DVD PLAYER
DVD-E232
DVD-E234
DVD-E235D
DVD-E335
DVD-E435
AK68-00141A
UK
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
Precautions
1. Setting up
1
Ensure that the mains supply in your house complies with that indicated on the identification sticker
located at the back of your play. Install your player horizontally, on a suitable base (furniture),
with enough space around it for ventilation (7~10cm). Make sure the ventilation slots are not
covered. Do not stack other, or heavy devices on top of the player. Do not place the player on
amplifiers or other equipment which may become hot. Before moving the player ensure the disc
tray is empty. This player is designed for continuous use.
Switching off the DVD player to the stand-by mode does not disconnect the electricity supply In
order to separate the player completely from the mains,it has to be disconnected by unplugging the
main plug, especially when left unused for a long period of time.
2. For your safety
Never open the player or any of its components. It can be dangerous for you or certain fragile
components. You could receive an electric shock or touch the laser beam. Do not place your eyes
close to the opening of the disc tray or any other opening to look inside the player.
3. Caution
Protect the player from moisture (dripping or splashing and objects filled with liquids), and excess
heat (e.g.fireplace) or equipment creating strong magnetic or electric fields (i.e.speakers...).
Disconnect the power cable from the mains electricity supply if the player malfunctions.
Your player is not intended for industrial use but for domestic purposes only. Use of this product is
for personal use only. If your player or disc has been stored in a cold atmosphere for example
during transportation in the winter, wait for approximately 2 hours until they have reached room
temperature, before use.
2
3
4. Disc
Be careful handle your discs with care. Hold a disc with finger on the border or hole. Always place
disc with the label facing upward (in case of a single side disc). Always use a soft cloth to clean
disc if necessary, wipe from the centre to the border. Always put disc back into their cases after
playing and store in vertical position. Always place the disc properly into the tray using the proper
guide area. Never use record cleaning sprays, benzine, static electricity liquids or any other solvent,
if the disc surface is dirty. Wipe gently with a soft damp (water only) cloth, never wipe the disc in a
circular motion, since circular scratches are likely to occur and could cause noise during playback.
5. Environmental info
4
5
Batteries: The battery used in this product contains chemicals that are harmful to the environment.
Do not dispose of batteries in the general domestic waste. It is recommended that the replacement of
the battery should be done by a technician.
Disposal of old equipment and packaging: Old equipment and packaging should not be disposed of as
domestic waste, but in accordance with the appliable regulations.
6. Maintenance of Cabinet
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.
• Do not use benzene, thinner, or other solvents for cleaning.
• Wipe the cabinet with a soft cloth.
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Start
Table of contents
Setup
General Features ........................................................................................................6
......................................................................................
Accessories
Disc Type and Characteristics
7
................................................................................................
Description-Front Panel
8
Display Indicators ....................................................................................................10
..............................................................................................
Description-Rear Panel
11
14
........................................................................................
Tour of the Remote Control
Connections
Choosing a Connection
..............................................................................................
18
Batteries for
Remote Control (AA Size)
Remote Control
Basic Functions
Playing a Disc
Using the Search & Skip Functions
Using the Display Function
............................................................................................................
20
22
23
..........................................................................
........................................................................................
Using the Disc and Title Menu ..................................................................................24
Using the Function Menu ..........................................................................................25
................................................................................................................
Repeat Play
26
Advanced Functions
Adjusting the Aspect Ratio (EZ View)
User’s Manual
Video/Audio Cable
........................................................................
27
29
30
31
32
33
34
35
36
38
39
........................................................................................................
Slow Repeat play
....................................................................................
................................................................................
......................................................................................
....................................................................
....................................................................................
Selecting the Audio Language
Selecting the Subtitle Language
Changing the Camera Angle
Using the Instant Replay/Skip Function
Using the Bookmark Function
If remote doesn’t operate
properly:
Install Batteries in the
Remote
..........................................................................
Using the Zoom & 3D Sound Functions
Open the battery cover on the back of
• Check the polarity + - of the
batteries (Dry-Cell)
..........................................................................................................
MP3/WMA Play
1 the remote.
....................................................................................
Program Play & Random Play
..................................................................................................
Picture CD Playback
Insert two AA batteries. Make sure that
2 the polarities (+ and -) are aligned
• Check if the batteries are drained.
Changing Setup menu
correctly.
................................................................................................
Using the Setup Menu
41
42
44
45
46
48
49
• Check if remote sensor is blocked
by obstacles.
............................................................................
....................................................................................
................................................................................
..................................................................................
..................................................................................
................................................................................
Setting Up the Language Features
Replace the battery cover.
3
Setting Up the Audio Options
Surround Sound Speaker Setup
Setting Up the Display Options
Setting Up the Parental Control
Controlling a TV with the remote
• Check if there is any fluorescent
lighting nearby.
Reference
Troubleshooting ..........................................................................................................50
Specifications..............................................................................................................51
Warranty......................................................................................................................52
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
General Features
Disc Type and Characteristics
Excellent Sound
Digital Photo Viewer (JPEG)
You can view the Digital Photos on your TV.
This DVD player is capable of playing the following types of discs with the
corresponding logos:
Dolby Digital, a technology developed by
Dolby Laboratories provides crystal clear
sound reproduction.
Repeat
Disc Types
(Logos)
Recording
Types
Max.
Playing Time
You can repeat a song or movie simply by
pressing the REPEAT button.
Disc Size
Characteristics
Screen
Single-sided
240 min.
Double-sided
480 min.
• DVD contains excellent
sound and video due to
Dolby Digital and MPEG-2
system.
• Various screen and audio
functions can be easily
selected through the on-
screen menu.
Video with MPEG-2 compression technology.
Both regular and widescreen(16:9) pictures
can be viewed.
DVD
MP3/WMA
This unit can play discs created from
MP3/WMA files.
12 Cm
Audio
+
Video
Single-sided
80 min.
Double-sided
160 min.
Slow Motion
An important scene can be viewed in slow
motion.
Instant Replay
8 Cm
12 Cm
8 Cm
This function is used to replay the previous
10 seconds of the movie from the current
position.
Programmed Play
You can program tracks to play in desired
order. (CD, WMA, MP3)
VIDEO-CD
AUDIO-CD
74 min.
20 min.
74 min.
20 min.
Instant Skip
This function skips playback ahead 10 seconds.
• Video with CD sound, VHS
quality & MPEG-1
compression technology.
Audio
+
Video
Parental Control
The parental control allows users to set the
level necessary to prohibit children from
viewing harmful movies such as those with
violence, adult subject matter, etc.
NOTE
• CD is recorded as a
Digital Signal with better
audio quality, less
distortion and less
deterioration of audio
quality over time.
* Discs which cannot be played with this player.
12 Cm
8 Cm
Various On-Screen Menu Functions
You can select various languages
(Audio/Subtitle) and screen angles while
enjoying movies.
• DVD-ROM
• CD-ROM
• CDI
• HD layer of super Audio CD
• CDGs play audio only, not graphics.
• DVD-RAM
• CDV
Audio
Easy View
*
Ability to play back may depend on recording conditions.
Easy View can convert Letter Box images to
full screen viewing on your conventional TV.
• DVD-R, +R
• DVD+RW, -RW
• CD-RW
Disc Markings
DIGITAL
SOUND
~
STEREO
PAL
COPY PROTECTION
• Digital
Audio disc
• DTS disc
• Play
• PAL broadcast • Dolby
• Stereo disc
• MP3 disc
system in U.K,
Region
Number
Digital disc
• Many DVD discs are encoded with copy protection. Because of this, you should only connect your
DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from
copy-protected DVD discs.
France,
Germany, etc.
• This product incorporates copyright protection technology that is protected by methods claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
Play Region Number
Both the DVD player and the discs are coded by region. These regional codes must match in order for the
disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is described on the rear panel of the player.
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Description-Front Panel
Description-Front Panel
DVD-E232
Front Panel Controls
1. STANDBY/ON
• When the unit is first plugged in, the indicator lights. When STANDBY/ON is pressed on again,
the light goes out and the player is turned on.
