Samsung Computer Monitor 2033SN User Guide

LCD Monitor  
User Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Instructions  
Ensure that the power plug is plugged into the power outlet firmly and  
correctly.  
Otherwise, this may result in fire.  
Do not forcefully bend or pull the power plug and do not place any  
heavy material on it.  
Otherwise, this may result in fire.  
Do not connect multiple appliances to the same power outlet.  
Otherwise, this may cause fire due to overheating.  
Do not disconnect the power cord while using the monitor.  
Otherwise, this may result in damage to the product due to electric  
shock.  
To disconnect the apparatus from the mains, the plug must be pulled  
out from the mains socket, therefore the mains plug shall be readily op-  
erable.  
This may cause electric shock or fire.  
Use only the power cord provided by our company. Do not use the  
provided power cord of another product.  
Otherwise, this may result in fire or electric shock.  
Installation  
Be sure to contact an authorized Service Center when installing your monitor in  
a location with heavy dust, high or low temperatures, high humidity, and exposed  
to chemical substances and where it operates for 24 hours such as at airports,  
train stations etc.  
Failure to do so may cause serious damage to your monitor.  
Do not drop the monitor when moving it.  
This may cause damage to the product or the person carrying it.  
When installing the product in a cabinet or rack, make sure that the  
front end of the bottom of the product does not project out.  
Otherwise, it may fall or cause personal injury.  
Use a cabinet or rack of a size appropriate to the product.  
DO NOT PLACE CANDLES,MOSQUITO REPELLANT,CIGA-  
RETTES AND ANY HEATING APPLIANCES NEAR THE PROD-  
UCT.  
Otherwise, this may cause fire.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Instructions  
Keep heating appliances as far away from the power cord or the prod-  
uct as possible.  
Otherwise, this may result in electric shock or fire.  
Do not install it in a badly ventilated location such as a bookcase or  
closet.  
Otherwise, this may result in fire due to an increase in the internal  
temperature.  
Put down the monitor carefully.  
Failing to do so may damage the monitor.  
Do not place the front of the product on the floor.  
Otherwise, this may result in damage to the screen display.  
Ensure that an authorized installation company installs the wall mount.  
Otherwise, it may fall and cause personal injury.  
Make sure to install the specified wall mount.  
Install your product in a well ventilated location. Ensure that there is  
a clearance of more than 10 cm from the wall.  
Otherwise, it may result in fire due to an increase in the internal tem-  
perature.  
Ensure that the packaging vinyl is kept away from children.  
Otherwise, it may result in serious harm (suffocation) if children play  
with it.  
If the height of your monitor is adjustable, do not place any object or  
part of your body on the stand when lowering it.  
This may cause damage to the product or the person carrying it.  
Clean  
When cleaning the monitor case or the surface of the TFT-LCD screen, wipe  
with a slightly moistened, soft fabric.  
Do not spray cleaner directly onto the surface of the product.  
Otherwise, this may result in the discoloration and distortion of the  
structure and the screen surface may peel off.  
Clean the product using a soft cloth with a monitor cleaner only. If  
you must use a cleaner other than the monitor cleaner, dilute it with water  
at a ratio of 1:10.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Instructions  
When cleaning the power plug pins or dusting the power outlet, clean  
it with a dry cloth.  
Otherwise, it may result in fire.  
When cleaning the product, make sure to disconnect the power cord.  
Otherwise, it may result in electric shock or fire.  
When cleaning the product, disconnect the power cord and clean it  
softly with a dry cloth.  
(Do not use chemicals such as wax, benzene, alcohol, thinner, mos-  
quito repellant, lubricant, or cleaner.) These may change the appear-  
ance of the product surface and peel off the indication labels on the  
product.  
Since the product housing is easily scratched, make sure to use the  
specified cloth only.  
Use the specified cloth adding only a little water. As the product may  
be scratched if there is any foreign material on the cloth, make sure  
to shake it thoroughly before using it.  
When cleaning the product, do not spray water directly onto the main  
body of the product.  
Ensure that water does not enter the product and that it is not wet.  
Otherwise, this may result in electric shock, fire or a malfunction.  
Others  
The product is a high voltage product. Ensure that users do not disas-  
semble, repair or modify the product themselves.  
Otherwise, this may result in electric shock or fire. If the product  
needs to be repaired, contact a Service Center.  
If there is a strange smell or a strange sound or smoke is coming from  
Otherwise, this may result in electric shock or fire.  
Do not place this product in a location exposed to moisture, dust,  
smoke, water, or in a car.  
Otherwise, this may result in electric shock or fire.  
When you drop the product or the case is broken, turn the power off  
and disconnect the power cord. Contact a Service Center.  
Otherwise, this may result in electric shock or fire.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Instructions  
If thunder or lightening is occurring, do not touch the power cord or  
antenna cable.  
Otherwise, this may result in electric shock or fire.  
Do not try to move the monitor by pulling only the wire or the signal  
cable.  
Otherwise, it may fall and result in electric shock, damage to the  
product or fire due to damage to the cable.  
Do not lift or move the product back and forwards or right and left  
while only holding the power cord or signal cables.  
Otherwise, it may fall and result in electric shock, damage to the  
product or fire due to damage to the cable.  
Make sure that the ventilating opening is not blocked by a table or  
curtain.  
Otherwise, it may result in fire due to an increase in the internal tem-  
perature.  
Do not place any containers containing water, vases, flowerpots, med-  
icines as well as any metal on the product.  
If water or a foreign material enters the product, disconnect the power  
cord and contact a Service Center.  
This may result in a product malfunction, electric shock, or fire.  
Do not use or keep combustible spray or flammable material near the  
product.  
Otherwise, this may result in an explosion or fire.  
Do not insert any metal, such as chopsticks, coins, pins and steel, or  
flammable objects, such as matches or paper, inside the product (through  
the ventilating openings, input and output terminals, etc).  
If water or foreign material enters the product, disconnect the power  
cord and contact a Service Center.  
Otherwise, this may result in electric shock or fire.  
When using a fixed screen for a long time, an afterimage or stain may  
occur.  
If you are not using your product for a long period of time, put it into  
sleep mode or use a moving screen saver.  
Otherwise, your eyesight may be damaged.  
Keep the volume at a comfortable level when using the headphones.  
Excessively loud volume level may damage hearing.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Instructions  
If you continually move closer to the product screen, your eyesight  
may be failing.  
To ease eye strain, take at least a five-minute break after every hour  
of using the monitor.  
Do not install it in an unstable location such as an unstable rack or  
uneven surface or a location exposed to vibrations.  
Otherwise, it may fall and cause personal injury and/or damage the  
product.  
If you use the product in a location exposed to vibrations, it may  
damage the product and result in fire.  
When moving the product, turn the power off and disconnect the power  
plug, antenna cable, and all the cables connected to the product.  
Otherwise, it may result in electric shock or fire.  
Ensure that children do not hang onto the product or climb up onto the  
product.  
The product may fall and cause personal injury or death.  
If you do not use the product for a long period of time, disconnect the  
power cord from the power outlet.  
Otherwise, this may result in overheating or fire due to dust, and may  
result in fire due to electric shock or leakage.  
Do not place any heavy items or toys or confectionery, such as cookies  
etc. that may attract the attention of children and to the product.  
Your children may hang onto the product causing it to fall and this  
may result in personal injury or death.  
Do not turn the product upside down or move it while holding only  
the stand.  
Otherwise, it may fall and result in personal injury and/or damage to  
the product.  
Do not place the product in a location exposed to direct sunlight or  
near any heat such as a fire or heater.  
This may reduce the lifetime of the product, and may result in fire.  
Do not drop any objects onto the product or cause any impact to the  
product.  
Otherwise, this may result in electric shock or fire.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Instructions  
Do not use a humidifier or kitchen table near the product.  
Otherwise, this may result in electric shock or fire.  
When there is a gas leak, do not touch the product or the power plug  
but ventilate immediately.  
If a spark occurs, it may cause an explosion or fire.  
If the product has been turned on for a long time, the display panel  
becomes hot. Do not touch it.  
Keep the small accessories in a location out of the reach of children.  
Be careful when adjusting the angle of the product or the height of the  
stand.  
This may result in personal injury as your hand or fingers may be-  
come caught.  
Also, if you tilt the product too far, it may fall and cause personal  
injury.  
Do not install the product in a location low enough for children to  
reach.  
Otherwise, it may fall and result in personal injury.  
Since the front part of the product is heavy, install the product on a  
level and stable surface.  
Do not put any heavy objects on the product.  
This may result in personal injury and/or damage to the product.  
Good Postures When Using the Monitor  
When using the product, use it in the correct position.  
Keep your back straight while looking at the product.  
The distance between your eyes and the screen should  
be between 45 to 50 cm. Look at the screen from a  
slightly higher location than the height of the screen.  
When using the product, use it in the correct position.  
Adjust the angle so that light is not reflected on the  
screen.  
Place your arms perpendicular to your sides and allow  
your arms to be level with the back of the hand.  
Keep your elbow at 90 degrees.  
Keep your knees at greater than 90 degrees, and keep  
your heels firmly on the floor. Keep your arms lower  
than your heart.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Package Contents  
Note  
Please make sure the following items are included with your monitor.  
If any items are missing, contact your dealer.  
Contact a local dealer to buy optional items.  
Unpacking  
Monitor  
Manuals  
Quick Setup Guide  
Warranty Card  
User's Guide  
(Not available in all loca-  
tions)  
Cables  
D-Sub Cable  
Power Cord  
DVI Cable (option)  
Others  
Cleaning Cloth(Option)  
Cable holding ring  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Note  
Cleaning Cloth is only provided for highly polished black products as a product feature.  
Your Monitor  
Initial Settings  
Select the language using the up or down key.  
The displayed content will disappear after 40 seconds.  
Turn the Power button off and on. It will be displayed again.  
It can be displayed up to three (3) times. Make sure to adjust the resolution of your PC before reaching  
the maximum count.  
Note  
The resolution displayed on the screen is the optimal resolution for this product.  
Adjust your PC resolution so that it is the same as the optimal resolution for this product.  
Front  
MENU button [MENU/  
]
Opens the on-screen menu and exits from the menu. Also use to exit the OSD menu  
or return to the previous menu.  
Brightness button [ ]  
When OSD is not on the screen, push the button to adjust brightness.  
Customized Key[  
]
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
You can customize key assignment for the Custom button according to your pref-  
erences.  
Note  
You can configure the customized key for a required function via Setup > Cus-  
Adjust buttons [  
]
These buttons allow you to adjust items in the menu.  
Enter button [  
]
Activates a highlighted menu item.  
Push the ' ', then selects the video signal while the OSD is off. (When the '  
'
button is pressed to change the input mode, a message appears in the upper left of  
the screen displaying the current mode -- analog or digital input signal.)  
Note  
If you select the digital mode, you must connect your monitor to the graphic  
card's DVI port using the DVI cable.  
This function is not available for products with an Analog interface only.  
AUTO button  
Usethis button for auto adjustment.  
(Available in Analog mode only)  
Power button [  
]
Use this button for turning the product on and off.  
Power Indicator  
This light is lit when operating normally, and blinks once when your adjustments  
are saved.  
Note  
See PowerSaver described in the manual for further information regarding power  
saving functions. For energy conservation, turn your monitor OFF when it is not  
needed or when leaving it unattended for long periods.  
Rear  
Note  
The configuration at the back of the monitor may vary from product to product.  
POWER port  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
POWER port  
Connect the power cord for your monitor to the  
POWER port on the back of the product.  
DVI IN  
DVI IN  
Connect the DVI Cable to the DVI IN port on the  
back of your monitor.  
Note  
Applicable to the digital (DVI)-dedicated models  
only.  
RGB IN  
RGB IN  
Connect the D-sub cable to the 15-pin, RGB IN  
port on the back of your monitor.  
Kensington Lock  
Kensington Lock  
The Kensington lock is a device used to physi-  
cally fix the system when using it in a public  
place. (The locking device has to be purchased  
separately.) For using a locking device, contact  
where you purchase it.  
Note  
The location of the Kensington Lock may be dif-  
ferent depending on its model.  
Using the Anti-Theft Kensington Lock  
1. Insert the locking device into the Kensington  
slot on the Monitor  
locking direction  
and turn it in the  
.
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
2. Connect the Kensington Lock cable.  
3. Fix the Kensington Lock to a desk or a heavy  
stationary object.  
Note  
See Connecting Cables for further information regarding cable connections.  
Cable holding ring  
Fix the cables using the holding ring, as shown in the figure.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Connecting Cables  
Use a connection appropriate for your computer.  
Using the D-sub (Analog) connector on the video card.  
Connect the signal cable to the 15-pin, D-sub port on the back of your monitor.  
Using the DVI (Digital) connector on the video card.  
Connect the DVI Cable to the DVI IN Port on the back of your Monitor.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Connect the power cord for your monitor to the power port on the back of the monitor.  
Plug the power cord for the monitor into a nearby outlet.  
Note  
If the monitor and the computer are connected, you can turn them on and use them.  
Using the Stand  
Folding the base  
Note  
You can tilt the monitor upwards at an angle of -1° to 16°. ( ±1.0°)  
Attaching a Base  
This monitor accepts a 100 mm x 100 mm VESA-compliant mounting interface pad.  
Note  
The VESA dimensions given above are an example. The VESA dimensions may differ depending on  
the product.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
A. Monitor  
B. Mounting interface pad (Sold separately)  
1. Turn off your monitor and unplug its power cord.  
2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen.  
3. Remove the stand from the LCD monitor.  
4. Align the mounting interface pad with the holes in the rear cover mounting pad and secure it with  
four screws that came with the arm-type base, wall mount hanger or other base.  
Do not use screws longer than the standard dimension, as they may damage the  
inside of the Monitor.  
For wall mounts that do not comply with VESA standard screw specifications,  
the length of the screws may differ depending on their specifications.  
Do not use screws that do not comply with the VESA standard screw specifica-  
tions.  
Do not fasten the screws too tightly, as this may damage the product or cause the  
product to fall, leading to personal injury.  
Samsung is not liable for these kinds of accidents.  
Samsung is not liable for product damage or personal injury when a non-VESA  
or non-specified wall mount is used or the consumer fails to follow the product  
installation instructions.  
To mount the monitor on a wall, you should purchase the wall mounting kit that  
allows you to mount the monitor at least 10 cm away from the wall surface.  
Electronics will not be responsible for damages caused by using a base other than  
those specified.  
Please use Wall Mount according to the International standards.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Software  
Monitor Driver  
Note  
When prompted by the operating system for the monitor driver, insert the CD-ROM  
included with this monitor. Driver installation is slightly different from one operating  
system to another. Follow the directions appropriate for the operating system you  
have.  
Prepare a blank disk and download the driver program file at the Internet web site  
shown here.  
Internet web site :  
Installing the Monitor Driver (Automatic)  
1. Insert CD into the CD-ROM drive.  
3. Choose your monitor model in the model list, then click the "OK" button.  
4. If you can see following message window, then click the "Continue Anyway" button. Then click  
"OK" button (Microsoft® Windows® XP/2000 Operating System).  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Software  
Note  
This monitor driver is under certifying MS logo, and this installation doesn't damage your system.  
The certified driver will be posted on Samsung Monitor homepage.  
Installing the Monitor Driver (Manual)  
Microsoft® Windows Vista™‚ Operating System  
1. Insert your Manual CD into your CD-ROM drive.  
2.  
Click  
(Start) and "Control Panel". Then, double-click on "Appearance and Personalization".  
3. Click "Personalization" and then "Display Settings".  
4. Click "Advanced Settings...".  
5. Click "Properties" in the "Monitor" tab. If the "Properties" button is deactivated, it means the  
configuration for your monitor is completed. The monitor can be used as is.  
If the message "Windows needs..." is displayed, as shown in the figure below, click "Continue".  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Software  
Note  
This monitor driver is under certifying MS logo, and this installation doesn't damage your system.  
The certified driver will be posted on Samsung Monitor homepage.  
6. Click "Update Driver..." in the "Driver" tab.  
7. Check the "Browse my computer for driver software" checkbox and click "Let me pick from a  
list of device drivers on my computer".  
8. Click "Have Disk...” and select the folder (for example, D:\Drive) where the driver setup file is  
located, and click "OK".  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Software  
9. Select the model that matches your monitor from the list of monitor models on the screen, and  
click "Next".  
10. Click "Close" "Close" "OK" "OK" on the following screens displayed in sequence.  
Microsoft® Windows® XP Operating System  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Software  
1. Insert CD into the CD-ROM drive.  
2. Click "Start" "Control Panel" then click the "Appearance and Themes" icon.  
3. Click "Display" icon and choose the "Settings" tab then click "Advanced...".  
4. Click the "Properties" button on the "Monitor" tab and select "Driver" tab.  
5. Click "Update Driver..." and select "Install from a list or..." then click "Next" button.  
6. Select "Don't search, I will..." then click "Next" and then click "Have disk".  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Software  
7. Click the "Browse" button then choose A:(D:\Driver) and choose your monitor model in the model  
list and click the "Next" button.  
8. If you can see following message window, then click the "Continue Anyway" button. Then click  
"OK" button.  
Note  
This monitor driver is under certifying MS logo, and this installation doesn't damage your system.  
The certified driver will be posted on Samsung Monitor homepage.  
9. Click the "Close" button then click "OK" button continually.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Software  
10. Monitor driver installation is completed.  
Microsoft® Windows® 2000 Operating System  
When you can see "Digital Signature Not Found" on your monitor, follow these steps.  
1. Choose "OK" button on the "Insert disk" window.  
2. Click the "Browse" button on the "File Needed" window.  
3. Choose A:(D:\Driver) then click the "Open" button and then click "OK" button.  
How to install  
1. Click "Start", "Setting", "Control Panel".  
2. Double click the "Display" icon.  
3. Select the "Settings" tab and click "Advanced Properties" button.  
4. Choose "Monitor".  
Case1 : If the "Properties" button is inactive, it means your monitor is properly configured. Please  
stop installation  
Case2 : If the "Properties" button is active, click the "Properties" button then follow next steps  
continually.  
5. Click "Driver" and then click on "Update Driver..." then click on the "Next" button.  
6. Choose "Display a list of the known drivers for this device so that I can choose a specific driver"  
then click "Next" and then click "Have disk".  
7. Click the "Browse" button then choose A:(D:\Driver).  
8. Click the "Open" button, then click "OK" button.  
9. Choose your monitor model and click the "Next" button then click "Next" button.  
10. Click the "Finish" button then the "Close" button.  
If you can see the "Digital Signature Not Found" window then click the "Yes" button. And click  
the "Finish" button then the "Close" button.  
Microsoft® Windows® Millennium Operating System  
1. Click "Start", "Setting", "Control Panel".  
2. Double click the "Display" icon.  
3. Select the "Settings" tab and click "Advanced Properties" button.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Software  
4. Select the "Monitor" tab.  
5. Click the "Change" button in the "Monitor Type" area.  
6. Choose "Specify the location of the driver".  
7. Choose "Display a list of all the driver in a specific location..." then click "Next" button.  
8. Click the "Have Disk" button.  
9. Specify A:\(D:\driver) then click "OK" button.  
10. Select "Show all devices" and choose the monitor that corresponds to the one you connected to  
your computer and click "OK".  
11. Continue choosing "Close" button and "OK" button until you close the Display Properties dia-  
logue box.  
Microsoft® Windows® NT Operating System  
1. Click "Start", "Settings", "Control Panel", and then double-click "Display" icon.  
2. In Display Registration Information window, click Settings Tab and then click "All Display  
Modes".  
3. Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency) and  
then click "OK".  
4. Click "Apply" button if you see the screen working normally after clicking "Test". If the screen  
is not normal, change to a different mode (lower mode of resolution, colors or frequency).  
Note  
If there is no Mode at All Display Modes, select the level of resolution and vertical frequency by  
referring to the Preset Timing Modes in the user guide.  
Linux Operating System  
To execute X-Window, you need to make the X86Config file, which is a type of system setting file.  
1. Press "Enter" at the first and the second screen after executing the X86Config file.  
2. The third screen is for setting your mouse.  
3. Set a mouse for your computer.  
4. The next screen is for selecting a keyboard.  
5. Set a Keyboard for your computer.  
6. The next screen is for setting your monitor.  
7. First of all, set a horizontal frequency for your monitor. (You can enter the frequency directly.)  
8. Set a vertical frequency for your monitor. (You can enter the frequency directly.)  
9. Enter the model name of your monitor. This information will not affect the actual execution of  
X-Window.  
10. You have finished setting up your monitor. Execute X-Window after setting other requested  
hardware.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Software  
Natural Color  
Natural Color Software Program  
One of the recent problems in using a computer is that the color of the images printed out by a printer  
or other images scanned by a scanner or a digital camera are not the same as those shown on the monitor.  
The Natural Color S/W is the very solution for this problem. It is a color administration system de-  
veloped by Samsung Electronics in association with Korea Electronics & Telecommunications  
Research Institute (ETRI). This system is available only for Samsung monitors and makes the color  
of the images on the monitor the same as the printed or scanned images. For more information, refer  
to Help (F1) in the software program.  
The Natural Color is provided online. You can download it from the website below and install;  
MagicTune™  
Installation  
1. Insert the installation CD into the CD-ROM drive.  
2. Click the MagicTune™ installation file.  
Note  
If the popup window to install the software for the main screen is not displayed, proceed with the  
installation using the MagicTune executable file on the CD.  
3. Select installation Language, Click "Next".  
4. When the Installation Shield Wizard window appears, click "Next".  
5. Select "I agree to the terms of the license agreement" to accept the terms of use.  
6. Choose a folder to install the MagicTune™ program.  
7. Click "Install".  
8. The "Installation Status" window appears.  
9. Click "Finish".  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Software  
10. When the installation is complete, the MagicTune™ executable icon appears on your desktop.  
Double-click the icon to start the program.  
MagicTune™ execution icon may not appear depending on specification of computer sys-  
tem or monitor. If that happens, press F5 Key.  
Installation Problems  
The installation of MagicTune™ can be affected by such factors as the video card, motherboard and  
the network environment.  
System Requirements  
OS  
Windows 2000  
Windows XP Home Edition  
Windows XP Professional  
Windows Vista™  
It is recommended using MagicTune™ in Windows® 2000 or later.  
Hardware  
32 MB Memory above  
60 MB Hard disk space above  
For more information, visit the MagicTune™ website.  
Uninstall  
The MagicTune™ program can be removed only by using the "Add or Remove Programs" option of  
the Windows® Control Panel.  
Perform the following steps remove MagicTune™.  
1. Go to [Task Tray] [Start] [Settings] and select [Control Panel] in the menu. If the program  
runs on Windows® XP, go to [Control Panel] in the [Start] menu.  
2. Click the "Add or Remove Programs" icon in Control Panel.  
3. In the "Add or Remove Programs" screen, scroll down to find "MagicTune™." Click on it to  
highlight it.  
4. Click the "Change/Remove" button to remove the program.  
5. Click "Yes" to begin the uninstall process.  
6. Wait until the "Uninstall Complete" dialog box appears.  
Note  
Visit the MagicTune™ website for technical support for MagicTune™, FAQs (questions and answers)  
and software upgrades.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Software  
MultiScreen  
Note  
The software may not be supported depending on the model.  
Installation  
1. Insert the installation CD into the CD-ROM drive.  
2. Click the MultiScreen installation file.  
Note  
If the popup window to install the software for the main screen is not displayed, proceed with the  
installation using the MultiScreen executable file on the CD.  
3. When the Installation Shield Wizard window appears, click "Next".  
4. Select "I agree to the terms of the license agreement" to accept the terms of use.  
5. Choose a folder to install the MultiScreen‚ program.  
6. Click "Install".  
7. The "Installation Status" window appears.  
8. Click "Finish".  
9. When the installation is complete, the Multiscreen executable icon appears on your desktop.  
Double-click the icon to start the program.  
Multiscreen execution icon may not appear depending on specification of computer system  
or monitor. If that happens, press F5 Key.  
Installation Problems  
The installation of MultiScreen can be affected by such factors as the video card, motherboard and the  
network environment.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Software  
System Requirements  
OS  
Windows 2000  
Windows XP Home Edition  
Windows XP Professional  
Windows Vista™  
It is recommended using MultiScreen in Windows® 2000 or later.  
Hardware  
32 MB Memory above  
60 MB Hard disk space above  
Uninstall  
The Multiscreen program can be removed only by using the "Add or Remove Programs" option of the  
Windows® Control Panel.  
Perform the following steps remove Multiscreen.  
Select "Setting/Control Panel" on the "Start" menu and then double-click "Add/Delete a program".  
Select Multiscreen from the list and then click the "Add/Delete" button.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the Monitor  
Direct Functions  
AUTO  
When the 'AUTO' button is pressed, the auto adjustment screen appears as shown in the animated  
screen on the center.  
Auto adjustment allows the monitor to self-adjust to the incoming Analog signal. The values of Fine,  
Coarse and Position are adjusted automatically.  
(Available in Analog mode only, so “AUTO” icon of OSD is gray in Digital mode.)  
If auto adjustment does not work properly, press 'AUTO' button again to adjust picture with more  
accuracy.  
If you change resolution in the control panel, auto function will be executed automatically.  
OSD Lock & Unlock  
This is the function that locks the OSD in order to keep the current states of settings or prevent others  
from adjusting the current settings.  
Lock : Hold down the MENU button for more than five (5) seconds to activate the OSD adjustment  
lock function.  
Unlock : Hold down the MENU button for more than five (5) seconds to deactivate the OSD adjustment  
lock function.  
When pressing the AUTO button after locking the OSD  
When pressing the MENU button after locking the OSD  
Note  
Though the OSD adjustment lock  
function is activated, you can still  
adjust the brightness and contrast,  
and adjust Customized Key  
(
) using the Direct button.  
Customized key  
You can customize key assignment for the Custom button according to your preferences.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the Monitor  
To view the operating screen displayed when pressing the [  
tomized key for a function, click the name of each function.  
] button after configuring the cus-  
Note  
You can configure the customized  
key for a required function via  
Setup > Customized Key.  
ImageSize Supplied for the  
wide models only such as 16:9 or  
16:10.  
Brightness  
When OSD is not on the screen, push the Brightness (  
) button to adjust brightness.  
