Samsung DVD Player AK68 00422A User Guide

DVD Player

DVD-HD945

AK68-00422A

Download from Www.Somanuals.com. All Manuals Search And Download.

Precautions

Before you start

Table of Contents

1. Setting up

The product unit accompanying this user manual is

licensed under certain intellectual property rights of

certain third parties. This license is limited to private

non-commercial use by end-user consumers for

licensed contents.

Setup

Accessories

* Refer to the identification label located on the back

panel of your player for its proper operating voltage.

* Install your player in a cabinet with adequate

ventilation holes. (7~10cm) Do not block ventilation

holes on any of the components for circulation of air.

* Do not push the disc tray by the hand.

* Do not stack components.

* Be sure to turn all components off before moving the

player.

* Before connecting other components to this player, be

sure to turn them off.

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Before you start . . . . . . . . . . . . . . . . . . . . . . . .3

General Features . . . . . . . . . . . . . . . . . . . . . . .4

Disc Type and Characteristics . . . . . . . . . . . . .5

Description-Front Panel . . . . . . . . . . . . . . . . . .6

Display Indicators . . . . . . . . . . . . . . . . . . . . . .7

Description-Rear Panel . . . . . . . . . . . . . . . . . .8

Tour of the Remote Control . . . . . . . . . . . . . . .9

DVD POWER

POWER

PRO

EAR

INSTANT

SKIP

PEN/

OSE

HDM

No rights are granted for commercial use.

The license does not cover any product unit other than

this product unit and the license does not extend to any

unlicensed product unit or process conforming to

ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in

combination with this product unit. The license only

covers the use of this product unit to encode and/or

decode audio files

conforming to the ISO/IEC 11172-3 or ISO/IEC

13818-3. No rights are granted under this license for

product features or functions that do not conform to the

ISO/IEC 11172-3 or ISO/IEC 13818-3.

VIEW

SUB

AUDIO

ANGLE

NDE

PAGE

SACD/

BOOKMARK

Batteries for

Remote Control

(AAA Size)

Connections

Choosing a Connection . . . . . . . . . . . . . . . . .10

Remote Control

* Be sure to remove the disc and turn off the player

after use, especially if you don’t use it for a long time.

Basic Functions

Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . .14

Using the Search & Skip Functions . . . . . . . .15

Using the Display Function . . . . . . . . . . . . . . .15

Using the Disc and Title Menu . . . . . . . . . . . .16

Using the Function Menu . . . . . . . . . . . . . . . .17

Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . .17

Slow Repeat Play . . . . . . . . . . . . . . . . . . . . . .18

Program Play & Random Play . . . . . . . . . . . .18

2. For your safety

* This product utilizes a laser. Use of controls or

adjustments or performance of procedures other than

those specified herein may result in hazardous

radiation exposure.

* Do not open covers and do not repair yourself.

Refer servicing to qualified personal.

CAUTION : USE OF ANY CONTROLS,

ADJUSTMENTS, OR PROCEDURES OTHER THAN

SPECIFIED HEREIN MAY RESULT IN

User’s Manual

Video/Audio Cable

HAZARDOUS RADIATION EXPOSURE.

3. Caution

* Your player is not intended for industrial use but for

domestic purposes. Use of this product is for

personal use only.

* Do not put any container filled with liquid or any small

metal objects on the player.

* Exterior influences such as lightning and static

electricity can affect normal operation of this player.

If this occurs, turn the player off and on again with the

POWER button, or disconnect and then reconnect the

AC power cord to the AC power outlet. The player will

operate normally.

* When condensation forms inside the player due to

sharp changes in temperature, the player may not

operate correctly. If this occurs, leave the player at

room temperature until the inside of the player

becomes dry and operational.

Advanced Functions

Adjusting the Aspect Ratio (EZ View) . . . . . . .19

Selecting the Audio Language . . . . . . . . . . . .20

Selecting the Subtitle Language . . . . . . . . . . .20

Changing the Camera Angle . . . . . . . . . . . . .21

Using the Instant Replay/Skip Function . . . . .21

Using the Bookmark Function . . . . . . . . . . . .22

Using the Zoom Function . . . . . . . . . . . . . . . .23

Super Audio CD Playback . . . . . . . . . . . . . . .23

DVD AUDIO Playback . . . . . . . . . . . . . . . . . .25

Clips Menu for MP3/WMA/JPEG/MPEG4 . . . .26

Folder Selection . . . . . . . . . . . . . . . . . . . . . . .27

MP3/WMA Playback . . . . . . . . . . . . . . . . . . .27

MPEG4 Playback . . . . . . . . . . . . . . . . . . . . . .28

Picture CD Playback . . . . . . . . . . . . . . . . . . .30

STANDBY/ON

HDMI - DVI Cable

HDMI Cable

Install Batteries in the Remote

1. Open the battery cover on the back of the

remote.

STANDBY/ON

2. Insert two AAA batteries. Make sure that the

polarities (+ and -) are aligned correctly.

3. Replace the battery cover.

Changing Setup menu

4. Disc

Using the Setup Menu . . . . . . . . . . . . . . . . . .31

Setting Up the Language Features . . . . . . . . .31

Setting Up the Audio Options . . . . . . . . . . . . .33

Surround Sound Speaker Setup . . . . . . . . . . .34

Setting Up the Display Options . . . . . . . . . . . .35

Setting Up the Parental Control . . . . . . . . . . .37

* Do not clean record-cleaning sprays, benzene,

thinner, or other volatile solvents that may cause

damage to the disc surface.

* Do not touch the disc’s signal surface. Hold by the

edges or by one edge and the hole in the center.

* Wipe the dirt away gently; never wipe a cloth back and

forth over the disc.

If remote doesn’t operate properly

• Check the polarity + - of the batteries (Dry-Cell)

• Check if the batteries are drained.

STANDBY/ON

• Check if remote sensor is blocked by obstacles.

• Check if there is any fluorescent lighting nearby.

Reference

5. Environmental info

Controlling a TV with the Remote . . . . . . . . . .39

Firmware upgrade . . . . . . . . . . . . . . . . . . . . .40

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . .41

Specifications . . . . . . . . . . . . . . . . . . . . . . . .43

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

* The battery used in this product contains chemicals

that are harmful to the environment.

* So, dispose of batteries in the proper manner,

according to federal, state, and local regulations.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-2

ENG-3

General Features

Disc Type and Characteristics

Excellent Sound

MPEG4

This DVD player is capable of playing the following types of discs with the corresponding logos:

Dolby Digital, a technology developed by Dolby

Laboratories, provides crystal clear sound

reproduction.

This unit can play MPEG4 formats within an avi file.

Recording Types Disc Size Max. Playing Time

Characteristics

Disc Types (Logos)

DVD AUDIO

DVD AUDIO is a format specifically designed to

provide the highest possible audio fidelity capable

on DVD.

• DVD contains excellent sound and

video due to Dolby Digital and

MPEG-2 system.

Single-sided 240 min.

DVD-VIDEO

12 Cm

Double-sided 480 min.

Audio

Screen

Video with MPEG-2 compression technology.

Both regular and widescreen(16:9) pictures can be

viewed.

• Various screen and audio functions

can be easily selected through the

on-screen menu.

Single-sided 80 min.

Video

HDMI (High Definition Multimedia Interface)

HDMI reduces picture noise by allowing a pure

digital video/audio signal path from the player to

your TV.

8 Cm

Double-sided 160 min.

Slow Motion

An important scene can be viewed in slow motion.

VIDEO-CD

AUDIO-CD

74 min.

20 min.

12 Cm

8 Cm

Audio

Video

• Video with CD sound, VHS

quality & MPEG-1 compression

technology.

Note

Programmed Play (CD)

You can program tracks to play in desired order.

* Discs which cannot be played with this player.

• DVD-ROM

• CD-ROM

• CDI

• DVD-RAM

• CDV

• CVD

Parental Control (DVD)

• CD is recorded as a Digital Signal

with better audio quality, less

distortion and less deterioration of

audio quality over time.

74 min.

20 min.

12 Cm

8 Cm

The parental control allows users to set the level

necessary to prohibit children from viewing harmful

movies such as those with violence, adult subject

matter, etc.

• CDGs play audio only, not graphics.

Audio

* Ability to play back may depend on recording

conditions.

• DVD AUDIO is a format specifically

designed to provide the highest

possible audio fidelity capable on

DVD.

DVD AUDIO

• DVD-R, +R

• CD-RW

Audio

Video

Various On-Screen Menu Functions

You can select various languages (Audio/Subtitle)

and screen angles while enjoying movies.

• DVD+RW, -RW

400 min.

74 min.

12 Cm

* The unit may not play certain CD-R, CD-RW and

DVD-R due to the disc type or recording

conditions.

EZ VIEW (DVD)

Easy View can convert Letter Box images to full

screen viewing on your conventional TV.

Super Audio CD

•

Super Audio CD is a high quality audio

format with higher sampling rates and fuller,

richer sound as compared to regular CD.

Audio

COPY PROTECTION

Digital Photo Viewer (JPEG)

Many DVD discs are encoded with copy

protection. Because of this, you should only

connect your DVD player directly to your TV, not

to a VCR. Connecting to a VCR results in a

distorted picture from copy-protected DVD

discs.

Disc Markings

Play Region Number

You can view Digital Photos on your TV.

Both the DVD player and the discs are coded by region.

These regional codes must match in order for the disc to

play. If the codes do not match, the disc will not play.

Repeat

Play Region Number

You can repeat a song or movie simply by pressing

the REPEAT button.

PAL broadcast system in U.K, France,

Germany, etc.

The Region Number for this player is described on the

rear panel of the player.

PAL

MP3/WMA

This unit can play discs created from MP3/WMA

files.

This product incorporates copyright protection

technology that is protected by methods claims of

certain U.S. patents and other intellectual property

rights owned by Macrovision Corporation and other

rights owners. Use of this copyright protection

technology must be authorized by Macrovision

Corporation, and is intended for home and other

limited viewing uses only unless otherwise

Dolby Digital disc

Stereo disc

DivX Certification

STEREO

Instant Replay (DVD)

This function is used to replay the previous

10 seconds of a movie from the current position.

DivX, DivX Certified, and

associated logos are

trademarks of DivXNetworks, Inc and

are used under license.

DIGITAL

SOUND

Digital Audio disc

DTS disc

Instant Skip (DVD)

This function skips playback ahead 10 seconds.

authorized by Macrovision Corporation.

Reverse engineering or disassembly is prohibited.

MP3 disc

Super Audio CD

Super Audio CD is a high quality audio format with

higher sampling rates and fuller, richer sound as

compared to regular CD.

