Instruction
Manual
DVD-V3300
POWER
O
P
E
N
/
C
L
O
S
E
CHANNEL
DVD/VCR PROGRESSIVE
LINE IN
2
POWER
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Table of Contents
◆ Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
2
◆ 5 - DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
◆
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
◆
◆
◆
◆
◆
◆
◆
◆
◆
Disc Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Subtitle Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Digital Output. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
DTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Dynamic Compression . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
PCM Down Sampling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
TV Aspect Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Black Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Alt Video Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Parental. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
◆ Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7
7
7
8
◆
◆
◆
Feature Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Unpack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Disc Type and Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
◆ 1 - System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9
9
◆
◆
◆
◆
◆
◆
Front Panel Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
◆
◆
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Front Panel Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Remote Control Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Insert Batteries into Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Using the TV Buttons on the Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
◆ 6 - DVD Sound Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
A/V Receiver Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
◆
◆ 2 - Getting Started. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Basic Connections/Auto Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
◆ 7 - DVD Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
Special Playback Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Disc Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
EZ View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Title/Chapter/Time Selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Angle View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Subtitle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
A to B Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Repeat Chapter/Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Bookmarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
MP3/WMA Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Program Play & Random Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Picture CD Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
3D Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Function (DVD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
◆ 3 - Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
◆
◆
◆
◆
Deck Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Basic DVD Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Basic VCR Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Basic TV Tuner Operations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
◆ 4 - System Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
◆
◆
◆
◆
◆
◆
◆
◆
◆
On-Screen Menu Navigation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Manual Clock Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Tuner Band Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
RF Output Channel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Auto Channel Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Channel Add/Delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Front Panel Dimmer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Auto Power Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
◆ 8 - VCR Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
◆
◆
◆
◆
◆
Special VCR Playback Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Tracking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Auto Play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
S-VHS Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Variable Search System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Feature Summary
DVD+VCR Features
• Perfect compatibility to play back DVDs, audio CDs, MP3 discs or VHS Tapes.
• Enjoy a DVD movie while recording a TV show to the VCR.
• Auto Setup instantly finds the time and runs channel search.
• RF inputs and outputs for all kinds of TVs available.
• Composite, S-Video, and Component Video outputs.
• Universal remote provides the full operation on DVD+VCR.
• On-Screen Program (English/French/Spanish).
◆ 9 - VCR Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
◆
◆
◆
◆
Basic Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Special Recording Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
One Touch Recording (OTR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Record Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
DVD Features
◆ 10 - Timer Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
• 10-bit video digital to analog converter and 27MHz advanced digital filter.
• Playback of 96KHz/24-bit sources.
• DTS digital output for DTS-enhanced DVDs.
• Playback MP3-CDs.
◆
How to Set a Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
◆
Function(VCR). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
◆ Appendix A - Advanced Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
VCR Features
• Hi-Fi Stereo VCR.
◆
◆
◆
◆
S-Video/Component Video Connections (for DVD). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Stereo Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Monitor TV Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Connecting Other Video Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
• Superior slow motion and stop action (with 4 heads).
• Playback of S-VHS tapes with a better than standard resolution.
• INTRO Scan, Zero Return, and END Search.
• 7-event/1 month timer recording.
• Time remaining counter, real time counter.
◆ Appendix B - Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Note
◆
Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
*Discs which cannot be played with this player.
*Ability to play back may depend on recording
• DVD-ROM
• CD-ROM
• CDI
• DVD-RAM
• CDV
conditions.
• DVD-R
• CD-RW
• DVD+RW, -RW
• HD layer of Super Audio CD
• CDGs play audio only, not graphics.
Unpack
When you unpack the DVD+VCR, please check the following list of items is included in the
packing case.
DVD-VCR
User’s Guide
(AK68-00164A)
CHANNEL
DVD/VCR PROGRESSIVE
LINE IN
2
POWER
Remote Control
RCA cable for
Audio/Video connection
RF (Radio Frequency)
Antenna Cable
1.5V “AAA” Batteries- 2EA
7
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel Overview
Disc Type and Characteristics
This DVD player is capable of playing the following types of discs with the corresponding logos:
Disc Types
(Logos)
Max.
Recording
Types
Disc Size
1
2
3
4
5
6
7
Characteristics
Playing Time
Single-sided
240 min.
Double-sided
480 min.
• DVD contains excellent sound
and video due to Dolby Digital
and MPEG-2 system.
• Various screen and audio
functions can be easily
selected through the on-
screen menu.
DVD
5"
Audio
+
Video
CHANNEL
DVD/VCR PROGRESSIVE
LINE IN
2
POWER
Single-sided
80 min.
Double-sided
160 min.
31/2"
V
I
D
E
O
AUDIO-CD
8
9
10 11 12 13 14
15
16 17 18
• CD is recorded as a
Digital Signal with better
audio quality, less
distortion and less
deterioration of audio
quality over time.
74 min.
20 min.
5"
Audio
31/2"
1
DVD DECK
12 FAST-FORWARD/FWD
13 RECORD
2
3
4
5
6
7
8
9
DVD OPEN/CLOSE
VCR DECK
14 EZ VIEW
CHANNEL
/
15 FRONT PANEL DISPLAY
DVD-VCR SELECT
PROGRESSIVE
VCR EJECT
POWER
16 LINE IN 2 COMPOSITE VIDEO JACK
17 LINE IN 2 LEFT AUDIO JACK
18 LINE IN 2 RIGHT AUDIO JACK
Disc Markings
DIGITAL
SOUND
~
STEREO
NTSC
STOP
10 REWIND/REV
• Digital
Audio disc
• DTS disc
• MP3 disc
• Play
Region
Number
• NTSC broadcast
system in U.S.A,
Canada, Korea,
Japan, etc.
• Dolby
Digital disc
• Stereo disc
11 PLAY/PAUSE
Play Region Number
Both the DVD player and the discs are coded by region. These regional codes must
match in order for the disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is described on the rear panel of the player.
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Overview
Rear Panel
1
2
3
4
5
6
7
POWER
SHUTTLE <</>>
100+
POWER
OPEN/CLOSE
1
2
18
DVD
TV MUTE. AUDIO
VOLUME +/–
REWIND
SKIP BACK
STOP
19
20
8
9
SUBTITLE
10 MENU
11 UP
12 LEFT
13 DOWN
14 SPEED
15 RECORD
16 CLEAR
17 MODE
3
4
1
2
3
4
5
6
7
8
9
21
22
1
2
3
4
5
S-VIDEO OUT
6
7
8
9
LINE IN 1
DIGITAL AUDIO OUT(COAXIAL)
DIGITAL AUDIO OUT(OPTICAL)
COMPONENT VIDEO OUT
AUDIO LINE OUT TO TV
LINE OUT TO TV (COMPOSITE)
RF ANTENNA INPUT
RF OUT TO TV
5
6
REPEAT
18 OPEN/CLOSE
19 0-9
23
24
20 TV/VCR
21 VCR, TV SELECT
22 INPUT SEL.
F.ADV/SKIP
23 CHANNEL
TRACKING
24 FAST-FORWARD
SKIP NEXT
25 PLAY/PAUSE
26 INFO.
27 RETURN
28 ENTER
29 RIGHT
30 EZ VIEW
31 DISC MENU
32 MARK
(S-VIDEO OR COMPONENT)
7
8
25
26
9
10
27
28
29
Front Panel Display
11
12
1
2
3
4
5
13
14
15
30
31
32
33
16
17
SEARCH
33 ANGLE
TIMER
STEREO
6
7
8
1
2
3
When the light is on, DVD is operating.
DVD or CD media is loaded.
6
A DVD with a DTS soundtrack is loaded.
7
The Hi-Fi track of a VHS videotape is playing
(The current TV program or video is broadcast in
Stereo.)
The time, counter position, time remaining or
current deck status is indicated.
Insert Batteries into Remote
8
Timer Recording is in progress.
4
5
VHS videotape is loaded.
VCR is activated.
It also blinks when you pause VCR.
• Remove the battery cover on the remote
• Insert two 1.5V “AAA” batteries as shown, making sure of the correct
polarities(+/-)
• Slide the cover back onto remote.
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV Buttons on the Remote Control
Basic Connections/Auto Setup
You will need to connect the DVD-VCR to a TV and run Auto
Setup. The Auto Setup will automatically searche for channels and
then set your DVD-VCR's internal clock.
Your VCR remote control will work with Samsung televisions and
compatible brands.
To determine whether your television is compatible, follow the instructions
below.
NOTES:
1
POWER
OPEN/CLOSE
• See Appendix A for Advanced Connections.
• Standard RF or Line connection between your TV are required to
run DVD+VCR setup menu, even if you connect S-Video
or Component Video Output for a better picture quality.
1
2
3
Switch your television on.
1
Point the remote control towards the television.
From Antenna or Cable
Hold down the TV button and enter the two-figure code
corresponding to the brand of your television, by pressing the
appropriate numeric buttons.
1
2
Connect the RF Antenna Cable to your DVD-VCR
Connect an external indoor/outdoor antenna or wall outlet antenna
cable to the Ant-In jack on the rear panel.
Brand
Codes
Brand
Codes
Connect your DVD-VCR to a TV
Choose one of the following methods:
3
2
SAMSUNG
SHARP
SONY
01, 14, 15, 23
02, 16, 22
03
LOEWE
ZENITH
LG
MAGNAVOX 04
EMERSON
SANYO
DAEWOO
NOBLEX
TELEFUNKEN 26
28
17
06, 08, 18
2
RF Connection
2
Using the supplied RF antenna cable, connect the OUT jack (TO
TV) on the back panel of your DVD-VCR to your TV’s Antenna
Input.
