Samsung DVD Player DVD HD845 User Guide

DVD Player  
DVD-HD845  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions  
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT  
REMOVE THE COVER(OR BACK).  
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER  
SERVICING TO QUALIFIED SERVICE PERSONNEL.  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
This symbol indicates “dangerous  
voltage” inside the product that  
presents a risk of electric shock or  
personal injury.  
This symbol indicates important  
instructions accompanying the  
product.  
Do not install this equipment in a confined space such as a bookcase or similar unit.  
WARNING : To prevent damage which may result in fire or electric shock hazard, do not expose  
this appliance to rain or moisture.  
CAUTION : DVD PLAYERS USE AN INVISIBLE LASER BEAM WHICH CAN CAUSE  
HAZARDOUS RADIATION EXPOSURE IF DIRECTED.  
BE SURE TO OPERATE PLAYER CORRECTLY AS INSTRUCTED.  
CAUTIONS  
Caution: To prevent electric shock, match wide blade of plug to wide slot, fully insert.  
Attention: Pour éviter les chocs électriques, introduíre la lame la plus large de la fiche dans la borne  
correspondante de la prise et pousser jusqu au fond.  
This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to  
other equipment. To prevent electromagnetic interference with electric appliances, such as radios and  
televisions, use shielded cables and connectors for connections.  
FCC NOTE (for U.S.A):  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to  
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses and can radiate radio frequency  
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to  
radio or television reception, which can be determined by turning the equipment off and on.  
The user is encouraged to try to correct the interference by one or more of the following measures.  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect this equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
This class B digital apparatus meets all requirements of the Canadian Interference --  
Causing Equipment Regulations.  
CLASS 1  
LASER PRODUCT  
KLASSE 1 LASER PRODUKT  
LUOKAN 1 LASER LAITE  
KLASS 1  
LASER APPARAT  
PRODUCTO LÁSER CLASE 1  
ENG-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTION  
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR  
PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN  
HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR  
YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.  
Note:  
This unit can be used only where the power supply is AC 120-240V, 60/50Hz. It cannot be used  
elsewhere.  
This DVD player is designed and manufactured to respond to the Region Management Information.  
If the Region number of a DVD disc does not correspond to the Region number of this DVD player,  
the DVD player cannot play the disc.  
The product unit accompanying this user manual is licensed under certain intellectual property rights  
of certain third parties. In particular, this product is licensed under the following US patents:  
5,991,715, 5,740,317, 4,972,484, 5,214,678, 5,323,396, 5,539,829, 5,606,618, 5,530,655,  
5,777,992, 6,289,308, 5,610,985, 5,481,643, 5,544,247, 5,960,037, 6,023,490, 5,878,080, and  
under US Published Patent Application No. 2001-44713-A1.  
This license is limited to private non-commercial use by end-user consumers for licensed contents.  
No rights are granted for commercial use. The license does not cover any product unit other than this  
product unit and the license does not extend to any unlicensed product unit or process conforming to  
ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this product unit.  
The license only covers the use of this product unit to encode and/or decode audio files conforming  
to the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product  
features or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.  
Handling Cautions  
Before connecting other components to this player, be sure to turn them all off.  
Do not move the player while a disc is being played, or the disc may be scratched or broken, and the players  
internal parts may be damaged.  
Do not put a flower vase filled with water or any small metal objects on the player.  
Be careful not to put your hand into the disc tray.  
Do not place anything other than the disc in the disc tray.  
Exterior interference such as lightning and static electricity can affect normal operation of this player.  
If this occurs, turn the player off and on again with the POWER button, or disconnect and then reconnect the  
AC power cord to the AC power outlet. The player will operate normally.  
Be sure to remove the disc and turn off the player after use.  
Disconnect the AC power cord from the AC outlet when you dont intend to use the player for long  
periods of time.  
Clean the disc by wiping in a straight line from the inside to the outside of the disc.  
Disc Storage  
Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment.  
Do not keep under direct sunlight.  
Keep in a cool ventilated area.  
Store vertically.  
Keep in a clean protection jacket.  
Maintenance of Cabinet  
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.  
Do not use benzene, thinner, or other solvents for cleaning.  
Wipe the cabinet with a soft cloth.  
ENG-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before you start  
Accessories  
Remote  
Control  
Batteries for  
Remote Control  
(AAA Size)  
Users Manual  
Video/Audio  
Cable  
Install Batteries in the Remote control  
1
Open the battery  
cover on the back of  
the remote control.  
2
Insert two AAA batteries.  
Make sure that the  
polarities (+ and -) are  
aligned correctly.  
3
Replace the battery  
cover.  
If the remote control doesnt operate properly:  
- Check the polarity + - of the batteries (Dry-Cell)  
- Check if the batteries are drained.  
- Check if remote control sensor is blocked by obstacles.  
- Check if there is any fluorescent lighting nearby.  
ENG-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Chapter 1: Setup  
General Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Disc Type and Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Tour of the Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Chapter 2: Connections  
Choosing a Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Chapter 3: Basic Functions  
Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
Using the Search and Skip Functions . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Using the Display Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Using the Disc and Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Using the Function Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Slow Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
Program Play & Random Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Chapter 4: Advanced Functions  
Adjusting the Aspect Ratio (EZ View). . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
Selecting the Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Selecting the Subtitle Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Changing the Camera Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Using the Instant Replay/Skip Function . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Using the Bookmark Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Using the Zoom Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
Clips Menu for MP3/WMA/JPEG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38  
Folder Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38  
MP3/WMA Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Picture CD Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41  
Chapter 5: Changing Setup Menu  
Using the Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
Setting up EZ-Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44  
Setting Up the Language Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46  
Setting Up the Audio Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50  
Setting Up the Display Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52  
Setting Up the Parental Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55  
Chapter 6: Reference  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60  
Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61  
ENG-6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1  
SETUP  
General Features  
Note  
Excellent Sound  
- Discs which cannot be played with this  
Dolby Digital, a technology developed by Dolby  
Laboratories, provides crystal clear sound  
reproduction.  
player.  
DVD-ROM  
CD-ROM  
CDI  
DVD-RAM  
CDV  
CVD  
Screen  
Both regular and widescreen(16:9) pictures can be  
viewed.  
Super Audio CD(except CD layer)  
CDGs play audio only, not graphics.  
Slow Motion  
An important scene can be viewed in slow motion.  
- Ability to play back may depend on recording  
conditions.  
Program Play (CD)  
You can program tracks to play in desired order.  
DVD-R, +R  
CD-RW  
DVD+RW, -RW (V mode)  
- The unit may not play certain CD-R, CD-RW  
and DVD-R due to the disc type or recording  
conditions.  
Parental Control (DVD)  
The parental control allows users to set the level  
necessary to prohibit children from viewing harmful  
movies such as those with violence, adult subject  
matter, etc.  
Various On-Screen Menu Functions  
You can select various languages (Audio/Subtitle)  
and screen angles while enjoying movies.  
COPY PROTECTION  
Many DVD discs are encoded with copy  
Progressive Scan  
protection. Because of this, you should only connect  
your DVD player directly to your TV, not to a VCR.  
Connecting to a VCR results in a distorted picture  
from copy-protected DVD discs.  
Progressive scanning creates an improved picture  
with double the scan lines of a conventional  
interlaced picture.  
EZ VIEW (DVD)  
Easy View enables picture adjustment to match your  
TV's screen size (16:9 or 4:3).  
This product incorporates copyright protection  
technology that is protected by methods claims of  
certain U.S. patents and other intellectual property  
rights owned by Macrovision Corporation and other  
rights owners. Use of this copyright protection  
technology must be authorized by Macrovision  
Corporation, and is intended for home and other  
limited viewing uses only unless otherwise authorized  
by Macrovision Corporation. Reverse engineering or  
disassembly is prohibited.  
Digital Photo Viewer (JPEG)  
You can view Digital Photos on your TV.  
Repeat  
You can repeat a song or movie simply by pressing  
the REPEAT button.  
MP3/WMA  
This unit can play discs created from MP3/WMA files.  
PROGRESSIVE SCAN OUTPUTS  
(525p)  
Instant Replay (DVD)  
This function is used to replay the previous 10  
seconds of a movie from the current position.  
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH  
DEFINITION TELEVISION SETS ARE FULLY  
COMPATIBLE WITH THIS PRODUCT AND MAY  
CAUSE ARTIFACTS TO BE DISPLAYED IN THE  
PICTURE, IF 525 PROGRESSIVE SCAN PICTURE  
PROBLEMS OCCUR, IT IS RECOMMENDED THAT  
THE USER SWITCH THE CONNECTION TO THE  
STANDARD DEFINITIONOUTPUT. IF THERE ARE  
QUESTIONS REGARDING YOUR TV SET  
Instant Skip (DVD)  
This function skips playback ahead 10 seconds.  
HDMI (High Definition Multimedia  
Interface)  
HDMI reduces picture noise by allowing a pure  
digital video/audio signal path from the player to  
your TV.  
COMPATIBILITY WITH THIS MODEL 525p DVD  
PLAYER, PLEASE CONTACT SAMSUNG'S  
CUSTOMER SERVICE CENTER.”  
ENG-7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP  
Disc Type and Characteristics  
This DVD player is capable of playing the following types of discs with the corresponding logos:  
Recording Types  
Disc Size  
Max. Playing Time  
Characteristics  
Disc Types (Logos)  
-
-
DVD contains excellent sound and  
video due to Dolby Digital and  
MPEG-2 system.  
Single-sided 240 min.  
Double-sided 480 min.  
DVD  
12 Cm  
Audio  
+
Video  
Various screen and audio functions  
can be easily selected through the  
on-screen menu.  
Single-sided 80 min.  
Double-sided 160 min.  
8 Cm  
VIDEO-CD  
AUDIO-CD  
74 min.  
20 min.  
12 Cm  
8 Cm  
Audio  
+
Video  
-
-
Video with CD sound, VHS quality &  
MPEG-1 compression technology.  
74 min.  
20 min.  
12 Cm  
8 Cm  
CD is recorded as a Digital Signal with  
better audio quality, less distortion and  
less deterioration of audio quality over  
time.  
Audio  
Disc Markings  
Region Number  
~
Play Region Number  
Both the DVD player and the discs are  
coded by region. These regional  
codes must match in order for the disc  
to play. If the codes do not match, the  
disc will not play.  
NTSC broadcast system in U.S.A, Canada, Korea,  
Japan, etc.  
NTSC  
Dolby Digital disc  
Stereo disc  
STEREO  
The Region Number for this player  
is described on the rear panel of the  
player.  
