--→--:----
-- ------:--→--:----
-- ------:-- --:----
SET LENGTH :
Result:
The length is displayed on the television displays. The
selected programme is recorded for the length of time
requested. At the end of that time, the DVD-VCR stops
recording automatically.
PRESS REC
☛
"❷
SET:❿
DELETE:CLEAR
RETURN
☛
☛
Check that your VCR has been programmed correctly
Cancel a preset recording
If you wish to cancel the recording before the end, press
STANDBY/ON.
☛
The numbers next to each TV programme listing are
G-CODE code numbers, which allow you to programme
your videorecorder instantly with the remote control. Tap
in the G-CODE code for the programme you wish to
record.
☛
If the end of the tape is reached while recording:
The recording stops and power off
☛
7
1
4
2
3
6
5
™ G-CODE is a trademark of Gemstar Development Corporation. The G-CODE system is
manufactured under licence from Gemstar Development Corporation.
30
31
Download from Www.Somanuals.com. All Manuals Search And Download.
00115A DVD-V77MS-GB2 10/25/02 10:46 AM Page 32
VCR
VCR
Using the Timer Programming Feature
Modifying G-CODE Programming
GB
GB
The Timer Programming feature allows you to preset the DVD-VCR
to record a programme up to one month before that programme is
to be broadcast. Up to six programmes can be preset.
If you wish to correct the programme displayed or modify certain elements, such as the recording
speed, you can do so before you press SETUP a second time to confirm.
TIMER METHOD
☛
Before presetting a recording, check that the date and
time are correct.
If you wish to...
Then...
STANDARD
G-CODE
Select an input source other
☛ Press the
➛
or
❿
buttons, until the PRselection flashes.
1
2
Insert the cassette and press TIMER on the remote control.
Result: The timer method is displayed.
than the tuner (LINE IN 1 or LINE IN 2)
☛ Press the INPUT SEL. button one or more times to change the
input source selection.
RETURN
"❷
ENTER
Result:
The programme number is replaced by:
Press the ENTER button to select STANDARD option.
Result: The TIMER PROGRAMMING menu is displayed.
•
The LINE IN 1 or LINE IN 2 source using the
INPUT SEL. button for a satellite tuner or
external video source
3
4
5
Press ❿ꢀto select the input source.
Select the required station by pressing the
",
❷
buttons.
☛
The input source must be selected before changing any
other value.
1/JAN TUE 12:09
PR DAY START
→
STOP
Press
Select the required day by pressing the
Press to select the recording start time.
Select the required hour value by pressing the
Press to select the minutes.
❿
to select the recording day.
1 SA 912:00→→12:50SP
-- ------:-- --:----
Record a programme every day
☛ Press the
☛ Press the
displayed.
➛
or
or
❿
buttons, until the DAYselection flashes.
buttons, until the DLY(Daily) value is
-- ------:--→--:----
-- ------:--→→--:----
-- ------:--→--:----
-- ------:-- --:----
6
7
8
9
"
or
❷
buttons.
(Monday to Sunday) at the same time
"
❷
❿
"❷ ➛❿
RETURN
SET:❿
DELETE:CLEAR
"
or
❷
buttons.
Record a programme every week
☛ Press the
➛
or
or
❿
buttons, until the DAYselection flashes.
buttons, until the W-(Week) value is
❿
on the same day and at the same time
☛ Press the
"
❷
displayed, followed by the required day.
10 Select the required minute value by pressing the
11 Press to select the recording stop time.
12 Select the required recording stop time by pressing the
"
or
❷
buttons.
Example: W-SA(Weekly Saturday)
❿
Extend the recording time
Select the recording speed
☛ Press the
☛ Press the
time.
➛
or
or
❿
buttons, until the STOPselection flashes.
buttons to increase or decrease the stop
"
or
❷
"
❷
buttons, following the same procedure as when selecting the
recording start time.
16
13 Press
❿
to select the recording speed.
☛ Press the
➛
or
or
❿
buttons, until the recording speed selection
buttons until the correct indication is
1
2
3
flashes.
☛ Press the
displayed:
• AUTO(Auto Tape Speed Select) : see page 33
• SP(Standard Play)
14 Press the
"
or ❷ buttons to select the SP (Standard Play), LP
(Long Play), AUTO(Auto Tape Speed Select) recording speeds.
"
❷
15 When you have finished, press the RETURN button.
16 Press the STANDBY/ON button to activate the timer.
Result:
Before starting recording, the DVD-VCR compares the
timer duration with the remaining time on the cassette.
• LP(Long Play)
☛
Auto Tape Speed Select. The DVD-VCR’s “Auto Tape
Speed Select” function compares the duration of the timer
recording to the actual recording time remaining on the
tape loaded. If there is insufficient tape to complete a
timer recording in AUTO mode, the DVD-VCR
automatically switches to LP mode to record the whole
programme.
32
33
Download from Www.Somanuals.com. All Manuals Search And Download.
00115A DVD-V77MS-GB2 10/25/02 10:46 AM Page 34
VCR
VCR
Checking a Preset Recording
Playing a Cassette
GB
GB
This function allows you to play back any pre-recorded cassette.
You can check your preset recordings:
☛
☛
When you have finished presetting the DVD-VCR
1
2
Switch on both the television and your DVD-VCR.
2
3
If you have forgotten which programmes will be
recorded
Insert the video cassette to be played. If the safety tab on the
cassette is intact, press ❿ll
.
1/JAN TUE 12:09
Otherwise, the cassette is played automatically.
PR DAY START
→
STOP
1 SA 912:00→→12:50SP
1
2
Press TIMER on the remote control.
Result: The timer method is displayed.
☛
When a cassette is loaded, the tape position is optimized
automatically to reduce disturbance (Digital Auto Tracking).
-- ------:-- --:----
-- ------:--→--:----
-- ------:--→→--:----
-- ------:--→--:----
-- ------:-- --:----
When playing a cassette, if the end of the tape is reached,
the cassette is rewound automatically.
NTSC tapes can be played back but cannot be recorded
with this DVD-VCR.
Press the ENTER button to select STANDARD option.
Result:
The TIMER PROGRAMMING menu is displayed.
"❷ ➛❿
RETURN
DELETE:CLEAR
3
4
Press the
"
or
❷
buttons to select the required programme.
EJECT
3
To...
Then press...
Press the
➛
or
❿
buttons to select and change any values as
3
required. For more details, refer to the previous page.
SELECT
VIDEO
COPY
Stop the playback
Eject the cassette
(STOP).
☛
5
On completion, press RETURN.
(EJECT).
L
AUDIO
R
PG
REC
VCR
Adjusting Picture Alignment Automatically
The Picture Alignment feature enables you to optimize the tape
position automatically to obtain the best possible picture.
ANGLE
AUDIO
0
VCR
Cancelling a Preset Programme
When noise bars or streaks appear during playback, adjust picture
alignment by pressing the A.TRK button.
You can cancel any programmes that are:
Incorrect
No longer required
Result:
☛ The tracking bar appears.
☛ The picture is automatically adjusted.
☛ The tracking bar disappears when digital auto tracking has
been completed.
☛
☛
1/JAN TUE 12:09
PR DAY START
→
STOP
1 SA 912:00→→12:50SP
1
2
Press TIMER on the remote control.
Result: The timer method is displayed.
-- ------:-- --:----
-- ------:--→→--:----
-- ------:--→--:----
-- ------:--→--:----
-- ------:-- --:----
Press the ENTER button to select STANDARD option.
Result: The TIMER PROGRAMMING menu is displayed.
VCR
Adjusting Picture Alignment Manually
"❷ ➛❿
RETURN
DELETE:CLEAR
3
4
Select the programme to be cancelled by pressing the
buttons.
"
or❷ꢀ
The Picture Adjustment feature allows you to adjust the alignment
manually to obtain the best possible picture.
Press the CLEAR button to cancel the selected programme.
Result:
All the recording information is deleted and the broad-
cast will not be recorded.
ANGLE
AUDIO
0
When noise bars or streaks appear during playback, adjust alignment
manually by pressing the PROG/TRK (
"
or
❷) buttons until the picture is
5
On completion, press RETURN.
clear and stable.
4
Result:
☛ The tracking bar appears.
☛ The image is adjusted.
☛ The tracking bar disappears when you release the button.
34
35
Download from Www.Somanuals.com. All Manuals Search And Download.
00115A DVD-V77MS-GB2 10/25/02 10:46 AM Page 36
VCR
VCR
Selecting the Audio Output Mode
Playing a Sequence Frame by Frame
GB
GB
You can:
You can select the mode in which the sound is reproduced on the
loudspeakers and AV outputs. The following options are available.
☛
☛
Stop the cassette at a given frame (image)
Advance one frame at a time
7
8
0
9
☛
No sound is heard when playing back frame by frame.
ANGLE
AUDIO
Option
Description
L
Used to listen to the sound on the left Hi-Fi channel.
Used to listen to the sound on the right Hi-Fi channel.
1
2
Press:
☛
☛
☛
❿ll to start playing the cassette
❿ll to still the tape at a given frame
Turn the to advance frame by frame
R
1
MIX
Used to listen to the mixed sound of the Hi-Fi and normal
channels.
JOG Dial
To return to normal playback, press ❿ll
.
