* Some of the contents in this manual may differ from your
phone, depending on the software installed or your service
provider.
ELECTRONICS
Printed in Korea
Code No.: GH68-05454A
English. 09/2004. Rev. 1.1
World Wide Web
http://www.samsungmobile.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Important safety precautions........................... 7
Unpacking ........................................................ 9
Your phone..................................................... 10
Display................................................................... 13
Installing the SIM card ............................................. 17
Selecting functions and options.................................. 22
Call functions ................................................. 25
Making a call........................................................... 25
Adjusting the volume ............................................... 27
Answering a call ...................................................... 28
Viewing missed calls ................................................ 28
Options during a call ...................................... 31
Putting a call on hold................................................ 31
Using the menu functions ......................................... 32
Switching the microphone off (Mute).......................... 32
Muting/Sending key tones......................................... 33
Sending DTMF tones ................................................ 34
Searching for a number in Phonebook ........................ 34
Answering a second call............................................ 35
Making a multi-party call .......................................... 36
Entering text .................................................. 38
Changing the text input mode ................................... 39
Using T9 mode........................................................ 40
Using alphabet mode................................................ 42
Using number mode................................................. 43
Using symbol mode.................................................. 44
Using the menus ............................................ 45
Accessing a menu function by scrolling ....................... 45
Accessing a menu function by using its shortcut........... 46
List of menu functions.............................................. 47
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Phonebook ..................................................... 52
Storing a number with a name .................................. 52
Searching for a number in Phonebook ........................ 57
Editing a caller group ............................................... 59
Speed-dialling ......................................................... 60
Deleting all Phonebook entries................................... 61
Checking memory status .......................................... 62
Using service dialling numbers................................... 63
Text messages ............................................... 64
Memory status (Menu 1.7)......................................... 72
Inbox (Menu 2.1) ..................................................... 75
Outbox (Menu 2.2) ................................................... 78
Draft (Menu 2.3) ...................................................... 79
Write new (Menu 2.4) ............................................... 79
Templates (Menu 2.5) ............................................... 83
Delete all (Menu 2.6) ................................................ 84
Memory status (Menu 2.7)......................................... 84
Setup (Menu 2.8) ..................................................... 85
MMS profile (Menu 2.9) ............................................. 86
Call records .................................................... 87
Missed calls (Menu 3.1) ............................................. 87
Received calls (Menu 3.2).......................................... 88
Dialled calls (Menu 3.3)............................................. 88
Delete all (Menu 3.4) ................................................ 89
Call time (Menu 3.5) ................................................. 89
Call cost (Menu 3.6).................................................. 90
Sound settings ............................................... 91
Ring tone (Menu 4.1) ................................................ 91
Ring volume (Menu 4.2) ............................................ 91
Alert type (Menu 4.3)................................................ 92
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Alert on call (Menu 4.6)............................................. 94
Phone settings ............................................... 96
Language (Menu 5.4)................................................ 99
Organiser ..................................................... 105
Calendar (Menu 6.2) ............................................... 106
Calculator (Menu 6.4).............................................. 110
To do list (Menu 6.5)............................................... 110
Voice memo (Menu 6.6) .......................................... 113
Currency exchange (Menu 6.7)................................. 115
Network services.......................................... 116
Call diverting (Menu 7.1) ......................................... 116
Call barring (Menu 7.2) ........................................... 118
Call waiting (Menu 7.3) ........................................... 120
Network selection (Menu 7.4)................................... 121
Caller ID (Menu 7.5) ............................................... 122
Closed user group (CUG) (Menu 7.6)......................... 122
Funbox ......................................................... 125
WAP browser (Menu 8.1) ......................................... 125
Games (Menu 8.2).................................................. 132
Sounds (Menu 8.3) ................................................. 134
Images (Menu 8.4) ................................................. 134
Delete all (Menu 8.5) .............................................. 135
Memory status (Menu 8.6)....................................... 135
SIM AT ......................................................... 136
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Solving problems.......................................... 137
Access codes ................................................ 140
Phone password .................................................... 140
PIN...................................................................... 141
PUK ..................................................................... 141
PIN2 .................................................................... 142
PUK2 ................................................................... 142
Barring password................................................... 143
Health and safety information...................... 144
SAR certification information ................................... 144
Precautions when using batteries............................. 145
Road safety .......................................................... 147
Operating environment........................................... 147
Electronic devices .................................................. 148
Potentially explosive environments........................... 150
Emergency calls .................................................... 151
Other important safety information .......................... 152
Care and maintenance............................................ 153
Glossary ....................................................... 155
Index ........................................................... 160
Quick reference card .................................... 165
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Important safety
precautions
Read these guidelines before using your wireless
phone. Failure to comply with them may be
dangerous or illegal.
Road safety at all times
Do not use a hand-held phone while driving; park
the vehicle first.
Switching off when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switching off in aircraft
Wireless phones can cause interference. Using them
in aircraft is both illegal and dangerous.
Switching off near all medical equipment
Switch off your phone near the medical equipment.
Hospitals or health care facilities may be using
equipment that could be sensitive to external RF
energy. Follow any regulations or rules in force.
Interference
All wireless phones may be subject to interference,
which could affect their performance.
Special regulations
Meet any special regulations in force in any area and
always switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger (in a hospital for example).
Water resistance
Your phone is not water-resistant. Keep it dry.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Important safety precautions
Sensible use
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on, especially when the phone
is in service.
Emergency call
Key in the emergency number for your present
location, then press the
key. Give all the
necessary information as accurately as possible. Do
not cut off the call until given permission to do so.
Keeping small children away from your phone
Keep the phone and all its parts including
accessories out of the reach of small children.
Accessories and batteries
Use only Samsung-approved accessories. Use of any
unauthorised accessories could damage your phone
and may be dangerous.
Use only Samsung-approved batteries and recharge
your battery only with Samsung-approved chargers.
Qualified service
Only qualified service personnel may install or repair
your phone.
For more detailed safety information, see “Health
and safety information” on page 144.
CAUTION
RISK OF EXPLOSION IF A BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE USED BATTERIES ACCORDING
TO THE INSTRUCTIONS.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Unpacking
Your package contains the following items:
Travel Adapter
Phone
Battery
Owner’s Manual
Note: The items supplied with your phone may be
different depending on the country.
In addition, you can obtain the following
accessories for your phone from your local
Samsung dealer:
• Headset
• Simple hands-free kit
• Cigarette lighter adapter
• Finger strap
• Data kit
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Your phone
Phone layout
The following illustrations show the main elements
of your phone:
Earpiece
Ear-
microphone
jack
Main display
Volume/Menu
browse keys
Navigation keys
(Up/Down/Left/
Right)
Soft key (left)
Soft key (right)
WAP Browser
key
Power On/Off /
Menu exit key
Dial/Menu
confirmation
key
Alphanumeric
keys
Cancel/Back/
Correction key
Microphone
Special
function keys
Charger Connector
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Your phone
Key(s)
Description
Perform the functions indicated by the
text above them, on the bottom line of
the display.
(soft keys)
In menu mode, scrolls through the
menu options and Phonebook memory
with the Up and Down key; return to
the previous menu level with the Left
key and select the current menu with
the Right key.
In idle mode, allows you to access
your favourite menu options directly.
For further details about shortcuts, see
page 104.
In idle mode, launches the WAP
(Wireless Application Protocol)
browser.
Initiates or answers a call.
In idle mode, accesses the call log list.
In menu mode, selects a menu
function or stores information that you
have entered, such as a name in the
phone or SIM memory.
Deletes characters from the display.
In menu mode, returns to the previous
screen.
Ends a call.
When held down, switches the phone
on or off.
In menu mode, cancels your input and
returns to idle mode.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Your phone
Key(s)
Description (continued)
When held down in idle mode, quickly
accesses your voice mail server.
Enter numbers, letters and some
special characters.
Used for various purposes in different
functions.
When held down while entering a
phone number, the
pause.
key enters a
When held down in idle mode, the
key enters or exits the silent mode and
key enters the key lock mode.
(on the left side of the phone)
During a call, adjusts the earpiece
volume.
In idle mode, adjusts the keypad tone
volume.
In menu mode, scrolls through the
menu options and the Phonebook
memory.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Your phone
Display
Display layout
The main display has three areas:
Icons
Text and
graphic area
Soft keys
Indications
Menu
Name
Area
Description
First line
Displays various icons. See
page 14.
Middle
Displays messages, instructions
and any information that you
enter, such as a number to be
dialled.
Last line
Shows the functions currently
assigned to the two soft keys.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Your phone
Icons
Icon Description
Shows the received signal strength. The
more bars, the stronger the signal.
Appears when a call is in progress. When
your SIM card supports ALS (Alternate
Line Service), this icon may appear with
the number 1, 2, or both.
For example
,
, or
.
Appears when you are out of a service
area. When it displays, you cannot make
or receive calls.
Appears when you have new or
unchecked voice messages. When your
SIM card supports ALS (Alternate Line
Service), this icon may appear as
,
,
.
Appears when you have new or unread
messages.
Appears when you have new or
unchecked multimedia messages that
have been received.
Appears when you set an alarm to sound
at a specified time.
Appears when mute mode is active.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Your phone
Icon Description (continued)
Appears when the call diverting feature is
activated.When your SIM card supports
ALS (Alternate Line Service), this icon
may appear with the number 1, 2, or
both. For example
,
, or
.
Appears when you are out of your home
area and have logged onto a different
network; for example, when travelling in
other countries.
Appears when you are connected to a
GPRS-enabled network.
Appears when you are in your home zone.
(Only if your service provider supports this.)
Appears when you are in your office zone.
(Only if your service provider supports this.)
Appears when you set the alert type for
incoming calls to Vibration or
Vibra+melody. For further details, see
page 92.
Appears when the silent mode is active.
Shows the level of your battery. The more
bars you see, the more power you have
left.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Your phone
Backlight
A backlight illuminates the display and the keypad.
When you press any key, the backlight turns on and
remains on for a given period of time, depending on
the Backlight option settings. The display turns off
after one minute to conserve your battery power.
To specify the length of time the backlight is active,
set the Backlight option settings (Menu 5.1.5).
See page 97 for further details.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Installing the SIM card
When you subscribe to a cellular network, you are
provided with a plug-in SIM card loaded with your
subscription details, such as your PIN, any optional
services available, and so on.
Important! The plug-in SIM card and its contacts
can be easily damaged by scratches
or bending, so be careful when
handling, inserting, or removing the
card.
Keep all SIM cards out of the reach of
small children.
1. If necessary, switch off the phone by holding
down the
displays.
key until the power-off image
2. Remove the battery. To do so:
➀
Press and hold down the catch above the
battery on the back of the phone.
➁
Slide the battery away, as shown.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
3. Slide the SIM card into the SIM card socket, as
shown, so that it locks the card into position.
Make sure the gold contacts of the card face into
the phone.
Note: When you need to remove the SIM card,
slide it out, as shown, and remove it from
the socket.
4. Place the battery back on the phone. Make sure
each side tab of the battery is aligned with the
corresponding slot on the phone.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
5. Slide the battery up towards the catch until it
locks into place.
Charging the battery
Your phone is powered by a rechargeable Li-ion
battery. A travel adapter comes with your phone for
charging the battery. Use only approved batteries
and chargers. Ask your local Samsung dealer for
further details.
The travel adapter allows you to use the phone
while the battery is charging, but this causes the
phone to charge more slowly.
Note: You must fully charge the battery before using
your phone for the first time. A discharged
battery is fully recharged in approximately
200 minutes.
1. With the battery in position on the phone, plug
the travel adapter connector into the jack at the
bottom of the phone.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
2. Plug the adapter into a standard AC wall outlet.
While charging, the battery icon at the top right
corner of the display repeatedly fills to show that
the battery is charging.
3. When charging is finished, the battery icon
becomes solid and the “Fully charged” message
is displayed, unplug the adapter from the power
outlet and from the phone by pressing the gray
tabs on both sides of the connector and pulling
the connector out.
Note: You must unplug the adapter before removing
the battery from the phone during charging;
otherwise, the phone could be damaged.
Low battery indicator
When the battery is weak and only a few minutes of
talk time remain, the battery sensor informs you in
the following ways: an empty battery icon flashes
(
), you hear a warning tone, and a message
repeats at regular intervals on the display.
When the battery becomes too weak for the phone
to operate, it switches off automatically.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Switching the phone on or off
To switch the phone on:
1. Hold down the
on.
key until the phone switches
2. If the phone asks you to enter the phone
password, enter the password and press the OK
soft key. The phone password is preset to
“00000000” at the factory. For further details,
see page 140.
The phone searches for your network and the
current date and time appear on the display.
Once connected to a network, you can make and
receive calls.
Service Provider
07:30
Wed 06 Mar
Menu
Name
Note: To change the language, use the
Language menu option (Menu 5.4).
For further details, see page 99.
To switch the phone off:
Hold down the
displays.
key until the power-off image
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Selecting functions and options
Your phone offers a set of functions that allows you
to customise your phone. These functions are
arranged in menus and sub-menus, accessed via
the two soft keys marked
and
. Each menu
and sub-menu allows you to view and alter the
settings of a particular function.
The roles of the soft keys vary according to the
function you are currently using; the label on the
bottom line of the display, just above the soft keys,
indicates its current role.
Example:
Service Provider
07:30
Wed 06 Mar
Menu
Name
Press the right soft
key to access the
Phonebook feature.
Press the left soft
key to access
menu functions.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
To view various functions/options available, or
select the one you want:
1. Press the appropriate soft key.
2. To
select the:
Press the
Select soft key or
Right key.
• function displayed
• option highlighted
view the next function or Down key or
key
highlight the next option on the left side of
on a list
the phone.
Up key or
the left side of the
phone.
move back to the
previous function or
option on a list
key on
move back up one level Left key,
soft key,
in the structure
or
C
key.
return to idle mode
key.
In some functions, you may be asked for a
password or PIN. Enter the required code and press
the OK soft key.
Note: When you access a list of options, your phone
highlights the current option. If, however, there
are only two options, such as On/Off or
Enable/Disable, your phone highlights the
option that is not currently active so that you
can select it directly.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Locking or unlocking the keypad
You can lock the keypad to avoid pressing keys by
mistake.
To lock the keypad manually, press and hold the
key in idle mode until the “Key pad locked”
message displays.
To lock the keypad automatically, use the Auto key
lock option (Menu 5.1.3). See page 97.
In the key lock mode, you can dial emergency calls
and answer incoming call using the keypad.
When you end the call, your phone returns to the
key lock mode after a given period time.
To exit key lock mode, press the Unlock soft key
and then press the
key.
The “Keypad active” message displays.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Call functions
Making a call
When the idle screen displays, enter the area code
and phone number, and press the key.
Note: When you check the Auto redial option in the
Extra settings menu (Menu 5.6), the phone
automatically redials up to ten times when the
person does not answer the call or is already
on the phone. See page 103 for further details.
Making an international call
1. Press and hold the
0
key.
The character appears.
+
2. Enter the country code, area code and phone
number and press the
key.
Correcting the number
To clear
Press the
C key.
the last digit
displayed
any other digit in Navigation keys until the cursor
the number
is immediately to the right of
the digit to be cleared. Press
the
C
key. You can also insert a
missing digit simply by
pressing the appropriate key.
all digits displayed
C
key and hold it for more than
one second.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Call functions
Ending a call
When you want to finish your call, briefly press the
key.
Redialling the last number
The phone stores numbers you have dialed,
received, or missed, if the caller is identified. See
“Call records” on page 87 for further details.
To recall any of these numbers:
1. If you have typed characters on the display,
press the
key to return to idle mode.
2. Press the
key to display a list of the last
numbers, in the order in which the calls were
made.