DIGITAL  
SOUND  
Digital Audio disc  
DTS disc  
MP3 disc  
You must only insert one DVD disc at a time.  
Inserting two or more discs will not allow  
playback and may cause damage to the DVD  
player.  
ENG-8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP  
Description  
Front Panel Controls  
9
10  
OPEN/CLOSE  
EZ VIEW  
1
2
3
4
5
6
7
8
1. STANDBY/ON (  
)
6. STOP (  
)
When the unit is first plugged in, the indicator lights.  
Stops disc play.  
When STANDBY/ON is pressed on, the indicator goes out  
and the player is turned on.  
7. REMOTE CONTROL RECEIVER  
8. SKIP ( ) / SEARCH  
Use to forward skip a scene or music.  
2. DISC TRAY  
Place the disc here.  
9. SKIP ( ) / SEARCH  
Use to reverse skip a scene or music.  
3. OPEN/CLOSE (  
)
Press to open and close the disc tray.  
10. PLAY/PAUSE (  
Begin or pause disc play.  
)
4. DISPLAY  
Operation indicators are displayed here.  
5. EZ VIEW  
The aspect ratio of a picture can easily be adjusted to  
your TV's screen size (16:9 or 4:3).  
Front Panel Display  
1
1. Disc type indicators  
2. Play / Pause  
2
3
3. Displays various messages  
concerning operations such as PLAY,  
STOP, LOAD ...  
no DISC: No disc loaded.  
OPEN: The disc tray is open.  
LOAD: Player is loading disc information.  
ENG-9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP  
Rear Panel  
1
2
1
3
4
5
6
1. DIGITAL AUDIO OUT JACKS  
Use either an optical or coaxial digital cable to connect  
to a compatible Dolby Digital receiver.  
-
The Video Output in Setup Menu must be set to  
COMPOSITE/S-VIDEO.  
-
5. S-VIDEO OUT JACK  
-
Use either an optical or coaxial digital cable to connect  
to an A/V Amplifier that contains a Dolby Digital,  
MPEG2 or DTS decoder.  
-
Use the S-Video cable to connect this jack to the  
S-Video jack on your television for higher picture  
quality.  
2. COMPONENT VIDEO OUT JACKS  
-
-
The Video Output in Setup Menu must be set to  
COMPOSITE/S-VIDEO.  
Use these jacks if you have a TV with Component  
R
B
Video in jacks. These jacks provide P , P and Y video.  
If HDMI/COMPONENT(P-SCAN) Video Output is  
selected in Setup Menu, progressive scan mode will  
work.  
6. HDMI OUT JACK  
-
-
Use the HDMI cable to connect this jack to the HDMI  
jack on your television for the best quality picture.  
If an HDMI cable is connected to an HDMI-compatible  
TV, HDMI will be output automatically a maximum of 10  
seconds later.  
-
-
If COMPONENT(I-SCAN) Video Output is selected in  
Setup Menu, interlaced scan mode will work.  
3. AUDIO OUT JACKS  
Connect to the Audio input jacks of your television or  
audio/video receiver  
-
If you want to use the Video, S-Video or Component  
Output, set the output by pressing the Video Sel. button  
on the remote with the unit in Stop or no disc mode, by  
going through the menu (see page 53) or by  
unplugging the HDMI cable.  
4. VIDEO OUT JACK  
Use a video cable to connect to the Video input jack on  
your television.  
-
Note  
- Consult your TV Users Manual to find out if your TV supports Progressive Scan (P-SCAN).  
If Progressive Scan is supported, follow the TV Users Manual regarding Progressive Scan settings in the  
TVs menu system.  
- If HDMI/COMPONENT (P-SCAN) Video Output is selected in Setup Menu, Video and S-Video Outputs do  
not work.  
- The HDMI output of this unit can be connected to a DVI jack on a TV or other device using a conversion  
adapter. In this case, it is necessary to use a TV or display with an HDCP-compatible DVI input.  
- There may be no image output if the DVD player is connected to a TV or display that is not compatible with  
the above format.  
- Refer to the TV's instruction manual for detailed information regarding the HDMI terminal.  
- See pages 52 ~ 54 to get more information on how to use the setup menu.  
ENG-10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP  
Tour of the Remote Control  
1. DVD POWER Button  
Turns the power on or off.  
2. NUMBER Buttons  
11  
1
2
3. PROG Button  
Allows you to program a specific order.  
4. STEP Button  
Advances play one frame at a time.  
5. SEARCH/SKIP Buttons (  
,
)
/
/
Allow you to search forward/backward through a disc.  
Use to skip the title, chapter or track.  
12  
13  
14  
3
4
5
6. STOP Button (  
7. MENU Button  
)
Brings up the DVD players menu.  
8. RETURN Button  
Returns to a previous menu.  
15  
16  
6
7
9. VIDEO SEL. Button  
Selects Video output format.  
17  
8
10. SUBTITLE Button  
11. OPEN/CLOSE ( ) Button  
To open and close the disc tray.  
18  
12. CLEAR Button  
Use to remove menus or status displays from the screen.  
19  
9
13. INSTANT REPLAY Button  
This function is used to replay the previous 10 seconds of a  
movie from the current position.  
20  
21  
22  
10  
14. INSTANT SKIP Button  
This function skips playback ahead 10 seconds.  
15. PLAY/PAUSE Button (  
Begin/Pause disc play.  
)
16. INFO Button  
Displays the current disc mode.  
17. DISC MENU Button  
Brings up the Disc menu.  
18. ENTER/"❷➛❿ Buttons  
This button functions as a toggle switch.  
19. EZ VIEW Button  
The aspect ratio of a picture can easily be adjusted according  
to the screen size of your TV (16:9 or 4:3).  
20. REPEAT Button  
Allows you to repeat play a title, chapter, track, or disc.  
21. ANGLE Button  
Use to access various camera angles on a DVD.  
22. AUDIO Button  
Use this button to access various audio functions on a disc.  
ENG-11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2  
CONNECTIONS  
Choosing a Connection  
The following shows examples of connections commonly used to connect the DVD player with a TV  
and other components.  
Before Connecting the DVD Player  
- Always turn off the DVD player, TV, and other components before you connect or disconnect any  
cables.  
- Refer to the users manual of the additional components (such as a TV) you are connecting for  
more information on those particular components.  
Connection to a TV (Video)  
1
Using video/audio cables, connect the VIDEO (yellow)/AUDIO  
(red and white) OUT terminals on the rear of the DVD player to  
the VIDEO (yellow)/AUDIO (red and white) IN terminals of  
your TV.  
2
Turn on the DVD player and TV.  
3
Press the input selector on your TV remote control until the  
Video signal from the DVD player appears on the TV screen.  
Note  
- Noise may be generated if the audio cable placed too close to the power cable.  
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 18 to 19)  
- The number and position of terminals may vary depending on your TV set. Please refer to the user's manual  
of your TV.  
- If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the DVD  
player.  
- When the Video Output in Setup menu is set to HDMI/COMPONENT(P-SCAN), the Video and S-Video  
Outputs do not work.  
- If you press the VIDEO SEL. button when DVD Player is in stop mode or no disc is inserted, the Video  
Output mode changes in the following sequence: (COMPOSITE/S-VIDEO COMPONENT(I-SCAN) ➝  
HDMI/COMPONENT(P-SCAN)).  
ENG-12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
Connection to a TV (S-Video)  
- Connecting to your TV using an S-Video cable.  
- You will enjoy high quality images. S-Video separates the picture element into black and white(Y)  
and color(C) signals to present clearer images than regular video input mode. (Audio signals are  
delivered through the audio output.)  
1
Using an S-Video cable (not included), connect the S-VIDEO  
OUT terminal on the rear of the DVD player to the  
S-VIDEO IN terminal of your TV.  
2
Using the audio cables, connect the AUDIO (red and white)  
OUT terminals on the rear of the DVD player to the AUDIO (red  
and white) IN terminals of your TV.  
Turn on the DVD player and TV.  
3
Press the input selector on your TV remote control until the S-  
Video signal from the DVD player appears on your TV screen.  
4
Set the Video Output to COMPOSITE/S-VIDEO in the Display  
Setup menu. (See pages 52 to 54)  
You can use the VIDEO SEL. button to change the Video  
Output mode. (See page 12)  
Note  
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 18 to 19)  
- The number and position of terminals may vary depending on the TV set.  
Please refer to the user's manual of your TV.  
ENG-13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
Connection to a TV (Interlace)  
- Connecting to your TV using Component video cables.  
- You will enjoy high quality and accurate color reproduction images. Component video separates  
B
R
the picture element into black and white(Y), blue(P ), red(P ) signals to present clear and clean  
images. (Audio signals are delivered through the audio output.)  
1
Using component video cables (not included), connect the  
COMPONENT VIDEO OUT terminals on the rear of the DVD  
player to the COMPONENT IN terminals of your TV.  
2
Using the audio cables, connect the AUDIO (red and white)  
OUT terminals on the rear of the DVD player to the AUDIO (red  
and white) IN terminals of your TV.  
Turn on the DVD player and TV.  
3
Press the input selector on your TV remote control until the  
Component signal from the DVD player appears on the TV  
screen.  
4
Set the Video Output to COMPONENT(I-SCAN) in the Display  
Setup menu. (See pages 52 to 54)  
You can use the VIDEO SEL. button to change the Video  
Output mode. (See page 12)  
Note  
- If Video output is incorrectly set to S-Video with the Component cables connected, the screen will  
turn red.  
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 18 to 19)  
R
B
- The component terminal of your TV may be marked R-Y, B-Y, Yor Cr, Cb, Yinstead of P , P , Y”  
depending on the manufacturer. The number and position of terminals may vary depending on the TV set.  
Please refer to the user's manual of your TV.  
ENG-14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
Connection to a TV (Progressive)  
1
Using component video cables (not included), connect the  
COMPONENT VIDEO OUT terminals on the rear of the DVD  
player to the COMPONENT IN terminals of your TV.  
2
Using the audio cables, connect the AUDIO (red and white)  
OUT terminals on the rear of the DVD player to the AUDIO (red  
and white) IN terminals of your TV.  
Turn on the DVD player and TV.  
3
Press the input selector on your TV remote control until the  
Component signal from the DVD player appears on the TV  
screen.  
4
Set the Video Output to HDMI/COMPONENT (P-SCAN ) in the  
Display Setup menu. (See pages 52 to 54)  
You can use the VIDEO SEL. button to change the Video  
Output mode. (See page 12)  
To see the progressive video output,  
- Consult your TV Users Manual to find out if your TV supports Progressive Scan. If Progressive  
Scan is supported, follow the TV Users Manual regarding Progressive Scan settings in the TVs  
menu system.  