RCA
07, 29
09
12, 24
11
3
To TV’s Antenna Input
TOSHIBA
PANASONIC
JVC
21
05, 20
19
Line Connection
Using an RCA-type audio/video cable (red, white, yellow), connect
the LINE OUT jacks on the back panel of your DVD-VCR to your
TV's Line In jacks. Use the three cables as follows: red for right
audio, white for left audio, and yellow for video.
NOTE: If your TV is equipped with RCA jacks, it is better to use the
Line Connection method.
HITACHI
MITSUBISHI
NEWSAN
10
13
27
25
3
4
Result: If your television is compatible with the remote control, it
will switch off. It is now programmed to operate with the
remote control.
3
4
Plug In
Your DVD-VCR's power should be plugged into a standard
120V/60Hz wall outlet. Avoid pressing any buttons on the remote
control or on the unit during an Auto Setup. While your DVD-VCR
is running an Auto Setup, “AUTO” will blink. When Auto Setup is
complet, the current time will be displayed on the front panel. In
case Auto Clock set fails to locate a channel to set the clock, you
should set the clock manually. See page 18.
◆
If several codes are indicated for your television brand, try
each one in turn until you find one that works.
4
◆
When you change the batteries in the remote control, you
must reprogram the code, following the same procedure.
You can then control the television using the following buttons.
Turn On your DVD-VCR
Turn on the power by pressing the POWER button on the remote
control or on the front panel of the unit.
Button
Function
5
5
6
Turn On your TV
POWER
Used to switch the television on and off.
Used to select an external source.
Used to adjust the volume of the television.
Used to select the required channel.
Used to toggle the sound on and off.
◆
Turn on the TV by pressing the POWER button.
INPUT SEL.
◆
◆
◆
POWER
OP
Set the TV to Channel 3, 4 or Line
The same channel you selected in Step 2 above must be used. If
you are using the Line Connection method, set your TV to its Line
Input.
VOL
+
or
–
4
POWER
CH ( or
MUTE
)
4
◆
The various functions will not necessarily work on all
televisions. If you encounter problems, operate the
television directly.
◆
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Deck Control Buttons
Basic VCR Operation
The DVD-VCR uses one set of controls to operate both decks. The
following buttons are helpful in successfully controlling each deck.
To play a standard VHS videotape, just insert it into the VCR deck
and press the Play button. You can turn on the Auto Play to enable
the VCR deck to play automatically when you insert a videotape
that is missing the Record Safety Tab.. See page 53.
1
POWER Button
Press the POWER button on the remote control or front panel to
turn on the DVD-VCR.
POWER
OPEN/CLOSE
2
DVD Button
1
2
Insert VHS Tape
1
Insert a standard VHS videotape into the VCR deck.
Press the DVD button on the remote control or front panel when
you want to control the DVD deck.
•
When a videotape is inserted, power will turn on automatically.
•
The DVD indicator will light on the Front Panel Display to show
that the DVD deck is selected.
Play Tape
Press the ❿ll (PLAY/PAUSE) button on the remote control or on
the front panel of the unit. The videotape will begin to play
automatically if it is missing the Record Safety Tab and Auto Play is
turned on. See page 53
3
4
VCR Button
Press the VCR button on the remote control or front panel when
you want to control the VCR deck.
•
The VCR indicator will light on the Front Panel Display to show
that the VHS deck is selected.
3
4
Stop Playback
CHANNEL
DVD/VCR PROGRESSIVE
LINE IN
2
Press the
panel of the unit.
(STOP) button on the remote control or on the front
I
1
2
3
INPUT SEL. Button
4
Press the INPUT SEL. button repeatedly to cycle through all of
your input sources, including the Tuner (Ch##), Line 1 (rear AV
input), and Line 2 (front AV input).
Eject Tape
Press the OPEN/CLOSE button on the remote control or the
EJECT button on the front panel of the unit.
•
Input select is only available when the VCR deck is selected.
5
Additional VCR Options
•
•
•
See pages 52~54 for special VCR Playback features.
See pages 55~57 for VCR Recording features.
See page 58 for Timer Recording features.
Basic DVD Operation
3
2
Fllow the instructions below to playback a DVD.
1
Open the Disc Tray
Press the OPEN/CLOSE button on your remote control or on the
front panel of the unit to turn on the power and open the disc tray.
OPEN/CLOSE
1
1
2
Insert a Disc
Put a disc in the center of the tray, with the label-printed side facing
up.
4
CHANNEL
DVD/VCR PROGRESSIVE
LINE IN
2
3
4
Close the Disc Tray
Press the OPEN/CLOSE button on your remote control or on the
front panel of the unit to close the disc tray.
Play a DVD
Press the PLAY/PAUSE button on your remote control or on the
front panel of the unit.
•
•
Most discs will start to playback as soon as the tray closes.
If a DVD has a MENU, the menu may pop up on TV screen.
4
4
5
Additional DVD Options
•
•
See pages 25 ~ 35 for advanced DVD Setup options.
See pages 36 ~ 51 for special DVD Playback features.
14
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic TV Tuner Operations
Menu Language
To change the on-screen MENU language to English, French or
Spanish, follow these steps.
When watching TV using the DVD-VCR's built-in TV tuner, use the
buttons below.
1
1
TV/VCR
Press this button to switch between your TV's tuner and the VCR's
internal tuner.
3
1
2
Open “MENU”
Press the MENU button while the DVD is in Stop or Play mode.
4
1
•
You don’t need to press the TV/VCR button in vcr mode.
Select “SETUP”
Using the UP/DOWN buttons, move the selection bar to “SETUP”
then press ENTER to select.
2
3
Channel Up/Down
Use these buttons to move to the previous or the next channel.
0-9 Buttons
Use these buttons to select the desired channel directly.
3
4
Select “Language”
Use the UP/DOWN buttons to highlight “Language” then press the
ENTER button.
Language
:
English
4
100+ Button
4
Press this button to tune to channels 100 and above. First, press
the 100+ button, then use the numeric buttons (0-9) to enter the
remaining digits of the channel number desired.
Front Display
:
:
Auto
Off
2
Auto Power Off
Set menu Language
Place the selection bar next to your desired Language, then press
the ENTER button.
•
This button is activated only in Cable TV Mode.
5
INFO. Button
Press this button to display the current channel.
2
•
This also works in DVD and VCR mode.
Language
:
English
Front Display
:
:
Auto
Off
On-Screen Menu Navigation
Auto Power Off
The on-screen menus allow you to enable or disable various
functions on your DVD-VCR. Use the following buttons to open
and navigate through the on-screen menus.
Language
:
English
Front Display
:
:
Auto
Off
1
MENU Button
Auto Power Off
Press this button while the DVD is in Stop or Play mode to open
the on-screen MAIN MENU.
2
Up/Down and Left/Right
Use these buttons to move the selection bar up, down, left and
right to cycle through the menu options.
3
4
ENTER Button
1
2
Press this button to confirm any new settings.
4
RETURN Button
Language
:
English
Press this button to return to the last MENU screen displayed or to
exit the on-screen MENU all together.
2
2
Front Display
:
:
Auto
Off
3
Auto Power Off
2
16
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Clock Set
Tuner Band Setting
If Auto Setup fails to set the DVD-VCR’s internal clock by locating
a local TV station, follow these steps to set the date and time
manually.
This feature allows you to manually set the DVD-VCR’s tuner
band to Antenna or Cable, whichever you connected to the
Antenna In jack during initial setup.
NOTE: For accurate Timer Recording, your DVD-VCR's internal
clock must be set correctly.
• Use this setting only if Auto Setup detected the incorrect tuner
band, i.e. channels are coming in on the wrong channel numbers.
1
1
3
4
1
2
Open “MENU”
1
2
Open “MENU”
With the DVD in Stop or Play mode, press the MENU button.
Press the MENU button while the DVD is in Stop or Play mode.
Select “SETUP”
Using the UP/DOWN buttons, move the selection bar to “SETUP”
Select “SETUP”
Using the UP/DOWN buttons, move the selection bar to “SETUP”
Language
:
English
then press ENTER to select.
then press ENTER to select.
Language
:
English
Front Display
:
:
Auto
Off
3
4
Select “Clock”
Use the UP/DOWN buttons to highlight “Clock ” then press the
ENTER button.
3
4
Select “Channel”
Using the UP/DOWN buttons, move the selection bar to “Channel”,
then press ENTER to select.
Auto Power Off
Front Display
:
:
Auto
Off
Auto Power Off
Select “Manual Clock”
Move the highlight to “Manual Clock”, then press the ENTER
Select “Ant/Cable”
Move the selection arrow to “Ant/Cable” then press right to select
from the following options:
button.
•
The Clock Set/Adjust menu will change as shown.
Language
:
English
•
•
Antenna - Indicates that the DVD-VCR is connected to an indoor
or outdoor VHF/UHF antenna.
Cable TV - Indicates that the DVD-VCR is connected to Cable TV.
5
Set the Clock
Language
:
English
Front Display
:
:
Auto
Off
Use the Left/Right buttons to select each of the following options,
then use the UP/DOWN buttons to set each option:
Auto Power Off
Front Display
:
:
Auto
Off
•
Hour – Set the hour.
Auto Power Off
• Minute – Set the minute.
• Month – Set the month.
• Day
– Set the day.
• Year – Set the year.
Language
:
English
6
Confirm Settings
Press the RETURN button to confirm your clock settings and to
Front Display
:
:
Auto
Off
Auto Power Off
Language
:
English
return to the Setup Menu.
