Samsung DVD Player DVD 1080P7 User Guide

DVD Player  
DVD-1080P7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
This symbol indicates that  
This symbol indicates that there are  
important operating and  
maintenance instructions in the  
literature accompanying this unit.  
dangerous voltage consisting a risk  
of electric shock is present within  
this unit.  
Do not install this equipment in a confined space such as a bookcase or similar unit.  
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS  
APPARATUS TO RAIN OR MOISTURE.  
Note to CATV system installer : This reminder is provided to call CATV system installer’s attention to  
Article 820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I) that  
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be  
connected to the grounding system of the building as close to the point of cable entry as practical.  
Caution : FCC regulations state that any unauthorized changes or modifications to this equipment may  
void the user’s authority to operate it.  
• Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases,  
shall be placed on the apparatus.  
• If this power supply is used at 240V ac, a suitable plug adapter should be used.  
FCC NOTE (for U.S.A):  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to  
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses and can radiate radio frequency  
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to  
radio or television reception, which can be determined by turning the equipment off and on.  
The user is encouraged to try to correct the interference by one or more of the following measures.  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect this equipment into an outlet on a circuit different from that to which the receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
This class B digital apparatus meets all requirements of the Canadian Interference --  
Causing Equipment Regulations.  
CALIFORNIA USA ONLY :  
This Perchlorate warning applies only to primary CR (Maganese Dioxide) Lithium coin cells in the product sold  
or distributed ONLY in California USA “Perchlorate Material - special handling may apply , See  
CLASS 1  
LASER PRODUCT  
KLASSE 1 LASER PRODUKT  
LUOKAN 1 LASER LAITE  
KLASS 1  
LASER APPARAT  
PRODUCTO LÁSER CLASE 1  
ENG-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTION  
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR  
PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN  
HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR  
YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.  
Note:  
This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere.  
• This DVD player is designed and manufactured to respond to the Region Management Information.  
If the Region number of a DVD disc does not correspond to the Region number of this DVD player,  
the DVD player cannot play the disc.  
• The product unit accompanying this user manual is licensed under certain intellectual property rights  
of certain third parties. In particular, this product is licensed under the following US patents:  
5,060,220 5,457,669 5,561,649 5,705,762 5,987,417 6,043,912 6,222,983 6,272,096 6,377,524  
6,377,531 6,385,587 6,389,570 6,408,408 6,466,532 6,473,736 6,477,501 6,480,829 6,556,520  
6,556,521 6,556,522 6,578,163 6,594,208 6,631,110 6,658,588 6,674,697 6,674,957 6,687,455  
6,697,307 6,707,985 6,721,243 6,721,493 6,728,474 6,741,535 6,744,713 6,744,972 6,765,853  
6,765,853 6,771,890 6,771,891 6 775,465 6,778,755 6,788,629 6,788,630 6,795,637 6,810,201  
6,862,256 6,868,054 6,894,963 6,937,552.  
This license is limited to private non-commercial use by end-user consumers for licensed contents.  
No rights are granted for commercial use. The license does not cover any product unit other than this  
product unit and the license does not extend to any unlicensed product unit or process conforming to  
ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this product unit.  
The license only covers the use of this product unit to encode and/or decode audio files conforming  
to the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product  
features or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.  
Handling Cautions  
Before connecting other components to this player, be sure to turn them all off.  
• Do not move the player while a disc is being played, or the disc may be scratched or broken, and the player’s  
internal parts may be damaged.  
• Do not put a flower vase filled with water or any small metal objects on the player.  
• Be careful not to put your hand into the disc tray.  
• Do not place anything other than the disc in the disc tray.  
• Exterior interference such as lightning and static electricity can affect normal operation of this player.  
If this occurs, turn the player off and on again with the POWER button, or disconnect and then reconnect the  
AC power cord to the AC power outlet. The player will operate normally.  
• Be sure to remove the disc and turn off the player after use.  
• Disconnect the AC power cord from the AC outlet when you don’t intend to use the player for long  
periods of time.  
• Clean the disc by wiping in a straight line from the inside to the outside of the disc.  
• The Main plug is used as a disconnect device and shall stay readily operable at any time.  
Disc Storage  
Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment.  
• Do not keep under direct sunlight.  
• Keep in a cool ventilated area.  
• Store vertically.  
• Keep in a clean protection jacket.  
Maintenance of Cabinet  
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.  
• Do not use benzene, thinner, or other solvents for cleaning.  
• Wipe the cabinet with a soft cloth.  
ENG-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before you start  
Accessories  
-
+
-
/
Remote  
Control  
Batteries for  
Remote Control  
(AAA Size)  
User’s Manual  
(AK68-01341A)  
Video/Audio  
Cable  
(AC39-42001R)  
(AK59-00061H)  
(AC43-12002H)  
Install Batteries in the Remote control  
1
Open the battery  
cover on the back of  
the remote control.  
2
Insert two AAA batteries.  
Make sure that the  
polarities (+ and -) are  
aligned correctly.  
3
Replace the battery  
cover.  
If the remote control doesn’t operate properly:  
- Check the polarity + - of the batteries.  
- Check if the batteries are drained.  
- Check if the remote control sensor is blocked by obstacles.  
- Check if there is any fluorescent lighting nearby.  
ENG-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Chapter 1: Setup  
General Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Disc Type and Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Tour of the Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Chapter 2: Connections  
Connecting to a TV with HDMI Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Connecting to a TV with DVI Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Connecting to a TV (Progressive) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Connecting to a TV (Interlace) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Connecting to a TV (S-Video). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Connecting to a TV (Video) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Connecting to an Audio System (2 Channel Amplifier) . . . . . . . . . . . . . 18  
Connecting to an Audio System (Dolby Digital, MPEG2 or DTS Amplifier) . 19  
Chapter 3: Basic Functions  
Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
Using the Search and Skip Functions . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Using the Display Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Using the Disc and Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Using the Function Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Slow Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Chapter 4: Advanced Functions  
Adjusting the Aspect Ratio (EZ View). . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
Selecting the Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
Selecting the Subtitle Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Changing the Camera Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Using the Instant Replay/Skip Function . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Using the Bookmark Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Using the Zoom Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
Clips Menu for MP3/WMA/JPEG/MPEG4/CD Audio . . . . . . . . . . . . . . . 37  
Folder Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
MP3/WMA/CD Audio Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38  
MPEG4 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
Picture CD Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
Chapter 5: Navigating the Setup Menu  
Using the Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44  
Setting Up the Language Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45  
Setting Up the Audio Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50  
Setting Up the Display Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52  
Setting Up the Parental Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55  
Setting Up the Anynet+(HDMI-CEC) . . . . . . . . . . . . . . . . . . . . . . . . . . . 57  
Chapter 6: Reference  
Firmware Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62  
ENG-6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1  
SETUP  
Note  
General Features  
- Discs which cannot be played with this  
player.  
Excellent Sound  
• DVD-ROM  
• CD-ROM  
• CDI  
• DVD-RAM  
• CDV  
• CVD  
Dolby Digital, a technology developed by Dolby  
Laboratories, provides crystal clear sound  
reproduction.  
• Super Audio CD(except CD layer)  
• CDGs play audio only, not graphics.  
Screen  
Both regular and widescreen(16:9) pictures can be  
viewed.  
- Ability to play back may depend on recording  
conditions.  
Slow Motion  
An important scene can be viewed in slow motion.  
• DVD-R, +R  
• CD-RW  
• DVD+RW, -RW (V mode)  
- The unit may not play certain CD-R, CD-RW  
and DVD-R due to the disc type or recording  
conditions.  
1080p Playback  
This player upconverts regular DVDs for playback on  
1080p TVs.  
Parental Control (DVD)  
The parental control allows users to set the level  
necessary to prohibit children from viewing harmful  
movies such as those with violence, adult subject  
matter, etc.  
COPY PROTECTION  
Many DVD discs are encoded with copy  
Various On-Screen Menu Functions  
You can select various languages (Audio/Subtitle)  
and screen angles while enjoying movies.  
protection. Because of this, you should only connect  
your DVD player directly to your TV, not to a VCR.  
Connecting to a VCR results in a distorted picture  
from copy-protected DVD discs.  
Progressive Scan  
Progressive scanning creates an improved picture  
with double the scan lines of a conventional  
interlaced picture.  
This product incorporates copyright protection  
technology that is protected by methods claims of  
certain U.S. patents and other intellectual property  
rights owned by Macrovision Corporation and other  
rights owners. Use of this copyright protection  
technology must be authorized by Macrovision  
Corporation, and is intended for home and other  
limited viewing uses only unless otherwise authorized  
by Macrovision Corporation. Reverse engineering or  
disassembly is prohibited.  
EZ VIEW (DVD)  
Easy View enables picture adjustment to match your  
TV's screen size (16:9 or 4:3).  
Digital Photo Viewer (JPEG)  
You can view Digital Photos on your TV.  
Repeat  
You can repeat a song or movie simply by pressing  
the REPEAT button.  
PROGRESSIVE SCAN OUTPUTS  
(480p, 720p, 1080p)  
MP3/WMA  
This unit can play discs created from MP3/WMA files.  
“CONSUMERS SHOULD NOTE THAT NOT ALL HIGH  
DEFINITION TELEVISION SETS ARE FULLY  
COMPATIBLE WITH THIS PRODUCT AND MAY  
CAUSE ARTIFACTS TO BE DISPLAYED IN THE  
PICTURE, IF PROGRESSIVE SCAN PICTURE  
PROBLEMS OCCUR, IT IS RECOMMENDED THAT  
THE USER SWITCH THE CONNECTION TO THE  
‘STANDARD DEFINITION’ (VIDEO OR S-VIDEO)  
OUTPUT. IF THERE ARE QUESTIONS REGARDING  
YOUR TV SET COMPATIBILITY WITH THIS DVD  
PLAYER, PLEASE CONTACT SAMSUNG'S  
CUSTOMER SERVICE CENTER.”  
Instant Replay (DVD)  
This function is used to replay the previous 10  
seconds of a movie from the current position.  
Instant Skip (DVD)  
This function skips playback ahead 10 seconds.  
MPEG4  
This unit can play MPEG4 formats within an avi file.  
HDMI (High Definition Multimedia  
Interface)  
HDMI reduces picture noise by allowing a pure  
digital video/audio signal path from the player to  
your TV.  
ENG-7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP  
Disc Type and Characteristics  
This DVD player is capable of playing the following types of discs with the corresponding logos:  
Recording Types  
Disc Size  
Max. Playing Time  
Characteristics  
Disc Types (Logos)  
-
-
DVD contains excellent sound and  
video due to Dolby Digital and  
MPEG-2 system.  
Single-sided 240 min.  
Double-sided 480 min.  
DVD  
5”  
Audio  
+
Video  
Various screen and audio functions  
can be easily selected through the  
on-screen menu.  
Single-sided 80 min.  
Double-sided 160 min.  
3 1/2”  
AUDIO-CD  
74 min.  
20 min.  
5”  
-
CD is recorded as a Digital Signal with  
better audio quality, less distortion and  
less deterioration of audio quality over  
time.  
Audio  
3 1/2”  
Disc Markings  
Region Number  
~
Play Region Number  
Both the DVD player and the discs are  
coded by region. These regional  
codes must match in order for the disc  
to play. If the codes do not match, the  
disc will not play.  
NTSC broadcast system in U.S.A, Canada, Korea,  
Japan, etc.  
NTSC  
Dolby Digital disc  
Stereo disc  
STEREO  
The Region Number for this player  
is described on the rear panel of the  
player.  
DIGITAL  
SOUND  
Digital Audio disc  
DTS disc  
MP3 disc  
DivX Certification  
DivX, DivX Certified,  
You must only insert one DVD disc at a time.  
Inserting two or more discs will not allow  
playback and may cause damage to the DVD  
player.  
and associated logos are  
trademarks of DivXNetworks, Inc and  
are used under license  
ENG-8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP  
Description  
Front Panel Controls  
10  
7
9
OPEN/CLOSE  
1
2
4
5
3
6
8
6. VIDEO SEL.  
Press to change Video Output mode.  
1. STANDBY/ON (  
)
When STANDBY/ON is pressed on, the indicator goes out  
and the player is turned on.  
7. STOP (  
)
Stops disc play.  
