DVD Player
DVD-HD850
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Environmental info
- The battery used in this product contains chemicals that
are harmful to the environment.
- So, dispose of batteries in the proper manner, according to
federal, state, and local regulations.
The product unit accompanying this user manual is licensed under certain intellectual property
rights of certain third parties. This license is limited to private non-commercial use by end-user
consumers for licensed contents. No rights are granted for commercial use. The license does not
cover any product unit other than this product unit and the license does not extend to any
unlicensed product unit or process conforming to ISO/OUR 11172-3 or ISO/OUR 13818-3 used or
sold in combination with this product unit. The license only covers the use of this product unit to
encode and/or decode audio files conforming to the ISO/OUR 11172-3 or ISO/OUR 13818-3. No
rights are granted under this license for product features or functions that do not conform to the
ISO/OUR 11172-3 or ISO/OUR 13818-3.
CAUTION: USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER THAN
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
ENG-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
Accessories
Remote
Control
Batteries for
Remote Control
(AAA Size)
User’s Manual
Video/Audio
Cable
HDMI Cable
Install Batteries in the Remote control
1
Open the battery
cover on the back of
the remote control.
2
Insert two AAA batteries.
Make sure that the
polarities (+ and -) are
aligned correctly.
3
Replace the battery
cover.
If the remote control doesn’t operate properly:
- Check the polarity + - of the batteries (Dry-Cell)
- Check if the batteries are drained.
- Check if remote control sensor is blocked by obstacles.
- Check if there is any fluorescent lighting nearby.
ENG-4
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Chapter 1: Setup
General Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Disc Type and Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Tour of the Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Chapter 2: Connections
Choosing a Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Chapter 3: Basic Functions
Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Using the Search and Skip Functions . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Using the Display Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Using the Disc and Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Using the Function Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Slow Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Program Play & Random Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Chapter 4: Advanced Functions
Adjusting the Aspect Ratio (EZ View). . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Selecting the Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Selecting the Subtitle Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Changing the Camera Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Using the Instant Replay/Skip Function . . . . . . . . . . . . . . . . . . . . . . . . . 33
Using the Bookmark Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Using the Zoom Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Clips Menu for MP3/WMA/JPEG/MPEG4 . . . . . . . . . . . . . . . . . . . . . . . 37
Folder Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
MP3/WMA Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
MPEG4 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Picture CD Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Chapter 5: Changing Setup Menu
Using the Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Setting Up the Language Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Setting Up the Audio Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Setting Up the Display Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Setting Up the Parental Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Chapter 6: Reference
Controlling a TV with the Remote control. . . . . . . . . . . . . . . . . . . . . . . . 58
Firmware upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
ENG-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
SETUP
Note
General Features
- Discs which cannot be played with this
player.
Excellent Sound
• DVD-ROM
• CD-ROM
• CDI
• DVD-RAM
• CDV
• CVD
Dolby Digital, a technology developed by Dolby
Laboratories, provides crystal clear sound
reproduction.
• Super Audio CD(except CD layer)
• CDGs play audio only, not graphics.
- Ability to play back may depend on recording
conditions.
Screen
Both regular and widescreen(16:9) pictures can be
viewed.
Slow Motion
An important scene can be viewed in slow motion.
• DVD-R, +R
• CD-RW
• DVD+RW, -RW (V mode)
Program Play (CD)
You can program tracks to play in desired order.
- The unit may not play certain CD-R, CD-RW
and DVD-R due to the disc type or recording
conditions.
Parental Control (DVD)
The parental control allows users to set the level
necessary to prohibit children from viewing harmful
movies such as those with violence, adult subject
matter, etc.
COPY PROTECTION
Various On-Screen Menu Functions
You can select various languages (Audio/Subtitle)
and screen angles while enjoying movies.
Many DVD discs are encoded with copy
protection. Because of this, you should only connect
your DVD player directly to your TV, not to a VCR.
Connecting to a VCR results in a distorted picture
from copy-protected DVD discs.
Progressive Scan
Progressive scanning creates an improved picture
with double the scan lines of a conventional
interlaced picture.
This product incorporates copyright protection
technology that is protected by methods claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only unless otherwise authorized
by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
EZ VIEW (DVD)
Easy View enables picture adjustment to match your
TV's screen size (16:9 or 4:3).
Digital Photo View er (J PEG)
You can view Digital Photos on your TV.
Repeat
You can repeat a song or movie simply by pressing
the REPEAT button.
PROGRESSIVE SCAN OUTPUTS
(525p/625p)
MP3/WMA
This unit can play discs created from MP3/WMA files.
“CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE, IN CASE OF 525 OR 625 PROGRESSIVE
SCAN PICTURE PROBLEMS, IT IS RECOMMENDED
THAT THE USER SWITCH THE CONNECTION TO
THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE
ARE QUESTIONS REGARDING YOUR TV SET
COMPATIBILITY WITH THIS MODEL 525p AND 625p
DVD PLAYER, PLEASE CONTACT SAMSUNG'S
CUSTOMER SERVICE CENTER.”
Instant Replay (DVD)
This function is used to replay the previous 10
seconds of a movie from the current position.
Instant Skip (DVD)
This function skips playback ahead 10 seconds.
MPEG4
This unit can play MPEG4 formats within an avi file.
HDMI (High Definition Multimedia
Interface)
HDMI reduces picture noise by allowing a pure
digital video/audio signal path from the player to
your TV.
ENG-6
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
Disc Type and Characteristics
This DVD player is capable of playing the following types of discs with the corresponding logos:
Recording Types
Disc Size
Max. Playing Time
Characteristics
Disc Types (Logos)
-
-
DVD contains excellent sound and
video due to Dolby Digital and
MPEG-2 system.
Single-sided 240 min.
Double-sided 480 min.
DVD
12 Cm
Audio
+
Video
Various screen and audio functions
can be easily selected through the
on-screen menu.
Single-sided 80 min.
Double-sided 160 min.
8 Cm
VIDEO-CD
AUDIO-CD
74 min.
20 min.
12 Cm
8 Cm
Audio
+
Video
-
-
Video with CD sound, VHS quality &
MPEG-1 compression technology.
74 min.
20 min.
12 Cm
8 Cm
CD is recorded as a Digital Signal with
better audio quality, less distortion and
less deterioration of audio quality over
time.
Audio
Disc Markings
Region Number
~
Play Region Number
Both the DVD player and the discs are
coded by region. These regional
codes must match in order for the disc
to play. If the codes do not match, the
disc will not play.
PAL broadcast system in U.K, France, Germany, etc.
PAL
Dolby Digital disc
Stereo disc
STEREO
The Region Number for this player
is described on the rear panel of the
player.
DIGITAL
SOUND
Digital Audio disc
DTS disc
MP3 disc
You must only insert one DVD disc at a time.
Inserting two or more discs will not allow
playback and may cause damage to the DVD
player.
DivX Certification
DivX, DivX Certified, and
associated logos are
trademarks of DivXNetworks,
Inc and are used under
license.
ENG-7
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
Description
Front Panel Controls
9
10
EZ VIEW
1
2
3
4
5
6
7
8
1. STANDBY/ON (
)
6. STOP (
)
When the unit is first plugged in, the indicator lights.
Stops disc play.
When STANDBY/ON is pressed on, the indicator goes out
and the player is turned on.
7. REMOTE CONTROL RECEIVER
8. SKIP ( ) / SEARCH
Use to forward skip a scene or music.
2. DISC TRAY
Place the disc here.
9. SKIP ( ) / SEARCH
Use to reverse skip a scene or music.
3. OPEN/CLOSE (
)
Press to open and close the disc tray.
10. PLAY/PAUSE (
Begin or pause disc play.
)
4. DISPLAY
Operation indicators are displayed here.
5. EZ VIEW
The aspect ratio of a picture can easily be adjusted to
your TV's screen size (16:9 or 4:3).
Front Panel Display
1
1. Disc type indicators
2. Play / Pause
2
3
3. Displays various messages
concerning operations such as PLAY,
STOP, LOAD ...
no DISC: No disc loaded.
OPEN: The disc tray is open.
LOAD: Player is loading disc information.
ENG-8
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
Rear Panel
1
2
1
3
4
5
6
7
1. DIGITAL AUDIO OUT JACKS
-
5. S-VIDEO OUT JACK
Use either an optical or coaxial digital cable to connect
to a compatible Dolby Digital receiver.
-
Use the S-Video cable to connect this jack to the
S-Video jack on your television for higher picture
quality.
-
Use either an optical or coaxial digital cable to connect
to an A/V Amplifier that contains a Dolby Digital,
MPEG2 or DTS decoder.
-
The Video Output in Setup Menu must be set to
COMPOSITE/S-VIDEO.
2. COMPONENT VIDEO OUT JACKS
-
6. HDMI OUT JACK
-
Use these jacks if you have a TV with Component
Use the HDMI cable to connect this jack to the HDMI
R
B
Video in jacks. These jacks provide P , P and Y video.
If HDMI/COMPONENT (P-SCAN) Video Output is
selected in Setup Menu, progressive scan mode will
work.
jack on your television for the best quality picture.
If an HDMI cable is connected to an HDMI-compatible
TV, HDMI will be output automatically within 10
seconds.
-
-
-
If COMPONENT (I-SCAN) Video Output is selected in
Setup Menu, interlaced scan mode will work.
-
If you want to use a Video, S-Video or Component
Output, unplug HDMI cable.
3. AUDIO OUT JACKS
Connect to the Audio input jacks of your television or
audio/video receiver
7. SCART JACK
-
Connect to a TV scart input jack.
4. VIDEO OUT JACK
-
Use a video cable to connect to the Video input jack on
your television.
-
The Video Output in Setup Menu must be set to
COMPOSITE/S-VIDEO.
Note
- Consult your TV User’s Manual to find out if your TV supports Progressive Scan (P-SCAN).
If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the
TV’s menu system.
- If HDMI/COMPONENT (P-SCAN) Video Output is selected in Setup Menu, Video and S-Video Outputs do
not work.
- The HDMI output of this unit can be connected to a DVI jack on a TV or other device using a conversion
adapter. In this case, it is necessary to use a TV or display with an HDCP-compatible DVI input.
- There may be no image output if the DVD player is connected to a TV or display that is not compatible with
the above format.
- Refer to the TV's instruction manual for detailed information regarding the HDMI terminal.
- See pages 52 ~ 54 to get more information on how to use the setup menu.
ENG-9
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
Tour of the Remote Control
6. TV/VIDEO Button
Press to display all of the available video sources
( i.e., TV, Cable, Video)
17
1
2
7. SEARCH Buttons (
/
)
Allow you to search forward/backward through a disc.
8. STOP Button (
9. SKIP Buttons (
)
/
)
Use to skip the title, chapter or track.
10. MENU Button
Brings up the DVD player’s menu.
11. RETURN Button
Returns to a previous menu.
