Samsung Cell Phone D 44867 User Guide

* Some of the contents of this manual may differ from your phone,

depending on the software installed or your service provider.

SAMSUNG ELECTRONICS

Printed in Korea

Code No.:GH68-06020A

English. 10/2005. Rev. 2.1

World Wide Web

http://www.samsungmobile.com

Download from Www.Somanuals.com. All Manuals Search And Download.

Use road safety at all times

Do not use a hand-held phone while driving. Park

the vehicle first.

Switch off the phone when refuelling

Do not use the phone at a refuelling point (service

station) or near fuels or chemicals.

Important

safety

Switch off in an aircraft

Wireless phones can cause interference. Using them

in an aircraft is both illegal and dangerous.

precautions

Switch off the phone near all medical

equipment

Failure to comply with the following

precautions may be dangerous or illegal.

Hospitals or health care facilities may be using

equipment that could be sensitive to external radio

frequency energy. Follow any regulations or rules in

force.

Download from Www.Somanuals.com. All Manuals Search And Download.

Interference

Keep your phone away from small children

All wireless phones may be subject to interference,

which could affect their performance.

Keep the phone and all its parts, including accessories,

out of the reach of small children.

Be aware of special regulations

Accessories and batteries

Meet any special regulations in force in any area and

always switch off your phone whenever it is forbidden

to use it, or when it may cause interference or danger.

Use only Samsung-approved accessories and

batteries. Use of any unauthorised accessories could

damage your phone and may be dangerous.

Water resistance

• The phone could explode if the battery is

replaced with an incorrect type.

• Dispose used batteries according to the

manufacturer’s instructions.

Your phone is not water-resistant. Keep it dry.

Sensible use

Use only in the normal position (held to the ear). Avoid

unnecessary contact with the antenna when the phone

is switched on.

Qualified service

Only qualified service personnel may repair your

phone.

Emergency call

For more detailed safety information, see "Health and

safety information" on page 87.

Key in the emergency number for your present

location, then press

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Camera and camcorder

Use the camera module on your

phone to take a photo or record a

video.

About this Guide

This User’s Guide provides you with condensed

information about how to use your phone. To quickly

learn the basics for your phone, please refer to “Get

started.”

In this guide, the following instruction icons appear:

Special

features of your phone

Indicates that you need to pay careful attention

to the subsequent information regarding safety or

phone features.

•

MP3 player

Play MP3 music files using your

phone as an MP3 player.

Indicates that you can get more information on

the referenced page.

ꢀ

•

Bluetooth

Indicates that you need to press the Navigation

keys to scroll to the specified option and then

select it.

→

Send photos, images, videos, and

other personal data, and connect

to other devices using free,

wireless Bluetooth technology.

Indicates a key on the phone. For example,

[

]

[

]

•

IrDA

Indicates a soft key, whose function is displayed

on the phone screen. For example, <Menu

Send and receive Phonebook and

Organiser data via an infrared port.

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Plug-in speaker

•

Multimedia Message Service (MMS)

Deliver MMS messages with a combination of

text, images, video, and audio.

Use the included external speaker

to talk without having to hold the

phone.

E-mail

•

Voice clarity

Deliver e-mails with images, video, and audio

attachments.

Use the voice clarity feature to increase the

volume and clarity of an incoming call, even in the

midst of a crowd.

•

Java

Enjoy Java™-based embedded

games and download new games.

•

Get Personal with photo caller

See who’s calling you when their

very own photo displays.

•

Organiser

Keep track of your daily, weekly,

and monthly schedule.

Name card

Create name cards with your

number and profile. Whenever

introducing yourself to others, use

this convenient electronic name

card.

•

Voice recorder

Record memos or sounds.

Download from Www.Somanuals.com. All Manuals Search And Download.

Play games.......................................................... 16

Browse WAP........................................................ 16

Use Phonebook .................................................... 17

Send messages.................................................... 18

View messages .................................................... 19

Use Bluetooth wireless.......................................... 20

Contents

Unpack

Make sure you have each item

Your phone

Enter text

Buttons, features, and locations

Get started

ABC, T9, Number, and Symbol modes

Call functions

First steps to operate your phone

Advanced calling features

Menu functions

Install and charge the phone ................................... 7

Power on or off...................................................... 8

Keys and display.................................................... 9

Access menu functions.......................................... 11

Customise your phone .......................................... 12

Make/answer calls................................................ 13

All menu options listed

Solve problems

Help and personal needs

Health and safety information

Step outside the phone

Begin with your camera, music, games, and other special

features

Index

Use camera......................................................... 14

Play MP3s ........................................................... 15

Download from Www.Somanuals.com. All Manuals Search And Download.

Overview of menu functions

To access Menu mode, press <Menu> from in idle mode.

1 Call records

ꢀp.28

3 Applications (continued)

6 Funbox

ꢀp.60

9 Settings

ꢀp.74

1 All calls

ꢀ

p.28

p.29

p.30

7 Convertor

8 Timer

9 Stopwatch

10 SIM-AT*

ꢀ

p.40

p.41

Images

Videos

Music

Sounds

ꢀ

p.60

p.61

p.62

1 Time & Date

2 Phone settings

3 Display settings

4 Sound settings

5 Network services

6 Connectivity

7 Security

ꢀ

p.74

p.75

p.76

p.77

p.78

p.80

p.83

p.84

p.85

2 Dialled calls

3 Received calls

4 Missed calls

5 Delete all

6 Call time

Memory status

4 Browser

ꢀp.42

7 Organiser

ꢀp.62

7 Call costs^*

1 Home

ꢀp.42

ꢀp.43

ꢀp.44

2 Bookmarks

3 Go to URL

4 Clear cache

5 Profile settings

6 Current proxy

1 Month view

2 Week view

3 Day view

ꢀp.63

ꢀp.65

ꢀp.66

ꢀp.67

8 Memory status

9 Reset settings

2 Phonebook

ꢀp.30

1 Contact list

2 Add new contact

3 Group

ꢀp.30

ꢀp.31

ꢀp.32

ꢀp.33

ꢀp.34

4 Schedule

* Shows only if supported by your

SIM card.

5 Anniversary

6 Miscellaneous

7 To do

8 Missed alarm events

9 Memo

4 Speed dial

5 Messages

ꢀp.45

5 My name card

6 Own number

7 Management

8 Service number

1 Short messages

2 Multimedia messages

3 Email

4 Push messages

5 Voice mail

6 Text template

7 Broadcast messages

8 Memory status

ꢀp.45

ꢀp.48

ꢀp.53

ꢀp.59

ꢀp.60

10 Memory status

3 Applications

ꢀp.34

8 Camera

ꢀp.67

1 Java world

2 MP3 Player

3 Voice recorder

4 World time

5 Alarm

ꢀp.34

ꢀp.36

ꢀp.38

ꢀp.39

ꢀp.40

1 Take a photo

2 Record video

3 Photos

4 My photos

5 Video clips

6 My video clips

ꢀp.67

ꢀp.70

ꢀp.72

ꢀp.73

ꢀp.74

6 Calculator

Download from Www.Somanuals.com. All Manuals Search And Download.

Unpack

Your phone

Make sure you have each item

Buttons, features, and locations

Camera

lens

Flash

Earpiece

Display

Phone

Travel Adapter

Navigation keys

(Up/Down/Left/

Right)

Headset

jack

WAP access/

Confirm key

Right soft key

Volume keys

Camera

key

Battery

User’s Manual

External

Speaker

Left soft key

Dial key

Power on/off/

Menu exit key

You can obtain various accessories from

your local Samsung dealer.

Cancel/Correct

key

The items supplied with your phone

and the accessories at your Samsung

dealer may vary, depending on your

country or service provider.

Alphanumeric

keys

IrDA port

Special

function keys

Microphone

Download from Www.Somanuals.com. All Manuals Search And Download.

Install the battery.

Plug the travel adapter

into the phone.

Get started

First steps to operate your phone

SIM card information

When you subscribe to a cellular network, you receive

a plug-in SIM (Subscriber Identity Module) card

loaded with your subscription details, such as your

PIN, and available optional services.

Install and charge the phone

Remove the battery.

Insert the SIM card.

Plug the adapter into a standard AC wall outlet.

When the phone is completely charged (the battery

icon stops blinking), unplug the adapter from the

power outlet.

If the phone is already

on, first turn it off by

Make sure that the gold-

coloured contacts on the

card face down into the

phone.

holding [

Download from Www.Somanuals.com. All Manuals Search And Download.

Get started

Remove the adapter from the phone.

Power on or off

Power on

1. Open the phone.

2. Press and hold

the phone.

[

]

to turn on

Do not turn on

the phone when

mobile phone

3. If necessary, enter the PIN and

press <OK

use is prohibited.

Power off

1. Open the phone.

2. Press and hold

Low battery indicator

[

When the battery is low:

•

a warning tone sounds,

Keypad lock

the battery low message displays, and

When you close the phone, the keypad lock feature

locks the exposed keys so that nothing will happen if

the keys are accidentally pressed.

the empty battery icon

blinks.

If the battery level becomes too low, the phone

automatically turns off. Recharge your battery.

To unlock the keypad, press and hold the left soft key

and press <OK>.

Download from Www.Somanuals.com. All Manuals Search And Download.

Keys and display

Key(s) Description

Enter numbers, letters, and some special

characters.

Perform the function indicated on the bottom

line of the display.

In Idle mode, hold [1] down to access your

voicemail.

In Idle mode, access menu options

Enter special characters.

directly.ꢀpage 75

Hold [

]

down to activate or deactivate

In Menu mode, scroll through the menu

options.

Quiet mode.

Adjusts the phone volume.

In Idle mode, launches the Wireless

Application Protocol (WAP) browser.

In Menu mode, selects the highlighted menu

option.

In Idle mode, with the phone open, adjusts

the keypad tone volume. With the phone

closed, hold down to turn on the backlight.

In Menu mode, scrolls through the menu

options.

(on the left)

Sends or answers a call.

In Idle mode, retrieves the last number

dialled, missed, or received.

In Idle mode, hold down to turn on the

camera.

In Camera mode, takes a photo or starts

recording a video.

(on the right)

Deletes characters from the display.

In Menu mode, returns to the previous menu

level.

Ends a call. Hold down to switch the phone

on and off.

In Menu mode, cancels input and returns the

phone to Idle mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Get started

Display

Layout

New e-mail received or being sent

One of the message Inboxes is full

Call diverting feature is active

Icons

(continued)

The display has the three areas.

Icons

displays various icons.

ꢀpage 78

IrDA port is active

ꢀ

page 83

Text and graphics

displays messages,

instructions, and

Bluetooth feature is active

information you enter.

ꢀpage 80

Synchronised with a PC

GPRS network

Soft key function

indicators

Menu Contacts

shows the current

functions assigned to the

two soft keys.

Home Zone, if you have

registered for the appropriate

service

Received signal strength

Icons

Office Zone, if you have

registered for the appropriate

service

Call in progress

Out of your service area; you

cannot send or receive calls

Set to vibrate call ringer

Alarm set

ꢀpage 77

New text message

New voicemail message

New multimedia message

Quiet mode is active

ꢀpage 77

Battery power level

Download from Www.Somanuals.com. All Manuals Search And Download.

Access menu functions

Select an

option

1. Press the appropriate soft key.

Use the soft

keys

The roles of the soft keys vary

depending on the function you are

using. The bottom line of the

2. Press the Navigation keys to

move to the next or previous

option.

display indicates their current role.

3. Press <Select> or [

] to

confirm the function displayed or

option highlighted.

Contacts

4. To exit, choose either of the

following methods:

•

Press <Back> or [

move up one level.

Press to return to Idle

mode.

C] to

•

[

]

Press the left soft

key to access

Menu mode.

Press the right soft

key to access

Contact list in the

Phonebook menu.

Use shortcuts Press the number key

corresponding to the option you

want.

Download from Www.Somanuals.com. All Manuals Search And Download.

Get started

Customise your phone

You can set a wallpaper for the idle

screen.

Idle mode

Wallpaper

1. In Idle mode, press <Menu

Display

1. In Idle mode, press <Menu

and select Settings

settings Language

2. Select a language.

→

Phone

language

and select Settings

settings

→

Display

→

Wallpaper

2. Select an image category.

1. In Idle mode, press <Menu

3. Press [Left] or [Right] to select

an image.

Call ringer

melody

and select Settings

settings

Ring tone

→

Sound

→

Incoming call

→

You can change the colour for the

display components, such as title

bars and highlight bars.

Menu mode

Skin colour

2. Press [Left] or [Right] to select

a ringer category.

1. In Idle mode, press <Menu

and select Settings Display

settings Skin

2. Select a colour pattern.

3. Press [Up] or [Down] to select a

ringer melody.

→

4. Press Save

You can switch the phone to Quite

mode to avoid disturbing other

people with your phone sounds.

Quiet mode

Press and hold

Download from Www.Somanuals.com. All Manuals Search And Download.

[

]

in Idle mode.

Make/answer calls

You can protect the phone against

unauthorised use with a phone

password.

Phone lock

1. Enter an area code and phone

Make a call

number.

1. In Idle mode, press <Menu

and select Settings

Security Change

password

2. Enter the default password,

2. Press [ ].

→

3. To end the call, press

[

→

1. When the phone is ringing,

press [ ].

Answer a call

“00000000” and press <OK>.

2. To end the call, press

[

3. Enter a new 4- to 8- digit

password and press <OK>.

Press [ / ].

4. Enter the new password again

Adjust the

volume during

a call

and press <OK>.

5. Select Phone lock

6. Select Enable

7. Enter the password and press

OK>.

Download from Www.Somanuals.com. All Manuals Search And Download.

Step outside the phone

Begin with your camera, music, games, and other special

features

1. In Idle mode, press and hold

] to turn on the camera.

Record a video

[

2. Press [1] to switch to Record

mode.

Use camera

3. Press [ ] to start recording.

4. Press [ ] to stop recording.

The video is saved

1. Open the phone.

Take a photo

2. In Idle mode, press and hold

automatically.

[

] to turn on the camera.

5. Press [C] to record another

3. Aim the lens at the subject and

adjust the image.

video.

4. Press [ ] to take a photo. The

photo is saved automatically.

1. In Idle mode, press [ ] and

select Video clips

Play a video

5. Press [C] to take another

2. Select the thumbnail image of

the video you want.

photo.

