Samsung DVD Player DVD HR720 User Guide

Instruction Manual

DVD-HR720

TV Guide On Screen User’s Manual

is attached as an appendix.

English

www.samsung.com

AK68-00758B-01

Download from Www.Somanuals.com. All Manuals Search And Download.

Handling Cautions

Precaution

• Before connecting other components to this HDD &

DVD RECORDER, be sure to turn them all off.

• Do not move the HDD & DVD RECORDER while a

disc is being played, or the disc may be scratched

or broken, the HDD & DVD RECORDER’s internal

parts may be damaged.

Important Safety Instructions

• Do not put a flower vase filled with water or any

small metal objects on the HDD & DVD

RECORDER.

Read these operating instructions carefully before using

the unit. Follow all the safety instructions listed below.

Keep these operating instructions handy for future

reference.

• Be careful not to put your hand into the disc tray.

• Do not place anything other than the disc in the

disc tray.

1) Read these instructions.

• Exterior interference such as lightning and static

electricity can affect normal operation of this HDD

& DVD RECORDER. If this occurs, turn the HDD &

DVD RECORDER off and on again with the DVD

POWER button, or disconnect and then reconnect

the AC power cord to the AC power outlet. The

HDD & DVD RECORDER will operate normally.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings, Install in

accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or

grounding- type plug. A polarized plug has two

blades with one wider than the other. A grounding-

type plug has two blades and a third grounding

prong. The wide blade or the third prong are

provided for your safety. if the provided plug does

not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

• Be sure to remove the disc and turn off the HDD &

DVD RECORDER after use.

• Disconnect the AC power cord from the AC outlet

when you don’t intend to use the HDD & DVD

RECORDER for long periods of time.

• Clean the disc by wiping in a straight line from the

inside to the outside of the disc.

Maintenance of Cabinet

10) Protect the power cord from being walked on or

pinched particularly at plugs, convenience

receptacles, the point where they exit from the

apparatus.

11) Only use attachments/accessories specified by the

manufacturer.

12) Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid

injury from tip-over.

For safety reasons, be sure to disconnect the AC

power cord from the AC outlet.

•

Do not use benzene, thinner, or other solvents

for cleaning.

•

Wipe the cabinet with a soft cloth.

HDD (Hard Disc Drive)

The hard disk has a high storage density, which

enables long recording durations and quick

access to written data. However, it can easily be

damaged by shock, vibration or dust and should

be kept away from magnets. To avioid losing

important data, observe the following precautions.

13) Unplug this apparatus during lightning storms or

when unused for long periods of time.

14) Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not operate

normally, or has been dropped.

• Do not use the HDD & DVD RECORDER in a

place subject to extreame changes in

temperature.

• Do not apply a strong shock to the HDD & DVD

RECORDER.

• Do not place the HDD & DVD RECORDER in a

location subject to mechanical vibrations or in an

unstable location.

English - 3

Download from Www.Somanuals.com. All Manuals Search And Download.

• Do not place the HDD & DVD RECORDER on

top of a heat source.

• Do not use discs printed with label printers

available on the market.

• Do not disconnect the AC power cord while the

power is on.

• Do not load warped or cracked discs.

• Do not attempt to change the hard disk. This

may result in a malfunction.

Should the hard disk be damaged, you cannot

recover lost data. The hard disk is only a

temporary storage space.

Disc Storage

Be careful not to harm the disc because the data on

these discs is highly vulnerable to the environment.

• Do not keep under direct sunlight.

• Keep in a cool ventilated area.

Disc Handling

• Store vertically.

• Keep in a clean protection jacket.

•

Did you move your HDD & DVD RECORDER

suddenly from a cold place to a warm place?

In this case, do not connect the plug to the power

outlet and wait for two hours. Then insert the disc and

try to playback again. It will work properly when

condensation has evaporated.

• Use discs with regular

shapes. If an irregular disc

(a disc with a special shape)

is used, this HDD & DVD

RECORDER may be damaged.

• Be careful not to harm the disc because the data on

these discs is highly vulnerable to the environment.

Holding discs

• Avoid touching the surface of a

disc where recording is

performed.

Disc Specifications

DVD-Video

DVD-RAM, DVD-RW and DVD-R

• A digital versatile disc (DVD) can contain up to

135-minutes of images, 8-language audio and 32

subtitle languages. It is equipped with MPEG-2 picture

compression and Dolby 3D surrounding, allowing you

to enjoy vivid and clear theater quality images in the

comfort of your own home.

• Clean with an optional DVD-RAM/PD

disc cleaner.

• Do not use cleaners or

cloths for CDs to clean DVD-RAM/

-RW/-R discs.

• When switching from the first layer to the second layer

of a double-layered DVD Video disc, there may be

momentary distortion in the image and sound. This is

not a malfunction of the unit.

DVD-Video, Audio-CD

• Once a DVD-RW/-R recorded in Video Mode is

finalized, it becomes DVD-Video.

• Wipe off dirt or contamination on the disc with a

soft cloth.

Audio CD

Cautions on handling discs

• An audio disc on which 44.1kHz PCM Audio is

recorded.

• Do not write on the printed side with a ball-point

pen or pencil.

• Do not use record cleaning sprays or antistatic.

Also, do not use volatile chemicals, such as

benzene or thinner.

• Plays CD-DA format audio CD-R and CD-RW discs.

The unit may not be able to play some CD-R or CD-

RW discs due to the condition of the recording.

• Do not apply labels or stickers to discs. (Do not

use discs fixed with exposed tape adhesive or

leftover peeled-off stickers.)

• Do not use scratch-proof protectors or covers.

4 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

• It takes about 30 seconds for the unit to complete

recording management information after recording

finishes.

CD-RW/-R

MP3 CD-RW/-R

• This product optimizes the DVD-R for each recording.

Optimizing is carried out when you start recording

after inserting the disc or turning on the unit.

Recording onto the disc may become impossible if

optimizing is carried out too many times.

• Only CD-R discs with MP3 files recorded with

ISO9660 or JOLIET format can be played back

• Only MP3 files with the ".mp3", ".MP3" extension can

be used.

• Playback may be impossible in some cases due to the

condition of recording.

• For MP3 files recorded with a VBR(Variable Bit

Rates), from 32 Kbps to 320 Kbps, the sound may cut

in out.

• This unit can play back DVD-R discs recorded and

finalized with a Samsung DVD video recorder. It may

not be able to play some DVD-R discs depending on

the disc and the condition of the recording.

• Playable bitrate range is from 56Kbps to 320Kbps.

• The unit can handle a maximum of 1000 files and

folders.

JPEG CD-RW/-R

DVD-RW Disc Playback and Recording

• Only JPEG files with the ".jpg", ".JPG" extension can

be used.

• Recording and playback can be performed on DVD-

RW discs in both the Video and VR Modes.

• The unit can handle a maximum of 1000 files and

folders.

• Once a DVD-RW recorded in VR Mode or Video

mode is finalized, you cannot perform addtional

recording.

• Maximum size of progressive JPEG is 3M pixels.

• MOTION JPEG is not supported.

• Once a DVD-RW recorded in Video Mode is finalized,

it becomes DVD-Video.

• In both modes, playback can be performed before and

after finalization, but additional recording, deleting and

editing can not be performed after finalization.

Using CD-RW/-R

• Use a 700MB(80 minutes) CD-RW/-R disc.

If possible, do not use a 800MB(90 minutes) or above

disc, as the disc may not play back.

• If you want to record the disc in VR Mode and then

record in V Mode, be sure to execute Format.

Be careful when executing Format because all the

recorded data may be lost.

• If the CD-RW/-R disc was not recorded as a closed

session, you may experience a delay in the early

playback time, and all recorded files may not play.

• A DVD-RW blank disc is initialized to VR Mode when

first initialized.

• Some CD-RW/-R discs may not be playable with this

unit, depending on the device which was used to burn

them.

• DVD-RW (VR mode)

For contents recorded on CD-RW/-R media from CDs

for your personal use, playability may vary depending

on contents and discs.

- This is a format that is used for recording data on a

DVD-RAM or DVD-RW disc. You can record

multiple titles, edit, delete, partial delete, create a

playlist, etc.

- A disc that is recorded in this mode may not be

played by an existing DVD player.

DVD-R Disc Playback and Recording

•

DVD-RW (Video mode)

• Once a DVD-R recorded in Video Mode is finalized, it

becomes a DVD-Video disc.

- This is a format that is used for recording data

on a DVD-RW or DVD-R disc. The disc can be

played by an existing DVD player once it has

been finalized.

• You can record onto the available space on the disc

and perform editing functions such as giving titles to

discs and programs and erasing programs before

finalizing.

- If a disc that has been recorded in Video

Mode by a different maker’s recorder but has

not been finalized, it cannot be played or

additionally be recorded by this HDD & DVD

RECORDER.

• When programming is erased from a DVD-R, that

space does not become available. Once an area on a

DVD-R is recorded on, that area is no longer available

for recording, whether the recording is erased or not.

English - 5

Download from Www.Somanuals.com. All Manuals Search And Download.

Protection

DVD-RAM Disc Playback and Recording

This HDD & DVD RECORDER can allow you to protect

the contents of your discs, as described below.

• DVD-RAM discs come with or without a cartridge. For

this product, we recommend DVD-RAM discs that

come without cartridges.

• Program-protected: See page 89 “Locking a Title”

• Disc-protected: See page 114 “Disc Protection”

• Ensure that the recording mode is set to VR mode.

Otherwise, this product will not be able to play the

recording.

❋

DVD-RAM/-RW/-R discs that are incompatible with

the DVD-VIDEO format cannot be played with this

product.

• You cannot play a DVD-RAM in most DVD players

due to compatibility issues.

❋

For more information on DVD recording compatibility,

consult your DVD-RAM/-RW/-R manufacturer.

• Only DVD-RAM standard Version 2.0. discs can be

played in this unit.

Use of poor quality DVD-RAM/-RW/-R discs may

cause following unexpected problems including,

without limitation, recording failure, loss of recorded

or edited materials or damage to the HDD & DVD

• DVD-RAM recorded on this unit may not work with

other DVD players. To determine compatibility with

these DVD-RAM discs, refer to the user’s manual for

the player.

RECORDER

• For cartridge type DVD-RAM discs, remove the

cartridge and use the disc only.

Do not use the following discs!

Disc Copy

Contents Copy Specifications

• LD, CD-G, CD-I, CD-ROM, DVD-ROM, DVD+R and

DVD+RW discs should not be used in this product.

[Note]

Disc types that can be played : CD/CD-R/CD-

RW/MP3/JPEG/DVD-Video/DVD-RAM/-RW/-R.

For a DVD-RW/-R disc, which has been recorded in

Video Mode on another component, it can play only

when finalized.

Contents

Recorded Video Title

Copy Protected Title

HDD ꢀ DVD

Supported

Not supported

Move

DVD ꢀ HDD

Supported

Not supported

Copy Once Title

(Deletes the Title in the Not supported

HDD after copying)

• Some commercial discs and DVD discs purchased

outside your region may not be playable with this

product. When these discs are played, either “No

disc.” or “Please check the regional code.” will be

displayed.

MP3

JPEG(photo)

Not supported

supported

Once “Copy Once program” has been recorded on the

DVD disc, this title cannot be copied to HDD anymore.

But “Copy Once program” has been recorded on the

HDD, this title can be copied to DVD-RW(VR mode) or

DVD-RAM.

• If your DVD-RW disc is an illegal copy or is not in

DVD video format, it may also not be playable.

COPY PROTECTION

Disc compatibility

• Many DVD discs are encoded with copy

protection. Because of this, you should only

connect your HDD & DVD RECORDER directly to

your TV, not to a VCR. Connecting to a VCR

results in a distorted picture from copy-protected

DVD discs.

• This product incorporates copyright protection

technology that is protected by methods claims of

certain U.S. patents and other intellectual

property rights owned by Macrovision Corporation

and other rights owners. Use of this copyright

protection technology must be authorized by

Macrovision Corporation, is intended for home

and other limited viewing uses only unless

otherwise authorized by Macrovision Corporation.

Reverse engineering or disassembly is prohibited.

• High Speed Recording discs can be used in this unit.

• Not all brands of discs will be compatible with this

unit.

• The latest firmware upgrade to improve recording &

playback quality can be downloaded from our web

site. (Download Center at www.samsung.com)

• If disc compatibility problems continue, or there is an

issue upgrading your HDD & DVD RECORDER,

contact the Call Center at 1-800-SAMSUNG.

6 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Step 4 : Connecting External devices . . . . . . . . . .26

Connecting an external device to the AV 1 IN or

Contents

AV 2 IN jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Connecting a Camcorder to the DV IN jack . . . . . . . .27

Connecting a Cable box to the G-Link jack . . . . . . . .28

Step 5 : Connecting the Power Cord . . . . . . . . . .29

Getting Started

System Setup

Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Precaution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . .3

Handling Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Maintenance of Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . .3

HDD (Hard Disk Drive) . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Disc Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Disc Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Disc Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Disc Copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

General Features . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Before Reading the User’s Manual . . . . . . . . . . . . .10

How to use the HDD & DVD RECORDER . . . . . . .10

Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Front Panel Display . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Tour of the Remote Control . . . . . . . . . . . . . . . . . . . . . .16

On-Screen Menu Navigation.....................................30

OSD Language Setup ...............................................31

Auto Clock Set ...........................................................31

Manual Clock Set.......................................................33

Auto Channel Memory...............................................34

Manual Channel Set..................................................35

Auto Power Off Setting..............................................36

CM Skip Time Setting................................................37

EP Mode Time Setting...............................................38

Setting up the Front Display Options........................39

Automatic Chapter Creator........................................40

Setting up the Language Options.............................41

Setting up the Audio Options.....................................42

Setting up the Video display Options........................44

Setting up the Progressive scan...............................45

Canceling the Progressive scan ...............................46

Setting up the Parental Control.................................47

If you forgot your password............................................47

Setting the Rating Level..................................................48

Changing the Password .................................................48

Connecting & Setting up

Quick Overview . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Step 1: Connecting the Antenna Cable . . . . . . . . .18

Antenna + HDD & DVD RECORDER + TV :

Playback

No Cable box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Antenna + Cable box + HDD & DVD RECORDER +

TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Step 2 : Connecting the Video cable . . . . . . . . . . .20

Connecting to a Video input jack . . . . . . . . . . . . . . . .20

Connecting to an S-Video input jack . . . . . . . . . . . . .21

Before Playing............................................................49

Playing a Disc.............................................................50

Using the Disc Menu & Title Menu ...........................51

Using the Search & Skip Functions..........................51

Slow Motion Play/Step Motion Play..........................52

About ANYKEY ..........................................................53

Playing the Title List...................................................55

Navigation Menu........................................................56

Using Markers............................................................59

Using the Bookmarks ................................................61

Selecting the Subtitle Language ...............................63

Selecting the Soundtracks & Audio Channels .........64

Changing the Camera Angle.....................................65

Connecting to Component video input jacks(Y ,P , P ) . .22

Step 3 : Connecting the Audio cable . . . . . . . . . . .23

Connecting to your TV . . . . . . . . . . . . . . . . . . . . . . . .23

Connecting to a stereo amplifier

with analog input jacks . . . . . . . . . . . . . . . . . . . . . . .24

Connecting to an AV amplifier

with a digital input jack . . . . . . . . . . . . . . . . . . . . . . .25

English - 7

Download from Www.Somanuals.com. All Manuals Search And Download.

Copying from DVD to HDD.....................................110

Copying MP3 or JPEG Files

Repeat Play................................................................65

Zooming-In .................................................................67

Select Media...............................................................68

Playing an Audio CD/MP3.........................................68

Viewing a Picture .......................................................75

from a Disc to HDD..................................................111

File Copy ........................................................................111

Folder Copy ...................................................................112

Disc Manager...........................................................113

Editing the Disc Name ..................................................113

Disc Protection...............................................................114

Formatting a Disc ..........................................................115

Delete All Title Lists/Music Lists/Photo Lists................116

Delete All Title Lists ......................................................117

Finalizing a Disc ........................................................... 118

Unfinalizing a Disc (V/VR mode) .................................119

Recording

Before Recording.......................................................78

Recording the current TV

program you are watching.........................................80

Recording from external equipment

you are watching........................................................82

Copying from a Camcorder.......................................83

Making a One Touch Recording (OTR)....................84

Chasing Play ..............................................................85

Simultaneous Recording and Playback ...................86

Additional Information

Troubleshooting .......................................................120

Problems and Solutions...........................................124

Specifications ...........................................................126

Editing

TV Guide On Screen^®^®User Manual

Basic Editing (Title List).............................................88

Renaming(Labeling) a Title.............................................88

Locking (Protecting) a Title ............................................89

Deleting a Title.................................................................90

Splitting a Section of a Title (Split) .................................91

Deleting a Section of a Title (Partial Delete) .................93

Advanced Editing (Playlist) .......................................95

Creating a Playlist ..........................................................95

Playing Entries in the Playlist ........................................96

Renaming a Playlist Entry...............................................97

Editing a Scene for the Playlist.......................................98

Deleting a Playlist Entry from the Playlist....................102

Copying from HDD to DVD.....................................103

About the Copy Screen ................................................103

Changing the Record Mode .........................................106

Copying Multiple Titles at One Time ......................106

Deleting an Undesired Title

Notice ......................................................................128

TV Guide On Screen Overview .............................128

Listing .......................................................................129

Search ......................................................................130

Recordings................................................................133

Schedule ..................................................................135

Setup ......................................................................137

Record ......................................................................143

Remind .....................................................................147

Guide Navigation ....................................................152

Remote Control . ......................................................152

Screen Components ...............................................153

Panel Menu .............................................................156

Guide Setup for a DVD Recorder ..........................157

Frequently Asked Questions(FAQs) ......................162

Troubleshooting .......................................................163

TV Guide On Screen Glossary ..............................164

Warranty ...................................................................167

from the Copy List.........................................................108

Previewing a Selected Title

from the Copy List.........................................................108

Selecting Record Mode of Each Title

from the Copy List........................................................109

Changing Record Mode of All Titles

from the Copy List........................................................109

8 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Creating a DVD video title using DVD-RW/-R disc

With the HDD & DVD RECORDER, you can create your

own DVD Video titles on 4.7 GB DVD-RW/-R discs.

General Features

Copying data from a digital camcorder using a DV

input jack

Record DV Device video onto HDD, DVD-RAM, DVD-RW

or DVD-R discs using the DV input jack (IEEE 1394-

4pin/4pin). (See page 83)

The HDD (Hard Disk Drive) & DVD RECORDER allows

you to record and play high quality digital video on DVD-

RAM/-RW/-R discs or on the HDD. You can also edit

digital images on DVD-RAM/-RW/-R discs or HDD.

High quality progressive scan

Progressive scanning provides high resolution and flicker

free video. The 10-bit 54-MHz DAC and 2D Y/C

Separating Circuitry provides the highest image playback

and recording quality. (See pages 44~46)

HDD Recording

You can record up to 208 hours of video (in Extend EP

mode) on the internal 120GB (gigabyte) hard disk (HDD).

With both recordable DVD and a high-capacity HDD in the

same recorder, you have the flexibility to keep recordings

on the HDD for quick access anytime, or record to DVD

for archiving or playing on other DVD players.

A variety of functions with an easy-to-use

user interface

The integrated menu system allows you to perform

desired operations both easily and conveniently. With a

HDD, DVD-RAM or DVD-RW disc, you can edit recorded

video, create a playlist, edit video in a specific sequence

according to your requirements.

Copy between HDD and DVD

You can copy recordings from the HDD to recordable

DVD, or from DVD to the HDD. Usually you can use the

high speed copy feature.

You can also choose to copy material at a different

recording quality from the original. For example, you might

want to copy at XP mode (highest quality) recording on

the HDD to SP (standard play) quality on a DVD so that

you can fit other recordings on the same disc.

Simultaneous Recording and Playback

Playback and recording for both the DVD and the built-in

hard disk drive (HDD) are completely independent. For

example you can record a broadcast program to either a

recordable DVD or the HDD, while watching another

recording you already made on the same DVD or on the

HDD.

High quality digital audio and video recording and

playback

Record up to 16-hours of video with a double sided 9.4

GB DVD-RAM disc, up to 8-hours of video with a 4.7 GB

DVD-RAM/-RW/-R disc, up to 208 hours of video with the

HDD, depending on the recording mode.

Selectable Recording Mode

You can set your HDD & DVD RECORDER to one of four

different recording speeds, each varying in recording

quality and length. EP (6Hr or 8Hr) mode yields the most

recording time, LP & SP modes provide less recording

time with higher quality recording, XP mode gives you the

highest quality recording.

English - 9

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Reading the

User’s Manual

manual may be reproduced or copied without the prior

written permission of Samsung Electronics Co.

Make sure to check the following terms before reading

the user manual.

How to use the

HDD & DVD RECORDER

Icons that will be used in manual

Icon

Term

HDD

Definition

This involves a function available

on the HDD.

This involves a function available

on DVD or DVD-R/DVD-RW

discs that have been recorded

and finalized in Video Mode.

Step 1

Select the disc type or HDD

DVD

This unit can record on the following types of discs.

If you want to repeatedly record on the same disc

or you want to edit the disc after recording, select a

rewritable DVD-RW or DVD-RAM type disc. If you

want to save a recording without any changes,

choose a non-rewritable DVD-R. You can record

files directly to the built-in HDD or edit a recorded

file.

This involves a function available

on DVD-RAM.

RAM

This involves a function available

on DVD-RW.

This involves a function available

on DVD-R.

This involves a function available

on a data CD (CD-R or CD-RW).

This involves a function available

on CD-R/-RW.

JPEG

MP3

This involves a function available

on CD-R/-RW.

This involves a case where a

Caution function does not operate or

settings may be cancelled.

Step 2

Format the disc to start recording

Unlike a VCR, the HDD & DVD RECORDER

automatically starts formatting when an unused

disc is inserted. This is required for the preparation

of recording on a disc.

This involves tips or instructions

on the page that help each

function operate.

NOTE

Using the HDD

Formatting unneccessory.

One-Touch A function that can be operated

button by using only one button.

Using a DVD-RAM

ANYKEY A function that can be operated

button by using ANYKEY button.

This type of disc can be formatted in DVD-Video

Recording format (VR mode). You can edit

recorded video and create a playlist and edit video

in a specific sequence according to your

requirements.

About the use of this user’s manual

Using a DVD-RW

1) Be sure to be familiar with Safety Instructions before

using this product. (See pages 2~6)

2) If a problem occurs, check the Troubleshooting.

(See pages 120~123)

This type of disc can be formatted in either

DVD-Video format (V mode) or DVD-Video

Recording format (VR mode). For an unused disc,

a message that asks whether to format in VR Mode

or not is displayed. You can play a Video mode

disc on various DVD components. A VR mode disc

allows more varied editing.

Using a DVD-R

This type of disc can be formatted in DVD Video

format. After formatting is complete, you can record

on the disc. You can play these type of discs on

various DVD components only when they have

been finalized.

10 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

You can only use either the VR or Video

mode on a DVD-RW, but not both at the

same time.

You can change the DVD-RW to another

format by reinitializing. It should be noted

that the disc's data will be lost when

changing formats.

NOTE

Step 5

Editing a recorded disc

Editing on discs is easier than conventional video

tapes. The HDD & DVD RECORDER supports many

different edit functions, possible only with DVDs and

HDD.

With a simple and easy edit menu, you can operate

various edit functions, such as delete, copy, rename,

lock, etc., on a recorded title.

Step 3

Recording

Creating a playlist (DVD-RAM/-RW in VR mode,

HDD)

With this HDD & DVD RECORDER, you can create a

new playlist on a disc and edit it without the original,

pre-existing recording.

There are two different recording methods, Direct

Recording and Timer Recording. Timer recording is

classified as Follows:

Recording mode : XP (high quality mode), SP

(standard quality mode), LP (long recording mode),

and EP (extended mode)

Finalizing & Playing on

Step 6

other DVD components

To play your DVD on other DVD components,

finalizing may be necessary. First, finish all editing and

recording operations, then finalize the disc.

Step 4

Playing

You can select the title you want to play in a

displayed menu and then immediately start

playback.

When using a DVD-RW disc in VR Mode

DVD discs recorded in VR mode can only be played

back in DVD recorders, not players.

A DVD consists of sections, called titles, and

sub- sections, called chapters.

When using a DVD-RW disc in Video Mode

The disc should be finalized first to enable playback

on anything other than this HDD & DVD RECORDER.

No more editing or recording can be made on the disc

once it has been finalized.

To enable recording on the disc again, the disc must

be unfinalized.

During recording, a title is created between two

points where you start and stop recording.

Chapters will be created automatically when you

finalize recording on DVD-RW/-R discs in Video

mode.

When using a DVD-R disc

The chapter’s length (interval between chapters)

varies according to the recording mode.

You should finalize the disc to play it on a component

other than this HDD & DVD RECORDER. You cannot

edit or record on the disc once it has been finalized.

English - 11

Download from Www.Somanuals.com. All Manuals Search And Download.

Unpacking

Dispose of batteries according to local environmental

regulations. Do not put them in the household trash.

Accessories

Check for the supplied accessories below.

RF Cable for TV

AC39-42001J

Video/Audio Cable

AC39-00073A

Setting the Remote Control

You can control certain functions of another

manufacturer’s TV with this remote control.

Control function buttons involve: TV POWER

CH , TV VOL + -, number buttons, TV MUTE

INPUT button.

IR Blaster cable

AK39-00055A

Remote Control

AK59-00023L

Quick Guide

Batteries for Remote

Control (AAA Size)

AC43-12002H

AK68-00827B

TV Guide Setup

Quick Guide

AK68-00827D

Instruction Manual

AK68-00758B

Preparing the Remote Control

Install Batteries in the Remote Control

•

Open the battery cover on the back of the remote control.

Insert two AAA batteries. Make sure that the polarities

(+ and -) are aligned correctly.

•

Replace the battery cover.

If the remote does not operate properly:

•

Check the polarity + - of the batteries (Dry-Cell)

Check if the batteries are drained.

Check if remote sensor is blocked by obstacles.

Check if there is any fluorescent lighting nearby.

12 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Controlling TVs with the Remote Control

1. Press and hold the TV POWER button.

2. Enter a 2-digit code by using the numerical buttons

on the remote control.

BRAND

BUTTON

SELECO

SHARP

36, 37, 38, 39, 48

SIEMENS

SINGER

See “Controllable TV Codes”

SINUDYNE

SONY

If the code works, your TV set will be turned on or off.

If it does not respond, try other codes.

Controllable TV Codes.

35, 48

TELEAVA

TELEFUNKEN

THOMSON

THOMSON ASIA

TOSHIBA

WEGA

67, 73, 75, 76

BRAND

BUTTON

72, 73, 75

AIWA

80, 81

ANAM

10, 11, 12, 13, 14, 15, 16, 17, 18

47, 48, 49, 50, 51, 52

BANG & OLUFSEN

BLAUPUNKT

BRANDT

BRIONVEGA

CGE

YOKO

ZENITH

CONTINENTAL EDISON 75

If several codes are indicated for your

television brand, try each one in turn until

you find one that works.

DAEWOO

19, 20, 23, 24, 25, 26, 27, 28, 29, 30, 31,

NOTE

32, 33, 34

EMERSON

FERGUSON

FINLUX

If you replace the remote control's

batteries, you must set the brand code

again.

06, 49, 57

FORMENTI

FUJITSU

GRADIENTE

GRUNDIG

HITACHI

IMPERIAL

JVC

49, 52, 71

Then you can control the television using the following

buttons after pressing the TV button.

60, 72, 73, 75

61, 79

Button

Function

06, 19, 20, 21, 22, 78

TV POWER

INPUT

Used to switch the television on and off.

Used to select an external source.

Used to adjust the volume of the television.

Used to select the desired channel.

Used to toggle the sound on and off.

Used to input number directly.

LOEWE

06, 69

LOEWE OPTA

MAGNAVOX

METZ

06, 57

TV VOL (+ -)

CH (

)

MITSUBISHI

MIVAR

06, 48, 62, 65

TV MUTE

0~9

52, 77

NEC

NEWSAN

NOBLEX

NOKIA

The functions listed above will not necessarily

work on all televisions. If you encounter

problems, operate the television directly.

NORDMENDE

PANASONIC

PHILIPS

72, 73, 75

NOTE

53, 54, 74, 75

06, 55, 56, 57

PHONOLA

PIONEER

RADIOLA

RADIOMARELLI

RCA

06, 56, 57

58, 59, 73, 74

06, 56

45, 46

REX

SABA

57, 72, 73, 74, 75

SALORA

SAMSUNG

SANYO

01,02,03,04,05,06,07,08,09

41, 42, 43, 44, 48

SCHNEIDER

English - 13

Download from Www.Somanuals.com. All Manuals Search And Download.

Description

Front Panel

13 14

1. POWER BUTTON

8. CH BUTTONS

Turns the HDD & DVD RECORDER

on and off.

Select TV preset Channels. Same as CH

button on the remote control.

2. DVD BUTTON

9. AV 2 INPUT

Select DVD mode.

Connect external equipment.

3. HDD BUTTON

10. DV-INPUT

Select HDD mode.

Connect external digital equipment with a DV

jack. (such as a camcorder)

4. DISC TRAY

Opens to accept a disc.

11. OPEN/CLOSE BUTTON

Opens and closes the disc tray.

5. DISPLAY

Displays the playing status, time, etc.

12. PLAY/PAUSE BUTTON

Plays a disc or pauses playback or recording.

6. STOP BUTTON

Stops disc playback.

13. P.SCAN BUTTON

Selects the progressive scan mode.

7. SEARCH/SKIP BUTTONS

Goes to the next title/chapter/track or goes

back to the previous title/chapter/track.

14. REC BUTTON

Starts recording.

Front Panel Display

1. Lights when a disc is loaded.

2. Lights in the record mode.

4. Playing time/clock/current status indicator.

5. Lights in the progressive scan mode.

3. Lights when a -R/RW/RAM disc is loaded.

14 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Rear Panel

Fan

Ensure a minimum of 4” clear space on all sides of the

fan when installing the product.

1. DIGITAL AUDIO OUT(OPTICAL)

6. COMPONENT VIDEO OUT(best video quality)

Connects to an amplifier having a digital optical

audio input jack.

Connects to equipment having Component video

input jacks.

2. DIGITAL AUDIO OUT(COAXIAL)

7. AV 1 AUDIO IN

Connects to an amplifier having a digital coaxial

audio input jack.

Connects the output of external equipment using

audio cables.

3. AV AUDIO OUT

8. AV 1 VIDEO IN

Connects to the audio input of external

equipment using audio cables.

Connects the output of external equipment using

a video cable.

4. AV VIDEO OUT(good video quality)

9. AV 1 S- VIDEO IN

Connects the input of external equipment using a

Video cable.

Connects the output of external equipment using

an S-Video cable.

5. AV S-VIDEO OUT(better video quality)

10. ANT IN/ANT OUT (TO TV)

Connects antenna cables.

11. G-LINK

Connects the input of external equipment using

an S-Video cable.

Connection of the IR Blaster for a cable box.

The Antenna connection does not pass the

output signal of the DVD. To watch

DVD/HDD playback your TV, you must

connect audio/video cables.

NOTE

English - 15

Download from Www.Somanuals.com. All Manuals Search And Download.

12. MENU Button

Tour of the Remote Control

Brings up the HDD & DVD RECORDER’s setup menu.

13. ENTER/DIRECTION Buttons (…†œ √ Buttons)

14. RETURN Button

15. INFO Button

This will display current setting or disc status.

16. REC Button

Use to make a recording on HDD/DVD-RAM/-RW/-R

discs.

17. COPY Button

Press this when you copy DVD to HDD or vice-versa.

To start copying, press the COPY button on the title list

screen or press the COPY button during the playback.

18. REPEAT Button

Allows you to repeat a title, chapter, track or disc.

19. REC PAUSE Button

Use this to pause during recording.

20. TV POWER Button

21. AUDIO/TV MUTE Button

Use this to access various audio functions on a disc

(DVD mode). In TV mode, this operates as sound mute.

22. INPUT Button

Select line input signal in external input mode.

(

Tuner, AV1, AV2 or DV Input

23. TV Button

Press this to operate TV.

)

24. OPEN/CLOSE Button

To open and close the disc tray.

25. CM SKIP Button

When a program recorded on DVD disc or HDD is played,

the unit can be set to automatically skip a portion of the

program.

26. CH Button

Use this to select a TV channel.

1. DVD POWER Button

2. NUMBER Buttons

27. PLAY/PAUSE Button

Press to play/pause a disc.

3. 100+ Button

28. PLAY LIST/TITLE MENU Button

Use this to return to the Title menu, or to view the

recorded files list.

Press this to select channel 100 or higher.

4. DVD Button

Press this to operate DVD.

29. ANYKEY Button

5. HDD Button

Allows access to common functions of the recorder.

Press this to operate HDD.

30. CANCEL Button

6. TV VOL Button

31. SUBTITLE Button

TV volume adjustment

Press this to switch the DVD’s subtitle language.

7. REVERSE/FORWARD SKIP Buttons

32. TV GUIDE

Press to skip backwards or forwards.

PAGE UP/DOWN Buttons When in the guide, moves, when

applicable, from one set of screen information to the next

When watching TV, enters the Guide and highlights a

show listing.

When in the Guide, returns to display the current

broadcast.

8. REVERSE/FORWARD STEP Buttons

Each press will play one-frame forward or reverse.

9. REVERSE/FORWARD SEARCH Buttons

Press to search a disc backwards or forwards.

33. MARKER Button

Use this to bookmark a position while playing a disc.

34. REPEAT A-B Button

Allows you to repeat a title, chapter, track or disc.

35. REC MODE Button

10. STOP Button

Use this to set the desired Recording time and picture

quality. (XP/SP/LP/EP)

Press to stop a disc.

11. TITLE LIST/DISC MENU Button

Use this to enter the View Recording list/disc menu.

16 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Overview

Connecting &

Setting up

AQuick Overview presented in this guide will give

you enough information to start using the HDD &

DVD RECORDER.

This section involves various methods of

connecting the HDD & DVD RECORDER to

other external components and required initial

setting modes.