3. Use the Up and Down keys or volume keys on
the left side of the phone to scroll through the
numbers until the number you want highlights.
4. T
o
Press the
dial the number
edit the number
key.
Options soft key and
select Edit. Change the
number as required,
referring to page 25.
delete the number
Options soft key and
select Delete
.
delete all of the
numbers on the
Redial list
Options soft key and
select Delete all. Mark
the All calls box and
press the Delete soft
key. When a confirming
message displays, press
the Yes soft key.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Call functions
Making a call from Phonebook
You can store the phone numbers that you use
regularly in the SIM card or the phone’s memory,
which are collectively called Phonebook. Simply
select a name to recall the associated number. For
further details about Phonebook features, see
page 52.
Adjusting the volume
During a call, if you want to adjust the earpiece
volume, use the volume keys on the left side of the
phone.
Press the key to increase the volume level and the
key to decrease the level.
In idle mode, you can also adjust the keypad tone
volume using these keys.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Call functions
Answering a call
When somebody calls you, the phone rings and shows
the incoming call image.
When the caller can be identified, the caller’s phone
number, or name if stored in Phonebook, displays.
1. Press the
key or the Accept soft key to answer
the incoming call.
When the Anykey answer option in the Extra
settings menu (Menu 5.6) is checked, you can
press any key to answer a call, except for the
key and the Reject soft key. See page 103.
Note: To reject an incoming call, press the
key
or the Reject soft key.
2. End the call by pressing the
key.
Note: You can answer a call while using Phonebook or
menu features. After ending the call, the display
returns to the function screen you were using.
Viewing missed calls
When you are unable to answer a call for any reason,
you can find out who was calling you, if this service is
available, so that you can call the person back.
The number of missed calls displays on the idle screen
immediately after a call has been missed.
To view the missed call immediately:
1. Press the View soft key.
The number for the most recent missed call
displays, if available.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Call functions
2. To
scroll through the
Press the
Up or Down key.
missed calls
call the number
displayed
key.
edit or delete a missed Select soft key. See
call number below.
Editing a missed call number
Note: When the number for the missed call is not
available, the Edit option does not display.
1. Press the Options soft key.
2. Press the Up or Down key to highlight the Edit
option.
3. Press the Select soft key.
4. Change the number, as required.
5. To
call the number
store the number
Press the
key.
Save soft key and enter
the name and location
required. For further
details, see page 52.
Deleting a missed call
1. Press the Options soft key.
2. If necessary, press the Up or Down key to
highlight the Delete option.
3. Press the Select soft key.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Call functions
You can press the
key at any time to exit the
Missed Call feature.
Note: You can access the Missed Call feature at any
time by selecting the Missed calls menu
(Menu 3.1). For further details, see page 87.
Quickly switching to silent mode
Silent mode is useful when you wish to stop the
phone from making noise, in a theatre for example.
In idle mode, press and hold the
key until the
“Silent mode” message and the silent icon (
display.
)
In silent mode, your phone changes the sound
settings as follows:
Option
New setting
Alert type (Menu 4.3
)
Vibration
Off
Keypad tone (Menu 4.4
Message tone (Menu 4.5
Power off tone (Menu 4.7
Extra tones (Menu 4.8
)
)
Off
)
Off
)
Off
To exit and reactivate the previous sound settings,
press and hold the key again until the “Exit silent
mode” message displays. The silent icon (
longer displays.
) no
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Options during a call
Your phone provides a number of control functions
that you can use during a call.
Putting a call on hold
You can place a call on hold whenever you want.
You can make another call while you have a call in
progress if your network supports this service.
When you have an active call and a call on hold, you
may switch between the two calls, changing the one
on hold to active and placing the other on hold.
To place a call on hold, simply press the Hold soft
key. You can reactivate the call whenever you want,
by pressing the Unhold soft key.
To make a call while you have a call in progress:
1. Enter the phone number that you wish to dial or
look it up in Phonebook.
For details about searching for a number in
Phonebook, see page 34.
2. Press the
key to dial the second call.
The first call is automatically put on hold.
Or,
1. Put the current call on hold by pressing the Hold
soft key.
2. Make the second call in the normal way.
To switch between the two calls, simply press the
Swap soft key.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Options during a call
The current call is placed on hold and the call on
hold is reactivated so that you can continue
conversing with the other person.
When you want to finish, end each call normally by
pressing the
key.
Using the menu functions
During a call, you can access the main menu
functions.
1. Press the Options soft key.
2. Press the OK soft key when the Menu option
highlights.
3. Press the Up or Down key to scroll through the
menu list.
Note: You cannot use some menus during a call.
They are deactivated on this list.
4. When the menu you want highlights, press the
Select soft key.
5. If the selected menu has sub-options, repeat
Steps 4 and 5.
For further details about the menu functions
available, see the list on page 47.
Switching the microphone off (Mute)
You can temporarily switch your phone’s
microphone off so that the person with whom you
are speaking cannot hear you.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Options during a call
Example: You wish to say something to another
person in the room, but do not want the
person on the phone to hear you.
To switch the microphone off temporarily:
1. Press the Options soft key.
2. Press the Down key to highlight the Mute
option.
3. Press the OK soft key.
The other person can no longer hear you.
To switch the microphone back on:
1. Press the Options soft key.
2. If necessary, press the Down key to highlight the
Unmute option.
3. Press the OK soft key.
The other person can hear you again.
Muting/Sending key tones
These options allow you to turn the key tones off or
on. If the Mute keys option is selected, your phone
does not transmit key tones, which allows you to
press keys without hearing annoying key tones
during a call.
Note: To communicate with answering machines or
computerised telephone systems, the Send
keys option must be selected.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Options during a call
Sending DTMF tones
You can send the DTMF (Dual Tone Multi-Frequency)
tones of the number on the display during a call.
This option is helpful for entering a password or
account number when you call an automated
system, like a banking service.
To send the DTMF tones:
1. When you are connected to the teleservice
system, press the Options soft key.
2. Press the Down key to highlight the Send DTMF
option.
3. Press the OK soft key.
4. Enter the number you want to send and press
the OK soft key.
The tones of the displayed number are sent.
Searching for a number in
Phonebook
You can search for a number in Phonebook during a
call.
1. Press the Options soft key.
2. Press the Down key to highlight the Phonebook
option.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Options during a call
3. Press the OK soft key.
The Phonebook entries are listed.
4. Enter the name that you wish to find.
If you enter the first few letters of the name, the
Phonebook entries will be listed, starting with
the first entry matching your input.
5. To view the highlighted entry, press the View
soft key.
For further details about the Phonebook feature,
see page 52.
Answering a second call
You can answer an incoming call while you have a
call in progress, if your network supports this
service and you have set the Call waiting menu
(Menu 7.3) to Activate; see page 120. You are
notified of an incoming call by a call waiting tone.
To answer a call while you have a call in progress:
1. Press the
key to answer the incoming call.
The first call is automatically put on hold.
2. To switch between the two calls, press the Swap
soft key.
3. To end the call on hold, press the Options soft
key and select the End held call option.
To end the current call, press the
key.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Options during a call
Making a multi-party call
Multi-party calling is a feature of some networks
that allows up to six people to take part
simultaneously in a multi-party or conference call.
For more information, contact your service provider.
Setting up a multi-party call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way.
The first call is automatically put on hold.
3. To connect the first participant to you and the
second participant in a multi-party call, press
the Options soft key and select the Join option.
Press the OK soft key.
4. To add a new person to the multi-party call, call
the person in the normal way and press the
Options soft key. Select the Join option and
press the OK soft key.
You can add incoming callers by answering the call,
pressing the Options soft key, and selecting the
Join option. Repeat as required.
Having a private conversation with one
participant
1. Press the Options soft key and choose the
Select one option. Press the OK soft key.
The list of call participants appears.
2. Highlight a person from the list by pressing the
Up or Down key, and press the Select soft key
or the
key.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Options during a call
3. When the Private option highlights, press the
OK soft key.
Now you can talk privately with that person. The
other participants can still converse with each
other.
4. To return to the multi-party call, press the
Options soft key and select the Join option.
Press the OK soft key.
All the multi-party call participants can now hear
each other.
Dropping one participant
1. Press the Options soft key and choose the
Select one option. Press the OK soft key.
The list of call participants appears.
2. Highlight a person from the list by pressing the
Up or Down key, and press the Select soft key
or the
key.
3. Press the Down key to select the Remove
option and press the OK soft key.
The call with that participant ends, but you can
continue to talk with the others.
4. End the multi-party call by pressing the
key.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering text
When using your phone, you will often need to
enter text, such as when storing a name in
Phonebook, creating a personal greeting, or
scheduling events on your calendar. You can enter
alphanumeric characters by using your phone’s
keypad.
Your phone has the following text input modes:
• T9 mode
This mode allows you to enter words with only
one keystroke per letter. Each key on the keypad
has more than one letter––for example, when
you press the
5
key, J, K, or L can be displayed.
The T9 mode automatically compares your
keystrokes with an internal linguistic dictionary to
determine the correct word, thus requiring far
fewer keystrokes than the traditional alphabet
mode.
• Alphabet mode
This mode allows you to enter letters by pressing
the key labelled with the letter you want to enter
once, twice, three, or four times until it displays.
• Number mode
This mode allows you to enter numbers.
• Symbol mode
This mode allows you to enter various symbols
and special characters.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering text
Changing the text input mode
When you are in a field that allows characters to be
entered, you will notice the text input mode
indicator on the display.
Example: Writing a text message
Write new
Text input
Options
mode indicator
To select the
Press the right soft key
until
T9 mode
displays.
See page 40.
Alphabet mode
Number mode
Symbol mode
displays.
See page 42.
displays.
See page 43.
the symbol list displays.
See page 44.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering text
Using T9 mode
The T9 predictive text input mode allows you to key
in any character using single keystrokes. This text
input mode is based on a built-in dictionary.
To enter a word in T9 mode:
1. When you are in T9 mode, start entering a word
by pressing keys
2
to
9. Press each key only
once for one letter.
Example: To enter “Hello” in the T9 mode, press
the and keys.
4,
3,
5,
5
6
The word that you are typing appears on the
display. It may change with each key that you
press.
2. Enter the whole word before editing or deleting
any keystrokes.
3. If the word is correct, start entering the next
word.
Otherwise, press the
0, Up, or Down key
repeatedly to display alternative word choices
for the keys that you have pressed.
Example: Both “Of” and “Me” use the
6
and
3
keys. The phone displays the most
commonly used choice first.
4. Put a space between words by pressing the
key.
To add a new word into the T9 dictionary:
1. After pressing the keys corresponding to the
word you want to add, press the
to display the alternative words.
0
or Down key
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering text
2. When you press the
0
or Down key at the last
alternative word, Add displays. Press the Add
soft key.
3. If necessary, clear the word using the
C
key and
enter the word you want to add using alphabet
mode; see page 42.
4. Press the OK soft key.
The word is added to the T9 dictionary and
becomes the first word for the associated
keypress.
Note: This feature may not be available for some
languages.
• To enter periods, hyphens, or apostrophes, press
the
1
key. The T9 mode applies grammar rules to
ensure that the correct punctuation is used.
Example: The key is used twice to display two
1
punctuation marks:
L
e
t
’
s
e
a
t
.
• To shift the case in T9 mode, use the
key.
There are three cases; Lower case ( ), Initial
Capital ( Ab ) and Capital lock ( ).
• You can move the cursor by using the Left and
Right keys. To delete letters, press the
C
key.
Press and hold the key to clear the display.
C
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering text
Using alphabet mode
Use the
1
to
0
keys to enter your text.
1. Press the keys labelled with the required letter:
- Once for the first letter
- Twice for the second letter
- And so on
2. Select the other letters in the same way.
Note: The cursor moves to the right when you press a
key. When entering the same letter twice or a
different letter on the same key, just wait for a
moment for the cursor to move to the right
automatically, and then select the next letter.
Refer to the table below for further details about the
characters available:
Characters in the order displaye
Key
Lower case
Upper case
Space
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering text
• To insert a space, press the
key.
• To shift the case in alphabet mode, use the
key. There are three cases; Lower case ( ),
Initial Capital ( Ab ) and Capital lock ( ).
• You can move the cursor by using the Navigation
key. To delete letters, press the
C
key. Press and
hold the key to clear the display.
C
Using number mode
Number mode enables you to enter numbers into a
text message. Press the keys corresponding to the
digits you want to enter.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering text
Using symbol mode
Symbol mode enables you to insert symbols into a
text message.
Symbol
OK
10
To
Press the
select a symbol
corresponding number
key.
display more symbols
Up or Down key.
insert the symbol(s)
into your message
OK soft key.
cancel your input and
return to the previous
mode
soft key.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the menus
The phone offers a range of functions that allows you
to tailor it to your needs. These functions are arranged
in menus and sub-menus.
The menus and sub-menus can be accessed by
scrolling with the navigation keys or by using
shortcuts.
Accessing a menu function by scrolling
1. In idle mode, press the Menu soft key to access
menu mode.
2. Scroll with the Up or Down key to reach a main
menu, Phone settings for example. Press the
Select soft key or the Right key to enter the menu.
3. If the menu contains any sub-menus, Language
for example, you can access them by scrolling with
the Up or Down key and pressing the Select soft
key or the Right key.
If the menu that you have selected contains further
options, repeat this step.
4. To
scroll through the
Press the
Up or Down key, or use
menus
the
and
keys on
the left side of the
phone.
confirm the chosen
setting
Select soft key or the
Right key.
return to the previous
menu level
soft key or the Left
key.
exit the menu without
changing the settings
key.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the menus
Accessing a menu function by using
its shortcut
The menu items, e.g., menus, sub-menus, and
options, are numbered and can be accessed quickly
by using their shortcut numbers. The shortcut
number is shown on the bottom right next to the
soft key on the display. Simply press the Menu soft
key and enter the number of the menu you want.
Note: The numbers assigned to each menu are
indicated on the list starting on page 47. They
may not match the menu numbers on the
phone, depending on the services supported by
your SIM card.
Example: Accessing the Language option.
1. Press the Menu soft key.
2. Press the
3. Press the
5
4
key for Phone settings
.
key for Language
.
The languages available display.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the menus
List of menu functions
The following list shows the menu structure
available and indicates the number assigned to
each option and the page where you can find a
description of each feature.