12. AUDIO Button
Use this button to access various audio functions on a disc.
13. ZOOM Button
Enlarges DVD picture.
14. VIDEO SEL. Button
18
3
4
19
20
21
5
6
22
Selects Video output format.
15. REPEAT A-B Button
Allows you to repeat play A-B disc.
16. BOOKMARK Button
17. TV POWER Button
Turns the TV’s power on or off.
18. CLEAR Button
Use to remove menus or status displays from the screen.
19. INSTANT SKIP Button
7
8
23
9
24
25
10
11
This function skips playback ahead 10 seconds.
20. INSTANT REPLAY Button
This function is used to replay the previous 10 seconds
of a movie from the current position.
26
21. CH (
Channel selection.
22. OPEN/CLOSE ( ) Button
,
) Buttons
12
27
13
14
15
16
28
29
To open and close the disc tray.
23. PLAY/PAUSE Button (
Begin/Pause disc play.
24. INFO Button
)
30
31
Displays the current disc mode.
25. DISC MENU Button
Brings up the Disc menu.
26. ENTER/…†œ√ Buttons
This button functions as a toggle switch.
27. ANGLE Button
Use to access various camera angles on a DVD.
28. EZ VIEW Button
32
33
The aspect ratio of a picture can easily be adjusted
according to the screen size of your TV (16:9 or 4:3).
29. HDMI SEL. Button
HDMI or DVI Output resolution setup.
30. REPEAT Button
Allows you to repeat play a title, chapter, track, or disc.
31. SUBTITLE Button
32. SHUTTLE DIAL (Search mode)
Performs fast motion play.
33. JOG DIAL (Step mode)
Operates frame by frame play. In CD mode,
performs track search.
1. DVD POWER Button
Turns the power on or off.
2. NUMBER Buttons
3. PROG Button
Allows you to program a specific order.
4. STEP Button
Advances play one frame at a time.
5. VOL (+, -) Buttons
Control volume.
ENG-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
CONNECTIONS
Choosing a Connection
The following shows examples of connections commonly used to connect the DVD player with a TV
and other components.
Before Connecting the DVD Player
- Always turn off the DVD player, TV, and other components before you connect or disconnect any
cables.
- Refer to the user’s manual of the additional components (such as a TV) you are connecting for
more information on those particular components.
Connecting to a TV (SCART)
- Using the SCART, connect the SCART (EXT) terminal on the rear of the DVD Player to the
SCART(IN) terminal of your TV.
- If your TV is not equipped with a SCART you can select one of the following alterative connections:
Connection to a TV (Video CVBS)
1
Using video/audio cables, connect the VIDEO (yellow)/AUDIO
(red and white) OUT terminals on the rear of the DVD player to
the VIDEO (yellow)/AUDIO (red and white) IN terminals of
your TV.
2
Turn on the DVD player and TV.
RED
WHITE
YELLOW
OR
Audio Cable Video Cable
RED
YELLOW
WHITE
3
Press the input selector on your TV remote control until the
Video signal from the DVD player appears on the TV screen.
Note
- Noise may be generated if the audio cable placed too close to the power cable.
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 17 to 18)
- The number and position of terminals may vary depending on your TV set. Please refer to the user's manual
of your TV.
- If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the DVD
player.
- If you press the VIDEO SEL. button when DVD Player is in stop mode or no disc is inserted, the Video
Output mode changes in the following sequence: (COMPOSITE/S-VIDEO ➝ COMPONENT(I-SCAN) ➝
HDMI/COMPONENT(P-SCAN) ➝ SCART RGB ➝ SCART VIDEO)
- When the Video Output in Setup menu is set to HDMI/COMPONENT(P-SCAN), the Video and S-Video
Outputs do not work.
ENG-11
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Connection to a TV (S-Video)
- Connecting to your TV using an S-Video cable.
- You will enjoy high quality images. S-Video separates the picture element into black and white(Y)
and color(C) signals to present clearer images than regular video input mode. (Audio signals are
delivered through the audio output.)
1
Using an S-Video cable (not included), connect the S-VIDEO
OUT terminal on the rear of the DVD player to the
S-VIDEO IN terminal of your TV.
2
Using the audio cables, connect the AUDIO (red and white)
OUT terminals on the rear of the DVD player to the AUDIO (red
and white) IN terminals of your TV.
Turn on the DVD player and TV.
RED
WHITE
3
Press the input selector on your TV remote control until the S-
Video signal from the DVD player appears on your TV screen.
Audio Cable
WHITE
S-Video Cable
(not included)
RED
4
Set the Video Output to COMPOSITE/S-VIDEO in the Display
Setup menu. (See pages 51 to 53)
You can use the VIDEO SEL. button to change the Video
Output mode. (See page 11)
Note
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 17 to 18)
- The number and position of terminals may vary depending on the TV set.
Please refer to the user's manual of your TV.
ENG-12
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Connection to a TV (Interlace)
- Connecting to your TV using Component video cables.
- You will enjoy high quality and accurate color reproduction images. Component video separates
B
R
the picture element into black and white(Y), blue(P ), red(P ) signals to present clear and clean
images. (Audio signals are delivered through the audio output.)
1
Using component video cables (not included), connect the
COMPONENT VIDEO OUT terminals on the rear of the DVD
player to the COMPONENT IN terminals of your TV.
2
RED
BLUE
GREEN
Using the audio cables, connect the AUDIO (red and white)
OUT terminals on the rear of the DVD player to the AUDIO (red
and white) IN terminals of your TV.
Turn on the DVD player and TV.
RED
WHITE
Audio Cable
3
Press the input selector on your TV remote control until the
Component signal from the DVD player appears on the TV
screen.
Component cable
(not included)
RED
WHITE
RED BLUE GREEN
4
Set the Video Output to COMPONENT(I-SCAN) in the Display
Setup menu. (See pages 52 to 54)
You can use the VIDEO SEL. button to change the Video
Output mode. (See page 11)
Note
- If Video output is incorrectly set to S-Video with the Component cables connected, the screen will
turn red.
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 17 to 18)
R
B
- The component terminal of your TV may be marked “R-Y, B-Y, Y” or “Cr, Cb, Y” instead of “P , P , Y”
depending on the manufacturer. The number and position of terminals may vary depending on the TV set.
Please refer to the user's manual of your TV.
ENG-13
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Connection to a TV (Progressive)
1
Using component video cables (not included), connect the
COMPONENT VIDEO OUT terminals on the rear of the DVD
player to the COMPONENT IN terminals of your TV.
2
Using the audio cables, connect the AUDIO (red and white)
OUT terminals on the rear of the DVD player to the AUDIO (red
and white) IN terminals of your TV.
RED
BLUE
GREEN
Turn on the DVD player and TV.
RED
WHITE
3
Audio Cable
Press the input selector on your TV remote control until the
Component signal from the DVD player appears on the TV
screen.
Component cable
(not included)
RED
WHITE RED
BLUE GREEN
4
Set the Video Output to HDMI/COMPONENT(P-SCAN) in the
Display Setup menu. (See pages 52 to 54)
You can use the VIDEO SEL. button to change the Video
Output mode. (See page 11)
To see the progressive video output,
- Consult your TV User’s Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings
in the TV’s menu system.
- Depending on your TV, the connection method may differ from the illustration above.
Note
- What is "Progressive Scan"?
Progressive scan has twice as many scanning lines as the interlace output method.
Progressive scanning method provides better and clearer picture quality.
ENG-14
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Connecting to a TV with DVI Jack
1
Using the HDMI-DVI cable (not included), connect the HDMI
OUT terminal on the rear of the DVD player to the DVI IN
terminal of your TV.
2
Using the audio cables, connect the AUDIO (red and white)
OUT terminals on the rear of the DVD player to the AUDIO
(red and white) IN terminals of your TV. Turn on the DVD
player and TV.
RED
WHITE
Audio Cable
HDMI-DVI cable
(not included)
RED
WHITE
3
Press the input selector on your TV remote control until the DVI
signal from the DVD player appears on your TV screen.
Connecting to a TV with HDMI Jack
1
Using the HDMI-HDMI cable connect the HDMI OUT terminal
on the rear of the DVD player to the HDMI IN terminal of your
TV.
2
Press the input selector on your TV remote control until the
HDMI signal from the DVD player appears on your TV screen.
HDMI cable
HDMI VIDEO Specifications
When you press the HDMI SEL. button, 576p, 720p, 768p, 1080i are selected in order.
The first press of the HDMI SEL. button brings up the current resolution.
The second press allows you to change the HDMI output resolution.
- Depending on your TV, certain HDMI output resolutions may not work.
- Please refer to the user's manual of your TV.
- If HDMI or HDMI-DVI cable is plugged into TV, the DVD player’s output is set to HDMI/DVI within 10 seconds.
- If you set the HDMI output resolution 720p or 1080i, HDMI output provides better picture quality.
ENG-15
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
• HDMI (High Definition Multimedia Interface)
HDMI is an interface to enable the digital transmission of video and audio data with just a single connector.
Using HDMI, the DVD player transmits a digital video and audio signal and displays a vivid picture on a TV
having an HDMI input jack.
• HDMI connection description
HDMI connector - Both uncompressed video data and digital audio data (LPCM or Bit Stream data).
- Though the player uses a HDMI cable, the player outputs only a pure digital signal to the TV.
- If TV does not support HDCP (High-bandwidth Digital content protection), snow noise appears on the
screen.
• Why does Samsung use HDMI?
Analog TVs require an analog video/audio signal. However, when playing a DVD, the data transmitted to a
TV is digital. Therefore either a digital-to-analog converter (in the DVD player) or an analog-to-digital
converter (in the TV) is required. During this conversion, the picture quality is degraded due to noise and
signal loss. DVI technology is superior because it requires no D/A conversion and is a pure digital signal
from the player to your TV.
• What is the HDCP?
HDCP (High-bandwidth Digital Content Protection) is a system for protecting DVD content outputted via
DVI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a
display device (TV, projector . etc). Content is encrypted at the source device to prevent unauthorized
copies from being made.
ENG-16
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Connection to an Audio System (2 Channel Amplifier)
1
Using the audio cables, connect the AUDIO (red and white)
OUT terminals on the rear of the DVD player to the AUDIO (red
and white) IN terminals of the Amplifier.
2
Using the video signal cable(s), connect the VIDEO, S-VIDEO,
COMPONENT or HDMI OUT terminals on the rear of the DVD
player to the VIDEO, S-VIDEO, COMPONENT or DVI IN
terminal of your TV as described on pages 11 to 15.
RED
WHITE
3
Audio Cable
Turn on the DVD player, TV, and Amplifier.
RED
WHITE
2-Channel stereo amp
4
Press the input select button of the Amplifier to select external
input in order to hear sound from the DVD player.