Step 1 : Connecting the Antenna cable

†

Step 2 : Connecting the Video cable

†

Step 3 : Connecting the Audio cable

†

Step 4 : Connecting External devices

†

Step 5 : Connecting the Power cord

Quick Overview . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Step 1: Connecting the Antenna Cable . . . . . . . . .18

Step 2 : Connecting the Video cable . . . . . . . . . . .20

Step 3 : Connecting the Audio cable . . . . . . . . . . .23

Step 4 : Connecting External devices . . . . . . . . . .26

Step 5 : Connecting the Power Cord . . . . . . . . . . .29

•

Note to CATV system installer: This reminder is

provided to call CATV system installer’s attention to

Article 820-40 of the National Electrical Code

(Section 54 of Canadian Electrical Code, Part I),

that provides guidelines for proper grounding and,

in particular, specifies that the cable ground shall

be connected to the grounding system of the

building as close to the point of cable entry as

practical.

English - 17

Download from Www.Somanuals.com. All Manuals Search And Download.

Step 1: Connecting the Antenna Cable

There are several ways to connect your HDD & DVD RECORDER. Select one of the following antenna connections

that best suits you below.

Antenna + HDD & DVD RECORDER + TV : No Cable box

You can record non-scrambled channels by selecting the channel on the HDD & DVD RECORDER. Also use

this Method if you watch channels without cable box.

Wall

RF Cable

TO ANT IN

TO ANT OUT

TO ANT INPUT

ꢀ

The VHF/UHF RF OUT jack of this

product sends only signals received

NOTE

through the antenna. It does not output

Audio/ video signals. You must connect

audio/video cables to view Video from the

unit. (i.e. DVD playback)

18 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Antenna + Cable box + HDD & DVD RECORDER + TV

You can record channels by selecting the channel on the cable box. You cannot record one channel while

watching another channel. Be sure that the cable box is turned on.

Wall

TO ANT IN

TO ANT OUT

TO ANT INPUT

ꢀ

The VHF/UHF RF OUT jack of this

product sends only signals received

NOTE

through the antenna. It does not output

Audio/ video signals. You must connect

audio/video cables to view Video from the

unit. (i.e. DVD playback)

English - 19

Download from Www.Somanuals.com. All Manuals Search And Download.

Step 2 : Connecting the Video cable

There are several ways to connect your HDD & DVD RECORDER. Select one of the video connections on the

following pages. The VHF/UHF RF OUT jack of this product sends only signals received through the antenna. It does

not output audio/video signals. You must use one of the following audio/video connections on this unit.

Connecting to a Video input jack

Connect a video(yellow) cable between the VIDEO(yellow) OUT jack on the HDD & DVD RECORDER and

VIDEO(yellow) IN jack on the TV (or AV amplifier).

LINE IN

AUDIO

VIDEO

Red

Yellow

White

Audio/Video

Cable

• You will enjoy regular quality images.

• Connect audio cables(white and red) between the

AUDIO OUT jacks on the HDD & DVD RECORDER

and AUDIO IN jacks on your TV(or AV amplifier).

(See pages 23 ~ 25)

20 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting to an S-Video input jack

Connect an S-Video cable(not supplied) between the S-VIDEO OUT jack on the HDD & DVD RECORDER

and S-VIDEO IN jack on your TV (or AV amplifier).

LINE IN

S-VIDEO

S-Video

Cable

• You will enjoy high quality images. S-Video separates

ꢀ

S-Video and Component video outputs are

available only if your TV supports S-Video

input or Component video input,

respectively. If S-Video or Component

video output does not work, check the TV

connections and the TV input selection

settings.

the picture element into black and white (Y) and color

video input mode.

NOTE

• Connect audio cables(white and red) between the

AUDIO OUT jacks on the HDD & DVD RECORDER

and AUDIO IN jacks on your TV(or AV amplifier).

(See pages 23 ~ 25)

English - 21

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting to Component video input jacks(Y,P ,P )

LINE IN

Component

Cable

1. Connect Component video cables(not supplied)

between the COMPONENT OUT(Y,P^B,PR) jacks on

the HDD & DVD RECORDER and COMPONENT

IN(Y,P^B,PR) jacks on your TV (or AV amplifier).

2. If the TV connected supports Progressive Scan,

press the P.SCAN button on the front of the HDD

& DVD RECORDER to enjoy higher quality video.

3. The message “Press [Yes] to confirm Progressive

scan mode. Otherwise press [No]” will appear.

Press the œ √ buttons to select Yes, and then

press the ENTER button.

4. The message “Please set your TV to Progressive

input, To deactivate, press [STOP] key.” will

appear.

Press the ENTER button.

5. The message “Video Output Mode Progressive

Scan” will appear.

• Connect audio cables(white and red) between the

AUDIO OUT jacks on the HDD & DVD RECORDER

and AUDIO IN jacks on your TV(or AV amplifier).

(See pages 23 ~ 25)

ꢀ

Compared to standard interlaced video,

progressive scan doubles the amount of

video lines fed to your TV, resulting in a more

stable, flicker-free, and clear image than

interlaced video. The progressive scan video

output jack is used in progressive output

mode. This is only available with TVs that

support progressive scan.

NOTE

ꢀ

Progressive Scan Output (480p) “Consumers

should note that not all high definition television

sets are fully compatible with this product and

may cause artifacts to be displayed in the

picture. If you experience 480p progressive

scan picture problems, it is recommended that

you switch the connection to the ‘standard

definition’ output. If there are questions

regarding TV set compatibility with this model,

please contact our customer service center at

1-800-SAMSUNG.

• You will enjoy high quality accurate color

reproduction images. Component video separates

the picture element into black and White(Y),

blue(P ), red(P ) signals to present clear and clean

images.

22 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Step 3 : Connecting the Audio cable

There are several ways to connect your HDD & DVD RECORDER. Select the audio connection that best suits you

below.

Connecting to your TV

This connection will use your TV’s speakers.

Audio

Cable

Red

White

Yellow

AUDIO

VIDEO

LINE IN

English - 23

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting to a stereo amplifier with analog input jacks

If your stereo amplifier only has AUDIO INPUT jacks(L and R), use the AUDIO OUT jacks.

Audio

Cable

Red

White

ANALOG AUDIO

LINE IN

Front(L)speaker

Front(R)speaker

24 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting to an AV amplifier with a digital input jack

If your AV amplifier has a Dolby Digital or DTS decoder and a digital input jack, use this connection. To enjoy

Dolby Digital or DTS sound, you will need to set up the audio settings. (See pages 42~43)

Coaxial Cable

(not supplied)

Optical Cable

(not supplied)

AV amplifier

Digital Audio

LINE IN

Manufactured under license from Dolby

Laboratories. “Dolby” and the double-D symbol

are trademarks of Dolby Laboratories.

“DTS” and “DTS Digital Out” are trademarks of

Digital Theater Systems, Inc.

English - 25

Download from Www.Somanuals.com. All Manuals Search And Download.

Step 4 : Connecting External devices

This allows you to connect your HDD & DVD RECORDER to other external devices and view or record their outputs.

Connecting an external device to the AV 1 IN or AV 2 IN jacks

Connect a external device to AUDIO/VIDEO AV 1 IN jacks or AV 2 IN jacks of the HDD & DVD RECORDER.

You can record from connected equipment (VCR, STB, DVD, Cable Box or Camcorder).

Audio/Video

Cable

S-Video Cable

(not supplied)

AUDIO

VIDEO

S-VIDEO

Camcorder

LINE OUT

CABLE BOX

ꢀ

Copy protected content cannot be

recorded.

NOTE

26 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting a Camcorder to the DV IN jack

If your camcorder has a DV output jack, connect it to the DV input jack of your HDD & DVD RECORDER.

ꢀ

If the input is not selected automatically,

press the INPUT button on the remote to

NOTE

select proper input.

English - 27

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting a Cable box to the G-Link jack

Your cable box (not supplied) receives Guide show listings from TV Guide On Screen System on the HDD &

DVD RECORDER through the IR Blaster cable. Connect your cable box to the G-Link jack on the rear panel

of the HDD & DVD RECORDER using the IR Blaster cable as shown. This connection enables you to control

the cable box's power and channels.

IR Blaster cable

1 i^Mnch

Front Panel of CABLE BOX

G-Link wand

Getting Connected

1. Find and Connect the included G-Link cable into

the G-LINK jack of the HDD & DVD Recorder.

2. Find the Cable Box IR Sensor

Figure 2

To control cable box recording, find the IR sensor.

A. Turn the cable box Off.

B. Hold the cable box’s remote so that it touches

the front of the device (see Figure 1).

C. Move the remote across the front while pressing the

power button On and Off (Figure 2). (Press and

release the power button each time you move the

remote; holding down the button will not work.)

D. When the cable box powers On, you have

found the sensor.

3. Place the G-Link Wand

Place the G-LINK wand underneath the cable box

approximately 1 inch in front of the sensor you found in 2 .

Use the double-sided tape to secure the G-LINK wand.

E. Remember the location of the sensor.

ꢀ

You must select a cable box brand from

Figure 1

the list in Screen 8 on page 159. If you do not

NOTE

know the brand name, please contact your cable

provider. For more information, please refer to

pages 158~160.

ꢀ

After connecting cable box to the HDD & DVD

RECORDER through the IR Blaster cable, you must

follow the instructions in screen 4 on page 158.

Correct

Incorrect

28 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Step 5 : Connecting the Power Cord

“Auto” appears in the panel display. This means that the current time is being set automatically (Auto

Program) through the antenna under connection and also the channel is being set.

The setup may take a few minutes.

When the HDD & DVD RECORDER operates normally, the current time is automatically set and displayed in the front

panel display.

ꢀ

After the current time is set automatically,

HDD & DVD RECORDER will perform

NOTE

Auto Channel Memory for about 3

minutes. If power is turned on while Auto

Channel Memory is in process, Auto

Channel Memory will stop. In this case,

do Auto Channel Memory from MENU

(See page 34).

English - 29

Download from Www.Somanuals.com. All Manuals Search And Download.

On-Screen Menu

Navigation

System Setup

The on-screen menus allow you to enable or disable

various functions on your HDD & DVD RECORDER.

Use the following buttons to open and navigate

through the on-screen menus.

Setup

HDD

System

√

Title

Language

Audio

Music

Video

Photo

Parental Control

Timer Record

Setup

MOVE

SELECT

RETURN

EXIT

MENU Button

Press this button on the remote control to open

the on-screen menu.

Press again to exit the on-screen menu.

…†, œ √ Buttons

On-Screen Menu Navigation . . . . . . . . . . . . . . . . . . .30

OSD Language Setup . . . . . . . . . . . . . . . . . . . . . . . .31

Auto Clock Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Manual Clock Set . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Auto Channel Memory . . . . . . . . . . . . . . . . . . . . . . .34

Manual Channel Set . . . . . . . . . . . . . . . . . . . . . . . . .35

Auto Power Off Setting . . . . . . . . . . . . . . . . . . . . . . .36

CM Skip Time Setting . . . . . . . . . . . . . . . . . . . . . . . .37

EP Mode Time Setting . . . . . . . . . . . . . . . . . . . . . . .38

Setting up the Front Display Options . . . . . . . . . . . .39

Automatic Chapter Creator . . . . . . . . . . . . . . . . . . . .40

Setting up the Language Options . . . . . . . . . . . . . . .41

Setting up the Audio Options . . . . . . . . . . . . . . . . . . .42

Setting up the Video display Options . . . . . . . . . . . .44

Setting up the Progressive scan . . . . . . . . . . . . . . . .45

Canceling the Progressive scan . . . . . . . . . . . . . . . .46

Setting up the Parental Control . . . . . . . . . . . . . . . . .47

Press these buttons on remote control to move

the selection bar …†, œ √ to cycle through the

menu options.

ENTER Button

Press this button on the remote control to confirm any

new settings.

RETURN Button

Press this button on the remote control to return to

the Previous menu screen displayed or to exit the

on-screen menu.

30 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Auto Clock Set

OSD Language Setup

After plugging in the HDD & DVD RECORDER, the first

time you press the POWER button, this screen comes

up.

This menu is used to set the current time.

You need to set the time to use timer recording.

(This screen will only appear when you plug in the HDD

& DVD RECORDER for the first time.)

With the unit in Stop mode, press the MENU

button.

Press the HDD & DVD RECORDER POWER

button.

Title

HDD

Title

Press ENTER or Right button

for Title List.

Press a number button to select the desired

language.

Music

Photo

Timer Record

Setup

MOVE

SELECT

RETURN

EXIT

Press

Touche

Pulse

for English

pour Français

para Español

Press the …† buttons to select Setup, then press

the ENTER or √ button.

Setup

HDD

System

√

Title

Language

Audio

Music

Video

Photo

If the language for the startup screen is

not set, the settings may change

whenever you turn the power on or off.

Therefore, make sure that you select the

language you want to use.

Parental Control

Timer Record

Setup

NOTE

MOVE

SELECT

RETURN

EXIT

The TV Guide Setting menu (see page 136)

appears after language setup is done. If you

don't want to perform the TV Guide Setup now,

press the TV GUIDE button on the remote

control, and the Guide screen will disappear.

Press the …† buttons to select System, then

press the ENTER or √ button.

• System menu will be displayed.

System

HDD

Clock Set

√

Title

Channel Set

Music

Auto Power Off : Off

CM Skip Time

: 15 Sec

Photo

EP Mode Time : 6 Hour

Front Display

: Auto Dim

Timer Record

Setup

Chapter Creator : Off

MOVE

SELECT

RETURN

EXIT

English - 31

Download from Www.Somanuals.com. All Manuals Search And Download.

Clock Data CH

Select a channel that carries a time signal using the

Press the …† buttons to select Clock Set, then

press the ENTER or √ button.

…† buttons, then press the ENTER button.

• Select Auto to set the clock data channel

automatically.

Clock Set

HDD

Auto Clock Set

√

Title

Clock Data CH

Manual Clock Set

Music

HDD

Title

Photo

Select channel :

Auto

Music

Timer Record

Setup

Photo

Timer Record

Setup

MOVE

SELECT

RETURN

EXIT

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select Auto Clock Set,

then press the ENTER or √ button.

Time Zone

Select the time zone of your area using the …†

buttons, then press the ENTER or √ button.

• Select Automatic to set the time zone

automatically.

Press the …† buttons to select Auto Clock Set,

then press the ENTER or √ button.

Press the …† buttons to select On, then press

the ENTER or √ button.

Auto Clock Set

HDD

Auto Clock Set

Automatic

Auto Clock Set

Clock Data CH

Time Zone

: On

√

Title

HDD

Atlantic

: Automatic

Music

Eastern

: Automatic

Auto Clock Set

Clock Data CH

Time Zone

: On

Off

√

Title

Central

: Automatic

Daylight Saving

Photo

Music

Mountain

Pacific

Alaska

Hawaii

: Automatic

Daylight Saving

Timer Record

Setup

Photo

Timer Record

Setup

MOVE

SELECT

RETURN

EXIT

MOVE

SELECT

RETURN

EXIT

If your clock is set to the wrong time zone

or daylight saving, you can adjust these

settings without turning off the Auto Clock

Set function.

Daylight Saving

Select Automatic, No or Yes using the …† buttons,

then press the ENTER or √ button.

• Select Automatic to set the daylight saving

automatically.

NOTE

Select the sub menu(Clock Data CH, Time Zone

or Daylight Saving) using the …† buttons, then

press the ENTER or √ button.

Auto Clock Set

HDD

Auto Clock Set

Clock Data CH

Time Zone

: On

√

Title

: Automatic

Music

Daylight Saving

: Automatic

Automatic

Photo

Auto Clock Set

Timer Record

Setup

Yes

HDD

Auto Clock Set

Clock Data CH

Time Zone

: On

√

Title

: Automatic

MOVE

SELECT

RETURN

EXIT

Music

Daylight Saving

Photo

Timer Record

Setup

MOVE

SELECT

RETURN

EXIT

32 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select Manual Clock

Set, then press the ENTER or √ button.

Manual Clock Set

HDD

Title

Date

Time

If your clock cannot be set automatically, set the clock

manually.

Music

JAN / 01 / 2005 SAT 12 : 00 AM

Photo

Timer Record

Setup

0~9 NUMBER

SELECT

RETURN

EXIT

With the unit in Stop mode, press the MENU

button.

Use the …†œ √ buttons to select the Current

Date and Current Time, and then press the

ENTER button.

When the current time is stored in memory and

then the set is powered off, the current time will

appear in the front panel display.

Press the …† buttons to select Setup, then press

the ENTER or √ button.

Setup

HDD

System

√

Title

Language

Audio

Music

…† : Sets the value

Video

Photo

Parental Control

You can set the value using the number

buttons.

Timer Record

Setup

MOVE

SELECT

RETURN

EXIT

œ √: Moves to items

Press the …† buttons to select System, then

press the ENTER or √ button.

• System menu will be displayed.

System

HDD

Clock Set

√

Title

Channel Set

Music

Auto Power Off : Off

CM Skip Time

: 15 Sec

Photo

EP Mode Time : 6 Hour

Front Display

: Auto Dim

Timer Record

Setup

Chapter Creator : Off

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select Clock Set, then

press the ENTER or √ button.

Clock Set

HDD

Auto Clock Set

√

Title

Manual Clock Set

Music

Photo

Timer Record

Setup

MOVE

SELECT

RETURN

EXIT

English - 33

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select Channel Set,

then press the ENTER or √ button.

Auto Channel Memory

Channel Set

HDD

Antenna/Cable TV : Cable TV

Auto Channel Memory

√

Title

You can set the Antenna/Cable TV channel settings

automatically.

Music

Channel Add/Delete

Photo

Timer Record

Setup

With the unit in Stop mode, press the MENU

MOVE

SELECT

RETURN

EXIT

button.

Press the …† buttons to select Setup, then press

the ENTER or √ button.

Press the …† buttons to select Antenna/Cable

TV, then press the ENTER or √ button.

Setup

Channel Set

HDD

System

√

Title

Antenna/Cable TV : Cable TV

Antenna

√

Title

Language

Audio

Auto Channel Memory

Music

Cable TV

Music

Channel Add/Delete

Video

Photo

Parental Control

Photo

Timer Record

Setup

Timer Record

Setup

MOVE

SELECT

RETURN

EXIT

MOVE

SELECT

RETURN

EXIT

Select the item that matches the antenna

connection you selected on pages 18~19.

Press the …† buttons to select System, then

press the ENTER or √ button.

Select Antenna or Cable TV(depending on the

hookup you chose) using the …† buttons, then

press the ENTER or √ button.

• System menu will be displayed.

System

HDD

Select Auto Channel Memory using the …†

buttons, then press the ENTER or √ button.

Auto Channel Memory will be performed.

Clock Set

√

Title

Channel Set

Music

Auto Power Off : Off

CM Skip Time

: 15 Sec

Photo

EP Mode Time : 6 Hour

Front Display

: Auto Dim

Timer Record

Setup

Chapter Creator : Off

Auto Channel Memory

HDD

MOVE

SELECT

RETURN

EXIT

Title

Total channel numbers:

Saved channel :

15/125

Music

11%

Photo

Scanning...

Stop

Timer Record

Setup

SELECT

RETURN

EXIT

Press the RETURN or ENTER button to

stop Auto Channel Memory.

NOTE

34 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select Channel

Add/Delete, then press the ENTER or √ button.

Manual Channel Set

Channel Add/Delete

HDD

Title

Select channel :

Add

Music

Photo

Manual Channel Set can be used after you have first

performed Auto Channel Memory. Use the Manual

Channel Setting to delete unnecessary channels after

using the Auto Channel Memory.

Delete

Timer Record

Setup

MOVE

SELECT

RETURN

EXIT

With the unit in Stop mode, press the MENU

Press the …† or number buttons to select the

channels you want to add or delete on the Select

channel screen. Then, press the ENTER button.

button.

Press the …† buttons to select Setup, then press

the ENTER or √ button.

Channel Add/Delete

HDD

Title

Select channel :

Music

Setup

Channel is added.

Photo

HDD

Add

Delete

System

√

Title

Timer Record

Setup

Language

Audio

Music

Video

Photo

MOVE

SELECT

RETURN

EXIT

Parental Control

Timer Record

Setup

• Using …† buttons for channel selection allows

MOVE

SELECT

RETURN

EXIT

the user to add/delete one channel at a time.

• Using CH (

) buttons for channel selection

jumps to the next channel memorized in Auto

Channel Memory.

Press the …† buttons to select System, then

press the ENTER or √ button.

• System menu will be displayed.

Press the œ √ buttons to select Add or Delete,

then press the ENTER button.

• The message “Channel is added.” or “Channel is

deleted.” will be displayed in the center of the

screen.

System

HDD

Clock Set

√

Title

Channel Set

Music

Auto Power Off : Off

• Continue to add or delete as many channels as

you want to memorize or delete. This can be

used to add channels not stored automatically

due to weak signal strength.

CM Skip Time

: 15 Sec

Photo

EP Mode Time : 6 Hour

Front Display

: Auto Dim

Timer Record

Setup

Chapter Creator : Off

MOVE

SELECT

RETURN

EXIT

• Press the RETURN button to return to the

previous menu. Press the MENU button to exit

the menu.

Press the …† buttons to select Channel Set,

then press the ENTER or √ button.

Channel Set

HDD

Antenna/Cable TV : Cable TV

Auto Channel Memory

√

Title

Music

Channel Add/Delete

Photo

Timer Record

Setup

MOVE

SELECT

RETURN

EXIT

English - 35

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select the desired item,

then press the ENTER or √ button.

Auto Power Off Setting

•

Off : Auto power off is disabled.

2 Hour : HDD & DVD RECORDER will

automatically turn off for 2 hours after

the last button is pressed.

This feature automatically turns off your HDD & DVD

RECORDER if you do not press any button for 2 or 6

hours.

•

6 Hour : HDD & DVD RECORDER will

automatically turn off for 6 hours after

the last button is pressed.

If the turn off time set with the Auto Power off

function is reached during playback or recording,

the device will operate until the playback or

recording is finished.

With the unit in Stop mode, press the MENU

button.

Press the …† buttons to select Setup, then press

the ENTER or √ button.

Setup

HDD

System

√

Title

Language

Audio

Music

Video

Photo

Parental Control

Timer Record

Setup

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select System,

then press the ENTER or √ button.

System menu will be displayed.

System

HDD

Clock Set

√

Title

Channel Set

Music

Auto Power Off : Off

CM Skip Time

: 15 Sec

Photo

EP Mode Time : 6 Hour

Front Display

: Auto Dim

Timer Record

Setup

Chapter Creator : Off

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select Auto Power Off,

then press the ENTER or √ button.

System

HDD

Clock Set

√

Title

Channel Set

Music

Auto Power Off : Off

Off

CM Skip Time

: 15 Sec

2 Hour

Photo

EP Mode Time : 6 Hour

6 Hour

Front Display

: Auto Dim

Timer Record

Setup

Chapter Creator : Off

MOVE

SELECT

RETURN

EXIT

36 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select CM Skip Time,

then press the ENTER or √ button.

CM Skip Time Setting

System

HDD

Clock Set

√

Title

Channel Set

Music

Auto Power Off : Off

When a program recorded on a HDD, a DVD-RAM, a

DVD-RW, or a DVD-R is played, the unit can be set to

automatically skip a portion of the program corresponding

to a CM(commercial) skip time set by the user.

CM Skip Time

: 1515SeScec

Photo

EP Mode Time : 6 3H0oSurec

Front Display

: Au6t0oSDeicm

Timer Record

Setup

Chapter Creator : Off

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select the desired time

With the unit in Stop mode, press the MENU

button.

interval, then press the ENTER or √ button.

Press the …† buttons to select Setup, then press

the ENTER or √ button.

If you press the CM SKIP button during playback,

the section corresponding to the set time is

skipped, and then the next section is played.

Setup

HDD

System

√

Title

Language

Audio

Music

Video

CM Skip can be performed only during

Photo

Parental Control

normal playback.

Timer Record

Setup

NOTE

When the time set is more than a

remaining time of a current title: The next

title is played from the beginning.

MOVE

SELECT

RETURN

EXIT

When the time set is more than a

remaining time of a play list, the next

scene is played.

Press the …† buttons to select System, then

press the ENTER or √ button.

System menu will be displayed.

CM Skip does not work in still picture

mode.

System

When a set time is greater than the

HDD

remaining time of a scene, last title, or

last track that is currently displayed, a

prohibition mark appears.

Clock Set

√

Title

Channel Set

Music

Auto Power Off : Off

CM Skip Time

: 15 Sec

Photo

EP Mode Time : 6 Hour

Front Display

: Auto Dim

Timer Record

Setup

CM Skip releases Repeat (including

Repeat A-B, Chapter, and Title).

Chapter Creator : Off

MOVE

SELECT

RETURN

EXIT

CM Skip may not operate with some

DVD-Video discs.

English - 37

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select EP Mode Time,

then press the ENTER or √ button.

EP Mode Time Setting

System

HDD

Clock Set

√

Title

Channel Set

You can select one of four recording modes by pressing

the REC MODE button repeatedly.

EP mode is one of four REC modes (XP, SP, LP, EP).

In EP(Extended Play) mode, you can set recording time

to 6 or 8 hours with this setting.

Music

Auto Power Off : Off

CM Skip Time

: 15 Sec

Photo

EP Mode Time : 6 Hour

6 Hour

Front Display

: Auto Dim

Timer Record

Setup

8 Hour

Chapter Creator : Off

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select the desired time,

then press the ENTER or √ button.

With the unit in Stop mode, press the MENU

button.

Press the …† buttons to select Setup, then press

the ENTER or √ button.

Setup

HDD

System

√

Title

Language

Audio

Music

Video

Photo

Parental Control

Timer Record

Setup

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select System, then

press the ENTER or √ button.

System menu will be displayed.

System

HDD

Clock Set

√

Title

Channel Set

Music

Auto Power Off : Off

CM Skip Time

: 15 Sec

Photo

EP Mode Time : 6 Hour

Front Display

: Auto Dim

Timer Record

Setup

Chapter Creator : Off

MOVE

SELECT

RETURN

EXIT

38 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select Front Display,

then press the ENTER or √ button.

Setting up the Front

Display Options

System

HDD

Clock Set

√

Title

Channel Set

Music

Auto Power Off : Off

CM Skip Time

: 15 Sec

Photo

EP Mode Time : 6 Hour

Front Display

: Auto Dim

Bright

Timer Record

Setup

You can adjust the brightness of the unit’s front panel

display.

Chapter Creator : Off

Dim

Auto Dim

RETURN

MOVE

SELECT

EXIT

With the unit in Stop mode, press the MENU

button.

Press the …† buttons to select the desired item,

then press the ENTER or √ button.

• Bright : Makes the Front Panel Display bright.

• Dim : Makes the Front Panel Display dim.

• Auto Dim : Makes the Front Panel Display dim

automatically when the set is powered off.

Press the …† buttons to select Setup, then press

the ENTER or √ button.

Setup

HDD

System

√

Title

Language

Audio

Music

Video

Photo

Parental Control

Timer Record

Setup

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select System, then

press the ENTER or √ button.

System menu will be displayed.

System

HDD

Clock Set

√

Title

Channel Set

Music

Auto Power Off : Off

CM Skip Time

: 15 Sec

Photo

EP Mode Time : 6 Hour

Front Display

: Auto Dim

Timer Record

Setup

Chapter Creator : Off

MOVE

SELECT

RETURN

EXIT

English - 39

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select Chapter Creator,

then press the ENTER or √ button.

Automatic Chapter

Creator

System

DVD-RW(V)

Clock Set

√

Title

Channel Set

The Automatic Chapter Creator function doesn't operate

when you record the current TV program on the TV

GUIDE screen.

Music

Auto Power Off : Off

CM Skip Time

: 15 Sec

Photo

EP Mode Time : 6 Hour

Off

: Auto Dim

Front Display

Timer Record

Setup

Chapter Creator : OfOf n

MOVE

SELECT

RETURN

EXIT

(V mode)

With the unit in Stop mode, press the MENU

button.

Press the …† buttons to select On or Off, then

press the ENTER or √ button.

• Off: Select if you do not want use Automatic

Chapter Creator.

• On: Select this option to use the Automatic

Chapter Creator feature.

Press the …† buttons to select Setup, then press

the ENTER or √ button.

Setup

DVD-RW(V)

Press the MENU button to exit the menu.

System

√

Title

Language

Audio

Music

Video

Photo

Press the REC button to start recording. (See

page 79 about how to set recording speed) The

message “Do you want to create the chapter

menu after this recording?” is displayed.

Parental Control

Timer Record

Setup

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select System, then

press the ENTER or √ button.

System menu will be displayed.

Do you want to create the chapter menu

after this recording?

Yes

System

DVD-RW(V)

Clock Set

√

Title

Channel Set

Music

Auto Power Off : Off

CM Skip Time

: 15 Sec

Photo

EP Mode Time : 6 Hour

Front Display

: Auto Dim

Timer Record

Setup

Chapter Creator : Off

Press the œ √ buttons to select Yes and press

the ENTER button.

• A new chapter is created according to the selected

recording mode. A chapter will be about 5 minutes

long in XP and SP, and about 15 minutes long in LP

and EP mode.

MOVE

SELECT

RETURN

EXIT

40 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the STOP button to stop recording.

Setting up the Language

Options

To display the created titles, finalize the disc

(See page 118) and then press the TITLE MENU

button. Title menu will be displayed.

If you set the On-Screen menu, disc menu, audio and

subtitle language in advance, they will come up

automatically every time you watch a movie.

If the selected language is not recorded on the disc, the

original pre-recorded language is selected.

With the unit in Stop mode, press the MENU

button.

Top

Press the …† buttons to select Setup, then press

To display the created chapters, select the

desired Title and then press the DISC MENU

button. The chapter menu for the selected Title

will be displayed.

the ENTER or

√

button.

Setup

HDD

Title

System

√

Language

Audio

Music

Photo

CHAPTER

Video

Parental Control

Timer Record

Setup

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select Language, then

press the ENTER or √ button.

Language setup menu will be displayed.

Top

The Automatic Chapter Creator function does

not work during Timer Recording or when you

turn the power off.

Language

Caution

HDD

Audio

: Original

: Automatic

: English

√

Title

Subtitle

Music

Disc Menu

On-Screen menu

Photo

Timer Record

Setup

MOVE

SELECT

RETURN

EXIT

English - 41

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select the desired

language option, then press ENTER or √ button.

Setting up the Audio

Options

Language

HDD

Original

Audio

: Original

√

Title

You can connect the HDD & DVD RECORDER to an

external amp or Home theater.

Allows you to setup the Audio device and sound status

depending on the audio system in use.

English

Subtitle

: Automatic

Music

Français

: English

Disc Menu

On-Screen menu

Deutsch

: English

Photo

Español

Italiano

Timer Record

Setup

Nederlands

Korean

MOVE

SELECT

RETURN

EXIT

With the unit in Stop mode, press the MENU

button.

• Audio : For the disc audio language.

• Subtitle : For the disc subtitles.

• Disc Menu: For the disc menu contained on the

disc

Press the …† buttons to select Setup, then press

the ENTER or √ button.

• On-Screen Menu: For the on-screen menu of your

HDD & DVD RECORDER

Setup

HDD

System

√

Title

Press the …† buttons to select the desired

language, then press the ENTER or √ button.

Language

Audio

Music

Video

Photo

Parental Control

Install

Timer Record

Setup

MOVE

SELECT

RETURN

EXIT

Press the RETURN or œ button to return

Press the …† buttons to select Audio, then press

the ENTER or √ button.

Audio setup menu will be displayed.

to the previous menu. Press the MENU

button to exit the menu.

NOTE

The selected language will only appear if

it is supported on the disc.

Audio

HDD

Digital Output

DTS

: PCM

: Off

√

Title

Music

Dynamic Compression : On

Photo

Timer Record

Setup

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select the desired audio

option, then press the ENTER or √ button.

Press the …† buttons to select the desired item,

then press the ENTER or √ button.

Press the RETURN or œ button to return

to the previous menu.

NOTE

Press the MENU button to exit the menu.

42 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Digital Output

Dynamic Compression

This is only active when a Dolby Digital signal is

detected.

1. PCM : Select this when your equipment is not

Dolby Digital compatible.

2. Bitstream : Outputs Dolby Digital (or MPEG-2)

audio as bitstream. Select this

when your AV receiver or AV

1. Off : You can enjoy the movie with the

standard Dynamic Range.

amplifier has a Dolby Digital (or

MPEG-2) Decoder.

2. On : When Movie soundtracks are played at

low volume or from smaller speakers, the

system can apply appropriate

compression to make low-level content

more intelligible and prevent dramatic

passages from getting too loud.

ꢀ

Be sure to select the correct Digital

Output or you will hear no sound or a

loud noise.

NOTE

DTS

1. Off : Doesn’t output DTS signal. Select this

when your AV receiver or AV amplifier

does not have DTS decoder.

2. On : Outputs DTS Bitstream via digital output

when you play DTS track. Select this only

when your AV receiver (or AV amplifier)

have DTS decoder.

ꢀ

When DTS soundtrack is played, sound

does not output from AV Audio Output.

NOTE

English - 43

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select the desired item,

then press the ENTER or √ button.

Setting up the Video

display Options

Press the RETURN or œ button to return

to the previous menu.

NOTE

Press the MENU button to exit the menu.

This function allows you to setup the TV screen

settings. This function depends on disc type. It may

not work for some disc types.

TV Aspect

Depending on the type of television you have,

you may want to adjust the screen setting.

(aspect ratio)

With the unit in Stop mode, press the MENU

button.

1. 4:3 Letter Box : Select

when you want to see the

total 16:9 ratio screen DVD

supplies, even though you

have a TV with a 4:3 ratio

screen. Black bars will

Press the …† buttons to select Setup, then press

the ENTER or √ button.

appear at the top and

bottom of the screen.

Setup

HDD

System

√

Title

2. 4:3 Pan/Scan : Select this

for conventional size

Language

Audio

Music

Video

Photo

TVwhen you want to see

the central portion of the

16:9 screen. (Extreme left

and right side of movie

picture will be cut off.)

Parental Control

Timer Record

Setup

MOVE

SELECT

RETURN

EXIT

3. 16:9 Wide : You can view

the full 16:9 picture on your

widescreen TV.

