SyncMaster 2032NW
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not pull the plug out by the wire nor touch the plug with wet hands.
This may cause electric shock or fire.
Use only a properly grounded plug and receptacle.
An improper ground may cause electric shock or equipment damage. (Class l
Equipment only.)
Insert the power plug firmly so that it does not come loose.
A bad connection may cause fire.
Do not bend the plug excessively and wire nor place heavy objects upon them, which
could cause damage.
This may cause electric shock or fire.
Do not connect too many extension cords or plugs to one outlet.
This may cause fire.
Do not disconnect the power cord while using the monitor.
A surge may be caused by the separation and may damage the monitor.
Do not use the power cord when the connector or plug is dusty.
If the connector or plug of the power cord is dusty, clean it with a dry cloth.
Using the power cord with a dusty plug or connector may cause an electric shock
or fire.
To disconnect the apparatus from the mains, the plug must be pulled out from the
mains socket, therefore the mains plug shall be readily operable.
Download from Www.Somanuals.com. All Manuals Search And Download.
This may cause electric shock or fire.
Installation
Be sure to contact an authorized Service Center, when installing your monitor in a
location with heavy dust, high or low temperatures, high humidity, and exposed to
chemical substances and where it operates for 24 hours such as at airports, train
stations etc.
Failure to do so may cause serious damage to your monitor.
Place your monitor in a location with low humidity and a minimum of dust.
Failure to do so may cause electric shock or fire inside the monitor.
Do not drop the monitor when moving it.
This may cause damage to the product or the person carrying it.
Install the monitor base in a showcase or shelf so that the end of the base does not
protrude from the showcase or shelf.
Dropping the product may cause damage to the product or the person carrying it.
Do not place the product on the floor.
Take care, as someone, specifically children may trip over it.
Do not place the product on an unstable or small surface area.
Place the product on an even and stable surface, as the product may fall and
cause harm to someone walking by, specifically children.
TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN
FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.
Otherwise, this may cause fire.
Download from Www.Somanuals.com. All Manuals Search And Download.
Keep any heating devices away from the power cable.
A melted coating may cause electric shock or fire.
Do not install the product in places with poor ventilation, for instance, a bookshelf,
closet, etc.
Any increase in the internal temperature may cause fire.
Put down the monitor carefully.
Failing to do so may damage the monitor.
Do not place the monitor face down.
This may damage the TFT-LCD surface.
The installation of the bracket must be done by a qualified professional.
Installing the bracket by unqualified personnel may result in injury.
Always use the mounting device specified in the owner's manual.
When installing the product, make sure to keep it away from the wall (more than 10
cm/4 inches) for ventilation purposes.
Poor ventilation may cause an increase in the internal temperature of the product,
resulting in a shortened component life and degraded performance.
Do not disconnect the power cord while using the monitor.
A surge may be caused by the separation and may damage the monitor.
Keep the plastic packaging (bag) out of children's reach.
The plastic packaging (bag) may cause suffocation if children play with it.
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Using
When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with a
slightly moistened, soft fabric.
Do not spray water or detergent directly onto the monitor.
This may cause damage, electric shock or fire.
Use the recommended detergent with a smooth cloth.
If the connector between the plug and the pin is dusty or dirty, clean it properly using
a dry cloth.
A dirty connector may cause electric shock or fire.
Make sure to unplug the power cord before cleaning the product.
Otherwise, this may cause electric shock or fire.
Unplug the power cord from the power outlet and wipe the product using a soft, dry
cloth.
Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air
freshener, lubricant or detergent.
Contact the SAMSUNG customer care center or Customer Center for interior
cleaning once a year.
Keep the product's interior clean.
Dust which has accumulated in the interior over an extended period of time may
cause a malfunction or fire.
Others
Do not remove the cover (or back).
Download from Www.Somanuals.com. All Manuals Search And Download.
This may cause electric shock or fire.
Refer to a qualified servicing company.
If your monitor does not operate normally - in particular, if there is any unusual sound
or smell coming from the monitor - unplug it immediately and the Service Center.
This may cause electric shock or fire.
Keep the product away from places exposed to oil, smoke or moisture; do not install
inside a vehicle.
This may cause a malfunction, electric shock or fire.
In particular, avoid operating the monitor near water or outdoors where it could be
exposed to snow or rain.
If the monitor is dropped or the casing is damaged, turn the monitor off and unplug
the power cord. Then contact the Service Center.
The monitor may malfunction, causing electric shock or fire.
Disconnect the plug from the outlet during storms or lightning or if it is not used for a
long period of time.
Failure to do so may cause electric shock or fire.
Do not try to move the monitor by pulling only the wire or the signal cable.
This may cause a breakdown, electric shock or fire due to damage to the cable.
Do not move the monitor right or left by pulling only the wire or the signal cable.
This may cause a breakdown, electric shock or fire due to damage to the cable.
Do not cover the vents on the monitor cabinet.
Bad ventilation may cause a breakdown or fire.
Do not place water containers, chemical products or small metal objects on the
monitor.
Download from Www.Somanuals.com. All Manuals Search And Download.
This may cause a malfunction, electric shock or fire.
If a foreign substance enters the monitor, unplug the power cord and contact the
Service Center.
Keep the product away from combustible chemical sprays or inflammable
substances.
This may cause an explosion or fire.
Never insert anything metallic into the monitor openings.
This may cause electric shock, fire or injury.
Do not insert metal objects such as chopsticks, wire and tools or inflammable objects
such as paper or matches into the vent, headphone port or AV ports or etc.
This may cause electric shock or fire.
If an alien substances or water enters the product, turn the product off, unplug the
power connector from the wall outlet and contact the Service Center.
When viewing a fixed screen for an extended period of time, residual image or
blurriness may appear.
Change the mode to energy saving mode or set a screensaver to a changing
picture when away from the monitor for an extended period of time.
Adjust the resolution and frequency to the level appropriate for the model.
An inappropriate resolution may cause undesirable picture quality.
20 inch Wide (51 cm) - 1680 x 1050
Viewing the monitor continuously at a too close angle may result in damage to your
eyesight.
To ease eye strain, take at least a five-minute break after every hour of using the
monitor.
Do not install the product on an unstable, uneven surface or a location prone to
vibrations.
Download from Www.Somanuals.com. All Manuals Search And Download.
Dropping the product may cause damage to the product or the person carrying it.