1. Text messages (see page 64)
1.1 Inbox
1.2 Outbox
1.3 Write new
1.4 Templates
1.5 Settings
*
1.5.1 Setting 1
1.5.2 Setting 2
*
1.5.3 Common setting
1.6 Delete all
1.7 Memory status
1.7.1 SIM memory
1.7.2 Phone memory
1.7.3 CB memory
1.8 Voice mail
1.8.1 Connect to voice server
1.8.2 Voice server number
1.9 Broadcast
1.9.1 Read
1.9.2 Receive
1.9.3 Channel list
1.9.4 Language
* Shown only if it is supported by your SIM card.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the menus
2. Multimedia messages (see page 75)
2.1 Inbox
2.2 Outbox
2.3 Draft
2.4 Write new
2.5 Templates
2.6 Delete all
2.7 Memory status
2.8 Setup
2.8.1 Delivery report
2.8.2 Read reply
2.8.3 Auto download
2.8.4 Message acceptance
2.8.5 Hide ID
2.8.6 Expiry date
2.8.7 Delivery time
2.8.8 Priority
2.8.9 Report allowed
2.8.10 Page duration
2.9 MMS profile
3. Call records (see page 87)
3.1 Missed calls
3.2 Received calls
3.3 Dialled calls
3.4 Delete all
3.5 Call time
3.5.1 Last call time
3.5.2 Total sent
3.5.3 Total received
3.5.4 Reset timers
*
3.6 Call cost
3.6.1 Last call cost
3.6.2 Total cost
3.6.3 Max cost
3.6.4 Reset counters
3.6.5 Set max cost
3.6.6 Price/Unit
* Shown only if it is supported by your SIM card.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the menus
4. Sound settings (see page 91)
4.1 Ring tone
4.2 Ring volume
4.3 Alert type
4.4 Keypad tone
4.5 Message tone
4.5.1 SMS tone
4.5.2 SMS-CB tone
4.5.3 MMS tone
4.6 Alert on call
4.7 Power on/off
4.8 Extra tones
5. Phone settings (see page 96)
5.1 Display settings
5.1.1 Wallpaper
5.1.2 Menu style
5.1.3 Auto key lock
5.1.4 Contrast
5.1.5 Backlight
5.1.6 Graphic logo
5.2 Greeting message
5.3 Own number
5.4 Language
5.5 Security
5.5.1 PIN check
5.5.2 Change PIN
5.5.3 Phone lock
5.5.4 Change password
5.5.5 Privacy
5.5.6 SIM lock
5.5.7 FDN mode
*
*
5.5.8 Change PIN2
5.6 Extra settings
5.7 Short cut
5.7.1 Key up
5.7.2 Key down
5.7.3 Key right
5.7.4 Key left
5.8 Reset settings
* Shown only if it is supported by your SIM card.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the menus
6. Organiser (see page 105)
6.1 Alarm
6.1.1 One time alarm
6.1.2 Daily alarm
6.1.3 Morning call
6.1.4 Remove alarm
6.1.5 Autopower
6.2 Calendar
6.3 Time & Date
6.3.1 Set time
6.3.2 Set date
6.3.3 World time
6.3.4 Time format
6.4 Calculator
6.5 To do list
6.6 Voice memo
6.6.1 Voice record
6.6.2 Memo list
6.6.3 Delete all
6.6.4 Memory status
6.7 Currency exchange
7. Network services (see page 116)
7.1 Call diverting
7.1.1 Divert always
7.1.2 Busy
7.1.3 No reply
7.1.4 Unreachable
7.1.5 Cancel all
7.2 Call barring
7.2.1 All outgoing
7.2.2 International
7.2.3 International except to home
7.2.4 All incoming
7.2.5 Incoming while abroad
7.2.6 Cancel all
7.2.7 Change barring password
7.3 Call waiting
7.4 Network selection
7.5 Caller ID
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the menus
7.6 Closed user group
7.6.1 Index list
7.6.2 Outside access
7.6.3 Default group
*
7.6.4 Deactivate
8. Funbox (see page 125)
8.1 WAP browser
8.1.1 Home
8.1.2 Favorite
8.1.3 http://
8.1.4 Settings
8.1.5 Clear cache
8.1.6 Push message
8.2 Games
8.3 Sounds
8.4 Images
8.5 Delete all
8.6 Memory status
8.6.1 Games
8.6.2 Sounds & Images
**
9. SIM AT
(see page 136)
* Shown only if the Closed user group Feature is active.
** Shown only if it is supported by your SIM card.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Phonebook
You can store phone numbers and their
corresponding names in the memory of your SIM
card and phone’s memories. They are physically
separate but are used as a single entity, called
Phonebook.
Storing a number with a name
There are two ways to store a number:
• Using the Save soft key in idle mode
• Using the New entry option in the Phonebook
menu
Storing a number in idle mode
As soon as you start to enter a number, Save
appears above the left soft key to allow you to store
the number in Phonebook.
1. Enter the number you want to store.
Note: If you make a mistake while entering a
number, correct it using the
further details, see page 25.
C
key. For
2. When you are sure that it is correct, press the
Save soft key.
3. Select an icon to identify the category of the
number to be stored. Three categories are
available:
•
•
•
: Mobile phone number
: Office number
: Home number
To select the category, press the Left or Right
key and press the Select soft key.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Phonebook
4. Select a memory location, either SIM or Phone
by pressing the Up or Down key and press the
Select soft key.
,
Note: When you change phones, any numbers
stored in your SIM card memory are
automatically available with the new phone,
whereas any numbers stored in the phone’s
memory must be reentered.
5. Enter a name and press the OK soft key.
The maximum length of a name depends on
your SIM card. For further details about how to
enter characters, see page 38.
6. If you do not want to save the number and
name in the suggested location, press the
C
key
to clear the location number and enter another
location by pressing the number keys.
7. Press the OK soft key to store the name and
number.
After storing, the phone displays the Phonebook
entry or name you just created.
8. To
use the entry options
Press the
Options soft key. For
further details, see
page 55.
return to the idle
screen
key.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Phonebook
Storing a number using the Phonebook
menu
1. When the idle screen displays, press the Name
soft key.
2. Scroll to New entry by pressing the Up or Down
key and press the Select soft key.
3. Select an icon to identify the category of the
number to be stored by pressing the Left or
Right key, and press the Select soft key.
Note: The e-mail icon (
) is available in this
step. It allows you to save an e-mail
address instead of a phone number.
4. Select a memory location, either SIM or Phone
by pressing the Up or Down key and press the
Select soft key
,
5. Enter a name and press the OK soft key.
The maximum length of a name depends on
your SIM card. For further details about how to
enter characters, see page 38.
6. Enter the number or address you want to store
and press the Save soft key.
7. Continue the procedure from Step 6 on page 53
to store the number.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Phonebook
Using Phonebook entry options
While accessing any Phonebook entry, press the
Options soft key to access the options for the
entry.
To
Press the
select the
Select soft key.
highlighted option
highlight a
different option
Up or Down key until the
option you want highlights.
The following options are available:
Paste: allows you to paste the number into the
normal dialling mode. Use this option to dial a
number similar to one in the Phonebook, such as a
different extension in the same office.
Use the
see page 25 for further details. When you are ready
to dial, press the key.
C
key to change the number as required;
Edit allows you to edit the name and number.
:
Select One entry to change one number for the
selected name. If you change the name, the
number is saved separately. Select All entries to
change the name of the entry.
Delete: allows you to delete the name and number
from Phonebook. You are asked to confirm that you
wish to delete the name and number by pressing
the Yes soft key.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Phonebook
Copy: allows you to copy the number to another
location. Use this option to store a number similar
to one already in the memory; once copied, edit the
number and store it in Phonebook.
Caller group: allows you to organise Phonebook
entries in caller groups so that the phone alerts you
in a specific way when a person from one of the
groups calls you. Select one of the ten groups
available.
To remove an entry from a group, select the No
group option.
For further details about how to change caller group
properties, see page 59.
Add entry: allows you to add a new number to the
currently selected name.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Phonebook
Searching for a number in
Phonebook
After storing numbers in Phonebook, you can
search for them in two ways: by name or by caller
group.
Searching for a number by name
1. When the idle screen displays, press the Name
soft key.
2. Press the Select soft key when Search
highlights. You are asked to enter a name.
3. Enter the first few letters of the name that you
want to find.
The Phonebook entries are listed, starting with
the first entry matching your input.
4. To
view the highlighted
Press the
View soft key.
entry
Up or Down key until
the entry highlights.
select a different
entry
key labelled with the
letter you want to
enter.
look for a name
starting with a
different letter
5. Once you have found the entry, press the
key to dial the number, or press the Options
soft key to access the Phonebook entry options;
for further details, see page 55.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Phonebook
Searching for a number by caller group
1. When the idle screen displays, press the Name
soft key.
2. Scroll to Group search by pressing the Up or
Down key and press the Select soft key. You are
asked to enter a group name.
3. Enter the first few letters of the group name that
you want to find.
The caller groups are listed, starting with the
first group matching your input.
4. If necessary, scroll to a group by pressing the Up
or Down key and press the View soft key.
The Phonebook entries in the caller group are
listed.
5. To
Press the
view the highlighted View soft key.
entry
select a different
entry
Up or Down key until
the entry you want
highlights.
6. Once you have found the entry, press the
key to dial the number, or press the Options
soft key to access the Phonebook entry options;
for further details, see page 55.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Phonebook
Editing a caller group
1. When the idle screen displays, press the Name
soft key.
2. Scroll to Edit group by pressing the Up or Down
key and press the Select soft key.
3. Scroll through the list of groups by pressing the
Up or Down key.
4. When the group you want highlights, press the
Options soft key.
5. Select each option and change the settings, as
required. The following options are available:
•
•
•
•
Call ring tone: allows you to set a ring tone
to be used when you receive a voice call from
a person in the group.
SMS tone: allows you to set a message tone
to be used when you receive a message from a
person in the group.
Graphic: allows you to set a graphic icon to be
displayed when you receive a voice call from a
person in the group.
Group name: allows you to assign a name to
the group. For further details about how to
enter characters, see page 38.
6. When you have finished changing the settings,
press the or key.
C
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Phonebook
Speed-dialling
Once you have stored phone numbers in
Phonebook, you can set up to eight speed-dial
entries and then dial them easily whenever you
want, simply by pressing the associated number
key.
Setting up speed-dial entries
1. When the idle screen displays, press the Name
soft key.
2. Scroll to Speed dial by pressing the Up or Down
key and press the Select soft key.
3. Select the key to which you wish to assign the
speed-dialling number, from the
2
to
9
keys,
and press the OK soft key.
Note: If you have already assigned a number to
the key, the Options soft key replaces the
OK soft key. Go to Step 6.
4. Select a Phonebook entry from the list and press
the View soft key.
5. Select a number, if the entry has more than one,
by pressing the Up or Down key and press the
Select soft key.
6. Once you have assigned a phone number to the
key, you can use the following options by
pressing the Options soft key:
•
Change: allows you to assign a different
phone number to the key.
•
Delete: allows you to clear the setting so that
no number is assigned to the key.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Phonebook
•
•
Delete all: allows you to clear the settings for
all keys so that no numbers are assigned to
any of the keys.
Number: allows you to view the number
assigned to the key.
7. When you have finished setting the options,
press the or key.
C
Speed-dialling from Phonebook
To speed-dial the numbers assigned to keys
press and hold the appropriate key.
2
to
9,
Note: Memory location 1 is reserved for your Voice
mail server number.
Deleting all Phonebook entries
You can delete all of the entries in a selected
memory or both memories.
1. When the idle screen displays, press the Name
soft key.
2. Scroll to Delete all by pressing the Up or Down
key and press the Select soft key.
3. To place a check mark by the memory you want
to empty, All SIM, or Phone, press the Mark
,
soft key.
You can remove the check mark by pressing the
Unmark soft key.
4. When you have finished marking, press the
Delete soft key to delete the entries in the
selected memory.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Phonebook
5. Enter the phone password and press the OK soft
key.
Note: The password is preset to “00000000” at
the factory. To change it, see page 101.
6. When the confirming message appears, press
the Yes soft key.
To cancel the deletion, press the No soft key.
7. When you finish deleting, press the
key.
C
or
Checking memory status
You can check how many names and numbers are
stored in Phonebook, in both the SIM card and
phone memories. You can also see the capacity of
both memories.
1. When the idle screen displays, press the Name
soft key.
2. Select the Memory status option by pressing
the Up or Down key and press the Select soft
key.
3. Press the Up or Down key to view the number of
existing entries, and the number of spaces still
available in the SIM card and phone memories.
4. When you have finished checking, press the
key.
C
or
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Phonebook
Using service dialling numbers
You can view a list of Service dialling numbers
(SDN) assigned by your network provider. Such
numbers include the emergency, directory
enquiries, and voice mail numbers.
1. In idle mode, press the Name soft key.
2. Select the SDN option by pressing the Up or
Down key and press the Select soft key.
3. Scroll through the numbers by using the Up or
Down key.
4. To dial the number displayed, press the Dial soft
key.
Note: This option is available only when your SIM
card supports Service dialling numbers
(SDN).
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Text messages
Short Message Service (SMS) allows you to send
and receive short text messages to and from other
GSM mobile phones. In addition, your phone
supports the Enhanced Messaging Service (EMS),
which enables you to make messages that include
simple pictures, melodies, and animation. To use
this feature, you must subscribe to the message
service of your service provider.
When the Message icon ( ) appears, you have
received new text messages. If the memory is full,
an error message displays and you cannot receive
any new messages. Use the Delete option in each
message box to delete old messages to allow the
new ones to come in.
Inbox (Menu 1.1)
This message box is used to store the messages
that you have received.
When you enter this menu, the list of messages in
the box displays with the senders’ phone numbers
or names, if available in Phonebook.
1. Select a message from the list and press the
View soft key to read the message contents.
2. To scroll through the contents, press the Up or
Down key.
3. To scroll to the previous or next message, press
the
or
key.
While reading a message, you can choose the
following options by pressing the Options soft key:
Delete: allows you to delete the message.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Text messages
Send: allows you to resend the message. For
further details about how to send a message, see
page 67.
Text reply: allows you to reply to the sender by
sending a text message.
Call back: allows you to call the sender back.
Cut address: allows you to extract the sender’s
number and URL /e-mail addresses or phone
numbers from the message text, so that you can
save them in your phone’s memory or SIM card.
Move to phone: allows you to move the message
from the SIM card to the phone memory. This
option is only available when you select a message
stored in the SIM card.
Move to SIM: allows you to move the message
from the phone memory to the SIM card. This
option is only available when you select a message
stored in the phone memory.
Select objects: allows you to save media objects,
such as sounds or images, from the message into
your phone. You can use the objects when writing
future messages. For details, see page 68.
Outbox (Menu 1.2)
This message box is used to store the messages
that you have already sent or will send.
When you enter this menu, the list of messages
displays with the recipients’ phone numbers or
names, if available in Phonebook.
1. Select a message from the list and press the
View soft key to read the message contents.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Text messages
2. To scroll through the contents, press the Up or
Down key.
3. To scroll to the previous or next message, press
the
or
key.
While reading a message, you can choose the
following options by pressing the Options soft key:
Delete: allows you to delete the message.
Send: allows you to resend the message. For
further details about how to send a message, see
page 67.
Cut address: allows you to extract the destination
number and URL /e-mail addresses or phone
numbers from the message text, so that you can
save them in your phone’s memory or SIM card.
Move to phone: allows you to move the message
from the SIM card to the phone memory. This
option is only available when you select a message
stored in the SIM card.
Move to SIM: allows you to move the message
from the phone memory to the SIM card. This
option is only available when you select a message
stored in the phone memory.
Select objects: allows you to save media objects,
such as sounds, melody, picture, or animation from
the message into your phone. You can use the
objects when writing a message. For details, see
page 68.
Write new (Menu 1.3)
In this menu, you can write and send a text
message.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Text messages
Note: When you add media objects to the message,
the number of characters you can enter
decreases.
Creating a simple text message
1. Create your message.
Note: For further details about entering
characters, see page 38.
2. When you finish entering the message, press
the Options soft key. The following options are
available:
•
Send only: allows you to send the message.
The message is deleted after sending.
•
Save and send: allows you to save a copy of
the message and then send the message. You
can read the message in your Outbox.
•
Save only: allows you to save the message so
that it can be sent later. You can read the
message in your Outbox.
• For further details about Text formatting
Add objects Add templates Add
phonebook Add bookmark, and Language
,
,
,
,
options, see page 68.
3. Select Send only or Save and send, and press
the Select soft key.
If you want to just save the message, select
Save only. After saving the message, the phone
returns to the Text messages menu.
4. If you select a save option, choose the memory
where the message is to be saved and press the
OK soft key.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Text messages
5. Enter a destination number and press the OK
soft key.
The message is sent.
Note: If transmission fails, the phone will ask you if
you want to retry. Press the OK soft key to
confirm. Otherwise, press the Exit soft key to
return to the SMS New screen.