2. HEADPHONE JACK
•
You can attach headphones here for private listening.
5
6 7 8 9
10
4
1
3. HEADPHONE VOLUME
Use to adjust headphones volume level.
DVD-E234
•
4. DISC TRAY
• Load the disc here.
5. DISPLAY
• Operation indicators are displayed here.
6. OPEN/CLOSE
• Press to open and close the disc tray.
5
6 7 8 9
10
4
1
7. PLAY/PAUSE (
)
• Begin or pause disc play.
DVD-E235D
8. STOP (
)
• Stops disc play.
9. SKIP (
/
)
• Use to skip a scene or music.
10. EZ VIEW
• Easy View can convert Letter Box images to full screen viewing on your conventional TV.
6
8 9
10
7
5
4
1
11. SHUTTLE
• Use during DVD and CD play to fast forward or reverse.
DVD-E335/DVD-E435
1
3
5
6 7 8 9 10 11
2
4
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Indicators
Description-Rear Panel
DVD-E435
1
S-VIDEO
VIDEO OUT
SELECT
SCART
3
2
1
2
3
4 5
6
7
8
Front Panel Display
Rear Panel
1. Disc type indicators
2. Play / Pause / Forward play
1. DIGITAL AUDIO OUT JACKS
• Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital, receiver.
Use to connect to an A/V Amplifier that contains a Dolby Digital, MPEG-2 or DTS decoder.
3. Displays various messages concerning operations such as PLAY, STOP, LOAD ...
no DISC : No disc loaded.
2. 5.1CH ANALOG AUDIO OUT JACKS
• Connect to an amplifier with 5.1ch analog input jacks.
OPEN : The disc tray is open.
LOAD : Player is loading disc information.
3. MIXED AUDIO OUT JACKS
• Connect to the Audio input jacks of your television, audio/video receiver.
4. VIDEO OUT JACKS
• Use a video cable to connect to the Video input jack on your television.
5. S-VIDEO OUT JACK
• Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher quality
picture. The S-Video must be selected in the VIDEO OUT SELECT.
6. VIDEO OUT SELECT SWITCH
• Use this switch to set video out. If Scart jack is selected, S-Video may not work.
If S-Video is selected, Scart jack may not work.
7. SCART AV1 JACK
• Connect to a TV with scart input jack.
8. SCART AV2 JACK
• Connect to a video recorder or other equipment.
NOTE
* Select the VIDEO OUT SELECT switch in the Stop or Power Off mode.
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Description-Rear Panel
Description-Rear Panel
Rear Panel
DVD-E232/DVD-E234/DVD-E235D
1. DIGITAL AUDIO OUT JACKS
• Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital, receiver.
Use to connect to an A/V Amplifier that contains a Dolby Digital, MPEG-2 or DTS decoder.
R
L
2. ANALOG AUDIO OUT JACKS
• Connect to the Audio input jacks of your television, audio/video receiver.
3. VIDEO OUT JACKS
• Use a video cable to connect to the Video input jack on your television.
4. S-VIDEO OUT JACK
1
2
3 4
5
6
• Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher quality
picture. The S-Video must be selected in the VIDEO OUT SELECT.
5. VIDEO OUT SELECT SWITCH
• Use the switch to set video out. If Scart jack is selected, S-Video may not work.
If S-Video is selected, Scart jack may not work.
DVD-E335
6. SCART AV1 JACK
• Connect to a TV with scart input jack.
7. SCART AV2 JACK
• Connect to a video recorder or other equipment.
S-VIDEO
VIDEO OUT
SELECT
SCART
1
2
3 4
5
6
7
NOTE
* Select the VIDEO OUT SELECT switch in the Stop or Power Off mode.
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Tour of the Remote Control
Tour of the Remote Control
DVD-E232/DVD-E234/DVD-E235D/DVD-E335
DVD Function Buttons
1. DVD POWER Button
• Turns the power on or off.
16. PLAY/PAUSE Button (
)
1
2
13
• Begin/Pause disc play.
2. NUMBER Buttons
17. SKIP Buttons (
/
)
• Use to skip the title, chapter, or track.
3. STEP Button
18. RETURN Button
• Advances play one frame at a time.
• Returns to a previous menu.
4. I.REPLAY Button
19. INFO Button
• This function is used to replay the previous 10
seconds of the movie from the current position.
• Displays the current disc mode.
14
15
5. EZ VIEW Button
• Easy View can convert Letter Box images to full
20. ENTER/DIRECTION Button
3
4
(UP/DOWN or LEFT/RIGHT Buttons)
• This button functions as a toggle switch.
screen viewing on your conventional TV.
5
6
7
6. SEARCH Buttons (
• Allows you to search forward/backward through a
/
)
21. ANGLE Button
• Use to access various camera angles on a DVD.
disc.
22. MODE Button
16
17
18
7. STOP Button (
)
• Allows you to program a specific order.
8. DISC MENU Button
• Brings up the Disc menu.
23. SUBTITLE Button
8
9
24. AUDIO Button
9. TITLE MENU Button
• Brings up the Title menu.
19
20
• Use this button to access various audio functions
on a disc.
10. CLEAR Button
25. REPEAT A-B Button
• Use to remove menus or status displays from the
• Use to mark a segment to repeat between A and
screen.
B.
11. BOOKMARK Button
26. REPEAT Button
• Allows you to repeat play a title, chapter, track, or
disc.
12. MENU Button
21
• Brings up the DVD player’s setup menu.
27. ZOOM Button
22
23
24
10
13. OPEN/CLOSE Button
• Enlarges the DVD picture.
• To open and close the disc tray.
14. 3D Button
11
12
15. I.SKIP Button
25
26
27
• This function skips playback ahead 10 seconds.
14
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Tour of the Remote Control
Tour of the Remote Control
DVD-E435
DVD Function Buttons
1. DVD POWER Button
• Turns the power on or off.
18. TV POWER Button
19. SLOW Button
18
19
1
2. ZOOM Button
• Enlarges the DVD picture.
2
3
20. 3D Button
21. OPEN/CLOSE Button
22. CHANNEL Buttons
3. NUMBER Buttons
4. MENU Button
• Brings up the DVD player’s setup menu.
23. I.SKIP Button
• This function skips playback ahead 10 seconds.
5. VOLUME Buttons
6. TV/VIDEO Button
7. I.REPLAY Button
24. PLAY/PAUSE Button (
)
20
4
5
6
7
8
9
• Begin/Pause disc play.
25. SKIP Buttons (
/
)
21
22
23
24
•
This function is used to replay the previous 10 seconds of
the movie from the current position.
• Use to skip the title, chapter, or track.
26. RETURN Button
8. EZ VIEW Button
• Easy View can convert Letter Box images to full
screen viewing on your conventional TV.
• Returns to a previous menu.
27. INFO Button
25
26
• Displays the current disc mode.
9. STOP Button (
)
10
11
12
28. ANGLE Button
10. DISC MENU Button
• Use to access various camera angles on a DVD.
• Brings up the Disc menu.
27
29. MODE Button
11. TITLE MENU Button
• Allows you to program a specific order.
• Brings up the Title menu.
30. SUBTITLE Button
31. AUDIO Button
12. ENTER/DIRECTION Button
28
(UP/DOWN or LEFT/RIGHT buttons)
• This button functions as a toggle switch.
29
30
31
•
Use this button to access various audio functions on a disc.
13
13. CLEAR Button
32. REPEAT A-B Button
14
15
•
Use to remove menus or status displays from the screen.
•
Use to mark a segment to repeat between A and B.
32
14. BOOKMARK Button
15. REPEAT Button
•
Allows you to repeat play a title, chapter, track, or disc.
16. JOG DIAL
• Operates frame by frame play. In CD mode,
performs track search.
16
17
17. SHUTTLE DIAL
• Performs fast motion play.
16
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Choosing a Connection
Choosing a Connection
The following show examples of connections commonly used to connect the DVD player
with a TV and other components.
Connection to a TV (For Video)
TV (Normal, Widescreen, Projection, etc..)
Before Connecting the DVD Player
• Always turn off the DVD player, TV, and other components before you
connect or disconnect any cables.
