Samsung CRT Television TXL 2791F User Guide

TXL2791F  
TXM2790F  
TXM3292F  
COLOR TELEVISION  
.............  
Ow ners  
Instructions  
AA68-01698B-00(ENG)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning! Im portant  
Safety Instructions  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT  
REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.  
This symbol indicates high voltage is present inside. It is  
dangerous to make any kind of contact with any inside part of  
this product.  
This symbol alerts you that important literature concerning  
operation and maintenance has been included with this product.  
Note to CATV system installer: This reminder is provided to call CATV system  
installers attention to Article 820-40 of the National Electrical Code (Section 54 of  
Canadian Electrical Code, Part I), that provides guidelines for proper grounding  
and, in particular, specifies that the cable ground shall be connected to the  
grounding system of the building as close to the point of cable entry as practical.  
Caution: FCC/CSA regulations state that any unauthorized changes or modifica-  
tions to this equipment may void the users authority to operate it.  
Caution: To prevent electric shock, match the wide blade of plug to the wide slot,  
and fully insert the plug.  
Attention: pour eviter les chocs electriques, introduire la lame le plus large de la  
fiche dans la borne correspondante de la prise et pousser jusquau fond.  
Important: One Federal Court has held that unauthorized recording of  
copyrighted TV programs is an infringement of U.S. copyright laws.  
Certain Canadian programs may also be copyrighted and any unauthorized  
recording in whole or in part may be in violation of these rights.  
To prevent damage which may result in fire or electric shock  
hazard, do not expose this appliance to rain or moisture.  
As an ENERGY STAR Partner,  
Samsung Electronics America, Inc. has determined that this product or product  
model meets the ENERGY STAR guidelines for energy efficiency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Thank You for Choosing Sam sung  
Thank you for choosing Samsung! Your new Samsung TV represents the latest in television  
technology. We designed it with easy-to-use on-screen menus and closed captioning capabili-  
ties, making it one of the best products in its class. We are proud to offer you a product that  
will provide convenient, dependable service and enjoyment for years to come.  
Im portant Safety Inform ation  
Always be careful when using your TV receiver. To reduce the risk of fire, electrical shock,  
and other injuries, keep these safety precautions in mind when installing, using, and  
maintaining your machine.  
Read all safety and operating instructions before operating your TV.  
Keep the safety and operating instructions for future reference.  
• Heed all warnings on the TV receiver and in the operating instructions.  
• Follow all operating and use instructions.  
• Unplug the TV receiver from the wall outlet before cleaning. Use a damp cloth; do not use  
liquid or aerosol cleaners.  
• Never add any attachments and/or equipment without approval of the manufacturer. Such  
additions can increase the risk of fire, electric shock, or other personal injury.  
• Do not use the TV receiver where contact with or immersion in water is a possibility, such as  
near bath tubs, sinks, washing machines, swimming pools, etc.  
• Do not place the TV on an unstable cart, stand, tripod, bracket, or  
table where it can fall. A falling TV can cause serious injury to a  
child or adult, and serious damage to the appliance. Use only with  
a cart, stand, tripod, bracket, or table recommended by the manu-  
facturer or sold with the TV. Follow the manufacturers instruc-  
tions when mounting the unit, and use a mounting accessory rec-  
ommended by the manufacturer. Move the TV and cart with care.  
Quick stops, excessive force, and uneven surfaces can make the  
unit and cart unsteady and likely to overturn.  
• Provide ventilation for the TV receiver. The unit is designed with  
slots in the cabinet for ventilation to protect it from overheating. Do not block these openings  
with any object, and do not place the TV receiver on a bed, sofa, rug, or other similar sur-  
face. Do not place it near a radiator or heat register. If you place the TV receiver on a rack or  
bookcase, ensure that there is adequate ventilation and that youve followed the manufactur-  
ers instructions for mounting.  
• Operate your TV receiver only from the type of power source indicated on the marking label.  
If you are not sure of the type of power supplied to your home, consult your appliance dealer  
or local power company.  
• Use only a grounded or polarized outlet. For your safety, this TV is equipped with a polarized  
alternating current line plug having one blade wider than the other. This plug will fit into the  
power outlet only one way. If you are unable to insert the plug fully into the outlet, try  
reversing the plug. If the plug still does not fit, contact your electrician to replace your outlet.  
SAFETY  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
• Protect the power cord. Power supply cords should be routed so that they wont be walked on  
or pinched by objects placed on or against them. Pay particular attention to cords at plugs, con-  
venience receptacles, and the point where they exit from the unit.  
• Unplug the TV from the wall outlet and disconnect the antenna or cable system during a light-  
ning storm or when left unattended and unused for long periods of time. This will prevent dam-  
age to the unit due to lightning and power-line surges.  
Avoid overhead power lines. An outside antenna system should not be placed in the vicinity of  
overhead power lines or other electric light or power circuits or where it can fall into such  
power lines or circuits. When installing an outside antenna system, be extremely careful to keep  
from touching the power lines or circuits. Contact with such lines can be fatal.  
• Do not overload the wall outlet or extension cords. Overloading can result in fire or electric  
shock.  
• Do not insert anything through the openings in the unit, where they can touch dangerous volt-  
age points or damage parts. Never spill liquid of any kind on the TV.  
• Ground outdoor antennas. If an outside antenna or cable  
EXAMPLE OF  
ANTENNA GROUNDING  
system is connected to the TV, be sure the antenna or  
ANTENNA  
LEAD IN WIRE  
cable system is grounded so as to provide some  
GROUND CLAMP  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
protection against voltage surges and built-up static  
charges. Section 810 of the National Electrical Code,  
ELECTRIC  
SERVICE  
EQUIPMENT  
GROUNDING  
CONDUCTORS  
(NEC SECTION 810-21)  
ANSI/NFPA No.70-1984, provides information about  
proper grounding of the mast and supporting structure,  
GROUND CLAMPS  
grounding of the lead-in wire to an antenna discharge  
unit, size of grounding conductors, location of antenna  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
discharge unit, connection to grounding electrodes, and  
NEC — NATIONAL ELECTRICAL CODE  
requirements for the grounding electrode.  
• Do not attempt to service the TV yourself. Refer all servicing to qualified service personnel.  
Unplug the unit from the wall outlet and refer servicing to qualified service personnel under the  
following conditions:  
- when the power-supply cord or plug is damaged  
- if liquid has been spilled on the unit or if objects have fallen into the unit  
- if the TV has been exposed to rain or water  
- if the TV does not operate normally by following the operating instructions  
- if the TV has been dropped or the cabinet has been damaged  
- when the TV exhibits a distinct change in performance  
• If you make adjustments yourself, adjust only those controls that are covered by the operating  
instructions. Adjusting other controls may result in damage and will often require extensive  
work by a qualified technician to restore the TV to normal.  
• When replacement parts are required, be sure the service technician uses replacement parts  
specified by the manufacturer or those that have the same characteristics as the original part.  
Unauthorized substitutions may result in additional damage to the unit.  
• Upon completion of any service or repairs to this TV, ask the service technician to  
perform safety checks to determine that the TV is in a safe operating condition.  
This device complies with part 15 of the FCC Rules. Operation is subject to the following  
two conditions:  
(1) This device may not cause harmful interference, and  
(2) This device must accept any interference that may cause undesired operation.  
This television receiver provides display of television closed captioning in accordance with  
§15.119 of the FCC rules.  