Super Audio CD disc

DVD AUDIO disc

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-4

ENG-5

Description-Front Panel

Display Indicators

10 11 12 13 14 15 16 17

STANDBY

Front Panel Controls

Front Panel Display

1. DVD : DVD is loaded

1. STANDBY/ON (

• When the unit is first plugged in, the red indicator lights.

When STANDBY/ON button is pressed on, the blue light appears and the player is turned on.

)

Audio : DVD-Audio disc is playing

2. Super Audio CD is loaded

2. DISC TRAY

• Place the disc here.

3. DTS (Digital Theater System) output

4. Dolby-Digital Disc

3. OPEN/CLOSE (

)

• Press to open and close the disc tray.

5. Progressive Scan Video output

6. DVD-Audio : Group number

7. DVD-Video : Title number

4. DISPLAY

• Operation indicators are displayed here.

5. STOP (

• Stops disc play.

)

8. DVD-Audio, CD, Video CD, Super Audio CD :Track number

9. DVD-Video : Chapter number

6. SKIP (

) / SEARCH

• Use to reverse skip a scene or music.

10. DVD-Audio : Index number

7. PLAY/PAUSE (

• Begin or pause disc play.

)

11. Disc type indicators : SVCD, VCD, CD

12. MPEG Audio output

8. REMOCON RECEIVER

13. CVD Disc indicator

9. SKIP (

) / SEARCH

14. MP3 Audio output

• Use to forward skip a scene or music.

15. Linear PCM audio output

16. Lights when the device connected to the HDMI Jack is a DVI device

17. Lights when the device connected to the HDMI Jack is a HDMI device

18. Displays various messages concerning operations such as PLAY, STOP, LOAD ...

no DISC : No disc loaded.

OPEN : The disc tray is open.

LOAD : Player is loading disc information.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-6

ENG-7

Description-Rear Panel

Tour of the Remote Control

This remote control can also control most TVs. See page 39.

8. SEARCH Buttons (

• Allow you to search forward/backward through a disc.

)

DVD POWER

TV POWER

9. STOP Button (

10. MENU Button

)

• Brings up the DVD player’s menu.

11. RETURN Button

• Returns to a previous menu.

12. ZOOM Button

PROG

CLEAR

• Enlarges DVD picture.

INSTANT

13. AUDIO Button

STEP

REPLAY

SKIP

•

Use this button to access various audio functions on a disc.

VOL

TV/VIDEO

OPEN/CLOSE

14. SUBTITLE Button

15. INDEX Buttons

VIDEO SEL.

HDMI SEL.

• Use to skip the INDEX.

16. SACD/CD Button

• Selects Super Audio CD or CD playback mode.

Rear Panel

17. SHUTTLE DIAL (Search mode)

1. DIGITAL AUDIO OUT JACKS

• Use an optical or coaxial digital cable to connect

to a compatible Dolby Digital receiver.

7. COMPONENT OUT JACKS

• Performs fast motion play.

• Use these jacks if you have a TV with

Component Video in jacks. These jacks provide

Pr, Pb and Y video.

• If Component (Pscan) & HDMI Video Output is

selected in Setup Menu, interlaced scan mode

and Video, S-Video will not work.

• If Component (Iscan) Video Output is selected

in Setup Menu, progressive scan and HDMI

mode will not work.

18. TV POWER button

• Turns the TV’s power on or off.

Use to connect to an A/V Amplifier that contains

a Dolby Digital or DTS decoder.

19. CLEAR Button

•

Use to remove menus or status displays from the screen.

20. INSTANT SKIP Button

2. 5.1CH ANALOG AUDIO OUT JACKS

• Connect to an amplifier with 5.1ch analog input

jacks.

• This function skips playback ahead 10 seconds.

ZOOM

EZ VIEW

REPEAT

21. INSTANT REPLAY Button

• This function is used to replay the previous 10

seconds of a movie from the current position.

SUBTITLE

AUDIO

ANGLE

PRE.

22. CH

Buttons

3. AUDIO OUT JACKS

• Connect to the Audio input jacks of your

television, audio/video receiver.

• Channel selection.

INDEX

PAGE

8. SCART JACK

• Connect to a TV scart input jack.

PRE.

23. OPEN/CLOSE (

) Button

SACD/CD

BOOKMARK

• To open and close the disc tray.

24. HDMI SEL. Button

4. VIDEO OUT JACK

• Use a video cable to connect to the Video input

jack on your television.

• The Video Output in Setup Menu must be set to

Component (Iscan), SCART Output or

S-Video.

Important Note

• HDMI or DVI Output resolution setup.

• Consult your TV User’s Manual to find out if your

TV supports Progressive Scan. If Progressive

Scan is supported, follow the TV User’s Manual’s

instructions regarding Progressive Scan settings in

the TV’s menu system.

25. SKIP Buttons (

)

• Use to skip the title, chapter, or track.

26. PLAY/PAUSE Button (

)

• Begin/Pause disc play.

27. INFO Button

• Displays the current disc mode.

5. S-VIDEO OUT JACK

• If Component(Pscan) & HDMI Video Output is

selected in Setup Menu, Video and S-Video,

SCART will not work.

28. DISC MENU Button

• Use the S-Video cable to connect this jack to

the S-Video jack on your television for a higher

quality picture.

• The Video Output in Setup Menu must be set to

S-Video.

• Brings up the Disc menu.

29. ENTER/DIRECTION Button

DVD Function Buttons

1. DVD POWER Button

• Turns the power on or off.

2. NUMBER Buttons

3. PROG Button

(UP/DOWN or LEFT/RIGHT Buttons)

• This button functions as a toggle switch.

• The HDMI output of this unit can be connected to

a DVI jack on a TV or other device using a conver-

sion adapter. In this case, it is necessary to use a

TV or display with an HDCP-compatible DVI input.

30. EZ VIEW Button

• Easy View can convert Letter Box images to full

screen viewing on your conventional TV.

6. HDMI OUT JACK

• There may be no image output if connected to a

TV or display that is not compatible with the above

format.

31. ANGLE Button

• Use the HDMI or HDMI-DVI cable to connect

this jack to the HDMI or DVI jack on your

television for the best quality picture.

• If HDMI cable is connected with TV available for

HDMI output, HDMI mode will work

automatically.

• Allows you to program a specific order.

• Use to access various camera angles on a DVD.

4. STEP Button

• Advances play one frame at a time.

32. REPEAT Button

• Allows you to repeat play a title, chapter, track, or disc.

• Refer to the instruction manual of the TV or display

to be connected to this unit for detailed information

regarding the HDMI terminal.

5. VOL +/- Buttons

• Control volumes.

33. PAGE Buttons

• Use to skip the PAGE.

6. TV/VIDEO Button

• Press to display all of the available video sources

( i.e., TV, Cable, Video)

34. BOOKMARK Button

• See page 36 to get more information on how to

use the setup menu.

35. JOG DIAL (Step mode)

• Operates frame by frame play. In CD mode, performs

track search.

7. VIDEO SEL. Button

• Selects Video output format.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-8

ENG-9

Choosing a Connection

The following shows examples of connections commonly used to connect the DVD player with a TV

and other components.

Connection to a TV (For Video)

TV (Normal, Widescreen, Projection, etc..)

Method 1

Method 2

S-Video

Method 3

Method 4

Before Connecting the DVD Player

• Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.

• If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.

Basic Audio

Video

SCART Jack

Interlace scan

• Refer to the owner’s manual of the additional components you are connecting for more information on those

particular components.

Connection to an Audio System

Scart

Cables

(not

Video

Cables

S-Video

Cable

supplied)

Method 1

Method 2

Method 3

AUDIO

SYSTEM

DVD

Player

5.1ch Analog Amplifier

Audio Input Jacks

2ch Amplifier

Dolby Digital Decoder

Digital Audio Input Jack

SCART Jack

Component Jacks

Audio Output

Jacks

Video Output

Jack

S-Video Jack

Audio Input Jacks

1. Connect a cable with the desired method.

2. Turn on your TV and DVD Player.

3. Set your TV the correct video input by pressing TV/VIDEO button on. (See page 39)

4. Select the video output according to the cable connection.

If you use the VIDEO SEL. button, you can change easily video output in no disc mode.

Method 1

DVD Player + TV with Video Input Jack

(The Video Output in Setup Menu must be set to S-Video, SCART or Component (Iscan).)

DVD

Player

Method 2

DVD Player + TV with S-Video Input Jack

(The Video Output in Setup Menu must be set to S-Video.)

Method 3

Audio Output Jaks

(2 Channel)

5.1CH Analog Audio Output Jacks

(Multi Channel)

Digital Audio Output Jack

DVD Player + TV with Scart Input Jacks (Audio & Video)

(The Video Output in Setup Menu must be set to SCART Output.)

Method 4

DVD Player + TV with Component Video Jacks

(The Video Output in Setup Menu must be set to Component (Iscan).)

Note

• DVD-AUDIO only plays back two channel audio through the Digital Audio out. Multi-channel DVD-Audio discs

are output through the Analog outputs.

• Super Audio CD plays back only through the Analog outputs. (See page 33~34)

Note

• If you press the VIDEO SEL. button, Video output mode is changed in regular sequence in no disc mode.

(S-Video ➝ Iscan ➝ Pscan & HDMI ➝ SCART RGB ➝ SCART Video)

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-10

ENG-11

Choosing a Connection

Connection to a TV (For Progressive scan, Digital Video)

HDMI VIDEO Specifications

When you press the HDMI SEL. button, in case of PAL TV system 576p, 720p, 768p, 1080i are selected in order.

When you press the HDMI SEL. button, in case of NTSC TV system 480p, 720p, 768p, 1080i are selected in

order.

Method 2

Method 3

Method 1

The first press of the HDMI SEL. button, brings up the current resolution.

The second press allows you to change the HDMI output resolution.

* The specific resolution of HDMI output may not work depending on your TV.

* Refer to the TV users manual.

Digital Video DVI Audio Input

HDMI Input

Progressive scan

Basic Audio

Important Note

• HDMI (High Defintion Multimedia Interface)

HDMI is an interface to enable the digital transmission of video and audio data with just a single connector.

Using HDMI, the DVD player transmits a digital video and audio signal and displays a vivid picture on a TV

having a HDMI jack.

• Description of the HDMI connection

HDMI connector - Both uncompressed video data and digital audio data(LPCM or Bit Stream data).

• Though the player uses a HDMI cable, the player outputs only a pure digital signal to the TV.

• If TV does not support HDCP (High-bandwidth Digital content protection), snow noise appears on the screen.