•
Press the RETURN button again to exit.
Front Display
:
:
Auto
Off
Auto Power Off
Antenna
Cable TV
Ant./Cable
:
Antenna
3CH
RF Output CH
:
Auto Channel Memory
Channel Add/Delete
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
RF Output Channel
Auto Channel Memory
Auto Channel Memory will automatically seek and store all active
channels in your area.
1
2
Open “MENU”
With the DVD in Stop or Play mode, press the MENU button.
1
4
1
2
Open “MENU”
With the DVD in Stop or Play mode, press the MENU button.
1
Select “SETUP”
Using the UP/DOWN buttons, move the selection bar to “SETUP”
then press ENTER to select.
5
Select “SETUP”
Using the UP/DOWN buttons, move the selection bar to “SETUP”
then press ENTER to select.
3
4
5
6
Select “Channel”
Using the UP/DOWN buttons, move the selection bar to “Channel,”
then press ENTER to select.
Language
:
English
Front Display
:
:
Auto
Off
3
4
Select “Channel”
Using the UP/DOWN buttons, move the selection bar to “Channel”,
then press ENTER to select.
Language
:
English
Auto Power Off
Select “RF Output CH”
Move the selection bar to “RF Output CH”, then press right
to change.
Front Display
:
:
Auto
Off
Auto Power Off
Run “Auto Channel Memory”
Move the selection arrow to “Auto Channel Memory,” then press
ENTER to select.
Change “RF Output CH”
A message will appear on your TV.
Then press ENTER to change.
Language
:
English
•
•
The DVD-VCR will automatically search for all available
channels in the selected Tuner Band. This procedure may take
a few minutes to complete.
Front Display
:
:
Auto
Off
Change “TV Channel”
Auto Power Off
When finished, the lowest channel found will be displayed.
Language
:
English
A message will appear on your TV. When the message disappears,
change your TV to channel 3 or 4 to match the RF output channel
of the player.
Front Display
:
:
Auto
Off
Auto Power Off
Language
:
English
Front Display
:
:
Auto
Off
Auto Power Off
Language
:
English
Front Display
:
:
Auto
Off
Auto Power Off
Ant./Cable
:
:
Antenna
3CH
RF Output CH
Auto Channel Memory
Channel Add/Delete
Ant./Cable
:
Antenna
4CH
3CH
4CH
RF Output CH
Auto Channel Memory
:
Channel Add/Delete
20
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel Add/Delete
Front Panel Dimmer
You can set the Front Panel Display to be bright all the time, dim
all the time, dim during power off.
Use this feature if Auto Channel Search missed a channel that you
would like to add, or added a channel you wish to remove.
1
2
Open “ MENU”
With the DVD in Stop or Play mode, press the MENU button.
1
1
2
Open “MENU”
With the DVD in Stop or Play mode, press the MENU button.
4
2
Select “SETUP”
Using the UP/DOWN buttons, move the selection bar to “SETUP”
then press ENTER to select.
Select “SETUP”
Using the UP/DOWN buttons, move the selection bar to “SETUP”
then press ENTER to select.
3
Set “Front Display”
Language
:
English
Move the selection bar to “Front Display,” then press right to select
from the following options:
3
Select “Channel”
Using the UP/DOWN buttons, move the selection bar to “Channel”,
then press ENTER to select.
Language
:
English
Front Display
:
:
Auto
Off
Auto Power Off
•
Auto – Front Panel Display will dim automatically during
power off.
Front Display
:
:
Auto
Off
Auto Power Off
•
•
Bright – Front Panel Display will be bright all the time.
Dim – Front Panel Display will be dim all the time.
4
5
Select “Channel Add/Delete”
Move the selection bar to “Channel Add/Delete,” then press
ENTER to select.
Select Channel to add/delete
Language
:
English
Use the CH
/
buttons to tune in the channel number you wish
to add or remove.
Front Display
:
:
Auto
Off
Language
:
English
Auto Power Off
6
Select “Channel Add/Delete”
Front Display
:
:
Auto
Off
Press right to add or press left to remove the channel from
your channel list.
Auto Power Off
•
Repeat steps 4 and 5 to add or remove additional channels.
Language
:
English
Front Display
:
:
Auto
Off
Auto Power Off
Language
:
English
Auto
Bright
Dim
Front Display
:
:
Auto
Off
Auto Power Off
Ant./Cable
:
:
Antenna
3CH
RF Output CH
Auto Channel Memory
Channel Add/Delete
CHANNEL ADD/DELETE
Select channel : [ 02]
and press
press
[
[
❿
➛
]
]
to ADD
to DELETE
❷
CH
RETURN
22
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Power Off
Disc Menu Language
To set the Disc Menu Language to your preferred language, follow
these steps. If your preferred language is available on a DVD, your
Disc Menu Language will automatically be set to the language you
choose.
1
2
Open “MENU”
With the DVD in Stop or Play mode, press the MENU button.
1
Select “SETUP”
Using the UP/DOWN buttons, move the selection bar to “SETUP”
then press ENTER to select.
2
1
2
Open “MENU”
Press the MENU button while the DVD is in Stop mode.
Select “DVD”
3
Set “Auto Power Off”
Move the selection bar to “Auto Power Off”, then press right to
select from following options:
Use the UP/DOWN buttons to highlight “DVD”,
then press the ENTER button.
Language
:
English
•
•
Off – Auto power off is disabled.
1Hr – DVD-VCR will auto shut off 1 hour after the last button is
3
4
5
Select “Language”
Move the selection bar to “Language” then press ENTER to select.
pressed.
Front Display
:
:
Auto
Off
Auto Power Off
Select “Disc Menu”
Highlight “Disc Menu”, then press the ENTER button.
•
2Hr – DVD-VCR will auto shut off 2 hours after the last button is
pressed.
Set “Disc Menu Language” Preference
Highlight your preferred language for disc menus, then press the
ENTER button.
Language
:
English
Front Display
:
:
Auto
Off
Auto Power Off
Audio Language
To set the Audio Language to your preferred language, follow these
steps. If your preferred language is available on a DVD, your Audio
Language will automatically be set to the language you choose.
Language
:
English
Front Display
:
:
Off
Off
Off
1Hr
2Hr
Auto Power Off
1
2
Open “MENU”
Press the MENU button while the DVD is in Stop mode.
Select “DVD”
Use the UP/DOWN buttons to highlight “DVD” then press
the ENTER button.
3
4
5
Select “Language”
Move the selection bar to “Language” then press ENTER to select.
Select “Audio”
Highlight “Audio,” then press the ENTER button.
Set “Audio Language” Preference
Highlight your preferred language for audio soundtracks, then
press the ENTER button.
24
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Subtitle Language
Digital Output
To set the Subtitle Language to your preferred language, follow
these steps. If your preferred language is available on a DVD, your
Subtitle Language will automatically be set to the language you
choose.
If your A/V receiver is equipped with a Dolby Digital decoder, your
DVD-VCR can output Dolby Digital 5.1 sound, but you MUST
enable this feature in the menu system to prevent damage to your
speakers.
Language
:
English
Front Display
:
:
Auto
Off
NOTE: Select “Bitstream” ONLY if you have connected a Dolby
Digital-equipped A/V receiver to the Digital Output
(optical or coaxial) on the DVD-VCR back panel.
Auto Power Off
1
2
Open “MENU”
Press the MENU button while the DVD is in Stop mode.
Select “DVD”
Use the UP/DOWN buttons to highlight “DVD”
then press the ENTER button.
1
2
Open “MENU”
Press the MENU button while the DVD is in Stop mode.
3
4
5
Select “Language”
Move the selection bar to “Language” then press ENTER to select.
Select “DVD”
Use the UP/DOWN buttons to highlight “DVD ”
then press the ENTER button.
Select “Subtitle”
Highlight “Subtitle”, then press the ENTER button.
3
4
Select “Audio”
Highlight “Audio”, then press the ENTER button.
Set “Subtitle Language” Preference
Highlight your preferred language for subtitles, then press the
ENTER button.
Set “Digital Output”
Highlight “Digital Output” then press the RIGHT button to select
one of the following options:
Subtitle Language
Automatic
•
PCM - To use your DVD/TV with an A/V receiver without a
Dolby Digital decoder.
Subtitle
•
Bitstream – To use your DVD/TV with an A/V receiver with a
Dolby Digital decoder.
PCM
Bitstream
PCM Down Sampling
:
On
26
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Dynamic Compression
DTS
If your A/V receiver is equipped with a DTS decoder, your DVD-
VCR can output DTS digital sound, but you MUST enable this
feature in the menu system.
Dynamic Compression restrains the dynamic range of sound, i.e.
the difference between the loud and quiet passages of a DVD audio
track.
Language
:
English
Language
:
English
NOTE: Select “On” ONLY if you have connected a DTS-equipped
A/V receiver to the DIGITAL AUDIO OUT (optical or coaxial) on
the DVD-VCR back panel.
Front Display
:
:
Auto
Off
Front Display
:
:
Auto
Off
1
2
Open “MENU”
Press the MENU button while the DVD is in Stop mode.
Auto Power Off
Auto Power Off
Select “DVD”
Use the UP/DOWN buttons to highlight “DVD ”
then press the ENTER button.
1
2
Open “MENU”
Press the MENU button while the DVD is in Stop mode.
Select “DVD”
Use the UP/DOWN buttons to highlight “DVD ”
3
4
Select “Audio”
Highlight “Audio”, then press the ENTER button.
then press the ENTER button.