- Depending on your TV, the connection method may differ from the illustration above.  
Note  
- What is "Progressive Scan"?  
Progressive scan has twice as many scanning lines as the interlace output method.  
Progressive scanning method provides better and clearer picture quality.  
ENG-15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
Connecting to a TV with DVI Jack  
1
Using the HDMI-DVI cable (not included), connect the HDMI  
OUT terminal on the rear of the DVD player to the DVI IN  
terminal of your TV.  
2
Using the audio cables, connect the AUDIO (red and white)  
OUT terminals on the rear of the DVD player to the AUDIO  
(red and white) IN terminals of your TV.  
Turn on the DVD player and TV.  
3
Press the input selector on your TV remote control until the DVI  
signal from the DVD player appears on your TV screen.  
Connecting to a TV with HDMI Jack  
1
Using the HDMI-HDMI cable connect the HDMI OUT terminal  
on the rear of the DVD player to the HDMI IN terminal of your  
TV.  
2
Press the input selector on your TV remote control until the  
HDMI signal from the DVD player appears on your TV screen.  
(Not included)  
Note  
- Depending on your TV, certain HDMI output resolutions may not work.  
- Please refer to the user's manual of your TV.  
- If HDMI or HDMI-DVI cable is plugged into TV, the DVD players output is set to HDMI/DVI within 10 seconds.  
- If you set the HDMI output resolution 720p or 1080i, the picture quality will improve.  
ENG-16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
HDMI (High Definition Multimedia Interface)  
HDMI is an interface to enable the digital transmission of video and audio data with just a single connector.  
Using HDMI, the DVD player transmits a digital video and audio signal and displays a vivid picture on a TV  
having an HDMI input jack.  
HDMI connection description  
HDMI connector - Both uncompressed video data and digital audio data (LPCM or Bit Stream data).  
- Though the player uses a HDMI cable, the player outputs only a pure digital signal to the TV.  
- If TV does not support HDCP (High-bandwidth Digital content protection), snow noise appears on the  
screen.  
Why does Samsung use HDMI?  
Analog TVs require an analog video/audio signal. However, when playing a DVD, the data transmitted to a  
TV is digital. Therefore either a digital-to-analog converter (in the DVD player) or an analog-to-digital  
converter (in the TV) is required. During this conversion, the picture quality is degraded due to noise and  
signal loss. DVI technology is superior because it requires no D/A conversion and is a pure digital signal  
from the player to your TV.  
What is the HDCP?  
HDCP (High-bandwidth Digital Content Protection) is a system for protecting DVD content outputted via  
DVI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a  
display device (TV, projector . etc). Content is encrypted at the source device to prevent unauthorized  
copies from being made.  
ENG-17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
Connection to an Audio System (2 Channel Amplifier)  
1
Using the audio cables, connect the AUDIO (red and white)  
OUT terminals on the rear of the DVD player to the AUDIO (red  
and white) IN terminals of the Amplifier.  
2
Using the video signal cable(s), connect the VIDEO, S-VIDEO,  
COMPONENT or HDMI OUT terminals on the rear of the DVD  
player to the VIDEO, S-VIDEO, COMPONENT or DVI IN  
terminal of your TV as described on pages 12 to 16.  
3
Turn on the DVD player, TV, and Amplifier.  
4
Press the input select button of the Amplifier to select external  
input in order to hear sound from the DVD player.  
Refer to your Amplifier's user manual to set the Amplifier's  
audio input.  
Note  
- Please turn the volume down when you turn on the Amplifier.  
Sudden loud sound may cause damage to the speakers and your ears.  
- Please set the audio in the menu screen according to the Amplifier.(See pages 50 to 51)  
- The position of terminals may vary depending on the Amplifier.  
Please refer to the user's manual of the Amplifier.  
ENG-18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)  
1
If using an optical cable (not included), connect the DIGITAL  
AUDIO OUT (OPTICAL) terminal on the rear of the DVD player  
to the DIGITAL AUDIO IN (OPTICAL) terminal of the Amplifier.  
If using a coaxial cable (not included), connect the DIGITAL  
AUDIO OUT (COAXIAL) terminal on the rear of the DVD player  
to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier.  
2
Using the video signal cable(s), connect the VIDEO, S-VIDEO,  
COMPONENT or HDMI OUT terminals on the rear of the DVD  
player to the VIDEO, S-VIDEO, COMPONENT or DVI IN  
terminals of your TV as described on pages 12 to 16.  
3
Turn on the DVD player, TV, and Amplifier.  
4
Press the input select button of the Amplifier to select external  
input in order to hear sound from the DVD player.  
Refer to your Amplifier's user manual to set the Amplifier's  
audio input.  
Note  
- When you connect the DVD player to DTS Amplifier and play a DTS disc, set the DTS to On in Audio  
Setup menu. If it is set to Off, sound will not be heard, or there will be a loud sound.  
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause  
damage to the speakers and your ears.  
- Please set the audio in the menu screen according to the Amplifier. (See pages 50 to 51)  
- The position of terminals may vary depending on the Amplifier.  
Please refer to the user's manual of the Amplifier.  
- Please remove the dust cover plug from the Optical Audio Outjack before using the optical cable (not  
included) and replace the cover when its not used.  
ENG-19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3  
BASIC FUNCTIONS  
Playing a Disc  
Before Play  
- Turn on your TV and set it to the correct Video Input on the TV's remote control.  
- If you connected an external Audio System, turn on your Audio System and set it to the correct  
Audio Input.  
After plugging in the player, the first time you press the DVD POWER button, this  
screen comes up: If you want to select a language, press a NUMBER button.  
(This screen will only appear when you plug in the player for the first time.)  
If the language for the startup screen is not set, the settings may change whenever you  
turn the power on or off. Therefore, make sure that you select the language you want to  
use.  
Once you select a menu language, you can change it by pressing the  
button on the  
front panel of the unit for more than 5 seconds with no disc in the unit. Then the  
SELECT MENU LANGUAGE window appears again where you can reset your  
preferred language.  
Playback  
1
Press the OPEN/CLOSE  
(
) button.  
The STANDBY indicator  
light goes out and the tray  
opens.  
2
Place a disc gently into the  
tray with the discs label  
facing up.  
RESUME function  
3
When you stop disc play, the player remembers  
where you stopped, so when you press  
PLAY/PAUSE ( ) button again, it will pick up  
where you left off. (unless the disc is removed  
or the player is unplugged, or if you press the  
STOP ( ) button twice.)  
Press the PLAY/PAUSE (  
button or OPEN/CLOSE (  
button to close the disc tray.  
)
)
ENG-20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC FUNCTIONS  
Note  
4
- If the player is left in the stop mode for more than  
one minute without any user interaction, a screen  
saver will be activated. Press the PLAY/PAUSE  
Stopping Play  
Press the STOP ( ) button  
during play.  
(
) button to resume normal play.  
- If the player is left in the stop mode for more than  
30 minutes, the power will automatically turn off.  
(Automatic Power-Off Function)  
5
Removing Disc  
Press the OPEN/CLOSE  
(
) button.  
Screen stops, no sound.  
To resume, press the PLAY/PAUSE ( ) button  
once again.  
6
Pausing Play  
Press the PLAY/PAUSE  
(
) or STEP button on the  
remote control during play.  
Note  
If the player is left for about 5 minutes in pause  
mode, it will stop.  
Each time the button is pressed or Jog Dial is  
turned, a new frame will appear.  
No sound is heard during STEP mode.  
Press the PLAY/PAUSE ( ) button to resume  
normal play.  
You can only perform step motion play in the  
forward direction.  
7
Step Motion Play (Except  
CD)  
Press the STEP button on  
the remote control during play.  
No sound is heard during slow mode.  
Press the PLAY/PAUSE ( ) button to resume  
normal play.  
8
Slow Motion Play (Except  
CD)  
Reverse slow motion play will not work.  
Press the SEARCH (  
)
button to choose the play  
speed between 1/8, 1/4 and  
1/2 of normal during PAUSE  
or STEP mode.  
Note  
This ( ) icon indicates the function is not  
available in the current mode.  
ENG-21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC FUNCTIONS  
Using the Search and Skip Functions  
During play, you can search quickly through a chapter or track, and use the skip function to jump to  
the next selection.  
Searching through a Chapter or Track  
During play, press and hold the SEARCH ( or  
During play, press the  
)
button and press and hold again to search  
SEARCH ( or  
on the remote  
) button  
at a faster speed.  
control for more than 1  
second.  
DVD 2X, 4X, 64X, 128X  
VCD 4X, 8X  
CD  
2X, 4X, 8X  
Note  
- The speed marked in this function may be  
different from the actual playback speed.  
- No sound is hearing during search mode  
(Except Audio CD).  
Skipping Tracks  
During play, press the SKIP  
(
or  
) button.  
- When playing a DVD, if you press the SKIP (  
)
button, it moves to the next chapter. If you press  
the SKIP ( ) button, it moves to the beginning  
of the chapter. One more press makes it move to  
the beginning of the previous chapter.  
- When playing a VCD 2.0 in Menu Off mode, or a  
VCD 1.1 or a CD, if you press the SKIP (  
)
button, it moves to the next track. If you press  
the SKIP ( ) button, it moves to the beginning  
of the track. One more press makes it move to  
the beginning of the previous track.  
Note  
- If a track exceeds 15 minutes when playing a  
When VCD 2.0 is in Menu Off mode only, this  
function works. Select Menu Off by pressing the  
DISC MENU button.  
VCD and you press the  
forward 5 minutes. If you press the  
it moves backward 5 minutes.  
button, it moves  
button,  
ENG-22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC FUNCTIONS  
Using the Display Function  
When Playing a DVD/VCD/CD  
You can select Info in the function menu by  
pressing the MENU button.  
1
During play, press the  
INFO button on the remote  
control.  
DVD  
2
Press the "/buttons to  
DVD  
01  
select the desired item.  
Title  
02  
Chapter  
0:00:13  
Time  
ENG 5.1CH  
Audio  
Off  
Subtitle  
VCD  
When VCD 2.0 is in Menu Off mode only, this  
function works. Select Menu Off by pressing the  
DISC MENU button.  
VCD  
01  
Track  
0:00:48  
Time  
CD  
CD  
01  
Track  
0:00:48  
Time  
You may use the number buttons of the remote  
control to directly access a title, chapter or to  
start the playback from a desired time.  