2
SAFETY  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CO NTENTS  
Chapter 1: Your New TV . . . . . . . . . . . . . . .1.1  
List of Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1  
Familiarizing Yourself with The TV. . . . . . . . . . . . . . . . . . . . . . . . . . 1.2  
Front Panel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2  
Front/Side Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3  
Rear Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.4  
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5  
Chapter 2: Installation . . . . . . . . . . . . . . . . 2.1  
Connecting VHF and UHF Antennas . . . . . . . . . . . . . . . . . . . . . . . . 2.1  
Antennas with 300-ohm Flat Twin Leads . . . . . . . . . . . . . . 2.1  
Antennas with 75-ohm Round Leads . . . . . . . . . . . . . . . . . 2.2  
Separate VHF and UHF Antennas. . . . . . . . . . . . . . . . . . . . 2.2  
Connecting Cable TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2  
Cable without a Cable Box . . . . . . . . . . . . . . . . . . . . . . . . . 2.2  
Connecting to a Cable Box that Descrambles  
All Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3  
Connecting to a Cable Box that Descrambles  
some Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3  
Connecting a VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.4  
Connecting an S-VHS VCR. . . . . . . . . . . . . . . . . . . . . . . . . 2.6  
Connecting a Second VCR to Record from the TV . . . . . . . 2.7  
Connecting a DVD Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.7  
Connecting a Camcorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.8  
Installing Batteries in the Remote Control. . . . . . . . . . . . . . . . . . . . . 2.9  
Chapter 3: Operation . . . . . . . . . . . . . . . . . . 3.1  
Turning the TV On and Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1  
Plug & Play Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1  
Viewing the Menus and On-Screen Displays. . . . . . . . . . . . . . . . . . . 3.3  
Viewing the Menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3  
Viewing the Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3  
Selecting a Menu Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.4  
Memorizing the Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5  
Selecting the Video Signal-source . . . . . . . . . . . . . . . . . . . . 3.5  
Storing Channels in Memory (Automatic Method) . . . . . . . 3.6  
Adding and Erasing Channels (Manual Method) . . . . . . . . 3.7  
Changing Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.8  
Using the Channel Buttons. . . . . . . . . . . . . . . . . . . . . . . . . 3.8  
Directly Accessing Channels. . . . . . . . . . . . . . . . . . . . . . . . 3.8  
Using the PRE-CH Button to select the Previous Channel. . 3.8  
Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.8  
Using Mute. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.8  
Labeling the Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.9  
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.10  
Option 1: Setting the Clock Manually . . . . . . . . . . . . . . . . 3.10  
Option 2: Using the Local PBS Channel to  
Automatically Set the TV Clock . . . . . . . . . . . . . . . . . . . . . 3.11  
Customizing the Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.13  
Using Automatic Picture Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.14  
Customizing the Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.15  
Using Automatic Sound Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.16  
Setting The On/Off Melody. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.17  
Viewing a VCR or Camcorder Tape. . . . . . . . . . . . . . . . . . . . . . . . . . 3.18  
CONTENTS  
CONTENTS  
1
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
CO NTENTS  
Chapter 4: Special Features . . . . . . . . . . . . 4.1  
Customizing Your Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1  
Setting Up Your Remote Control to Operate Your VCR. . . . 4.1  
Setting Up Your Remote Control to  
Operate Your Cable Box . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3  
Fine Tuning Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.4  
Digital Noise Reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5  
Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.6  
Changing the Screen Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.7  
Using the R.Surf Feature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.8  
Setting the On/Off Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.9  
Setting the Sleep Timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.10  
Sound Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.11  
Choosing a Multi-Channel Sound (MTS) Soundtrack. . . . . 4.11  
Extra sound settings  
(Turbo Sound, Surround, or Auto Volume) . . . . . . . . . . . . 4.12  
Viewing Closed Captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.13  
Using the V-Chip (Only USA). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.14  
Setting Up Your Personal ID Number (PIN) . . . . . . . . . . . . 4.14  
How to Enable/Disable the V-Chip . . . . . . . . . . . . . . . . . . . 4.15  
How to Set up Restrictions Using the “TV guidelines” . . . . 4.15  
How to Set up Restrictions using the MPAA Ratings:  
G, PG, PG-13, R, NC-17, X . . . . . . . . . . . . . . . . . . . . . . . . 4.17  
How to Reset the TV after the V-Chip Blocks  
a Channel (Emergency Escape”) . . . . . . . . . . . . . . . . . . . . 4.18  
Chapter 5: Troubleshooting . . . . . . . . . . . . 5.1  
Identifying Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.1  
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . A.1  
Cleaning and Maintaining Your TV. . . . . . . . . . . . . . . . . . . . . . . . . . A.1  
Using Your TV in Another Country . . . . . . . . . . . . . . . . . . . . . . . . . A.1  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A.1  
2
CONTENTS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ch a p t e r O n e  
YO UR NEW TV  
List of Features  
Your TV was designed with the latest technology. This TV is a high-performance unit that  
includes the following special features:  
• Easy-to-use remote control  
• Easy-to-use on-screen menu system  
Automatic timer to turn the TV on and off  
Adjustable picture and sound settings that can be stored in the TVs memory  
Automatic channel tuning for up to 181 channels  
• A special filter to reduce or eliminate reception problems  
• Fine tuning control for the sharpest picture possible  
• A built-in multi-channel sound decoder for stereo and bilingual listening  
Built-in, dual channel speakers  
• A special sleep timer  
• Headphone jack for private listening  
• 16:9 letter box format available depending upon source  
CHAPTER ONE: YOUR NEW TV 1.1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
YO UR NEW TV  
Fam iliarizing Yourself w ith The TV  
Front Panel Buttons  
The buttons on the front panel control your TVs basic features, including the on-screen  
menu. To use the more advanced features, you must use the remote control.  
For model TXL2791F  
For model TXM2790F  
For model TXM3292F  
Œ
´
TV/ VIDEO (TXM3292F)  
Press to change between viewing TV programs  
and signals from other components.  
ˆ
Ø
Rem ote Control Sensor  
Aim the remote control towards this spot on the  
TV.  
MENU  
Press to see an on-screen menu of your TV's fea-  
tures.  
POWER & TIMER indicator  
When the TV is turned on, the POWER & TIMER  
indicator blinks ten times. This indicator illumi-  
nates when the TIMER mode is set to the “On”  
position after setting the clock and either the On  
timer or Off timer, with the remote control.  
Even if the power is turned off, this indicator  
stays lit. (Clock must be set before using this  
function.)  
ˇ
¨
VOL – , + (Volum e)  
Press to increase or decrease the  
volume. Also used to select items on the on-  
screen menu.  
CH M and CH MM(Channel)  
Press to change channels. Also press to highlight  
various items on the on-screen menu.  
POWER  
Press to turn the TV on and off.  
1.2  
CHAPTER ONE: YOUR NEW TV  
Download from Www.Somanuals.com. All Manuals Search And Download.  
YO UR NEW TV  
Front/ Side Panel J acks  
You can use the front/Side panel jacks to connect an A/V component that is used only  
occasionally, such as a camcorder or video game. (For information on connecting equip-  
ment, see pages 2.1 2.8.)  
For model TXM2790F  
For model TXL2791F For model TXM3292F  
Œ
´
AUDIO INPUTS  
Used to connect the audio signals from a cam-  
corder or video game.  
ˇ
S-VIDEO INPUT jack  
(TXM3292F)  
Used to connect an S-Video signal from a cam-  
corder or a video game.  
VIDEO INPUT  
Used to connect a video signal from a camcorder  
or a video game.  
¨
HEADPHONE J ACK  
Connect a set of external headphones to this jack  
for private listening.  
CHAPTER ONE: YOUR NEW TV 1.3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
YO UR NEW TV  
Rear Panel J acks  
Use the rear panel jacks to connect an A/V component that will be connected  
continuously, such as a VCR or a laserdisc player.  
Because there are two sets of input jacks, you can connect two different A/V components  
(i.e., a VCR and a laserdisc, 2 VCRs, etc.)  
For more information on connecting equipment, see pages 2.1 2.8.  
Œ
´
VIDEO INPUT jack  
Video signals from VCRs, DVD  
players and similar devices.  
¨
ˆ
Ø
SUPER VIDEO INPUT jack  
(For m odels TXL2791F/  
TXM3292F)  
S-Video signal from an S-VHS VCR or DVD player.  
AUDIO INPUTS(INPUT1 and 2)/  
DVD AUDIO INPUTS(INPUT 2)  
Audio signals from VCRs, DVD players and similar  
devices.  
DVD VIDEO INPUT jacks  
Connect video from a DVD player.  
Note: Only black and white signals are output  
from a monitor in DVD mode.  
Use these jacks to connect the audio signals  
from a DVD player when using the DVD video  
input jacks. When not using the DVD jacks, these  
audio jacks function as audio for Video 2 or S-  
VIDEO).  
VHF/ UHF  
Connect to an antenna or to a cable TV system.  
ˇ
AUDIO-VIDEO MONITOR  
OUTPUT jacks  
These audio-video signals are identical to A/V  
signals being displayed on the big screen.  
(Typically used as the input signals for a record-  
ing VCR.)  
1.4  
CHAPTER ONE: YOUR NEW TV  
Download from Www.Somanuals.com. All Manuals Search And Download.  
YO UR NEW TV  
Rem ote Control  
You can use the remote control up to about 23 feet from the TV. When using the remote,  
always point it directly at the TV.  
You can also use your remote control to operate your VCR and cable box. See page 4.1 for  
details.  
Note: The buttons that are not described below do not function.  
Œ
´
POWER  
Turns the TV on and off.  
˝ TV  
Press to use your remote control  
to operate your TV.  
Num ber buttons  
Press to select channels directly  
on the TV.  
VCR  
Press to use your remote control  
to operate your VCR.  
+100  
Press to select channels over 100.  
For example, to select channel  
121, press “+100,” then press “2”  
and “1.”  
CABLE  
Press to use your remote control  
to operate a cable box.  
SET  
ˇ
¨
P.SIZE  
Press to change the screen size.  
Use this button when you are set-  
ting up your remote control to  
operate your VCR or cable box.  
R.SURF  
Press the R.SURF button to auto-  
matically return to a preferred  
channel after a user-preset time  
delay.  
Ô
PRE-CH  
Tunes to the previous channel.  
