CL21K30MQ
CL21K30M16
COLOR TELEVISION
Ow ner’s
Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
CO NTENTS
Chapter 1: Your New TV. . . . . . . . . . . . . . . . . 4
List of Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Familiarizing Yourself with The TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Front Panel Buttons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Side Panel Jacks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Rear Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Chapter 2: Installation . . . . . . . . . . . . . . . . . . 9
Connecting VHF and UHF Antennas. . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Antennas with 300-ohm Flat Twin Leads. . . . . . . . . . . . . . . . . 9
Antennas with 75-ohm Round Leads . . . . . . . . . . . . . . . . . . 10
Separate VHF and UHF Antennas . . . . . . . . . . . . . . . . . . . . . 10
Connecting Cable TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Cable without a Cable Box . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connecting to a Cable Box that Descrambles
All Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Connecting to a Cable Box that Descrambles
Some Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Connecting a VCR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Connecting a Second VCR to Record from the TV . . . . . . . . 14
Connecting a DVD Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Connecting a Camcorder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Installing Batteries in the Remote Control . . . . . . . . . . . . . . . . . . . . . . 16
Chapter 3: Operation . . . . . . . . . . . . . . . . . . 17
Turning the TV On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Viewing the Menus and On-Screen Displays . . . . . . . . . . . . . . . . . . . . 17
Viewing the Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Viewing the Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Selecting a Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Memorizing the Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Selecting the Video Signal-source . . . . . . . . . . . . . . . . . . . . . 19
Storing Channels in Memory (Automatic Method) . . . . . . . . 20
Adding and Erasing Channels (Manual Method) . . . . . . . . . . 21
Changing Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Using the Channel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Directly Accessing Channels . . . . . . . . . . . . . . . . . . . . . . . . . 22
Using the PRE-CH Button to select the Previous Channel . . . 22
Channel Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Customizing the Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Using Automatic Picture Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Using Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Customizing the Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Using Automatic Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Viewing a VCR or Camcorder Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
2
Download from Www.Somanuals.com. All Manuals Search And Download.
CO NTENTS
Chapter 4: Special Features . . . . . . . . . . . . . 29
Fine Tuning Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Selecting the Color Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Changing the Screen Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Using the Surf Feature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Choosing a Multi-Channel Sound (MTS) Soundtrack . . . . . . . . . . . . . 33
Extra Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Setting the On/Off Timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Setting the Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Viewing Closed Captions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Chapter 5: Troubleshooting . . . . . . . . . . . . . 38
Identifying Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Cleaning and Maintaining Your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Using Your TV in Another Country . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Ch a p t e r O n e
YO UR NEW TV
List of Features
Your TV was designed with the latest technology. This TV is a high-performance unit that
includes the following special features:
• Easy-to-use remote control
• Easy-to-use on-screen menu system
• Automatic timer to turn the TV on and off
• Adjustable picture and sound settings that can be stored in the TV’s memory
• Automatic channel tuning for up to 181 channels
• A special filter to reduce or eliminate reception problems
• Fine tuning control for the sharpest picture possible
• Built-in, dual channel speakers
• A special sleep timer
• Surround, Turbo Sound, Auto Volume
4
Download from Www.Somanuals.com. All Manuals Search And Download.
YO UR NEW TV
Fam iliarizing Yourself w ith The TV
Front Panel Buttons
The buttons on the front panel control your TV’s basic features, including the on-screen
menu. To use the more advanced features, you must use the remote control.
˛
MENU
Press to see an on-screen menu of your TV's fea-
tures.
‹
Rem ote Control Sensor
Aim the remote control towards this spot on the
TV.
«
VOL – , +
Press to increase or decrease the volume.
STAND BY indicator
Lights up when you turn the power off.
Also used to select items on the on-screen menu.
fl
POWER
Press to turn the TV on and off.