3
Press the /buttons to  
make the desired setup and  
then press the ENTER  
button.  
ENG-23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC FUNCTIONS  
4
To make the screen  
disappear, press the INFO  
button again.  
Note  
To access the desired title when there is more than one in the disc.  
For example, if there is more than one movie on a DVD, each movie will be identified.  
Title  
Chapter  
Most DVD discs are recorded in chapters so that you can quickly find a specific passage (similar to  
tracks on an audio CD).  
Allows playback of the film from a desired time. You must enter the starting time as a reference.  
The time search function does not operate on some discs.  
Time  
Refers to the film's soundtrack language. In the example, the soundtrack is played in English  
Audio 5.1CH.  
A DVD disc can have up to eight different soundtracks.  
Refers to the subtitle languages available in the disc.  
You will be able to choose the subtitle languages or, if you prefer, turn them off from the screen.  
A DVD disc can have up to 32 different subtitles.  
Subtitle  
ENG-24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC FUNCTIONS  
Using the Disc and Title Menu  
Using the Disc Menu (DVD)  
1
During the playback of a  
DVD disc, press the MENU  
button on the remote  
control.  
Note  
- Depending on a disc, the Disc Menu may not  
work.  
- You can also use the Disc Menu, using the DISC  
MENU button on the remote control.  
- In VCD 2.0 the DISC MENU button is used to  
select Menu On or Menu Off mode.  
2
Press the "/buttons to  
select Disc Menu, then  
press the or ENTER  
button.  
Press ENTER key  
for Disc Menu  
Using the Title Menu (DVD)  
1
During the playback of a  
DVD disc, press the MENU  
button on the remote  
control.  
2
Press the "/buttons to  
Press ENTER key  
for Title Menu  
select Title Menu, then  
press the or ENTER  
button.  
Note  
- Depending on a disc, the Title Menu may not  
work.  
- Title Menu will only be displayed if there are at  
least two titles in the disc.  
ENG-25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC FUNCTIONS  
Using the Function Menu  
Using the Function Menu (DVD/VCD)  
1
Press the MENU button  
during playback.  
2
Press the "/buttons to  
Info  
Zoom  
select Function, then press  
the or ENTER button.  
Bookmark  
Repeat  
- Info (See pages 23 to 24)  
EZ View  
- Zoom (See page 37)  
- Bookmark  
(See pages 35 to 36)  
- Repeat (See pages 27 to 28)  
- EZ View  
(See pages 30 to 31)  
You can also directly select these functions  
using their respective buttons on the remote  
control.  
3
Press the "/buttons to  
select one of the five  
functions. Then press the  
or ENTER button to  
access the function.  
Note  
- For VCD 2.0, this function is available in Menu  
Off mode only. Select Menu Off by pressing the  
DISC MENU button.  
ENG-26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC FUNCTIONS  
Repeat Play  
Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc.  
When playing a DVD/VCD/CD  
1
Press the REPEAT button  
on the remote control.  
Repeat screen appears.  
DVD repeats play by chapter or title, CD and  
VCD repeat play by disc or track.  
DVD  
2
Press the /buttons to  
select Chapter, Title or A-B,  
then press the ENTER  
button.  
Chapter ( ): repeats the chapter that is  
playing.  
REPEAT ENTER  
Off  
01  
01 A - B  
T
Title (  
T
): repeats the title that is playing.  
Disc ( ): repeats the disc that is playing.  
Track ( ): repeats the track that is playing.  
A-B: repeats a segment of the disc that you  
select.  
VCD/CD  
REPEAT ENTER  
Off  
T
01  
D
01 A - B  
Using the A-B Repeat function  
1. Press the REPEAT button on the remote control.  
2. Press the /buttons to Select A-B.  
3. Press the ENTER button at the point where you want repeat play to start (A).  
B is automatically highlighted.  
4. Press the ENTER button at the point where you want the repeat play to stop (B).  
- To return to normal play, press the CLEAR button.  
Note  
A-B REPEAT does not allow you to set point (B) until at least 5 seconds of playback time has  
elapsed after point (A) has been set.  
DVD  
3
To return to normal play,  
REPEAT ENTER  
Off  
01  
01 A - B  
T
press REPEAT button  
again, then press the /❿  
buttons to select Off and  
press ENTER button.  
Note  
- Depending on a disc, the Repeat function may  
not work.  
VCD/CD  
- When VCD 2.0 is in Menu Off mode only, this  
function works. Select Menu Off by pressing the  
DISC MENU button.  
REPEAT ENTER  
Off  
T
01  
D
01 A - B  
ENG-27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC FUNCTIONS  
Slow Repeat Play  
This feature allows you slowly to repeat scenes containing sports, dancing, musical instruments  
being played etc., so you can study them more closely.  
When playing a DVD/VCD  
1
During play, press the  
PLAY/PAUSE ( ) button.  
2
Press the SEARCH (  
)
button to choose the play  
speed between 1/8, 1/4 and  
1/2 of normal during PAUSE  
or STEP mode.  
The disc will play from A to B repeatedly at the  
speed you chose.  
3
Press the REPEAT button  
on the remote control.  
Press the /buttons to  
select A-B.  
To set A-B REPEAT, set (A) first, then set (B)  
after the following slow play time has elapsed:  
1/8x: wait 40 seconds, then press B  
4
Press the ENTER button at  
the point where you want  
repeat play to start (A).  
B is automatically  
1/4x: wait 20 seconds, then press B  
1/2x: wait 10 seconds, then press B  
highlighted. Press the  
ENTER button at the point  
where you want the repeat  
play to stop (B).  
5
To return to normal play,  
press the CLEAR button and  
then press the PLAY/PAUSE  
Note  
When VCD 2.0 is in Menu Off mode only, this  
function works. Select Menu Off by pressing the  
DISC MENU button.  
(
) button.  
ENG-28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC FUNCTIONS  
Program Play & Random Play  
Program Play (Audio CD)  
Program Play allows you to select the order in which you want tracks to play.  
1
During play, press the  
PROG button.  
2
PROGRAM  
RANDOM  
ꢀ❿  
Press the /buttons to  
select PROGRAM.  
Press the ENTER button.  
- To return to the previous menu screen, press  
the RETURN button.  
- To cancel the selected program order, press  
the CLEAR button.  
- This unit can support a maximum of 20  
programmed tracks.  
PROGRAM 01  
3
Press the "///❿  
buttons to select the first  
track to add to the program.  
Press the ENTER button.  
The selection numbers  
appear in the Program  
Order box.  
Track  
Program Order  
- - - - - - - -  
- - - - - - - -  
- - - - - - - -  
- - - - - - - -  
- - - - - - - -  
01 02 03 04  
05 06 07 08  
09 10 11 12  
13 14 15 16  
4
Press the PLAY/PAUSE  
(
) button.  
The disc will be played in  
programmed order.  
Random Play (CD)  
Random Play plays a disc's tracks in random order.  
1
PROGRAM  
RANDOM  
ꢀ❿  
Press the PROG button.  
Note  
- Depending on a disc, the Program and Random  
Play functions may not work.  
- While in playback mode, press the CLEAR button  
on the remote control to cancel Program Play or  
Random Play.  
2
Press the /buttons to  
select RANDOM.  
Press the ENTER button.  
ENG-29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 4  
ADVANCED FUNCTIONS  
Adjusting the Aspect Ratio (EZ View)  
To play back using aspect ratio (DVD)  
Press the EZ VIEW  
button.  
- The screen size  
changes when the  
button is pressed  
repeatedly.  
- The screen zoom mode  
operates differently  
depending on the screen  
setting in the Display  
Setup menu.  
- To ensure correct  
operation of the EZ  
VIEW button, you should  
set the correct aspect  
ratio in the Display  
Setup menu.  
To make the aspect ratio bar disappear,  
press the CLEAR or RETURN button, or  
just wait 5 seconds.  
EZ VIEW  
WIDE SCREEN  
(See pages 52 to 54).  
If you are using a 16:9 TV  
For 16:9 aspect ratio discs  
For 4:3 aspect ratio discs  
- WIDE SCREEN  
- Normal Wide  
Displays the content of the DVD title in 16:9 aspect ratio.  
Displays the content of the DVD title in 16:9 aspect ratio.  
The picture will look horizontally stretched.  
- SCREEN FIT  
The top and bottom portions of the screen are cut off. When  
playing a 2.35:1 aspect ratio disc, the black bars at the top  
and bottom of the screen will disappear. The picture will  
look vertically stretched. (Depending on a type of disc, the  
black bars may not disappear completely.)  
- SCREEN FIT  
The top and bottom portions of the screen are cut off and  
the full screen appears.  
The picture will look vertically stretched.  
- ZOOM FIT  
- ZOOM FIT  
The top, bottom, left and right portions of the screen are cut  
off and the central portion of the screen is enlarged.  
The top, bottom, left and right of the screen are cut off and  
the central portion of the screen is enlarged.  
- Vertical Fit  
When a 4:3 DVD is viewed on a 16:9 TV, black bars will  
appear at the left and right of the screen in order to prevent  
the picture from looking horizontally stretched.  
ENG-30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
If you are using a 4:3 TV  
For 16:9 aspect ratio discs  
For 4:3 aspect ratio discs  
- 4:3 Letter Box  
- Normal Screen  
Displays the content of the DVD title in 16:9 aspect ratio.  
The black bars will appear at the top and bottom of the  
screen.  
Displays the content of the DVD title in 4:3 aspect ratio.  
- SCREEN FIT  
The top and bottom portions of the screen are cut off and  
the full screen appears.  
- 4:3 Pan&Scan  
The left and right portions of the screen are cut off and the  
central portion of the 16:9 screen is displayed.  
The picture will look vertically stretched.  
- ZOOM FIT  
- SCREEN FIT  
The top and bottom portions of the screen are cut off and a  
full screen appears.  
The top, bottom, left and right portions of the screen are cut  
off and the central portion of the screen is enlarged.  
The picture will look vertically stretched.  
- ZOOM FIT  
The top, bottom, left and right of the screen are cut off and  
the central portion of the screen is enlarged.  
Note  
This function may behave differently depending on the type of disc.  
ENG-31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
Selecting the Audio Language  
You can select a desired audio language quickly and easily with the AUDIO button.  
Using the AUDIO button (DVD/VCD/CD)  
1
Press the AUDIO button.  
The Audio changes when  
the button is pressed  
repeatedly.  
- The audio languages  
are represented by  
abbreviations.  
DVD  
AUDIO  
ENG DOLBY DIGITAL 5.1CH  
When playing a VCD or CD,  
you can select among  
Stereo, Right or Left.  