1. In Idle mode, press [ ] and

select Photos

2. Select the photo you want.

View a photo

Download from Www.Somanuals.com. All Manuals Search And Download.

Play MP3s

1. From the MP3 player screen,

Play MP3 music

press

[

Use these methods:

Copy MP3 files

to the phone

2. During playback, use the

following onscreen keys:

•

Download from the wireless

web page 42

ꢀ

•

pauses playback.

resumes.

goes back to the

•

Download from a computer

using Samsung PC Studio II

ꢀSamsung PC Studio II User’s

Guide

previous file.

skips to the next file.

changes

the repeat mode.

stops playback.

•

Receive via IrDA or Bluetooth

•

ꢀpage 80

Options

Back

1. In Idle mode, press <Menu

and select Applications

MP3 player

2. Press <Options> and select

Add to list Add all or Add a

file

•

Create a play

list

→

To select a key, press [Left] or

[Right], then press

[

To adjust the volume, use [ /

→

3. For Add a file, scroll to a file

and press <Add>. Repeat from

step 2.

Download from Www.Somanuals.com. All Manuals Search And Download.

Step outside the phone

Play games

1. Select NEW GAME > a game

Play ArchAngel

mode.

1. In Idle mode, press <Menu>

and select Applications

Java world Downloads

Forgotten Warrior Freekick

or Arch Angel

Select a game

2. Press <NEXT>, <Play>, and

then <Next> until the game

starts, or <Skip> to start the

game immediately.

→

2. Press any key once or twice to

launch the game.

Browse WAP

In Idle mode, press

[

1. Press <Play>.

Launch the

browser

Play Forgotten-

Warrior

2. Select StartGame

•

To scroll through browser items,

press [Up] or [Down].

To select an item, press <

To return to the previous page,

press <Back> or [ ].

To return to the home page,

hold down [ ].

Navigate the

web

1. Select Game

you want a team

2. Press

→

the game mode

Play Freekick

→

a player.

•

[

•

Download from Www.Somanuals.com. All Manuals Search And Download.

Use Phonebook

1. In Idle mode, press

Contacts>.

Find an entry

To the phone’s memory

Add an entry

2. Select an entry.

1. In Idle mode, enter a phone

3. Select a number and press [

]

number and press <Save>.

to dial, or <Options> to access

options.

2. Select Phone

→

a number type.

3. Specify the contact information:

Last name, First name, Mobile,

Home, Office, Fax, Other, E-

mail, Graphic ID, Alert, Group,

and Notes.

1. In Idle mode, press <Menu

and select Phonebook My

name card

Create and

send a name

card

→

2. Specify your contact

information.

4. Press

[

]

to save the entry.

To the SIM card

3. Press <Save> to save the

1. In Idle mode, enter a phone

name card.

number and press <Save>.

4. To send the name card to other

2. Select SIM

3. Enter a name.

4. Press to save the entry.

people, press <Options> and

select Send

→

via SMS

/MMS/

Email Bluetooth

/infrared.

[

]

Download from Www.Somanuals.com. All Manuals Search And Download.

Step outside the phone

Send messages

5. Add a media file.

6. Select Message

1. In Idle mode, press <Menu

Send a text

message (SMS)

and select Messages

messages Create

2. Enter the message text.

3. Press <Options> and select

→

Short

7. Enter the message text and

→

press

8. Press <Options> and select

Send

[

Send and save or Send only

4. Enter destination numbers.

5. Press <Options> and select

9. Enter destination numbers or

e-mail addresses.

10.Press <Options> and select

Send

1. In Idle mode, press <Menu

and select Messages

Multimedia messages

Create

2. Select Subject

3. Enter the message subject and

press

4. Select Picture & video or

Sound

Download from Www.Somanuals.com. All Manuals Search And Download.

Send an e-mail

Send a

and select Messages

Create

2. Select Subject

3. Enter the e-mail subject and

press

4. Select Message

5. Enter the e-mail text and press

→

multimedia

message

(MMS)

→

[

When a notification appears:

6. Select File Attach

View a

multimedia

message

1. Press <View>.

7. Add image, video, music, or

sound files.

2. Press <Options> and select

Retrieve. The message

displays.

8. Press <Options> and select

Send

9. Enter e-mail addresses.

From the Inbox:

10.Press <Options> and select

1. In Idle mode, press <Menu

and select Messages

Multimedia messages

Inbox

2. Select a message.

Send

→

View messages

When a notification appears:

View a text

message

Press <View>. The message

displays.

1. In Idle mode, press <Menu

View an e-mail

and select Messages

Inbox

2. Select Check new mail.

→

From the Inbox:

→

1. In Idle mode, press <Menu

and select Messages

messages Inbox

2. Select a message.

→

Short

3. Select an e-mail or header.

→

4. If you selected a header, press

Options> and select

Retrieve

Download from Www.Somanuals.com. All Manuals Search And Download.

Step outside the phone

Use Bluetooth wireless

1. Access an application,

Phonebook Funbox

Camera, or Organiser

Send data

Your phone is equipped with Bluetooth technology

which enables you to connect the phone wirelessly to

other Bluetooth devices and exchange data with them,

talk hands-free, or control the phone remotely.

2. Select the item you want to

send.

3. Press <Options> and select

In Idle mode, press <Menu> and

Turn on

Bluetooth

Send

→

via Bluetooth.

select Settings

→

Connectivity

→

Bluetooth Activation

→

4. Select a device.

5. If necessary, enter the

1. In Idle mode, press <Menu>

and select Settings

Connectivity Bluetooth

My devices Search new

device

2. Select a device.

Bluetooth PIN and press <OK>.

Search for and

pair with a

Bluetooth

device

→

To receive data via Bluetooth, your

phone’s Bluetooth feature must be

active.

Receive data

If necessary, press <Yes> to

confirm the reception.

3. Enter a Bluetooth PIN code or

the other device’s Bluetooth PIN

code, if it has one, and press

<OK>. When the owner of the

other device enters the same

code, the pairing is complete.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using ABC mode

Press the appropriate key until the character you want

appears on the screen.

Enter text

ABC, T9, Number, and Symbol modes

You can enter text for some features such as

messaging, Phonebook, or Organiser, using ABC

mode, T9 mode, Number mode, and Symbol mode.

Characters in order displayed

Key

Upper case

Lower case

’

Changing the text input mode

The text input mode indicator displays when the

cursor is in a text field.

Press the right soft key to change the input mode.

Example: Writing a text message

W X

ABC mode

T9 mode

Tips for using ABC mode

Number mode

Symbol mode

•

To enter the same letter twice or to enter a

different letter on the same key, wait for the cursor

to move to the right automatically or press [Right].

Then, enter the next letter.

Text input mode

Options

indicator

Download from Www.Somanuals.com. All Manuals Search And Download.

Enter text

•

Press

[

]

to insert a space.

3. When the word displays correctly, go to step 4.

Otherwise, press [ ] to display alternative word

choices for the keys that you have pressed.

For example, OF and ME use [ ] and [ ].

to insert a space and enter the next

•

to change case. Lower case (No

indicator), Initial capital ( ), and Capital lock (

are available.

)

•

Press [Left] or [Right] to move the cursor.

4. Press

word.

[

]

Press [

] to delete characters one by one. Press

and hold [C] to clear the display.

Tips for using T9 mode

•

Press [

automatically.

Press to change case. Lower case (No

indicator), Initial capital ( ), and Capital lock (

are available.

1] to enter periods or apostrophes

Using T9 mode

T9 is a predictive text input mode that allows you to

key in any character using single keystrokes.

•

[

]

)

Entering a word in T9 mode

•

Press [Left] or [Right] to move the cursor.

1. Press [

each key once for each letter.

For example, press [ ], [ ], [

enter HELLO in T9 mode.

2] to [9] to start entering a word. Press

Press [

and hold [

] to delete characters one by one. Press

C] to clear the display.

5], [5], and [6] to

Adding a new word to the T9 dictionary

T9 predicts the word that you are typing, and it

may change with each key that you press.

This feature may not be available for some languages.

1. Enter the word that you want to add.

2. Enter the whole word before editing or deleting

characters.

2. Press [0] to display alternative words for your key

presses. When there are no more alternative

words, Spell displays on the bottom line.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Press <Spell>.

Call functions

4. Enter the word you want using ABC mode and

press <OK>.

Advanced calling features

Using Number mode

Making a call

1. In Idle mode, enter the area code and phone

number.

Number mode enables you to enter numbers.

Press the keys corresponding to the digits you want.

2. Press [ ].

Using Symbol mode

Press [C] to clear the last digit or press and hold [C]

to clear the whole display. You can move the cursor

to edit an incorrect digit.

Symbol mode enables you to insert symbols.

Press

Making an international call

display more symbols

select a symbol

[Up] or [Down].

1. In Idle mode, press and hold

appears.

[

0]. The

character

the corresponding

number key.

2. Enter the country code, area code, and phone

number, then press [ ].

clear the symbol(s)

insert the symbol(s)

[

Redialling recent numbers

1. In Idle mode, press [ ] to display the list of

recent numbers.

OK>.

2. Scroll to the number you want and press [ ].

Download from Www.Somanuals.com. All Manuals Search And Download.

Call functions

Making a call from Phonebook

Tips for answering a call

•

When Anykey answer in the Extra settings

menu is active, you can press any key to answer a

Once you have stored a number in Phonebook, you

can dial the number by selecting it from

call, except for [ ] and <Reject>.

ꢀp. 76

Phonebook.ꢀp. 30

•

Press <Reject> or [ ] to reject a call.

You can also use the speed dial feature to assign your

most frequently called numbers to specific number

Press and hold [ / ] to mute the ringer.

keys.

ꢀp. 32

Viewing missed calls

Dialling a number from the SIM card

If you have missed calls, the screen displays how

many calls you have missed.

1. In Idle mode, enter the location number for the

phone number you want and press [ ].

1. Press <View>.

2. Press [Left] or [Right] to scroll through other

numbers.

2. If necessary, scroll through the missed calls.

3. Press [ ] to dial the number you want.

3. Press <Dial> or [ ] to dial the number you want.

Ending a call

Using the headset

Close the phone or press [ ].

Use the headset to make or answer calls without

holding the phone.

Answering a call

When you receive an incoming call, the phone rings

and displays the incoming call image.

Connect the headset to the jack on the right side of

the phone.

Press [ ] or <Accept> to answer the call.

Download from Www.Somanuals.com. All Manuals Search And Download.

The buttons on the headset work as listed below:

Options during a call

Press

You can access a number of functions during a call.

redial the last call

answer a call

end a call

the button twice.

and hold the button.

Adjusting the volume during a call

Use [ / ] to adjust the earpiece volume during a call.

Press [ ] to increase the volume level and [ ] to

decrease the volume level.

Using the external speaker

Use the external speaker that came with your phone

to talk and listen with the phone a short distance

away. First, you must plug the speaker into the phone.

Placing a call on hold/Retrieving

Press <Hold> or <Retrieve> to place the call on hold

or retrieve the call.

Making a second call

You can make another call if your network supports it.

1. Press <Hold> to put the call on hold.

2. Make the second call in the normal way.

3. Press <Swap> to switch between the calls.

4. Press <Options> and select End held call to end

1. During a call, press [

] to listen and talk to the

icon appears.

the call on hold.

other person hands-free. The

5. To end the current call, press [ ].

2. Press [

The

] again to return to normal phone mode.

icon appears.

Download from Www.Somanuals.com. All Manuals Search And Download.

Call functions

Answering a second call

Using the voice clarity feature

You can answer an incoming call while already on the

phone, if your network supports it and you have

This feature removes extraneous noise and increases

call quality so that the person with whom you are

speaking can hear you clearly even if you are in a

noisy place.

activated the call waiting feature.ꢀp. 79

1. Press [ ] to answer the call. The first call is

automatically put on hold.

Press <Options> and select Voice clarity on or

Voice clarity off

2. Press <Swap> to switch between the calls.

3. Press <Options> and select End held call to end

Switching off the microphone (Mute mode)

the call on hold.

You can temporarily switch off your phone’s

microphone so that the person on the phone cannot

hear you.

4. To end the current call, press [ ].

Using a Bluetooth headset

Press <Options> and select Mute or Unmute

Use an optional Bluetooth headset to talk on the

phone without holding the phone to your ear. To use

this feature, you first need to register your headset

Muting or sending key tones

You can turn the key tones off or on.

and connect it to the phone.

Press <Options> and select Switch to headset or

Switch to phone

ꢀp. 80

Press <Options> and select Mute keys or Send

keys

To communicate with answering machines or

computerised telephone systems, Send keys must

be selected.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using Phonebook

Using SIM services

You can access the Phonebook menu to locate or

The SIM service menu is available if you use a SIM

card in your phone. A SIM card provides services such

as news, weather, sports, entertainment, and location

services.

store entries.ꢀp. 30

Press <Options> and select Phonebook

Sending a sequence of DTMF tones

Dual tone multi-frequency (DTMF) tones are the tones

used in phones for tone dialling.

For details, see your SIM card instructions or contact

your service provider.

Making a multi-party call

Use this feature to allow as many as six people to join

a multi-party call, or conference call.

You can send DTMF tones as a group after entering the

entire number you need to send or retrieving a

number from Phonebook. This feature is helpful for

entering a password or an account number when you

call an automated system, like a banking service.

Your service provider must support multi-party calls

for you to use this feature.

1. When connected with a teleservice system, press

Setting up a multi-party call

1. Call the first participant.

Options> and select Send DTMF

2. Enter the number you need to send and press

OK>.

2. Call the second participant. The first call is

automatically put on hold.

3. Press <Options> and select Join. The first

Using the message service

You can access the Messages menu to read an

incoming message and send a new message.

participant is added to the multi-party call.

4. If desired, call another person or answer an

incoming call.

ꢀp. 45

Press <Options> and select Message

Download from Www.Somanuals.com. All Manuals Search And Download.

5. Press <Options> and select Join

Menu functions

6. Repeat steps 4 and 5 as desired.

All menu options listed

Having a private conversation with one

participant

Call records (Menu 1)

1. Press <Options> and select Split

Use this menu to view the calls you have dialled,

received, or missed, the length of your calls, and the

cost of your calls.

2. Select a name or number from the participant list.

You can talk privately with that person, while the

other participants converse with each other.