2. STANDBY Indicator  
When the unit is first plugged in, this indicator lights up.  
8. SKIP ( ) / SEARCH  
Use to forward skip a scene or music.  
3. DISC TRAY  
Place the disc here.  
9. SKIP ( ) / SEARCH  
Use to reverse skip a scene or music.  
4. OPEN/CLOSE (  
)
Press to open and close the disc tray.  
10. PLAY/PAUSE (  
Begin or pause disc play.  
)
5. DISPLAY  
Operation indicators are displayed here.  
Front Panel Display  
Displays the Total playing time and  
various messages concerning  
operations such as PLAY, STOP, LOAD ...  
NOdSC: No disc loaded.  
OPEn: The disc tray is open.  
LOAd: Player is loading disc information.  
ENG-9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP  
Rear Panel  
1
2
1
3
4
5
6
1. DIGITAL AUDIO OUT JACKS  
-
4. VIDEO OUT JACK  
-
Use either an optical or coaxial digital cable to connect  
to a compatible Dolby Digital receiver.  
Use a video cable to connect to the Video input jack on  
your television.  
-
Use either an optical or coaxial digital cable to connect  
to an A/V Amplifier that contains a Dolby Digital,  
MPEG2 or DTS decoder.  
5. S-VIDEO OUT JACK  
-
Use an S-Video cable to connect this jack to the  
S-Video jack on your television for higher picture  
quality.  
2. COMPONENT VIDEO OUT JACKS  
-
-
-
Use these jacks if you have a TV with Component  
6. HDMI OUT JACK  
-
R
B
Video in jacks. These jacks provide P , P and Y video.  
If P-SCAN is set to “ON” in Video Output of the Setup  
Menu, progressive scan mode will work.  
Use an HDMI cable to connect this jack to the HDMI  
jack on your television for the best quality picture.  
If an HDMI cable is connected to an HDMI-compatible  
TV, HDMI will be output automatically from the player  
about 10 seconds later.  
-
If I-SCAN is set to “ON” in Video Output of the Setup  
Menu, interlaced scan mode will work.  
3. AUDIO OUT JACKS  
Use audio cables to connect to the Audio input jacks of  
your television or audio/video receiver  
Note  
- Consult your TV User’s Manual to find out if your TV supports Progressive Scan (P-SCAN).  
If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the  
TV’s menu system.  
- The HDMI output of this unit can be connected to a DVI jack on a TV or other device using a conversion  
adapter. In this case, it is necessary to use a TV or display with an HDCP-compatible DVI input.  
- Refer to the TV's instruction manual for detailed information regarding the TV’s HDMI input jack.  
- See pages 52 ~ 54 to get more information on how to use the setup menu.  
ENG-10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP  
Tour of the Remote Control  
7. INSTANT REPLAY Button  
This function is used to replay the previous 10 seconds of  
a movie from the current position  
17  
18  
-
1
2
8. SKIP Buttons (  
)
/
Use to skip the title, chapter or track.  
3
19  
20  
9. STOP Button (  
10. TV VOL (+, -) Buttons  
)
Control volume.  
11. MENU Button  
Brings up the DVD player’s menu.  
4
12. ENTER/œ ƒ ¦ ‹ Buttons  
/ , /  
This button functions as a toggle switch.  
21  
22  
5
6
13. EZ VIEW Button  
The aspect ratio of a picture can easily be adjusted  
according to the screen size of your TV (16:9 or 4:3).  
7
8
9
14. DISC MENU Button  
Brings up the Disc menu.  
23  
24  
15. SUBTITLE Button  
+
/
16. AUDIO Button  
10  
11  
12  
Use this button to access various audio functions on a disc.  
17. REPEAT A-B Button  
Allows you to repeat play A-B on a disc.  
18. REPEAT Button  
Allows you to repeat play a title, chapter, track, or disc.  
19. TV POWER Button  
-
25  
26  
Turns the TV’s power on or off.  
20. OPEN/CLOSE ( ) Button  
To open and close the disc tray.  
13  
14  
27  
28  
21. STEP Button  
Advances play one frame at a time.  
29  
30  
15  
16  
22. INSTANT SKIP Button  
This function skips playback ahead 10 seconds.  
23. PLAY/PAUSE Button (  
Begin/Pause disc play.  
)
24. TV CH (  
,
) Buttons  
Channel selection.  
25. TV/VIDEO Button  
Press to display all of the available video sources  
( i.e., TV, Cable, Video)  
26. RETURN Button  
Returns to a previous menu.  
1. VIDEO SEL. Button  
Selects video output formats  
2. HDMI SEL. Button  
HDMI Output resolution setup.  
27. EXIT Button  
Exit the on-screen menu.  
3. DVD POWER Button  
Turns the power on or off.  
28. CANCEL Button  
Use to remove menus or status displays from the screen.  
29. ZOOM Button  
4. NUMBER Buttons  
5. BOOKMARK Button  
Enlarges the DVD Picture  
6. SEARCH Buttons (  
)
/
30. INFO Button  
Displays the current disc mode.  
Allow you to search forward/backward through a disc.  
ENG-11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2  
CONNECTIONS  
Chossing a Connection  
The following shows examples of connections commonly used to connect the DVD player with a TV  
and other components.  
Before Connecting the DVD Player  
- Always turn off the DVD player, TV, and other components before you connect or disconnect any  
cables.  
- Refer to the user’s manual of the additional components (such as a TV) you are connecting for  
more information on those particular components.  
Connecting to a TV with HDMI Jack  
1
Using an HDMI-HDMI cable (not included) connect the HDMI  
OUT jack on the rear of the DVD player to the HDMI IN jack of  
your TV.  
2
Press the input selector button on your TV remote control until  
the HDMI signal from the DVD player appears on your TV  
HDMI cable  
(Not Included)  
screen.  
Connecting to a TV with DVI Jack  
1
Using an HDMI-DVI cable (not included), connect the HDMI  
OUT jack on the rear of the DVD player to the DVI IN jack of  
your TV.  
2
Using the audio cables, connect the AUDIO (red and white)  
OUT jacks on the rear of the DVD player to the AUDIO  
(red and white) IN jacks of your TV.  
Turn on your DVD player and TV.  
WHITE  
RED  
RED  
Audio Cable  
(Included)  
WHITE  
HDMI-DVI cable  
(Not Included)  
3
Press the input selector button on your TV remote control until  
the DVI signal from the DVD player appears on your TV screen.  
ENG-12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
HDMI VIDEO Specifications  
When you press the HDMI SEL. button, the 480p, 720p, 1080i and 1080p resolutions are selected in order.  
The first press of the HDMI SEL. button, brings up the current resolution.  
The second press allows you to change the HDMI output resolution.  
- Depending on your TV, certain HDMI output resolutions may not work.  
- Please refer to the user's manual of your TV.  
- If an HDMI or HDMI-DVI cable is plugged into TV, the DVD player’s output is set to HDMI automatically about  
10 seconds later.  
- For better picture quality, set the HDMI output resolution to 720p, 1080i or 1080p .  
- When using an HDMI connection, S-Video will not be output.  
- This player upconverts regular DVDs for playback on 1080p TVs. It does not play HD DVDs or Blu-Ray discs.  
- If you connect an HDMI cable between Samsung TV and this DVD player, you can operate this DVD player  
using your TV remote control. This is only available with Samsung TVs that support Anynet+(HDMI-  
CEC).(see page 56-57)  
- If your TV has an  
logo, then it will  
supports the Anynet+ function.  
HDMI (High Definition Multimedia Interface)  
HDMI enables you to make a digital video and audio connection with a single cable.  
Using HDMI, the DVD player transmits a digital video and audio signal which displays a vivid picture on a  
TV having an HDMI input jack.  
HDMI connection description  
HDMI connector - Video and audio are transferred digitally without compression (LPCM or Bit Stream  
data).  
- The player outputs a pure digital signal to the TV through an HDMI cable.  
- If your TV does not support HDCP (High-bandwidth Digital content protection), snow noise appears on  
the screen.  
Why does Samsung use HDMI?  
Analog TVs require an analog video/audio signal. However, when playing a DVD, the signal transmitted to  
a TV is digital. Therefore either a digital-to-analog converter (in the DVD player) or an analog-to-digital  
converter (in the TV) is required. During this conversion, the picture quality is degraded due to noise and  
signal loss. HDMI technology is superior because it requires no D/A conversion and is a pure digital signal  
from the player to your TV.  
What is the HDCP?  
HDCP (High-bandwidth Digital Content Protection) is a system for protecting DVD content output via  
HDMI/DVI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and  
a display device (TV, projector . etc). Content is encrypted at the source device to prevent unauthorized  
copies from being made.  
ENG-13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
Connecting to a TV (Progressive)  
- Connecting to your TV using Component video cables. The 480p resolution is possible with this  
connection.  
- What is "Progressive Scan"?  
Progressive scan has twice as many scanning lines as the interlace output method.  
Progressive scanning method provides better and clearer picture quality.  
1
Using Component video cables (not included), connect the  
COMPONENT VIDEO OUT jacks on the rear of the DVD player  
to the COMPONENT IN jacks of your TV.  
2
RED  
GREEN  
BLUE  
Using the audio cables, connect the AUDIO (red and white)  
OUT jacks on the rear of the DVD player to the AUDIO (red  
and white) IN jacks of your TV.  
Turn on the DVD player and TV.  
3
RED  
WHITE  
Set the Video Output to P-SCAN in the Display Setup menu.  
(See pages 52 to 54)  
Audio Cable  
(Included)  
You can also use the VIDEO SEL. button to change the Video  
Output mode. (See page 12)  
RED  
WHITE  
Component cable  
(not included)  
GREEN  
RED  
BLUE  
4
Press the input selector button on your TV remote control until  
the Component signal from the DVD player appears on the TV  
screen.  
To see the progressive video output,  
- Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive  
Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s  
menu system.  
- Depending on your TV, the connection method may differ from the illustration above.  
ENG-14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
Connecting to a TV (Interlace)  
- Connecting to your TV using Component video cables. The 480i resolution is possible with this  
connection.  
- This is the best available connection if your TV is not capable of receiving a Progressive Scan  
signal.  
- You will enjoy excelllent quality and accurate color reproduction images. Component video  
B
R
separates the picture element into black and white(Y), blue(P ), red(P ) signals to present clear  
and clean images. (Audio signals are delivered through the audio output.)  
1
Using Component video cables (not included), connect the  
COMPONENT VIDEO OUT jacks on the rear of the DVD player  
to the COMPONENT IN jackls of your TV.  
2
RED  
BLUE  
GREEN  
Using the audio cables, connect the AUDIO (red and white)  
OUT jackls on the rear of the DVD player to the AUDIO (red  
and white) IN jackls of your TV.  
Turn on your DVD player and TV.  
3
RED  
WHITE  
Set the Video Output to I-SCAN in the Display Setup menu.  
(See pages 52 to 54)  
Audio Cable  
(Included)  
Component cable  
(not included)  
You can also use the VIDEO SEL. button to change the Video  
Output mode. (See page 12)  
RED  
WHITE  
RED  
BLUE GREEN  
4
Press the input selector on your TV remote control until the  
Component signal from the DVD player appears on the TV  
screen.  
Note  
- If the Video output is incorrectly set to S-Video with the Component cables connected, the screen  
will turn black automatically about 10 seconds later.  
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 18 to 19)  
R
B
- The component jack of your TV may be marked “R-Y, B-Y, Y” or “Cr, Cb, Y” instead of “P , P , Y”  
depending on the manufacturer. The number and position of the jacks may vary depending on the TV set.  
Please refer to the user's manual of your TV.  
- When using an HDMI connection, S-Video will not be output.  
ENG-15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
Connecting to a TV (S-Video)  
- Connecting to your TV using an S-Video cable.  
- You will enjoy high quality images. S-Video separates the picture element into black and white(Y)  
and color(C) signals to present clearer images than regular video input mode. (Audio signals are  
delivered through the audio output.)  
1
Using an S-Video cable (not included), connect the S-VIDEO  
OUT jack on the rear of the DVD player to the  
S-VIDEO IN jack of your TV.  