Set “Dynamic Compression”
Highlight “Dynamic Compression”, then press the RIGHT button to
select one of the following options:
3
4
Select “Audio ”
Highlight “Audio”, then press the ENTER button.
•
On - This will compress the total dynamic range of the DVD
audio, making quiet passages in the audio signal louder and
loud passages softer.
Set “DTS”
Highlight “DTS” then press the RIGHT button to select one
of the following options:
•
Off – This will preserve the original dynamic range.
•
Off - To use your DVD/TV with an A/V receiver NOT equipped
with a DTS decoder.
• On – To use your DVD/TV with an A/V receiver equipped with a
DTS decoder.
Off
On
Off
On
PCM Down Sampling
:
On
PCM Down Sampling
:
On
28
29
Download from Www.Somanuals.com. All Manuals Search And Download.
PCM Down Sampling
TV Aspect Ratio
If your amplifier is not capable of reproducing a 96kHz signal, PCM
downsampling should be set to on.
Set the aspect ratio (length x width) of your TV screen so the DVD
player will display movies at the appropriate size for your
television. Choose from standard, letterbox, or widescreen format.
Language
:
English
Language
:
English
1
2
Open “MENU”
Press the MENU button while the DVD is in Stop mode.
Front Display
:
:
Auto
Off
1
2
Open “MENU”
Press the MENU button while the DVD is in Stop mode.
Front Display
:
:
Auto
Off
Auto Power Off
Auto Power Off
Select “DVD”
Use the UP/DOWN buttons to highlight “DVD ”
then press the ENTER button.
Select “DVD”
Use the UP/DOWN buttons to highlight “DVD ”
then press the ENTER button.
3
4
Select “Audio”
Highlight “Audio”, then press the ENTER button.
3
4
Select “Display”
Highlight “Display”, then press the ENTER button.
Set “PCM Down Sampling”
Highlight “PCM Down Sampling”, then press the RIGHT button to
select one of the following options:
Set “TV Aspect”
Highlight “TV Aspect” then press the RIGHT button to select one
of the following options:
•
On - When a 96K audio disc is played,
•
•
Widescreen - This method allows you to view the full 16:9
picture on a widescreen television.
96K will be downsampled to 48K and outputted.
Letterbox - This method displays the full width of the widescreen
movie on a standard 4:3 television. As a result, black bars will
appear at the top and bottom of the screen.
•
Off – When a 96K disc is played, 96K will be outputted.
•
Pan-Scan - The familiar way of watching DVD and VHS movies,
this method selectively crops (by panning and scanning to keep
the most important part of the picture visible) wide screen
movies to fit a standard 4:3 television screen.
Display Setup
On
Off
PCM Down Sampling
:
On
30
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Black Level
Alt Video Out
The “Alt Video Out” option must be set in the on-screen menu if
you have connected your DVD-VCR to a TV using the S-VIDEO
OUT or COMPONENT VIDEO OUT jacks.
The Black Level feature adjusts the reference level of black in the
video signal to one of two choices:
• Off - Standard NTSC black level. Yields consistent contrast
through all sources.
Language
:
English
Language
:
English
• Use the S-Video or Component Video connection method only
for the DVD player. The tuner and VCR can still be viewed
through the RF or line outputs.
• On - Enhanced black level, for increased contrast during DVD
playback.
Front Display
:
:
Auto
Off
Front Display
:
:
Auto
Off
Auto Power Off
Auto Power Off
1
Open “MENU”
Press the MENU button while the DVD is in Stop mode.
1
2
Open “MENU”
Press the MENU button while the DVD is in Stop mode.
2
Select “DVD”
Use the UP/DOWN buttons to highlight “DVD ”
then press the ENTER button.
Select “DVD”
Use the UP/DOWN buttons to highlight “DVD,”
then press the ENTER button.
3
4
Select “Display”
Highlight “Display”, then press the ENTER button.
3
4
Select “Display”
Highlight “Display”, then press the ENTER button.
Set “Black Level”
Highlight “Black Level,” then press the RIGHT button to select one
of the following options:
Set “Alt Video Out”
•
•
On - This will enhance the Black Level for increased
brightness/contrast when viewing DVDs.
Off - This is the Standard NTSC reference Black Level for
consistent brightness/contrast across all sources.
Highlight “Alt Video Out,” then press the RIGHT button to select
one of the following options:
• S-Video - Select this if you are using the S-Video OUT jack on
the rear panel to connect to a TV.
• Component - Select this if you are using the COMPONENT
VIDEO OUT jacks on the rear panel to connect to a
Progressive(480p) or Interaced (480i) TV.
• See your TV owner’s manual to determine what type of TV you
have.
- Interlace : Interaced Scan mode will work.
- Progressive : Progressive Scan mode will work, and Video
and S-Video will not work.
Press the Progressive button on the front panel if you have a
Progressive scan TV only. Otherwise, the picture will be
disturbed.
•
Display Setup
On
Display Setup
On
On
Off
32
33
Download from Www.Somanuals.com. All Manuals Search And Download.
A/V Receiver Connections
Parental
Rating Control is a password protected system that allows you to
block playback of DVDs based on their content. The system uses an
eight level rating system.
• If you try to play a DVD that exceeds the selected rating, an error
message will appear.
To take full advantage of the movie theater experience that DVD
offers, you may want to connect your DVD-VCR to a complete
Surround Sound system, including an A/V Receiver and six
Surround Sound speakers.
• Not all discs are rated.
Before You Begin...
1
2
Open “MENU”
Press the MENU button while the DVD is in Stop mode.
•
If your A/V receiver is equipped with a Dolby Digital Decoder,
you have the option to bypass the DVD-VCR’s built-in Dolby
Digital Decoder. Use the DIGITAL AUDIO OUT connection
below.
OR
To Digital Audio Input of an A/V
Receiver with a Dolby Digital
Decoder
Select “DVD”
Use the UP/DOWN buttons to highlight “DVD ”
then press the ENTER button.
1
Digital Audio Out
3
4
Select “Parental”
Highlight “Parental”, then press the ENTER button.
Connect EITHER an optical cable OR a digital coaxial cable from
the DIGITAL AUDIO OUT jacks on the back panel of the DVD-VCR
to their corresponding Digital Audio Input jacks on your A/V
Receiver:
Select “Use Password”
Highlight “Use Password,” then press the RIGHT button to select
one of the following options:
•
•
•
Optical
Coaxial
•
•
Off - No password is necessary to view a DVD or to change the
Rating Level. No additional settings are necessary.
On - A password is necessary to view a DVD and to view the
Rating Level. The menu will change as shown.
Use whichever connection is available on your A/V Receiver.
NOTES:
•
•
•
The first time “Require Password” is set to “Yes,” you will be
prompted to enter a new password.
If the “Enter Password” screen appears, then “Require
Password” has already been set to “Yes.” Please skip to Step 5.
There no Default Password.
5
Enter Password
Use the numeric buttons (0-9) on the remote control to enter the
4-digit password.
•
Write your password down, and keep it in a safe place in case
you need it to change your settings later.
6
7
Select “Rating Level”
Move the selection bar to “Rating Level,” then press ENTER to
select.
Change Rating Level
Use the UP/DOWN buttons to select one of the following ratings:
•
•
•
•
Level 8 Adult
Level 7
Level 6
•
•
•
•
Level 4
Level 3
Level 2
Level 1 Kids Safe
Level 5
All ratings above the level you select will also be blocked, e.g., if
you block Level 6, then Levels 7 and 8 will also be blocked.
Press ENTER to confirm your selection.
• If you forgot your password, press power on from a cold start
with no disc in the unit. Press the REW and F.F buttons
simultaneously on the front panel for 5 seconds. The “reset ok”
message will appear. Press the POWER button and the
DVD-VCR will go to the “Auto Setup” mode. (See page 13)
34
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Special Playback Features
During DVD/CD playback you can select from the following
special playback options. To resume normal playback, press the ❿ll
(Play/Pause) button.
2
1
Still
Press the ❿ll (PLAY/PAUSE) button on the remote control during
playback.
1
• The picture will pause and the audio will mute.
• To resume playback, press the ❿ll (PLAY/PAUSE) button.
• If the player is left in Pause mode for 5 minutes, it will stop
automatically.
2
3
Frame Advance (Step)
While in Still mode, press the F.ADV/SKIP button on the remote
control to advance one frame at a time.
• Audio is muted during Frame Advance mode.
• Press ❿ll (PLAY/PAUSE) to resume normal playback.
NOTE: Frame Advance operates only in the forward direction.
3
3
Skip Forward/Back
While a CD or DVD disc is in Play mode, press the SKIP
FORWARD/BACK (❿❿
/
➛➛ ) buttons on the remote control or front
panel to jump forward and backward through disc chapters/tracks.
•
•
Skip Forward will jump to the next chapter/track.
Skip Back will jump to the beginning of the current chapter/track.
• Press Skip Back again to jump to the beginning of the previous
chapter/track.
Search Forward/Back
While a disc is in Play mode, press and hold the FORWARD/BACK
5
(
❿❿ /➛➛ ) buttons on the remote control or front panel to visually
search forward/backward at 2X - 4X - 8X - 16X - 32X - 128X speed.
Press ❿ll (PLAY/PAUSE) button to resume normal speed.
NOTE: CD search speed - 2X, 4X, 8X
4
Slow Motion
During playback, press the ❿ll (PLAY/PAUSE) button to Still the
image. Press and hold the Search FORWARD (❿❿ ) to play in slow
motion at variable speeds.