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
Note
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause
damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 50 to 51)
- The position of terminals may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
ENG-17
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)
1
If using an optical cable (not included), connect the DIGITAL
AUDIO OUT (OPTICAL) terminal on the rear of the DVD player
to the DIGITAL AUDIO IN (OPTICAL) terminal of the Amplifier.
If using a coaxial cable (not included), connect the DIGITAL
AUDIO OUT (COAXIAL) terminal on the rear of the DVD player
to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier.
2
Using the video signal cable(s), connect the VIDEO, S-VIDEO,
COMPONENT or HDMI OUT terminals on the rear of the DVD
player to the VIDEO, S-VIDEO, COMPONENT or DVI IN
terminal of your TV as described on pages 11 to 15.
Coaxial Cable
(not included)
or
Optical Cable
(not included)
3
Turn on the DVD player, TV, and Amplifier.
Dolby digital or
DTS amp
4
Press the input select button of the Amplifier to select external
input in order to hear sound from the DVD player.
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
Note
- When you connect the DVD player to DTS Amplifier and play a DTS disc, set the DTS to On in Audio
Setup menu. If it is set to Off, sound will not be heard, or there will be a loud sound.
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause
damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 50 to 51)
- The position of terminals may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
- Please remove the dust coveplug from the Optical Audio Out jack before using the optical cable
(not included) and replace the cover when it's not used.
ENG-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
BASIC FUNCTIONS
Playing a Disc
Before Play
- Turn on your TV and set it to the correct Video Input on the TV's remote control.
- If you connected an external Audio System, turn on your Audio System and set it to the correct
Audio Input.
After plugging in the player, the first time you press the DVD POWER button, this
screen comes up: If you want to select a language, press a NUMBER button.
Press
Touche
1
2
3
4
5
6
for English
(This screen will only appear when you plug in the player for the first time.)
If the language for the startup screen is not set, the settings may change whenever you
turn the power on or off. Therefore, make sure that you select the language you want to
use.
pour Français
für Deutsch
Drücken Sie
Pulsar
para Español
per Italiano
Premere
Druk op
voor Nederlands
Once you select a menu language, you can change it by pressing the
button on the
front panel of the unit for more than 5 seconds with no disc in the unit. Then the
SELECT MENU LANGUAGE window appears again where you can reset your
preferred language.
Playback
1
Press the OPEN/CLOSE
(
) button.
The STANDBY indicator
light goes out and the tray
opens.
2
Place a disc gently into the
tray with the disc’s label
facing up.
RESUME function
3
When you stop disc play, the player remembers
where you stopped, so when you press
PLAY/PAUSE ( ) button again, it will pick up
where you left off. (unless the disc is removed
or the player is unplugged, or if you press the
STOP ( ) button twice.)
Press the PLAY/PAUSE (
button or OPEN/CLOSE (
button to close the disc tray.
)
)
ENG-19
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC FUNCTIONS
Note
4
- If the player is left in the stop mode for more than
one minute without any user interaction, a screen
saver will be activated. Press the PLAY/PAUSE
Stopping Play
Press the STOP ( ) button
during play.
(
) button to resume normal play.
- If the player is left in the stop mode for more than
30 minutes, the power will automatically turn off.
(Automatic Power-Off Function)
5
Removing Disc
Press the OPEN/CLOSE
(
) button.
Screen stops, no sound.
To resume, press the PLAY/PAUSE ( ) button
once again.
6
Pausing Play
Press the PLAY/PAUSE
(
) or STEP button on the
remote control during play.
Note
If the player is left for about 5 minutes in pause
mode, it will stop.
Each time the button is pressed or Jog Dial is
turned, a new frame will appear.
No sound is heard during STEP mode.
Press the PLAY/PAUSE ( ) button to resume
normal play.
You can only perform step motion play in the
forward direction.
7
Step Motion Play (Except
CD)
Turn the JOG DIAL clockwise
or press the STEP button on
the remote control during play.
No sound is heard during slow mode.
Press the PLAY/PAUSE ( ) button to resume
normal play.
8
Slow Motion Play (Except
CD)
Reverse slow motion play will not work.
Press the SEARCH (
)
button to choose the play
speed between 1/8, 1/4 and
1/2 of normal during PAUSE
or STEP mode.
Note
This ( ) icon indicates an invalid button press.
ENG-20
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC FUNCTIONS
Using the Search and Skip Functions
During play, you can search quickly through a chapter or track, and use the skip function to jump to
the next selection.
Searching through a Chapter or Track
During play, press the SEARCH ( or
and press again to search at a faster speed.
)
button
During play, turn the
SHUTTLE DIAL or press
the SEARCH ( or
button on the remote
control for more than 1
second.
DVD 2X, 4X, 64X, 128X
VCD 4X, 8X
)
CD
2X, 4X, 8X
Note
- The speed marked in this function may be
different from the actual playback speed.
- No sound is hearing during search mode
(Except CD).
Skipping Tracks
During play, press the SKIP
(
or
) button.
- When playing a DVD, if you press the SKIP (
)
button, it moves to the next chapter. If you press
the SKIP ( ) button, it moves to the beginning
of the chapter. One more press makes it move to
the beginning of the previous chapter.
- When playing a VCD 2.0 in Menu Off mode, or a
VCD 1.1 or a CD, if you press the SKIP (
)
button, it moves to the next track. If you press
the SKIP ( ) button, it moves to the beginning
of the track. One more press makes it move to
the beginning of the previous track.
- If a track exceeds 15 minutes when playing a
Note
VCD and you press the
button, it moves
When playing VCD 2.0, this function works only
when the Menu is off. Select Menu Off by pressing
the DISC MENU button.
forward 5 minutes. If you press the
it moves backward 5 minutes.
button,
ENG-21
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC FUNCTIONS
Using the Display Function
When Playing a DVD/VCD/CD/MPEG4
You can select Info in the function menu by
pressing the MENU button.
1
During play, press the
INFO button on the remote
control.
DVD
2
Press the …/† buttons to
01
select the desired item.
02
0:00:13
ENG 5.1CH
Off
VCD
When playing VCD 2.0, this function works only
when the Menu is off. Select Menu Off by
pressing the DISC MENU button.
01
0:00:43
CD
01
0:00:48
MPEG4
01
0:00:13
MP3 1/8
None
640x272
ENG-22
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC FUNCTIONS
You may use the number buttons of the remote
control to directly access a title, chapter or to
start the playback from a desired time.
3
Press the œ/√ buttons to
make the desired setup,
then press the ENTER
button.
4
To make the screen
disappear, press the INFO
button again.
Note
To access the desired title when there is more than one in the disc.
For example, if there is more than one movie on a DVD, each movie will be identified.
Most DVD discs are recorded in chapters so that you can quickly find a specific passage (similar to
tracks on an audio CD).
Allows playback of the film from a desired time. You must enter the starting time as a reference.
The time search function does not operate on some discs.
Refers to the film's soundtrack language.
In the example, the soundtrack is played in English 5.1CH.
A DVD disc can have up to eight different soundtracks.
The MP3, AC3 and WMA are supported.(DivX)
Refers to the subtitle languages available in the disc.
You will be able to choose the subtitle languages or, if you prefer, turn them off from the screen.
A DVD disc can have up to 32 different subtitles.
(DivX)
File Size has a relationship with resolution of a title.
The larger file size is, the higher resolution is displayed.
If the file resolution is small, it scales up automatically. So you can see the larger screen.
ENG-23
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC FUNCTIONS
Using the Disc and Title Menu
Using the Disc Menu (DVD)
1
During the playback of a
DVD disc, press the MENU
button on the remote
control.
2
Note
Press the …/† buttons to
Press ENTER key
for Disc Menu
- Depending on a disc, the Disc Menu may not
work.
- You can also use the Disc Menu, using the DISC
MENU button on the remote control.
- In VCD 2.0 the DISC MENU button is used to
select Menu On or Menu Off mode.
select Disc Menu, then
press the √ or ENTER
button.
Using the Title Menu (DVD)
1
During the playback of a
DVD disc, press the MENU
button on the remote
control.
2
Press the …/† buttons to
Press ENTER key
for Title Menu
select Title Menu, then
press the √ or ENTER
button.
Note
- Depending on a disc, the Title Menu may not
work.
- Title Menu will only be displayed if there are at
least two titles in the disc.
ENG-24
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC FUNCTIONS
Using the Function Menu
Using the Function Menu (DVD/VCD)
1
Press the MENU button
during playback.
2
Press the …/† buttons to
Info
Zoom
select Function, then press
the √ or ENTER button.
Bookmark
Repeat
- Info (See pages 22 to 23)
EZ View
- Zoom (See page 36)
- Bookmark
(See pages 34 to 35)
- Repeat (See pages 26 to 27)
- EZ View
(See pages 29 to 30)
You can also directly select these functions
using their respective buttons on the remote
control.
3
Press the …/† buttons to
select one of the five
functions. Then press the
√ or ENTER button to
access the function.
Note
- When playing VCD 2.0, this function works only
when the Menu is off. Select Menu Off by
pressing the DISC MENU button.
ENG-25
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC FUNCTIONS
Repeat Play
Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc.
When playing a DVD/VCD/CD
1
Press the REPEAT button
on the remote control.
Repeat screen appears.
DVD repeats play by chapter or title, CD and
VCD repeat play by disc or track.
DVD
2
Press the œ/√ buttons to
select Chapter, Title or A-B,
then press the ENTER
button.
Chapter ( ): repeats the chapter that is
playing.
Title ( ): repeats the title that is playing.
Disc ( ): repeats the disc that is playing.
Track ( ): repeats the track that is playing.
A-B: repeats a segment of the disc that you
select.
REPEAT ENTER
Off
01
T
01 A-B
VCD/CD
REPEAT ENTER
T
D
Off
01
01 A-B
Using the A-B Repeat function
1. Press the REPEAT A-B button at the point where you want repeat play to start (A).
B is automatically highlighted.
2. Press the REPEAT A-B button at the point where you want the repeat play to stop (B).
- To return to normal play, press the CLEAR button.
Note
A-B REPEAT does not allow you to set point (B) until at least 5 seconds of playback time has
elapsed after point (A) has been set.
DVD
3
To return to normal play,
REPEAT ENTER
Off
01
T
01 A-B
press REPEAT button
again, then press the œ/√
buttons to select Off and
press ENTER button.
Note
- Depending on a disc, the Repeat function may
not work.
VCD/CD
REPEAT ENTER
T
D
Off
01
01 A-B
- When playing VCD 2.0, this function works only
when the Menu is off. Select Menu Off by
pressing the DISC MENU button.
ENG-26
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC FUNCTIONS
Slow Repeat Play
This feature allows you slowly to repeat scenes containing sports, dancing, musical instruments
being played etc., so you can study them more closely.