DVD

Player

• Why does Samsung use HDMI?

Component Jacks

HDMI Output Jack Audio Output Jacks

HDMI Output Jack

Audio Output Jacks

Analog TVs require an analog video/audio signal. However, when playing a DVD, the data transmitted to a TV is

digital. Therefore either a digital-to-analog converter(in the dvd player) or an analog-to-digital converter (in the

TV) is required. During this conversion, the picture quality is degraded due to noise and signal loss.

DVI technology is superior because it requires no D/A conversion and is a pure digital signal from the player to

your TV.

Method 1

DVD Player + TV with Component Video Jacks.

(The Video Output in Setup Menu must be set to Component (Pscan) & HDMI.)

• What is the HDCP?

HDCP(High-bandwidth Digital Content Protection) is a system for protecting DVD content outputted via DVI

from being copied. It provides a secure digital link between a video source(PC, DVD. etc) and a display

device(TV, projector . etc). Content is encrypted at the source device to prevent unauthorized copies from being

made.

Method 2

DVD Player + TV with DVI Jack.

• Depending on your TV, your hookup for Method 2 may differ from the illustration.

(The Video Input on TV must be set to DVI.)

Method 3

PROGRESSIVE SCAN OUTPUT (525p/625p)

DVD Player + TV with HDMI Jack.

“CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE

FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE

DISPLAYED IN THE PICTURE, IN CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE

PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE

‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV

SET COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD PLAYER, PLEASE

CONTACT OUR CUSTOMER SERVICE CENTER.”

• Depending on your TV, your hookup for Method 3 may differ from the illustration.

(The Video Input on TV must be set to HDMI.)

Important Note

• Consult your TV User’s Manual to find out if your TV supports Progressive Scan, DVI or HDMI.

If Progressive Scan, HDMI is supported, follow the TV User’s Manual’s instructions regarding Progressive

Scan, HDMI settings in the TV’s menu system.

• When the Video output is Pscan & HDMI Video and S-Video, SCART will not work.

• If you want to convert Video Output to Progressive Scan, select Component (Pscan) & HDMI in SETUP menu

and then select “Yes” within 10 seconds. Finally change the TV's external input to Component(576p/480p). (See

Page 36)

• Use the VIDEO SEL. button to easily change the video output in no disc mode. (See page 11)

• If HDMI or HDMI-DVI cable is pluged in TV, the player output is Pscan & HDMI out automatically.

• Refer to your TV user's manual.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-12

ENG-13

Playing a Disc

Using the Search & Skip Functions

Using the Display Function

7. Step Motion Play

Before Play

During play, you can search quickly through a

chapter or track or use the skip function to

jump to the next selection.

When Playing a DVD/VCD/CD

(Except CD/DVD-AUDIO/Super Audio CD)

Turn the Jog dial clockwise or press the STEP button on

the remote during play.

- Each time the button is pressed or Jog Dial is turned, a

new frame will appear.

- No sound is heard during STEP mode.

- Press PLAY/PAUSE (

play.

• Turn on your TV and set it to the correct Video

Input by pressing TV/VIDEO button on the TV

remote control.

• If you connected an external Audio System, turn

on your Audio System and set it to the correct

Audio Input.

1. During play, press the INFO button on the remote.

2. Use the UP/DOWN buttons to select the desired

item.

Searching through a Chapter or Track

3. Use the LEFT/RIGHT buttons to make the

desired setup and then press ENTER.

• You may use the number buttons of the remote

control to directly access a title, chapter or to

start the playback from the desired time.

During play, press the SERACH (

) button

) button to resume normal

and press again to search at a faster speed.

• You can also use the Shuttle dial on the remote by

After plugging in the player, the first time you press

the DVD POWER button, this screen comes up :

If you want to select a language, press a

NUMBER button. (This screen will only appear

when you plug in the player for the first time.)

If the language for the startup screen is not set,

the settings may change whenever you turn the

power on or off. Therefore, make sure that you

select the language you want to use.

- You can only perform step motion play in the forward

direction.

turning.

- Forward Shuttle dial :

1/8 ➝➝ 1/4 ➝

1/2 ➝➝Play ➝

4. To make the screen disappear, press the INFO

button again.

2X ➝➝ 4X ➝➝ 8X

8. Slow Motion Play

(Except CD/DVD-AUDIO/Super Audio CD)

Press the FWD SEARCH (

during PAUSE or STEP mode.

- By pressing the FWD SEARCH (

select slow motion play for 1/8, 1/4 or 1/2 of normal

speed.

- No sound is heard during slow mode.

- Press PLAY/PAUSE (

- Reverse Shuttle dial :

2X ➝➝ 4X ➝➝ 8X

) button on the remote

• In case of Super Audio CD, when the clips menu is off,

you can use this function. (See page 24)

) button, you can

DVD

2X, 4X, 64X, 128X

4X, 8X

DVD

VCD

Title

CD/Super Audio

CD/DVD-AUDIO

Chapter

2X, 4X, 8X

) to resume normal play.

0:00:13

Time

- Reverse slow motion play will not work.

ENG 5.1CH

Audio

Off

Subtitle

RESUME function

Skipping Tracks

When you stop disc play, the player remembers

where you stopped, so when you press

During play, press the

button.

button, it

PLAY/PAUSE (

where you left off. (unless the disc is removed or the

player is unplugged, or if you press the STOP (

button twice.)

) button again, it will pick up

• When playing a DVD, if you press the

moves to the next chapter. If you press the

VCD

)

moves to the beginning of the chapter. One more press

makes it move to the beginning of the previous chapter.

Play

Track

0:00:48

Time

1. Press the OPEN/CLOSE button.

The STANDBY indicator light goes out and the tray

opens.

• When playing a VCD 2.0 in Menu Off mode, a VCD 1.1,

Super Audio CD, DVD-AUDIO or a CD, if you press the

button, it moves to the next track.

Note

• If the player is left for about 5 minutes in pause

mode, it will stop.

If you press the

button, it moves to the beginning of

2. Place a disc gently into the tray with the disc’s

label facing up.

the track. One more press makes it move to the beginning

of the previous track.

• If the player is left in the stop mode for more than

about 30 minutes, the power will automatically shut

off. (Automatic Power-Off Function)

3. Press the PLAY/PAUSE (

) button or

• If a track exceeds 15 minutes when playing a VCD and

OPEN/CLOSE button to close the disc tray.

• If the player is left in the stop mode for more than

one minute without any user interaction, a screen

saver will be activated. Press the PLAY/PAUSE

you press the

button, it moves forward 5 minutes, in

menu off mode. If you press the

backward 5 minutes.

button, it moves

4. Stopping Play

Track

0:00:48

Time

Press the STOP (

) button during play.

(

) button to resume normal play.

• This

icon indicates an invalid button press.

5. Removing Disc

Press the OPEN/CLOSE button.

Note

6. Pausing Play

• When playing a VCD 2.0, you can choose Menu

On or Menu Off by using the DISC MENU

button.

Press the PLAY/PAUSE (

remote during play.

- Screen stops, no sound.

- To resume, press the PLAY/PAUSE (

again.

) or STEP button on the

) button once

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-14

ENG-15

Using the Display Function

Using the Function Menu

Repeat Play

Using the Disc and Title Menu

To access the desired title when there is

Using the Function Menu

Repeat the current track, chapter, title, a

chosen section (A-B), or all of the disc.

Using the Disc Menu

more than one in the disc.

For example, if there is more than one

movie on a DVD, each movie will be

identified.

Title

1. Press the MENU button during playback.

1. During the playback of a DVD disc, press the

MENU button on the remote.

2. Use the UP/DOWN buttons to highlight Function,

then press the RIGHT or ENTER button.

1. Press the REPEAT button on the remote.

Repeat screen appears.

2. Select Disc Menu using the UP/DOWN buttons,

then press the RIGHT or ENTER button.

3. Function selection screen appears: Info, Zoom,

Bookmark, Repeat, EZ View and Front Display.

2. Select Chapter, Title or A-B using the

LEFT/RIGHT buttons.

Most DVD discs are recorded in

chapters so that you can quickly find a

specific passage (similar to tracks on an

audio CD).

Chapter

Info (See Page 15~16)

• Chapter (

) : repeats the chapter that is playing.

- Zoom (See Page 23)

• Title ( _T) : repeats the title that is playing.

• A-B : repeats a segment of the disc that you select.

Bookmark (See Page 22)

Repeat (See Page 17)

Allows playback of the film from a

desired time. You must enter the starting

time as a reference.

* A-B REPEAT

• Press ENTER at the point where you want the repeat

play to start (A).

• Press ENTER at the point where you want the repeat

play to stop (B).

• To terminate the function, press the 'CLEAR' button.

• A-B REPEAT does not allow you to set point (B) until at

least 5 seconds has elapsed after point (A) has been

set.

- EZ View (See Page 19)

Time

Audio

- Front Display : On

On : Lights when the front display is selected ON.

Refers to the language of the film

soundtrack. In the example, the

soundtrack is played in English 5.1CH.

A DVD disc can have up to eight

different soundtracks.

4. Use the UP/DOWN button to highlight one of the

6 functions. Then press the RIGHT or ENTER

button to access the function.

Using the Title Menu

1. During the playback of a DVD disc, press the

MENU button on the remote.

DVD

2. Select Title Menu using the UP/DOWN buttons,

then press the RIGHT or ENTER button.

Refers to the subtitle languages

available in the disc.

Subtitle

REPEAT ENTER

Off

01 A - B

You will be able to choose the subtitle

languages or, if you prefer, turn them off

from the screen.

A DVD disc can have up to 32 different

subtitles.

VCD/CD

Note

REPEAT ENTER

Off

01 A - B

• You can also directly select these functions using

their respective buttons on the remote.

Note

• When VCD 2.0 is in Menu Off mode only, this

function works. (See page 15)

3. Press ENTER.

Note

4. To return to normal play, press REPEAT again,

then press the LEFT/RIGHT buttons to select Off

and press ENTER.

• Depending on a disc, the Title and Disc Menus

may not work.

• Title Menu will only be displayed if there are at

least two titles in the disc.

• You can also use the Disc Menu, using the DISC

MENU button on the remote.

Note

• DVD repeats play by chapter or title, CD and VCD

repeat play by disc or track.

• In VCD 2.0, the DISC MENU button is used to

select Menu On or Menu Off mode.

• Depending on a disc, the Repeat function may not

work.

• When VCD 2.0 is in Menu Off mode only, this

function works. (See page 15)

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-16

ENG-17

Slow Repeat Play

Program Play & Random Play

Adjusting the Aspect Ratio (EZ View)

This feature allows you to slowly repeat

scenes containing sports, dancing, musical

instruments being played etc. so you can

study them more closely.