2
Using the audio cables, connect the AUDIO (red and white)  
OUT jacks on the rear of the DVD player to the AUDIO (red  
and white) IN jacks of your TV.  
Turn on your DVD player and TV.  
3
RED  
WHITE  
Set the Video Output to S-Video in the Display Setup menu.  
(See pages 52 to 54)  
S-Video Cable  
(not included)  
Audio Cable  
(Included)  
You can also use the VIDEO SEL. button to change the Video  
Output mode. (See page 12)  
WHITE  
RED  
4
Press the input selector button on your TV remote control until  
the S-Video signal from the DVD player appears on your TV  
screen.  
Note  
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 18 to 19)  
- The number and position of the jacks may vary depending on the TV set.  
Please refer to the user's manual of your TV.  
- Please do not connect the S-Video and Component Video (Y, Pb, Pr) outputs simultaneously, as they may  
interfere and degrade both video outputs quality.  
- When using an HDMI connection, S-Video will not be output.  
ENG-16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
Connecting to a TV (Video)  
1
Using Video/Audio cables, connect the VIDEO (yellow)/AUDIO  
(red and white) OUT jacks on the rear of the DVD player to the  
VIDEO (yellow)/AUDIO (red and white) IN jacks of your TV.  
2
Turn on your DVD player and TV.  
RED  
RED  
WHITE  
YELLOW  
Audio Cable  
(Included)  
Video Cable  
(Included)  
3
WHITE  
YELLOW  
Set the Video Output to S-VIDEO in the Display Setup menu.  
(See pages 52 to 54).  
You can also use the VIDEO SEL. button to change the Video  
Output mode. (See page 12)  
4
Press the input selector button on your TV remote control until  
the Video signal from the DVD player appears on the TV  
screen.  
Note  
- Noise may be generated if the audio cable placed too close to the power cable.  
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 18 to 19)  
- The number and position of the jacks may vary depending on your TV set. Please refer to the user's manual  
of your TV.  
- If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) jack of the DVD  
player.  
- If you press the VIDEO SEL. button when the DVD Player is in stop mode or no disc is inserted, the Video  
Output mode changes in the following sequence: (COMPOSITE/S-Video I-SCAN P-SCAN).  
When HDMI is connected, these output modes will not appear.  
- When using an HDMI connection, S-Video will not be output.  
ENG-17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
Connecting to an Audio System (2 Channel Amplifier)  
1
Using the audio cables, connect the AUDIO (red and white)  
OUT jacks on the rear of the DVD player to the AUDIO (red  
and white) IN jacks of the Amplifier.  
2
Using the video signal cable(s), connect the VIDEO, S-VIDEO,  
COMPONENT or HDMI OUT jacks on the rear of the DVD  
player to the VIDEO, S-VIDEO, COMPONENT or HDMI-DVI IN  
jacl of your TV as described on pages 12 to 16.  
3
RED  
WHITE  
Turn on your DVD player, TV, and Amplifier.  
Audio Cable  
(Included)  
WHITE  
RED  
2-Channel stereo amp  
4
Press the input select button of the Amplifier to select the audio  
input your DVD player is connected to in order to hear sound.  
Refer to your Amplifier's user manual to set the Amplifier's  
audio input.  
Note  
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause  
damage to the speakers and your ears.  
- Please set the audio in the menu screen according to the Amplifier.(See pages 50 to 51)  
- The position of jacks may vary depending on the Amplifier.  
Please refer to the user's manual of the Amplifier.  
ENG-18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
Connecting to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)  
1
If using an Optical cable (not included), connect the DIGITAL  
AUDIO OUT (OPTICAL) jack on the rear of the DVD player to  
the DIGITAL AUDIO IN (OPTICAL) jack of the Amplifier.  
If using a Coaxial cable (not included), connect the DIGITAL  
AUDIO OUT (COAXIAL) jack on the rear of the DVD player to  
the DIGITAL AUDIO IN (COAXIAL) jack of the Amplifier.  
2
Using the video signal cable(s), connect the VIDEO, S-VIDEO,  
COMPONENT or HDMI OUT jacks on the rear of the DVD  
player to the VIDEO, S-VIDEO, COMPONENT or HDMI-DVI IN  
jacks of your TV as described on pages 12 to 16.  
Coaxial Cable  
(not included)  
or  
Optical Cable  
(not included)  
3
Turn on your DVD player, TV, and Amplifier.  
Dolby digital or  
DTS amp  
4
Press the input select button of the Amplifier to select the audio  
input your DVD player is connected to in order to hear sound.  
Refer to your Amplifier's user manual to set the Amplifier's  
audio input.  
Note  
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause  
damage to the speakers and your ears.  
- Please set the audio in the menu screen according to the Amplifier you have connected. (See pages 50 to 51)  
- The position of jacks may vary depending on the Amplifier.  
Please refer to the user's manual of the Amplifier.  
- Please remove the dust cover before using the optical cable (not included) and put the cover on the cable  
again when it's not used.  
ENG-19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3  
BASIC FUNCTIONS  
Playing a Disc  
Before Play  
- Turn on your TV and set it to the Video Input your DVD player is connected to with your TV’s  
remote control.  
- If you connected the DVD player to an external Audio System, turn on your Audio System and set  
it to the correct Audio Input.  
After plugging in the player, the first time you press the DVD POWER button, the screen  
to the right appears: If you want to select a language, press a NUMBER button.  
(This screen will only appear when you plug in the player for the first time.)  
If the language for the startup screen is not set, the settings may change whenever you  
turn the power on or off. Therefore, make sure that you select the language you want to  
use.  
Once you select a menu language, you can change it by pressing the  
button on the  
front panel of the unit for more than 5 seconds with no disc in the unit. Then the  
SELECT MENU LANGUAGE window appears again where you can reset your  
preferred language.  
Playback  
1
Press the OPEN/CLOSE  
(
) button.  
-
The STANDBY indicator  
light goes out and the tray  
opens.  
2
Place a disc gently into the  
tray with the disc’s label  
facing up.  
RESUME function  
3
When you stop disc play, the player remembers  
where you stopped, so when you press the  
PLAY/PAUSE ( ) button again, it will pick up  
where you left off.  
Press the PLAY/PAUSE (  
button or OPEN/CLOSE (  
button to close the disc tray.  
)
)
+
/
ENG-20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC FUNCTIONS  
Note  
4
- If the player is left in the stop mode for more than  
one minute without pressing any buttons, a  
screen saver will be activated. Press the  
Stopping Play  
Press the STOP ( ) button  
during play.  
PLAY/PAUSE ( ) button to resume normal play.  
- If the player is left in the stop mode for more than  
30 minutes, the power will automatically turn off.  
+
/
5
-
Removing the Disc  
Press the OPEN/CLOSE  
(
) button.  
Screen stops, no sound.  
To resume, press the PLAY/PAUSE ( ) button  
once again.  
6
Pausing Play  
Press the PLAY/PAUSE  
(
) or STEP button on the  
remote control during play.  
Note  
If the player is left for about 5 minutes in pause  
mode, it will stop.  
+
/
Each time the button is pressed, a new frame  
will appear.  
No sound is heard during STEP mode.  
Press the PLAY/PAUSE ( ) button to resume  
normal play.  
You can only perform step motion play in the  
forward direction.  
7
Step Motion Play (Except  
CD)  
Press the STEP button on  
the remote control during  
play.  
No sound is heard during slow mode.  
Press the PLAY/PAUSE ( ) button to resume  
normal play.  
8
Slow Motion Play  
Press the SEARCH (  
)
/
button to choose the play  
speed between 1/8, 1/4 and  
1/2 of normal speed during  
PAUSE or STEP mode.  
Note  
- The ( ) icon indicates an invalid button press.  
- This player does not play HD DVDs or Blu-Ray  
discs.  
ENG-21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC FUNCTIONS  
Using the Search and Skip Functions  
During play, you can search quickly through a chapter or track, and use the skip function to jump to  
the next selection.  
Searching through a Chapter or Track  
If you want to search at a faster speed on the  
DVD or CD, press and hold the button.  
During play, press the  
SEARCH ( or  
) button  
DVD 2X, 4X, 64X, 128X  
on the remote control for  
more than 1 second.  
CD  
2X, 4X, 8X  
+
/
Note  
- The speed marked in this function may be  
different from the actual playback speed.  
- No sound is heard during search mode  
(Except CD).  
Skipping Tracks  
During play, press the SKIP  
(
or  
) button.  
+
/
- When playing a DVD, if you press the SKIP (  
)
button, it moves to the next chapter. If you press  
the SKIP ( ) button, it moves to the beginning  
of the chapter. Pressing the Skip button twice  
makes the DVD move to the beginning of the  
previous chapter.  
- When playing a CD, if you press the SKIP (  
button, it moves to the next track. If you press  
)
the SKIP ( ) button, it moves to the beginning  
of the track. Pressing the Skip button twice  
makes the DVD move to the beginning of the  
previous track.  
ENG-22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC FUNCTIONS  
Using the Display Function  
When Playing a DVD/MPEG4  
You can select Info in the function menu by  
pressing the MENU button.  
1
During play, press the  
INFO button on the remote  
control.  
DVD  
2
Press the œ/ƒ buttons to  
DVD  
001  
select the desired item.  
Title  
002  
Chapter  
00:00:13  
Time  
ENG 5.1CH  
Audio  
Off  
Subtitle  
Enter  
MPEG4  
001  
00:00:13  
MP3 1/8  
Off  
Enter  
You may use the number buttons of the remote  
control to directly access a title, chapter or to  
start the playback from a desired time.  
3
Press the ¦/buttons to  
make the desired setup and  
then press the ENTER  
button.  
4
To make the screen  
disappear, press the INFO  
button again.  
ENG-23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC FUNCTIONS  
Note  
To access the desired title when there is more than one in the disc.  
For example, if there is more than one movie on a DVD, each movie will be identified.  
Title  
Chapter  
Most DVD discs are recorded in chapters so that you can quickly find a specific passage (similar to  
tracks on an audio CD).  
Allows playback of the film from a desired time. You must enter the starting time as a reference.  
The time search function does not operate on some discs.  
Time  
Audio  
Refers to the film's soundtrack language. In the example, the soundtrack is played in English 5.1CH.  
A DVD disc can have up to eight different soundtracks.  
Refers to the subtitle languages available in the disc.  
Subtitle You will be able to choose the subtitle languages or, if you prefer, turn them off from the screen.  
A DVD disc can have up to 32 different subtitles.  
Using the Disc and Title Menu  
Using the Disc Menu  
1
-
During the playback of a  
DVD disc, press the MENU  
button on the remote  
control.  
Note  
- Depending on a disc, the Disc Menu may not  
work.  
- You can also select the Disc Menu, using the  
DISC MENU button on the remote control.  
2
Press the œ/ƒ buttons to  
select Disc Menu, then  
press the or ENTER  
button.  
Press ENTER key  
for Disc Menu  
Enter  
Return  
Menu  
ENG-24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC FUNCTIONS  
Using the Title Menu  
1
-
During the playback of a  
DVD disc, press the MENU  
button on the remote  
control.  
2
Press the œ/ƒ buttons to  
select Title Menu, then  
press the or ENTER  
button.  
Press ENTER key  
for Title Menu  
Note  
- Depending on a disc, the Title Menu may not  
work.  
Return  
Enter  
Menu  
- Title Menu will only be displayed if there are at  
least two titles in the disc.  
Using the Function Menu  
Using the Function Menu (DVD)  
1
-
Press the MENU button  
during playback.  
2
Info  
Press the œ/ƒ buttons to  
select Function, then press  
the or ENTER button.  
- Info (See pages 23 to 24)  
- Zoom (See page 36)  
- Bookmark  
Zoom  
Bookmark  
Repeat  
EZ View  
Angle  
Return  
Enter  
Menu  
(See pages 34 to 35)  
- Repeat (See pages 26)  
- EZ View  
(See pages 28 to 29)  
- Angle (See pages 32)  
You can also directly select these functions  
using their respective buttons on the remote  
control.  
3
Press the œ/ƒ buttons to  
select one of the six  
functions. Then press the  
or ENTER button to  
access the function.  
- INFO  
- ZOOM  
- EZ VIEW  
- REPEAT  
- BOOKMARK  
ENG-25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC FUNCTIONS  
Repeat Play  
Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc.  