Using the product in a location prone to vibrations may shorten the lifetime of the
product or may cause the product to catch fire.
When moving the monitor, turn off and unplug the power cord. Make sure that all
cables, including the antenna cable and cables connected to other devices, are
disconnected before moving the monitor.
Failure to disconnect cables may damage it and cause fire or electric shock.
Place the product out of children's reach, as they could damage by hanging onto it.
A falling product may cause injury to the person or even fatality.
When not using the product for an extended period of time, keep the product
unplugged.
Otherwise, this may cause heat emission from the accumulated dirt or degraded
insulation, causing electric shock or fire.
Do not place your children's favorite toys or any other objects of interest on the
product.
Children may try to climb on the product to retrieve an object.
The product could fall, causing injury or even fatality.
When lifting up or moving the monitor, do not lift the monitor upside down while
holding only the stand.
This may cause your monitor to fall, and become damaged or cause personal
injury.
Good Postures When Using the Monitor
Try to maintain a good posture when using the monitor.
z
Keep your back straight.
z
Keep a distance of about 45 ~ 50 cm between your eyes and the
monitor screen. Look at the screen from slightly above it, and have
the monitor directly in front of you.
Tilt the monitor upwards by 10 ~20 degrees. Adjust the monitor
z
height so that the top of the monitor is slightly below eye level.
Adjust the monitor angle so that there is no reflected light on the
z
screen.Try to maintain your arms perpendicular to your armpits.
Keep your arms level with the back of your hands.
z
z
Keep the angle of the elbow perpendicular.
Keep the angle of the knees at more than 90 degree. Do not let your
z
feet fall up from the floor. Adjust the arm position so that it is below
the heart.
Download from Www.Somanuals.com. All Manuals Search And Download.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment) - Europe only
(Applicable in the European Union and other European countries with
separate collection systems)
This marking shown on the product or its literature, indicates that it should not
be disposed with other household wastes at the end of its working life. To
prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this
product, or their local government office, for details of where and how they
can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product should not be mixed with
other commercial wastes for disposal.
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT INFORMATION (Image Retention Free)
LCD Monitors and TVs may have an image retention when switching from one image to another
especially after displaying a stationary image for a long time.
This guide is to demonstrate a correct usage of LCD products in order to protect them from
Image retention.
Warranty
Warranty does not cover any damage caused by image retention.
Burn-in is not covered by the warranty.
What is Image retention ?
During normal operation of a LCD panel, pixel image retention doesn't occur. However,
if the same image is displayed for a long time, a slight difference in electric charge
accumulates between the two electrodes which encase the liquid crystal. This may
cause the liquid crystal to build up in a certain areas of the display. Thus, the previous
image is retained when switching to a new video image. All display products, including
LCD,are subject to image retention. This is not a product defect.
Please follow the suggestions below to protect your LCD from image retention
Power Off, Screen Saver, or Power Save Mode
Ex)
z
Turn the power off when using a stationary pattern.
- Turn the power off for 4 hours after 20 hours in use
- Turn the power off for 2 hours after 12 hours in use
z
z
Use a Screen saver if possible
- Screen saver in one color or a moving image is recommended.
Set the Monitor to power off with the PC Display Properties Power Scheme.
Suggestions for specific applications
Ex) Airports, Transit Stations, Stock Markets, Banks, and Controlling Systems
We recommend that you follow set up of your display system program as below:
Display Information together with Logo or Moving image cycle.
Ex) Cycle : Display Information for 1 hour followed by a
Display Logo or moving image for 1 minute.
Change the Color Information periodically (Use 2 different colors).
Ex) Rotate the Color Information with 2 colors every 30 minutes.
Avoid using a combination of characters and background color with large
difference in luminance.
Avoid using Grey colors, which can cause Image retention easily.
z
Avoid: Colors with big difference in luminance (Black & White, Grey)
Ex)
z
Recommended settings: Bright colors with little difference in luminance
- Change the characters color and background color every 30 minutes
Ex)
- Every 30 minutes, change the characters with movement.
Download from Www.Somanuals.com. All Manuals Search And Download.
Ex)
The best way to protect your monitor from Image retention is to set your PC or
System to operate a Screen Saver program when you are not using it.
Image retention may not occur when a LCD panel is operated under normal conditions.
Normal conditions are defined as continuously changing video patterns. When the LCD
panel is operated for a long time with a fixed pattern (-over 12 hours-), there may be
slight difference in voltage between electrodes that work the liquid crystal (LC) in a
pixel. The voltage difference between electrodes increases with time, forcing the liquid
crystal to lean. When this occurs, the previous image may be seen when the pattern is
changed.
To prevent this, the accumulated voltage difference must be decreased.
Our LCD Monitor satisfies ISO13406-2 Pixel fault Class II
Download from Www.Somanuals.com. All Manuals Search And Download.
Model
Package Contents
Please make sure the following items are included with your monitor.
If any items are missing, contact your dealer.
Contact a local dealer to buy optional items.
Unpacking
Monitor & Simple stand
Manual
Warranty Card
(Not available in all
locations)
User's Guide, Monitor Driver,
Quick Setup Guide
Natural Color software,
MagicTune™ software
Cable
Power Cord
D-sub Cable
Others
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning Cloth
Will be applied to black and high gloss models only.
Your Monitor
Front
MENU button [
]
Opens the on-screen menu and exits from the menu.
MagicBright™ button
MagicBright™ is a new feature providing optimum viewing
environment depending on the contents of the image you are
watching. Currently seven different modes are available: Custom,
Text, Internet, Game, Sport, Movie and Dynamic Contrast. Each
mode has its own pre-configured brightness value. You can easily
select one of seven settings by simply pressing MagicBright™ control
button.
[
]
1) Custom
Although the values are carefully chosen by our engineers, the
pre-configured values may not be comfortable to your eyes
depending on your taste.
If this is the case, adjust the brightness and contrast by using the
OSD menu.
2) Text
Download from Www.Somanuals.com. All Manuals Search And Download.
For documentations or works involving heavy text.
3) Internet
For working with a mixture of images such as texts and graphics.
4) Game
For watching motion pictures such as a game.
5) Sport
For watching motion pictures such as a sport.
6) Movie
For watching motion pictures such as a DVD or Video CD.
7) Dynamic Contrast
Dynamic Contrast is to automatically detect distribution of inputted
visual signal and adjust to create optimum contrast.