MTS (Multichannel  
Television Stereo)  
Press to choose stereo, mono or  
Separate Audio Program (SAP  
broadcast).  
ˆ
Ø
SLEEP  
Press to select a preset time inter-  
val for automatic shutoff.  
TURBO  
Press to turn the TURBO sound On  
or Off.  
Ò
Ú
DISPLAY  
Press to see the time, channel,  
etc., on-screen. Also press to exit  
(quit) the menu system.  
MUTE  
Press to temporarily cut off the  
sound.  
VOL -, VOL  
+
Press to increase or decrease the  
volume. (Also used to make selec-  
tions on the on-screen menus.)  
CHand CHꢀ  
(Channel Up/ Dow n)  
Press CHor CHto change  
channels. (Also used to highlight  
selections on the on-screen  
menus.)  
Æ
ı
MENU  
Displays the main on-screen  
menu.  
TV/ VIDEO  
P.STD  
Press to display all of the  
available video sources (i.e.,  
Antenna/cable, VCR).  
Adjust the TV picture by selecting  
one of the preset factory settings  
(or select your personal, cus-  
tomized picture settings).  
For models TXL2791F/TXM3292F  
CHAPTER ONE: YOUR NEW TV 1.5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
YO UR NEW TV  
Rem ote Control  
˜
VCR Controls  
REW (Rew ind)  
Press to rewind a tape in your  
VCR.  
STOP  
Press this button to stop a tape  
during play, record, rewind or  
fast forward. If the button is  
pressed during Full-Automatic  
play, the function will be can-  
celled.  
PLAY  
Press the PLAY button to play  
back prerecorded tapes.  
F. F  
Press to fast forward the tape in  
your VCR.  
PAUSE  
Press to pause your VCRs tape.  
For models TXL2791F/TXM3292F  
1.6  
CHAPTER ONE: YOUR NEW TV  
Download from Www.Somanuals.com. All Manuals Search And Download.  
YO UR NEW TV  
Rem ote Control  
Œ
´
POWER  
Turns the TV on and off.  
SLEEP  
Press to select a preset time inter-  
val for automatic shutoff.  
Num ber buttons  
Press to select channels directly  
on the TV.  
MTS (Multichannel  
Television Stereo)  
Press to choose stereo, mono or  
Separate Audio Program (SAP  
broadcast).  
ˇ
+100  
Press to select channels over 100.  
For example, to select  
channel 121, press +100,then  
press 2and 1.”  
˝
V.CHIP(Only USA)  
Press to set up and activate the  
parental locks.  
¨
ˆ
MUTE  
Press to temporarily cut off  
the sound.  
Ô
PRE-CH  
Tunes to the previous channel.  
CHMMand CHM  
(Channel Up/ Dow n)  
Press CHM or CHM to change  
channels. (Also used to highlight  
selections on the on-screen  
menus.)  
DISPLAY  
Press to see the time, channel,  
etc., on-screen. Also press to exit  
(quit) the menu system.  
Ò
Ú
VOL -, VOL  
+
Ø
TV/ VIDEO  
Press increase or decrease the  
volume. (Also used to make selec-  
tions on the on-screen menus.)  
Press to display all of the  
available video sources (i.e.,  
Antenna/cable, VCR).  
MENU  
Displays the main on-screen  
menu.  
R.SURF  
Press the R.SURF button to auto-  
matically return to a preferred  
channel after a user-preset time  
delay.  
For model TXM2790F  
CHAPTER ONE: YOUR NEW TV 1.7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
Ch a p t e r Tw o  
INSTALLATIO N  
Connecting VHF and UHF Antennas  
If your antenna has a set of leads that  
look like this, see “Antennas with  
300-ohm Flat Twin Leads,” below.  
If your antenna has one lead that looks  
like this, see “Antennas with 75-ohm  
Round Leads,” on page 2.2.  
If you have two antennas, see “Separate  
VHF and UHF Antennas,” on page 2.2.  
Antennas w ith 300-ohm Flat Tw in Leads  
If you are using an off-air antenna (such as a roof antenna or rabbit ears) that has  
300-ohm twin flat leads, follow the directions below.  
1
Place the wires from the  
twin leads under the  
screws on the 300-75 ohm  
adaptor (not supplied).  
Use a screwdriver to  
tighten the screws.  
2
Plug the adaptor into the  
VHF/UHF terminal on the  
bottom of the back panel.  
2.1  
CHAPTER TWO: INSTALLATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIO N  
Antennas w ith 75-ohm Round Leads  
1
Plug the antenna lead into  
the VHF/UHF  
terminal on the bottom of  
the back panel.  
Separate VHF and UHF Antennas  
If you have two separate antennas for your TV (one VHF and one UHF), you must  
combine the two antenna signals before connecting the antennas to the TV. This  
procedure requires an optional combiner-adaptor (available at most electronics shops).  
1
Connect both antenna  
leads to the combiner.  
2
Plug the combiner into the  
VHF/UHF terminal on the  
bottom of the rear panel.  
Connecting Cable TV  
To connect to a cable TV system, follow the instructions below.  
Cable w ithout a Cable Box  
Because this TV is  
1
cable-ready, you do not need a  
cable box to view unscrambled cable  
channels.  
Plug the incoming cable  
into the VHF/UHF  
antenna terminal on back  
of the TV.  
CHAPTER TWO: INSTALLATION  
2.2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIO N  
Connecting to a Cable Box that Descram bles All Channels  
This terminal might be labeled  
“ANT OUT,” “VHF OUT,” or simply,  
“OUT.”  
1
Find the cable that is con-  
nected to the ANTENNA  
OUT terminal on your  
cable box.  
2
Connect the other end of  
this cable to the VHF/UHF  
antenna  
terminal on the back of  
the TV.  
Connecting to a Cable Box that Descram bles Som e Channels  
If your cable box descrambles only some channels (such as premium channels), follow the  
instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of  
coaxial cable. (These items are available at most electronics stores.)  
This terminal might be labeled  
ANT IN,” “VHF IN,or simply,  
IN.”  
1
Find and disconnect the  
cable that is connected to  
the ANTENNA IN  
terminal on your  
cable box.  
2
Connect this cable to a  
two-way splitter.  
3
Connect a coaxial cable  
between an OUTPUT ter-  
minal on the splitter and  
the IN terminal on the  
cable box.  
2.3  
CHAPTER TWO: INSTALLATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIO N  
4
Connect a coaxial cable  
between the ANTENNA  
OUT terminal on the cable  
box and the B–IN terminal  
on the A/B switch.  
5
Connect another cable  
between the other OUT  
terminal on the splitter  
and the AIN terminal on  
the RF (A/B) switch.  
6
Connect the last coaxial  
cable between the OUT  
terminal on the RF (A/B)  
switch and the VHF/UHF  
terminal on the rear of the  
TV.  
After youve made this connection, set the A/B switch to the Aposition for normal viewing.  
Set the A/B switch to the Bposition to view scrambled channels. (When you set the A/B  
switch to B,you will need to tune your TV to the cable boxs output channel, which is usu-  
ally channel 3 or 4.)  
Connecting a VCR  
These instructions assume that you have already connected your TV to an antenna or a cable  
TV system (according to the instructions on pages 2.1-2.3). Skip step 1 if you have not yet  
connected to an antenna or a cable system.  
1
Unplug the cable or  
antenna from the back of  
the TV.  
2
Connect the cable or  
antenna to the  
ANTENNA IN terminal on  
the back of the VCR.  
CHAPTER TWO: INSTALLATION  
2.4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIO N  
3
Connect a coaxial cable  
between the ANTENNA  
OUT terminal on the VCR  
and the antenna  
terminal on the TV.  
A coaxial cable is usually included with a VCR. (If not, check your local electronics  
store).  
4
Connect a set of audio  
cables between the  
AUDIO OUT jacks on the  
VCR and the AUDIO jacks  
on the TV.  
If you have a mono(non-stereo) VCR, use the Y-connector (not supplied) to hook up  
to the left and right audio input jacks of the TV. If your VCR is stereo, you must con-  
nect two cables.  
5
Connect a video cable  
between the VIDEO OUT  
jack on the VCR and the  
VIDEO jack on the TV.  
Follow the instructions in Viewing a VCR or Camcorder Tapeto view your VCR tape.  
Note: This figure shows the Standard Connector-jack panel. The actual configuration on your  
TV may be different, depending on the model.  
2.5  
CHAPTER TWO: INSTALLATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIO N  
Connecting an S-VHS VCR  
(For m odels TXL2791F/ TXM3292F)  
Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR.  
(This connection delivers a better picture as compared to a standard VHS VCR.)  
1
To begin, follow steps  
13 in the previous  
section to connect the  
antenna or cable to your  
VCR and your TV.  
2
Connect a set of audio  
cables between the  
AUDIO OUT jacks on the  
VCR and the 2 AUDIO  
INPUT jacks on the TV.  