When playing a DVD/VCD
1
During play, press the
PLAY/PAUSE ( ) button.
2
Press the SEARCH (
)
button to choose the play
speed between 1/8, 1/4 and
1/2 of normal during PAUSE
or STEP mode.
The disc will play from A to B repeatedly at the
speed you chose.
3
Press the REPEAT button
on the remote control.
Press the œ/√ buttons to
select A-B.
To set A-B REPEAT, set (A) first, then set (B)
after the following slow play time has elapsed:
1/8x: wait 40 seconds, then press B
4
Press the ENTER button at
the point where you want
repeat play to start (A).
B is automatically
1/4x: wait 20 seconds, then press B
1/2x: wait 10 seconds, then press B
highlighted. Press the
ENTER button at the point
where you want the repeat
play to stop (B).
5
To return to normal play,
press the CLEAR button and
then press the PLAY/PAUSE
Note
When playing VCD 2.0, this function works only
when the Menu is off. Select Menu Off by pressing
the DISC MENU button.
(
) button.
Using the A-B Repeat function
1. During slow playback, press the REPEAT A-B button at the point where you want repeat play to start
(A). B is automatically highlighted.
2. Press the REPEAT A-B button at the point where you want the repeat play to stop (B).
- To return to normal play, press the CLEAR button and then press the PLAY/PAUSE( ) button.
ENG-27
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC FUNCTIONS
Program Play & Random Play
Program Play (CD)
Program Play allows you to select the order in which you want tracks to play.
1
During play, press the
PROG button.
2
PROGRAM
RANDOM
œ √
Press the œ/√ buttons to
select PROGRAM.
Press the ENTER button.
- To return to the previous menu screen, press
the RETURN button.
- To cancel the selected program order, press
the CLEAR button.
- This unit can support a maximum of 20
programmed tracks.
PROGRAM 01
3
Press the …/†/œ/√ buttons
to select the first track to
add to the program.
Press the ENTER button.
The selection numbers
appear in the Program
Order box.
Track
Program Order
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
01 02 03 04
05 06 07 08
09 10 11 12
13 14 15 16
4
Press the PLAY/PAUSE
(
) button.
The disc will be played in
programmed order.
Random Play (CD)
Random Play plays a disc's tracks in random order.
1
PROGRAM
RANDOM
œ √
Press the PROG button.
Note
- Depending on a disc, the Program and Random
Play functions may not work.
- While in playback mode, press the CLEAR button
on the remote control to cancel Program Play or
Random Play.
2
Press the œ/√ buttons to
select RANDOM.
Press the ENTER button.
ENG-28
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
ADVANCED FUNCTIONS
Adjusting the Aspect Ratio (EZ View)
To play back using aspect ratio (DVD)
Press the EZ VIEW
button.
- The screen size
changes when the
button is pressed
repeatedly.
- The screen zoom mode
operates differently
depending on the screen
setting in the Display
Setup menu.
To make the aspect ratio bar disappear,
press the CLEAR button.
EZ VIEW
WIDE SCREEN
- To ensure correct
operation of the EZ
VIEW button, you should
set the correct aspect
ratio in the Display
Setup menu.
(See pages 51 to 53).
If you are using a 16:9 TV
For 16:9 aspect ratio discs
For 4:3 aspect ratio discs
- WIDE SCREEN
- Normal Wide
Displays the content of the DVD title in 16:9 aspect ratio.
Displays the content of the DVD title in 16:9 aspect ratio.
The picture will look horizontally stretched.
- SCREEN FIT
The top and bottom portions of the screen are cut off. When
playing a 2.35:1 aspect ratio disc, the black bars at the top
and bottom of the screen will disappear. The picture will
look vertically stretched. (Depending on a type of disc, the
black bars may not disappear completely.)
- SCREEN FIT
The top and bottom portions of the screen are cut off and
the full screen appears.
The picture will look vertically stretched.
- ZOOM FIT
- ZOOM FIT
The top, bottom, left and right portions of the screen are cut
off and the central portion of the screen is enlarged.
The top, bottom, left and right of the screen are cut off and
the central portion of the screen is enlarged.
- Vertical Fit
When a 4:3 DVD is viewed on a 16:9 TV, black bars will
appear at the left and right of the screen in order to prevent
the picture from looking horizontally stretched.
ENG-29
Download from Www.Somanuals.com. All Manuals Search And Download.
ADVANCED FUNCTIONS
If you are using a 4:3 TV
For 16:9 aspect ratio discs
For 4:3 aspect ratio discs
- 4:3 Letter Box
- Normal Screen
Displays the content of the DVD title in 16:9 aspect ratio.
The black bars will appear at the top and bottom of the
screen.
Displays the content of the DVD title in 4:3 aspect ratio.
- SCREEN FIT
The top and bottom portions of the screen are cut off and
the full screen appears.
- 4:3 Pan Scan
The left and right portions of the screen are cut off and the
central portion of the 16:9 screen is displayed.
The picture will look vertically stretched.
- ZOOM FIT
- SCREEN FIT
The top and bottom portions of the screen are cut off and a
full screen appears.
The top, bottom, left and right portions of the screen are
cut off and the central portion of the screen is enlarged.
The picture will look vertically stretched.
- ZOOM FIT
The top, bottom, left and right of the screen are cut off and
the central portion of the screen is enlarged.
Note
This function may behave differently depending on the type of disc.
ENG-30
Download from Www.Somanuals.com. All Manuals Search And Download.
ADVANCED FUNCTIONS
Selecting the Audio Language
You can select a desired audio language quickly and easily with the AUDIO button.
Using the AUDIO button (DVD/VCD/CD/MPEG4)
1
Press the AUDIO button.
The Audio changes when
the button is pressed
repeatedly.
- The audio languages
are represented by
abbreviations.
DVD
AUDIO
ENG DOLBY DIGITAL 5.1CH
VCD/CD
When playing a VCD or CD,
AUDIO
Stereo
you can select among
Stereo, Right or Left.
MPEG4
Press the œ/√ buttons to
select the desired Audio on
PCM 1/2
a MPEG4 then press the
ENTER .
2
To remove the AUDIO
icon, press the CLEAR or
RETURN button.
Note
- This function depends on audio languages are
encoded on the disc and may not work.
- A DVD disc can contain up to 8 audio
languages.
- To have the same audio language come up
whenever you play a DVD; Refer to “Using the
Audio Language” on page 47.
ENG-31
Download from Www.Somanuals.com. All Manuals Search And Download.
ADVANCED FUNCTIONS
Selecting the Subtitle Language
You can select a desired subtitle quickly and easily with the SUBTITLE button.
Using the SUBTITLE button (DVD/MPEG4)
1
Press the SUBTITLE
button.
The subtitle changes when
the button is pressed
repeatedly.
The subtitle languages are
represented by
DVD
abbreviations.
Off
SUBTITLE
MPEG4
Press the œ/√ buttons to
select the desired subtitle
language on a MPEG4 then
press the ENTER .
NONE
2
To remove the SUBTITLE
icon, press the CLEAR or
RETURN button.
Note
- Depending on DVDs, you can change the
desired subtitle in the Disc Menu. Press the
DISC MENU button.
- This function depends on what subtitles are
encoded on the disc and may not work on all
DVDs.
- A DVD disc can contain up to 32 subtitle
languages.
- To have the same subtitle language come up
whenever you play a DVD;
Refer to “Using the Subtitle Language” on page
48.
ENG-32
Download from Www.Somanuals.com. All Manuals Search And Download.
ADVANCED FUNCTIONS
Changing the Camera Angle
When a DVD contains multiple angles of a particular scene, you can use the ANGLE
function.
Using the ANGLE button (DVD)
If the disc contains multiple angles, the ANGLE appears on the screen.
1
Press the ANGLE button,
then the ANGLE icon will
appear with the current
angle number and the
number of angles
available.
ANGLE
4/6
2
Press the ANGLE button
repeatedly to select the
desired angle. To remove
Note
the ANGLE icon, press the
If the disc has only one angle, this feature won’t
work. Currently, very few discs have this
feature.
CLEAR or RETURN
button.
Using the Instant Replay/Skip Function
Using the Instant Replay function (DVD)
If you miss a scene, you can see it again using this function.
Press the INSTANT
REPLAY button.
- The current scene
moves backward about
10 seconds, and plays
back.
Using the Instant Skip function (DVD)
Use this function to skip playback about 10 seconds ahead of the current scene.
Press the INSTANT SKIP
button.
- Playback will skip ahead
10 seconds.
Note
Depending on the disc, these functions may not
work.
ENG-33
Download from Www.Somanuals.com. All Manuals Search And Download.
ADVANCED FUNCTIONS
Using the Bookmark Function
This feature lets you bookmark sections of a DVD or VCD (Menu Off mode) so you can quickly find
them at a later time.
Using the Bookmark Function (DVD/VCD)
1
During play, press the
BOOKMARK button on the
remote control.
Using the MENU button.
During play, press the MENU
button on the remote control.
Press the …/† buttons to
select Function, then
Info
press the
button.
√
or ENTER
Zoom
Bookmark
Repeat
EZ View
Press the …/† buttons to
select Bookmark, then
Info
press the
button.
√
or ENTER
Zoom
Bookmark
Repeat
EZ View
2
When you reach the
scene you want to mark,
press the ENTER button.
Up to three scenes may
be marked at a time.
Note
- When playing VCD 2.0, this function works only
when the Menu is off. Select Menu Off by
pressing the DISC MENU button.
- Depending on a disc, the Bookmark function may
not work.
ENG-34
Download from Www.Somanuals.com. All Manuals Search And Download.
ADVANCED FUNCTIONS
Recalling a Marked Scene
1
During play, press the
BOOKMARK button on
the remote control.
2
Press the œ/√ buttons to
select a marked scene.
3
Press the PLAY/PAUSE
(
) button to skip to
the marked scene.
Clearing a Bookmark
1
During play, press the
BOOKMARK button on
the remote control.
2
Press the œ/√ buttons to
select the bookmark
number you want to delete.
3
Press the CLEAR button
to delete a bookmark
number.
ENG-35
Download from Www.Somanuals.com. All Manuals Search And Download.
ADVANCED FUNCTIONS
Using the Zoom Function
Using the Zoom Function (DVD/VCD)
1
During play, press the ZOOM
button on the remote control.
Using the MENU button.
During play or pause mode,
press the MENU button on
the remote control.
Press the …/† buttons to
select Function, then
Info
Zoom
press the
button.
√
or ENTER
Bookmark
Repeat
EZ View
Press the …/† buttons to
select Zoom, then press
Info
the
√
or ENTER button.
Zoom
Bookmark
Repeat
EZ View
During DVD play, press ENTER to zoom in
2X/4X/2X/Normal in order.
2
Press the …/† or œ/√
buttons to select the part
of the screen you want to
zoom in on.