VCD/CD  
AUDIO  
Stereo  
2
To remove the AUDIO  
icon, press the CLEAR or  
RETURN button.  
Note  
- This function depends on audio languages are  
encoded on the disc and may not work.  
- A DVD disc can contain up to 8 audio  
languages.  
- To have the same audio language come up  
whenever you play a DVD; Refer to “Using the  
Audio Language” on page 48.  
ENG-32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
Selecting the Subtitle Language  
You can select a desired subtitle quickly and easily with the SUBTITLE button.  
Using the SUBTITLE button (DVD)  
1
Press the SUBTITLE  
button.  
The subtitle changes when  
the button is pressed  
repeatedly.  
The subtitle languages are  
represented by  
DVD  
abbreviations.  
SUBTITLE  
Off  
2
To remove the SUBTITLE  
icon, press the CLEAR or  
RETURN button.  
Note  
- Depending on DVDs, you have to change the  
desired subtitle in the Disc Menu. Press the  
DISC MENU button.  
- This function depends on what subtitles are  
encoded on the disc and may not work on all  
DVDs.  
- A DVD disc can contain up to 32 subtitle  
languages.  
- To have the same subtitle language come up  
whenever you play a DVD;  
Refer to “Using the Subtitle Language” on page  
49.  
ENG-33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
Changing the Camera Angle  
When a DVD contains multiple angles of a particular scene, you can use the ANGLE  
function.  
Using the ANGLE button (DVD)  
If the disc contains multiple angles, the ANGLE appears on the screen.  
1
Press the ANGLE button,  
then the ANGLE icon will  
appear with the current  
angle number and the  
number of angles  
available.  
ANGLE  
4/6  
2
Press the ANGLE button  
repeatedly to select the  
desired angle. To remove  
Note  
the ANGLE icon, press the  
If the disc has only one angle, this feature won’t  
work. Currently, very few discs have this  
feature.  
CLEAR or RETURN  
button.  
Using the Instant Replay/Skip Function  
Using the Instant Replay function (DVD)  
If you miss a scene, you can see it again using this function.  
Press the INSTANT  
REPLAY button.  
- The current scene  
moves backward about  
10 seconds, and plays  
back.  
Using the Instant Skip function (DVD)  
Use this function to skip playback about 10 seconds ahead of the current scene.  
Press the INSTANT SKIP  
button.  
- Playback will skip ahead  
10 seconds.  
Note  
Depending on the disc, these functions may not  
work.  
ENG-34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
Using the Bookmark Function  
This feature lets you bookmark sections of a DVD or VCD (Menu Off mode) so you can quickly find  
them at a later time.  
Using the Bookmark Function (DVD/VCD)  
1
During play, press the  
MENU button on the  
remote control.  
2
Info  
Press the "/buttons to  
Zoom  
select Function, then  
Bookmark  
Repeat  
press the  
button.  
or ENTER  
EZ View  
3
Info  
Press the "/buttons to  
Zoom  
select Bookmark, then  
Bookmark  
Repeat  
EZ View  
press the  
button.  
or ENTER  
4
When you reach the  
scene you want to mark,  
press the ENTER button.  
Up to three scenes may  
be marked at a time.  
Note  
- When VCD 2.0 is in Menu Off mode only, this  
function works. Select Menu Off by pressing the  
DISC MENU button.  
- Depending on a disc, the Bookmark function may  
not work.  
ENG-35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
Recalling a Marked Scene  
1~3  
The first 1~3 steps are the  
same as those for “Using  
the Bookmark Function”  
on page 35.  
4
Press the /buttons to  
select a marked scene.  
5
Press the PLAY/PAUSE  
(
) button to skip to  
the marked scene.  
Clearing a Bookmark  
1~3  
The first 1~3 steps are the  
same as those for “Using  
the Bookmark Function”  
on page 35.  
4
Press the /buttons to  
select the bookmark  
number you want to delete.  
5
Press the CLEAR button  
to delete a bookmark  
number.  
ENG-36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
Using the Zoom Function  
Using the Zoom Function (DVD/VCD)  
1
During play, press the  
MENU button on the  
remote control.  
2
Info  
Press the "/buttons to  
Zoom  
select Function, then  
Bookmark  
Repeat  
press the  
button.  
or ENTER  
EZ View  
3
Info  
Press the "/buttons to  
Zoom  
select Zoom, then press  
the  
button.  
Bookmark  
Repeat  
EZ View  
or ENTER  
During DVD play, press ENTER to zoom in  
2X/4X/2X/Normal in order.  
4
Press the "/or /❿  
buttons to select the part  
of the screen you want to  
zoom in on.  
During VCD play, press ENTER to zoom in  
2X/Normal in order.  
Press the ENTER button.  
Note  
- For VCD 2.0, this function is available in Menu Off  
mode only. Select Menu Off by pressing the DISC  
MENU button.  
ENG-37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
Clips Menu for MP3/WMA/JPEG  
Discs with MP3/WMA/JPEG contain individual songs and/or pictures that can be  
organized into folders as shown below. They are similar to how you use your  
computer to put files into different folders.  
Open the disc tray.  
O f f  
Place the disc on the tray.  
Close the tray.  
The tray closes and this  
screen displays.  
RO OT  
RO OT  
W M A  
J P E G  
M P 3  
Parent Folder, Current Folder Folders and Files in  
and Peer Folders  
Current Folder  
-
-
-
: Name of currently playing file.  
-
-
-
-
-
: MP3 file icon.  
: WMA file icon.  
: JPEG file icon.  
: Folder icon.  
: Current Playback Time.  
: Current Playback Mode : There are four  
modes. They can be selected in order by  
pressing the REPEAT button.  
- Off: Normal Playback  
: Current Folder icon.  
- Track: Repeats the current track.  
- Folder: Repeats the current folder.  
- Random: Files in the disc will be played  
in random order.  
Folder Selection  
The folder can only be selected in the Stop mode.  
- To select the Parent Folder  
Press the RETURN button to go to the parent folder,  
or press the "/buttons to select “..” and  
press ENTER to go to the parent folder.  
Root  
WMA  
JPEG  
- To select the Peer Folder  
Press the /buttons to highlight the left window.  
Press the "/buttons to select the desired folder,  
then press ENTER.  
MP3  
Parent Folder  
MUSIC  
Current Folder  
Sub-Folders  
- To select the Sub-Folder  
Press the /buttons to highlight the right window.  
Press the "/buttons to select the desired folder,  
then press ENTER.  
1st  
2nd  
SONG FILE 1  
SONG FILE 2  
Peer Folders  
SONG FILE 3  
MPEG4 FILES  
ENG-38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
MP3/WMA Playback  
f  
1
Open the disc tray.  
Place the disc on the tray.  
Close the tray.  
RO OT  
RO OT  
W M A  
J P E G  
M P 3  
When a disc that contains both MP3  
and WMA files, only one type will  
play, not both.  
2
Press the "/or /❿  
buttons to select a song  
file.  
Press ENTER to begin  
playback of the song file.  
f  
00:23  
Bec au s e Yo u  
. .  
RO OT  
M P 3  
B e c a u s e Yo u  
C a c t u s  
W M A  
S a d D ay u  
Wo n d e r f u l  
Repeat/Random playback  
1
Press the REPEAT button  
to change the playback  
mode. There are four  
modes; Off, Track, Folder  
and Random.  
- Off: Normal Playback  
- Track: Repeats the current song file.  
- Folder: Repeats the song files which have the same extension  
in the current folder.  
- Random: Song files which have the same extension will be  
played in random order.  
To resume normal play, press the CLEAR button.  
ENG-39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
CD-R MP3/WMA file  
When you record MP3 or WMA files on CD-R, please refer  
to the following.  
- Use a decompression transfer rate of at least 64Kbps  
when recording WMA files.  
Sound quality with WMA files basically depends on the rate  
of compression/decompression you choose.  
Getting CD audio sound requires an analog/digital sampling  
rate, that is conversion to WMA format, of at least 64Kbps  
and up to 192Kbps.  
- Your MP3 or WMA files should be ISO 9660 or JOLIET  
format.  
ISO 9660 format and Joliet MP3 or WMA files are  
compatible with Microsoft's DOS and Windows, and with  
Apple's Mac. This format is the most widely used.  
Conversely, files with decompression rates below 64Kbps  
or over 192Kbps will not be played properly.  
- When naming your MP3 or WMA files, do not exceed 8  
characters, and enter “.mp3, .wma” as the file  
extension.  
General name format : Title.mp3. or Title.wma. When  
composing your title, make sure that you use 8 characters  
or less, have no spaces in the name, and avoid the use of  
special characters including: (.,/,\,=,+).  
- Do not try recording copyright protected MP3 files.  
Certain "secured" files are encrypted and code protected to  
prevent illegal copying. These files are of the following  
types: Windows MediaTM (registered trade mark of Microsoft  
Inc) and SDMITM (registered trade mark of The SDMI  
Foundation). You cannot copy such files.  
- Use a decompression transfer rate of at least 128 Kbps  
when recording MP3 files.  
- Important:  
The above recommendations cannot be taken as a  
guarantee that the DVD player will play MP3 recordings, or  
as an assurance of sound quality. You should note that  
certain technologies and methods for MP3 file recording on  
CD-Rs prevent optimal playback of these files on your DVD  
player (degraded sound quality and in some cases, inability  
of the player to read the files).  
Sound quality with MP3 files basically depends on the rate  
of compression/decompression you choose. Getting CD  
audio sound requires an analog/digital sampling rate, that is  
conversion to MP3 format, of at least 128 Kbps and up to  
160 Kbps. However, choosing higher rates, like 192  
Kbps or more, only rarely give better sound quality.  
Conversely, files with decompression rates below 128 Kbps  
will not be played properly.  
- This unit can play a maximum of 3000 files and 300 folders  
per disc.  
ENG-40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
Picture CD Playback  
O f f  
1
Select the desired folder.  
RO OT  
RO OT  
W M A  
J P E G  
M P 3  
O f f  
2
Press the "/buttons to  
select a Picture file in the  
clips menu and then press  
the ENTER button.  
RO OT  
W M A  
J P E G  
M P 3  
. .  
1
2
3
3
ENTER RETURN  
Note  
Press the INFO button to  
display the menu.  
Press the /buttons to  
select the menu you want  
to view, then press the  
ENTER button.  
- If no buttons on the remote control are pressed  
for 10 seconds, the menu will disappear.  
- Press the STOP button to return to the clips  
menu.  