SOURCE  
Selects the video signal while the OSD is off.  
Note  
Not applicable to analogue  
(D-SUB)-or-digital (DVI)-  
dedicated models.  
OSD Function  
Top Menus  
Sub Menus  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the Monitor  
Picture  
Menu  
Description  
Brightness  
(Not available in MagicBright mode of Dynamic Contrast.)  
You can use the on-screen menus to change the brightness according  
to personal preference.  
The larger the number, the brighter the screen. The smaller the number,  
the darker the screen.  
Contrast  
(Not available in MagicBright mode of Dynamic Contrast.)  
You can use the on-screen menus to change the contrast according to  
personal preference.  
The larger the number, the brighter the screen. The smaller the number,  
the darker the screen.  
( Not available in MagicColor mode of Full and Intelligent. )  
Sharpness  
Changes the clearance of image.  
The larger the number, the clearer the screen. The smaller the number,  
the less clear the screen.  
( Not available in MagicColor mode of Full and Intelligent. )  
MagicBright  
Push the  
button to circle through available preconfigured modes.  
MagicBright is a new feature providing optimum viewing environment  
depending on the contents of the image you are watching. Currently  
seven different modes are available: Custom, Text, Internet, Game,  
Sport, Movie and Dynamic Contrast. Each mode has its own pre-  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the Monitor  
Menu  
Description  
configured brightness value. You can easily select one of seven settings  
by simply pressing Customized Key control button.  
Custom  
Although the values are carefully chosen by our engineers, the pre-  
configured values may not be comfortable to your eyes depending  
on your taste.  
If this is the case, adjust the brightness and contrast by using the  
OSD menu.  
Text  
For documentations or works involving heavy text.  
Internet  
For working with a mixture of images such as texts and graphics.  
Game  
For watching motion pictures such as a game.  
Sport  
For watching motion pictures such as a sport.  
Movie  
For watching motion pictures such as a DVD or Video CD.  
Dynamic Contrast  
Dynamic Contrast is to automatically detect distribution of input-  
ted visual signal and adjust to create optimum contrast.  
Coarse  
Removes noise such as vertical stripes.  
The larger the number, the more the screen increases vertically. The  
smaller the number, the more the screen decreases vertically.  
Coarse adjustment may move the screen image area. You may relocate  
it to the center using the horizontal control menu.  
(Available in Analog mode only)  
Fine  
Removes noise such as horizontal stripes.  
If the noise persists even after Fine tuning, repeat it after adjusting the  
frequency (clock speed).  
(Available in Analog mode only)  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the Monitor  
Color  
Menu  
Description  
MagicColor  
MagicColor is a new technology that Samsung has exclusively devel-  
oped to improve digital image and to display natural color more clearly  
without disturbing image quality.  
Off - Returns to the original mode.  
Demo - The screen before applying MagicColor appears on the  
right and the screen after applying MagicColor appears on the left.  
Full - Displays not only vivid natural color but also more realistic  
natural skin color with clearness.  
Intelligent - Displays vivid natural color with clearness.  
Red  
Adjusts individual Red color balance.  
The larger the number, the closer it is to red.  
( Not available in MagicColor mode of Full and Intelligent. )  
Green  
Blue  
Adjusts individual Green color balance.  
The larger the number, the closer it is to green.  
( Not available in MagicColor mode of Full and Intelligent. )  
Adjusts individual Blue color balance.  
The larger the number, the closer it is to blue.  
( Not available in MagicColor mode of Full and Intelligent. )  
Color Tone  
The tone of the color can be changed and one of four modes can be  
selected.  
( Not available in MagicColor mode of Full and Intelligent. )  
Cool - Makes whites bluish.  
Normal - Keeps whites white.  
Warm - Makes whites reddish.  
Custom - Select this mode when you want to adjust the image ac-  
cording to your preferences.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the Monitor  
Menu  
Description  
Color Effect  
You can change the overall mood by changing the screen colors.  
( Not available in MagicColor mode of Full and Intelligent. )  
Off - This applies an achromatic color to the screen to adjust the  
screen effects.  
Grayscale - The default colors of black and white are displayed.  
Green - This applies the green color effect to a black and white  
screen.  
Aqua - This applies the aqua color effect to a black and white  
screen.  
Sepia - This applies the Sepia color effect to a black and white  
screen.  
Gamma  
Gamma correction changes the luminance of the colors with inter-  
mediate luminance.  
Mode 1 : Sets the screen to the default brightness.  
Mode 2 : Sets the screen to bright.  
Mode 3 : Sets the screen to dim.  
SIZE & POSITION  
Menu  
Description  
H-Position  
Changes the horizontal position of the monitor's entire display.  
You can move the position of the screen to the left and right by pressing  
the and buttons, respectively.  
(Available in Analog mode only)  
Note  
When TV signal is input in AV mode ,select “Screen Fit “to adjust  
horizontal position in 0-6 levels.  
V-Position  
Changes the vertical position of the monitor's entire display.  
You can move the position of the screen downwards and upwards by  
pressing the and buttons, respectively.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the Monitor  
Menu  
Description  
(Available in Analog mode only)  
Note  
When TV signal is input in AV mode ,select “Screen Fit “to adjust  
vertical position in 0-6 levels.  
Image Size  
Note  
Supplied for the wide models only such as 16:9 or 16:10.  
You can change the size of the screen displayed on your monitor.  
PC signals  
Auto - The screen is displayed in accordance with the screen aspect  
ratio of the input signals.  
Wide - A full screen is displayed regardless of the screen aspect  
ratio of the input signals.  
Note  
Signals not available in the standard mode table are not supported.  
If the wide screen which is the optimal resolution for the monitor  
is set on your PC, this function is not performed.  
AV signals  
4 : 3 - Sets the picture to 4:3 normal mode.  
16 : 9- Sets the picture to 16:9 wide mode.  
Screen Fit- Use the function to see the full image without any cutoff  
when DVI (480p/576p/720p/1080i/1080p) signals are input.  
Note  
It can only be selected if an external input is connected to the DVI  
terminal and the 'PC/AV Mode' is set to 'AV'.  
4 : 3 - Sets the picture to 4:3 normal mode.  
Wide-Sets the picture to 16:10 wide mode.  
Screen Fit- Use the function to see the full image without any cutoff  
when DVI (480p/576p/720p/1080i/1080p) signals are input.  
Note  
It can only be selected if an external input is connected to the DVI  
terminal and the 'PC/AV Mode' is set to 'AV'.  
When the panel is of 16:10,the screen size options include  
“4:3”,”wide “,”Screen fit“.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the Monitor  
SETUP&RESET  
Menu  
Description  
Reverts the product settings to factory defaults.  
Reset  
Yes  
No  
Menu Transpar- Change the transparency of the background of the OSD.  
ency  
Off : The menus are displayed in the normal way (non-transpar-  
ently).  
On : The menus are displayed transparently.  
Language  
You can select the language used to display the menus.  
You can choose one of nine languages.  
Note  
The language chosen affects only the language of the OSD. It has no  
effect on any software running on the computer.  
Off Timer On/ You can enable or disable the Off Time function.  
Off  
Off  
On  
Off Timer Setting The monitors will turn off automatically at the specified time.  
Auto Source  
Select Auto Source for the monitor to automatically select the signal  
source.  
Auto  
Manual  
Note  
Not applicable to analogue (D-SUB)-or-digital (DVI)-dedicated mod-  
els.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the Monitor  
Menu  
Description  
PC/AV Mode  
This function allows the screen to be displayed at the optimal quality  
in accordance with the size of the screen when a 480P, 576P, 720P,  
1080i, or 1080P video signal is input in DVI mode.  
Set to "PC" when connected to a PC, Set to "AV" when connected to  
an AV device.  
If not set to "AV", the screen may not be displayed normally.  
(Unavailable in Analog mode)  
Note  
Supplied for the wide models only such as 16:9 or 16:10.  
Display Time  
The menu will be automatically turned off if no adjustments are made  
for a certain time period.  
You can set the amount of time the menu will wait before it is turned  
off.  
5 sec  
10 sec  
20 sec  
200 sec  
Customized Key You can specify a function which will be activated when the Custom-  
ized Key (  
)is pressed.  
INFORMATION  
Menu  
Description  
INFORMA-  
TION  
Shows a video source, display mode on the OSD screen.  
Note  
For models with an Analog interface only, “Analog/Digital“is not  
shown in the”Information”.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Self-Test Feature Check  
Note  
Your monitor provides a self test feature that allows you to check whether your monitor is functioning  
properly.  
Self-Test Feature Check  
1. Turn off both your computer and the monitor.  
2. Unplug the video cable from the back of the computer.  
3. Turn on the monitor.  
If the monitor is functioning properly, you will see a box in the illustration below.  
Note  
For models with an Analog interface only, “Analog/Digital” is not shown in the Warning Message  
OSD.  
This box appears during normal operation if the video cable becomes disconnected or damaged.  
4. Turn off your monitor and reconnect the video cable; then turn on both your computer and the  
monitor.  
If your monitor screen remains blank after using the previous procedure, check your video controller  
and computer system; your monitor is functioning properly.  
Warning Messages  
If there is something wrong with the input signal, a message appears on the screen or the screen goes  
blank although the power indicator LED is still on. The message may indicate that the monitor is out  
of scan range or that you need to check the signal cable.  
Note  
For models with an Analog interface only, “Analog/Digita” is not shown in the Warning Message  
OSD.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Environment  
The location and the position of the monitor may influence the quality and other features of the monitor.  
If there are any sub woofer speakers near the monitor, unplug and relocate the woofer to another room.  
Remove all electronic devices such as radios, fans, clocks and telephones that are within 3 feet (one  
meter) of the monitor.  
Useful Tips  
A monitor recreates visual signals received from the computer. Therefore, if there is a problem with  
the computer or the video card, this can cause the monitor to become blank, have poor coloring, become  
noisy, and video mode not supported, etc. In this case, first check the source of the problem, and then  
contact the Service Center or your dealer.  
Judging the monitor's working condition  
If there is no image on the screen or a "Not Optimum Mode", "Recommended Mode **** x ****  
60 Hz" message comes up, disconnect the cable from the computer while the monitor is still powered  
on.  
If there is a message coming up on the screen or if the screen goes white, this means the monitor is in  
working condition.  
In this case, check the computer for trouble.  
Check List  
Note  
Before calling for assistance, check the information in this section to see if you can remedy any prob-  
lems yourself. If you do need assistance, please call the phone number on the Information section or  
No images on the screen. I cannot turn on the monitor.  
Q:  
A:  
Q:  
A:  
Is the power cord connected properly?  
Check the power cord connection and supply.  
Can you see "Check Signal Cable" on the screen?  
(Connected using the D-sub cable)  
Check the signal cable connection.  
(Connected using the DVI cable)  
If you still see an error message on the screen when the monitor is connected properly, check to  
see if the monitor status is set to analog.  
If you still see an (error) message on the screen when the monitor is connected properly, check  
to see if the monitor status is set to analog. Press ‘ ’ button to have the monitor double-check  
the input signal source.  
Q:  
A:  
If the power is on, reboot the computer to see the initial screen (the login screen), which can be  
seen.  
If the initial screen (the login screen) appears, boot the computer in the applicable mode (the  
safe mode for Windows ME/XP/2000) and then change the frequency of the video card.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
If the initial screen (the login screen) does not appear, contact the Service Center or your deal-  
Q:  
A:  
Can you see "Not Optimum Mode", "Recommended Mode **** x **** 60 Hz" on the screen?  
You can see this message when the signal from the video card exceeds the maximum resolution  
and frequency that the monitor can handle properly.  
A:  
A:  
Adjust the maximum resolution and frequency that the monitor can handle properly.  
If the display exceeds SXGA or 75 Hz, a "Not Optimum Mode", "Recommended Mode ****  
x **** 60 Hz" message is displayed. If the display exceeds 85 Hz, the display will work properly  
but the "Not Optimum Mode", "Recommended Mode **** x **** 60 Hz" message appears  
for one minute and then disappears.  
Please change to the recommended mode during this one-minute period.  
(The message is displayed again if the system is rebooted.)  
Q:  
There is no image on the screen. Is the power indicator on the monitor blinking at 1 second  
intervals?  
A:  
A:  
A:  
The monitor is in PowerSaver mode.  
Press a key on the keyboard to activate the monitor and restore the image on the screen.  
If there is still no image, press the ' ' button. Then press any key on the keyboard again to  
activate the monitor and restore the image on the screen.  
Q:  
A:  
Connected using the DVI cable?  
You may get a blank screen if you boot the system before you connect the DVI cable, or dis-  
connect and then reconnect the DVI cable while the system is running as certain types of graphic  
cards do not send out video signals. Connect the DVI cable and then reboot the system.  
I cannot see the On Screen Display.  
Q:  
A:  
Have you locked the On Screen Display (OSD) Menu to prevent changes?  
Unlock the OSD by pressing the [MENU/ ] button for at least 5 seconds.  
The screen shows strange colors or just black and white.  
Q:  
A:  
A:  
Q:  
Is the screen displaying only one color as if looking at the screen through a cellophane paper?  
Check the signal cable connection.  
Make sure the video card is fully inserted in its slot.  
Have the screen colors become strange after running a program or due to a crash between ap-  
plications?  
A:  
Q:  
A:  
Reboot the computer.  
Has the video card been set properly?  
Set the video card by referring to the video card manual.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
The screen suddenly has become unbalanced.  
Q:  
A:  
Q:  
A:  
Have you changed the video card or the driver?  
Adjust screen image position and size using the OSD.  
Have you adjusted the resolution or frequency to the monitor?  
Adjust the resolution and frequency at the video card.  
Q:  
The screen can be unbalanced due to the cycle of the video card signals. Readjust Position by  
referring to the OSD.  
The screen is out of focus or OSD cannot be adjusted.  
Q:  
A:  
Have you adjusted the resolution or frequency on the monitor?  
Adjust the resolution and frequency of the video card.  
LED is blinking but no images on the screen.  
Q:  
A:  
Is the frequency properly adjusted when checking the Display Timing on the menu?  
Adjust the frequency properly by referring to the video card manual and the Preset Timing  
Modes.  
(The maximum frequency per resolution may differ from product to product.)  
There are only 16 colors shown on the screen. The screen colors have changed after changing  
Q:  
A:  
Have the Windows colors been set properly?  
Windows XP :  
Set the resolution at the Control Panel Appearance and Themes Display Settings.  
Windows ME/2000 :  
A:  
Set the resolution at the Control Panel Display Settings.  
Has the video card been set properly?  
Q:  
A:  
Set the video card by referring to the video card manual.  
There is a message that reads "Unrecognized monitor, Plug & Play (VESA DDC) monitor found"  
Q:  
A:  
Q:  
A:  
Have you installed the monitor driver?  
Install the monitor driver according to the Driver Installation Instructions.  
See the video card manual to see if the Plug & Play (VESA DDC) function can be supported.  
Install the monitor driver according to the Driver Installation Instructions.  
My computer is on and the LED is blinking. However, only a blank screen is displayed on the mo  
Q:  
Check whether your computer is in hibernation mode (The monitor turns off).  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
A:  
Move your mouse or press any key to display the screen again.  
Problems related to Audio.  
Q:  
A:  
No sound.  
Ensure that the audio cable is firmly connected to both the audio-in port on your monitor and  
the audio-out port on your sound card.  
(Refer to Connecting Cables).  
Check the volume level.  
Sound level is too low.  
Q:  
A:  
Check the volume level.  
If the volume is still too low after turning the control to its maximum, check the volume control  
on the computer sound card or software program.  
Check when MagicTune™ does not function properly.  
Q:  
A:  
MagicTune™ feature is found only on PC (VGA) with Window OS that supports Plug and Play.  
To check whether your PC is available for MagicTune™ feature, follow the steps below (When  
Windows is XP);  
Control Panel Performance and Maintenance System Hardware Device Manager  
Monitors After deleting Plug and Play monitor, find 'Plug and Play monitor' by searching  
new Hardware.  
A:  
MagicTune™ is an additional software for the monitor. Some graphic cards may not support  
your monitor. When you have a problem with the graphic card, visit our website to check the  
compatible graphic card list provided.  
MagicTune™ doesn't work properly.  
Q:  
A:  
Have you changed your PC or video graphic card?  
Q:  
A:  
Did you install the program?  
Reboot the computer after installing the program for the first time. If a copy of the program is  
already installed, remove it, reboot the computer, and then install the program again. You need  
to reboot the computer for it to operate normally after installing or removing the program.  
Note  
Visit the MagicTune™ website and download the installation software for MagicTune™ MAC.  
Check the following items if there is trouble with the monitor.  
Check if the power cord and the video cables are properly connected to the computer.  
Check if the computer beeps more than 3 times when booting.  
(If it does, request an a service for the main board of the computer.)  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
If you installed a new video card or if you assembled the PC, check if the installed the adapter(video)  
driver and the monitor driver.  
Check if the scanning ratio of the video screen is set to between 56 Hz ~ 75 Hz.  
(Do not exceed 75 Hz when using the maximum resolution.)  
If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode, remove  
the Display Adapter in the "Control Panel System Device Administrator" and then reboot the  
computer to reinstall the adapter (video) driver.  
Note  
If problems repeatedly occur, contact an authorized service center.  
Q & A  
Q:  
A:  
A:  
How can I change the frequency?  
The frequency can be changed by reconfiguring the video card.  
Note that video card support can vary, depending on the version of the driver used. (Refer to the  
computer or the video card manual for details.)  
Q:  
A:  
How can I adjusts the resolution?  
Windows XP:  
Set the resolution in the Control Panel Appearance and Themes Display Settings.  
Windows ME/2000:  
A:  
Set the resolution in the Control Panel Display Settings.  
* Contact the video card manufacturer for details.  
How can I set the Power Saving function?  
Q:  
A:  
Windows XP:  
Set the resolution in the Control Panel Appearance and Themes Display Screen Saver.  
Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer Man-  
ual).  
A:  
Windows ME/2000:  
Set the resolution at the Control Panel Display Screen Saver.  
Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer Man-  
ual).  
Q:  
A:  
How can I clean the outer case/LCD Panel?  
Disconnect the power cord and then clean the monitor with a soft cloth, using either a cleaning  
solution or plain water.  
Do not leave any detergent or scratches on the case. Do not let any water enter the monitor.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Note  
Before calling for assistance, check the information in this section to see if you can remedy any prob-  
lems yourself. If you do need assistance, please call the phone number on the Information section or  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
General  
Model Name  
LCD Panel  
Size  
SyncMaster 633NW  
15.6 inch (39 cm)  
Display area  
344.232 mm(H) x 193.536 mm(V)  
0.252 mm(H) x 0.252 mm(V)  
Pixel Pitch  
Synchronization  
Horizontal  
30 ~ 61 kHz  
56 ~ 75 Hz  
Vertical  
Display Color  
16.7 M  
Resolution  
Optimum resolution  
1360 x 768@60 Hz  
1360 x 768@60 Hz  
Maximum resolution  
Input Signal, Terminated  
RGB Analog,  
0.7 Vp-p ± 5 %  
Separate H/V sync, Composite, SOG  
TTL level (V high 2.0 V, V low 0.8 V)  
Maximum Pixel Clock  
90 MHz (Analog)  
Power Supply  
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz  
Signal Cable  
15pin - to - 15pin D-sub cable, Detachable, 1500 +/- 20 mm  
Dimensions (W x H x D) / Weight (Simple Stand)  
386 x 264.5 x 67.2 mm (15.2 x 10.4 x 2.6 inch) (Without Stand)  
386 x 315.8 x 186.6 mm (15.2 x 12.4 x 7.3 inch) (With Stand)/ 2.55 kg (5.62 lbs)  
VESA Mounting Interface  
75 mm x 75 mm (For use with Specialty(Arm) Mounting hardware.)  
Environmental considerations  
Temperature : 50°F ~ 104°F (10°C ~ 40°C)  
Operating  
Humidity : 20 % ~ 80 %, non-condensing  
Temperature : -4°F ~ 140°F (-20°C ~ 60°C)  
Storage  
Humidity : 10 % ~ 80 %, non-condensing  
Plug and Play Capability  
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the  
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor  
installation will proceed automatically, unless the user wishes to select alternate settings.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dot Acceptable  
TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)  
above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright  
sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.  
Note  
Design and specifications are subject to change without prior notice.  
Class B Equipment (Information Communication equipment for residential use)  
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas  
including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PowerSaver  
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor  
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal  
operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or  
when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in  
your computer. Use the software utility installed on your computer to set up this feature.  
Power off (Power button)  
State  
Normal Operation  
Power saving mode  
EPA/ENERGY 2000  
Power Indicator  
On  
Blinking  
Off  
18 watts  
Power Consumption  
Less than 1 watts  
®
Less than 1 watts  
This monitor is EPA ENERGY STAR compliant and ENERGY 2000 compliant when used with  
a computer equipped with VESA DPM functionality.  
®
As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the  
®
ENERGY STAR guidelines for energy efficiency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Preset Timing Modes  
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted  
automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual  
and adjusts the screen as follows.  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency (Hz)  
Pixel Clock  
(MHz)  
Sync Polarity  
(H/V)  
Display Mode  
IBM, 640 x 350  
IBM, 640 x 480  
IBM, 720 x 400  
MAC, 640 x 480  
MAC, 832 x 624  
VESA, 640 x 480  
VESA, 640 x 480  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1360 X 768  
31.469  
31.469  
31.469  
35.000  
49.726  
37.861  
37.500  
35.156  
37.879  
48.077  
46.875  
48.363  
56.476  
60.023  
47.712  
70.086  
59.940  
70.087  
66.667  
74.551  
72.809  
75.000  
56.250  
60.317  
72.188  
75.000  
60.004  
70.069  
75.029  
60.015  
25.175  
25.175  
28.322  
30.240  
57.284  
31.500  
31.500  
36.000  
40.000  
50.000  
49.500  
65.000  
75.000  
78.750  
85.500  
+/-  
-/-  
-/+  
-/-  
-/-  
-/-  
-/-  
+/+  
+/+  
+/+  
+/+  
-/-  
-/-  
+/+  
+/+  
Horizontal Frequency  
The time to scan one line connecting the right edge to the left edge of the  
screen horizontally is called the Horizontal Cycle and the inverse number of  
the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz  
Vertical Frequency  
Like a fluorescent lamp, the screen has to repeat the same image many times  
per second to display an image to the user. The frequency of this repetition is  
called the Vertical Frequency or Refresh Rate. Unit: Hz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
General  
Model Name  
LCD Panel  
Size  
SyncMaster 733A  
17 inch (43 cm)  
Display area  
337.920 mm (H) x 270.336 mm (V)  
0.264 mm (H) x 0.264 mm (V)  
Pixel Pitch  
Synchronization  
Horizontal  
30 ~ 81 kHz  
56 ~ 75 Hz  
Vertical  
Display Color  
16.7M  
Resolution  
Optimum resolution  
1280 x 1024@60 Hz  
1280 x 1024@75 Hz  
Maximum resolution  
Input Signal, Terminated  
RGB Analog  
0.7 Vp-p ± 5 %  
Separate H/V sync, Composite, SOG  
TTL level (V high 2.0 V, V low 0.8 V)  
Maximum Pixel Clock  
135 MHz (Analog)  
Power Supply  
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz  
Signal Cable  
15pin - to - 15pin D-sub cable, Detachable  
Dimensions (W x H x D) / Weight (Simple Stand)  
380.6 x 349 x 72.3 mm / 15.0 x 13.7 x 2.8 inch (Without Stand)  
380.6 x 397.1 x 200 mm / 15.0 x 15.6 x 7.9 inch (With Stand), 3.8 kg / 8.4 lbs  
VESA Mounting Interface  
75 mm x 75 mm (For use with Specialty(Arm) Mounting hardware.)  
Environmental considerations  
Temperature : 50°F ~ 104°F (10°C ~ 40°C)  
Operating  
Humidity : 10 % ~ 80 %, non-condensing  
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)  
Storage  
Humidity : 5 % ~ 95 %, non-condensing  
Plug and Play Capability  
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the  
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor  
installation will proceed automatically, unless the user wishes to select alternate settings.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dot Acceptable  
TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)  
above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright  
sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.  
Note  
Design and specifications are subject to change without prior notice.  
Class B Equipment (Information Communication equipment for residential use)  
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas  
including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PowerSaver  
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor  
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal  
operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or  
when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in  
your computer. Use the software utility installed on your computer to set up this feature.  
Power off (Power button)  
State  
Normal Operation  
Power saving mode  
EPA/ENERGY 2000  
Power Indicator  
On  
Blinking  
Off  
Power Consumption  
30 watts  
Less than 1 watts  
®
Less than 1 watts  
This monitor is EPA ENERGY STAR compliant and ENERGY2000 compliant when used with  
a computer equipped with VESA DPM functionality.  