CH
and CH
Press to change channels. Also press to select
various items on the on-screen menu.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
YO UR NEW TV
Side Panel J acks
You can use the Side panel jacks to connect an A/V component that is used only occa-
sionally, such as a camcorder or video game. (For information on connecting equipment,
see page 15.)
˛
AUDIO INPUTS
Audio signals from VCRs, DVD players and similar
devices.
HEADPHONE
Connect a set of external headphones to this jack
for private listening.
«
VIDEO INPUT
Video signals from VCRs, DVD players and similar
devices.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
YO UR NEW TV
Rear Panel J acks
Use the rear panel jacks to connect an A/V component that will be connected
continuously, such as a VCR or a DVD player.
Because there are two sets of input jacks, you can connect two different A/V
components (i.e., a VCR and a DVD, 2 VCRs, etc.)
For more information on connecting equipment, see pages 9-14.
˛
VIDEO INPUT
Video signals from VCRs, DVD players and similar
AUDIO-VIDEO MONITOR
OUTPUTS
devices.
These audio-video signals are identical to A/V
signals being displayed on the big screen.
(Typically used as the input signals for a record-
ing VCR.)
«
AUDIO INPUTS (Input1, 2)
Audio signals from VCRs, DVD players and similar
devices.
‹
COMPONENT INPUT
Connect video from a DVD player.
Note: Monitor Output doesn’t operate in the DVD
mode.
DVD AUDIO INPUTS (Input2)
Use these jacks to connect the audio signals
from a DVD player when using the DVD video
input jacks. When not using the DVD jacks, these
audio jacks function as audio for Video 2.
VHF/ UHF
Connect to an antenna or to a cable TV system.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
YO UR NEW TV
Rem ote Control
You can use the remote control up to about 23 feet from the TV. When using the remote,
always point it directly at the TV.
˛
POWER
Turns the TV on and off.
PRE-CH
Tunes to the previous channel.
«
Num ber buttons
Press to select channels directly
on the TV.
TV/ VIDEO
Press to display all of the available
video sources (i.e., Antenna/Cable,
VCR).
+100
Press to select channels over 100.
For example, to select
channel 121, press “+100,” then
press “2” and “1.”
CH and CH
(Channel Up/ Dow n)
Press CH
channels.
or CH
to change
‹
MUTE
Press to temporarily cut off
the sound.
æ
INFO
Press to see the time, channel,
etc., on-screen.
VOL -, VOL
+
EXIT
Press to exit the menu.
Press to increase or decrease the
volume.
fi
Up, Dow n, Left,
Right (▲, ▲, ˇ , ˆ)/
ENTER
Press to select highlight up, down,
left, or right. While using the on-
screen menus, press the ENTER
button to activate (or change) a
particular item.
fl
SLEEP
Press to select a preset time inter-
val for automatic shutoff.
‚
MENU
Displays the main on-screen
menu.
MTS (Multichannel
Television Stereo)
Press to choose stereo, mono or
Separate Audio Program (SAP
broadcast).
ı
R-SURF
Press the SURF button to automati-
cally return to a preferred channel
after a user-preset time delay.
CH.SCAN
TURBO
Press to turn the TURBO sound On
or Off.
Press to have the TV automatically
scan all of the channels it has
memorized.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Ch a p t e r Tw o
INSTALLATIO N
Connecting VHF and UHF Antennas
If your antenna has a set of leads that
look like this, see “Antennas with
300-ohm Flat Twin Leads” below.
If your antenna has one lead that looks
like this, see “Antennas with 75-ohm
Round Leads” on next page.
If you have two antennas, see “Separate
VHF and UHF Antennas” on next page.
Antennas w ith 300-ohm Flat Tw in Leads
If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has
300-ohm twin flat leads, follow the directions below.
1
Place the wires from the
twin leads under the
screws on the 300-75 ohm
adaptor (not supplied).
Use a screwdriver to
tighten the screws.