Make sure the jacks you are using are underneath the number 2.”  
3
Connect an S-video cable  
between the S-VIDEO OUT  
jack on the VCR and the  
S-VIDEO INPUT jack on  
the TV.  
An S-video cable is usually included with an S-VHS VCR. (If not, check your local  
electronics store.)  
CHAPTER TWO: INSTALLATION  
2.6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIO N  
Connecting a Second VCR to Record from the TV  
Your TV can send out signals of its picture and sound to be recorded by a second VCR.  
To do this, connect your second VCR as follows:  
1
Connect a set of audio  
cables between the  
AUDIO OUT jacks on the  
TV and the AUDIO IN  
jacks on the VCR.  
(The VCR input jacks might be either on the front or on back of the VCR.)  
2
Connect a video cable  
between the VIDEO OUT  
jack on the TV and the  
VIDEO IN jack on the VCR.  
Refer to your VCRs instructions for more information about how to record using this kind  
of connection.  
Connecting a DVD Player  
The rear panel jacks on your TV make it easy to connect a DVD player to your TV.  
1
Connect a set of audio  
cables between the  
AUDIO INPUT 2 jacks on  
the TV and the AUDIO  
OUT jacks on the DVD  
player.  
2
Connect a video cable  
between the DVD-IN (Y,  
Pb, Pr) jacks on the TV  
and the DVD-OUT (Y, Pb,  
Pr) jacks on the DVD  
player.  
Note: For an explanation  
of Component video, see  
your DVD player's  
owner's manual.  
2.7  
CHAPTER TWO: INSTALLATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIO N  
Connecting a Cam corder  
The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow  
you to view the camcorder tapes without using a VCR. (Also see Viewing a VCR or  
Camcorder Tapeon page 3.18)  
1
Locate the A/V output  
jacks on the camcorder.  
They are usually found on  
the side or back of the  
camcorder.  
2
Connect an audio cable  
between the AUDIO OUT-  
PUT jack on the cam-  
corder and the AUDIO  
terminals on the side of  
the TV.  
3
Connect a video cable  
between the VIDEO OUT-  
PUT jack on the cam-  
corder and the VIDEO ter-  
minal on the side of the  
TV.  
The audio-video cables shown here are usually included with a Camcorder. (If not, check  
your local electronics store.) If your camcorder is stereo, you need to connect a set of two  
cables.  
Note: This figure shows the Standard Connector-jack panel. The actual configuration on your TV  
may be different, depending on the model.  
CHAPTER TWO: INSTALLATION  
2.8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIO N  
Installing Batteries in the Rem ote Control  
1
Slide the cover out com-  
pletely.  
Make sure to match the +and  
2
ends of the batteries with the  
Install two AA size  
batteries.  
diagram inside the compartment.  
Remove the batteries and store  
them in a cool, dry place if you wont  
be using the remote control for a  
long time.  
3
Replace the cover.  
The remote control can be used up  
to about 23 feet from the TV.  
(Assuming typical TV usage, the  
Batteries last for about one year.)  
2.9  
CHAPTER TWO: INSTALLATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ch a pterTh r e e  
OPERATIO N  
Turning the TV On and Off  
Press the POWER button.  
You can also use the POWER button on the front panel.  
Plug & Play Feature  
When the TV is initially powered On, five basic customer settings proceed automatically  
and subsequently: Setting the language, Video signal source, Ant. input check, Auto pro-  
gram and Clock.  
1
Press the POWER button  
on the remote control.  
The message “Plug &  
Play” is displayed.  
It flickers for a little while  
and then the “Language”  
menu is automatically dis-  
played.  
2
Press the VOL+ or VOL-  
button to select the  
desired language.  
Press the MENU button to  
enter the language, and  
then the Channel” menu  
is automatically displayed.  
3
Press the VOL+ or VOL-  
button to select the  
desired video signal  
source.  
Press the MENU button to  
enter the video signal  
source, and then the “Ant.  
Input check” is automati-  
cally displayed.  
continued...  
CHAPTER THREE: TV OPERATION  
3.1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
4
Make sure that the anten-  
na is connected to the TV.  
And then Press the VOL+  
or VOL- button to activate  
"Auto Program" or press  
the MENU button to skip.  
(refer to “Auto program”  
on page 3.6.)  
5
Press the VOL+ or VOL-  
button to move to the hour  
or minute. Set the hour or  
minute by pressing the  
CHor CHbutton.  
(refer to “Setting the  
clock” on page 3.10.)  
6
When you have finished,  
press the MENU button.  
The message “Enjoy your  
watching” is displayed.  
7
If you want to reset this  
feature  
(1)Press the MENU but-  
ton.  
(2) Press the CHbutton  
three times to select  
the Function menu and  
press the VOL+ button.  
(3)Press the CHbutton  
to select Plug & Play  
and press the VOL+  
button.  
The message “Plug &  
Play” is displayed.  
Note: Plug & Play feature doesnt work when the V-chip  
on or when in the A/V mode.  
3.2  
CHAPTER THREE: TV OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
View ing the Menus and On-Screen Displays  
View ing the Menus  
The on-screen menus disappear  
from the screen after thirty seconds.  
1
With the power on, press  
the MENU button.  
The main menu appears  
on the screen. Its left side  
has four icons: Picture,  
Sound, Channel, and  
Function.  
You can also use the MENU,  
CHANNEL, and VOLUME buttons  
on the control panel of the TV to  
make selections.  
2
Use the CHand CHbuttons to highlight one of the 4 icons.  
Then press the VOL+ button to access the icons sub-menu.  
3
Press the MENU button to exit.  
View ing the Display  
The display identifies the current channel and the status  
of certain audio-video settings.  
The on-screen displays  
1
disappear after ten seconds.  
Press the DISPLAY  
button on the remote con-  
trol.  
The on-screen display  
shows any or all of the fol-  
lowing: Active channel,  
the channel label, video  
source, the time, and the  
time remaining on the  
sleep timer.  
(“*” indicates a channel  
has been manually fine  
tuned.)  
CHAPTER THREE: TV OPERATION  
3.3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
Selecting a Menu Language  
1
Press the MENU button to  
display the menu.  
Press the CH button  
three times to select  
Function.”  
2
Press the VOL + button to  
display the “Function”  
menu.  
3
Press the VOL + button to select the appropriate language:  
English, Spanish, or French.  
4
Press the MENU button twice to exit.  
3.4  
CHAPTER THREE: TV OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
Mem orizing the Channels  
Your TV can memorize and store all of the available channels for both “off-air” (antenna)  
and cable channels. After the available channels are memorized, use the CH and  
CH buttons to scan through the channels. This eliminates the need to change chan-  
nels by entering the channel digits. There are three steps for memorizing channels:  
selecting a broadcast source, memorizing the channels (automatic) and adding and  
deleting channels (manual).  
Selecting the Video Signal-source  
Before your television can begin memorizing the available channels, you must specify  
the type of signal source that is connected to the TV (i.e., an antenna or a cable system).  
1
Press the MENU button to  
display the menu.  
2
Press the CH button  
two times to select  
Channel.”  
3
Press the VOL + button.  
The first line of the menu  
is selected.  
4
Repeatedly press the VOL  
+ button to cycle through  
these choices:  
ANT (antenna) STD, HRC  
or IRC (all cable TV).  
Note: STD, HRC and IRC identify various types of cable TV  
systems. Contact your local cable company to identify the type  
of cable system that exists in your particular area.  
At this point the signal source has been selected. Proceed to  
“Storing Channels in Memory” (next page).  
CHAPTER THREE: TV OPERATION  
3.5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
Storing Channels in Mem ory (Autom atic Method)  
1
First, select the correct  
signal source (ANT, STD,  
HRC, IRC). See steps 1~4  
on previous page.  
Press the MENU button,  
then press the CH but-  
ton twice to select  
Channel.”  
Press the VOL + button to  
access the Channel sub-  
menu.  
2
Press the CH button to  
select “Auto program”.  
The TV automatically cycles  
through all of the available channels  
and stores them in memory. This  
takes about one to two minutes.  
3
Press the VOL + button.  
The TV will begin  
memorizing all of the  
available channels.  
Press MENU at any time to interrupt  
the memorization process and return  
to the Channel menu.  
4
After all the available  
channels are stored, the  
Auto program menu reap-  
pears. Press the MENU  
button twice to exit.  
Note: Channel auto program does not function when the  
V-chip is active.  
3.6  
CHAPTER THREE: TV OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
Adding and Erasing Channels (Manual Method)  
1
Press the MENU button ,  
then press the CH but-  
ton twice to select  
Channel”.  
Press the VOL+ button to  
access the channel sub-  
menu.  
2
Press the CH or CH ꢀ  
button to select  
Add/Erase”.  
Press the VOL+ button.  
3
Press the VOL+ button.  
Press the CH /button  
or the number buttons to  
select the channel you  
want to add or erase.  