®
As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the  
®
ENERGY STAR guidelines for energy efficiency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Preset Timing Modes  
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted  
automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual  
and adjusts the screen as follows.  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency (Hz)  
Pixel Clock  
(MHz)  
Sync Polarity  
(H/V)  
Display Mode  
IBM640 x 350  
IBM640 x 480  
31.469  
31.469  
31.469  
35.000  
49.726  
68.681  
37.861  
37.500  
35.156  
37.879  
48.077  
46.875  
48.363  
56.476  
60.023  
67.500  
60.000  
63.981  
79.976  
49.702  
70.086  
59.940  
70.087  
66.667  
74.551  
75.062  
72.809  
75.000  
56.250  
60.317  
72.188  
75.000  
60.004  
70.069  
75.029  
75.000  
60.000  
60.020  
75.025  
59.810  
25.175  
25.175  
28.322  
30.240  
57.284  
100.000  
31.500  
31.500  
36.000  
40.000  
50.000  
49.500  
65.000  
75.000  
78.750  
108.000  
108.000  
108.000  
135.000  
83.500  
+/-  
-/-  
IBM720 x 400  
-/+  
-/-  
MAC640 x 480  
MAC832 x 624  
MAC1152 x 870  
VESA640 x 480  
VESA640 x 480  
VESA800 x 600  
VESA800 x 600  
VESA800 x 600  
VESA800 x 600  
VESA1024 x 768  
VESA1024 x 768  
VESA1024 x 768  
VESA1152 x 864  
VESA, 1280 X 960  
VESA, 1280 X 1024  
VESA, 1280 X 1024  
VESA, 1280 X 800  
-/-  
-/-  
-/-  
-/-  
+/+  
+/+  
+/+  
+/+  
-/-  
-/-  
+/+  
+/+  
+/+  
+/+  
+/+  
-/+  
Horizontal Frequency  
The time to scan one line connecting the right edge to the left edge of the  
screen horizontally is called the Horizontal Cycle and the inverse number of  
the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz  
Vertical Frequency  
Like a fluorescent lamp, the screen has to repeat the same image many times  
per second to display an image to the user. The frequency of this repetition is  
called the Vertical Frequency or Refresh Rate. Unit: Hz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
General  
Model Name  
LCD Panel  
Size  
SyncMaster 733APLUS  
17 inch (43 cm)  
Display area  
337.920 mm (H) x 270.336 mm (V)  
0.264 mm (H) x 0.264 mm (V)  
Pixel Pitch  
Synchronization  
Horizontal  
30 ~ 81 kHz  
56 ~ 75 Hz  
Vertical  
Display Color  
16.7M  
Resolution  
Optimum resolution  
1280 x 1024@60 Hz  
1280 x 1024@75 Hz  
Maximum resolution  
Input Signal, Terminated  
RGB Analog  
0.7 Vp-p ± 5 %  
Separate H/V sync, Composite, SOG  
TTL level (V high 2.0 V, V low 0.8 V)  
Maximum Pixel Clock  
135 MHz (Analog)  
Power Supply  
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz  
Signal Cable  
15pin - to - 15pin D-sub cable, Detachable  
Dimensions (W x H x D) / Weight (Simple Stand)  
380.6 x 349 x 72.3 mm / 15.0 x 13.7 x 2.8 inch (Without Stand)  
380.6 x 397.1 x 200 mm / 15.0 x 15.6 x 7.9 inch (With Stand), 3.8 kg / 8.4 lbs  
VESA Mounting Interface  
75 mm x 75 mm (For use with Specialty(Arm) Mounting hardware.)  
Environmental considerations  
Temperature : 50°F ~ 104°F (10°C ~ 40°C)  
Operating  
Humidity : 10 % ~ 80 %, non-condensing  
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)  
Storage  
Humidity : 5 % ~ 95 %, non-condensing  
Plug and Play Capability  
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the  
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor  
installation will proceed automatically, unless the user wishes to select alternate settings.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dot Acceptable  
TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)  
above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright  
sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.  
Note  
Design and specifications are subject to change without prior notice.  
Class B Equipment (Information Communication equipment for residential use)  
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas  
including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PowerSaver  
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor  
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal  
operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or  
when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in  
your computer. Use the software utility installed on your computer to set up this feature.  
Power off (Power button)  
State  
Normal Operation  
Power saving mode  
EPA/ENERGY 2000  
Power Indicator  
On  
Blinking  
Off  
Power Consumption  
30 watts  
Less than 1 watts  
®
Less than 1 watts  
This monitor is EPA ENERGY STAR compliant and ENERGY2000 compliant when used with  
a computer equipped with VESA DPM functionality.  
®
As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the  
®
ENERGY STAR guidelines for energy efficiency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Preset Timing Modes  
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted  
automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual  
and adjusts the screen as follows.  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency (Hz)  
Pixel Clock  
(MHz)  
Sync Polarity  
(H/V)  
Display Mode  
IBM640 x 350  
IBM640 x 480  
31.469  
31.469  
31.469  
35.000  
49.726  
68.681  
37.861  
37.500  
35.156  
37.879  
48.077  
46.875  
48.363  
56.476  
60.023  
67.500  
60.000  
63.981  
79.976  
49.702  
70.086  
59.940  
70.087  
66.667  
74.551  
75.062  
72.809  
75.000  
56.250  
60.317  
72.188  
75.000  
60.004  
70.069  
75.029  
75.000  
60.000  
60.020  
75.025  
59.810  
25.175  
25.175  
28.322  
30.240  
57.284  
100.000  
31.500  
31.500  
36.000  
40.000  
50.000  
49.500  
65.000  
75.000  
78.750  
108.000  
108.000  
108.000  
135.000  
83.500  
+/-  
-/-  
IBM720 x 400  
-/+  
-/-  
MAC640 x 480  
MAC832 x 624  
MAC1152 x 870  
VESA640 x 480  
VESA640 x 480  
VESA800 x 600  
VESA800 x 600  
VESA800 x 600  
VESA800 x 600  
VESA1024 x 768  
VESA1024 x 768  
VESA1024 x 768  
VESA1152 x 864  
VESA, 1280 X 960  
VESA, 1280 X 1024  
VESA, 1280 X 1024  
VESA, 1280 X 800  
-/-  
-/-  
-/-  
-/-  
+/+  
+/+  
+/+  
+/+  
-/-  
-/-  
+/+  
+/+  
+/+  
+/+  
+/+  
-/+  
Horizontal Frequency  
The time to scan one line connecting the right edge to the left edge of the  
screen horizontally is called the Horizontal Cycle and the inverse number of  
the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz  
Vertical Frequency  
Like a fluorescent lamp, the screen has to repeat the same image many times  
per second to display an image to the user. The frequency of this repetition is  
called the Vertical Frequency or Refresh Rate. Unit: Hz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
General  
Model Name  
LCD Panel  
Size  
SyncMaster 733N  
17 inch (43 cm)  
Display area  
337.920 mm (H) x 270.336 mm (V)  
0.264 mm (H) x 0.264 mm (V)  
Pixel Pitch  
Synchronization  
Horizontal  
30 ~ 81 kHz  
56 ~ 75 Hz  
Vertical  
Display Color  
16.7M  
Resolution  
Optimum resolution  
1280 x 1024@60 Hz  
1280 x 1024@75 Hz  
Maximum resolution  
Input Signal, Terminated  
RGB Analog  
0.7 Vp-p ± 5 %  
Separate H/V sync, Composite, SOG  
TTL level (V high 2.0 V, V low 0.8 V)  
Maximum Pixel Clock  
135 MHz (Analog)  
Power Supply  
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz  
Signal Cable  
15pin - to - 15pin D-sub cable, Detachable  
Dimensions (W x H x D) / Weight (Simple Stand)  
380.6 x 349 x 72.3 mm / 15.0 x 13.7 x 2.8 inch (Without Stand)  
380.6 x 397.1 x 200 mm / 15.0 x 15.6 x 7.9 inch (With Stand), 3.8 kg / 8.4 lbs  
VESA Mounting Interface  
75 mm x 75 mm (For use with Specialty(Arm) Mounting hardware.)  
Environmental considerations  
Temperature : 50°F ~ 104°F (10°C ~ 40°C)  
Operating  
Humidity : 10 % ~ 80 %, non-condensing  
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)  
Storage  
Humidity : 5 % ~ 95 %, non-condensing  
Plug and Play Capability  
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the  
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor  
installation will proceed automatically, unless the user wishes to select alternate settings.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dot Acceptable  
TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)  
above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright  
sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.  
Note  
Design and specifications are subject to change without prior notice.  
Class B Equipment (Information Communication equipment for residential use)  
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas  
including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PowerSaver  
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor  
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal  
operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or  
when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in  
your computer. Use the software utility installed on your computer to set up this feature.  
Power off (Power button)  
State  
Normal Operation  
Power saving mode  
EPA/ENERGY 2000  
Power Indicator  
On  
Blinking  
Off  
Power Consumption  
30 watts  
Less than 1 watts  
®
Less than 1 watts  
This monitor is EPA ENERGY STAR compliant and ENERGY2000 compliant when used with  
a computer equipped with VESA DPM functionality.  
®
As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the  
®
ENERGY STAR guidelines for energy efficiency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Preset Timing Modes  
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted  
automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual  
and adjusts the screen as follows.  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency (Hz)  
Pixel Clock  
(MHz)  
Sync Polarity  
(H/V)  
Display Mode  
IBM, 640 x 350  
IBM, 640 x 480  
31.469  
31.469  
31.469  
35.000  
49.726  
68.681  
37.861  
37.500  
35.156  
37.879  
48.077  
46.875  
48.363  
56.476  
60.023  
67.500  
60.000  
63.981  
79.976  
49.702  
70.086  
59.940  
70.087  
66.667  
74.551  
75.062  
72.809  
75.000  
56.250  
60.317  
72.188  
75.000  
60.004  
70.069  
75.029  
75.000  
60.000  
60.020  
75.025  
59.810  
25.175  
25.175  
28.322  
30.240  
57.284  
100.000  
31.500  
31.500  
36.000  
40.000  
50.000  
49.500  
65.000  
75.000  
78.750  
108.000  
108.000  
108.000  
135.000  
83.500  
+/-  
-/-  
IBM, 720 x 400  
-/+  
-/-  
MAC, 640 x 480  
MAC, 832 x 624  
MAC, 1152 x 870  
VESA, 640 x 480  
VESA, 640 x 480  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1152 x 864  
VESA, 1280 X 960  
VESA, 1280 X 1024  
VESA, 1280 X 1024  
VESA, 1280 x 800  
-/-  
-/-  
-/-  
-/-  
+/+  
+/+  
+/+  
+/+  
-/-  
-/-  
+/+  
+/+  
+/+  
+/+  
+/+  
-/+  
Horizontal Frequency  
The time to scan one line connecting the right edge to the left edge of the  
screen horizontally is called the Horizontal Cycle and the inverse number of  
the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz  
Vertical Frequency  
Like a fluorescent lamp, the screen has to repeat the same image many times  
per second to display an image to the user. The frequency of this repetition is  
called the Vertical Frequency or Refresh Rate. Unit: Hz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
General  
Model Name  
LCD Panel  
Size  
SyncMaster 733NPLUS  
17 inch (43 cm)  
Display area  
337.920 mm (H) x 270.336 mm (V)  
0.264 mm (H) x 0.264 mm (V)  
Pixel Pitch  
Synchronization  
Horizontal  
30 ~ 81 kHz  
56 ~ 75 Hz  
Vertical  
Display Color  
16.7M  
Resolution  
Optimum resolution  
1280 x 1024@60 Hz  
1280 x 1024@75 Hz  
Maximum resolution  
Input Signal, Terminated  
RGB Analog  
0.7 Vp-p ± 5 %  
Separate H/V sync, Composite, SOG  
TTL level (V high 2.0 V, V low 0.8 V)  
Maximum Pixel Clock  
135 MHz (Analog)  
Power Supply  
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz  
Signal Cable  
15pin - to - 15pin D-sub cable, Detachable  
Dimensions (W x H x D) / Weight (Simple Stand)  
380.6 x 349 x 72.3 mm / 15.0 x 13.7 x 2.8 inch (Without Stand)  
380.6 x 397.1 x 200 mm / 15.0 x 15.6 x 7.9 inch (With Stand), 3.8 kg / 8.4 lbs  
VESA Mounting Interface  
75 mm x 75 mm (For use with Specialty(Arm) Mounting hardware.)  
Environmental considerations  
Temperature : 50°F ~ 104°F (10°C ~ 40°C)  
Operating  
Humidity : 10 % ~ 80 %, non-condensing  
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)  
Storage  
Humidity : 5 % ~ 95 %, non-condensing  
Plug and Play Capability  
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the  
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor  
installation will proceed automatically, unless the user wishes to select alternate settings.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dot Acceptable  
TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)  
above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright  
sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.  
Note  
Design and specifications are subject to change without prior notice.  
Class B Equipment (Information Communication equipment for residential use)  
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas  
including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PowerSaver  
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor  
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal  
operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or  
when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in  
your computer. Use the software utility installed on your computer to set up this feature.  
Power off (Power button)  
State  
Normal Operation  
Power saving mode  
EPA/ENERGY 2000  
Power Indicator  
On  
Blinking  
Off  
Power Consumption  
30 watts  
Less than 1 watts  
®
Less than 1 watts  
This monitor is EPA ENERGY STAR compliant and ENERGY2000 compliant when used with  
a computer equipped with VESA DPM functionality.  
®
As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the  
®
ENERGY STAR guidelines for energy efficiency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Preset Timing Modes  
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted  
automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual  
and adjusts the screen as follows.  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency (Hz)  
Pixel Clock  
(MHz)  
Sync Polarity  
(H/V)  
Display Mode  
IBM, 640 x 350  
IBM, 640 x 480  
31.469  
31.469  
31.469  
35.000  
49.726  
68.681  
37.861  
37.500  
35.156  
37.879  
48.077  
46.875  
48.363  
56.476  
60.023  
67.500  
60.000  
63.981  
79.976  
49.702  
70.086  
59.940  
70.087  
66.667  
74.551  
75.062  
72.809  
75.000  
56.250  
60.317  
72.188  
75.000  
60.004  
70.069  
75.029  
75.000  
60.000  
60.020  
75.025  
59.810  
25.175  
25.175  
28.322  
30.240  
57.284  
100.000  
31.500  
31.500  
36.000  
40.000  
50.000  
49.500  
65.000  
75.000  
78.750  
108.000  
108.000  
108.000  
135.000  
83.500  
+/-  
-/-  
IBM, 720 x 400  
-/+  
-/-  
MAC, 640 x 480  
MAC, 832 x 624  
MAC, 1152 x 870  
VESA, 640 x 480  
VESA, 640 x 480  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1152 x 864  
VESA, 1280 X 960  
VESA, 1280 X 1024  
VESA, 1280 X 1024  
VESA, 1280 x 800  
-/-  
-/-  
-/-  
-/-  
+/+  
+/+  
+/+  
+/+  
-/-  
-/-  
+/+  
+/+  
+/+  
+/+  
+/+  
-/+  
Horizontal Frequency  
The time to scan one line connecting the right edge to the left edge of the  
screen horizontally is called the Horizontal Cycle and the inverse number of  
the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz  
Vertical Frequency  
Like a fluorescent lamp, the screen has to repeat the same image many times  
per second to display an image to the user. The frequency of this repetition is  
called the Vertical Frequency or Refresh Rate. Unit: Hz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
General  
Model Name  
LCD Panel  
Size  
SyncMaster 733NW  
17 inch (43 cm)  
Display area  
367.2 mm(H) x 229.5 mm(V)  
0.255 mm(H) x 0.255 mm(V)  
Pixel Pitch  
Synchronization  
Horizontal  
30 ~ 81 kHz  
56 ~ 75 Hz  
Vertical  
Display Color  
16.2 M  
Resolution  
Optimum resolution  
1440 x 900@60 Hz  
1440 x 900@75 Hz  
Maximum resolution  
Input Signal, Terminated  
RGB Analog,  
0.7 Vp-p ± 5 %  
Separate H/V sync, Composite, SOG  
TTL level (V high 2.0 V, V low 0.8 V)  
Maximum Pixel Clock  
136.75 MHz (Analog)  
Power Supply  
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz  
Signal Cable  
15pin - to - 15pin D-sub cable, Detachable, 1500 +/- 20 mm  
Dimensions (W x H x D) / Weight (Simple Stand)  
410.9 x 302.5 x 64.5 mm (16.2 x 11.9 x 2.5 inch) (Without Stand)  
410.9 x 351.2 x 187 mm (16.2 x 13.8 x 7.4 inch) (With Stand)/ 2.8 kg (6.17 lbs)  
VESA Mounting Interface  
75 mm x 75 mm (For use with Specialty(Arm) Mounting hardware.)  
Environmental considerations  
Temperature : 32 °F ~ 104°F (0°C ~ 40°C)  
Operating  
Humidity : 20 % ~ 80 %, non-condensing  
Temperature : -4°F ~ 140°F (-20°C ~ 60°C)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Storage  
Humidity : 10 % ~ 80 %, non-condensing  
Plug and Play Capability  
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the  
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor  
installation will proceed automatically, unless the user wishes to select alternate settings.  
Dot Acceptable  
TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)  
above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright  
sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.  
Note  
Design and specifications are subject to change without prior notice.  
Class B Equipment (Information Communication equipment for residential use)  
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas  
including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PowerSaver  
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor  
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal  
operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or  
when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in  
your computer. Use the software utility installed on your computer to set up this feature.  
Power off (Power button)  
State  
Normal Operation  
Power saving mode  
EPA/ENERGY 2000  
On  
Off  
Power Indicator  
Blinking  
Power Consumption  
20 watts  
Less than 1 watts  
®
Less than 1 watts  
This monitor is EPA ENERGY STAR compliant and ENERGY 2000 compliant when used with  
a computer equipped with VESA DPM functionality.  
®
As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the  
®
ENERGY STAR guidelines for energy efficiency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Preset Timing Modes  
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted  
automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual  
and adjusts the screen as follows.  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency (Hz)  
Pixel Clock  
(MHz)  
Sync Polarity  
(H/V)  
Display Mode  
IBM, 640 x 350  
IBM, 640 x 480  
31.469  
31.469  
31.469  
35.000  
49.726  
68.681  
37.861  
37.500  
35.156  
37.879  
48.077  
46.875  
48.363  
56.476  
60.023  
67.500  
60.000  
63.981  
79.976  
49.702  
70.086  
59.940  
70.087  
66.667  
74.551  
75.062  
72.809  
75.000  
56.250  
60.317  
72.188  
75.000  
60.004  
70.069  
75.029  
75.000  
60.000  
60.020  
75.025  
59.810  
25.175  
25.175  
28.322  
30.240  
57.284  
100.000  
31.500  
31.500  
36.000  
40.000  
50.000  
49.500  
65.000  
75.000  
78.750  
108.000  
108.000  
108.000  
135.000  
83.500  
+/-  
-/-  
IBM, 720 x 400  
-/+  
-/-  
MAC, 640 x 480  
MAC, 832 x 624  
MAC, 1152 x 870  
VESA, 640 x 480  
VESA, 640 x 480  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1152 x 864  
VESA, 1280 X 960  
VESA, 1280 X 1024  
VESA, 1280 X 1024  
VESA, 1280 x 800  
-/-  
-/-  
-/-  
-/-  
+/+  
+/+  
+/+  
+/+  
-/-  
-/-  
+/+  
+/+  
+/+  
+/+  
+/+  
-/+  
Horizontal Frequency  
The time to scan one line connecting the right edge to the left edge of the  
screen horizontally is called the Horizontal Cycle and the inverse number of  
the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz  
Vertical Frequency  
Like a fluorescent lamp, the screen has to repeat the same image many times  
per second to display an image to the user. The frequency of this repetition is  
called the Vertical Frequency or Refresh Rate. Unit: Hz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
General  
Model Name  
LCD Panel  
Size  
SyncMaster 933BW  
19 inch (48 cm)  
Display area  
408.24 mm (H) x 255.15 mm (V)  
0.2835 mm (H) x 0.2835 mm (V)  
Pixel Pitch  
Synchronization  
Horizontal  
30 ~ 81 kHz  
56 ~ 75 Hz  
Vertical  
Display Color  
16.7M  
Resolution  
Optimum resolution  
1440 x 900@60 Hz  
1440 x 900@75 Hz  
Maximum resolution  
Input Signal, Terminated  
RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB  
0.7 Vp-p ± 5 %  
Separate H/V sync, Composite, SOG  
TTL level (V high 2.0 V, V low 0.8 V)  
Maximum Pixel Clock  
137 MHz (Analog, Digital)  
Power Supply  
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz  
Signal Cable  
15pin - to - 15pin D-sub cable, Detachable  
DVI-D to DVI-D connector, Detachable  
Dimensions (W x H x D) / Weight (Simple Stand)  
451.0 x 331.7 x 72.4 mm / 17.8 x 13.1 x 2.9 inch (Without Stand)  
451.0 x 379.3 x 200.0 mm / 17.8 x 14.9 x 7.9 inch (With Stand), 4 kg / 8.82 lbs  
VESA Mounting Interface  
75 mm x 75 mm (For use with Specialty(Arm) Mounting hardware.)  
Environmental considerations  
Temperature : 50°F ~ 104°F (10°C ~ 40°C)  
Operating  
Humidity : 10 % ~ 80 %, non-condensing  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)  
Humidity : 5 % ~ 95 %, non-condensing  
Storage  
Plug and Play Capability  
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the  
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor  
installation will proceed automatically, unless the user wishes to select alternate settings.  
Dot Acceptable  
TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)  
above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright  
sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.  
Note  
Design and specifications are subject to change without prior notice.  
Class B Equipment (Information Communication equipment for residential use)  
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas  
including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PowerSaver  
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor  
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal  
operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or  
when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in  
your computer. Use the software utility installed on your computer to set up this feature.  
Power off (Power button)  
State  
Normal Operation  
Power saving mode  
EPA/ENERGY 2000  
On  
Off  
Power Indicator  
Blinking  
Power Consumption  
34 watts  
Less than 1 watts  
®
Less than 1 watts  
This monitor is EPA ENERGY STAR compliant and ENERGY 2000 compliant when used with  
a computer equipped with VESA DPM functionality.  
®
As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the  
®
ENERGY STAR guidelines for energy efficiency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Preset Timing Modes  
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted  
automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual  
and adjusts the screen as follows.  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency (Hz)  
Pixel Clock  
(MHz)  
Sync Polarity  
(H/V)  
Display Mode  
IBM, 720 x 400  
MAC, 640 x 480  
MAC, 832 x 624  
MAC, 1152 x 870  
VESA, 640 x 480  
VESA, 640 x 480  
VESA, 640 x 480  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1152 x 864  
VESA, 1280 x 800  
VESA, 1280 X 960  
VESA, 1280 X 1024  
VESA, 1280 X 1024  
VESA, 1440 X 900  
VESA, 1440 X 900  
31.469  
35.000  
49.726  
68.681  
31.469  
37.861  
37.500  
35.156  
37.879  
48.077  
46.875  
48.363  
56.476  
60.023  
67.500  
49.702  
60.000  
63.981  
79.976  
55.935  
70.635  
70.087  
66.667  
74.551  
75.062  
59.940  
72.809  
75.000  
56.250  
60.317  
72.188  
75.000  
60.004  
70.069  
75.029  
75.000  
59.810  
60.000  
60.020  
75.025  
59.887  
74.984  
28.322  
30.240  
57.284  
100.000  
25.175  
31.500  
31.500  
36.000  
40.000  
50.000  
49.500  
65.000  
75.000  
78.750  
108.000  
83.500  
108.000  
108.000  
135.000  
106.500  
136.750  
-/+  
-/-  
-/-  
-/-  
-/-  
-/-  
-/-  
+/+  
+/+  
+/+  
+/+  
-/-  
-/-  
+/+  
+/+  
+/+  
+/+  
+/+  
+/+  
-/+  
-/+  
Horizontal Frequency  
The time to scan one line connecting the right edge to the left edge of the  
screen horizontally is called the Horizontal Cycle and the inverse number of  
the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz  
Vertical Frequency  
Like a fluorescent lamp, the screen has to repeat the same image many times  
per second to display an image to the user. The frequency of this repetition is  
called the Vertical Frequency or Refresh Rate. Unit: Hz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
General  
Model Name  
LCD Panel  
Size  
SyncMaster 933BWPLUS  
19 inch (48 cm)  
Display area  
408.24 mm (H) x 255.15 mm (V)  
0.2835 mm (H) x 0.2835 mm (V)  
Pixel Pitch  
Synchronization  
Horizontal  
30 ~ 81 kHz  
56 ~ 75 Hz  
Vertical  
Display Color  
16.7M  
Resolution  
Optimum resolution  
1440 x 900@60 Hz  
1440 x 900@75 Hz  
Maximum resolution  
Input Signal, Terminated  
RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB  
0.7 Vp-p ± 5 %  
Separate H/V sync, Composite, SOG  
TTL level (V high 2.0 V, V low 0.8 V)  
Maximum Pixel Clock  
137 MHz (Analog, Digital)  
Power Supply  
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz  
Signal Cable  
15pin - to - 15pin D-sub cable, Detachable  
DVI-D to DVI-D connector, Detachable  
Dimensions (W x H x D) / Weight (Simple Stand)  
451.0 x 331.7 x 72.4 mm / 17.8 x 13.1 x 2.9 inch (Without Stand)  
451.0 x 379.3 x 200.0 mm / 17.8 x 14.9 x 7.9 inch (With Stand), 4 kg / 8.82 lbs  
VESA Mounting Interface  
75 mm x 75 mm (For use with Specialty(Arm) Mounting hardware.)  
Environmental considerations  
Temperature : 50°F ~ 104°F (10°C ~ 40°C)  
Operating  
Humidity : 10 % ~ 80 %, non-condensing  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)  
Humidity : 5 % ~ 95 %, non-condensing  
Storage  
Plug and Play Capability  
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the  
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor  
installation will proceed automatically, unless the user wishes to select alternate settings.  
Dot Acceptable  
TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)  
above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright  
sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.  
Note  
Design and specifications are subject to change without prior notice.  
Class B Equipment (Information Communication equipment for residential use)  
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas  
including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PowerSaver  
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor  
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal  
operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or  
when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in  
your computer. Use the software utility installed on your computer to set up this feature.  
Power off (Power button)  
State  
Normal Operation  
Power saving mode  
EPA/ENERGY 2000  
On  
Off  
Power Indicator  
Blinking  
Power Consumption  
34 watts  
Less than 1 watts  
®
Less than 1 watts  
This monitor is EPA ENERGY STAR compliant and ENERGY 2000 compliant when used with  
a computer equipped with VESA DPM functionality.  