Creating a message using the options
1. Create a message.
2. Press the Options soft key.
3. Select one of the following options by using the
Up and Down keys and pressing the Select soft
key:
•
Text formatting: allows you to format the
style of the text. For the Size attribute,
Normal
,
Large, and Small sizes are
available. For the Underline and
Strikethrough attributes, select On or Off
.
These attributes can be combined.
•
Add objects: allows you to add a sound,
melody, picture, or animation to the message.
Select the category of the object to be added.
In each category, you can select the various
factory-set items, or choose an item received
from other sources, such as items downloaded
from the Internet, or received in multimedia
messages.
•
Add templates: allows you to apply one of
the preset message templates to the text.
Select one of five messages stored in the
Templates menu (Menu 1.4). For further
details, see page 69.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Text messages
•
•
•
Add phonebook: allows you to add a
Phonebook entry to your message. Select one
from the list.
Add bookmark: allows you to add a web
page’s address stored in your Favorite list
(Menu 8.1.2). Select one from the list.
Language: allows you to change the language
to be used in the T9 input mode. Select the
language to be used.
4. Complete the message, and send or save it by
following the procedure from Step 2 on page 67.
Templates (Menu 1.4)
Using this menu, you can preset up to five
messages that you use frequently.
Select an empty location or the message template
you want and press the Options soft key.
The following options are available:
Edit: allows you to write a new message or edit the
message.
Note: For further details about how to enter
characters, see page 38.
Send message: allows you to send the message.
Once you have completed the message, you can
send, save and send, or simply save it. For further
details about how to send a message, see page 66.
Delete: allows you to delete the message. You are
asked to confirm the deletion by pressing the Yes
soft key.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Text messages
Settings (Menu 1.5)
In this menu, you can set up default SMS
information. A setting group is a collection of
settings required to send messages. The number of
setting groups available depends on the capacity of
your SIM card.
Note: The last setting you accessed is automatically
activated for sending messages.
Setting x (where
x
is the setting group number):
each group has its own sub-menu.
Service centre: allows you to store or change the
number of your message centre, which is required
when sending messages. You must obtain this
number from your service provider.
Default destination: allows you to store the default
destination number. The number automatically
displays on the Destination screen when you create
a message.
Default type: allows you to set the default message
type to Text Fax, Email, or Paging. The network
,
can convert the messages into the selected format.
Default validity: allows you to set the length of time
your text messages are stored at the message
centre while attempts are made to deliver them.
Setting name: allows you to give a name to the
setting group currently being defined.
Common setting: The following options are
available:
Reply path: allows the recipient of your message to
send you a reply via your message centre, if your
network supports this service. To enable or disable
this option, choose On or Off
.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Text messages
Delivery reports: allows you to activate or
deactivate the report function. When this function is
activated, the network informs you whether or not
your message has been delivered. To enable or
disable this option, choose On or Off
.
Bearer selection: allows you to choose either GSM
or GPRS prefered, depending on your network.
Character support: allows you to choose a character
type from among GSM-alphabet Uni-code, or
,
Automatic. If you select Uni-code and your
recipient’s phone does not support it, your recipient
may not be able to read your message.
Delete all (Menu 1.6)
This menu allows you to delete all of the text
messages in each message box. You can also delete
all of your messages at one time.
To
Press the
select a message
box to clear
Up or Down key. To delete
all of your messages,
select All messages
.
place a check mark
Mark soft key.
remove a check
mark
Unmark soft key.
delete the marked
messages
Delete soft key.
When a confirming message displays, press the Yes
soft key to confirm.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Text messages
Memory status (Menu 1.7)
This menu shows how many messages are currently
stored in the SIM, phone, and CB (Cell broadcast)
memories.
Voice mail (Menu 1.8)
This menu provides you with a way of accessing
your voice mailbox, if your network supports this
service.
The following options are available:
Connect to voice server: before using this
feature, you must enter the voice server number
obtained from your service provider (see Menu
1.8.2). You can then select a server number from
the list and press the OK soft key to listen to your
messages.
You can quickly connect to the voice server by
pressing and holding the
1
key in idle mode.
Voice server number: allows you to change the
voice mail server number, if necessary.
To
Press the
corresponding numeric
keys.
enter the server
number
correct a digit
C
key.
move the cursor to the
left or right without
clearing a digit
Left or Right key.
Note: Voice Mail is a network feature. Please contact
your service provider for further details.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Text messages
Broadcast (Menu 1.9)
This network service allows you to receive text
messages on various topics, such as the weather or
traffic. Cell Broadcast (CB) messages display as
soon as they are received, provided that:
• the phone is in idle mode.
• the Receive option is set to Enable
.
• the message channel is currently active on the
channel list.
The following options are available:
Read: lets you view the received message. The
Volatile box displays messages from the network,
but loses its contents as soon as the phone is
switched off. Scroll through the message by using
the Up and Down keys. While reading a message,
press the Save soft key to store the message in the
Archive box for later retrieval.
Receive: allows you to enable or disable the
reception of broadcast messages.
Channel list: allows you to indicate the channels
from which you wish to receive broadcast
messages. The following options are available:
Select: use to enable or disable channels on the list
by marking or unmarking them respectively. A
check mark displays next to each selected channel.
Add channel: use to enter the ID and title for a new
channel.
Delete: use to remove a channel from the list.
Edit: use to change the ID and title of an existing
channel.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Text messages
Language: allows you to select your preferred
language to display cell broadcast messages.
Please contact your service provider for further
details.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia messages
Multimedia Message Service (MMS) is a messaging
service very similar to Short Message Service
(SMS). It provides automatic and immediate
delivery of personal multimedia messages from
phone to phone or from phone to e-mail.
In addition to the familiar text content of text
messages, multimedia messages can contain
images, graphics, voice, and audio clips. Images
could include downloads of graphics and photos,
and photos you have taken, while voice and audio
clips could be downloaded or recorded sounds. An
MMS message is a multimedia presentation in a
single entry. It is not a text file with attachments.
Using MMS, your phone can send and receive these
multimedia messages. This function is available
only if it is supported by your service provider. Only
phones that offer multimedia message features can
receive and display multimedia messages.
Inbox (Menu 2.1)
Viewing a message when you receive it
When a new multimedia message comes in, the
display shows a text notification along with the
sender’s number.
1. Press the View soft key to view the message.
The display shows brief information about the
message, such as the sender’s number, the
message size, and the subject.
If you want to view the message from the Inbox
at another time, press the Exit soft key.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia messages
2. To scroll through the message contents, press
the Up or Down key.
While viewing the message, press the Options soft
key to use the following options:
Retrieve: retrieves the message from the MMS
server.
Delete: deletes the message.
More Information: shows you detailed
information about the message.
Viewing a received message from the
Inbox
When you access the Inbox menu (Menu 2.1), the
list of multimedia messages you have received
displays with the senders’ phone numbers or name,
if they are available in Phonebook, or subjects. The
icon to the left tells you the status of the message.
•
•
: Messages you have already read.
: Messages you haven’t read yet.
1. Select a message on the list and press the
Select soft key.
The display presents the message and scrolls to
the next page, if there is one, after a specified
time; for details about setting this time interval,
see page 85.
2. Press the OK soft key to go to the message view
screen.
Or, the display automatically switches to the
screen.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia messages
3. To scroll through the message, press the Up or
Down key.
If the message has more than one page, you
can scroll through the pages by using the Left
and Right keys.
While viewing a message, you can select Message
options by pressing the Options soft key.
If you are viewing a new message, the options are
the same as when you view a message as soon as
you receive it. See the previous section.
When you are reviewing a message, the following
options are available:
Delete: deletes the message.
Reply: allows you to reply to the sender by sending
a text or multimedia message.
Callback: allows you to call the sender back.
Cut address: allows you to extract the sender’s
number, so that you can dial the number or save it
in Phonebook.
Forward: allows you to forward the message to
another person.
Save picture: allows you to save an image from
the message on your phone. Images are stored in
the Images folder (Menu 8.4).
Save sound: allows you to save a sound from the
message into the Sounds folder (Menu 8.3).
Properties: shows you information about the
message, such as subject, sender’s address,
message size, status, and priority.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia messages
Outbox (Menu 2.2)
When you access this menu, the list of the
multimedia messages you have sent or saved
displays. The icons on the left tell you the status of
the messages.
•
•
•
•
•
: Messages currently being sent
: Messages sent
: Messages your phone couldn’t send
: Messages to be sent
: Messages deferred
1. Select a message on the list and press the
Select soft key.
The display presents the message and scrolls to
the next page, if it has one, after a specified
time; for details about setting this time interval,
see page 85.
2. Press the OK soft key to go to the message view
screen.
Or, the display automatically switches to the
screen.
3. To scroll through the message, press the Up or
Down key.
If the message has more than one page, you
can scroll through the pages by using the Left
and Right keys.
While viewing a message, you can select the
following options by pressing the Options soft key:
Delete: deletes the message.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia messages
Cut address: allows you to extract the destination
numbers or addresses, so that you can dial a
number or save them in Phonebook.
Send: allows you to resend the message.
Edit message: allows you to change the message
contents, text, sound, or picture.
Properties: shows you information about the
message, such as subject, sender’s address,
message size, status, and priority.
Draft (Menu 2.3)
After creating a multimedia message, you can store
it in this message box and send it later.
For further details about viewing a message, see
“Outbox” on page 78.
Write new (Menu 2.4)
This menu allows you to create a new multimedia
message and then send it to multiple destinations.
Creating and sending a multimedia
message
1. Enter the subject of your message and press the
OK soft key.
For further details about entering characters,
see page 38.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia messages
2. When Add here highlights, press the Options
soft key and add the message contents using
one of the following options:
•
Add text: enter the message text and press
the OK soft key.
•
Add picture: allows you to add a picture from
the Images folder (Menu 8.4). Choose a
picture and press the Select soft key. It may
not be possible to add certain downloaded
pictures, due to their file format.
•
Add sound: allows you to add a sound file.
Select Record to record a new voice memo, or
Sound list to add one of sounds from the
Sounds folder (Menu 8.3) or Memo list
(Menu 6.6.2). It may not be possible to add
certain downloaded sounds, due to their file
format.
•
•
•
Send: allows you to send the message. Use
this option when you have finished creating
the message. This option is activated after you
add content to the message.
Save: saves the message in the Draft
(Menu
2.3) or Templates Menu 2.5) box for later
(
use. This option is activated after you add
content to the message.
Settings: allows you to change the message
settings. For further details about each setting
option, see page 85. After changing the
settings, you need to press the
soft key or
the key to go back to the options screen.
C
•
Add destination: allows you to enter
destination numbers or addresses. See steps 7
to 12 beginning on page 82. After adding
them, you need to press the
soft key or the
C
key to go back to the options screen.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia messages
•
Preview: shows your message as it will
display on the recipient’s phone.
Note: Only a single text entry, image file, and
sound file can be added on each page.
3. When the content to be added displays, press
the Down key to highlight Add here
.
4. Repeat steps 2 and 3 until you have finished
creating your message.
5. If you want to change the added items, press
the Up or Down key to highlight one and press
the Options soft key. The following options are
available:
•
Edit text/picture/sound: allows you to
change text or replace the image or sound
with another one.
•
Add page: allows you to add more pages. You
can move to each page using the Left or Right
key when Page highlights on the message
screen.
•
•
Delete: deletes the item from your message.
Duration: allows you to set how long text, an
image, or a sound displays on the message
presentation screen. After the specified time,
the display scrolls to the next item and then
continues to the next page.
•
•
Send: allows you to send the message.
Save: saves the message in the Draft
(
Menu
2.3) or Templates
(Menu 2.5) box for later
use.
•
Settings: allows you to change the message
settings. For further details about each setting
options, see page 85.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia messages
•
•
Add destination: allows you to enter
destination addresses. See steps 7 to 12.
Preview: shows your message as it will
display on the recipient’s phone.
Note: The options available are different
depending on the item you select on the
message screen.
6. When you have finished creating the message,
choose Send from the options and press the
Select soft key.
7. Select To Cc or Bcc to enter a destination
,
number or address and press the Select soft
key.
8. Choose one of the following options and press
the Select soft key:
•
Phone number: allows you to enter the
phone number you want.
•
E-mail address: allows you to enter the e-
mail address of the recipient if you intend to
send the message as an e-mail.
•
Phone book: allows you to retrieve a number
from Phonebook.
9. Enter a number or an e-mail address, or select
a number in Phonebook.
10. When the correct number or address displays,
press the OK soft key.
11. To add a destination, press the Select soft key
when Add destination highlights. Repeat from
step 8.
If you want to edit the destinations, select one
and press the Select soft key. You can change
or delete it.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia messages
12. When you have finished adding destinations,
press the
C
key or the
soft key.
13. To enter more numbers or addresses, repeat
steps 7 through 12.
You can enter up to 10 destinations in the To
,
CC, and Bcc fields.
14. When you have finished entering destinations,
select Send message and press the Select
soft key on the Picture Msg Send screen.
Your phone sends the message.
Templates (Menu 2.5)
This menu stores messages you save as templates
so that you can use them to make new messages.
1. Scroll through the template list using the Up or
Down keys.
2. When the message template you want
highlights, press the Select soft key.
3. Press the OK soft key to use the following
options, or the display automatically shows the
options after a specified time:
•
Edit message: allows you to send a message
using the template. For further details about
how to send a message, see page 79.
•
Delete: allows you to delete the message. You
are asked to confirm the deletion by pressing
the Yes soft key.
4. Press the
key to return to idle mode.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia messages
Delete all (Menu 2.6)
This menu allows you to delete all of the multimedia
messages in each message box. You can also delete
all of your messages at one time.
To
Press the
select a message
box to clear
Up or Down key. To delete
all of your messages,
select All messages
.
place a check mark
Mark soft key.
remove a check
mark
Unmark soft key.
delete the marked
messages
Delete soft key.
When a confirming message displays, press the Yes
soft key to confirm.
Memory status (Menu 2.7)
You can check the memory status for multimedia
messages. The display shows the total space,
including the free and used space. It also shows
how much space is currently occupied by the
contents of each message box.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia messages
Setup (Menu 2.8)
You can change the default settings for sending or
receiving multimedia messages.
The following options are available:
Delivery report: when this option is enabled, the
network informs you whether or not your message
has been delivered.
Read reply: when this option is enabled, your
phone sends a request for a reply along with your
message to the recipient.
Auto download: you can set whether or not your
phone retrieves new incoming messages from the
MMS server without notifications.
Message acceptance: you can specify the
category of messages you want to receive.
Hide ID: when this option is enabled, your phone
number does not display on a recipient’s phone.
Expiry date: you can select the length of time your
messages are stored at the message centre after
they are sent.
Delivery time: you can set a delay time before the
phone sends your messages.
Priority: you can select the priority level of your
message from High, Normal, and Low.
Report allowed: when this option is disabled, the
sender of an incoming message does not receive a
delivery report from the network.
Page duration: you can set how long one page of
the received message displays on the message
presentation screen. After the specified time, the
display automatically scrolls to the next page.
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia messages
MMS profile (Menu 2.9)
In this menu, you can configure various network
settings that are required when you send or receive
multimedia messages.
Notes
:
• The last profile you accessed is automatically
activated for sending messages.
• If you change the MMS settings without the service
provider’s instructions, the MMS feature may not
work properly.
The following options are available for each profile:
Profile name: enter a name that you wish to
assign to these MMS settings.
Connection URL: enter the address of your MMS
server.
Security: select a data transmission mode. Choose
Secure to protect your data against unauthorised
access; otherwise, choose Non-secure
.
IP address: enter the gateway address required to
connect to the MMS server.
User name: enter the user ID required to connect
to the MMS server.
Password: enter the password required to connect
to the MMS server.
APN: enter the access point name used for the
address of the MMS server.