2
Plug the adaptor into the
VHF/UHF terminal on the
bottom of the back panel.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATIO N
Antennas w ith 75-ohm Round Leads
1
Plug the antenna lead into
the VHF/UHF
terminal on the bottom of
the back panel.
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must
combine the two antenna signals before connecting the antennas to the TV. This
procedure requires an optional combiner-adaptor (available at most electronics shops).
1
Connect both antenna
leads to the combiner.
2
Plug the combiner into the
VHF/UHF terminal on the
bottom of the rear panel.
Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
Cable w ithout a Cable Box
Because this TV is cable-ready,
you do not need a cable box to view
unscrambled cable channels.
1
Plug the incoming cable
into the VHF/UHF antenna
terminal on back of the TV.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATIO N
Connecting to a Cable Box that Descram bles All Channels
This terminal might be labeled
“ANT OUT”, “VHF OUT” or simply,
“OUT”.
1
Find the cable that is con-
nected to the ANTENNA
OUT terminal on your
cable box.
2
Connect the other end of
this cable to the VHF/UHF
antenna terminal on the
back of the TV.
Connecting to a Cable Box that Descram bles Som e Channels
If your cable box descrambles only some channels (such as premium channels), follow the
instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of
coaxial cable. (These items are available at most electronics stores.)
This terminal might be labeled
“ANT IN”, “VHF IN” or simply,
“IN”.
1
Find and disconnect the
cable that is connected to
the ANTENNA IN
terminal on your cable
box.
2
Connect this cable to a
two-way splitter.
Incoming Cable
Splitter
3
Connect a coaxial cable
between an OUTPUT ter-
minal on the splitter and
the IN terminal on the
cable box.
Incoming Cable
Splitter
Cable Box
Continued...
11
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATIO N
4
Connect a coaxial cable
between the ANTENNA
OUT terminal on the cable
box and the B–IN terminal
on the RF(A/B) switch.
Incoming
Cable
Splitter
RF (A/B)
Switch
Cable Box
5
Connect another cable
between the other OUT
terminal on the splitter
and the A–IN terminal on
the RF (A/B) switch.
Incoming
Cable
Splitter
RF (A/B)
Switch
Cable Box
6
Connect the last coaxial
cable between the OUT
terminal on the RF (A/B)
switch and the VHF/UHF
terminal on the rear of the
TV.
Incoming
Cable
Splitter
RF (A/B)
Switch
TV Rear
Cable Box
After you’ve made this connection, set the A/B switch to the “A” position for normal view-
ing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the
A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which is
usually channel 3 or 4.)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATIO N
Connecting a VCR
These instructions assume that you have already connected your TV to an antenna or a cable
TV system (according to the instructions on pages 9-12). Skip step 1 if you have not yet
connected to an antenna or a cable system.
1
Unplug the cable or
antenna from the back of
the TV.
2
VCR Rear Panel
Connect the cable or
antenna to the
ANTENNA IN terminal on
Incoming
Cable or
Antenna
the back of the VCR.
3
VCR Rear Panel
TV Rear Panel
Connect a coaxial cable
between the ANTENNA
OUT terminal on the VCR
and the antenna
Coaxial Cable
terminal on the TV.
A coaxial cable is usually included with a VCR. (If not, check your local electronics
store).
TV Rear Panel
VCR Rear Panel
4
Connect a set of audio
cables between the
AUDIO OUT jacks on the
VCR and the AUDIO jacks
on the TV.
Audio Cable
TV Rear Panel
5
VCR Rear Panel
Connect a video cable
between the VIDEO OUT
jack on the VCR and the
VIDEO jack on the TV.
Video Cable
Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATIO N
Connecting a Second VCR to Record from the TV
Your TV can send out signals of its picture and sound to be recorded by a second VCR.
To do this, connect your second VCR as follows:
TV Rear Panel
1
VCR Input Panel
Connect a set of audio
cables between the
AUDIO OUT jacks on the
TV and the AUDIO IN
jacks on the VCR.