®
As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the  
®
ENERGY STAR guidelines for energy efficiency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Preset Timing Modes  
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted  
automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual  
and adjusts the screen as follows.  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency (Hz)  
Pixel Clock  
(MHz)  
Sync Polarity  
(H/V)  
Display Mode  
IBM, 720 x 400  
MAC, 640 x 480  
MAC, 832 x 624  
MAC, 1152 x 870  
VESA, 640 x 480  
VESA, 640 x 480  
VESA, 640 x 480  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1152 x 864  
VESA, 1280 x 800  
VESA, 1280 X 960  
VESA, 1280 X 1024  
VESA, 1280 X 1024  
VESA, 1440 X 900  
VESA, 1440 X 900  
31.469  
35.000  
49.726  
68.681  
31.469  
37.861  
37.500  
35.156  
37.879  
48.077  
46.875  
48.363  
56.476  
60.023  
67.500  
49.702  
60.000  
63.981  
79.976  
55.935  
70.635  
70.087  
66.667  
74.551  
75.062  
59.940  
72.809  
75.000  
56.250  
60.317  
72.188  
75.000  
60.004  
70.069  
75.029  
75.000  
59.810  
60.000  
60.020  
75.025  
59.887  
74.984  
28.322  
30.240  
57.284  
100.000  
25.175  
31.500  
31.500  
36.000  
40.000  
50.000  
49.500  
65.000  
75.000  
78.750  
108.000  
83.500  
108.000  
108.000  
135.000  
106.500  
136.750  
-/+  
-/-  
-/-  
-/-  
-/-  
-/-  
-/-  
+/+  
+/+  
+/+  
+/+  
-/-  
-/-  
+/+  
+/+  
+/+  
+/+  
+/+  
+/+  
-/+  
-/+  
Horizontal Frequency  
The time to scan one line connecting the right edge to the left edge of the  
screen horizontally is called the Horizontal Cycle and the inverse number of  
the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz  
Vertical Frequency  
Like a fluorescent lamp, the screen has to repeat the same image many times  
per second to display an image to the user. The frequency of this repetition is  
called the Vertical Frequency or Refresh Rate. Unit: Hz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
General  
Model Name  
LCD Panel  
Size  
SyncMaster 933GW  
19 inch (48 cm)  
Display area  
408.24 mm (H) x 255.15 mm (V)  
0.2835 mm (H) x 0.2835 mm (V)  
Pixel Pitch  
Synchronization  
Horizontal  
30 ~ 81 kHz  
56 ~ 75 Hz  
Vertical  
Display Color  
16.7M  
Resolution  
Optimum resolution  
1440 x 900@60 Hz  
1440 x 900@75 Hz  
Maximum resolution  
Input Signal, Terminated  
RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB  
0.7 Vp-p ± 5 %  
Separate H/V sync, Composite, SOG  
TTL level (V high 2.0 V, V low 0.8 V)  
Maximum Pixel Clock  
137 MHz (Analog, Digital)  
Power Supply  
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz  
Signal Cable  
15pin - to - 15pin D-sub cable, Detachable  
DVI-D to DVI-D connector, Detachable  
Dimensions (W x H x D) / Weight (Simple Stand)  
451.0 x 331.7 x 72.4 mm / 17.8 x 13.1 x 2.9 inch (Without Stand)  
451.0 x 379.3 x 200.0 mm / 17.8 x 14.9 x 7.9 inch (With Stand), 4 kg / 8.82 lbs  
VESA Mounting Interface  
75 mm x 75 mm (For use with Specialty(Arm) Mounting hardware.)  
Environmental considerations  
Temperature : 50°F ~ 104°F (10°C ~ 40°C)  
Operating  
Humidity : 10 % ~ 80 %, non-condensing  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)  
Humidity : 5 % ~ 95 %, non-condensing  
Storage  
Plug and Play Capability  
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the  
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor  
installation will proceed automatically, unless the user wishes to select alternate settings.  
Dot Acceptable  
TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)  
above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright  
sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.  
Note  
Design and specifications are subject to change without prior notice.  
Class B Equipment (Information Communication equipment for residential use)  
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas  
including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PowerSaver  
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor  
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal  
operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or  
when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in  
your computer. Use the software utility installed on your computer to set up this feature.  
Power off (Power button)  
State  
Normal Operation  
Power saving mode  
EPA/ENERGY 2000  
On  
Off  
Power Indicator  
Blinking  
Power Consumption  
34 watts  
Less than 1 watts  
®
Less than 1 watts  
This monitor is EPA ENERGY STAR compliant and ENERGY 2000 compliant when used with  
a computer equipped with VESA DPM functionality.  
®
As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the  
®
ENERGY STAR guidelines for energy efficiency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Preset Timing Modes  
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted  
automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual  
and adjusts the screen as follows.  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency (Hz)  
Pixel Clock  
(MHz)  
Sync Polarity  
(H/V)  
Display Mode  
IBM, 720 x 400  
MAC, 640 x 480  
MAC, 832 x 624  
MAC, 1152 x 870  
VESA, 640 x 480  
VESA, 640 x 480  
VESA, 640 x 480  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1152 x 864  
VESA, 1280 x 800  
VESA, 1280 X 960  
VESA, 1280 X 1024  
VESA, 1280 X 1024  
VESA, 1440 X 900  
VESA, 1440 X 900  
31.469  
35.000  
49.726  
68.681  
31.469  
37.861  
37.500  
35.156  
37.879  
48.077  
46.875  
48.363  
56.476  
60.023  
67.500  
49.702  
60.000  
63.981  
79.976  
55.935  
70.635  
70.087  
66.667  
74.551  
75.062  
59.940  
72.809  
75.000  
56.250  
60.317  
72.188  
75.000  
60.004  
70.069  
75.029  
75.000  
59.810  
60.000  
60.020  
75.025  
59.887  
74.984  
28.322  
30.240  
57.284  
100.000  
25.175  
31.500  
31.500  
36.000  
40.000  
50.000  
49.500  
65.000  
75.000  
78.750  
108.000  
83.500  
108.000  
108.000  
135.000  
106.500  
136.750  
-/+  
-/-  
-/-  
-/-  
-/-  
-/-  
-/-  
+/+  
+/+  
+/+  
+/+  
-/-  
-/-  
+/+  
+/+  
+/+  
+/+  
+/+  
+/+  
-/+  
-/+  
Horizontal Frequency  
The time to scan one line connecting the right edge to the left edge of the  
screen horizontally is called the Horizontal Cycle and the inverse number of  
the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz  
Vertical Frequency  
Like a fluorescent lamp, the screen has to repeat the same image many times  
per second to display an image to the user. The frequency of this repetition is  
called the Vertical Frequency or Refresh Rate. Unit: Hz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
General  
Model Name  
LCD Panel  
Size  
SyncMaster 933GWPLUS  
19 inch (48 cm)  
Display area  
408.24 mm (H) x 255.15 mm (V)  
0.2835 mm (H) x 0.2835 mm (V)  
Pixel Pitch  
Synchronization  
Horizontal  
30 ~ 81 kHz  
56 ~ 75 Hz  
Vertical  
Display Color  
16.7M  
Resolution  
Optimum resolution  
1440 x 900@60 Hz  
1440 x 900@75 Hz  
Maximum resolution  
Input Signal, Terminated  
RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB  
0.7 Vp-p ± 5 %  
Separate H/V sync, Composite, SOG  
TTL level (V high 2.0 V, V low 0.8 V)  
Maximum Pixel Clock  
137 MHz (Analog, Digital)  
Power Supply  
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz  
Signal Cable  
15pin - to - 15pin D-sub cable, Detachable  
DVI-D to DVI-D connector, Detachable  
Dimensions (W x H x D) / Weight (Simple Stand)  
451.0 x 331.7 x 72.4 mm / 17.8 x 13.1 x 2.9 inch (Without Stand)  
451.0 x 379.3 x 200.0 mm / 17.8 x 14.9 x 7.9 inch (With Stand), 4 kg / 8.82 lbs  
VESA Mounting Interface  
75 mm x 75 mm (For use with Specialty(Arm) Mounting hardware.)  
Environmental considerations  
Temperature : 50°F ~ 104°F (10°C ~ 40°C)  
Operating  
Humidity : 10 % ~ 80 %, non-condensing  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)  
Humidity : 5 % ~ 95 %, non-condensing  
Storage  
Plug and Play Capability  
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the  
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor  
installation will proceed automatically, unless the user wishes to select alternate settings.  
Dot Acceptable  
TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)  
above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright  
sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.  
Note  
Design and specifications are subject to change without prior notice.  
Class B Equipment (Information Communication equipment for residential use)  
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas  
including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PowerSaver  
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor  
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal  
operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or  
when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in  
your computer. Use the software utility installed on your computer to set up this feature.  
Power off (Power button)  
State  
Normal Operation  
Power saving mode  
EPA/ENERGY 2000  
On  
Off  
Power Indicator  
Blinking  
Power Consumption  
34 watts  
Less than 1 watts  
®
Less than 1 watts  
This monitor is EPA ENERGY STAR compliant and ENERGY 2000 compliant when used with  
a computer equipped with VESA DPM functionality.  
®
As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the  
®
ENERGY STAR guidelines for energy efficiency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Preset Timing Modes  
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted  
automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual  
and adjusts the screen as follows.  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency (Hz)  
Pixel Clock  
(MHz)  
Sync Polarity  
(H/V)  
Display Mode  
IBM, 720 x 400  
MAC, 640 x 480  
MAC, 832 x 624  
MAC, 1152 x 870  
VESA, 640 x 480  
VESA, 640 x 480  
VESA, 640 x 480  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1152 x 864  
VESA, 1280 x 800  
VESA, 1280 X 960  
VESA, 1280 X 1024  
VESA, 1280 X 1024  
VESA, 1440 X 900  
VESA, 1440 X 900  
31.469  
35.000  
49.726  
68.681  
31.469  
37.861  
37.500  
35.156  
37.879  
48.077  
46.875  
48.363  
56.476  
60.023  
67.500  
49.702  
60.000  
63.981  
79.976  
55.935  
70.635  
70.087  
66.667  
74.551  
75.062  
59.940  
72.809  
75.000  
56.250  
60.317  
72.188  
75.000  
60.004  
70.069  
75.029  
75.000  
59.810  
60.000  
60.020  
75.025  
59.887  
74.984  
28.322  
30.240  
57.284  
100.000  
25.175  
31.500  
31.500  
36.000  
40.000  
50.000  
49.500  
65.000  
75.000  
78.750  
108.000  
83.500  
108.000  
108.000  
135.000  
106.500  
136.750  
-/+  
-/-  
-/-  
-/-  
-/-  
-/-  
-/-  
+/+  
+/+  
+/+  
+/+  
-/-  
-/-  
+/+  
+/+  
+/+  
+/+  
+/+  
+/+  
-/+  
-/+  
Horizontal Frequency  
The time to scan one line connecting the right edge to the left edge of the  
screen horizontally is called the Horizontal Cycle and the inverse number of  
the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz  
Vertical Frequency  
Like a fluorescent lamp, the screen has to repeat the same image many times  
per second to display an image to the user. The frequency of this repetition is  
called the Vertical Frequency or Refresh Rate. Unit: Hz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
General  
Model Name  
LCD Panel  
Size  
SyncMaster 933NW  
19 inch (48 cm)  
Display area  
408.24 mm (H) x 255.15 mm (V)  
0.2835 mm (H) x 0.2835 mm (V)  
Pixel Pitch  
Synchronization  
Horizontal  
30 ~ 81 kHz  
56 ~ 75 Hz  
Vertical  
Display Color  
16.7M  
Resolution  
Optimum resolution  
1440 x 900@60 Hz  
1440 x 900@75 Hz  
Maximum resolution  
Input Signal, Terminated  
RGB Analog  
0.7 Vp-p ± 5 %  
Separate H/V sync, Composite, SOG  
TTL level (V high 2.0 V, V low 0.8 V)  
Maximum Pixel Clock  
137 MHz  
Power Supply  
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz  
Signal Cable  
15pin - to - 15pin D-sub cable, Detachable  
Dimensions (W x H x D) / Weight (Simple Stand)  
451.0 x 331.7 x 72.4 mm / 17.8 x 13.1 x 2.9 inch (Without Stand)  
451.0 x 379.3 x 200.0 mm / 17.8 x 14.9 x 7.9 inch (With Stand), 4 kg / 10.7 lbs  
VESA Mounting Interface  
75.0 mm x 75.0 mm (For use with Specialty(Arm) Mounting hardware.)  
Environmental considerations  
Temperature : 50°F ~ 104°F (10°C ~ 40°C)  
Operating  
Humidity : 10 % ~ 80 %, non-condensing  
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Storage  
Humidity : 5 % ~ 95 %, non-condensing  
Plug and Play Capability  
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the  
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor  
installation will proceed automatically, unless the user wishes to select alternate settings.  
Dot Acceptable  
TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)  
above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright  
sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.  
Note  
Design and specifications are subject to change without prior notice.  
Class B Equipment (Information Communication equipment for residential use)  
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas  
including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PowerSaver  
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor  
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal  
operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or  
when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in  
your computer. Use the software utility installed on your computer to set up this feature.  
Power off (Power button)  
State  
Normal Operation  
Power saving mode  
EPA/ENERGY 2000  
Off  
Power Indicator  
ON  
Blinking  
Power Consumption  
34 watts  
Less than 1 watts  
®
Less than 1 watts  
This monitor is EPA ENERGY STAR compliant and ENERGY2000 compliant when used with  
a computer equipped with VESA DPM functionality.  
®
As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the  
®
ENERGY STAR guidelines for energy efficiency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Preset Timing Modes  
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted  
automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual  
and adjusts the screen as follows.  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency (Hz)  
Pixel Clock  
(MHz)  
Sync Polarity  
(H/V)  
Display Mode  
IBM, 720 x 400  
MAC, 640 x 480  
MAC, 832 x 624  
MAC, 1152 x 870  
VESA, 640 x 480  
VESA, 640 x 480  
VESA, 640 x 480  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1152 x 864  
VESA, 1280 x 800  
VESA, 1280 X 960  
VESA, 1280 X 1024  
VESA, 1280 X 1024  
VESA, 1440 X 900  
VESA, 1440 X 900  
31.469  
35.000  
49.726  
68.681  
31.469  
37.861  
37.500  
35.156  
37.879  
48.077  
46.875  
48.363  
56.476  
60.023  
67.500  
49.702  
60.000  
63.981  
79.976  
55.935  
70.635  
70.087  
66.667  
74.551  
75.062  
59.940  
72.809  
75.000  
56.250  
60.317  
72.188  
75.000  
60.004  
70.069  
75.029  
75.000  
59.810  
60.000  
60.020  
75.025  
59.887  
74.984  
28.322  
30.240  
57.284  
100.000  
25.175  
31.500  
31.500  
36.000  
40.000  
50.000  
49.500  
65.000  
75.000  
78.750  
108.000  
83.500  
108.000  
108.000  
135.000  
106.500  
136.750  
-/+  
-/-  
-/-  
-/-  
-/-  
-/-  
-/-  
+/+  
+/+  
+/+  
+/+  
-/-  
-/-  
+/+  
+/+  
+/+  
+/+  
+/+  
+/+  
-/+  
-/+  
Horizontal Frequency  
The time to scan one line connecting the right edge to the left edge of the  
screen horizontally is called the Horizontal Cycle and the inverse number of  
the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz  
Vertical Frequency  
Like a fluorescent lamp, the screen has to repeat the same image many times  
per second to display an image to the user. The frequency of this repetition is  
called the Vertical Frequency or Refresh Rate. Unit: Hz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
General  
Model Name  
LCD Panel  
Size  
SyncMaster 933NWPLUS  
19 inch (48 cm)  
Display area  
408.24 mm (H) x 255.15 mm (V)  
0.2835 mm (H) x 0.2835 mm (V)  
Pixel Pitch  
Synchronization  
Horizontal  
30 ~ 81 kHz  
56 ~ 75 Hz  
Vertical  
Display Color  
16.7M  
Resolution  
Optimum resolution  
1440 x 900@60 Hz  
1440 x 900@75 Hz  
Maximum resolution  
Input Signal, Terminated  
RGB Analog  
0.7 Vp-p ± 5 %  
Separate H/V sync, Composite, SOG  
TTL level (V high 2.0 V, V low 0.8 V)  
Maximum Pixel Clock  
137 MHz  
Power Supply  
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz  
Signal Cable  
15pin - to - 15pin D-sub cable, Detachable  
Dimensions (W x H x D) / Weight (Simple Stand)  
451.0 x 331.7 x 72.4 mm / 17.8 x 13.1 x 2.9 inch (Without Stand)  
451.0 x 379.3 x 200.0 mm / 17.8 x 14.9 x 7.9 inch (With Stand), 4 kg / 10.7 lbs  
VESA Mounting Interface  
75.0 mm x 75.0 mm (For use with Specialty(Arm) Mounting hardware.)  
Environmental considerations  
Temperature : 50°F ~ 104°F (10°C ~ 40°C)  
Operating  
Humidity : 10 % ~ 80 %, non-condensing  
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Storage  
Humidity : 5 % ~ 95 %, non-condensing  
Plug and Play Capability  
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the  
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor  
installation will proceed automatically, unless the user wishes to select alternate settings.  
Dot Acceptable  
TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)  
above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright  
sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.  
Note  
Design and specifications are subject to change without prior notice.  
Class B Equipment (Information Communication equipment for residential use)  
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas  
including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PowerSaver  
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor  
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal  
operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or  
when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in  
your computer. Use the software utility installed on your computer to set up this feature.  
Power off (Power button)  
State  
Normal Operation  
Power saving mode  
EPA/ENERGY 2000  
Off  
Power Indicator  
ON  
Blinking  
Power Consumption  
34 watts  
Less than 1 watts  
®
Less than 1 watts  
This monitor is EPA ENERGY STAR compliant and ENERGY2000 compliant when used with  
a computer equipped with VESA DPM functionality.  
®
As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the  
®
ENERGY STAR guidelines for energy efficiency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Preset Timing Modes  
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted  
automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual  
and adjusts the screen as follows.  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency (Hz)  
Pixel Clock  
(MHz)  
Sync Polarity  
(H/V)  
Display Mode  
IBM, 720 x 400  
MAC, 640 x 480  
MAC, 832 x 624  
MAC, 1152 x 870  
VESA, 640 x 480  
VESA, 640 x 480  
VESA, 640 x 480  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1152 x 864  
VESA, 1280 x 800  
VESA, 1280 X 960  
VESA, 1280 X 1024  
VESA, 1280 X 1024  
VESA, 1440 X 900  
VESA, 1440 X 900  
31.469  
35.000  
49.726  
68.681  
31.469  
37.861  
37.500  
35.156  
37.879  
48.077  
46.875  
48.363  
56.476  
60.023  
67.500  
49.702  
60.000  
63.981  
79.976  
55.935  
70.635  
70.087  
66.667  
74.551  
75.062  
59.940  
72.809  
75.000  
56.250  
60.317  
72.188  
75.000  
60.004  
70.069  
75.029  
75.000  
59.810  
60.000  
60.020  
75.025  
59.887  
74.984  
28.322  
30.240  
57.284  
100.000  
25.175  
31.500  
31.500  
36.000  
40.000  
50.000  
49.500  
65.000  
75.000  
78.750  
108.000  
83.500  
108.000  
108.000  
135.000  
106.500  
136.750  
-/+  
-/-  
-/-  
-/-  
-/-  
-/-  
-/-  
+/+  
+/+  
+/+  
+/+  
-/-  
-/-  
+/+  
+/+  
+/+  
+/+  
+/+  
+/+  
-/+  
-/+  
Horizontal Frequency  
The time to scan one line connecting the right edge to the left edge of the  
screen horizontally is called the Horizontal Cycle and the inverse number of  
the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz  
Vertical Frequency  
Like a fluorescent lamp, the screen has to repeat the same image many times  
per second to display an image to the user. The frequency of this repetition is  
called the Vertical Frequency or Refresh Rate. Unit: Hz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
General  
Model Name  
LCD Panel  
Size  
SyncMaster 933SN  
18.5 inch (47 cm)  
Display area  
409.8 mm (H) x 230.4 mm (V)  
0.3 mm (H) x 0.3 mm (V)  
Pixel Pitch  
Synchronization  
Horizontal  
31 ~ 80 kHz  
56 ~ 75 Hz  
Vertical  
Display Color  
16.7M  
Resolution  
Optimum resolution  
1360 x 768@60 Hz  
1360 x 768@60 Hz  
Maximum resolution  
Input Signal, Terminated  
RGB Analog  
0.7 Vp-p ± 5 %  
Separate H/V sync, Composite, SOG  
TTL level (V high 2.0 V, V low 0.8 V)  
Maximum Pixel Clock  
89 MHz  
Power Supply  
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz  
Signal Cable  
15pin - to - 15pin D-sub cable, Detachable  
Dimensions (W x H x D) / Weight (Simple Stand)  
453.3 x 299.3x 69.8 mm / 17.9 x 11.8x 2.8inch (Without Stand)  
453.3 x 354.9 x 176.6 mm / 17.9 x13.9 x 6.9 inch (With Stand), 3.65 kg / 9.8 lbs  
VESA Mounting Interface  
75.0 mm x 75.0 mm (For use with Specialty(Arm) Mounting hardware.)  
Environmental considerations  
Temperature : 50°F ~ 104°F (10°C ~ 40°C)  
Operating  
Humidity : 10 % ~ 80 %, non-condensing  
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Storage  
Humidity : 5 % ~ 95 %, non-condensing  
Plug and Play Capability  
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the  
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor  
installation will proceed automatically, unless the user wishes to select alternate settings.  
Dot Acceptable  
TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)  
above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright  
sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.  
Note  
Design and specifications are subject to change without prior notice.  
Class B Equipment (Information Communication equipment for residential use)  
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas  
including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PowerSaver  
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor  
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal  
operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or  
when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in  
your computer. Use the software utility installed on your computer to set up this feature.  
Power off (Power button)  
State  
Normal Operation  
Power saving mode  
EPA/ENERGY 2000  
Off  
Power Indicator  
ON  
Blinking  
Power Consumption  
18 watts  
Less than 1 watts  
®
Less than 1 watts  
This monitor is EPA ENERGY STAR compliant and ENERGY2000 compliant when used with  
a computer equipped with VESA DPM functionality.  
®
As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the  
®
ENERGY STAR guidelines for energy efficiency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Preset Timing Modes  
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted  
automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual  
and adjusts the screen as follows.  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency (Hz)  
Pixel Clock  
(MHz)  
Sync Polarity  
(H/V)  
Display Mode  
IBM, 720 x 400  
MAC, 640 x 480  
MAC, 832 x 624  
VESA, 640 x 480  
VESA, 640 x 480  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1360 X 768  
31.469  
35.000  
49.726  
37.861  
37.500  
35.156  
37.879  
48.077  
46.875  
48.363  
56.476  
60.023  
47.712  
70.087  
66.667  
74.551  
72.809  
75.000  
56.250  
60.317  
72.188  
75.000  
60.004  
70.069  
75.029  
60.000  
28.322  
30.240  
57.284  
31.500  
31.500  
36.000  
40.000  
50.000  
49.500  
65.000  
75.000  
78.750  
85.500  
-/+  
-/-  
-/-  
-/-  
-/-  
+/+  
+/+  
+/+  
+/+  
-/-  
-/-  
+/+  
+/+  
Horizontal Frequency  
The time to scan one line connecting the right edge to the left edge of the  
screen horizontally is called the Horizontal Cycle and the inverse number of  
the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz  
Vertical Frequency  
Like a fluorescent lamp, the screen has to repeat the same image many times  
per second to display an image to the user. The frequency of this repetition is  
called the Vertical Frequency or Refresh Rate. Unit: Hz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
General  
Model Name  
LCD Panel  
Size  
SyncMaster 933SNPLUS  
18.5 inch (47 cm)  
Display area  
409.8 mm (H) x 230.4 mm (V)  
0.3 mm (H) x 0.3 mm (V)  
Pixel Pitch  
Synchronization  
Horizontal  
31 ~ 80 kHz  
56 ~ 75 Hz  
Vertical  
Display Color  
16.7M  
Resolution  
Optimum resolution  
1360 x 768@60 Hz  
1360 x 768@60 Hz  
Maximum resolution  
Input Signal, Terminated  
RGB Analog  
0.7 Vp-p ± 5 %  
Separate H/V sync, Composite, SOG  
TTL level (V high 2.0 V, V low 0.8 V)  
Maximum Pixel Clock  
89 MHz  
Power Supply  
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz  
Signal Cable  
15pin - to - 15pin D-sub cable, Detachable  
Dimensions (W x H x D) / Weight (Simple Stand)  
453.3 x 299.3x 69.8 mm / 17.9 x 11.8x 2.8inch (Without Stand)  
453.3 x 354.9 x 176.6 mm / 17.9 x13.9 x 6.9 inch (With Stand), 3.65 kg / 9.8 lbs  
VESA Mounting Interface  
75.0 mm x 75.0 mm (For use with Specialty(Arm) Mounting hardware.)  
Environmental considerations  
Temperature : 50°F ~ 104°F (10°C ~ 40°C)  
Operating  
Humidity : 10 % ~ 80 %, non-condensing  
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Storage  
Humidity : 5 % ~ 95 %, non-condensing  
Plug and Play Capability  
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the  
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor  
installation will proceed automatically, unless the user wishes to select alternate settings.  
Dot Acceptable  
TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)  
above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright  
sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.  
Note  
Design and specifications are subject to change without prior notice.  
Class B Equipment (Information Communication equipment for residential use)  
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas  
including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PowerSaver  
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor  
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal  
operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or  
when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in  
your computer. Use the software utility installed on your computer to set up this feature.  
Power off (Power button)  
State  
Normal Operation  
Power saving mode  
EPA/ENERGY 2000  
Off  
Power Indicator  
ON  
Blinking  
Power Consumption  
18 watts  
Less than 1 watts  
®
Less than 1 watts  
This monitor is EPA ENERGY STAR compliant and ENERGY2000 compliant when used with  
a computer equipped with VESA DPM functionality.  