When playing a DVD  
1
Press the REPEAT button  
on the remote control.  
Repeat screen appears.  
A DVD repeats play by chapter or title.  
DVD  
2
Chapter ( ): repeats the chapter that is  
playing.  
Press the ¦/buttons to  
select Chapter, Title or A-B,  
then press the ENTER  
button.  
ENTER REPEAT  
Off  
01  
01 A - B  
T
Title (  
T
): repeats the title that is playing.  
A-B: repeats a segment of the disc that you  
select.  
Using the A-B Repeat function  
1. Press the REPEAT button on the remote control.  
2. Press the ¦/button to select A-B button in the on screen display.  
3. Press the ENTER button at the point where you want repeat play to start (A).  
B is automatically highlighted.  
4. Press the ENTER button at the point where you want the repeat play to stop (B).  
- To return to normal play, press the CANCEL button.  
Note  
A-B REPEAT does not allow you to set point (B) until at least 5 seconds of playback time has  
elapsed after point (A) has been set.  
DVD  
3
To return to normal play,  
ENTER REPEAT  
Off  
01  
01 A - B  
T
press the REPEAT button  
again, then press the ¦/‹  
buttons to select Off and  
press the ENTER button.  
Note  
- Depending on the disc, the Repeat function may  
not work.  
ENG-26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC FUNCTIONS  
Slow Play  
This feature allows you slowly to repeat scenes containing sports, dancing, musical instruments  
being played etc., so you can study them more closely.  
When playing a DVD  
1
During play, press the  
PLAY/PAUSE ( ) button.  
+
/
-
2
Press the SEARCH (  
/
)
button to choose the play  
speed between 1/8, 1/4 and  
1/2 of normal speed during  
PAUSE or STEP mode.  
+
/
ENG-27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 4  
ADVANCED FUNCTIONS  
Adjusting the Aspect Ratio (EZ View)  
The Aspect ratio is the relation between the width and height of a picture. The two most common  
are 4:3 (Standard) and 16:9 (Widescreen). Follow the instructions below for the best aspect ratio  
setting for your TV.  
Changing the aspect ratio (DVD)  
Press the EZ VIEW  
button.  
- The screen size  
changes when the  
button is pressed  
repeatedly.  
- The screen zoom mode  
operates differently  
depending on the screen  
To make the aspect ratio bar disappear,  
setting in the Display  
EZ VIEW  
WIDE SCREEN  
press the CANCEL button.  
Setup menu.  
- To ensure correct  
operation of the EZ  
VIEW button, you should  
set the correct aspect  
ratio in the Display  
Setup menu.  
(See pages 52 to 54).  
If you are using a 16:9 TV  
For 16:9 aspect ratio discs  
For 4:3 aspect ratio discs  
- WIDE SCREEN  
Displays the content of the DVD title in 16:9 aspect ratio.  
- Normal Wide  
Displays the content of the DVD title in 16:9 aspect ratio.  
The picture will look horizontally stretched.  
- SCREEN FIT  
The top and bottom portions of the screen are cut off. When  
playing a 2.35:1 aspect ratio disc, the black bars at the top  
- SCREEN FIT  
The top and bottom portions of the screen are cut off and  
and bottom of the screen will disappear. The picture will  
the full screen appears.  
look vertically stretched. (Depending on a type of disc, the  
The picture will look vertically stretched.  
black bars may not disappear completely.)  
- ZOOM FIT  
- ZOOM FIT  
The top, bottom, left and right portions of the screen are cut  
The top, bottom, left and right of the screen are cut off and  
off and the central portion of the screen is enlarged.  
the central portion of the screen is enlarged.  
- Vertical Fit  
When a 4:3 DVD is viewed on a 16:9 TV, black bars will  
appear at the left and right of the screen in order to prevent  
the picture from looking horizontally stretched.  
ENG-28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
If you are using a 4:3 TV  
For 16:9 aspect ratio discs  
For 4:3 aspect ratio discs  
- 4:3 Letter Box  
- Normal Screen  
Displays the content of the DVD title in 4:3 aspect ratio.  
Displays the content of the DVD title in 16:9 aspect ratio.  
The black bars will appear at the top and bottom of the  
screen.  
- SCREEN FIT  
The top and bottom portions of the screen are cut off and  
the full screen appears.  
The picture will look vertically stretched.  
- 4:3 Pan&Scan  
The left and right portions of the screen are cut off and the  
central portion of the 16:9 screen is displayed.  
- ZOOM FIT  
- SCREEN FIT  
The top and bottom portions of the screen are cut off and a  
full screen appears.  
The top, bottom, left and right portions of the screen are cut  
off and the central portion of the screen is enlarged.  
The picture will look vertically stretched.  
- ZOOM FIT  
The top, bottom, left and right of the screen are cut off and  
the central portion of the screen is enlarged.  
Note  
This function may behave differently depending on the type of disc.  
ENG-29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
Selecting the Audio Language  
You can select a desired audio language available on a disc quickly and easily with the AUDIO  
button.  
Using the AUDIO button (DVD/MPEG4)  
1
Press the AUDIO button.  
The Audio changes when  
the button is pressed  
repeatedly.  
- The audio languages  
are represented by  
abbreviations.  
DVD  
AUDIO  
ENG DOLBY DIGITAL 5.1CH  
Press the AUDIO button  
MPEG4  
MPEG4 is a compressed video format  
designed to deliver DVD quality video at  
lower data rates and smaller file sizes.  
Types of MPEG4 files are DivX or Xdiv. These  
files have an .avi extension.  
on the remote control  
repeatedly to select the  
desired Audio (MP3,  
PCM, WMA, AC3 and  
MPEG) on MPEG4 discs  
then press the ENTER  
button .  
AUDIO  
PCM 1/2  
2
To remove the AUDIO  
icon, press the CANCEL  
or RETURN button.  
Note  
+
/
- This function depends on audio languages that  
are encoded on the disc. This function may not  
work with all DVDs.  
-
- A DVD disc can contain up to 8 audio  
languages.  
- To have the same audio language come up  
whenever you play a DVD; Refer to “Using the  
Audio Language” on page 47.  
ENG-30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
Selecting the Subtitle Language  
You can select a desired subtitle quickly and easily with the SUBTITLE button.  
Using the SUBTITLE button (DVD/MPEG4)  
1
Press the SUBTITLE  
button.  
The subtitle changes when  
the button is pressed  
repeatedly.  
The subtitle languages are  
represented by  
abbreviations.  
DVD  
SUBTITLE  
Off  
MPEG4  
An External subtitle  
option will appear,  
depending on the DivX  
Disc.  
Subtitle Selection  
External Subtitle Off  
readme.TXT  
Non-standard fonts are not supported  
Enter  
Return  
Menu  
Press the Subtitle button  
on the remote control  
repeatedly to select the  
desired subtitle  
MPEG4  
SUBTITLE  
Off  
language on an MPEG4  
disc.  
2
To remove the SUBTITLE  
icon, press the CANCEL  
or RETURN button.  
Note  
- Depending on the DVD, you may have to select  
the desired subtitle in the DVD’s Disc Menu.  
Press the DISC MENU button.  
- This function depends on what subtitles are  
encoded on the disc. This function may not work  
with all DVDs.  
+
/
-
- A DVD disc can contain up to 32 subtitle  
languages.  
- To have the same subtitle language come up  
whenever you play a DVD;  
Refer to “Using the Subtitle Language” on page  
48.  
ENG-31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
Changing the Camera Angle  
When a DVD contains multiple angles of a particular scene, you can use the ANGLE  
function.  
Using the ANGLE function (DVD)  
If the disc contains multiple angles, the ANGLE mark appears on the screen.  
1
-
During play, press the  
MENU button on the  
remote control.  
2
Info  
Press the œ/ƒ buttons to  
Zoom  
Bookmark  
select Function , then  
Repeat  
press the  
button.  
or ENTER  
EZ View  
Angle  
Return  
Enter  
Menu  
3
Info  
Press the œ/ƒ buttons to  
select Angle , then press  
the ‹¤or ENTER button.  
Zoom  
Bookmark  
Repeat  
EZ View  
Angle  
Return  
Enter  
Menu  
Note  
- If the disc has only one angle, this feature won’t  
work. Currently, very few discs have this feature.  
4
4/6  
Press the ¦/buttons or  
you can use the number  
buttons on the remote  
control to select the  
desired angle.  
ENG-32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
Using the Instant Replay/Skip Function  
Using the Instant Replay function (DVD)  
If you miss a scene, you can see it again using this function.  
Press the INSTANT  
REPLAY button.  
- The current scene  
moves backward about  
10 seconds, and plays  
back.  
+
/
Using the Instant Skip function (DVD)  
Use this function to skip playback about 10 seconds ahead of the current scene.  
Press the INSTANT SKIP  
button.  
- Playback will skip ahead  
10 seconds.  
Note  
+
/
Depending on the disc, these functions may not  
work.  
ENG-33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
Using the Bookmark Function  
This feature lets you bookmark sections of a DVD, so you can quickly find them at a later time.  
Using the Bookmark Function (DVD)  
1
-
During play, press the  
MENU button on the  
remote control.  
2
Info  
Press the œ/ƒ buttons to  
Zoom  
select Function, then  
Bookmark  
Repeat  
press the  
button.  
or ENTER  
EZ View  
Angle  
Return  
Enter  
Menu  
3
Info  
Press the œ/ƒ buttons to  
Zoom  
select Bookmark, then  
Bookmark  
Repeat  
EZ View  
Angle  
press the  
button.  
or ENTER  
Return  
Enter  
Menu  
4
When you reach the  
scene you want to mark,  
press the ENTER button.  
Up to three scenes may  
be marked at a time.  
Note  
CANCEL  
- Depending on the disc, the Bookmark function  
may not work.  
ENG-34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
Recalling a Marked Scene  
1~3  
-
The first 1~3 steps are the  
same as those for “Using  
the Bookmark Function”  
on page 34.  
CANCEL  
4
Press the ¦/buttons to  
select a marked scene.  
5
Press the PLAY/PAUSE  
(
) button to skip to  
the marked scene.  
+
/
-
Clearing a Bookmark  
1~3  
The first 1~3 steps are the  
same as those for “Using  
the Bookmark Function”  
on page 34.  
4
CANCEL  
Press the ¦/buttons to  
select the bookmark  
number you want to delete.  
5
Press the CANCEL button  
to delete a bookmark  
number.  
ENG-35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
Using the Zoom Function  
Using the Zoom Function (DVD)  
1
-
During play, press the  
MENU button on the  
remote control.  
2
Info  
Press the œ/ƒ buttons to  
select Function, then  
Zoom  
Bookmark  
Repeat  
EZ View  
Angle  
press the  
button.  
or ENTER  
Return  
Enter  
Menu  
3
Info  
Press the œ/ƒ buttons to  
Zoom  
select Zoom, then press  
Bookmark  
Repeat  
EZ View  
Angle  
the  
or ENTER  
button.  
Return  
Enter  
Menu  
During DVD play, press ENTER to zoom in the  
4
following order. 2X 4X 2X Normal.  
Press the œ/ƒ or ¦/‹  
buttons to select the part  
of the screen you want to  
zoom in on.  
Press the ENTER button.  
ENG-36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
Clips Menu for MP3/WMA/JPEG/MPEG4/CD Audio  
CD Audio or discs with MP3/WMA/JPEG/MPEG4 contain individual songs and/or pictures that will  
be organized into folders on this unit as shown below. They are similar to how you use your  
computer to put files into different folders.  
Open the disc tray.  
S t o p  
Off  
Place the disc on the tray.  
00:00:00  
Close the tray.  
The tray closes and this  
screen displays.  
Menu  
Enter  
Return  
-
-
-
-
: MP3 file icon.  
: WMA file icon.  
: JPEG file icon.  
-
-
-
: Name of currently playing file.  
: Current Playback Time.  
: Current Playback Mode : There are four  
modes. They can be selected in order by  
pressing the REPEAT button.  
:
AVI file icon.  
- Off: Normal Playback  
-
: CD Audio file icon.  
: Folder icon.  
- Track: Repeats the current track.  
- Folder: Repeats the current folder.  