Audio Cable
(The VCR input jacks might be either on the front or on back of the VCR.)
2
VCR Input Panel
TV Rear Panel
Connect a video cable
between the VIDEO OUT
jack on the TV and the
VIDEO IN jack on the VCR.
Video Cable
Refer to your VCR’s instructions for more information about how to record using this kind
of connection.
Connecting a DVD Player (480i)
The rear panel jacks on your TV make it easy to connect a DVD player to your TV.
TV Rear Panel
1
DVD Player Rear Panel
Connect a set of audio
cables between the
AUDIO INPUT 2 jacks on
the TV and the AUDIO
OUT jacks on the DVD
Audio Cable
player.
TV Rear Panel
2
DVD Player Rear Panel
Connect a video cable
between the COMPO-
NENT INPUT (Y, Pb, Pr)
jacks on the TV and the
DVD-OUT (Y, Pb, Pr) jacks
on the DVD player.
Video Cable
Note: For an explanation of Component video, see your DVD player's owner's manual.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATIO N
Connecting a Cam corder
The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow
you to view the camcorder tapes without using a VCR. (Also see “Viewing a VCR or
Camcorder Tape” on page 28.)
1
Locate the A/V output
jacks on the camcorder.
They are usually found on
the side or back of the
camcorder.
Camcorder
Output Jacks
2
TV Side Panel
Camcorder
Output Jacks
Connect an audio cable
between the AUDIO OUT-
PUT jack on the cam-
corder and the AUDIO
terminals on the side of
the TV.
Audio Cable
Y-Connector
3
TV Side Panel
Camcorder
Output Jacks
Connect a video cable
between the VIDEO OUT-
PUT jack on the cam-
corder and the VIDEO ter-
minal on the side of the
TV.
Video Cable
The audio-video cables shown here are usually included with a Camcorder. (If not, check
your local electronics store.) If your camcorder is stereo, you need to connect a set of two
cables.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATIO N
Installing Batteries in the Rem ote Control
1
Slide the cover out com-
pletely.
Make sure to match the “+” and
2
“–” ends of the batteries with the
diagram inside the compartment.
Install two AAA size
batteries.
Remove the batteries and store
them in a cool, dry place if you won’t
be using the remote control for a
long time.
3
Replace the cover.
The remote control can be used up
to about 23 feet from the TV.
(Assuming typical TV usage, the bat-
teries last for about one year.)
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Ch a pterTh r e e
OPERATIO N
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the front panel.
View ing the Menus and On-Screen Displays
View ing the Menus
The on-screen menus disappear
from the screen after about two minutes.
1
Picture
With the power on, press
Mode
ˇ
Dynamic
ˆ
ˆ
the MENU button.
Adjust
Color Tone
Size
:
:
Cool
Normal
The main menu appears
on the screen. Its left side
has four icons: Picture,
Sound, Channel and
Function.
Move
Select
Exit
You can also use the MENU,
CHANNEL and VOLUME buttons
on the control panel of the TV to
make selections.
2
Use the ▲ and ▲ buttons to highlight one of the 4 icons.
Then press the ˆ button to access the icon’s sub-menu.
Press the EXIT button to exit.
View ing the Display
The on-screen displays
1
disappear after about ten seconds.
ANT 11
Signal
*
Press the INFO button.
:
Mono
on the remote control.
When Closed Caption has been set,
the icon(
ing the INFO button.
) will appear by press-
The on-screen display
shows any or all of the
following: Active channel,
picture mode, audio mode,
audio source and the time.
(“*” indicates a channel
has been manually fine
tuned.)
Picture
Sound
MTS
: Dynamic
: Custom
: Stereo
- - : - - am
17
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIO N
Selecting a Menu Language
1
Function
Press the MENU button to
Language
Time
Caption
ˇ
English
ˆ
ˆ
ˆ
display the menu.