To access this menu, press <Menu> in Idle mode and

3. To return to the multi-party call, press <Options

select Call records

and select Join

Dropping one participant

1. Press <Options> and select Remove

All calls (Menu 1.1)

This menu displays the 20 most recent calls dialled,

received, or missed.

2. Select a name or number from the participant list.

The participant is dropped from the call, but the

call continues with the other parties.

Accessing a call record

1. Press [Left] or [Right] to select a call type.

2. Press [Up] or [Down] to scroll through the call list.

3. Close the phone or press [ ] to end the multi-

party call.

3. Press [ ] to dial a number, or [

details of a call.

] to view the

Download from Www.Somanuals.com. All Manuals Search And Download.

Using call record options

Missed calls (Menu 1.4)

While viewing the call list, press <Options> to access

the following options:

This menu displays the 20 most recently received calls

that you did not answer.

•

Details: view the details of the selected call.

Call back: dial the number.

Delete all (Menu 1.5)

Use this menu to delete all of the records in each call

type.

Paste: save the number in Phonebook.

Send message: send an SMS or MMS message.

Delete: delete the selected call record.

1. Press [

] to check the call type(s) to clear.

2. Press <Delete>.

Delete all: delete all dialled, received, and missed

call records.

3. Press <Yes> to confirm the deletion.

Call time (Menu 1.6)

Dialled calls (Menu 1.2)

This menu displays the time log for calls made and

received. The actual time invoiced by your service

provider will vary.

This menu displays the 20 most recent calls you have

dialled.

Received calls (Menu 1.3)

•

Last call time: check the length of your last call.

This menu displays the 20 most recent calls you have

received.

Total sent: check the total length of all the calls

you have dialled.

•

Total received: check the total length of all the

you have calls received.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

•

Reset timers: reset the call timers. You need to

enter the phone password.

•

Price/Unit: set the price per unit that is applied

when the cost of your calls is calculated. You need

to enter your PIN2.

The password is preset to 00000000. You can

change this password.ꢀp. 84

Phonebook (Menu 2)

Call costs (Menu 1.7)

You can store phone numbers on your SIM card and in

your phone’s memory. The SIM card and phone’s

memory are physically separate, but they are used as

a single entity called Phonebook.

This network feature displays the cost of calls. This

menu is available only if your SIM card supports this

feature. Note that this is not intended to be used for

billing purposes.

To access this menu, press <Menu> in Idle mode and

select Phonebook

•

Last call cost: check the cost of your last call.

Total cost: check the total cost of all of your calls.

If the total cost exceeds the maximum cost set in

Set max cost, you must reset the counter before

you can make another call.

Contact list (Menu 2.1)

Use this menu to search for numbers in Phonebook.

Press <Contacts> in Idle mode to quickly access

this menu.

•

Max cost: check the maximum cost limit set in

Set max cost

Finding an entry

1. Enter the first few letters of the name that you

want to find.

Reset counters: reset the cost counters. You

need to enter your PIN2.

Set max cost: set the maximum cost authorised

for your calls. You need to enter your PIN2.

2. Select the name you want from the list.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Press [ ] to dial the number, or <Options> to

•

Last name

Mobile Home

number in any category.

First name: assign a name.

access Phonebook options.

Office Fax Other: add a

Using Phonebook options

•

Email: assign an e-mail address.

While viewing a contact in Phonebook, press

Graphic ID: assign an image as a caller ID

image to alert you to a call from the number.

Alert: assign a unique ringer melody to alert

you to a call from the number.

Group: assign the number to a caller group.

Notes: add a memo about the person.

<Options> to access the following options:

•

Edit: edit the contact information.

•

Send message: send an SMS, MMS, or e-mail

message.

•

Copy: copy the number to the phone’s memory or

SIM card.

3. Press [

] to save the contact.

Send: send the contact via SMS, MMS, e-mail,

Bluetooth, or infrared port.

Storing a number on the SIM card

1. Select SIM and enter a name.

Delete: delete the contact.

2. Press [Down] and enter a phone number.

Add new contact (Menu 2.2)

3. If necessary, press [Down] and change the location

number.

Use this menu to add a new contact to Phonebook.

4. Press [

] to save the contact.

Storing a number in the phone’s memory

1. Select Phone

2. Press [Down] and change the settings or enter

information about the contact.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

•

View: display the members of the selected group.

Add: add a new group.

Group (Menu 2.3)

Use this menu to organise your contacts in caller

groups.

Edit: change the properties of the selected group.

Delete: delete the group, but the members of the

group are not deleted from Phonebook.

Creating a new caller group

1. Press <Options> and select Add

2. Enter a name for your group.

Speed dial (Menu 2.4)

3. Select the graphic ID line and select an image.

4. Select the alert line and select a melody.

5. Press <Save> to save the group.

Use this menu to assign speed dial numbers (2 to 9)

for eight of your most frequently called numbers.

Assigning speed dial entries

Adding members to a caller group

1. Select a group.

1. Select a key location from

for your voice mail server.

9. Key

is reserved

2. Press [

] to open the Contact list screen.

2. Select the contact you want from the contact list.

3. Select the contact you want to add to the group.

Managing speed dial entries

4. To add more members, press <Options> and

While viewing the Speed dial screen, press

select Add

→

a contact.

<Options> to access the following options:

5. Repeat step 4 as desired.

•

Add: assign a number to an unassigned key.

Managing caller groups

•

Change: assign a different number to an assigned

key.

From the group list, press <Options> to access the

following options:

•

Remove: clear all speed dial settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

Dialling speed dial entries

Own number (Menu 2.6)

Press and hold the appropriate key in Idle mode.

Use this feature to check your phone numbers, or to

assign a name to each of the numbers.

My name card (Menu 2.5)

Changes made here do not affect the actual subscriber

numbers on your SIM card.

Use this menu to create a name card and send it to

other people.

Management (Menu 2.7)

Saving your name card

Use this menu to manage Phonebook.

The procedure for creating your name card is the

same as the one for saving a number in the phone’s

•

Default saving: select a default memory location

memory.ꢀp. 31

to save contacts.

If you select Ask on saving, the phone will ask

you to select a memory location when saving a

number.

Using name card options

After saving your name card, press <Options> to

access the following options:

•

Copy all to phone: copy all of the contacts stored

on the SIM card to the phone’s memory.

•

Edit: edit the name card.

Send: send the name card via SMS, MMS, e-mail,

Bluetooth, or infrared port.

Delete all: delete all of the contacts from your

phone’s memory, your SIM card, or both.

•

Exchange name card: exchange the name card

with another person’s name card via the Bluetooth

feature.

1. Press [

] to check the location(s) to clear.

2. Press <Delete>.

3. Press <Yes> to confirm the deletion.

Delete: delete the name card.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

4. Enter the phone password and press <OK>.

Java world (Menu 3.1)

The password is preset to 00000000. You can

Use this menu to access and play Java games and to

change the network settings required for accessing

Java services.

change this password.ꢀp. 84

•

Memory status: display the number of contacts

you have stored in Phonebook.

Using Java game options

From the Java world screen, select Downloads and

press <Options> to access the following options:

Service number (Menu 2.8)

This menu is available if your SIM card supports

Service Dialling Numbers (SDN). Use this menu to

view the list of SDNs assigned by your service

provider, including emergency numbers, directory

enquiries, and voice mail numbers.

•

Launch: launch the selected MIDlet.

Application Settings: set a game to be continued

when a call comes in or an alarm sounds during

the game. You can also set the phone to exchange

game information with the network while playing

an online game or when you need to connect to

the Internet.

Scroll to the number you want and press <Dial> or

[

•

Delete: delete the MIDlet.

Applications (Menu 3)

Properties: view the MIDlet properties.

Use this menu to play Java games, to play MP3 music

files, to record a voice memo, to set time zones and

alarms, or to use the phone as a calculator, timer, or

stopwatch.

Playing Forgotten Warrior

1. From the Java world menu, select Downloads

→

Forgotten Warrior

2. Press any key twice.

To access this menu, press <Menu> in Idle mode and

3. Press <PLAY>.

select Applications

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Select StartGame

5. Press <Next> until the game starts, or <Skip> to

start the game immediately.

5. Press <OK> to start a game.

During a game, press <OPTIONS> to access game

options.

During a game, press <OPTIONS> to access game

options.

Changing Java settings

Playing Freekick

You can change the settings for accessing Java

services.

1. From the Java world menu, select Downloads

Freekick

2. Press any key.

3. Select Game

team a player.

4. Press [ ] to start a game.

→

1. From the Java world menu, select Settings

2. Change the following settings:

→

the game mode you want

→

•

APN: enter the access point name.

Password: enter the password.

Proxy: select whether or not you use a proxy

server to access network services. Depending

on this setting, options in Proxy settings vary.

Proxy settings: provide you with the following

options:

During a game, press [ ] to access game options.

Playing Arch Angel

1. From the Java world menu, select Downloads

Arch Angel

→

•

2. Press any key.

When the proxy is set to Enable

3. Select NEW GAME

→

a game mode.

IP address: enter the HTTP proxy address.

4. Press <NEXT> and then <Play>.

Port: enter the port number.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

When the proxy is set to Disable

Creating a play list

DNS1: Enter the primary DNS address.

DNS2: Enter the secondary DNS address.

Checking memory status

You can view the amount of total and used memory for

Java games.

Add the MP3 files to the play list so you can play them.

1. From the MP3 player screen, press <Options

and select Add to list

2. Select either of the following options:

•

Add all: add all of the files in the phone’s

memory to the play list.

From the Java world menu, select Memory status

•

Add a file: add one file to the play list.

MP3 Player (Menu 3.2)

3. If you selected Add a file, scroll to a file and press

Add>. Repeat from step 1.

Use this menu to enjoy music. First, you need to save

MP3 files in your phone’s memory.

4. Press <Back> to go back to the MP3 player

Downloading or receiving MP3 music files

screen.

Use these methods to save MP3 files to your phone:

Playing MP3 files

•

Download from the wireless web

ꢀp. 42

From the MP3 player screen, press [

During playback:

Download from a computer using the Samsung PC

Studio II programmeꢀSamsung PC Studio II

•

Use the following buttons on the display:

User’s Guide

•

Via an active IrDA or Bluetooth connection

p. 80

The downloaded or received files are stored in the

Music folder. p. 61

Buttons

Function

Pauses

ꢀ

Resumes

ꢀ

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Settings: change the default settings for playing

MP3 files.

Buttons

Function

Stops

Repeat: select a repeat mode.

Shuffle: select a playing order.

Volume: select a volume level.

Returns to the previous file

Skips to the next file

Changes the repeat mode

Lock volume key: lock [ / ] so that you can

prevent an accidental press of the keys from

affecting playback.

To select a button, press [Left] or [Right] to

highlight it and press [ ].

Equalizer value: select an equalizer setting.

•

Press [ / ] to adjust the volume.

•

Properties: view the properties of the file.

Press <Stop> to stop playback.

Changing the play list

Using MP3 file options

1. From the MP3 player screen, press <Options

and select Open play list to access the play list.

From the MP3 player screen, press <Options> to

access the following options:

2. Press <Options> to access the following options:

•

Play/Pause: begin/pause playback.

•

Play: play the currently selected file.

Add to list: add files to the play list.

Move list: move the selected file to the

position you want within the play list.

Remove: remove the file from the play list.

Remove all: remove all files from the play list.

Send: send the currently selected file via e-mail,

Bluetooth, or infrared port.

•

Open play list: go to the play list.

•

Set as: set the file as your ring tone or as a caller

alert melody for a Phonebook entry.

•

Delete: delete the file.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

Playing a voice memo

Voice recorder (Menu 3.3)

1. From the Voice record screen, press <Options

Use this menu to record voice memos. A voice memo

can be up to one hour long.

and select Go to voice list

2. Select a voice memo. The memo plays.

During playback:

Recording a voice memo

1. Press [

] to start recording.

•

Use the following buttons on the display.

2. Speak into the microphone.

Buttons

Function

Pauses

•

Select

to pause the recording.

to resume the recording.

3. When you finish, press <Stop> or select

. The

Resumes

Stops

voice memo is automatically saved.

4. Press <Options> to access the following options:

•

Play: play back your voice memo.

Send: send the voice memo via MMS, e-mail,

Bluetooth, or infrared port.

Rename: change the name of the voice memo.

Delete: delete the voice memo.

Protection: protect the voice memo from

being deleted.

To select a button, press [Left] or [Right] to

highlight it and press [ ].

•

Press [ / ] to adjust the volume.

•

Press <Stop> to stop playback.

Using voice memo options

From the Voice record screen, press <Options> to

access the following options:

•

Properties: view the properties of the voice

mail.

•

Record: record a new voice memo.

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Settings: change the default settings for

recording a voice memo.

Viewing and setting a foreign time zone

1. From the world map, press [Down].

Recording time: select a recording time.

2. Press [Left] or [Right] to select the foreign time

zone you want to view.

Volume: select a volume level.

3. Press [

] to save the time zone.

Default name: change the default prefix of the

voice memo.

Applying Daylight Savings Time

1. From the world map, press <Options> and select

Equalizer value: select an equalizer setting.

Go to voice list: go to the list of voice memos you

have recorded.

Set daylight saving time

2. Press [ ] to check the time zone(s) you want.

3. Press <Save>.

World time (Menu 3.4)

Use this menu to set your local time zone and find out

what time it is in another part of the world.

Alarm (Menu 3.5)

Use this menu to set alarms to ring at a specific time.

Setting your local time zone

Setting an alarm

1. Select the type of alarm.

1. From the world map, press [Left] or [Right] to

select the city that corresponds to your home time

zone. As the time line moves, the time and date of

the given zone display.

2. Press [Left] or [Right] to select On on the Alarm

line and press [Down].

3. Enter the time for the alarm to sound and press

[Down].

2. Press [

] to save the time zone.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

4. Select AM or PM in 12-hour time format.

Calculator (Menu 3.6)

Your phone is preset to a 24-hour format. You

Use this menu to perform basic arithmetic functions

such as addition, subtraction, multiplication, and

division.

can change the time format.ꢀp. 74

5. Select the Alarm day line.

1. Enter the first number.

6. Press [

] to check the day(s) for the alarm.

Press [ ] to insert a decimal point.