Method 3
Method 1
Method 2
• Refer to the owner’s manual of the additional components you are connecting for
more information on those particular components.
Good
picture
Better
picture
Best
picture
Basic Audio
Connection to an Audio System
TV
Method 1
Method 2
Method 3
Scart Cables
(not included)
S-Video
Cable
AV Cable
AUDIO
SYSTEM
2ch Amplifier
Audio Input Jacks
5.1ch Analog Amplifier
Audio Input Jacks
Dolby Digital Decoder
Digital Audio Input Jacks
OR
OR
DVD
PLAYER
OR
e.g) DVD-E435
Audio Output Jacks
Video Output Jack
Scart Jack
S-Video Jack
DVD
PLAYER
DVD Player + TV with Video Input Jack
DVD Player + TV with S-Video Input Jack
Method 1
Method 2
e.g) DVD-E435
(If S-Video is selected in the VIDEO OUT SELECT.)
Mixed Audio Out
Analog Audio Out
Digital Audio Out
DVD Player + TV with Scart Input Jack (Audio & Video)
(If Scart jack is selected in the VIDEO OUT SELECT.)
Method 3
An Example of Connecting DVD with Other Equipment
Method 1
Method 2
Method 3
DVD Player + 2ch Stereo
Amplifier or Dolby Pro Logic Decoder
DVD Player + Amplifier with 5.1ch
Analog Input Jacks
DVD Player + Amplifier with Dolby
Digital Decoder/DTS Decoder/MPEG-2
NOTE
• If Scart Jack is selected, S-Video will not work.
• If S-Video is selected, Scart Jack will not work.
(DVD-E335/DVD-E435)
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Disc
Playing a Disc
Step Motion Play (Except CD)
Before Play
7 DVD-E435 : If turning Jog Dial, you can view one by one.
DVD-E232/DVD-E234/DVD-E235D/DVD-E335 : Press the STEP button on the remote during play.
- Each time the button is pressed, a new frame will appear.
- No sound is heard during STEP mode.
• Turn on your TV and press the TV/VIDEO button to select the video
mode.
• Turn on your Audio System and select AUX, CD or DVD.
SELECT MENU LANGUAGE
- Press PLAY/PAUSE (
) to resume normal play.
(You can only perform step motion play in the forward direction.)
After plugging in the player, the first time you press the DVD
POWER button, this screen comes up :
If you want to select the language, press a NUMBER button.
(This screen will only appear the very first time you plug in the player.)
Slow Motion Play (Except CD)
8 DVD-E232/DVD-E234/DVD-E235D/DVD-E335 : Press the
button on the remote during PAUSE
or STEP mode. By pressing the
normal speed.
button, you can select slow motion play for 1/8, 1/4 or 1/2 of
DVD-E435 : Press and hold the
button to choose the play speed between 1/8X, 1/4X and 1/2X
of normal during PAUSE or STEP mode, or press the SLOW button you can play slow motion for
1/8 of normal speed.
- No sound is heard during slow mode.
- Press PLAY/PAUSE (
- When playing a DVD/VCD, reverse slow motion play will not work.
) to resume normal play.
Play
Press the OPEN/CLOSE button.
1 The STANDBY indicator light goes out and the tray opens.
Place a disc gently into the tray with the disc’s label
2 facing up.
RESUME function
When you stop disc play, the player remembers where you stopped, so when you press PLAY (
it will pick up where you left off. (unless the disc is removed, the STOP (
player is unplugged.)
) again,
) button is pressed twice or the
Press the PLAY/PAUSE (
) button or OPEN/CLOSE
3 button to close the disc tray.
Stopping Play
NOTE
4 Press the STOP (
) button during play.
• If the player is left for 5 minutes in pause mode, it will stop.
• If the player is left in the stop mode for more than 30 minutes, the power will automatically shut off.
(Automatic Power-Off Function)
• If the player is left in the stop mode for more than one minute without any user interaction, a screen
saver will be activated, and the TV screen will fade in and out repeatedly. Press the PLAY (
button to resume normal play.
Removing Disc
5 Press the OPEN/CLOSE button.
)
Pausing Play
6 Press the PLAY/PAUSE (
) or STEP button on the remote during play.
) button once again.
• This
icon indicates an invalid button press.
- Screen stops, no sound.
- To resume again, press PLAY/PAUSE (
20
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Search & Skip Functions
Using the Display Function
During play, you can search quickly through a chapter or track or use the skip
function to jump to the next selection.
When Playing a DVD/VCD/CD
During play, press the INFO button on the remote.
Use the UP/DOWN buttons to select the desired
DVD
1
2 item.
DVD
Searching through a Chapter or Track
01
Title
02
Chapter
Time
0:00:13
ENG 5.1CH
DVD-E232/DVD-E234/DVD-E235D/DVD-E335 : Press the
remote and press again to search at a faster speed on the DVD, VCD, CD.
or
button on the
Audio
1
1
Use the LEFT/RIGHT buttons to make the desired
Off
Subtitle
3D Sound
3 setup, then press ENTER.
DVD-E435 : Turn the shuttle dial of remote control during disc play.
Off
DVD-E335/DVD-E435 : Turn the shuttle dial on the front can a multiple-speed
operation if desiring to use the key on the front.
• You may use the number buttons of the remote control to
directly access a title, chapter or to start the playback from
the desired time.
ENTER
DVD 2X, 4X, 8X, 16X, 32X, 128X
VCD 4X, 8X
VCD
To make the screen disappear, press the INFO
VCD
Track
4 button again.
CD 2X, 4X, 8X
01
0:00:48
Off
Time
To access the desired title when there is more than
3D Sound
ENTER
one in the disc. For example, if there is more than one
movie on a DVD, each movie will be identified.
Title
Skipping Tracks
Most of DVD discs are recorded in chapters so that
you can quickly find a specific passage.
Chapter
Time
CD
During play, press the
or
button.
Allows playback of the film from a desired time.
You must enter the starting time as a reference.
CD
• When playing a DVD, if you press the
If you press the
button, it moves to the next chapter.
01
Track
button, it moves to the beginning of the chapter.
Refers to the language of the film soundtrack. In the
example, the soundtrack is played in English 5.1CH.
A DVD disc can have up to eight different
soundtracks.
0:00:48
Off
Time
One more press makes it move to the beginning of the previous chapter.
Audio
3D Sound
ENTER
• When playing a VCD 2.0 in MENU OFF mode, a VCD 1.1 or a CD, if you
press the
button, it moves to the next track. If you press the
button,
it moves to the beginning of the track.
One more press makes it move to the beginning of the previous track.
Refers to the subtitle languages available in the disc.
You will be able to choose the subtitles language or, if
you prefer, turn them off from the screen. A DVD disc
can have up to 32 different subtitles.
Subtitle
3D Sound
• If a track exceeds 15 minutes when playing a VCD and you press the
button, it moves forward 5 minutes. If you press the
backward 5 minutes.
button, it moves
NOTE
A surround sound effect is generated using only two
front speakers.
What is a Chapter?
Each Title on a DVD is usually divided
into chapters (similar to tracks on an
audio CD).
What is a Title?
NOTE
A DVD may contain several different
titles. For example, if a disc contains
four different movies, each might be
considered a title.
*
When in VCD 2.0 mode (MENU ON mode), this function does
not work.
22
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Disc and Title Menu
Using the Function Menu
Using the Disc Menu
Using the Function Menu
During the playback of a DVD disc, press the
Press the MENU button during playback.
DVD
1
DVD
1 MENU button on the remote.
Info
Disc Menu
Title Menu
Function
Setup
Disc Menu
Press ENTER key
for Disc Menu
Use the UP/DOWN buttons to highlight Function,
2 then press the RIGHT or ENTER button.
Zoom
Bookmark
Repeat
EZ View
Title Menu
Select Disc Menu using the UP/DOWN buttons,
2 then press the RIGHT or ENTER button.