Program Play (CD)

To play back using aspect ratio (DVD)

Press the EZ VIEW button.

If you are using a 4:3 TV

1. Press the PROG button.

1. For 16:9 aspect ratio discs

• The screen size changes when the button is

pressed repeatedly.

• The screen zoom mode operates differently

depending on a screen setting in the initial setup

menu.

• To ensure correct operation of the EZ VIEW

button, you should set the correct aspect ratio in

the initial setup (See page 35).

• 4:3 Letter Box

2. Use the LEFT/RIGHT buttons to select

PROGRAM. Press the ENTER button.

Displays the content of the DVD title in 16:9

aspect ratio. The black bars will appear at the

top and bottom of the screen.

When playing a DVD/VCD

3. Use the LEFT/RIGHT/UP/DOWN buttons to select

the first track to add to the program.

Press the ENTER button. The selection numbers

appear in the Program Order box.

1. During play, press the PLAY/PAUSE (

button.

)

• 4:3 Pan Scan

The left and right of the screen are cut off and

displays the central portion of the 16:9 screen.

2. Press the FWD SEARCH (

) button on the

4. Press the PLAY/PAUSE (

The disc will be played in programmed order.

) button.

remote during PAUSE or STEP mode.

• Screen Fit

The top and bottom of the screen are cut off

and the full screen appears.

3. Press the REPEAT button on the remote.

Repeat screen appears.

If you are using a 16:9 TV

1. For 16:9 aspect ratio discs

PROGRAM

RANDOM

The picture will look vertically stretched.

4. Select A-B using the LEFT/RIGHT buttons.

•

Wide Screen

• Zoom Fit

5. Press ENTER at the point where you want the

repeat play to start (A).

• A-B REPEAT does not allow you to set point (B) until at

least 5 seconds has elapsed after point (A) has been

set.

Displays the content of the DVD title in 16:9

aspect ratio.

The top, bottom, left and right of the screen are

cut off and the central portion of the screen is

enlarged.

• Screen Fit

PROGRAM 01

The top and bottom of the screen are cut off.

When playing a 2.35:1 aspect ratio disc, the

black bars at the top and bottom of the screen

will disappear. The picture will look vertically

stretched. (Depending on a type of disc, the

black bars may not disappear completely.)

Track

Program Order

2. For 4:3 aspect ratio discs

- - - - - -

- - - - - - - -

01 02 03 04

05 06 07 08

09 10 11 12

13 14 15 16

6. Press ENTER at the point where you want repeat

play to stop (B).

• Normal Screen

Displays the content of the DVD title in 4:3

aspect ratio.

7. To return to normal play, press the CLEAR button

CLEAR

and then press the PLAY/PAUSE (

) button.

• Screen Fit

The top and bottom of the screen are cut off

and the full screen appears.

• Zoom Fit

The top, bottom, left and right of the screen are

cut off and the central portion of the screen is

enlarged.

The picture would look vertically stretched.

Note

• Zoom Fit

Random Play (CD)

• The disc will play from A to B repeatedly at the

speed you chose.

The top, bottom, left and right of the screen are

cut off and the central portion of the screen is

enlarged.

2. For 4:3 aspect ratio discs

1. Press the PROG button.

• Normal Wide

2. Use the LEFT/RIGHT buttons to select RANDOM.

Press the ENTER button.

• When VCD 2.0 is in Menu Off mode only, this

function works. (See page 15)

Displays the content of the DVD title in 16:9

aspect ratio. The picture will look horizontally

stretched.

PROGRAM

RANDOM

• Screen Fit

The top and bottom of the screen are cut off

and the full screen appears.

Note

• This function may behave differently depending on

a type of disc.

The picture will look vertically stretched.

• Zoom Fit

Note

The top, bottom, left and right of the screen are

cut off and the central portion of the screen is

enlarged.

• Depending on a disc, the Program and Random

Play functions may not work.

• This unit can support a maximum of 20

programmed tracks.

• Vertical Fit

When a 4:3 DVD is viewed on a 16:9 TV, black

bars will appear at the left and right of the

screen in order to prevent the picture from

looking horizontally stretched.

• While in playback mode, press the CLEAR button

on the remote control to cancel Programmed Play

or Random Play.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-18

ENG-19

Selecting the Audio Language

Selecting the Subtitle Language

Changing the Camera Angle

Using the Instant Replay/Skip Function

You can select a desired audio quickly and

easily with the AUDIO button.

You can select a desired subtitle quickly and

easily with the SUBTITLE button.

When a DVD contains multiple angles of a

particular scene, you can use the ANGLE

function.

Using the Instant Replay function (DVD)

If you miss a scene, you can see it again using

this function.

Using the AUDIO button

Using the SUBTITLE button

Using the ANGLE button

If you press the INSTANT REPLAY button, the

current scene moves backward about 10 seconds,

and plays back.

1. Press the AUDIO button.

1. Press the SUBTITLE button.

- The subtitle languages are represented by

abbreviations.

If the disc contains multiple angles, the ANGLE

mark appears on the screen.

2. The Audio changes when the button is pressed

repeatedly.

The audio languages are represented by abbreviations.

* Depending on a disc, the Instant Replay function may not

work.

2. The subtitle changes when the button is pressed

repeatedly.

1. Press the ANGLE button, then ANGLE icon will

appear with the current angle number and the

number of angles available.

DVD

AUDIO

ENG DOLBY DIGITAL 5.1CH

2. Press the ANGLE button repeatedly to the

desired angle.

SUBTITLE

Off

3. To remove the ANGLE icon, press the CLEAR or

RETURN button.

- In case of a VCD or CD, you can select among Stereo,

Right or Left.

ANGLE

4/6

- Use the LEFT/RIGHT buttons to select the desired

subtitle language on a MPEG4 then press the ENTER.

VCD/CD

MPEG4

AUDIO

Stereo

Using the Instant Skip function (DVD)

None

Use this function to skip playback about 10

seconds ahead of the current scene.

- Use the LEFT/RIGHT buttons to select the desired

Audio on a MPEG4 then press the ENTER.

Press the INSTANT SKIP button.

Note

- Playback will skip ahead 10 seconds.

- Depending on a disc, this function may not work.

3. To remove the SUBTITLE icon, press the CLEAR

or RETURN button.

• If the disc has only one angle, this feature won’t

work. Currently, very few discs have this feature.

MPEG4

Note

• This function depends on what subtitles are

encoded on the disc and may not work.

3. To remove the AUDIO icon, press the CLEAR or

RETURN button.

• A DVD disc can contain up to 32 subtitle

languages.

• How to have the same subtitle language come

up whenever you play a DVD;

Refer to “Setting Up the Language Features” on

page 33.

Note

• This function depends on what audios are

encoded on the disc and may not work.

• A DVD disc can contain up to 8 audio languages.

• How to have the same audio language come up

whenever you play a DVD;

Refer to “Setting Up the Language Features” on

page 32.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-20

ENG-21

Using the Bookmark Function

Using the Zoom Function

Super Audio CD Playback

1. Open the disc tray.

This feature lets you bookmark sections of a

DVD or VCD (Menu Off mode) so you can

quickly find them at a later time.

Recalling a Marked Scene

Using the Zoom Function (DVD/VCD)

2. Place the Super Audio CD disc on the tray.

- Place the Super Audio CD disc with the labeled

side up.

1. During play or pause mode, press the ZOOM

button on the remote.

A Zoom mark will be displayed on screen.

1. During play, press the BOOKMARK button on the

remote.

Using the Bookmark Function (DVD/VCD)

2. Use the LEFT/RIGHT buttons to select a marked

scene.

2. Use the UP/DOWN or LEFT/RIGHT buttons to

select the part of the screen you want to zoom in

on.

3. Close the tray.

- The tray closes and you should get a screen

that looks like the one below.

1. During play, press the BOOKMARK button on the

remote.

3. Press the PLAY/PAUSE (

the marked scene.

) buttons to skip to

2. Use the LEFT/RIGHT buttons to move to the

desired bookmark icon.

3. Press the ENTER button.

- During DVD play, press ENTER to zoom in

2X/4X/2X/Normal in order.

3. When you reach the scene you want to mark,

press the ENTER button. The icon will change to

a number (1, 2, or 3).

- During VCD play, press ENTER to zoom in 2X/Normal

in order.

4. Press the BOOKMARK button to turn Off the

display.

Clearing a Bookmark

1. During play, press the BOOKMARK button on the

remote.

Super Audio CD Clips Menu On Play

Function

1. Use the UP/DOWN buttons to select a music title.

2. Use the LEFT/RIGHT buttons to select the

bookmark number you want to delete.

2. Press the ENTER button to begin playback of the

music title.

- If you want to use the Repeat Function, press the

REPEAT button to change the mode, such as Off,

Track, Disc.

3. Press the CLEAR button to delete a bookmark

number. Press the BOOKMARK button to turn Off

the display.

*Off : Normal Playback

*Track : Repeats the current music title.

*Disc : Repeats the music titles in the Super

Audio CD.

Note

• Up to three scenes may be marked at a time.

- If you want to see information about the Disc title

and Artist, press the INFO button.

- If you want to convert into regular CD mode,

press the SACD/CD button.

• When VCD 2.0 is in Menu Off mode only, this

function works. (See page 15)

• Depending on a disc, the Bookmark function may

not work.

- During play or stop mode, you can change the

2CH or MULTI mode by using LEFT/RIGHT

buttons. (You can use this function when Super

Audio CD disc includes multi channel and 2

channel audio format.)

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-22

ENG-23

Super Audio CD Playback

SDuVpDeAr UADudIOioPClaDybPalacykback

1. Open the disc tray.

Most DVD AUDIO discs are recorded in

Group, you can change Groups with this

Function.

Super Audio CD Clips Menu Off Play

Function

CD Layer Play Function

During Super Audio CD playback, press the

SACD/CD button to playback the CD layer of a dual

layer Super Audio CD disc. (Refer to the page 15 for

setting CD playback Function).

2. Place the DVD AUDIO disc on the tray.

1. In Stop mode, press the DISC MENU button until

the Clips menu is off.

Place the DVD AUDIO disc with the labeled side up.

Note

* Bonus Group playback.

3. Close the tray.

- The tray closes and disc plays.

2. During playback, press the INFO button and the

screen below appears.

• Some DVD AUDIO discs have Bonus

groups. If you want to play a Bonus

group, you must enter the Bonus

Group code. The code is usually on the

DVD AUDIO disc case.