MONO
L R
Used to listen to the sound on the normal mono channel.
☛
☛
When you have been using the Frame-by-Frame function
for more than about five minutes, the DVD-VCR will
automatically play to protect the cassette and video
heads.
Used to listen to Hi-Fi stereo sound on the left and right
channels.
L
R
MIX
MONO
☛
When playing back tapes recorded in Hi-Fi, the
sound switches to Hi-Fi after five seconds of Mono.
L R
Vertical stability: When playing back frame by frame,
interference may be seen on the screen. Press the
PROG/TRK buttons to minimize this effect.
To select the sound mode, simply press the AUDIO button on the remote
control until the required option is displayed.
VCR
Playing a Cassette in Slow Motion
VCR
Playing a Sequence at Variable Speeds
You can play a cassette in slow motion.
You can vary the playback speed using the Shuttle function (up to
nine times the normal speed).
☛
No sound is heard when playing back a cassette in slow
motion.
Example:
You wish to analyze a sportsperson’s technique,
movement by movement.
1
1
1
2
Press:
The Shuttle function is available on the Remote control
☛
❿ll to start playing the cassette
❿ll button one more time to make STILL mode.
❿❿ to start SLOW mode.
☛
☛
☛
☛
No sound is heard when playing a sequence at variable
speeds.
1
1
❿❿
➛➛ button as many times as required to decrease or
or
increase the speed respectively
o return to the normal speed, press the ❿ll
1
Press:
☛
T
button twice.
☛
☛
☛
❿ll during playback
Turn the SHUTTLE dial to left to play the cassette backwards.
Turn the SHUTTLE dial to right to play the cassette forwards.
ANGLE
AUDIO
0
2
2
When playing back in slow motion, picture interference may occur.
Press the PROG/TRK ( or ) buttons to minimize this effect.
"
❷
☛
When you have been using the Slow Motion function for
more than about five minutes, the DVD-VCR will
automatically play to protect the:
☛ Cassette
☛ Video heads
36
37
Download from Www.Somanuals.com. All Manuals Search And Download.
00115A DVD-V77MS-GB3 10/25/02 10:48 AM Page 38
VCR
VCR
Picture Search, Fast Forward/Rewind
Using the Tape Counter
Picture Search enables you to Fast Forward or Rewind and look for
a particular part of a tape.
GB
GB
The tape counter:
1
Press PLAY, the VCR will enter normal play mode. While in play,
press and release the ❿❿ (or ➛➛) button. The VCR will search at 5
◆
Indicates the elapsed time in the play and record modes
times the normal playback speed.
(hours, minutes and seconds)
◆
◆
Is reset when a cassette is inserted in the DVD-VCR
2
3
To return to normal playback mode, press the
❿
button.
II
Allows you to find the beginning of a sequence easily
If you press and HOLD down the ❿❿ (or ➛➛) button the VCR will
search at 9 times the normal speed. Releasing the ❿❿ button will
return the VCR to search at 5 times the normal speed. To return to
◆
If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.
normal playback mode, press the
❿
II
button.
0:00:00
4
5
6
Whilst in Picture Search mode, if you press the ❿❿ button again,
the VCR will enter normal Fast Forward mode.
1
2
Insert a cassette in your DVD-VCR.
Likewise, whilst in Picture Search ➛➛ mode, if you press the ➛➛
button again, the VCR will enter normal Rewind mode.
To set the tape counter to zero at the beginning of a sequence:
If, when Rewinding (➛➛) or Fast Forwarding (❿❿), you press the ➛➛
(or ❿❿) button, the VCR will enter the Picture Search mode.
◆
Press DISPLAY twice to display the counter
◆
Press CLEAR when you want to set the tape counter to zero
2
2
3
When you are ready,
◆
◆
◆
Start playback or Recording.
Press the button.
To fast-forward or rewind to the sequence at which the
counter was set to zero, press ➛➛ or ❿❿
VCR
Searching for a Specific Sequence
◆
.
Each time you record a cassette on this VCR, an “index” is
automatically marked on the tape when recording starts.
The Search function allows you to fast-forward or rewind to a
specific index and start playback from that point. Depending on the
direction selected, the indexes are numbered as follows:
◆
Some DVD-VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the OSD mode; refer to page 28).
Press DISPLAY:
◆
Once to display the current function, programme
number, recording speed, date, time and counter
Seq. being Next
played Seq.
Prev
Seq.
etc.
etc.
◆
◆
Twice to display the counter only
2
1
1
2
Three times to display the time remaining on the
cassette
◆
This VCR uses a standard indexing system (VISS). As a
result, it will recognize any indexes marked by other
VCRs using the same system and vice versa.
◆
Four times to clear the display
INTRO SCAN
1
2
To search for a specific index, press INDEX.
Press the ➛➛
where your desired programme is located.
❿❿
or
buttons depending on the direction
3
4
When an Index mark is found the VCR will playback the tape for 5
seconds, after which it will continue searching for the next Index mark.
If you want to watch the tape from a particular Index, simply press
❿
II
.
Index Skip Search:
This feature will enable you to fast forward/rewind to a specific
point on a tape: E.g. if you have recorded 3 different programmes
on a tape and you have rewound the tape to the beginning, by
using this feature you can go directly to the start of programme 2
simply by pressing the INDEX button.
1
2
Press the INDEX to start the Index search.
Press the ➛➛
❿❿
buttons twice more. This will take
or
you directly to the start of the desired programme is located.
3
4
These Index searches can be made forwards: (press ❿❿) or
backwards: (press ➛➛).
To cancel an Index search simply press the
❿
II
or
button.
◆
38
39
Download from Www.Somanuals.com. All Manuals Search And Download.
00115A DVD-V77MS-GB3 10/25/02 10:48 AM Page 40
VCR
VCR
Connecting an RCA Audio/Video Input Cable
Using the Assemble Edit Function
GB
GB
This function allows you to start a new recording at a specific
position on the cassette while maintaining a very smooth scene
change.
You can connect other audio/video equipment to your DVD-VCR
using audio/video cables if the appropriate outputs are available on
the equipment chosen.
SELECT
1
2
3
Insert the cassette to be edited in your DVD-VCR.
L
AUDIO R
REC
VIDEO
2
Examples: ◆ You wish to copy a video cassette with the help of a
Press the ❿ll button to start playback.
second VCR (see page 41).
When you reach the position from which you wish to start the new
recording, press the ❿ll button.
N 2
1
◆
◆
You wish to play back and/or copy pictures taken
with a camcorder (see page 41).
5
4
5
Turn the
again as often as necessary to advance frame
JOG Dial
◆
Make sure that both the television and the DVD-VCR
are switched off before connecting the cables.
by frame, until the exact recording position is located.
While the DVD-VCR is in still mode, hold the REC button (
down for a while to activate the Assemble Edit function.
)
◆
1
2
3
Connect one end of the RCA audio/video cable into the VIDEO
socket on the Front of the DVD-VCR.
Result:
Record symbol flashes in the display.
L
AUDIO R
REC
VIDEO
6
Select the source from which you wish to record by pressing:
◆
◆
The PROG/TRK (
$
or
❷) buttons for television channels
Plug the other end of the audio/video cable into the appropriate
output connector on the other system (VCR or camcorder).
3
LINE IN 2
3
The INPUT SEL. button for the LINE input sources
4
7
8
Press the ❿ll button to start recording.
Connect one end of the RCA audio cable into the AUDIO sockets
on the Front of the DVD-VCR.
When you have finished recording, press
.
◆
◆
Take care to respect the colour coding of the left and right
channels.
4
Plug the other end of the audio cable into the appropriate output
connectors on the other system (VCR, camcorder or Hi-Fi sound
system).
VCR
Recording from Another VCR or Camcorder
You can copy a cassette to your DVD-VCR from another video
source, such as another VCR or a camcorder.
◆
It is an infringement of copyright laws to copy prerecorded
cassettes or to re-record them in any form without the
permission of the owners of the corresponding copyright.
OPEN/CLOSE
JECT
ON
CT
VDEO
COPY
K
PRPG
REC
L
AUDIO
2
R
1
Connect the DVD-VCR, from which the cassette is to be copied, to
the appropriate RCA audio and video input connectors on the rear
of your DVD-VCR, as indicated on page 11.
LINE IN
2
2
3
Insert a blank cassette in your DVD-VCR.
Insert the pre-recorded cassette in the other video source (VCR or
camcorder).
4
Press the INPUT SEL. button to select the appropriate input on
your DVD-VCR: LINE IN for the RCA input
7
5
6
Start playing back the cassette to be copied.
Hold REC ( ) down for a while to start recording on your
◆
DVD-VCR.
7
When you have finished recording, press
DVD-VCR.
on both VCR and
◆
6
◆
If you wish to view the cassette being copied:
◆
Your DVD-VCR must be connected as usual to the
television (see page 11 for further details)
40
41
Download from Www.Somanuals.com. All Manuals Search And Download.
00115A DVD-V77MS-GB3 10/25/02 10:48 AM Page 42
VCR
VCR
Audio Dubbing a Pre-recorded Cassette
Using the TV Buttons on the Remote Control
GB
GB
Your DVD-VCR remote control will work with Samsung televisions
and compatible brands.