•
Press and hold the FORWARD button (❿❿✌ꢀ on the remote and
front panel to increase or decrease the speed from normal
playback to 1/8, 1/4 or 1/2 speed.
•
•
Audio is muted during slow motion playback.
Press the ❿ll (PLAY/PAUSE) button to resume normal
playback.
NOTE: Slow function is not available for CD.
5
Stop/Resume
• Press the Stop button once to stop playback. To resume the
DVD/CD from the point where the disc stopped, press the ❿ll
(PLAY/PAUSE) button.
• Press the
(STOP) button twice to completely stop playback.
I
The next time you press ❿ll (PLAY/PAUSE), the disc will start
over from the beginning.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Menu Navigation
Many DVDs feature their own menu systems, where you can select
Titles, Chapters, Audio Tracks, Subtitles, and special disc features,
such as movie trailers, and information on the cast. Use these
buttons to make selections in the Disc menus.
2
2
2
2
1
2
DISC MENU
Press to access the DVD’s Disc menu, if applicable.
1
Press
,
❷
or
➛
,
❿
to navigate through DVD’s Disc menu
options.
• Press up, down, left and right to highlight menu choices.
3
ENTER Button
Press to make your selections in the Disc menu.
3
EZ View
1
2
Press the EZ VIEW button.
• The screen size changes when the button is pressed repeatedly.
• The screen zoom mode operates differently depending on the
screen setting in the initial setup menu.
• To ensure correct operation of the EZ VIEW button, you should
set the correct aspect ratio in the initial setup .(See the page 31)
1
If you are using a 16:9 TV
- For 16:9 aspect ratio discs
• Wide Screen
Displays the content of the DVD title in 16:9 aspect ratio.
• Screen Fit
The top and bottom of the screen are cut off. When playing a
2.35:1 aspect ratio disc, the black bars at the top and bottom
of the screen will disappear. The picture will look vertically
stretched. (Depending on the type of disc, the black bars may
not disappear completely.)
• Zoom Fit
The top, bottom, left and right of the screen are cut off and
the central portion of the screen is enlarged.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
EZ View
Title/Chapter/Time Selection
To view the current Title, Chapter/Track, and counter position,
press the INFO. button during DVD playback. The Information
screen can also be used to quickly choose a title, chapter/track, or
playing time.
- For 4:3 aspect ratio discs
• Normal Wide
Displays the content of the DVD title in 16:9 aspect ratio.
The picture will look horizontally stretched.
1
• Screen Fit
1
2
View the Display
The top and bottom of the screen are cut off and the full screen appears. The picture will
look vertically stretched.
During DVD/CD playback, press the INFO. button on the
remote control.
4
• Zoom Fit
Select title
The top, bottom, left and right of the screen are cut off and the central portion of the screen
is enlarged.
Use the UP/DOWN and LEFT/RIGHT buttons to select Title, then
press the ENTER button to change among all available titles on the
disc.
• Vertical Fit
• The “TITLE”
followed by t
seconds.
When a 4:3 DVD is viewed on a 16:9 TV, black bars will appear at the left and right of the
screen in order to prevent the picture from looking horizontally stretched.
3
4
Select Chapter or Track
Use the UP/DOWN and LEFT/RIGHT buttons to select Chapter or
Track, then press the ENTER button to change among all
available Chapters/Tracks on the disc.
•
The “CHAP
followed by
seconds.
3
If you are using a 4:3 TV
- For 16:9 aspect ratio discs
Select Counter Position
•
4:3 Letter Box
Use the UP/DOWN and LEFT/RIGHT buttons to select the counter
position indicator, then use the numeric buttons (0-9) to enter the
desired counter position in the format H:MM:SS (H = Hours, M =
Minutes, S = Seconds).
Then press the ENTER button to enter the desired counter
position.
Displays the content of the DVD title in 16:9 aspect ratio.
The black bars will appear at the top and bottom of the screen.
•
•
4:3 Pan Scan
The left and right of the screen are cut off and displays the central portion of the 16:9 screen.
Screen Fit
The top and bottom of the screen are cut off and the full screen appears. The picture will look
vertically stretched.
➢
To make the screen disappear, press the INFO button again.
•
Zoom Fit
When a 4:3 DVD is viewed on a 16:9 TV, black bars will appear at the left and right of the
screen in order to prevent the picture from looking horizontally stretched.
To access the desired title when there is more than one in
the disc. For example, if there is more than one movie on a
DVD, each movie will be identified.
- For 4:3 aspect ratio discs
Title
•
Normal Screen
Displays the content of the DVD title in 4:3 aspect ratio.
Most DVD discs are recorded in chapters so that you can
quickly find a specific passage.
Chapter
Time
•
Screen Fit
The top and bottom of the screen are cut off and the full screen appears. The picture would
look vertically stretched.
Allows playback of the film from a desired time.
You must enter the starting time as a reference.
•
Zoom Fit
Refers to the language of the film soundtrack. In the
example, the soundtrack is played in English 5.1CH. A DVD
disc can have up to eight different soundtracks.
The top, bottom, left and right of the screen are cut off and the central portion of the screen is
enlarged.
Audio
Refers to the subtitle languages available in the disc.
You will be able to choose the subtitles language or, if you
prefer, turn them off from the screen. A DVD disc can have
up to 32 different subtitles.
Subtitle
3D Sound
➢
This function may behave differently depending on the type of disc.
A surround sound effect is generated using only two front
speakers.
38
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Subtitle
Angle View
Some DVD Movies provide you with various camera
angle views on the same scene while they are playing.
To activate the feature press the ANGLE Button.
Some DVDs provide subtitles in one or more languages. You can
use the SUBTITLE button to quickly view and change settings.
1
1
2
Open Subtitle Menu
During playback, press the SUBTITLE button.
1
2
3
Check for the Angle Icon
Press the Angle button, you’ll see the Angle Icon when watching a
DVD with multi Angles available.
1
3
Set Subtitle Language
Use the LEFT/RIGHT buttons to select from the available subtitle
languages.
View Angle Menu Options
When the Angle Icon comes up on the screen press the ANGLE
button to see the Angle menu.
•
Subtitle languages are represented by abbreviations.
ENG
On
3
Activate Subtitles
Use the UP/DOWN buttons to turn On or Off subtitles.
Select an Angle option
Press the LEFT/RIGHT buttons to select a camera angle you wish
to see.
•
•
The default is "On".
Press the ENTER button to confirm your selection.
Digest Pla
ENG
Off
1
DIGEST But
During playba
•
You’ll see t
chapters o
When each
chapter wil
•
2
Set DIGEST
Press the up/d
button to sele
• Up to 9 wind
time. Press
9.
➢
➢ You
desir
➢ ‘DIG
use.
40
41
Download from Www.Somanuals.com. All Manuals Search And Download.
A to B Repeat
Repeat Chapter/Title
A to B Repeat feature enables you to repeat the designated section
on a DVD or CD. To activate, mark where to start(A) and where to
end(B) of the section you want to watch.
You can repeat a single chapter or a complete title.
5
1
2
Open Repeat Menu
Press the REPEAT button while in Play mode to open the Repeat
menu.
1
Select A-B Repeat Function
Press the REPEAT button while in Play mode, then use the
Left/Right buttons to select A-B Repeat.
4
1
•
The current Repeat mode will be highlighted.
1
•
When you select A-B Repeat, “A-” will be highlighted.
Select “Chapter”
DVD
NOTE: The menu will display “Track” in place of “Chapter” if you
Use the LEFT/RIGHT buttons to select “Chapter”.
are playing a CD.
Chapter Title A - B
Off
•
When you select Chapter Repeat, “Chapter” will be highlighted.
DVD
2
Mark the Starting Point
Press the ENTER button at the beginning of the segment you want
to repeat (Point A).
3
4
Repeat Chapter
Chapter Title A - B
Off
Press the ENTER button to repeat the current chapter or track.
•
Once you select Point “A”, “B” will be highlighted.
Select “Title”
NOTE: The minimum A-B Repeat time is 5 seconds.
Use the LEFT/RIGHT buttons to select “Title”.
CD
•
When you select Title Repeat, “Title” will be highlighted.
3
4
Mark the Ending Point
5
Repeat Title
Track Disc A - B
Press the ENTER button again at the end of the segment you want
to repeat (Point B).
Off
Press the ENTER button to repeat the title.
CD
•
The segment will begin repeating in a continuous loop.
Track Disc A - B
Off
Cancel A-B Repeat
Press the REPEAT button to open the Repeat Menu, use the
Left/Right buttons to highlight “Off,” then press the ENTER button.
Audio
DVD
Multiple language/audio setup options, such as Dolby Digital 5.1,
Dolby Pro Logic, or LPCM 2 Channel audio, are available on some
DVDs. You can use the AUDIO button to quickly view and select
the options available on a disc.
ENG DOLBY DIGITAL 5.1CH
1
2
Open the Audio Menu
During playback, press the AUDIO button on the remote control.
Select DVD Audio Track
CD
Use the LEFT/RIGHT buttons to select the desired language/audio
setup on the DVD.
Stereo
• Languages are represented by abbreviations, e.g. “ENG” for
“English.”
42
43
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3/WMA Play
Bookmarks
When an MP3/WMA Disc is inserted into the DVD player, the first song file of
the first folder plays.
Up to three Bookmarks can be inserted for a given DVD, allowing
you to quickly jump to your favorite scene or song.
•
•
•
If more than two file extensions are present, select the media of your
choice.