3. Use the UP/DOWN buttons to select the desired

item.

Track

Using the Display Function

0:00:13

Time

1. During play, press the INFO button on the remote.

SACD

2. Use the UP/DOWN buttons to select the desired

item.

Track

To access the desired Track when there is

more than one on the DVD AUDIO disc.

0:00:13

Time

MULTI

Audio

3. Use the LEFT/RIGHT buttons to make the

desired setup and then press ENTER.

• You may use the number buttons of the remote

control to directly access a Group, Track, Page

or to start the playback from the desired time.

If pages are included with the

DVD-AUDIO, you can see this icon.

To access the desired page, you can

use this Function.

To access the desired Track when there

is more than one in the disc.

If a slide show is included with the

DVD-AUDIO, you can see this icon.

In this case you cannot use PAGE

PRE./NEXT buttons.

4. To make the screen disappear, press the INFO

button again.

4. Use the LEFT/RIGHT buttons to make the

desired setup and then press ENTER.

• You may use the number buttons of the remote

control to directly access a track and to start the

playback from the desired time.

Allows playback from a desired time.

You must enter the starting time as a

reference.

If a video zone is included with the

DVD-AUDIO, you can see this icon.

In this case you cannot use PAGE

PRE./NEXT buttons.

DVD AUDIO

Group

Track

Page

To access the desired Track when there

is more than one in the disc.

0:00:13

Time

Note

Allows playback of the music from a

desired time by using the number buttons.

• Some Super Audio CD discs do not include a CD

Allows playback from a desired time by

using the number buttons.

layer.

• Depending on a disc, this function may not work.

Page, Index Function

1. Use PAGE PRE./NEXT buttons to Skip the Page

when there is more than one in a group.

• Some DVD-AUDIO discs include a slide show. In

the slide show mode, this function can not use.

• PAGE is still images. You can see the still

images when playback DVD-AUDIO disc.

If you want to change the 2channel or

multi channel play or stop mode, press

AUDIO button.

- You can use this function when Super

Audio CD disc includes multi channel

and 2 channel audio format.

Note

Some DVD-AUDIO discs don’t audio down-mixing.

These discs always output 5.1ch analog audio

regardless of audio setup.

• 2CH : L, R

• MULTI : F/L, F/R, R/L, R/R, C/T, S/W

2. Use INDEX PRE./NEXT buttons to Skip the Index

when there is more than one in a track.

Note Depending on a disc, this function may not work.

5. To make the screen disappear, press the INFO

button again.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-24

ENG-25

DVD AUDIO Playback

Clips Menu for MP3/WMA/JPEG/MPEG4

Folder Selection

MP3/WMA Playback

1. Open the disc tray.

REPEAT Play

Discs with MP3/WMA/JPEG/MPEG4 contain

individual songs, pictures or movies that can

be organized into folders as shown below.

They are similar to how you use your

The folder can only be selected in the Stop

mode.

1. Press the REPEAT button on the remote during

playback.

2. Place the disc on the tray.

- Place the disc with the labeled side up.

• To select the Parent Folder

2. Select Title (

LEFT/RIGHT button.

), Group (

) using the

computer to put files into different folders.

Press the RETURN button to go to parent folder,

or use the UP/DOWN buttons to select “..” and

press ENTER to go to the parent folder.

3. Close the tray.

- The tray closes and you should get a screen

that looks like the one below.

3. Press ENTER.

1. Open the disc tray.

2. Place the disc on the tray.

- Place the disc with the labeled side up.

• To select the Peer Folder

Use the LEFT/RIGHT buttons to highlight left

window. Use the UP/DOWN buttons to select the

desired folder, then press ENTER.

MP3/WMA Play Function

3. Close the tray.

- The tray closes and you should get a screen

that looks like the one below.

1. Select the desired folder.

2. Use the UP/DOWN or LEFT/RIGHT buttons to

select a song file.

• To select the Sub-Folder

O ff

Use the LEFT/RIGHT buttons to highlight right

window. Use the UP/DOWN buttons to select the

desired folder, then press ENTER.

3. Press ENTER to begin playback of the song file.

00:00:23

1_mp3

B e c a u s e Yo u

C a c t u s

AUDIO Format Display

Sad Day

Root

Wonderful

During DVD AUDIO playback, press the AUDIO

button to see AUDIO Format information.

WMA

JPEG

• LPCM : Linear Pulse Code Modulation.

Not compressed Audio data format.

• PPCM : Packet Pulse Code Modulation.

Lossless compressed Audio data format.

MP3

Parent Folder

Parent Folder, Current Folder Folders and Files in

and Peer Folders Current Folder

MUSIC

Current Folder

1st

•

: Name of currently playing file.

: Current Playback Time.

Sub-Folders

2nd

Repeat/Random playback

SONG FILE 1

SONG FILE 2

Press the REPEAT button to change playback

mode. There are 4 modes, such as Off, Track,

Folder and Random.

Peer Folders

: Current Playback Mode : There are 4

modes. They can be selected in order by

pressing the REPEAT button.

SONG FILE 3

MPEG4 FILES

- Off : Normal Playback

- Track : Repeats the current song file.

- Folder : Repeats the song files which have the

same extension in the current folder.

- Random : Song files which have the same

extension will be played in random

order.

- Off : Normal Playback

- Track : Repeats the current track.

- Folder : Repeats the current folder.

- Random : Files in the disc will be played

in random order.

Note

Some DVD-AUDIO discs don’t allow audio

down-mixing. These discs always output 5.1ch

analog audio regardless of audio setup.

Note When you play a MPEG4(AVI) file, refer

to page 28.

* To resume normal play, press the CLEAR button.

•

: MP3 file icon.

: WMA file icon.

: JPEG file icon.

•

: AVI file icon.

: Folder icon.

: Current Folder

icon.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-26

ENG-27

MP3/WMA Playback

MPEG4 Playback

1. Open the disc tray.

CD-R MP3/WMA discs

Using the Display Function

MPEG4 Function Description

When you record MP3 or WMA files on CD-R,

please refer to the following.

1. During play, press the INFO button on the remote.

2. Place the disc on the tray.

- Place the disc with the labeled side up.

Function

Description

Reference page

2. Use the UP/DOWN buttons to select the desired

item.

During play, press the

button, it moves forward

or backward 5 minutes.

Skip

• Your MP3 or WMA files should be ISO 9660 or JOLIET

format.

ISO 9660 format and Joliet MP3 or WMA files are

compatible with Microsoft's DOS and Windows, and with

Apple's Mac. This format is the most widely used.

3. Close the tray.

- The tray closes and you should get a screen

that looks like the one below.

(

)

3. Use the LEFT/RIGHT buttons to make the

desired setup and then press ENTER.

• You may use the number buttons of the remote

control to directly access a title or to start the

playback from the desired time.

During play, press the SERACH

(

) button and press

again to search at a faster

speed. Allows you to search

at a faster speed in an AVI

file. (2X, 4X, 8X)

MPEG4 Play Function

• When naming your MP3 or WMA files, do not exceed 8

characters, and enter “.mp3, .wma” as the file

extension.

General name format of: Title.mp3. or Title.wma.

When composing your title, make sure that you use 8

characters or less, have no spaces in the name, and avoid

the use of special characters including: (.,/,\,=,+).

4. To make the screen disappear, press the INFO

button again.

AVI files are used to contain the audio and video

data. Only AVI format files with the “.avi” extensions

can be played.

Allows you to search at a

slower speed in an AVI file.

(1/8X, 1/4X, 1/2X)

Slow Motion

Play

P 14

1. Select the desired folder. (See page 27 to select

the folder)

DivX

Each time the STEP button

is pressed, a new frame will

appear.

Step Motion

Play

Title

P 14

P 23

0:00:13

Time

MP3 1/8

Audio

• Use a decompression transfer rate of at least 128

Kbps when recording MP3 files.

2. Use the UP/DOWN or LEFT/RIGHT buttons to

select an avi file (DivX/XviD) and then press the

ENTER button.

2X/4X/2X/Normal in order

ZOOM

None

Subtitle

640x272

Size

Sound quality with MP3 files basically depends on the rate

of compression/decompression you choose. Getting CD

audio sound requires an analog/digital sampling rate, that

is conversion to MP3 format, of at least 128 Kbps and up

to 160 Kbps. However, choosing higher rates, like 192

Kbps or more, only rarely give better sound quality.

Conversely, files with decompression rates below 128

Kbps will not be played properly.

- These functions may not work depending on

MPEG4 file.

CD-R AVI file

This unit can play the following video compression

formats within the AVI file format:

- DivX 3.11 contents

- DivX 4 contents (Based on MPEG-4 Simple

Profile)

- DivX 5 contents (MPEG-4 simple profile plus

additional features such as bi-directional frames.

Qpel and GMC are also supported.)

- XviD MPEG-4 compliant Contents.

To access the desired title when there is

more than one in the disc.

Title

Time

Allows playback of the film from a

desired time. You must enter the starting

time as a reference.

• Use a decompression transfer rate of at least 64Kbps

when recording WMA files.

Sound quality with WMA files basically depends on the

rate of compression/decompression you choose.

Getting CD audio sound requires an analog/digital

sampling rate, that is conversion to WMA format, of at

least 64Kbps and up to 192Kbps.

To select the desired language of the

title soundtrack. The MP3, AC3 and

WMA are supported. You can use this

function using the AUDIO button.

(See page 20)

Audio

Repeat Playback

Conversely, files with decompression rates below 64Kbps

or over 192Kbps will not be played properly.

This unit supports all resolutions up to maximum below.

Press the REPEAT button to change playback

mode. There are 4 modes, such as Off, Folder, Title

and A-B (a distance between two points appointed

by user).

DivX3.11 & DivX4 & XviD

Bitrate may fluctuate:

Device may skip decoding 720 x 576 @25fps

the high bitrate portions

and begin decoding again

when Bitrate returns to

normal.

DivX5

•

Do not try recording copyright protected MP3 files.

Certain "secured" files are encrypted and code protected

to prevent illegal copying. These files are of the following

types: Windows Media^TM(registered trade mark of

Microsoft Inc) and SDMI^TM(registered trade mark of The

SDMI Foundation). You cannot copy such files.

You will be able to choose the subtitle

languages or, if you prefer, turn them off

from the screen. You can use this

function using the SUBTITLE button.

(See page 20)

720 x 480 @30fps

Subtitle

Size

: Maximum bitrate : 4Mbps

REPEAT ENTER

Off

01 A - B

File Size has a relationship with

resolution of a title. The larger file size

is, the higher resolution is displayed.