>> Click here to see an animation clip
Brightness button [ ]
When OSD is not on the screen, push the button to adjust brightness.
>> Click here to see an animation clip
Not available in MagicBright mode of Dynamic Contrast.
Adjust buttons [
Enter button [
AUTO button
]
Adjust items in the menu.
]
Activates a highlighted menu item.
Use this button for auto adjustment.
>> Click here to see an animation clip
Power button [ ]
Power indicator
Use this button for turning the monitor on and off.
This light glows blue during normal operation, and blinking blue once
as the monitor saves your adjustments.
See PowerSaver described in the manual for further information regarding power saving
functions. For energy conservation, turn your monitor OFF when it is not needed, or
when leaving it unattended for long periods.
Rear
The configuration at the back of the monitor may vary from product to product.
POWER port
RGB IN port
Kensington Lock
Connect the power cord for your monitor to the power port on the back of the
monitor.
Connect the signal cable to the 15-pin, D-sub port on the back of your
monitor.
The Kensington lock is a device used to physically fix the system when using
it in a public place.
The locking device has to be purchased separately.
Download from Www.Somanuals.com. All Manuals Search And Download.
For using a locking device, contact where you purchase it.
See Connecting Cables for further information regarding cable connections.
Download from Www.Somanuals.com. All Manuals Search And Download.
Model
Connecting Cables
Connect the power cord for your monitor to the power port on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
Use appropriate connection for your computer.
Using the D-sub (Analog) connector on the video card.
- Connect the signal cable to the 15-pin, D-sub port on the back of your monitor.
[RGB IN]
Connected to a Macintosh.
- Connect the monitor to the Macintosh computer using the D-sub connection cable.
Turn on your computer and monitor. If your monitor displays an image, installation is completed.
Using the Stand
Folding the base
You can tilt the monitor upwards at an angle of 0° to18°.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Model
Monitor Driver
When prompted by the operating system for the monitor driver, insert the CD-ROM included with this
monitor. Driver installation is slightly different from one operating system to another. Follow the
directions appropriate for the operating system you have.
Prepare a blank disk and download the driver program file at the Internet web site shown below.
http://www.samsung.com/monitor (U.S.A)
http://www.sec.co.kr/monitor (Korea)
Installing the Monitor Driver (Automatic)
Insert the CD into the CD-ROM drive.
Click "Windows".
Choose your monitor model in the model list, then click the "OK" button.
If you can see following message window, then click the "Continue Anyway" button. Then click the
®
®
"OK" button (Microsoft Windows XP/2000 Operating System).
Download from Www.Somanuals.com. All Manuals Search And Download.
This monitor driver is under certifying MS logo, and this installation doesn't damage your
system.
The certified driver will be posted on Samsung Monitor homepage
Monitor driver installation is completed.
Installing the Monitor Driver (Manual)
Windows Vista | Windows XP | Windows 2000 | Windows ME | Windows NT | Linux
Microsoft® Windows Vista™ Operating System
Insert your Manual CD into your CD-ROM drive.
Click
(Start) and "Control Panel". Then, double-click on "Appearance and Personalization".
Click "Personalization" and then "Display Settings".
Click "Advanced Settings…".
Click "Properties" in the "Monitor" tab. If the "Properties" button is deactivated, it means the
configuration for your monitor is completed. The monitor can be used as is.
If the message “Windows needs…” is displayed, as shown in the figure below,
click "Continue".
Download from Www.Somanuals.com. All Manuals Search And Download.
This monitor driver is under certifying MS logo, and this installation doesn't damage your
system.
The certified driver will be posted on Samsung Monitor homepage
Click "Update Driver…" in the "Driver" tab.
Check the "Browse my computer for driver software" checkbox and click "Let me pick from a list
of device drivers on my computer".
Click "Have Disk…" and select the folder (for example, D:\Drive) where the driver setup file is
located, and click "OK".
Select the model that matches your monitor from the list of monitor models on the screen, and
click "Next".
Download from Www.Somanuals.com. All Manuals Search And Download.
→
Click "Close" "Close"
→
→
"OK"
"OK" on the following screens displayed in sequence.
®
®
Microsoft Windows XP Operating System
Insert the CD into the CD-ROM drive.
→
Click "Start"
"Control Panel" then click the "Appearance and Themes" icon.
Click "Display" icon and choose the "Settings" tab then click "Advanced."
Download from Www.Somanuals.com. All Manuals Search And Download.
Click the "Properties" button on the "Monitor" tab and select "Driver" tab.
Click "Update Driver." and select "Install from a list or." then click the "Next" button.
Select "Don't search ,I will." then click "Next" and then click "Have disk".
Click the "Browse" button then choose A:(D:\Driver) and choose your monitor model in the model
list and click the "Next" button.
Download from Www.Somanuals.com. All Manuals Search And Download.
If you can see following "Message" window, then click the "Continue Anyway" button. Then click
the "OK" button.
This monitor driver is under certifying MS logo, and this installation doesn't damage your
system.
The certified driver will be posted on Samsung Monitor homepage
Click the "Close" button then click the "OK" button continually.
Monitor driver installation is completed.
®
®
Microsoft Windows 2000 Operating System
When you can see "Digital Signature Not Found" on your monitor, follow these steps.
Choose the "OK" button on the "Insert disk" window.
Click the "Browse" button on the "File Needed" window.
Choose A:(D:\Driver) then click the "Open" button and then click the "OK" button.
Download from Www.Somanuals.com. All Manuals Search And Download.
How to install
Click "Start," "Setting," and then "Control Panel."
Double click the "Display" icon.
Select the "Settings" tab and click the "Advanced Properties" button.
Choose "Monitor."
Case1 : If the "Properties" button is inactive, it means your monitor is properly configured. Please
stop installation
Case2 : If the "Properties" button is active, click the "Properties" button then follow next steps
continually.
Click "Driver" and then click "Update Driver." then click the "Next" button.
Choose "Display a list of the known drivers for this device so that I can choose a specific driver"
then click "Next" and then click "Have disk".
Click the "Browse" button then choose A:(D:\Driver).
Click the "Open" button, then click the "OK" button.
Choose your monitor model and click the "Next" button then click "Next" button.
Click the "Finish" button then the "Close" button.
If you can see the "Digital Signature Not Found" window then click the "Yes" button. And click the
"Finish" button then the "Close" button.
®
®
Microsoft Windows Millennium Operating System
Click "Start," "Setting," and then "Control Panel."