Function
Setup
Function selection screen appears, Info, Zoom,
ENTER
RETURN
MENU
3 Bookmark, Repeat and EZ View.
ENTER
RETURN
MENU
- Info (See Page 23)
- Zoom (See Page 35)
- Bookmark (See Page 34)
- Repeat (See Page 26)
- EZ View (See Page 27~28)
Use the UP/DOWN button to highlight one of the 5
Using the Title Menu
4 functions. Then press the RIGHT or ENTER button
to access the function.
DVD
During the playback of a DVD disc, Press the
1 MENU button on the remote.
Disc Menu
Title Menu
Press ENTER key
for Title Menu
Select Title Menu using the UP/DOWN buttons,
2 then press the RIGHT or ENTER button.
Function
Setup
ENTER
RETURN
MENU
NOTE
NOTE
• Depending on the disc, the Title and Disc Menus may not work.
• You can also directly select these functions using thier respective buttons on the remote.
• Title Menu will only be displayed if there are at least two titles in the disc.
• You can also use the Title Menu and the Disc Menu, using the TITLE MENU and the DISC MENU buttons
on the remote.
• In VCD2.0, the DISC MENU button works as a conversion switch between Menu On and Menu Off mode.
24
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeat Play
Adjusting the Aspect Ratio (EZ View)
Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc.
To play back using aspect ratio (DVD)
Press the EZ VIEW button.
1 • The screen size changes when the button is pressed repeatedly.
• The screen zoom mode operates differently depending on the screen
setting in the initial setup menu.
When playing a DVD
DVD
• To ensure correct operation of the EZ VIEW button, you should set the
correct aspect ratio in the initial setup (See page 47).
Press the REPEAT button on the remote.
1 Repeat screen appears.
ENTER
Chapter Title A - B
Off
Select Chapter, Title or A-B using the
If you are using a 16:9 TV
2 LEFT/RIGHT buttons.
For 16:9 aspect ratio discs
REPEAT A-B
*
• Wide Screen
Displays the content of the DVD title in 16:9 aspect ratio.
• Press the REPEAT button. Select A-B on screen with the
LEFT/RIGHT buttons or press the 'REPEAT A-B' button on
the remote.
• Screen Fit
VCD/CD
The top and bottom of the screen are cut off. When playing a
2.35:1 aspect ratio disc, the black bars at the top and bottom of the
screen will disappear. The picture will look vertically stretched.
(Depending on the type of disc, the black bars may not disappear
completely.)
• Press ENTER at the point where you want the repeat play to
start (A). The B is automatically highlighted.
• Press ENTER at the point where you want the repeat play to
stop (B).
• To terminate the function, press the 'CLEAR' button or the
'REPEAT A-B' button again.
ENTER
Track Disc A - B
Off
• Zoom Fit
• A-B REPEAT does not allow you to set point (B) until at least
5 seconds has elapsed after point (A) has been set.
The top, bottom, left and right of the screen are cut off and the central
portion of the screen is enlarged.
For 4:3 aspect ratio discs
Press ENTER.
3
• Normal Wide
Displays the content of the DVD title in 16:9 aspect ratio. The picture
will look horizontally stretched.
To return to normal play, press REPEAT again,
4 then press the LEFT/RIGHT buttons to select Off.
• Screen Fit
Press ENTER, then press the PLAY/PAUSE
button.
The top and bottom of the screen are cut off and the full screen
appears. The picture will look vertically stretched.
• Zoom Fit
The top, bottom, left and right of the screen are cut off and the central
portion of the screen is enlarged.
• Vertical Fit
When a 4:3 DVD is viewed on a 16:9 TV, black bars will appear at
the left and right of the screen in order to prevent the picture from
looking horizontally stretched.
NOTE
• DVD repeats play by chapter or title, CD and VCD repeat play by disc or track.
• Depending on the disc, the Repeat function may not work.
• When in VCD 2.0 mode (MENU ON mode), this function does not work.
26
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Aspect Ratio (EZ View)
Slow Repeat play
This feature allows you slowly repeat scenes containing sports, dancing,
musical instruments being played etc. so you can study them more closely.
If you are using a 4:3 TV
For 16:9 aspect ratio discs
• 4:3 Letter Box
Displays the content of the DVD title in 16:9 aspect ratio.
The black bars will appear at the top and bottom of the screen.
When playing a DVD
• 4:3 Pan Scan
The left and right of the screen are cut off and displays the central
portion of the 16:9 screen.
During play, press the PLAY/PAUSE (
) button.
1
• Screen Fit
The top and bottom of the screen are cut off and the full screen
appears. The picture will look vertically stretched.
Press and hold the
button to choose the play speed between 1/8X, 1/4X and
2 1/2X of normal. (DVD-E435 only)
• Zoom Fit
The top, bottom, left and right of the screen are cut off and the central
portion of the screen is enlarged.
Press the
button to choose the play speed between 1/8X, 1/4X and 1/2X of
normal. (DVD-E232/DVD-E234/DVD-E235D/DVD-E335 only)
For 4:3 aspect ratio discs
Press the REPEAT A-B button to select the point where the function starts. (A)
Press the REPEAT A-B button to select the point where the function ends. (B)
• Normal Screen
Displays the content of the DVD title in 4:3 aspect ratio.
3
4
• Screen Fit
The top and bottom of the screen are cut off and the full screen
appears. The picture would look vertically stretched.
• Zoom Fit
The top, bottom, left and right of the screen are cut off and the central
portion of the screen is enlarged.
NOTE
• This function may behave differently depending on the type of disc.
NOTE
• The disc will play from A to B repeatedly at the speed you chose.
• To terminate the function, press the 'CLEAR' button or the 'REPEAT A-B' button again.
• A-B REPEAT does not allow you to set point (B) until at least 5 seconds has elapsed after point (A) has been set.
28
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Audio Language
Selecting the Subtitle Language
You can select a desired subtitle quickly and easily with the SUBTITLE button.
Using the SUBTITLE button
You can select a desired language quickly and easily with the AUDIO button.
Using the AUDIO button
Press the SUBTITLE button.
1
ENG
On
Use the LEFT/RIGHT buttons to select the
2 desired subtitle language.
Press the AUDIO button.
1
DVD
Use the LEFT/RIGHT buttons to select the
2 desired language on a DVD.
Use the UP/DOWN buttons to determine
3 whether or not the subtitle will be displayed.
- The audio languages are represented by abbreviations.
ENG
Off
- Initially, the subtitling will not appear on screen.
Use the LEFT/RIGHT buttons to select Stereo,
- The subtitle languages are represented by abbreviations.
3 LEFT or RIGHT. (On VCD/CD)
VCD/CD
NOTE
NOTE
• This function depends on what languages are encoded on the disc and may not work with all DVDs.
• This function depends on what languages are encoded on the disc and may not work with all DVDs.
• A DVD disc can contain up to 8 audio languages.
• A DVD disc can contain up to 32 subtitle languages.
•
How to have the same audio language come up whenever you play a DVD;
Refer to “Setting Up the Language Features” on page 43.
•
How to have the same subtitle language come up whenever you play a DVD;
Refer to “Setting Up the Language Features” on page 43.
30
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Camera Angle
Using the Instant Replay/Skip Function
When a DVD contains multiple angles of a particular scene, you can select the Angle
function.
Using the Instant Replay function (DVD)
If you miss a scene, you can see it again using
this function.
Using the ANGLE button
If you press the I.REPLAY button, the current
Press the ANGLE button to see if an ANGLE
1 scene moves backward about 10 seconds,
(
) mark is present at the upper left hand
and plays back.
corner of the screen.
- Depending on the disc, the Instant Replay
function may not work.
When an ANGLE mark is shown, press the
1 ANGLE button, then an ANGLE select icon
will appear at the upper left hand corner of
the screen.
Use the LEFT/RIGHT buttons to select the
2 desired screen angle.
Using the Instant Skip function (DVD)
To turn off the display, press the ANGLE
3 button again.
Use this function to skip playback 10 seconds
ahead of the current scene.
Press the I.SKIP button.
1
- Playback will skip ahead 10 seconds.
- Depending on the disc, this function may not work.
32
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Bookmark Function
Using the Zoom & 3D Sound Functions
This feature lets you bookmark sections of a DVD or VCD (MENU OFF mode) so you can
quickly find them at a later time.