With the Audio Dubbing function, you erase the previously
recorded sound and replace it with a new soundtrack from:
To determine whether your television is compatible, follow the instructions
below.
4
5
VIDEO EDIT
◆
◆
◆
A CD, DVD
1
4
3
6
A microphone connected to a sound system
A cassette player
1
5
8
0
1
2
3
Switch your television on.
7
9
ANGLE
AUDIO
A.DUB
A.DUB
6
10
Point the remote control towards the television.
Restriction:
2
2
Audio dubbing is applicable only to the longitudinal audio track
(normal audio).
Hold down the TV button and enter the two-figure code
corresponding to the brand of your television, by pressing the
appropriate numeric buttons.
Brand
Codes
Brand
Codes
1
2
3
4
Connect an RCA audio cable to the appropriate output on your
sound system (cassette player for example).
ANGLE
AUDIO
0
SAMSUNG
AKAI
GRUNDIG
LOEWE
01 to 06
09, 23
09, 17, 21
02
PHILIPS
SABA
SONY
THOMSON
TOSHIBA
02, 20, 22
13, 14, 22 to 24
15, 16
13, 14, 24
07, 16 to 19, 21
4
L
AUDIO
R
EC
VIDEO
2
Connect the other end of the RCA audio cable to the audio input
connectors (L, R) on the Front of your DVD-VCR.
3
2
4
LINE IN 2
Insert the pre-recorded cassette on which the audio track is to be
replaced, and press the ❿ll to start playback.
PANASONIC
08, 23 to 27
Result: If your television is compatible with the remote control, it
will switch off. It is now programmed to operate with the
remote control.
Search for the Audio Dubbing (ending) point using the ❿❿, and set
the counter to 0:00:00 by pressing CLOCK/COUNTER and
CLEAR.
ANGLE
AUDIO
0
◆
If several codes are indicated for your television brand, try
each one in turn until you find one that works.
5
5
6
7
Search back slightly beyond the Audio Dub start point using the ➛➛
button.
◆
When you change the batteries in the remote control, you
must reprogramme the code, following the same procedure.
Press the ❿ll button.
Press the ❿ll button one more time to make STILL mode.
7
5
You can then control the television using the following buttons.
Press A.DUB.
Result:
mode.
Your DVD-VCR is now in the Audio dubbing Still
Button
Function
STANDBY/ON
Used to switch the television and DVD-VCR on and off.
Used to switch between the TV and VCR modes.
Used to select an external source.
◆
8
9
Press the INPUT SEL. button to select Audio dubbing source.
ex) If you want to dub external cassette player, then select LINE.
TV or VCR
◆
On the sound system, locate the point on the cassette at which
you wish to start playback.
6
INPUT SEL.
◆
1
4
2
5
3
6
Example: The track that you wish to record on the cassette.
VOL + or –
PROG/TRK
Used to adjust the volume of the television.
Used to select the required programme.
◆
A.DUB
-0:05:23
10 When you are ready:
◆
◆
◆
Start playback on the sound system
Press the REC on the remote control.
The soundtrack is replaced on the pre-recorded cassette.
(
$
or
❷)
TV MUTE
◆
Used to mute the volume of the television.
Result:
11 The audio dubbing will finish when the counter reaches 0:00:00.
The various functions will not necessarily work on all
televisions. If you encounter problems, operate the
television directly.
◆
◆
The new sound will be recorded on the normal sound track
of the tape, and the original sound will remain on the Hi-Fi
sound track. To hear the new sound and original sound
mixed together, press the Audio button on the remote
control until the MIX option is displayed (see page 36).
Select LINE by pressing the INPUT SEL button until you hear
the sound you want to dub.
42
43
Download from Www.Somanuals.com. All Manuals Search And Download.
00115A DVD-V77MS-GB3 10/25/02 10:48 AM Page 44
VCR
DVD
SQPB (Super VHS Quasi Playback)
Choosing a Connection
GB
GB
This function is for playback of Super VHS format tapes only, not
for recording.
The following show examples of connections commonly used to connect the DVD player with a TV
and other components. It is only available for DVD. The VCR out can not watch by this connection.
1
2
3
Inset the SVHS format tape that you want to see.
3
Press PLAY (❿ll) to start playing the cassette.
Press SVHS button to start SQPB.
Connection to an Audio System
Connection to an Television
◆◆
If the SQPB is on during normal playback, the video
output is distorted.
Television
Dolby Digital Decoder
Digital Audio Input Jack
OPTICAL COAXIAL
or
DIGITAL AUDIO OUT
S-VIDEO OUT
OPTICAL
COAXIAL
DVD-VCR
Digital Audio out
Jack
S-Video
Jack
44
45
Download from Www.Somanuals.com. All Manuals Search And Download.
00115A DVD-V77MS-GB3 10/25/02 10:48 AM Page 46
DVD
DVD
Playing a Disc
Using the Search & Skip Functions
GB
GB
Before Playback :
During playback, you can search quickly through a chapter or track
or use the skip function to jump to the next selection.
◆
Turn on a TV and press the TV/VCR button to select
video mode.
◆
◆
Turn on your Audio System and select AUX, CD or DVD.
Refer to your AUDIO User’s Manual.
1
During playback, press the ❿❿ ➛➛ button on the remote.
or
◆
Press the ❿❿ ➛➛ button on the remote and press again to
or
search at a faster speed(2X/4X/8X/16X/32X/128X in order)
on the DVD.
1
Press the OPEN/CLOSE button.
1
1
1
2
3
Place a disc gently into the tray with the disc’s label facing up.
◆
◆
Press the ❿❿ ➛➛ button on the remote and press again to
or
search at a faster speed(2X/4X/8X in order) on VCD and CD.
To return to normal speed playback, press the ❿ll
(PLAY/STILL) button.
Press the ❿ll (PLAY/STILL) button or OPEN/CLOSE button to
close the disc tray.
1
2
3
2
During playback, press the ❿❿ (NEXT SKIP) or ➛➛ (BACK SKIP)
I
I
◆◆
RESUME function :
button.
When you stop disc play, the player remembers where you
stopped, so when you press PLAY again, it will pick up
where you left off (unless the disc is removed, the STOP
button is pressed twice or the player is unplugged.).
◆
When playing a DVD, if you press the ❿❿ (NEXT SKIP)
I
button, it moves to next chapter. If you press the ➛➛ (BACK
I
SKIP) button, it moves to the beginning of the chapter. One
more press makes it move to the beginning of the previous
chapter.
2
2
3
◆
◆
◆
◆
If the player is left for 5 minutes in still mode, it will
stop.
◆
When playing a VCD 2.0 in MENU OFF mode, a VCD 1.1 or
a CD, if you press the ❿❿ (NEXT SKIP) button, it moves to
I
This icon indicates an invalid button press.
next track. If you press the ➛➛ (BACK SKIP) button, it moves
I
Before using the DVD operation, press the DVD button
on the remote control to watch and select DVD.
to the the beginning of the track. One more press makes it
move to the beginning of the previous track.
◆
If a track exceeds 15 minutes when playing a VCD and you
press the ❿❿ (NEXT SKIP) button, it moves forward 5
I
minutes. If you press the BACK SKIP button, it moves
backward 5 minutes.
1
Stopping Playback. Press the STOP button during playback.
Removing Disc. Press the OPEN/CLOSE button.
2
3
Stilling Playback.
Press the ❿ll (PLAY/STILL) button on the remote during
playback.
◆
◆
When in search mode (8X/16X/32X/128X) on a DVD
or high-speed playback on a VCD, no sound will be
heard.
◆
Screen stops, no sound.
◆ Depending on the disc, audio may not be heard when
a disc is in 2X playback mode.
◆
To resume again, press ❿ll (PLAY/STILL) button once
3
1
again.
4
5
Step Motion Playback (Except CD)
Turn the JOG dial the remote during stilling playback.
◆
Each time the button is pressed, a new frame will appear.
◆
No sound is heard during STEP mode.
◆
Press ❿ll (PLAY/STILL) to resume normal playback.
(You can only perform step motion playback in the forward
direction.)
Slow Motion Playback (Except CD)
Press the ❿❿ button on the remote during STILL or STEP mode.
5
◆
By pressing the ❿❿ button, you can select slow motion
playback for 1/2, 1/4 or 1/8 of normal speed.
No sound is heard during slow mode.
◆
◆
◆
Press ❿ll (PLAY/STILL) to resume normal playback.
When playing, the reverse slow motion playback will not
work.
46
47
Download from Www.Somanuals.com. All Manuals Search And Download.
00115A DVD-V77MS-GB3 10/25/02 10:48 AM Page 48
DVD
DVD
Audio Language
Player Menu Language
GB
GB
Follow these steps to choose your preferred language for DVD
audio soundtracks. The DVD-VCR will automatically default to the
language you choose if it is available on a given DVD.
Follow these steps to choose preferred language for player menus.
The DVD-VCR will automatically default to the language you
choose if it is available on a given DVD.
Enter
Enter
Return
Return
DVD Setup
VCR Setup
Language
Parental
DVD
DVD Setup
VCR Setup
Language
Parental
DVD
Player Menu
Disc Menu
English
1
2
Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
English
Player Menu
English
1
2
Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
Audio
Disc Menu
English
English
Subtitle
Automatic
Audio
English
Option
Subtitle
Automatic
Option
Select “Language”
Program
Program
Select “Language”
Using the up and down buttons, move the selection cursor to
Using the up and down buttons, move the selection cursor to
“Language,” then press ENTER to select.