2. Press [ ] to access the math function you want.

3. Enter the second number.

7. Press <OK>.

8. Select the Alarm tone line and select an alarm

melody.

4. Press <Equal> to view the result.

9. Press <Save> and then <Yes>.

Stopping an alarm

Convertor (Menu 3.7)

When the alarm sounds, choose either of the following

options to stop the alarm:

Use this menu for common conversions, such as

currency and temperature.

•

Press <Confirm>.

1. Select the convertor type you want.

Press <Snooze> or any key to stop the alarm for

5 minutes. You can do this a maximum of 5 times.

2. Press [Left] or [Right] to select the original unit

and press [Down].

Setting the alarm to ring even if the phone is

off

3. Enter the value to be converted and press [Down].

•

Press [ ] to insert a decimal point.

Press [ ] to change the temperature to above

zero (+) or below zero (-).

From the Alarm screen, select Auto power

→

On.

If the phone is off when it is time for the alarm to ring,

the phone switches on and sounds the alarm.

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Press [Left] or [Right] to select the unit you want

to convert to.

Stopwatch (Menu 3.9)

Use this menu to measure elapsed time. The precision

of the stopwatch is one one-hundredth of a second.

The maximum measurement time is 10 hours.

The equivalent value for the amount you entered

displays.

1. Press [

2. Press [

] to start the timer.

Timer (Menu 3.8)

] to check an interval. You can repeat

Use this menu to set a period of time for the phone to

count down. The phone will sound an alarm when the

specified period of time has expired.

this step for a total of 4 intervals.

SIM-AT (Menu 3.10)

Starting the timer

1. Press <Set>.

This menu is available if you use a SIM-AT card that

provides additional services, such as news, weather,

sports, entertainment, and location services. Available

services may vary, depending on your service

provider’s plans.

2. Enter the length of time you want to count down.

3. Press [

] to start counting down.

Stopping the timer

For details, see your SIM card instructions or contact

your service provider.

•

Press any key to stop the timer when it rings.

Press [ ] on the Timer screen to stop the timer

before it rings.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

Selecting and using browser menu options

1. Press <Menu> and select Menu. Or select the

Browser (Menu 4)

The Wireless Application Protocol (WAP) browser on

your phone allows you to access the wireless web.

Using the WAP browser, you can access updated

information and a wide variety of media content, such

as wallpapers, ring tones, and music files.

on the top of the screen.

2. Select one of the following browser options:

•

Back: go back to the previous page.

Home: go back to the homepage.

Exit: exit the WAP browser.

Reload: reload the current page.

Show URL: display the URL address of the

current web page. You can also set the current

page as the homepage for the WAP browser.

About...: view version information for your

WAP browser.

To access this menu, press <Menu> in Idle mode and

select Browser

Home (Menu 4.1)

Use this menu to connect your phone to the network

and load the homepage of the wireless web service

provider. You can also press [

•

] in Idle mode.

Navigating with the WAP browser

Using WAP page options

From any WAP page, press [ ] to access the following

options:

Press

scroll through browser items

select a browser item

return to the previous page

return to the homepage

[Up] or [Down].

•

Go to URL: enter a URL address manually.

Bookmarks: switch to the Bookmarks menu.

ꢀ

Menu 4.2

Messages: check the Inbox

box in the Short messages menu. You can also

create and send a new SMS message. p. 45

Back> or [C].

•

Outbox, and Draft

and hold [C].

ꢀ

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Funbox: switch to the Funbox menu.

ꢀp. 60

•

Delete: delete the bookmark.

Exiting the WAP browser

Go to URL (Menu 4.3)

Press [ ] to exit the browser.

Use this menu to manually enter the URL address of a

website and access the website.

Bookmarks (Menu 4.2)

Use this menu to save URL addresses to quickly access

a website.

Clear cache (Menu 4.4)

Use this menu to clear the cache, which is the

temporary memory that stores the web pages you

have recently accessed.

Adding a bookmark

1. Select an empty location.

2. Enter a name for the bookmark and press [Down].

3. Enter a URL address.

Profile settings (Menu 4.5)

Use this menu to set up servers for the WAP browser.

Contact your service provider for details about your

settings options.

4. Press [

] to save the bookmark.

Accessing a bookmarked page

Scroll to a bookmark item and press [

For each server, the following options are available:

Using bookmark options

•

Profile name: assign a name to the server profile.

After saving an item, press <Options> to access the

following options:

Home URL: set the address of your homepage.

Bearer: select a bearer for each type of network

•

Go: access the website.

address accessed.

Edit: edit the address and name of the bookmark.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

•

Proxy: select whether or not the phone uses a

proxy server to launch the WAP browser. Your

service provider can tell you if your network

requires a proxy server, and they can give you the

appropriate settings.

•

GSM settings: customise the following GSM

network settings:

When the proxy is set to Enable

IP address: enter the WAP gateway address.

Port: enter the port number.

•

GPRS settings: customise the following GPRS

network settings:

Dial number: enter the PPP server phone number.

When the proxy is set to Enable

Password: enter the password.

IP address: enter the WAP gateway address.

Data call type: select a data call type.

Port: enter the port number.

When the proxy is set to Disable

APN: enter the access point name of the GPRS

DNS 1: enter the primary address.

DNS 2: enter the secondary address.

Dial number: enter the PPP server phone number.

network gateway.

Password: enter the password.

When the proxy is set to Disable

Password: enter the password.

DNS 1: enter the primary address.

Data call type: select a data call type.

DNS 2: enter the secondary address

APN: enter the access point name of the GPRS

network gateway.

Current proxy (Menu 4.6)

Use this menu to activate one of the proxy servers you

have set up.

Password: enter the password

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Press <Options> to access the following options:

Messages (Menu 5)

•

Text style: change the text attributes.

Add media: add a picture, animated image, or

a melody to the message.

Use the Messages menu to send and receive short

messages, multimedia messages, and e-mails. You

can also use WAP push message, Voice mail, and Cell

broadcast message features.

•

Text template: retrieve a text template.

Save message: save the message in the

Draft box.

To access this menu, press <Menu> in Idle mode and

select Messages

•

Language select: change the language used

in T9 input mode.

Short messages (Menu 5.1)

4. When you finish, press <Options> and select

Send and save or Send only

Short Message Service (SMS) allows you to send or

receive text messages including pictures, audio clips,

and animated images.

5. Enter a destination number.

To send the message to more than one recipient,

press [Down] and fill in the destination fields.

The maximum number of characters allowed in a

short message varies by service provider. If your

message exceeds the maximum number of

characters, the phone will split the message.

6. Press <Options> and select Send

Viewing received SMS messages

1. From the Short messages menu, select Inbox

Creating an SMS message

1. From the Short messages menu, select Create

2. Select a message.

While viewing the message list, press <Options> to

access the following options:

2. Enter your message.

You can enter up to 160 standard characters, or

approximately 70 Unicode characters, such as ‘â’.

•

View: display the message.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

•

Reply: reply to the sender.

Send: forward the message.

Delete: delete the message.

Delete all: delete all messages.

Call back: call the sender.

•

Block number: add the sender’s number to the

Blocked number list.

•

Protection: protect the message from being

deleted.

Viewing sent or saved SMS messages

1. From the Short messages menu, select Outbox

Block number: add the sender’s number to the

Blocked number list.

or Draft

2. Select a message.

While viewing a message, press <Options> to access

While viewing the message list, press <Options> to

the following options:

access the following options:

•

Reply: reply to the sender.

Send: forward the message.

Call back: call the sender.

Edit: edit the message.

•

View: open the message.

Send: send or resend the message.

Edit: edit the message.

Delete: delete the message.

Delete all: delete all messages.

Delete: delete the message.

Cut media: save media items from the message

to your phone’s memory.

While viewing a message, press <Options> to access

the following options:

•

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

•

Send: send or resend the message.

Edit: edit the message.

Transfer: move the message between the SIM

card and the phone’s memory.

Delete: delete the message.

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

•

Character support: select a character

encoding type. If you select Auto, the phone

switches the encoding type from GSM-alphabet

to Unicode if you enter a unicode character. Use

of Unicode encoding will reduce the maximum

number in a message to about half.

Validity period: set the length of time your

messages are stored in the message centre

while the network attempts to deliver them.

Message type: set the default message type.

Service centre: store or change the number

of your message centre.

Transfer: move the message between the SIM

card and the phone’s memory.

Protection: protect the message from being

deleted.

Changing SMS settings

1. From the Short messages menu, select

Settings

•

2. Select a setting profile to be customised. The last

setting profile accessed will be activated for

sending subsequent messages.

Setting up the Blocked number list

3. Change the following settings:

Use the Blocked number list to reject SMS messages

from specific phone numbers.

The setting options available in this menu may

vary depending on your service provider.

1. From the Short messages menu, select Block

number

•

Reply path: allow the recipient to reply to you

through your message centre.

Delivery report: set the network to inform

you when your message has been delivered.

2. Enter the phone number you want to block.

Press [Down] and add up to ten phone numbers.

3. Press <Options> and select Save

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

4. Select the Message line and enter the text.

Clearing SMS message boxes

1. From the Short messages menu, select Delete

5. Press <Options> to access the following options:

all

•

Edit: edit the subject or text of your message.

Add media sound: add more photos, videos,

or sounds to the message.

2. Press [

cleared.

] to check the message box(es) to be

3. Press <Delete>.

•

Preview: display the message you have

created.

Add page: add pages. Move to each page by

pressing [Left] or [Right] on the message

screen.

Page timing: specify how long a page

displays. After the specified time, the display

automatically scrolls to the next page.

Text style: format the text colour, size, or

attributes.

4. Press <Yes> to confirm the deletion.

Multimedia messages (Menu 5.2)

Multimedia Message Service (MMS) delivers messages

containing a combination of text, image, video, and

audio, from phone to phone or from phone to e-mail.

•

Creating an MMS message

1. From the Multimedia messages menu, select

•

Create

Clear subject/Picture & Video/sound/

message: clear the subject, images, audio, or

text.

Delete page: delete an added page.

Save message: save the message in the

2. Select the Subject line and enter the subject.

3. Select the Picture & Video or Sound line and add

•

an image, a video, or an audio file.

The maximum size allowed for an MMS message

can differ depending on the country. If you

cannot attach another file, add another page.

Draft

6. When you have finished, press <Options> and

select Send

My folder, or Template box.

Download from Www.Somanuals.com. All Manuals Search And Download.

7. Enter a phone number or e-mail address.

•

Reply all: send a reply to the sender and all of the

recipients in the To and Cc fields.

To send the message to more than one recipient,

press [Down] and fill in additional destination

fields.

Forward: forward the message to another person.

If the message contains media purchased on the

Internet, forwarding is not available.

8. Press <Options> and select Send

•

Call back: call the sender.

Viewing received MMS messages

Delete: delete the message.

Delete all: delete all messages.

1. From the Multimedia messages menu, select

Inbox

Save as template: save a copy of the message in

the Template folder.

This menu displays MMS messages that you have

received. The following icons tell you the message

status:

•

Properties: view the message properties.

•

has been read

has not been read

is being retrieved from the server

Notification that you have read

Notification that you have not read

When you select a notification, you can access

Retrieve to retrieve the message from the MMS

server.

While viewing a message, press <Options> to access

the following message options:

2. Select a message.

•

Replay: replay the message.

While viewing the message list, press <Options> to

access the following options:

Reply: send a message to the sender.

•

View: open the message.

Reply: send a reply to the sender.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

•

Reply all: send a reply to the sender and all of the

recipients in the To and Cc fields.

While viewing the message list, press <Options> to

access the following options:

•

Forward: forward the message to another person.

If the message contains media content purchased

on the Internet, forwarding is not available.

•

View: open the message.

Send: send or resends the message.

Edit: edit the message.

•

Call back: call the sender.

Delete: delete the message.

Delete all: delete all of messages.

Properties: display the message properties.

Cut media: save media items from the message

to your phone’s memory.

While viewing a message, press <Options> to access

the following options:

•

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

•

Replay: replay the message.

Send: send or resends the message.

Edit: edit the message.

Move to my folder: move the message to the My

folder box.

Save as template: save a copy of the message in

the Template box.

Delete: delete the message.

Properties: view the message properties.

Cut media: (for My folder) save media items

from the message to your phone’s memory.

Viewing sent or saved MMS messages

1. From the Multimedia messages menu, select

•

Cut address: (except Draft) extract a URL, e-mail

address, or phone number from the message.

Outbox

Draft, or My folder

Move to my folder: move the message to the My

folder box.

2. Select a message.

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Save as template: (except Draft) save a copy of

the message in the Template box.

•

Send: send the template.

Edit: edit the template.

Properties: display the message properties.

Delete: delete the template.

Using MMS templates

Changing MMS settings

Your phone has 11 preset messages that you can use

when composing a message.

You can customise the settings for sending and

receiving MMS messages.

1. From the Multimedia messages menu, select

Template

Settings

2. Select an MMS template.

2. Select a setting category and change the settings.

While viewing the template list, press <Options> to

access the following options:

Send settings

•

Priority: set the priority level of your messages.

•

View: display the template.

Send: send the template.

Edit: edit the template.

Validity period: set the length of time your

messages are stored in the message centre.

•

Delivery after: set the time delay before

messages are sent.

New: add a new template.

Delete: delete the template.

Delete all: delete all of templates.

Address hiding: hide your phone number on the

recipient’s phone.

Delivery report: set the network inform to you

when your message has been delivered.

While viewing a message, press <Options> to access

the following options:

Read reply: request a reply from the recipient.

•

Replay: replay the template.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

Receive settings

MMS profiles

•

Home reception: determine if your phone

retrieves new messages automatically when you

are in your home service area.

You can configure required network settings for MMS.

The last profile accessed is automatically activated for

sending or receiving subsequent messages.

•

Roaming reception: determine if your phone

retrieves new messages automatically when you

are roaming in another network.

Check with your service provider before you change

any MMS settings on your phone.

•

Current profile: select a profile.

Home reception and Roaming reception have the

following options:

Profile settings: customise the following options

for each profile:

Automatic: the phone automatically retrieves

messages from the server.

Profile name: assign a name to the MMS profile.

Reject: the phone rejects all messages.

Server URL: enter the address of your MMS

server.

Manual: the phone displays notifications. Use the

Retrieve option to manually download new

messages.

Proxy: connect to the GPRS network using the

proxy server.