For further details, contact your service provider.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Call records
In this menu, you can view:
• calls you have missed, received, or dialled.
• the length of your calls.
• the cost of your calls.
Notes
:
• You can access phone numbers that are in the three
types of call records by pressing the
mode.
key in idle
• The number of call records the phone can store may
be different depending on your SIM card.
Missed calls (Menu 3.1)
This menu lets you view the numbers of the calls
you received, but did not answer.
The number and name, if available, display together
with the date and time when the call was received.
By pressing the Options soft key, you can:
• edit the number, if available, and dial it or save it
in Phonebook.
• delete the call from the list.
You can also dial the number by pressing the
key.
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Call records
Received calls (Menu 3.2)
This menu lets you view the numbers of the calls
you received.
The number and name, if available, display together
with the date and time when the call was received.
By pressing the Options soft key, you can:
• edit the number, if available, and dial it or save it
in Phonebook.
• delete the call from the list.
You can also dial the number by pressing the
key.
Dialled calls (Menu 3.3)
This menu lets you view the numbers you dialled.
The number and name, if available, display together
with the date and time when the call was made.
By pressing the Options soft key, you can:
• edit the number and dial it or save it in
Phonebook.
• delete the call from the list.
You can also dial the number by pressing the
key.
88
Download from Www.Somanuals.com. All Manuals Search And Download.
Call records
Delete all (Menu 3.4)
This menu allows you to delete all of the records in
each call type. You can also delete all of your call
records at one time.
To
Press the
select a call type to
clear
Up or Down key. To delete
all of your call records,
select All calls
.
place a check mark
Mark soft key.
remove a check mark Unmark soft key.
delete the marked
messages
Delete soft key.
When a confirming message displays, press the Yes
soft key to confirm.
Call time (Menu 3.5)
This menu lets you view the timers for calls made
and received.
Note: The actual time invoiced for calls by your
service provider may vary, depending on
network features, rounding-off for billing
purposes, and so on.
The following timers are available:
Last call time: length of the last call.
Total sent: total length of all calls made since the
timer was last reset.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Call records
Total received: total length of all calls received
since the timer was last reset.
Reset timers: option used to reset the call timers.
You must first enter the phone password (see
page 140) and then press the OK soft key.
Call cost (Menu 3.6)
This network feature lets you view the cost of calls.
This menu may not be shown depending on your
SIM card.
The following options are available:
Last call cost: cost of the last call made.
Total cost: total cost of all calls made since the
cost counter was last reset. If the total cost exceeds
the maximum cost set in the Set max cost option,
you cannot make any calls until you reset the
counter.
Max cost: maximum cost set in the Set max cost
option. See below.
Reset counters: option used to reset the cost
counter. You must first enter your PIN2 (see
page 142) and then press the OK soft key.
Set max cost: option used to enter the maximum
cost that you authorise for your calls. You must first
enter your PIN2 (see page 142) and then press the
OK soft key.
Price/Unit: option used to set the cost of one unit
(usually a small time interval, like 5 seconds or 10
seconds); this price per unit is applied when
calculating the cost of your calls. You must first
enter your PIN2 (see page 142) and then press the
OK soft key.
90
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound settings
You can use the Sound settings feature to
customise various settings, such as the:
• ring melody, volume, and type.
• sounds made when you press a key, receive a
message, or switch your phone on/off.
• alert tone made every minute during a call, when
you make an error, or when your phone connects
to the system.
Note: When the phone is in silent mode (see
page 30), you cannot change the sound
settings.
Ring tone (Menu 4.1)
This menu allows you to select a ring melody.
You can choose between many different melodies.
Each time you select a melody, the melody plays. If
you have downloaded sounds from the Internet or
EasyGPRS programme, you can use them in this
menu.
Ring volume (Menu 4.2)
This menu allows you to adjust the ring volume to
one of five levels.
Use the Up and Down keys or the volume keys on
the left side of the phone to increase or decrease
the volume.
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound settings
Alert type (Menu 4.3)
This menu allows you to specify how you are to be
informed of incoming calls.
The following options are available:
Melody: the phone plays the ring melody selected
in the Ring tone menu (Menu 4.1); see page 91.
Vibration: the phone vibrates, but does not ring.
Vibra+melody: the phone first vibrates three
times and then starts ringing.
Keypad tone (Menu 4.4)
This menu allows you to select a tone that the
keypad generates when you press a key.
The following options are available:
Off: the keys do not make any sound.
Cool: each key, when pressed, generates a
distinctive sound.
Piano: each key, when pressed, generates a
different note in the musical scale, as if played on a
piano.
Tone: each key, when pressed, makes a different
sound.
Beep: each key, when pressed, makes the same
sound.
92
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound settings
Message tone (Menu 4.5)
This menu allows you to select how the phone
informs you that a new message has been received.
SMS tone (Menu 4.5.1)
This menu allows you to select how the phone
informs you that a new text message has been
received.
The following options are available:
Off: the phone neither rings nor vibrates.
Vibration: the phone vibrates.
Single beep: the phone beeps once.
SMS tone x: the phone uses one of several tones.
SMS-CB tone (Menu 4.5.2)
This menu allows you to select how the phone
informs you that a new cell broadcast (CB) message
has been received.
The following options are available:
Off: the phone neither rings nor vibrates.
Vibration: the phone vibrates.
Single beep: the phone beeps once.
SMS-CB tone x: the phone uses one of several CB
tones.
93
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound settings
MMS tone (Menu 4.5.3)
This menu allows you to select how the phone
informs you that a new multimedia message has
been received.
The following options are available:
Off: the phone neither rings nor vibrates.
Vibration: the phone vibrates.
Single beep: the phone beeps once.
MMS tone x: the phone uses one of several tones.
Alert on call (Menu 4.6)
This menu allows you to set whether or not the
phone informs you when you receive a new
message or when the time an alarm is set to go off
comes during a call.
Off: the phone doesn’t actively alert you to
incoming messages or alarms. It only displays the
corresponding notification.
On: the phone alerts you during a call.
Power on/off (Menu 4.7)
This menu allows you to select a melody that the
phone sounds when it is switched on and off.
To turn the sound off, select Off
.
94
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound settings
Extra tones (Menu 4.8)
You can customise additional tones used for the
phone.
To turn a given
tone
Press the
on
On soft key.
A check mark displays next
to the option.
off
Off soft key.
The check mark no longer
displays.
The following options are available:
Error tone: sets whether or not the phone informs
you when you make a mistake.
Minute minder: sets whether or not the phone
beeps every minute during an outgoing call to keep
you informed of the length of your call.
Connect tone: sets your phone to beep when it
connects to a network.
95
Download from Www.Somanuals.com. All Manuals Search And Download.
Phone settings
Many different features of your phone can be
customised to suit your preferences. All of these
features are accessed in the Phone settings menu.
Display settings (Menu 5.1)
In this menu, you can change various settings for the
display or backlight.
Wallpaper (Menu 5.1.1)
Via this menu, you can change the background
image or the colour of the text displayed in idle
mode.
The following options are available:
Wallpaper list: you can select a background image
to be displayed on the idle screen.
To change the background image:
1. Scroll through the list by pressing the Up or Down
key.
You have various preset images available. You
can also select a blank background, any images
downloaded from the Internet and the EasyGPRS
programme, or received in multimedia messages.
2. Press the Select soft key when the image you
want highlights.
3. When the image displays, press the Select soft
key to display it on the idle screen.
Text display: you can specify whether or not the
phone displays text, such as the date and time and
the service provider’s name.
96
Download from Www.Somanuals.com. All Manuals Search And Download.
Phone settings
Text colour: you can select the colour of the text
to be displayed on the idle screen.
Menu style (Menu 5.1.2)
This menu allows you to select the menu display
style. You can choose either Bar style or Page
style
.
Auto key lock (Menu 5.1.3)
You can set the phone to automatically lock the
keys if no key is pressed within a given amount of
time. This feature is useful to avoid inadvertently
pressing keys.
To use this feature, select the length of time for
which the phone waits before it locks the keypad.
Contrast (Menu 5.1.4)
This menu allows you to adjust the contrast of the
display screen to see it better in different lighting
conditions.
Adjust the contrast by using the navigation keys or
the
and
keys on the left side of the phone.
Backlight (Menu 5.1.5)
You can select whether or not the phone uses the
backlight. A marginal increase in standby/talk time
can be achieved by turning the backlight off.
Select the length of time the backlight is on. The
backlight turns on when you press a key or receive
a call or message, and remains on for the specified
length of time.
97
Download from Www.Somanuals.com. All Manuals Search And Download.
Phone settings
Graphic logo (Menu 5.1.6)
This menu allows you to display your service
provider’s logo instead of its name.
Off: the service provider’s name displays in idle
mode.
On: the service provider’s logo stored in your phone
displays in idle mode; if no logo has been stored,
the service provider’s name displays.
Greeting message (Menu 5.2)
This menu allows you to set a greeting to be
displayed briefly when the phone is switched on.
To
Press the
key and hold it down until
clear the existing
message
C
the message is cleared.
enter a new
message
appropriate alphanumeric
keys.
change the text
input mode
right soft key.
For further details about how to enter characters,
see page 38.
Own number (Menu 5.3)
This feature allows you to:
• assign a name to each of your own phone
numbers registered on your SIM card.
• edit the names and numbers.
98
Download from Www.Somanuals.com. All Manuals Search And Download.
Phone settings
This function is a memory aid, which you can use to
check your own phone numbers if you need to do so.
Any changes made here do not in any way affect
the actual subscriber numbers on your SIM card.
Language (Menu 5.4)
You can select a display language. When the
language option is set to Automatic, the language
is automatically selected according to the language
of the SIM card used.
Security (Menu 5.5)
The Security feature enables you to restrict the use
of your phone to the people and the types of calls of
your choice.
Various codes and passwords are used to protect
the features of your phone. They are described in
the following sections. Also see pages 140-143.
PIN check (Menu 5.5.1)
When the PIN Check feature is enabled, you must
enter your PIN each time you switch the phone on.
Consequently, any person who does not have your
PIN cannot use your phone without your approval.
Note: Before disabling the PIN Check feature, you
must enter your PIN.
To change your PIN, refer to the Change PIN menu
(Menu 5.5.2).
99
Download from Www.Somanuals.com. All Manuals Search And Download.
Phone settings
The following options are available:
Disable: the phone connects directly to the
network when you switch it on.
Enable: you must enter the PIN each time the
phone is switched on.
Change PIN (Menu 5.5.2)
This feature allows you to change your current PIN
to a new one, provided that the PIN check feature is
enabled. You must enter the current PIN before you
can specify a new one.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
Phone lock (Menu 5.5.3)
When the Phone lock feature is enabled, the phone
is locked and you must enter the 8-digit phone
password each time the phone is switched on.
The password is preset to “00000000” at the
factory. To change the phone password, refer to the
Change password menu (Menu 5.5.4).
Once the correct password has been entered, you
can use the phone until you switch it off.
The following options are available:
Disable: you are not asked to enter the phone
password when you switch the phone on.
Enable: you are required to enter the phone
password when you switch the phone on.
100
Download from Www.Somanuals.com. All Manuals Search And Download.
Phone settings
Change password (Menu 5.5.4)
The Change password feature allows you to change
your current phone password to a new one. You
must enter the current password before you can
specify a new one.
The password is preset to “00000000” at the
factory. Once you have entered a new password,
you are asked to confirm it by entering it again.
Privacy (Menu 5.5.5)
Using this menu, you can lock your contents, such
as mulitmedia messages, your memo list, images,
and sounds. Once you have locked the contents,
you must enter the phone password to access the
associated menus.
To
Press the
select an item to lock Up or Down key. To lock all
of your contents, select All
.
place a check mark
Mark soft key.
remove a check mark Unmark soft key.
lock the marked items OK soft key.
When the phone asks for the phone password,
enter the password and press the OK soft key.
Note: The password is preset to “00000000” at the
factory, To change it, see the Change
password menu.
101
Download from Www.Somanuals.com. All Manuals Search And Download.
Phone settings
SIM lock (Menu 5.5.6)
When the SIM lock feature is enabled, your phone
only works with the current SIM. You must enter
the SIM lock code.
Once you have entered the lock code, you are
asked to confirm it by entering it again.
To unlock the SIM, you must enter the SIM lock
code.
FDN mode (Menu 5.5.7)
The FDN (Fixed dial number) mode, if supported by
your SIM card, allows you to restrict your outgoing
calls to a limited set of phone numbers.
The following options are available:
Disable: you can call any number.
Enable: you can only call phone numbers stored in
Phonebook. You must enter your PIN2.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu is not displayed.
To change your PIN2, refer to the Change PIN2
menu (Menu 5.5.8).
Change PIN2 (Menu 5.5.8)
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the
current PIN2 before you can specify a new one.
Once you have entered a new PIN2, you are asked
to confirm it by entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu is not displayed.
102
Download from Www.Somanuals.com. All Manuals Search And Download.
Phone settings
Extra settings (Menu 5.6)
You can turn the automatic redialling or answering
features on or off.
To turn a feature Press the
on
On soft key or
key.
A check mark displays next
to the option.
off
Off soft key or
key.
The check mark no longer
displays.
The following options are available:
Auto redial: when this option is checked, the
phone makes up to ten attempts to redial a phone
number after an unsuccessful call.
Note: The interval between two call attempts varies.
Anykey answer: when this option is checked, you
can answer an incoming call by pressing any key,
except the
key and the Reject soft key. To
reject the call, press the
key.
key or the Reject soft
When this option is unchecked, you can only press
the key or Accept soft key.
103
Download from Www.Somanuals.com. All Manuals Search And Download.
Phone settings
Short cut (Menu 5.7)
The navigation keys can be used as shortcut keys.
In idle mode, they allow you to access specific
menus directly.
To assign a shortcut to a key:
1. Select the key to be used as a shortcut key by
pressing the Up or Down key, and press the
Select soft key or Right key.
2. Select the menu to be assigned to the key by
pressing the Up or Down key.
Note: To deactivate a shortcut key, select the
None option.
3. Press the Select soft key to save the selection.
Reset settings (Menu 5.8)
You can easily reset your phone to its default
settings. To reset your phone:
1. Select the Reset settings menu.
2. Enter the 8-digit phone password and press the
OK soft key.
Note: The password is preset to “00000000.” To
change this password, see page 101.
104
Download from Www.Somanuals.com. All Manuals Search And Download.
Organiser
The Organiser feature enables you to:
• set an alarm so that the phone rings at a specific
time, such as to remind you of an appointment.
• view the calendar and organise your schedule.
• set the current date and time.
• define a list of things to do.
• use the phone as a calculator for basic
mathematical equations or currency exchange
operations.
• record voice memos.
Alarm (Menu 6.1)
This feature allows you to:
• set an alarm to sound at a specific time.
• set the phone to switch on automatically and
sound the alarm even if the phone is off.
The following options are available:
One time alarm: the alarm sounds only once and
is then deactivated.
Daily alarm: the alarm sounds every day at the
same time.
Morning call: the alarm sounds to wake you up in
the morning.
To set an alarm:
1. Choose the type of alarm to be set and press the
Select soft key.
105
Download from Www.Somanuals.com. All Manuals Search And Download.
Organiser
2. Enter the time for the alarm to sound.
Note: Your phone is preset to use 24-hour format.
To change the format, see page 109.
If you want to use the alarm options, press the
Options soft key. The following options are
available:
•
Remove alarm: deactivates the current
alarm.
•
Alarm tone: allows you to select the alarm
tone.
3. Press the OK soft key.
4. If you select Morning call in Step 1, choose the
repeat option, Monday to friday or Monday to
saturday, and press the Select soft key.
To stop the alarm when it sounds, press the Exit
soft key.
Remove alarm: deactivates all alarm settings.