During VCD play, press ENTER to zoom in
2X/Normal in order.
Note
When playing VCD 2.0, this function works only
when the Menu is off. Select Menu Off by pressing
the DISC MENU button.
Press the ENTER button.
ENG-36
Download from Www.Somanuals.com. All Manuals Search And Download.
ADVANCED FUNCTIONS
Clips Menu for MP3/WMA/JPEG/MPEG4
Discs with MP3/WMA/JPEG/MPEG4 contain individual songs and/or pictures that
can be organized into folders as shown below. They are similar to how you use your
computer to put files into different folders.
Open the disc tray.
Off
Place the disc on the tray.
Close the tray.
The tray closes and this
screen displays.
R O O T
R O O T
W M A
J P E G
M P 3
M P E G 4
Parent Folder, Current Folder Folders and Files in
and Peer Folders
Current Folder
-
-
-
: Name of currently playing file.
-
-
-
-
-
-
: MP3 file icon.
: WMA file icon.
: JPEG file icon.
: AVI file icon.
: Current Playback Time.
: Current Playback Mode : There are four
modes. They can be selected in order by
pressing the REPEAT button.
- Off: Normal Playback
: Folder icon.
- Track: Repeats the current track.
- Folder: Repeats the current folder.
- Random: Files in the disc will be played
in random order.
: Current Folder icon.
Folder Selection
The folder can only be selected in the Stop mode.
- To select the Parent Folder
Press the RETURN button to go to the parent folder,
or press the …/† buttons to select “..” and
press ENTER to go to the parent folder.
Root
WMA
JPEG
- To select the Peer Folder
Press the œ/√ buttons to highlight the left window.
Press the …/† buttons to select the desired folder,
then press ENTER.
MP3
Parent Folder
MUSIC
Current Folder
- To select the Sub-Folder
1st
Press the œ/√ buttons to highlight the right window.
Press the …/† buttons to select the desired folder,
then press ENTER.
Sub-Folders
Peer Folders
2nd
SONG FILE 1
SONG FILE 2
SONG FILE 3
MPEG4 FILES
ENG-37
Download from Www.Somanuals.com. All Manuals Search And Download.
ADVANCED FUNCTIONS
MP3/WMA Playback
Off
1
Open the disc tray.
R O O T
R O O T
W M A
Place the disc on the tray.
Close the tray.
J P E G
M P 3
M P E G 4
When a disc that contains both MP3 and
WMA files, only one type will play, not
both.
2
Press the …/† or œ/√
buttons to select a song
file.
Press ENTER to begin
playback of the song file.
Off
00:00:23
B e c a u s e Yo u
R O O T
. .
B e c a u s e Yo u
W M A
C a c t u s
J P E G
M P 3
S a d D a y u
Wo n d e r f u l
M P E G 4
Repeat/Random playback
1
Press the REPEAT button
to change the playback
mode. There are four
modes; Off, Track, Folder
and Random.
- Off: Normal Playback
- Track: Repeats the current song file.
- Folder: Repeats the song files which have the same extension
in the current folder.
- Random: Song files which have the same extension will be
played in random order.
To resume normal play, press the CLEAR button.
ENG-38
Download from Www.Somanuals.com. All Manuals Search And Download.
ADVANCED FUNCTIONS
CD-R MP3/WMA file
When you record MP3 or WMA files on CD-R, please refer
to the following.
- Use a decompression transfer rate of at least 64Kbps
when recording WMA files.
Sound quality with WMA files basically depends on the rate
of compression/decompression you choose.
Getting CD audio sound requires an analog/digital sampling
rate, that is conversion to WMA format, of at least 64Kbps
and up to 192Kbps.
- Your MP3 or WMA files should be ISO 9660 or JOLIET
format.
ISO 9660 format and Joliet MP3 or WMA files are
compatible with Microsoft's DOS and Windows, and with
Apple's Mac. This format is the most widely used.
Conversely, files with decompression rates below 64Kbps
or over 192Kbps will not be played properly.
- When naming your MP3 or WMA files, do not exceed 8
characters, and enter “.mp3, .wma” as the file
extension.
General name format : Title.mp3. or Title.wma. When
composing your title, make sure that you use 8 characters
or less, have no spaces in the name, and avoid the use of
special characters including: (.,/,\,=,+).
- Do not try recording copyright protected MP3 files.
Certain "secured" files are encrypted and code protected to
prevent illegal copying. These files are of the following
types: Windows MediaTM (registered trade mark of Microsoft
Inc) and SDMITM (registered trade mark of The SDMI
Foundation). You cannot copy such files.
- Use a decompression transfer rate of at least 128 Kbps
when recording MP3 files.
- Important:
The above recommendations cannot be taken as a
guarantee that the DVD player will play MP3 recordings, or
as an assurance of sound quality. You should note that
certain technologies and methods for MP3 file recording on
CD-Rs prevent optimal playback of these files on your DVD
player (degraded sound quality and in some cases, inability
of the player to read the files).
Sound quality with MP3 files basically depends on the rate
of compression/decompression you choose. Getting CD
audio sound requires an analog/digital sampling rate, that is
conversion to MP3 format, of at least 128 Kbps and up to
160 Kbps. However, choosing higher rates, like 192
Kbps or more, only rarely give better sound quality.
Conversely, files with decompression rates below 128 Kbps
will not be played properly.
- This unit can play a maximum of 3000 files and 300 folders
per disc.
ENG-39
Download from Www.Somanuals.com. All Manuals Search And Download.
ADVANCED FUNCTIONS
MPEG4 Playback
MPEG4 Play Function
AVI files are used to contain the audio and video data. Only AVI format files with the
“.avi” extensions can be played.
Off
1
Open the disc tray.
R O O T
R O O T
W M A
Place the disc on the tray.
Close the tray.
J P E G
M P 3
M P E G 4
2
Press the …/† or œ/√
buttons to select an avi file
(DivX/XviD), then press the
ENTER button.
Off
R O O T
W M A
. .
J P E G
M P 3
M P E G 4
Repeat Playback
1
Press the REPEAT button
to change playback mode.
There are 4 modes, such
as Off, Folder, Title and
A-B (a distance between
two points appointed by
user).
- Folder : Repeats the AVI files which have the same extension
in the current folder.
- Title : repeats the title that is playing.
- A-B : repeats a segment of the file that you select.
ENG-40
Download from Www.Somanuals.com. All Manuals Search And Download.
ADVANCED FUNCTIONS
MPEG4 Function Description
CD-R AVI file
Function
Description
Reference page
-
This unit can play the following video compression formats
within the AVI file format:
- DivX 3.11 contents
- DivX 4 contents (Based on MPEG4 Simple Profile)
- DivX 5 contents (MPEG4 simple profile plus additional
features such as bi-directional frames. Qpel and GMC are
also supported.)
During play, press the
button, it moves forward
or backward 5 minutes.
or
Skip
or
(
(
)
)
During play, press the SERACH
(
or
) button and press
Search
or
again to search at a faster
speed. Allows you to search
at a faster speed in an AVI
file. (2X, 4X, 8X)
-
- XviD MPEG4 compliant Contents.
Allows you to search at a
slower speed in an AVI file.
(1/8X, 1/4X, 1/2X)
This unit supports all resolutions up to maximum below.
Slow Motion
Play
P 20
Each time the STEP button
is pressed, a new frame will
appear.
DivX3.11 & DivX4 & XviD
Bitrate may fluctuate:
Device may skip decoding 720 x 576 @25fps
the high bitrate portions
and begin decoding again
when Bitrate returns to
normal.
DivX5
Step Motion
Play
P 20
P 36
720 x 480 @30fps
2X/4X/2X/Normal in order
ZOOM
: Maximum bitrate : 4Mbps
- These functions may not work depending on MPEG4 file.
Note
- Some MPEG4 files created on a personal computer may not be play back.
That is why Codec Type, Version and Higher resolution over specification is not supported.
- This unit supports CD-R/RW written in MPEG4 in accordance with the “ISO9660 format”.
ENG-41
Download from Www.Somanuals.com. All Manuals Search And Download.
ADVANCED FUNCTIONS
Picture CD Playback
Off
1
Select the desired folder.
R O O T
R O O T
W M A
J P E G
M P 3
M P E G 4
Off
2
Press the …/† buttons to
select a Picture file in the
clips menu, then press the
ENTER button.
R O O T
W M A
. .
1
2
3
J P E G
M P 3
M P E G 4
3
ENTER RETURN
Note
Press the INFO button to
display the menu.
Press the œ/√ buttons to
select the menu you want
to view, then press the
ENTER button.
- If no buttons on the remote control are pressed
for 10 seconds, the menu will disappear.
- Press the STOP button to return to the clips
menu.
- When playing a Kodak Picture CD, the unit
displays the Photo directly, not the clips menu.
Album Screen
Slide Show
ENTER RETURN
TIMER:
•
: Returns to the Album Screen.
• To see the next six pictures, press the
button.
button.
• To see the previous six pictures, press the
Rotation
•
: The unit enters slide show mode.
:Each time the ENTER button is pressed, the
picture rotates 90 degrees clockwise.
• Before beginning the Slide Show, the picture interval must be
set. Press the œ/√ buttons to select a desired icon, then
press the ENTER button.
Zoom
: Press the …/† or œ/√ buttons to select the
part of the screen you want to zoom in on.
Press the ENTER button. Each time the ENTER
button is pressed, the picture is enlarged up
to 4X. (2X ▼ 4X ▼ 2X ▼ Normal)
•
•
•
: The pictures change automatically with about a 6
second interval.
: The pictures change automatically with
about a 12 second interval.
: The pictures change automatically with
about a 18 second interval.
Note
- Depending on a file size, the amount of time between each picture may be different from the set interval
time.
- If you don’t press any button, the slide show will start automatically in about 10 seconds by default.
ENG-42
Download from Www.Somanuals.com. All Manuals Search And Download.
ADVANCED FUNCTIONS
CD-R JPEG Discs
- Only files with the “.jpg” and “.JPG” extensions can be played.
- If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
- Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
- The name of the JPEG file may not be longer than 8 characters and should contain no blank spaces or special characters
(. / = +).
- Only a consecutively written multi-session disc can be played. If there is a blank segment in the multi-session disc, the disc can
be played only up to the blank segment.
- A maximum of 3000 images can be stored on a single CD.
- Kodak Picture CDs are recommended.
- When playing a Kodak Picture CD, only the JPEG files in the pictures folder can be played.
- Kodak Picture CD: The JPEG files in the pictures folder can be played automatically.
- Konica Picture CD: If you want to see the Picture, select the JPEG files in the clips menu.
- Fuji Picture CD: If you want to see the Picture, select the JPEG files in the clips menu.
- QSS Picture CD: The unit may not play QSS Picture CD.
- If the number of files in 1 Disc is over 3000, only 3000 JPEG files can be played.