- Random: Files in the disc will be played  
in random order.  
-
-
: Current Folder icon.  
Note  
• When playing MP3, WMA, or JPEG file, the Picture Quality and the HDMI Resolution (see page 53-54)  
cannot be set.  
• When playing MPEG4 file, the VIDEO SEL. only work in stop mode,  
Folder Selection  
The folder can be selected in Stop or Play mode.  
- To select the Parent Folder  
Press the RETURN button to go to the parent folder,  
Root  
or press the œ/ƒ buttons to select “..” and  
press ENTER to go to the parent folder.  
WMA  
JPEG  
- To select the Peer Folder  
Press the œ/ƒ buttons to select the desired folder,  
MP3  
Parent Folder  
then press ENTER.  
MUSIC  
Current Folder  
- To select the Sub-Folder  
Press the œ/ƒ buttons to select the desired folder,  
then press ENTER.  
1st  
Sub-Folders  
2nd  
SONG FILE 1  
SONG FILE 2  
Peer Folders  
SONG FILE 3  
MPEG4 FILES  
ENG-37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
MP3/WMA/CD Audio Playback  
S t o p  
Off  
1
00:00:00  
Open the disc tray.  
Place the disc on the tray.  
Close the tray.  
Menu  
Enter  
Return  
2
Press the œ/ƒ buttons to  
select a song file.  
Press ENTER to begin  
playback of the song file.  
P l a y  
O f f  
00:00:23  
B e c a u s e Yo u  
. . .  
T
B e c a u s e Yo u  
C a c t u s  
S a d D a y u  
Wo n d e r f u l  
REPEAT  
Enter  
Return  
Repeat  
Repeat/Random playback  
1
Press the REPEAT button  
to change the playback  
mode. There are four  
modes; Off, Track, Folder  
and Random.  
- Off: Normal Playback  
- Track: Repeats the current song file.  
- Folder: Repeats the song files which have the same extension  
in the current folder.  
- Random: Song files which have the same extension will be  
played in random order.  
To resume normal play, press the CANCEL button.  
ENG-38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
CD-R MP3/WMA file  
- Use a decompression transfer rate of at least 64Kbps  
when recording WMA files.  
When you record MP3 or WMA files on a CD-R for  
playback in this unit, please refer to the following.  
Sound quality with WMA files basically depends on the rate  
of compression/decompression you choose.  
Getting CD audio sound requires an analog/digital sampling  
rate, that is conversion to WMA format, of at least 64Kbps  
and up to 192Kbps.  
Conversely, files with decompression rates below 64Kbps  
or over 192Kbps will not be played properly.  
Sampling rate that can be supported for WMA files is >30  
Khz.  
- Do not try recording copyright protected MP3 files.  
Certain "secured" files are encrypted and code protected to  
prevent illegal copying. These files are of the following  
types: Windows MediaTM (registered trade mark of Microsoft  
Inc) and SDMITM (registered trade mark of The SDMI  
Foundation). You cannot copy such files.  
- Your MP3 or WMA files should be ISO 9660 or JOLIET  
format.  
ISO 9660 format and Joliet MP3 or WMA files are  
compatible with Microsoft's DOS and Windows, and with  
Apple's Mac. This format is the most widely used.  
- When naming your MP3 or WMA files, do not exceed 8  
characters, and enter “.mp3, .wma” as the file  
extension.  
General name format : Title.mp3. or Title.wma. When  
composing your title, make sure that you use 8 characters  
or less, have no spaces in the name, and avoid the use of  
special characters including: (.,/,\,=,+).  
- Use a decompression transfer rate of at least 128 Kbps  
when recording MP3 files.  
- Important:  
The above recommendations cannot be taken as a  
guarantee that the DVD player will play MP3 recordings, or  
as an assurance of sound quality. You should note that  
certain technologies and methods for MP3 file recording on  
CD-Rs prevent optimal playback of these files on your DVD  
player (degraded sound quality and in some cases, inability  
of the player to read the files).  
Sound quality with MP3 files basically depends on the rate  
of compression/decompression you choose. Getting CD  
audio sound requires an analog/digital sampling rate, that is  
conversion to MP3 format, of at least 128 Kbps and up to  
160 Kbps. However, choosing higher rates, like 192  
Kbps or more, only rarely give better sound quality.  
Conversely, files with decompression rates below 128 Kbps  
will not be played properly.  
- This unit can play a maximum of 500 files and 500 folders  
per disc.  
ENG-39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
MPEG4 Playback  
MPEG4 Play Function  
MPEG4 is a compressed video format designed to deliver DVD quality video at lower data rates  
and smaller file sizes. Types of MPEG4 files are DivX or Xdiv. These files have an .avi extension.  
AVI files are used to contain the audio and video data. Only AVI format files with the “.avi”  
extensions can be played.  
S t o p  
Off  
1
00:00:00  
Open the disc tray.  
Place the disc on the tray.  
Close the tray.  
Menu  
Enter  
Return  
2
Press the œ/ƒ or ¦/‹  
buttons to select an avi file  
(DivX/XiviD) and then  
press ENTER button.  
S t o p  
O f f  
00:00:00  
/ M P E G 4  
T
. . .  
a 0 1 _ d i v x 5 1 b - 8  
a 0 2 _ d i v x 5 0 5 b - 8  
a 0 3 _ d i v x 5 0 2 s p - 8  
a 0 4 _ d i v x 4 1 2 - 8  
Menu  
Enter  
Return  
Repeat and Repeat A-B Playback  
Press the REPEAT button to  
change playback mode.  
There are 3 modes  
Off, Folder, Title.  
- Folder : repeats the AVI files which have the same extension  
in the current folder.  
- Title : repeats the title that is playing.  
- Off : No Repeat mode.  
To return to normal play, press the REPEAT A-  
B button until display show Repeat:Off.  
Press the REPEAT A-B  
button to set the point where  
-
you want repeat play to start  
(A).  
Press the REPEAT A-B  
button again at the point  
where you want the repeat  
play to stop (B).  
Note  
A-B REPEAT does not allow you to set point (B)  
until at least 5 seconds of playback time has  
elapsed after point (A) has been set.  
ENG-40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
Possible warning messages that may appear when trying to  
play DivX/AVI files are :  
1. No Authorization  
MPEG4 Function Description  
Function  
Description  
Reference page  
-
During play, press the  
button, it moves forward  
or backward 5 minutes.  
or  
Skip  
or  
- File with bad registration code.  
(
(
)
)
AuthorizationError  
During play, press the SEARCH  
(
or  
) button and press  
Search  
or  
again to search at a faster  
speed. Allows you to search  
at a faster speed in an AVI  
file. (2X, 4X, 8X)  
-
Allows you to search at a  
slower speed in an AVI file.  
(1/8X, 1/4X, 1/2X)  
Enter  
Return  
Slow Motion  
Play  
P 21  
2. Unsupported Codec  
Each time the STEP button  
is pressed, a new frame will  
appear.  
Step Motion  
Play  
- Files with certain Codec Types, Versions (ex.  
MP4, AFS and other proprietary codecs) are not  
supported by this player.  
P 21  
P 36  
Will zoom in  
2X/4X/2X/Normal  
ZOOM  
S t o p  
O f f  
- Depending on the MPEG4 file, these functions may not work.  
00:00:00  
S w e e t V O L  
3
CD-R AVI file  
. . .  
B e c a u s e Yo u  
C a c t
This unit can play the following video compression formats  
within the AVI file format:  
S a d 
Wo n d e r f u l  
S w e e t V O L  
3
- DivX 3.11 contents  
Menu  
Enter  
Return  
- DivX 4 contents (Based on MPEG-4 Simple Profile)  
- DivX 5 contents (MPEG-4 simple profile plus additional  
features such as bi-directional frames. Qpel and GMC are  
also supported.)  
3. Unsupported Resolution  
- Files containing resolutions higher than the player’s  
specification are not supported.  
- XviD MPEG-4 compliant Contents.  
S t o p  
O f f  
DVD-RW & DVD+R  
00:00:00  
a 0 1 _ d i v x 6 1 b - 6  
T
Format that support for DivX file :  
. . .  
- Basic DivX format DivX3.11 / 4.12/ 5.x  
- Xvid (MPEG-4 compliant video codec) and DivX Pro  
- File format : *.avi, *.div, *.divx.  
a 0 1 _ d i v x 6 1 b - 6  
File you attempt to play  
a 0 2 _
has unsupported resolution.  
a 0 3 _
a 0 4 _ d i v x 6 1 2 - 6  
Menu  
Enter  
Return  
This unit supports all resolutions up to maximum below.  
DivX3.11 & DivX4 & XviD  
Bitrate may fluctuate:  
DivX5  
720 x 480 @30fps  
Device may skip decoding 720 x 576 @25fps  
the high bitrate portions  
and begin decoding again  
when Bitrate returns to  
normal.  
: Maximum bitrate : 4Mbps  
Note  
- The DVD-1080P7 can support resolutions up to 720 x 480 @30 frames/ 720 x 576 @25 frames.  
- This unit supports CD-R/RWs written in MPEG4 in accordance with the “ISO9660 format”.  
ENG-41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
Picture CD Playback  
S t o p  
Off  
1
00:00:00  
Select the desired folder.  
(See page 37)  
Menu  
Enter  
Return  
S t o p  
1
Off  
2
0 0 : 0 0 : 0 0  
Press the œ/ƒ buttons to  
select a Picture file in the  
clips menu and then press  
the ENTER button.  
. . .  
Menu  
Enter  
Return  
3
ENTER RETURN  
Note  
Press the INFO button to  
display the menu.  
Press the ¦/buttons to  
select the menu you want  
to view, then press the  
ENTER button.  
- Press the STOP button to return to the clips  
menu.  
- When playing a Kodak Picture CD, the unit  
displays the Photo directly, not the clips menu.  
Rotation  
: The pictures change automatically with about a 6  
second interval.  
:Each time the ENTER button is pressed, the  
picture rotates 90 degrees clockwise.  
: The pictures change automatically with  
about a 12 second interval.  
Zoom  
: The pictures change automatically with  
about a 18 second interval.  
: Press the œ/ƒ buttons to select the part of the screen  
you want to zoom in on.  
Press the ENTER button. Each time the ENTER  
button is pressed, the picture is enlarged up  
to 2X.  
ENTER RETURN  
TIMER:  
Slide Show  
: The unit enters slide show mode.  
• Before beginning the Slide Show, the picture interval must be  
set.  
Note  
- Depending on the file size, the amount of time between each picture may be different from the set interval  
time.  
- If you don’t press any button, the slide show will start automatically in about 10 seconds by default.  
ENG-42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED FUNCTIONS  
MP3-JPEG Playback  
You can play a JPEG photo file using music as a background.  
1
-
Press the œ/ƒ buttons to  
select an MP3 file in the  
clips menu and then  
press the ENTER button.  
Music will play from the beginning.  
2
Press the œ/ƒ buttons to  
select a JPEG file in the  
clips menu and then  
press the ENTER button.  
Note  
3
MP3 and JPEG files have to be on the same  
Press the STOP button  
when you want to stop  
the playback.  
disc.  
+
/
-
CD-R JPEG Discs  
- Only files with the “.jpg” and “.JPG” extensions can be played.  
- If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.  
- Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.  
- The name of the JPEG file may not be longer than 8 characters and should contain no blank spaces or special characters  
(. / = +).  
- Only a consecutively written multi-session disc can be played. If there is a blank segment in the multi-session disc, the disc can  
be played only up to the blank segment.  
- A maximum of 3000 images can be stored on a single CD.  
- Kodak Picture CDs are recommended.  
- When playing a Kodak Picture CD, only the JPEG files in the pictures folder can be played.  
- Kodak Picture CD: The JPEG files in the pictures folder can be played automatically.  
- Konica Picture CD: If you want to see the Picture, select the JPEG files in the clips menu.  
- Fuji Picture CD: If you want to see the Picture, select the JPEG files in the clips menu.  
- QSS Picture CD: The unit may not play QSS Picture CD.  
- If the number of files in 1 Disc is over 500, only the first 500 JPEG files can be played.  
- If the number of folders in 1 Disc is over 500, only the first JPEG files in 500 folders can be played.  