If the file resolution is small, it scales up

automatically. So you can see the larger

screen.

• Important: The above recommendations cannot be taken

as a guarantee that the DVD player will play MP3

Note

recordings, or as an assurance of sound quality. You

should note that certain technologies and methods for

MP3 file recording on CD-Rs prevent optimal playback of

these files on your DVD player (degraded sound quality

and in some cases, inability of the player to read the files).

• Folder (

) : repeats the AVI files which have the same

extension in the current folder.

• Some MPEG-4 files created on a personal

computer may not be play back. That is why Codec

Type, Version and Higher resolution over

specification is not supported.

• Title ( _T) : repeats the title that is playing.

• A-B : repeats a segment of the file that you select.

• This unit supports CD-R/RW written in MPEG4 in

accordance with the “ISO9660 format”.

• This unit can play a maximum of 3,000 files and 300

folders per disc.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-28

ENG-29

Picture CD Playback

Using the Setup Menu

Setting Up the Language Features

1. Select the desired folder. (See page 27 to select

the folder)

Note

The Setup menu lets you customize your DVD

player by allowing you to select various

language preferences, set up a parental level,

even adjust the player to the type of television

screen you have.

If you set the player menu, disc menu, audio

and subtitle language in advance, they will

come up automatically every time you watch a

movie.

• If no buttons on the remote control pressed for 10

seconds, the menu will disappear.

Press the INFO button on the remote control to

display the menu again.

• Press the STOP button to return to the clips menu.

• When playing a Kodak Picture CD, the unit

displays the Photo directly, not the clips menu.

2. Use the UP/DOWN buttons to select a Picture file in

clips menu and then press the ENTER button. You

should get a screen that looks like the one below.

Using the Player Menu Language

1. With the unit in Stop mode, press the MENU

button on the remote. Select Setup using

UP/DOWN buttons, then press the RIGHT or

ENTER button.

1. With the unit in Stop mode, press the MENU

button.

ENTER RETURN

2. Select Setup using UP/DOWN buttons, then

press the RIGHT or ENTER button.

CD-R JPEG Discs

• Only files with the ".jpg" and ".JPG" extensions can

be played.

Language Setup : Setup of the Language.

3. Select Language Setup using UP/DOWN

Audio Setup : Setup of the Audio Options.

buttons, then press the RIGHT or ENTER button.

• If the disc is not closed, it will take longer to start

playing and not all of the recorded files may be

played.

• Use the INFO button on the remote control to select

the menu you want to view and then press the ENTER

button.

Display Setup : Setup of the Display Options.

Use to select which type of screen you want to

watch and several display options.

• Only CD-R discs with JPEG files in ISO 9660 or Joliet

format can be played.

•

: Returns to the Album Screen.

Parental Setup : Setup of the Parental Level.

Allows users to set the level necessary to

prevent children from viewing unsuitable

movies such as those with violence, adult

subject matter, etc.

• The name of the JPEG file may not be longer than 8

characters and should contain no blank spaces or

special characters (. / = +).

• To see the next 6 pictures, press the

button.

• To see the previous 6 pictures, press the

• Only a consecutively written multisession disc can be

played. If there is a blank segment in the multisession

disc, the disc can be played only up to the blank

segment.

•

: Each time the ENTER button is pressed, the

picture rotates 90 degrees clockwise.

4. Select Player Menu using UP/DOWN buttons,

then press the RIGHT or ENTER button.

DivX(R) Registration : Please use the

Registration code to register this player with

the DivX(R) Video on Demand service.

This will allow you to rent and purchase videos

using the DivX(R) Video On Demand format.

To learn more go to www.divx.com/vod.

•

: Each time the ENTER button is pressed, the

picture is enlarged up to 4X.

• A maximum of 3000 images can be stored on a single

CD.

LANGUAGE SETUP

(Normal ➝ 2X ➝ 4X ➝ 2X ➝ Normal)

• Kodak Picture CDs are recommended.

•

: The unit enters slide show mode.

• When playing a Kodak Picture CD, only the JPEG

files in the pictures folder can be played.

*Before beginning the Slide Show, the picture interval

must be set.

• Kodak Picture CD : The JPEG files in the pictures

Disc Menu

Title Menu

folder can be played automatically.

5. Use the UP/DOWN buttons to select the desired

language.

ENTER RETURN

TIMER:

• Konica Picture CD : If you want to see the Picture,

select the JPEG files in the clips menu.

Function

Setup

• Fuji Picture CD : If you want to see the Picture, select

the JPEG files in the clips menu.

• QSS Picture CD : The unit cannot play QSS Picture

CD.

2. Use the UP/DOWN buttons on the remote to

access the different features.

•

: When this icon is selected and ENTER is

pressed, the pictures change automatically

with about a 6 second interval.

• If the number of files in 1 Disc is over 3000, only 3000

JPEG files can be played.

3. Press the ENTER or RIGHT button to access the

sub features.

• If the number of folders in 1 Disc is over 300, only

JPEG files in 300 folders can be played.

•

: The pictures change automatically with about

a 12 second interval.

To make the setup screen disappear after setting

up, press the MENU button again.

6. Press the ENTER button.

: The pictures change automatically with about

a 18 second interval.

- The language is selected and the screen returns to

Language Setup menu.

- To make the SETUP menu disappear, press the

RETURN or LEFT button.

Note

Depending on a file size, the amount of time between

each picture may be different from the manual.

Depending on a disc, some Setup Menu selections

may not work.

*If you don’t press any button, the slide show will start

automatically in about 10 seconds by default.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-30

ENG-31

Setting Up the Language Features

Setting Up the Audio Options

1. With the unit in Stop mode, press the MENU button.

Using the Disc Menu Language

Using the Audio Language

Using the Subtitle Language

This function changes the text language only on the

disc menu screens.

1. With the unit in Stop mode, press the MENU

button.

1. With the unit in Stop mode, press the MENU

button.

2. Select Setup using UP/DOWN buttons, then

press the RIGHT or ENTER button.

1. With the unit in Stop mode, press the MENU

button.

2. Select Setup using UP/DOWN buttons, then

press the RIGHT or ENTER button.

2. Select Setup using UP/DOWN buttons, then

press the RIGHT or ENTER button.

3. Select Audio Setup using UP/DOWN buttons,

then press the RIGHT or ENTER button.

2. Select Setup using UP/DOWN buttons, then

3. Select Language Setup using UP/DOWN

press the RIGHT or ENTER button.

buttons, then press the RIGHT or ENTER button.

3. Select Language Setup using UP/DOWN

4. Select Audio using UP/DOWN buttons, then

4. Select Subtitle using UP/DOWN buttons, then

buttons, then press the RIGHT or ENTER button.

press the RIGHT or ENTER button.

4. Select Disc Menu using UP/DOWN buttons, then

5. Use the UP/DOWN buttons to select the desired

press the RIGHT or ENTER button.

language.

- Select “Original” if you want the default soundtrack

language to be the original language the disc is

recorded in.

- Select “Automatic” if you want the subtitle language to

be the same as the language selected as the audio

preference.

5. Use the UP/DOWN buttons to select the desired

language.

4. Use the UP/DOWN buttons to select the desired

item. Then press the RIGHT or ENTER button.

- Select “Others” if the language you want is not listed.

Some discs may not contain the language you select

as your initial language; in that case the disc will use its

original language setting.

AUDIO SETUP

AUDIO LANGUAGE

Dolby/DTS Digital Out

PCM

MPEG-2 Digital Out

Dynamic Compression

PCM Down Sampling

Speaker Setup

PCM

Audio

SUBTITLE LANGUAGE

Automatic

Original

Others

Subtitle

Others

Dolby/DTS Digital Out

6. Press the ENTER button.

- The language is selected and the screen returns to

6. Press the ENTER button.

1. PCM : Converts to PCM(2CH) audio.

- The language is selected and the screen returns to

Language Setup menu.

2. Bitstream : Outputs Dolby Digital or DTS Bitstream via

digital output. Select Bitstream when connecting to a

Dolby digital and DTS Decoder.

Language Setup menu.

6. Press the ENTER button.

- The language is selected and the screen returns to

Language Setup menu.

Note There is no analog audio output when you play

DTS sound disc.

Note

MPEG-2 Digital Out

• If the selected language is not recorded on the

disc, the original pre-recorded language is

selected.

1. PCM : Converts to PCM(2CH) audio.

2. Bitstream : Outputs MPEG-2 Bitstream via digital

output. Select Bitstream when connecting to an

MPEG-2 Decoder.

• How to make the SETUP menu disappear or

return to menu screen during set up;

Press RETURN or LEFT button.

Dynamic Compression

1. On : To select dynamic compression.

2. Off : To select the standard range.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-32

ENG-33

Setting Up the Audio Options

Surround Sound Speaker Setup

Setting Up the Display Options

PCM Down Sampling

1. With the unit in Stop mode, press the MENU

button.

The default settings : FRONT L, R (Small), CENTER

(Small), SURROUND (Small).

Select the size of the speakers to be connected.

1. With the unit in Stop mode, press the MENU

button.

1. On : Select this when the amplifier connected to the

player is not 96KHz compatible. In this case, the

96KHz signals will be down converted to 48KHZ.

2. Select Setup using UP/DOWN buttons, then

press the RIGHT or ENTER button.

2. Select Setup using UP/DOWN buttons, then

press the RIGHT or ENTER button.

• Front (FL, FR)

- Large: Normally select this.

- Small: When the sound distorts or the surround

sound effects are difficult to hear, select this.

This activates the Dolby Digital bass redirection

circuitry and outputs the bass frequencies of the

speaker from the subwoofer.

2. Off : Select this when the amplifier connected to the

player is 96KHz compatible. In this case, all

signals will be output without any changes.

3. Select Audio Setup using UP/DOWN buttons,

then press the RIGHT or ENTER button.

3. Select Display Setup using UP/DOWN buttons,

then press the RIGHT or ENTER button.

Note Even when PCM Down sampling is Off

•

Some discs will only output down sampled

audio through the digital outputs.

•

High sampling rate DVD-Audio discs (192KHz

or 176.4KHz) always output audio down

sampled to 96KHz or 88.2KHz through the

digital outputs.

• Center

- None: If you do not connect a center speaker,

select this.

- Large: Normally select this.

- Small: When the sound distorts, select this.

This activates the Dolby Digital bass redirection

circuitry and outputs the bass frequencies of the

center speaker from other speakers.

•

When playing LPCM or PPCM DVD protected

by copyright. If digital audio source is

48KHz/16bit the Digital output is mute.

Speaker Setup (See pages 34~35)

4. Use the UP/DOWN buttons to select the desired

item. Then press the RIGHT or ENTER button.