Double click the "Display" icon.
Select the "Settings" tab and click the "Advanced Properties" button.
Select the "Monitor" tab.
Click the "Change" button in the "Monitor Type" area.
Choose "Specify the location of the driver."
Choose "Display a list of all the driver in a specific location." then click the "Next" button.
Click the "Have Disk" button.
Specify A:\(D:\driver) then click the "OK" button.
Select "Show all devices" and choose the monitor that corresponds to the one you connected to
your computer and click "OK".
Continue choosing "Close" button and "OK" button until you close the Display Properties dialogue
box.
®
®
Microsoft Windows NT Operating System
Click "Start," "Settings," "Control Panel," and then double-click "Display" icon.
In the Display Registration Information window, click the Settings tab and then click "All Display
Modes".
Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency) and
then click "OK".
Click the "Apply" button if you see the screen working normally after clicking "Test". If the screen
is not normal, change to a different mode (lower mode of resolution, colors, or frequency).
If there is no Mode at All Display Modes, select the level of resolution and vertical
frequency by referring to the Preset Timing Modes in the user guide.
Linux Operating System
To execute X-Window, you need to make the X86Config file, which is a type of system setting file.
Press "Enter" at the first and the second screen after executing the X86Config file.
The third screen is for setting your mouse.
Set a mouse for your computer.
The next screen is for selecting a keyboard.
Set a Keyboard for your computer.
The next screen is for setting your monitor.
First of all, set a horizontal frequency for your monitor. (You can enter the frequency directly.)
Set a vertical frequency for your monitor. (You can enter the frequency directly.)
"Enter" the model name of your monitor. This information will not affect the actual execution of X-
Window.
You have finished setting up your monitor.
Execute X-Window after setting other requested hardware.
Download from Www.Somanuals.com. All Manuals Search And Download.
Natural Color
Natural Color
One of the recent problems in using a computer is that the color of the images printed out by a printer
or other images scanned by a scanner or a digital camera are not the same as those shown on the
monitor.
the Natural Color S/W is the very solution for this problem. It is a color administration system
developed by Samsung Electronics in association with Korea Electronics & Telecommunications
Research Institute (ETRI).
This is only available for Samsung monitors and ensures that the color of the images on the monitor
are the same as the printed or scanned images.
For more information, refer to Help (F1) in the software program.
Installing the Natural Color Software
Insert the CD included with the Samsung monitor into the CD-ROM Drive. The initial Natural Color
screen will appear. Click on Natural Color in the startup window to install the Natural Color software.
To install the program manually, insert the CD included with the Samsung monitor into the CD-ROM
Drive, click the Windows [Start] button, select [Run...] .
Enter D:\Color\NCProSetup.exe and then press the <Enter> key.
(If the drive where the CD is inserted is not D:\, enter the applicable drive.)
Uninstalling the Natural Color Software Program
Select "Settings" / "Control Panel" from the "Start" menu and then double-click "Add/Delete a
program"
Select Natural Color from the list and then click the "Add/Delete" button.
MagicTune™
Installation
1. Insert the installation CD into the CD-ROM drive.
2. Click the MagicTune™ installation file.
3. Select installation Language, Click "Next".
4. When the Installation Shield Wizard window appears, click "Next."
5. Select "I agree to the terms of the license agreement" to accept the terms of use.
6. Choose a folder to install the MagicTune™ program.
7. Click "Install."
8. The "Installation Status" window appears.
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Click "Finish."
10. When the installation is complete, the MagicTune™ executable icon appears on your desktop.
Double-click the icon to start the program.
MagicTune™ execution icon may not appear depending on specification
of computer system or monitor.
If that happens, press F5 Key.
Installation Problems (MagicTune™)
The installation of MagicTune™ can be affected by such factors as the video card, motherboard and the
network environment.
System Requirements
OS
z
Windows 2000
z
Windows XP Home Edition
z
Windows XP Professional
Windows Vista™
z
It is recommended using MagicTune™ in Windows® 2000
or later.
Hardware
z
32MB Memory above
z
60MB Hard disk space above
* For more information, visit the MagicTune™ website.
Uninstall
The MagicTune™ program can be removed only by using the "Add or Remove Programs" option of the
Windows® Control Panel.
Perform the following steps remove MagicTune™.
1. Go to [Task Tray] ' [Start] ' [Settings] and select [Control Panel] in the menu. If the program runs on
Windows® XP, go to [Control Panel] in the [Start] menu.
2. Click the "Add or Remove Programs" icon in Control Panel.
3. In the "Add or Remove Programs" screen, scroll down to find "MagicTune™". Click on it to highlight it.
4. Click the "Change/Remove" button to remove the program.
5. Click "Yes" to begin the uninstall process.
6. Wait until the "Uninstall Complete" dialog box appears.
Visit the MagicTune™ website for technical support for MagicTune™, FAQs (questions and answers) and
software upgrades.
Download from Www.Somanuals.com. All Manuals Search And Download.
Model
Control Buttons
[MENU /
]
Opens the OSD menu. Also use to exit the OSD menu or return to the previous menu.
[
[
]
These buttons allow you to adjust items in the menu.
Press this button to activate a highlighted menu item.
]
[AUTO]
When the 'AUTO' button is pressed, the Auto Adjustment screen appears as shown in
the animated screen on the center.
Direct Functions
AUTO
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu
Description
When the 'AUTO' button is pressed, the Auto Adjustment screen appears as
shown in the animated screen on the center.
Auto adjustment allows the monitor to self-adjust to the incoming Analog signal.
The values of fine, coarse and position are adjusted automatically.
(Available in Analog mode only)
To make the automatic adjustment function sharper, execute the 'AUTO' function
while the AUTO PATTERN is on.
AUTO
If auto adjustment does not work properly, press 'AUTO' button again to adjust
picture with more accuracy.
If you change resolution in the control panel, auto function will be executed
automatically.
OSD Locked & Unlock
In case of pushing AUTO button after locking OSD
Download from Www.Somanuals.com. All Manuals Search And Download.
In case of pushing MENU button after locking OSD
Menu
Description
This is the function that locks the OSD in order to keep the current states of
settings or prevent others from adjusting the current settings.
Locked : Hold down the menu button for more than five seconds to activate the
OSD adjustment lock function.
OSD Locked &
Unlock
Unlock : Hold down the menu button for more than five seconds to deactivate
the OSD adjustment lock function.