®
As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the  
®
ENERGY STAR guidelines for energy efficiency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Preset Timing Modes  
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted  
automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual  
and adjusts the screen as follows.  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency (Hz)  
Pixel Clock  
(MHz)  
Sync Polarity  
(H/V)  
Display Mode  
IBM, 720 x 400  
MAC, 640 x 480  
MAC, 832 x 624  
VESA, 640 x 480  
VESA, 640 x 480  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1360 X 768  
31.469  
35.000  
49.726  
37.861  
37.500  
35.156  
37.879  
48.077  
46.875  
48.363  
56.476  
60.023  
47.712  
70.087  
66.667  
74.551  
72.809  
75.000  
56.250  
60.317  
72.188  
75.000  
60.004  
70.069  
75.029  
60.000  
28.322  
30.240  
57.284  
31.500  
31.500  
36.000  
40.000  
50.000  
49.500  
65.000  
75.000  
78.750  
85.500  
-/+  
-/-  
-/-  
-/-  
-/-  
+/+  
+/+  
+/+  
+/+  
-/-  
-/-  
+/+  
+/+  
Horizontal Frequency  
The time to scan one line connecting the right edge to the left edge of the  
screen horizontally is called the Horizontal Cycle and the inverse number of  
the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz  
Vertical Frequency  
Like a fluorescent lamp, the screen has to repeat the same image many times  
per second to display an image to the user. The frequency of this repetition is  
called the Vertical Frequency or Refresh Rate. Unit: Hz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
General  
Model Name  
LCD Panel  
Size  
SyncMaster 2033SN  
20.0 inch (50 cm)  
Display area  
442.8 mm (H) x 249.075 mm (V)  
0.2768 mm (H) x 0.2768 mm (V)  
Pixel Pitch  
Synchronization  
Horizontal  
30 ~ 81kHz  
56 ~ 75 Hz  
Vertical  
Display Color  
16.7M  
Resolution  
Optimum resolution  
1600 x 900@60 Hz  
1600 x 900@60 Hz  
Maximum resolution  
Input Signal, Terminated  
RGB Analog,  
0.7 Vp-p ± 5 %  
Separate H/V sync, Composite, SOG  
TTL level (V high 2.0 V, V low 0.8 V)  
Maximum Pixel Clock  
150 MHz (Analog)  
Power Supply  
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz  
Signal Cable  
15pin - to - 15pin D-sub cable, Detachable  
Dimensions (W x H x D) / Weight (Simple Stand)  
485.8 x 325.9 x 72.6 mm(19.1 x 12.8 x 2.9 inch) (Without Stand)  
485.8 x 373.5 x 200 mm (19.1 x 14.7 x 7.9 inch) (With Stand) / 4.45 kg(9.8 lbs)  
VESA Mounting Interface  
100 mm x 100 mm (For use with Specialty(Arm) Mounting hardware.)  
Environmental considerations  
Temperature : 50°F ~ 104°F (10°C ~ 40°C)  
Operating  
Humidity : 10 % ~ 80 %, non-condensing  
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Storage  
Humidity : 5 % ~ 95 %, non-condensing  
Plug and Play Capability  
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the  
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor  
installation will proceed automatically, unless the user wishes to select alternate settings.  
Dot Acceptable  
TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)  
above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright  
sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.  
Note  
Design and specifications are subject to change without prior notice.  
Class B Equipment (Information Communication equipment for residential use)  
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas  
including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PowerSaver  
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor  
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal  
operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or  
when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in  
your computer. Use the software utility installed on your computer to set up this feature.  
Power off (Power button)  
State  
Normal Operation  
Power saving mode  
EPA/ENERGY 2000  
On  
Off  
Power Indicator  
Blinking  
Power Consumption  
40 watts  
Less than 1 watts  
®
Less than 1 watts  
This monitor is EPA ENERGY STAR compliant and ENERG Y2000 compliant when used with  
a computer equipped with VESA DPM functionality.  
®
As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the  
®
ENERGY STAR guidelines for energy efficiency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Preset Timing Modes  
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted  
automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual  
and adjusts the screen as follows.  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency (Hz)  
Pixel Clock  
(MHz)  
Sync Polarity  
(H/V)  
Display Mode  
IBM, 720 x 400  
MAC, 640 x 480  
MAC, 832 x 624  
MAC, 1152 x 870  
VESA, 640 x 480  
VESA, 640 x 480  
VESA, 640 x 480  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1152 x 864  
VESA, 1280 x 800  
VESA, 1280 x 800  
VESA, 1440 x 900  
VESA, 1440 x 900  
VESA, 1600 x 900  
31.469  
35.000  
49.726  
68.681  
31.469  
37.861  
37.500  
35.156  
37.879  
48.077  
46.875  
48.363  
56.476  
60.023  
67.500  
49.702  
62.795  
55.935  
70.635  
60.000  
70.087  
66.667  
74.551  
75.062  
59.940  
72.809  
75.000  
56.250  
60.317  
72.188  
75.000  
60.004  
70.069  
75.029  
75.000  
59.810  
74.934  
59.887  
74.984  
60.000  
28.322  
30.240  
57.284  
100.000  
25.175  
31.500  
31.500  
36.000  
40.000  
50.000  
49.500  
65.000  
75.000  
78.750  
108.000  
83.50  
-/+  
-/-  
-/-  
-/-  
-/-  
-/-  
-/-  
+/+  
+/+  
+/+  
+/+  
-/-  
-/-  
+/+  
+/+  
-/+  
-/+  
-/+  
-/+  
+/+  
106.500  
106.500  
136.750  
108.000  
Horizontal Frequency  
The time to scan one line connecting the right edge to the left edge of the  
screen horizontally is called the Horizontal Cycle and the inverse number of  
the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz  
Vertical Frequency  
Like a fluorescent lamp, the screen has to repeat the same image many times  
per second to display an image to the user. The frequency of this repetition is  
called the Vertical Frequency or Refresh Rate. Unit: Hz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
General  
Model Name  
LCD Panel  
Size  
SyncMaster 2033SNPLUS  
20.0 inch (50 cm)  
Display area  
442.8 mm (H) x 249.075 mm (V)  
0.2768 mm (H) x 0.2768 mm (V)  
Pixel Pitch  
Synchronization  
Horizontal  
30 ~ 81kHz  
56 ~ 75 Hz  
Vertical  
Display Color  
16.7M  
Resolution  
Optimum resolution  
1600 x 900@60 Hz  
1600 x 900@60 Hz  
Maximum resolution  
Input Signal, Terminated  
RGB Analog,  
0.7 Vp-p ± 5 %  
Separate H/V sync, Composite, SOG  
TTL level (V high 2.0 V, V low 0.8 V)  
Maximum Pixel Clock  
150 MHz (Analog)  
Power Supply  
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz  
Signal Cable  
15pin - to - 15pin D-sub cable, Detachable  
Dimensions (W x H x D) / Weight (Simple Stand)  
485.8 x 325.9 x 72.6 mm(19.1 x 12.8 x 2.9 inch) (Without Stand)  
485.8 x 373.5 x 200 mm (19.1 x 14.7 x 7.9 inch) (With Stand) / 4.45 kg(9.8 lbs)  
VESA Mounting Interface  
100 mm x 100 mm (For use with Specialty(Arm) Mounting hardware.)  
Environmental considerations  
Temperature : 50°F ~ 104°F (10°C ~ 40°C)  
Operating  
Humidity : 10 % ~ 80 %, non-condensing  
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Storage  
Humidity : 5 % ~ 95 %, non-condensing  
Plug and Play Capability  
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the  
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor  
installation will proceed automatically, unless the user wishes to select alternate settings.  
Dot Acceptable  
TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)  
above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright  
sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.  
Note  
Design and specifications are subject to change without prior notice.  
Class B Equipment (Information Communication equipment for residential use)  
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas  
including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PowerSaver  
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor  
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal  
operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or  
when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in  
your computer. Use the software utility installed on your computer to set up this feature.  
Power off (Power button)  
State  
Normal Operation  
Power saving mode  
EPA/ENERGY 2000  
On  
Off  
Power Indicator  
Blinking  
Power Consumption  
40 watts  
Less than 1 watts  
®
Less than 1 watts  
This monitor is EPA ENERGY STAR compliant and ENERG Y2000 compliant when used with  
a computer equipped with VESA DPM functionality.  
®
As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the  
®
ENERGY STAR guidelines for energy efficiency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Preset Timing Modes  
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted  
automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual  
and adjusts the screen as follows.  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency (Hz)  
Pixel Clock  
(MHz)  
Sync Polarity  
(H/V)  
Display Mode  
IBM, 720 x 400  
MAC, 640 x 480  
MAC, 832 x 624  
MAC, 1152 x 870  
VESA, 640 x 480  
VESA, 640 x 480  
VESA, 640 x 480  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1152 x 864  
VESA, 1280 x 800  
VESA, 1280 x 800  
VESA, 1440 x 900  
VESA, 1440 x 900  
VESA, 1600 x 900  
31.469  
35.000  
49.726  
68.681  
31.469  
37.861  
37.500  
35.156  
37.879  
48.077  
46.875  
48.363  
56.476  
60.023  
67.500  
49.702  
62.795  
55.935  
70.635  
60.000  
70.087  
66.667  
74.551  
75.062  
59.940  
72.809  
75.000  
56.250  
60.317  
72.188  
75.000  
60.004  
70.069  
75.029  
75.000  
59.810  
74.934  
59.887  
74.984  
60.000  
28.322  
30.240  
57.284  
100.000  
25.175  
31.500  
31.500  
36.000  
40.000  
50.000  
49.500  
65.000  
75.000  
78.750  
108.000  
83.50  
-/+  
-/-  
-/-  
-/-  
-/-  
-/-  
-/-  
+/+  
+/+  
+/+  
+/+  
-/-  
-/-  
+/+  
+/+  
-/+  
-/+  
-/+  
-/+  
+/+  
106.500  
106.500  
136.750  
108.000  
Horizontal Frequency  
The time to scan one line connecting the right edge to the left edge of the  
screen horizontally is called the Horizontal Cycle and the inverse number of  
the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz  
Vertical Frequency  
Like a fluorescent lamp, the screen has to repeat the same image many times  
per second to display an image to the user. The frequency of this repetition is  
called the Vertical Frequency or Refresh Rate. Unit: Hz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
General  
Model Name  
LCD Panel  
Size  
SyncMaster 2033SW  
20 inch (50 cm)  
Display area  
442.8 mm (H) x 249.075 mm (V)  
0.2768 mm (H) x 0.2768 mm (V)  
Pixel Pitch  
Synchronization  
Horizontal  
30 ~ 81 kHz  
56 ~ 75 Hz  
Vertical  
Display Color  
16.7M  
Resolution  
Optimum resolution  
1600 x 900@60 Hz  
1600 x 900@60 Hz  
Maximum resolution  
Input Signal, Terminated  
RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB  
0.7 Vp-p ± 5 %  
Separate H/V sync, Composite, SOG  
TTL level (V high 2.0 V, V low 0.8 V)  
Maximum Pixel Clock  
150 MHz (Analog, Digital)  
Power Supply  
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz  
Signal Cable  
15pin - to - 15pin D-sub cable, Detachable, 1.5m  
DVI-D to DVI-D connector, Detachable, 1.5m  
Dimensions (W x H x D) / Weight (Simple Stand)  
485.8 x 325.9 x 72.6 mm (19.1 x 12.8 x 2.9 inch) (Without Stand)  
485.8 x 373.5 x 200 mm (19.1 x 14.7 x 7.9 inch) (With Stand) / 4.45 kg(9.8 lbs)  
VESA Mounting Interface  
100 mm x 100 mm (For use with Specialty(Arm) Mounting hardware.)  
Environmental considerations  
Temperature : 50°F ~ 104°F (10°C ~ 40°C)  
Operating  
Humidity : 10 % ~ 80 %, non-condensing  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)  
Humidity : 5 % ~ 95 %, non-condensing  
Storage  
Plug and Play Capability  
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the  
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor  
installation will proceed automatically, unless the user wishes to select alternate settings.  
Dot Acceptable  
TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)  
above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright  
sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.  
Note  
Design and specifications are subject to change without prior notice.  
Class B Equipment (Information Communication equipment for residential use)  
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas  
including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PowerSaver  
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor  
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal  
operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or  
when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in  
your computer. Use the software utility installed on your computer to set up this feature.  
Power off (Power button)  
State  
Normal Operation  
Power saving mode  
EPA/ENERGY 2000  
On  
Off  
Power Indicator  
Blinking  
Power Consumption  
40 watts  
Less than 1 watts  
®
Less than 1 watts  
This monitor is EPA ENERGY STAR compliant and ENERGY 2000 compliant when used with  
a computer equipped with VESA DPM functionality.  
®
As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the  
®
ENERGY STAR guidelines for energy efficiency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Preset Timing Modes  
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted  
automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual  
and adjusts the screen as follows.  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency (Hz)  
Pixel Clock  
(MHz)  
Sync Polarity  
(H/V)  
Display Mode  
IBM, 720 x 400  
MAC, 640 x 480  
MAC, 832 x 624  
MAC, 1152 x 870  
VESA, 640 x 480  
VESA, 640 x 480  
VESA, 640 x 480  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1152 x 864  
VESA, 1280 x 800  
VESA, 1280 x 800  
VESA, 1440 x 900  
VESA, 1440 x 900  
VESA, 1600 x 900  
31.469  
35.000  
49.726  
68.681  
31.469  
37.861  
37.500  
35.156  
37.879  
48.077  
46.875  
48.363  
56.476  
60.023  
67.500  
49.702  
62.795  
55.935  
70.635  
60.000  
70.087  
66.667  
74.551  
75.062  
59.940  
72.809  
75.000  
56.250  
60.317  
72.188  
75.000  
60.004  
70.069  
75.029  
75.000  
59.810  
74.934  
59.887  
74.984  
60.000  
28.322  
30.240  
57.284  
100.000  
25.175  
31.500  
31.500  
36.000  
40.000  
50.000  
49.500  
65.000  
75.000  
78.750  
108.000  
83.50  
-/+  
-/-  
-/-  
-/-  
-/-  
-/-  
-/-  
+/+  
+/+  
+/+  
+/+  
-/-  
-/-  
+/+  
+/+  
-/+  
-/+  
-/+  
-/+  
+/+  
106.500  
106.500  
136.750  
108.000  
Horizontal Frequency  
The time to scan one line connecting the right edge to the left edge of the  
screen horizontally is called the Horizontal Cycle and the inverse number of  
the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz  
Vertical Frequency  
Like a fluorescent lamp, the screen has to repeat the same image many times  
per second to display an image to the user. The frequency of this repetition is  
called the Vertical Frequency or Refresh Rate. Unit: Hz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
General  
Model Name  
LCD Panel  
Size  
SyncMaster 2033SWPLUS  
20 inch (50 cm)  
Display area  
442.8 mm (H) x 249.075 mm (V)  
0.2768 mm (H) x 0.2768 mm (V)  
Pixel Pitch  
Synchronization  
Horizontal  
30 ~ 81 kHz  
56 ~ 75 Hz  
Vertical  
Display Color  
16.7M  
Resolution  
Optimum resolution  
1600 x 900@60 Hz  
1600 x 900@60 Hz  
Maximum resolution  
Input Signal, Terminated  
RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB  
0.7 Vp-p ± 5 %  
Separate H/V sync, Composite, SOG  
TTL level (V high 2.0 V, V low 0.8 V)  
Maximum Pixel Clock  
150 MHz (Analog, Digital)  
Power Supply  
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz  
Signal Cable  
15pin - to - 15pin D-sub cable, Detachable, 1.5m  
DVI-D to DVI-D connector, Detachable, 1.5m  
Dimensions (W x H x D) / Weight (Simple Stand)  
485.8 x 325.9 x 72.6 mm (19.1 x 12.8 x 2.9 inch) (Without Stand)  
485.8 x 373.5 x 200 mm (19.1 x 14.7 x 7.9 inch) (With Stand) / 4.45 kg(9.8 lbs)  
VESA Mounting Interface  
100 mm x 100 mm (For use with Specialty(Arm) Mounting hardware.)  
Environmental considerations  
Temperature : 50°F ~ 104°F (10°C ~ 40°C)  
Operating  
Humidity : 10 % ~ 80 %, non-condensing  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)  
Humidity : 5 % ~ 95 %, non-condensing  
Storage  
Plug and Play Capability  
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the  
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor  
installation will proceed automatically, unless the user wishes to select alternate settings.  
Dot Acceptable  
TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)  
above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright  
sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.  
Note  
Design and specifications are subject to change without prior notice.  
Class B Equipment (Information Communication equipment for residential use)  
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas  
including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PowerSaver  
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor  
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal  
operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or  
when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in  
your computer. Use the software utility installed on your computer to set up this feature.  
Power off (Power button)  
State  
Normal Operation  
Power saving mode  
EPA/ENERGY 2000  
On  
Off  
Power Indicator  
Blinking  
Power Consumption  
40 watts  
Less than 1 watts  
®
Less than 1 watts  
This monitor is EPA ENERGY STAR compliant and ENERGY 2000 compliant when used with  
a computer equipped with VESA DPM functionality.  
®
As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the  
®
ENERGY STAR guidelines for energy efficiency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Preset Timing Modes  
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted  
automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual  
and adjusts the screen as follows.  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency (Hz)  
Pixel Clock  
(MHz)  
Sync Polarity  
(H/V)  
Display Mode  
IBM, 720 x 400  
MAC, 640 x 480  
MAC, 832 x 624  
MAC, 1152 x 870  
VESA, 640 x 480  
VESA, 640 x 480  
VESA, 640 x 480  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1152 x 864  
VESA, 1280 x 800  
VESA, 1280 x 800  
VESA, 1440 x 900  
VESA, 1440 x 900  
VESA, 1600 x 900  
31.469  
35.000  
49.726  
68.681  
31.469  
37.861  
37.500  
35.156  
37.879  
48.077  
46.875  
48.363  
56.476  
60.023  
67.500  
49.702  
62.795  
55.935  
70.635  
60.000  
70.087  
66.667  
74.551  
75.062  
59.940  
72.809  
75.000  
56.250  
60.317  
72.188  
75.000  
60.004  
70.069  
75.029  
75.000  
59.810  
74.934  
59.887  
74.984  
60.000  
28.322  
30.240  
57.284  
100.000  
25.175  
31.500  
31.500  
36.000  
40.000  
50.000  
49.500  
65.000  
75.000  
78.750  
108.000  
83.50  
-/+  
-/-  
-/-  
-/-  
-/-  
-/-  
-/-  
+/+  
+/+  
+/+  
+/+  
-/-  
-/-  
+/+  
+/+  
-/+  
-/+  
-/+  
-/+  
+/+  
106.500  
106.500  
136.750  
108.000  
Horizontal Frequency  
The time to scan one line connecting the right edge to the left edge of the  
screen horizontally is called the Horizontal Cycle and the inverse number of  
the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz  
Vertical Frequency  
Like a fluorescent lamp, the screen has to repeat the same image many times  
per second to display an image to the user. The frequency of this repetition is  
called the Vertical Frequency or Refresh Rate. Unit: Hz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
General  
Model Name  
LCD Panel  
Size  
SyncMaster 2233BW  
22 inch (55 cm)  
Display area  
473.76 mm (H) x 296.1 mm (V)  
0.282 mm (H) x 0.282 mm (V)  
Pixel Pitch  
Synchronization  
Horizontal  
30 ~ 81 kHz  
56 ~ 75 Hz  
Vertical  
Display Color  
16.7M  
Resolution  
Optimum resolution  
1680 x 1050@60 Hz  
1680 x 1050@60 Hz  
Maximum resolution  
Input Signal, Terminated  
RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB  
0.7 Vp-p ± 5 %  
Separate H/V sync, Composite, SOG  
TTL level (V high 2.0 V, V low 0.8 V)  
Maximum Pixel Clock  
146 MHz (Analog, Digital)  
Power Supply  
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz  
Signal Cable  
15pin - to - 15pin D-sub cable, Detachable  
DVI-D to DVI-D connector, Detachable  
Dimensions (W x H x D) / Weight (Simple Stand)  
516.8 x 372.7 x 71.2 mm / 20.3 x 14.7 x 2.8 inch (Without Stand)  
516.8 x 421.3 x 208.7 mm / 20.3 x 16.6 x 8.2 inch (With Stand), 4.7 kg / 10.4 lbs  
VESA Mounting Interface  
100 mm x 100 mm (For use with Specialty(Arm) Mounting hardware.)  
Environmental considerations  
Temperature : 50°F ~ 104°F (10°C ~ 40°C)  
Operating  
Humidity : 10 % ~ 80 %, non-condensing  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)  
Humidity : 5 % ~ 95 %, non-condensing  
Storage  
Plug and Play Capability  
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the  
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor  
installation will proceed automatically, unless the user wishes to select alternate settings.  
Dot Acceptable  
TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)  
above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright  
sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.  
Note  
Design and specifications are subject to change without prior notice.  
Class B Equipment (Information Communication equipment for residential use)  
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas  
including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PowerSaver  
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor  
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal  
operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or  
when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in  
your computer. Use the software utility installed on your computer to set up this feature.  
Power off (Power button)  
State  
Normal Operation  
Power saving mode  
EPA/ENERGY 2000  
On  
Off  
Power Indicator  
Blinking  
Power Consumption  
45 watts  
Less than 1 watts  
®
Less than 1 watts  
This monitor is EPA ENERGY STAR compliant and ENERGY 2000 compliant when used with  
a computer equipped with VESA DPM functionality.  
®
As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the  
®
ENERGY STAR guidelines for energy efficiency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Preset Timing Modes  
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted  
automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual  
and adjusts the screen as follows.  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency (Hz)  
Pixel Clock  
(MHz)  
Sync Polarity  
(H/V)  
Display Mode  
IBM, 720 x 400  
MAC, 640 x 480  
MAC, 832 x 624  
MAC, 1152 x 870  
VESA, 640 x 480  
VESA, 640 x 480  
VESA, 640 x 480  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1152 x 864  
VESA, 1280 x 800  
VESA, 1280 x 960  
VESA, 1280 x 1024  
VESA, 1280 x 1024  
VESA, 1440 x 900  
VESA, 1440 x 900  
VESA, 1680 x 1050  
31.469  
35.000  
49.726  
68.681  
31.469  
37.861  
37.500  
35.156  
37.879  
48.077  
46.875  
48.363  
56.476  
60.023  
67.500  
49.702  
60.000  
63.981  
79.976  
55.935  
70.635  
65.290  
70.087  
66.667  
74.551  
75.062  
59.94  
28.322  
30.240  
57.284  
100.000  
25.175  
31.500  
31.500  
36.000  
40.000  
50.000  
49.500  
65.000  
75.000  
78.750  
108.000  
83.500  
108.000  
108.000  
135.000  
106.500  
136.750  
146.250  
-/+  
-/-  
-/-  
-/-  
-/-  
72.809  
75.000  
56.250  
60.317  
72.188  
75.000  
60.004  
70.069  
75.029  
75.000  
59.810  
60.000  
60.020  
75.025  
59.887  
74.984  
59.954  
-/-  
-/-  
+/+  
+/+  
+/+  
+/+  
-/-  
-/-  
+/+  
+/+  
-/+  
+/+  
+/+  
+/+  
-/+  
-/+  
-/+  
Horizontal Frequency  
The time to scan one line connecting the right edge to the left edge of the  
screen horizontally is called the Horizontal Cycle and the inverse number of  
the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz  
Vertical Frequency  
Like a fluorescent lamp, the screen has to repeat the same image many times  
per second to display an image to the user. The frequency of this repetition is  
called the Vertical Frequency or Refresh Rate. Unit: Hz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
General  
Model Name  
LCD Panel  
Size  
SyncMaster 2233BWPLUS  
22 inch (55 cm)  
Display area  
473.76 mm (H) x 296.1 mm (V)  
0.282 mm (H) x 0.282 mm (V)  
Pixel Pitch  
Synchronization  
Horizontal  
30 ~ 81 kHz  
56 ~ 75 Hz  
Vertical  
Display Color  
16.7M  
Resolution  
Optimum resolution  
1680 x 1050@60 Hz  
1680 x 1050@60 Hz  
Maximum resolution  
Input Signal, Terminated  
RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB  
0.7 Vp-p ± 5 %  
Separate H/V sync, Composite, SOG  
TTL level (V high 2.0 V, V low 0.8 V)  
Maximum Pixel Clock  
146 MHz (Analog, Digital)  
Power Supply  
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz  
Signal Cable  
15pin - to - 15pin D-sub cable, Detachable  
DVI-D to DVI-D connector, Detachable  
Dimensions (W x H x D) / Weight (Simple Stand)  
516.8 x 372.7 x 71.2 mm / 20.3 x 14.7 x 2.8 inch (Without Stand)  
516.8 x 421.3 x 208.7 mm / 20.3 x 16.6 x 8.2 inch (With Stand), 4.7 kg / 10.4 lbs  
VESA Mounting Interface  
100 mm x 100 mm (For use with Specialty(Arm) Mounting hardware.)  
Environmental considerations  
Temperature : 50°F ~ 104°F (10°C ~ 40°C)  
Operating  
Humidity : 10 % ~ 80 %, non-condensing  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)  
Humidity : 5 % ~ 95 %, non-condensing  
Storage  
Plug and Play Capability  
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the  
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor  
installation will proceed automatically, unless the user wishes to select alternate settings.  
Dot Acceptable  
TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)  
above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright  
sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.  
Note  
Design and specifications are subject to change without prior notice.  
Class B Equipment (Information Communication equipment for residential use)  
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas  
including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PowerSaver  
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor  
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal  
operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or  
when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in  
your computer. Use the software utility installed on your computer to set up this feature.  
Power off (Power button)  
State  
Normal Operation  
Power saving mode  
EPA/ENERGY 2000  
On  
Off  
Power Indicator  
Blinking  
Power Consumption  
45 watts  
Less than 1 watts  
®
Less than 1 watts  
This monitor is EPA ENERGY STAR compliant and ENERGY 2000 compliant when used with  
a computer equipped with VESA DPM functionality.  