Press the ▲ or ▲ button
to select “Function”, then
press the ˇ or ˆ button.
Move
Select
Exit
2
Function
English
Press the ˇ or ˆ button
to select the appropriate
language: English,
Spanish or French.
Language
Time
Caption
ˇ
ˆ
ˆ
ˆ
Press the EXIT button to
exit.
Move
Select
Exit
18
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIO N
Mem orizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (antenna)
and cable channels. After the available channels are memorized, use the CH
and
CH
buttons to scan through the channels. This eliminates the need to change
channels by entering the channel digits. There are three steps for memorizing channels:
selecting a broadcast source, memorizing the channels (automatic) and adding and delet-
ing channels (manual).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the
type of signal source that is connected to the TV (i.e., an antenna or a cable system).
1
Channel
Press the MENU button to
ANT/CATV
Auto Program
TV/AV
Fine Tune
Add/Erase
ˇ
ˇ
ANT
TV
ˆ
ˆ
ˆ
ˆ
ˆ
display the menu.
Press the ▲ or ▲ button
to select “Channel”, then
press the ˇ or ˆ button.
Move
Select
Exit
2
Channel
ANT
Repeatedly press the ˇ or
ˆ button to cycle through
these choices:
ANT/CATV
Auto Program
TV/AV
Fine Tune
Add/Erase
ˇ
ˆ
ˆ
ˆ
ˆ
ˆ
ˇ
TV
ANT (antenna), STD, HRC
or IRC (all cable TV).
Move
Select
Exit
Press the EXIT button to
exit.
Note: STD, HRC and IRC identify various types of cable TV systems. Contact your local cable com-
pany to identify the type of cable system that exists in your particular area.
At this point the signal source has been selected. Proceed to “Storing Channels in Memory” (next
page).
19
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIO N
Storing Channels in Mem ory (Autom atic Method)
1
Channel
First, select the correct
ANT/CATV
Auto Program
TV/AV
Fine Tune
Add/Erase
ˇ
ˇ
ANT
TV
ˆ
ˆ
ˆ
ˆ
ˆ
signal source (ANT, STD,
HRC, IRC). See steps 1~2 on
previous page.
Press the MENU button,
then press the ▲ or ▲
button to select “Channel”
then press the ˇ or ˆ but-
ton.
Move
Select
Exit
2
Channel
ANT
Press the ▲ or ▲ button
to select “Auto Program”.
ANT/CATV
Auto Program
TV/AV
Fine Tune
Add/Erase
ˇ
ˆ
ˆ
ˆ
ˆ
ˆ
ˇ
TV
Move
Select
Exit
The TV automatically cycles
through all of the available channels
and stores them in memory. This
takes about one to two minutes.
3
Auto Program
ANT 30
Press the ˇ or ˆ button.
The TV will begin
memorizing all of the
available channels.
Press the MENU button at any time
to interrupt the memorization
process and return to the Channel
menu.
Exit
4
After all the available channels are stored, the Channel menu
reappears. Press the EXIT button to exit.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIO N
Adding and Erasing Channels (Manual Method)
1
Channel
Press the MENU button to
ANT/CATV
Auto Program
TV/AV
Fine Tune
Add/Erase
ˇ
ˇ
ANT
TV
ˆ
ˆ
ˆ
ˆ
ˆ
display the menu.
Press the ▲ or ▲ button
to select “Channel”, then
press the ˇ or ˆ button.
Move
Select
Exit
2
Channel
Press the ▲ or ▲ button
to select “Add/Erase”,
then press the ˇ or ˆ
button.
Channel
Select
:
:
ANT 11
Erased
Move
Select
Exit
3
Channel
Press the ˇ , ˆ or number
buttons to select the
channel you want added
or erased.
Channel
Select
:
:
ANT 12
Erased
Move
Select
Exit
4
Channel
Press the ▲ or ▲ button
to select “Select”.