Autopower: when this option is set to Enable, the
alarm sounds at the specified time, even if the
phone is off.
If the menu option is set to Disable and the phone
is off at the specified time, the alarm does not
sound.
Calendar (Menu 6.2)
With the Calendar feature, you can:
• consult the calendar to check your memos.
• write memos to keep track of your schedule.
• trigger an alarm, if necessary.
106
Download from Www.Somanuals.com. All Manuals Search And Download.
Organiser
Consulting the calendar
When you select the Calendar menu (Menu 6.2),
the calendar displays. The following options are
available when you press the Options soft key:
Search all: displays all memos, starting with the
oldest. To scroll through the memos, press the Left
or Right key.
Delete all: allows you to delete all of the memos.
You are asked to confirm your action.
Go to date: allows you to go to a specific date.
Exit: exits the Calendar feature and returns to idle
mode.
Writing a memo
You can make up to 30 memos for one day.
To write or edit a memo on a specific date:
1. Select a date on the calendar, using the
navigation keys.
Note: To skip to the previous or next month,
press the
or
key on the left side of
the phone.
2. Press the Select soft key.
An empty memo screen displays allowing you to
enter your memo.
3. Enter your memo and then press the OK soft
key.
Note: For further details about how to enter
characters, see page 38.
You are asked if you wish to set an alarm.
107
Download from Www.Somanuals.com. All Manuals Search And Download.
Organiser
4. If you want an alarm to sound on the chosen
day, press the Yes soft key.
Otherwise, press the No soft key. The memo is
saved.
5. If you pressed the Yes soft key, enter the time
for the alarm and press the OK soft key.
You can also select the melody for the alarm by
pressing the Melody soft key.
The colour of the date on the calendar changes to
purple to indicate that a memo exists on this day.
Viewing a memo
When you select a day for which a memo already
exists on the calendar, the latest memo for the day
displays.
If more than one memo is stored, press the Left or
Right key to scroll to the previous or next memo.
Press the New soft key to add a new memo to the
day.
You can use the following options by pressing the
Options soft key:
Edit: allows you to change the memo text.
Alarm: allows you to set an alarm to sound at a
specified time. If you set the alarm earlier, you can
change or delete it.
Delete: allows you to delete the memo.
Copy to: allows you to copy the memo to another
date.
Move to: allows you to change the date of the
memo.
108
Download from Www.Somanuals.com. All Manuals Search And Download.
Organiser
Time & Date (Menu 6.3)
This menu allows you to change the current time
and date displayed. You can also use this option to
find out what time it is in another part of the world.
The following options are available:
Set time: allows you to enter the current time. You
can choose the time format in the Time format
menu (Menu 6.3.4). See below.
Note: Before setting the time, you must specify your
time zone, in the World time menu (Menu
6.3.3).
Set date: allows you to enter the day, month, and
year.
World time: allows you to find out what time it is
in another part of the world, using the Left and
Right keys.
The screen shows the:
• city name.
• current date and time.
• time difference between the selected city and
your city if you have set the local time (see below
for further details) or GMT (by default).
To select your time zone:
1. Select the city corresponding to your time zone
by pressing the Left or Right key one or more
times.
The local date and time display.
2. Press the Set soft key.
Time format: allows you to change the time
format to 24 hours or 12 hours
.
109
Download from Www.Somanuals.com. All Manuals Search And Download.
Organiser
Calculator (Menu 6.4)
With this feature, you can use the phone as a
calculator. The calculator provides the basic
arithmetic functions: addition, subtraction,
multiplication, and division.
1. Enter the first number using the numeric keys.
Notes
• To delete mistakes or clear the display, press the
key.
:
C
• To include a decimal point or a bracket, press the
left soft key until the symbol you want displays.
2. Press the navigation keys until the required
arithmetic symbol appears:
+
(addition),
-
(subtraction), (multiplication),
/
(division).
3. Enter the second number.
4. To view the result, press the
key.
5. Repeat steps 1 to 4 as many times as required.
To do list (Menu 6.5)
This feature allows you to:
• enter a list of tasks to be done.
• assign a priority and a deadline to each task.
• sort the tasks by priority and status.
Creating the to do list
1. Press the New soft key.
110
Download from Www.Somanuals.com. All Manuals Search And Download.
Organiser
2. Enter the first task.
Note: For further details about how to enter
characters, see page 38.
3. Press the OK soft key.
4. Select high, normal, or low priority using the Up
or Down key, and press the Select soft key.
5. Enter your deadline and press the OK soft key.
If you do not want to set a deadline, press the
Skip soft key.
Editing the To do list
When you select the To do list menu (Menu 6.5),
the current contents display with the status mark
and priority:
for Low.
for High,
for Normal, and
To view the
details for a
specific task
➀
➁
➂
highlight the task.
press the View soft key.
scroll through the task using
the Up and Down keys, if
necessary.
To change the
status of a
➀
➁
highlight the task.
press the
key to mark the
specific task
task as completed as of the
current date and time.
or
➀
➁
➂
➃
highlight the task.
press the Options soft key.
select the Mark option.
select the appropriate status
(Done or Not done).
111
Download from Www.Somanuals.com. All Manuals Search And Download.
Organiser
To create a new
task
➀
➁
➂
press the Options soft key.
select the New option.
enter the text, priority, and/
or deadline for the task.
To edit an
existing
task
➀
➁
➂
➃
highlight the task.
press the Options soft key.
select the Edit option.
change the text, priority,
and/or deadline for the task,
as required.
To sort
existing
tasks by priority
or status
➀
➁
➂
press the Options soft key.
select the Sort option.
select the sort criterion
(
High
,
Low, Done, or Not
done).
To copy a task
➀
➁
➂
➃
highlight the task.
press the Options soft key.
select the Copy option.
change the text, priority,
and/or deadline for the task,
as required.
To copy a task to
the calendar
➀
➁
➂
highlight the task.
press the Options soft key.
select the Copy to calendar
option.
➃
change the text and deadline
for the task and set the
alarm, as required.
To delete a task
➀
➁
➂
highlight the task.
press the Options soft key.
select the Delete option.
112
Download from Www.Somanuals.com. All Manuals Search And Download.
Organiser
To delete all
tasks
➀
➁
➂
press the Options soft key.
select the Delete all option.
confirm the deletion by
pressing the OK soft key.
To exit the To do
list
➀
➁
press the Options soft key.
select the Exit option.
Voice memo (Menu 6.6)
You can record up to 5 voice memos of 30 seconds
each. After recording, you can send a voice memo
to other people using the multimedia message
service.
Voice record (Menu 6.6.1)
This menu allows you to record a new memo. When
you select this option, the display shows the 30-
second timer.
1. To start recording, press the Record soft key.
2. Record a memo by speaking into the
microphone.
3. When you press the Stop soft key or the
recording time expires, the following options
display:
•
•
Replay: plays back your memo.
Re-record: discards the memo and enables
you to record another one.
•
•
Save: allows you to save the memo.
Quit: cancels your recording and exits the
Voice record menu.
113
Download from Www.Somanuals.com. All Manuals Search And Download.
Organiser
4. To save the memo, choose Save from the options
and press the Select soft key.
5. Press the
C
key to clear the default name, if
necessary, and enter a name for the memo.
For further details about how to enter characters,
see page 38.
6. Press the OK soft key.
The memo is saved and then the display shows
the memo information.
7. Press the Options soft key to use the following
memo options:
•
Send: allows you to send the memo to other
people by using the MMS feature. Follow the
procedure on page 79.
•
•
Rename: allows you to change the memo’s
name.
Delete: deletes the memo.
8. To exit, press the
C
or
key.
Memo list (Menu 6.6.2)
This menu shows your voice memo list. Scroll to a
memo and press the Options soft key. The following
options are available:
Play: plays back the memo.
Send: allows you to send the memo to other people
by using the MMS feature. See page 79 for further
details about sending a message.
Rename: allows you to change the memo’s name.
Information: displays information about the memo,
such as name, date, time, and recording duration.
114
Download from Www.Somanuals.com. All Manuals Search And Download.
Organiser
Delete: deletes the memo.
Delete all (Menu 6.6.3)
In this menu, you can delete all of your voice
memos.
When the confirming message appears, press the
Yes soft key. To cancel the deletion, press the No
soft key.
Memory status (Menu 6.6.4)
In this menu, you can check the memory status for
voice memos. The display shows the total space,
including free and used space. It also displays the
number of the memos you have recorded and the
total number you can record.
Currency exchange (Menu 6.7)
Using this menu, you can make currency
conversions.
1. Enter the current exchange rate of your source
currency and press the OK soft key.
You can insert a decimal point by pressing
the
key.
2. Enter the amount to convert and press the OK
soft key.
The amount you entered and its equivalent
value display.
3. Press the
key to exit the currency convertor.
115
Download from Www.Somanuals.com. All Manuals Search And Download.
Network services
These menu functions are network services. Please
contact your service provider to check their
availability and subscribe to them, if you wish.
Call diverting (Menu 7.1)
This network service enables incoming calls to be
rerouted to the number that you specify.
Example: You may wish to divert your business calls
to a colleague while you are on holiday.
Call diverting can be set up in the following ways:
Divert always: all calls are diverted.
Busy: calls are diverted when you are already on
another call.
No reply: calls are diverted when you do not
answer the phone.
Unreachable: calls are diverted when you are not
in an area covered by your service provider.
Cancel all: all call diverting options are cancelled.
You can specify individual diverting options for each
of the following call types:
• Voice calls only
• Data calls only
116
Download from Www.Somanuals.com. All Manuals Search And Download.
Network services
To set your call diverting options:
1. Select the type of call diverting by pressing the
Up or Down key, and then press the Select soft
key.
2. Select the type of calls to be diverted by
pressing the Up or Down key, and then press the
Select soft key.
The current status displays. If the option has
already been set, the number to which the calls
are diverted displays.
3. To
Press the
activate call
diverting
Activate soft key.
Go to Step 4.
change the number Change soft key.
to be called
Go to Step 4.
deactivate call
diverting
Remove soft key.
4. Enter the number to which the calls are to be
diverted and press the OK soft key.
To enter an international code, press and hold
the
0
key until the
+
sign displays.
The phone sends your settings to the network
and the network’s acknowledgement displays.
You can deactivate all call diverting settings by
selecting the Cancel all option.
117
Download from Www.Somanuals.com. All Manuals Search And Download.
Network services
Call barring (Menu 7.2)
The call barring network service allows you to
restrict your calls.
Call barring can be set up in the following ways:
All outgoing: calls cannot be made.
International: international calls cannot be made.
International except to home: when abroad,
calls can be made only to numbers within the
current country and to your home country, which is
the country where your home network provider is
located.
All incoming: calls cannot be received.
Incoming while abroad: calls cannot be received
when you are using your phone outside of your
home service area.
Cancel all: all call barring settings are deactivated;
calls can be made and received normally.
You can specify individual barring options for each
of the following call types:
• Voice calls
• Data calls
To set your call barring options:
1. Select the type of call barring by pressing the Up
or Down key, and then press the Select soft
key.
2. Select the type of calls to be barred by pressing
the Up or Down key, and then press the Select
soft key.
118
Download from Www.Somanuals.com. All Manuals Search And Download.
Network services
3. Press the Activate soft key to confirm your
settings.
4. Enter the call barring password supplied by your
service provider.
The phone sends your settings to the network
and the network’s acknowledgement displays.
To deactivate specific call barring settings:
1. Select the call barring option to be deactivated.
2. Select the type of call to which this option
applies.
3. Press the Deactivate soft key.
4. Enter the call barring password supplied by your
service provider.
The phone sends your settings to the network
and the network’s acknowledgement displays.
You can also deactivate all call barring settings by
selecting the Cancel all option.
Change barring password: you can set and
change the call barring password obtained from
your service provider using this option. You must
enter the current password before you can specify a
new one.
Once you have entered a new password, you are
asked to confirm it by entering it again.
119
Download from Www.Somanuals.com. All Manuals Search And Download.
Network services
Call waiting (Menu 7.3)
This network service informs you when someone is
trying to reach you while you are on another call.
You can specify individual call waiting options for
each of the following call types:
• Voice calls
• Data calls
To set your call waiting options:
1. Select the type of calls to which you want to
apply the call waiting option by pressing the Up
or Down key, and then press the Select soft
key.
The screen informs you whether call waiting is
activated or deactivated.
2. You can activate or deactivate the call waiting
feature as necessary by using the Activate or
Deactivate soft key respectively.
To return to the previous screen, press the Exit
soft key.
You can also deactivate all call waiting settings by
selecting the Cancel all option.
120
Download from Www.Somanuals.com. All Manuals Search And Download.
Network services
Network selection (Menu 7.4)
The Network selection feature enables you to
manually select the network used when roaming
outside your home network’s service area, or to let
the phone automatically select the roaming
network.
Note: You can select a network other than your home
network only if there is a valid roaming
agreement between them.
To set whether to automatically or manually select
the network when roaming:
1. When Network selection displays, press the
Select soft key.
2. Press the Up or Down key until the appropriate
option highlights and then press the OK soft
key.
If you select Automatic, you are connected to
the first available network when roaming.
If you select Manual, the phone scans for
available networks. Go to Step 3.
3. Press the Up or Down key until the preferred
network highlights and then press the OK soft
key.
You are connected to that network.
121
Download from Www.Somanuals.com. All Manuals Search And Download.
Network services
Caller ID (Menu 7.5)
You can prevent your phone number from being
displayed on the phone of the person being called.
Note: Some networks do not allow the user to change
this setting.
The following options are available:
Default: the default setting provided by the
network is used.
Hide number: your number does not display on
the other person’s phone.
Send number: your number is sent each time you
make a call.
Closed user group (CUG) (Menu 7.6)
This network service allows incoming and outgoing
calls to be restricted to a selected user group. You
may be a member of up to ten user groups.
For details on how to create, activate, and use a
closed user group, contact your service provider.
Example: A company lends SIM cards to its
employees and wants to restrict outgoing
calls to members of the same team.
122
Download from Www.Somanuals.com. All Manuals Search And Download.
Network services
Activating a closed user group
If you select the Closed user group menu, you
can enter the CUG function. You can now access the
following options after pressing the Select soft key:
Index list: lets you list, add, or delete CUG index
numbers. The list of current CUG indexes appears.
Add a new CUG index as advised by your service
provider or delete a group.
To
Press the
scroll through the Up or Down key.
existing CUG
indexes
add a new CUG
index
Options soft key and select
the Add option. Enter the
index and press the OK soft
key.
delete a CUG
index
Options soft key and select
the Delete option.
activate a CUG
index
Options soft key and select
the Activate option.
123
Download from Www.Somanuals.com. All Manuals Search And Download.
Network services
Outside access: lets you enable or disable calls to
numbers other than those in the closed user group.
This feature depends on the nature of your CUG
subscription. Please check with your service
provider.
Default group: you may set a default CUG with
your service provider. If you have done so, you can
enable the Default group option on your phone.
When making a call, you are given the option of
using your default CUG, instead of selecting one
from the list.
Deactivate: deactivates the CUG function. This
menu appears only when the default group is
enabled or a CUG index is selected.
124
Download from Www.Somanuals.com. All Manuals Search And Download.
Funbox
The Funbox menu contains several amusement
options.
WAP browser (Menu 8.1)
Your phone is equipped with a WAP (Wireless
Application Protocol) browser to allow you to access
and navigate the Wireless Web via your phone.
Home (Menu 8.1.1)
Selecting this menu connects the phone to the
network and loads the homepage of the Wireless
Web service provider. You can also press the
in idle mode.
key
The content of the WAP Browser startup homepage
depends on your Wireless Web service provider. To
scroll through the screen, use the Up or Down keys.