•

Anonymous reject: reject messages from

anonymous senders.

GPRS settings: customise the settings required

for connecting to the GPRS network.

•

Adverts reject: reject advertisements.

IP address: (when the proxy is set to Enable)

enter the gateway address.

Report allowed: send a delivery report from the

network to the sender.

Port: (when the proxy is set to Enable) enter

the port number.

Download from Www.Somanuals.com. All Manuals Search And Download.

DNS1: (when the proxy is set to Disable) enter

the primary address.

Email (Menu 5.3)

You can send and receive e-mails that include text,

audio, and images. To use this feature, you need to

subscribe to an e-mail service and set up your e-mail

profile and account.

Creating an e-mail

1. From the Email menu, select Create

DNS2: (when the proxy is set to Disable) enter

the secondary address.

APN: enter the access point name used for the

address of the GPRS network.

ꢀp. 58, p. 57

Password: enter the password.

2. Select the Subject line and enter the subject of

Version: select an available OMA version and

maximum size limit for sending or receiving

messages.

your e-mail.

3. Select the Message line and enter the e-mail text.

4. Select the File attach line.

Depending on your service provider, it may not

be possible to support the maximum limit

295KB. In this case, try again after changing the

setting to 100KB.

5. Add Images

Videos, Music, or Sound.

6. Press <Options> to access the following options:

•

Add: add a subject, text, or media files.

Edit: edit the subject or text.

View: open the attached file.

Save Email: save the e-mail in the Draft or

My folder box.

Clearing MMS message boxes

1. From the Multimedia messages menu, select

Delete all

2. Press [

cleared.

] to check the message box(es) to be

•

Clear subject/message: clear the subject or

text.

3. Press <Delete>.

4. Press <Yes> to confirm the deletion.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

•

Remove attachment: delete the selected

attachment.

Remove all attachments: delete all

attachments.

• The icon changes to an open envelope when

you read the e-mail.

• An

icon shows that an e-mail was sent with

high priority. A grey icon means that the

e-mail is of low priority.

7. When you finish, press <Options> and select

Send

8. Enter an e-mail address.

3. Scroll to an e-mail or header and press [

To send the e-mail to more than one recipient,

press [Down] and fill in additional destination

fields.

4. If the e-mail has more than one page, press [ / ]

to scroll through pages one by one.

Press [ ] or [ ] to move to the first or last page.

5. Select an attached file to view or play it.

9. Press <Options> and select Send

Viewing received e-mails

1. From the Email menu, select Inbox

While viewing the e-mail list, press <Options> to

access the following options:

2. Select Check new mail to get new mails from

Options may vary depending on the status of the

e-mail.

your server.

The phone checks for new e-mails and retrieves

received e-mails. The icons tell you the status of

each e-mail:

•

View: open the selected item.

Retrieve: retrieve one or all e-mails from the

e-mail server.

•

retrieved from the e-mail server

retrieved e-mail with attachment.

not retrieved

•

Reply: send a reply to the sender or to all of the

recipients.

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Forward: forward the e-mail.

•

Block address: add the sender’s e-mail address

to the Blocked address list.

Delete: delete the currently selected item.

Delete all: delete all e-mails.

Move to my folder: move the e-mail to the My

folder box.

Sort: sort the e-mails by size, subject, data, or

senders’ e-mail addresses.

Properties: display the properties of the e-mail.

•

Block address: add the sender’s e-mail address

to the Blocked address list.

Viewing sent or saved e-mails

1. From the Email menu, select Outbox Draft, or

My folder

Properties: display the properties of the e-mail.

2. Select an e-mail.

While viewing a header or e-mail, press <Options> to

access the following options:

While viewing the e-mail list, press <Options> to

access the following options:

•

Retrieve: retrieve one or all e-mails.

•

View: open the e-mail.

Open file: open the attached file.

Send: send or resends the e-mail.

Cancel: stop sending the e-mail.

Edit: edit the e-mail.

Save file: save the attached file in your phone’s

memory.

•

Reply: send a reply to the sender or to the sender

and all of the recipients.

Delete: delete the e-mail.

Delete all: delete all e-mails.

•

Forward: forward the e-mail.

Delete: delete the e-mail.

Sort: sort the e-mails by size, subject, data, or

senders’ e-mail addresses.

Cut address: extract e-mail addresses, URLs, and

phone numbers.

•

Properties: display the properties of the e-mail.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

While reading a message, press <Options> to access

the following options:

•

Delivery confirm: set the network to inform you

when your e-mail has been delivered.

•

Open file: open the attached file.

Read confirm: send a request for a reply along

with your e-mail.

Save file: save the attached file in your phone’s

memory.

•

Priority: select the priority level of your e-mail.

•

Cancel: stop sending the e-mail.

Send: send or resent the e-mail.

Edit: edit the e-mail.

Include signature: attach your name, phone

number, a simple memo, or tag line to your e-mail.

Receive settings

•

Check interval: determine how often the phone

checks the server for incoming e-mails.

Delete: delete the e-mail.

Move to my folder: move the e-mail to the My

folder box.

If you set this option to Not used, you can use the

Check new mail feature to check your e-mail

manually.

•

Properties: view the properties of the e-mail.

Changing e-mail settings

1. From the Email menu, select Settings

Read reply: determine whether or not the phone

sends a read-reply request.

2. Select a setting category and change the settings.

When this option is set to Announce, the phone

reminds you to send a read-reply request with

your e-mail address.

Send settings

•

Send copy to self: send a copy of your e-mail to

your own e-mail address.

Retrieve option: determine whether the phone

retrieves headers only or the entire e-mail.

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Delete option: determine whether e-mails are

deleted immediately or the next time you connect

to the server.

User name: enter a name to be displayed as the

sender’s name in your outgoing e-mails.

Email address: enter your e-mail address.

Reject if over: determine the maximum size for

incoming e-mails. Your phone will reject e-mails

that exceed the specified size.

SMTP server: enter the IP address or domain

name of the outgoing e-mail server.

SMTP port: enter the SMTP port number.

E-mail account

Protocol type: select the protocol for the

incoming e-mail server. The remaining options

depend on the protocol type setting.

Set up your e-mail account(s) and select the one to be

used:

When the protocol type is POP3

You cannot change e-mail account settings while an

e-mail is being sent or retrieved. Your e-mail

service provider can give you the information

needed for the below settings.

POP3 server: enter the IP address or domain

name of the server that receives your e-mail.

POP3 port: enter the POP3 port number.

APOP login: connect to the server by using the

APOP login scheme when this option is selected.

•

Current account: select an account.

Account setting: configure up to five e-mail

accounts using different e-mail servers. The

following options are available for each account:

User ID: enter your e-mail ID.

Password: enter your e-mail password.

Account name: enter a name for the currently

selected account.

When the protocol type is IMAP4

IMAP4 server: enter the IP address or domain

name of the server that receives your e-mail.

In use: select this option to use the account and

to display the account in the Inbox

IMAP4 port: enter the IMAP4 port number.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

Retrieve headers: set the number of headers you

will retrieve from the server.

Password: enter the password.

DNS1: enter the primary address.

DNS2: enter the secondary address.

Retrieve attachments: select this option to

receive attachments with e-mails.

Setting up the Blocked address list

User ID: enter your e-mail ID.

Password: enter your e-mail password.

Email profile

Use the Blocked address list to reject messages from

e-mail addresses that you specify.

1. From the Email menu, select Block address

2. Enter an e-mail address you want to block.

3. Add as many as ten e-mail addresses.

You can configure the network settings required to

send or receive e-mails.

You cannot change e-mail profile settings while an

e-mail is being sent or retrieved.

4. Press <Options> and select Save

Clearing e-mail boxes

1. From the Email menu, select Delete all

The following options are available:

•

Current profile: select a profile.

2. Press [

cleared.

] to check the message box(es) to be

Profile settings: configure up to five e-mail

profiles. For each profile, the following options are

required to connect to the GPRS network:

3. Press <Delete>.

4. Press <Yes> to confirm the deletion.

Profile name: enter a name for the e-mail profile.

You cannot clear the Inbox or Outbox while an

e-mail is being sent or retrieved.

APN: enter the access point name used for the

GPRS network address.

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Connect to voice mail: connect to the voice

server to allow you to listen to your messages. You

can also connect to the voice mail server by

Push messages (Menu 5.4)

Use this menu to access messages from the WAP

server.

pressing and holding [1] in Idle mode.

•

Inbox: view push messages you have received.

Voice server number: change the voice mail

server name or number.

Settings: determine whether or not your phone

receives push messages.

Always: the phone receives push messages.

Text template (Menu 5.6)

Never: the phone rejects push messages.

Use this menu to preset a maximum of ten frequently

used messages.

Optional: the phone receives push messages from

the service centre set in this option.

Adding a text template

1. Select an empty location.

•

Delete all: delete all of push messages.

2. Enter the message and press [

Voice mail (Menu 5.5)

Using template options

Use this menu to store the number of the voice mail

server and access your voice mails.

From the template list, press <Options> to access

the following options:

You must enter the voice server number before you

can access your voice mails. Your service provider

can give the voice server number.

•

Edit: add a template or change the selected one.

Send message: send the template as an SMS or

MMS message.

•

Delete: delete the template.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

Broadcast messages (Menu 5.7)

Memory status (Menu 5.8)

The Cell Broadcast service delivers short messages on

various topics such as the weather or traffic.

Use this menu to view the memory status for text,

multimedia, e-mail, or push messages.

Use this menu to change the settings for the service

and to access broadcast messages.

Funbox (Menu 6)

•

Read: open received messages.

The Funbox menu allows you to access images,

videos, voice memos, music files, and sounds stored in

the phone’s memory.

The Temporary box saves network messages until

the phone is switched off.

The Archive box saves network messages

indefinitely. Press <Options> and select Save

when a text notification appears to save to the

Archive box.

To access this menu, press <Menu> in Idle mode and

select Funbox

Images (Menu 6.1)

•

Receive: enable or disable the reception of

broadcast messages.

This menu displays photos you have taken and images

downloaded or received in messages.

Channel: specify the channels from which you

receive broadcast messages.

Viewing an image

1. Select an image folder, Photos

My photos, or

Language: select the language in which broadcast

messages display.

Downloaded images

A list of images displays. For downloaded images,

the icons tell you the status of the files:

Please contact your service provider for details.

•

you can forward to other people

you are unable to forward to other people

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Scroll to an image and press [

Music (Menu 6.3)

Using image options

This menu displays MP3 music files you have

downloaded or imported from your computer.

While viewing the image list or an image, press

Options> to access the options. p. 72

ꢀ

Playing a music file

Scroll to a file and press [

].ꢀp. 36

Videos (Menu 6.2)

Using music options

This menu displays video clips you have recorded,

downloaded, or received in messages.

While viewing the music list, press <Options> to

access the following options:

Playing a video clip

1. Select a video folder, Video clips

Available options vary depending on whether or not

playback is in progress.

My video clips,

or Downloaded videos

•

Play/Pause: begin/pause playback.

A list of videos displays. For downloaded videos,

the icons tell you the status of the files:

Send: send the currently selected file via e-mail,

Bluetooth, or infrared port.

•

you can forward to other people

you are unable to forward to other people

•

Add play list: add a file to the play list.

2. Scroll to a video clip and press [

].ꢀp. 73

Open play list: go to the play list.

Set as: set the file as your ring tone or as a caller

alert melody for a Phonebook entry.

Using video options

While viewing the video list, press <Options> to

access the options. p. 74

•

Rename: change the file name.

ꢀ

Delete: delete the file.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

•

Settings: change the default settings for playing

files.

A list of sound clips displays. For downloaded

sounds, the icons tells you the status of the files:

Repeat: select a repeat mode.

Shuffle: select a playing order.

Volume: select a volume level.

•

you can forward to other people

you are unable to forward to other people

2. Scroll to a sound clip and press [

].ꢀp. 38

Lock volume key: lock [ / ] so that you can

prevent an accidental press of the keys from

affecting playback.

Using sound options

While viewing the sound list, press <Options> to

access the options. p. 38

ꢀ

Equalizer value: select an equalizer setting.

Delete all: delete all of files.

Memory status (Menu 6.5)

•

Protection: protect the file from being deleted.

Properties: display the properties of the file.

You can check the total amount of memory for media

items and the amount of memory currently in use in

each media box.

Sounds (Menu 6.4)

Organiser (Menu 7)

The Organiser feature enables you to keep track of

your schedule and tasks, to view missed alarm events,

and to make a memo.

This menu displays the sound files you have recorded,

downloaded, or received in messages.

Playing a sound clip

1. Select a sound folder, Voice list or Downloaded

To access this menu, press <Menu> in Idle mode and

sounds

select Organiser

Download from Www.Somanuals.com. All Manuals Search And Download.

Preceding events: delete events on past dates.

Month view (Menu 7.1)

•

Delete all: delete all of scheduled events.

Use this menu to keep track of your monthly schedule.

Consulting the calendar

You can schedule up to 400 events on the calendar,

and schedule more than one event per day.

When you select Month view to display the calendar,

today’s date is marked with a red box.

Entering a new scheduled event

1. Select a date on the calendar.

The number of events displays at the bottom of the

calendar. The following icons indicate the type of

event:

2. Press <Options> and select Create

or Miscellaneous

→

Schedule

3. Enter information or change the settings in the

following entry fields:

•

Scheduled events

Tasks

•

Anniversaries

Miscellaneous events

•

Subject: enter the title of the event.

Details: enter event details.

Press <Options> to access the following options:

Start date and End date: enter the starting

and ending dates for the event.

Start time and End time: enter the starting

and ending times for the event.

AM/PM: select AM or PM in 12-hour time

format.

•

View: access the stored memo(s) for that date.

Create: add a new event, anniversary,

miscellaneous event, or task.

•

Week view: switch to the week view screen.

Go to today: access the current date.

Go to date: enter a specific date.

Location: (for Schedule) enter information

about the event location.

Delete: access the following deleting options:

Selected date: delete items stored on the

Alarm: set an alarm for the event.

currently selected date.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

•

Before: set the time for the alarm.

•

Alarm time: enter the time for the alarm to

sound.

AM/PM: select AM or PM in 12-hour time

format.

Alarm tone: select an alarm tone.

Repeat: (for Schedule) set the event to recur,

and set a repeat unit.