Press the …† buttons to select Video, then press

the ENTER or √ button

Video setup menu will be displayed.

Video

Input Level

Adjusts the level of the input signal.

HDD

TV Aspect

Input Level

Black Level

: 16:9 Wide

: Lighter

: 0 IRE

√

Title

Music

1. Darker : If you feel the screen is too light and

you want to make the sceen darker.

2. Lighter : If you feel the screen is too dark and

you want to make the sceen lighter.

3D Noise Reduction : Off

Photo

Timer Record

Setup

MOVE

SELECT

RETURN

EXIT

Black Level

Adjusts the black level of the screen.

Press the …† buttons to select the desired video

option, then press the ENTER or √ button

1. 0 IRE : This is the standard NTSC reference

black level for consistent brightness/

contrast across all sources.

Select this when you want a darker

screen.

2. 7.5 IRE : This will enhance the black level for

increased brightness/contrast when

viewing DVDs. Select this when you

want a lighter screen.

Video

HDD

TV Aspect

Input Level

Black Level

: 16:9 Wide

√

4:3 Letter Box

Title

: Lighter

4:3 Pan/Scan

: 0 IRE

16:9 Wide

√

Music

√

3D Noise Reduction : Off

√

Photo

Timer Record

Setup

3D Noise Reduction (motion

adaptive noise reduction)

MOVE

SELECT

RETURN

EXIT

1. Off : Normal

2. On : Provides a clear picture through noise

reduction (for recording).

44 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

The message “Video Output Mode Progressive

Scan” will appear. The video will now be

Progressive Scan.

Setting up the

Progressive scan

If your TV supports Progressive Scan, press the

P.SCAN button on the front of the HDD & DVD

RECORDER. To view ‘Progressive scan mode’, first

connect the component cable.

Video Output Mode

Progressive Scan

(See page 22)

Be sure the Component cables are connected properly.

With the unit in Stop mode, press the P.SCAN button

on the front of the HDD & DVD RECORDER.

The message “Press [Yes] to confirm Progressive

scan mode. Otherwise, press [No].” will appear.

Press the œ √ buttons to select Yes, and then

press the ENTER button.

If the P.SCAN button on the HDD & DVD

RECORDER’s front panel is pressed

during playback, the message “This

function is possible only on stop mode”

appears on the screen.

NOTE

Progressive setting is only available when

the HDD & DVD RECORDER is in stop

mode.

Press [Yes] to confirm Progressive scan mode.

Otherwise, press [No].

Yes

The message “Please, set your TV to Progressive

input. To deactivate, press [STOP] key.” will

appear. Press the ENTER button.

Please, set your TV to Progressive input,

To deactivate, press [STOP] key.

English - 45

Download from Www.Somanuals.com. All Manuals Search And Download.

Do not press the P.SCAN button if you are

using a TV that does not support

Progressive mode as nothing will be

displayed on the screen.

NOTE

Canceling the

Progressive scan

If you press the P.SCAN button by mistake

when your TV does not support

Progressive mode, the mode will then

need to be released. To release the

Progressive mode, press the P.SCAN

button on the front panel 3 times. The

screen will recover after the PS indicator

on the front panel display turns off.

With the unit in Stop mode, press the P.SCAN button

on the front of the HDD & DVD RECORDER.

The message “Press [Yes] to confirm Interlace

scan mode. Otherwise, press [No].” will appear.

Press the œ √ buttons to select Yes, and then

press the ENTER button.

Press [Yes] to confirm Interlace scan mode.

Otherwise, press [No].

Yes

The message “Please, set your TV to Interlace

input. To deactivate, press [STOP] key.” will

appear. Press the ENTER button.

Please, set your TV to Interlace input,

To deactivate, press [STOP] key.

The message “Video Output Mode Interlace Scan”

will appear.

Video Output Mode

Interlace Scan

46 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Enter the 4-digit password using the number

buttons on the remote control.

The “Confirm the password” message will be

displayed. Enter your password again.

Setting up the Parental

Control

Parental Control

The Parental Control function works in conjunction with

DVDs that have been assigned a rating which helps you

control the types of DVDs that your family watches.

There are up to 8 rating levels on a disc.

HDD

Title

Confirm the password

Music

Photo

Timer Record

Setup

0~9 NUMBER

SELECT

RETURN

EXIT

With the unit in Stop mode, press the MENU

button.

Press the ENTER or √ button to select Password.

Press the …† buttons to select Setup, then press

the ENTER or √ button.

Parental Control

HDD

Password

: Off

Off

√

Title

Music

Setup

Photo

HDD

System

√

Title

Timer Record

Setup

Language

Audio

Music

Video

Photo

MOVE

SELECT

RETURN

EXIT

Parental Control

Timer Record

Setup

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select On or Off, then

press the ENTER or √ button.

Press the …† buttons to select Parental Control,

then press the ENTER or √ button.

The “Create the password” message will be

displayed

Press the RETURN or œ button to return

to the previous menu.

NOTE

Press the MENU button to exit the menu.

Parental Control

HDD

Title

Create the password

Music

Photo

If you forgot your password

Timer Record

Setup

0~9 NUMBER

SELECT

RETURN

EXIT

Remove the disc.

Press and hold the PLAY (

) and STOP (

)

buttons simultaneously on the front panel for 5

seconds or more.

English - 47

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting the Rating Level

Changing the Password

Press the …† buttons to select Rating Level,

Press the …† buttons to select Change Password,

then press the ENTER or √ button.

Parental Control

HDD

Parental Control

Password

: On

: Level 1-Kids

√

Title

HDD

Rating Level

Password

: On

: Level 1-Kids

√

Title

Music

Change Password

Rating Level

Music

Photo

Change Password

Photo

Timer Record

Setup

Timer Record

Setup

MOVE

SELECT

RETURN

EXIT

MOVE

SELECT

RETURN

EXIT

Parental Control

HDD

Title

Change Password

Level 8-Adults

: On

Password

√

HDD

Title

Level 7

Rating Level

Level 8 (Adults)

Level 6

Music

Enter the password

Change Password

Level 5

Music

Photo

Level 4

Photo

Level 3

Timer Record

Setup

Level 2

Timer Record

Setup

Level 1-Kids

MOVE

SELECT

RETURN

EXIT

0~9 NUMBER

SELECT

RETURN

EXIT

Press the …† buttons to select the rating level

Enter the 4-digit password using the number

buttons on the remote control.

you want, then press the ENTER or √ button.

The “Confirm the password” message will be displayed.

When you operate your HDD & DVD RECORDER

for the first time, the “Create the Password”

message will be displayed.

For example, if you select up to Level 6, discs that

contain Level 7, 8 will not play. A larger number

indicates that the program is intended for adult

use only.

Change Password

HDD

Title

Confirm the password

Music

Photo

Timer Record

Setup

0~9 NUMBER

SELECT

RETURN

EXIT

Enter your password again using the number

buttons on the remote control.

See page 47 if you forgot your password.

NOTE

48 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Playing

Playback

Read the following information before playing a disc.

This section introduces basic functions of

playback and playback by disc type.

Region code (DVD-Video only)

Both the HDD & DVD RECORDER and the discs are coded

by region. These regional codes must match in order for the

disc to play. If the codes do not match, the disc will not play.

The Region Number for this HDD & DVD RECORDER is

described on the rear panel of the HDD & DVD RECORDER.

Dolby Digital

Stereo

DTS

Digital Audio

MP3

Disc types that can be played

Disc Types

Disc Logo Recorded content

Disc Shape

Max. Playing Time

240

NTSC broadcast

system in U.S.A,

Canada, Korea,

Japan,etc.

Single sided(5”)

Double sided(5”)

Single sided(3.5”)

Double sided(3.5”)

Single sided(5”)

Single sided(3.5”)

480

160

DVD-VIDEO

AUDIO + VIDEO

AUDIO-CD

DVD-RAM

AUDIO

1 (XP: Excellent Quality)

2 (SP: Standard Quality)

4 (LP: Long Playback)

6 or 8 (EP:Extended)

2 (XP: Excellent Quality)

4 (SP: Standard Quality)

8 (LP: Long Playback)

12 or 16 (EP:Extended)

1 (XP: Excellent Quality)

2 (SP: Standard Quality)

4 (LP: Long Playback)

6 or 8 (EP:Extended)

1 (XP: Excellent Quality)

2 (SP: Standard Quality)

4 (LP: Long Playback)

6 or 8 (EP:Extended)

Single-sided

5” (4.7GB)

AUDIO + VIDEO

Double-sided

5” (9.4GB)

DVD-RW

AUDIO + VIDEO

5” (4.7GB)

Before Playing.....................................................................49

Playing a Disc......................................................................50

Using the Disc Menu & Title Menu ....................................51

Using the Search & Skip Functions...................................51

Slow Motion Play/Step Motion Play...................................52

About ANYKEY ...................................................................53

Playing the Title List ............................................................55

Navigation Menu .................................................................56

Using the Markers...............................................................59

Using the Bookmarks..........................................................61

Selecting the Subtitle Language ........................................63

Selecting the Soundtracks & Audio Channels ..................64

Changing the Camera Angle..............................................65

Repeat Play.........................................................................65

Zooming-In...........................................................................67

Select Media........................................................................68

Playing an Audio CD/MP3..................................................68

Playing a Picture .................................................................75

DVD-R

5” (4.7GB)

JPEG

MP3

CD-RW/-R

Approx. 29 (XP: Excellent Quality)

Approx. 55 (SP: Standard Quality)

Approx. 106 (LP: Long Playback)

HDD

AUDIO + VIDEO

Approx.157 or Approx. 208

(EP:Extended)

Discs that cannot be played

DVD-Video with a region number other than “1” or “ALL”

• 12cm 2.6 GB and 5.2 GB DVD-RAM

• 3.9 GB DVD-R Disc for Authoring.

• DVD-RAM/-RW(VR mode) not recorded following the Video Recording Standard

• Unfinalized DVD-R,unfinalized DVD-RW(V mode) recorded on other equipment.

• PAL Disc

• DVD-ROM/DVD+RW/PD/MV-Disc/DiVX Video Disc, etc.

• CVD/SVCD/CD-ROM/CDV/CD-G/CD-I/VCD

•

English - 49

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢀ

This HDD & DVD RECORDER can only

operate with discs that are compatible with

DVD-RAM Standard Version 2.0.

Playback and/or recording may not work for

some types of discs, or when specific

operations, such as angle change and

aspect ratio adjustment, are being

performed. Information about the discs is

written in detail on the box. Please refer to

this if necessary.

Do not allow the disc to become dirty or

scratched, finger prints, dirt, dust, scratches

or deposits of cigarette smoke on the

recording surface may make it impossible to

use the disc for recording.

DVD-RAM/-RW/-R discs may not be able to

play on some DVD players, depending on

the player, disc and the condition of the

recording.

Press the OPEN/CLOSE button.

NOTE

Place a disc gently into the tray with the disc’s

label facing up.

Press the OPEN/CLOSE button to close the disc tray.

ꢀ

•

Your HDD & DVD RECORDER closes the disc

tray and plays the disc automatically.

•

The HDD & DVD RECORDER does not play

discs automatically after the initial power on.

ꢀ

When the HDD & DVD RECORDER is powered

on and a disc is in the tray, the unit will be

activated and wait in stop status.

Discs with PAL programs recorded on them

cannot be recorded using this product.

•

Press the PLAY(

)

button to start playback.

If you insert an MP3 Disc, your HDD & DVD

RECORDER will display the file list on the

screen and start playing.

•

If you insert a JPEG Disc, folders and files are

displayed in the thumbnail picture.

If you want the unit to play automatically when it

is powered on with a disc in the unit, power on

Playing a Disc

with the PLAY(

)

button.

Press the STOP( ) button to stop playback.

ꢀ

When you stop playing back a disc, the HDD & DVD

RECORDER remembers where you stopped, so

NOTE

when you press PLAY(

)

button again, it will pick

up where you left off. (Unless the disc is removed or

the HDD & DVD RECORDER is unplugged, or if you

press the STOP(

)

button twice.).

ꢀ

Do not move your HDD & DVD RECORDER

while playing, as this may cause damage to

the disc.

Make sure to press the OPEN/CLOSE

button to open or close the disc tray.

Do not push the disc tray while it is being

opened or closed, as this may cause a

product malfunction.

Do not place foreign materials on or in the

disc tray.

Some functions may perform differently or

be disabled depending on the disc type.

If this occurs, refer to the instructions

written on the disc case.

Be especially careful that children's fingers

are not caught between the disc tray and

the tray chassis when it closes.

Caution

ꢀ

You must only insert one DVD disc at a

time. Inserting two or more discs will not

allow playback and may cause damage to

the HDD & DVD RECORDER

50 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Search & Skip

Functions

Using the Disc Menu &

Title Menu

Searching through a Chapter or

Track

Some type of discs contain a dedicated menu system that

allows you to select special functions for title, chapter, audio

track, subtitle, film preview, information on characters, etc.

For DVD-VIDEO discs

During play, press the SEARCH (

the remote control.

) buttons on

Press the DISC MENU button to enter the disc menu

of the disc.

•

Move to the setup menu related to playback

operation.

Fast X 2 ©

Fast X 8 ©

Fast X 32 ©

Fast X 4 ©

HDD/

DVD-VIDEO/

DVD-RAM/-RW/-R

Fast X 16 ©

•

You can select audio language and subtitle etc.

provided by the disc.

Fast X 128

X 2 ©

X 4 ©

X 8

AUDIO CD

(CD-DA)

Press the TITLE MENU button to move to the disc's

title menu of the disc.

• Press this button if the disc contains more than one

title. Some discs may not support the title menu

functionality.

•

You can scan the program in reverse.

To return to normal speed playback, press the

PLAY ( ) button.

•

When you press and hold the SEARCH (

)

buttons, playback is done at the default speed of

X4. If you release the SEARCH ( ) buttons,

playback is performed at a normal speed.

For HDD/DVD-RAM/-RW/-R Disc

•

The speed marked in this function may be

different from the actual playback speed.

Press the TITLE LIST button to display title list.

ꢀ

No sound is heard during Scan(Search)

mode, except with CDs (CD-DA).

ꢀ

Title List : Title List is a list of previously

NOTE

recorded programs. If a title is

deleted, that title cannot be

played again.

NOTE

ꢀ

Play List : This refers to a list of user-

selected titles. When one

playlist is played,only the scene

selected by the user will play

and then stop.

Even if the playlist is deleted,

the original recording will

remain. (VR mode only)

English - 51

Download from Www.Somanuals.com. All Manuals Search And Download.

Skipping Chapters, Tracks or

Markers

Slow Motion Play/

Step Motion Play

During play, you can search quickly through a chapter

or track.

Slow Motion Play

During play, press the SKIP (

) buttons on the

remote control.

•

If you press the SKIP (

it moves to the beginning of the chapter or track or

marker(HDD/DVD-RAM/-RW(VR mode)).

Pressing the button once again within 3 seconds

returns to the beginning of the previous chapter or

track or marker(HDD/DVD-RAM/-RW(VR mode)).

) button,

In pause or step mode, press the SEARCH (

the remote control.

) buttons on

•

If you press the SEARCH (

Slow 1/8 © Slow 1/4 ©

If you press the SEARCH ( button,

Slow 1/8 © Slow 1/4 © Slow 1/2

To return to normal speed playback, press the

PLAY ( ) button.

)

button,

If you press the SKIP (

it moves to the next chapter, track or marker

(HDD/DVD-RAM/-RW(VR mode)).

) button,

Slow 1/2

)

Press and hold the SEARCH (

)

buttons during

pause, the disc will play slowly at 1/4 speed. If the

button is released, the pause operation will resume.

ꢀ

The speed marked in this function may be

different from the actual playback speed.

NOTE

52 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Step Motion Play

About ANYKEY

Press the STEP(

)

buttons on the remote control

in the pause mode.

The ANYKEY function allows you to easily search for

a desired scene by accessing title, chapter, track,

time. You can also change the subtitle and audio

settings and set some features including Marker,

Angle, Zoom, Repeat, Select Media, Disc Manager.

•

Each time the button is pressed, a new frame will

appear.

When the STEP(

)

button is pressed, the previous

button is pressed, the next

frame will be activated.

When the STEP(

frame will be activated.

To return to normal speed playback, press the PLAY

) button.

)

Moving to a scene directly using the

ANYKEY

•

(

• If you want to move to a title, a chapter or a

track to find a desired scene.

Press the ANYKEY button during playback.

Navigation

Marker

√

Subtitle

√

Audio

Repeat

Zoom

Select Media

Disc Manager

√

Press the …† buttons to select Search, then

press the ENTER or

√

button.

HDD

Title

1/10

Time

00:01:45

MOVE

CHANGE

DVD-Video

Title

1/10

Chapter

Time

1/40

00:01:45

MOVE

CHANGE

English - 53

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢀ

This may not work for some discs. When

an audio CD(CD-DA) or an MP3 disc is

inserted, depending on the disc type, the

information display may not appear.

Press the …† buttons to select Title, Chapter

NOTE

or Track.

ꢀ

The Time Search function does not

operate in some discs.

To make the screen disappear, press the

Press the œ √ buttons or number buttons to

select the desired scene, then press the

ENTER button.

ANYKEY button again

•

If you want to move to a desired time the following

instructions will help you find a scene.

Press the ANYKEY button during playback.

Navigation

Marker

√

Subtitle

√

Audio

Repeat

Zoom

Select Media

Disc Manager

√

Press the …† buttons to select Search, then

press the ENTER or

√

button.

HDD

Title

1/10

Time

00:01:45

MOVE

CHANGE

DVD-Video

Title

1/10

Chapter

Time

1/40

00:01:45

MOVE

CHANGE

Press the …† buttons to select Time.

Enter the time in the sequence of hours, minutes,

and seconds using the number buttons, then

press the ENTER button.

54 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select an entry you

want to play from Title List, then press the

Playing the Title List

ENTER or PLAY (

)

button.

The selected entry (title) will be played back.

- About INFO button -

During playback, if you press the INFO button once

during playback, the system information screen

appears.: Displays Active Status, Background Status,

and Main Screen information.

Follow these instructions to play back a scene from the

Title List.

HDD

System Info

AM 12:00

Active status

Background Status

Screen

Play

– –

Playback

Using the TITLE LIST button

JAN/01/2005 (SAT)

With the unit in Stop mode/Playback mode, press the

TITLE LIST button.

The Title List screen is displayed.

Pressing the INFO button twice, Disc information screen

appears.: Displays Total numbers of Titles and Playlists,

Recordable Time(Title), Available Space(Music/Photo).

Title List

Length

HDD

No.

Title

001 JAN/18/2005 12:15A 00:10:21

002 JAN/19/2005 12:15A 00:40:03

003 JAN/20/2005 12:15A 00:20:15

004 JAN/25/2005 12:15A 00:50:16

HDD

Total Title

Disc Info

JAN/18/2005 12:15 AM CH11

JAN/18/2005 12:15 AM

Total Playlist

Recordable Time:Title

Available Space:Music/Photo 10033 MB

1/1 page

31:46 SP

MOVE

SELECT

RETURN

EXIT

JAN/01/2005 (SAT)

AM 12:00

Using the MENU button.

• With the unit in Stop mode/Playback mode,

press the MENU button.

Pressing the INFO button three times, Current playback

information screen appears.: Displays information of

Playback Name, Title, Created Time, Length, Playing

Time, Audio, and if the disc protection is activated.

Title

HDD

Press ENTER or Right button

Title

for Title List.

Music

Photo

HDD

Name

Playing Info

JAN/01/2005 12:39 AM

CH 9

Timer Record

Setup

Title

1/15

Created Time

JAN/01/2005 12:39 AM

00:01:43 SP

00:13:27

MOVE

SELECT

RETURN

EXIT

Length

Playing Time

Audio

Title Protection

Dolby Digital 1/1 L+R

Not Protected

•

Press the …† buttons to select Title, then

press the ENTER or button

JAN/01/2005 (SAT)

AM 12:00

√

To stop title play, press the STOP

(

)button.

To return the title list screen, press the TITLE

LIST button.

English - 55

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select an entry you

want to play from Title List, then press the

ANYKEY button.

Navigation Menu

Title List

HDD

Rename

No.

Title

Length

Protection

Copy

001 JAN/18/2005 12:15A 00:10:21

002 JAN/19/2005 12:15A 00:40:03

003 JAN/20/2005 12:15A 00:20:15

004 JAN/25/2005 12:15A 00:50:16

Scene Navigation

If there is a title composed of markers (see page 59),

you can search the desired scene using the Scene

Navigation.

Delete

Edit

√

Playlist

JAN/18/2005 12:15 AM CH11

Navigation

√

JAN/18/2005 12:15 AM

Select Media

^SPDisc Manager

1/1 page

MOVE

SELECT

RETURN

EXIT

(VR mode)

Press the …† buttons to select Navigation,

then press the ENTER or

√

button.

Using the TITLE LIST button

Title List

Length

HDD

Rename

No.

Title

Protection

Copy

001 JAN/18/2005 12:15A 00:10:21

002 JAN/19/2005 12:15A 00:40:03

003 JAN/20/2005 12:15A 00:20:15

004 JAN/25/2005 12:15A 00:50:16

With the unit in Stop mode/Playback mode, press the

TITLE LIST button.

The Title List screen is displayed.

Delete

Edit

√

Playlist

JAN/18/2005 12:15 AM CH11

Navigation

√

Scene Navigation

JAN/18/2005 12:15 AM

Select Media

Time Navigation

1/1 page

^SPDisc Manager

Title List

Length

MOVE

SELECT

RETURN

EXIT

HDD

No.

Title

001 JAN/18/2005 12:15A 00:10:21

002 JAN/19/2005 12:15A 00:40:03

003 JAN/20/2005 12:15A 00:20:15

004 JAN/25/2005 12:15A 00:50:16

JAN/18/2005 12:15 AM CH11

JAN/18/2005 12:15 AM

Press the …† buttons to select Scene

Navigation, then press the ENTER or

√

button.

1/1 page

MOVE

SELECT

RETURN

EXIT

Scene Navigation

HDD

Title List No. 1

Using the MENU button.

• With the unit in Stop mode/Playback mode,

press the MENU button.

01 00:00:16 01 00:05:16

1/1 Page

SELECT

Title

MOVE

RETURN

EXIT

HDD

Press ENTER or Right button

for Title List.

Title

Music

Photo

Press the …† œ √ buttons to select desired

scene, then press the ENTER or PLAY (

Timer Record

Setup

)

button.

MOVE

SELECT

RETURN

EXIT

• Press the …† buttons to select Title,

then press the ENTER or button

√

56 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Time Navigation

Using the ANYKEY button

(VR mode)

Press the ANYKEY button during playback.

Using this function, you can search scene minute-by-

minute from the recorded title list.

Using the TITLE LIST button

Navigation

Marker

√

Subtitle

√

Audio

Repeat

Zoom

With the unit in Stop mode/Playback mode, press the

TITLE LIST button.

The Title List screen is displayed.

Select Media

Disc Manager

√

Title List

Length

HDD

No.

Title

Press the …† buttons to select Navigation,

then press the ENTER or

001 JAN/18/2005 12:15A 00:10:21

002 JAN/19/2005 12:15A 00:40:03

003 JAN/20/2005 12:15A 00:20:15

004 JAN/25/2005 12:15A 00:50:16

√

button.

JAN/18/2005 12:15 AM CH11

JAN/18/2005 12:15 AM

1/1 page

Navigation

Marker

√

Scene Navigation

Time Navigation

MOVE

SELECT

RETURN

EXIT

Subtitle

√

Audio

Repeat

Zoom

Select Media

Disc Manager

√

Using the MENU button.

• With the unit in Stop mode/Playback mode,

press the MENU button.

Title

Press the …† buttons to select Scene

Navigation, then press the ENTER or

HDD

√

button.

Press ENTER or Right button

Title

for Title List.

Music

Scene Navigation

Photo

HDD

Title List No. 1

Timer Record

Setup

01 00:00:16 01 00:05:16

MOVE

SELECT

RETURN

EXIT

1/1 Page

SELECT

• Press the …† buttons to select Title,

then press the ENTER or button

MOVE

RETURN

EXIT

√

Press the …† œ √ buttons to select desired

scene, then press the ENTER or PLAY (

button.

)

ꢀ

Scene Navigation will not operate if a

selected title does not have Markers.

NOTE

English - 57

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select an entry you

want to play from Title List, then press the

ANYKEY button.

Using the ANYKEY button

Press the ANYKEY button during playback.

Title List

HDD

No.

Title

Length

Rename

Protection

Copy

001 JAN/18/2005 12:15A 00:10:21

002 JAN/19/2005 12:15A 00:40:03

003 JAN/20/2005 12:15A 00:20:15

004 JAN/25/2005 12:15A 00:50:16

Navigation

Marker

√

Delete

Edit

√

Subtitle

√

Playlist

Audio

JAN/18/2005 12:15 AM CH11

Navigation

√

Repeat

JAN/18/2005 12:15 AM

Select Media

Disc Manager

Zoom

1/1 page

Select Media

Disc Manager

√

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select Navigation,

then press the ENTER or

Press the …† buttons to select Navigation,

√

button.

then press the ENTER or

√

button.

Title List

Length

Navigation

Marker

√

Scene Navigation

Time Navigation

HDD

Rename

No.

Title

Protection

Copy

001 JAN/18/2005 12:15A 00:10:21

002 JAN/19/2005 12:15A 00:40:03

003 JAN/20/2005 12:15A 00:20:15

004 JAN/25/2005 12:15A 00:50:16

Subtitle

√

Audio

Delete

Edit

Repeat

√

Zoom

Playlist

JAN/18/2005 12:15 AM CH11

Navigation

√

Select Media

Disc Manager

√

Scene Navigation

JAN/18/2005 12:15 AM

Select Media

Time Navigation

1/1 page

Disc Manager

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select Time

Navigation, then press the ENTER or

√

button.

Press the …† buttons to select Time

Navigation, then press the ENTER or

√

button.

Time Navigation

HDD

Time Navigation

HDD

12:15 AM

√

12:15 AM

12:25 AM

RETURN

œ √

CHANGE

SELECT

EXIT

12:15 AM

√

12:15 AM

12:25 AM

RETURN

œ √

CHANGE

SELECT

EXIT

Press the œ √ buttons to skip one minute at a

time and search the desired scene, then press

the ENTER or PLAY (

)

button.

Press the œ √ buttons to skip one minute at a

time and search the desired scene, then press

the ENTER or PLAY (

)

button.

ꢀ

Cursor does not move if the selected

recorded title is shorter than 1 minute.

NOTE

ꢀ

The Navigation function may not work on a

disc that has not been recorded by this

device.

An edited title may not display the exact

search time.

58 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the ENTER button when the desired scene

appears.

Using Markers

•

The number 01 is displayed and the scene is memorized.

01 -- -- -- -- -- -- -- -- --

N:1

Marker

(VR mode)

MOVE

√ PLAY

CANCEL

RETURN

Using the MARKER button

Press the MARKER button during playback.

Press the œ √ buttons to move to the next position.

-- -- -- -- -- -- -- -- -- --

N:0

Marker

Press the ENTER button again when the desired

scene appears.

•

The number 02 is displayed and the scene is

SELECT

RETURN

memorized.

01 02 -- -- -- -- -- -- -- --

N:2

Marker

Using the ANYKEY button.

• Press the ANYKEY button during playback.

Navigation

Marker

√

MOVE

√ PLAY

CANCEL

RETURN

Subtitle

√

Audio

Repeat

Zoom

• HDD, DVD-RAM or DVD-RW (VR Mode) discs have

the Marker function instead of the Bookmark function.

The Marker function allows you to mark up to 99

scenes. Since the scenes may be displayed as many

different pages, numbering is necessary. If a disc in

use is encoded with Disc Protection, Markers cannot

be set or deleted, only playback is available.

Select Media

Disc Manager

√

• Press the …† buttons to select Marker,

then press the ENTER or button

√

English - 59

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing back a marker

Clearing a marker

Using the MARKER button

Press the MARKER button during playback.

01 02 -- -- -- -- -- -- -- --

N:2

Marker

01 02 03 04 05 06 07 08 09 10

√ N:10

MOVE

√ PLAY

CANCEL

RETURN

MOVE

√ PLAY

CANCEL

RETURN

Using the ANYKEY button.

• Press the ANYKEY button during playback.

Navigation

Marker

√

Navigation

Marker

√

Subtitle

√

Subtitle

√

Audio

Repeat

Zoom

Select Media

Disc Manager

√

Select Media

Disc Manager

√

• Press the …† buttons to select Marker,

then press the ENTER or button

• Press the …† buttons to select Marker,

then press the ENTER or button

√

Press the œ √ buttons to select a marked scene.

Press the CANCEL button to delete the selected

mark.

Press the œ √ buttons to select a marked scene.

01 02 -- -- -- -- -- -- -- --

N:2

Marker

01 02 03 04 05 06 07 08 09 10

√ N:10

Marker

MOVE

√ PLAY

CANCEL

RETURN

MOVE

√ PLAY

CANCEL

RETURN

01 02 03 04 05 06 07 08 09 --

N:9

Marker

Press the ENTER or PLAY (

)

button to start

playing from the selected scene.

• If you press the SKIP (

) button, it moves to

the beginning of the marker. Pressing the button

once again within 3 seconds returns to the

beginning of the previous marker.

MOVE

√ PLAY

CANCEL

RETURN

• If you press the SKIP (

) button, it moves to

the next marker.

60 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢀ

When a marker is cleared while HDD/DVD-

RAM/-RW (VR mode) is playing, marker

numbers will change. For example, if the 7th

marker is cleared after ten markers are

registered, the marker numbers after the

eighth will automatically move ahead by one

and the 8th marker becomes the 7th.

Press the ENTER button when the desired scene

appears.

•

The number 1 is displayed and the scene is

memorized.

- - - - - - - - --

Bookmark

Using the Bookmarks

MOVE

√ PLAY

CANCEL

RETURN

Press the œ √ buttons to move to the next

position.

(V-mode)

Press the ENTER button again when the desired

scene appears.

The number 2 is displayed and the scene is

memorized.

Using the MARKER button

Press the MARKER button during playback.

- - - - - - - --

Bookmark

- - - - - - - - - --

Bookmark

MOVE

√ PLAY

CANCEL

RETURN

MOVE

SELECT

RETURN

• Repeat above to bookmark other positions.

• You can bookmark up to 10 scenes.

Using the ANYKEY button.

• Press the ANYKEY button during playback.

ꢀ

When the disc tray is opened and then

closed, bookmarks will disappear.

Bookmark

Audio

√

NOTE

Subtitle

Angle

Repeat

Zoom

Select Media

√

• Press the …† buttons to select Bookmark, then

press the ENTER or button

√

English - 61

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing back a bookmark

Clearing a bookmark

Using the MARKER button

Press the MARKER button during playback.

- - - - - - - --

Bookmark

MOVE

√ PLAY

CANCEL

RETURN

MOVE

√ PLAY

CANCEL

RETURN

Using the ANYKEY button.

• Press the ANYKEY button during playback.

Bookmark

Audio

√

Audio

√

Subtitle

Angle

Subtitle

Angle

Repeat

Zoom

Repeat

Zoom

Select Media

√

Select Media

√

• Press the …† buttons to select Bookmark, then

press the ENTER or button

• Press the …† buttons to select Bookmark, then

press the ENTER or button

√

Press the œ √ buttons to select a bookmarked

scene.

Press the œ √ buttons to select a bookmarked

scene.

Press the ENTER or PLAY(

) button to start

- - - - - - - --

Bookmark

playing from the selected scene.

MOVE

√ PLAY

CANCEL

RETURN

Press the CANCEL button to delete the selected

bookmark.

62 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Selecting the Subtitle

Language

Using the ANYKEY button

Press the ANYKEY button during playback.

Selects one of the subtitle languages recorded on the

disc.

Navigation

Marker

√

Subtitle

√

Audio

Repeat

Zoom

Select Media

Disc Manager

√

(VR mode)

Using the SUBTITLE button

Press the …† buttons to select Subtitle, then

Press the SUBTITLE button during playback.

press the ENTER or

√

button.

Subtitle

Off

Navigation

Marker

√

Subtitle

√

Off

Audio

KOR

CHI

ENG

Repeat

Zoom

Select Media

Disc Manager

√

Press the …† buttons to select the desired subtitle

language, then press the ENTER or

√

button.

Press the …† buttons to select the desired

subtitle language. Also, press the SUBTITLE

button repeatedly to select the desired subtitle

language.

•

To make the screen disappear, press the

CANCEL or RETURN button.

ꢀ

The subtitle display may be different

depending on the disc type.

NOTE

ꢀ

Some discs allow you to select the

language for the disc menu only.

If the subtitles overlap, disable the caption

function on your TV.

English - 63

Download from Www.Somanuals.com. All Manuals Search And Download.

Selecting the Soundtracks

& Audio Channels

Using the ANYKEY button

Press the ANYKEY button during playback.

Selecting the Audio

Navigation

Marker

√

Selects one of the soundtracks recorded on the disc. Also

selects the audio channels from recorded TV programs.

Subtitle

√

Audio

Repeat

Zoom

Select Media

Disc Manager

√

(VR mode)

Using the AUDIO button

Press the …† buttons to select Audio, then

Press the AUDIO button during playback.

press the ENTER or

√

button.

HDD/DVD-RAM/-RW

Audio

Dolby Digital 2/0 L + R

Navigation

Marker

√

Subtitle

√

Audio

Dolby Digital 2/0 L + R

Dolby Digital 2/0 L

Dolby Digital 2/0 R

Repeat

Zoom

Select Media

Disc Manager

√

DVD-VIDEO

Press the …† buttons to select the desired

soundtracks or audio channel, then press the

ENTER or √ button.

Audio

ENG Dolby Digital 5.1CH

Soundtracks or Audio channel may be

different because they are disc-specific.

NOTE

Some discs allow you to select the audio

language for the disc menu only.

Press the …† buttons to select the desired

soundtracks or audio channel. Also, press the

AUDIO button repeatedly to select the desired

soundtracks or audio channel.

•

To make the screen disappear, then press the

CANCEL or RETURN button.

64 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Changing the Camera

Angle

Repeat Play

When a DVD-VIDEO contains multiple angles of a

particular scene, you can select the Angle function.