®
As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the  
®
ENERGY STAR guidelines for energy efficiency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Preset Timing Modes  
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted  
automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual  
and adjusts the screen as follows.  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency (Hz)  
Pixel Clock  
(MHz)  
Sync Polarity  
(H/V)  
Display Mode  
IBM, 720 x 400  
MAC, 640 x 480  
MAC, 832 x 624  
MAC, 1152 x 870  
VESA, 640 x 480  
VESA, 640 x 480  
VESA, 640 x 480  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1152 x 864  
VESA, 1280 x 800  
VESA, 1280 x 960  
VESA, 1280 x 1024  
VESA, 1280 x 1024  
VESA, 1440 x 900  
VESA, 1440 x 900  
VESA, 1680 x 1050  
31.469  
35.000  
49.726  
68.681  
31.469  
37.861  
37.500  
35.156  
37.879  
48.077  
46.875  
48.363  
56.476  
60.023  
67.500  
49.702  
60.000  
63.981  
79.976  
55.935  
70.635  
65.290  
70.087  
66.667  
74.551  
75.062  
59.94  
28.322  
30.240  
57.284  
100.000  
25.175  
31.500  
31.500  
36.000  
40.000  
50.000  
49.500  
65.000  
75.000  
78.750  
108.000  
83.500  
108.000  
108.000  
135.000  
106.500  
136.750  
146.250  
-/+  
-/-  
-/-  
-/-  
-/-  
72.809  
75.000  
56.250  
60.317  
72.188  
75.000  
60.004  
70.069  
75.029  
75.000  
59.810  
60.000  
60.020  
75.025  
59.887  
74.984  
59.954  
-/-  
-/-  
+/+  
+/+  
+/+  
+/+  
-/-  
-/-  
+/+  
+/+  
-/+  
+/+  
+/+  
+/+  
-/+  
-/+  
-/+  
Horizontal Frequency  
The time to scan one line connecting the right edge to the left edge of the  
screen horizontally is called the Horizontal Cycle and the inverse number of  
the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz  
Vertical Frequency  
Like a fluorescent lamp, the screen has to repeat the same image many times  
per second to display an image to the user. The frequency of this repetition is  
called the Vertical Frequency or Refresh Rate. Unit: Hz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
General  
Model Name  
LCD Panel  
Size  
SyncMaster 2233GW  
22 inch (55 cm)  
Display area  
473.76 mm (H) x 296.1 mm (V)  
0.282 mm (H) x 0.282 mm (V)  
Pixel Pitch  
Synchronization  
Horizontal  
30 ~ 81 kHz  
56 ~ 75 Hz  
Vertical  
Display Color  
16.7M  
Resolution  
Optimum resolution  
1680 x 1050@60 Hz  
1680 x 1050@60 Hz  
Maximum resolution  
Input Signal, Terminated  
RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB  
0.7 Vp-p ± 5 %  
Separate H/V sync, Composite, SOG  
TTL level (V high 2.0 V, V low 0.8 V)  
Maximum Pixel Clock  
146 MHz (Analog, Digital)  
Power Supply  
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz  
Signal Cable  
15pin - to - 15pin D-sub cable, Detachable  
DVI-D to DVI-D connector, Detachable  
Dimensions (W x H x D) / Weight (Simple Stand)  
516.8 x 372.7 x 71.2 mm / 20.3 x 14.7 x 2.8 inch (Without Stand)  
516.8 x 421.3 x 208.7 mm / 20.3 x 16.6 x 8.2 inch (With Stand), 4.7 kg / 10.4 lbs  
VESA Mounting Interface  
100 mm x 100 mm (For use with Specialty(Arm) Mounting hardware.)  
Environmental considerations  
Temperature : 50°F ~ 104°F (10°C ~ 40°C)  
Operating  
Humidity : 10 % ~ 80 %, non-condensing  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)  
Humidity : 5 % ~ 95 %, non-condensing  
Storage  
Plug and Play Capability  
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the  
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor  
installation will proceed automatically, unless the user wishes to select alternate settings.  
Dot Acceptable  
TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)  
above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright  
sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.  
Note  
Design and specifications are subject to change without prior notice.  
Class B Equipment (Information Communication equipment for residential use)  
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas  
including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PowerSaver  
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor  
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal  
operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or  
when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in  
your computer. Use the software utility installed on your computer to set up this feature.  
Power off (Power button)  
State  
Normal Operation  
Power saving mode  
EPA/ENERGY 2000  
Off  
Power Indicator  
On  
Blinking  
Power Consumption  
45 watts  
Less than 1 watts  
®
Less than 1 watts  
This monitor is EPA ENERGY STAR compliant and ENERGY 2000 compliant when used with  
a computer equipped with VESA DPM functionality.  
®
As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the  
®
ENERGY STAR guidelines for energy efficiency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Preset Timing Modes  
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted  
automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual  
and adjusts the screen as follows.  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency (Hz)  
Pixel Clock  
(MHz)  
Sync Polarity  
(H/V)  
Display Mode  
IBM, 720 x 400  
MAC, 640 x 480  
MAC, 832 x 624  
MAC, 1152 x 870  
VESA, 640 x 480  
VESA, 640 x 480  
VESA, 640 x 480  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1152 x 864  
VESA, 1280 x 800  
VESA, 1280 x 960  
VESA, 1280 x 1024  
VESA, 1280 x 1024  
VESA, 1440 x 900  
VESA, 1440 x 900  
VESA, 1680 x 1050  
31.469  
35.000  
49.726  
68.681  
31.469  
37.861  
37.500  
35.156  
37.879  
48.077  
46.875  
48.363  
56.476  
60.023  
67.500  
49.702  
60.000  
63.981  
79.976  
55.935  
70.635  
65.290  
70.087  
66.667  
74.551  
75.062  
59.94  
28.322  
30.240  
57.284  
100.000  
25.175  
31.500  
31.500  
36.000  
40.000  
50.000  
49.500  
65.000  
75.000  
78.750  
108.000  
83.500  
108.000  
108.000  
135.000  
106.500  
136.750  
146.250  
-/+  
-/-  
-/-  
-/-  
-/-  
72.809  
75.000  
56.250  
60.317  
72.188  
75.000  
60.004  
70.069  
75.029  
75.000  
59.810  
60.000  
60.020  
75.025  
59.887  
74.984  
59.954  
-/-  
-/-  
+/+  
+/+  
+/+  
+/+  
-/-  
-/-  
+/+  
+/+  
-/+  
+/+  
+/+  
+/+  
-/+  
-/+  
-/+  
Horizontal Frequency  
The time to scan one line connecting the right edge to the left edge of the  
screen horizontally is called the Horizontal Cycle and the inverse number of  
the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz  
Vertical Frequency  
Like a fluorescent lamp, the screen has to repeat the same image many times  
per second to display an image to the user. The frequency of this repetition is  
called the Vertical Frequency or Refresh Rate. Unit: Hz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
General  
Model Name  
LCD Panel  
Size  
SyncMaster 2233GWPLUS  
22 inch (55 cm)  
Display area  
473.76 mm (H) x 296.1 mm (V)  
0.282 mm (H) x 0.282 mm (V)  
Pixel Pitch  
Synchronization  
Horizontal  
30 ~ 81 kHz  
56 ~ 75 Hz  
Vertical  
Display Color  
16.7M  
Resolution  
Optimum resolution  
1680 x 1050@60 Hz  
1680 x 1050@60 Hz  
Maximum resolution  
Input Signal, Terminated  
RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB  
0.7 Vp-p ± 5 %  
Separate H/V sync, Composite, SOG  
TTL level (V high 2.0 V, V low 0.8 V)  
Maximum Pixel Clock  
146 MHz (Analog, Digital)  
Power Supply  
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz  
Signal Cable  
15pin - to - 15pin D-sub cable, Detachable  
DVI-D to DVI-D connector, Detachable  
Dimensions (W x H x D) / Weight (Simple Stand)  
516.8 x 372.7 x 71.2 mm / 20.3 x 14.7 x 2.8 inch (Without Stand)  
516.8 x 421.3 x 208.7 mm / 20.3 x 16.6 x 8.2 inch (With Stand), 4.7 kg / 10.4 lbs  
VESA Mounting Interface  
100 mm x 100 mm (For use with Specialty(Arm) Mounting hardware.)  
Environmental considerations  
Temperature : 50°F ~ 104°F (10°C ~ 40°C)  
Operating  
Humidity : 10 % ~ 80 %, non-condensing  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)  
Humidity : 5 % ~ 95 %, non-condensing  
Storage  
Plug and Play Capability  
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the  
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor  
installation will proceed automatically, unless the user wishes to select alternate settings.  
Dot Acceptable  
TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)  
above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright  
sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.  
Note  
Design and specifications are subject to change without prior notice.  
Class B Equipment (Information Communication equipment for residential use)  
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas  
including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PowerSaver  
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor  
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal  
operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or  
when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in  
your computer. Use the software utility installed on your computer to set up this feature.  
Power off (Power button)  
State  
Normal Operation  
Power saving mode  
EPA/ENERGY 2000  
Off  
Power Indicator  
On  
Blinking  
Power Consumption  
45 watts  
Less than 1 watts  
®
Less than 1 watts  
This monitor is EPA ENERGY STAR compliant and ENERGY 2000 compliant when used with  
a computer equipped with VESA DPM functionality.  
®
As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the  
®
ENERGY STAR guidelines for energy efficiency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Preset Timing Modes  
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted  
automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual  
and adjusts the screen as follows.  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency (Hz)  
Pixel Clock  
(MHz)  
Sync Polarity  
(H/V)  
Display Mode  
IBM, 720 x 400  
MAC, 640 x 480  
MAC, 832 x 624  
MAC, 1152 x 870  
VESA, 640 x 480  
VESA, 640 x 480  
VESA, 640 x 480  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1152 x 864  
VESA, 1280 x 800  
VESA, 1280 x 960  
VESA, 1280 x 1024  
VESA, 1280 x 1024  
VESA, 1440 x 900  
VESA, 1440 x 900  
VESA, 1680 x 1050  
31.469  
35.000  
49.726  
68.681  
31.469  
37.861  
37.500  
35.156  
37.879  
48.077  
46.875  
48.363  
56.476  
60.023  
67.500  
49.702  
60.000  
63.981  
79.976  
55.935  
70.635  
65.290  
70.087  
66.667  
74.551  
75.062  
59.94  
28.322  
30.240  
57.284  
100.000  
25.175  
31.500  
31.500  
36.000  
40.000  
50.000  
49.500  
65.000  
75.000  
78.750  
108.000  
83.500  
108.000  
108.000  
135.000  
106.500  
136.750  
146.250  
-/+  
-/-  
-/-  
-/-  
-/-  
72.809  
75.000  
56.250  
60.317  
72.188  
75.000  
60.004  
70.069  
75.029  
75.000  
59.810  
60.000  
60.020  
75.025  
59.887  
74.984  
59.954  
-/-  
-/-  
+/+  
+/+  
+/+  
+/+  
-/-  
-/-  
+/+  
+/+  
-/+  
+/+  
+/+  
+/+  
-/+  
-/+  
-/+  
Horizontal Frequency  
The time to scan one line connecting the right edge to the left edge of the  
screen horizontally is called the Horizontal Cycle and the inverse number of  
the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz  
Vertical Frequency  
Like a fluorescent lamp, the screen has to repeat the same image many times  
per second to display an image to the user. The frequency of this repetition is  
called the Vertical Frequency or Refresh Rate. Unit: Hz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
General  
Model Name  
LCD Panel  
Size  
SyncMaster 2233NW  
22 inch (55 cm)  
Display area  
473.76 mm (H) x 296.1 mm (V)  
0.282 mm (H) x 0.282 mm (V)  
Pixel Pitch  
Synchronization  
Horizontal  
30 ~ 81 kHz  
56 ~ 75 Hz  
Vertical  
Display Color  
16.7M  
Resolution  
Optimum resolution  
1680 x 1050@60 Hz  
1680 x 1050@60 Hz  
Maximum resolution  
Input Signal, Terminated  
RGB Analog,  
0.7 Vp-p ± 5 %  
Separate H/V sync, Composite, SOG  
TTL level (V high 2.0 V, V low 0.8 V)  
Maximum Pixel Clock  
146 MHz (Analog)  
Power Supply  
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz  
Signal Cable  
15pin - to - 15pin D-sub cable, Detachable  
Dimensions (W x H x D) / Weight (Simple Stand)  
516.8 x 372.7 x 71.2 mm / 20.3 x 14.7 x 2.8 inch (Without Stand)  
516.8 x 421.3 x 208.7 mm / 20.3 x 16.6 x 8.2 inch (With Stand), 4.7 kg / 10.4 lbs  
VESA Mounting Interface  
100 mm x 100 mm (For use with Specialty(Arm) Mounting hardware.)  
Environmental considerations  
Temperature : 50°F ~ 104°F (10°C ~ 40°C)  
Operating  
Humidity : 10 % ~ 80 %, non-condensing  
Storage  
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Humidity : 5 % ~ 95 %, non-condensing  
Plug and Play Capability  
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the  
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor  
installation will proceed automatically, unless the user wishes to select alternate settings.  
Dot Acceptable  
TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)  
above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright  
sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.  
Note  
Design and specifications are subject to change without prior notice.  
Class B Equipment (Information Communication equipment for residential use)  
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas  
including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PowerSaver  
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor  
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal  
operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or  
when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in  
your computer. Use the software utility installed on your computer to set up this feature.  
Power off (Power button)  
State  
Normal Operation  
Power saving mode  
EPA/ENERGY 2000  
Power Indicator  
On  
Blinking  
Off  
Power Consumption  
45 watts  
Less than 1 watts  
®
Less than 1 watts  
This monitor is EPA ENERGY STAR compliant and ENERGY 2000 compliant when used with  
a computer equipped with VESA DPM functionality.  
®
As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the  
®
ENERGY STAR guidelines for energy efficiency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Preset Timing Modes  
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted  
automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual  
and adjusts the screen as follows.  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency (Hz)  
Pixel Clock  
(MHz)  
Sync Polarity  
(H/V)  
Display Mode  
IBM, 720 x 400  
MAC, 640 x 480  
MAC, 832 x 624  
MAC, 1152 x 870  
VESA, 640 x 480  
VESA, 640 x 480  
VESA, 640 x 480  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1152 x 864  
VESA, 1280 x 800  
VESA, 1280 x 960  
VESA, 1280 x 1024  
VESA, 1280 x 1024  
VESA, 1440 x 900  
VESA, 1440 x 900  
VESA, 1680 x 1050  
31.469  
35.000  
49.726  
68.681  
31.469  
37.861  
37.500  
35.156  
37.879  
48.077  
46.875  
48.363  
56.476  
60.023  
67.500  
49.702  
60.000  
63.981  
79.976  
55.935  
70.635  
65.290  
70.087  
66.667  
74.551  
75.062  
59.94  
28.322  
30.240  
57.284  
100.000  
25.175  
31.500  
31.500  
36.000  
40.000  
50.000  
49.500  
65.000  
75.000  
78.750  
108.000  
83.500  
108.000  
108.000  
135.000  
106.500  
136.750  
146.250  
-/+  
-/-  
-/-  
-/-  
-/-  
72.809  
75.000  
56.250  
60.317  
72.188  
75.000  
60.004  
70.069  
75.029  
75.000  
59.810  
60.000  
60.020  
75.025  
59.887  
74.984  
59.954  
-/-  
-/-  
+/+  
+/+  
+/+  
+/+  
-/-  
-/-  
+/+  
+/+  
-/+  
+/+  
+/+  
+/+  
-/+  
-/+  
-/+  
Horizontal Frequency  
The time to scan one line connecting the right edge to the left edge of the  
screen horizontally is called the Horizontal Cycle and the inverse number of  
the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz  
Vertical Frequency  
Like a fluorescent lamp, the screen has to repeat the same image many times  
per second to display an image to the user. The frequency of this repetition is  
called the Vertical Frequency or Refresh Rate. Unit: Hz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
General  
Model Name  
LCD Panel  
Size  
SyncMaster 2233NWPLUS  
22 inch (55 cm)  
Display area  
473.76 mm (H) x 296.1 mm (V)  
0.282 mm (H) x 0.282 mm (V)  
Pixel Pitch  
Synchronization  
Horizontal  
30 ~ 81 kHz  
56 ~ 75 Hz  
Vertical  
Display Color  
16.7M  
Resolution  
Optimum resolution  
1680 x 1050@60 Hz  
1680 x 1050@60 Hz  
Maximum resolution  
Input Signal, Terminated  
RGB Analog,  
0.7 Vp-p ± 5 %  
Separate H/V sync, Composite, SOG  
TTL level (V high 2.0 V, V low 0.8 V)  
Maximum Pixel Clock  
146 MHz (Analog)  
Power Supply  
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz  
Signal Cable  
15pin - to - 15pin D-sub cable, Detachable  
Dimensions (W x H x D) / Weight (Simple Stand)  
516.8 x 372.7 x 71.2 mm / 20.3 x 14.7 x 2.8 inch (Without Stand)  
516.8 x 421.3 x 208.7 mm / 20.3 x 16.6 x 8.2 inch (With Stand), 4.7 kg / 10.4 lbs  
VESA Mounting Interface  
100 mm x 100 mm (For use with Specialty(Arm) Mounting hardware.)  
Environmental considerations  
Temperature : 50°F ~ 104°F (10°C ~ 40°C)  
Operating  
Humidity : 10 % ~ 80 %, non-condensing  
Storage  
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Humidity : 5 % ~ 95 %, non-condensing  
Plug and Play Capability  
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the  
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor  
installation will proceed automatically, unless the user wishes to select alternate settings.  
Dot Acceptable  
TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)  
above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright  
sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.  
Note  
Design and specifications are subject to change without prior notice.  
Class B Equipment (Information Communication equipment for residential use)  
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas  
including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PowerSaver  
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor  
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal  
operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or  
when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in  
your computer. Use the software utility installed on your computer to set up this feature.  
Power off (Power button)  
State  
Normal Operation  
Power saving mode  
EPA/ENERGY 2000  
Power Indicator  
On  
Blinking  
Off  
Power Consumption  
45 watts  
Less than 1 watts  
®
Less than 1 watts  
This monitor is EPA ENERGY STAR compliant and ENERGY 2000 compliant when used with  
a computer equipped with VESA DPM functionality.  
®
As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the  
®
ENERGY STAR guidelines for energy efficiency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Preset Timing Modes  
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted  
automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual  
and adjusts the screen as follows.  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency (Hz)  
Pixel Clock  
(MHz)  
Sync Polarity  
(H/V)  
Display Mode  
IBM, 720 x 400  
MAC, 640 x 480  
MAC, 832 x 624  
MAC, 1152 x 870  
VESA, 640 x 480  
VESA, 640 x 480  
VESA, 640 x 480  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1024 x 768  
VESA, 1152 x 864  
VESA, 1280 x 800  
VESA, 1280 x 960  
VESA, 1280 x 1024  
VESA, 1280 x 1024  
VESA, 1440 x 900  
VESA, 1440 x 900  
VESA, 1680 x 1050  
31.469  
35.000  
49.726  
68.681  
31.469  
37.861  
37.500  
35.156  
37.879  
48.077  
46.875  
48.363  
56.476  
60.023  
67.500  
49.702  
60.000  
63.981  
79.976  
55.935  
70.635  
65.290  
70.087  
66.667  
74.551  
75.062  
59.94  
28.322  
30.240  
57.284  
100.000  
25.175  
31.500  
31.500  
36.000  
40.000  
50.000  
49.500  
65.000  
75.000  
78.750  
108.000  
83.500  
108.000  
108.000  
135.000  
106.500  
136.750  
146.250  
-/+  
-/-  
-/-  
-/-  
-/-  
72.809  
75.000  
56.250  
60.317  
72.188  
75.000  
60.004  
70.069  
75.029  
75.000  
59.810  
60.000  
60.020  
75.025  
59.887  
74.984  
59.954  
-/-  
-/-  
+/+  
+/+  
+/+  
+/+  
-/-  
-/-  
+/+  
+/+  
-/+  
+/+  
+/+  
+/+  
-/+  
-/+  
-/+  
Horizontal Frequency  
The time to scan one line connecting the right edge to the left edge of the  
screen horizontally is called the Horizontal Cycle and the inverse number of  
the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz  
Vertical Frequency  
Like a fluorescent lamp, the screen has to repeat the same image many times  
per second to display an image to the user. The frequency of this repetition is  
called the Vertical Frequency or Refresh Rate. Unit: Hz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
General  
Model Name  
LCD Panel  
Size  
SyncMaster 2233SN  
21.5 inch (54.68 cm)  
Display area  
476.64 mm (H) x 268.11 mm (V)  
0.248 mm (H) x 0.248 mm (V)  
Pixel Pitch  
Synchronization  
Horizontal  
31 ~ 80kHz  
50 ~ 75Hz  
Vertical  
Display Color  
16.7M  
Resolution  
Optimum resolution  
1920 x 1080@60 Hz  
1920 x 1080@60 Hz  
Maximum resolution  
Input Signal, Terminated  
RGB Analog,  
0.7 Vp-p ± 5 %  
Separate H/V sync, Composite, SOG  
TTL level (V high 2.0 V, V low 0.8 V)  
Maximum Pixel Clock  
162 MHz (Analog)  
Power Supply  
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz  
Signal Cable  
15pin - to - 15pin D-sub cable, Detachable  
Dimensions (W x H x D) / Weight (Simple Stand)  
519 x 344.7 x 71.1 mm (20.4 x 13.6 x 2.8 inch) (Without Stand)  
519 x 392.3 x 208.7 mm (20.4 x 15.4 x 8.2 inch) (With Stand) / 4.40 kg (9.7 lbs)  
VESA Mounting Interface  
100 mm x 100 mm (For use with Specialty(Arm) Mounting hardware.)  
Environmental considerations  
Temperature : 50°F ~ 104°F (10°C ~ 40°C)  
Operating  
Humidity : 10 % ~ 80 %, non-condensing  
Storage  
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Humidity : 5 % ~ 95 %, non-condensing  
Plug and Play Capability  
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the  
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor  
installation will proceed automatically, unless the user wishes to select alternate settings.  
Dot Acceptable  
TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)  
above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright  
sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.  
Note  
Design and specifications are subject to change without prior notice.  
Class B Equipment (Information Communication equipment for residential use)  
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas  
including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PowerSaver  
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor  
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal  
operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or  
when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in  
your computer. Use the software utility installed on your computer to set up this feature.  
Power off (Power button)  
State  
Normal Operation  
Power saving mode  
EPA/ENERGY 2000  
Power Indicator  
On  
Blinking  
Off  
Power Consumption  
45 watts  
Less than 1 watts  
®
Less than 1 watts  
This monitor is EPA ENERGY STAR compliant and ENERG Y2000 compliant when used with  
a computer equipped with VESA DPM functionality.  
®
As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the  
®
ENERGY STAR guidelines for energy efficiency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Preset Timing Modes  
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted  
automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual  
and adjusts the screen as follows.  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency (Hz)  
Pixel Clock  
(MHz)  
Sync Polarity  
(H/V)  
Display Mode  
VESA, 640 x 480  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 1024 x 768  
VESA, 1280 x 800  
VESA, 1280 X 960  
VESA, 1280 X 1024  
VESA, 1440 X 900  
VESA, 1600 X 1200  
VESA, 1680 X 1050  
VESA, 1920 X 1080  
31.469  
35.156  
37.879  
48.363  
49.702  
60.000  
63.981  
55.935  
75.000  
65.290  
66.587  
59.940  
56.250  
60.317  
60.004  
59.810  
60.000  
60.020  
59.887  
60.000  
59.954  
59.934  
25.175  
36.000  
-/-  
+/+  
+/+  
-/-  
40.000  
65.000  
83.500  
-/+  
+/+  
+/+  
-/+  
+/+  
-/+  
+/-  
108.000  
108.000  
106.500  
162.000  
146.250  
138.500  
Horizontal Frequency  
The time to scan one line connecting the right edge to the left edge of the  
screen horizontally is called the Horizontal Cycle and the inverse number of  
the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz  
Vertical Frequency  
Like a fluorescent lamp, the screen has to repeat the same image many times  
per second to display an image to the user. The frequency of this repetition is  
called the Vertical Frequency or Refresh Rate. Unit: Hz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
General  
Model Name  
LCD Panel  
Size  
SyncMaster 2233SNPLUS  
21.5 inch (54.68 cm)  
Display area  
476.64 mm (H) x 268.11 mm (V)  
0.248 mm (H) x 0.248 mm (V)  
Pixel Pitch  
Synchronization  
Horizontal  
31 ~ 80kHz  
50 ~ 75Hz  
Vertical  
Display Color  
16.7M  
Resolution  
Optimum resolution  
1920 x 1080@60 Hz  
1920 x 1080@60 Hz  
Maximum resolution  
Input Signal, Terminated  
RGB Analog,  
0.7 Vp-p ± 5 %  
Separate H/V sync, Composite, SOG  
TTL level (V high 2.0 V, V low 0.8 V)  
Maximum Pixel Clock  
162 MHz (Analog)  
Power Supply  
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz  
Signal Cable  
15pin - to - 15pin D-sub cable, Detachable  
Dimensions (W x H x D) / Weight (Simple Stand)  
519 x 344.7 x 71.1 mm (20.4 x 13.6 x 2.8 inch) (Without Stand)  
519 x 392.3 x 208.7 mm (20.4 x 15.4 x 8.2 inch) (With Stand) / 4.40 kg (9.7 lbs)  
VESA Mounting Interface  
100 mm x 100 mm (For use with Specialty(Arm) Mounting hardware.)  
Environmental considerations  
Temperature : 50°F ~ 104°F (10°C ~ 40°C)  
Operating  
Humidity : 10 % ~ 80 %, non-condensing  
Storage  
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Humidity : 5 % ~ 95 %, non-condensing  
Plug and Play Capability  
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the  
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor  
installation will proceed automatically, unless the user wishes to select alternate settings.  
Dot Acceptable  
TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)  
above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright  
sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.  
Note  
Design and specifications are subject to change without prior notice.  
Class B Equipment (Information Communication equipment for residential use)  
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas  
including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PowerSaver  
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor  
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal  
operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or  
when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in  
your computer. Use the software utility installed on your computer to set up this feature.  
Power off (Power button)  
State  
Normal Operation  
Power saving mode  
EPA/ENERGY 2000  
Power Indicator  
On  
Blinking  
Off  
Power Consumption  
45 watts  
Less than 1 watts  
®
Less than 1 watts  
This monitor is EPA ENERGY STAR compliant and ENERG Y2000 compliant when used with  
a computer equipped with VESA DPM functionality.  