Though the OSD adjustment lock function is activated, you can still adjust
the brightness and contrast, and adjust MagicBright ( ) using the Direct
button.
MagicBright™
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu
Description
Push the MagicBright™ button to circle through available preconfigured
modes.
MagicBright™
- Seven different modes: Custom, Text, Internet, Game, Sport, Movie and
Dynamic Contrast.
Brightness
Menu
Description
Brightness
When OSD is not on the screen, push the button to adjust brightness.
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Function
Picture
Color
Image
OSD
Brightness
MagicColor
Coarse
Contrast
Color Tone
Fine
Color Control
Sharpness
V-Position
Gamma
H-Position
Transparency
V-Position
Language
H-Position
Display Time
LED
Brightness
Setup
Image Reset
Color Reset
Information
Picture : Not available in MagicBright™ mode of Dynamic Contrast.
Menu
Description
Play/Stop
You can use the on-screen menus to change the
brightness according to personal preference.
Brightness
MENU
,
MENU
→
→
→
→
You can use the on-screen menus to change the contrast
according to personal preference.
( Not available in MagicColor mode of Full and Intelligent. )
Contrast
MENU
,
,
MENU
→
→
→
→
→
Color : Not available in MagicBright™ mode of Dynamic Contrast.
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu
Description
Play/Stop
MagicColor is a new technology that Samsung has exclusively
developed to improve digital image and to display natural color
more clearly without disturbing image quality.
Off
Returns to the original mode.
Demo
The screen before applying MagicColor appears
on the right and the screen after applying
MagicColor appears on the left.
MagicColor
Full
Displays not only vivid natural color but also
more realistic natural skin color with clearness.
Intelligent Displays vivid natural color with clearness.
MENU
,
,
MENU
→
→
→
→
→
The tone of the color can be changed and one of four modes
can be selected -Cool, Normal, Warm and Custom.
Color Tone
( Not available in MagicColor mode of Full and Intelligent. )
MENU
,
,
,
MENU
→
→
→
→
→
→
Adjusts individual Red, Green, Blue color balance. -Red, Green,
Blue
( Not available in MagicColor mode of Full and Intelligent. )
Color Control
MENU
,
,
,
,
MENU
→
→
→
→
→
→
→
→
Gamma correction changes the luminance of the colors with
intermediate luminance.
- Mode 1
- Mode 2
- Mode 3
Gamma
MENU
,
,
,
MENU
→
→
→
→
→
→
Image
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu
Description
Play/Stop
Removes noise such as vertical stripes.
Coarse adjustment may move the screen image area. You
may relocate it to the center using the horizontal control
menu.
Coarse
(Available in analog mode only)
MENU
,
,
MENU
→
→
→
→
→
Removes noise such as horizontal stripes.
If the noise persists even after fine tuning, repeat it after
adjusting the frequency (clock speed).
Fine
(Available in analog mode only)
MENU
,
,
,
MENU
→
→
→
→
→
→
Changes the clearance of image.
( Not available in MagicColor mode of Full and
Intelligent. )
Sharpness
H-Position
MENU
,
,
,
MENU
→
→
→
→
→
→
Changes the horizontal position of the monitor's entire
display.
(Available in analog mode only)
MENU
,
,
,
MENU
→
→
→
→
→
→
Changes the vertical position of the monitor's entire
display.
(Available in analog mode only)
V-Position
MENU
,
,
,
MENU
→
→
→
→
→
→
OSD
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu
Description
Play/Stop
You can choose one of nine languages.
The language chosen affects only the language of the OSD. It
has no effect on any software running on the computer.
Language
MENU
,
,
MENU
→
→
→
→
→
You can change the horizontal position where the OSD menu
appears on your monitor.
H-Position
MENU
,
,
,
MENU
→
→
→
→
→
→
You can change the vertical position where the OSD menu
appears on your monitor.
V-Position
MENU
,
,
,
MENU
→
→
→
→
→
→
Change the transparency of the background of the OSD.
Transparency
MENU
,
,
,
MENU
→
→
→
→
→
→
The menu will be automatically turned off if no adjustments are
made for a certain time period.
You can set the amount of time the menu will wait before it is
turned off.
Display Time
- 5 sec, 10 sec, 20 sec, 200 sec
MENU
,
,
,
MENU
→
→
→
→
→
→
Setup
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu
Description
Play/Stop
Image parameters are replaced with the factory default
values.
Image Reset
MENU
,
,
,
MENU
→
→
→
→
→
→
Color parameters are replaced with the factory default
values.
Color Reset
LED Brightness
Information
MENU
,
,
,
MENU
→
→
→
→
→
→
Adjusts the brightness of the Power LED.
MENU
,
,
,
MENU
→
→
→
→
→
→
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu
Description
Shows a video source, display mode on the OSD screen.
Information
MENU
,
→
Download from Www.Somanuals.com. All Manuals Search And Download.
Model
Check List
Before calling for assistance, check the information in this section to see
if you can remedy any problems yourself. If you do need assistance,
please call the phone number on the Information section or contact your dealer.
Symptom
Check List
Solutions
No images on the
screen.
Is the power cord
connected
Check the power cord connection and supply.
I cannot turn on
the monitor.
properly?
Can you see
"Check Signal
Cable" on the
screen?
(Connected using the D-sub cable)
Check the signal cable connection.
If the power is on,
reboot the computer
to see the initial
screen(the login
screen), which can
be seen.
If the initial screen (the login screen) appears, boot the
computer in the applicable mode (the safe mode for
Windows ME/XP/2000) and then change the frequency of
the video card.
(Refer to the Preset Timing Modes)
If the initial screen (the login screen) does not appear,
contact the Service Center or your dealer.
Can you see "Not
Optimum Mode",
"Recommended
Mode 1680 x 1050
60 Hz" on the
You can see this message when the signal from the
video card exceeds the maximum resolution and
frequency that the monitor can handle properly.
Adjust the maximum resolution and frequency that the
monitor can handle properly.
screen?
If the display exceeds SXGA or 75 Hz, a "Not Optimum
Mode", "Recommended Mode 1680 x 1050 60 Hz"
message is displayed. If the display exceeds 85 Hz, the
display will work properly but the "Not Optimum Mode",
"Recommended Mode 1680 x 1050 60 Hz" message
appears for one minute and then disappears.
Please change to the recommended mode during this
one-minute period.