Playing Repeatedly(Repeat Playback)

Using the REPEAT button

Press the REPEAT button during playback.

Using the ANYKEY button

Press the ANYKEY button during playback.

Repeat

Off

Bookmark

Audio

√

Subtitle

Angle

Repeat

Zoom

Select Media

√

Press the …† buttons to select the Off, Title or

Chapter you want to play repeatedly, then

press the ENTER button.

Press the …† buttons to select Angle, then

press the ENTER or

√

button.

Repeat

Title

Bookmark

Angle 1

Angle 2

Angle 3

Angle 4

Angle 5

Angle 6

Audio

√

Subtitle

Angle

Repeat

Zoom

Select Media

√

Press the …† buttons to select the desired angle,

then press the ENTER or √ button.

This function is disc-dependent, and may

not work on all DVDs.

NOTE

This function does not work when a DVD

has not been recorded with a multi-

camera angle system.

English - 65

Download from Www.Somanuals.com. All Manuals Search And Download.

Repeat A-B

Using the ANYKEY button

Press the ANYKEY button during playback.

Using the REPEAT A-B button

Navigation

Marker

√

Press the REPEAT A-B button during playback.

Subtitle

√

Audio

Repeat

Zoom

Repeat A-B

Off

Select Media

Disc Manager

√

Press the …† buttons to select the Repeat,

then press the ENTER or

√

button.

Press the ENTER button at the point where you

want the repeat play to start (A) and press it again at

the point where you want the repeat play to stop (B).

Repeat playback of the A-B section starts.

Navigation

Marker

√

Subtitle

√

Audio

Repeat Off

Repeat

Repeat A - B

Repeat Title

Zoom

Select Media

Disc Manager

√

Repeat A-B

A-B

Press the …† buttons to select Repeat Off,

Repeat A-B, Repeat Title, Repeat Track or

Repeat Chapter you want to play repeatedly, then

press the ENTER or √ button.

HDD/DVD-RAM/-RW(VR mode), unfinalized

DVD-R and unfinalized DVD-RW (V mode)

discs will not repeat a chapter.

NOTE

66 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Zooming-In

Using the ANYKEY button

Press the ANYKEY button during playback.

Navigation

Marker

√

Subtitle

√

Audio

Repeat

Press the ANYKEY button during playback.

Zoom

Select Media

Disc Manager

√

Navigation

Marker

√

Subtitle

√

Audio

Press the …† buttons to select Repeat, then

press the ENTER or

Repeat

Zoom

√

button.

Select Media

Disc Manager

√

Navigation

Marker

√

Subtitle

√

Audio

Press the …† buttons to select Zoom, then press

the ENTER or button. will be displayed.

Repeat Off

Repeat A - B

Repeat Title

Repeat

Zoom

√

(

)

Select Media

Disc Manager

√

Press the …† buttons to select Repeat A-B,

then press the ENTER or button.

√

Press the ENTER button at the point where you

want the repeat play to start (A) and press it

again at the point where you want the repeat

play to stop (B).Repeat playback of the A-B

section starts.

Press …† œ √ buttons to move to the area you

want to enlarge.

Press the ENTER button.

- To return to normal playback -

The screen will be enlarged to twice the normal

size. The screen size will be enlarged to four times

the normal size.

Press the CANCEL button to return to normal

playback.

HDD/DVD-VIDEO/

DVD-RAM/-RW/-R

normal size ➔ X2 ➔ X4 ➔ X2

normal size

➔

If you set point (B) before five seconds of

playback has lapsed, the prohibition mark

NOTE

(

) will appear.

You can also activate Normal Playback by

When recording is done in the EP mode, the

Zoom function will not be supported except

when the recording has been done in V

mode.

pressing the CANCEL button.

NOTE

Audio CDs(CD-DA) and MP3 discs do not

support the Repeat A-B function.

English - 67

Download from Www.Somanuals.com. All Manuals Search And Download.

Select Media

Playing an Audio

CD/MP3

Playing an Audio CD(CD-DA)

Press the ANYKEY button during playback.

Insert an audio CD (CD-DA) into the disc tray.

• The audio CD menu appears and the tracks

(songs) are played automatically.

Navigation

Marker

√

Subtitle

√

Music List

Audio

TRACK

√ 02 : 10

Repeat

TRACK 1

TRACK 2

TRACK 3

TRACK 4

TRACK 5

TRACK 6

TRACK 7

Zoom

CDDA

Select Media

Disc Manager

√

CD-DA

01/15

04:57

1/3 Page

RETURN

MOVE

SELECT

EXIT

Press the …† buttons to select Select Media,

then press the ENTER or

√

button.

Press the …† buttons to select the track (song) you

Navigation

Marker

√

want to hear, and then press the ENTER button.

Subtitle

√

Audio

Repeat

Zoom

HDD

DVD

Select Media

Disc Manager

√

Audio CD(CD-DA) Screen Elements

Press the …† buttons to select HDD or DVD,

then press the ENTER or button.

Music List

TRACK

√ 02 : 10

√

TRACK 1

TRACK 2

TRACK 3

TRACK 4

TRACK 5

TRACK 6

TRACK 7

CDDA

CD-DA

01/15

04:57

1/3 Page

RETURN

MOVE

SELECT

EXIT

1. Current track (song): Displays the number of the

track currently being played.

2. Displays the current play index, total track number.

3. Display available buttons.

4. This shows the operating state of a disc and a

playback time corresponding to a portion that is

currently played.

5. Displays the track list (song list).

68 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Buttons on the Remote Control

used for Audio CD(CD-DA) playback

Playing an MP3 Disc

Insert an MP3 disc into the disc tray.

• The MP3 menu is displayed and the tracks

(songs) are played automatically

Music List

Flower.mp3

√ 02 : 10

Flower.mp3

MP3 Love.mp3

MP3 Straight from the heart.mp3

MP3 Run to you.mp3

MP3 Heaven.mp3

MP3

01/15

MP3 This Love.mp3

4.0 MB

1/3 Page

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select the track you want to

hear, and then press the ENTER button.

MP3 Screen Elements

Music List

Flower.mp3

√ 02 : 10

Flower.mp3

MP3 Love.mp3

MP3 Straight from the heart.mp3

MP3 Run to you.mp3

MP3 Heaven.mp3

MP3

01/15

MP3 This Love.mp3

4.0 MB

1/3 Page

1. …†: Selects a track (song).

2. œ √ : Moves the page up/down.

MOVE

SELECT

RETURN

EXIT

3. ENTER button: Plays the selected track (song).

4. SKIP

5. SKIP

(

) button: Plays the next track.

) button: Returns to the beginning of the

1. Current track (song): Displays the name of the

track being played.

2. Displays the current folder, play index and current

track size.

current track when pressed during playback.

If pressed again, your HDD & DVD RECORDER

moves to and plays the previous track.

If you press the this button within three seconds after

playback starts, the previous track will be played.

If you press the this button after three seconds, the

current track will be replayed from the beginning.

3. Displays available buttons.

4. This shows the operating state of a disc and a

playback time corresponding to a portion that is

currently played.

5. Displays the information for the folder and its tracks.

6. Press the SEARCH (

) buttons:

Fast Play (X2, X4, X8)

7. STOP

8. PLAY

(

) button: Stops a track(song).

) button: Plays a track(song) or pauses

If a disc contains only MP3 files or only

JPEG files, the MP3 or JPEG screen

playback.

NOTE

appears after the disc is loaded.

9. ANYKEY button: The ANYKEY menu is displayed.

(Play Mode, Go To Playlist or New Playlist).

If a disc contains a mix of MP3 and JPEG

files, you need to select Music for MP3

files or Photo for JPEG files.

English - 69

Download from Www.Somanuals.com. All Manuals Search And Download.

Buttons on the Remote Control

used for MP3 playback

Repeat CD (CD-DA) & MP3

Using the REPEAT button.

Press the REPEAT button during playback.

Music List

TRACK

√ 02 : 10

TRACK 1

TRACK 2

TRACK 3

TRACK 4

TRACK 5

TRACK 6

TRACK 7

CDDA

CD-DA

01/15

04:57

1/3 Page

RETURN

MOVE

SELECT

EXIT

Press the REPEAT button repeatedly to select the repeat

mode you want.

Music List

TRACK

√ 02 : 10

TRACK 1

TRACK 2

TRACK 3

TRACK 4

TRACK 5

TRACK 6

TRACK 7

CDDA

CD-DA

01/15

04:57

1/3 Page

RETURN

MOVE

SELECT

EXIT

•

Repeat Track (CD (CD-DA)/MP3)

Repeat Folder (MP3)

Repeat All (CD (CD-DA)/MP3)

1. …†: Selects a track (song).

2. œ √ : Moves the page up/down.

3. ENTER button: Plays the selected track (song).

Random (CD (CD-DA)/MP3): The random option

plays a disc’s track in random order.

• Normal (CD (CD-DA)/MP3): Track on a disc are

played in the order in which they were recorded on the

disc.

4. SKIP

5. SKIP

(

) button: Plays the next track.

) button: Returns to the beginning of the

current track when pressed during playback.

If pressed again, your HDD & DVD RECORDER

moves to and plays the previous track.

If you press the this button within three seconds after

playback starts, the previous track will be played.

If you press the this button after three seconds, the

current track will be replayed from the beginning.

- To return to normal playback -

Press the REPEAT or CANCEL button repeatedly

to return to normal playback.

6. STOP

(

) button: Stops a track(song).

7. PLAY

(

) button: Plays a track(song) or pauses

playback.

8. ANYKEY button: The ANYKEY menu is displayed.

(Copy, Play Mode, Go To Playlist, New Playlist or

Select Media).

70 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

New Playlist

Using the ANYKEY button

You can register a maximum 28 tracks in the playlist.

Press the ANYKEY button during the Music List

playback.

Press the ANYKEY button during the Music List

playback.

Music List

TRACK

» 02 : 10

TRACK 1

TRACK 2

TRACK 3

TRACK 4

TRACK 5

TRACK 6

TRACK 7

Music List

CDDA

TRACK

» 02 : 10

TRACK 1

TRACK 2

TRACK 3

TRACK 4

TRACK 5

TRACK 6

TRACK 7

CDDA

CD-DA

Play Mode

√

01/15

Go To Playlist

04:57

New Playlist

1/3 Page

RETURN

CD-DA

Play Mode

√

01/15

MOVE

SELECT

EXIT

Go To Playlist

04:57

New Playlist

1/3 Page

RETURN

MOVE

SELECT

EXIT

Press the …† buttons to select Play Mode,

then press the ENTER or

√

button.

Press the …† buttons to select New Playlist,

then press the ENTER or

√

button.

Music List

TRACK

» 02 : 10

TRACK 1

TRACK 2

TRACK 3

TRACK 4

CDDA

Make Playlist

_CDDN_Aormal

TRACK 5

CD-DA

CDDA

TRACK 1

TRACK 2

TRACK 3

TRACK 4

TRACK 5

TRACK 6

TRACK 7

Play Mode

√

_CDDR_Aepeat Track

TRACK 6

01/15

CDDA

_CDDR_Aepeat All

TRACK 7

Go To Playlist

04:57

New Playlist

Random

1/3 Page

RETURN

MOVE

SELECT

EXIT

1/3 Page

Add

MOVE

RETURN

EXIT

Press the …† buttons to select desired play mode,

then press the ENTER or button.

√

• Normal (CD (CD-DA)/MP3): Tracks on a disc are

played in the order in which they were recorded on the

disc.

Press the …† buttons to select tracks in the

order in which you want them to play, then

press the ENTER button.

•

Repeat Track (CD (CD-DA)/MP3)

Repeat Folder (MP3)

Repeat All (CD (CD-DA)/MP3)

Make Playlist

Random (CD (CD-DA)/MP3): The random option

plays a disc’s tracks in random order.

01.

02.

03.

04.

TRACK 1

TRACK 3

TRACK 7

TRACK 4

CDDA

TRACK 1

TRACK 2

TRACK 3

TRACK 4

TRACK 5

TRACK 6

TRACK 7

1/1 Page

RETURN

1/3 Page

MOVE

Add

EXIT

English - 71

Download from Www.Somanuals.com. All Manuals Search And Download.

Go To Playlist

If you playlisted a wrong track, press the √…†

buttons to select the wrong track, then press

the ENTER or CANCEL button. The wrong

track will be removed.

Press the ANYKEY button during the Music List

playback.

Make Playlist

Music List

01.

02.

03.

TRACK 1

TRACK 3

TRACK 7

TRACK 1

TRACK 2

TRACK 3

TRACK 4

TRACK 5

TRACK 6

TRACK 7

TRACK

» 02 : 10

CDDA

TRACK 1

TRACK 2

TRACK 3

TRACK 4

TRACK 5

TRACK 6

TRACK 7

CDDA

CD-DA

Play Mode

√

01/15

1/1 Page

1/3 Page

MOVE

Go To Playlist

04:57

New Playlist

1/3 Page

RETURN

Delete

EXIT

MOVE

SELECT

EXIT

To store the playlist, press the ANYKEY button.

Press the …† buttons to select Go To Playlist,

then press the ENTER or

√

button.

Make Playlist

01.

02.

03.

TRACK 1

TRACK 3

TRACK 7

CDDA TRACK 1

CDDA

TRACK 2

Playlist

00 : 00

CDDA

TRACK 3

TRACK 4

TRACK 5

TRACK 6

PLAYLIST

Playlist

^CDDAelete

TRACK 7

Go To Playlist

1/3 Page

1/1 Page

RETURN

PLAYLIST

- -

MOVE

SELECT

EXIT

00 : 00

1/1 Page

RETURN

MOVE

SELECT

EXIT

Press the …† buttons to select the Go To

Playlist, then press the ENTER button.

A new Playlist will be created.

Press the …† buttons to select the desired

playlist folder, then press the ENTER button.

The selected tracks are played automatically.

72 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Delete the Playlist

Go To Edit Playlist

Press the ANYKEY button during the Music List

playback.

Press the ANYKEY button during the Music List

playback.

Music List

TRACK

» 02 : 10

TRACK

» 02 : 10

TRACK 1

TRACK 2

TRACK 3

TRACK 4

TRACK 5

TRACK 6

TRACK 7

TRACK 1

TRACK 2

TRACK 3

TRACK 4

TRACK 5

TRACK 6

TRACK 7

CDDA

CD-DA

Play Mode

√

CD-DA

01/15

Play Mode

√

Go To Playlist

04:57

01/15

Go To Playlist

04:57

New Playlist

1/3 Page

RETURN

New Playlist

1/3 Page

RETURN

MOVE

SELECT

EXIT

MOVE

SELECT

EXIT

Press the …† buttons to select Go To Playlist,

then press the ENTER or

√

button.

Press the …† buttons to select Go To Playlist,

then press the ENTER or

√

button.

Playlist

00 : 00

PLAYLIST

Playlist

00 : 00

PLAYLIST

- -

Playlist

00 : 00

1/1 Page

RETURN

PLAYLIST

- -

MOVE

SELECT

EXIT

00 : 00

1/1 Page

RETURN

MOVE

SELECT

EXIT

Press the …† buttons to select the Playlist you

want to delete, then press the ANYKEY button.

Playlist

Press the …† buttons to select the Playlist you

want to edit, then press the ANYKEY button.

00 : 00

PLAYLIST

Playlist

Delete Playlist

PLAYLIST

Playlist

Go To Edit Playlist

01/02

Go To Music List

00 : 00

PLAYLIST

New Playlist

1/1 Page

Playlist

MOVE

SELECT

RETURN

EXIT

Delete Playlist

PLAYLIST

Go To Edit Playlist

01/02

Go To Music List

00 : 00

Press the …† buttons to select the Delete

Playlist, then press the ENTER or

New Playlist

1/1 Page

√

button.

MOVE

SELECT

RETURN

EXIT

Playlist

00 : 00

PLAYLIST

Playlist

Do you want to delete?

Playlist 1

SELECT

Yes

1/1 Page

MOVE

RETURN

EXIT

Press the œ √ buttons to select Yes, then press the

ENTER button. The selected Playlist is deleted.

English - 73

Download from Www.Somanuals.com. All Manuals Search And Download.

Go To Music List

Press the …† buttons to select the Go To Edit

Playlist, then press the ENTER or

√

button.

Press the ANYKEY button during the Playlist

playback.

Edit Playlist

CDDA

01.

02.

03.

04.

TRACK 1

TRACK 3

TRACK 7

TRACK 4

TRACK 1

TRACK 2

TRACK 3

TRACK 4

TRACK 5

TRACK 6

TRACK 7

CDDA

Playlist

TRACK

» 02 : 10

Playlist 1

TRACK 1

CDDA

TRACK 2

TRACK 3

TRACK 4

1/1 Page

RETURN

1/3 Page

MOVE

PLAYLIST

Add

EXIT

01/04

Go To Music List

04 : 30

New Playlist

MOVE

1/1 Page

SELECT

RETURN

EXIT

Press the …† buttons to select tracks in the order

in which you want them to play, then press the

ENTER button.

Press the …† buttons to select Go To Music List

then press the ENTER or

√

button.

If you playlisted a wrong track, press the

buttons to select the wrong track, then press the

ENTER or CANCEL button to remove the track.

√

…†

Music List

TRACK

√ 02 : 10

TRACK 1

TRACK 2

TRACK 3

TRACK 4

TRACK 5

TRACK 6

TRACK 7

CDDA

CD-DA

To store the playlist, press the ANYKEY button.

01/15

04:57

1/3 Page

RETURN

MOVE

SELECT

EXIT

Edit Playlist

CDDA

01.

02.

03.

04.

TRACK 1

TRACK 3

TRACK 7

TRACK 4

TRACK 1

TRACK 2

TRACK 3

TRACK 4

TRACK 5

TRACK 6

TRACK 7

CDDA

CDADdA d

Go To Playlist

1/3 Page

1/1 Page

RETURN

MOVE

Add

EXIT

Press the …† buttons to select the Go To

Playlist, then press the ENTER button.

Playlist will be edited.

74 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Select Media (MP3)

Viewing a Picture

Press the ANYKEY button.

Music List

flower.mp3

» 02 : 10

Insert a JPEG disc or Mixed disc (JPEG + MP3) into the

disc tray.

flower.mp3

MP3 Love.mp3

Copy

MP3 Straight from the heart.mp3

MP3 Run to you.mp3

MP3 Heaven.mp3

Play Mode

ROOT

√

Go To Playlist

01/15

MP3 This Love.mp3

New Playlist

4.0 MB

Select Media

Title

1/3 Page

Title

MOVE

SELECT

RETURN

EXIT

Press ENTER or Right button

for Title List.

Music

Photo

Timer Record

Setup

Press the …† buttons to select Select Media, then

press the ENTER or button.

MOVE

SELECT

RETURN

EXIT

√

Music List

Press the …† buttons to select Photo, then press the

flower.mp3

» 02 : 10

ENTER or

√

button.

flower.mp3

MP3 Love.mp3

Copy

MP3 Straight from the heart.mp3

MP3 Run to you.mp3

Play Mode

ROOT

√

Photo List

Index: 1/10

MP3 Heaven.mp3

Go To Playlist

01/15

MP3 This Love.mp3

HDD

DSC01194

New Playlist

4.0 MB

Select Media

DVD

1/3 Page

RETURN

MOVE

SELECT

EXIT

DSC01189

DSC01190

DSC01191

DSC01199

DSC01192

DSC01193

DSC01194

1/2 Page

SELECT

MOVE

RETURN

EXIT

Press the …† buttons to select HDD or DVD, then

press the ENTER or button.

√

If there are no mp3 files on the selected media,

it notifies you that there are no mp3 files and the

media will not be switched.

Press the …† œ √ buttons to select a picture.

•

To see the next 8 pictures, press the SKIP(

)

button.

•

To see the previous 8 pictures, press the

SKIP( ) button.

If a disc contains only MP3 files or only

JPEG files, the MP3 or JPEG screen

appears after the disc is loaded.

NOTE

If a disc contains a mix of MP3 and JPEG

files, you need to select Music for MP3

files or Photo for JPEG files.

English - 75

Download from Www.Somanuals.com. All Manuals Search And Download.

Slide Show

Rotate

To set up, follow steps 1~3 on page 75.

Press the ANYKEY button.

Press the ENTER button to select the picture you

want to see, then press the ANYKEY button.

Photo List

DSC01194

Index: 1/10

DSC01191

DSC01199

DSC01189

DSC01190

Slideshow

Rotate

√

Copy

Slide Show

DSC01192

Select Media

√

DSC01193

DSC01194

Zoom

√

1/2 Page

Go To Photo List

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select Slide Show,

Press the …† buttons to select Rotate, then

press the ENTER or button.

then press the ENTER or

√

button.

√

Photo List

Index: 1/10

DSC01194

DSC01189

DSC01190

DSC01191

DSC01199

Slideshow

Rotate

√

Copy

Slow

Rotate 90

Rotate 180

Rotate 270

√

DSC01193

√

Normal

Slide Show

DSC01192

Zoom

DSC01194

Fast

Select Media

Go To Photo List

1/2 Page

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select the slide show

speed, then press the ENTER or

Press the …† buttons to select the rotate angle,

then press the ENTER or button.

√

button.

√

The slide show starts.

- To stop the Rotate -

- To stop the Slide Show -

Press the ANYKEY button.

Rotate

√

Rotate Off

Go To Photo List

Slideshow

√

Slideshow Off

Go To Photo List

Press the …† buttons to select Rotate Off, then

press the ENTER or button.

√

Press the …† buttons to select Slideshow Off,

then press the ENTER or button.

√

76 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Zoom

Go To Photo List

To set up, follow steps 1~3 on page 75.

Press the ENTER button to select the picture you

want to see, then press the ANYKEY button.

Slideshow

Rotate

√

Slideshow

Rotate

√

Zoom

Go To Photo List

Go To Photolist

Press the …† buttons to select Zoom, then

press the ENTER or button.

√

Press the …† buttons to select Go To Photo

List, then press the ENTER or button.

√

Photo List

DSC01194

Index: 1/10

DSC01191

DSC01199

DSC01189

DSC01190

DSC01192

DSC01193 DSC01194

1/2 Page

MOVE

SELECT

RETURN

EXIT

Each time the ENTER button is pressed, the

picture is enlarged up to x4(four times the

normal size).

ꢀ X2 ꢀ X4 ꢀ X2 ꢀ Normal

- To stop the Zoom -

Press the ANYKEY button.

Zoom Off

Go To Photo List

Press the …† buttons to select Zoom Off, then

press the ENTER or

√

button.

English - 77

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Recording

Recording

This unit can record on various types of discs. Before

recording, read the following instructions and select the

disc type according to your preference.

Recordable Discs

This section shows various HDD & DVD

Recording methods.

This HDD & DVD RECORDER can record on the

following discs.

HDD

DVD-RAM

DVD-RW

DVD-R

•DVD-RWs and DVD-RAMs are rewritable.

DVD-Rs are non-rewritable

•

Compatibility between Samsung and Other Companies'

Recorders

Disc Types Recording Recording Device Finalizing Additional Recording

format

in Samsung Recorder

Samsung

Recordable

DVD-RAM

DVD-RW

VR Mode

Other Company

finalized

not finalized

finalized

not finalized

finalized

Not recordable

Recordable

Not recordable

Recordable

Samsung

VR Mode

V Mode

Other Company

Not recordable

Recordable

Not recordable

Recordable

Samsung

not finalized

finalized

not finalized

finalized

Other Company

Samsung

not finalized

V Mode

DVD-R

finalized

Not recordable

Other Company

not finalized

Before Recording . . . . . . . . . . . . . . . . . . . . . . . . .78

Recording the current TV

ꢀ

Finalize

- This closes the DVD-RW/-R so no

additional recording can be done.

Unfinalize

NOTE

program you are watching . . . . . . . . . . . . . . . . . . .80

Recording from external equipment

- This allows additional recording on a

DVD-RW disc originally recorded on the

HDD & DVD RECORDER.

- A DVD-RW disc that has been recorded

by DAO(Disc At Once) in a PC cannot be

unfinalized.

- A DVD-RW disc that has been recorded

in Video Mode of a different maker’s

recorder cannot be unfinalized.

you are watching . . . . . . . . . . . . . . . . . . . . . . . . . .82

Copying from a Camcorder . . . . . . . . . . . . . . . . . .83

Making an One Touch Recording (OTR) . . . . . . . .84

Chasing Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85

Simultaneous Recording and Playback . . . . . . . . .86

- A DVD-R disc cannot be unfinalized.

78 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording Formats

Recording Mode

Select one of four recording modes by pressing the

REC MODE button repeatedly while the unit is in Stop

mode for the desired recording time and picture quality.

In general, picture quality improves as the recording

time decreases.

When you insert an unused disc, the following message

appears. Since available functions differ depending on

the disc type, select a disc that best fits your preferences.

DVD-RAM: Use after formatting the disc.

Recording Times

Recording Mode

HDD (120GB)

DVD-RAM/-RW/-R

Approx. 1 hour

about 8.5 Mbps

Approx. 29 hours

Unformatted Disc

(high quality mode)

Do you want to format this disc?

Approx. 2 hours

about 4.5 Mbps

Yes

Approx. 55 hours

Approx. 106 hours

(standard quality mode)

Approx. 4 hours

about 2 Mbps

(long recording mode)

Approx. 6 hours/

about 1.6 Mbps

Approx. 8 hours/

about 1.2 Mbps

Approx. 157 hours

Approx. 208 hours

DVD-RW: When an unused DVD-RW disc is first

inserted, the message “Uninitialized Disc Do

you want to initialize this disc?” will be

displayed. If you select Yes, the disc will be

formatted in VR mode.

(extended mode)

ꢀ

Recording time may vary according to

specific conditions.

If you want to change the mode, refer to

Formatting a Disc on page 115.

NOTE

Unrecordable video

Uninitialized Disc

Do you want to initialize this disc?

Video with copy protection cannot be recorded on this

HDD & DVD RECORDER.

Yes

When the HDD & DVD RECORDER receives a copy-

guard signal while recording, recording stops and the

following message appears on the screen.

DVD-R: Formatting DVD is unnecessary and only Video

Mode Recording is supported.

DVD-RW(V mode)/-R

You cannot record copy protected movie.

• Chapters will be created automatically when you finalize

recording on DVD-RW/-R discs in Video mode.

The chapter’s length (interval between chapters) varies

according to the recording mode.

• Simple editing (erasing titles/changing title name)

Concerning Copy Control Signals

TV broadcasts that contain copy control signals may have

one of the following three signal types, Copy-Free, Copy-

Once and Copy-Never. If you want to record a copy-once

type program, use DVD-RW with CPRM in VR Mode and

DVD-RAM.

DVD-RAM/-RW(VR mode)

• This mode allows multiple editing functions (such as

deletion of the whole title, partial deletion of a title, etc.)

• Various editing options using a created Playlist.

English - 79

Download from Www.Somanuals.com. All Manuals Search And Download.

Signal type

Copy-Free

Copy-Once

Copy-Never

Media

DVD-RW(Ver.1.1)

with CPRM

Recording the current TV

program you are watching

VR mode

V mode

DVD-R

DVD-RAM(Ver.2.0)

Check that the disc has enough available space for the

recording. Adjust the recording mode.

This * marked parts are compatible with CPRM.

Once “Copy Once” has been recorded, recording

cannot be done anymore.

Press the HDD or DVD button.

If you select DVD, Press the OPEN/CLOSE button and

place a recordable disc on the disc tray.

Press the OPEN/CLOSE button to close the disc tray.

Wait until LOAD disappears from the front panel display.

- Content Protection for Recordable Media (CPRM)

CPRM is a mechanism that ties a recording to the media on

which it is recorded. It is supported by some HDD & DVD

RECORDERs, but not by many DVD players. Each blank

recordable DVD has a unique 64-bit media ID etched in the

BCA. When protected content is recorded onto the disc, it can

be encrypted with a 56-bit C2 (Cryptomeria) cipher derived

from the media ID.

If an unused DVD-RAM disc is used, you will be

prompted to format first. Make your selection using the

œ √ buttons, then press ENTER button. (See page 79)

During playback, the ID is read from the BCA and used to

generate a key to decrypt the contents of the disc. If the

contents of the disc are copied to other media, the ID will be

absent or wrong and the data will not be decryptable.

Unformatted Disc

Do you want to format this disc?

Yes

If an unused DVD-RW disc is used, whether to initialize

or not will be asked first. Make your selection, then press

the ENTER button.(See page 79)

Uninitialized Disc

Do you want to initialize this disc?

Yes

Press the CH (

) or number buttons to select

the current program you want to record.

80 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢀ

You cannot change the recording mode

and the channel while recording.

Press the REC MODE button repeatedly, (or press the

REC MODE button and then press the …† buttons) to

select the recording speed (quality).

NOTE

Recording will stop automatically if there is

no free space left for recording.

SP © LP © EP © XP

Up to 99 titles can be recorded onto a

disc.(DVD-RAM/-RW/-R)

Up to 999 titles can be registered on the

HDD.

Record Mode SP 031:39

HDD recording is available for up to 24

hours, and when recording for 24 hours, 4

titles will be recorded with each being 6

hours in length.

ꢀ

Recording will stop automatically if a copy

protected image is selected.

DVD-RAM/-RW discs must be formatted

before starting to record. Most new discs

are sold unformatted.

Press the REC button.

Information concerning the channel is displayed

on the screen, then recording begins.

Icon( ) is displayed on the front panel.

ꢀ

Do not use DVD-R authoring discs with

this unit.

Recording CH 11 [SAP]

- To pause recording -

• Press the REC PAUSE button to pause a recording

in progress.

• Press the REC PAUSE button again during pause to

resume recording.

• You can switch channels by pressing the

CH (

) buttons while recording pauses.

- To stop recording -

Press the STOP ( ) button to stop or finish a

recording in progress.

•

When using DVD-RAM/-RW/-R discs, the message

“Updating the information of disc. Please wait for a

moment” is displayed.

English - 81

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the REC button

Information concerning the external input mode is

displayed on the screen, then recording begins.

Recording from external

equipment you are watching

Icon( ) is displayed on the front panel.

- To pause recording -

• Press the REC PAUSE button to pause a recording

in progress.

Before you start

Check that the disc has enough available space for the

recording. Adjust the recording mode.

• Press the REC PAUSE button again during pause to

resume recording.

• You can switch channels by pressing the

CH (

) buttons while recording pauses.

Press the HDD or DVD button.

If you select DVD, press the OPEN/CLOSE button and

place a recordable disc on the disc tray. Press the

OPEN/CLOSE button to close the disc tray.

- To stop recording -

Press the STOP ( ) button to stop or finish a

recording in progress.

Wait until LOAD disappears from the front panel display.

If an unused DVD-RAM disc is used, whether to format

or not will be asked first. (See page 79)

If an unused DVD-RW disc is used, whether to initialize

or not will be asked first. (See page 79)

•

When using DVD-RAM/-RW/-R discs, the

message “Updating the information of disc. Please

wait for a moment” is displayed.

Press the INPUT button to select the input source

according to the connection you made.

The front panel display changes in the following

sequence:

CH Number

AV 1

AV 2

If you connect a digital camcorder, press the INPUT

button to select DV. (See page 83)

Press the REC MODE button repeatedly, (or press

the REC MODE button, then press the …† buttons)

to select the recording speed (quality).

Record Mode SP 031:39

82 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the INPUT button to select DV.

If the input is set to DV, a playback/record menu that

enables camcorder control appears on the top of the

screen.

Copying from a Camcorder

The DV device is connected.

You may control the Camcorder using the IEEE1394 (DV)

interface.

MOVE

SELECT

RETURN

Connect the DV output jack of your camcorder to the

DV input jack on the front of your HDD & DVD

Select the Play (√) icon on the upper part of the

screen to playback the camcorder and find the

starting position to copy.

RECORDER using a DV cable.

You can press the PLAY

(

)

button of the remote

control to play the camcorder.

Press the HDD or DVD button.

If you select DVD, press the OPEN/CLOSE button and

place a recordable disc on the disc tray. Press the

OPEN/CLOSE button to close the disc tray. Wait until

LOAD disappears from the front panel display.

To start recording, use the œ √ buttons to select

Record ( G ) icon in the top side of the screen, then

press the ENTER button.

You can press the REC button of the remote control

to start recording. To display playback related icons

on the screen, press any direction button on the

remote control.

Press the REC MODE button repeatedly to select

the recording speed(quality).

SP LP EP XP

- To stop recording -

Press the STOP ( ) button to stop or finish a

recording in progress.

Record Mode SP 031:39

•

When using DVD-RAM/-RW/-R discs, the

message “Updating the information of disc.

Please wait for a moment” is displayed

English - 83

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢀ

The timer counter decreases by the

minute from 8:00 to 0:00, then the HDD &

DVD RECORDER stops recording.

NOTE

Making a One Touch

Recording (OTR)

- To stop recording -

Press the STOP ( ) button. The message “Do you

want to stop recording?” is displayed.

You can set the HDD & DVD RECORDER to record in

30-minute increments up to 8 hours by pressing the REC

button.

This function does not operate when making a Timer

Record in TV Guide mode.

•

Press the œ √ buttons to select Yes, then press the

ENTER button.

•

Or press the STOP (

)

button again.

About INFO button

Press the HDD or DVD button.

During recording, press the INFO button once, the system

information screen appears.: Displays Active Status,

Background Status, and Main Screen information.

If you select DVD, press the OPEN/CLOSE button and

place a recordable disc on the disc tray. Press the

OPEN/CLOSE button to close the disc tray. Wait until

LOAD disappears from the front panel display.

HDD

System Info

Active status

Background Status

Screen

Record XP

– –

If you want to record a TV channel, press the

Recording:CH11 [SAP]

CH (

) buttons or number buttons to select a

JAN/01/2005 (SAT)

AM 12:00

desired channel. If you want to record through a

connected external component, press the INPUT

button to select an appropriate external input (AV 1,

AV 2, DV or CH 01).

Press the REC button to start recording.

Pressing the INFO button twice, Disc information screen

appears.: Displays Total numbers of Titles and Playlists,

Recordable Time(Title), Available Space(Music/Photo).