- If the number of folders in 1 Disc is over 300, only JPEG files in 300 folders can be played.
ENG-43
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5
CHANGING SETUP MENU
Using the Setup Menu
The Setup menu lets you customize your DVD player by allowing you to select various language
preferences, set up a parental level, even adjust the player to the type of television screen you
have.
1
Language Setup
Audio Setup
√
√
√
√
√
With the unit in Stop
mode, press the MENU
button on the remote
control.
Display Setup
Parental Setup :
DivX(R) Registration
Setup
Press the …/† buttons to
select Setup, then press
the
√
or ENTER button.
Œ
´
ˇ
Language Setup : Setup of the Language.
Audio Setup : Setup of the Audio Options.
Display Setup :Setup of the Display Options. Use to select which type of screen you want to
watch and several display options.
¨
ˆ
Parental Setup : Setup of the Parental Level. Allows users to set the level necessary to prevent
children from viewing unsuitable movies such as those with violence, adult
subject matter, etc.
DivX(R) Registration : Please use the Registration code to register this player with the DivX(R)
2
Press the …/† buttons to
access the different
features. Press the
√
or
ENTER button to access
the sub features.
3
To make the setup screen
disappear after setting up,
press the MENU button
again.
Note
Depending on the disc, some Setup menu
selections may not work.
ENG-44
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING SETUP MENU
Setting Up the Language Features
If you set the player menu, disc menu, audio and subtitle language in advance, they will come up
automatically every time you watch a movie.
Using the Player Menu Language
1
With the unit in Stop
mode, press the MENU
button.
2
Language Setup
Audio Setup
√
√
√
√
√
Press the …/† buttons to
select Setup, then press
the
Display Setup
√
or ENTER button.
Parental Setup :
DivX(R) Registration
Setup
3
Language Setup
Audio Setup
√
√
√
√
√
Press the …/† buttons to
select Language Setup,
then press the
ENTER button.
Display Setup
√
or
Parental Setup :
DivX(R) Registration
Setup
LANGUAGE SETUP
4
Player Menu
Disc Menu
Audio
:
:
:
:
:
English
English
English
Automatic
Western
√
√
√
√
√
Press the …/† buttons to
select Player Menu, then
press the
button.
Subtitle
√
or ENTER
DivX Subtitle
- The language is selected and the screen
returns to Language Setup menu.
PLAYER MENU LANGUAGE
5
Player Menu
English
Press the …/† buttons to
select the desired
- To make the setup menu disappear, press the
MENU button.
Français
Deutsch
Español
Italiano
language, then press the
√
or ENTER button.
Nederlands
ENG-45
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING SETUP MENU
Using the Disc Menu Language
This function changes the text language only on the disc menu screens.
1
With the unit in Stop
mode, press the MENU
button.
2
Language Setup
Audio Setup
√
√
√
√
√
Press the …/† buttons to
select Setup, then press
the
Display Setup
√
or ENTER button.
Parental Setup :
DivX(R) Registration
Setup
3
Language Setup
Audio Setup
√
√
√
√
√
Press the …/† buttons to
select Language Setup,
then press the
ENTER button.
Display Setup
√
or
Parental Setup :
DivX(R) Registration
Setup
LANGUAGE SETUP
4
Player Menu
Disc Menu
Audio
:
:
:
:
:
English
English
English
Automatic
Western
√
√
√
√
√
Press the …/† buttons to
select Disc Menu, then
press the
button.
Subtitle
√
or ENTER
DivX Subtitle
- Select “Others” if the language you want is
not listed.
DISC MENU LANGUAGE
5
English
Français
Deutsch
Español
Italiano
Press the …/† buttons to
select the desired
- If the selected language is not recorded on
the disc, the original pre-recorded language is
selected.
Disc Menu
language, then press the
Nederlands
Others
√
or ENTER button.
- The language is selected and the screen
returns to Language Setup menu.
- To make the setup menu disappear, press the
MENU button.
ENG-46
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING SETUP MENU
Using the Audio Language
1
With the unit in Stop
mode, press the MENU
button.
2
Language Setup
Audio Setup
√
√
√
√
√
Press the …/† buttons to
select Setup, then press
Display Setup
the
√
or ENTER button.
Parental Setup :
DivX(R) Registration
Setup
3
Language Setup
Audio Setup
√
√
√
√
√
Press the …/† buttons to
select Language Setup,
then press the
ENTER button.
Display Setup
√
or
Parental Setup :
DivX(R) Registration
Setup
LANGUAGE SETUP
4
Player Menu
Disc Menu
Audio
:
:
:
:
:
English
English
English
Automatic
Western
√
√
√
√
√
Press the …/† buttons to
select Audio, then press
the
Subtitle
√
or ENTER button.
DivX Subtitle
- Select “Original” if you want the default
soundtrack language to be the original
language the disc is recorded in.
AUDIO LANGUAGE
5
English
Français
Deutsch
Español
Italiano
Nederlands
Original
Others
Press the …/† buttons to
select the desired
Audio
- Select “Others” if the language you want is
not listed.
language, then press the
√
or ENTER button.
- If the selected language is not recorded on
the disc, the original pre-recorded language is
selected.
- The language is selected and the screen
returns to Language Setup menu.
- To make the setup menu disappear, press the
MENU button.
ENG-47
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING SETUP MENU
Using the Subtitle Language
1
With the unit in Stop
mode, press the MENU
button.
2
Language Setup
√
√
√
√
√
Press the …/† buttons to
Audio Setup
select Setup, then press
the
Display Setup
√
or ENTER button.
Parental Setup :
DivX(R) Registration
Setup
3
Language Setup
Audio Setup
√
√
√
√
√
Press the …/† buttons to
select Language Setup,
then press the
ENTER button.
Display Setup
√
or
Parental Setup :
DivX(R) Registration
Setup
LANGUAGE SETUP
4
Player Menu
Disc Menu
Audio
:
:
:
:
:
English
English
English
Automatic
Western
√
√
√
√
√
Press the …/† buttons to
select Subtitle, then press
the
Subtitle
√
or ENTER button.
DivX Subtitle
- Select “Automatic” if you want the subtitle
language to be the same as the language
selected as the audio language.
SUBTITLE LANGUAGE
5
Automatic
English
Français
Deutsch
Español
Italiano
Press the …/† buttons to
select the desired
- Select “Others” if the language you want is
not listed. Some discs may not contain the
language you select as your initial language;
in that case the disc will use its original
language setting.
Subtitle
language, then press the
√
or ENTER button.
Nederlands
Others
- The language is selected and the screen
returns to setup menu.
- To make the setup menu disappear, press the
MENU button.
ENG-48
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING SETUP MENU
Using the DviX Subtitle Language
1
With the unit in Stop
mode, press the MENU
button.
2
Language Setup
√
√
√
√
√
Press the …/† buttons to
Audio Setup
select Setup, then press
the
Display Setup
√
or ENTER button.
Parental Setup :
DivX(R) Registration
Setup
3
Language Setup
Audio Setup
√
√
√
√
√
Press the …/† buttons to
select Language Setup,
then press the
ENTER button.
Display Setup
√
or
Parental Setup :
DivX(R) Registration
Setup
LANGUAGE SETUP
4
Player Menu
Disc Menu
Audio
:
:
:
:
:
English
English
English
Automatic
Western
√
√
√
√
√
Press the …/† buttons to
select DivX Subtitle, then
press the
button.
Subtitle
√
or ENTER
DivX Subtitle
- The language is selected and the screen
returns to setup menu.
DivX SUBTITLE LANGUAGE
5
Press the …/† buttons to
select the desired
- To make the setup menu disappear, press
the MENU button.
Westren
Central
Greek
DivX Subtitle
language, then press the
Cyrillic
√
or ENTER button.
English, Breton, Catalan, Danish, Dutch,
Faroese, Finnish, French, Gaelic, German,
Icelandic, Irish, Italian, Norwegian, Portuguese,
Western
Spanish and Swedish
English, Albanian, Croatian, Czech, Hungarian,
Central
Greek
Cyrillic
Polish, Romanian, Slovak, Slovene and
Serbian(Latin)
English and modern Greek
English, Russian, Bulgarian, Belorussian,
Macedonian, Moldavian, Serbian(Cyrillic),
Ukrainian
ENG-49
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING SETUP MENU
Setting Up the Audio Options
Audio Options allows you to setup the audio device and sound status settings
depending on the audio system in use.
1
With the unit in Stop
mode, press the MENU
button.
2
Language Setup
Audio Setup
√
√
√
√
√
Press the …/† buttons to
select Setup, then press
the
Display Setup
√
or ENTER button.
Parental Setup :
DivX(R) Registration
Setup
3
Language Setup
Audio Setup
√
√
√
√
√
Press the …/† buttons to
select Audio Setup, then
press the
button.
Display Setup
√
or ENTER
Parental Setup :
DivX(R) Registration
Setup
To make the setup menu disappear, press the
MENU button.
AUDIO SETUP
4
Dolby/DTS Digital Out
MPEG-2 Digitla Out
Dynamic Compression
PCM Down Sampling
:
:
:
:
PCM
Press the …/† buttons to
Bitstream
On
select the desired item,
then press the
On
√
or
ENTER button.
ENG-50
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING SETUP MENU
Œ
Dolby/DTS Digital Out
- PCM : Converts to PCM(2CH) audio.
- Bitstream : Outputs Dolby Digital or DTS Bitstream via digital output.
Select Bitstream when connecting to a Dolby Digital and DTS Decoder.
Note
- There is no analog audio output when you play a DTS disc.
´
MPEG-2 Digital Out
- PCM : Converts to PCM(2CH) audio.
- Bitstream : Converts to MPEG-2 Digital Bitstream (5.1CH or 8CH).
Select Bitstream when using the Digital Audio Output.
ˇ
¨
Dynamic Compression
- On : To select dynamic compression.
- Off : To select the standard range.
PCM Down Sampling
- On : Select this when the Amplifier connected to the player is not 96KHz compatible.
In this case, the 96KHz signals will be down converted to 48KHZ.
- Off : Select this when the Amplifier connected to the player is 96KHz compatible.
In this case, all signals will be output without any changes.
Note
Even when PCM Down sampling is Off
- Some discs will only output down sampled audio through the digital outputs.
HDMI
- If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS,
MPEG), you should set Digital Audio to PCM.
- If your TV is not compatible with LPCM sampling rates over 48kHz, you should set PCM
Down sampling to On.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
ENG-51
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING SETUP MENU
Setting Up the Display Options
Display options enable you to set various video functions of the player.
1
With the unit in Stop
mode, press the MENU
button.
2
Language Setup
Audio Setup
√
√
√
√
√
Press the …/† buttons to
select Setup, then press
the
Display Setup
√
or ENTER button.