- When playing a Kodak Picture CD, the unit  
displays the Photo directly, not the clips menu.  
Album Screen  
Slide Show  
: Returns to the Album Screen.  
ENTER RETURN  
TIMER:  
To see the next six pictures, press the  
button.  
button.  
To see the previous six pictures, press the  
Rotation  
: The unit enters slide show mode.  
:Each time the ENTER button is pressed, the  
picture rotates 90 degrees clockwise.  
Before beginning the Slide Show, the picture interval must be  
set. Press the /buttons to select a desired icon, then  
press the ENTER button.  
Zoom  
: Press the "/or /buttons to select the  
part of the screen you want to zoom in on.  
Press the ENTER button. Each time the ENTER  
button is pressed, the picture is enlarged up  
to 4X. (2X 4X 2X Normal)  
: The pictures change automatically with about a 6  
second interval.  
: The pictures change automatically with  
about a 12 second interval.  
: The pictures change automatically with  
about a 18 second interval.  
Note  
- Depending on a file size, the amount of time between each picture may be different from the set interval  
time.  
- If you dont press any button, the slide show will start automatically in about 10 seconds by default.  
ENG-41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
CD-R JPEG Discs  
- Only files with the .jpgand .JPGextensions can be played.  
- If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.  
- Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.  
- The name of the JPEG file may not be longer than 8 characters and should contain no blank spaces or special characters  
(. / = +).  
- Only a consecutively written multi-session disc can be played. If there is a blank segment in the multi-session disc, the disc can  
be played only up to the blank segment.  
- A maximum of 3000 images can be stored on a single CD.  
- Kodak Picture CDs are recommended.  
- When playing a Kodak Picture CD, only the JPEG files in the pictures folder can be played.  
- Kodak Picture CD: The JPEG files in the pictures folder can be played automatically.  
- Konica Picture CD: If you want to see the Picture, select the JPEG files in the clips menu.  
- Fuji Picture CD: If you want to see the Picture, select the JPEG files in the clips menu.  
- QSS Picture CD: The unit may not play QSS Picture CD.  
- If the number of files in 1 Disc is over 3000, only 3000 JPEG files can be played.  
- If the number of folders in 1 Disc is over 300, only JPEG files in 300 folders can be played.  
ENG-42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5  
CHANGING SETUP MENU  
Using the Setup Menu  
The Setup menu lets you customize your DVD player by allowing you to select various language  
preferences, set up a parental level, even adjust the player to the type of television screen you  
have.  
1
Language Setup  
Audio Setup  
With the unit in Stop  
mode, press the MENU  
button on the remote  
control.  
Display Setup  
Parental Setup :  
EZ Setup  
Setup  
Press the "/buttons to  
select Setup, then press  
the  
or ENTER button.  
Language Setup : Setup of the Language.  
Audio Setup : Setup of the Audio Options.  
Display Setup :Setup of the Display Options. Use to select which type of screen you want to  
watch and several display options.  
Parental Setup : Setup of the Parental Level. Allows users to set the level necessary to prevent  
children from viewing unsuitable movies such as those with violence, adult  
subject matter, etc.  
š EZ Setup : Using the EZ Setup, you can setup PLAYER MENU LANGUAGE, TV Aspect, and  
PCM Down Sampling in a single menu to suit your preference.  
2
Press the "/buttons to  
access the different  
features. Press the  
or  
ENTER button to access  
the sub features.  
3
To make the setup screen  
disappear after setting up,  
press the MENU button  
again.  
Note  
Depending on the disc, some Setup menu  
selections may not work.  
ENG-43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHANGING SETUP MENU  
Setting up EZ-Setup  
Using the EZ Setup, you can setup PLAYER MENU LANGUAGE, TV Aspect, and PCM Down  
Sampling in a single menu to suit your preference.  
1
With the unit in Stop  
mode, press the MENU  
button.  
2
Language Setup  
Audio Setup  
Display Setup  
Parental Setup :  
EZ Setup  
Press the "/buttons to  
select Setup, then press  
the  
or ENTER button.  
Setup  
3
Language Setup  
Audio Setup  
Display Setup  
Parental Setup :  
EZ Setup  
Press the "/buttons to  
select EZ Setup, then  
press the  
button.  
or ENTER  
Setup  
EZ SETUP  
4
EZ Setup start?  
To begin EZ Setup, press  
the "/buttons to select  
Yes, then press the  
Yes  
No  
***Current Settings***  
Player Menu Language : English  
TV Aspect  
: Wide  
: On  
ENTER button.  
PCM Down Sampling  
EZ SETUP  
5
Player Menu Language  
English  
Press the "/buttons to  
select the desired player  
menu language, then  
press the ENTER button.  
Français  
Deutsch  
Español  
Italiano  
Nederlands  
ENG-44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHANGING SETUP MENU  
EZ SETUP  
EZ SETUP  
EZ SETUP  
6
TV Aspect  
Press the "/buttons to  
select the desired TV  
Aspect, then press the  
ENTER button.  
4:3 Letter Box  
4:3 Pan & Scan  
16:9 Wide  
(See page 53)  
7
PCM Down Sampling  
Press the "/buttons to  
select the PCM Down  
Sampling On or Off, then  
press the ENTER button.  
(See page 51)  
Off  
On  
- To exit the setup menu, press the MENU  
button.  
8
Press the ENTER to  
Settings Complete  
finish.  
Press ENTER to Exit  
ENG-45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHANGING SETUP MENU  
Setting Up the Language Features  
If you set the player menu, disc menu, audio and subtitle language in advance, they will come up  
automatically every time you watch a movie.  
Using the Player Menu Language  
1
With the unit in Stop  
mode, press the MENU  
button.  
2
Language Setup  
Audio Setup  
Press the "/buttons to  
select Setup, then press  
Display Setup  
the  
or ENTER button.  
Parental Setup :  
EZ Setup  
Setup  
3
Language Setup  
Audio Setup  
Press the "/buttons to  
select Language Setup,  
then press the  
ENTER button.  
Display Setup  
or  
Parental Setup :  
EZ Setup  
Setup  
LANGUAGE SETUP  
4
Player Menu  
Disc Menu  
Audio  
:
:
:
:
English  
English  
English  
Automatic  
Press the "/buttons to  
select Player Menu, then  
press the  
button.  
Subtitle  
or ENTER  
- The language is selected and the screen  
returns to Language Setup menu.  
PLAYER MENU LANGUAGE  
5
Player Menu  
English  
Press the "/buttons to  
select the desired  
- To exit the setup menu, press the MENU  
button.  
Français  
Deutsch  
Español  
Italiano  
language, then press the  
or ENTER button.  
Nederlands  
ENG-46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHANGING SETUP MENU  
Using the Disc Menu Language  
This function changes the text language only on the disc menu screens.  
1
With the unit in Stop  
mode, press the MENU  
button.  
2
Language Setup  
Audio Setup  
Press the "/buttons to  
select Setup, then press  
Display Setup  
the  
or ENTER button.  
Parental Setup :  
EZ Setup  
Setup  
3
Language Setup  
Audio Setup  
Press the "/buttons to  
select Language Setup,  
then press the  
ENTER button.  
Display Setup  
or  
Parental Setup :  
EZ Setup  
Setup  
LANGUAGE SETUP  
4
Player Menu  
Disc Menu  
Audio  
:
:
:
:
English  
English  
English  
Automatic  
Press the "/buttons  
to select Disc Menu, then  
Subtitle  
press the  
button.  
or ENTER  
- Select Othersif the language you want is  
not listed.  
DISC MENU LANGUAGE  
5
English  
Français  
Deutsch  
Español  
Italiano  
Press the "/buttons to  
select the desired  
- If the selected language is not recorded on  
the disc, the original pre-recorded language is  
selected.  
Disc Menu  
language, then press the  
or ENTER button.  
Nederlands  
Others  
- The language is selected and the screen  
returns to Language Setup menu.  
- To exit the setup menu, press the MENU  
button.  
ENG-47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHANGING SETUP MENU  
Using the Audio Language  
1
With the unit in Stop  
mode, press the MENU  
button.  
2
Language Setup  
Audio Setup  
Press the "/buttons to  
select Setup, then press  
Display Setup  
the  
or ENTER button.  
Parental Setup :  
EZ Setup  
Setup  
3
Language Setup  
Audio Setup  
Press the "/buttons to  
select Language Setup,  
then press the  
ENTER button.  
Display Setup  
or  
Parental Setup :  
EZ Setup  
Setup  
LANGUAGE SETUP  
4
Player Menu  
Disc Menu  
Audio  
:
:
:
:
English  
English  
English  
Automatic  
Press the "/buttons to  
select Audio, then press  
Subtitle  
the  
or ENTER button.  
- Select Originalif you want the default  
soundtrack language to be the original  
language the disc is recorded in.  
AUDIO LANGUAGE  
5
English  
Français  
Deutsch  
Español  
Italiano  
Nederlands  
Original  
Others  
Press the "/buttons to  
select the desired  
Audio  
- Select Othersif the language you want is  
not listed.  
language, then press the  
or ENTER button.  
- If the selected language is not recorded on  
the disc, the original pre-recorded language is  
selected.  
- The language is selected and the screen  
returns to Language Setup menu.  
- To exit the setup menu, press the MENU  
button.  
ENG-48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHANGING SETUP MENU  
Using the Subtitle Language  
1
With the unit in Stop  
mode, press the MENU  
button.  
2
Language Setup  
Press the "/buttons to  
Audio Setup  
select Setup, then press  
the  
Display Setup  
or ENTER button.  
Parental Setup :  
EZ Setup  
Setup  
3
Language Setup  
Audio Setup  
Press the "/buttons to  
select Language Setup,  
then press the  
ENTER button.  
Display Setup  
or  
Parental Setup :  
EZ Setup  
Setup  
LANGUAGE SETUP  
4
Player Menu  
Disc Menu  
Audio  
:
:
:
:
English  
English  
English  
Automatic  
Press the "/buttons to  
select Subtitle, then press  
Subtitle  
the  
or ENTER button.  
- Select Automaticif you want the subtitle  
language to be the same as the language  
selected as the audio language.  
SUBTITLE LANGUAGE  
5
Automatic  
English  
Français  
Deutsch  
Español  
Italiano  
Press the "/buttons to  
select the desired  
- Select Othersif the language you want is  
not listed. Some discs may not contain the  
language you select as your initial language;  
in that case the disc will use its original  
language setting.  
Subtitle  
language, then press the  
or ENTER button.  
Nederlands  
Others  
- The language is selected and the screen  
returns to setup menu.  