“Language,” then press ENTER to select.
Enter
3
4
Select “Audio”
Move the selection bar to “Audio,” then press ENTER to select.
Enter
Return
3
4
Select “Player Menu”
Move the selection bar to “Player Menu,” then press ENTER to
select.
Return
DVD Setup
VCR Setup
Language
Parental
DVD Setup
VCR Setup
*
Set “Audio Language” Preference
Move the selection bar to your preferred language for DVD audio
soundtracks, then press ENTER to select.
Language
Player Menu
Option
Parental
Option
Set “Player Menu Language” Preference
Move the Selection bar to your preferred language for
“Player menu” disc menus, then press ENTER to select.
Program
Audio
Program
◆
If the selected language is not recorded on the disc, the
original pre-recorded language is selected.
DVD
DVD
Disc Menu Language
Subtitle Language
Follow these steps to choose your preferred language for DVD disc
menus. The DVD-VCR will automatically default to the language
you choose if it is available on a given DVD.
Follow these steps to choose your preferred language for DVD
subtitles. The DVD-VCR will automatically default to the language
you choose if it is available on a given DVD.
Enter
Enter
Return
Return
DVD Setup
VCR Setup
Language
Parental
DVD
DVD Setup
DVD
Player Menu
English
English
Player Menu
Disc Menu
English
Disc Menu
VCR Setup
Language
Parental
1
2
Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
1
2
Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
English
Audio
English
Audio
Subtitle
English
Automatic
Option
Subtitle
Automatic
Option
Program
Select “Language”
Select “Language”
Program
Using the up and down buttons, move the selection cursor to
Using the up and down buttons, move the selection cursor to
“Language,” then press ENTER to select.
“Language,” then press ENTER to select.
Enter
Enter
3
4
Select “Disc Menu”
Move the selection bar to “Disc Menu,” then press ENTER to select.
3
4
Select “Subtitle”
Move the selection bar to “Subtitle,” then press ENTER to select.
Return
Return
DVD Setup
VCR Setup
DVD Setup
VCR Setup
Language
Set “Disc Menu Language” Preference
Move the selection bar to your preferred language for DVD disc
menus, then press ENTER to select.
Language
Set “Subtitle Language” Preference
Move the selection bar to your preferred language for DVD
subtitles, then press ENTER to select.
Parental
Option
Parental
Option
Disc Menu
Subtitle
Program
Program
◆
If the selected language is not recorded on the disc, the
original pre-recorded language is selected.
◆
How to make the SETUP MENU disappear or return to
menu screen during setup; press RETURN button.
48
49
Download from Www.Somanuals.com. All Manuals Search And Download.
00115A DVD-V77MS-GB3 10/25/02 10:48 AM Page 50
DVD
DVD
Setting Up the Parental Control
Setting Up the DVD Setup Menu
GB
GB
Rating Control is a password protected system that allows you to
block playback of DVDs based on their content. The system uses an
eight level rating system.
1
With the unit in Stop mode, press the SETUP button on the remote.
Result: The MAIN MENU is displayed.
Enter
Return
DVD Setup
DVD
• If you try to play a DVD that exceeds the selected rating, an error
message will appear.
• Not all discs are rated.
Enter
Use Password
Off
VCR Setup
Language
Parental
2
Press the corresponding
option.
$
,
❷
buttons to select the DVD Setup
Return
DVD Setup
VCR Setup
Language
DVD
Digital Output
DTS
Dynamic Compression On
TV Aspect Wide
PCM
Option
3
4
Press the ENTER button to select this option.
Off
Program
1
2
Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
Parental
Option
Use the
or
$
or
❷
buttons to select the desired item. Then press the
➛
❿
buttons.
Program
Select “Parental”
Using the up and down buttons, move the selection cursor to
“Parental,” then press ENTER to select.
• Digital Output
Enter
PCM : Converts to PCM(2CH) audio.Select PCM when
Return
using the Analog Audio Outputs.
3
Select “Use Password”
Enter
Enter Password
Bitstream : Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital
Audio Output.
?
-
-
-
Move the selection arrow to “Use Password,” then press the
right/left button to select from the following options:
Create
Return
Password
DVD Setup
DVD
PCM
Bitstream
Digital Output
DTS
Dynamic Compression On
PCM
VCR Setup
Language
Off
•
•
Off - Indicates that no password is required to view any DVD
disc or to change Rating Control options. No additional Rating
Control settings are necessary.
On – Indicates that a password is required to view some DVD
discs and to view Rating Control options. The menu will change
as shown.
NOTE : Be sure to select the correct Digital Output or no
audio will be heard.
Parental
Option
TV Aspect
Wide
Program
• DTS
Off : Doesn’t output digital signal.
Enter
Return
On : Outputs DTS Bitstream via digital output only.
DVD Setup
VCR Setup
Language
Parental
DVD
Select DTS when connecting to a DTS Decoder.
NOTES:
On
Use Password
Rating Level
•
The first time “Enter Password” is set to “On,” you will be
prompted to enter a password.
1
•
Dynamic Compression
Change Password
On : To select dynamic compression..
Off : To select the standard range.
•
If the “Enter Password” screen appears, then “Re-enter
Password” has already been set to “Yes.” Please skip to Step 5.
Option
Program
• TV Aspect
4
Enter Password
Enter a 4-digit password using the 0–9 buttons on the remote
control.
Depending on the type of television you have, you may want to
adjust the screen setting (aspect ratio).
Enter
•
Write your password down, and keep it in a safe place in case
you need it to change your settings later.
Return
DVD Setup
VCR Setup
Language
Parental
DVD
Use Password
5
6
Select “Rating Level”
Move the selection bar to “Rating Level,” then press ENTER to
select.
Rating Level
1
◆• How to make the DVD SETUP disappear or return to menu
screen during set up: Press RETURN button.
• Manufactured under license from Dolby Laboratories.
”Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
Change Password
Option
Program
Change Rating Level
Use the up/down buttons to select one of the following ratings:
• Level 8 Adult
• Level 7
• Level 6
• Level 4
• Level 3
• Level 2
• “DTS” and “DTS Digital Out” are trademarks of Digital
Theater Systems, Inc.
Enter
Return
• Level 5
• Level 1 Kids Safe
DVD Setup
VCR Setup
Language
Parental
DVD
◆
Digital Bitstream
All ratings above the level you select will also be blocked, e.g., if
you block Level 6, then Levels 7 and 8 will also be blocked.
Press ENTER to confirm your selection.
• If you forgot your password, press power on from a cold start
with no disc in the unit. Press the REW and F.F buttons
simultaneously on the front panel for 5 seconds.
•
Dolby Digital
MPEG2
Rating Level
Kids Safe
1
8
•
1
Rating Level
Option
Program
50
51
Download from Www.Somanuals.com. All Manuals Search And Download.
00115A DVD-V77MS-GB3 10/25/02 10:48 AM Page 52
DVD
DVD
A/V Receiver Connections
Special Playback Features
GB
GB
During DVD/CD playback you can select from the following
special playback options. To resume normal playback, press the ❿ll
(Play/Still) button.
To take full advantage of the movie theater experience that DVD
offers, you may want to connect your DVD-VCR to a complete
Surround Sound system, including an A/V Receiver and six
Surround Sound speakers.
1
1
Still
Before You Begin...
Press the ❿ll (Play/Still) button on the remote control during
playback.
•
If your A/V receiver is equipped with a Dolby Digital Decoder,
you have the option to bypass the DVD-VCR’s built-in Dolby
Digital Decoder. Use the DIGITAL AUDIO OUT connection
below.
OR
• The picture will still and the audio will mute.
• To resume playback, press the ❿ll (Play/Still) button.
• If the player is left in Still mode for 5 minutes, it will stop
automatically.
To Digital Audio Input of an A/V
Receiver with a Digital Decoder
2
3
Frame Advance (Step)
1
Digital Audio Out
While in Still mode, turn the JOG dial on the remote control to
advance one frame at a time.
Connect EITHER an optical cable OR a digital coaxial cable from
the DIGITAL AUDIO OUT jacks on the back panel of the DVD-VCR
to their corresponding Digital Audio Input jacks on your A/V
Receiver:
3
3
• Audio is muted during Frame Advance mode.
• Press ❿ll (Play/Still) to resume normal playback.
NOTE: Frame Advance operates only in the forward direction.
• Optical
• Coaxial
Skip Forward/Back
While a CD or DVD disc is in Play mode, press the Skip
• Use whichever connection is available on your A/V Receiver.
Forward/Back (❿❿
l
/
l➛➛ ) buttons on the remote control or front
panel to jump forward and backward through disc chapters/tracks.
• Skip Forward will jump to the next chapter/track.
• Skip Back will jump to the beginning of the current chapter/track.
• Press Skip Back again to jump to the beginning of the previous
chapter/track.
Search Forward/Back
While a disc is in Play mode, press and hold the Forward/Back
5
(
❿❿ /➛➛ ) buttons on the remote control or front panel to visually
search forward/backward at 2X - 4X - 8X - 16X - 32X - 128X speed.
Press ❿ll (Play/Still) button to resume normal speed.