4. Use the UP/DOWN buttons to select Speaker

Setup. Then press the RIGHT or ENTER button.

• Surround (SL, SR)

- None: If you do not connect a center speaker,

select this.

Note

AUDIO SETUP

• How to make the SETUP menu disappear or

return to menu screen during set up;

Press RETURN or LEFT button.

- Large (Rear/Side): Normally select either of these

according to the rear speaker’s position.

- Small (Rear/Side): When the sound distorts or the

surround sound effects are difficult to hear, select

either of these according to the rear speaker’s

position. This activates the Dolby Digital bass

redirection circuitry and outputs the bass

frequencies of the rear speaker from other

speakers.

Dolby/DTS Digital Out

MPEG-2 Digital Out

Dynamic Compression

PCM Down Sampling

Speaker Setup

PCM

• Manufactured under license from Dolby

Laboratories. “Dolby” and the double-D symbol are

trademarks of Dolby Laboratories.

HDMI/DVI

• “DTS” and “DTS Digital Out” are trademarks of

Digital Theater Systems, Inc.

• DVD-AUDIO

TV ASPECT

5. Use the UP/DOWN or LEFT/RIGHT buttons to

select the desired item. Then press the ENTER

button.

- Outputs 2 channel digital audio only.

- Some DVD-AUDIO discs do not downmix, so they

will not output 2 channel digital audio.

- MULTI channel DVD-AUDIO discs play back

through the analog outputs.

4:3 Letter Box

Setting up TEST

4:3 Pan Scan

The test output signals come clockwise starting from

the Front Speaker(L). Adjust Channel Balance to

match to the volume of test signals memorized in

the system.

16:9 Wide

SPEAKER SETUP

• Super Audio CD

- Outputs analog signals only.

FRONT(L) ➝➝CENTER ➝➝SUBWOOFER ➝

FRONT(R) ➝➝SURROUND(R) ➝➝SURROUND(L)

• HDMI

- If your TV is not compatible with compressed

multi-channel formats(Dolby Digital, DTS,

MPEG), you should set Digital Audio to PCM.

- If your TV is not compatible with LPCM sampling

rate over 48kHz, you should set PCM Down

Sampling to On.

- Super Audio CD audio is only available through

the analog outputs. It is not possible to output

Super Audio CD audio via the HDMI output or

Digital Audio Output.

Note

How to make the SETUP menu disappear or return

to menu screen during set up. Press RETURN or

LEFT button.

• The subwoofer test output signal is lower than the

other speakers.

• The MPEG Multichannel logo is a trademark

registered by PHILIPS Corporation.

• If you set Front (L, R) “Small”, LFE (Subwoofer) is

set “On” automatically.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-34

ENG-35

Setting Up the Display Options

Setting Up the Parental Control

Important Note

The Parental Control function works in conjunction

with DVDs that have been assigned a rating which

helps you control the types of DVDs that your family

watches. There are up to 8 rating levels on a disc.

TV Aspect

HDMI/DVI

Depending on the type of television you have, you may

want to adjust the screen setting (aspect ratio).

This setting is used when the unit is connected by HDMI

or DVI with Display devices (TV, projector, etc).

• In case of differ from your TV and TV system

setting value video output may be blocked.

1. 4:3 Letter Box : Select when you want to see the total

16:9 ratio screen DVD supplies, even though you have

a TV with a 4:3 ratio screen. Black bars will appear at

the top and bottom of the screen.

1. Resolution

- 480p/576p : 720 x 480, 720 x 576

- 720p : 1280 x 720

- 768p : 1024 x 768

- 1080i : 1920 x 1080

• You have to setup TV system correctly.

• Refer to your TV user's manual.

1. With the unit in Stop mode, press the MENU

button.

• If you use NTSC disc at PAL TV system, motion

picture may be distorted.

2. 4:3 Pan Scan : Select this for conventional size TVs

when you want to see the central portion of the 16:9

screen. (Extreme left and right side of movie picture

will be cut off.)

2. Select Setup using UP/DOWN buttons, then

press the RIGHT or ENTER button.

2. DVI Output

• If you use PAL disc at NTSC TV system, motion

picture may be distorted.

You can use this function to DVI output format.

• This function corrects a biased TV screen to secure

a normal view.

3. Select Parental Setup using UP/DOWN buttons,

then press the RIGHT or ENTER button.

3. 16:9 Wide :You can view the full 16:9 picture on your

widescreen TV.

• If DVI Output is set incorrectly, the screen can be

biased.

Video Output

Select Video Output.

Still Mode

These options will help prevent picture shake in still

mode and display small text clearer.

1. S-Video : Select when you want to use Video and

S-Video Out.

HDMI/DVI SETUP

1. Auto : When selecting Auto, Field/Frame mode will be

automatically converted.

Resolution

DVI Output

576p

2. Component (Iscan) : Select when you want to use

Video and Component 525i(Interlace) Out

Mode B

2. Field : Select this feature when the screen shakes in

the Auto mode.

3. Component (Pscan) & HDMI : Select when you want

to use Component 525p(Progressive) Out or HDMI.

3. Frame : Select this feature when you want to see

small letters more clearly in the Auto mode.

* If you press the VIDEO SEL. button, Video output

mode is changed in regular sequence in no disc

mode.

Screen Messages

(S-Video ➝➝Iscan ➝➝Pscan & HDMI ➝➝SCART RGB

➝➝SCART VIDEO)

Use to turn on-screen messages On or Off.

4. Use RIGHT or ENTER to select Yes if you want

to use a password. The Enter Password screen

appears.

Black Level

Adjusts the brightness of the screen.(On/Off)

Important Note

4. SCART Output : Select when you want to use Scart

Out.

• Consult your TV User’s Manual to find out if your

TV supports Progressive Scan. If Progressive

Scan is supported, follow the TV User’s Manual’s

instructions regarding Progressive Scan settings in

the TV’s menu system.

TV System

• RGB : Select when you want to use SCART RGB

PARENTAL SETUP

1. NTSC Disc : In case of using NTSC disc

• If your TV system only has PAL-Video input, you

must choose “PAL”. When you choose “PAL”,

Interlace output format is PAL 60 Hz output.

Out.

Use Password

• Video : Select when you want to use SCART

Video Out.

* If the Yes/No selection in the Display Setup sub Menu

is not made within 10 seconds, the screen returns to

the previous menu.

• If Video Output is set incorrectly, the screen can be

blocked. (See page 42)

• If your TV system only has NTSC, input you must

choose “NTSC Output”.

• The resolutions available for HDMI outputs depend

on the connected TV or projector. For details, see

the user’s manual of your TV or projector.

• If you set up the NTSC TV system, HDMI output

frame rate is 60 Hz.

2. PAL Disc : In case of using PAL disc

• If your TV system only has NTSC-Video input, you

must choose “NTSC Output”.

• When the resolution changes, the image may be

corrupted or the output may take longer than nor-

mal.

(Iscan)

5. Enter your password. The Re-enter Password

screen appears to confirm the password.

Enter your password again.

(Pscan) & HDMI

• If your TV system only has PAL input, you must

choose “PAL Output”.

The player is locked (

• If you set up the PAL TV system, HDMI output frame

rate is 50 Hz.

CREATE PASSWORD

Enter Password

0 ~ 9

HDMI/DVI

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-36

ENG-37

Setting Up the Parental Control

Controlling a TV with the Remote

The remote can also be set up to control most TVs. To program the remote, use the code that

corresponds to your brand.

5. Select Rating Level using UP/DOWN buttons,

and press ENTER or RIGHT button.

CREATE PASSWORD

TV Codes

Re-enter Password

BRAND

ANAM

AIWA

CODE

BRAND

NORDMENDE

NOKIA

CODE

10, 11, 12, 13, 14, 15, 16, 17, 18

72, 73

0 ~ 9

BANG&OLUFSEN

BLAUPUNKT

BRANDT

BRIONVEGA

CGE

PANASONIC

PHILPS

53, 54, 74, 75

06, 55, 56, 57

06, 56, 57

58, 59, 73, 74, 75

06, 56

45, 46

PHONOLA

PIONEER

RADIOLA

RADIOMARELLI

RCA

CONTINENTAL EDISON

6. Select the Rating Level you want using

UP/DOWN buttons.

19, 20, 23, 24, 25, 26, 27, 28, 29,

30 , 31, 32, 33, 34

DAEWOO

REX

For example, if you select up to Level 6, discs that

contain Level 7, 8 will not play.

- To cancel the Rating Level, select No using RIGHT or

EMERSON

FERGUSON

FINLUX

FORMENTI

FUJITSU

GRADIENTE

GRUNDIG

HITACHI

IMPERIAL

JVC

SABA

57, 72, 73, 74, 75

01, 02, 03, 04, 05, 06, 07, 08, 09

41, 42, 43, 44, 48

36, 37, 38, 39, 48

SALORA

SAMSUNG

SANYO

SCHNEIDER

SELECO

SHARP

SIEMENS

SINGER

SINUDYNE

SONY

06, 49, 57

49, 52, 71

60, 72, 73, 75

61, 79

ENTER in Use Password.

Setting Up the Rating Level

e.g) Setting up in LEVEL6.

1. With the unit in Stop mode, press the MENU

button.

RATING LEVEL

Level 8 Adult

Level 7

Level 6

Level 5

Level 4

Level 3

Level 2

Level 1 Kids Safe

2. Select Setup using UP/DOWN buttons, then

press the RIGHT or ENTER button.

The player is locked (

06, 19, 20, 21, 22, 78

35, 48

LOEWE

06, 69

06, 57

TELEAVA

TELEFUNKEN

THOMSON

LOEWE OPTA

MAGNAVOX

METZ

67, 73, 75, 76

72, 73, 75

About the Change Password

THOMSON ASIA 80, 81

MITSUBISHI

MIVAR

NEC

NEWSAN

NOBLEX

06, 48, 62, 65

52, 77

TOSHIBA

WEGA

YOKO

47, 48, 49, 50, 51, 52

- Highlight Change Password using UP/DOWN buttons.

- Press ENTER button.

The Change Password screen appears.

- Enter your new password. Enter the new password again.

ZENITH

3. Select Parental Setup using UP/DOWN buttons,

then press the RIGHT or ENTER button.

1. Turn on the TV.

4. If the TV turns off, setup is complete.

Enter other codes of the same brand if the first

code does not work.

Note

4. Enter your password.

The Parental Setup screen appears.

• How to make the SETUP menu disappear or

return to menu screen during set up;

Press RETURN or LEFT button.