(The message is displayed again if the system is
rebooted.)
There is no image
on the screen.
The monitor is in PowerSaver mode.
Is the power
Press a key on the keyboard to activate the monitor and
restore the image on the screen.
indicator on the
monitor blinking at 1
second intervals?
If there is still no image, press the ' ' button.
Then press any key on the keyboard again to activate the
monitor and restore the image on the screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
I cannot see the
On Screen
Display.
Have you locked
the On Screen
Display (OSD)
Menu to prevent
changes?
Unlock the OSD by pressing the [MENU / ] button for at
least 5 seconds.
The screen shows
strange colors or
just black and
white.
Is the screen
Check the signal cable connection.
displaying only one
color as if looking at
the screen through
a cellophane
Make sure the video card is fully inserted in it's slot.
paper?
Have the screen
colors become
strange after
Reboot the computer.
running a program
or due to a crash
between
applications?
Has the video card
been set properly?
Set the video card by referring to the video card manual.
Adjust screen image position and size using the OSD.
The screen
suddenly has
become
Have you changed
the video card or
the driver?
unbalanced.
Have you adjusted
the resolution or
frequency to the
monitor?
Adjust the resolution and frequency at the video card.
(Refer to the Preset Timing Modes).
The screen can be unbalanced due to the cycle of the video card signals.
Readjust Position by referring to the OSD.
The screen is out
of focus or OSD
cannot be
Have you adjusted
the resolution or
frequency on the
monitor?
Adjust the resolution and frequency of the video card.
(Refer to the Preset Timing Modes).
adjusted.
LED is blinking but
no images on the
screen.
Is the frequency
properly adjusted
when checking the
Display Timing on
the menu?
Adjust the frequency properly by referring to the video
card manual and the Preset Timing Modes.
(The maximum frequency per resolution may differ from
product to product.)
There are only 16
colors shown on
the screen. The
screen colors have
changed after
changing the video
card.
Have the Windows
colors been set
properly?
Windows XP :
Set the resolution in the Control Panel
→
→
Appearance
→
→
and Themes
Display
Settings.
Windows ME/2000 :
Set the resolution in the Control Panel
Settings.
→
Display
Has the video card
been set properly?
Set the video card by referring to the video card manual.
There is a
message that
reads
Have you installed
the monitor driver?
Install the monitor driver according to the Driver
Installation Instructions.
"Unrecognized
monitor, Plug &
Play (VESA DDC)
monitor found".
See the video card
manual to see if the
Plug & Play (VESA
DDC) function can
be supported.
Install the monitor driver according to the Driver
Installation Instructions.
Check when
MagicTune™ does
not function
MagicTune™
* To check whether your PC is available for MagicTune™
feature, follow the steps below (When Windows is XP);
feature is found only
on PC (VGA) with
Window OS that
supports Plug and
Play.
→ →
Performance and Maintenance
properly.
Control Panel
→
→
→
→
System
Hardware
Device Manager
Monitors
After deleting Plug and Play monitor, find 'Plug and Play
Download from Www.Somanuals.com. All Manuals Search And Download.
monitor' by searching new Hardware.
MagicTune™ is an additional software for the monitor.
Some graphic cards may not support your monitor. When
you have a problem with the graphic card, visit our
website to check the compatible graphic card list
provided.
MagicTune™
doesn't work
properly.
Have you changed
your PC or video
graphic card?
Download the latest program. The program can be
downloaded http://www.samsung.com/monitor/magictune
Did you install the
program?
Reboot the computer after installing the program for the
first time. If a copy of the program is already installed,
remove it, reboot the computer, and then install the
program again. You need to reboot the computer for it to
operate normally after installing or removing the program.
Visit the MagicTune™ website and download the installation software for MagicTune™ MAC.
Check the following items if there is trouble with the monitor.
Check if the power cord and the video cables are properly connected to the computer.
Check if the computer beeps more than 3 times when booting.
(If it does, ask the service center to check the main board of the computer.)
If you installed a new video card or if you assembled the PC, check if the installed the adapter(video)
driver and the monitor driver.
Check if the scanning ratio of the video screen is set to between 56 Hz ~ 75 Hz.
(Do not exceed 75 Hz when using the maximum resolution.)
If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode, remove
→
→
the Display Adapter at the "Control Panel
System
Device Administrator" and then reboot the
computer to reinstall the adapter (video) driver.
If problems repeatedly occur, contact an authorized service center.
Q & A
Question
Answer
How can I change the frequency?
The frequency can be changed by reconfiguring the
video card.
Note that video card support can vary, depending on
the version of the driver used.
(Refer to the computer or the video card manual for
details.)
How can I adjust the resolution?
Windows XP :
Set the resolution in the Control Panel
→
→
→
Appearance and Themes
Display
Settings.
Windows ME/2000 :
Set the resolution in the Control Panel
Settings.
→
→
Display
Contact the video card manufacturer for details.
How can I set the Power Saving function?
Windows XP :
Set the resolution in the Control Panel
→
→
→
Appearance and Themes
Display
Screen
Saver.
Set the function in the BIOS-SETUP of the computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows ME/2000 :
Set the resolution in the Control Panel
→
→
Display
Screen Saver.
Set the function in the BIOS-SETUP of the computer.
Refer to the Windows / Computer Manual
How can I clean the outer case/LCD Panel?
Disconnect the power cord and then clean the
monitor with a soft cloth, using either a cleaning
solution or plain water.
Do not leave any detergent or scratches on the case.
Do not let any water enter the monitor.
Self-Test
Self-Test Feature Check | Warning Messages | Environment | Useful Tips
Your monitor provides a self test feature that allows you to check whether your monitor is functioning
properly.
Self-Test Feature Check
Turn off both your computer and the monitor.
Unplug the video cable from the back of the computer.
Turn on the monitor.
If the monitor is functioning properly, you will see a box in the illustration below.
This box appears during normal operation if the video cable becomes disconnected or damaged.
Turn off your monitor and reconnect the video cable; then turn on both your computer and the
monitor.
If your monitor screen remains blank after using the previous procedure, check your video controller
and computer system; your monitor is functioning properly.
Warning Messages
If there is something wrong with the input signal, a message appears on the screen or the screen
goes blank although the power indicator LED is still on. The message may indicate that the monitor is
out of scan range or that you need to check the signal cable.
Environment
Download from Www.Somanuals.com. All Manuals Search And Download.