1
Open Bookmark Menu
During playback, press the MARK button on the remote control.
The “MARK” header will be displayed on the screen.
To change the currently playing media, press the STOP (
twice and then press the DISC MENU button.
) button
➢
3
If no button on the remote controller is pressed for 60 seconds, the menu
will disappear and the selected item will be played.
1
2
Select Bookmark Placeholder
Use the LEFT/RIGHT buttons to move to one of the three bookmark
placeholders (- - -).
MP3/WMA Play Function
•
The selected placeholder will be highlighted.
When the first song file is playing, the music folder menu will
appear on the right side of the screen.
Up to 8 music folders can be displayed at a time. If you have more
than 8 folders on a disc, press the LEFT/RIGHT buttons to bring
them up on the screen.
1.
2.
=
– –
3
4
Set the Bookmark
Keep on playing the DVD up to the scene you want to bookmark,
then press the ENTER button. The placeholder (-) will change to a
number (1, 2 or 3).
•
•
•
Use the UP/DOWN buttons to select the desired music folder, then
press ENTER. Use the UP/DOWN buttons again to select a song
file. Press ENTER to begin playback of the song file.
You may continue to set up to three bookmarks.
Press the MARK button when complete.
Depending on the disc, the bookmark function may not work.
RETURN
Program/Random playback
Play Bookmark
CLEAR
1
– –
• During playback, press the MARK button on the remote control.
• Use the LEFT/RIGHT buttons to move to a previously set
bookmark.
PROGRAM
RANDOM
With the MP3 in Stop mode, press the MODE button to switch
1.
between the RANDOM and PROGRAM modes. See page 47 for
more information on these modes.
•
•
•
Press the PLAY/PAUSE button to play the bookmark.
Press the CLEAR button to cancel the bookmark.
Press the MARK button again to exit the Bookmark menu.
➢
•
Press the REPEAT button to hear only music continuously and
press it once again to release.
RETURN
• PROGRAM/RANDOM playback cannot be used if the disc
contains more than two types of file extensions.
44
45
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3/WMA Play
Program Play & Random Play
CD-R MP3/WMA discs
Program Play (CD/MP3/WMA)
PROGRAM
RANDOM
When playing CD-R/MP3 or WMA discs, please follow all the recommendations for CD-R above,
plus the comments below:
1.
2.
With the MP3 in Stop mode, press the MODE button.
• Your MP3 or WMA files should be ISO 9660 or JOLIET format.
ISO 9660 format and Joliet MP3 or WMA files are compatible with Microsoft's DOS and Windows,
and with Apple's Mac. These two formats are the most widely used.
Use the LEFT/RIGHT buttons to select PROGRAM.
Press the ENTER button.
RETURN
• When naming your MP3 or WMA files do not exceed 8 characters, and place ".mp3, .wma"
as the file extension.
3.
4.
Use the LEFT/ RIGHT/ UP/ DOWN buttons to select the first track
to add to the program.
Press the ENTER button. The selection numbers appear in the
Program Order box.
General name format of: Title.mp3. or Title.wma. When composing your title, make sure that you
use 8 characters or less, have no spaces in the name, and avoid the use of special characters
including: (.,/,\,=,+).
PROGRRAM 01
Track
Program order
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
01 02 03 04
05 06 07 08
09 10 11 12
13 14 15 16
• Use a decompression transfer rate of at least 128 Kbps when recording MP3 files.
Sound quality with MP3 files basically depends on the rate of compression/decompression you
choose. Getting audio CD quality sound requires an analog/digital sampling rate, that is
conversion to MP3 format, of at least 128 Kbps and up to 160 Kbps. However, choosing higher
rates, like 192 Kbps or more, only rarely give better sound quality.
Press the PLAY/PAUSE (❿ꢀll) button.
The disc will be played in programmed order
.
RETURN
CLEAR
Conversely, files with decompression rates below 128 Kbps will not be played properly.
• Use a decompression transfer rate of at least 64Kbps when recording WMA files.
Sound quality with WMA files basically depends on the rate of compression/decompression you
choose. Getting audio CD quality sound requires an analog/digital sampling rate, that is
conversion to WMA format, of at least 64Kbps and up to 192Kbps.
Conversely, files with decompression rates below 64Kbps or over 192Kbps will not be played
properly.
PROGRAM
RANDOM
Random Play (CD/MP3/WMA)
• Do not try recording copyright protected MP3 files.
Certain "securized" files are encrypted and code protected to prevent illegal copying. These files
are of the following types: Windows MediaTM (registered trade mark of Microsoft Inc) and SDMITM
(registered trade mark of The SDMI Foundation). You cannot copy such files.
1.
2.
With the MP3 in Stop mode, press the MODE button.
Use the LEFT/ RIGHT buttons to select RANDOM.
Press the ENTER button.
The disc will be played in random order.
• Important: The above recommendations cannot be taken as a guarantee that the DVD player will
play MP3 recordings, or as an assurance of sound quality.
You should note that certain technologies and methods for MP3 file recording on CD-Rs prevent
optimal playback of these files on your DVD player (degraded sound quality and in some cases,
inability of the player to read the files).
RETURN
• This unit can play a maximum of 500 files and 300 folders per disc.
➢
• Depending on the disc, the Program and Random Play
functions may not work.
• To resume normal play, press the CLEAR button.
• PROGRAM/RANDOM playback cannot be used if the disc
contains more than two types of file extensions.
• This unit can support a maximum of 99 programmed order.
46
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture CD Playback
Picture CD Playback
•
•
Select JPEG in the menu to view a Photo CD.
To change the currently playing media, press the STOP ( ) button
➢
twice and then press the DISC MENU button.
CD-R JPEG Discs
•
If no button on the remote controller is pressed for 60 seconds, the
menu will disappear and the selected item will be played.
• Only files with the ".jpg" and ".JPG" extensions can be played.
• If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
• The name of the JPEG file may not be longer than 8 characters and should contain no blank spaces or
special characters (. / = +).
• Only a consecutively written multisession disc can be played. If there is a blank segment in the
multisession disc, the disc can be played only up to the blank segment.
• A maximum of 500 images can be stored on a single CD.
1.
Open the disc tray.
2.
3.
Load the disc on the tray.
- Load the disc with the labeled side up.
Close the tray.
- The tray closes and you should get a screen that looks like the
one below.
• Only Kodak Picture CDs can be played.
• When playing a Kodak Picture CD, only the JPEG files in the pictures folder can be played.
• Picture discs other than Kodak Picture CD may take longer to start playing or may not play at all.
• If a number of files in 1 Disc is over 500, only 500 JPEG file can be played.
• If a number of folders in 1 Disc is over 300, only JPEG files in 300 folders can be played.
ALBUM
PHOTO: 1 /215
• Use the Up/Down or Left/Right buttons on the remote controller to select
the picture you want to view and then press the ENTER button. (Press
the PLAY/PAUSE ( ❿ꢀll ) button if you want to play it in the Slide Show
mode.)
ꢀ
button.
• To see the next 6 pictures, press the
• To see the previous 6 pictures, press the
ꢀ
button.
•
•
: Return to the Album Screen.
PHOTO: 1 /215
: Each time the ENTER button is pressed, the picture rotates 90
degrees clockwise.
RETURN
•
: Each time the ENTER button is pressed, the picture is enlarged
up to 4X. (Normal ➢ 2X ➢ 4X ➢ 2X ➢ Normal)
•
: The unit enters slide show mode.
*Press the RETURN button to return to the album screen.
*Before the Slide Show can begin, the picture interval must be set.
•
•
•
: When this icon is selected and ENTER is pressed, the pictures
change automatically with about an 6 second interval.
RETURN
TIMER:
: The pictures change automatically with about an 12 second
interval.
: The pictures change automatically with about an
18 second interval.
*Depending on the file size, each interval between images may take
longer or shorter than the manual suggests
.
➢
• Press the RETURN button to return to the album screen.
• Press the RETURN button to return to the slide show.
• If no buttons on the remote controller pressed for 10 seconds, the menu will disappear.
Press the Up/Down or Left/Right buttons on the remote controller to display the menu again.
48
49
Download from Www.Somanuals.com. All Manuals Search And Download.
3D Sound
Function (DVD)
The 3D Sound function is a sound enhancement mode that lets you
enjoy virtual surround sound with only two speakers.
Use this feature to check your DVD.
Language
:
English
1
2
Open “MENU”
With the DVD in Play mode, press the MENU button.
1
2
3
Press the “INFO.” button
Front Display
:
:
Auto
Off
During playback, press the “INFO.” button on the remote control.
Auto Power Off
Select “FUNCTION”
Use the UP/DOWN buttons to highlight “FUNCTION” then press
the ENTER button.
Set 3D Sound
Use the UP/DOWN buttons to select “3D Sound” item.
3
4
Select “DVD Function”
Using the UP/DOWN buttons to highlight “DVD Function” then
press ENTER to select.
Use the LEFT/RIGHT buttons to confirm your selection.
-ON : A surround sound effect is generated using only two front
speakers.
-Off : This function will not work.
Select “Title Menu”
Highlight “Title Menu”, then press the ENTER button.
- Disc Menu
4
To make the screen disappear, press the “INFO.” button again.
Highlight “ Disc Menu”, then press the ENTER button.
- Information
Highlight “Information”, then press the ENTER button.
- Zoom
Highlight “Zoom”, then press the ENTER button.
- Bookmark
Highlight “Bookmark”, then press the ENTER button.