4
Slow Motion
During playback, press the ❿ll (Play/Still) button to Still the image.
Then use the Search Forward (❿❿ ) to play in slow motion at
variable speeds.
• Each press increases the slow motion speed playback to 1/8, 1/4
or 1/2 normal speed.
• Audio is muted during slow motion playback.
• Front Panel Slow Motion Buttons - Press and hold the Forward
buttons on the front panel to activate slow motion playback.
Press the ❿ll (Play/Still) button to resume normal playback.
5
Stop/Resume
• Press the Stop button once to stop playback. To resume the
DVD/CD from the point where the disc stopped, press the ❿ll
(Play/Still) button.
• Press the
(Stop) button twice to completely stop playback.
◆
The next time you press ❿ll (Play/Still), the disc will start over
from the beginning.
52
53
Download from Www.Somanuals.com. All Manuals Search And Download.
00115A DVD-V77MS-GB3 10/25/02 10:48 AM Page 54
DVD
Using the Display Function (DVD/VCD/CD)
GB
When Playing a DVD
DVD
1
During play, press the DISPLAY button on the remote.
Enter
Off
- Current title, chapter number, elapsed time, audio, subtitle,
angle, repeat and 3D sound will be displayed.
Display
Return
A
Subtitle
Tit le
02
01
/
/
02
01
• Use the NUMBER buttons to enter a different title, then
press the ENTER button.
Chapter
Tim e
Angle
1
/ 1
• Use the
➛
,
❿
or NUMBER buttons to enter a chapter
Repeat
00 : 01 : 58
ENG 5.1CH
Off
number, then press the ENTER button.
Audio
3D
Off
• To enter the time from which you want to start, use the
$or
❷
buttons to select, then use the NUMBER buttons to enter
the time. Then press the ENTER button.
• To make the screen disappear, press the DISPLAY button
again.
VCD/ CD
Enter
Display
Return
Tra ck
Tim e
2
/
2
00 : 04 : 23
When Playing a CD/VCD
During play, press the DISPLAY button on the remote.
Audio
Repeat
Stereo
Off
1
3D
Off
-
Current track NUMBER, elapsed time, audio, repeat and
3D sound will be displayed.
•
Use the
$
or
❷
buttons to select a track. Use the
➛
,
❿
buttons
or NUMBER buttons to enter a different track number, then
press the ENTER button.
•
To enter the time from which you want to start, use the
$or
❷
buttons to select, then use the NUMBER buttons to enter the
time. Press the ENTER button.
- To make the screen disappear, press the DISPLAY button again.
◆
What is a Chapter?
Each Title on a DVD is usually divided into chapters (similar
to tracks on an audio CD).
What is a Title?
A DVD may contain several different titles. For example, if a
disc contains four different movies, each might be
considered a title.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
00115A DVD-V77MS-GB4 10/25/02 10:50 AM Page 55
DVD
Repeat Play
GB
You can repeat a single chapter, or repeat a complete title.
1
Open Repeat Menu
In Play mode, press the REPEAT button to open the Repeat menu.
1
• The current Repeat Mode will highlighted.
2
Select “Chapter”
Press the left/right buttons to select “Chapter”.
• “Chapter” will highlight when Chapter Repeat is selected.
3
4
Repeat Chapter
Press the ENTER button to repeat the current chapter.
Repeat Off Title Chapter
Select “Title”
Press the left/right buttons to select “Title”.
• “Title” will highlight when Title Repeat is selected.
5
Repeat Title
Press the ENTER button to repeat the title.
➢
•
•
•
DVD repeats play by chapter or title, CD and VCD repeat
play by disc or track.
Depending on the disc, the Repeat function may not
work.
When in VCD 2.0 mode (MENU ON mode), this function
does not work.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
00115A DVD-V77MS-GB4 10/25/02 10:50 AM Page 56
DVD
DVD
Program Play (DVD/VCD/CD)
SCREEN FIT Play
GB
GB
Programmed Playback lets you set a custom order for playback of
chapters/tracks on a DVD or CD.
1
During play, press SCREEN FIT button on remote control.
- Screen Fit will not work when the Zoom mode is active. (you can
not remove the black bars on the screen) However, Zoom mode
will work when Screen Fit is active.
1
1
2
Open Playback Mode Menu
While in Stop mode, press the MODE button.
Select “PROGRAM”
Using the left/right buttons, move the selection bar to “PROGRAM”
then press ENTER to select.
1
➢
• Various aspect ratios are available only in multiple
screen format discs.
• This function does not work when a DVD has been
recorded with a multi-camera angle format.
• On some DVDs, the black bars cannot be eliminated due
to their aspect ratio.
3
4
Select Chapter/Track
Press the up/down and left/right buttons to select the first
chapter/track in your revised playback list, then press the ENTER
button.
PROGRAM
Chapters of Title 01
Program order
01 02 03 04
05 06 07 08
09 10 11 12
13 14 15 16
17 18 19 20
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Program Playback Order
Use the up/down and left/right buttons to select the remaining
chapters/tracks, pressing Enter after each.
Clear last chapter
Clear all chapters
• Press the CLEAR button to change selections.
5
Play Revised Order
Press the ❿ll (Play/Pause) button. The disc will play back in the
custom programmed order.
PROGRAM
Chapters of Title 01
Program order
• While in playback mode, press the CLEAR button on the remote
control to cancel Programmed Play.
01 02 03 04
05 06 07 08
09 10 11 12
13 14 15 16
17 18 19 20
01 --
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Clear last chapter
Clear all chapters
DVD
Random Play (DVD/VCD/CD)
DVD
Disc Menu Navigation
DVD Random Playback lets the DVD-VCR set a random order for
playback of chapters/tracks on a DVD or CD.
Many DVDs feature their own menu systems, where you can select
Titles, Chapters, Audio Tracks, Subtitles, and special disc features,
such as movie trailers, and information on the cast. Use these
buttons to make selections in the Disc menus.
2
1
1
2
Open Playback Mode Menu
In Stop mode, press the MODE button.
?
M
Program
Ramdom On
Mode
1
2
2
Select “RANDOM”
Using the left/right buttons, move the selection arrow to “Random
On,” then press ENTER to select.
1
2
DISC MENU Button
Press to access the DVD’s Disc menu, if applicable.
2
The disc will playback automatically in random order.
Press
options.
"
,
❷
or
➛
,
❿
to navigate through DVD’s Disc menu
3
Cancel Random Play
Press the CLEAR button on the remote control to cancel Random
Play.
• Press up, down, left and right to highlight menu choices.
3
4
ENTER Button
Press to make your selections in the Disc menu.
3
➢
• Depending on the disc, the program and Random Play
function may not work.
TITLE Button
Press to access the DVD’s Title menu, if applicable.
• When in VCD2.0 mode (MENU ON mode), these
functions do not work.
4
56
57
Download from Www.Somanuals.com. All Manuals Search And Download.
00115A DVD-V77MS-GB4 10/25/02 10:50 AM Page 58
DVD
DVD
Selecting the Audio Language (Using the Audio button)
Changing the Camera Angle
GB
GB
You can select a desired language quickly and easily with the
AUDIO button.
When a DVD contains multiple angles of a particular scene,
you can select the Angle function.
7
8
9
7
8
9
1
2
Press the AUDIO button.
Use the or buttons to select the desired language on a DVD.
- The audio languages are represented by abbreviations.
ANGLE
AUDIO
0
ANGLE
AUDIO
0
1
Press the ANGLE button to see if an ANGLE (
is present at the upper left hand corner of the screen.
) mark
➛
❿
1
1
When an ANGLE mark is shown, press the ANGLE button, then
an ANGLE select icon will appear at the upper left hand corner of
the screen.
3
Use the
(On VCD/CD)
➛
or
❿
buttons to select Stereo, Right or Left.
2
3
Use the
➛
or
❿
buttons to select the desired screen angle.
➢
• This function depends on what languages are encoded
on the disc and may not work with all DVDs.
Angle 1/6
Audio
ENG Dolby Digital 5.1CH
To turn off the display, press the ANGLE button again.
• A DVD disc can contain up to 8 audio languages.
• How to have the same audio language come up
whenever you play a DVD; Refer to “Audio Language”
on page 49.
Audio
Stereo
DVD
Selecting the Subtitle Language (Using the Subtitle button)
You can select a desired subtitle quickly and easily with the subtitle
button.
1
2
3
Press the SUBTITLE button.
1
Use the
Use the
➛
or
or
❿
❿
buttons to select the desired subtitle language.
➛
buttons to determine whether or not the subtitle will
be displayed.
- Initially, the subtitling will not appear on screen.
- The subtitle languages are represented by abbreviations.
A
Subtitle ENG
OFF
➢
• This function depends on what languages are encoded on
the disc and may not work with all DVDs.
• A DVD disc can contain up to 32 subtitle languages.
A
Subtitle ENG
ON
• How to have the same subtitle language come up
whenever you play a DVD; Refer to “Subtitle Language”
on page 49.
58
59
Download from Www.Somanuals.com. All Manuals Search And Download.
00115A DVD-V77MS-GB4 10/25/02 10:50 AM Page 60
DVD
DVD
Using the Bookmark Function (DVD/VCD)
Using the Zoom (DVD/VCD)
GB
GB
The Bookmark function lets you select parts of a DVD or VCD
(MENU OFF mode) so that you can quickly find the section at a
later time.