The location and the position of the monitor may influence the quality and other features of the
monitor.
If there are any sub woofer speakers near the monitor, unplug and relocate the woofer to another
room.
Remove all electronic devices such as radios, fans, clocks and telephones that are within 3 feet
(one meter) of the monitor.
Useful Tips
A monitor recreates visual signals received from the computer. Therefore, if there is a problem with
the computer or the video card, this can cause the monitor to become blank, have poor coloring,
become noisy, and video mode not supported, etc. In this case, first check the source of the problem,
and then contact the Service Center or your dealer.
Judging the monitor's working condition
If there is no image on the screen or a "Not Optimum Mode", "Recommended Mode 1680 x 1050 60
Hz" message comes up, disconnect the cable from the computer while the monitor is still powered on.
If there is a message coming up on the screen or if the screen goes white, this means the monitor
is in working condition.
In this case, check the computer for trouble.
Download from Www.Somanuals.com. All Manuals Search And Download.
Model
Specifications
General
Model Name
LCD Panel
SyncMaster 2032NW
Size
20 " Wide Diagonal (51 cm)
433.44 mm (H) x 270.9 mm (V)
0.258 mm (H) x 0.258 mm (V)
Display area
Pixel Pitch
Synchronization
Horizontal
Vertical
30 ~ 81 kHz
56 ~ 75 Hz
Display Color
16,7 M
Resolution
Optimum resolution
Maximum resolution
1680 x 1050@60 Hz
1680 x 1050@60 Hz
Input Signal, Terminated
RGB Analog,
≥
≤
0.7 Vp-p ± 5 %, TTL level (V high 2.0 V, V low 0.8 V)
Maximum Pixel Clock
146 MHz (Analog)
Power Supply
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz
Signal Cable
Download from Www.Somanuals.com. All Manuals Search And Download.
15pin to 15pin D-sub cable, Detachable
Dimensions (W x H x D) / Weight
476 X 344 X 70 mm / 18.7 X 13.5 X 2.8 inch (Without stand)
476 X 390 X 199 mm / 18.7 X 15.4 X 7.8 inch / 4.75 kg / 10.5 lbs(With stand)
Environmental considerations
Operating
Storage
Temperature : 50°F ~ 104°F (10°C ~ 40°C)
Humidity : 10 % ~ 80 %, non-condensing
Temperature : -4°F ~113°F (-20°C ~ 45°C)
Humidity : 5 % ~ 95 %, non-condensing
Plug and Play Capability
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and
the computer systems will provide the best operating conditions and monitor settings. In most cases, the
monitor installation will proceed automatically, unless the user wishes to select alternate settings.
Dot Acceptable
TFT LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm
(one millionth) above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color
appear to be bright sometimes or some black pixels may be seen. This is not from bad quality and you
can use it without any problelms.
For example, the number of TFT LCD sub pixels contained in this product are 5,292,000.
Design and specifications are subject to change without prior notice.
Class B Equipment (Information Communication equipment for residential use)
This product complies with the Electromagnetic Compatibility Directives for residential use and can be
used in all areas including common residential areas.
(Class B equipment emits less electromagnetic waves than Class A equipment.)
PowerSaver
This monitor has a built-in power management system called PowerSaver. This system saves energy
by switching your monitor to low-power mode when it has not been used for a certain amount of time.
The monitor automatically returns to normal operation when you press a key on the keyboard. For
energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for
long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in
your computer. Use the software utility installed on your computer to set up this feature.
Power off
EPA/ENERGY 2000
State
Normal Operation
Power saving mode
Power Indicator
Blue
Blue, Blinking
Less than 1 W
Off
Power Consumption
Less than 50 W
Less than 1 W
®
This monitor is EPA ENERGY STAR compliant and ENERGY2000
compliant when used with a computer equipped with VESA DPM
functionality.
®
As an ENERGY STAR Partner, SAMSUNG has determined that this
®
product meets the ENERGY STAR guidelines for energy efficiency.
Download from Www.Somanuals.com. All Manuals Search And Download.
Preset Timing Modes
If the signal transferred from the computer is the same as the following Preset Timing Modes, the
screen will be adjusted automatically. However, if the signal differs, the screen may go blank while
the power LED is on. Refer to the video card manual and adjust the screen as follows.
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Sync
Polarity
(H/V)
Pixel Clock
(MHz)
Display Mode
MAC, 640 x 480
MAC, 832 x 624
MAC,1152 x 870
IBM, 640 x 350
35.000
49.726
68.681
31.469
31.469
31.469
37.500
37.861
35.156
37.879
48.077
46.875
48.363
56.476
60.023
67.500
60.000
79.976
64.674
66.667
74.551
75.062
70.086
59.940
70.087
75.000
72.809
56.250
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.000
75.025
59.883
30.240
57.284
100.000
25.175
25.175
28.322
31.500
31.500
36.000
40.000
50.000
49.500
65.000
75.000
78.750
108.000
108.000
135.000
119.000
-/-
-/-
-/-
+/-
-/-
IBM, 640 x 480
IBM, 720 x 400
-/+
-/-
VESA, 640 x 480
VESA, 640 x 480
VESA, 800 x 600
VESA, 800 x 600
VESA, 800 x 600
VESA, 800 x 600
VESA, 1024 x 768
VESA, 1024 x 768
VESA, 1024 x 768
VESA, 1152 x 864
VESA 1280 x 960
VESA, 1280 x 1024
VESA,1680 x 1050
-/-
+/+
+/+
+/+
+/+
-/-
-/-
+/+
+/+
+/+
+/+
+/-
Horizontal Frequency
The time to scan one line connecting the right edge to the left edge of the
screen horizontally is called the Horizontal Cycle and the inverse number
of the Horizontal Cycle is called the Horizontal Frequency.Unit : kHz
Vertical Frequency
Like a fluorescent lamp, the screen has to repeat the same image many
times per second to display an image to the user. The frequency of this
repetition is called the Vertical Frequency or Refresh Rate. Unit : Hz
Download from Www.Somanuals.com. All Manuals Search And Download.
repetition is called the Vertical Frequency or Refresh Rate. Unit : Hz
Download from Www.Somanuals.com. All Manuals Search And Download.
Model
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the
SAMSUNG customer care center.