- To exit the setup menu, press the MENU  
button.  
ENG-49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHANGING SETUP MENU  
Setting Up the Audio Options  
Audio Options allows you to setup the audio device and sound status settings  
depending on the audio system in use.  
1
With the unit in Stop  
mode, press the MENU  
button.  
2
Language Setup  
Audio Setup  
Press the "/buttons to  
select Setup, then press  
Display Setup  
the  
or ENTER button.  
Parental Setup :  
EZ Setup  
Setup  
3
Language Setup  
Audio Setup  
Press the "/buttons to  
select Audio Setup, then  
press the  
button.  
Display Setup  
or ENTER  
Parental Setup :  
EZ Setup  
Setup  
- To exit the setup menu, press the MENU  
button.  
AUDIO SETUP  
4
Dolby/DTS Digital Out  
Dynamic Compression  
PCM Down Sampling  
:
:
:
PCM  
On  
Press the "/buttons to  
On  
select the desired item,  
then press the  
or  
ENTER button.  
ENG-50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHANGING SETUP MENU  
Dolby/DTS Digital Out  
- PCM : Converts to PCM(2CH) audio.  
- Bitstream : Outputs Dolby Digital or DTS Bitstream via digital output.  
Select Bitstream when connecting to a Dolby Digital and DTS Decoder.  
Note  
There is no analog audio output when you play a DTS disc.  
Dynamic Compression  
- On : To select dynamic compression.  
- Off : To select the standard range.  
PCM Down Sampling  
- On : Select this when the Amplifier connected to the player is not 96KHz compatible.  
In this case, the 96KHz signals will be down converted to 48KHZ.  
- Off : Select this when the Amplifier connected to the player is 96KHz compatible. In this case,  
all signals will be output without any changes.  
Note  
Even when PCM Down sampling is Off, some discs will only output down sampled audio through  
the digital outputs.  
HDMI  
- If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS,  
MPEG), you should set Digital Audio to PCM.  
- If your TV is not compatible with LPCM sampling rates over 48kHz, you should set PCM  
Down sampling to On.  
Note  
To exit the setup menu, press the MENU button.  
Manufactured under license from Dolby Laboratories. Dolbyand the double-D symbol are  
trademarks of Dolby Laboratories.  
DTSand DTS Digital Outare trademarks of Digital Theater Systems, Inc.  
ENG-51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHANGING SETUP MENU  
Setting Up the Display Options  
Display options enable you to set various video functions of the player.  
1
With the unit in Stop  
mode, press the MENU  
button.  
2
Language Setup  
Audio Setup  
Press the "/buttons to  
select Setup, then press  
the  
Display Setup  
or ENTER button.  
Parental Setup :  
EZ Setup  
Setup  
3
Language Setup  
Audio Setup  
Press the "/buttons to  
select Display Setup,  
then press the  
ENTER button.  
Display Setup  
or  
Parental Setup :  
EZ Setup  
Setup  
To exit the setup menu, press the MENU  
button.  
DISPLAY SETUP  
: Wide  
4
TV Aspect  
Press the "/buttons to  
Still Mode  
: Auto  
: On  
select the desired item,  
then press the  
ENTER button.  
Screen Messages  
Video Output  
: COMPOSIT/S-VID  
or  
HDMI  
: 480p  
Picture Quality  
ENG-52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHANGING SETUP MENU  
TV Aspect  
Video Output  
Depending on a type of television you have,  
you may want to adjust the screen setting  
(aspect ratio).  
Select Video Output.  
- COMPOSITE/S-VIDEO : Select when you  
want to use Video and S-Video Out.  
- 4:3 Letter Box : Select when you want to  
see the total 16:9 ratio screen DVD  
supplies, even though you have a TV with a  
4:3 ratio screen. Black bars will appear at  
the top and bottom of the screen.  
- 4:3 Pan&Scan : Select this for conventional  
size TVs when you want to see the central  
portion of the 16:9 screen. (Extreme left and  
right side of movie picture will be cut off.)  
- 16:9 Wide : You can view the full 16:9  
picture on your wide screen TV.  
- COMPONENT(I-SCAN) : Select when you  
want to use Video and Component  
525i(Interlace) Out.  
- HDMI / COMPONENT(P-SCAN) : Select  
when you want to use Component  
525p(Progressive) Out or HDMI.  
If the Yes/No selection in the Display Setup  
sub Menu is not made within 10 seconds,  
the screen returns to the previous menu.  
DISPLAY SETUP  
TV Aspect  
: Wide  
: Auto  
: On  
TV ASPECT  
Still Mode  
Screen Messages  
Video Output  
4:3 Letter Box  
4:3 Pan&Scan  
16:9 Wide  
: COMPOSIT/S-VID❿  
HDMI  
: 480p  
Picture Quality  
DISPLAY SETUP  
COMPOSITE/S-VIDEO  
COMPONENT (I-SCAN)  
Still Mode  
HDMI/COMPONENT(P-SCAN)  
These options will help prevent picture shake  
in still mode and display small text clearer.  
- Auto : When selecting Auto, Field/Frame  
mode will be automatically converted.  
- Field : Select this feature when the screen  
shakes in the Auto mode.  
- Frame : Select this feature when you want  
to see small letters more clearly in the Auto  
mode.  
Note  
You can press the VIDEO SEL. button  
(with the unit in Stop or no disc mode) to  
select the video output. The video output  
mode is changed in the following  
sequence.  
(COMPOSITE/S-Video COMPONENT  
(I-SCAN) HDMI/COMPONENT(P-SCAN))  
Screen Messages  
Use to turn on-screen messages On or Off.  
ENG-53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHANGING SETUP MENU  
HDMI  
- DVI Output  
This setting is used when the unit is  
connected by HDMI or DVI with Display  
devices (TV, projector, etc).  
You can use this function to set HDMI to  
DVI output format.  
When the HDMI to DVI cable is plugged into  
a TV, you can select either Mode A or mode  
B to set up the DVI output.  
- This function corrects a TV screen when it  
is not centered to secure a normal view.  
- If HDMI to DVI Output is set incorrectly,  
the screen can be biased.  
- Resolution Setting  
- Auto : Resolution setting automatically  
- Manual : Resolution setting manually  
- Resolution  
- 480p : 720 x 480  
- 720p : 1280 x 720  
- 768p : 1024 x 768  
- 1080i : 1920 x 1080  
- Format  
Picture Quality  
- Black Level : Adjusts the brightness of the  
screen.(On or Off) It does not operate in  
Progressive scan mode.  
You can use this function to set HDMI or  
DVI output digital data RGB range.  
- RGB-Normal : HDMI/DVI Limited range  
RGB data output.  
- RGB-Expand :HDMI/DVI Full range RGB  
data output.  
- YCbCr-(4:4:4) : HDMI Limited range  
YCbCr-(4:4:4) output.  
- Sharpness : Level 1 ~ Level 5  
- Brightness : Level 1 ~ Level 5  
- Color Saturation : Level 1 ~ Level 5  
Picture Quality  
Black Level  
Sharpness  
: Off  
: Level 3  
: Level 3  
: Level 3  
Brightness  
Color Saturation  
- YCbCr-(4:2:2) : HDMI Limited range  
YCbCr-(4:2:2) output.  
If you set the HDMI output resolution to  
768p, you cannot use YCbCr format.  
- Color Saturation is only available through  
the analog outputs.  
It is not possible to adjust the Color  
Saturation in HDMI Mode.  
Limited range Black/White and color level  
are expressed within Limited data range.  
ex) When the bit depth is 8 bits  
- Y : 16~235  
Consult your TV Users Manual to find  
out if your TV supports Progressive Scan.  
If Progressive Scan is supported, follow  
the TV Users Manual regarding  
Progressive Scan settings in the TVs  
menu system.  
- CbCr : 16~240  
Full range Black/White and color level are  
expressed within full data range.  
ex) When the bit depth is 8 bits  
- Y : 0~255  
- CbCr : 0~255  
If Video Output is set incorrectly, the  
screen may be distorted.  
HDMI SETUP  
The resolutions available for HDMI output  
depend on the connected TV or projector.  
For details, see the users manual of your  
TV or projector.  
Resolution Setting  
Resolution  
: Auto  
: 480p  
Format  
: RGB-Normal  
When the resolution is changed during  
playback, it may take a few seconds for a  
normal image to appear.  
If you set the HDMI output resolution 720p  
or 1080i, HDMI output provides better  
picture quality.  
ENG-54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHANGING SETUP MENU  
Setting Up the Parental Control  
The Parental Control function works in conjunction with DVDs that have been assigned a rating,  
which helps you control the types of DVDs that your family watches. There are up to 8 rating levels  
on a disc.  
1
With the unit in Stop  
mode, press the MENU  
button.  
2
Language Setup  
Audio Setup  
Press the "/buttons to  
select Setup, then press  
Display Setup  
the  
or ENTER button.  
Parental Setup :  
EZ Setup  
Setup  
3
Language Setup  
Audio Setup  
Press the "/buttons to  
select Parental Setup,  
Display Setup  
then press the  
ENTER button.  
or  
Parental Setup :  
EZ Setup  
Setup  
PARENTAL SETUP  
: No  
4
Use Password  
Press the  
or ENTER  
button to select Yes if you  
want to use a password.  
The Enter Password  
screen appears.  
To exit the setup menu, press the MENU  
button.  
CREATE PASSWORD  
5
Enter your password. The  
Re-enter Password  
screen appears to confirm  
the password. Enter your  
password again.  
Enter Password  
- - - -  
The player is locked ( ).  
CREATE PASSWORD  
Re-enter Password  
- - - -  
ENG-55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHANGING SETUP MENU  
Setting Up the Rating Level  
1
With the unit in Stop  
mode, press the MENU  
button.  
2
Language Setup  
Press the "/buttons to  
Audio Setup  
select Setup, then press  
Display Setup  
the  
or ENTER button.  
Parental Setup :  
EZ Setup  
Setup  
3
Language Setup  
Audio Setup  
Press the "/buttons to  
select Parental Setup,  
then press the  
ENTER button.  
Display Setup  
or  
Parental Setup :  
EZ Setup  
Setup  
PASSWORD CHECK  
4
Enter your password.  
Enter Password  
- - - -  
PARENTAL SETUP  
: Yes  
5
Use Password  
Rating Level  
Press the "/buttons to  
select Rating Level, then  
: 8  
Change Password  
press the  
button.  
or ENTER  
To exit the setup menu, press the MENU  
button.  