Using the Zoom Function (DVD)
During play or pause mode, press the ZOOM button
1 on the remote.
Using the Bookmark Function (DVD/VCD)
A zoom mark will be displayed on screen.
During play, press the BOOKMARK button on the
1 remote. The Bookmark icons will be displayed.
ENTER
Use the UP/DOWN or LEFT/RIGHT buttons to select
2 the part of the screen you want to zoom in on.
Use the LEFT/RIGHT buttons to move to the
2 desired bookmark icon.
Press the ENTER button.
3
When you reach the scene you want to mark,
- During DVD play, press ENTER to zoom in 2X/4X/2X/Normal in
order.
3 press the ENTER button. The icon will change to
- During VCD play, press ENTER to zoom in 2X/Normal in order.
a number (1, 2, or 3).
Press the BOOKMARK button to turn off the
4 display.
Using the 3D Sound Function
Recalling a Marked Scene
The simulated surround effect depends on the disc
contents. If you connect the unit to your stereo
system, you can enhance sound quality and
produce a greater surround effect.
This feature is useful when you are using the DVD
player with a two channel stereo through the
analog outputs.
During play, press the BOOKMARK button
Off
1 on the remote.
CLEAR
1
–
–
Use the LEFT/RIGHT buttons to select a
2 marked scene.
(Discs which are recorded with LPCM or DTS will
not work.)
Press the PLAY/PAUSE (
) buttons to skip
3 to the marked scene.
During play, press the 3D button.
NOTE
1 The 3D SOUND mark will be displayed on
NOTE
Clearing a Bookmark
screen.
• 3D Sound is possible only on discs
recorded using DOLBY SURROUND
or DOLBY DIGITAL. However, some
of these discs do not contain rear
channel sound signals.
• Up to three scenes may be marked
at a time.
During play, press the BOOKMARK button
Press the UP/DOWN buttons to turn the
2 3D Sound feature on or off.
1 on the remote.
• When in VCD 2.0 mode (MENU ON
mode), this function does not work.
Use the LEFT/RIGHT buttons to select the
• Depending on the disc, the Zoom and
3D Sound function may not work.
• Depending on the disc, the
Bookmark function may not work.
2 bookmark number you want to delete.
Press the CLEAR button to delete a
3 bookmark number. Press the BOOKMARK
button to turn off the display.
34
35
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3/WMA Play
MP3/WMA Play
When an MP3/WMA Disc is inserted into the DVD player, the first song file of the first folder
plays.
CD-R MP3/WMA discs
•
If more than two file extensions are present, select the media
of your choice by pressing UP/DOWN, then press the ENTER
button.
When playing CD-R/MP3 or WMA discs, please follow all the recommendations for CD-R
above, plus the comments below:
•
•
To change the currently playing media, press the STOP (
button twice and then press the MENU button.
If no button on the remote controller is pressed for 60 seconds,
the menu will disappear and the selected item will be played.
)
• Your MP3 or WMA files should be ISO 9660 or JOLIET format.
ISO 9660 format and Joliet MP3 or WMA files are compatible with Microsoft's DOS and Windows,
and with Apple's Mac. These two formats are the most widely used.
ENTER
• When naming your MP3 or WMA files do not exceed 8 characters, and place ".mp3, .wma" as
the file extension.
MP3/WMA Play Function
General name format of: Title.mp3. or Title.wma. When composing your title, make sure that you use
8 characters or less, have no spaces in the name, and avoid the use of special characters including:
(.,/,\,=,+).
When the first song file is playing, the music
1 folder menu will appear on the right side of the
• Use a decompression transfer rate of at least 128 Kbps when recording MP3 files.
Sound quality with MP3 files basically depends on the rate of compression/decompression you
choose. Getting audio CD quality sound requires an analog/digital sampling rate, that is conversion to
MP3 format, of at least 128 Kbps and up to 160 Kbps. However, choosing higher rates, like 192 Kbps
or more, only rarely give better sound quality.
screen.
Up to 8 music folders can be displayed at a
time. If you have more than 8 folders on a
disc, press the LEFT/RIGHT buttons to bring
them up on the screen.
ENTER
RETURN
MENU
Conversely, files with decompression rates below 128 Kbps will not be played properly.
• Use a decompression transfer rate of at least 64Kbps when recording WMA files.
Sound quality with WMA files basically depends on the rate of compression/decompression you
choose. Getting audio CD quality sound requires an analog/digital sampling rate, that is conversion to
WMA format, of at least 64Kbps and up to 192Kbps.
Use the UP/DOWN buttons to select the
2 desired music folder, then press ENTER.
Use the UP/DOWN buttons again to select a
song file. Press ENTER to begin playback of
the song file.
Conversely, files with decompression rates below 64Kbps or over 192Kbps will not be played
properly.
• Do not try recording copyright protected MP3 files.
Certain "securized" files are encrypted and code protected to prevent illegal copying. These files are
of the following types: Windows MediaTM (registered trade mark of Microsoft Inc) and SDMITM
(registered trade mark of The SDMI Foundation). You cannot copy such files.
Program/Random playback
PROGRAM
RANDOM
Press the MODE button to switch between the
PROGRAM and RANDOM modes. See page 38
for more information on these modes.
• Important: The above recommendations cannot be taken as a guarantee that the DVD player will
play MP3 recordings, or as an assurance of sound quality.
You should note that certain technologies and methods for MP3 file recording on CD-Rs prevent
optimal playback of these files on your DVD player (degraded sound quality and in some cases,
inability of the player to read the files).
• This unit can play a maximum of 500 files and 300 folders per disc.
NOTE
•
Press the REPEAT button to hear only music continuously and press it once again to release.
• PROGRAM/RANDOM playback cannot be used if the disc contains more than two types of file extensions.
36
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Program Play & Random Play
Picture CD Playback
Open the disc tray.
1
Program Play (CD/MP3/WMA)
Load the disc on the tray.
2 - Load the disc with the labeled side up.
Press the MODE button.
1
PROGRAM
RANDOM
Close the tray.
3 - The tray closes and you should get a screen that looks like the
ENTER
Use the LEFT/RIGHT buttons to select
2 PROGRAM. Press the ENTER button.
one to the right.
•
Select JPEG in the menu to view a Photo CD.
ALBUM
PHOTO: 1 /215
Use the UP/DOWN/LEFT/RIGHT buttons to
• Use the UP/DOWN or LEFT/RIGHT buttons on the remote controller
to select the picture you want to view and then press the ENTER
3 select the first track to add to the program.
button. (Press the PLAY/PAUSE (
in the Slide Show mode.)
) button if you want to play it
Press the ENTER button. The selection
numbers appear in the Program Order box.
PROGRRAM 01
• To see the next 6 pictures, press the
button.
Track
Program Order
Press the PLAY/PAUSE (
) button.
• To see the previous 6 pictures, press the
button.
ENTER
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
01 02 03 04
05 06 07 08
09 10 11 12
13 14 15 16
4 The disc will be played in programmed order.
•
: Return to the Album Screen.
Press the UP/DOWN or LEFT/RIGHT buttons on the
remote controller to display the menu again.
PHOTO: 1 /215
ENTER RETURN
ENTER
RETURN
CLEAR
•
•
•
: Each time the ENTER button is pressed, the picture
rotates 90 degrees clockwise.
: Each time the ENTER button is pressed, the picture is
enlarged up to 2X. (Normal ➝ 2X ➝ Normal)
Random Play (CD/MP3/WMA)
: The unit enters slide show mode.
*Press the RETURN button to return to the album screen.
*Before the Slide Show can begin, the picture interval must be set.
Press the MODE button.
ENTER RETURN
TIMER:
PROGRAM
1
RANDOM
•
•
•
:
When this icon is selected and ENTER is pressed, the pictures
change automatically with about an 6 second interval.
Use the LEFT/RIGHT buttons to select
2 RANDOM. Press the ENTER button.
: The pictures change automatically with about an 12 second
interval.
The disc will be played in random order.
: The pictures change automatically with about an
18 second interval.
*Depending on the file size, each interval between images may take
longer or shorter than the manual suggests.