- Repeat
Highlight “Repeat”, then press the ENTER button.
- EZ View
DVD Function
Title Menu
Disc Menu
Information
Zoom
Bookmark
Repeat
Highlight “EZ View”, then press the ENTER button.
EZ View
50
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Special VCR Playback Features
Auto Play
While a videotape is playing, you can enjoy a variety of special
playback features, including Still, Frame Advance, Skip, Repeat, and
more. Press the Play button again to resume normal playback.
If you want your videotapes to play automatically when you insert
them, turn on Auto Play.
NOTE: Only tapes that are missing the Record Safety Tab will
play automatically when inserted.
PLAY
1
2
3
Still
From Play mode, press Play/Pause to still a single frame.
1
2
Open the “MENU”
With the DVD in Stop or Play mode, press the MENU button.
Frame Advance
From still mode, press F.ADV/SKIP to advance to the next frame.
0:00:00 SP
Select “VCR”
Using the Up/Down buttons, move the selection bar to
“VCR” then press ENTER to select.
Press the INFO. button to see the
current status of the VCR deck, as well
as the tape counter position and
record speed.
T120
T160
T180
Cue/Review
From Play mode, press F.Forward (❿❿) or Rewind (➛➛) to
cue/review at two speeds:
n
•
Picture Search — Press and release to advance the tape
forward or backward at 5 times normal speed.
Jet Search — Press and hold to advance the tape forward or
backward at 7 times normal speed.
3
Select “Tape Length”
Press the RIGHT button to select the video cassette length.
This information is usually printed on the tape box. The menu
cycles through: T120, T160 or T180. Once the type of cassette is
set, the VCR can display the amount of time remaining on the tape
when you press the INFO. button.
•
4
5
Skip
3
3
From Play mode, press F.ADV/SKIP to cue ahead exactly 30
seconds. Press Skip repeatedly up to 4 times to cue ahead 2
minutes.
4
Select “Auto Play”
Move the selection bar to “Auto Play,” then press right to select
from the following options:
On
Off
n
Repeat
•
On - The VCR will automatically begin playing a video tape
when it is inserted, as long as the safety tab of the cassette has
been removed.
•
From Play mode, press Repeat to review the last 5 seconds of
tape (SP mode).
•
From Play mode, press Repeat to review the last 15 seconds of
tape (SLP mode).
•
Off - Auto play is disabled.
5
Select “Auto Repeat”
6
Shuttle
Move the selection bar to “ Auto Repeat” sets the VCR to
play a tape repeatedly [unless a tape control is activated (stop, fast
forward or rewind)].
From Play mode, Shuttle >> gradually increases the cue speed
from Double-Speed playback to Picture Search to Jet Search.
Shuttle << gradually slows down the tape, then goes into Slow
mode, Still mode, Reverse Picture Search and Reverse Jet Search.
n
Off
On
Tracking
The Tracking adjustment removes the white lines that sometimes
appear during playback because of slight differences in recording
decks. The TRK button will automatically align the recorded tracks
with the playback heads to solve this problem. You may also set
tracking manually.
S-VHS Playback
1
The DVD-VCR allows you to playback high quality S-VHS tapes.
1
2
Insert a S-VHS Tape
1
Adjust Tracking Manually
During playback, press the CH/TRK
remove white lines from the picture.
Insert an S-VHS tape into the VCR deck.
or CH/TRK
buttons to
1
Start Playback
Press Play/Pause on the remote control to begin playback of the S-VHS tape.
52
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Recording
Variable Search System
Press the SEARCH button to display the search screen in the stop
mode. When a program is recorded, the starting point is given an
Index mark for easy location. However, the VHS Index Search
System (VISS) cannot recognize index marks made by old VCRs. If
the VCR has trouble finding a mark, it is probably because the
cassette was recorded on a VCR without VISS. If you want to index
two programs in a row, set your VCR to stop, then start recording
each program. Pause has no effect on index marks.
You can record a TV show in progress by inserting a blank tape and
pressing the REC button. You can even add time in 30-minute
increments up to 4 hours by pressing the REC button repeatedly;
see page 57.
Forward
Reverse
NOTE: Be sure your videotape has a Record Safety Tab. If the tab
is missing, you can cover the opening with a small piece of
tape. Warning: Do not cover this opening unless you are
sure you want to record over the tape.
1
Go to 0:00:00 stop
Before You Begin...
Use this feature when you want to search for the 0:00:00 counter
position on a cassette. Press the CLEAR button at the point on the
tape where you want to set the counter to 0:00:00. While a
cassette is stopped, press the ENTER button. The VCR will rewind
or fast forward, searching for the 0:00:00 counter position, and then
automatically stop at that position.
• Power on the DVD-VCR
• Power on the TV
• Set the TV to channel 3 or 4 .
1
2
Insert Tape
Insert a blank VHS tape into the VCR deck.
• Make sure the tape is long enough to record the entire program.
To change the Recording Speed, see page 57.
2
2
End search
Use this feature when you want to search for a blank position to
record a program on a cassette. While a cassette is stopped, press
ENTER button. The VCR will fast forward, searching for a blank
position, and then automatically stop at that position. If the VCR
reaches the end of the tape during end search, the tape will be
ejected.
Select a Channel to Record
Use the 0–9 buttons or the Channel Up/Down arrow buttons to
select the desired channel, or press the INPUT SEL. button to
select Line 1 or 2 if recording from an external device connected to
the front or rear Line inputs, respectively.
3
Scan and play
Use scan and play when you don’t know exactly where a program
is located on a cassette tape.
3
Start Recording
3
Press the REC button on the remote control or front panel.
For options while recording is in progress, see “Special Recording
Features” on the next page.
- Forward Intro Scan
Highlight “Forward Intro Scan”, then press the ENTER button.
- Reverse Intro Scan
1
➢
Recording from the DVD player to the VCR is not
possible.
Highlight “Reverse Intro Scan”, then press the ENTER button.
CHANNEL
DVD/VCR PROGRESSIVE
LINE IN
2
3
54
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Special Recording Features
One-Touch Recording (OTR)
While a recording is in progress, you can watch a different channel,
watch a DVD, or add recording time in 30-minute increments.
One-Touch Recording (OTR) allows you to add recording time in
30-minute increments up to 4 hours at the touch of a button.
1
RECORD
1
Pause/Resume Recording
Press the ❿ll (PLAY/PAUSE) button.
Press REC again to resume.
1
2
Start Recording
Follow the instructions on page 55 to begin recording.
2
Activate OTR
While in Record mode, press the REC button again to activate
One-Touch Recording (OTR).
2
3
Stop Recording
Press the STOP button.
Watch a Different Channel
Press the TV/VCR button on the remote to switch to your TV tuner,
then select a different channel on your television.
• Record length 0:30 appears on the On-Screen Display and the
DVD-VCR will record for exactly 30 minutes.
3
0:30
1:00
1:30
2:00
3:00
4:00
3
Add Recording Time
Record length 0:30 07
4
5
To Watch a DVD
Insert a DVD in the DVD deck and press Play. The output will
automatically change to the DVD.
Continue pressing REC to add recording time in 30 minute
increments up to 4 hours.
• The DVD-VCR stops recording automatically when the time has
elapsed. And DVD-VCR will be Automatically turned off when
the OTR finished.
Add Recording Time
SP
See One-Touch Recording (OTR) on the next page.
4
Record Speed
POWER
You can slow down the recording speed from SP to SLP in order to fit
six hours of programming on a T-120 tape.
1
2
Start Recording
Follow the Basic Recording instructions on page 55.
2
Set Record Speed
Press the SPEED button on the remote control to set the Record
Speed to one of the following options:
•
SP – Standard Play, for best quality.
• SLP – Super Long Play, for maximum recording time (3 times SP).
NOTE: The selected Record Speed will appear on the front panel
display and on-screen display.
Maximum Recording Time - SP vs. SLP
Tape Length
T-120
SP (Standard Play)
2 hrs
SLP (Super Long Play)
6 hrs
8 hrs
9 hrs
T-160
2hrs 40 mins
3 hrs
T-180
56
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Function (VCR)
How to Set a Timer Recording
Insert a blank videotape into the VCR deck. Be sure to leave the
Record Safety Tab intact.
1
Open “MENU”
With the DVD in Stop or Play mode, press the MENU button.
With the Timer Recording function, you can program up to 7
events at a time to record up to a month in advance.
Set the TV to channel 3 or 4.
Language
:
English
Language
:
English
Front Display
:
:
Auto
Off
Front Display
:
:
Auto
Off
2
3
4
Select “FUNCTION”
Use the Up/Down buttons to highlight “FUNCTION” then press the
ENTER button.
Auto Power Off
Auto Power Off
To Begin Setting the Timer Recording,
• Turn on your DVD-VCR, and
• Turn on your TV.
Select “VCR Function”
Using the UP/DOWN buttons to highlight “VCR Function” then
press ENTER to select.
1
Open “MENU”
Press the MENU button or the TIMER button while the DVD is in
Stop or Play mode.
Timer Program
Select “Go to ( 0: 00: 00)”
If you want to set
the timer program,
Highlight “Go to (0:00:00)”, then press the ENTER button.
2
3
Select “Program”
Use the UP/DOWN buttons to highlight “PROGRAM”
then press the ENTER button.
press the ENTER key
- End Search
Highlight “End Search”, then press the ENTER button.
- Forward Intro Scan
Highlight “Forward Intro Scan”, then press the ENTER button.
- Reverse Intro Scan
Select Channel Number
Use the Right and UP/DOWN buttons to set the channel.