•

Alarm tone: select an alarm tone.

Repeat every year: you can set the phone to

remind you of the anniversary every year.

•

Until: (for Schedule) if the event will recur,

set the ending date.

4. Press <Save> to save the event.

Entering a new anniversary

1. Select a date on the calendar.

Entering a task

1. Select a date on the calendar.

2. Press <Options> and select Create

→

Anniversary

→

To do.

3. Enter information or change the settings in the

following entry fields:

3. Enter information or change the settings in the

following entry fields:

•

Occasion: enter information about the

anniversary.

Date: enter the date.

Alarm: set an alarm for the anniversary.

Before: set the time for the alarm. Select day

•

To do: enter information about the task.

Start date: enter the starting date.

Due date: enter the ending date.

Priority: select a priority level.

•

4. Press <Save> to save the event.

or week

Download from Www.Somanuals.com. All Manuals Search And Download.

Viewing an event

Week View (Menu 7.2)

Square brackets on a calendar date indicate the

following type of events scheduled for that day:

Use this menu to view events for the selected week.

The current date is marked in red. Blue boxes indicate

scheduled events, and green boxes indicate

miscellaneous events. Select the cell that contains the

event you want.

•

Blue: scheduled

Red: task

•

Orange: anniversary

Green: miscellaneous event

1. Select a date on the calendar to display the events

for that day.

Day view (Menu 7.3)

2. Select an event to view its details.

Use this menu to view events for the selected date.

Select an event to view its details.

3. Press <Options> to access the following options:

•

View: access the selected event.

Edit: edit the event.

Send: send the event via SMS, MMS, e-mail,

Bluetooth, or infrared port.

Create: add a new event.

Month view: switch to the month view screen.

Week view: switch to the week view screen.

Schedule (Menu 7.4)

This menu displays the scheduled events. If you have

set the Repeat and Alarm options, the

are activated. Select an event to view its details.

and

icons

•

Anniversary (Menu 7.5)

Done/Undone: change the status of the

This menu displays anniversaries you have created. If

you have set the Repeat and Alarm options, the

event.

•

Delete: delete the event.

Delete all: delete all of the events for the

selected date.

and

details.

icons are activated. Select an event to view its

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

Viewing a missed event alarm

Miscellaneous (Menu 7.6)

1. From the Organiser menu, select Missed alarm

This menu displays miscellaneous events you have

events

created. If you have set the Alarm option, the

is activated. Select an event to view its details.

icon

2. Select an event.

3. Press <Confirm> to confirm and delete the event.

To do (Menu 7.7)

Using missed alarm options

Use this menu to display tasks you have created. The

colours of status check boxes indicate the importance:

From the event list, press <Options> to access the

following options:

•

Red

for high priority

•

View: access the event.

Delete: delete the event.

Delete all: delete all events.

Blue for normal priority

Grey for low priority.

A check mark appears in the status check box if the

task has been completed. The options you can use are

the same as in Day view.

Memo (Menu 7.9)

Use this menu to create memos and view memos you

have stored.

Missed alarm events (Menu 7.8)

Creating a new memo

When you are unable to acknowledge an alarm, the

phone displays a missed alarm notification.

1. Press [

2. Enter the memo text and press [

Press <View> to view the corresponding event.

Download from Www.Somanuals.com. All Manuals Search And Download.

Viewing a memo

• Do not take photos of people without their

permission.

Select a memo to view its details.

• Do not take photos in a place where cameras are

not allowed.

• Do not take photos in a place where you may

interfere with another person’s privacy.

Using memo options

From the memo list, press <Options> to access the

following options:

•

Edit: edit the memo.

Create: add a new memo.

Delete: delete the selected memo.

Delete all: delete all memos.

Take a photo (Menu 8.1)

The camera produces JPEG photos.

When you take a photo in direct sunlight or in bright

conditions, shadows may appear on the photo.

Memory status (Menu 7.10)

Taking a photo

1. If the phone is closed, open the phone.

This menu displays the total amount of memory for

the calendar, the number of events you have created,

and the total number of events you can store.

2. Press and hold [ ]. The image to be captured

appears on the display.

Camera (Menu 8)

You can use the camera module embedded in your

phone to take photos and record videos.

3. Adjust the image by aiming the camera lens at the

subject.

•

Press the left soft key to use the camera

options. p. 68

Use the keypad to change the camera settings

or switch to other modes. p. 69

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢀ

To access this menu, press <Menu> in Idle mode and

select Camera, or press [ ].

•

ꢀ

Menu functions

4. Press [ ] to take a photo. The photo is saved in

Mosaic shot: take several stills and save them in

one frame. Select the number of still images the

camera will take.

the Photos folder.

Hold the phone still for one or two seconds after

pressing the camera shutter key to allow the

image data to process.

Night shot: take a high quality photo in low

lighting conditions.

Automatic save: set the phone to automatically

save a photo after taking the photo.

5. To

use photo options

Press

•

Effects: change the colour tone or apply a special

effect to the photo.

<Options>.ꢀp. 70

delete the photo

<Delete>.

•

Frames: apply a decorative frame.

return to Capture mode

[C] or [

Timer: set a time delay before the camera takes a

photo.

•

Go to photo album: display the photos stored in

the Photos or My photos folder.

Using camera options in Capture mode

In Capture mode, press the left soft key to access the

following options:

Settings: change the default settings for taking a

photo.

•

Shooting mode: take a photo in the following

modes:

Size: select an image size.

Quality: select an image quality.

Single shot: take a photo in the normal mode.

Shutter sound: select the sound that you hear

Multi shot: take a series of action stills. Select the

number of photos the camera will take.

when you press the shutter, [ ] or [

Download from Www.Somanuals.com. All Manuals Search And Download.

Spot focus: adjust the exposure based on a

specific area of the image. Select On to display the

spot focus frame in the middle of the image, and

change the exposure according to the brightness of

the image fragment in the frame.

Using the keypad in Capture mode

You can use the keypad to customise your camera

settings in Capture mode.

Key

Function

ISO: change the ISO setting, which controls the

sensitivity of your camera. For low light situations,

lower the ISO number to increase the quality.

Flips the image vertically.

Shows the mirror image.

Adjusts the brightness of the image.

Left/

Right

The higher the ISO number, the faster the camera

shutter functions and the more sensitive the

camera is to light. Higher ISO settings may bring

some distortion to an image.

Up/

Down

Zooms in or out.

Default name: change the default prefix of the

photo name.

Switches to Record mode.

ꢀp. 70

Changes the image size.

•

Flash: turn the flash on or off.

Changes the image quality.

Changes the camera mode.

Camera short cuts: view the functions of the

keys you can use.

Changes the colour tone or applies a special

effect to the photo.

Reduces the distortion on the image to

maximise detail and sharpness.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

•

Properties: view the properties of the photo.

Key

Function

Selects a decorative frame.

Sets the timer.

Record video (Menu 8.2)

You can record a video of what is displayed on the

camera screen and save it as a .3gp file.

Shows the photos stored in the Photos or

My photos folder.

Recording a video

Turns the flash on or off.

1. Turn the camera on, and aim the lens at the

subject. Adjust the image.

Shows the real image size to be captured.

•

Press the left soft key to use the camera

options. p. 71

Use the keypad to change the camera settings

or switch to other modes. p. 71

2. Press [ ] to start recording.

ꢀ

Using photo options

•

After saving a photo, press <Options> to access the

following options:

ꢀ

•

Take another: return to Capture mode.

3. Press <Stop> or [ ]. The video is automatically

Send: send the photo via MMS, e-mail, Bluetooth,

or infrared port.

saved in the Video clips folder.

•

Set as: set the photo as your wallpaper or as a

caller ID image for a Phonebook entry.

4. To

play back the video clip

Press

[

Go to photo album: display the photos stored in

the Photos or My photos folder.

use the video options

delete the video clip

return to Record mode

Options>.

Delete>.

ꢀp. 72

•

Rename: change the name of the photo.

Protection: protect the photo from being deleted.

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Flash: turn the flash on or off.

Using camera options in Record mode

Camcorder short cuts: view the functions of the

keys you can use.

In Record mode, press <Options> to access the

following options:

•

Effects: change the colour tone or apply a special

effect to a video.

Using the keypad in Record mode

You can use the keypad to customise your camera

settings in Record mode:

Timer: set a time delay before the camera starts

recording a video.

Key

Function

Go to video album: display the video clips stored

in the Video clips or My video clips folder.

Flips the image vertically.

Shows the mirror image.

Adjusts the brightness of the image.

Settings: change the following settings for

recording a video:

Left/

Right

Recording mode: select a video recording mode.

Select Limit of MMS to record a video suitable for

an MMS message.

Up/

Zooms in or out.

Down

Select Normal to record a video within the limit of

the currently available memory.

Switches to Capture mode.

ꢀp. 67

Size: select an image size.

Changes the frame size.

Quality: select an image quality.

Audio rec.: record audio with a video clip.

Changes the image quality.

Changes the video recording mode.

Default name: change the default prefix of the

video name.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

•

Rename: change the name of the video clip.

Key

Function

Protection: protect the video clip from being

deleted.

Changes the colour tone or applies a special

effect to the photo.

•

Properties: view the properties of the video clip.

Reduces the distortion on the image to

maximize detail and sharpness.

Photos (Menu 8.3)

Mutes or unmutes the audio.

Sets the timer.

Use this menu to access a list of photos you have

taken.

Viewing the photos

Shows the video clips stored in the Video

clips or My video clips folder.

1. Scroll to a photo and press [

2. To go back to the photo list, press [

] or Back.

Turns the flash on or off.

Using photos options

Using video options

Press <Options> to access the following options:

Press <Options> after saving a video clip to access

the following options:

Available options vary depending on whether you

are looking at the photo list or viewing a photo.

•

Record another: return to Record mode.

•

View: open the photo.

Send: send the video clip via MMS, e-mail,

Bluetooth, or infrared port.

List: return to the photo list.

Send: send the photo via MMS, e-mail, Bluetooth,

or infrared port.

•

Go to video album: move to the Video clips or

My video clips folder.

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Move to My photos: move the photo to the My

photos folder.

Video clips (Menu 8.5)

Use this menu to access a list of videos you have

recorded.

Set as: set the photo as your wallpaper or as a

caller ID image for a Phonebook entry.

Playing a video clip

Edit: access the following options:

Scroll to a video clip and press [

During playback:

Emoticons: add an emoticon to the photo. Select

one and move it by pressing the Navigation keys.

•

Use the following buttons on the display:

Frames: select a decorative frame.

Effects: change the colour tone or apply a special

effect to the photo.

Buttons

Function

Pauses

•

Slide show: set all photos to display as a slide

show. You can select a time interval between

photos.

Resumes

Stops

•

Rename: change the name of the photo.

Delete: delete the photo.

Skips backward through a file

Skips forward through a file

Repeats the file

Delete all: delete all of photos.

Protection: protect the photo from being deleted.

Properties: view the properties of the photo.

To select a button, press [Left] or [Right] to

highlight it and press [ ].

Press [ / ] to adjust the volume.

My photos (Menu 8.4)

•

Use this menu to view photos you have moved from

the Photos folder.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

Using video options

Settings (Menu 9)

Use this menu to customise your phone settings. You

can also reset the settings to their default values.

Press <Options> to access the following options:

•

Play: play the video clip.

Send: send the video clip via MMS, e-mail,

Bluetooth, or infrared port.

To access this menu, press <Menu> in Idle mode and

select Settings

•

Move to My video clips: move the video clip to

the My video clips folder.

Time & Date (Menu 9.1)

•

Rename: change the name of the video clip.

Use this menu to change the time and date displayed

on your phone. Before setting the time and date,

Delete: delete the video clip.

specify your time zone in the World time menu.

ꢀp.

Delete all: delete all video clips. This option

appears on the video clip list.

•

Set time: enter the current time using the number

keys.

•

Protection: protect the video clip from being

deleted.

•

AM/PM: select AM or PM in 12-hour time format.

Properties: view the properties of the video clip.

Time format: select 12-hour or 24-hour time

My video clips (Menu 8.6)

format.

•

Set date: enter the current date using the number

keys.

Use this menu to access video clips you have moved

from the Video clips folder.

Date format: select a date format.

Download from Www.Somanuals.com. All Manuals Search And Download.

Short cut (Menu 9.2.4)

Phone settings (Menu 9.2)

You can use the Navigation keys as shortcut keys to

access specific menus directly from Idle mode. Use

this menu to change these shortcut assignments.

Many different features of your phone’s system can be

customised to suit your preferences.

Language (Menu 9.2.1)

Assigning a shortcut to a key

Use this menu to select one of several languages for

the display text.

1. Select the key to be used as a shortcut key.

2. Scroll to the menu that will be assigned to the key.

3. Press <Save>.

Greeting message (Menu 9.2.2)

Use this menu to enter the greeting that is displayed

briefly when the phone is switched on.

Using shortcut options

Press <Options> to access the following options:

Slide settings (Menu 9.2.3)

•

Change: change a shortcut menu.

Use this menu to set how the phone reacts when you

open it for an incoming call, and when you close it

while using a function.

Remove: deactivate the shortcut assignment to

the selected key.

•

Remove all: deactivate all shortcut assignments.

•

Up: set whether or not to answer a call by opening

the phone.

Extra settings (Menu 9.2.5)

•

Down: set whether or not the phone maintains

the menu you are using when you close the phone.

You can turn the automatic redialing or answering

features on or off.

When you set Down to Continue operation, the

keypad lock works only in Idle mode.

•

Auto redial: set the phone to make up to ten

attempts to redial a phone number after an

unsuccessful call.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

•

Anykey answer: answer an incoming call by

pressing any key, except [ ] or <Reject>.

Text display (Menu 9.3.2)

You can change the display settings for the text

displayed on the idle screen.

When this option is set to Off, you must press [

or <Accept> to answer a call.

]

•

Text position: select a position. If you do not

want text to display in Idle mode, select Off

•

Voice clarity: removes extraneous noise and

increases call quality so that the person with whom

you are speaking can hear you clearly even if you

are in a noisy place.

•

Text style: select a style.

Text colour: select a colour.

Skin (Menu 9.3.3)

Display settings (Menu 9.3)

You can select a skin colour pattern for Menu mode.

Use this menu to change settings for the display and

light.

LCD brightness (Menu 9.3.4)

You can adjust the brightness of the display for

varying lighting conditions.