RATING LEVEL  
6
Level 8 Adult  
Level 7  
Level 6  
Level 5  
Level 4  
Level 3  
Level 2  
Level 1 Kids Safe  
Press the "/buttons to  
select the Rating Level  
you want, then press the  
For example, if you select up to Level 6, discs  
that contain Level 7, 8 will not play.  
or ENTER button.  
e.g) Setting up in Level 6.  
ENG-56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHANGING SETUP MENU  
Changing the Password  
1
With the unit in Stop  
mode, press the MENU  
button.  
2
Language Setup  
Audio Setup  
Press the "/buttons to  
select Setup, then press  
Display Setup  
the  
or ENTER button.  
Parental Setup :  
EZ Setup  
Setup  
3
Language Setup  
Audio Setup  
Press the "/buttons to  
select Parental Setup,  
then press the  
ENTER button.  
The Enter Password  
screen appears.  
Display Setup  
or  
Parental Setup :  
EZ Setup  
Setup  
Enter your password.  
PARENTAL SETUP  
: Yes  
4
Use Password  
Rating Level  
Press the "/button to  
select Change  
: 8  
Change Password  
Password, then press the  
or ENTER button.  
Enter your new password.  
Re-enter the new  
password again.  
CHANGE PASSWORD  
Enter New Password  
- - - -  
CHANGE PASSWORD  
To exit the setup menu, press the MENU  
button.  
Re-enter Password  
- - - -  
Note  
If you have forgotten your password, see  
Forgot Passwordin the Troubleshooting Guide.  
ENG-57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6  
REFERENCE  
Troubleshooting  
Before requesting service (troubleshooting), please check the following.  
Action  
Problem  
Page  
Check the batteries in the remote control.  
No operations can be  
performed with the  
remote control.  
They may need replacing.  
Operate the remote control at a distance of no more than 20 feet.  
Remove batteries and hold down one or more buttons for several minutes to  
drain the microprocessor inside the remote control to reset it. Reinstall  
batteries and try to operate the remote control again.  
P5  
P8  
Disc does not play.  
Ensure that the disc is installed with the label side facing up.  
Check the region number of the DVD.  
5.1 channel sound is reproduced only when the following conditions are met. :  
1) The DVD player is connected with the proper Amplifier  
2) The disc is recorded with 5.1 channel sound.  
5.1 channel sound is  
not being reproduced.  
P19  
Check whether the disc being played has the 5.1 chmark on the outside.  
Check if your audio system is connected and working properly.  
In a SETUP Menu, is the Audio Output set to Bitstream?  
P50~51  
The features or action cannot be completed at this time because:  
1. The DVDs software restricts it.  
2. The DVDs software doesnt support the feature (e.g., angles).  
3. The feature is not available at the moment.  
4. Youve requested a title or chapter number or search time that is out of range.  
The  
icon appears  
on screen.  
Disc Menu doesnt appear.  
Check if the disc has a Menu.  
Play mode differs from  
the Setup Menu  
selection.  
Some of the functions selected in the Setup Menu may not work properly if the  
disc is not encoded with the corresponding function.  
P43~57  
The screen ratio  
The Screen Ratio is fixed on your DVDs.  
P52~53  
P50~51  
cannot be changed.  
Make sure you have selected the correct Digital Output in the Audio Options  
Menu.  
No audio.  
The screen is blocked  
Press the  
button for more than 5 seconds under no disc inside. All settings  
P20  
will revert to the factory settings.  
Press the  
button for more than 5 seconds under no disc inside.  
Forgot password  
P55~57  
All settings including the password will revert to the factory settings. Don't use  
this unless absolutely necessary.  
If you experience other  
problems.  
Go to the contents and find the section of the instruction book that contains  
the explanations regarding the current problem, and follow the procedure once  
again.  
If the problem still cannot be solved, please contact your nearest authorized  
service center.  
Make sure that the disc is not dirty or scratched.  
The picture is noisy or  
distorted  
P4  
Clean the disc.  
ENG-58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REFERENCE  
Action  
Problem  
Page  
P16~17  
P16~17  
No HDMI output.  
Check the Video output is HDMI enabled.  
Check the connection between the TV and the HDMI jack of DVD player.  
See if the TV supports this 480p/720p/768p/1080i DVD player.  
If snow noise appears on the screen, it means that TV does not support  
HDCP (High-bandwidth Digital Content Protection).  
Abnormal HDMI output  
screen.  
HDMI output Judder  
Check your TV system setup correctly.  
The screen Judder phenomenon may occur when frame rate is converted  
from 50Hz to 60Hz for 720P/1080i HDMI (High Definition Multimedia Interface)  
Output.  
P52~54  
Please refer to the users manual of your TV.  
ENG-59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REFERENCE  
Specifications  
Power Requirements  
Power Consumption  
Weight  
AC 120-240V ~ 60/50 Hz  
12 W  
2.3 Kg  
General  
Dimensions  
430mm (W) X 250mm (D) X 49mm (H)  
+41°F to +95°F  
Operating Temperature Range  
Operating Humidity Range  
10 % to 75 %  
Reading Speed : 3.49 ~ 4.06 m/sec.  
Approx. Play Time  
(Single Sided, Single Layer Disc) : 135 min.  
DVD  
(DIGITAL VERSATILE DISC)  
CD : 12Cm  
(COMPACT DISC)  
Reading Speed : 4.8 ~ 5.6 m/sec.  
Maximum Play Time : 74 min.  
Disc  
Reading Speed : 4.8 ~ 5.6 m/sec.  
Maximum Play Time : 20 min.  
CD : 8Cm  
(COMPACT DISC)  
Reading Speed : 4.8 ~ 5.6 m/sec.  
Maximum Play Time : 74 min. (Video + Audio)  
VCD : 12Cm  
Composite Video  
1 channel : 1.0 Vp-p (75 load)  
Y : 1.0 Vp-p (75 load)  
Pr : 0.70 Vp-p (75 load)  
Pb : 0.70 Vp-p (75 load)  
Component Video  
S-Video  
Video  
Output  
Luminance Signal : 1.0 Vp-p (75 load)  
Chrominance Signal : 0.3 Vp-p (75 load)  
480p, 720p, 768p, 1080i  
HDMI  
Digital Audio Output  
2 Channel  
Optical/Coaxial  
L(1/L), R(2/R)  
Audio  
48 kHz Sampling : 4 Hz to 22 kHz  
96 kHz Sampling : 4 Hz to 44 kHz  
*Frequency Response  
Output  
*S/N Ratio  
110 dB  
100 dB  
0.004 %  
*Dynamic Range  
*Total Harmonic Distortion  
*: Nominal specification  
- Samsung Electronics Co., Ltd reserves the right to change the specifications with  
out notice.  
- Weight and dimensions are approximate.  
ENG-60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warranty  
LIMITED WARRANTY TO ORIGINAL PURCHASER  
THIS SAMSUNG BRAND PRODUCT, AS SUPPLIED AND DISTRIBUTED BY SAMSUNG ELECTRONICS  
AMERICA, INC. (SAMSUNG) AND DELIVERED NEW, IN THE ORIGINAL CARTON TO THE ORIGINAL  
CONSUMER PURCHASER, IS WARRANTED BY SAMSUNG AGAINST MANUFACTURING DEFECTS IN  
MATERIALS AND WORKMANSHIP FOR THE FOLLOWING LIMITED WARRANTY PERIOD:  
One (1) Year Parts / Ninety (90) days Labor  
This limited warranty begins on the original date of purchase, and is valid only on products purchased and  
used in the United States, and does not include transportation, installation, removal or reinstallation.  
WARRANTY REPAIRS MUST BE PERFORMED BY SAMSUNGS AUTHORIZED SERVICE CENTER. TO  
RECEIVE WARRANTY SERVICE, THE ORIGINAL DATED BILL OF SALE MUST BE PRESENTED UPON  
REQUEST AS PROOF OF PURCHASE TO SAMSUNG OR SAMSUNGS AUTHORIZED SERVICE CENTER.  
TRANSPORTATION TO AND FROM THE SERVICE CENTER IS THE RESPONSIBILITY OF THE  
PURCHASER.  
SAMSUNG WILL REPAIR OR REPLACE THIS PRODUCT, AT OUR OPTION AND AT NO CHARGE WITH  
NEW OR RECONDITIONED PARTS, IF FOUND TO BE DEFECTIVE DURING THE LIMITED WARRANTY  
PERIOD SPECIFIED ABOVE. The product must be returned during the warranty period with transportation  
charges  
prepaid to SAMSUNGs designated service center. Prior to returning any product for warranty service, the  
purchaser must contact SAMSUNG for problem determination and service procedures. SAMSUNG DOES  
NOT WARRANT UNINTERRUPTED OR ERROR-FREE OPERATION OF THE PRODUCT.  
All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG.  
Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is  
longer.  
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal,  
noncommercial use of this product and shall not apply to the following, including, but not limited to: damage  
which occurs in shipment; applications and uses for which this product was not intended; failures or problems  
which are caused by products or equipment not supplied by SAMSUNG; accidents, misuse, abuse, neglect,  
misapplication, fire, water, lightning or other acts of nature; incorrect electrical line voltage, fluctuations or  
surges; damage caused by improper or faulty installation; improper connection with any peripheral; product  
alteration or modification; improper or unauthorized repair; cosmetic damage or exterior finish; product with  
altered serial numbers; failure to follow operating instructions, customer adjustments, maintenance and  
environmental instructions that are covered and prescribed in the instruction book; use of non-SAMSUNG or  
unauthorized parts, supplies, accessories or equipment which damage this product or result in service  
problems; failures or problems due to incompatibility with other equipment.  
ENG-61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ELECTRONICS  
HEADQUARTERS  
105 Challenger Road  
Ridgefield Park, NJ 07660-0511  
TEL: 1-800-SAMSUNG  
SERVICE DIVISION  
400 Valley Road, Suite 201  
Mount Arlington, NJ 07856  
1-800-SAMSUNG (1-800-726-7864)  
AK68-00637S  
US  
Download from Www.Somanuals.com. All Manuals Search And Download.  

RCA Flat Panel Television RLDED3950A User Guide
ResMed Ventilation Hood Elise 150 User Guide
Rio Audio MP3 Player Karma MP3 User Guide
Rosewill Home Security System RXS 3323 User Guide
Salton Kitchen Grill GR26SP User Guide
Samsung Bluetooth Headset AWEP570PBECSTA User Guide
Samsung Camcorder D965 User Guide
Samsung Computer Monitor 150N User Guide
Samsung Digital Camera U CA 4 User Guide
Samsung Stereo System AH68 01236A User Guide