1
During play or still mode, press the ZOOM button on the remote. A
square will be displayed on screen.
1
During play, press the MARK button on the remote. The Bookmark
icons will be displayed.
- - - - - -
Bookmark
1
2
3
Use the
want to zoom in on.
"
,
❷
or
➛
,
❿ꢀ button to select the part of the screen you
1
4
7
2
5
8
3
6
9
2
3
Use the
➛
or
❿
buttons to move to the desired bookmark icon.
Press the ENTER button.
-
During DVD play : press ENTER to zoom in 2X/4X/2X/Normal in
order.
When you reach the scene you want to mark, press the ENTER
button. The icon will change to a number (1, 2, or 3).
-
During VCD play, press ENTER to zoom in 2X/normal in order.
4
Press the MARK button to turn off the display.
+
DVD
Recalling a Marked Scene
1
2
3
During play, press the MARK button on the remote.
Use the or buttons to select a marked scene.
Press the PLAY/STILL button to skip to the marked scene.
Bookmark
1
- - - -
➛
❿
DVD
3D Sound Function
The simulated surround effect depends on the disc contents. If you
connect the unit to your stereo system, you can enhance sound
quality and produce a greater surround effect. This feature is useful
when you are using the DVD player with a two channel stereo
through the analog outputs.
(Discs which are recorded with LPCM or DTS will not work. When
the DIGITAL OUTPUT is set to BITSTREAM in the SETUP MENU,
the 3D Sound function will not work.)
DVD
Clearing a Mark
1
1
2
During play, press the 3D button. The 3D SOUND mark will be
displayed on screen.
1
During play, press the MARK button on the remote.
2
Use the
➛
or
❿
buttons to select the bookmark number you want
Press the
"or
❷
buttons to turn the 3D Sound feature on or off.
to delete.
3D Sound Off
3
Press the CLEAR button to delete a bookmark number. Press the
MARK button to turn off display.
1
➢
• 3D Sound is possible only on discs recorded using
DOLBY SURROUND or DOLBY DIGITAL. However,
some of these discs do not contain rear channel sound
signals.
➢
• Up to three scenes may be marked at a time.
• When in VCD 2.0 mode (MENU ON mode), this
function does not work.
• Depending on the disc, the Bookmark function may not
work.
• Depending on the disc, the Zoom and 3D Sound
function may not work.
60
61
Download from Www.Somanuals.com. All Manuals Search And Download.
00115A DVD-V77MS-GB4 10/25/02 10:50 AM Page 62
DVD
DVD
MP3 Play
Memory Stick
GB
GB
When an MP3 Disc is inserted into the DVD-VCR, the first song file
of the first folder plays.
What is a Memory Stick?
0 1 _INTRO(# # # # )
0 0 :0 4
1 2
O ff
"Memory Stick" is a new compact, portable and versatile IC (Integrated Circuit) recording medium with
a data capacity that exceeds a floppy disk.
"Memory Stick" is specially designed for digital data exchange among "Memory Stick" compatible
devices.
1
Press STOP to stop playback of the first song file, then press
RETURN to display the music folder menu on the right side of the
screen. Up to 8 music folders can be displayed at a time. If you
1 3
Dire cto ry
File s
DJDO C
EU# #
LAYER-II TYP
HJLIN
JACKKI
KIMHJ
Se o ta iji2
SES
YO LIN G
Bru ce
0 1 _IN TRO (# # # # )
0 2 _# # (Aco u stic)
0 3 _L.I.E
0 4 _N u cle a r_Lu n c
0 5 _# # #
0 6 _Bo o g i_N ig h t
0 7 _Ru n _to _Yo u
0 8 _# # # # _# #
1 1 _So m e d a y
Djd o c5 -1 3
have more than 8 folders on a disc, press the
bring them up on the screen.
➛
or
❿
buttons to
Because it is removable, the "Memory Stick" can also be used for external data storage.
Enter
There are two types of "Memory Sticks".
One is the regular "Memory Stick" and the other is the "MagicGate Memory Stick" equipped with
"MagicGate" copyright protection technology.
Return
2
Use the
press ENTER. Use the
Press ENTER to begin playback of the song file.
"
or
❷
buttons to select the desired music folder, the
"
or ❷ buttons again to select a song file.
"MagicGate" is a copyright protection technology that uses encryption.
➢
➢
Program/Random playback
1
2
MagicGate Memory Stick
Can be used for both copyright-protected and regular data.
Press the MODE button, then the UP/DOWN buttons, to
switch between the RANDOM and PROGRAM modes.
See page 56 for more information on these modes.
Memory Stick
Can be used for regular data only.
NOTE :
Press the REPEAT button to hear a song file Track
repeatedly. Press Repeat again to the Disc Repeat mode.
Press Repeat again to release the Repeat mode.
Depending on the disc, the Program and Random Play
function may not work.
➢
➢
MagicGate Memory Sticks with copyright-protected data cannot be used in this unit.
To resume normal play, press the CLEAR button.
It does not work SETUP MENU in CD-R (MP3).
62
63
Download from Www.Somanuals.com. All Manuals Search And Download.
00115A DVD-V77MS-GB4 10/25/02 10:50 AM Page 64
DVD
DVD
Memory Stick
Memory Stick
GB
GB
Precautions on attaching/removing the "Memory Stick"
Precautions on handling the "Memory Stick"
1
If it is not fully inserted, until you hear an audible "click", the "Memory Stick" will not work.
The Memory Stick works in the DVD MODE only.
2
If you inadvertently remove the "Memory Stick" or turn off the power while using the DPM (Digital Photo
Manager) or DAM (Digital Audio Manager) function, the recorded data may become corrupted.
1
Data can become corrupted in the following instances:
3
To remove the "Memory Stick" during operation, see page 68 .
- When the "Memory Stick" is taken out or the power is turned off while using the DPM
(Digital Photo Manager) or DAM (Digital Audio Manager) function.
- When using the "Memory Stick" in a location subject to static electricity or electric noise.
To format the "Memory Stick"
2
3
4
5
6
7
8
9
Memory sticks can only be read in this unit, not written.
Do not attach any other material than the supplied label on the label space.
Attach the label so that it does not stick out from the proper attachment location.
When moving or storing the "Memory Stick", use the storage case.
Do not touch the "Memory Stick" connector with your finger or metallic objects.
Do not bend, drop or apply strong shock to the "Memory Stick."
Do not disassemble or modify the "Memory Stick."
1
2
3
4
5
Do not format the "Memory Stick" using your computer. If you format the "Memory Stick" using the
computer, you cannot use it with "Memory Stick"compatible devices.
If you need to format the "Memory Stick," use a "Memory Stick" compatible device (If formatted, all data
previously recorded on the "Memory Stick" will be erased.)
If you use a "Memory Stick" that has been initialized using a computer or initialize a "Memory Stick"
attached to a camera using USB connection, further operation is not guaranteed.
Be careful not to optimize the "Memory Stick" from a computer running a Windows operating system.
The life of the "Memory Stick" will be shortened.
Do not allow the "Memory Stick" to get wet.
Do not compress the data recorded on the "Memory Stick."
A compressed file cannot be played back on this unit.
Software Compatibility
1
Depending on the type of application software used, the file size of a still image may become larger when it
is opened.
2
3
Depending on the type of application software used, only the first frame (thumbnail) of the clip motion file
may be displayed.
An image file that has been modified using an image processing software may not open if it is converted into
a different file format to play back with this product.
64
65
Download from Www.Somanuals.com. All Manuals Search And Download.
00115A DVD-V77MS-GB4 10/25/02 10:50 AM Page 66
DVD
DVD
Memory Stick
DAM (Digital Audio Manager) Playback
GB
GB
MP3 Playback
Memory Stick functions applicable to DPM and DAM
1
Press Stop if in play mode.
Item
DPM (Digital Photo Manager)
DAM (Digital Audio Manager)
2
3
Press the M.STICK button on the remote.
Insert the Memory Stick encoded with MP3 files into the
Memory Stick Slot.
JPEG Image ( .jpg)
MP3 Music File ( .mp3)
*
File Format
*
4
Press the UP/DOWN buttons on the remote control to select
Digital Audio Manager, and then press the ENTER button.
1. All files in JPEG format that have less than 1600 x
1200 resolution can be played back with DPM.
(JPEG files smaller than 1.5MB can be viewed
with Photo View.)
•Your selection is highlighted with yellow borders.
Use the UP/DOWN buttons to select the desired song.
Press the ENTER button to start play.
5
6
- No limit to file size
File Size
1
2
3
4
5
2. For JPEG data without thumbnail information,
"Thumbnail not available" will be displayed in The
Thumbnail View, however, they can still be played
back in Photo View.
*
*
• Press the DISC MENU button to return to the Start menu.
- If the PLAY button is pressed during the playback of an
MP3 file, the song will start from the beginning again.
- If the SKIP button is pressed during the playback of an
MP3 file,the next song will be played.