Recording CH 11 [SAP]

HDD

Total Title

Disc Info

Total Playlist

Recordable Time : Title

17:12 XP

Available Space:Music/Photo 10033 MB

JAN/01/2005 (SAT)

AM 12:00

Press the REC button repeatedly to adjust the

Pressing the INFO button three times: Current recording

information screen appears.: Displays information of recording

Name, Title, Created Time and Recording Time.

desired recording time.

HDD

Name

Recording Info

JAN/01/2005 12:00 AM

OTR Mode

0:30

CH 11

JAN/01/2005 12:00 AM

00:13:27

Recording Title

Created Time

Time

Recording

JAN/01/2005 (SAT)

AM 12:00

84 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the ENTER or PLAY (

)

button.

It plays back the title that you are currently

recording from the beginning.

Chasing Play

√ Play

You can play back from the beginning of the program you

are currently recording.

While Recording

Press the PLAY (

) button.

It plays back the title that you are currently

recording from the beginning.

Playback is not available for 10 seconds from the

start of recording.

- Stopping Playback / Recording -

Press the STOP (

)

button. Playback screen

disappears and the recording in progress screen

appears.

You can use the SKIP (

) and other

playback-related buttons to view the previous

recorded list.

Pressing the STOP ( ) button once more will

stop the recording.

√ Play

ꢀ

No sound is heard during search mode.

ꢀ

DVD disc playback is available during HDD

NOTE

recording. However, JPEG and MP3 files in

the disc cannot be played back.

HDD playback is available during DVD

ꢀ

recording. However, JPEG and MP3 files in

the HDD cannot be played back.

Using the TITLE LIST button

With the unit in recording mode, press the TITLE LIST

button.

The Title List screen is displayed.

Press the …†/SKIP (

)

buttons to select the

recording title list.

Title List

Length

HDD

No.

Title

008 JAN/18/2005 02:15A 00:10:21

009 JAN/19/2005 14:15A 00:40:03

010 JAN/20/2005 16:05A 00:40:15

011 JAN/25/2005 17:00A 00:30:16

012 RECORDING...

00:00:00

RECORDING...

JAN/19/2005 12:15 AM

V-Mode Compatibility

2/2Page

MOVE

SELECT

RETURN

EXIT

ꢀ

This feature is only available in HDD mode.

NOTE

English - 85

Download from Www.Somanuals.com. All Manuals Search And Download.

- Stopping Playback / Recording -

Simultaneous

Recording and Playback

Press the STOP (

)

button. Playback screen

disappears and the recording in progress screen

appears.

Pressing the STOP ( ) button once more will

stop the recording.

You can watching the previous title list while recording a

program.

ꢀ

No sound is heard during search mode.

ꢀ

This function is not available while timer

NOTE

recording is active.

Using the TITLE LIST button

With the unit in recording mode, press the TITLE

LIST button.

The Title List screen is displayed.

Title List

Length

HDD

No.

Title

008 JAN/18/2005 02:15A 00:10:21

009 JAN/19/2005 14:15A 00:40:03

010 JAN/20/2005 16:05A 00:40:15

011 JAN/25/2005 17:00A 00:30:16

012 RECORDING...

00:00:00

JAN/18/2005 12:15 AM CH11

JAN/18/2005 12:15 AM

2/2Page

MOVE

SELECT

RETURN

EXIT

Press the …†/ SKIP (

) buttons to select the

title you want to play, ENTER or PLAY (

)

button.

Selected title list will be played back.

√ Play

86 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Editing

This section introduces basic editing functions

on a Disc/HDD.

• Title List

Title List is a list of previously recorded programs. If a

title is deleted, that title cannot be played again.

• Play List

This refers to a list of user-selected titles. When one

playlist is played,only the scene selected by the user

will play and then stop.

Even if the playlist is deleted, the original recording

will remain. (VR mode only)

Basic Editing (Title List) . . . . . . . . . . . . . . . . . . . . .88

Advanced Editing (Playlist) . . . . . . . . . . . . . . . . . .95

Copying from HDD to DVD . . . . . . . . . . . . . . . . . .103

Copying Multiple Titles at One Time . . . . . . . . . . .106

Copying from DVD to HDD . . . . . . . . . . . . . . . . . .110

Copying MP3 or JPEG Files from a Disc to HDD . .111

Disc Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . .113

Recording or editing might not be completed if an

error, such as a sudden power failure occurs.

Please be aware that a material that has been

damaged is unable to be retrieved to its

original content.

English - 87

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select Rename, then press

the ENTER or √ button.

The Rename screen is displayed.

Basic Editing (Title List)

Rename

HDD

JAN / 1 8 / 2005 12:15 AM CH 11

Renaming(Labeling) a Title

Follow these instructions to rename a title list entry,

i.e., to edit the title of a recorded program.

Back Space

MOVE

Space Delete

SELECT

Clear Save

RETURN EXIT

Using the TITLE LIST button

Select the desired characters using the …† œ √

buttons, press the ENTER button.

With the unit in Stop mode/Playback mode, press the

Rename

TITLE LIST button.

The Title List screen is displayed.

HDD

Sports(A1)

Title List

Length

HDD

No.

Title

001 JAN/18/2005 12:15A 00:10:21

002 JAN/19/2005 12:15A 00:40:03

003 JAN/20/2005 12:15A 00:20:15

004 JAN/25/2005 12:15A 00:50:16

Back Space

MOVE

Space Delete

SELECT

Clear Save

RETURN EXIT

JAN/18/2005 12:15 AM CH11

JAN/18/2005 12:15 AM

1/1 Page

•

Back Space: Deletes and moves the cursor

backwards by one position. (Equivalent to the

CANCEL button)

Space: Enters a blank and moves the cursor one

forward (to the right).

Delete: Deletes the character at the cursor position.

Clear: Deletes all the character inputs.

Save: Registers the character inputs.

MOVE

SELECT

RETURN

EXIT

Using the MENU button.

• With the unit in Stop mode/Playback mode, press

the MENU button.

•

Press the …† buttons to select Title,

then press the ENTER or √ button.

Press the …† œ √ buttons to select Save, and then

press the ENTER button.

The changed title name is displayed on the title item

of the selected entry.

Press the …† buttons to select an entry you want to

rename from the Title List, then press the ANYKEY

button.

Title List

HDD

No.

Title

Length

HDD

Rename

No.

Title

Length

Protection

Copy

001 Sports(A1)

00:10:21

001 JAN/18/2005 12:15A 00:10:21

002 JAN/19/2005 12:15A 00:40:03

003 JAN/20/2005 12:15A 00:20:15

004 JAN/25/2005 12:15A 00:50:16

002 JAN/19/2005 12:15A 00:40:03

003 JAN/20/2005 12:15A 00:20:15

004 JAN/25/2005 12:15A 00:50:16

Delete

Edit

√

Playlist

Sports(A1)

JAN/18/2005 12:15 AM CH11

Navigation

√

JAN/18/2005 12:15 AM

Select Media

Disc Manager

1/1 Page

MOVE

SELECT

RETURN

EXIT

MOVE

SELECT

RETURN

EXIT

88 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Locking (Protecting) a Title

Follow these instructions to lock a title to protect it from

accidental deletion.

Press the …† buttons to select Protection, then press

the ENTER or √ button.

Title List

HDD

Title Protection:

JAN/18/2005 12:15 AM CH11

JAN/18/2005 12:15 AM

Off

Using the TITLE LIST button

MOVE

SELECT

RETURN

EXIT

With the unit in Stop mode/Playback mode, press the

TITLE LIST button .

The Title List screen is displayed.

Press the œ √ buttons to select On, then press the

ENTER button. The key icon on the information

window for the selected entry changes to the locked

Title List

Length

status.

(

➝

)

HDD

No.

Title

001 JAN/18/2005 12:15A 00:10:21

002 JAN/19/2005 12:15A 00:40:03

003 JAN/20/2005 12:15A 00:20:15

004 JAN/25/2005 12:15A 00:50:16

Title List

Length

JAN/18/2005 12:15 AM CH11

JAN/18/2005 12:15 AM

HDD

No.

Title

001 JAN/18/2005 12:15A 00:10:21

002 JAN/19/2005 12:15A 00:40:03

003 JAN/20/2005 12:15A 00:20:15

004 JAN/25/2005 12:15A 00:50:16

1/1 Page

MOVE

SELECT

RETURN

EXIT

JAN/18/2005 12:15 AM CH11

JAN/18/2005 12:15 AM

1/1 Page

Using the MENU button.

MOVE

SELECT

RETURN

EXIT

• With the unit in Stop mode/Playback mode,

press the MENU button.

•

Press the …† buttons to select Title,

then press the ENTER or √ button.

Press the …† buttons to select an entry you want to

protect from the Title List, then press the ANYKEY

button.

Title List

HDD

Rename

No.

Title

Length

Protection

Copy

001 JAN/18/2005 12:15A 00:10:21

002 JAN/19/2005 12:15A 00:40:03

003 JAN/20/2005 12:15A 00:20:15

004 JAN/25/2005 12:15A 00:50:16

Delete

Edit

√

Playlist

JAN/18/2005 12:15 AM CH11

Navigation

√

JAN/18/2005 12:15 AM

Select Media

Disc Manager

1/1 Page

MOVE

SELECT

RETURN

EXIT

English - 89

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select Delete, then press the

ENTER or √ button.

Deleting a Title

Follow these instructions to delete an entry from the

Title List.

Title List

HDD

Do you want to delete?

(Related playlists

may be deleted.)

JAN/18/2005 12:15 AM CH11

JAN/18/2005 12:15 AM

Yes

Using the TITLE LIST button

MOVE

SELECT

RETURN

EXIT

With the unit in Stop mode/Playback mode, press the

TITLE LIST button.

The Title List screen is displayed.

•

The message may be different depending on the type of

disc. You will be prompted with the confirmation

message. HDD, DVD-RAM(VR mode), DVD-

RW(VR mode): If a Playlist is present, the

message “Do you want to delete? (Related

playlists may be deleted.)” is displayed.

DVD-RW(Video mode)/-R: If a playlist is not

present, the message “Do you want to delete?” is

displayed.

Title List

Length

HDD

No.

Title

001 JAN/18/2005 12:15A 00:10:21

002 JAN/19/2005 12:15A 00:40:03

003 JAN/20/2005 12:15A 00:20:15

004 JAN/25/2005 12:15A 00:50:16

JAN/18/2005 12:15 AM CH11

JAN/18/2005 12:15 AM

1/1 Page

MOVE

SELECT

RETURN

EXIT

Press the œ √ buttons to select Yes, then press the

ENTER button.

Using the MENU button.

• With the unit in Stop mode/Playback mode, press

the MENU button.

Title List

HDD

•

Press the …† buttons to select Title,

Deleting...

then press the ENTER or √ button.

(Please wait)

JAN/18/2005 12:15 AM CH11

JAN/18/2005 12:15 AM

Press the …† buttons to select an entry you want to

delete in the Title List, then press the ANYKEY button.

Title List

HDD

Rename

No.

Title

Length

Protection

Copy

001 JAN/18/2005 12:15A 00:10:21

002 JAN/19/2005 12:15A 00:40:03

003 JAN/20/2005 12:15A 00:20:15

004 JAN/25/2005 12:15A 00:50:16

Title List

HDD

No.

Title

Length

Delete

Edit

001 JAN/19/2005 12:15A 00:40:03

003 JAN/20/2005 12:15A 00:20:15

004 JAN/25/2005 12:15A 00:50:16

√

Playlist

JAN/18/2005 12:15 AM CH11

Navigation

√

JAN/18/2005 12:15 AM

Select Media

Disc Manager

1/1 Page

JAN/19/2005 12:15 AM CH11

JAN/19/2005 12:15 AM

MOVE

SELECT

RETURN

EXIT

1/1 Page

MOVE

SELECT

RETURN

EXIT

9 0 -English

Download from Www.Somanuals.com. All Manuals Search And Download.

Splitting a Section of a Title (Split)

You cannot delete a protected entry. If you

want to delete a protected entry, select

“Off” in the Title Protection menu. (See

page 89)

NOTE

Follow these instructions to split a section of a Title

List entry into two titles.

When the Disc Protection has been set to

Protected, you cannot delete titles. (See

page 114)

Once an entry is deleted from the Title List

it cannot be recovered.

Once DVD-RW/-R is finalized, it cannot be

deleted.

Using the TITLE LIST button

With the unit in Stop mode/Playback mode, press the

TITLE LIST button.

The Title List screen is displayed.

Title List

Length

HDD

No.

Title

001 JAN/18/2005 12:15A 00:10:21

002 JAN/19/2005 12:15A 00:40:03

003 JAN/20/2005 12:15A 00:20:15

004 JAN/25/2005 12:15A 00:50:16

JAN/18/2005 12:15 AM CH11

JAN/18/2005 12:15 AM

1/1 Page

MOVE

SELECT

RETURN

EXIT

Using the MENU button.

• With the unit in Stop mode/Playback mode, press

the MENU button.

•

Press the …† buttons to select Title,

then press the ENTER or √ button.

Press the …† buttons to select an entry you want to

Split from the Title List, then press the ANYKEY button.

Title List

HDD

Rename

No.

Title

Length

Protection

Copy

001 JAN/18/2005 12:15A 00:10:21

002 JAN/19/2005 12:15A 00:40:03

003 JAN/20/2005 12:15A 00:20:15

004 JAN/25/2005 12:15A 00:50:16

Delete

Edit

√

Playlist

JAN/18/2005 12:15 AM CH11

Navigation

√

JAN/18/2005 12:15 AM

Select Media

Disc Manager

1/1 Page

MOVE

SELECT

RETURN

EXIT

English - 91

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select Edit, then press the

ENTER or button.

Press the ENTER button to select Split.

The message “This title cannot be recovered after

splitting. Do you want to split?” is displayed.

√

Title List

Length

HDD

No.

Title

Rename

Protection

Copy

Split

001 JAN/18/2005 12:15A 00:10:21

002 JAN/19/2005 12:15A 00:40:03

003 JAN/20/2005 12:15A 00:20:15

HDD

JAN/18/2005 12:15 AM CH11

Title List No. 05

Delete

Edit

004

plit

JAN/25/2005 12:15A 00:50:16

√

Split

Partial Delete

This title cannot be recovered after spliting

Playlist

JAN/18/2005 12:15 AM CH11

Do you want to split?

Navigation

√

JAN/18/2005 12:15 AM

Select Media

Disc Manager

00:05:21

Yes

^00:00:00No

1/1 Page

RETURN

00:05:21

Return

MOVE

SELECT

EXIT

Select

Split

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select Split, then press the

ENTER or

√

button.

Press the

√

buttons to select Yes, then press the

ENTER button.

The split title is divided into two, and the following titles

will be shifted down by one.

Split

HDD

JAN/18/2005 12:15 AM CH11

Title List No. 001

Split

Title List

00:00:00

HDD

No.

Title

Length

00:00:00

Return

001 JAN/18/2005 12:15A 00:05:21

001 JAN/18/2005 12:15A 00:05:00

002 JAN/19/2005 12:15A 00:40:03

003 JAN/20/2005 12:15A 00:20:15

004 JAN/25/2005 12:15A 00:50:16

Select

Split

MOVE

SELECT

RETURN

EXIT

JAN/18/2005 12:15 AM CH11

JAN/18/2005 12:15 AM

1/1 Page

Using the playback-related buttons (PLAY()

SEARCH ( ), move to a point for

splitting and press the ENTER button.

MOVE

SELECT

RETURN

EXIT

)

If it is not the point where you want to split, press the

RETURN button to cancel the selection. Using the

playback-related buttons, move to a point to split and

press the ENTER button.

Split

HDD

JAN/18/2005 12:15 AM CH11

Title List No. 001

Split

00:00:00

00:05:21

Return

➂

➁

Select

Split

MOVE

SELECT

RETURN

EXIT

➁

➂

First split interval

Current playtime

Start time of the second split and its screen

92 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Deleting a Section of a Title (Partial

Delete)

Follow these instructions to delete a section of a

Title List entry.

Press the …† buttons to select Edit, then press the

ENTER or button.

√

Title List

Length

HDD

No.

Title

Rename

Protection

Copy

001 JAN/18/2005 12:15A 00:10:21

002 JAN/19/2005 12:15A 00:40:03

003 JAN/20/2005 12:15A 00:20:15

Delete

Edit

004

plit

JAN/25/2005 12:15A 00:50:16

√

Partial Delete

(VR mode)

Playlist

JAN/18/2005 12:15 AM CH11

Navigation

√

JAN/18/2005 12:15 AM

Select Media

Disc Manager

1/1 Page

RETURN

MOVE

SELECT

EXIT

Using the TITLE LIST button

Press the …† buttons to select Partial Delete, then

With the unit in Stop mode/Playback mode, press the

TITLE LIST button.

The Title List screen is displayed.

press the ENTER or

√

button.

Partial Delete

HDD

JAN/18/2005 12:15 AM CH11

Title List No. 001

Start

End

Title List

Length

HDD

No.

Title

001 JAN/18/2005 12:15A 00:10:21

002 JAN/19/2005 12:15A 00:40:03

003 JAN/20/2005 12:15A 00:20:15

004 JAN/25/2005 12:15A 00:50:16

00:00:00

00:01:00

Return

Start

End

Delete

MOVE

SELECT

RETURN

EXIT

JAN/18/2005 12:15 AM CH11

JAN/18/2005 12:15 AM

1/1 Page

MOVE

SELECT

RETURN

EXIT

Press the ENTER button at the starting point.

The image and starting point time are displayed in the

section deletion starting point window.

Using the MENU button.

• With the unit in Stop mode/Playback mode,

Partial Delete

press the MENU button.

HDD

JAN/18/2005 12:15 AM CH11

Title List No. 001

•

Press the …† buttons to select Title,

Start

End

then press the ENTER or √ button.

00:01:00

00:00:00

00:01:00

Return

Start

End

Delete

Press the …† buttons to select an entry you want to

edit from the Title List, then press the ANYKEY button.

MOVE

SELECT

RETURN

EXIT

Title List

HDD

Rename

No.

Title

Length

Protection

Copy

001 JAN/18/2005 12:15A 00:10:21

002 JAN/19/2005 12:15A 00:40:03

003 JAN/20/2005 12:15A 00:20:15

004 JAN/25/2005 12:15A 00:50:16

Delete

Edit

√

Playlist

JAN/18/2005 12:15 AM CH11

Navigation

√

JAN/18/2005 12:15 AM

Select Media

Disc Manager

1/1 Page

MOVE

SELECT

RETURN

EXIT

• When using a DVD-RAM/-RW(VR) disc, you can

select Partial Delete directly by pressing the

ANYKEY button.

(Then go to step 5)

English - 93

Download from Www.Somanuals.com. All Manuals Search And Download.

Edit Title List Screen Elements

Press the

buttons to select Delete, then press

√

the ENTER button.

Partial Delete

HDD

JAN/18/2005 12:15 AM CH11

Title List No. 001

Partial Delete

Start

End

HDD

JAN/18/2005 12:15 AM CH11

Title List No. 001

Start

End

00:01:00

00:00:00

➃

➁

00:06:35

Return

Start

End

Delete

00:01:00

00:06:35

MOVE

SELECT

RETURN

EXIT

00:06:35

Return

Start

End

Delete

➂

MOVE

SELECT

RETURN

EXIT

Playback bar

Playtime

Section deletion starting point window and time

Section deletion end point window and time

Partial Delete

➁

➂

➃

HDD

JAN/18/2005 12:15 AM CH11

Title List No. 001

Start

Do you want to delete?

(Deleted part will not be restored.)

End

•

Select the start and end points of the section you

want to delete using the playback related buttons.

Playback related buttons :

00:01:00

00:02:00

00:06:35

Return

Yes

•

Start

End

Delete

(PLAY()

SEARCH (

))

MOVE

SELECT

RETURN

EXIT

Press the ENTER button at the end point.

The image and end point time are displayed in the

Section deletion ending point window.

Press the

buttons to select Yes, then press the

√

ENTER button. The selected section has been

deleted.

Partial Delete

HDD

JAN/18/2005 12:15 AM CH11

Title List No. 001

Start

End

Press the

buttons to select Return, then press

√

the ENTER button to finish the operation.

00:01:00

00:06:35

Return

Start

End

Delete

MOVE

SELECT

RETURN

EXIT

The length of the section to be deleted

must be at least 5 seconds long.

NOTE

If the length of the section to be deleted is

less than 5 seconds, you will be prompted

with the message “The range is too

short.”.

If the end time precedes the starting time,

you will be prompted with the message

“End point cannot be marked earlier than

start point”.

The section cannot be deleted when it

includes a still picture.

Press the MENU button after the operation has

finished.

The Title List screen will disappear.

94 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select New Playlist,

then press the ENTER or

√

button.

Advanced Editing

(Playlist)

The Make Playlist screen is displayed.

Make Playlist

HDD

New Playlist

Scene No. 001

Creating a Playlist

Follow these instructions to create a new playlist entry

from a recorded title.

Start

End

Title List 1/9

00:00:00

00:00:10

Return

Start

End

MOVE

Make

SELECT

RETURN

EXIT

(VR mode)

Using the TITLE LIST button

Press the ENTER button at the start point.

Make Playlist

With the unit in Stop mode/Playback mode, press the

TITLE LIST button.

The Title List screen is displayed.

HDD

New Playlist

Scene No. 001

Start

End

Title List 1/9

00:00:10

00:00:00

Title List

00:00:10

Return

HDD

No.

Title

Length

Start

End

MOVE

Make

001 JAN/18/2005 12:15A 00:10:21

002 JAN/19/2005 12:15A 00:40:03

003 JAN/20/2005 12:15A 00:20:15

004 JAN/25/2005 12:15A 00:50:16

SELECT

RETURN

EXIT

JAN/18/2005 12:15 AM CH11

JAN/18/2005 12:15 AM

•

The image and time at the start point are displayed on

the Start window.

The yellow-colored selection bar moves to the End

item.

Select the starting point of the section from which you

want to create a new scene using the playback

1/1 Page

MOVE

SELECT

RETURN

EXIT

Using the MENU button.

related buttons (PLAY( ) SEARCH (

)).

• With the unit in Stop mode/Playback mode,

press the MENU button.

•

Press the …† buttons to select Title,

Press the ENTER button at the end point.

then press the ENTER or √ button.

Make Playlist

Press the ANYKEY button.

Press the …† buttons to select Playlist, then

HDD

New Playlist

Scene No. 001

Start

End

press the ENTER or

√

button.

Title List 1/9

00:00:10

00:10:10

Return

Title List

Length

Start

End

MOVE

Make

HDD

No.

Title

Rename

Protection

Copy

001 JAN/18/2005 12:15A 00:10:21

002 JAN/19/2005 12:15A 00:40:03

003 JAN/20/2005 12:15A 00:20:15

004 JAN/25/2005 12:15A 00:50:16

SELECT

RETURN

EXIT

Delete

Edit

√

Playlist

New Playlist

JAN/18/2005 12:15 AM CH11

Navigation_12:15

√

Go To Playlist

JAN/18/2005

•

The image and end point time are displayed in the

End window.

The yellow-colored selection bar moves to the

Make item.

Select Media

^SPDisc Manager

1/1 Page

MOVE

SELECT

RETURN

EXIT

English - 95

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing Entries in the Playlist

Follow these instructions to play the playlist entries.

Press the œ √ buttons to select Make,

then press the ENTER button.

•

To make a scene the playlist.

A new Make scene screen is displayed.

Repeat steps 3~6 to make a new scene for the playlist.

A new scene will be added to the current playlist.

You can check and see all the scenes on the Edit

playlist screen. (See page 98)

(VR mode)

Using the PLAY LIST button

•

To make a new playlist.

Repeat steps 1~6 if you want to make a new playlist.

With the unit in Stop mode/Playback mode, press the

PLAY LIST button.

The Playlist screen is displayed.

Press the œ √ button to select Return,

then press the ENTER button to finish the operation.

Playlist

HDD

No.

Title

Length

001 JAN/16/2005 12:15A 00:10:21

002 JAN/19/2005 12:15A 00:40:03

003 JAN/22/2005 12:15A 00:20:15

004 JAN/25/2005 12:15A 00:50:16

ꢀ

You can create up to 99 playlist entries.

JAN/16/2005 12:15 AM CH11

JAN/16/2005 12:15 AM

ꢀ

NOTE

Depending on the kind of disc, the

displayed screen may have a slight

difference.

Scenes

1/1 Page

MOVE

SELECT

RETURN

EXIT

ꢀ

Pressing the SKIP button will skip to the

next title.

Using the MENU button.

• With the unit in Stop mode/Playback mode,

press the MENU button.

•

Press the …† buttons to select Title,

then press the ENTER or √ button.

The Title List screen is displayed.

• Press the ANYKEY button.

• Press the …† buttons to select Playlist, then press

the ENTER or √ button.

• Press the …† buttons to select Go To Playlist,

then press the ENTER or √ button.

Press the …† buttons to select the playlist you

want to play, then press the ENTER or PLAY (

button.

)

Press the STOP ( ) button to stop playing.

The screen returns to the Playlist screen.

96 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Renaming a Playlist Entry

Follow these instructions to rename a playlist entry, i.e.

to edit the title of a playlist entry.

Press the …† buttons to select Rename, then press

the ENTER or √ button.

The Rename screen is displayed.

Rename

(VR mode)

HDD

1 8 / JAN / 2005 12:15 AM

Using the PLAY LIST button

Back Space

MOVE

Space Delete

SELECT

Clear Save

RETURN EXIT

With the unit in Stop mode/Playback mode, press the

PLAY LIST button.

The Edit Playlist screen is displayed.

Select the desired characters using the …† œ √

buttons, then press the ENTER button.

Playlist

HDD

No.

Title

Length

001 JAN/16/2005 12:15A 00:10:21

002 JAN/19/2005 12:15A 00:40:03

003 JAN/22/2005 12:15A 00:20:15

004 JAN/25/2005 12:15A 00:50:16

Rename

HDD

JAN/16/2005 12:15 AM CH11

JAN/16/2005 12:15 AM

Dolphin

Scenes

1/1 Page

MOVE

SELECT

RETURN

EXIT

Back Space

MOVE

Space Delete

SELECT

Clear Save

RETURN EXIT

Using the MENU button.

• With the unit in Stop mode/Playback mode,

press the MENU button.

•

This function is the same as the Rename function in

Renaming the Title. (See page 88)

The maximum number of characters that can be

entered is 31. All 31 characters can be displayed

by pressing the INFO button.

•

Press the …† buttons to select Title,

then press the ENTER or √ button.

The Title List screen is displayed.

• Press the ANYKEY button.

• Press the …† buttons to select Playlist, then press

the ENTER or √ button.

Press the …† œ √ buttons to select Save, then press

the ENTER button.

The changed title is displayed in the title field of the

selected playlist entry.

• Press the …† buttons to select Go To Playlist,

then press the ENTER or √ button.

Press the …† buttons to select the title you want to

Rename from the Playlist, then press the ANYKEY

button.

ANYKEY menu is displayed : Rename, Copy, Delete,

Edit Playlist, Go To Titlelist, Disc Manager

Playlist

HDD

No.

Title

Length

001 Dolphin

00:10:21

002 JAN/19/2005 12:15A 00:40:03

003 JAN/22/2005 12:15A 00:20:15

004 JAN/25/2005 12:15A 00:50:16

Dolphin

16/JAN/2005 12:15

Scenes

Playlist

1/1 Page

HDD

No.

Title

Length

MOVE

SELECT

RETURN

EXIT

001 JAN/16/2005 12:15A 00:10:21

002 JAN/19/2005 12:15A 00:40:03

003 JAN/22/2005 12:15A 00:20:15

004 JAN/25/2005 12:15A 00:50:16

Rename

Copy

Delete

JAN/16/2005 12:15 AM CH11

Edit Playlist

JAN/16/2005

Go To Tit¹l²e^:l¹i⁵s^At^M

D^Sis^cec^neM^sanager

1/1 Page

MOVE

SELECT

RETURN

EXIT

English - 97

Download from Www.Somanuals.com. All Manuals Search And Download.

Editing a Scene for the Playlist

Press the …† buttons to select Edit Playlist,

then press the ENTER or √ button.

The Edit Playlist Scene screen is displayed.

Follow these instructions to edit scenes for a playlist.

(VR mode)

Edit Playlist

HDD

00:00:26

0:00:26

Playlist No. 1

0:00:03

Using the PLAY LIST button

020:00:07

00:06:04

00:01:07

1/1 Page

SELECT

Return

With the unit in Stop mode/Playback mode, press the

PLAY LIST button.

The Edit Playlist screen is displayed.

MOVE

RETURN

EXIT

Playlist

HDD

No.

Title

Length

001 JAN/16/2005 12:15A 00:10:21

002 JAN/19/2005 12:15A 00:40:03

003 JAN/22/2005 12:15A 00:20:15

004 JAN/25/2005 12:15A 00:50:16

Playing a Selected Scene

JAN/16/2005 12:15 AM CH11

JAN/16/2005 12:15 AM

Press the …†œ √ buttons to select the scene you

want to play, then press the ANYKEY button.

The playlist entry to be played is selected.

Scenes

1/1 Page

MOVE

SELECT

RETURN

EXIT

Edit Playlist

Using the MENU button.

HDD

Playlist No. 1

0:00:03

• With the unit in Stop mode/Playback mode,

press the MENU button.

0:00:26

020:00:07

00:06:04

Play

Modify

Move

•

Press the …† buttons to select Title,

Add

0:00:26

00:01:07

then press the ENTER or √ button.

The Title List screen is displayed.

Press the ANYKEY button.

Press the …† buttons to select Playlist, then press

the ENTER or √ button.

Delete

1/1 Page

SELECT

Return

MOVE

RETURN

EXIT

•

Press the …† buttons to select Go To Playlist,

then press the ENTER or √ button.

Press the …† buttons to select Play, then press the

ENTER or √ button.

The selected scene is played.

Press the …† buttons to select the title you want to

edit from the Playlist, then press the ANYKEY button.

The Edit Playlist menu is displayed: Rename, Copy,

Delete, Edit Playlist, Go To Titlelist, Disc Manager.

√

PLAY

Playlist

HDD

No.

Title

Length

001 JAN/16/2005 12:15A 00:10:21

002 JAN/19/2005 12:15A 00:40:03

003 JAN/22/2005 12:15A 00:20:15

004 JAN/25/2005 12:15A 00:50:16

Rename

Copy

Delete

JAN/16/2005 12:15 AM CH11

Edit Playlist

•

To stop scene play, press the STOP ( ) button.

JAN/16/2005

Go To Tit¹l²e^:l¹i⁵s^At^M

D^Sis^cec^neM^sanager

1/1 Page

MOVE

SELECT

RETURN

EXIT

98 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Modifying a Scene (Replacing a Scene)

Press the ENTER button at the end point of the scene.

To setup, follow steps 1 to 3 on page 98.

Modify Scene

HDD

New Playlist

Scene No. 001

Press the …† œ √ buttons to select the scene you

Start

End

want to modify, then press the ANYKEY button.

00:00:20

00:00:30

Title List : 1/7

00:00:30

Cancel

Edit Playlist

Start

End

Change

HDD

Playlist No. 1

MOVE

SELECT

RETURN

EXIT

0:00:26

020:00:07

00:06:04

0:00:03

Play

Modify

Move

•

The image and ending point time are displayed in the

End window.

Add

0:00:26

00:01:07

Delete

1/1 Page

SELECT

Return

MOVE

RETURN

EXIT

Press the œ √ buttons to select Change, then press

the ENTER button.

Press the …† buttons to select Modify, then press the

ENTER or √ button.

The Modify Scene screen is displayed.

Edit Playlist

HDD

Playlist No. 1

0:00:26

020:00:07

00:00:04

0:00:03

Modify Scene

HDD

New Playlist

Scene No. 001

0:00:26

00:01:07

1/1 Page

SELECT

Return

Start

End

MOVE

RETURN

EXIT

00:00:00

Title List : 1/7

00:00:20

Cancel

• The scene you want to modify is changed with

the selected section.

Start

End

Change

MOVE

SELECT

RETURN

EXIT

• The yellow-colored selection bar moves to the

Change item.

Press the ENTER button at the start point of the scene.

Modify Scene

HDD

New Playlist

Scene No. 001

Start

End

00:00:20

00:00:00

Title List : 1/7

00:00:20

Cancel

Start

End

Change

MOVE

SELECT

RETURN

EXIT

•

The image and starting point time are

displayed on the Start window.

Select the starting or ending point of the

section you want to modify using the playback

related buttons (PLAY( ) SEARCH (

)).

English - 99

Download from Www.Somanuals.com. All Manuals Search And Download.

Moving a Scene (Changing the Position of a Scene)

Press the …† œ √ buttons to select the position

to which you want to move the selected scene,

then select the ENTER button.

To setup, follow steps 1 to 3 on page 98.

Edit Playlist

HDD

00:00:26

Playlist No. 1

Press the …† œ √ buttons to select the scene you

want to move (change the position), then press the

ANYKEY button.

00:00:07

00:00:04

00:00:03

Edit Playlist

1/1 Page

SELECT

Cancel

EXIT

HDD

Playlist No. 1

MOVE

RETURN

0:00:26

0:00:07

00:06:04

0:00:03

Play

Modify

Move

•

The selected scene is moved to the selected

position.

Add

0:00:26

00:01:07

Delete

1/1 Page

SELECT

Return

MOVE

RETURN

EXIT

Edit Playlist

HDD

00:01:07

00:00:26

Playlist No. 1

00:00:07

00:00:26

00:00:04

00:00:03

Press the …† buttons to select Move, then press the

ENTER or √ button.

1/1 Page

SELECT

Return

MOVE

RETURN

EXIT

Edit Playlist

HDD

00:00:26

Playlist No. 1

00:00:07

00:01:07

00:00:04

00:00:03

Depending on the disc type, the displayed

screen may appear slightly different.

NOTE

1/1 Page

SELECT

Cancel

MOVE

RETURN

EXIT

•

A yellow selection window is displayed on the

scene to be moved.

100 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the ENTER button at the end point of the scene.

Adding a Scene

Add Scene

HDD

JAN/16/2005 12:15AM

Scene No. 001

To setup, follow steps 1 to 3 on page 98.

Start

End

Press the …† œ √ buttons to select the scene that

00:00:15

00:00:35

will have a new scene inserted before it, then press

the ANYKEY button.