Press the MENU button.  
4
Press the CH or CH ꢀ  
button to select “Select”.  
Press the VOL+ or VOL-  
button to select “Added”  
or “Erased”.  
Press the MENU button  
three times to exit.  
CHAPTER THREE: TV OPERATION  
3.7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
Changing Channels  
Using the Channel Buttons  
1
Press the CH or CH button to change channels.  
When you press CH or CH , the TV changes channels in sequence. You will  
see all the channels that the TV has memorized. (The TV must have memorized  
at least three channels.) You will not see channels that were either erased or not  
memorized.  
Directly Accessing Channels  
Use the number buttons to quickly tune to any channel.  
1
Press the number buttons to go directly to a channel.  
For example, to select channel 27, press “2,” then “7.”  
The TV will change channels when you press the  
second number.  
When you use the number buttons, you can directly select channels that were  
either erased or not memorized.  
To select a channel over 100, press the +100 button. (For channel 122, press  
“+100,” then “2,” then “2.”)  
To change to single-digit channels (0–9) faster, press “0” before the  
single digit. (For channel “4,” press “0,” then “4.”)  
Using the PRE-CH Button to select the Previous Channel  
To quickly switch between two  
1
channels that are far apart, tune to  
one channel, then use the number  
button to select the second channel.  
Then, use the PRE-CH button to  
quickly alternate between them.  
Press the PRE-CH button.  
The TV will switch to the last channel viewed.  
Adjusting the Volum e  
Press VOL + or VOL to increase or decrease the volume.  
Using Mute  
At any time, you can temporarily cut off the sound using the Mute button.  
1
Press the MUTE button and the sound cuts off.  
The word “Mute” will appear in the lower-left corner of the  
screen.  
2
To turn mute off, press the MUTE button again, or simply press  
either the VOL – or VOL + button.  
3.8  
CHAPTER THREE: TV OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
Labeling the Channels  
Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”,  
“PBS2, CNN1”, etc.) A label consists of four fields, where each field is a letter, a num-  
ber, “*”, or a blank. When the DISPLAY button is pressed, the channel label will appear  
next to the channel number.  
1
Press the CH or CH button  
to tune to the channel that will  
be labeled.  
Note: You cannot select  
2
“Labeling” in the A/V mode.  
Press the MENU button to dis-  
play the menu.  
Press the CH button twice to  
select “Channel”.  
Press the VOL + button.  
3
Press the CH button five  
times to select “Labeling”.  
Press the VOL + button to begin  
labeling. The left-most field will  
be highlighted.  
(Each label has four fields. See  
top paragraph.)  
4
Press the CH or CH button  
to select a letter, a number, “*”,  
or a blank. (Pressing the CH ꢀ  
button results in this sequence:  
A,B,...Z,*, blank,0,1,...9).  
5
Press the VOL+ button to switch  
to the next field, which will be  
highlighted. Select a second let-  
ter or digit using the CH and  
CH buttons, as above.  
Repeat the process to select the  
last two digits.  
Press the MENU button twice to set the label and clear the  
menus from the screen.  
CHAPTER THREE: TV OPERATION  
3.9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
Setting the Clock  
Setting the clock is necessary in order to use the various timer features of the TV. Also,  
you can check the time while watching the TV. (Just press Display.)  
Option 1: Setting the Clock Manually  
1
Press the MENU button to  
display the on-screen  
menu.  
Press the CH button  
three times to select  
Function.”  
Press the VOL + button.  
2
Press the CH button  
three times to select Time  
menu.  
Press the VOL + button:  
The Time menu will appear  
on the screen, and “Clock”  
will be highlighted.  
When selecting the hours, be sure  
to select the proper time of day (AM  
or PM).  
3
Press the VOL + button  
again (the hours digits will  
be highlighted).  
You can change the hours by pressing  
CH or CH repeatedly (or by  
holding down either of these buttons).  
Press the CH or CH ꢀ  
button repeatedly until the  
correct hour appears.  
After the hour is entered,  
press the VOL + button. (at  
this point the minutes dig-  
its will be highlighted).  
The time will appear every time  
you press the DISPLAY button.  
4
Press the CH or CH ꢀ  
button to select the cor-  
rect minutes.  
After selecting the correct  
minutes, press the VOL +  
button.  
Press the MENU button  
three times to exit.  
3.10  
CHAPTER THREE: TV OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
Option 2: Using the Local PBS Channel to Autom atically Set the  
TV Clock  
1
Press the MENU button to  
display the menu.  
Press the CH button  
three times to select  
Function.”  
Press the VOL + button.  
2
Press the CH button  
four times to select “Auto  
clock set” menu.  
Press the VOL + button.  
3
Press the VOL + button to  
select Auto clock set  
On”.  
4
Press the CH button to  
select “PBS channel”.  
While “PBS channel” is  
selected, press the VOL +  
button to activate the  
channel-number field.  
Press the CH and CH ꢀ  
button to select your local  
PBS channel.  
Press the MENU button.  
continued...  
CHAPTER THREE: TV OPERATION  
3.11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
5
Press the CH button to  
select “Time zone”. While  
Time zone” is selected,  
press either VOL+ or VOL-  
button to change the Time  
zone.  
Sequence: ATL., EAST,  
CEN., MTN., PAC., ALAS.,  
HAW.  
6
Press the CH button to  
select “DST(Daylight  
saving time). While “DST”  
is selected, press the  
VOL+ or VOL- button to  
indicate “Yes” or “No”.  
The clock is set.  
Press the MENU button  
three times to exit.  
3.12  
CHAPTER THREE: TV OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
Custom izing the Picture  
You can use the on-screen menus to change the contrast, brightness, tint, color, and  
sharpness according to personal preference. (Alternatively, you can use one of the  
“automatic” settings. See next page.)  
1
Press the MENU button to  
display menu.  
The customer can select  
Normal, “Warm”, or “Cool” accord-  
ing to personal preference.  
2
Press the VOL – or VOL +  
button repeatedly, until the  
word “Custom” is selected.  
(When Custom is highlight-  
ed, the words “Adjust” will  
appear on the screen.)  
3
Press the CH ꢀꢀ button to  
select “Adjust”, then  
press the VOL+ button.  
(The words Contrast,  
Brightness, Sharpness,  
Color, and Tint will appear  
on the screen.)  
Press the CH or CH ꢀ  
button to select a particu-  
lar item.  
After adjusting an item, the gauge  
will automatically disappear (after  
about 5 seconds).  
4
Press the VOL – or VOL +  
button to increase or  
decrease the value of a  
particular item. For exam-  
ple, if you select  
“Brightness,” pressing the  
VOL + button increases it.  
Press the MENU button  
four times to exit.  
CHAPTER THREE: TV OPERATION  
3.13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
Using Autom atic Picture Settings  
Your Samsung TV has three automatic picture settings (Standard, “Natural, and  
“Mild”) that are preset at the factory. You can activate either Standard or Mild by pressing  
P.Mode (or by making a selection from the menu). Or, you can select “Custom” which  
automatically recalls your personalized picture settings.  
1
Press the MENU button to  
display the menu.  
Press the VOL + button.  
2
Press the VOL - or VOL +  
button to select the  
“Standard,” “Natural,”  
“Mild,” or “Custom” pic-  
ture setting.  
Choose Standard for the standard factory settings.  
Natural: Optimal indoor screen condition.  
Choose Mild (“Mild Contrast”) when viewing the TV in low light, or when  
playing video games.  
Choose Custom if you want to adjust the settings accordings to personal  
preference (see “Customizing the Picture, page 3.13).  
3.14  
CHAPTER THREE: TV OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
Custom izing the Sound  
You can use the on-screen menus to adjust the bass, treble, and balance according to  
individual preference. (Alternatively, you can use one of the automatic” settings. See  
next page.)  
1
Press the MENU button to  
display the menu.  
Press the CH button to  
select the “Sound” menu.  
2
Press the VOL - or VOL +  
button repeatedly, until  
the word “Custom” is  
selected. (When Custom  
is selected, the words  
Adjust” will appear on  
the screen.  
3
Press the CH button to  
select “Adjust”, then  
press the VOL+ button.  
(The words Bass, Treble,  
and Balance will appear  
on the screen.)  
Press the CH or CH ꢀ  
button to select a particu-  
lar item to be changed.  
4
Press the VOL – or VOL +  
button to increase or  
decrease the value of a  
particular item. For exam-  
ple, if you select “Bass,”  
pressing the VOL + button  
increases it.  
Press the MENU button  
three times to exit.  
CHAPTER THREE: TV OPERATION  
3.15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
Using Autom atic Sound Settings  
Your TV has four automatic sound settings (Standard,” Music,” “Movie,” and “Speech”)  
that are preset at the factory. You can activate any of them by making a selection from the  
on-screen menu. Or, you can select “Custom,” which automatically recalls your personalized  
sound settings.  
1
Press the MENU button to  
display the menu.  