6
7
*
*
*
*
8
*
1. Still image files with ".jpg" extension that have
been recorded with a digital camcorder or digital
still camera equipped with Memory Stick functions
2. JPEG image files stored in Memory Stick using a
Memory Stick adaptor for PC
Screen Configuration
3. JPEG image files stored in CD-R/RW using CD
Writer on PC, have to be stored using one of
directory formats as follows (Capitalize all letters
of directory name):
1. FOLDER UP: Use to move “up” a folder when you have multiple folders.
All files in MP3 format that have been
downloaded from a PC or PDA to
Compatibility
2. PLAYLIST: Shows the playlist.
Memory Stick ( .mp3)
*
1) \DCIM\<dir>\ .jpg
*
3. INFO: Shows information about the Selected song being
played.
2) \PREVIEWS\<dir>\ .jpg
*
3) \IMAGES\<dir>\ .jpg
*
4. EXIT: Takes you to the Start menu.
4) \ .jpg
*
5. Shows brief information about the selected song.
6. The title of the song currently playing
- The size of each <dir> cannot be over 50MB.
[ case 1), 2), 3) ]
- When storing files in root directory [ case 4) ],
the size of root directory also cannot be over
50MB.
7. Shows a list of MP3 files and folders found in the memory stick.
8. Shows the title and playback time of the currently playing song in the scroll
box.
• lf the REPEAT button is pressed, the following displays will
appear:
Directories Supported
• Memory Stick DPM
MP3 music files recorded on Memory
Stick can be played back.
However, although non-MP3 files are
also displayed on DAM, they cannot be
played back.
-
: If the REPEAT button is pressed, all MP3 files in a given folder will
be played back repeatedly in the order they are listed under that
folder.
-DCIM\<dir>\ .jpg
Main Functions
*
-
-
: If the REPEAT button is pressed once again, the Shuffle function is
activated. (All MP3 songs in a list are played once in random order.)
• Picture CD DPM
(Compatible with Picture CD of Kodak, Fuji, Qss
(Noritus), and Konica)
: If the REPEAT button is pressed yet once again, the Continuous
Shuffle function is activated. (All MP3 songs in a list are played in
random order.)
- If the REPEAT button is pressed still yet once again, the Repeat
function is deactivated.
66
67
Download from Www.Somanuals.com. All Manuals Search And Download.
00115A DVD-V77MS-GB4 10/25/02 10:50 AM Page 68
DVD
DVD
DPM (Digital Photo Manager) Playback
Memory Stick Pull out
GB
GB
View Photo Album (Photo CD)
1
If using DPM (Digital Photo Manager) or DAM (Digital Audio
Manager), move to Exit, and then press the
ENTER button to exit to Disc Menu.
1
Insert the Memory Photo CD containing JPEG files into the DVD
TRAY slot.
2
3
4
Move to the "STOP MEMORY STICK" function at the bottom
of the menu and then press the ENTER button.
2
3
The Photo CD will be auto play.
Press the UP/DOWN buttons on the remote control to select
DIGITAL PHOTO MANAGER, and then press the ENTER button.
When the "PLEASE REMOVE MEMORY STICK" message
appears on the top of the menu, remove the Memory Stick.
•Your selection is highlighted with yellow borders.
If the above sequence is not followed and the Memory Stick
is inadvertently removed or the power is turned off, the data
recorded on the Memory Stick may become corrupted.
4
5
JPEG files in the Photo CD will be displayed on the screen in the
order of their recording.
Use the UP/DOWN/LEFT/RIGHT buttons to select the image you
want, and then press the ENTER button to display it in full view on
the TV screen, or use the UP/DOWN/LEFT/RIGHT buttons to
select SLIDE SHOW press ENTER, and the silde show will begin.
Slides will be displayed in order for a few seconds at a time.
DVD
DPM (Digital Photo Manager) Playback
View Photo Album (Memory Stick)
1
2
Press Stop if in play mode.
Press the M.STICK button on the remote and the screen to the
right will appear.
Screen Configuration
1
2
3
4
Insert the Memory Stick/Photo CD containing JPEG files into the
Memory Stick Slot.
1
EXIT: Takes you to the Start menu.
Press the UP/DOWN buttons on the remote control to select
DIGITAL PHOTO MANAGER, and then press the ENTER button.
2
3
SLIDE SHOW : Begins the slide show.
3
4
•Your selection is highlighted with yellow borders.
5
PAGE : Highlight the PAGE menu item and use
LEFT/RIGHT buttons to move to the next page of
thumbnails.
5
6
JPEG files in the Memory Stick/Photo CD will be displayed on the
screen in the order of their recording.
Use the UP/DOWN/LEFT/RIGHT buttons to select the image you
want, and then press the ENTER button to display it in full view on
the TV screen, or use the UP/DOWN/LEFT/RIGHT buttons to
select SLIDE SHOW and then press the ENTER button to begin
the slide show. Slides will be displayed in order for a few seconds
at a time.
4
5
ROLL: Allows navigation when there are multiple directories
below ‘/DCIM’ of Memory Stick. (See page 66)
Photo lnformation.
➢
•
The Auto Power Off function does not work while any
DPM function is active.
68
69
Download from Www.Somanuals.com. All Manuals Search And Download.
00115A DVD-V77MS-GB4 10/25/02 10:50 AM Page 70
DVD
DVD
Slide Show
Slide Show Order
GB
GB
1
2
Use the UP/DOWN/LEFT/RIGHT buttons on the remote control to select
Slide Show.
1
Use the UP/DOWN/LEFT/RIGHT buttons to select Slide Show and
press ENTER.
• Your selection is highlighted with yellow borders.
2
3
Use the LEFT/RIGHT buttons to select Set Order and press
ENTER.
Press the ENTER button and the Slide Show will begin.
• To execute any function or option, be sure to press
the ENTER button after selecting the menu item you want.
Use the UP/DOWN/LEFT/RIGHT buttons on the remote control to
select the image you want to move, and then press the ENTER
button.
• If there is no input for 5 seconds, the Slide Show menu will
disappear, and the slide show will begin.
• Your selection is highlighted with yellow borders.
• To view the Slide Show menu, press the UP/DOWN/
LEFT/RIGHT button on the remote control. The slide show will
stop and the menu will be displayed.
4
5
Use the UP/DOWN/LEFT/RIGHT buttons on the remote control to
select the location you want to move the image to, and then press
the ENTER button.
• Select the PLAY menu item to resume.
• Source location is indicated with yellow borders.
Destination location is indicated with green borders.
After moving the images to another location, you can begin the
slide show by choosing START SHOW.
Menu Description
• For those images you don't want to include in the
slide show, select the image from the Slide Show Order screen,
and then press the CLEAR button.
• ALBUM : Takes you back to the Photo Album.
• TIMER: Indicates the delay between images in a slide show.
• REPEAT : If ON is selected, the slide show will repeat indefinitely.
• SET ORDER: Use to change the order of images in a slide show.
• PLAY: Begins the slide show.
➢
➢
Slide Show order will reset when you turn player off.
Menu Description
• ALBUM: Takes you to Photo Album.
• UNDO: Restores the image you moved most recently to its
original location.
• RESET: Restores all the images to their original locations.
• START SHOW: Begins the slide show.
70
71
Download from Www.Somanuals.com. All Manuals Search And Download.
00115A DVD-V77MS-GB4 10/25/02 10:50 AM Page 72
DVD
DVD
Photo View
Edit Photo
GB
GB
1
2
Use the UP/DOWN/LEFT/RIGHT buttons on the remote control to
select the desired image from the Photo Album screen, and then
press the ENTER button.
1
From the Photo View screen, use the UP/DOWN/LEFT/RIGHT
buttons to select EDIT, and then press the ENTER button.
• The Edit Photo menu appears.
• The selected image will appear on the TV screen.
2
Use the UP/DOWN/LEFT/RIGHT buttons on the remote control to
move to the menu item you want, and then press the ENTER
button.
Use the UP/DOWN/LEFT/RIGHT buttons on the remote control to
move to the menu item you want, and then press the ENTER
button.
• If there is no input for 5 seconds, the Edit Photo menu will
disappear. To view the menu again, press the
UP/DOWN/LEFT/RIGHT and PLAY/STOP/ENTER button.
• If there is no input for 5 seconds, the Photo View menu wil
disappear. To view the menu again, press the
UP/DOWN/LEFT/RIGHT button.
Menu Description
Menu Description
• ALBUM : Takes you back to the Photo Album.
• FLIP: Shows the mirror image.
• ALBUM: Takes you to Photo Album.
• EDIT: You can apply various effects to the selected image.
This is only for viewing, the edited image cannot be saved.
• FILTERS 1234: You can apply various effects to the selected image.
• SLIDE SHOW: Begins the slide show.
1. Black and white filter.
2. Sepia (brown) filter.
3. Image negative filter.
4. Color negative filter.
• ROTATE: Each time the ENTER button is pressed, the image will
rotate clockwise 90 degrees.
• ZOOM: Each time the ENTER button is pressed, the image will
enlarge up to 6X
- To restore the image to its original state, select RESET from
the menu, and then press the ENTER button.
Normal --> 2X --> 4X ---> 6X --> Normal
• PAN: Press the ENTER button followed by the UP/ DOWN/ LEFT or
• COLOR R + - G + - B + -
Adjust Red, Green and Blue color balances each time ENTER is
RIGHT button to move the image in the direction of the arrow.
pressed.
• PHOTO 1 OF 11
:
When the Photo menu item is highlighted, the
LEFT/RIGHT button move to the next
previous images.