Channel
Select
:
:
ANT 12
Added
Press the ˇ or ˆ button
to select “Added” or
“Erased”.
Move
Select
Exit
Press the EXIT button to
exit.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIO N
Changing Channels
Using the Channel Buttons
Press the CH
or CH
button to change channels.
When you press CH
or CH , the TV changes channels in sequence. You will see all the
channels that the TV has memorized. (The TV must have memorized at least three channels.)
You will not see channels that were either erased or not memorized.
Directly Accessing Channels
Use the number buttons to quickly tune to any channel.
Press the number buttons to go directly to a channel.
For example, to select channel 27, press “2”, then “7”.
The TV will change channels when you press the
second number.
When you use the number buttons, you can directly select channels that were either erased or
not memorized.
To select a channel over 100, press the +100 button. (For channel 122, press “+100”, then “2”,
then “2”.)
To change to single-digit channels (0–9) faster, press “0” before the
single digit. (For channel “4”, press “0”, then “4”.)
Using the PRE-CH Button to select the Previous Channel
To quickly switch between two
channels that are far apart, tune to
one channel, then use the number
button to select the second channel.
Then, use the PRE-CH button to
quickly alternate between them.
Press the PRE-CH button.
The TV will switch to the last channel viewed.
Channel Scan
Press the CH.SCAN button.
The TV automatically scan all of the channels it has memorized.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIO N
Custom izing the Picture
You can use the on-screen menus to change the contrast, brightness, sharpness, color,
and tint according to personal preference. (Alternatively, you can use one of the
“automatic” settings. See next page.)
1
Picture
Press the MENU button to
Mode
ˇ
Dynamic
ˆ
ˆ
Adjust
Color Tone
Size
display menu.
:
:
Cool
Normal
Press the or
ˇ
ˆ
button to
select “Picture”.
Move
Select
Exit
2
Picture
Press the ▲ or ▲ button
to select “Adjust”, then
press the ˇ or ˆ button.
(The words Contrast,
Brightness, Sharpness,
Color and Tint will appear
on the screen.)
Adjust
Contrast
Brightness
Sharpness
Color
100
50
70
50
Tint
G
50
R
50
Move
Select
Exit
After adjusting an item, the gauge
will automatically disappear (after
about 5 seconds).
3
Press the ▲ or ▲ button to
select a particular item,
then press the ˇ or ˆ but-
ton to increase or
Contrast
100
decrease the value of a
particular item.
Press the EXIT button to
exit.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIO N
Using Autom atic Picture Settings
Your TV has three automatic picture settings (“Dynamic”, “Standard” and “Movie”) that
are preset at the factory. You can activate either Dynamic, Standard or Movie by making
a selection from the menu. Or, you can select “Custom” which automatically recalls your
personalized picture settings.
1
Picture
Press the MENU button to
Mode
ˇ
Dynamic
ˆ
ˆ
Adjust
Color Tone
Size
display menu.
:
:
Cool
Normal
Press the or
ˇ
ˆ
button to
select “Picture”.
Move
Select
Exit
2
Picture
Press the
ˇ
or
ˆ
button
Mode
ˇ
Dynamic
ˆ
ˆ
to select the “Dynamic”,
“Standard”, “Movie” or
“Custom” picture setting.
Adjust
Color Tone
Size
:
:
Cool
Normal
Press the EXIT button to
exit.
Move
Select
Exit
•
Choose Dynamic for viewing the TV during the day or when there is
brightlight in the room.
•
•
Standard: Optimal indoor screen condition.
Choose Movie when viewing the TV in low light, or when
playing video games.
•
Choose Custom if you want to adjust the settings according to personal
preference (see “Customizing the Picture”, page 23).
24
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIO N
Adjusting the Volum e
Press the VOL + or VOL– button to increase or decrease the volume.
Using Mute
At any time, you can temporarily cut off the sound using the Mute button.
1
Press the MUTE button and the sound cuts off.