Wallpaper (Menu 9.3.1)

You can change the background image that is

displayed in Idle mode.

Backlight (Menu 9.3.5)

You can select the length of time the backlight and the

display stay on.

Select an image from the following image categories.

•

Default wallpapers: select one of preset images.

•

On: select the length of time the backlight is on at

times of inactivity.

Photos: select one of the photos you have taken.

My photos: select one of the photos stored in the

My photos folder.

•

Dim: select the length of time the display is in

Dimming mode after the backlight turns off. After a

specified time, the display turns off and the clock

displays.

•

Downloaded images: select one of the images

you have downloaded.

Download from Www.Somanuals.com. All Manuals Search And Download.

Message tone (Menu 9.4.3)

Sound settings (Menu 9.4)

Use this menu to set up the ringer for incoming SMS

messages, MMS messages, and e-mails.

Use this menu to customise various sound settings.

Incoming call (Menu 9.4.1)

•

Tone: select one of several message tones.

Use this menu to select a volume level and alert type

for incoming calls.

Alert type: specify how you are informed of any

incoming messages.

•

Ring tone: select a ring tone for the call ringer.

•

Repetition: specify how often the phone informs

you of a new message.

Volume: select a ringer volume.

Alert type: specify how you are to be informed of

incoming calls.

Power on/off (Menu 9.4.4)

Use this menu to select the melody that the phone

sounds when it is switched on or off.

Melody: the phone rings using the selected ring

tone.

Slide tone (Menu 9.4.5)

Vibration: the phone vibrates but not rings.

Use this menu to select the tone that the phone

sounds when you open or close the phone.

Vibration then melody: the phone vibrates three

times and then starts ringing.

Quiet mode (Menu 9.4.6)

Keypad tone (Menu 9.4.2)

Use this menu to set how the phone acts to alert you

to a specific event in Quiet mode, instead of making

sounds.

Use this menu to select the tone that the phone

sounds when you press a key.

You can adjust the keypad tone volume using [ / ]

in Idle mode.

•

Vibration: set the phone to vibrate.

Mute: mute all sound settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

1. Select a call diverting option:

Extra tones (Menu 9.4.7)

•

Divert always: divert all calls.

Busy: divert calls when you are on another

call.

No reply: divert calls when you do not answer

the phone.

Unreachable: divert calls when you are not in

an area covered by your service provider or

when your phone is switched off.

Cancel all: cancel all call diverting options.

Use this menu to customise additional tones for the

phone.

•

Minute minder: set the phone to beep every

minute during an outgoing call to keep you

informed of the length of your call.

•

Connection tone: set the phone to beep when it

is connected to the system.

Alerts on call: set the phone to beep when you

receive a new message or when the time for an

alarm comes during a call.

•

2. Select the type of calls to be diverted.

3. To activate call diverting, select Activate

•

Indicative tones: set the phone to beep when a

pop-up window displays.

Otherwise, select Deactivate

4. Move to the Divert to line.

Network services (Menu 9.5)

5. Enter the number to which calls are to be diverted

Use this menu to access network services. Please

contact your service provider to check their availability

and subscribe to them, if you wish.

and press <OK>.

6. If you selected No reply, move to the Sec line and

select the length of time the network delays before

diverting a call.

Call diverting (Menu 9.5.1)

This network service reroutes incoming calls to a

phone number that you specify.

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Enter the call barring password supplied by your

Call barring (Menu 9.5.2)

service provider and press <OK>.

This network service allows you to restrict your calls.

1. Select a call barring option:

Call waiting (Menu 9.5.3)

•

All outgoing: prohibit all outgoing calls.

International: prohibit international calls.

International except to home: only allow

calls to numbers within the current country

when you are abroad, and to your home

country, defined as where your home network

provider is located.

All incoming: prohibit incoming calls.

Incoming while abroad: prohibit incoming

calls when you use your phone outside of your

home country.

This network service informs you when someone is

trying to reach you while you are on another call.

1. Select the type of calls to which the call waiting

option will apply.

2. Press <Activate>. To deactivate call waiting,

press <Deactivate>.

Network Selection (Menu 9.5.4)

•

This network service allows you to either automatically

or manually select the network used when roaming

outside of your home area.

•

Cancel all: cancel all call barring settings,

allowing to be sent and received normally.

Change barring password: change the call

barring password obtained from your service

provider.

You can select a network other than your home

network only if there is a valid roaming agreement

between the two.

•

Automatic: connect to the first available network

when roaming.

2. Select the type of calls to be barred.

•

Manual: select the network you want.

3. Press <Activate>. To deactivate call barring,

press <Deactivate>.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

When you select a new band, your phone

automatically searches for all available networks. Your

phone registers with a preferred network within the

band.

Caller ID (Menu 9.5.5)

This network service allows you to prevent your phone

number from being displayed on the phone of the

person being called. However, some networks do not

allow the user to change this setting.

Active line (Menu 9.5.7)

•

Default: use the default setting provided by the

network.

Some SIM cards may be used with two subscriber

numbers. If your SIM card supports it, use this menu

to select the line that is used to make calls. Calls can

be answered on both lines, regardless of the selected

line.

Hide number: ensure your number does not

display on the other person’s phone.

Send number: send your number each time you

make a call.

Connectivity (Menu 9.6)

Band selection (Menu 9.5.6)

Use this menu to activate the IrDA port or the

Bluetooth feature.

For the phone to make and receive phone calls, it

must register with an available network.

You cannot use the Bluetooth and IrDA features

while using multimedia features such as voice

recorder, camera, and MP3 player, or vice versa.

Your phone can handle any of the following types of

networks: GSM 1900, Combined GSM 900/1800, and

GSM 900/1800/1900.

Bluetooth (Menu 9.6.1)

The country where you purchased your phone

determines the default band that it uses. When you

travel abroad, you must remember to change to an

appropriate band.

Using Bluetooth wireless, you can connect the phone

wirelessly to other Bluetooth devices and exchange

data with them, talk hands-free, or control the phone

remotely.

Download from Www.Somanuals.com. All Manuals Search And Download.

Bluetooth technology allows free wireless connections

between all Bluetooth-compliant devices within a

range of 10 metres. Since the devices communicate

using radio waves, they do not need to be in line of

sight to each other.

Searching for and pairing with a Bluetooth

device

1. From the Bluetooth setting options, select My

devices

2. Select Search new device

Setting up the Bluetooth feature

If you have searched for devices before, the phone

displays More devices along with the devices you

have searched for previously. To search for new

The Bluetooth menu provides the following options:

•

Activation: activate or deactivates the Bluetooth

feature.

devices, select More devices

After searching, a list of devices to which you can

connect displays. The following icons indicate the

kind of device:

My devices: search for connectable Bluetooth

devices.

ꢀp. 81

My phone’s visibility: allow other Bluetooth

devices to connect to your phone.

•

Hands-free or headset

Mobile phone

Computer

PDA

Unknown device

My phone’s name: assign a Bluetooth device

name to your phone, which is then displayed on

other devices.

•

Secure mode: determine if the phone asks for

your confirmation when other devices access your

data.

The colour of the icon indicates the status of the

device:

•

Grey for unpaired devices

Blue for paired devices

Bluetooth services: display available Bluetooth

services.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

•

Red for devices that are currently connected to

your phone

•

Authorise device/Unauthorise device:

determine if the phone asks you to permit

connection when other devices try to connect to

your phone.

3. Select a device.

4. Enter a Bluetooth PIN code of up to 16 digits and

press <OK>. This code is used just once and you

don’t need to memorise it.

•

Delete: delete the device.

Delete all: delete all devices.

When the owner of the other device enters the

same code, pairing is finished.

Sending data via Bluetooth

1. Activate the Bluetooth feature.

2. Select the application in which the item you want

to send is stored.

Some devices, especially headsets or hands-free

car kits, may have a fixed Bluetooth PIN, such as

0000. If the other device has one, you must enter

the code.

3. Scroll to the item you want and press <Options>.

4. Select Send

→

via Bluetooth.

Using device options

The phone searches for devices within range and

displays a list of available devices.

From the device list, press <Options> to access the

following options:

5. Select a device.

•

Connect: connect to the currently selected device.

You need to enter the Bluetooth PIN.

6. If necessary, enter the Bluetooth PIN needed for

pairing and press <OK>.

•

Disconnect: end the connection with the device.

Receiving data via Bluetooth

Browse files: search for data from the device and

import data directly to your phone.

To receive data via Bluetooth, your phone’s Bluetooth

feature must be active.

•

Rename: rename the paired device.

Download from Www.Somanuals.com. All Manuals Search And Download.

If an unauthorised Bluetooth device sends data to your

phone, the phone displays a confirmation message. To

receive data, press <Yes>.

Security (Menu 9.7)

Use this menu to protect the phone against

unauthorised use by managing the several access

codes of your phone and SIM card.

Infrared (Menu 9.6.2)

Use this feature to send and receive data through the

infrared port. To use an infrared connection, you must

do the following:

If you enter an incorrect PIN /PIN 2 three times in

succession, the SIM card is blocked. To unblock it

you need to enter your PUK/PUK2 (Personal

Unblocking Key). The codes are supplied by your

network operator.

•

Configure and activate an IrDA-compliant infrared

port on the other device.

Activate the infrared feature on your phone (the

PIN check (Menu 9.7.1)

IrDA icon

displays on the top line).

The 4-to 8-digit PIN (Personal Identification Number)

protects your SIM card against unauthorised use.

When this feature is enabled, the phone requires your

PIN each time it is switched on.

Align the IrDA port on the

phone with the IrDA port on

the other device.

If there is no communication

between your phone and the

other IrDA-compliant device

within 60 seconds of activating

the feature, it is automatically

deactivated.

Change PIN (Menu 9.7.2)

Use this menu to change your PIN. The PIN Check

feature must be enabled to use this feature.

Phone Lock (Menu 9.7.3)

The Phone Lock feature locks the phone from

unauthorised use.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

When this feature is enabled, you must enter a 4- to

8-digit phone password each time the phone is

switched on.

SIM Lock (Menu 9.7.6)

The SIM Lock feature allows your phone to work only

with the current SIM by assigning a SIM lock code. You

must enter the SIM lock code to use a different SIM

card.

The password is preset to 00000000. To change the

password, use the Change password menu.

FDN mode (Menu 9.7.7)

Change Password (Menu 9.7.4)

If supported by your SIM card, Fixed Dialing Number

(FDN) mode restricts your outgoing calls to a limited

set of phone numbers. When this feature is enabled,

you can make calls only to phone numbers stored in

Phonebook. To use this feature, you must enter your

PIN2.

Use this menu to change your phone password. The

password is preset to 00000000

Privacy (Menu 9.7.5)

Use this menu to lock your media contents, including

MMS messages, e-mails, images, videos, music files,

and sounds.

Change PIN2 (Menu 9.7.8)

1. Press [

] to check the item(s) to lock.

If supported by your SIM card, the Change PIN2

feature changes your current PIN2.

2. Press <Save> to lock the marked items.

3. Enter the phone password and press <OK>.

Memory status (Menu 9.8)

To access a locked item, you need to enter the phone

password.

Use this menu to check the amount of memory being

used for storing data in Shared Memory

Messages,

Funbox Organiser Phonebook, and Java world.

Download from Www.Somanuals.com. All Manuals Search And Download.

Reset settings (Menu 9.9)

Solve problems

Help and personal needs

Use this menu to reset the phone settings, display

settings, and sound settings individually. You can also

reset all the settings in your phone at the same time.

To save the time and expense of an unnecessary

service call, perform the simple checks in this section

before contacting a service professional.

1. Press [

be reset.

] to check the setting category(ies) to

2. Press <Reset> to reset the marked items.

3. Enter the phone password and press <OK>.

The password is preset to 00000000. You can

When you switch on your phone, the following

messages may appear:

“Insert SIM”

change this password

ꢀp. 84

•

Be sure that the SIM card is correctly installed.

“Phone lock”

The automatic locking function has been enabled.

•

You must enter the phone’s password before you

can use the phone.

“Enter PIN”

•

You are using your phone for the first time. You

must enter the PIN supplied with the SIM card.

•

The PIN Check feature is enabled. Every time the

phone is switched on, the PIN has to be entered.

To disable this feature, use the PIN check menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Solve problems

“Enter PUK”

Your correspondent cannot reach you

•

The PIN code has been entered incorrectly three

times in succession, and the phone is now blocked.

Enter the PUK supplied by your service provider.

•

Be sure your phone is switched on. ([ ] pressed

for more than one second.)

Be sure you are accessing the correct cellular

network.

“No Service,” “Network Failure,” or “Not

Done” displays

•

Be sure that you have not set an outgoing call

barring option.

The network connection has been lost. You may be

in a weak signal area. Move and try again.

Your correspondent cannot hear you speaking

•

You are trying to access an option for which you

have no subscription with your service provider.

Contact the service provider for further details.

Be sure you have switched off the microphone.

Be sure you are holding the phone close enough to

your mouth. The microphone is located at the

bottom of the phone.

You have entered a number but it was not

dialled

•

The phone starts beeping and “Battery low”

flashes on the display

•

Be sure that you have pressed [ ].

Be sure you have accessed the right cellular

network.

Your battery is insufficiently charged. Recharge the

battery.

•

Be sure that you have not set an outgoing call

barring option.

The audio quality of the call is poor

Check the signal strength indicator on the display

). The number of bars indicates the signal

strength from strong ( ) to weak ( ).

•

(

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Try moving the phone slightly or moving closer to a

window if you are in a building.

Health and safety information

SAR certification information

No number is dialled when you re-call a

Contacts entry

This phone meets European Union (EU) requirements

concerning exposure to radio waves.

•

Use the Contact Search feature to ensure the

number has been stored correctly.

Your mobile phone is a radio transmitter and receiver. It is

designed and manufactured to not exceed the limits for

exposure to radio-frequency (RF) energy, as

•

Re-store the number, if necessary.

If the above guidelines do not help you to

solve the problem, take note of:

recommended by the EU Council. These limits are part of

comprehensive guidelines and establish permitted levels

of RF energy for the general population. The guidelines

were developed by independent scientific organisations

through the periodic and thorough evaluation of scientific

studies. The limits include a substantial safety margin

designed to ensure the safety of all persons, regardless of

age and health.