Title List : 1/7

00:00:35

Cancel

Start

End

MOVE

Add

SELECT

RETURN

EXIT

Edit Playlist

HDD

Playlist No. 1

•

The image and end point time are displayed in

the End window.

To cancel, press the œ √ buttons to select Cancel,

then press the ENTER button.

0:00:26

020:00:07

00:00:04

0:00:03

Play

Modify

Move

Add

0:00:26

0200:00:07

MOVE

Delete

1/1 Page

SELECT

Return

RETURN

EXIT

Press the œ √ buttons to select Add, then press the

ENTER button.

Press the …† buttons to select Add, then press the

ENTER or √ button.

The Add Scene screen is displayed.

Edit Playlist

HDD

Playlist No. 1

00:00:26

0200:00:07

00:00:04

00:00:03

Add Scene

HDD

JAN/16/2005 12:15AM

Scene No. 001

0200:00:07

MOVE

020:107:02

1/1 Page

Return

Start

End

SELECT

RETURN

EXIT

00:00:00

Title List : 1/7

00:00:00

Cancel

Start

End

MOVE

Add

•

The section you want to add is inserted prior to the

scene selected in step 4.

SELECT

RETURN

EXIT

Press the ENTER button at the starting point of the

scene.

Add Scene

HDD

JAN/16/2005 12:15AM

Scene No. 001

Start

End

00:00:15

00:00:00

Title List : 1/7

00:00:15

Cancel

Start

End

MOVE

Add

SELECT

RETURN

EXIT

•

The image and starting point time are displayed

on the Start window.

Select the starting or ending point of the

section you want to modify using the playback

related buttons (PLAY( ) SKIP (

)).

English - 101

Download from Www.Somanuals.com. All Manuals Search And Download.

Deleting a Scene

Deleting a Playlist Entry from the

Playlist

To setup, follow steps 1 to 3 on page 98.

Using the PLAY LIST button

Press the …† œ √ buttons to select the scene you

want to delete, then press the ANYKEY button.

With the unit in Stop mode/Playback mode, press the

PLAY LIST button.

The Edit Playlist screen is displayed.

Edit Playlist

HDD

Playlist No. 1

0:00:03

0:00:26

Play

020:00:07

00:06:04

Playlist

Modify

Move

HDD

No.

Title

Length

001 JAN/16/2005 12:15A 00:10:21

002 JAN/19/2005 12:15A 00:40:03

003 JAN/22/2005 12:15A 00:20:15

004 JAN/25/2005 12:15A 00:50:16

Add

0:00:26

00:01:07

Delete

1/1 Page

SELECT

Return

MOVE

RETURN

EXIT

JAN/16/2005 12:15 AM CH11

JAN/16/2005 12:15 AM

Scenes

1/1 Page

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select Delete, then press

the ENTER or √ button.

Using the MENU button.

Edit Playlist

• With the unit in Stop mode/Playback mode,

HDD

Playlist No. 1

press the MENU button.

•

Press the …† buttons to select Title,

then press the ENTER or √ button.

The Title List screen is displayed.

_0:00:26Do you want to delete the sce₀n₄e ?

020:00:07

00:06:04

0:00:03

Yes

0:00:26

00:01:07

1/1 Page

SELECT

• Press the ANYKEY button.

Return

MOVE

RETURN

EXIT

• Press the …† buttons to select Playlist, then press

the ENTER or √ button.

•

The message “Do you want to delete the scene ?” is

displayed.

• Press the …† buttons to select Go To Playlist,

then press the ENTER or √ button.

Press the œ √ buttons to select Yes,

then press the ENTER to delete the selected scene.

Press the …† buttons to select the title you want to

edit from the Playlist, then press the ANYKEY button.

The Edit Playlist menu is displayed:Rename, Copy,

Delete, Edit Playlist, Go To Titlelist, Disc Manager.

Playlist

HDD

No.

Title

Length

001 JAN/16/2005 12:15A 00:10:21

002 JAN/19/2005 12:15A 00:40:03

003 JAN/22/2005 12:15A 00:20:15

004 JAN/25/2005 12:15A 00:50:16

Rename

Copy

_JD_ANe_/1le_6/t₂e₀₀₅

12:15

CH11

Edit Playlist ^AM

^JG^ANo^/16t^/o²⁰T⁰⁵itlelist

Scenes

⁷Disc Manager

12:15 AM

1/1 Page

MOVE

SELECT

RETURN

EXIT

102- English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select Delete, then press

the ENTER or √ button.

Copying from HDD to

DVD

•

You will be prompted with the delete confirmation

message “Do you want to delete?”.

Playlist

HDD

About the Copy Screen

Do you want to delete?

Copy

HDD

Copy To : HDD

ꢀ

DVD

JAN/16/2005 12:15 AM CH11

JAN/16/2005 12:15 AM

Yes

No.

Title

JAN/01/2005 20:25A

Add to list

Rec.Mode

Length

Scenes

SP ꢀ HS

00:01:40

Start

Rec. Mode

MOVE

SELECT

RETURN

EXIT

[DVD] Available

02:00:32

4.48 GB

Total

00:01:40

0.05 GB

MOVE

SELECT

RETURN

EXIT

Press the œ √ buttons to select Yes, then press the

ENTER button.

You will be automatically returned to the Playlist screen

after the delete operation has finished.

Title to be copied

Add titles to be copied (up to 7 titles can be copied at one time)

Recording mode for copying

- HS(high speed): you can copy more quickly than

normal playback speed.

For example, a one hour recording will be dubbed

from the HDD to a DVD-RAM at the following times:

Playlist

HDD

Rec. Speed

XP ꢀ HS

SP ꢀ HS

LP ꢀ HS

EP ꢀ HS

Time

About 32 min.

About 18 min.

About 10 min.

About 8 min.

Deleting...

(Please wait)

JAN/16/2005 12:15 AM CH11

JAN/16/2005 12:15 AM

Scenes

❋

Note : The dubbing times are approximate and

depend on the disc and data conditions.

XP/SP/LP/EP

- You can select the recording quality you want to dub to.

Playlist

Length

HDD

No.

Title

001 JAN/19/2005 12:15A 00:40:03

002 JAN/22/2005 12:15A 00:20:15

003 JAN/25/2005 12:15A 00:50:16

❋

You cannot dub a lower quality mode (i.e. EP) to

a higher quality mode(i.e. XP)

Record time of title to be copied

Copy start button

Record mode setup button

Remaining time and space on the current disc in

DVD Record mode

JAN/19/2005 12:15 AM CH11

JAN/19/2005 12:15 AM

Scenes

1/1 Page

MOVE

SELECT

RETURN

EXIT

Total record time and space of selected titles for copying

Contents Copy Specifications

Contents

Recorded Video Title

Copy Protected Title

HDD ꢀ DVD

Supported

Not supported

Move

Copy Once Title

(Deletes the Title in the HDD after copying)

Once a “Copy Once program” has been recorded on a DVD disc,

the disc cannot be copied to the HDD again.

However, if “Copy Once program” has been recorded on the HDD

the title can be copied to DVD-RW(VR mode) or DVD-RAM.

ꢁ

Please be aware that Copy Protection may affect

the number of times you can make a copy.

NOTE

English - 103

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the ANYKEY button.

Using the TITLE LIST button

Title List

Length

HDD

No.

Title

Rename

Protection

Copy

001 JAN/18/2005 12:15A 00:10:21

002 JAN/19/2005 12:15A 00:40:03

003 JAN/20/2005 12:15A 00:20:15

004 JAN/25/2005 12:15A 00:50:16

Press the OPEN/CLOSE button and place a

recordable disc on the disc tray.

Delete

Edit

√

Playlist

JAN/18/2005 12:15 AM CH11

Navigation_12:15

√

JAN/18/2005

Press the OPEN/CLOSE button to close the disc

tray. Wait until LOAD disappears from the front panel

display. Check that the disc has enough available

space for the recording.

Select Media

^SPDisc Manager

1/1 Page

MOVE

SELECT

RETURN

EXIT

Select the HDD by pressing the HDD button on the

front panel of the HDD & DVD RECORDER or on the

remote control.

Press the …† buttons to select Copy, then press the

ENTER or √ button.

The Copy screen is displayed.

With the unit in Stop mode/Playback mode, press the

TITLE LIST button.

The Title List screen is displayed.

Copy

HDD

Copy To : HDD

ꢀ

DVD

No.

Title

JAN/18/2005 12:15A

Add to list

Rec.Mode

Length

LP ꢀ HS

00:10:21

Start

Rec. Mode

Title List

[DVD] Available

HDD

No.

Title

Length

04:00:16

4.48 GB

Total

00:10:21

001 JAN/18/2005 12:15A 00:10:21

002 JAN/19/2005 12:15A 00:40:03

003 JAN/20/2005 12:15A 00:20:15

004 JAN/25/2005 12:15A 00:50:16

0.25 GB

MOVE

SELECT

RETURN

EXIT

JAN/18/2005 12:15 AM CH11

JAN/18/2005 12:15 AM

1/1 Page

MOVE

SELECT

RETURN

EXIT

• If you want to change the record mode (select a

different recording quality from the original) when

copying, see page 106.

Using the MENU button.

• With the unit in Stop mode/Playback mode,

press the MENU button.

Press the ENTER or √ button to select Start,

• Press the …† buttons to select Title,

then press the ENTER or √ button.

The Title List screen is displayed.

then press the ENTER button.

Copy

HDD

Copy To : HDD

ꢀ

DVD

Press the …† buttons to select the title you want to

copy.

No.

Title

JAN/18/2005 12:15A

Add to list

Rec.Mode

Length

LP ꢀ HS

00:10:21

Start

Rec. Mode

[DVD] Available

To moveto other pages, press the SKIP(

buttons.

)

04:00:16

4.48 GB

Total

00:10:21

SKIP( ) : previous page of title list

0.25 GB

MOVE

SELECT

RETURN

EXIT

SKIP( ) : next page of title list

- About Using COPY button -

Press the …† buttons to select title you want to

copy from the title list and then press the COPY

button on the remote control. You can go to the

copy screen.

• During Playback, you can also copy the title by

pressing the COPY button.

104 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢁ

High speed copy : This means that you

can transfer without having to worry about

the quality getting worse with each copy

‘generation’. It also means that copying

can be carried out at the maximum speed

possible.

Copying a Title that has been edited

once before -

NOTE

The “Do you want to view screen of copying title?”

message is displayed.

Copy

DVD

HDD

Copy To : HDD

ꢀ

No.

Title

Rec.Mode

LP HS

Length

JAN/18/2005 12:15A

Do you want to view screen of copying title?

ꢀ

00:10:21

Start

-1 Tobeginhighspeedcopy, pressthe œ √ buttons to

select Yes, then press the ENTER button.

High speed copy begins. The title to be copied is not

played back, while the currently broadcasting

program is displayed on the screen.

Add

list

Rec. Mode

[DVD] Available

04: 08:47

Yes

Total

04: 08:47

MOVE

SELECT

RETURN

EXIT

Tocopyatitlewhileviewingthetitleonthecopy

screen, press the œ √ buttons to select Yes, then

press the ENTER button.

HDD

DVD

If you want to stop copy, press CANCEL key.

HDD

DVD

•

If No is selected, the title to be copied is displayed at

If you want to stop copy, press CANCEL key.

its playback speed while copying.

•To cancel the copying in progress, press the

•

If No is selected, the title to be copied is not displayed

on the screen, and copying begins while the currently

broadcasting program is displayed on the screen.

CANCEL button.

•To cancel the copying in progress, press the

-1 After a successful copy, “The title is successfully

CANCEL button.

copied” message is displayed.

Copying an Unedited title

-1 The “Do you want to use high speed copy mode?”

The title is successfully copied.

message is displayed.

Copy

HDD

Copy To : HDD

ꢀ

DVD

No.

Title

JAN/18/2005 12:15A

Rec.Mode

LP HS

Length

ꢀ

00:10:21

Start

Do you want to use high speed copy mode?

Add

list

Rec. Mode

[DVD] Available

04: 08:47

Yes

Total

04: 08:47

MOVE

SELECT

RETURN

EXIT

English - 105

Download from Www.Somanuals.com. All Manuals Search And Download.

Changing the Record Mode

Copying Multiple Titles

at One Time

To setup, follow steps 1 to 7 on page 104.

Press the

√

and

†

buttons to select Rec. Mode, then

press the ENTER button.

Using the TITLE LIST button

Copy

DVD

HDD

Copy To : HDD

ꢁ

No.

Title

JAN/18/2005 12:15A

Add to list

Rec.Mode

Length

LP ꢁ HS

00:10:21

Start

Rec. Mode

[DVD] Available

Press the OPEN/CLOSE button and place a

recordable disc on the disc tray.

04: 08:47

Total

High Speed

04: 08:47

MOVE

SELECT

RETURN

EXIT

Press the OPEN/CLOSE button to close the disc

tray. Wait until LOAD disappears from the front panel

display. Check that the disc has enough available

space for the recording.

Press the …† buttons to select record mode you want

to record, then press the ENTER button.

Select the HDD by pressing the HDD button on the

front panel of the HDD & DVD RECORDER or on the

remote control.

•

HS(High Speed) : Copies in the same record mode as

HDD.

• XP/SP/LP/EP : You cannot copy at a higher

quality mode than original. If the same record

mode is selected, the title is copied at high speed.

With the unit in Stop mode/Playback mode, press the

TITLE LIST button.

The Title List screen is displayed.

Title List

ꢀ

Using the same method, you can copy a

HDD

No.

Title

Length

Playlist.

001 JAN/18/2005 12:15A 00:10:21

002 JAN/19/2005 12:15A 00:40:03

003 JAN/20/2005 12:15A 00:20:15

004 JAN/25/2005 12:15A 00:50:16

NOTE

ꢀ

High speed copying is not available for a title

list that has been partially deleted.

During copying, timer recording is not

available.

JAN/18/2005 12:15 AM CH11

JAN/18/2005 12:15 AM

ꢀ

1/1 Page

MOVE

SELECT

RETURN

EXIT

ꢀ

High speed copying is not available when:

Copying a title that can only be copied once

- Copying a playlist

- Copying a partially-deleted title

Using the MENU button.

ꢀ

• With the unit in Stop mode/Playback mode,

press the MENU button.

Regarding title lists that can be copied only

once:

Only available for DVD discs that support

CPRM.

If a playlist contains a scene that can only be

copied once, it cannot be copied.

• Press the …† buttons to select Title,

then press the ENTER or √ button.

The Title List screen is displayed.

ꢀ

You cannot dub a lower quality mode (i.e.

EP) to a higher quality mode(i.e. XP).

Press the …† buttons to select one of the titles you

want to copy.

To move to other pages, press the SKIP (

buttons.

)

SKIP( ) : previous page of title list

SKIP( ) : next page of title list

106 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

ress the ANYKEY button.

Press the …† buttons to select Add, then press the

ENTER button.

The Add Copy List screen is displayed.

Press the …† buttons to select the title you want to

copy, then press the ENTER button.

Title List

Length

HDD

Rename

No.

Title

Protection

Copy

001 JAN/18/2005 12:15A 00:10:21

002 JAN/19/2005 12:15A 00:40:03

003 JAN/20/2005 12:15A 00:20:15

004 JAN/25/2005 12:15A 00:50:16

Delete

Edit

Other method: Press the …† buttons to select Add a

list, then press the ENTER button.

√

Playlist

JAN/18/2005 12:15 AM CH11

Navigation_12:15

√

JAN/18/2005

Select Media

Press the …† buttons to select a title you want to copy,

then press the ENTER button.

^SPDisc Manager

1/1 Page

MOVE

SELECT

RETURN

EXIT

Add Copy List

HDD

No.

Title

Length

001 JAN/18/2005 12:15A 00:10:21

002 JAN/19/2005 12:15A 00:40:03

003 JAN/20/2005 12:15A 00:20:15

004 JAN/25/2005 12:15A 00:50:16

Press the …† buttons to select Copy, then press the

ENTER or √ button.

The Copy screen is displayed.

JAN/18/2005 12:15 AM CH11

JAN/18/2005 12:15 AM

1/1 Page

MOVE

SELECT

RETURN

EXIT

Copy

HDD

Copy To : HDD

ꢁ

DVD

No.

Title

JAN/18/2005 12:15A

Add to list

Rec.Mode

Length

LP ꢁ HS

00:10:21

Start

Rec. Mode

Repeat steps 8~9 to select an additional title you want

to copy

[DVD] Available

04:00:16

4.48 GB

Total

00:10:21

0.25 GB

Copy

DVD

MOVE

SELECT

RETURN

EXIT

HDD

Copy To : HDD

ꢁ

No.

Title

Rec.Mode

Length

JAN/18/2005 12:15A

JAN/19/2005 13:15A

JAN/20/2005 15:15A

ꢁ

00:10:21

00:15:21

00:30:21

Start

Rec. Mode

[DVD] Available

Add to list

04:00:16

Press the ANYKEY button.

4.48 GB

Total

00:56:03

1.88 GB

MOVE

SELECT

RETURN

EXIT

Copy

DVD

HDD

Copy To : HDD

ꢁ

No.

Title

JAN/18/2005 12:15A

Add to list

Rec.Mode

Length

LP ꢁ HS

00:10:21

Start

Press the ENTER or √ buttons to select Start,

Rec. Mode

[DVD] Available

Add

then press the ENTER button.

04:00:16

Delete

4.48 GB

Total

00:10:21

Preview

Rec. Mode

√

0.25 GB

Copy

MOVE

SELECT

RETURN

EXIT

HDD

Copy To : HDD

ꢁ

DVD

No.

Title

Rec.Mode

Length

JAN/18/2005 12:15A

JAN/19/2005 13:15A

JAN/20/2005 15:15A

ꢁ

00:10:21

00:15:21

00:30:21

Start

Rec. Mode

[DVD] Available

Add to list

04:00:16

4.48 GB

Total

00:56:03

1.88 GB

MOVE

SELECT

RETURN

EXIT

The added title lists are copied into the copy list.

To cancel the copying in progress, press the CANCEL

button.

ꢀ

If copy list contains at least one title that

cannot be copied at high speed, it performs

step 9 described on page105.

Otherwise, it performs the step 9^-1described

on page 105.

NOTE

English - 107

Download from Www.Somanuals.com. All Manuals Search And Download.

Deleting an Undesired Title from the

Copy List

Previewing a Selected Title from the

Copy List

To setup, follow steps 1 to 7 on pages 105~106.

Press the …† buttons to select a title you want to

delete from the copy screen.

preview in the copy screen.

Copy

DVD

Copy

DVD

HDD

Copy To : HDD

ꢁ

HDD

Copy To : HDD

ꢁ

No.

Title

Rec.Mode

Length

No.

Title

Rec.Mode

Length

JAN/18/2005 12:15A

JAN/19/2005 13:15A

JAN/20/2005 15:15A

ꢁ

00:10:21

00:15:21

00:30:21

Start

JAN/18/2005 12:15A

JAN/19/2005 13:15A

JAN/20/2005 15:15A

ꢁ

00:10:21

00:15:21

00:30:21

Start

Rec. Mode

[DVD] Available

Add to list

04:00:16

4.48 GB

Total

00:56:03

4.48 GB

Total

00:56:03

1.88 GB

MOVE

SELECT

RETURN

EXIT

MOVE

SELECT

RETURN

EXIT

Press the ANYKEY button. Press the …† buttons to

select Delete, then press the ENTER or √ button.

The message “Do you want to delete?” is displayed.

Press the ANYKEY button. Press the …† buttons to

select Preview, then press the ENTER or √ button.

You can preview the selected title through the display

window located at the center of the screen.

Copy

HDD

Copy To : HDD

ꢁ

DVD

Copy

No.

Title

JAN/18/2005 12:15A

Rec.Mode

LP HS

Length

HDD

Copy To : HDD

ꢁ

DVD

ꢁ

00:10:21

Start

Rec. Mode

[DVD] Available

Do you want to delete?

JAN/19/2005 13:15A

JAN/20/2005 15:15A

Add

ꢁ

00:15:21

00:30:21

No.

Title

Rec.Mode

Length

JAN/18/2005 12:15A

JAN/19/2005 13:15A

JAN/20/2005 15:15A

Add

ꢁ

00:10:21

00:15:21

00:30:21

Start

list

04:00:16

Rec. Mode

[DVD] Available

4.48 GB

Total

01:06:03

Yes

list

04:00:16

1.88 GB

4.48 GB

Total

00:56:03

MOVE

SELECT

RETURN

EXIT

1.88 GB

SELECT

RETURN

EXIT

Press the œ √ buttons to select Yes, then press the

ENTER button.

Press the RETURN button to exit the Preview mode.

The selected title is deleted.

Copy

HDD

Copy To : HDD

ꢁ

DVD

No.

Title

Rec.Mode

Length

JAN/19/2005 13:15A

JAN/20/2005 15:15A

ꢁ

00:15:21

00:30:21

Start

Rec. Mode

[DVD] Available

Add to list

04:00:16

4.48 GB

Total

00:45:42

1.30 GB

MOVE

SELECT

RETURN

EXIT

108 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Selecting Record Mode of Each

Title from the Copy List

Changing Record Mode of All Titles

from the Copy List

You can copy multiple titles while setting different record

You can copy multiple titles while setting the same record

modes for each title.

mode for all titles.

To setup, follow steps 1 to 7 on pages 106~107.

Press the …† buttons to select a title to change its

Select the Rec. Mode on the right-hand side on the

record mode in the copy screen.

screen using the …†œ √ buttons, then press the

ENTER button.

Copy

DVD

Copy

HDD

Copy To : HDD

ꢁ

HDD

Copy To : HDD

ꢁ

DVD

No.

Title

Rec.Mode

Length

No.

Title

Rec.Mode

Length

JAN/18/2005 12:15A

JAN/19/2005 13:15A

JAN/20/2005 15:15A

ꢁ

00:10:21

00:15:21

00:30:21

Start

JAN/18/2005 12:15A

JAN/19/2005 13:15A

JAN/20/2005 15:15A

ꢁ

00:10:21

00:15:21

00:30:21

Start

Rec. Mode

[DVD] Available

Add to list

[DVD] Available

04:00:16

Add to list

4.48 GB

04:00:16

Total

00:56:03

4.48 GB

Total

1.88 GB

High ⁰S¹p^:0e^6:e⁰³d

1.88 GB

MOVE

SELECT

RETURN

EXIT

MOVE

SELECT

RETURN

EXIT

Press the ANYKEY button. Press the …† buttons to

select Rec. Mode, then press the ENTER or √

button.

Press the …† buttons to select the record mode you

want, then press the ENTER button.

Rest of the copying process can be performed as

described in pages 104 to 105.

Copy

HDD

Copy To : HDD

ꢁ

DVD

No.

Title

Rec.Mode

Length

Copy

JAN/18/2005 12:15A

JAN/19/2005 13:15A

JAN/20/2005 15:15A

ꢁ

00:10:21

00:15:21

00:30:21

Start

HDD

Copy To : HDD

ꢁ

DVD

Rec. Mode

[DVD] Available

No.

Title

Rec.Mode

Length

Add

JAN/18/2005 12:15A

JAN/19/2005 13:15A

JAN/20/2005 15:15A

ꢁ

00:10:21

00:15:21

00:30:21

Start

Add

list

04:00:16

Delete

4.48 GB

Total

00:56:03

Rec. Mode

[DVD] Available

Preview

Rec. Mode

Add to list

√

04:00:16

1.88 GB

4.48 GB

Total

00:56:03

MOVE

SELECT

RETURN

EXIT

1.88 GB

MOVE

SELECT

RETURN

EXIT

Press the …† buttons to select the record mode you

want, then press the ENTER or √ button.

Repeat steps 9~11 to select a title to change it’s

record mode.

Rest of the copying process can be performed as

described in pages 104 to 105.

English - 109

Download from Www.Somanuals.com. All Manuals Search And Download.

ress the ANYKEY button.

Copying from DVD to

HDD

Title List

Length

HDD

Rename

No.

Title

Protection

Copy

001 JAN/18/2005 12:15A 00:10:21

002 JAN/19/2005 12:15A 00:40:03

003 JAN/20/2005 12:15A 00:20:15

004 JAN/25/2005 12:15A 00:50:16

Delete

Edit

√

Playlist

JAN/18/2005 12:15 AM CH11

Navigation_12:15

√

JAN/18/2005

Using the TITLE LIST button

Select Media

^SPDisc Manager

1/1 Page

MOVE

SELECT

RETURN

EXIT

Press the OPEN/CLOSE button and place a

recordable disc on the disc tray.

Press the …† buttons to select Copy, then press the

ENTER or √ button.

The Copy screen is displayed.

Press the OPEN/CLOSE button to close the disc tray.

With the unit in Stop mode/Playback mode, press the

TITLE LIST button.

Copy

DVD-RAM(VR)

Copy To : DVD

ꢁ

HDD

No.

Title

Rec.Mode

LP HS

Length

The Title List screen is displayed.

JAN/18/2005 12:15A

ꢁ

00:10:21

Start

Add to list

[HDD] Available

40:16:56

52.99 GB

Total

00:10:21

Title List

DVD-RAM(VR)

No.

Title

Length

0.25 GB

001 JAN/18/2005 12:15A 00:10:21

002 JAN/19/2005 12:15A 00:40:03

003 JAN/20/2005 12:15A 00:20:15

004 JAN/25/2005 12:15A 00:50:16

MOVE

SELECT

RETURN

EXIT

JAN/18/2005 12:15 AM CH11

JAN/18/2005 12:15 AM

- About Using COPY button -

1/1 Page

Press the …† buttons to select the title you want

to copy from the title list and then press the COPY

button on the remote control. The Copy screen

will appear with the selected title added.

• During Playback, you can also copy the title by

pressing the COPY button.

MOVE

SELECT

RETURN

EXIT

Using the MENU button.

• With the unit in Stop mode/Playback mode,

press the MENU button.

• Press the …† buttons to select Title,

then press the ENTER or √ button.

The Title List screen is displayed.

Press the ENTER or √ buttons to select Start, then

press the ENTER button.

Press the …† buttons to select the title you want to

copy.

To move to other pages, press the SKIP (

buttons.

)

SKIP( ) : previous page of title list

SKIP( ) : next page of title list

DVD

HDD

If you want to stop copy, press CANCEL key.

110 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

After a successful copy, “The title is successfully copied.”

message is displayed.

Copying MP3 or JPEG

Files from a Disc to HDD

File Copy

The title is successfully copied.

Insert a JPEG disc or MP3 disc into the disc tray.

Press the OPEN/CLOSE button to close the disc tray.

Wait until LOAD disappears from the front panel display.

Check that the disc has enough available space for the

recording.

•

Copying Multiple Titles at One Time – Same as an

HDD operation(See page 106)

Deleting an Undesired Title from the Copy List –

Same as an HDD operation(See page 108)

Previewing a Selected Title from the Copy List –

Same as an HDD operation(See page 108)

Press the …† buttons to select Music or Photo, then

press the ENTER or

√

button.

The MP3 or JPEG file list is displayed.

Music List

ꢀ

√

flower.mp3

02 : 10

You cannot copy anything else on finalized

DVD-R and DVD-RW(V mode) mode.

flower.mp3

love. mp3

NOTE

MP3

ꢀ

You cannot copy a DVD-VIDEO to HDD.

Straight from the heart.mp3

Run to you.mp3

MP3

High speed copying from a DVD-RAM or

DVD-RW (VR mode) is available.

Heaven.mp3

01/15

This Love.mp3

4.0 MB

1/3 Page

ꢀ

When you copy from DVD-RW(V mode)/-R

disc to HDD, high speed copy is not

available.

MOVE

SELECT

RETURN

EXIT

Record mode cannot be changed when

you copy a title from DVD to HDD.

Contents Copy Specifications

Contents

DVD ꢁ HDD

Recorded Video Title

Supported

Copy Protected Title

Copy Once Title

Not supported

English - 111

Download from Www.Somanuals.com. All Manuals Search And Download.

Folder Copy

Press the …† buttons to select the MP3 or JPEG files

you want to copy, then press the ANYKEY button.

Insert a Disc (JPEG or MP3) in to the tray.

Music List

flower.mp3

» 02 : 10

flower.mp3

love. mp3

Press the …† buttons to select Music or Photo, then

MP3

Copy

Straight from the heart.mp3

Run to you.mp3

press the ENTER or

√

button.

Play Mode

MUSIC

√

Go To Playlist

Heaven.mp3

The MP3 or JPEG folder is displayed.

01/15

New Playlist

4.0 MB

Select Media

This Love.mp3

1/3 Page

MOVE

SELECT

RETURN

EXIT

Music List

00 : 00

Song1

Song2

Song3

Song4

Song5

Press the …† buttons to select Copy, then press the

ENTER or √ button.

ROOT

01/15

_ _

1/1 Page

RETURN

File copy begins.

MOVE

SELECT

EXIT

When copying a file from a disc to HDD, it is

copied to the HDD’s Music or Photo folder.

Music List

Press the …† buttons to select the MP3 or JPEG

folder you want to copy, then press the ANYKEY

button.

Bryan Adams.mp3

» 02 : 10

MUSIC

Bryan Adams.mp3

Copying...

_{Bryan Adams_2.mp3}HDD

MP3

Disc Type : HDD

free space : 2939 MB

total file number : 1/1

MUSIC

MP3 Straight from the heart.mp3

MP3 Run to you.mp3

MP3 Heaven.mp3

Copying File Name : Bryan Adams.mp3

This Love.mp3

43 %

1/3 Page

Music List

00 : 00

CANCEL

Song1

Song2

Song3

Song4

Song5

Copy

ROOT

Go To Playlist

01/15

New Playlist

_ _

Select Media

√

1/1 Page

RETURN

MOVE

SELECT

EXIT

Press the …† buttons to select Copy, then press the

ENTER or √ button.

Folder copy begins.

Subfolders and files in the selected folder are copied.

Music List

Bryan Adams.mp3

MUSIC

Bryan Adams.mp3

Copying...

_{Bryan Adams_2.mp3}HDD

MP3

Disc Type : HDD

free space : 2939 MB

total file number : 1/16

MUSIC

MP3 Straight from the heart.mp3

MP3 Run to you.mp3

MP3 Heaven.mp3

Copying File Name : Bryan Adams.mp3

This

43^L%^ove.mp3

1/3 Page

CANCEL

112 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢀ

Pressing the CANCEL button during folder

copying will cancel the folder copying after

the current file is copied.

NOTE

Disc Manager

ꢀ

Up to 1,500 files and 1,000 subfolders can

be copied into one folder for MP3 files.

Up to 4,500 files and 1,000 subfolders can

be copied into one folder for JPEG files.

Editing the Disc Name

Follow these instructions to give a name to a disc.

Files having an existing name of

***.mp3/***.jpg, is automatically renamed

to ***01.mp3/***01.jpg and copied.

ꢀ

It allows up to 999 copies to have the

same name.

ꢀ

You cannot copy an Audio CD.

MP3 or JPEG files can be copied only

from a disc to the HDD.

With the unit in Stop mode, press the ANYKEY

button.

ꢀ

File size on a disc and the copied file

in the HDD may be slightly different

due to the file system.

Scene Navigation

Time Navigation

Marker

Contents Copy Specifications

Rec. Mode

√

Select Madia

Disc Manager

Contents

MP3

HDD ꢁ DVD

DVD ꢁ HDD

Not supported

supported

JPEG(photo)

Not supported

supported

Press the …† buttons to select Disc Manager, then

press the ENTER or

√

button.

Disc Manager

DVD-RAM(VR)

Disc Name

Used Space

08 SP

Available Space

Disc Protection Info

Not Protected

SELECT

Rename

Protection

Delete All

Format

MOVE

RETURN

EXIT

English - 113

Download from Www.Somanuals.com. All Manuals Search And Download.

Disc Protection

Disc Protection allows you to protect your discs from

being formatted or deleted due to unintended

operations.

Press the œ √ buttons to select Rename, then press

the ENTER button.

The Rename screen is displayed.

Rename

DVD-RAM(VR)

With the unit in Stop mode, press the ANYKEY

button.

Back Space

MOVE

Space Delete

SELECT

Clear Save

RETURN EXIT

Scene Navigation

Time Navigation

Marker

Select the desired characters using the …† œ √

buttons, then press the ENTER button.

Rec. Mode

√

Select Madia

Disc Manager

Rename

DVD-RAM(VR)

Disc

Press the …† buttons to select Disc Manager, then

press the ENTER or

√

button.

Back Space

MOVE

Space Delete

SELECT

Clear Save

RETURN EXIT

Disc Manager

DVD-RAM(VR)

Disc Name

Used Space

03 SP

Available Space

Press the …† œ √ buttons to select Save,

then press the ENTER button.

A disc name is given to the disc.

Disc Protection Info

Not Protected

SELECT

Rename

Protection

Delete All

Format

MOVE

RETURN

EXIT

Disc Manager

DVD-RAM(VR)

Disc Name

Disc

Used Space

Available Space

08 SP

Press the œ √ buttons to select Protection, then press

the ENTER button.

Disc Protection Info

Not Protected

Rename

Protection

Delete All

Format

Disc Manager

MOVE

SELECT

RETURN

EXIT

DVD-RAM(VR)

Disc Name

Used Space

Disc Prot₁e₁c_:ti₅o₆n_S: _P

Available Space

Disc Protection Info

Off

Not Protected

Rename

Protection

Delete All

Format

MOVE

SELECT

RETURN

EXIT

ꢀ

You may need to clear disc protect before

beginning editing.

NOTE

Depending on the kind of disc, the

displayed screen may be different.

Press the œ √ buttons to select On, then press the

ENTER button.

114 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢀ

Formatting a Disc

Use these instructions to format a disc.

The disc protect should also be cleared.

Shortly after HDD disc format, the

space equivalent to several 10 seconds

or several minutes will be displayed as

used. This is because a certain HDD

space is always reserved for data

recording for the purpose of EPG

service even though there is no data to

be recorded after such a format

process.

NOTE

Press the HDD or DVD button on the unit or remote

to select which disc (DVD/HDD) you want to format.

DVD-RW

With the unit in Stop mode, press the ANYKEY

button.

•

You will be prompted with the confirmation

message “Choose the recording format for

DVD- RW.”