Press the CHbutton  
once to select the  
“Sound” menu.  
2
Press the VOL - or VOL +  
button repeatedly to  
select the “Standard,”  
“Music,” “Movie,”  
“Speech” or “Custom”  
sound settings.  
Choose Standard for the standard factory settings.  
Choose Music when watching music videos or concerts.  
Choose Movies when watching movies.  
Choose Speech when watching a show that is mostly dialogue (i.e., news).  
Choose Custom to recall your personalized settings.  
3.16  
CHAPTER THREE: TV OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
Setting The On/ Off Melody  
You can hear clear melody sound when the TV is powered on or Off.  
1
Press the MENU button to  
display the menu.  
Press the CH button to  
select the “Sound” menu.  
2
Press the VOL - or VOL +  
button repeatedly, until  
the word “Custom” is  
selected. (When Custom  
is selected, the words  
Adjust” will appear on  
the screen.  
3
Press the CH button to  
select “Adjust”, then  
press the VOL+ button.  
4
Press the CH button to  
select “Melody”, then  
press the VOL+ or VOL–  
button to select “On” or  
Off”.  
Press the MENU button  
three times to exit.  
CHAPTER THREE: TV OPERATION  
3.17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
View ing a VCR or Cam corder Tape  
You must select the appropriate mode in order to view the VCR or  
Camcorder signal on the TV.  
1
Press the MENU button to  
display the menu.  
Press the CH button  
twice to select  
Channel”, then press the  
VOL+ button.  
2
Press the CH button  
twice to select TV/AV.  
3
Press the VOL+ or VOL-  
button.  
You will switch between  
viewing the signals com-  
ing from equipment con-  
nected to the TV’s A/V  
jacks, and the TV signal.  
3.18  
CHAPTER THREE: TV OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ch a p t e r Fo u r  
SPECIAL FEATURES  
Custom izing Your Rem ote Control  
(For m odels TXL2791F/ TXM3292F)  
Your TV comes equipped with a universal” remote control. In addition to  
controlling the TV, the universal remote can also operate a VCR and a cable box (even if your  
VCR and cable box are made by manufacturers other than Samsung).  
Setting Up Your Rem ote Control to Operate Your VCR  
1
Turn off your VCR.  
2
On your Samsung remote control, press the SET button.  
The remote control has three  
“modes”: “TV, “VCR”, and “Cable”  
Press the “VCR” button to switch the  
3
Press the VCR button on the top right of your remote control.  
remote control to the “VCR” mode.  
Make sure you enter both digits of  
the code, even if the first digit is a “0.”  
If more than one code listed, try the  
first one.  
4
Enter both digits of the VCR code listed on the next page for  
your brand of VCR.  
If your VCR does not turn on,  
repeat steps 2, 3, and 4, but try one  
of the other codes listed for the  
brand of your particular VCR.  
If no other codes are listed, try each  
code, 000 through 72.  
5
Press the POWER button on the remote control. Your VCR  
should turn on. If your VCR turns on, your remote control is  
now set correctly.  
When your remote control is in  
the “VCR” mode, the volume buttons  
still control your TVs volume.  
6
Once your remote control is set up, press the VCR button  
any time you want to use the remote to operate your VCR.  
When your remote is in the “TV”  
mode, the VCR control buttons (PLAY,  
PAUSE, etc.) will still operate your  
VCR.  
CHAPTER FOUR: SPECIAL FEATURES  
4.1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
VCR Codes  
4.2  
CHAPTER FOUR: SPECIAL FEATURES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Setting Up Your Rem ote Control to Operate Your Cable Box  
1
Turn off your cable box.  
2
On your Samsung remote control, press the SET button.  
The remote control has three  
“modes”: “TV, “VCR,” and  
“CABLE”.  
3
Press the CABLE button on the top right of your remote  
control.  
Press the “CABLE” button to switch  
the remote control to the “Cable”  
mode.  
Make sure you enter both digits  
of the code, even if the first digit is a  
“0.” (If more than one code listed,  
try the first one.)  
4
Enter both digits of the cable box code listed below for your  
brand of cable box.  
If your cable box does not turn  
on, repeat steps 2, 3, and 4, but try  
one of the other codes listed for your  
particular brand of cable box. (If no  
other codes are listed, try each cable  
box code, 00 through 35.)  
5
Press the POWER button. Your cable box should turn on. If your  
cable box turns on, your remote control is now “set up” correct-  
ly.  
When your remote control is  
in the “CABLE” mode, the volume  
buttons still control your TVs vol-  
ume. Also, the VCR control buttons  
(PLAY, PAUSE, etc.) will still operate  
your VCR.  
6
Once your remote control is set up, press the CABLE button  
any time you want to use the remote to operate your cable  
box.  
Cable Box  
Codes  
CHAPTER FOUR: SPECIAL FEATURES  
4.3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Fine Tuning Channels  
Use fine tuning to manually adjust a particular channel for optional reception.  
1
Select the appropriate  
channel.  
Press the MENU button to  
display the menu.  
Press the CH button  
twice to select the  
Channel” menu.  
2
Press the VOL+ button to  
select Channel menu.  
Press the CH button  
three times to select “Fine  
tune”.  
After you adjust the fine tuning,  
3
“*” will appear when you press DIS-  
PLAY while watching this channel.  
Press the VOL+ and VOL-  
button to adjust the fine  
tuning.  
Press the MENU button to  
resume normal viewing.  
4
To store the fine tuning  
setting in the TV’s memo-  
ry, press the CH button.  
( “*” will appear).  
To reset the fine tuning to  
“oo”, press CH .  
4.4  
CHAPTER FOUR: SPECIAL FEATURES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Digital Noise Reduction  
If the broadcast signal received by your TV is weak, you can activate the Digital  
Noise Reduction feature to help reduce any static and ghosting that may appear on  
the screen.  
1
Press the MENU button to  
display the menu.  
Press the VOL + button to  
select the “Picture” menu.  
2
Press the CH button  
three times to select  
"Digital NR."  
Pressing VOL- or VOL+ will  
alternate between “On” and “Off”.  
3
Press the VOL + or VOL -  
button to select Digital  
NR “On”.  
Press the MENU button  
twice to exit.  
CHAPTER FOUR: SPECIAL FEATURES  
4.5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Tilt  
Due to the Earths magnetic field there may be same minor image tilt depending on the  
TVs location. When this occurs, follow the steps below.  
1
Press the MENU button to  
display the menu.  
Press the VOL + button to  
select the Picture menu.  
2
Press the CH button  
five times to select  
“Setup.”  
Press the VOL + button.  
3
Press the VOL– or VOL+  
buttons to adjust the Tilt.  
Press the Menu button to  
exit.  
4.6  
CHAPTER FOUR: SPECIAL FEATURES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Changing the Screen Size  
1
Press the MENU button to  
display the menu.  
Press the VOL + button to  
select the “Picture” menu.  
2
Press the CH button  
twice to select "Size."  
3
Press the VOL + or VOL -  
button repeatedly to  
select “Normal”, Zoom”,  
or “Wide”  
Press the MENU button  
twice to exit.  
Normal : Sets the picture to 4:3 normal mode. This is a standard TV screen size.  
Zoom : Magnifies the size of the picture on-screen.  
Wide : Sets the picture to 16:9 wide mode.  
Note:  
TXL2791F/TXM2790F: Normal Zoom Wide.  
TXM3292F: Normal Wide.  
CHAPTER FOUR: SPECIAL FEATURES  
4.7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Using the R.Surf Feature  
This feature allows you to set the TV to return to a particular channel after a certain  
amount of time. For example, you may be watching a channel when commercials  
start. You can set the R.Surf to “5 minutes”, then switch channels. After 5 minutes,  
the TV will return to the original channel. To use the R.Surf:  
1
While you are watching  
the channel to which you  
want to return, press the  
R.SURF button. The on-  
screen display will read  
“Surf off”.  
2
Press the R.SURF button  
again to set the timer in  
thirty second intervals, up  
to five minutes.  
3
The time you set will begin counting down on the screen.  
When the time runs out, the TV will return to the channel  
you were watching when you set the timer.  
4.8  
CHAPTER FOUR: SPECIAL FEATURES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Setting the On/ Off Tim er  
Before using the timer, you must  
set the TVs clock. (See “Setting the  
Clock” on page 3.10).  
1
Press the MENU button to  
display the menu.  
When any of the timers are set, the  
“Timer” LED will illuminate (front  
panel of TV.)  
Press the CH button  
three times to select  
"Function" menu.  
2
Press the VOL+ button to  
select the “Function” sub-  
menu.  
Press the CH button  
three times to select  
"Time".  
Press the VOL+ button.  
When you set the hours, make  
sure the correct time of day (AM or  
PM) appears to the left of the hour.  
3
Press the CH button to  
select "On time".  
Press the VOL+ button to  
select the “On time”  
hours.  