• SOFTEN 123: Highlight 1 of 3 desired effects: 1) softens
edges, 2) blurs the image and 3) creates an
impressionist painting effect.
• RESET: Restores the image to its original state before the
➢
You can start the Slide Show by pressing the PLAY button in
the Photo View mode. Refer to the Slide Show Menu on
page 70.
change was made.
• DONE: Returns you to the Photo View screen.
72
73
Download from Www.Somanuals.com. All Manuals Search And Download.
00115A DVD-V77MS-GB4 10/25/02 10:50 AM Page 74
DVD
MP3 Play (
CD-R MP3 disc requirements)
Technical Specifications
GB
GB
When playing CD-R MP3 discs, please follow the recommendations below:
Rated voltage
Power consumption
Weight
220 - 240V~, 50Hz
25 Watts
• Your MP3 files should be ISO 9660 or JOLIET format.
4.5 Kg
ISO 9660 format and Joliet MP3 files are compatible with Microsoft's DOS and Windows, and
with Apple's Mac. These two formats are the most widely used.
General
Input
Size
430mm X 330mm X 100mm
+5°C ~ +35°C
Operating ambient temperature
Installation conditions
Operation position : Horizontal,
Relative humidity : Below 75%
RCA jack : 1.0Vp-p (unbalanced) 75Ω
RCA jack : -8dBm, 47Kohm unbalanced
UHF 21-69 (Initial CH36) : Newzealand model
UHF 28-69 (Initial CH38) : Australia model
RCA jack
• When naming your MP3 files do not exceed 8 characters, and place ".mp3" as the file
extension. General name format of: Title.mp3. When composing your title, make sure that you
use 8 characters or less, have no spaces in the name, and avoid the use of special characters
including: (.,/,\,=,+).
Video input (Rear)
Audio input (Rear)
RF out
• Use a decompression transfer rate of at least 128 Kbps when recording MP3 files.
Sound quality with MP3 files basically depends on the rate of compression/decompression you
choose. Getting audio CD quality sound requires an analog/digital sampling rate (conversion
to MP3 format) of at least 128 Kbps and up to 160 Kbps. However, choosing higher rates, like
192 Kbps or more, only rarely give better sound quality. Conversely, files with sampling rates
below 128 Kbps will not be played properly.
Audio (DVD, VCR)
Audio (DVD only)
Video (DVD, VCR)
Video (DVD only)
Output
Digital audio out (OPTICAL, COAXIAL), RCA, L, R
RCA jack
S-Video out
COMPONENT out : RCA jack
VHS type video tape,
• Do not try recording copyright protected MP3 files.
Tape format
Certain "securized" files are encrypted and code protected to prevent illegal copying. These files
are of the following types: Windows MediaTM (registered trade mark of Microsoft Inc) and
SDMITM (registered trade mark of The SDMI Foundation). You cannot copy such files.
S-VHS type video tape (Playback only)
PAL, MESECAM, NTSC4.43, NTSC playback on PAL TV
Color system
Tuning system
B/G, D/K : Newzealand model
B/B : Australia model
• Your DVD player only accepts one level of file directory. Consequently you must choose:
- either to save all your MP3 recording files at the root of the disc;
VCR
DVD
Video S/N
Above 43dB (standard recording)
Above 240 lines (standard recording)
Above 68dB (Hi-Fi), 39dB (Mono)
20Hz - 20KHz (Hi-Fi)
- and/or create folders in the directory for each artist or music type (e.g.classical, rock, jazz, etc)
Resolution
Audio S/N
• Important: The above recommendations cannot be taken as a guarantee that the DVD player will
play MP3 recordings, or as an assurance of sound quality. You should note that certain
technologies and methods for MP3 file recording on CD-Rs prevent optimal playback of these
files on your DVD player (degraded sound quality and in some cases, inability of the player to
read the files).
Audio frequency characteristics
Disc
DVD, CD (12cm), CD (8cm), VIDEO-CD (12cm)
95dB
Audio S/N
Audio dynamic range
105dB
74
75
Download from Www.Somanuals.com. All Manuals Search And Download.
00115A DVD-V77MS-GB4 10/25/02 10:50 AM Page 76
Problems and Solutions (VCR)
Troubleshooting Guide (DVD)
GB
GB
Before contacting the Samsung after-sales service, perform the following simple checks.
Before requesting service (troubleshooting)
Problem
Explanation/Solution
No power
➢
➢
Check that the power plug is connected to a wall outlet.
Have you pressed the STANDBY/ON button?
Problem
Action
Page
➢ Ensure that the disc is installed with the label side facing up.
➢ Check the region number of the DVD.
➢ This player cannot play CD-ROMs, DVD-ROMs, etc. Insert a DVD, a
VIDEO-CD or a CD.
You cannot insert a video cassette
➢
A video cassette can only be inserted with the window
side up and the safety tab facing you.
Disc does not play.
P6
The television programme was not recorded
➢
➢
➢
Check the DVD-VCR aerial connections.
Is the DVD-VCR tuner properly set?
Check if the safety tab is intact on the cassette.
➢ 5.1 channel sound is reproduced only when the following conditions
are met. :
1) The DVD-VCR player is connected with the proper amplifier
2) The disc is recorded with 5.1 channel sound.
3) The “Digital out” is selected “Bitstream”.
➢ Check whether the disc being played has the “Dolby 5.1 ch” mark on
the outside.
➢ Check if your audio system is connected and working properly.
Timer recording was unsuccessful
➢
➢
➢
Was the STANDBY/ON button pressed to activate the timer?
Re-check the recording start/stop time settings.
If there was a power failure or interruption during timer
recording, the recording will have been cancelled.
5.1 channel sound is not
being reproduced.
P51
No playback picture or the picture
is distorted
➢
➢
Check to see if you are using a prerecorded tape.
You cannot see normal broadcasts
Check the TUNER/EXTERNAL setting. It should be on
TUNER.
Check the TV/VCR aerial connections.
➢ The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is
out of range.
The
icon appears on
screen.
➢
➢
Noise bars or streaks on playback
Press the PROG/TRK (
"
or
❷) buttons to minimize this
effect.
When the
during playback, the still picture
has severe “noise bars” streaks
❿
button is pressed
➢
➢
A still picture may have “noise bars”, depending on the
condition of the tape. Press the PROG/TRK ( or ) buttons
during SLOW motion to minimize this effect.
II
Playback mode differs from
the Setup Menu selection.
"
❷
➢ Some of the functions selected in the DVD SETUP may not work
properly if the disc is not encoded with the corresponding function.
P48-51
P51
Video Head Cleaning
If poor pictures appear on a variety of cassettes, the video
heads may need cleaning. This is not a common problem
and unless it appears, the heads should not be cleaned.
When cleaning the video heads, read all instructions
provided with the head cleaning cassette. Incorrect head
cleaning can permanently damage the video heads.
The screen ratio cannot be
changed.
➢ The Screen Ratio is fixed on your DVDs.
➢ Make sure you have selected the correct Digital Output in the Audio
Options Menu.
No audio.
P51
➢ Press power on from a cold start with no disc in the unit. Press the
❿❿ and ➛➛ buttons simultaneously on the front panel for five
seconds. The Select Menu Language display will appear. Select the
desired language button. Press the SETUP button on the remote
If when tuning in your TV to the DVD-VCR
your TV does not find the screen or the
screen when found suffers from
interference, it may be due to the
DVD-VCR output channel clashing with
the normal TV transmissions in your area.
To prevent this you will need to change the
DVD-VCR output channel in the following
way
1. Remove the aerial input plug from the socket marked (aerial
symbol) on the rear of the DVD-VCR.
2. Carry out the instructions “Tuning Your Television for the DVD-
VCR” (see page 14).
3. Carry out the instructions “Setting the DVD-VCR output
Channel” (see page 23), move the channel number
several channels down from the original setting.
(example: from 38 to 40).
4. Replace the aerial plug into the socket marked (aerial symbol)
on the rear of the DVD-VCR.
P50
Forgot password
control to select the Parental Mode. Use the
Parental option, press the ENTER button, the Parental Mode is now
unlocked as indicated on the display. Press button and the
",❷ꢀbuttons to select
➛
,❿
Create Password display will appear. You can now set your rating
level and change your password to a new number.
5. Re-tune your TV to the DVD-VCR again by following
instructions “Tuning Your Television for the DVD-VCR”
(page 14).
6. If the problem still exists repeat steps 1 to 5 moving several
more channels away from the original setting.
If you experience other
problems.
➢ Go to the contents and find the section of the instruction book that
contains the explanations regarding the current problem, and follow
the procedure once again.
➢ If the problem still cannot be solved, please contact your nearest
authorized service center.
If you are unable to solve the problem after reading the above instructions, note:
➢
➢
➢
The model and serial number on the rear of your DVD-VCR
The warranty information
A clear description of the problem
Then contact your nearest SAMSUNG after-sales service.
76
77
Download from Www.Somanuals.com. All Manuals Search And Download.
00115A DVD-V77MS-GB4 10/25/02 10:50 AM Page 78
THIS APPLIANCE IS DISTRIBUTED BY
ELECTRONICS
AK68-00115A
Download from Www.Somanuals.com. All Manuals Search And Download.
|