Note: To access the startup homepage from any other
screen in the WAP browser, use the Home
option. For further details about the WAP
Browser menus, see page 127.
Exiting the WAP browser
To exit the browser at any time, simply press the
key.
125
Download from Www.Somanuals.com. All Manuals Search And Download.
Funbox
Navigating the WAP browse
r
To
Press the
scroll through and Up or Down key until the
select browser
items
symbol
points to the item,
and then press the Select
soft key to confirm the
selection.
select a numbered corresponding numeric key.
item
return to the
previous page
Back soft key or the
C
key.
return to the
key and select the Home
startup homepage option. For further details
about this option, see
page 127.
Entering text in the WAP browser
When you are prompted to enter text, the current
text entry mode is indicated on the screen.
The following modes are available:
Upper-case character
(A): allows you to enter
upper-case English characters.
Lower-case character ): allows you to enter
lower-case English characters.
T9 ): allows you to enter English characters by
pressing one key per letter. In this mode, you can
use the key to display alternative words. To change
the case, press the key.
Number ): allows you to enter numbers.
(a
(
0
(1
126
Download from Www.Somanuals.com. All Manuals Search And Download.
Funbox
To change
modes
press the
times.
key one or more
key.
To enter a
space
press the
To edit text
➀
set the cursor to the right of
the character(s) to be
corrected.
➁
➂
press the
enter the correct character(s).
C
key as required.
Selecting and using browser menu options
Various menu options are available when you are
using the WAP browser to navigate the Wireless
Web.
To access a menu option:
1. Press the
key.
A menu list displays.
2. Highlight a menu by pressing the Up or Down
key.
3. Select an option by pressing the Select soft key.
4. If necessary, select the secondary option using
the Up or Down keys, and press the Select soft
key to confirm.
Note: Menus may vary, depending on your version of
the WAP browser.
127
Download from Www.Somanuals.com. All Manuals Search And Download.
Funbox
The following options are available:
Reload: reloads the current page.
Home: takes you back at any time to the home
page of the Wireless Web service provider.
Goto URL: allows you to manually enter the URL
address of a Web page. After entering an address,
press the OK soft key to go there directly.
Show URL: displays the URL address of the Web
page to which you are currently connected. It also
enables you to set the current site as the startup
home page.
To
Press the
set the current
page as your
Option soft key, select the
Save to home option, and
startup home page press the Select soft key.
set a bookmark for Option soft key, select the
the current page
Save to bookmark option,
and press the Select soft
key.
cancel your setting Back soft key.
Edit home: allows you to change the startup home
page manually. Enter the URL and press the OK
soft key. For further details about entering text, see
page 126.
Clear cache: deletes the information stored in the
cache, which stores the most recently accessed
Web pages.
Inbox: allows you to read messages received from
the web server.
128
Download from Www.Somanuals.com. All Manuals Search And Download.
Funbox
Favorite (Menu 8.1.2)
This menu allows you to store the URL addresses of
up to ten of your favourite web sites. You can
access this menu directly by pressing and holding
the
key while using the WAP browser.
To store a URL address:
1. Select an empty location and press the Select
soft key.
2. Enter the address and press the Enter soft key.
For further details about how to enter
characters, see page 38.
Enter soft key.
After saving items, you can use the following
options by pressing the Select soft key:
Go to URL: quickly accesses that site.
Edit: allows you to edit the address.
Delete: deletes the address.
http:// (Menu 8.1.3)
This menu allows you to manually enter the URL
address of the Web site that you wish to access. You
can access this menu directly by pressing and
holding the
key in the WAP browser.
For further details about how to enter characters,
see page 38.
129
Download from Www.Somanuals.com. All Manuals Search And Download.
Funbox
Settings (Menu 8.1.4)
This menu allows you to set up five proxy servers
for the WAP browser. Contact your service provider
for details about your Settings options.
For each server, the following options are available:
Profile name: enter a name that you wish to
assign to the HTTP proxy server.
Homepage URL: set the address of your startup
homepage. When the default homepage displays,
you can delete it using the
own choice.
C
key and enter your
Security: select a data transmission mode. Choose
Secure to protect your data against unauthorised
access; otherwise, choose Non-secure
.
Bearer: select a bearer to be used for each type of
network address accessed: GPRS or Data
.
When the bearer is set to GPRS
:
IP address: enter the WAP gateway address
required to connect to the Internet.
User name: enter the User ID required to connect
to the GPRS network.
Password: enter the password required to connect
to the GPRS network.
APN: enter the access point name used for the
address of the GPRS network gateway.
When the bearer is set to Data
:
IP address: enter the WAP gateway address
required to connect to the Internet.
Login name: enter the PPP server login ID.
130
Download from Www.Somanuals.com. All Manuals Search And Download.
Funbox
Password: enter the PPP server password.
Dial-up number: enter the PPP server phone
number.
Data call type: select a data call type: Analogue
or ISDN
.
Note: The WAP browser settings may vary, depending
on the service provider. Contact your service
provider for further details.
Clear cache (Menu 8.1.5)
You can clear the information stored in the cache,
the phone’s temporary memory which stores the
most recently accessed Web pages.
Press the Yes soft key to confirm the deletion.
Otherwise, press the No soft key.
Push message (Menu 8.1.6)
In this menu, you can receive and access web
messages from the server.
The following options are available:
Inbox: allows you to read the messages received
from the web server.
Receive: allows you to set whether or not your
phone receives web messages.
Delete all: allows you to delete all of the web
messages you have received.
131
Download from Www.Somanuals.com. All Manuals Search And Download.
Funbox
Games (Menu 8.2)
You can download MIDlets (Java applications
running on mobile phones) from various sources
using the WAP browser and store them in your
phone.
When you access the Games menu, the list of the
default games appears. Once you have downloaded
games, they are added to the list.
Note: Java services may be unavailable depending
upon the service provider.
Launching a MIDlet
1. Scroll to the MIDlet you want on the Application
list and press the Launch soft key.
2. Start the MIDlet using the soft keys.
Viewing MIDlet information
1. Scroll to the MIDlet you want and press the Info
soft key.
The display shows information about the MIDlet,
such as file size, application version, and its
vendor.
2. To scroll to other MIDlet information, press
the Up or Down key.
3. If you want to delete the MIDlet, press the
Delete soft key and then press the Yes soft key
to confirm the deletion.
Note: When you select the default games from
the list, the Delete option is not available,
so that you cannot delete them.
132
Download from Www.Somanuals.com. All Manuals Search And Download.
Funbox
4. To exit and return to the Application screen,
press the Back soft key or the
C
key.
Changing the DNS settings
The DNS (Domain Name Server) is the server that
resolves the Java server domain name into the IP
address. The DNS setting is preset at the factory,
but sometimes you may need to change it at your
service provider’s instructions.
1. Scroll to Setting on the Applications list and
press the Select soft key.
2. Enter the primary address using the number
keypad and press the OK soft key.
3. Enter the secondary address and press the OK
soft key.
Entering text
To enter text while using a MIDlet, the following
input modes are available:
Upper-case character
(A): allows you to enter
upper-case English characters.
Lower-case character ): allows you to enter
lower-case English characters.
Number ): allows you to enter numbers.
(a
(1
Symbol: allows you to enter symbols. After
highlighting a symbol by pressing the navigation
keys, press the
T9 ): allows you to enter English characters by
pressing one key per letter. In this mode, you can
change the case by pressing the key.
To change the text input mode, press the
key to insert it.
(
0
key
until the appropriate indicator appears on the soft
key area of the display.
133
Download from Www.Somanuals.com. All Manuals Search And Download.
Funbox
Sounds (Menu 8.3)
In this menu, you can view the list of sounds
downloaded from the web server or received in
multimedia messages. You can set the downloaded
sounds as the current ring tone or send them to
other phones.
By pressing the Options soft key, you can use the
following options:
Rename: allows you to change the name of the
sound.
Delete: deletes the sound.
Set as ring tone: sets the sound as your ring tone.
Images (Menu 8.4)
In this menu, you can view the list of pictures
downloaded from the web server or received in
messages. You can set the downloaded pictures as
the current background image or send them to
other phones.
By pressing the Options soft key, you can use the
following options:
Rename: allows you to change the name of the
image.
Delete: deletes the image.
Set as wallpaper: sets the image as your
wallpaper.
134
Download from Www.Somanuals.com. All Manuals Search And Download.
Funbox
Delete all (Menu 8.5)
This menu allows you to delete all of the
downloaded items in the Games, Sounds, and
Images folders. You can also delete all of the items
at one time.
To
Press the
select a folder to
clear
Up or Down key. To delete
all of your items, select All
.
place a check mark
Mark soft key.
remove a check mark Unmark soft key.
delete the marked
items
Delete soft key.
When a confirming message displays, press the Yes
soft key to confirm.
Memory status (Menu 8.6)
You can check the memory status for games or
sounds and images. The display shows the total,
free, and used space, as well as the number of
objects you have downloaded.
135
Download from Www.Somanuals.com. All Manuals Search And Download.
Solving problems
Before calling for service, perform the following
simple checks for the problems listed. You may save
the time and expense of an unnecessary service
call.
When you switch your phone on, the
following messages may appear:
Insert SIM card
• Check that the SIM card is correctly installed.
Phone locked: enter password
• The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
Enter PIN
• You are using your phone for the first time. You
must enter the Personal Identification Number
(PIN) supplied with the SIM card.
• The PIN Check feature is enabled. Every time the
phone is switched on, the PIN has to be entered.
To disable this feature, use the PIN check menu
(Menu 5.5.1).
Enter PUK
• The PIN code was entered incorrectly three times
in succession and the phone is now blocked.
Enter the PUK supplied by your network operator.
137
Download from Www.Somanuals.com. All Manuals Search And Download.
Solving problems
“No service,” “Network failure,” or “Not
done” displays
• The network connection has been lost. You may
be in a weak signal area (in a tunnel or
surrounded by buildings). Move and try again.
• You are trying to access an option for which you
have not taken out a subscription with your
service provider. Contact the service provider for
further details.
You have entered a number but it was
not dialled
• Have you pressed the
key?
• Are you accessing the right cellular network?
• You may have set an outgoing call barring option.
Your correspondent cannot reach you
• Is your phone switched on (the
for more than one second)?
key pressed
• Are you accessing the right cellular network?
• You may have set an incoming call barring option.
Your correspondent cannot hear you
speaking
• Have you switched off the microphone?
• Are you holding the phone close enough to your
mouth? The microphone is located at the bottom
of the phone.
138
Download from Www.Somanuals.com. All Manuals Search And Download.
Solving problems
The phone starts beeping and
“**Warning** Low battery” flashes on
the display
• Your battery is insufficiently charged. Recharge
the battery.
The audio quality of the call is poor
• Check the signal strength indicator on the display
(
); the number of bars indicates the signal
strength from strong ( ) to weak ( ).
• Try moving the phone slightly or moving closer to
a window if you are in a building.
No number is dialled when you recall a
Phonebook entry
• Check that the number has been stored correctly
by using the Phonebook Search feature.
• Re-store the number, if necessary.
If the above guidelines do not help you to solve
the problem, take note of:
• the model and serial numbers of your phone
• your warranty details
• a clear description of the problem
Then contact your local dealer or Samsung after-
sales service.
139
Download from Www.Somanuals.com. All Manuals Search And Download.
Access codes
There are several access codes that are used by
your phone and its SIM card. These codes help
protect the phone against unauthorised use.
When any of the codes explained below are
requested, enter the appropriate code (displayed as
asterisks) and press the OK soft key. If you make a
mistake, press the
C
key one or more times until
the incorrect digit is cleared and then continue
entering the correct code.
The access codes, except for the PUK and PUK2
codes, can be changed using the Security menu
(Menu 5.5). See page 99 for further details.
Important! Avoid using access codes resembling
emergency numbers, such as 112, so
that you do not accidentally dial an
emergency number.
Phone password
The Phone lock feature uses the phone password to
protect your phone against unauthorised use. The
phone password is supplied with the phone and is
preset to “00000000” at the factory.
To
See
activate/deactivate the
Phone lock feature
page 100
(
Menu 5.5.3).
page 101
Menu 5.5.4).
change the phone
password
(
140
Download from Www.Somanuals.com. All Manuals Search And Download.
Access codes
PIN
The
Personal
Identification
Number or PIN (4 to
8 digits) protects your SIM card against
unauthorised use. It is usually supplied with the
SIM card.
If you enter an incorrect PIN three times in
succession, the code is disabled and cannot be used
until you re-enable it by entering the PUK (see
below).
To
See
activate/deactivate the
PIN check feature
page 99
(
Menu 5.5.1).
page 100
Menu 5.5.2).
change the PIN
(
PUK
The 8-digit PUK (
PIN
Unblocking
Key) is required to
change a disabled PIN. The PUK may be supplied
with the SIM card. If not, or if you have lost it,
contact your service provider.
To re-enable your PIN:
1. Enter the PUK and press the OK soft key.
2. Enter a new PIN of your choice and press the OK
soft key.
3. When the Confirm new PIN message displays,
enter the same code again and press the OK
soft key.
If you enter an incorrect PUK ten times in
succession, the SIM card becomes invalid. Contact
your service provider for a new card.
141
Download from Www.Somanuals.com. All Manuals Search And Download.
Access codes
PIN2
The PIN2 (4 to 8 digits), supplied with some SIM
cards, is required to access specific functions, such
as setting the maximum cost of a call. These
functions are available if supported by your SIM
card.
If you enter an incorrect PIN2 three times in
succession, the code is disabled and you cannot
access the functions until you re-enable it by
entering the PUK2.
To change the PIN2, see page 102 (Menu 5.5.8).
PUK2
The 8-digit PUK2 (
PIN
Unblocking
Key
2), supplied
with some SIM cards, is required to change a
disabled PIN2. If you lose the code, contact your
service provider.
To re-enable your PIN2:
1. Enter the PUK2 and press the OK soft key.
2. Enter a new PIN2 of your choice and press the
OK soft key.
3. When the Confirm PIN2 message displays,
enter the same code again and press the OK
soft key.
If you enter an incorrect PUK2 ten times in
succession, you will not be able to access the
functions requiring the PIN2. Contact your service
provider for a new card.
142
Download from Www.Somanuals.com. All Manuals Search And Download.
Access codes
Barring password
A 4-digit barring password is required when you use
the call barring function. You can obtain the
password from your service provider when you
subscribe to this function.
You can change this password in the Call barring
menu (Menu 7.2). See page 118 for further
details.
143
Download from Www.Somanuals.com. All Manuals Search And Download.
Health and safety
information
SAR certification information
This phone meets European Union (EU)
requirements concerning exposure to radio waves.
Your mobile phone is a radio transmitter and
receiver. It is designed and manufactured so as not
to exceed the limits for exposure to radio-frequency
(RF) energy, as recommended by the EU Council.
These limits are part of comprehensive guidelines
and establish permitted levels of RF energy for the
general population. The guidelines were developed
by independent scientific organisations through the
periodic and thorough evaluation of scientific
studies. The limits include a substantial safety
margin designed to ensure the safety of all persons,
regardless of age and health.
The exposure standard for mobile phones employs
a unit of measurement known as SAR (Specific
Absorption Rate). The SAR limit recommended by
the EU Council is 2.0W/kg.*
The highest SAR value for this model phone was
0.789 W/kg.
* The SAR limit for mobile phones used by the public is 2.0
watts/kilogram (W/kg) averaged over ten grams of body
tissue. The limit incorporates a substantial margin of safety to
give additional protection for the public and to account for any
variations in measurements. The SAR values may vary
depending on national reporting requirements and the
network band.
144
Download from Www.Somanuals.com. All Manuals Search And Download.