•
•
To change the currently playing media, press the STOP (
If no button on the remote controller is pressed for 60 seconds,
the menu will disappear and the selected item will be played.
) button twice and then press the DISC MENU button.
NOTE
• Depending on the disc, the Program and Random Play functions may not work.
• To resume normal play, press the CLEAR button.
NOTE
• PROGRAM/RANDOM playback cannot be used if the disc contains more than two types of file extensions.
• This unit can support a maximum of 99 programmed order.
• Press the TITLE MENU button to return to the album screen.
• Press the RETURN button to return to the slide show.
• If no buttons on the remote controller pressed for 10 seconds, the menu will disappear.
Press the UP/DOWN or LEFT/RIGHT buttons on the remote controller to display the menu again.
38
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture CD Playback
Using the Setup Menu
The Setup menu lets you customize your DVD player by allowing you to select various
language preferences, set up a parental level, even adjust the player to the type of
television screen you have.
CD-R JPEG Discs
• Only files with the ".jpg" and ".JPG" extensions can be played.
• If the disc is not closed, it will take longer to start playing and not all of the recorded files may be
played.
With the unit in Stop mode, press the MENU button
DVD
1 on the remote. Select Setup using UP/DOWN
• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
• The name of the JPEG file may not be longer than 8 characters and should contain no blank spaces
or special characters (. / = +).
Disc Menu
buttons, then press the RIGHT or ENTER button.
Title Menu
Language Setup : Setup of the Language.
Function
• Only a consecutively written multisession disc can be played. If there is a blank segment in the
multisession disc, the disc can be played only up to the blank segment.
• A maximum of 500 images can be stored on a single CD.
Setup
Audio Setup : Setup of the Audio Options
• Only Kodak Picture CDs can be played.
Display Setup : Setup of the Display Options
Use to select which type of screen you want to
watch and several display options.
• When playing a Kodak Picture CD, only the JPEG files in the pictures folder can be played.
• Picture discs other than Kodak Picture CD may take longer to start playing or may not play at all.
• If a number of files in 1 Disc is over 500, only 500 JPEG file can be played.
• If a number of folders in 1 Disc is over 300, only JPEG files in 300 folders can be played.
Parental Setup : Setup of the Parental Level
Allows users to set the level necessary to
prevent children from viewing unsuitable movies
such as those with violence, adult subject
matter, etc.
Use the UP/DOWN buttons on the remote to access
2 the different features.
Press the ENTER button to access the sub features.
3
To make the setup screen disappear after setting up, press the
MENU button again.
NOTE
Depending on the disc, some Setup Menu selections may not work.
40
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the Language Features
Setting Up the Language Features
If you set the player menu, disc menu, audio and subtitle language in advance,
they will come up automatically every time you watch a movie.
Using the Audio Language
With the unit in Stop mode, press the MENU button.
1
AUDIO LANGUAGE
Using the Player Menu Language
e.g) Setting up in English.
Select Setup using UP/DOWN buttons, then RIGHT
2 or ENTER button.
Audio
With the unit in Stop mode, press the MENU button.
1
Select Language Setup using UP/DOWN buttons,
Select Setup using UP/DOWN buttons, then RIGHT
Original
Others
3 then press the RIGHT or ENTER button.
2 or ENTER button.
Select Audio using UP/DOWN buttons, then press
Select Language Setup using UP/DOWN buttons,
LANGUAGGE SETUP
4 the RIGHT or ENTER button.
3 then press the RIGHT or ENTER button.
Press the UP/DOWN buttons to select ‘English’ .
Select Player Menu using UP/DOWN buttons, then
5
4 press the RIGHT or ENTER button.
- Select “Original” if you want the default soundtrack language to
be the original language the disc is recorded in.
PLAYER MENU LANGUAGE
Use the UP/DOWN buttons to select ‘English’.
- Select “Others” if the language you want is not listed.
5
6
Player Menu
English
Français
Deutsch
Español
Italiano
Press the ENTER button.
- English is selected and the screen returns to SETUP menu.
- To make the SETUP menu disappear, press the RETURN or
LEFT button.
Press the ENTER button.
6 - English is selected and the screen returns to SETUP menu.
Nederlands
Using the Subtitle Language
Using the Disc Menu Language
With the unit in Stop mode, press the MENU button.
1
SUBTITLE LANGUAGE
Automatic
This function changes the text language only on the disc
menu screens.
Select Setup using UP/DOWN buttons, then RIGHT
2 or ENTER button.
e.g) Setting up in English.
Subtitle
With the unit in Stop mode, press the MENU button.
DISC MENU LANGUAGE
1
Select Language Setup using UP/DOWN buttons,
Others
3
then press the RIGHT or ENTER button.
Disc Menu
Select Setup using UP/DOWN buttons, then RIGHT
2 or ENTER button.
Select Subtitle using UP/DOWN buttons, then press
4 the RIGHT or ENTER button.
Select Language Setup using UP/DOWN buttons,
Others
3 then press the RIGHT or ENTER button.
Use the UP/DOWN buttons to select ‘English’.
NOTE
5
- Select “Automatic” if you want the subtitle language to be the
Select Disc Menu using UP/DOWN buttons, then
• If the selected language is not
recorded on the disc, the original
pre-recorded language is selected.
same as the language selected as the audio preference.
- Select “Others” if the language you want is not listed.
Some discs may not contain the language you select as
your initial language; in that case the disc will use its
original language setting.
4 press the RIGHT or ENTER button.
Use the UP/DOWN buttons to select ‘English’.
- Select “Others” if the language you want is not listed.
•
Howto make the SETUP menu
return to menu screen
5
disappear or
during set up; Press RETURN or
LEFT button.
Press the ENTER button.
- English is selected and the screen returns to SETUP menu.
Press the ENTER button.
- English is selected and the screen returns to SETUP menu.
6
6
42
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the Audio Options
Surround Sound Speaker Setup (DVD-E435 only)
With the unit in Stop mode, press the MENU button.
With the unit in Stop mode, press the MENU button.
1
1
Select Setup using UP/DOWN buttons,
Select Setup using UP/DOWN buttons, then RIGHT
2 or ENTER button.
2 then RIGHT or ENTER button.
Select Audio Setup using UP/DOWN buttons,
3 then press the RIGHT or ENTER button.
Select Audio Setup using UP/DOWN buttons, then
3 press the RIGHT or ENTER button.
Select Multi Channel Output using UP/DOWN
4 buttons. Then select Analog pressing the RIGHT
or ENTER button.
Use the UP/DOWN buttons to select the desired
AUDIO SSETUP
PCM
4 item. Then press the RIGHT or ENTER button.
Use the UP/DOWN buttons to select Speaker Setup.
AUDIO SSETUP
PCM
Dolby Digital Out
MPEG-2 Digital Out
DTS
:
:
:
5 Then press the RIGHT or ENTER button.
PCM
Off
Dolby Digital Out
MPEG-2 Digital Out
DTS
:
:
:
Dolby Digital Out
PCM
Off
Dynamic Compression : On
Use the UP/DOWN or LEFT/RIGHT buttons to select
1. PCM :
PCM Down Sampling
Multi Channel Output
Speaker Setup
: On
Dynamic Compression : On
6 the desired item. Then press the ENTER button.
Converts to PCM(2CH) audio.
Select PCM when using the Analog Audio Outputs.
2. Bitstream :
Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital Audio Output.
: Analog
PCM Down Sampling
Multi Channel Output
Speaker Setup
: On
The default settings : FRONT L, R (Large), CENTER(None),
SURROUND (None)
: Digital
Select the size of the speakers to be connected.
• Front (FL, FR)
AUDIO SSETUP
PCM
• Be sure to select the correct Digital Output
or no audio will be heard.
NOTE
- Large: Normally select this.
Dolby Digital Out
MPEG-2 Digital Out
DTS
:
:
:
MPEG-2 Digital Out
1. PCM :
Converts to PCM(2CH) audio.
Select PCM when using the Analog
Audio Outputs.
PCM
Off
- Small: When the sound cracks or the surround sound effects are
difficult to hear, select this. This activates the Dolby Digital bass
redirection circuitry and outputs the bass frequencies of the speaker
from the subwoofer.