North America
U.S.A
1-800-SAMSUNG (7267864)
1-800-SAMSUNG (7267864)
01-800-SAMSUNG (7267864)
CANADA
MEXICO
Latin America
ARGENTINE
BRAZIL
0800-333-3733
4004-0000
CHILE
800-726-7864 (SAMSUNG)
01-8000112112
0-800-507-7267
1-800-10-7267
800-6225
COLOMBIA
COSTA RICA
ECUADOR
EL SALVADOR
GUATEMALA
JAMAICA
1-800-299-0013
1-800-234-7267
800-7267
PANAMA
PUERTO RICO
REP. DOMINICA
1-800-682-3180
1-800-751-2676
TRINIDAD &
TOBAGO
1-800-7267-864
0-800-100-5303
VENEZUELA
Europe
Download from Www.Somanuals.com. All Manuals Search And Download.
BELGIUM
02 201 2418
844 000 844
CZECH REPUBLIC
DENMARK
FINLAND
70 70 19 70
030-6227 515
3260 SAMSUNG(7267864) (€
0,15/min)
FRANCE
GERMANY
HUNGARY
ITALIA
01805 - 121213 (€ 0,14/Min)
06-80-SAMSUNG (7267864)
800 SAMSUNG (7267864)
0032 (0)2 201 24 18
0900 20 200 88 (€ 0,10/Min)
815-56 480
LUXEMBURG
NETHERLANDS
NORWAY
POLAND
0 801 801 881
PORTUGAL
80 8 200 128
REPUBLIC OF
IRELAND
0818 717 100
SLOVAKIA
SPAIN
0800-SAMSUNG (7267864)
902 10 11 30
SWEDEN
SWITZERLAND
U.K
0771-400 200
0800-7267864
0870 SAMSUNG (7267864)
CIS
ESTONIA
800-7267
LATVIA
800-7267
LITHUANIA
KAZAKHSTAN
RUSSIA
8-800-77777
8 800 080 1188
8-800-200-0400
8-800-502-0000
140-1234
UKRAINE
UZBEKISTAN
Asia Pacific
AUSTRALIA
CHINA
1300 362 603
800-810-5858, 010- 6475 1880
3698-4698
HONG KONG
Download from Www.Somanuals.com. All Manuals Search And Download.
INDIA
3030 8282, 1800 1100 11
0800-112-8888
INDONESIA
JAPAN
0120-327-527
MALAYSIA
PHILIPPINES
SINGAPORE
THAILAND
TAIWAN
1800-88-9999
1800-10-SAMSUNG (7267864)
1800-SAMSUNG (7267864)
1800-29-3232, 02-689-3232
0800-329-999
VIETNAM
1 800 588 889
Middle East & Africa
SOUTH AFRICA
0860 7267864 (SAMSUNG)
800SAMSUNG (7267864)
8000-4726
U.A.E
Terms
Dot Pitch
The image on a monitor is composed of red, green and blue dots. The closer the dots, the higher the
resolution. The distance between two dots of the same color is called the 'Dot Pitch'. Unit : mm
Vertical Frequency
The screen must be redrawn several times per second in order to create and display an image for the
user. The frequency of this repetition per second is called the Vertical Frequency or Refresh Rate.
Unit : Hz
Example : If the same light repeats itself 60 times per second, this is regarded as 60 Hz.
Horizontal Frequency
The time to scan one line connecting the right edge to the left edge of the screen horizontally is called
the Horizontal Cycle. The inverse number of the Horizontal Cycle is called Horizontal Frequency.
Unit : kHz
Interlace and Non-Interlace Methods
Showing the horizontal lines of the screen from the top to the bottom sequentially is called the Non-
Interlace method while showing odd lines and then even lines in turn is called the Interlace method.
The Non-Interlace method is used for the majority of monitors to ensure a clear image. The Interlace
method is the same as that used in TVs.
Plug & Play
This is a function that provides the best quality screen for the user by allowing the computer and the
monitor to exchange information automatically. This monitor follows the international standard VESA
DDC for the Plug & Play function.
Resolution
Download from Www.Somanuals.com. All Manuals Search And Download.
The number of horizontal and vertical dots used to compose the screen image is called the
'resolution'. This number shows the accuracy of the display. A high resolution is good for performing
multiple tasks as more image information can be shown on the screen.
Example :If the resolution is 1680 x 1050 , this means the screen is composed of 1680
horizontal dots (horizontal resolution) and 1050 vertical lines (vertical resolution).
For Better Display
Adjust computer resolution and screen injection rate (refresh rate) oncomputer as described below to
enjoy the best quality of picture. You can have an uneven quality of picture in the screen if the best
quality of picture is not provided in TFT-LCD.
Resolution : 1680 x 1050
Vertical frequency (refresh rate) : 60 Hz
TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm
(one millionth) above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color
seem to be bright sometimes or some of black pixels could be seen.
This is not from bad quality and you can use it without uneasiness.
For example, the number of TFT LCD sub pixels that is contained in this product are 5,292,000.
When cleaning the monitor and the panel outside, please apply the recommended small amount of
cleaner by using a soft cloth to polish. Do not force the LCD area but rub softly.
If excessive force is applied, you can have a stain on it.
If you are not satisfied with the picture quality, you can get better quality of picture by performing the
"auto adjustment function" in display screen that is appeared as window termination button is
pressed.
If there's still noise after the automatic adjustment, use the FINE/COARSE adjustment function.
When viewing a fixed screen for an extended period of time, a residual image or blurriness may
appear.
Change the mode to energy save or set a screensaver to move the picture when you need to be
away from the monitor for an extended period of time.
Authority
Information in this document is subject to change without notice.
© 2007 Samsung Electronics Co., Ltd. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co.,
Ltd. is strictly forbidden.
Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or
consequential damages in connection with the furnishing, performance, or use of this material.
Samsung
Microsoft Windows
and
is the registered trademark of Samsung Electronics Co., Ltd.;
Windows NT VESA DPM
,
DDC
are registered trademarks of Microsoft Corporation;
registered trademarks of Video Electronics Standard Association; the
,
and
are
name and
ENERGY STAR®
logo are registered trademarks of the U.S. Environmental Protection Agency (EPA). As an ENERGY
STAR® Partner, Samsung Electronics Co., Ltd. has determined that this product meets the ENERGY
STAR® guidelines for energy efficiency. All other product names mentioned herein may be the
trademarks or registered trademarks of their respective owners.
Download from Www.Somanuals.com. All Manuals Search And Download.
|