Parental Setup :
DivX(R) Registration
Setup
3
Language Setup
Audio Setup
√
√
√
√
√
Press the …/† buttons to
select Display Setup,
then press the
ENTER button.
Display Setup
√
or
Parental Setup :
DivX(R) Registration
Setup
To make the setup menu disappear, press the
MENU button.
DISPLAY SETUP
4
TV Aspect
Still Mode
: Wide
: Auto
√
Press the …/† buttons to
Screen Messages : On
select the desired item,
Black Level
TV System
Video Output
HDMI
: Off
then press the
√
or
: PAL
ENTER button.
:
SCART
√
√
: 576p
ENG-52
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING SETUP MENU
ΠTV Aspect
- PAL : In case of using PAL disc
Depending on a type of television you have,
you may want to adjust the screen setting
(aspect ratio).
• If your TV system only has NTSC-Video
input, you must choose “NTSC”.
• If your TV system only has PAL input, you
must choose “PAL ”.
- 4:3 Letter Box : Select when you want to
see the total 16:9 ratio screen DVD
supplies, even though you have a TV with a
4:3 ratio screen. Black bars will appear at
the top and bottom of the screen.
• If you set up the PAL TV system, HDMI
output frame rate is 50 Hz.
Ø Video Output
- 4:3 Pan Scan : Select this for conventional
size TVs when you want to see the central
portion of the 16:9 screen. (Extreme left and
right side of movie picture will be cut off.)
Select Video Output.
- COMPOSITE/S-VIDEO : Select when you
want to use Video and S-Video Out.
- COMPONENT(I-SCAN) : Select when you
want to use Video and Component
525i(Interlace) Out.
- 16:9 Wide : You can view the full 16:9
picture on your wide screen TV.
TV ASPECT
- HDMI/COMPONENT(P-SCAN) : Select
when you want to use Component
525p(Progressive) Out or HDMI.
4:3 Lettre Box
4:3 Pan Scan
16:9 Wide
• If you press the VIDEO SEL. button, Video
output mode is changed in regular
sequence in no disc mode.
(COMPOSITE/S-VIDEO ▼ COMPONENT
(I-SCAN) ▼ HDMI/COMPONENT(P-SCAN)
▼ SCART RGB ▼ SCART VIDEO)
´ Still Mode
These options will help prevent picture shake
in still mode and display small text clearer.
- SCART Output : Select when you want to
use Scart Out.
- Auto : When selecting Auto, Field/Frame
mode will be automatically converted.
• RGB : Select when you want to use
SCART RGB Out.
- Field : Select this feature when the screen
shakes in the Auto mode.
• Video : Select when you want to use
SCART Video Out.
- Frame : Select this feature when you want
to see small letters more clearly in the Auto
mode.
• If the Yes/No selection in the Display Setup
sub Menu is not made within 10 seconds,
the screen returns to the previous menu.
ˇ Screen Messages
DISPLAY SETUP
Use to turn on-screen messages On or Off.
TV Aspect
Still Mode
: Wide
: Auto
√
Screen Messages : On
¨ Black Level
Black Level
TV System
Video Output
HDMI
: Off
Adjusts the brightness of the screen.(On or
Off) It does not function in Progressive mode.
: PAL
:
SCART
√
√
: 576p
ˆ
TV System
- NTSC : In case of using NTSC disc
DISPLAY SETUP
COMPOSITE/S-VIDEO
COMPONENT(I-SCAN)
• If your TV system only has PAL-Video input,
you must choose “PAL”. When you choose
“PAL”, Interlace output format is PAL 60 Hz
output.
HDMI/COMPONENT(P-SCAN)
SCART Output
√
RGB
Video
• If your TV system only has NTSC, input you
must choose “NTSC ”.
• If you set up the NTSC TV system, HDMI
output frame rate is 60 Hz.
ENG-53
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING SETUP MENU
∏ HDMI
- DVI Output
This setting is used when the unit is
connected by HDMI or DVI with Display
devices (TV, projector, etc).
You can use this function to set HDMI to
DVI output format.
- This function corrects a TV screen when it
is not centered to secure a normal view.
- Resolution
- 576p : 720 x 576
- 720p : 1280 x 720
- 768p : 1024 x 768
- 1080i : 1920 x 1080
- Format
- If HDMI to DVI Output is set incorrectly,
the screen can be biased.
HDMI SETUP
Resolution
Format
: 576p
: RGB-Normal
: Level 3
Brightness
This feature can be used to fine-tune the
output ot the DVD-HD850 to your TV or
Monitor for best color reproduction.
You can use this function to set the HDMI
or DVI output's digital data RGB range.
- RGB-Normal : HDMI/DVI Limited range
RGB data output.
• Consult your TV User’s Manual to find
out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow
the TV User’s Manual regarding
Progressive Scan settings in the TV’s
menu system.
- RGB-Expand :HDMI/DVI Full range RGB
data output.
- YCbCr-(4:4:4) : HDMI Limited range
YCbCr-(4:4:4) output.
• If Video Output is set incorrectly, the
screen may be blocked.
• The resolutions available for HDMI output
depend on the connected TV or projector.
For details, see the user’s manual of your
TV or projector.
• When the resolution is changed during
playback, it may take a few seconds for a
normal image to appear.
• If you set the HDMI output resolution 720p
or 1080i, HDMI output provides better
picture quality.
- YCbCr-(4:2:2) : HDMI Limited range
YCbCr-(4:2:2) output.
If you set the HDMI output resolution to
768p, you cannot use the YCbCr format.
Limited range Black/White and color level
are displayed within Limited data range.
ex) When the bit depth is 8 bits
- Y : 16~235
- CbCr : 16~240
Full range Black/White and color level are
displayed within full data range.
ex) When the bit depth is 8 bits
- Y : 0~255
- CbCr : 0~255
- Brightness
You can use this function to set
HDMI/COMPONENT(P-SCAN) output
brightness.
Dark
Bright
Level 1 Level 2 Level 3 Level 4 Level 5
ENG-54
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING SETUP MENU
Setting Up the Parental Control
The Parental Control function works in conjunction with DVDs that have been assigned a rating,
which helps you control the types of DVDs that your family watches.
There are up to 8 rating levels on a disc.
1
With the unit in Stop
mode, press the MENU
button.
2
Language Setup
Audio Setup
√
√
√
√
√
Press the …/† buttons to
select Setup, then press
the
Display Setup
√
or ENTER button.
Parental Setup :
DivX(R) Registration
Setup
3
Language Setup
Audio Setup
√
√
√
√
√
Press the …/† buttons to
select Parental Setup,
then press the
ENTER button.
Display Setup
√
or
Parental Setup :
DivX(R) Registration
Setup
PARENTAL SETUP
: No
4
Use Password
Press the
√
or ENTER
button to select Yes if you
want to use a password.
The Enter Password
screen appears.
To make the setup menu disappear, press the
MENU button.
CREATE PASSWORD
5
Enter your password.
The Re-enter Password
screen appears to confirm
the password. Enter your
password again.
Enter Password
- - - -
The player is locked ( ).
CREATE PASSWORD
Re-enter Password
- - - -
ENG-55
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING SETUP MENU
Setting Up the Rating Level
1
With the unit in Stop
mode, press the MENU
button.
2
Language Setup
√
√
√
√
√
Press the …/† buttons to
Audio Setup
select Setup, then press
the
Display Setup
√
or ENTER button.
Parental Setup :
DivX(R) Registration
Setup
3
Language Setup
Audio Setup
√
√
√
√
√
Press the …/† buttons to
select Parental Setup,
then press the
ENTER button.
Display Setup
√
or
Parental Setup :
DivX(R) Registration
Setup
PASSWORD CHECK
4
Enter your password.
Enter Password
- - - -
PARENTAL SETUP
: Yes
5
Use Password
Rating Level
Press the …/† buttons to
select Rating Level, then
: 8
√
√
Change Password
press the
button.
√
or ENTER
To make the setup menu disappear, press the
MENU button.
RATING LEVEL
6
Level 8 Adult
Level 7
Level 6
Level 5
Level 4
Press the …/† buttons to
select the Rating Level
you want, then press the
For example, if you select up to Level 6, discs
that contain Level 7, 8 will not play.
Level 3
√
or ENTER button.
Level 2
Level 1 Kids Safe
e.g) Setting up in Level 6.
ENG-56
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING SETUP MENU
Changing the Password
1
With the unit in Stop
mode, press the MENU
button.
2
Language Setup
Audio Setup
√
√
√
√
√
Press the …/† buttons to
select Setup, then press
Display Setup
the
√
or ENTER button.
Parental Setup :
DivX(R) Registration
Setup
3
Language Setup
Audio Setup
√
√
√
√
√
Press the …/† buttons to
select Parental Setup,
then press the
ENTER button.
Display Setup
√
or
Parental Setup :
DivX(R) Registration
Setup
The Enter Password
screen appears.
Enter your password.
To make the setup menu disappear, press the
MENU button.
PARENTAL SETUP
: Yes
4
Use Password
Rating Level
Press the …/† button to
select Change
: 8
√
√
Change Password
Password, then press the
√
or ENTER button.
Enter your new password.
Re-enter the new
password again.
CHANGE PASSWORD
Enter New Password
- - - -
CHANGE PASSWORD
Re-enter Password
- - - -
Note
If you have forgotten your password, see
“Forgot Password” in the Troubleshooting Guide.
ENG-57
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6
REFERENCE
Controlling a TV with the Remote control
The remote control can also be set up to control most TVs.
To program the remote control, use the code that corresponds to your brand.
TV Codes
BRAND
CODE
BRAND
NORDMENDE
NOKIA
CODE
ANAM
AIWA
10, 11, 12, 13, 14, 15, 16, 17, 18
72, 73
74
82
BANG&OLUFSEN
BLAUPUNKT
BRANDT
BRIONVEGA
CGE
57
71
73
57
52
75
PANASONIC
PHILIPS
53, 54, 74, 75
06, 55, 56, 57
06, 56, 57
58, 59, 73, 74, 75
06, 56
57
45, 46
74
PHONOLA
PIONEER
RADIOLA
RADIOMARELLI
RCA
CONTINENTAL EDISON
19, 20, 23, 24, 25, 26, 27, 28, 29,
30 , 31, 32, 33, 34
DAEWOO
REX
EMERSON
FERGUSON
FINLUX
FORMENTI
FUJITSU
GRADIENTE
GRUNDIG
HITACHI
IMPERIAL
JVC
64
73
06, 49, 57
57
84
70
49, 52, 71
60, 72, 73, 75
52
61, 79
SABA
57, 72, 73, 74, 75
74
01, 02, 03, 04, 05, 06, 07, 08, 09
41, 42, 43, 44, 48
06
74
36, 37, 38, 39, 48
71
57
57
SALORA
SAMSUNG
SANYO
SCHNEIDER
SELECO
SHARP
SIEMENS
SINGER
SINUDYNE
SONY
LG
06, 19, 20, 21, 22, 78
35, 48
LOEWE
06, 69
06, 57
40
57
TELEAVA
TELEFUNKEN
THOMSON
73
LOEWE OPTA
MAGNAVOX
METZ
67, 73, 75, 76
72, 73, 75
THOMSON ASIA 80, 81
MITSUBISHI
MIVAR
NEC
NEWSAN
NOBLEX
06, 48, 62, 65
52, 77
83
68
66
TOSHIBA
WEGA
YOKO
47, 48, 49, 50, 51, 52
57
06
63
ZENITH
1.Turn on the TV.