ENG-43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5  
NAVIGATING THE SETUP MENU  
Using the Setup Menu  
The Setup menu lets you customize your DVD player by allowing you to select various language  
preferences, set up a parental levels, and even adjust the player to the type of television screen you  
have.  
1
Language Setup  
Audio Setup  
With the unit in Stop  
mode, press the MENU  
button on the remote  
control.  
Display Setup  
Parental Setup :  
DivX(R)Registration :  
Anynet+ (HDMI-CEC) : On  
Setup  
Press the œ/ƒ buttons to  
select Setup, then press  
Enter  
Return  
Menu  
the  
or ENTER button.  
Language Setup : Setup of the Language.  
Audio Setup : Setup of the Audio Options.  
Display Setup :Setup of the Display Options. Use to select which type of screen you want to  
watch and several display options.  
Parental Setup : Setup of the Parental Level. Allows users to set the level necessary to prevent  
children from viewing unsuitable movies such as those with violence, adult  
subject matter, etc.  
Divx(R) Registration : Please use the Registration code to register this player with the DivX(R)  
Video On Demand format. To learn more go to www.divx.com/vod.  
Anynet+(HDMI-CEC) : Setup of the Anynet+(HDMI-CEC) Options.  
2
Press the œ/ƒ buttons to  
access the different  
features. Press the  
or  
ENTER button to access  
the sub features.  
3
To make the setup screen  
disappear after setting up,  
press the MENU button  
again.  
Note  
Depending on the disc, some Setup menu  
selections may not work.  
ENG-44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAVIGATING THE SETUP MENU  
Setting Up the Language Features  
If you set the player menu, disc menu, audio and subtitle language in advance, they will come up  
automatically every time you watch a movie.  
Using the Player Menu Language  
1
-
With the unit in Stop  
mode, press the MENU  
button.  
2
Language Setup  
Audio Setup  
Press the œ/ƒ buttons to  
Display Setup  
select Setup, then press  
the  
Parental Setup :  
DivX(R)Registration :  
Anynet+ (HDMI-CEC) : On  
or ENTER button.  
Setup  
Enter  
Return  
Menu  
3
Language Setup  
Audio Setup  
Press the œ/ƒ buttons to  
select Language Setup,  
then press the  
ENTER button.  
Display Setup  
or  
Parental Setup :  
DivX(R)Registration :  
Setup  
Anynet+ (HDMI-CEC) : On  
Enter  
Return  
Menu  
LANGUAGE SETUP  
4
Player Menu  
Disc Menu  
Audio  
:
:
:
:
:
English  
English  
English  
Automatic  
Unicode  
Press the œ/ƒ buttons to  
select Player Menu, then  
press the  
button.  
Subtitle  
or ENTER  
DivX Subtitle  
Setup  
Enter  
Return  
Menu  
- The language is selected and the screen  
returns to the Language Setup menu.  
LANGUAGE SETUP  
5
P
l
a
y
e
r
M
e
n
u
English  
Press the œ/ƒ buttons to  
select the desired  
- To make the setup menu disappear, press the  
MENU button.  
Disc Menu  
Audio  
Français  
Deutsch  
Español  
Italiano  
language, then press the  
Subtitle  
DivX Subtitle  
Nederlands  
or ENTER button.  
Setup  
Return  
Menu  
Enter  
ENG-45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAVIGATING THE SETUP MENU  
Using the Disc Menu Language  
This function changes the text language only on the disc menu screens.  
-
1
With the unit in Stop  
mode, press the MENU  
button.  
2
Language Setup  
Audio Setup  
Press the œ/ƒ buttons to  
Display Setup  
select Setup, then press  
the  
Parental Setup :  
DivX(R)Registration :  
Anynet+ (HDMI-CEC) : On  
or ENTER button.  
Setup  
Enter  
Return  
Menu  
3
Language Setup  
Audio Setup  
Press the œ/ƒ buttons to  
select Language Setup,  
then press the  
ENTER button.  
Display Setup  
Parental Setup :  
DivX(R)Registration :  
or  
Setup  
Anynet+ (HDMI-CEC) : On  
Enter  
Return  
Menu  
LANGUAGE SETUP  
4
Player Menu  
Disc Menu  
Audio  
:
:
:
:
:
English  
English  
English  
Automatic  
Unicode  
Press the œ/ƒ buttons  
to select Disc Menu, then  
press the  
button.  
Subtitle  
or ENTER  
DivX Subtitle  
Setup  
Enter  
Return  
Menu  
- If the selected language is not recorded on  
the disc, the original pre-recorded language is  
selected.  
LANGUAGE SETUP  
5
Player Menu  
Press the œ/ƒ buttons to  
select the desired  
English  
Français  
Deutsch  
Español  
Italiano  
Disc Menu  
- The language is selected and the screen  
returns to the Language Setup menu.  
Audio  
language, then press the  
Subtitle  
or ENTER button.  
Nederlands  
DivX Subtitle  
- To make the setup menu disappear, press the  
MENU button.  
Setup  
Enter  
Return  
Menu  
ENG-46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAVIGATING THE SETUP MENU  
Using the Audio Language  
-
1
With the unit in Stop  
mode, press the MENU  
button.  
2
Language Setup  
Audio Setup  
Press the œ/ƒ buttons to  
Display Setup  
select Setup, then press  
the  
Parental Setup :  
or ENTER button.  
DivX(R)Registration :  
Setup Anynet+ (HDMI-CEC) : On  
Enter  
Return  
Menu  
3
Language Setup  
Audio Setup  
Press the œ/ƒ buttons to  
select Language Setup,  
then press the  
ENTER button.  
Display Setup  
or  
Parental Setup :  
DivX(R)Registration :  
Setup  
Setup  
Setup  
Anynet+ (HDMI-CEC) : On  
Enter  
Return  
Menu  
LANGUAGE SETUP  
4
Player Menu  
Disc Menu  
Audio  
:
:
:
:
:
English  
English  
English  
Automatic  
Unicode  
Press the œ/ƒ buttons to  
select Audio, then press  
the  
Subtitle  
or ENTER button.  
DivX Subtitle  
Enter  
Return  
Menu  
- Select “Original” if you want the default  
soundtrack language to be the original  
language the disc is recorded in.  
LANGUAGE SETUP  
5
Player Menu  
Disc Menu  
Press the œ/ƒ buttons to  
select the desired  
Original  
English  
Français  
- If the selected language is not recorded on  
the disc, the original pre-recorded language is  
selected.  
Audio  
Deutsch  
language, then press the  
Español  
Italiano  
Subtitle  
or ENTER button.  
DivX Subtitle  
- The language is selected and the screen  
returns to the Language Setup menu.  
Enter  
Return  
Menu  
- To make the setup menu disappear, press the  
MENU button.  
ENG-47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAVIGATING THE SETUP MENU  
Using the Subtitle Language  
1
-
With the unit in Stop  
mode, press the MENU  
button.  
2
Language Setup  
Audio Setup  
Press the œ/ƒ buttons to  
Display Setup  
select Setup, then press  
the  
Parental Setup :  
DivX(R)Registration :  
Anynet+ (HDMI-CEC) : On  
or ENTER button.  
Setup  
Enter  
Return  
Menu  
3
Language Setup  
Audio Setup  
Press the œ/ƒ buttons to  
select Language Setup,  
then press the  
ENTER button.  
Display Setup  
or  
Parental Setup :  
DivX(R)Registration :  
Setup  
Anynet+ (HDMI-CEC) : On  
Enter  
Return  
Menu  
LANGUAGE SETUP  
4
Player Menu  
Disc Menu  
Audio  
:
:
:
:
:
English  
English  
English  
Automatic  
Unicode  
Press the œ/ƒ buttons to  
select Subtitle, then press  
the  
Subtitle  
or ENTER button.  
DivX Subtitle  
Setup  
Enter  
Return  
Menu  
- Select “Automatic” if you want the subtitle  
language to be the same as the language  
selected as the audio language.  
LANGUAGE SETUP  
5
Player Menu  
Disc Menu  
Audio  
Press the œ/ƒ buttons to  
select the desired  
Automatic  
English  
Français  
Deutsch  
- Some discs may not contain the language you  
select ; in that case the disc will use its  
original language setting.  
language, then press the  
S
u
b
t
i
t
l
e
Es ñol  
pa  
Italiano  
or ENTER button.  
DivX Subtitle  
Setup  
- The language is selected and the screen  
returns to the setup menu.  
Return  
Menu  
Enter  
- To make the setup menu disappear, press the  
MENU button.  
ENG-48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAVIGATING THE SETUP MENU  
Using the DivX Subtitle Language  
1
-
With the unit in Stop  
mode, press the MENU  
button.  
2
Language Setup  
Audio Setup  
Press the œ/ƒ buttons to  
Display Setup  
select Setup, then press  
the  
Parental Setup :  
DivX(R)Registration :  
Anynet+ (HDMI-CEC) : On  
or ENTER button.  
Setup  
Enter  
Return  
Menu  
3
Language Setup  
Audio Setup  
Press the œ/ƒ buttons to  
select Language Setup,  
then press the  
ENTER button.  
Display Setup  
or  
Parental Setup :  
DivX(R)Registration :  
Setup  
Anynet+ (HDMI-CEC) : On  
Enter  
Return  
Menu  
LANGUAGE SETUP  
4
Player Menu  
Disc Menu  
Audio  
:
:
:
:
:
English  
English  
English  
Automatic  
Unicode  
Press the œ/ƒ buttons to  
select DivX Subtitle, then  
press the  
button.  
Subtitle  
or ENTER  
DivX Subtitle  
Setup  
Enter  
Return  
Menu  
- The language is selected and the screen  
returns to the setup menu.  
LANGUAGE SETUP  
5
Player Menu  
Disc Menu  
Audio  
:
:
English  
English  
Press the œ/ƒ buttons to  
select the desired  
- To make the setup menu disappear, press the  
MENU button.  
Unicode  
Cyrillic  
Greek  
language, then press the  
Subtitle  
DivX Subtitle  
or ENTER button.  
Setup  
Enter  
Return  
Menu  
ENG-49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAVIGATING THE SETUP MENU  
Setting Up the Audio Options  
Audio Options allow you to setup the audio device and sound status settings  
depending on the audio system in use.  
1
-
With the unit in Stop  
mode, press the MENU  
button.  
2
Language Setup  
Audio Setup  
Press the œ/ƒ buttons to  
Display Setup  
select Setup, then press  
the  
Parental Setup :  
DivX(R)Registration :  
Anynet+ (HDMI-CEC) : On  
or ENTER button.  
Setup  
Enter  
Return  
Menu  
3
Language Setup  
Audio Setup  
Press the œ/ƒ buttons to  
select Audio Setup, then  
press the  
button.  
Display Setup  
Parental Setup :  
DivX(R)Registration :  
or ENTER  
Setup  
Anynet+ (HDMI-CEC) : On  
Enter  
Return  
Menu  
To make the setup menu disappear, press the  
MENU button.  
AUDIO SETUP  
4
Digital Out  
:
:
:
PCM  
On  
Press the œ/ƒ buttons to  
Dynamic Compression  
PCM Down Sampling  
select the desired item,  
On  
then press the  
or  
ENTER button.  
Setup  
Enter  
Return  
Menu  
ENG-50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAVIGATING THE SETUP MENU  
The following describes each option found in the Audio Setup Menu.  
Digital Out  
- PCM : Converts to PCM(2CH) audio.  
- Bitstream : Outputs Dolby Digital via digital output.  
Select Bitstream when connecting to a Dolby Digital Decoder.  
Dynamic Compression  
- On : To select dynamic compression. This is useful for watching movies late at night, as it  
balances the loud and quiet portions of a disc.  
- Off : To select the standard range.  
PCM Down Sampling  
- On : Select this when the Amplifier connected to the player is not 96KHz compatible.  
In this case, the 96KHz signals will be down converted to 48KHZ.  
- Off : Select this when the Amplifier connected to the player is 96KHz compatible. In this case,  
all signals will be output without any changes.  
Note  
Even when PCM Down sampling is Off, some discs will only output down-sampled audio through  
the digital outputs.  
HDMI  
- If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS,  
MPEG), you should set Digital Audio to PCM.  