(The hours digits will be  
highlighted.)  
Press the CH or CH ▼  
button repeatedly to  
select the appropriate  
hours (i.e., the hour when  
the TV will turn on.)  
4
Press the VOL+ button to  
select the “On timemin-  
utes.  
(The minutes digits will be  
highlighted.)  
Press the CH or CH ▼  
button to select the appro-  
priate minutes.  
CHAPTER FOUR: SPECIAL FEATURES  
4.9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
To deactivate the “On time,”  
select “Off” during this step.  
5
Press the VOL + button to  
select “On/Off.”  
Press the CH (or CH )  
button to turn the on-  
timer “On.” (Repeatedly  
pressing the CH or  
CH button will alternate  
between on and off.)  
6
When finished, press the  
VOL + button.  
If no function buttons  
(including remote control buttons or  
front panel buttons) are operated for  
three hours after the TV is turned on  
with the “On time” feature, the TV  
will be automatically turned off.  
7
To set the Off time, press  
the CH button to select  
Off time.”  
Press the VOL + button  
and set the hours and  
minutes. (Follow the same  
procedure as in steps 1~6  
above.)  
8
When finished setting the timer, press the MENU button  
three times to exit.  
Setting the Sleep Tim er  
The sleep timer automatically shuts off the TV after a preset time  
(from 10 to 180 minutes).  
After about 5 seconds, the sleep  
display will disappear from the  
screen, and the time interval will be  
set.  
1
Press the SLEEP button on the remote control.  
2
Press the SLEEP button repeatedly until the appropriate time  
interval appears (any of the preset values from “Off” to “180”).  
4.10  
CHAPTER FOUR: SPECIAL FEATURES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Sound Features  
Choosing a Multi-Channel Sound (MTS) Soundtrack  
Depending on the particular program being broadcast, you can listen to Stereo, Mono,  
or a Separate Audio Program. (SAP audio is usually a foreign-language translation.  
Sometimes SAP has unrelated information like news or weather.)  
1
Press the MENU button to  
display the menu.  
Press the CHbutton  
once to select the  
“Sound” menu.  
2
Press the VOL + button to  
select the Sound menu.  
Press the CHbutton five  
times to select “MTS”.  
The text at the bottom of the  
menu tells you if the incoming  
audio is Stereo, SAP, or Mono.  
3
Press the VOL + button  
repeatedly to select  
“Mono,” “SAP,” or  
“Stereo.”  
Press the MENU button  
twice to exit  
Choose Stereo for channels that are broadcasting in stereo.  
Choose Mono for channels that are broadcasting in mono, or if you are  
having difficulty receiving a stereo signal.  
Choose SAP to listen to the Separate Audio Program, which is usually a  
foreign-language translation.  
You can also change the MTS setting by pressing the “MTSbutton on the remote  
control. (When you change channels, MTS is set to “Stereo” automatically.  
To listen in SAP or Mono,’ change the MTS setting.)  
CHAPTER FOUR: SPECIAL FEATURES  
4.11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Extra sound settings (Turbo Sound, Surround, or Auto Volum e)  
• Turbo Sound  
Turbo sound emphasizes the bass and treble frequencies to add fullness to the sound.  
• Surround  
Your Samsung TV can create a "surround" effect such that the sound seems to come  
from all directions. Once the Surround” is set to On, the setting applies to sound  
effects such as Standard, Music, Movie and Speech.  
• Auto Volume  
Each broadcasting station has its own signal conditions, which can make it necessary  
to adjust the volume every time the channel is changed. Auto volume” lets you  
automat-ically adjust the volume of the desired channel by lowering the sound output  
when the modulation signal is high or by raising the sound output when the modula-  
tion sig-nal is low.  
1
Press the MENU button to  
display the menu.  
Press the CHbutton  
once to select the  
“Sound” menu.  
2
Press the VOL + button to  
select the Sound menu.  
Press the CHbutton  
twice to select “Turbo  
sound”.  
3
Press the VOL + button to  
select “On”.  
Press the MENU button  
twice to exit  
You can set Surround and Auto volume in the same way as setting Turbo  
sound.  
4.12  
CHAPTER FOUR: SPECIAL FEATURES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
View ing Closed Captions  
Your TV decodes and displays the closed captions that are broadcast with certain TV shows.  
These captions are usually subtitles for the hearing impaired or foreign-language trans-  
lations. All VCRs record the closed caption signal from television programs, so home-record-  
ed video tapes also provide closed captions. Most pre-recorded commercial video tapes pro-  
vide closed captions as well. Check for the closed caption symbol in your television schedule  
and on the tapes packaging:  
.
1
Press the MENU button to  
display the menu.  
Press the CH button  
three times to select the  
Function” menu.  
Press the VOL+ button.  
2
Press the CH button  
twice times to select the  
Caption” menu.  
Press the VOL+ button to  
open the Caption menu.  
Misspellings and unusual  
characters sometimes occur during  
closed caption transmissions, especial-  
ly those of live events. There may be a  
small delay before captions appear  
when you change channels. These are  
not malfunctions of the TV.  
3
Press the VOL+ or VOL –  
button to turn closed cap-  
tioning on/off.  
In caption mode, captions  
appear at the bottom of the screen,  
and they usually cover only a small  
portion of the picture.  
4
Press the CH button to  
highlight “Mode.”  
In text mode, information unrelated  
to the program, such as news or  
weather, is displayed. Text often  
covers a large portion of the screen.  
Press the VOL – or VOL +  
button to select “Caption”  
or “Text.”  
Different channels and fields  
display different information: Field 2  
carries additional information that  
supplements the information in  
Field 1. (For example, Channel 1  
may have subtitles in English, while  
Channel 2 has subtitles in Spanish.)  
5
Depending on the particular broadcast, it might be necessary to  
make changes to “Channels” and “Field”:  
Use the CH , CH , VOL + and VOL - buttons to make the  
changes. (Follow the same procedure as in steps 3~4 above.)  
Press the MENU button three times to exit.  
CHAPTER FOUR: SPECIAL FEATURES  
4.13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Using the V-Chip (Only USA)  
The V-Chip feature automatically locks out programming that is deemed inappropriate for  
children. The user must first enter a PIN (personal ID number) before any of the V-Chip  
restrictions can be set up or changed.  
Note : When the V-chip feature is active, channel-auto program features do not function.  
Setting Up Your Personal ID Num ber (PIN)  
1
Press the MENU button to  
display the menu.  
Press the CH three  
times to select the  
Function” menu.  
Press the VOL + button.  
2
Press the CH button  
five times to select the  
V-chip” menu.  
Press the VOL+ button.  
The “Enter pin” screen will appear. Enter your 4-digit PIN  
number. Note: The default PIN number for a new TV set is  
0-0-0-0.”  
3
After entering a valid PIN  
number, the “V-chip”  
screen will appear.  
Press the CH button  
three times and highlight  
Change pin.”  
Note: If you forget the PIN,  
press the remote-control keys in the  
following sequence, which resets the  
pin to 0-0-0-0:  
4
While the “Change pin”  
field is selected, press the  
VOL+ button. The Change  
pin screen will appear.  
Choose any 4-digits for  
your PIN and enter them.  
POWER OFF MUTE 8 2 ▼  
4 POWER ON.  
As soon as the 4 digits are entered, the “Confirm new pin”  
screen appears. Re-enter the same 4 digits. When the  
Confirm screen disappears, your PIN has been memorized.  
Press the MENU button three times to exit.  
4.14  
CHAPTER FOUR: SPECIAL FEATURES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
How to Enable/ Disable the V-Chip  
1
Press the MENU button to  
display the menu.  
Press the CH button  
three times to select the  
Function” menu.  
Press the VOL + button.  
2
Press the CH button  
five times to highlight the  
V-chip” menu.  
Press the VOL+ button.  
The “Enter pin” screen  
will appear. Enter your 4-  
digit PIN number.  
3
The “V-Chip” screen will  
appear, and “V-Chip lock”  
will be selected (turns  
blue color).  
To enable the V-Chip fea-  
ture, press the VOL+ but-  
ton so that the “V-Chip  
lock” field is Yes.  
(Pressing the VOL+ button  
will alternate between Yes  
and No.)  
How to Set up Restrictions Using the “TV guidelines”  
First, set up a personal identification number (PIN), and enable the V-Chip. (See previous  
section.) Parental restrictions can be set up using either of two methods: The TV guide-  
lines or the MPAA rating.  
1
Press the MENU button to  
display the menu.  
Press the CH button  
three times to select the  
Function” menu.  
Press the VOL + button.  
CHAPTER FOUR: SPECIAL FEATURES  
4.15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
2
Press the CH button  
five times to select the “V-  
chip” menu.  
Press the VOL+ button.  
The “Enter pin” screen  
will appear. Enter your 4-  
digit PIN number.  