®
As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the  
®
ENERGY STAR guidelines for energy efficiency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Preset Timing Modes  
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted  
automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual  
and adjusts the screen as follows.  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency (Hz)  
Pixel Clock  
(MHz)  
Sync Polarity  
(H/V)  
Display Mode  
VESA, 640 x 480  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 1024 x 768  
VESA, 1280 x 800  
VESA, 1280 X 960  
VESA, 1280 X 1024  
VESA, 1440 X 900  
VESA, 1600 X 1200  
VESA, 1680 X 1050  
VESA, 1920 X 1080  
31.469  
35.156  
37.879  
48.363  
49.702  
60.000  
63.981  
55.935  
75.000  
65.290  
66.587  
59.940  
56.250  
60.317  
60.004  
59.810  
60.000  
60.020  
59.887  
60.000  
59.954  
59.934  
25.175  
36.000  
-/-  
+/+  
+/+  
-/-  
40.000  
65.000  
83.500  
-/+  
+/+  
+/+  
-/+  
+/+  
-/+  
+/-  
108.000  
108.000  
106.500  
162.000  
146.250  
138.500  
Horizontal Frequency  
The time to scan one line connecting the right edge to the left edge of the  
screen horizontally is called the Horizontal Cycle and the inverse number of  
the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz  
Vertical Frequency  
Like a fluorescent lamp, the screen has to repeat the same image many times  
per second to display an image to the user. The frequency of this repetition is  
called the Vertical Frequency or Refresh Rate. Unit: Hz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
General  
Model Name  
LCD Panel  
Size  
SyncMaster 2233SW  
21.5 inch (54.68 cm)  
Display area  
476.64 mm (H) x 268.11 mm (V)  
0.248 mm (H) x 0.248 mm (V)  
Pixel Pitch  
Synchronization  
Horizontal  
31 ~ 80 kHz  
50 ~ 75 Hz  
Vertical  
Display Color  
16.7M  
Resolution  
Optimum resolution  
1920 x 1080@60 Hz  
1920 x 1080@60 Hz  
Maximum resolution  
Input Signal, Terminated  
RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB  
0.7 Vp-p ± 5 %  
Separate H/V sync, Composite, SOG  
TTL level (V high 2.0 V, V low 0.8 V)  
Maximum Pixel Clock  
162 MHz (Analog, Digital)  
Power Supply  
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz  
Signal Cable  
15pin - to - 15pin D-sub cable, Detachable  
DVI-D to DVI-D connector, Detachable  
Dimensions (W x H x D) / Weight (Simple Stand)  
519 x 344.7 x 71.1 mm (20.4 x 13.6 x 2.8 inch) (Without Stand)  
519 x 392.3 x 208.7 mm (20.4 x 15.4 x 8.2 inch) (With Stand) / 4.40 kg (9.7 lbs)  
VESA Mounting Interface  
100 mm x 100 mm (For use with Specialty(Arm) Mounting hardware.)  
Environmental considerations  
Temperature : 50°F ~ 104°F (10°C ~ 40°C)  
Operating  
Humidity : 10 % ~ 80 %, non-condensing  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)  
Humidity : 5 % ~ 95 %, non-condensing  
Storage  
Plug and Play Capability  
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the  
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor  
installation will proceed automatically, unless the user wishes to select alternate settings.  
Dot Acceptable  
TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)  
above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright  
sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.  
Note  
Design and specifications are subject to change without prior notice.  
Class B Equipment (Information Communication equipment for residential use)  
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas  
including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PowerSaver  
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor  
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal  
operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or  
when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in  
your computer. Use the software utility installed on your computer to set up this feature.  
Power off (Power button)  
State  
Normal Operation  
Power saving mode  
EPA/ENERGY 2000  
Power Indicator  
On  
Blinking  
Off  
Power Consumption  
45 watts  
Less than 1 watts  
®
Less than 1 watts  
This monitor is EPA ENERGY STAR compliant and ENERGY 2000 compliant when used with  
a computer equipped with VESA DPM functionality.  
®
As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the  
®
ENERGY STAR guidelines for energy efficiency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Preset Timing Modes  
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted  
automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual  
and adjusts the screen as follows.  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency (Hz)  
Pixel Clock  
(MHz)  
Sync Polarity  
(H/V)  
Display Mode  
VESA, 640 x 480  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 1024 x 768  
VESA, 1280 X 800  
VESA, 1280 X 960  
VESA, 1280 X 1024  
VESA, 1440 X 900  
VESA, 1600 X 1200  
VESA, 1680 X 1050  
VESA, 1920 X 1080  
31.469  
35.156  
37.879  
48.363  
49.702  
60.000  
63.981  
55.935  
75.000  
65.290  
66.587  
59.940  
56.250  
60.317  
60.004  
59.810  
60.000  
60.020  
59.887  
60.000  
59.954  
59.934  
25.175  
36.000  
-/-  
+/+  
+/+  
-/-  
40.000  
65.000  
83.500  
-/+  
+/+  
+/+  
-/+  
+/+  
-/+  
+/-  
108.000  
108.000  
106.500  
162.000  
146.250  
138.500  
Horizontal Frequency  
The time to scan one line connecting the right edge to the left edge of the  
screen horizontally is called the Horizontal Cycle and the inverse number of  
the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz  
Vertical Frequency  
Like a fluorescent lamp, the screen has to repeat the same image many times  
per second to display an image to the user. The frequency of this repetition is  
called the Vertical Frequency or Refresh Rate. Unit: Hz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
General  
Model Name  
LCD Panel  
Size  
SyncMaster 2233SWPLUS  
21.5 inch (54.68 cm)  
Display area  
476.64 mm (H) x 268.11 mm (V)  
0.248 mm (H) x 0.248 mm (V)  
Pixel Pitch  
Synchronization  
Horizontal  
31 ~ 80 kHz  
50 ~ 75 Hz  
Vertical  
Display Color  
16.7M  
Resolution  
Optimum resolution  
1920 x 1080@60 Hz  
1920 x 1080@60 Hz  
Maximum resolution  
Input Signal, Terminated  
RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB  
0.7 Vp-p ± 5 %  
Separate H/V sync, Composite, SOG  
TTL level (V high 2.0 V, V low 0.8 V)  
Maximum Pixel Clock  
162 MHz (Analog, Digital)  
Power Supply  
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz  
Signal Cable  
15pin - to - 15pin D-sub cable, Detachable  
DVI-D to DVI-D connector, Detachable  
Dimensions (W x H x D) / Weight (Simple Stand)  
519 x 344.7 x 71.1 mm (20.4 x 13.6 x 2.8 inch) (Without Stand)  
519 x 392.3 x 208.7 mm (20.4 x 15.4 x 8.2 inch) (With Stand) / 4.40 kg (9.7 lbs)  
VESA Mounting Interface  
100 mm x 100 mm (For use with Specialty(Arm) Mounting hardware.)  
Environmental considerations  
Temperature : 50°F ~ 104°F (10°C ~ 40°C)  
Operating  
Humidity : 10 % ~ 80 %, non-condensing  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)  
Humidity : 5 % ~ 95 %, non-condensing  
Storage  
Plug and Play Capability  
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the  
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor  
installation will proceed automatically, unless the user wishes to select alternate settings.  
Dot Acceptable  
TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)  
above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright  
sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.  
Note  
Design and specifications are subject to change without prior notice.  
Class B Equipment (Information Communication equipment for residential use)  
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas  
including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PowerSaver  
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor  
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal  
operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or  
when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in  
your computer. Use the software utility installed on your computer to set up this feature.  
Power off (Power button)  
State  
Normal Operation  
Power saving mode  
EPA/ENERGY 2000  
Power Indicator  
On  
Blinking  
Off  
Power Consumption  
45 watts  
Less than 1 watts  
®
Less than 1 watts  
This monitor is EPA ENERGY STAR compliant and ENERGY 2000 compliant when used with  
a computer equipped with VESA DPM functionality.  
®
As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the  
®
ENERGY STAR guidelines for energy efficiency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Preset Timing Modes  
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted  
automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual  
and adjusts the screen as follows.  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency (Hz)  
Pixel Clock  
(MHz)  
Sync Polarity  
(H/V)  
Display Mode  
VESA, 640 x 480  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 1024 x 768  
VESA, 1280 X 800  
VESA, 1280 X 960  
VESA, 1280 X 1024  
VESA, 1440 X 900  
VESA, 1600 X 1200  
VESA, 1680 X 1050  
VESA, 1920 X 1080  
31.469  
35.156  
37.879  
48.363  
49.702  
60.000  
63.981  
55.935  
75.000  
65.290  
66.587  
59.940  
56.250  
60.317  
60.004  
59.810  
60.000  
60.020  
59.887  
60.000  
59.954  
59.934  
25.175  
36.000  
-/-  
+/+  
+/+  
-/-  
40.000  
65.000  
83.500  
-/+  
+/+  
+/+  
-/+  
+/+  
-/+  
+/-  
108.000  
108.000  
106.500  
162.000  
146.250  
138.500  
Horizontal Frequency  
The time to scan one line connecting the right edge to the left edge of the  
screen horizontally is called the Horizontal Cycle and the inverse number of  
the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz  
Vertical Frequency  
Like a fluorescent lamp, the screen has to repeat the same image many times  
per second to display an image to the user. The frequency of this repetition is  
called the Vertical Frequency or Refresh Rate. Unit: Hz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
General  
Model Name  
LCD Panel  
Size  
SyncMaster 2333GWPLUS  
23 inch (58 cm)  
Display area  
509.76 mm (H) x 286.74 mm (V)  
0.2655 mm (H) x 0.2655 mm (V)  
Pixel Pitch  
Synchronization  
Horizontal  
30 ~ 75 kHz  
56 ~ 61 Hz  
Vertical  
Display Color  
16.7M  
Resolution  
Optimum resolution  
1920 x 1080@60 Hz  
1920 x 1080@60 Hz  
Maximum resolution  
Input Signal, Terminated  
RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB  
0.7 Vp-p ± 5 %  
Separate H/V sync, Composite, SOG  
TTL level (V high 2.0 V, V low 0.8 V)  
Maximum Pixel Clock  
164 MHz (Analog, Digital)  
Power Supply  
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz  
Signal Cable  
15pin - to - 15pin D-sub cable, Detachable , 1.5m  
DVI-D to DVI-D connector, Detachable , 1.5m  
Dimensions (W x H x D) / Weight (Simple Stand)  
557.3 x 365.8 x 71.5 mm (21.9 x 14.4 x 2.8 inch) (Without Stand)  
557.3 x 415.7 x 218.6 mm (21.9 x 16.4 x 8.6 inch) (With Stand) / 5.4 kg (10.4 lbs)  
VESA Mounting Interface  
100.0 mm x 100.0 mm  
Environmental considerations  
Temperature : 50°F ~ 104°F (10°C ~ 40°C)  
Operating  
Humidity : 10 % ~ 80 %, non-condensing  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)  
Humidity : 5 % ~ 95 %, non-condensing  
Storage  
Plug and Play Capability  
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the  
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor  
installation will proceed automatically, unless the user wishes to select alternate settings.  
Dot Acceptable  
TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)  
above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright  
sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.  
Note  
Design and specifications are subject to change without prior notice.  
Class B Equipment (Information Communication equipment for residential use)  
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas  
including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PowerSaver  
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor  
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal  
operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or  
when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in  
your computer. Use the software utility installed on your computer to set up this feature.  
Power off (Power button)  
State  
Normal Operation  
Power saving mode  
EPA/ENERGY 2000  
Power Indicator  
ON  
blinking  
Off  
Power Consumption  
45 watts  
Less than 1 watts  
®
Less than 1 watts  
This monitor is EPA ENERGY STAR compliant and ENERGY 2000 compliant when used with  
a computer equipped with VESA DPM functionality.  
®
As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the  
®
ENERGY STAR guidelines for energy efficiency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Preset Timing Modes  
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted  
automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual  
and adjusts the screen as follows.  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency (Hz)  
Pixel Clock  
(MHz)  
Sync Polarity  
(H/V)  
Display Mode  
VESA, 640 x 480  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 1024 x 768  
VESA, 1280 X 800  
VESA, 1280 X 960  
VESA, 1280 X 1024  
VESA, 1440 X 900  
VESA, 1600 X 1200  
VESA, 1680 X 1050  
VESA, 1920 X 1080  
31.469  
35.156  
37.879  
48.363  
49.702  
60.000  
63.981  
55.935  
75.000  
65.290  
66.587  
59.940  
56.250  
60.317  
60.004  
59.810  
60.000  
60.020  
59.887  
60.000  
59.954  
59.934  
25.175  
36.000  
-/-  
+/+  
+/+  
-/-  
40.000  
65.000  
83.500  
-/+  
+/+  
+/+  
-/+  
+/+  
-/+  
+/-  
108.000  
108.000  
106.500  
162.000  
146.250  
138.500  
Horizontal Frequency  
The time to scan one line connecting the right edge to the left edge of the  
screen horizontally is called the Horizontal Cycle and the inverse number of  
the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz  
Vertical Frequency  
Like a fluorescent lamp, the screen has to repeat the same image many times  
per second to display an image to the user. The frequency of this repetition is  
called the Vertical Frequency or Refresh Rate. Unit: Hz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
General  
Model Name  
LCD Panel  
Size  
SyncMaster 2333SW  
23 inch (58 cm)  
Display area  
509.76 mm (H) x 286.74 mm (V)  
0.2655 mm (H) x 0.2655 mm (V)  
Pixel Pitch  
Synchronization  
Horizontal  
30 ~ 75 kHz  
56 ~ 61 Hz  
Vertical  
Display Color  
16.7M  
Resolution  
Optimum resolution  
1920 x 1080@60 Hz  
1920 x 1080@60 Hz  
Maximum resolution  
Input Signal, Terminated  
RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB  
0.7 Vp-p ± 5 %  
Separate H/V sync, Composite, SOG  
TTL level (V high 2.0 V, V low 0.8 V)  
Maximum Pixel Clock  
164 MHz (Analog, Digital)  
Power Supply  
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz  
Signal Cable  
15pin - to - 15pin D-sub cable, Detachable  
DVI-D to DVI-D connector, Detachable  
Dimensions (W x H x D) / Weight (Simple Stand)  
557.3 x 365.8 x 71.5 mm (21.9 x 14.4 x 2.8 inch) (Without Stand)  
557.3 x 415.7 x 218.6 mm (21.9 x 16.4 x 8.6 inch) (With Stand) / 5.4 kg (11.9 lbs)  
VESA Mounting Interface  
100.0 mm x 100.0 mm  
Environmental considerations  
Temperature : 50°F ~ 104°F (10°C ~ 40°C)  
Operating  
Humidity : 10 % ~ 80 %, non-condensing  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)  
Humidity : 5 % ~ 95 %, non-condensing  
Storage  
Plug and Play Capability  
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the  
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor  
installation will proceed automatically, unless the user wishes to select alternate settings.  
Dot Acceptable  
TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)  
above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright  
sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.  
Note  
Design and specifications are subject to change without prior notice.  
Class B Equipment (Information Communication equipment for residential use)  
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas  
including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PowerSaver  
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor  
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal  
operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or  
when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in  
your computer. Use the software utility installed on your computer to set up this feature.  
Power off (Power button)  
State  
Normal Operation  
Power saving mode  
EPA/ENERGY 2000  
Power Indicator  
ON  
blinking  
Off  
Power Consumption  
45 watts  
Less than 1 watts  
®
Less than 1 watts  
This monitor is EPA ENERGY STAR compliant and ENERGY 2000 compliant when used with  
a computer equipped with VESA DPM functionality.  
®
As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the  
®
ENERGY STAR guidelines for energy efficiency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Preset Timing Modes  
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted  
automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual  
and adjusts the screen as follows.  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency (Hz)  
Pixel Clock  
(MHz)  
Sync Polarity  
(H/V)  
Display Mode  
VESA, 640 x 480  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 1024 x 768  
VESA, 1280 X 800  
VESA, 1280 X 960  
VESA, 1280 X 1024  
VESA, 1440 X 900  
VESA, 1600 X 1200  
VESA, 1680 X 1050  
VESA, 1920 X 1080  
31.469  
35.156  
37.879  
48.363  
49.702  
60.000  
63.981  
55.935  
75.000  
65.290  
66.587  
59.940  
56.250  
60.317  
60.004  
59.810  
60.000  
60.020  
59.887  
60.000  
59.954  
59.934  
25.175  
36.000  
-/-  
+/+  
+/+  
-/-  
40.000  
65.000  
83.500  
-/+  
+/+  
+/+  
-/+  
+/+  
-/+  
+/-  
108.000  
108.000  
106.500  
162.000  
146.250  
138.500  
Horizontal Frequency  
The time to scan one line connecting the right edge to the left edge of the  
screen horizontally is called the Horizontal Cycle and the inverse number of  
the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz  
Vertical Frequency  
Like a fluorescent lamp, the screen has to repeat the same image many times  
per second to display an image to the user. The frequency of this repetition is  
called the Vertical Frequency or Refresh Rate. Unit: Hz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
General  
Model Name  
LCD Panel  
Size  
SyncMaster 2333SWPLUS  
23 inch (58 cm)  
Display area  
509.76 mm (H) x 286.74 mm (V)  
0.2655 mm (H) x 0.2655 mm (V)  
Pixel Pitch  
Synchronization  
Horizontal  
30 ~ 75 kHz  
56 ~ 61 Hz  
Vertical  
Display Color  
16.7M  
Resolution  
Optimum resolution  
1920 x 1080@60 Hz  
1920 x 1080@60 Hz  
Maximum resolution  
Input Signal, Terminated  
RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB  
0.7 Vp-p ± 5 %  
Separate H/V sync, Composite, SOG  
TTL level (V high 2.0 V, V low 0.8 V)  
Maximum Pixel Clock  
164 MHz (Analog, Digital)  
Power Supply  
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz  
Signal Cable  
15pin - to - 15pin D-sub cable, Detachable  
DVI-D to DVI-D connector, Detachable  
Dimensions (W x H x D) / Weight (Simple Stand)  
557.3 x 365.8 x 71.5 mm (21.9 x 14.4 x 2.8 inch) (Without Stand)  
557.3 x 415.7 x 218.6 mm (21.9 x 16.4 x 8.6 inch) (With Stand) / 5.4 kg (11.9 lbs)  
VESA Mounting Interface  
100.0 mm x 100.0 mm  
Environmental considerations  
Temperature : 50°F ~ 104°F (10°C ~ 40°C)  
Operating  
Humidity : 10 % ~ 80 %, non-condensing  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)  
Humidity : 5 % ~ 95 %, non-condensing  
Storage  
Plug and Play Capability  
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the  
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor  
installation will proceed automatically, unless the user wishes to select alternate settings.  
Dot Acceptable  
TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)  
above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright  
sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.  
Note  
Design and specifications are subject to change without prior notice.  
Class B Equipment (Information Communication equipment for residential use)  
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas  
including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PowerSaver  
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor  
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal  
operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or  
when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in  
your computer. Use the software utility installed on your computer to set up this feature.  
Power off (Power button)  
State  
Normal Operation  
Power saving mode  
EPA/ENERGY 2000  
Power Indicator  
ON  
blinking  
Off  
Power Consumption  
45 watts  
Less than 1 watts  
®
Less than 1 watts  
This monitor is EPA ENERGY STAR compliant and ENERGY 2000 compliant when used with  
a computer equipped with VESA DPM functionality.  
®
As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the  
®
ENERGY STAR guidelines for energy efficiency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Preset Timing Modes  
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted  
automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual  
and adjusts the screen as follows.  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency (Hz)  
Pixel Clock  
(MHz)  
Sync Polarity  
(H/V)  
Display Mode  
VESA, 640 x 480  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 1024 x 768  
VESA, 1280 X 800  
VESA, 1280 X 960  
VESA, 1280 X 1024  
VESA, 1440 X 900  
VESA, 1600 X 1200  
VESA, 1680 X 1050  
VESA, 1920 X 1080  
31.469  
35.156  
37.879  
48.363  
49.702  
60.000  
63.981  
55.935  
75.000  
65.290  
66.587  
59.940  
56.250  
60.317  
60.004  
59.810  
60.000  
60.020  
59.887  
60.000  
59.954  
59.934  
25.175  
36.000  
-/-  
+/+  
+/+  
-/-  
40.000  
65.000  
83.500  
-/+  
+/+  
+/+  
-/+  
+/+  
-/+  
+/-  
108.000  
108.000  
106.500  
162.000  
146.250  
138.500  
Horizontal Frequency  
The time to scan one line connecting the right edge to the left edge of the  
screen horizontally is called the Horizontal Cycle and the inverse number of  
the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz  
Vertical Frequency  
Like a fluorescent lamp, the screen has to repeat the same image many times  
per second to display an image to the user. The frequency of this repetition is  
called the Vertical Frequency or Refresh Rate. Unit: Hz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
General  
Model Name  
LCD Panel  
Size  
SyncMaster 2433BW  
24 inch (61 cm)  
Display area  
518.4 mm (H) x 324.0 mm (V)  
0.270 mm (H) x 0.270 mm (V)  
Pixel Pitch  
Synchronization  
Horizontal  
30 ~ 81 kHz  
50 ~ 63 Hz  
Vertical  
Display Color  
16.7M  
Resolution  
Optimum resolution  
1920 x 1200@60 Hz  
1920 x 1200@60 Hz  
Maximum resolution  
Input Signal, Terminated  
RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB  
0.7 Vp-p ± 5 %  
Separate H/V sync, Composite, SOG  
TTL level (V high 2.0 V, V low 0.8 V)  
Maximum Pixel Clock  
164 MHz (Analog, Digital)  
Power Supply  
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz  
Signal Cable  
15pin - to - 15pin D-sub cable, Detachable  
DVI-D to DVI-D connector, Detachable  
Dimensions (W x H x D) / Weight (Simple Stand)  
569.5 x 403.0 x 71.1 mm / 22.4 x 15.9 x 2.8 inch (Without Stand)  
569.5 x 453.4 x 218.7 mm / 22.4 x 17.9 x 8.6 inch (With Stand), 5.8 kg / 12.8 lbs  
VESA Mounting Interface  
100 mm x 100 mm (For use with Specialty(Arm) Mounting hardware.)  
Environmental considerations  
Temperature : 50°F ~ 104°F (10°C ~ 40°C)  
Operating  
Humidity : 10 % ~ 80 %, non-condensing  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)  
Humidity : 5 % ~ 95 %, non-condensing  
Storage  
Plug and Play Capability  
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the  
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor  
installation will proceed automatically, unless the user wishes to select alternate settings.  
Dot Acceptable  
TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)  
above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright  
sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.  
Note  
Design and specifications are subject to change without prior notice.  
Class B Equipment (Information Communication equipment for residential use)  
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas  
including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PowerSaver  
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor  
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal  
operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or  
when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in  
your computer. Use the software utility installed on your computer to set up this feature.  
Power off (Power button)  
State  
Normal Operation  
Power saving mode  
EPA/ENERGY 2000  
Power Indicator  
On  
Blinking  
Off  
Power Consumption  
50 watts  
Less than 1 watts  
®
Less than 1 watts  
This monitor is EPA ENERGY STAR compliant and ENERGY2000 compliant when used with  
a computer equipped with VESA DPM functionality.  
®
As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the  
®
ENERGY STAR guidelines for energy efficiency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Preset Timing Modes  
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted  
automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual  
and adjusts the screen as follows.  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency (Hz)  
Pixel Clock  
(MHz)  
Sync Polarity  
(H/V)  
Display Mode  
VESA, 640 x 480  
VESA, 800 x 600  
VESA, 800 x 600  
VESA,1024 x 768  
VESA, 1280 x 800  
VESA, 1280 X 960  
VESA, 1280 X 1024  
VESA,1440 x 900  
VESA,1600 X 1200  
VESA, 1680 x 1050  
VESA, 1920 X 1200  
31,469  
35,156  
37,879  
48,363  
49,702  
60,000  
63,981  
55,935  
75,000  
65,290  
74,556  
59,940  
56,250  
60,317  
60,004  
59,810  
60,000  
60,020  
59,887  
60,000  
59,954  
59,885  
25,175  
36,000  
-/-  
+/+  
+/+  
-/-  
40,000  
65,000  
83,500  
-/+  
+/+  
+/+  
-/+  
+/+  
-/+  
-/+  
108,000  
108,000  
106,500  
162,000  
146,250  
193,250  
Horizontal Frequency  
The time to scan one line connecting the right edge to the left edge of the  
screen horizontally is called the Horizontal Cycle and the inverse number of  
the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz  
Vertical Frequency  
Like a fluorescent lamp, the screen has to repeat the same image many times  
per second to display an image to the user. The frequency of this repetition is  
called the Vertical Frequency or Refresh Rate. Unit: Hz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
General  
Model Name  
LCD Panel  
Size  
SyncMaster 2433BWPLUS  
24 inch (61 cm)  
Display area  
518.4 mm (H) x 324.0 mm (V)  
0.270 mm (H) x 0.270 mm (V)  
Pixel Pitch  
Synchronization  
Horizontal  
30 ~ 81 kHz  
50 ~ 63 Hz  
Vertical  
Display Color  
16.7M  
Resolution  
Optimum resolution  
1920 x 1200@60 Hz  
1920 x 1200@60 Hz  
Maximum resolution  
Input Signal, Terminated  
RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB  
0.7 Vp-p ± 5 %  
Separate H/V sync, Composite, SOG  
TTL level (V high 2.0 V, V low 0.8 V)  
Maximum Pixel Clock  
164 MHz (Analog, Digital)  
Power Supply  
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz  
Signal Cable  
15pin - to - 15pin D-sub cable, Detachable  
DVI-D to DVI-D connector, Detachable  
Dimensions (W x H x D) / Weight (Simple Stand)  
569.5 x 403.0 x 71.1 mm / 22.4 x 15.9 x 2.8 inch (Without Stand)  
569.5 x 453.4 x 218.7 mm / 22.4 x 17.9 x 8.6 inch (With Stand), 5.8 kg / 12.8 lbs  
VESA Mounting Interface  
100 mm x 100 mm (For use with Specialty(Arm) Mounting hardware.)  
Environmental considerations  
Temperature : 50°F ~ 104°F (10°C ~ 40°C)  
Operating  
Humidity : 10 % ~ 80 %, non-condensing  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)  
Humidity : 5 % ~ 95 %, non-condensing  
Storage  
Plug and Play Capability  
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the  
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor  
installation will proceed automatically, unless the user wishes to select alternate settings.  