Scene Navigation

Time Navigation

Marker

Disc Manager

DVD-RW(VR)

Disc Name

Rec. Mode

√

Used Space

Select Madia

Disc Manager

Available Space

29 SP

Choose the recording format for DVD-RW.

Not Protected

Disc Protection Info

Current Rec. Mode

DVD-VR

VR-Mode

DVD-V

Rename

Protection

Delete All

MOVE

Finalize

Format

RETURN EXIT

SELECT

Press the …† buttons to select Disc Manager, then

press the ENTER or

√

button.

Disc Manager

HDD

[Title Partition]

Press the œ √ buttons to select Yes, then press the

ENTER button. The disc is formatted.

Used Space

Available Space

054

20 SP

[Music/Photo Partition]

Used Space

0006MB

Available Space

10034MB

DVD-VR and DVD-V are defined according to their

recording format.

Delete All

SELECT RETURN

Format

EXIT

MOVE

DVD-VR

DVD-RAM

DVD-RW

DVD-V

DVD-RW

DVD-R

DISC

Press the œ √ buttons to select Format, then press the

ENTER button.

Disc Manager

HDD

[Title Partition]

Used Space

ꢀ

Discs created in DVD-V mode can only be

played in DVD recorders. Discs created in

DVD-VR mode can be played on all

standard DVD players.

Available Space

054

20 SP

Do you want to format this disc?

[Music/Photo Partition]

NOTE

Used Space

0006MB

Yes

Available Space

10034MB

Delete All

Format

MOVE

SELECT

RETURN EXIT

HDD/DVD-RAM

•

You will be prompted with the confirmation

message “Do you want to format this disc?”.

If you select Yes, you will be prompted with the

confirmation message “All data will be deleted.

Do you want to continue?”.

•

English - 115

Download from Www.Somanuals.com. All Manuals Search And Download.

Delete All Title Lists/Music

Lists/Photo Lists

Press the œ √ buttons to select the Title, Music or

Photo, then press the ENTER button.

Title

Disc Manager

HDD

[Title Partition]

With the unit in Stop mode, press the ANYKEY

Used Space

Available Space

054

20 SP

button.

All title will be deleted.

[Music/Photo Partition]

Do you want to continue?

Used Space

0006MB

Yes

Available Space

10034MB

Delete All

Format

MOVE

SELECT

RETURN EXIT

Scene Navigation

Time Navigation

Marker

Rec. Mode

√

Select Madia

Disc Manager

Music

Disc Manager

HDD

[Title Partition]

Used Space

Available Space

054

20 SP

All music will be deleted.

Press the …† buttons to select Disc Manager, then

press the ENTER or

[Music/Photo Partition]

Do you want to continue?

Used Space

0006MB

Yes

√

button.

Available Space

10034MB

Delete All

Format

MOVE

SELECT

RETURN EXIT

Disc Manager

HDD

[Title Partition]

Used Space

Available Space

054

20 SP

[Music/Photo Partition]

Used Space

0006MB

Photo

Available Space

10034MB

Delete All

SELECT RETURN

Format

EXIT

Disc Manager

HDD

[Title Partition]

MOVE

Used Space

Available Space

054

20 SP

All photo will be deleted.

[Music/Photo Partition]

Do you want to continue?

Used Space

0006MB

Yes

Available Space

10034MB

Press the œ √ buttons to select Delete All, then press

the ENTER button.

Delete All

Format

MOVE

SELECT

RETURN EXIT

Disc Manager

HDD

[Title Partition]

Used Space

Available Space

054

20 SP

Press the œ √ buttons to select Yes, then press the

ENTER button.

All title lists, music list or photo lists are deleted.

Select contents to delete all

[Music/Photo Partition]

Used Space

_AvailableTitle

^0006MBMusic

10034MB

Photo

Space

Delete All

Format

EXIT

MOVE

SELECT

RETURN

•

When Protected Entry exists: The Delete All Title List

function will not operate. If there is a title containing a

still picture, however, that function will not operate. If

you want to delete a protected entry, disable Protect

for it on the Lock item.

116 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

•

When Protected Entry exists: The Delete All Title List

function will not operate. If there is a title containing a

still picture, however, that function will not operate.

If you want to delete a protected entry, disable Protect

for it on the Lock item.

Delete All Title Lists

When protected a DVD-RAM is used, data cannot be

deleted from a disc.

With the unit in Stop mode, press the ANYKEY

button.

Press the œ √ buttons to select Yes, then press the

ENTER button.

All title lists are deleted.

Scene Navigation

Time Navigation

Marker

Rec. Mode

√

Select Madia

Disc Manager

Press the …† buttons to select Disc Manager, then

press the ENTER or

√

button.

Disc Manager

DVD-RAM(VR)

Disc Name

Used Space

06 SP

Available Space

Disc Protection Info

Not Protected

SELECT

Rename

Protection

Delete All

Format

MOVE

RETURN

EXIT

Press the œ √ buttons to select Delete All, then press

the ENTER button.

•

You will be prompted with the confirmation message

“Do you want to delete all title lists?”.

Disc Manager

DVD-RAM(VR)

Disc Name

Used Space

Do you want to₀d₀elete₅a₆ll title lists?

Available Space

_InY_foes

Not Protected

Disc Protection

Rename

Protection

Delete All

Format

MOVE

SELECT

RETURN

EXIT

English - 117

Download from Www.Somanuals.com. All Manuals Search And Download.

If you select Yes, you will be prompted again with the

message “Disc will be finalized. Do you want to

continue?”.

Finalizing a Disc

After you record titles onto a DVD-RW/DVD-R disc with

your HDD & DVD RECORDER, it needs to be finalized

before it can be played back on external devices.

Disc Manager

DVD-RW(VR)

Disc Name

Used Space

Available Space

29 SP

Disc will be finalized.

Do you _Pw_roa_ten_ct_tet_do continue?

Not

Disc Protection Info

Current Rec. Mode

Yes

VR-Mode

Rename

Protection

With the unit in Stop mode, press the ANYKEY

button.

Delete All

MOVE

Finalize

Format

RETURN EXIT

SELECT

Press the œ √ buttons to select Yes, then press the

ENTER button.

The disc is finalized.

Scene Navigation

Time Navigation

Marker

Rec. Mode

√

Select Madia

Disc Manager

ꢀ

Once a disc is finalized, you cannot delete

Press the …† buttons to select Disc Manager, then

press the ENTER or

entries from the record list.

NOTE

√

button.

ꢀ

After being finalized, the DVD-R/DVD-

RW(video mode) operates in the same

manner as a DVD-Video.

Disc Manager

DVD-RW(VR)

Disc Name

ꢀ

Depending on the disc type, the displayed

Used Space

Available Space

screen may be different.

Not Protected

VR-Mode

Disc Protection Info

Current Rec. Mode

ꢀ

Finalizing time may be different depending

on the amount of data recorded on the

disc.

Rename

Protection

Delete All

MOVE

Finalize

SELECT

Format

EXIT

RETURN

ꢀ

Data on the disc will be damaged if the

HDD & DVD RECORDER is powered off

during finalization process.

Press the …† buttons to select Finalize, then press the

ENTER button.

You will be prompted with the message “Do you want to

finalize disc?”.

ꢀ

When the disc contains a music or JPEG

files, it cannot be finalized.

Disc Manager

DVD-RW(VR)

Disc Name

Used Space

Available Space

06 SP

Do you want to finalize disc?

Not Protected

Disc Protection Info

Current Rec. Mode

Yes

VR-Mode

Rename

Protection

Delete All

MOVE

Finalize

Format

RETURN EXIT

SELECT

118 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the œ √ buttons to select Yes, then press the

ENTER button.

The disc is unfinalized.

Unfinalizing a Disc (V/VR mode)

To add additional titles to a finalized disc,you must first

unfinalize it.

ꢀ

A DVD-RW can be finalized or unfinalized

in Video mode.

NOTE

With the unit in Stop mode, press the ANYKEY

button.

Finalize

Unfinalize

DVD-RW(V)

Mark

DVD-Video(RW)

Additional recording, protection

and deletion are possible.

Operation Same as DVD-Video

Scene Navigation

Time Navigation

Marker

Select Madia

Disc Manager

√

ꢀ

A DVD-RW can be finalized or unfinalized

in VR mode.

Finalize

Unfinalize

Press the …† buttons to select Disc Manager, then

press the ENTER or √ button.

Mark

DVD-RW(VR:F)

DVD-RW(VR)

Additional recording,

deletion, editing, and

Additional recording,

deletion, editing, and

protection are possible.

Disc Manager

DVD-RW(VR:F)

Disc Name

Operation

Used Space

protection are impossible.

Available Space

00 SP

DVD-VR

Current Rec. Mode

unfinalize

SELECT RETURN

Format

EXIT

MOVE

Press the œ √ buttons to select Unfinalize, then

press the ENTER button.

You will be prompted with the message “Do you want

to unfinalize disc?”.

Disc Manager

DVD-RW(VR:F)

Disc Name

Used Space

Available Space

00 SP

Do you want to unfinalize disc?

DVD-V

Yes

Current Rec. Mode

unfinalize

Format

MOVE

SELECT

RETURN EXIT

If you select Yes, you will be prompted again with the

message “Disc will be unfinalized. Do you want to

continue?”.

Disc Manager

DVD-RW(VR:F)

Disc Name

Used Space

Available Space

00 SP

Disc will be unfinalized.

Do you want to continue?

DVD-V

Yes

Current Rec. Mode

unfinalize

Format

MOVE

SELECT

RETURN EXIT

English - 119

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Additional

Information

If your product malfunctions, go through the

checkpoints below before contacting a Samsung

authorized service center.

Power

The input is displayed for a while when the

power is turned on.

The HDD & DVD RECORDER

Checkpoint 1

requires some time to initialize and the

input will be displayed for approx. 10

seconds after it is turned on.

Recording

Cannot record TV programs.

Check whether the power cord is

Checkpoint 1

securely plugged into the power outlet.

Checkpoint 2

Did you set the HDD & DVD

RECORDER channel settings correctly?

Checkpoint 3

Check the free space on your

HDD/DVD-RAM/-RW/-R discs.

I pressed the REC button but there is no response.

Recording is possible for HDD/DVD-

Checkpoint 1

RAM/DVD-RW/-R discs only.

If a program is copy protected, it

cannot be recorded.

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . .120

Problems and Solutions . . . . . . . . . . . . . . . . . . . .124

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . .126

120 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback

Cannot play the disc.

The angle operation does not work while playing a

DVD disc.

Check whether the disc is inserted

correctly with the label facing up.

Checkpoint 1

Checkpoint 2

Checkpoint 3

The angle operation is available only

Checkpoint 1

when the disc contains images

captured from different angles.

Check the regional code of the DVD

disc.

This HDD & DVD RECORDER cannot

play some types of discs.

(See pages 6, 49)

The selected audio and/or subtitle language is not

played.

icon appears on the screen.

You cannot use this operation or

function due to one of the following

reasons:

(1) Your DVD disc restricts it.

(2) Your DVD disc does not support

this feature (for example: angles)

(3) The feature is not available at the

moment.

Checkpoint 1

Audio and subtitle languages are

Checkpoint 1

disc-specific. Only the sound and

subtitle languages contained on the

DVD disc are available and displayed

in the disc menu.

(4) You've requested a title, chapter, or

scan time that is out of range.

Cannot copy title or file to the other mode.

Play mode settings are different from the settings

configured in the Settings menu.

DVD discs encoded with copy

Checkpoint 1

protection can not be copied to HDD.

The disc does not support all selected

Checkpoint 1

functions. In this case, some settings

configured in the settings menu may

not work properly.

Refer to “Contents Copy Specifications”

on page 6 to check if copying is

supported.

Checkpoint 2

Cannot change the aspect ratio.

The aspect ratio is fixed for DVD

Checkpoint 1

discs. (See page 44)

English - 121

Download from Www.Somanuals.com. All Manuals Search And Download.

Video

The disc revolves, but no image or bad quality

images are displayed.

No audio output.

Check whether you have selected

Checkpoint 1

Be sure that the Video Setting is

properly set. (See pages 44~46)

Checkpoint 1

the correct digital output options in

the Audio Output Options menu.

(See page 42)

Checkpoint 2

Check whether there is damage to or

any foreign material on your disc.

Some low quality discs may not play

Checkpoint 3

properly.

Checkpoint 4

If scenes change from dark to bright

Remote Control Unit

suddenly, the screen may shake

vertically temporarily, but this is not a

fault.

The remote control doesn't work.

Sound

Point the remote control at the remote

Checkpoint 1

No sound.

control sensor on your HDD & DVD

RECORDER. Allow for proper

distance. Remove obstacles between

your HDD & DVD RECORDER and

the remote control.

Are you watching a program in slow

Checkpoint 1

or skip mode?

Checkpoint 2

Check whether the batteries are

drained.

If you are playing a program at a

speed other than normal speed,

sound will not be heard.

Check the TV/DVD selection button

setting.

Checkpoint 3

Checkpoint 4

Checkpoint 2

Check the connections and settings.

(See pages 23~25, 42~43)

Check whether TV control button is

selected or not.

Checkpoint 3

Check whether the disc is damaged.

Clean the disc, if necessary.

Checkpoint 4

Check whether the disc is inserted

correctly with the label facing up.

122 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Other

I forgot my password for parental supervision.

Other problems.

Checkpoint 1

Read the table of contents and then

Checkpoint 1

Press and hold the PLAY (

)

and

find and read the section describing

your problem, follow the instructions

given.

STOP ( ) button on the front panel of

the HDD & DVD RECORDER for more

than 5 seconds with no disc in the unit.

All settings including the password will

revert to the factory settings. Do not use

this unless absolutely necessary. (Note

that this function is possible only when

no disc is inserted.)

Checkpoint 2

Checkpoint 3

Plug your HDD &DVD RECORDER

off and on.

If the problem still persists, contact a

nearby Samsung service center. To

locate a center near you, call 1-800

SAMSUNG.

Is it possible to change a subtitle and an audio

signal on a recorded disc?

A recorded disc is played with only

Checkpoint 1

the subtitle and the audio signal

which were selected during recording.

English - 123

Download from Www.Somanuals.com. All Manuals Search And Download.

Problems and Solutions

(Display error Message)

Before contacting a Samsung authorized service center, perform the following simple checks.

Problem

Explanation / Solution

You cannot record a copy protected movie.

You cannot record. This disc is protected.

•

You can’t record the video since it is protected by copyright.

This disc cannot be formatted (the disc is

protected).

This disc cannot be renamed

(the disc is protected).

Disc you are using is protected. To record on this disc or use

this function, cancel the disc protection function. Refer to

page 114.

The disc cannot be finalized (the disc is

protected).

This [Menu] is not available (the disc is

protected).

The disc cannot be played,

The disc does not match the regional code for your area and

cannot be played on this device.

•

Please check the regional code of the disc.

This disc cannot be formatted.

Please check the disc.

You cannot format the disc

because of error detection.

Make sure there are no scratches or dirt on the disc.

You cannot finalize the disc

because of error detection.

You cannot unfinalize the disc

because of error detection.

The disc cannot be played,

Please check the TV system.

• The disc is PAL format and cannot be played on this unit.

The disc can be neither played nor recorded.

Make sure there are no scratches or dirt on the disc.

•

The disc cannot be played, Please check the

disc.

• You can’t use the disc because it contains errors from

previous recordings.

If the disc has invalid information,

no more titles can be recorded.

Please format the disc beforehand.

Use the disc after formatting.

124 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Problems and Solutions

(Display error Message)

Problem

Explanation / Solution

• You can’t use the disc because it contains errors from

previous recordings.

Error is detected on the disc.

Use the disc after formatting.

• When operating, errors happen. Turn off the device.

(To turn off, press and hold the power button on the front of

the device for 10 seconds.)

System error is found.

Please try it again after turning off the power.

After turning off, press the Open button and remove the disc

from the device.

• Make sure the DV device is connected properly to the DV

connection Jack.

The DV device is not connected.

If it is connected properly, turn it off and on once again.

If you are unable to solve the problem after reading the above instructions, note:

•

The model and serial number on the rear of your HDD & DVD RECORDER

The warranty information

A clear description of the problem

Then contact your nearest SAMSUNG authorized service center. Call 1-800-SAMSUNG for a center near you.

English - 125

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

Power requirements

120V AC, 60Hz

Power consumption

Weight

44 Watts

9.27 lb (4.20 kg)

General

Dimensions

17in (43 cm) (W) x 10in (25.5 cm) (D) x 3.1in (7.9 cm) (H)

+41°F to +95°F

Operating temp.

Other conditions

Keep level when operating. Less than 75% operating humidity

1.0 V p-p at 75Ω load, sync negative

S-Video input (Y: 1.0Vp-p, C: 0.286Vp-p at 75Ω load)

Max.Audio Input Level : 2Vrms

Video (1,2)

Audio(1,2)

DV Input

Input

IEEE 1394(4p) compatible jack

Regular TV broadcasting: VHF (2~13), UHF (14~69)

Cable TV broadcasting: 1~125

Receivable Channels

Analog output jacks 1, 2

Audio

Optical/Coaxial digital audio output

Full scale Analog output level : 2Vrms

Video output jack 1

Output

Video

S-Video output 1 (Y:1.0Vp-p, C:0.286Vp-p at 75Ω load)

Component output 1 (Y: 1.0Vp-p, Pb: 0.70Vp-p, Pr: 0.70Vp-p at 75Ω load)

Picture Compression format MPEG-II

Audio Compression format Dolby Digital 2ch/256Kbps

Recording

XP (about 8.5 Mbps), SP (about 4.5 Mbps), LP (about 2 Mbps),

EP (about 1.6 Mbps or about 1.2 Mbps),

Audio Frequency Response 20 Hz ~ 20 kHz

Recording Quality

Audio Output

For DVD discs, audio signals recorded at 96kHz sampling frequency are converted into and output at 48kHz.

Disc Type

DVD

48 / 96kHz

48kHz

AUDIO CD(CD-DA)

44.1kHz

Analog Audio Output

Digital Audio Output

44.1kHz

126 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

TV Guide On Screen

User Manual

TV Guide On Screen Overview

†

For use in USA

Guide Setup for a DVD Recorder

†

Screen Components

†

Guide Navigation

†

Main Services

- Listing, Search, Schedule, Recordings,

Setup, Record and Remind

Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128

TV Guide On Screen Overview . . . . . . . . . . . . . . .128

Guide Setup for a DVD Recorder . . . . . . . . . . . . .129

Screen Component . . . . . . . . . . . . . . . . . . . . . . .134

Panel Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137

Guide Navigation . . . . . . . . . . . . . . . . . . . . . . . . . .138

Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . .138

Listing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .139

Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140

Recordings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .143

Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145

Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147

Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153

Remind . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157

Frequently Asked Questions(FAQs) . . . . . . . . . . .162

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . .163

TV Guide On Screen Glossary . . . . . . . . . . . . . . .164

†

Frequently Asked Questions(FAQs)

†

Troubleshooting

†

TV Guide On Screen Glossary

English - 127

Download from Www.Somanuals.com. All Manuals Search And Download.

Notice

TV Guide on Screen

Overview

Congratulations, your new TV contains the TV Guide

On Screen Interactive Program Guide! This Guide

has features and services that help you get the most

out of your viewing experience.

Trademark Notice

In the United States, TV GUIDE and other related

marks are registered marks of Gemstar-TV Guide

International, Inc. and/or one of its affiliates.

Your Guide has the following features:

Three 30-minute time periods program listings in

a 16x9 aspect ratio

License Notice

Eight days of show listings (today plus seven

days)

The TV Guide On Screen system is manufactured

under license from Gemstar-TV Guide

International, Inc. and/or one of its affiliates.

Icons that indicate show rating, stereo, HDTV,

new episode, etc.

Intuitive up/down/left/right navigation using your

remote control

Set shows to Record

Patent Notice

Schedule show Reminders

Search shows by category (e.g., Movies, Sports,

Children, HDTV, etc.)

The TV Guide On Screen system is protected by

one or more of the following issued United States

patents 6,498,895, 6,418,556, 6,331,877;

6,239,794; 6,154,203; 5,940,073; 4,908,713;

4,751,578; 4,706,121.

Search for shows based on keywords or

alphabetically by title

Recordings for DVD recordable and DVR shows

Direct tuning to a channel

Shows information while watching TV

Streamlined System Setup and default setting

options

Disclaimer Notice

Channel lineup customization

Gemstar-TV Guide International Inc. and/or its

related affiliates are not in any way liable for the

accuracy or availability of the program schedule

information or other data in the TV Guide On Screen

system and cannot guarantee service availability in

your area. In no event shall Gemstar-TV Guide

International, Inc. and/or its related affiliates be liable

for any damages in connection with the accuracy or

availability of the program schedule information or

other data in the TV Guide On Screen system

Help screens while in the Guide

GGG

The TV Guide On Screen system works

with cable-ready, cable box, and digital

cable services, as well as over-the-air

broadcast; it does not provide listings for

satellite services.

NOTE

128 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Guide Setup for a DVD Recorder

Welcome Screen

Initial DVD Recorder set up leads you to the

Welcome screen.

Or press the GUIDE button to begin setup.

The Welcome Screen lists features in the Guide.

Press ENTER to display Screen Reminder

Screen.

Reminder Screen

If you previously skipped Guide setup, you see the

Reminder Screen when you power On your DVD

Recorder.

To make a selection, use the up or down arrow

buttons to highlight an option, and press ENTER.

Or press the Guide button to begin setup.

The Welcome Screen lists features in the Guide.

Press ENTER to display Screen 1.

GGG

If you decide not to setup the Guide now,

this reminder screen will appear each time

you power On the DVD Recorder (except if

you selected “Don't remind me again”).

NOTE

Screen 1

Screen 1: Country

This screen asks you the location of your DVD

Recorder.

Use the up or down arrow button to highlight a

country.

Press ENTER to display Screen 2.

English - 129

Download from Www.Somanuals.com. All Manuals Search And Download.

Screen 2

Screen 2: Enter ZIP or Postal Code

If you selected USA in Screen 1, you see the ZIP

Code screen.

You input numbers by either

- pressing the number buttons on the remote or

- using the up or down arrow button to display a

number, and then the left or right arrow button to

move to another field.

Press ENTER to display Screen 3.

If you selected Canada in Screen 1, you see the

Postal Code screen.

You input characters by using the up or down

arrow button, and then the left or right arrow button

to move to another field.

Press ENTER to display Screen 3.

Screen 2-1

Screen 3

Screen 4

Screen 3: Do you have Cable?

If you select Yes, you will see Screen 4.

If you select No, you will see Screen 12.

Screen 4: Do you have a Cable Box?

If you select Yes, you will see Screen 5.

If you select No, you will see Screen 13.

130 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Screen 5

Screen 5 : Which TV Guide input is the

cable box plugged into?

If you select RF TUNER, you will see screen 6.

If you make any other choice, you will see screen 7.

Screen 6

Screen 6 : Cable Box Tuning Channel

Select the channel used for the cable box.

Press ENTER to display Screen 7.

Ch 2

Ch 3

Ch 4

Screen 7

Screen 7 : Cable Box Configuration Diagram

The diagram shows the correct way to install the

G-LINK cable from the back of the DVD Recorder

to the cable box. Make sure the G-LINK cable is

properly installed.

Press ENTER to display Screen 8.

Screen 8

Screen 8 : Cable Box Brand Name

Use the up and down arrows to select a cable box

brand.

Press ENTER to display Screen 9.

English - 131

Download from Www.Somanuals.com. All Manuals Search And Download.

Screen 9

Screen 9 : Cable Box Preparation

Follow the on-screen instructions, and press

ENTER to display Screen 10.

Screen 10

Screen 10: Cable Box Code Testing

When testing is done, Screen 11 displays

automatically.

Screen 11

Screen 11: Cable Box Tuned to Channel 9?

If you select Yes, you will see Screen 12.

If you select No, a different code is tested in Screen 10.

GGG

Many Cable Boxes require testing more

than one code.

NOTE

If you select Test this code again, the same code is

tested again in Screen 10.

132 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Screen 12

Screen 12:Do you have an antenna

connected?

If you select Yes, you will see Screen 13.

GGG

If you selected No in Screen 3 then you

must select Yes in this screen to receive a

channel lineup and listings.

NOTE

If you select No, you will see Screen 13.

If you select YES, some devices may display an additional

screen. After that screen, you will see Screen 13.

Screen 13

Screen 13:Are the settings correct?

If you select Yes, end setup, you see Screen 14.

If you select No, repeat setup process, you will see

Screen 1.

Screen 14

Screen 14:Congratulations

You have successfully completed Setup!

Press ENTER and you will see Screen 15.

Screen 15

Screen 15:Helpful Information

This screen tells you valuable information on using

your Guide.

Press Enter to watch TV.

English - 133

Download from Www.Somanuals.com. All Manuals Search And Download.

Screen Components

Guide screens have all or many of the features and controls in common, as shown in the following figure:

Video Window - displays TV video while the Guide is displayed

Tile - displays show title

Highlight - indicates an active tile

Info Box - provides information for a highlighted item

Info Button - cycles through the various Info Box sizes

Channel Logo - identifies network

Record/Remind Icons - indicates a show is set to Record or set as a Reminder

Panel Ad - location where show- or product-specific information appears (and also where Panel Menu

appears)

Channel Ad - location where show-specific information appears

Service Bar - provides access to the main Guide Services

Current Service Label - indented to indicate current Service displayed

Current Service

Label

TV GUIDE

LOGO

Time

Slot

Navigation

Bar

Tile Highlight

Clock

Time Tab

Video

Window

Tile

HD Icon

Panel Ad

Record &

Remind Icons

Channel Logo

Info.box

Channel Ad

134 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Video Window

TV Guide

Logo

Clock

The Video Window is located in the upper-left corner of

the Guide. When you enter the Guide, the TV video for

the current show appears in the Video Window. The

Video Window also includes a clock display and a

lock/unlock icon to indicate the status of the Video

Window.

Lock/Unlock

Icon

You can set the Video Window to remain on a single

channel (lock) or change channels (unlock) as you

navigate through LISTINGS. With a channel logo or the

LISTINGS Service Label highlighted, press the Menu

button to display the option to Lock/Unlock the Video

Window.

Video

Window

Info Box

An Info Box contains information about a show,

service, ad, or provides general help. A Show Listing

Info Box can have up to three sizes: Small, Large, and

“No”. The default size of the Info Box is Last Used.

Press the Info Button to cycle among the sizes. The

user may change the default size in the Setup Service.

Info Button

The Info button

appears on the button bar, if

the Info box size can change and/or if there are

additional Info screens.

Pressing the INFO button on the remote cycles

between Info box sizes, as available.

In some instances, the INFO button is used to

page forward, if there are additional pages of

information, such as a Panel Ad, Channel Ad, or

help text.

Icons

cons are visual representations in TV Guide On Screen of

Current information

Current and future actions

Current and future status

English - 135

Download from Www.Somanuals.com. All Manuals Search And Download.

Name

Icon

Description

Indicates additional Info box information is available or that the Info box has

additional sizes.

Info Button

Indicates additional Info box information is available. Icon only appears for

Panel Menus.

Progress Bar

HDTV

Indicates how much time has elapsed in current program.

Show is presented in High-Definition TV, if available

New

Stereo

Show is new (not a re-run)

Show is available in Stereo

Closed Captioning is available for the show

For example,

TV Rating

TV rating for the show

Show is set to Record Once

Record Once

Record Daily

Record Off

Other frequencies are Daily, Regularly, and Weekly

Indicates the program is set to record Daily (manual record setting only).

Show is set to Record but is currently Off (show remains in Schedule)

Show is Suspended due to a schedule conflict (show remains in Schedule)

Record Suspended

Remind Once

Recording resumes when the conflict no longer exists

Show is set to Remind Once

Other frequencies are Daily, Regularly, and Weekly

Remind Daily

Remind Off

Indicates the program is set to Remind Daily (manual record setting only).

Show is set to Remind but is currently Off (show remains in Schedule).

Show is Suspended due to a schedule conflict (show remains in Schedule).

Remind Suspended

Remind resumes when the conflict no longer exists.

Recording Media HDD

Recording Media DVD

Displays to indicate HDD storage

Displays to indicate DVD storage

Delete Recording

“I delete”

Indicates recording will not be deleted until done so by user

Lock/Unlock

Indicates status of the Video Window

136 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Panel Menu

Highlight

Parked Highlight

Odometer

Number Entry Box

A Panel Menu appears when the MENU or ENTER (context dependent) button is pressed on a highlighted

tile and additional options are available.

When a Panel Menu appears, the highlighted tile is parked (changes color).

The Panel Menu displays over the Panel Ad and below the Video Window.

Panel Menu options within a Service are described in each respective Service section.

The up and down arrow moves between the options within the Panel Menu.

The left and right arrows move to adjacent options unless highlight is on an odometer, where left/right

arrows change the odometer choice.

Screen

If a Panel Menu contains more menu options than

can be displayed on a single screen, a more G

icon appears at the bottom of a menu.

Pressing ENTER from an odometer or number entry

box moves the highlight to the default command

button of that Panel Menu (for example, Schedule

Reminder).

Pressing ENTER from a highlighted command

button executes the action and closes the Panel

Menu.

Select Cancel and press ENTER to close this

menu, revert to previous settings, and return to

the parked tile.

Pressing the MENU button at any location in the

menu cancels any option changes made during

this session, reverts to previous settings and

returns the highlight to the parked tile.

English - 137

Download from Www.Somanuals.com. All Manuals Search And Download.

Guide Navigation

Remote Control

The following table describes remote control

actions related to the Guide.

When you enter the Guide while watching TV, the

highlight appears on the currently watched show

in Listings.

Use the arrow buttons on the remote control to

highlight any show and then ENTER to tune to

that show. You can scroll left or right to view

additional days to a maximum of seven.

Button

TV Guide

Description

When watching TV, enters the

Guide and highlights a show

listing

When in the Guide, returns to

watching TV and displays the

show in the video window

For setting recordings, reminders, and additional

options, press the MENU button to display a

Panel MENU with options for the currently

highlighted program.

Provides directional control

G, G, œ, √

Makes a selection or executes

an action

With a currently airing show

listing highlighted, returns to

watching TV and tunes to the

show channel

ENTER

To access another Guide Service, use the up

arrow to highlight the LISTINGS Service Label.

Use the left or right arrow to highlight a different

Service and then the down arrow to use that

Service. Helpful information about each Service

appears in the Info Box.

With a future airing show listing

highlighted, displays a Panel

Menu with viewing options

Displays the Panel Menu from

which you can choose options

(e.g., record, remind, keyword,

etc.)

GGG

When in the Guide, pressing the TV

GUIDE button on the remote control will

always tune to the TV show

NOTE

displayed in the Video Window.

INFO

REC

Cycles between levels of

information, as available, in a

Service or other type of screen

When in the Guide or watching

TV, initiates the recording process

PAGE UP/DOWN

When in the Guide, moves,

when applicable, from one set of

screen information to the next

Provides numeric entries for

direct tuning, priority ordering,

and channel editing

NUMBERS

138 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Listings

Screen 1

Access Listings by pressing the TV GUIDE button on

your remote. Listings is always the first Service

displayed in the Guide.

With Listings highlighted, press the INFO button to

display a Help screen. Press the INFO button again

to close the screen.

Use the up/down/left/right arrow buttons to move the

highlight within LISTINGS to

View show listings for today plus 7 days (8 days

total)

Read show descriptions

Tune directly to a show currently airing

Set a show to Remind

Set a show to Record

Lock and unlock the Video Window

Access Panel and Channel Ads

English - 139

Download from Www.Somanuals.com. All Manuals Search And Download.

Search lets you find shows by category (HDTV, Movies, Sports, Children, Educational, News, Variety, Series),

Keyword, or Alphabetical.

Category Search Example: Movies

Screen 1

With Search highlighted, press the INFO button to

display a Help screen.

Screen 2

Press the INFO button again to close the screen.

Screen 3

From Search, use the down arrow to highlight

Movies.

140 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Panel Menu Navigation

NOTE

Press the Info button to display a Help screen. Press the Info button again to close the screen.

The up and down arrows move the highlight among the options within a Panel Menu. The number

buttons on the remote are used to input information.

An odometer option has arrows on both sides. Use the left and right arrows to cycle through the

different options.

Press ENTER from an option to highlight the default command button (e.g., Done). Press ENTER

again to execute the action and close the panel menu.

Select CANCEL, and press ENTER to close the menu and return to the previous screen, or press

MENU on the remote to cancel any changes and close the menu.

Use the down arrow to highlight a subcategory

(for example, All).

Screen 4

Press ENTER to display a list of all Movies,

organized by date and time.

Screen 5

Highlight a show and press ENTER to watch

(if On now) or the MENU button to display the

Episode Options menu.

In the Episode Options menu, you can choose to

set a recording, a reminder, or tune to the

channel.

Screen 6

• Go to Service Bar - closes the menu, changes

no information, and returns to the Search

Service Bar.

• Tune to Channel - exits the Guide and tunes to

the channel of the highlighted show (show airs in

the future).

• Set Recording - displays the Record Options

menu, from which you can set frequency, start

and end time, etc

• Set Reminder - displays the Remind Options

menu, from which you can set frequency (once,

regularly, weekly), start time, automatically power

On, and auto-tune the TV.

This option displays Watch Now if the show

is currently airing.

• automatically power On, and auto-tune the TV.

NOTE

• Cancel - closes the menu, changes no

information, and returns to the highlighted show.

English - 141

Download from Www.Somanuals.com. All Manuals Search And Download.

Keyword Search Example

Keyword search lets you enter a word(s) for a particular

show title found in the Listings and Recordings

Services.

Screen 1

Highlight the KEYWORD Section Bar, and press

ENTER to display the Keyword Search menu.

Highlight New Search, and press ENTER.

Screen 2

The Search Options menu is displayed.

Highlight Category, and use the left/right arrows to

select a category to search (e.g., All, HDTV,

Children, Sports, etc.).

When finished, use the down arrow to highlight

Enter Keyword.

Screen 3

The keyboard is displayed.

Use the arrow buttons to highlight a character,

and press ENTER to display it. When complete,

highlight Done and press ENTER.

Screen 4

A list of all matching shows for that keyword is

displayed.

Like the Category Search Example, you can

highlight a show, and press ENTER to display all

airings.