The word “Mute” will appear in the lower-left corner of the
screen.
2
To turn mute off, press the MUTE button again, or simply press
either the VOL – or VOL + button.
Custom izing the Sound
You can use the on-screen menus to adjust the bass, treble, and balance according to
individual preference. (Alternatively, you can use one of the “automatic” settings. See
next page.)
1
Sound
Press the MENU button to
Mode
Adjust
ˇ
Custom
ˆ
ˆ
display the menu.
Auto Volume
Melody
Surround
Turbo Sound
MTS
:
:
:
:
Off
On
Off
Off
Press the ▲ or ▲ button
to select “Sound” menu,
ˇ
Stereo
ˆ
then press the ˇ or
ˆ
Move
Select
Exit
button.
2
Sound
Custom
Press the ˇ or
ˆ
button
Mode
Adjust
Auto Volume
Melody
Surround
Turbo Sound
MTS
ˇ
ˆ
ˆ
repeatedly, until the word
“Custom” is selected.
(When Custom is select-
ed, the word “Adjust” will
appear on the screen.)
:
:
:
:
Off
On
Off
Off
ˇ
Stereo
ˆ
Move
Select
Exit
3
Sound
Press the ▲ or ▲ button
to select “Adjust”, then
Adjust
Bass
Treble
Balance
50
50
press the ˇ or
ˆ
button.
L
50
R
50
(The words Bass, Treble,
and Balance will appear
on the screen.)
Move
Select
Exit
Continued...
25
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIO N
After adjusting an item, the gauge
will automatically disappear (after
about 5 seconds).
4
Press the ▲ or ▲ button
to select a particular item
to be changed.
Press the ˇ or
ˆ
button
Bass
50
to increase or decrease
the value of a particular
item.
Press the EXIT button to
exit.
Using Autom atic Sound Settings
Your TV has four automatic sound settings (“Standard”, “Music”, “Movie” and “Speech”)
that are preset at the factory. You can activate any of them by making a selection from the
on-screen menu. Or, you can select “Custom”, which automatically recalls your personalized
sound settings.
1
Sound
Press the MENU button to
Mode
Adjust
ˇ
Custom
ˆ
ˆ
display the menu.
Auto Volume
Melody
Surround
Turbo Sound
MTS
:
:
:
:
Off
On
Off
Off
Press the ▲ or ▲ button
to select “Sound” menu,
ˇ
Stereo
ˆ
then press the ˇ or
ˆ
Move
Select
Exit
button.
2
Sound
Press the ˇ or ˆ button
repeatedly to select the
“Standard”, “Music”,
“Movie”, “Speech” or
“Custom” sound settings.
Mode
Auto Volume
Melody
Surround
Turbo Sound
MTS
ˇ
Standard
ˆ
ˆ
:
:
:
:
Off
On
Off
Off
ˇ
Stereo
Move
Select
Exit
Press the EXIT button to
exit.
•
•
•
•
•
Choose Standard for the standard factory settings.
Choose Music when watching music videos or concerts.
Choose Movies when watching movies.
Choose Speech when watching a show that is mostly dialogue (i.e., news).
Choose Custom to recall your personalized settings.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIO N
Setting the Clock
1
Function
English
Press the MENU button to
Language
ˇ
ˆ
ˆ
ˆ
display the on-screen
Time
Caption
menu.
Press the ▲ or ▲ button
to select “Function”, then
press the ˇ or ˆ button.
Move
Select
Exit
2
Function
- - am
Press the ▲ or ▲ button
Time
to select “Time”, then
Clock
- -
:
press the ˇ or ˆ button.
The Time menu will
On time
Off time
- -
- -
:
:
- - am Off
- - am Off
appear on the screen, and
“Clock” will be selected.
Move
Select
Exit
When selecting the hours, be sure
to select the proper time of day (AM
or PM).