2.Point the DVD’s remote control at the TV.
3.While holding the TV POWER button down, enter the code for your brand.
4.If the TV turns off, setup is complete. Enter other codes of the same brand if the
first code does not work.
You can control the TV POWER, CH (
functions of another manufacturer's TV.
,
), VOL (+, -) and TV/VIDEO
-
-
The remote control may not be able to control every model TV of the brands listed.
If you replace the remote control's batteries, set the brand code again.
e.g) For Samsung 2 TVs
While holding down the TV POWER button, enter 0 and then 1.
ENG-58
Download from Www.Somanuals.com. All Manuals Search And Download.
REFERENCE
Firmware upgrade
Introduction
Samsung will often support the software upgrade to improve the performance of this unit to the latest
status, through Samsung Internet Site (www.samsung.com).
Because the specially new mpeg4 codec continues and it is appearing. What improvements are
made depends on the upgrade software you are using as well as the software that your DVD-player
contained before the upgrade.
How to make an upgrade disc
1
You have to download a new file
through Download Center of
Samsung Internet Site
(www.samsung.com).
Note
2
- File System CD-ROM ISO Level
- Character set ISO 9660
- Finalized, single session
- Write speed low
Write the file to Disc using
CD-RW of your computer.
Upgrade procedure
1
Open the disc tray.
Place the disc on the tray.
Close the tray.
The Firmware upgrade
screen appears.
Firmware upgrade
appears on the display
- In the middle of the writing, the tray will open
automatically. After taking out the disc,
please wait for about 2 minutes.
2
Press the œ/√ buttons to
select Total, then press the
ENTER button.
- If the unit was successfully updated, the unit
will turn off and on after closing the tray
automatically. When the unit turns on, this
screen will display.
Firmware upgrade starts
3
Note
Press
Touche
1
2
3
4
5
6
for English
Press the number buttons
to select the desired
language.
pour Français
für Deutsch
- If the “Select Menu Language” doesn't appear,
please contact to “Samsung Service Center”.
- Do not press any button and unplug the power
code during upgrade.
Drücken Sie
Pulsar
para Español
per Italiano
Premere
Druk op
voor Nederlands
- The upgrade procedure may change, refer to
the web site (www.samsung.com).
ENG-59
Download from Www.Somanuals.com. All Manuals Search And Download.
REFERENCE
Troubleshooting
Before requesting service (troubleshooting), please check the following.
Action
Page
Problem
• Check the batteries in the remote control.
They may need replacing.
• Operate the remote control at a distance of no more than 20 feet.
• Remove batteries and hold down one or more buttons for several minutes to
drain the microprocessor inside the remote control to reset it. Reinstall
batteries and try to operate the remote control again.
No operations can be
performed with the
remote control.
P4
P7
Disc does not play.
• Ensure that the disc is installed with the label side facing up.
• Check the region number of the DVD.
• 5.1 channel sound is reproduced only when the following conditions are met. :
1) The DVD player is connected with the proper Amplifier
2) The disc is recorded with 5.1 channel sound.
5.1 channel sound is
not being reproduced.
P18
• Check whether the disc being played has the “5.1 ch” mark on the outside.
• Check if your audio system is connected and working properly.
• In a SETUP Menu, is the Audio Output set to Bitstream?
P50~51
• The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
The
icon appears
on screen.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is out of range.
Disc Menu doesn’t appear.
• Check if the disc has a Menu.
Play mode differs from
the Setup Menu
selection.
• Some of the functions selected in the Setup Menu may not work properly if the
disc is not encoded with the corresponding function.
P44~55
P52~53
P50~51
The screen ratio
cannot be changed.
• The Screen Ratio is fixed on your DVDs.
• Make sure you have selected the correct Digital Output in the Audio Options
Menu.
No audio.
The screen is blocked
• Press the
will revert to the factory settings.
button for more than 5 seconds under no disc inside. All settings
P19
• Press the
button for more than 5 seconds under no disc inside.
Forgot password
All settings including the password will revert to the factory settings.
Don't use this unless absolutely necessary.
P55~57
If you experience other
problems.
• Go to the contents and find the section of the instruction book that contains
the explanations regarding the current problem, and follow the procedure once
again.
• If the problem still cannot be solved, please contact your nearest authorized
service center.
• Make sure that the disc is not dirty or scratched.
Clean the disc.
•
The picture is noisy or
distorted
P3
ENG-60
Download from Www.Somanuals.com. All Manuals Search And Download.
REFERENCE
Action
Problem
Page
P15~16
P15~16
No HDMI output.
• Check the Video output is HDMI enabled.
• Check the connection between the TV and the HDMI jack of DVD player.
• See if the TV supports this 576p/720p/768p/1080i DVD player.
• If snow noise appears on the screen, it means that TV does not support
HDCP (High-bandwidth Digital Content Protection).
Abnormal HDMI output
screen.
HDMI output Jidder
• Check your TV system setup correctly.
• The screen Jidder phenomenon may occur when frame rate is converted from
50Hz to 60Hz for 720P/1080i HDMI (High Definition Multimedia Interface)
Output.
P52~54
• Please refer to the user’s manual of your TV.
ENG-61
Download from Www.Somanuals.com. All Manuals Search And Download.
REFERENCE
Specifications
Power Requirements
Power Consumption
Weight
AC 230 V, 50 Hz
12 W
2.3 Kg
General
Dimensions
430mm (W) X 250mm (D) X 49mm (H)
+5°C to +35°C
Operating Temperature Range
Operating Humidity Range
10 % to 75 %
Reading Speed : 3.49 ~ 4.06 m/sec.
Approx. Play Time
DVD
(DIGITAL VERSATILE DISC)
(Single Sided, Single Layer Disc) : 135 min.
CD : 12Cm
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 74 min.
(COMPACT DISC)
Disc
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 20 min.
CD : 8Cm
(COMPACT DISC)
Reading Speed : 4.8 ~ 5.6 m/sec.
VCD : 12Cm
Maximum Play Time : 74 min. (Video + Audio)
1 channel : 1.0 Vp-p (75 Ωload)
Composite Video
R(Red) : 0.7 Vp-p (75 Ωload)
G(Green) : 0.7 Vp-p (75 Ωload)
B(Blue) : 0.7 Vp-p (75 Ωload)
SCART Jack
Composite Video : 1.0 Vp-p (75 Ωload)
Luminance Signal : 1.0 Vp-p (75 Ωload)
Color Signal : 0.3 Vp-p (75 Ωload)
Video
Output
Y : 1.0 Vp-p (75 Ωload)
Pr : 0.70 Vp-p (75 Ωload)
Pb : 0.70 Vp-p (75 Ωload)
Component Video
Luminance Signal : 1.0 Vp-p (75 Ωload)
Chrominance Signal : 0.3 Vp-p (75 Ωload)
S-VIDEO
HDMI
576p, 720p, 768p, 1080i
2 Channel : L(1/L), R(2/R)
L(1/L), R(2/R)
SCART Jack
2 Channel
48 kHz Sampling : 4 Hz to 22 kHz
96 kHz Sampling : 4 Hz to 44 kHz
Audio
*Frequency Response
Output
*S/N Ratio
110 dB
100 dB
0.004 %
*Dynamic Range
*Total Harmonic Distortion
*: Nominal specification
- Samsung Electronics Co., Ltd reserves the right to change the specifications with
out notice.
- Weight and dimensions are approximate.
ENG-62
Download from Www.Somanuals.com. All Manuals Search And Download.
REPUBLIC OF
IRELAND
UNITED KINGDOM
This Samsung product is warranted for the period of twelve (12) months from the original date
of purchase, against defective materials and workmanship. In the event that warranty service
is required, you should return the product to the retailer from whom it was purchased.
However, Samsung Authorised Dealers and Authorised Service Centers in other EC
Countries will comply with the warranty on the terms issued to purchasers in the country
concerned. In case of difficulty, details of our Authorised Service Centers are available from:
Samsung Electronics (U.K.) Ltd.,
Euro Service Centre, Stafford Park 12,
TELFORD, Shropshire TF3 3BJ,
Tel: 0870) 242 0303, Fax: 01952) 297617
▼WARRANTY CONDITIONS
1. The warranty is only valid if, when warranty service is required, the warranty card is fully
and properly completed and is presented with the original invoice or sales slip or
confirmation, and the serial number on the product has not been defaced.
2. Samsung’s obligations are limited to the repair or, at its discretion, replacement of the
product or the defective part.
3. Warranty repairs must be carried out by Authorised Samsung Dealers or Authorised
Service Centers. No re-imbursement will be made for repairs carried out by non Samsung
Dealers and, any such repair work and damage to the products caused by such repair
work will not be covered by this warranty.
4. This product is not considered to be defective in materials nor workmanship by reason that
it requires adaptation in order to conform to national or local technical or safety standards
in force in any Country other than the one for which the product was originally designed
and manufactured. This warranty will not cover, and no re-imbursement will be made for
such adaptation nor any damage which may result.
5. This warranty covers none of the following:
a) Periodic check ups, maintenance and repair or replacement of parts due to normal wear
and tear.
b) Cost relating to transport, removal or installation of the product.
c) Misuse, including the faiure to use this product for its normal purposes or incorrect
installation.
d) Damage caused by Lightning, Water, Fire, Acts of God, War, Public Disturbances,
incorrect mains voltage, improper ventilation or any other cause beyond the control of
Samsung.
6. This warranty is valid for any person who legally acquired possession of the product during
the warranty period.
7. The consumers statutory rights in any applicable national legislation whether against the
retailer arising from the purchase contract or otherwise are not affected by this warranty.
Unless there is national legislation to the contrary, the rights under this warranty are the
consumers sole rights and Samsung, its subsidiaries and distributors shall not be liable for
indirect or consequential loss or any damage to records, compact discs, videos or audio
taper or any other related equipment or material.
SAMSUNG ELECTRONICS (U.K.) LTD.
ENG-63
Download from Www.Somanuals.com. All Manuals Search And Download.
ELECTRONICS
AK68-00631A-00
UK
Download from Www.Somanuals.com. All Manuals Search And Download.
|