- If your TV is not compatible with LPCM sampling rates over 48kHz, you should set PCM  
Down sampling to On.  
Note  
To make the Setup menu disappear, press the MENU button.  
• There is no analog audio output when you play a DTS disc.  
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are  
trademarks of Dolby Laboratories.  
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.  
ENG-51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAVIGATING THE SETUP MENU  
Setting Up the Display Options  
Display options enable you to set various video functions of the player.  
-
1
With the unit in Stop  
mode, press the MENU  
button.  
2
Language Setup  
Audio Setup  
Press the œ/ƒ buttons to  
Display Setup  
select Setup, then press  
the  
Parental Setup :  
DivX(R)Registration :  
Anynet+ (HDMI-CEC) : On  
or ENTER button.  
Setup  
Enter  
Return  
Menu  
3
Language Setup  
Audio Setup  
Press the œ/ƒ buttons to  
select Display Setup,  
then press the  
ENTER button.  
Display Setup  
Parental Setup :  
DivX(R)Registration :  
or  
Setup  
Anynet+ (HDMI-CEC) : On  
Enter  
Return  
Menu  
To make the setup menu disappear, press the  
MENU button.  
DISPLAY SETUP  
4
TV Aspect  
Still Mode  
: Wide  
: Auto  
Press the œ/ƒ buttons to  
Screen Messages : On  
select the desired item,  
then press the  
ENTER button.  
Video Output  
HDMI  
: S-Video  
or  
Picture Quality  
Setup  
Enter  
Return  
Menu  
ENG-52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAVIGATING THE SETUP MENU  
• If the Yes/No selection in the Display Setup  
sub Menu is not made within 10 seconds,  
the screen returns to the previous menu.  
The following describes each option found in the  
Display Setup Menu.  
TV Aspect  
Depending on a type of television you have,  
you may want to adjust the screen setting  
(aspect ratio).  
HDMI  
This setting is used when the unit is  
connected by HDMI to Display devices (TV,  
Projector, etc.).  
- 4:3 Letter Box : Select when you want to  
see the total 16:9 ratio screen DVD  
- Resolution Setting  
supplies, even though you have a TV with a  
4:3 ratio screen. Black bars will appear at  
the top and bottom of the screen.  
The resolution setting is dependent on the  
capability of your TV or Monitor.  
- Auto : Auto resolution setting  
- Manual : Manual resolution setting  
- Resolutions  
- 4:3 Pan&Scan : Select this for conventional  
size TVs when you want to see the central  
portion of the 16:9 screen. (Extreme left and  
right side of movie picture will be cut off.)  
480p : 720 x 480  
720p : 1280 x 720  
1080i : 1920 x 1080  
1080p : 1920 x 1080  
- 16:9 Wide : You can view the full 16:9  
picture on your wide screen TV.  
DISPLAY SETUP  
TV Aspect  
4:3 Letter Box  
For the best video performance, check your  
TV’s user manual for proper resolution  
setting.  
Still Mode  
4:3 Pan&Scan  
Screen Messag  
Video Output  
HDMI  
16:9 Wide  
Picture Quality  
Setup  
HDMI SETUP  
Enter  
Return  
Menu  
Resolution Setting : Manual  
Resolution  
: 720p  
Still Mode  
These options will help prevent picture shake  
in still mode and display small text clearer.  
Setup  
Enter  
Return  
Menu  
- Auto : When selecting Auto, Field/Frame  
mode will be automatically ajusted.  
- Field : Select this feature to minimize  
screen shaking.  
- Frame : Select this feature when you want  
to read text more clearly on the screen .  
Screen Messages  
Use to turn on-screen messages On or Off.  
Video Output  
Select Video Output.  
- S-Video : Select when you want to use  
Video and S-Video Out.  
- I-SCAN : Select when you want to use  
Video and Component 480i(Interlace) Out.  
- P-SCAN : Select when you want to use  
Component 480p(Progressive) Out or  
HDMI.  
• If you press the VIDEO SEL. button with  
no disc inserted, the Video output mode is  
changed in the following order:  
(COMPOSITE/S-Video I-SCAN P-SCAN)  
ENG-53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAVIGATING THE SETUP MENU  
Picture Quality  
- Black Level : Adjusts the brightness of the  
screen.(On or Off) It does not function in  
Progressive mode.  
- Brightness : Level 1 ~ Level 5  
- Contrast : Level 1 ~ Level 5  
- Color Saturation : Level 1 ~ Level 5  
PICTURE QUALITY  
Black Level  
Brightness  
Contrast  
: On  
: Level 3  
: Level 3  
: Level 3  
Color Saturation  
Setup  
Enter  
Return  
Menu  
• Consult your TV User’s Manual to find  
out if your TV supports Progressive Scan.  
If Progressive Scan is supported, follow  
the TV User’s Manual regarding  
Progressive Scan settings in the TV’s  
menu system.  
• If Video Output is set incorrectly, the  
screen may be blocked.  
• The resolutions available for HDMI output  
depend on the connected TV or projector.  
For details, see the user’s manual of your  
TV or projector.  
• When the resolution is changed during  
playback, it may take a few seconds for a  
normal image to appear.  
• If you have HDMI connected, better  
picture quality will be provided when the  
output resolution is set to 720p, 1080i  
or1080p.  
ENG-54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAVIGATING THE SETUP MENU  
Setting Up the Parental Control  
The Parental Control function works in conjunction with DVDs that have been assigned a rating,  
which helps you control the types of DVDs that your family watches. There are up to 8 rating levels  
on a disc.  
Setting Up the Rating Level  
1
-
With the unit in Stop  
mode, press the MENU  
button.  
2
Language Setup  
Audio Setup  
Press the œ/ƒ buttons to  
Display Setup  
select Setup, then press  
the  
Parental Setup :  
DivX(R)Registration :  
Anynet+ (HDMI-CEC) : On  
or ENTER button.  
Setup  
Enter  
Return  
Menu  
3
Language Setup  
Audio Setup  
Press the œ/ƒ buttons to  
select Parental Setup,  
then press the  
ENTER button.  
Display Setup  
Parental Setup :  
DivX(R)Registration :  
or  
Anynet+ (HDMI-CEC) : On  
Setup  
Enter  
Return  
Menu  
PARENTAL SETUP  
: Kids Safe  
4
Rating Level  
Press the œ/ƒ buttons to  
Change Password  
select Rating Level, then  
press the  
button.  
or ENTER  
Setup  
Enter  
Return  
Menu  
PARENTAL SETUP  
: Kids Safe  
5
Rating Level  
Enter your password.  
By default, password is  
set to 0000.  
Change Password  
Enter Password  
Setup  
Enter  
Return  
Menu  
To make the setup menu disappear, press the  
MENU button.  
PARENTAL SETUP  
6
Rating Level  
R
Kids Safe  
Press the œ/ƒ buttons to  
select the Rating Level  
you want, then press the  
For example, if you select the Kids Safe level,  
discs that contain level 2 or higher will not play.  
Change Passwor  
Level 2  
Level 3  
Level 4  
Level 5  
Level 6  
or ENTER button.  
Setup  
e.g) Setting up in Kids  
Enter  
Return  
Menu  
Safe.  
ENG-55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAVIGATING THE SETUP MENU  
Changing the Password  
1
-
With the unit in Stop  
mode, press the MENU  
button.  
2
Language Setup  
Audio Setup  
Press the œ/ƒ buttons to  
Display Setup  
select Setup, then press  
the  
Parental Setup :  
or ENTER button.  
DivX(R)Registration :  
Anynet+ (HDMI-CEC) : On  
Setup  
Enter  
Return  
Menu  
3
Language Setup  
Audio Setup  
Press the œ/ƒ buttons to  
Display Setup  
select Parental Setup,  
then press the  
ENTER button.  
Parental Setup :  
DivX(R)Registration :  
or  
Setup  
Anynet+ (HDMI-CEC) : On  
Enter  
Return  
Menu  
To make the setup menu disappear, press the  
MENU button.  
PARENTAL SETUP  
: Kids Safe  
4
Rating Level  
Press the œ/ƒ button to  
select Change  
Change Password  
Password, then press the  
or ENTER button.  
Setup  
Enter your new password.  
Re-enter the new  
Enter  
Return  
Menu  
password again.  
PARENTAL SETUP  
: Kids Safe  
Rating Level  
Change Password  
Enter Password  
Setup  
Enter  
Return  
Menu  
PARENTAL SETUP  
: Kids Safe  
Rating Level  
Change Password  
Enter New Password  
Setup  
Note  
Enter  
Return  
Menu  
If you have forgotten your password, see  
“Forgot Password” in the Troubleshooting Guide.  
ENG-56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAVIGATING THE SETUP MENU  
Setting Up the Anynet+(HDMI-CEC)  
Anynet+ is a function that can be used to operate this DVD Player using a Samsung TV  
remote control. This is done by connecting the DVD player to a SAMSUNG TV using an HDMI  
Cable. (see page 12-13) This is only available with SAMSUNG TVs that support Anynet+.  
To operate Anynet+, you must turn Anynet+(HDMI-CEC) On in the Setup Menu.  
1
-
With the unit in Stop  
mode, press the MENU  
button.  
2
Language Setup  
Audio Setup  
Press the œ/ƒ buttons to  
Display Setup  
select Setup, then press  
the  
Parental Setup :  
DivX(R)Registration :  
Anynet+ (HDMI-CEC) : On  
or ENTER button.  
Setup  
Enter  
Return  
Menu  
3
Language Setup  
Audio Setup  
Press the œ/ƒ buttons to  
select Anynet+(HDMI-  
CEC), then press the  
or ENTER button.  
Display Setup  
Parental Setup :  
DivX(R)Registration :  
Setup  
Anynet+ (HDMI-CEC) : On  
Enter  
Return  
Menu  
To make the setup menu disappear, press the  
MENU button.  
4
Language Setup  
Audio Setup  
Set the Anynet+(HDMI-  
Display Setup  
CEC) to “On”on your DVD  
Player., then press the  
or ENTER button.  
Parental Setup :  
DivX(R)Registration :  
Off  
Anynet+ (HDMI-
Setup  
On  
Enter  
Return  
Menu  
5
DVDP  
View TV  
®
®
®
®
Set the Anynet+ function on  
your Samsung TV. (See your  
TV instruction manual for  
more information.).  
Select Device  
Record  
Menu on Device  
Device Operation  
®
®
®
Receiver  
Setup  
:
Off  
ENTER  
Move  
Exit  
• When you press Anynet+  
button on the TV remote  
control, the OSD to the right  
will appear.  
TV Menu  
ENG-57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAVIGATING THE SETUP MENU  
You can operate the DVD Player by using the TV remote control. These are buttons that can  
be used to operate the DVD Player:  
,
,
,
,
,
,
and  
buttons,  
buttons.  
- Select Device : Use this option to select device which you want to connect to your TV.  
- Menu on Device : Same as MENU button on the DVD Player remote control.  
- Device Operation : Same as INFO button on the DVD Player remote control.  
Note  
• While watching TV, your TV screen will change to the play screen when you press the  
PLAY button of the DVD player.  
• If you play a DVD when the TV power is off, the TV will power On.  
• If you turn the TV off, the DVD Player will power off automatically.  
• If you change from HDMI to other sources (Composite,Component,... etc) while playing a  
DVD disc, the DVD Player will stop playing.  
ENG-58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6  
REFERENCE  
2. Press the ¦/buttons to select Total, then  
Firmware upgrade  
press the ENTER button.  
Introduction  
Upgrading the Firmware will keep your DVD player  
up to date.  
The latest firmware version for this unit is provided  
on the Samsung Website.(www.samsung.com).  
Firmware upgrade starts  
How to make an upgrade disc  
You must burn the latest firmware version onto a  
blank CD-R or CD-RW disc:  
- During the firmware upgrade process, the  
tray will open.  
Please remove the disc and wait for about  
1. You have to download a new file through  
Download Center of Samsung Internet Site  
(www.samsung.com).  
2 minutes.  
- If the DVD player was successfully updated,  
the disc tray will close and the unit will turn  
off and on.  
When the unit turns on, the Select Menu  
Language screen will appear.  
2. Write the file to Disc using the CD-RW drive of  
your computer.  