Dot Acceptable  
TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)  
above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright  
sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.  
Note  
Design and specifications are subject to change without prior notice.  
Class B Equipment (Information Communication equipment for residential use)  
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas  
including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PowerSaver  
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor  
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal  
operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or  
when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in  
your computer. Use the software utility installed on your computer to set up this feature.  
Power off (Power button)  
State  
Normal Operation  
Power saving mode  
EPA/ENERGY 2000  
Power Indicator  
On  
Blinking  
Off  
Power Consumption  
50 watts  
Less than 1 watts  
®
Less than 1 watts  
This monitor is EPA ENERGY STAR compliant and ENERGY2000 compliant when used with  
a computer equipped with VESA DPM functionality.  
®
As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the  
®
ENERGY STAR guidelines for energy efficiency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Preset Timing Modes  
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted  
automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual  
and adjusts the screen as follows.  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency (Hz)  
Pixel Clock  
(MHz)  
Sync Polarity  
(H/V)  
Display Mode  
VESA, 640 x 480  
VESA, 800 x 600  
VESA, 800 x 600  
VESA,1024 x 768  
VESA, 1280 x 800  
VESA, 1280 X 960  
VESA, 1280 X 1024  
VESA,1440 x 900  
VESA,1600 X 1200  
VESA, 1680 x 1050  
VESA, 1920 X 1200  
31,469  
35,156  
37,879  
48,363  
49,702  
60,000  
63,981  
55,935  
75,000  
65,290  
74,556  
59,940  
56,250  
60,317  
60,004  
59,810  
60,000  
60,020  
59,887  
60,000  
59,954  
59,885  
25,175  
36,000  
-/-  
+/+  
+/+  
-/-  
40,000  
65,000  
83,500  
-/+  
+/+  
+/+  
-/+  
+/+  
-/+  
-/+  
108,000  
108,000  
106,500  
162,000  
146,250  
193,250  
Horizontal Frequency  
The time to scan one line connecting the right edge to the left edge of the  
screen horizontally is called the Horizontal Cycle and the inverse number of  
the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz  
Vertical Frequency  
Like a fluorescent lamp, the screen has to repeat the same image many times  
per second to display an image to the user. The frequency of this repetition is  
called the Vertical Frequency or Refresh Rate. Unit: Hz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
General  
Model Name  
LCD Panel  
Size  
SyncMaster 2433GW  
24 inch (61 cm)  
Display area  
518.4 mm (H) x 324.0 mm (V)  
0.270 mm (H) x 0.270 mm (V)  
Pixel Pitch  
Synchronization  
Horizontal  
30 ~ 81 kHz  
50 ~ 63 Hz  
Vertical  
Display Color  
16.7M  
Resolution  
Optimum resolution  
1920 x 1200@60 Hz  
1920 x 1200@60 Hz  
Maximum resolution  
Input Signal, Terminated  
RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB  
0.7 Vp-p ± 5 %  
Separate H/V sync, Composite, SOG  
TTL level (V high 2.0 V, V low 0.8 V)  
Maximum Pixel Clock  
164 MHz (Analog, Digital)  
Power Supply  
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz  
Signal Cable  
15pin - to - 15pin D-sub cable, Detachable  
DVI-D to DVI-D connector, Detachable  
Dimensions (W x H x D) / Weight (Simple Stand)  
569.5 x 403.0 x 71.1 mm / 22.4 x 15.9 x 2.8 inch (Without Stand)  
569.5 x 453.4 x 218.7 mm / 22.4 x 17.9 x 8.6 inch (With Stand), 5.8 kg / 12.8 lbs  
VESA Mounting Interface  
100 mm x 100 mm (For use with Specialty(Arm) Mounting hardware.)  
Environmental considerations  
Temperature : 50°F ~ 104°F (10°C ~ 40°C)  
Operating  
Humidity : 10 % ~ 80 %, non-condensing  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)  
Humidity : 5 % ~ 95 %, non-condensing  
Storage  
Plug and Play Capability  
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the  
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor  
installation will proceed automatically, unless the user wishes to select alternate settings.  
Dot Acceptable  
TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)  
above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright  
sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.  
Note  
Design and specifications are subject to change without prior notice.  
Class B Equipment (Information Communication equipment for residential use)  
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas  
including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PowerSaver  
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor  
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal  
operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or  
when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in  
your computer. Use the software utility installed on your computer to set up this feature.  
Power off (Power button)  
State  
Normal Operation  
Power saving mode  
EPA/ENERGY 2000  
Power Indicator  
On  
Blinking  
Off  
Power Consumption  
50 watts  
Less than 1 watts  
®
Less than 1 watts  
This monitor is EPA ENERGY STAR compliant and ENERGY2000 compliant when used with  
a computer equipped with VESA DPM functionality.  
®
As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the  
®
ENERGY STAR guidelines for energy efficiency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Preset Timing Modes  
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted  
automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual  
and adjusts the screen as follows.  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency (Hz)  
Pixel Clock  
(MHz)  
Sync Polarity  
(H/V)  
Display Mode  
VESA, 640 x 480  
VESA, 800 x 600  
VESA, 800 x 600  
VESA,1024 x 768  
VESA, 1280 x 800  
VESA, 1280 X 960  
VESA, 1280 X 1024  
VESA,1440 x 900  
VESA,1600 X 1200  
VESA, 1680 x 1050  
VESA, 1920 X 1200  
31,469  
35,156  
37,879  
48,363  
49,702  
60,000  
63,981  
55,935  
75,000  
65,290  
74,556  
59,940  
56,250  
60,317  
60,004  
59,810  
60,000  
60,020  
59,887  
60,000  
59,954  
59,885  
25,175  
36,000  
-/-  
+/+  
+/+  
-/-  
40,000  
65,000  
83,500  
-/+  
+/+  
+/+  
-/+  
+/+  
-/+  
-/+  
108,000  
108,000  
106,500  
162,000  
146,250  
193,250  
Horizontal Frequency  
The time to scan one line connecting the right edge to the left edge of the  
screen horizontally is called the Horizontal Cycle and the inverse number of  
the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz  
Vertical Frequency  
Like a fluorescent lamp, the screen has to repeat the same image many times  
per second to display an image to the user. The frequency of this repetition is  
called the Vertical Frequency or Refresh Rate. Unit: Hz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
General  
Model Name  
LCD Panel  
Size  
SyncMaster 2433GWPLUS  
24 inch (61 cm)  
Display area  
518.4 mm (H) x 324.0 mm (V)  
0.270 mm (H) x 0.270 mm (V)  
Pixel Pitch  
Synchronization  
Horizontal  
30 ~ 81 kHz  
50 ~ 63 Hz  
Vertical  
Display Color  
16.7M  
Resolution  
Optimum resolution  
1920 x 1200@60 Hz  
1920 x 1200@60 Hz  
Maximum resolution  
Input Signal, Terminated  
RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB  
0.7 Vp-p ± 5 %  
Separate H/V sync, Composite, SOG  
TTL level (V high 2.0 V, V low 0.8 V)  
Maximum Pixel Clock  
164 MHz (Analog, Digital)  
Power Supply  
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz  
Signal Cable  
15pin - to - 15pin D-sub cable, Detachable  
DVI-D to DVI-D connector, Detachable  
Dimensions (W x H x D) / Weight (Simple Stand)  
569.5 x 403.0 x 71.1 mm / 22.4 x 15.9 x 2.8 inch (Without Stand)  
569.5 x 453.4 x 218.7 mm / 22.4 x 17.9 x 8.6 inch (With Stand), 5.8 kg / 12.8 lbs  
VESA Mounting Interface  
100 mm x 100 mm (For use with Specialty(Arm) Mounting hardware.)  
Environmental considerations  
Temperature : 50°F ~ 104°F (10°C ~ 40°C)  
Operating  
Humidity : 10 % ~ 80 %, non-condensing  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)  
Humidity : 5 % ~ 95 %, non-condensing  
Storage  
Plug and Play Capability  
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the  
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor  
installation will proceed automatically, unless the user wishes to select alternate settings.  
Dot Acceptable  
TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)  
above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright  
sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.  
Note  
Design and specifications are subject to change without prior notice.  
Class B Equipment (Information Communication equipment for residential use)  
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas  
including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PowerSaver  
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor  
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal  
operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or  
when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in  
your computer. Use the software utility installed on your computer to set up this feature.  
Power off (Power button)  
State  
Normal Operation  
Power saving mode  
EPA/ENERGY 2000  
Power Indicator  
On  
Blinking  
Off  
Power Consumption  
50 watts  
Less than 1 watts  
®
Less than 1 watts  
This monitor is EPA ENERGY STAR compliant and ENERGY2000 compliant when used with  
a computer equipped with VESA DPM functionality.  
®
As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the  
®
ENERGY STAR guidelines for energy efficiency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Preset Timing Modes  
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted  
automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual  
and adjusts the screen as follows.  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency (Hz)  
Pixel Clock  
(MHz)  
Sync Polarity  
(H/V)  
Display Mode  
VESA, 640 x 480  
VESA, 800 x 600  
VESA, 800 x 600  
VESA,1024 x 768  
VESA, 1280 x 800  
VESA, 1280 X 960  
VESA, 1280 X 1024  
VESA,1440 x 900  
VESA,1600 X 1200  
VESA, 1680 x 1050  
VESA, 1920 X 1200  
31,469  
35,156  
37,879  
48,363  
49,702  
60,000  
63,981  
55,935  
75,000  
65,290  
74,556  
59,940  
56,250  
60,317  
60,004  
59,810  
60,000  
60,020  
59,887  
60,000  
59,954  
59,885  
25,175  
36,000  
-/-  
+/+  
+/+  
-/-  
40,000  
65,000  
83,500  
-/+  
+/+  
+/+  
-/+  
+/+  
-/+  
-/+  
108,000  
108,000  
106,500  
162,000  
146,250  
193,250  
Horizontal Frequency  
The time to scan one line connecting the right edge to the left edge of the  
screen horizontally is called the Horizontal Cycle and the inverse number of  
the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz  
Vertical Frequency  
Like a fluorescent lamp, the screen has to repeat the same image many times  
per second to display an image to the user. The frequency of this repetition is  
called the Vertical Frequency or Refresh Rate. Unit: Hz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
General  
Model Name  
LCD Panel  
Size  
SyncMaster 2433LW  
23.6 inch (59.8 cm)  
Display area  
521.28 mm (H) x 293.22 mm (V)  
0.2715 mm (H) x 0.2715 mm (V)  
Pixel Pitch  
Synchronization  
Horizontal  
30 ~ 81kHz  
56 ~ 60 Hz  
Vertical  
Display Color  
16.7M  
Resolution  
Optimum resolution  
1920 x 1080@60 Hz  
1920 x 1080@60 Hz  
Maximum resolution  
Input Signal, Terminated  
RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB  
0.7 Vp-p ± 5 %  
Separate H/V sync, Composite, SOG  
TTL level (V high 2.0 V, V low 0.8 V)  
Maximum Pixel Clock  
164 MHz (Analog, Digital)  
Power Supply  
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz  
Signal Cable  
15pin - to - 15pin D-sub cable, Detachable  
DVI-D to DVI-D connector, Detachable  
Dimensions (W x H x D) / Weight (Simple Stand)  
579.1 x378.2 x 75.6 mm / 22.8 x 14.9 x 3.0 inch (Without Stand)  
579.1 x 428.0 x 218.6 mm / 22.8 x 16.9 x 8.6 inch (With Stand), 5.6 kg / 12.3 lbs  
VESA Mounting Interface  
100 mm x 100 mm (For use with Specialty(Arm) Mounting hardware.)  
Environmental considerations  
Temperature : 50°F ~ 104°F (10°C ~ 40°C)  
Operating  
Humidity : 10 % ~ 80 %, non-condensing  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)  
Humidity : 5 % ~ 95 %, non-condensing  
Storage  
Plug and Play Capability  
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the  
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor  
installation will proceed automatically, unless the user wishes to select alternate settings.  
Dot Acceptable  
TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth)  
above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright  
sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.  
Note  
Design and specifications are subject to change without prior notice.  
Class B Equipment (Information Communication equipment for residential use)  
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas  
including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PowerSaver  
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor  
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal  
operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or  
when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in  
your computer. Use the software utility installed on your computer to set up this feature.  
Power off (Power button)  
State  
Normal Operation  
Power saving mode  
EPA/ENERGY 2000  
Power Indicator  
On  
Blinking  
Off  
Power Consumption  
44 watts  
Less than 1 watts  
®
Less than 1 watts  
This monitor is EPA ENERGY STAR compliant and ENERGY2000 compliant when used with  
a computer equipped with VESA DPM functionality.  
®
As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the  
®
ENERGY STAR guidelines for energy efficiency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Preset Timing Modes  
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted  
automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual  
and adjusts the screen as follows.  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency (Hz)  
Pixel Clock  
(MHz)  
Sync Polarity  
(H/V)  
Display Mode  
VESA, 640 x 480  
VESA, 800 x 600  
VESA, 800 x 600  
VESA,1024 x 768  
VESA, 1280 x 800  
VESA, 1280 X 960  
VESA, 1280 X 1024  
VESA,1440 x 900  
VESA,1600 X 1200  
VESA, 1680 x 1050  
VESA, 1920 X 1200  
31,469  
35,156  
37,879  
48,363  
49,702  
60,000  
63,981  
55,935  
75,000  
65,290  
74,556  
59,940  
56,250  
60,317  
60,004  
59,810  
60,000  
60,020  
59,887  
60,000  
59,954  
59,885  
25,175  
36,000  
-/-  
+/+  
+/+  
-/-  
40,000  
65,000  
83,500  
-/+  
+/+  
+/+  
-/+  
+/+  
-/+  
-/+  
108,000  
108,000  
106,500  
162,000  
146,250  
193,250  
Horizontal Frequency  
The time to scan one line connecting the right edge to the left edge of the  
screen horizontally is called the Horizontal Cycle and the inverse number of  
the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz  
Vertical Frequency  
Like a fluorescent lamp, the screen has to repeat the same image many times  
per second to display an image to the user. The frequency of this repetition is  
called the Vertical Frequency or Refresh Rate. Unit: Hz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Information  
For Better Display  
Adjust the computer resolution and screen injection rate (refresh rate) on the computer  
as described below to enjoy the best picture quality. You can have an uneven picture quality  
on screen if the best picture quality is not provided for TFT-LCD.  
Resolution: **** x ****  
Vertical frequency (refresh rate): 60 Hz  
TFT-LCD panels manufactured by using advanced semiconductor technology with a  
precision of 1ppm (one millionth) and above is used for this product. But the pixels of RED,  
GREEN, BLUE and WHITE color seem to be bright sometimes or some of black pixels  
could be seen. This is not from bad quality and you can use it without any problems.  
When cleaning the monitor and the panel outside, please apply the recommended small  
amount of cleaner by using a soft cloth to polish. Do not force the LCD area but rub softly.  
If excessive force is applied, you may stain it.  
If you are not satisfied with the picture quality, you can get better quality of picture by  
performing the "Auto Adjustment function" in display screen that is appeared as window  
termination button is pressed.  
If there's still noise after the automatic adjustment, use the Fine/Coarse adjustment func-  
tion.  
When viewing a fixed screen for an extended period of time, a residual image or blur-  
riness may appear.  
Change the mode to energy save or set a screensaver to move the picture when you need  
to be away from the monitor for an extended period of time.  
PRODUCT INFORMATION (Image Retention Free)  
LCD Monitors and TVs may have image retention when switching from one image to another espe-  
cially after displaying a stationary image for a long time.  
This guide is to demonstrate correct usage of LCD products in order to protect them from Image  
retention.  
Warranty  
Warranty does not cover any damage caused by image retention.  
Burn-in is not covered by the warranty.  
What is Image retention ?  
During normal operation of a LCD panel, pixel image retention doesn't occur. However, if  
the same image is displayed for a long time, a slight difference in electric charge accumu-  
lates between the two electrodes which encase the liquid crystal. This may cause the liquid  
crystal to build up in a certain areas of the display. Thus, the previous image is retained  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Information  
when switching to a new video image. All display products, including LCD, are subject to  
image retention. This is not a product defect.  
Please follow the suggestions below to protect your LCD from image retention.  
Power Off, Screen Saver, or Power Save Mode  
Ex)  
Turn the power off when using a stationary pattern.  
Turn the power off for 4 hours after 20 hours in use  
Turn the power off for 2 hours after 12 hours in use  
Use a Screen saver if possible  
Screen saver in one color or a moving image is recommended.  
Set the Monitor to power off with the PC Display Properties Power Scheme.  
Suggestions for specific applications  
Ex) Airports, Transit Stations, Stock Markets, Banks, and Controlling Systems We recom-  
mend that you follow set up of your display system program as below:  
Display Information together with Logo or Moving image cycle.  
Ex) Cycle : Display Information for 1 hour followed by a Display Logo or moving image  
for 1 minute.  
Change the Color Information periodically (Use 2 different colors).  
Ex) Rotate the Color Information with 2 colors every 30 minutes.  
Avoid using a combination of characters and background color with large difference in  
luminance.  
Avoid using Grey colors, which can cause Image retention easily.  
Avoid: Colors with big difference in luminance (Black & White, Grey)  
Ex)  
Recommended settings: Bright colors with little difference in luminance  
Change the characters color and background color every 30 minutes  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Information  
Ex)  
Every 30 minutes, change the characters with movement.  
Ex)  
The best way to protect your monitor from Image retention is to set your PC or System  
to operate a Screen Saver program when you are not using it.  
Image retention may not occur when a LCD panel is operated under normal conditions.  
Normal conditions are defined as continuously changing video patterns. When the LCD  
panel is operated for a long time with a fixed pattern (-over 12 hours-), there may be slight  
difference in voltage between electrodes that work the liquid crystal (LC) in a pixel. The  
voltage difference between electrodes increases with time, forcing the liquid crystal to lean.  
When this occurs, the previous image may be seen when the pattern is changed.  
To prevent this, the accumulated voltage difference must be decreased.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Information  
Our LCD Monitor satisfies ISO13406-2 Pixel fault Class II  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Contact SAMSUNG WORLDWIDE  
Note  
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG  
customer care center.  
North America  
U.S.A  
1-800-SAMSUNG(726-7864) http://www.samsung.com/us  
1-800-SAMSUNG(726-7864) http://www.samsung.com/ca  
01-800-SAMSUNG(726-7864) http://www.samsung.com/mx  
CANADA  
MEXICO  
Latin America  
ARGENTINA  
BRAZIL  
0800-333-3733  
0800-124-421  
4004-0000  
CHILE  
800-SAMSUNG(726-7864)  
01-8000112112  
0-800-507-7267  
1-800-10-7267  
800-6225  
COLOMBIA  
COSTA RICA  
ECUADOR  
EL SALVADOR  
GUATEMALA  
HONDURAS  
JAMAICA  
1-800-299-0013  
800-7919267  
1-800-234-7267  
00-1800-5077267  
800-7267  
NICARAGUA  
PANAMA  
PUERTO RICO  
REP. DOMINICA  
1-800-682-3180  
1-800-751-2676  
TRINIDAD & TO- 1-800-SAMSUNG(726-7864) http://www.samsung.com/latin  
BAGO  
VENEZUELA  
0-800-100-5303  
Europe  
AUSTRIA  
BELGIUM  
0810 - SAMSUNG(7267864, € http://www.samsung.com/at  
0.07/min)  
02 201 2418  
(Dutch)  
(French)  
CZECH REPUBLIC 800 - SAMSUNG (800-726786) http://www.samsung.com/cz  
DENMARK  
EIRE  
8 - SAMSUNG (7267864)  
0818 717 100  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Europe  
FINLAND  
FRANCE  
30 - 6227 515  
01 4863 0000  
GERMANY  
01805 - SAMSUNG (7267864, € http://www.samsung.de  
0.14/Min)  
HUNGARY  
ITALIA  
06-80-SAMSUNG(726-7864) http://www.samsung.com/hu  
800-SAMSUNG(726-7864)  
02 261 03 710  
LUXEMBURG  
NETHERLANDS  
0900  
-
(0900-7267864) (€ 0.10/Min)  
3 - SAMSUNG (7267864)  
0 801 1SAMSUNG (172678)  
NORWAY  
POLAND  
022 - 607 - 93 - 33  
PORTUGAL  
SLOVAKIA  
SPAIN  
808 20 - SAMSUNG (7267864) http://www.samsung.com/pt  
0800-SAMSUNG(726-7864) http://www.samsung.com/sk  
902 - 1 - SAMSUNG (902 172 http://www.samsung.com/es  
678)  
SWEDEN  
075 - SAMSUNG (726 78 64) http://www.samsung.com/se  
SWITZERLAND  
0848-SAMSUNG(7267864,  
CHF 0.08/min)  
U.K  
0845 SAMSUNG (7267864)  
CIS  
800-7267  
ESTONIA  
LATVIA  
8000-7267  
LITHUANIA  
KAZAKHSTAN  
KYRGYZSTAN  
RUSSIA  
8-800-77777  
8-10-800-500-55-500  
00-800-500-55-500  
8-800-555-55-55  
8-10-800-500-55-500  
8-800-502-0000  
8-10-800-500-55-500  
TADJIKISTAN  
UKRAINE  
UZBEKISTAN  
Asia Pacific  
1300 362 603  
AUSTRALIA  
CHINA  
800-810-5858  
400-810-5858  
010-6475 1880  
HONG KONG:3698 - 4698  
3030 8282  
INDIA  
1800 110011  
1-800-3000-8282  
0800-112-8888  
INDONESIA  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Asia Pacific  
JAPAN  
0120-327-527  
1800-88-9999  
MALAYSIA  
NEW ZEALAND  
0800 SAMSUNG (0800 726 http://www.samsung.com/nz  
786)  
PHILIPPINES  
1800-10-SAMSUNG(726-7864) http://www.samsung.com/ph  
1800-3-SAMSUNG(726-7864)  
02-5805777  
SINGAPORE  
THAILAND  
1800-SAMSUNG(726-7864)  
1800-29-3232  
02-689-3232  
0800-329-999  
1 800 588 889  
TAIWAN  
VIETNAM  
Middle East & Africa  
0860-SAMSUNG(726-7864)  
444 77 11  
SOUTH AFRICA  
TURKEY  
U.A.E  
800-SAMSUNG(726-7864)  
8000-4726  
Terms  
Dot Pitch  
The image on a monitor is composed of red, green and blue dots.  
The closer the dots, the higher the resolution. The distance be-  
tween two dots of the same color is called the 'Dot Pitch'. Unit:  
mm  
Vertical Frequency  
The screen must be redrawn several times per second in order to  
create and display an image for the user. The frequency of this  
repetition per second is called the Vertical Frequency or Refresh  
Rate. Unit: Hz  
Example: If the same light repeats itself 60 times per second, this  
is regarded as 60 Hz.  
Horizontal Frequency  
The time to scan one line connecting the right edge to the left edge  
of the screen horizontally is called the Horizontal Cycle. The in-  
verse number of the Horizontal Cycle is called Horizontal Fre-  
quency. Unit: kHz  
Interlace and Non-Interlace  
Methods  
Showing the horizontal lines of the screen from the top to the bot-  
tom sequentially is called the Non-Interlace method while show-  
ing odd lines and then even lines in turn is called the Interlace  
method. The Non-Interlace method is used for the majority of  
monitors to ensure a clear image. The Interlace method is the same  
as that used in TVs.  
Plug & Play  
This is a function that provides the best quality screen for the user  
by allowing the computer and the monitor to exchange informa-  
tion automatically. This monitor follows the international standard  
VESA DDC for the Plug & Play function.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Resolution  
The number of horizontal and vertical dots used to compose the  
screen image is called the 'resolution'. This number shows the ac-  
curacy of the display. A high resolution is good for performing  
multiple tasks as more image information can be shown on the  
screen.  
Example: If the resolution is **** x ****, this means the screen  
is composed of **** horizontal dots (horizontal resolution) and  
**** vertical lines (vertical resolution).  
Correct Disposal  
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) -  
Europe only  
(Applicable in the European Union and other European  
countries with separate collection systems)  
This marking on the product, accessories or literature in-  
dicates that the product and its electronic accessories (e.g.  
charger, headset, USB cable) should not be disposed of  
with other household waste at the end of their working life.  
To prevent possible harm to the environment or human  
health from uncontrolled waste disposal, please separate  
these items from other types of waste and recycle them  
responsibly to promote the sustainable reuse of material  
resources.  
Household users should contact either the retailer where  
they purchased this product, or their local government of-  
fice, for details of where and how they can take these items  
for environmentally safe recycling.  
Business users should contact their supplier and check the  
terms and conditions of the purchase contract. This prod-  
uct and its electronic accessories should not be mixed with  
other commercial wastes for disposal.  
Authority  
Information in this document is subject to change without notice.  
© 2009 Samsung Electronics Co., Ltd. All rights reserved.  
Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co.,  
Ltd. is strictly forbidden.  
Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or con-  
sequential damages in connection with the furnishing, performance, or use of this material.  
Samsung is the registered trademark of Samsung Electronics Co., Ltd.; Microsoft, Windows and Win-  
dows NT are registered trademarks of Microsoft Corporation; VESA, DPM and DDC are registered  
trademarks of Video Electronics Standard Association; the ENERGY STAR® name and logo are reg-  
istered trademarks of the U.S. Environmental Protection Agency (EPA). As an ENERGY STAR®  
Partner, Samsung Electronics Co., Ltd. has determined that this product meets the ENERGY  
STAR® guidelines for energy efficiency. All other product names mentioned herein may be the trade-  
marks or registered trademarks of their respective owners.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  

QVS Surge Protector PP136M User Guide
Radio Shack Battery Charger 23 334 User Guide
Radio Shack Mixer 60 2785 User Guide
Radio Shack Telephone TAD 1004 User Guide
RCA CRT Television LIFE 133 User Guide
Samson Headphones SP50P User Guide
Samsung Printer 550 User Guide
Sanyo Projector Accessories PLV 1080HD User Guide
Schumacher Battery Charger SCF 2500A User Guide
Sennheiser Automobile Accessories SR350 IEM User Guide