You can then highlight a specific show listing and

press ENTER to watch (if On now), or the MENU

button to display the Episode Options menu.

From the Episode Options menu, choose Set

Recording, Set Reminder, or Tune to Channel,

as previously described.

142 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Screen 5

The Guide stores all the keywords you create. To

edit or delete a keyword, highlight the keyword,

and press the MENU button. A Search Options

menu is displayed.

• Go to Service Bar - closes the menu, changes

no information, and returns to the Search

Service Bar.

• Edit Search - displays the keyboard, where you

can change the keyword.

• Delete Search - A Confirm menu is displayed.

Screen 5-1

-Yes : deletes the Search

- No : closes the panel menu

• Cancel - closes the menu, changes no

information, and returns to the highlighted show.

The Guide can store a maximum of 250

keyword entries.

NOTE

Recordings

Screen 1

Recordings displays list of previously recorded or

currently recording shows.

With Recordings highlighted, press the INFO

button to display a Help screen. Press the INFO

button again to close the screen.

Screen 2

Press the …† buttons to highlight the show and

then pressing the MENU button to display the

Recordings Options menu. Use the up and down

arrows to choose between the following :

• View As, use the left and right arrows to choose between

- Group : Recorded shows are listed without listing

every recorded episode (see example in

Screen 2)

English - 143

Download from Www.Somanuals.com. All Manuals Search And Download.

- List : Displays a complete list of every recorded

episode for a show(see example in Screen 2-1)

Screen 2-1

• Sort By, use the left and right arrows to choose

between

- Title : shows are displayed in alphabetical order

(see example in Screen 2)

- Date : Shows are displayed by date and time,

with most recent date and time first (see

example in Screen 2-1)

When finished, press ENTER to highlight Done,

Press ENTER again to close the menu and

display the Recordings with the selected options.

• Cancel - Closes the menu, changes no

information, and returns to the highlighted

Service bar.

Screen 3

In List View, highlight an episode. An Info box

provides show information. Press the Menu button

to display the Episode Options menu.

In Group View, highlight a show and press ENTER

to view a summary for all the recorded shows

along with the episode list(Press ENTER again to

close the episode list).

Screen 5

Highlight a specific episode and press the Menu

button to display the Episode Options menu.

To view an episode, you can do one of the

following :

• highlight an episode, and press ENTER to view it

now. The episode either starts from where it was

last stopped (if viewed previously) or from the

beginning.

• Highlight an episode and press the MENU button

to display the Episode Options menu.

- Go to Service Bar : closes the menu,

changes no information, and returns to the

Schedule Service Bar.

Screen 5-1

- Resume : starts from where it was last

stopped (if viewed previously) or from the

beginning.

- Play from Beginning : starts from the

beginning, even if stopped previously.

- Delete Episode : deletes the episode from the

Recordings. A Confirm menu is displayed.

Yes : deletes the episode.

No : closes the panel menu.

- Cancel : closes the menu, changes no

information, and returns to the highlighted show.

144 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Panel Menu Navigation

The up and down arrows move the

NOTE

highlight among the options within a

Panel Menu. The number buttons on the

remote are used to input information.

An odometer option has arrows on both

sides. Use the left and right arrows to

cycle through the different options.

Press ENTER from an option to highlight

the default command button (e.g., Done,

Resume). Press the ENTER again to

execute the action and close the Panel

Menu.

Select CANCEL and press ENTER to

close the menu and return to the

previous screen, or press MENU on the

remote to cancel any changes and close

the menu.

Schedule

Screen 1

Schedule lets you review, edit, or delete Record and

Remind events that you set previously.

With SCHEDULE highlighted, press the INFO

button to display a Help screen. Press the INFO

button again to close the screen.

An icon identifies the event type:

Record

• Once

: records the show one time

• Regularly

: the show title appears on any

Screen 1-1

day of the week, on the same channel and is at

the midway point of the originally scheduled

show (e.g., 8:15 for an 8:00–8:30 program,

9:30 for a 9:00–10:00 program)

• Weekly

: the show title appears on a

specific day of the week and is at the midway

point of the originally scheduled show (e.g.,

8:15 for an 8:00–8:30 program, 9:30 for a

9:00–10:00 program)

• Off

: keeps the show in the list but will not

record this show until the frequency is changed

English - 145

Download from Www.Somanuals.com. All Manuals Search And Download.

Remind

• Once

: sets a show reminder one time

: the show title appears on any day

• Regularly

of the week, on the same channel and is at the

midway point of the originally scheduled show

(e.g., 8:15 for an 8:00–8:30 program, 9:30 for a

9:00–10:00 program)

• Weekly

: the show title appears on a specific

day of the week and is at the midway point of the

originally scheduled show (e.g., 8:15 for an

8:00–8:30 program, 9:30 for a 9:00–10:00

program)

• Off

: keeps the show in the list but will not

remind until the frequency is changed

Screen 2

Highlight an event, and press the MENU button for

Schedule Options.

• Go to Service Bar - closes the menu, changes no

information, and returns to the Schedule Service

Bar.

• Tune to Channel - exits the Guide and tunes to the

channel of the highlighted show (show airs in the

future).

This option reads Watch Now if the show

is currently airing.

NOTE

Recording and Reminder options vary

depending on whether the highlighted

program is for a recording or reminder

event.

• Set Recording - opens a menu from which you can

set a recording for the show (Reminder is not

cancelled).

• Delete Reminder - removes the Reminder from the

Schedule, after a Confirm screen.

• Edit Reminder - opens a menu from which you can

change existing reminder information.

• Cancel - closes the menu, changes no information,

and returns to the highlighted show.

146 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Panel Menu Navigation

NOTE

Press the INFO button to display a Help

screen. Press the INFO button again to

close the screen.

The up and down arrows move the

highlight among the options within a

Panel Menu. The number buttons on the

remote are used to input information.

An odometer option has arrows on both

sides. Use the left and right arrows to

cycle through the different options.

Press ENTER from an option to highlight

the default command button (e.g., Done).

Press ENTER again to execute the action

and close the Panel Menu.

Select Cancel and press ENTER to close

the menu and return to the previous

screen, or press Menu on the remote to

cancel any changes and close the menu.

Setup

Screen 1

After you initially complete Guide Setup, you can

make changes to existing Guide settings in the

following areas:

• Change System Settings

• Change Channel Display

• Change Default Options

Screen 2

With SETUP highlighted, press the INFO button to

display a Help screen. Press the INFO button

again to close the screen.

Highlight a choice, press ENTER, and follow the

on-screen instructions.

English - 147

Download from Www.Somanuals.com. All Manuals Search And Download.

Change System Settings

Change System Settings lets you change your

channel lineup as well as any updates to the

information you entered during initial Guide setup

(e.g., ZIP code, cable, antenna, recorder, etc.).

Screen 1

Press ENTER to display the Confirming Your

Settings screen. You see your current settings.

Screen 2

Choose one of the options, press ENTER, and

follow the on-screen instructions.

(Refer to page 157 about Guide Setup.)

Change Channel Display

Screen 1

Change Channel Display lets you edit channel

information that appears in Listings. With Change

Channel Display you can

• Switch a channel

- On : the channel is always displayed in

Listings

- Off : the channel is never displayed in Listings

- Auto-Hide : the channel is only displayed

when program information is available

The default setting for each channel is set

by the transmitted data.

NOTE

148 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

• Change the service type if you are able to

switch the source of the channel (e.g., cable,

cable box, over-the-air, antenna, etc.)

• Change the tune channel number using your

remote control.

• Enter a position number in the number entry

box

- The position number determines where in

Listings the channel displays

- That number can range from 1 (top position)

to the total number of channels in Listings

Screen 2

Press ENTER to display the CHANNEL EDITOR

screen.

Press the INFO button to display a Help

screen. Press the INFO button again to

close the screen.

NOTE

When finished, press ENTER to highlight Done.

Press ENTER again to close the menu and accept

the changes.

If you do not wish to save the changes:

Highlight Go Back to Setup and press ENTER

to close the menu, change no information, and

return to the Setup Service Bar.

NOTE

Highlight Cancel and press ENTER to close the

menu, change no information, and return to the

highlighted channel.

English - 149

Download from Www.Somanuals.com. All Manuals Search And Download.

Change Default Options

Change Default Options lets you change default

settings in the following categories:

• General Defaults

• Record Defaults

• Remind Defaults

Screen 1

Highlight Change Default Options, and press

ENTER.

General Default Options

Screen 1-1

-1 General Default Options lets you set defaults for

the following:

• The initial Info Box size when the Guide is

entered. Choices are No, Small, Large, and

Last Used (default)

• The Info Box cycles when the INFO button is

pressed while in the Guide.Choices are No only,

Small only, Large only, No & Small, No &

Large,Small & Large, All (default)

- No only : No Info Box

- Small only : Small Info Box

- Large only : Large Info Box

- No & Small : You can toggle between No or

a Small Info Box

- No & Large : You can toggle between No or

a Large Info Box

- Small & Large : You can toggle between

a Small or Large Info Box

- All(default) : You can toggle between No, or

a Small or Large Info Box

Screen 2

• Automatic entry into the Guide (Auto-Guide)

when the TV is powered On.

Choices are On (default) and Off

Highlight General Defaults, and press the MENU

button to display the General Defaults menu.

150 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the INFO button to display a Help

screen. Press the INFO button again to

close the screen.

NOTE

When finished, press ENTER to highlight Done.

Press ENTER again to close the menu and accept

the changes.

If you do not wish to save the changes:

Highlight Go to Service Bar and press ENTER

to close the menu, change no information, and

return to the Setup Service Bar.

NOTE

Highlight Cancel and press ENTER to close the

menu, change no information, and return to the

highlighted channel.

Record Defaults

Screen 1-1

-1 Record Defaults lets you set defaults for the

following:

• When to start the record event. Choices are

120 minutes early to 120 minutes late, to On time

(default)

• When to end the record event. Choices are 120

minutes early to 120 minutes late, to On time

(default)

• Recorder choice

• Keep Until to keep a record event (if applicable)

• The Quality of the recording (if applicable)

Screen 2

Highlight Record Defaults, and press the MENU

button to display the Record Defaults menu.

Press the INFO button to display a Help

screen. Press the INFO button again to

close the screen.

NOTE

English - 151

Download from Www.Somanuals.com. All Manuals Search And Download.

When finished, press ENTER to highlight Done.

Press ENTER again to close the menu and accept

the changes.

If you do not wish to save the changes:

Highlight Go to Service Bar and press ENTER

to close the menu, change no information, and

return to the Setup Service Bar.

NOTE

Highlight Cancel and press ENTER to close

the menu, change no information, and return to

the highlighted option.

Screen 1

Remind Defaults

Remind Defaults lets you set defaults for the

following:

• Auto Tune DVD RECORDER to the channel, when

a Reminder is scheduled. Choices are Yes and No

(default).

• When to display the reminder screen. Choices are

30 seconds to 15 minutes early, to 30 seconds to

15 minutes late, to On time.

Screen 2

Default = 1 min early.

Highlight Remind Defaults, and press the MENU

button to display the Remind Defaults menu.

Press the INFO button to display a Help

screen. Press the INFO button again to

NOTE

close the screen.

When finished, press ENTER to highlight Done.

Press ENTER again to close the menu and accept

the changes.

152 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

If you do not wish to save the changes:

Highlight Go to Service Bar and press ENTER

to close the menu, change no information, and

return to the Setup Service Bar.

NOTE

Highlight Cancel and press ENTER to close

the menu, change no information, and return to

the highlighted channel.

Record

You can set a show to Record in LISTINGS, SEARCH,

and SCHEDULE or change Record settings for a

show in SCHEDULE.

There are 3 ways to set a show to Record:

Using the Record Button on the Remote

Press the REC button on the remote to record the

show Once with current default settings (Start and

End recording On Time). Each time you press the

REC button, you change the record

frequency (but not the default settings) among

Once (default), Regularly, Weekly, and then

Cancel.

The applicable Record icon(

) appears on

the show title, as the REC button is pressed.

NOTE

Using a Panel Menu

Screen 1

Highlight a show, and press the MENU button to

display the Episode Options menu.

English - 153

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the INFO button to display a Help

screen. Press the INFO button again to

close the screen.

NOTE

Screen 1-1

• Highlight Set Recording, and press ENTER to

display the Record Options menu.

• Highlight the Frequency option, and use the left

and right arrows to choose between Once,

Regularly, Weekly, and Off, as previously

described.

• Highlight the Start or End option, and use the

left and right arrows to choose between options

that range between 120 minutes early to 120

minutes late, to On time (default).

• Recorder choice (DVD or HDD)

• How long to keep a record event (if applicable).

• Keep Until for a record event (if applicable).

• The Quality (SP, LP, EP, XP) of the recording

(if applicable).

Screen 2

When finished, press ENTER to highlight Schedule

Recording. Press ENTER again to close the menu.

You see a Record icon for the selected frequency

next to the show title.

Highlight Cancel to close the menu, change no

information, and return to the highlighted show.

• Once

: records the show one time

• Regularly

: the show title appears on each day

the program is broadcast, on the same channel.

• Weekly : the show title appears on a specific

day of the week.

• Off (not cancel)

: keeps the show in the list but

will not record this show until the frequency is

changed

• Cancel (no icon displayed) : does not record

Using Manual Recording

Screen 1

Highlight Schedule, and press the MENU button

to display the Schedule Options menu.

154 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the INFO button to display a Help

screen. Press the INFO button again to

close the screen.

NOTE

Use the arrow buttons to move through the

options. Use the number or arrow keys to change

the information, as necessary.

Screen 3

Highlight New Manual Recording and press

ENTER to display the Record Options menu.

• Current information (i.e., date, start and end

times, channel, input) is displayed. Use the

arrow buttons to change the information.

• Recorder choice

• Keep Until for a record event (if applicable).

• The Quality of the recording (if applicable).

Press the INFO button to display a Help

screen. Press the INFO button again to

close the screen.

Screen 3-1

NOTE

• Use the left and right arrows to choose

Frequency between Once, Daily, Weekly, and

Off, as follows.

- Once

: records the time, channel, input,

recorder combination one time

- Daily

: records the time, channel, input,

recorder combination Monday through Friday

- Weekly

: records for the channel/time

combination on a specific day of the week

- Off (not cancel)

: keeps the time, channel,

input, recorder combination in the list without

recording until the frequency is changed

English - 155

Download from Www.Somanuals.com. All Manuals Search And Download.

Screen 4

When finished, press ENTER to highlight

Schedule Recording. Press ENTER again to

close the menu.

You will see a Record icon for the selected

frequency next to the show title.

Manual recording is listed by channel

number.

NOTE

If you do not wish to save the changes:

Highlight Cancel and press ENTER to close the

menu, change no information, and return to the

highlighted show.

Screen 4-1

• Before recording begins and if your TV is On, a

notification screen appears. At that time, you can

choose to start or cancel recording. If the TV is

not On, the recording occurs as scheduled. If

there is no activity for 3 minutes, the notification

screen automatically closes and completes the

highlighted item.

Screen 1

Record Conflict

A conflict message appears for the following

reasons:

• a show set to Record overlaps with any part of

another show previously set to Record

• a show set to Record overlaps with a show

previously set to auto-tune

Select one of these options:

Screen 1-1

• record anyway - this show will override an

existing show set to Record or auto-tune

• don’t record this show - cancels the Recording

156 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Panel Menu Navigation

NOTE

Press the INFO button to display a Help

screen. Press the INFO button again to

close the screen.

The up and down arrows move the

highlight among the options within a

Panel Menu. The number buttons on the

remote are used to input information.

An odometer option has arrows on both

sides. Use the left and right arrows to

cycle through the different options.

Press ENTER from an option to highlight

the default command button (e.g., Set

Recording, Set Reminder, Schedule

Recording, Done). Press ENTER again to

execute the action and close the Panel

Menu.

Select Cancel and press ENTER to close

the menu and return to the previous

screen, or press Menu on the remote to

cancel any changes and close the menu.

Remind

You can change Reminder settings for a show in the

Schedule.

There are 2 ways to set a show Reminder:

Using a Panel Menu

Screen 1

Highlight a show, and press the MENU button to

display the Episode Options menu.

Press the INFO button to display a Help

screen. Press the INFO button again to

close the screen.

NOTE

English - 157

Download from Www.Somanuals.com. All Manuals Search And Download.

Screen 2

Highlight Set Reminder, and press ENTER to

display the Remind Options menu.

• Highlight the Frequency option, and use the left

and right arrows to choose among

- Once

: sets a show reminder one time

- Regularly

: the show title appears on any

day of the week, on the same channel and is

at the midway point of the originally scheduled

show (e.g., 8:15 for an 8:00–8:30 program,

9:30 for a 9:00–10:00 program)

- Weekly

the show title appears on a

specific day of the week and is at the midway

point of the originally scheduled show (e.g.,

8:15 for an 8:00–8:30 program, 9:30 for a

9:00–10:00 program)

- Off

: keeps the show in the list but will

not remind until the frequency is changed

• Auto Tune

- Automatically tune TVto the channel, when a

Reminder is scheduled. Choices are Yes and

No (default).

• When to display the reminder screen. Choices

are 30 seconds to 15 minutes early, to 30

seconds to 15 minutes late, to On time Default =

1 min early

Press the INFO button to display a Help

screen. Press the INFO button again to

close the screen.

NOTE

Screen 3

When finished, press ENTER to highlight

Schedule Reminder. Press ENTER again to

close the menu.

You see a Remind icon for the selected frequency

next to the show title.

If you do not wish to save the changes:

Highlight Cancel and press ENTER to close the

menu, change no information, and return to the

highlighted show.

158 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Screen 1

Using Manual Reminder

Highlight the Schedule Service label, and press

the MENU button to display the Schedule

Options menu.

Press the INFO button to display a Help

screen. Press the INFO button again to

close the screen.

NOTE

Screen 2

Use the arrow buttons to move through the

options. Use the number or arrow buttons to

change the information, as necessary.

• Highlight New Manual Reminder and press the

ENTER buttons to display the Remind Options

menu.

• Current information (i.e., date, start and end

times, channel, input, frequency) is displayed.

• Highlight the Frequency option, and use the left

and right arrows to choose between Once, Daily,

Weekly, and Off, as follows.

- Once

: sets a show reminder for the time,

channel, input, reminder combination one time

- Daily

: reminds for the time, channel, input,

reminder combination Monday through Friday

- Weekly

: reminds for the channel/time

combination on a specific day of the week

- Off (not cancel)

: keeps the time, channel,

input, reminder combination in the list without

reminding until the frequency is changed

• Auto tune - Automatically tune to the channel

when a Reminder is scheduled. Choices are Yes

and No (default).

Screen 3

When finished, press ENTER to highlight Schedule

Reminder. Press ENTER again to close the menu.

You see a Remind icon ( ) for the selected

frequency next to the show title.

Manual reminder is listed by channel

number.

NOTE

If you do not wish to save the changes:

Highlight Cancel to close the menu, change no

information, and return to the highlighted show.

English - 159

Download from Www.Somanuals.com. All Manuals Search And Download.

• Based on your option settings and if the TV is On

at the reminder time, a notification screen will

appear. You can then choose to hide the reminder,

or highlight the show, and press ENTER to tune to

the show. If there is no activity for 3 minutes, the

notification screen automatically closes and

Screen 3-1

Screen 3-2

completes the highlighted item (hide reminders).

If you choose Hide Reminders, the window closes

for the show or shows, but does not affect other

Reminders you set.

If more than 2 reminders are set for the

same time, arrows appear on the Reminder

screen. Use the up and down arrows to view

the shows.

NOTE

Remind Conflict

A conflict message appears for the following

reasons:

• a show set with an Auto-Tune Reminder has

the same start time as an existing Auto-Tune

Reminder.

• a show set with an Auto-Tune Reminder

overlaps with a Recording already scheduled.

Screen 2

Select one of these options:

• auto-tune anyway - this show will override an

existing show set to auto-tune

160 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

• proceed, no auto-tune - set the show as a

Screen 2-1

Reminder but do not auto-tune

Screen 2-2

• don’t set this reminder - cancel the Reminder

Panel Menu Navigation

NOTE

Press the INFO button to display a Help

screen. Press the INFO button again to

close the screen.

The up and down arrows move the

highlight among the options within a

Panel Menu. The number buttons on the

remote are used to input information.

An odometer option has arrows on both

sides. Use the left and right arrows to

cycle through the different options.

Press ENTER from an option to highlight

the default command button (e.g., Watch

Now, Set Reminder, Schedule Reminder).

Press ENTER again to execute the action

and close the Panel Menu.

Select Cancel and press ENTER to close

the menu and return to the previous

screen, or press Menu on the remote to

cancel any changes, and close the menu.

English - 161

Download from Www.Somanuals.com. All Manuals Search And Download.

If I have a power outage, do I need to complete

Setup again?

Frequently Asked

Questions(FAQs)

No, Setup information is stored in TV

Checkpoint 1

Guide On Screen.

If I add a recorder or change my cable service,

how do I change my Setup information?

Is Help available in the Guide? If so, how do I find it?

1) Highlight the Setup Service in the

Answer 1

Guide.

Yes. Highlight any of the 5 main

Checkpoint 1

2) Use the down arrow to select

Change System Settings.

3) Follow the on-screen instructions.

Services (i.e., Listings, Schedule,

Recordings, Setup, Search) and press

the Info button. An Expanded Info Box

displays additional help information;

press Info again to close the box.

Help is also available in a Panel Menu.

Press the Info button to display an

Expanded Info Box; press Info again

to close the box.

A show entry in the Guide reads “No Listing.”

What does that mean?

After some show titles, I have noticed from 1 to 4

stars (****). What does that mean?

Show information for that entry was

Checkpoint 1

not available during the last Guide

information update (download).

Show information is updated on a daily

basis.

These stars are a broadcast-industry

Checkpoint 1

rating system used to inform you of a

show’s quality. The more stars, the

better the rating.

When I entered the Guide, I was asked to choose

from more than one channel lineup. What should I

do?

I have seen the word “download” in reference to

the Guide. What does that mean?

Select the lineup that most closely

Checkpoint 1

matches the one for your area. If after

you choose the lineup, you want to

make changes

A download sends channel and show

Checkpoint 1

information to a TV Guide On Screen

device. A download happens about

once a day.

1) Highlight the Setup Service in the

Guide.

2) Use the down arrow to select

Change Channel Display.

3) Follow the on-screen instructions.

162 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Can I set a Record or Remind event without

highlighting a show title in the Guide?

Troubleshooting

Yes. TV Guide On Screen has a

Checkpoint 1

Manual Record and Remind feature.

Highlight Schedule and press menu.

Choose the event type, press ENTER

and then enter date, start and stop

time, channel number, etc.

I got listings after my initial Setup; however,

some days read “No Listings.”

What do the frequencies for Record and Remind

mean?

After initial Setup, it can take up to a

Checkpoint 1

week to populate the full 8 days of

listings. Once populated, 8 days of

information should always be

available.

• Once—records/reminds the show

Checkpoint 1

one time

• Daily (manual only)—records the

time, channel, input, recorder

combination Monday through Friday

• Regularly— records/reminds for the

channel/time combination on any day

of the week, on the same channel

• Weekly— records/reminds for the

channel/time combination on a

specific day of the week

My Guide listings disappeared after a power

failure.

You should begin to receive listings

Checkpoint 1

again within 24 hours.

• Off (not cancel)—keeps the show in

the list but will not record/remind the

show until the frequency is changed

Some channel numbers in the Guide are

incorrect.

How can I look for a specific show in the Guide?

You can correct them using Change

Checkpoint 1

Channel Display under Setup.

Search lets you find shows by

Checkpoint 1

I have not received any Guide show listings.

category (HDTV, Movies, Sports,

Children, Educational, News, Variety,

Series), Keyword, or Alphabetical.

Listings begin to appear within 24

Checkpoint 1

hours after a successful Setup.

• Check the connections between the

TV, cable, antenna, and the IR cable

if using a cable box.

• Verify Setup information under

Change System Settings.

• Make sure the cable box is On, if

applicable.

• Review Screen 4 and Screen 5 in the

Initial Guide Setup section.

English - 163

Download from Www.Somanuals.com. All Manuals Search And Download.

A show I set to Record did not occur.

I set a show with the Power On TV option and it

did not.

• Check the Schedule menu and verify

that the show is listed as a

Reminder.

• Highlight the show under Listings

and do the following:

Checkpoint 1

• Make sure your recorder is turned

Checkpoint 1

Checkpoint 2

Checkpoint 3

Off before the recording begins.

• Make sure there is a tape or DVD in

the Recorder.

• Check the Schedule menu and verify

that the show is listed before

recording begins.

Checkpoint 2

- Press the Menu button on the

remote.

- Use the down arrow to highlight

Edit Reminder, and press ENTER.

- Verify the Power On TV option

reads Yes.

• Check the placement of the IR cable

in front of your recorder.

Checkpoint 4

• The DVD RECORDER must be Off

at the scheduled time for Power On

TV.

Checkpoint 3

The TV did not tune to a show I scheduled with

the Reminder feature.

•Check the Schedule menu and verify

Checkpoint 1

that the show is listed.

TV Guide on Screen

Glossary

•If you have a cable box, check the IR

cable.

Checkpoint 2

I set a show to Auto-Tune and it did not.

• 1394 - High-speed port that is used to transfer certain

types of data in real-time, such as video

• Check the Schedule menu and verify

that the show is listed as a

Reminder.

Checkpoint 1

• Antenna - Receives over-the-air (OTA) broadcast

signals for channels which may appear in Listings

• Arrow buttons - Up/down and left/right buttons on the

remote are used to move around in the Guide or

perform Guide-related activities while watching TV

(e.g., set a Reminder notification)

• Highlight the show under Listings

and do the following:

- Press the Menu button on the

remote.

Checkpoint 2

- Use the down arrow to highlight

Edit Reminder, and press ENTER.

- Verify the Auto-Tune option reads

Yes.

• Auto-Tune - Reminder Panel Menu option that lets

you choose to have the DVD RECORDER

automatically tune to the channel—if you are watching

it at the time

• The TV must be On at the scheduled

Checkpoint 3

• Cable Ready - A device that does not require a cable

time for Auto-Tune.

box to receive cable programming

• Channel Ad - A promotion that appears within a

Listings section

• Channel Editor - A feature accessed through Listings

or Setup that allows you to re-order, change the

channel number, or switch a channel On or Off in

Listings

• Channel Logo - An icon that identifies the network

• Direct Dialing - Access to any channel within Listings

by entering a channel number on the remote

164 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

• Direct Tune - When a show currently airing is

highlighted in the Guide, pressing the ENTER button

on the remote closes the Guide and tunes to the show

• Keyword Search – The ability to enter a word to

search for a particular show

• Lineup - Channel and show information in a broadcast

or cable system area based on information you

provided during Setup

• Digital Video Disc (DVD) Recorder - A recorder that

stores show data on a recordable DVD for later

viewing on a DVD player

• Listings Service - The first point of entry in the Guide

where you can view up to 8 days of listings and show

descriptions, tune to a show, set a show to record or

remind, etc.

• Expanded Info Box - A window that covers the right

side of the Guide and provides additional information

about a topic. This window appears for a highlighted

Panel Ad or Channel Ad, or when the Info button is

pressed in a Panel Menu when highlighting one of the

main Services

• Lock/Unlock - When locked , the Video Window does

not change as you move through Listings; when

unlocked , the Video Window does change

• Frequently Asked Questions (FAQs) - questions and

answers for users, based on their past product

experience

• Menu Button - A remote control button that is used to

display a Panel Menu

• Number Entry Box – A Panel Menu option in which

you use your remote to enter numbers

• Guide - TV Guide On Screen Interactive Program

Guide that provides show listings, search, schedule,

recordings, and setup capabilities

• Highlight - A visual cue indicating the current area of

focus

• Odometer - A Panel Menu option that lets you make a

• Icons – Symbols representing features or services.

selection using left and right arrow buttons

For example,

= stereo;

=remind;

= closed caption;

= record;

• On Screen Display (OSD) - A graphical display that

overlays a portion of the TV video (e.g., Reminder

notification)

= information available

• Info Box - Contains text describing the currently

highlighted area in the Guide that may be in the form

of help text or information about the highlighted area

(e.g., show description)

• One-Touch Recording – An action which allows you

to set a show to record by highlighting it in the Guide

and pressing Record on the remote

• Over the Air (OTA) - A device that receives broadcast

signals by antenna, as opposed to cable

• Info Button - A remote control button that is used to

cycle between Info box sizes, as available; page

forward, if there are more pages of information (e.g.,

Panel Ad); or access Help text, as available

• Panel Ad - A promotional area that appears below the

Video Window

• Panel Menu - A selection of options which appears in

the Panel Ad area and contains a list of all options that

apply to the Parked Highlight

• Initial Setup - After your device is connected, setup

your Guide so you can receive program listings and

use Guide recording capabilities; if Setup in not

completed initially, the Setup Reminder Screen

appears next time

Screen

• Interactive Program Guide (IPG) - a design from TV

Guide On Screen that provides channel lineup and

8 days of show listings from which you can Sort by

category or keyword, and set shows to Record or

Remind

• IR Cable - A connection or device that sends remote

commands to a separate cable box

English - 165

Download from Www.Somanuals.com. All Manuals Search And Download.

• Panel Menu Option - Any option displayed in a Panel

Menu (e.g., Done, Start, Auto-Tune, Channel, Cancel,

etc.)

• Reminder Notification Screen - A message that

appears when a scheduled show is about to begin

• Parked Highlight - When a Panel Menu is displayed,

indicates the object to which the Panel Menu applies

• Playback bar – An OSD that is overlaid on top of the

TV Video that provides progress bar and status

information for the playback of a recording.

• Search Service - A feature that lets you find shows by

category (HDTV, Movies, Sports, Children, Educational,

News, Variety, Series), Keyword, or Alphabetical. Once

a show is found, you can watch it (if airing currently), or

set a Record or Remind event

• Program Info Bar - An OSD that provides a quick way

• Service Bar - The access point to Guide features:

to identify current channel and show information

Listings, Search, Schedule, Recordings, Setup

• Setup Reminder Screen - If you do not Setup the

Guide during Initial Setup, this screen lets you choose

to Setup now, later, or do not remind again

• Progress Bar - A function in the show-related Info

box, the Playback bar and the Program Info Bar

displays how much of the show has already elapsed

and the start and finish times

• Setup Service - A feature that lets you modify existing

Guide settings, modify option settings (e.g., Record

defaults), or change channel display settings

• Schedule Service - A feature that lets you review,

edit, or delete Record and Remind events you

previously set

• Record – A setting to create a Record event for a

show, or Channel Ad or Panel Ad linked to a show and

also customize the record options (start time,

frequency, etc.)

• Video Window - The video area that appears in the

top left corner in the Guide

• Record Conflict - A message that appears for the

following reasons:

- a show set to Record overlaps with any part of

another show previously set to Record

- a show set to Record overlaps with a show

previously set to Auto-Tune

• Record Notification Screen - A message that

appears when a scheduled show is about to record

• Recordings Service – A feature which displays

previously recorded or currently recording shows on a

DVR or the currently inserted DVD in a DVD Recorder

• Remind - You can set a Remind event for a show, or

Channel Ad or Panel Ad linked to a show and also

customize the remind options (start time, frequency,

auto-tune, etc.)

• Reminder Conflict - A message that appears for the

following reasons:

- a show set with a Reminder has the same start time

as an existing Reminder

- a show set with a Reminder overlaps with a show

previously scheduled to Record

166 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Warranty

LIMITED WARRANTY TO ORIGINAL PURCHASER

This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC.

(SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by

SAMSUNG against manufacturing defects in materials and workmanship for the following limited warranty

period:

One (1) Year Parts / Ninety Days (90) Labor

This limited warranty begins on the original date of purchase, and is valid only on products purchased and

used in the United States, and does not include transportation, installation, removal or reinstallation. Warranty

repairs must be performed by SAMSUNG’s authorized service center. To receive warranty service, the original

dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG’s

authorized service center. Transportation to and from the service center is the responsibility of the purchaser.

SAMSUNG will repair or replace this product, at our option and at no charge with new or reconditioned parts, if

found to be defective during the limited warranty period specified above. The product must be returned during

the warranty period with transportation charges prepaid to SAMSUNG’s designated service center. Prior to

returning any product for warranty service, the purchaser must contact SAMSUNG for problem determination

and service procedures. SAMSUNG does not warrant uninterrupted or error-free operation of the product.

All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG.

Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is

longer.

This limited warranty covers manufacturing defects in materials and workmanship encountered in normal,

noncommercial use of this product and shall not apply to the following, including, but not limited to: damage

which occurs in shipment; applications and uses for which this product was not intended; failures or problems

which are caused by products or equipment not supplied by SAMSUNG; accidents, misuse, abuse, neglect,

misapplication, fire, water, lightning or other acts of nature; incorrect electrical line voltage, fluctuations or

surges; damage caused by improper or faulty installation; improper connection with any peripheral; product

alteration or modification; improper or unauthorized repair; cosmetic damage or exterior finish; product with

altered serial numbers; failure to follow operating instructions, customer adjustments, maintenance and

environmental instructions that are covered and prescribed in the instruction book; use of non-SAMSUNG or

unauthorized parts, supplies, accessories or equipment which damage this product or result in service

problems; failures or problems due to incompatibility with other equipment.

English - 167

Download from Www.Somanuals.com. All Manuals Search And Download.

ELECTRONICS

Samsung Electronics America, lnc.

105 Challenger Road

Ridgefield Park, NJ 07660-0511

TEL: 1-800-SAMSUNG (7267864)

www.samsung.com

English

AK68-00758B-01

Download from Www.Somanuals.com. All Manuals Search And Download.

PYLE Audio Stereo Amplifier AZR6XA User Guide
Radio Shack Headphones PRO 35A User Guide
RCA CD Player RCD159 User Guide
RCA Flat Panel Television J32L637 User Guide
Ricoh Printer SP 3500N User Guide
Rimage Printer 110660 001_F User Guide
Rowenta Hair Dryer CV8010 User Guide
Ryobi Sander CFS1500 User Guide
Samsung All in One Printer CLX 318X User Guide
Samsung DVD Player DVD 1080P8 User Guide