3
The “V-chip” screen will  
appear. Press the CH ▼  
button, and highlight the  
field for “TV guidelines.”  
Note: These categories consist of  
two separate groups: TV-Y and TV-Y7  
(young children through age 7), and  
TV-G through TV-MA (everybody  
else).  
4
Press VOL+. The “TV  
guidelines” screen will  
appear. Press the CH ,  
CH buttons to highlight  
one of the six age-based  
categories:  
The restrictions for these two groups  
work independently: If a household  
includes very young children as well  
as young adults, the TV guidelines  
must be set up separately for each age  
group. (See next step.)  
TV-Y  
TV-Y7  
Young children  
Children 7 and over  
--------------------------------------  
TV-G General audience  
TV-PG Parent guidance  
TV-14 Viewers 14 and over  
TV-MA Mature audience  
5
At this point, one of the TV-Ratings is highlighted (blue color).  
Press the VOL+ button: Depending on your existing setup, a letter “Uor “B” will start blinking.  
(U= Unblocked, B= Blocked)  
While the “U” or ”B” is red, press the CH or CH button to block or unblock the category.  
Press MENU once to save the TV guidelines. A TV-Rating will be highlighted (BLUE), and no letters will blink.  
To exit this screen, press the MENU button again. To select a different TV-Rating, press the CH or CH button  
and then repeat the process.  
Note 1: The TV-Y7, TV-PG, TV-14 and TV-MA have additional options. See the next step to change  
any of the following sub-ratings:  
FV: Fantasy violence  
D: Dialog  
L: L  
S: Sexual situation  
V: Violence  
Note 2: The V-Chip will automatically block certain categories that are “more restrictive.” For example, if you block  
TV-Ycategory, then TV-Y7 will automatically be blocked. Similarly, if you block the TV-G category, then all the  
categories in the “young adult” group will be blocked (TV-G, TV-PG, TV-14 and TV-MA). The sub-ratings (D, L, S, V)  
work together similarly. (See next section.)  
4.16  
CHAPTER FOUR: SPECIAL FEATURES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
6
How to set the FV, D, L, S and V sub-ratings:  
First, highlight one of these TV-Ratings: TV-Y7, TV-PG, TV-14 or TV-MA (See Step 4, on previous page).  
Next, while the TV-Rating is highlighted (BLUE), repeatedly press the VOL+ button. This will cycle through  
the available sub-ratings (FV,L, S, D or V).  
A blinking letter (“Uor “B”) will be displayed for each sub-rating. While the “Uor “B” is blinking, press  
CH or CH to change the sub-rating.  
Press MENU once to save the TV guidelines. A TV-Rating will be highlighted (BLUE), and no letters will blink.  
To exit this screen, press MENU again. To select a different TV-Rating, press CH or CH and then repeat  
the process.  
Note: The V-chip will automatically block certain categories that are “More restrictive”. For example, if you  
block “Lsub-rating in TV-PG, then the “Lsub-ratings in TV-14 and TV-MA will automatically be blocked.  
7
Press the MENU button three times to clear all the screens. (Or proceed to the next section, and set up  
additional restrictions based on the MPAA codes).  
How to Set up Restrictions using the MPAA Ratings: G, PG, PG-  
13, R, NC-17, X  
The MPAA rating system uses the Motion Picture Association of America (MPAA) system,  
and its main application is for movies. (Eventually, movie videocassettes will be encoded  
with MPAA ratings.) When the V-Chip lock is on, the TV will automatically block any  
programs that are coded with objectionable ratings (either MPAA or TV-Ratings).  
1
Press the MENU button to  
display the menu.  
Press the CH button  
three times to select the  
Function” menu.  
Press the VOL + button.  
2
Press the CH button  
five times to select the “V-  
chip” menu.  
Press the VOL+ button.  
The “Enter pin” screen  
will appear. Enter your 4-  
digit PIN number.  
CHAPTER FOUR: SPECIAL FEATURES  
4.17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
3
The “V-chip” screen will  
appear. Press the CH ▼  
button twice, and select  
“MPAA rating.”  
4
While “MPAA rating” is  
selected, press the VOL+  
button. The “MPAA rat-  
ing” screen will appear.  
G
General audience (no restrictions).  
Parental guidance suggested.  
5
PG  
Repeatedly press the CH  
button to select a  
particular MPAA catego-  
ry. (When a category is  
selected, its color  
PG-13 PG-13 (Parents strongly cautioned).  
R
R (Restricted. Children under 17 should  
be accompanied by an adult).  
NC-17 No children under age 17.  
changes to blue.)  
X
X (Adults only).  
Not rated.  
Pressing the CH button  
will cycle through the  
MPAA categories:  
NR  
While a particular category is selected, press the VOL+ button to activate it.  
A letter (“Uor “B”) will be displayed. Press the CH or CH button to select “Uor”B”.  
Press the MENU button four times to save the settings and to clear all screens.  
Note: The V-Chip will automatically block any category that is “more restrictive.” For example, if you  
block the “PG-13” category, then “R,” “NC-17,” and “Xwill automatically be blocked also.  
How to Reset the TV after the V-Chip Blocks a Channel  
(Em ergency Escape”)  
If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the following mes-  
sage will appear: “Excessive rating.”  
To resume normal viewing, tune to a different channel using the number buttons. Under certain conditions  
(depending on the rating of the local TV programs) the V-Chip might lock out all the channels. In this case, use  
the V-Chip function for an “emergency escape”:  
Press the MENU button to display the menu. Press CH three times to select the “Function” menu and press  
the VOL + button.  
Press the CH button five times to highlight the “V-chip” menu and press the VOL + button. Enter your PIN num-  
ber, and press the VOL+ button to temporarily disable the V-Chip Lock.  
4.18  
CHAPTER FOUR: SPECIAL FEATURES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ch a p t e r Fiv e  
TRO UBLESHO O TING  
If the TV seems to have a problem, first try this list of possible problems and solutions.  
If none of these troubleshooting tips apply, then call your nearest service center.  
Identifying Problem s  
Problem  
Possible Solution  
Poor picture  
Try another channel.  
Adjust the antenna.  
Check all wire connections.  
Poor sound quality.  
No picture or sound.  
Try another channel.  
Adjust the antenna.  
Try another channel.  
Press the TV/VIDEO button.  
Make sure the TV is plugged in.  
Check the antenna connections.  
No color, wrong colors or tints.  
Make sure the program is broadcast in color.  
Adjust the picture settings.  
If the set is moved or turned in a different  
direction, the power should be OFF for at least  
30 minutes.  
Picture rolls vertically.  
The TV operates erratically  
The TV wont turn on.  
Adjust the antenna.  
Check all wire connections.  
Unplug the TV for 30 seconds, then try  
operating it again.  
Make sure the wall outlet is working.  
CHAPTER FIVE: TROUBLESHOOTING  
5.1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
Cleaning and Maintaining Your TV  
With proper care, your TV unit will give you many years of service. Please follow these  
guidelines to get the maximum performance from your TV.  
Placem ent  
Do not place the TV near extremely hot, cold, humid or dusty places.  
Do not place the TV near appliances with electric motors that create magnetic fields,  
such as vacuum cleaners.  
Keep the ventilation openings clear; do not place the TV on a soft surface, such as  
cloth or paper.  
Place the TV in a vertical position only.  
Liquids  
Do not handle liquids near or on the TV. Liquids that spill into it can cause serious  
damage.  
Cabinet  
Never open the cabinet or touch the parts inside.  
Wipe your TV with a clean, dry cloth. Never use water, cleaning fluids, wax, or  
chemicals.  
Do not put heavy objects on top of the cabinet.  
Tem perature  
If your TV is suddenly moved from a cold to a warm place, unplug the power cord,  
and allow at least two hours for moisture that may have formed inside the unit to dry  
completely.  
Using Your TV in Another Country  
If you plan to take your TV with you to a foreign country, please be aware of the different  
television systems that are in use around the world. A TV designed for one system may  
not work properly with another system due to differences in the TV channel frequencies  
Specifications  
TXL2791F / TXM2790F / TXM3292F  
Model  
AC 120V  
60Hz  
Voltage  
Frequency of Operation  
Power Consumption  
140 Watts / 140 Watts / 156 Watts  
A.1  
APPENDIX  
Download from Www.Somanuals.com. All Manuals Search And Download.  

QSC Audio Stereo Amplifier M PL 60PFC User Guide
Q See DVR QSC26404 User Guide
Ratoc Systems Network Card REX PCICA1 User Guide
RCA TV DVD Combo 12L500TD User Guide
RIDGID Saw R855 User Guide
Samsung All in One Printer SCX 4216F User Guide
Samsung Computer Monitor 2032GWPlus, 2232GWPlus, 2032BWPlus, 2232BWPlus User Guide
Samsung Digital Camera EC DV150FBPBUS User Guide
Sears Lawn Mower 91725597 User Guide
Sennheiser Headphones CX 300 black User Guide