Note  
3. Press the number buttons to select the desired  
language.  
The CD should be burned following specs  
below.  
- File System CD-ROM ISO Level.  
- Character set ISO 9660.  
- The burned CD has to be Finalized.  
- Please burn the CD at a low speed.  
Press  
Touche  
1
2
3
4
5
6
for English  
pour Français  
für Deutsch  
Drücken Sie  
Pulsar  
para Español  
per Italiano  
Premere  
Druk op  
voor Nederlands  
Upgrade procedure  
1. Open the disc tray of your DVD1080P7.  
Place the burned disc on the tray. Close the tray.  
The Firmware upgrade screen will appear.  
Note  
- If the “Select Menu Language” doesn’t  
appear, please contact Samsung  
Customer Service. (see page 63)  
- Do not press any button or unplug the  
power cord during the upgrade.  
- The upgrade procedure may change, refer  
to the web site (www.samsung.com).  
Firmware upgrade  
menu appears  
ENG-59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REFERENCE  
Troubleshooting  
Before requesting service, please check the following.  
Action  
Problem  
Page  
• Check the batteries in the remote control.  
No operations can be  
performed with the  
remote control.  
They may need replacing.  
• Operate the remote control at a distance of no more than 20 feet.  
• Remove batteries and hold down one or more buttons for several minutes to  
drain the microprocessor inside the remote control to reset it. Reinstall  
batteries and try to operate the remote control again.  
P5  
P8  
Disc does not play.  
• Ensure that the disc is installed with the label side facing up.  
• Check the region number of the DVD.  
• 5.1 channel sound is reproduced only when the following conditions are met :  
1) The DVD player is connected with the proper Amplifier  
2) The disc is recorded with 5.1 channel sound.  
5.1 channel sound is  
not being reproduced.  
P19  
• Check whether the disc being played has the “5.1 ch” mark on the outside.  
• Check if your audio system is connected and working properly.  
• In a SETUP Menu, is the Audio Output set to Bitstream?  
P50~51  
• The features or action cannot be completed at this time because:  
1. The DVD’s software restricts it.  
2. The DVD’s software doesn’t support the feature (e.g., angles).  
3. The feature is not available at the moment.  
4. You’ve requested a title or chapter number or search time that is out of range.  
The  
icon appears  
on screen.  
Disc Menu doesn’t appear.  
• Check if the disc has a Menu.  
Play mode differs from  
the Setup Menu  
selection.  
• Some of the functions selected in the Setup Menu may not work properly if the  
disc is not encoded with the corresponding function.  
P44~58  
The screen ratio  
• The Screen Ratio is fixed on your DVDs.  
P52~54  
P50~51  
cannot be changed.  
• Make sure you have selected the correct Digital Output in the Audio Options  
Menu.  
No audio.  
The screen is blocked  
• Press the  
button (on the front panel) for more than 5 seconds with no disc  
P20  
P55  
inside. All settings will revert to the factory settings.  
• Press the  
button (on the panel) for more than 5 seconds with no disc  
Forgot password  
inside. All settings including the password will revert to the factory settings.  
Don't use this unless absolutely necessary.  
If you experience other  
problems.  
• Go to the contents and find the section of the instruction book that contains  
the explanations regarding the current problem, and follow the procedure once  
again.  
• If the problem still cannot be solved, please contact your nearest Samsung  
authorized service center.  
• Make sure that the disc is not dirty or scratched.  
The picture is noisy or  
distorted  
P4  
Clean the disc.  
ENG-60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REFERENCE  
Action  
Problem  
Page  
P12~13  
P12~13  
No HDMI output.  
• Check the if the Video output is set to HDMI.  
• Check the connection between the TV and the HDMI jack of DVD player.  
• See if the TV supports this 480p/720p/1080i/1080p DVD player.  
• If snow noise appears on the screen, it means that TV does not support  
HDCP (High-bandwidth Digital Content Protection).  
Abnormal HDMI output  
screen.  
HDMI output Jitter  
• Check if your TV is setup correctly.  
• Screen Jitter may occur when frame rate is converted from 50Hz to 60Hz for  
720P/1080i/1080p HDMI (High Definition Multimedia Interface) Output.  
• Please refer to the user’s manual of your TV.  
P52~54  
ENG-61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REFERENCE  
Specifications  
Power Requirements  
Power Consumption  
Weight  
AC 120V ~ 60 Hz  
9 W  
1.042 lbs 0.065 oz  
17.2” (W) X 18” (D) X 1.8” (H)  
+41°F to +95°F  
10 % to 75 %  
General  
Dimensions  
Operating Temperature Range  
Operating Humidity Range  
Reading Speed : 3.49 ~ 4.06 m/sec.  
Approx. Play Time  
(Single Sided, Single Layer Disc) : 135 min.  
DVD  
(DIGITAL VERSATILE DISC)  
CD : 5”  
(COMPACT DISC)  
Reading Speed : 4.8 ~ 5.6 m/sec.  
Maximum Play Time : 74 min.  
Disc  
Reading Speed : 4.8 ~ 5.6 m/sec.  
Maximum Play Time : 20 min.  
CD : 3 1/2”  
(COMPACT DISC)  
1 channel : 1.0 Vp-p (75 Ω load)  
Composite Video  
Component Video  
Y : 1.0 Vp-p (75 Ω load)  
Pr : 0.70 Vp-p (75 Ω load)  
Pb : 0.70 Vp-p (75 Ω load)  
Video  
Output  
Luminance Signal : 1.0 Vp-p (75 Ω load)  
Chrominance Signal : 0.3 Vp-p (75 Ω load)  
480p, 720p, 1080i,1080p  
S-Video  
HDMI  
2 Channel  
L(1/L), R(2/R)  
48 kHz Sampling : 4 Hz to 22 kHz  
96 kHz Sampling : 4 Hz to 44 kHz  
*Frequency Response  
Audio  
*S/N Ratio  
110 dB  
100 dB  
0.004 %  
Output  
*Dynamic Range  
*Total Harmonic Distortion  
*: Nominal specification  
- Samsung Electronics Co., Ltd reserves the right to change the specifications with  
out notice.  
- Weight and dimensions are approximate.  
ENG-62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contact SAMSUNG WORLD WIDE  
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG  
customer care center.  
Region  
Country  
Customer Care Center  
1-800-SAMSUNG (7267864)  
01-800-SAMSUNG (7267864)  
1-800-SAMSUNG (7267864)  
0800-333-3733  
Web Site  
CANADA  
North America  
MEXICO  
U.S.A  
ARGENTINE  
0800-124-421  
BRAZIL  
4004-0000  
CHILE  
800-726-7864 (SAMSUNG)  
0-800-507-7267  
COSTA RICA  
ECUADOR  
EL SALVADOR  
GUATEMALA  
JAMAICA  
PANAMA  
PUERTO RICO  
1-800-10-7267  
800-6225  
1-800-299-0013  
Latin America  
1-800-234-7267  
800-7267  
1-800-682-3180  
REP. DOMINICA  
1-800-751-2676  
TRINIDAD & TOBAGO  
1-800-7267-864  
VENEZUELA  
0-800-100-5303  
COLOMBIA  
BELGIUM  
01-8000112112  
02 201 2418  
844 000 844  
Distributor pro Českou republiku :  
Samsung Zrt., česka organizační složka  
Vyskočilova 4, 14000 Praha 4  
38 322 887  
CZECH REPUBLIC  
DENMARK  
FINLAND  
www.samsung.com/fi  
09 693 79 554  
3260 SAMSUNG or  
08 25 08 65 65 (€ 0,15/Min)  
01805 - 121213 (€ 0,14/Min)  
06-80-SAMSUNG (7267864)  
800-SAMSUNG (7267864)  
0032 (0)2 201 24 18  
0900 20 200 88 (€ 0,10/Min)  
231 627 22  
FRANCE  
GERMANY  
HUNGARY  
ITALIA  
Europe  
LUXEMBURG  
NETHERLANDS  
NORWAY  
POLAND  
0 801 801 881  
PORTUGAL  
SLOVAKIA  
SPAIN  
80 8 200 128  
0800-SAMSUNG (726786)  
902 10 11 30  
SWEDEN  
U.K  
Republic of Ireland  
Switzerland  
RUSSIA  
KAZAHSTAN  
UZBEKISTAN  
UKRAINE  
LITHUANIA  
LATVIA  
ESTONIA  
08 585 367 87  
0870 SAMSUNG (7267864)  
0818 717 100  
0800-7267864  
8-800-200-0400  
8-800-080-1188  
8-800-120-0400  
CIS  
8-800-502-0000  
8-800-77777  
800-7267  
800-7267  
AUSTRALIA  
CHINA  
HONG KONG  
1300 362 603  
800-810-5858, 010-6475 1880  
3698 - 4698  
3030 8282  
INDIA  
1800 110011  
INDONESIA  
JAPAN  
MALAYSIA  
PHILIPPINES  
SINGAPORE  
0800-112-8888  
0120-327-527  
Asia Pacific  
1800-88-9999  
1800-10-SAMSUNG (7267864)  
1800-SAMSUNG (7267864)  
1800-29-3232  
THAILAND  
02-689-3232  
TAIWAN  
VIETNAM  
0800-329-999  
1 800 588 889  
SOUTH AFRICA  
0860 7267864 (SAMSUNG)  
800SAMSUNG (7267864)  
8000-4726  
Middle East & Africa  
U.A.E  
ENG-63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warranty  
LIMITED WARRANTY TO ORIGINAL PURCHASER  
This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC. (SAM-  
SUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against  
manufacturing defects in materials and workmanship for the following limited warranty period:  
One (1) Year Parts / Ninety days (90) Labor  
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the  
United States, and does not include transportation, installation, removal or reinstallation. Warranty repairs must be  
performed by SAMSUNG’s authorized service center. To receive warranty service, the original dated bill of sale must be  
presented upon request as proof of purchase to SAMSUNG or SAMSUNG’s authorized service center. Transportation  
to and from the service center is the responsibility of the purchaser.  
SAMSUNG will repair or replace this product, at our option and at no charge with new or reconditioned parts, if found  
to be defective during the limited warranty period specified above. The product must be returned during the warranty  
period with transportation charges prepaid to SAMSUNG’s designated service center. Prior to returning any product for  
warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. SAM-  
SUNG does not warrant uninterrupted or error-free operation of the product. All replaced parts and products become  
the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the  
remaining original warranty, or ninety (90) days, whichever is longer.  
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, noncom-  
mercial use of this product and shall not apply to the following, including, but not limited to: damage which occurs in  
shipment; applications and uses for which this product was not intended; failures or problems which are caused by  
products or equipment not supplied by SAMSUNG; accidents, misuse, abuse, neglect, misapplication, fire, water, light-  
ning or other acts of nature; incorrect electrical line voltage, fluctuations or surges; damage caused by improper or  
faulty installation; improper connection with any peripheral; product alteration or modification; improper or unautho-  
rized repair; cosmetic damage or exterior finish; product with altered serial numbers; failure to follow operating  
instructions, customer adjustments, maintenance and environmental instructions that are covered and prescribed in  
the instruction book; use of non-SAMSUNG or unauthorized parts, supplies, accessories or equipment which damage  
this product or result in service problems; failures or problems due to incompatibility with other equipment.  
ENG-64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contact SAMSUNG WORLDWIDE  
If you have any questions or comments relating to Samsung products,  
please contact the SAMSUNG customer care center.  
Samsung Electronics America,Inc.  
105 Challenger Road  
Ridgefield Park,NJ 07660-0511  
1-800-SAMSUNG (7267864)  
AK68-01341A(01)  
US  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radio Shack Motorized Toy Car 60 2765 User Guide
Radio Shack Video Games FX2 User Guide
Rikaline GPS Receiver GPS 6020 User Guide
Rival Fryer CZF630 User Guide
Roberts Gorden Electric Heater CRV Series User Guide
Rockford Fosgate Stereo Amplifier 250, 360, 400, 500, 600, 800, 1000 User Guide
Royal Sovereign Laminator RSH 1650 User Guide
Samsung Security Camera SNP 3300 User Guide
Sanyo Automobile Accessories HEC DR7700C User Guide
Sanyo Battery Charger HR 4 3FAUC User Guide