• When Multi Channel Output select Digital.
Dolby & MPEG-2 Digital Out works.
Dynamic Compression : On
PCM Down Sampling
Multi Channel Output
Speaker Setup
: On
DTS
: Analog
1. Off : Doesn’t output digital signal.
2. On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
2. Bitstream :
• Center
Converts to MPEG-2 Digital
Bitstream (5.1CH or 7.1CH).
Select Bitstream when using the
Digital Audio Output.
- None: If you do not connect a center speaker, select this.
- Large: Normally select this.
Dynamic Compression
1. On : To select dynamic compression.
2. Off : To select the standard range.
- Small: When the sound cracks, select this. This activates the Dolby
Digital bass redirection circuitry and outputs the bass frequencies of
the center speaker from other speakers.
PCM Down Sampling
1. On : Select this when the amplifier connected to the player is not 96KHz compatible.
• Surround (SL, SR)
In this case, the 96KHz signals will be down converted to 48KHZ.
- None: If you do not connect a center speaker, select this.
- Large (Rear/Side): Normally select either of these according to the
rear speaker’s position.
2. Off : Select this when the amplifier connected to the player is 96KHz compatible.
In this case, all signals will be output without any changes.
Multi Channel Output (DVD-E435 only)
1. Digital : Select this when using the multichannel digital audio output.
2. Analog : Select this when using the multichannel analog audio output.
- Small (Rear/Side): When the sound cracks or the surround sound
effects are difficult to hear, select either of these according to the
rear speaker’s position. This activates the Dolby Digital bass
redirection circuitry and outputs the bass frequencies of the rear
speaker from other speakers.
NOTE
•
How to make the SETUP
Speaker Setup (DVD-E435 only)
menu disappear or return to
menu screen during set up.
Press RETURN or LEFT button.
• The subwoofer test output
signal is lower than the other
speakers.
• The MPEG Multichannel logo
is a trademark registered by
PHILIPS Corporation.
NOTE
Setting up TEST
The test output signals come clockwise starting from the Front
Speaker(L). Adjust Channel Balance to match to the volume of test
signals memorized in the system.
•
How to make the SETUP menu disappear or return to menu screen during set up;
Press RETURN or LEFT button.
• Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
• “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
FRONT(L)
CENTER
SUBWOOFER
SURROUND(L)
FRONT(R)
SURROUND(R)
44
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the Display Options
Setting Up the Display Options
With the unit in Stop mode, press the MENU button.
TV Aspect
1
2
Depending on the type of television you have, you may want to adjust the screen
setting (aspect ratio).
1. 4:3 Letter Box :
Select when you want to see the total 16:9 ratio screen DVD supplies, even
though you have a TV with a 4:3 ratio screen. Black bars will appear at the top
and bottom of the screen.
Select Setup using UP/DOWN buttons,
then RIGHT or ENTER button.
Select Display Setup using UP/DOWN buttons,
3 then press the RIGHT or ENTER button.
2. 4:3 Pan Scan :
Select this for conventional size TVs when you want to see the central portion of
the 16:9 screen. (Extreme left and right side of movie picture will be cut off.)
3. 16:9 Wide :
Use the UP/DOWN buttons to select the desired
4 item. Then press the RIGHT or ENTER button.
DISPLAAY SETUP
4:3 L-Box
TV Aspect
:
:
:
:
:
:
:
You can view the full 16:9 picture on your widescreen TV.
Still Mode
Auto
Screen Massages
Front Display
Black Level
On
TV Aspect
Auto Dim
Off
Still Mode
These options will help prevent picture shake in still mode and display small text
clearer.
NTSC Disc Output
SCART Output
PAL 60 Hz
RGB
Still Mode
1. Auto : When selecting Auto, Field/Frame mode will be automatically converted.
2. Field : Select this feature when the screen shakes in the Auto mode.
3. Frame : Select this feature when you want to see small letters more clearly in the
Auto mode.
Screen Messages
Front Display
Black Level
TV ASPECT
4:3 Letter Box
4:3 Pan Scan
16:9 Wide
Screen Messages
Use to turn on-screen messages On or Off.
NTSC Disc Output
SCART Output
Front Display
Adjust the brightness of the unit’s front panel display.
1. Auto Dim : Makes the Front Panel Display dim automatically when playing a DVD.
2. Bright : Makes the Front Panel Display bright.
3. Dim : Makes the Front Panel Display dim.
Black Level
Adjusts the brightness of the screen.(On/Off)
NTSC Disc Output
“NTSC” if the screen only has one NTSC-video entrance. If this is not the case,
you can choose to leave “ PAL 60Hz” as is.
SCART Output
1. RGB : Sends RGB signal from the AV JACK(SCART terminal).
2. S-Video : Sends S-VIDEO signal from the AV JACK(SCART terminal).
3. Video : Sends COMPOSITE VIDEO signal from the AV JACK(SCART terminal).
NOTE
•
How to make the SETUP menu disappear or return to menu screen during set up;
Press the RETURN or LEFT button.
46
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the Parental Control
Controlling a TV with the Remote (DVD-E435 only)
The remote can also be set up to control most TVs. To program the remote, use the
code that corresponds to your brand.
The Parental Control function works in conjunction with DVDs that have been assigned
a rating - which helps you control the types of DVDs that your family watches.
There are up to 8 rating levels on a disc.
TV Codes
With the unit in Stop mode, press the MENU button.
1
CODE
01
BRAND
CODE
19
BRAND
SAMSUNG_4
TOSHIBA
Select Setup using UP/DOWN buttons, then RIGHT
2 or ENTER button.
02
SAMSUNG_6, LG, LOEWE, PHILIPS,
FINLUX, YOKO, LOEWE OPTA,
MITSUBISHI, PHONOLA, RADIOLA,
SCHNEIDER
SAMSUNG_1
SAMSUNG_2
SAMSUNG_3
SAMSUNG_5
TOSHIBA
PANASONIC_4
GRUNDIG, BLAUPUNKT, SIEMENS
SHARP
HITACHI
SANYO, AKAI, FISHER
HITACHI, SABA, THOMSON, NORDMENDE
HITACHI, NORDMENDE, SABA,
TELEFUNKEN, THOMSON, BRANDT,
FERGUSON, PIONEER, TELEAVA
SONY
TOSHIBA, SANYO, SHARP, SONY,
MITSUBISHI
TOSHIBA, GRUNDIG, FINLUX
TOSHIBA
20
21
PHILIPS, PHONOLA, RADIOLA
TOSHIBA, GRUNDIG, CGE,
IMPERIAL, MIVAR
Select Parental Setup using UP/DOWN buttons,
22
PHILIPS, SABA, BANG&OLUFSEN,
BRIONVEGA, FINLUX,
FORMENTI, LOEWE OPTA, METZ,
WEGA, PHONOLA, RADIOMARELLI,
SINGER, SINUDYNE
NOKIA, PANASONIC, SABA, PIONEER,
REZ, SELECO, SALORA
HITACHI, NORDMENDE, PANASONIC,
SABA,TELEFUNKEN, THOMSON,
CONTINENTAL, EDISON
PANASONIC_2
PANASONIC_3
PANASONIC_6
TELEFUNKEN
MIVAL
LG_2
SHARP_2
JVC
3 then press the RIGHT or ENTER button.
03
04
05
06
07
08
09
10
11
12
13
14
PARENTALL SETUP
Use RIGHT or ENTER to select Yes if you want to
4 use a password. The Enter Password screen
Use Password
:
No
23
24
appears.
Enter your password. The Re-enter Password
5 screen appears to confirm the password.
ENTER
RETURN
MENU
Enter your password again.
25
26
27
28
29
30
31
32
33
34
The Parental Control screen appears.
CREATE PPASSWORD
About the Rating Level ;
Enter Password
The Rating Level will work only when Use Password
is set to Yes. To unlock the player, use UP/DOWN to
select No. Use RIGHT or ENTER to select Rating
-
-
-
-
15
16
RETURN
0 ~ 9
Level. Press ENTER.