Health and safety information
SAR tests are conducted using standard operating
positions with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest
certified power level, the actual SAR level of the
phone while operating can be well below the
maximum value. This is because the phone is
designed to operate at multiple power levels so as
to use only the power required to reach the
network. In general, the closer you are to a base
station, the lower the power output of the phone.
Before a new model phone can be made available
for sale to the public, compliance with the European
R&TTE Directive must be shown. This directive
includes as one of its essential requirements the
protection of the health and safety of the user and
any other person.
Precautions when using batteries
• Never use any charger or battery that is damaged
in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base
station, it uses less power; talk and standby time
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
• Battery charging time depends on the remaining
battery charge and the type of battery and
charger used. The battery can be charged and
discharged hundreds of times, but it will gradually
wear out. When the operation time (talk time and
standby time) is noticeably shorter than normal,
it is time to buy a new battery.
145
Download from Www.Somanuals.com. All Manuals Search And Download.
Health and safety information
• If left unused, a fully charged battery will
discharge itself over time.
• Use only Samsung-approved batteries and
recharge your battery only with Samsung-
approved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave
the battery connected to a charger for more than
a week, since overcharging may shorten its life.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
• Do not leave the battery in hot or cold places,
such as in a car in summer or winter conditions,
as you will reduce the capacity and lifetime of the
battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery
may temporarily not work, even when the battery
is fully charged. Li-ion batteries are particularly
affected by temperatures below 0 °C (32 °F).
• Do not short-circuit the battery. Accidental short-
circuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between
the + and – terminals of the battery (metal strips
on the battery), for example when you carry a
spare battery in a pocket or bag. Short-circuiting
the terminals may damage the battery or the
object causing the short-circuiting.
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
146
Download from Www.Somanuals.com. All Manuals Search And Download.
Health and safety information
Road safety
Your wireless phone gives you the powerful ability
to communicate by voice, almost anywhere,
anytime. But an important responsibility
accompanies the benefits of wireless phones, one
that every user must uphold.
When driving a car, driving is your first
responsibility. When using your wireless phone
behind the wheel of a car, make sure that you are
following the special regulations of the given area or
country.
Operating environment
Remember to follow any special regulations in force
in any area and always switch off your phone
whenever it is forbidden to use it, or when it may
cause interference or danger.
When connecting the phone or any accessory to
another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible
products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation
of the equipment and for the safety of personnel, it
is recommended that the equipment should only be
used in the normal operating position (held to your
ear with the antenna pointing over your shoulder).
147
Download from Www.Somanuals.com. All Manuals Search And Download.
Health and safety information
Electronic devices
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against
the RF signals from your wireless phone. Consult
the manufacturer to discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be
maintained between a wireless phone and a
pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent
with the independent research and
recommendations of Wireless Technology Research.
Persons with pacemakers:
• Should always keep the phone more than 15 cm
(6 inches) from their pacemaker when the phone
is switched on
• Should not carry the phone in a breast pocket
• Should use the ear opposite the pacemaker to
minimise potential interference
If you have any reason to suspect that interference
is taking place, switch your phone off immediately.
Hearing aids
Some digital wireless phones may interfere with
some hearing aids. In the event of such
interference, you may wish to consult your hearing
aid manufacturer to discuss alternatives.
148
Download from Www.Somanuals.com. All Manuals Search And Download.
Health and safety information
Other medical devices
If you use any other personal medical devices,
consult the manufacturer of your device to
determine if it is adequately shielded from external
RF energy. Your physician may be able to assist you
in obtaining this information. Switch your phone off
in health care facilities when any regulations posted
in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that
could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted facilities
Switch off your phone in any facility where posted
notices require you to do so.
149
Download from Www.Somanuals.com. All Manuals Search And Download.
Health and safety information
Potentially explosive environments
Switch your phone off when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause
an explosion or fire resulting in bodily injury or even
death.
Users are advised to switch the phone off while at a
refuelling point (service station). Users are
reminded of the need to observe restrictions on the
use of radio equipment in fuel depots (fuel storage
and distribution areas), chemical plants or where
blasting operations are in progress.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include
below deck on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas,
such as propane or butane, areas where the air
contains chemicals or particles, such as grain, dust
or metal powders, and any other area where you
would normally be advised to turn off your vehicle
engine.
150
Download from Www.Somanuals.com. All Manuals Search And Download.
Health and safety information
Emergency calls
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well
as user-programmed functions, which cannot
guarantee connection in all conditions. Therefore,
you should never rely solely on any wireless phone
for essential communications (medical
emergencies, for example).
Remember, to make or receive any calls the phone
must be switched on and in a service area with
adequate signal strength. Emergency calls may not
be possible on all wireless phone networks or when
certain network services and/or phone features are
in use. Check with local service providers.
To make an emergency call, proceed as follows.
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present
location (for example, 112 or any other official
emergency number). Emergency numbers vary
by location.
3. Press the
key.
If certain features are in use (call barring, for
example), you may first need to deactivate those
features before you can make an emergency call.
Consult this document and your local cellular
service provider.
When making an emergency call, remember to give
all the necessary information as accurately as
possible. Remember that your phone may be the
only means of communication at the scene of an
accident; do not end the call until given permission
to do so.
151
Download from Www.Somanuals.com. All Manuals Search And Download.
Health and safety information
Other important safety information
• Only qualified personnel should service the phone
or install the phone in a vehicle. Faulty
installation or service may be dangerous and may
invalidate any warranty applicable to the device.
• Check regularly that all wireless phone equipment
in your vehicle is mounted and operating
properly.
• Do not store or carry flammable liquids, gases, or
explosive materials in the same compartment as
the phone, its parts, or accessories.
• For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including both installed or portable
wireless equipment in the area over the air bag or
in the air bag deployment area. If wireless
equipment is improperly installed and the air bag
inflates, serious injury could result.
• Switch your phone off before boarding an aircraft.
The use of wireless phones in aircraft may be
dangerous to the operation of the aircraft, and is
illegal.
• Failure to observe these instructions may lead to
the suspension or denial of telephone services to
the offender, or legal action, or both.
152
Download from Www.Somanuals.com. All Manuals Search And Download.
Health and safety information
Care and maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for
many years.
• Keep the phone and all its parts and accessories
out of the reach of small children.
• Keep the phone dry. Precipitation, humidity, and
liquids contain minerals that corrode electronic
circuits.
• Do not use the phone with a wet hand. Doing so
may cause an electric shock to you or damage to
the phone.
• Do not use or store the phone in dusty, dirty
areas, as its moving parts may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
• Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the
phone, which may damage the phone’s electronic
circuit boards.
• Do not drop, knock, or shake the phone. Rough
handling can break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents, or
strong detergents to clean the phone. Wipe it
with a soft cloth slightly dampened in a mild
soap-and-water solution.
153
Download from Www.Somanuals.com. All Manuals Search And Download.
Health and safety information
• Do not paint the phone. Paint can clog the
device’s moving parts and prevent proper
operation.
• Do not put the phone in or on heating devices,
such as a microwave oven, a stove, or a radiator.
The phone may explode when overheated.
• Use only the supplied or an approved
replacement antenna. Unauthorised antennas or
modified accessories may damage the phone and
violate regulations governing radio devices.
• If the phone, battery, charger, or any accessory is
not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
154
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
To help you understand the main technical terms
and abbreviations used in this booklet and take full
advantage of the features of your mobile phone,
here are a few definitions:
Call barring
Ability to restrict outgoing and incoming calls.
Call diverting
Ability to reroute calls to another number.
Call holding
Ability to put one call on standby while answering or
making another call; you can then switch between
the two calls, as required.
Call waiting
Informs you that you have an incoming call when
you are engaged on another call.
Caller line identification services (Caller ID)
Services allowing subscribers to view or block the
telephone numbers of callers.
EMS (Enhanced message service)
An adaptation of the Short Message Service (SMS)
that allows you to send and receive ring tones and
your service provider’s logo, as well as
combinations of simple media to and from EMS-
compliant handsets.
155
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Because EMS is based on SMS, it can use SMS
centres the same way that SMS does. EMS works on
all Global System for Mobile communications (GSM)
networks. EMS senders can use text, melodies,
pictures, sounds, and animated images to enhance
the expressive power of messages that are
otherwise limited by the display constraints of
mobile devices.
GPRS (General packet radio service)
New non-voice, value-added service that allows
information to be sent and received across a mobile
telephone network. GPRS provides continuous
connection to the Internet for mobile phone and
computer users. It is based on the Global System
for Mobile Communication (GSM) circuit-switched
cellular phone connections and the Short Message
Service (SMS).
GSM (Global system for mobile
communication)
International standard for cellular communication,
guaranteeing compatibility between the various
network operators. GSM covers most European
countries and many other parts of the world.
156
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Java
Programming language generating applications that
can run on all hardware platforms, whether small,
medium, or large, without modification. It has been
promoted for and geared heavily to the Web, both
for public Web sites and Intranets. When a Java
program runs from a Web page, it is called a Java
applet. When it is run on a mobile phone or pager, it
is called a MIDlet.
MMS (Multimedia message service)
A message service for the mobile environment,
standardized by the WAP Forum and the 3rd
Generation Partnership Program (3GPP). For phone
users, MMS is similar to Short Message Service
(SMS)--it provides automatic, immediate delivery of
user-created content from phone to phone. The
message addressing used is primarily phone
numbers, thus the traffic goes from phone to
phone. MMS also provides support for e-mail
addressing, so that messages can be sent by
e-mail. In addition to the text content of SMS, MMS
messages can contain still images, voice or audio
clips, and also video clips and presentation
information.
Multi-party calling
Ability to establish a conference call involving up to
five additional parties.
Phone password
Security code used to unlock the phone when you
have selected the option to lock it automatically
each time it switches on.
157
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
PIN (Personal identification number)
Security code that protects the phone against
unauthorised use. The PIN is supplied by the
service provider with the SIM card. It may be a four
to eight-digit number and can be changed, as
required.
PUK (PIN unblocking key)
Security code used to unlock the phone when an
incorrect PIN has been entered three times in
succession. The eight-digit number is supplied by
the service provider with the SIM card.
Roaming
Use of your phone when you are outside your home
network service area (when travelling for example).
SDN (Service dialling numbers)
Telephone numbers supplied by your network
provider and giving access to special services, such
as voice mail, directory inquiries, customer support,
and emergency services.
SIM (Subscriber identification module)
Card containing a chip with all the information
required to operate the phone (network and
memory information, as well as the subscriber’s
personal data). The SIM card fits into a small slot in
the back of the phone and is protected by the
battery.
158
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
SMS (Short message service)
Network service for sending and receiving
messages to and from another subscriber without
having to speak to the correspondent. The message
created or received can be displayed, received,
edited, or sent.
Soft keys
Two keys (
of which:
and
) on the phone, the purpose
• varies according to the function that you are
currently using.
• is indicated on the bottom line of the display just
above the corresponding key.
Voice mail
Computerised answering service that automatically
answers your calls when you are not available,
plays a greeting (optionally in your own voice), and
records a message.
159
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Caller ID • 122
Calls
A
Access codes • 140
Accessories •
Alarm • 105
Alert type • 92
Alphabet mode, text input •
42
answer • 28
bar • 118
divert • 116
end • 26
9
hold • 31
making • 25
redial • 26
Anykey answer • 103
Auto redial • 103
wait • 35
,
120
Card, SIM
inserting • 17
B
Background image • 96
Backlight time, set • 97
Backlight • 16
Backlight, auto • 98
Barring, calls • 118
Battery
•
73
Characters, enter • 38
Closed User Group (CUG) •
122
Conference call • 36
Connect tone • 95
Contrast, display • 97
Cost, calls • 90
charging • 19
low battery indicator •
20
remove • 17
removing • 19
D
Battery precautions • 145
Broadcast messages • 73
Browser, WAP • 125
Date, set • 109
Delivery reports, message •
71
Dialled calls • 88
Display
C
Calculator • 110
Calendar memos
copy • 108
icons • 14
main • 13
Divert, calls • 116
DTMF tones, send • 34
delete• 108
view • 108
write • 107
E
Call back, message • 65
Call costs • 90
Call numbers
dialled • 88
Earpiece volume • 27
Emergency calls • 151
EMS (Enhanced Message
Service) • 64
missed • 28 87
,
received • 88
Call records • 87
Call time • 89
Caller groups
edit • 59
Error tone • 95
F
FDN (Fixed Dial Number)
search • 58
mode • 102
160
Download from Www.Somanuals.com. All Manuals Search And Download.
Forward, multimedia
message • 77
Functions, select • 22
M
Memory status
downloaded items • 135
multimedia messages •
84
G
text messages • 72
Games • 132
Greeting message • 98
Menus
access • 45
list • 47
H
Message tone • 93
Messages
Hold, call • 31
cell broadcast • 73
greeting • 98
multimedia • 75
text • 64
I
Icons • 14
voice • 72
Inbox, messages
multimedia • 75
text • 64
Minute minder • 95
Missed calls • 28
Morning call • 105
Multimedia messages
,
Infrared, connect • 96
International calls • 25
Internet • 125
delete • 77
,
78
edit • 79
J
read • 75
,
78
set • 80
Java service • 132
Multimedia messages (MMS)
75
•
K
Multi-party calls • 36
Mute
Key volume • 27
Keypad tones
select • 92
send • 33
all sounds • 30
key tones • 33
microphone • 32
Keys
location • 10
shortcut • 104
N
Names
enter • 38
L
search/dial • 57
Network services • 116
Numbers, phone
search/dial • 57
store • 52
Language, select • 99
Last number, redial • 26
LCD
icons • 14
main • 13
Lock
O
phone• 100
SIM card • 101
Options, select • 22
Organiser • 105
Outbox, messages
161
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
multimedia • 78
S
Safety
text • 65
Own number • 98
information • 144
precautions •
Scheduler • 106
7
P
Security, calls • 99
Sent messages
multimedia • 78
text • 65
Silent mode • 30
SIM card
Password
call bar • 119
,
143
phone • 101
Phone
,
140
layout • 10
lock • 100
password • 140
switching on/off • 21
lock • 101
SMS (Short Message Service)
inbox • 64
Phonebook
copy • 56
delete • 55
edit • 55
,
61
outbox • 65
Soft keys, use • 21
Sounds, set • 91
Speed-dial • 60
Switch on/off
options • 55
search/dial • 57
speed-dial • 60
store • 52
microphone • 32
PIN
Switching on/off
change • 100
phone • 21
description • 141
Symbol, text input • 44
PIN2
change • 102
description • 142
T
Privacy • 101
PUK • 141
PUK2 • 142
T9 mode, text input • 40
Tasks, to do list
create • 110
edit • 111
Templates
R
multimedia • 83
text • 69
Text input mode • 39
Text message
Received calls • 88
Received messages
multimedia • 75
text • 64
delete • 64
,
66, 71
Redial
read • 64 65
,
automatically • 103
manually • 26
Reset • 104
send • 66
set • 70
Text, enter • 38
Time format • 109
Time, set • 109
To do list • 110
Tone
Ring tone • 91
Ring type • 92
Ring volume • 91
Roaming • 121
connect • 95
162
Download from Www.Somanuals.com. All Manuals Search And Download.
error • 95
keypad • 92
message • 93
ring • 91
Travel adapter • 19
U
User group • 122
V
Vibration • 92
Voice mail • 72
Voice memo
delete • 115
play • 114
record • 113
Voicemail server • 72
Volume, adjust
earpiece • 27
keypad tone • 27
ring • 91
W
Waiting call • 120
Wallpaper • 96
WAP browser
access • 125
cache, clear • 131
favorites • 129
World time • 109
163
Download from Www.Somanuals.com. All Manuals Search And Download.
164
Download from Www.Somanuals.com. All Manuals Search And Download.
166
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|