Press the RIGHT button to move to the next setting.
Highlight “Reverse Intro Scan”, then press the ENTER button.
4
5
Set “Time/Date/Speed”
No
Ch
Start
End
Date
Speed
Repeat Step 3 above to set start time, end time, date and record
speed. Date can be set for one time, daily or weekly recording.
See below.
1
2
3
4
5
6
7
:
:
:
:
:
:
:
:
:
:
:
:
:
:
Forward
Reverse
Save “Timer Recording”
Press the RETURN button to finish setting the timer recording.
Stop the VCR or turn the power off. The timer indicator light will
come on the VCR. Then the VCR will automatically turn on and
begin recording at the time you set. To stop the timer recording,
press the POWER button or press the STOP button two times.
6
7
Auto Speed Select
If the length of the videotape is not long enough for a timer
recording in the SP mode, set the recording tape speed to “AUTO”.
Recording will start in the SP mode. If the length is not long
enough, the tape speed will automatically change from SP mode to
SLP mode.
Daily/Weekly Date Programming
Weekly [SUN’S~SAT’S]: Use this to record TV programs on the
same channel at the same time every week.
Daily [MO - FR] : Use this to record TV programs on the same
channel at the same time every day Monday through Friday.
58
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Stereo Connections
S-Video/Component Video Connections (for DVD)
You can connect your DVD-VCR to your home stereo system or
stereo TV and enjoy stereo sound when watching a movie or TV.
Use the S-Video or Component Video connection method only for
the DVD player. The tuner and VCR can still be viewed through the
RF or line inputs.
To activate your alternative (S-Video or Component) video
selection, follow the “Alt Video Out” instructions on page 33.
Keep in mind that you can choose either S-Video or Component
only, but not both.
A superior video quality can be obtained when watching a DVD on
your DVD-VCR if your TV is equipped with S-Video or Component
Video inputs.
1
Connect DVD-VCR to Stereo
Using RCA cables, connect the Line Out Left and Right Audio jacks
on the back panel of the DVD-VCR to the Auxiliary Inputs on your
stereo receiver. Connect the Video Output also in case you are
using a stereo TV.
1
To S-Video Input on Your TV
2
3
Set Stereo to Auxiliary Mode
1
Connect S-VIDEO OUT to TV
Set your stereo receiver or TV to either “Aux” or “Tape” regardless
of which line input you are using for your particular device.
Using an S-Video cable, connect the S-VIDEO OUT on the back
panel of your DVD-VCR to the S-Video Input on your TV.
2
Play a Tape
2
Connect Component Video Out to TV
Insert a DVD or Hi-Fi stereo videotape into your system. Be sure to
adjust the volume on your stereo receiver or TV. Audio will be heard
through your stereo speakers.
To Component Video Input
on Your TV
Using a component video cable, connect the COMPONENT
VIDEO OUT (Y, Pb, Pr) on the back panel of your DVD-VCR to the
Component Video Input on your TV.
•
If there is no stereo sound even after you have inserted a Hi-Fi
stereo videotape, press the Audio button until “Hi-Fi” appears
on the on-screen display.
3
Connect Audio Out (DVD only)
3
Using RCA audio cables, connect the Left/Right Line Out jacks on
the back panel of your DVD/VCR to the Left/Right Audio Line In
jacks on your TV.
To Left/Right Audio Inputs
on Your TV
•
When connecting your DVD-VCR to a TV with the S-Video or
Component Video Output, make sure that you use these Line
Out jacks.
• To activate your connection, see “Alt Video Out” on page 33.
60
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Monitor TV Connections
Connecting Other Video Equipment
Monitor-style televisions offer improved sound and picture over
regular televisions because they receive the audio and video signals
directly from the DVD-VCR through the line inputs.
You can connect a wide variety of audio/video equipment to your
DVD-VCR, including:
• An additional VCR
• Laser Disc Player
• DVD Player
• Camcorder
NOTE: A monitor television is not the same as a computer
monitor.
• Satellite Receiver
• Video Game
1
Connect VCR to Monitor TV
Since all of these devices use essentially the same connections, they
will be described together.
To Monitor TV Audio/Video Inputs
Connect RCA cables from the Audio/Video Line Out jacks on the
back panel of the DVD-VCR to the Audio/Video Line Inputs of your
monitor TV.
TV Audio/Video Outputs of
External Device
1
2
3
Connect Device to DVD-VCR
Connect RCA cables from the Audio and Video Line Outputs of
your external device to the Audio and Video Line Inputs on the
front or back panel of the DVD-VCR.
2
3
Set TV to Auxiliary Mode
Set your monitor TV to “Aux,” “Video,” or “Line.” Refer to your
monitor television owner’s manual for the correct setting.
Watch Device
Connection is Complete
NOTE: With this connection, the TV/VCR button has no effect. It is
as if the TV/VCR button were always set to VCR.
Play your external device, then press the INPUT SEL. button until
the playback from LINE1 (rear panel inputs) or LINE2 (front panel
inputs) appears on your TV screen.
2,3
Record Device
First, play your external device. Next, press the INPUT SEL. button
until the playback from LINE1 (rear panel inputs) or LINE2 (front
panel inputs) appears on your TV screen. Then press Record on
the VCR deck.
3
3
4
Timer Record From Device
Select LINE1 (L1) or LINE2 (L2) as your record source in the Timer
Record menu. All other Timer Record settings should be set in the
usual manner.
62
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Specifications
ELECTRONICS
AUDIO
2 Stereo audio inputs, RCA Connector, -8dbm, 47KΩ,
front and rear
Samsung Limited Warranty
Inputs
VIDEO
2 Composite video inputs, RCA Connector, 75Ω, 1Vp-p
Antenna or CATV Input, F-Connector, 75Ω
Samsung Electronics Canada Inc. (SECA), warrants that this product is
free from defective material and workmanship.
RF
AUDIO
1 Stereo audio outputs, RCA Connector, -8dbm, 1.5KΩ
AUDIO (DVD only)
2 Digital audio outputs (1 optical, 1 coaxial)
1 Stereo audio outputs
SECA further warrants that if this product fails to operate properly within the
specified warranty period and the failure is due to improper workmanship or
defective material SECA will repair or replace the product at its option.
VIDEO
1 Composite video output, RCA Connector, 75Ω, 1Vp-p
Outputs
VIDEO (DVD only)
1 S-Video output, S-Connector, 75Ω, Y=1.0Vp-p,
C=0.286Vp-p
All warranty repairs must be performed by a SECA authorized service
centre. (The name and address of the location nearest you can be obtained
by calling toll free 1-800-268-1620 or visiting our web site at
1 Component video output, 75Ω, Y=1.0Vp-p, Pb=0.7Vp-p,
Pr=0.7Vp-p
RF
Channel 3 or 4
VIDEO SYSTEM
1/2-inch VHS system, 4 rotary head helical scanning;
FM azimuth luminance;chrominance: converted sub system
phase shift
Labour
Parts
one (1) year (carry-in)
one (1) year
AUDIO TRACK
Normal: 1 track; Hi-Fi: 2 track
PLAY/RECORD TIME
FF/REW TIME
HEADS
T-180 tape: SP 3 hours, SLP 9 hours
T-120 tape: <2 minutes
On carry-in models, transportation to and from the service centre is the
customer’s responsibility.
VCR
Video: DA 4 rotary
Audio: 2 rotary heads (Hi-Fi); 1 stationary head (Linear)
Control:1 stationary head
The original dated sales receipt must be retained by the customer and is the
only acceptable proof of purchase. It must be presented to the authorized
service centre at the time service is requested.
Erase: 1 full track, 1 audio track
Less than 0.005% (Hi-Fi)
WOW & FLUTTER
FREQ. RESPONSE
DISC COMPATIBILITY
Exclusions
20-20,000 Hz (Hi-Fi)
CD, CD-R, CD-R/W
DVD-Video, CD-Digital Audio (5” and 3.5”),
MP3 files on CD-ROM
This warranty does not cover damage due to accident, fire flood and/or
other acts of God; misuse, incorrect line voltage, improper installation,
improper or unauthorized repairs, commercial use, or damage that occurs in
shipping. Exterior and interior finish, lamps and glass are not covered under
this warranty. Customer adjustments which are explained in the instruction
manual are not covered under the terms of this warranty. This warranty will
automatically be voided for any unit found with a missing or altered serial
number. This warranty is valid only on products purchased and used in
Canada.
DVD
FREQ. RESPONSE
S/N RATIO
96/48 kHz Sampling: 4 Hz-22kHz
110 dB
DYNAMIC RANGE
THD
96 dB
0.003 %
POWER REQUIREMENT
ENVIRONMENT
WEIGHT
120V AC, 60 Hz, 25 watts
41-104 F (5-40 C); 10%-75% humidity
13.8 lbs.
SYSTEM
64
65
Download from Www.Somanuals.com. All Manuals Search And Download.
SAMSUNG ELECTRONICS CANADA, INC.
HEADQUARTERS
SAMSUNG ELECTRONICS CANADA, INC.
7037 FINANCIAL DRIVE MISSISSAUGA, ONTARIO L5N 6R3 CANADA
MADE IN KOREA
TEL: 1-905-542-3535
CUSTOMER SERVICE
7037 Financial Drive Mississauga, Ontario L5N 6R3 Canada
1-800-SAMSUNG (1-800-726-7864)
ELECTRONICS
AK68-00164A
Download from Www.Somanuals.com. All Manuals Search And Download.
|