17
18
THOMSON ASIA
THOMSON ASIA
- Use UP/DOWN to select the level(e.g. Level 6) and press
ENTER. Discs that contain Level 7 will now not play.
- To cancel the rating level, use RIGHT or ENTER to select No in
PARENTALL SETUP
Turn on the TV.
If the TV turns off, setup is complete.
Use Password.
1
2
4
Enter other codes of the same brand
if the first code does not work.
Point the DVD’s remote at the TV.
While holding the TV POWER button
About the Change Password ;
- Use UP/DOWN to select Change Password.
Press ENTER. The Change Password screen appears.
- Enter your new password. Re-enter the new password again.
3 down, enter the code for your brand.
To operate the TV, use the “TV Function
5 Buttons” described on page 17.
e.g) Setting up in LEVEL6.
NOTE
e.g) For SAMSUNG 4 TVs
RATING LEVEL
NOTE
Level 8 Adult
Level 7
The remote may not be able to control every model
TV of the brands listed.
While holding down the TV POWER button,
enter 0 and then 1.
•
How to make the SETUP menu disappear or return to
menu screen during set up;
Level 6
Level 5
Level 4
Press RETURN or LEFT button.
• If you have forgotten your password, see Forget Password in
the Troubleshooting Guide.
Level 3
Level 2
Level 1 Kiids Safe
48
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Specifications
Power Requirements
AC 230V, 50 Hz
General
Before requesting service (troubleshooting), please check the following.
AC 110-240V, 50/60 Hz (DVD-E435 only)
12 W
Power Consumption
Weight
Action
Problem
Page
2.4 Kg
•
Check the batteries in the remote. May need replacing.
No operations can be
performed with remote.
Dimensions
430mm (W) X 240mm (D) X 60mm (H)
+5°C to +35°C
• Operate the remote control at a distance of no more than 20 feet.
• Remove batteries and hold down one or more buttons for several
minutes to drain the microprocessor inside the remote to reset it.
Reinstall batteries and try remote again.
P4
Operating Temperature Range
Operating Humidity Range
DVD
10 % to 75 %
Reading Speed : 3.49 m/sec.
Approx. Play Time
Disc
• Ensure that the disc is installed with the label side facing up.
• Check the region number of the DVD.
Disc does not play.
P7
(DIGITAL VERSATILE DISC)
5.1 channel sound is not
being reproduced.
• 5.1 channel sound is reproduced only when the following conditions
are met. :
1) The DVD player is connected with the proper amplifier
2) The disc is recorded with 5.1 channel sound.
• Check whether the disc being played has the “Dolby 5.1 ch” mark
on the outside.
(Single Sided, Single Layer Disc) : 135 min.
Reading Speed : 1.2 to 1.4 m/sec.
Maximum Play Time : 74 min.
Reading Speed : 1.2 to 1.4 m/sec.
Maximum Play Time : 20 min.
Reading Speed : 1.2 to 1.4 m/sec.
Maximum Play Time : 74 min. (Video + Audio)
2 channel : 1.0 Vp-p (75 Ω load)
R(Red) : 0.7 Vp-p (75 Ω load)
G(Green) : 0.7 Vp-p (75 Ω load)
B(Blue) : 0.7 Vp-p (75 Ω load)
Composite Video : 1.0 Vp-p (75 Ω load)
Luminance Signal : 1.0 Vp-p (75 Ω load)
Color Signal : 0.3 Vp-p (75 Ω load)
Luminance Signal : 1.0 Vp-p (75 Ω load)
Chrominance Signal : 0.3 Vp-p (75 Ω load)
2 Channel : L(1/L), R(2/R)
L(1/L), R(2/R)
CD : 12Cm
(COMPACT DISC)
CD : 8Cm
P18
• Check if your audio system is connected and working properly.
• In a SETUP Menu, is the Audio Output set to Bitstream?
P44~45
(COMPACT DISC)
VCD : 12Cm
The
icon appears on
• The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is
out of range.
screen.
P21
Composite Video
SCART Jack
Video
Output
Disc Menu doesn’t appear.
•
Check if the disc has a Menu.
P41~42
P41~48
Play mode differs from the
Setup Menu selection.
• Some of the functions selected in the Setup Menu may not work
properly if the disc is not encoded with the corresponding function.
The screen ratio cannot
be changed.
• The Screen Ratio is fixed on your DVDs.
P46~47
P44~45
S-VIDEO
• Make sure you have selected the correct Digital Output in the Audio
Options Menu.
No audio.
SCART Jack
2 channel
• Press power on from a cold start with no disc in the unit. Press the
Forgot password
STOP (
) and PLAY (
) buttons simultaneously on the front panel
Audio
Output
for three seconds. The Select Menu Language display will appear.
Select the desired language button. Press the MENU button on the
remote control to select the Parental Mode. The Parental Mode is now
unlocked as indicated on the display. Press the DOWN button to select
Parental. Press ENTER and the Create Password display will appear.
You can now set your rating level and change your password to a new
number.
*Frequency Response
48 kHz Sampling : 4 Hz to 22 kHz
96 kHz Sampling : 4 Hz to 44 kHz
110 dB
P48
*S/N Ratio
*Dynamic Range
100 dB
*Total Harmonic Distortion
0.004 %
• Go to the contents and find the section of the instruction book that
contains the explanations regarding the current problem, and follow
the procedure once again.
If you experience other
problems.
*: Nominal specification
• If the problem still cannot be solved, please contact your nearest
authorized service center.
• Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
• Weight and dimensions are approximate.
50
51
Download from Www.Somanuals.com. All Manuals Search And Download.
REPUBLIC OF
IRELAND
UNITED KINGDOM
5. This warranty covers none of the following:
This Samsung product is warranted for the period of twelve (12) months
from the original date of purchase, against defective materials and
workmanship. In the event that warranty service is required, you should
return the product to the retailer from whom it was purchased.
However, Samsung Authorised Dealers and Authorised Service Centers
in other EC Countries will comply with the warranty on the terms issued
to purchasers in the country concerned. In case of difficulty, details of
our Authorised Service Centers are available from:
a) Periodic check ups, maintenance and repair or replacement of
parts due to normal wear and tear.
b) Cost relating to transport, removal or installation of the product.
c) Misuse, including the faiure to use this product for its normal
purposes or incorrect installation.
d) Damage caused by Lightning, Water, Fire, Acts of God, War,
Public Disturbances, incorrect mains voltage, improper ventilation
or any other cause beyond the control of Samsung.
Samsung Electronics (U.K.) Ltd.,
Euro Service Centre, Stafford Park 12,
TELFORD, Shropshire TF3 3BJ,
6. This warranty is valid for any person who legally acquired
possession of the product during the warranty period.
Tel: 0870) 242 0303, Fax: 01952) 297617
7. The consumers statutory rights in any applicable national legislation
whether against the retailer arising from the purchase contract or
otherwise are not affected by this warranty. Unless there is national
legislation to the contrary, the rights under this warranty are the
consumers sole rights and Samsung, its subsidiaries and
distributors shall not be liable for indirect or consequential loss or
any damage to records, compact discs, videos or audio taper or any
other related equipment or material.
➝ WARRANTY CONDITIONS
1.The warranty is only valid if, when warranty service is required, the
warranty card is fully and properly completed and is presented with the
original invoice or sales slip or confirmation, and the serial number on
the product has not been defaced.
2. Samsung’s obligations are limited to the repair or, at its discretion,
replacement of the product or the defective part.
3. Warranty repairs must be carried out by Authorised Samsung Dealers
or Authorised Service Centers. No re-imbursement will be made for
repairs carried out by non Samsung Dealers and, any such repair
work and damage to the products caused by such repair work will not
be covered by this warranty.
SAMSUNG ELECTRONICS (U.K.) LTD.
4. This product is not considered to be defective in materials nor
workmanship by reason that it requires adaptation in order to conform
to national or local technical or safety standards in force in any
Country other than the one for which the product was originally
designed and manufactured. This warranty will not cover, and no
re-imbursement will be made for such adaptation nor any damage
which may result.
52
53
Download from Www.Somanuals.com. All Manuals Search And Download.
|