•

The model and serial numbers of your phone

Your warranty details

A clear description of the problem

Then contact your local dealer or Samsung after-sales

service.

The exposure standard for mobile phones employs a unit

of measurement known as Specific Absorption Rate (SAR).

The SAR limit recommended by the EU Council is 2.0W/

kg.^*

The highest SAR value for this model phone was 0.310 W/

kg.

Download from Www.Somanuals.com. All Manuals Search And Download.

Health and safety information

SAR tests are conducted using standard operating

positions with the phone transmitting at its highest

certified power level in all tested frequency bands.

Although the SAR is determined at the highest certified

power level, the actual SAR level of the phone while

operating can be well below the maximum value. This is

because the phone is designed to operate at multiple

power levels so as to use only the power required to reach

the network. In general, the closer you are to a base

station, the lower the power output of the phone.

Precautions when using batteries

•

Never use a charger or battery that is damaged in any

way.

•

Use the battery only for its intended purpose.

If you use the phone near the network’s base station,

it uses less power. Talk and standby time are greatly

affected by the signal strength on the cellular network

and the parameters set by the network operator.

•

Battery charging time depends on the remaining

battery charge, the type of battery, and the charger

used. The battery can be charged and discharged

hundreds of times, but it will gradually wear out. When

the operation time is noticeably shorter than normal, it

is time to buy a new battery.

Before a new model phone is available for sale to the

public, compliance with the European R&TTE Directive

must be shown. This directive includes as one of its

essential requirements the protection of the health and

safety of the user and any other person.

•

If left unused, a fully charged battery will discharge

itself over time.

Use only Samsung-approved batteries, and recharge

your battery only with Samsung-approved chargers.

Disconnect the charger from the power source when it

is not in use. Do not leave the battery connected to a

charger for more than a week, since overcharging may

shorten its life.

The SAR limit for mobile phones used by the public is 2.0

watts/kilogram (W/kg) averaged over ten grams of body tis-

sue. The limit incorporates a substantial margin of safety to

give additional protection for the public and to account for any

variations in measurements. The SAR values may vary,

depending on national reporting requirements and the network

band.

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Extreme temperatures will affect the charging capacity

of your battery: it may require cooling or warming

first.

Do not leave the battery in hot or cold places because

the capacity and lifetime of the battery will be

reduced. Try to keep the battery at room temperature.

A phone with a hot or cold battery may not work

temporarily, even when the battery is fully charged. Li-

ion batteries are particularly affected by temperatures

below 0°C (32°F).

Road safety

Your wireless phone gives you the powerful ability to

communicate by voice, almost anywhere, anytime. But an

important responsibility accompanies the benefits of

wireless phones, one that every user must uphold.

When driving a car, driving is your first responsibility.

When using your wireless phone while driving, follow local

regulations in the country or region you are in.

•

Do not short-circuit the battery. Accidental short-

circuiting can occur when a metallic object like a coin,

clip or pen causes a direct connection between the +

and – terminals of the battery (metal strips on the

battery). For example, do not carry a spare battery in

a pocket or bag where the battery may contact metal

objects. Short-circuiting the terminals may damage

the battery or the object causing the short-circuiting.

Operating environment

Remember to follow any special regulations in force in the

area you are in, and always switch off your phone

whenever it is forbidden to use it, or when it may cause

interference or danger.

When connecting the phone or any accessory to another

device, read its user’s guide for detailed safety

instructions. Do not connect incompatible products.

Dispose of used batteries in accordance with local

regulations. Always recycle. Do not dispose of

batteries in a fire.

As with other mobile radio transmitting equipment, users

are advised that for the satisfactory operation of the

equipment and for the safety of personnel, it is

recommended that the equipment should only be used in

the normal operating position (held to your ear with the

antenna pointing over your shoulder).

Download from Www.Somanuals.com. All Manuals Search And Download.

Health and safety information

Other medical devices

Electronic devices

If you use any other personal medical devices, consult the

manufacturer of your device to determine if it is

adequately shielded from external RF energy.

Most modern electronic equipment is shielded from radio

frequency (RF) signals. However, certain electronic

equipment may not be shielded against the RF signals

from your wireless phone. Consult the manufacturer to

discuss alternatives.

Your physician may be able to assist you in obtaining this

information.

Switch off your phone in health care facilities when

regulations posted in these areas instruct you to do so.

Pacemakers

Pacemaker manufacturers recommend that a minimum

distance of 15 cm (6 inches) be maintained between a

wireless phone and a pacemaker to avoid potential

interference with the pacemaker. These recommendations

are consistent with the independent research and

recommendations of Wireless Technology Research. If you

have any reason to suspect that interference is taking

place, switch off your phone immediately.

Vehicles

RF signals may affect improperly installed or inadequately

shielded electronic systems in motor vehicles. Check with

the manufacturer or its representative regarding your

vehicle.

You should also consult the manufacturer of any

equipment that has been added to your vehicle.

Hearing aids

Posted facilities

Some digital wireless phones may interfere with some

hearing aids. In the event of such interference, you may

wish to consult your hearing aid manufacturer to discuss

alternatives.

Switch off your phone in any facility where posted notices

require you to do so.

Download from Www.Somanuals.com. All Manuals Search And Download.

Potentially explosive environments

Emergency calls

Switch off your phone when in any area with a potentially

explosive atmosphere, and obey all signs and instructions.

Sparks in such areas could cause an explosion or fire

resulting in bodily injury or even death.

This phone, like any wireless phone, operates using radio

signals, wireless, and landline networks as well as user-

programmed functions, which cannot guarantee

connection in all conditions. Therefore, you should never

rely solely on any wireless phone for essential

Users are advised to switch off the phone while at a

refuelling point (service station). Users are reminded of

the need to observe restrictions on the use of radio

equipment in fuel depots (fuel storage and distribution

areas), chemical plants, or where blasting operations are

in progress.

communications like medical emergencies.

To make or receive calls, the phone must be switched on

and in a service area with adequate signal strength.

Emergency calls may not be possible on all wireless phone

networks or when certain network services and/or phone

features are in use. Check with local service providers.

Areas with a potentially explosive atmosphere are often

but not always clearly marked. They include the areas

below decks on boats, chemical transfer or storage

facilities, vehicles using liquefied petroleum gas, such as

propane or butane, areas where the air contains chemicals

or particles, such as grain, dust or metal powders, and any

other area where you would normally be advised to turn

off your vehicle engine.

To make an emergency call:

1. Switch on the phone.

2. Key in the emergency number for your present

location. Emergency numbers vary by location.

3. Press [ ].

Certain features like Call Barring may need to be

deactivated before you can make an emergency call.

Consult this document and your local cellular service

provider.

Download from Www.Somanuals.com. All Manuals Search And Download.

Health and safety information

Other important safety information

Care and maintenance

•

Only qualified personnel should service the phone or

install the phone in a vehicle. Faulty installation or

service may be dangerous and may invalidate any

warranty applicable to the device.

Check regularly that all wireless phone equipment in

your vehicle is mounted and operating properly.

Do not store or carry flammable liquids, gases, or

explosive materials in the same compartment as the

phone, its parts, or accessories.

For vehicles equipped with an air bag, remember that

an air bag inflates with great force. Do not place

objects, including installed or portable wireless

equipment, in the area over the air bag or in the air

bag deployment area. Improperly installed wireless

equipment could result in serious injury if the air bag

inflates.

Switch off your phone before boarding an aircraft. It is

dangerous and illegal to use wireless phones in an

aircraft because they can interfere with the operation

of the aircraft.

Failure to observe these instructions may lead to the

suspension or denial of telephone services to the

offender, or legal action, or both.

Your phone is a product of superior design and

craftsmanship and should be treated with care. The

suggestions below will help you fulfill any warranty

obligations and allow you to enjoy this product for many

years.

•

Keep the phone and all its parts and accessories out of

the reach of small children.

•

Keep the phone dry. Precipitation, humidity, and

liquids contain minerals that corrode electronic

circuits.

•

Do not use the phone with a wet hand. Doing so may

cause an electric shock to you or damage to the

phone.

•

Do not use or store the phone in dusty, dirty areas, as

its moving parts may be damaged.

Do not store the phone in hot areas. High

temperatures can shorten the life of electronic

devices, damage batteries, and warp or melt certain

plastics.

•

Do not store the phone in cold areas. When the phone

warms up to its normal operating temperature,

moisture can form inside the phone, which may

damage the phone’s electronic circuit boards.

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Do not drop, knock, or shake the phone. Rough

handling can break internal circuit boards.

Do not use harsh chemicals, cleaning solvents, or

strong detergents to clean the phone. Wipe it with a

soft cloth slightly dampened in a mild soap-and-water

solution.

•

Do not paint the phone. Paint can clog the device’s

moving parts and prevent proper operation.

Do not put the phone in or on heating devices, such as

a microwave oven, stove, or radiator. The phone may

explode when overheated.

•

Use only the supplied or an approved replacement

antenna. Unauthorised antennas or modified

accessories may damage the phone and violate

regulations governing radio devices.

If the phone, battery, charger, or any accessory is not

working properly, take it to your nearest qualified

service facility. The personnel there will assist you, and

if necessary, arrange for service.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connection tone • 78

Conversion • 40

Creating messages

e-mail • 53

MMS • 48

SMS • 45

Creating organiser

anniversaries • 64

events • 63

language • 75

settings • 76

Diverting, calls • 78

DTMF tones, send • 27

Index

ABC mode, text input • 21

Active line • 80

Alarm • 39

Calculator • 40

Call costs • 30

Call records

dialled • 29

missed • 29

received • 29

Call time • 29

Caller group

creating • 32

managing • 32

Caller ID • 80

Calls

answering • 24

barring • 79

diverting • 78

holding • 25

redialling • 23

rejecting • 24

waiting • 79

Camera

E-mails

Answering

creating/sending • 53

deleting • 55

setting • 56

call • 24

second call • 26

Anykey answer • 76

Auto redial • 75

memos • 66

tasks • 64

viewing • 54, 55

Emergency calls • 91

Deleting

Backlight time, set • 76

Band selection • 80

Barring, calls • 79

Battery

FDN (Fixed Dialling Number)

mode • 84

Forwarding

e-mails • 54

MMS messages • 50

Funbox • 60

call records • 28

e-mails • 55

events • 65

memos • 67

charging • 7

missed alarms • 66

MMS messages • 49, 50

phonebook 33

photos • 73

low indicator • 8

precautions • 88

Bluetooth

receiving, data • 82

sending, data • 82

settings • 81

Games • 34

Greeting message • 75

photos • 67

videos • 70

SMS messages • 46

video clips • 74

Delivery reports, message •

47, 51

Dialled calls • 29

Display

CB (Cell Broadcast) messages •

Characters, enter • 21

Conference call • 27

Broadcast messages • 60

Browser, WAP • 42

Health and safety • 87

Holding, call • 25

Download from Www.Somanuals.com. All Manuals Search And Download.

downloaded items • 62

phonebook 34

scheduled events • 67

unpacking • 6

Phonebook

Icons, description • 10

Images, downloaded • 60

Inbox, messages

e-mail • 54

Names

copying • 31

deleting • 33

editing • 31

managing • 33

options • 31

entering • 21

searching • 30

Message tone • 77

Messages

cell broadcast • 60

Network band, select • 80

Network selection • 79

Network services • 78

MMS • 49

SMS • 45

e-mail • 53

greeting • 75

MMS • 48

SMS • 45

voice • 59

speed-dialling • 32

Infrared, connect • 83

International calls • 23

Internet • 42

Photos

Organiser • 62

Outbox, messages

e-mail • 55

MMS • 50

deleting • 73

taking • 67

viewing • 72

web • 59

Key tone volume • 77

Keypad tones

selecting • 77

sending • 26

Minute minder • 78

missed alarm events • 66

Missed calls • 29

MMS messages

creating/sending • 48

deleting • 49, 50

setting • 51

viewing • 49, 50

MP3 player • 36

Multi-party calls • 27

Music, downloaded • 61

Muting

PIN, change • 83

PIN2, change • 84

Power on/off tone • 77

Privacy • 84

SMS • 46

Own number • 33

Problems, solve • 85

Password

Language, select • 75

Last number, redial • 23

Locking

call barring • 79

phone • 84

Phone

Received calls • 29

Received messages

e-mail • 54

media contents • 84

phone • 83

SIM card • 84

care and maintenance •

display • 10

icons • 10

locking • 83

password • 84

resetting • 85

switching on/off • 8

MMS • 49

SMS • 45

Recording

videos • 70

voice memos • 38

Redialling

Loudspeaker • 25

Low battery indicator • 8

key tones • 26

microphone • 26

My name card • 33

Memory status

camera • 60

automatically • 75

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

manually • 23

Resetting phone • 85

Ringer

incoming calls • 77

messages • 77

Road safety • 89

Roaming • 79

Stopwatch • 41

Switching on/off

playing • 38

recording • 38

Voicemail server • 59

microphone • 26

phone • 8

Waiting call • 79

WAP browser

access • 42

bookmarks • 43

cache, clear • 43

World time • 39

Templates

MMS • 51

text • 59

Text input mode, change • 21

Text, enter • 21

Timer • 41

Safety

information • 87

Security, calls • 83

Sent messages

e-mail • 55

Tone

connect • 78

MMS • 49, 50

SMS • 46

SIM card

keypad • 77

message • 77

minute minder • 78

power on/off • 77

slide • 77

inserting • 7

locking • 84

Slide settings • 75

SMS messages

creating/sending • 45

deleting • 46

setting • 47

viewing • 45, 46

Sound settings • 77

Sounds, downloaded • 62

Speed-dial • 32

Videos

deleting • 74

playing • 73

recording • 70

Voice clarity, microphone • 26

Voice mail • 59

Voice memos

Download from Www.Somanuals.com. All Manuals Search And Download.

QSC Audio Speaker HPR0002 User Guide
Radio Shack Telephone ET 273 User Guide
Rangemaster Film Camera 63000 User Guide
Regency Indoor Fireplace G36D LP PROPANE User Guide
Renesas Network Card M34282T5 OPT User Guide
Samsung Bluetooth Headset WEP 300 User Guide
Samsung Printer SCX 4500W User Guide
Sears Air Compressor 91972633 User Guide
Sears Washer 1104779 User Guide
Senco Air Compressor PC2002 User Guide