2. Point the DVD’s remote at the TV.

3. While holding the TV POWER button down, enter

the code for your brand.

5. To operate the TV, use the “TV Function Buttons”

described on page 9.

PASSWORD CHECK

• If you have forgotten your password, see page 41.

Enter Password

Important Note

e.g) For Samsung 2 TVs

• The remote may not be able to control every

model TV of the brands listed.

• If you replace the remote control's batteries, set

the brand code again.

0 ~ 9

While holding down the TV POWER button,

enter 0 and then 1.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-38

ENG-39

Firmware upgrade

Troubleshooting

4. Press the ENTER button.

Firmware upgrade starts

Introduction

Before requesting service (troubleshooting), please check the following.

Samsung will often support the software upgrade to

improve the performance of this unit to the latest

status, through Samsung Internet Site

Action

Problem

Page

• Check the batteries in the remote. They may need replacing.

• Operate the remote control at a distance of no more than 20 feet.

• Remove batteries and hold down one or more buttons for several

minutes to drain the microprocessor inside the remote to reset it.

Reinstall batteries and try to operate the remote again.

No operations can be

performed with the remote.

(www.samsung.com).

Because the specially new mpeg4 codec continues

and it is appearing. What improvements are made

depends on the upgrade software you are using as

well as the software that your DVD-player contained

before the upgrade.

• Ensure that the disc is installed with the label side facing up.

• Check the region number of the DVD.

Disc does not play.

5.1 channel sound is not

being reproduced.

• 5.1 channel sound is reproduced only when the following conditions

are met. :

1) The DVD player is connected with the proper amplifier

2) The disc is recorded with 5.1 channel sound.

• Check whether the disc being played has the “Dolby 5.1 ch” mark

on the outside.

5. In the middle of the writing, the tray will open

automatically. After taking out the disc, please

wait for about 2 minutes.

How to make an upgrade disc

Write the downloaded file onto a blank CD-R or

CD-RW disc, using the following settings:

P10

P33

• Check if your audio system is connected and working properly.

• In a SETUP Menu, is the Audio Output set to Bitstream?

1. You have to download a new file through

Download Center of Samsung Internet Site

(www.samsung.com).

6. If the unit was successfully updated, the unit will

turn off and on after closing the tray automatically.

When the unit turns on, this screen will display.

• The features or action cannot be completed at this time because:

1. The DVD’s software restricts it.

2. The DVD’s software doesn’t support the feature (e.g., angles).

3. The feature is not available at the moment.

4. You’ve requested a title or chapter number or search time that is

out of range.

The

screen.

icon appears on

2. Write the file to Disc using CD-RW of your

computer.

P14

Note

Disc Menu doesn’t appear.

• Check if the disc has a Menu.

• File System CD-ROM ISO Level

• Character set ISO 9660

• Finalized, single session

• Write speed low

Play mode differs from the

Setup Menu selection.

• Some of the functions selected in the Setup Menu may not work

properly if the disc is not encoded with the corresponding function.

P31~38

The screen ratio cannot

be changed.

• The Screen Ratio is fixed on your DVDs.

P35~36

P33~35

7. Select the desired language.

• Make sure you have selected the correct Digital Output in the Audio

Options Menu.

Note • If the “Select Menu Language” doesn't

appear, please contact to “Samsung

Service Center”.

No audio.

Upgrade procedure

• Press power on from a cold start with no disc in the unit.

The screen is blocked

• Do not press any button and unplug

the power code during upgrade.

Press the SEARCH/SKIP (

second. The SELECT MENU LANGUAGE display will appear.

Select the number button of the desired language.

) button on the front panel for 5

1. Press OPEN/CLOSE button to open the disc tray.

2. Insert the upgrade CD-R disc, label facing up.

3. Press OPEN/CLOSE button to close the disc tray.

P35~36

P37~38

• The upgrade procedure may change,

refer to the web site

(www.samsung.com).

• Press power on from a cold start with no disc in the unit.

Press the SEARCH/SKIP (

Forgot password

Firmware upgrade appears on the display

) button on the front panel for 5

second. The SELECT MENU LANGUAGE display will appear.

Select the number button of the desired language. Press the MENU

button, and then press DOWN button to select Setup, then press

RIGHT or ENTER. Press Up or Down to select Parental Setup The

Parental Setup is now unlocked as indicated on the display.

You can change your password.

If you experience other

problems.

• Go to the contents and find the section of the instruction book that

contains the explanations regarding the current problem, and follow

the procedure once again.

• If the problem still cannot be solved, please contact your nearest

authorized service center.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-40

ENG-41

Troubleshooting

Specifications

Power Requirements

AC 230 V, 50 Hz

Power Consumption

Weight

14 W

Action

Problem

Page

2.3 Kg

General

Dimensions

430mm (W) X 250mm (D) X 49mm (H)

+5°C to +35°C

•

Check the Video output is HDMI enabled.

No HDMI output.

• Check the connection between the TV and the HDMI

jack of DVD player.

• See if the TV supports this 480p/576p/720p/768p/1080i DVD player.

Operating Temperature Range

Operating Humidity Range

P12~13

10 % to 75 %

Reading Speed : 3.49 ~ 4.06 m/sec.

Approx. Play Time

DVD

• If snow noise appears on the screen, it means

that TV does not support HDCP (High-bandwidth Digital Content

Protection).

Abnormal HDMI output

screen.

(DIGITAL VERSATILE DISC)

P13

P37

(Single Sided, Single Layer Disc) : 135 min.

CD : 12Cm

Reading Speed : 4.8 ~ 5.6 m/sec.

Maximum Play Time : 74 min.

(COMPACT DISC)

Disc

• Check your TV system setup correctly.

HDMI output Judder

Reading Speed : 4.8 ~ 5.6 m/sec.

Maximum Play Time : 20 min.

• The screen judder phenomenon may occur when frame rate is

converted from 50Hz to 60Hz for 720P/1080i DVI(Digital Visual

Interface) Output.

CD : 8Cm

(COMPACT DISC)

Reading Speed : 4.8 ~ 5.6 m/sec.

•

Refer to your TV users manual.

VCD : 12Cm

Maximum Play Time : 74 min. (Video + Audio)

1 channel : 1.0 Vp-p (75 Ω load)

Composite Video

R(Red) : 0.7 Vp-p (75 Ω load)

G(Green) : 0.7 Vp-p (75 Ω load)

B(Blue) : 0.7 Vp-p (75 Ω load)

Composite Video : 1.0 Vp-p (75 Ω load)

Luminance Signal : 1.0 Vp-p (75 Ω load)

Color Signal : 0.3 Vp-p (75 Ω load)

SCART Jack

Video

Output

Y : 1.0 Vp-p (75 Ω load)

Pr : 0.70 Vp-p (75 Ω load)

Pb : 0.70 Vp-p (75 Ω load)

Component Video

Luminance Signal : 1.0 Vp-p (75 Ω load)

Chrominance Signal : 0.3 Vp-p (75 Ω load)

S-VIDEO

HDMI

High Definition Multimedia Interface

2 Channel : L(1/L), R(2/R)

L(1/L), R(2/R)

SCART Jack

2 Channel

F/L, F/R, R/L, R/R, C/T, S/W

5.1 Channel

Audio

48 kHz Sampling : 4 Hz to 22 kHz

96 kHz Sampling : 4 Hz to 44 kHz

*Frequency Response

Output

*S/N Ratio

110 dB

100 dB

0.004 %

*Dynamic Range

*Total Harmonic Distortion

*: Nominal specification

• Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.

• Weight and dimensions are approximate.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-42

ENG-43

REPUBLIC OF

IRELAND

UNITED KINGDOM

This Samsung product is warranted for the period of twelve (12) months

from the original date of purchase, against defective materials and

workmanship. In the event that warranty service is required, you should

return the product to the retailer from whom it was purchased.

However, Samsung Authorised Dealers and Authorised Service Centers in

other EC Countries will comply with the warranty on the terms issued to

purchasers in the country concerned. In case of difficulty, details of our

Authorised Service Centers are available from:

5. This warranty covers none of the following:

a) Periodic check ups, maintenance and repair or replacement of parts

due to normal wear and tear.

b) Cost relating to transport, removal or installation of the product.

c) Misuse, including the faiure to use this product for its normal

purposes or incorrect installation.

d) Damage caused by Lightning, Water, Fire, Acts of God, War, Public

Disturbances, incorrect mains voltage, improper ventilation or any

other cause beyond the control of Samsung.

Samsung Electronics (U.K.) Ltd.,

Euro Service Centre, Stafford Park 12,

TELFORD, Shropshire TF3 3BJ,

6. This warranty is valid for any person who legally acquired possession of

the product during the warranty period.

Tel: 0870) 242 0303, Fax: 01952) 297617

➝ WARRANTY CONDITIONS

7. The consumers statutory rights in any applicable national legislation

whether against the retailer arising from the purchase contract or

otherwise are not affected by this warranty. Unless there is national

legislation to the contrary, the rights under this warranty are the

consumers sole rights and Samsung, its subsidiaries and distributors

shall not be liable for indirect or consequential loss or any damage to

records, compact discs, videos or audio taper or any other related

equipment or material.

1.The warranty is only valid if, when warranty service is required, the

warranty card is fully and properly completed and is presented with the

original invoice or sales slip or confirmation, and the serial number on the

product has not been defaced.

2. Samsung’s obligations are limited to the repair or, at its discretion,

replacement of the product or the defective part.

3. Warranty repairs must be carried out by Authorised Samsung Dealers or

Authorised Service Centers. No re-imbursement will be made for repairs

carried out by non Samsung Dealers and, any such repair work and

damage to the products caused by such repair work will not be covered

by this warranty.

SAMSUNG ELECTRONICS (U.K.) LTD.

4. This product is not considered to be defective in materials nor

workmanship by reason that it requires adaptation in order to conform to

national or local technical or safety standards in force in any Country

other than the one for which the product was originally designed and

manufactured. This warranty will not cover, and no re-imbursement will be

made for such adaptation nor any damage which may result.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG-44

ENG-45

Q Logic Network Card FC User Guide
Radica Games Games 75036 User Guide
Regency Stove U37 LP1 User Guide
Rhino Mounts Lawn Mower DB150 User Guide
Rockford Fosgate Stereo Amplifier T400 2 User Guide
Runco Home Theater System RS 900 Series RS1100 Series User Guide
Ryobi Chainsaw PNC3840 RY74005d, PCN4545 RY74007D User Guide
Samsung Camera Accessories TC 555G User Guide
Samsung Security Camera SBC 300AP User Guide
Sanyo Battery Charger UF 511 User Guide