3
Function
Press the ˇ or ˆ button
Time
again (the hours digits will
Clock
10 : 00 am
be selected).
Press the ▲ or ▲ button
repeatedly until the cor-
rect hour appears.
On time
Off time
- -
- -
:
:
- - am Off
- - am Off
You can change the hours by pressing
▲ or ▲ repeatedly (or by holding
down either of these buttons).
Move
Select
Exit
The time will appear every time
you press the INFO button.
4
Function
After the hour is entered,
Time
press the ˆ button. (at
Clock
10 : 30 am
this point the minutes dig-
its will be selected.)
On time
Off time
- -
- -
:
:
- - am Off
- - am Off
Press the ▲ or ▲ button
to select the correct min-
utes.
Move
Select
Exit
Press the EXIT button to
exit.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIO N
View ing a VCR or Cam corder Tape
You must select the appropriate mode in order to view the VCR or
Camcorder signal on the TV.
1
Channel
Press the MENU button to
ANT/CATV
Auto Program
TV/AV
Fine Tune
Add/Erase
ˇ
ˇ
ANT
TV
ˆ
ˆ
ˆ
ˆ
ˆ
display the menu.
Press the ▲ or ▲ button
to select “Channel”, then
press the ˇ or ˆ button.
Move
Select
Exit
2
Channel
ANT
Press the ▲ or ▲ button
to select the “TV/AV”.
ANT/CATV
Auto Program
TV/AV
Fine Tune
Add/Erase
ˇ
ˆ
ˆ
ˆ
ˆ
ˆ
ˇ
TV
Move
Select
Exit
3
Channel
ANT
Press the ˇ or ˆ button .
You will switch between
viewing the signals com-
ing from equipment con-
nected to the TV’s A/V
jacks, and the TV signal.
ANT/CATV
Auto Program
TV/AV
Fine Tune
Add/Erase
ˇ
ˆ
ˆ
ˆ
ˆ
ˆ
ˇ
AV1
Move
Select
Exit
Press the EXIT button to
exit.
Alternate method:
Simply press the
TV/VIDEO button on
the remote control to
select an External
Signal Source.
AV1
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Ch a p t e r Fo u r
SPECIAL FEATURES
Fine Tuning Channels
Use fine tuning to manually adjust a particular channel for optimal reception.
1
Channel
Press the MENU button to
ANT/CATV
Auto Program
TV/AV
Fine Tune
Add/Erase
ˇ
ˇ
ANT
TV
ˆ
ˆ
ˆ
ˆ
ˆ
display the menu.
Press the ▲ or ▲ button
to select “Channel”, then
press the ˇ or ˆ button.
Move
Select
Exit
2
Channel
Press the ▲ or ▲ button
to select “Fine tune”, then
press the ˇ or ˆ button.
Fine Tune
Select
:
:
0
Erased
Move
Select
Exit
3
Channel
Press the ˇ and ˆ but-
tons to adjust the fine tun-
ing.
Fine Tune
Select
:
:
+
3
Erased
Move
Adjust
Exit
After you adjust the fine tuning,
“*” will appear when you press the
INFO button while watching this
channel.
4
To store the fine tuning
setting in the TV’s memo-
ry, press the ▲ or ▲ but-
ton to select “Select”.
Press the ˇ or ˆ button
to select “Added”.
Channel
Fine Tune
Select
:
:
+
3
Added
Move
Select
Exit
To reset the fine tuning to
“0”, press the ˇ or ˆ but-
ton to select “Erased”.
Press the EXIT button to
exit.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
Selecting the Color Tone
1
Picture
Press the MENU button to
Mode
ˇ
Dynamic
ˆ
ˆ
Adjust
Color Tone
Size
display menu.
:
:
Cool
Normal
Press the or
ˇ
ˆ
button to
select “Picture”.
Move
Select
Exit
2
Picture
Press the ▲ or ▲ button
Mode
ˇ
Dynamic
ˆ
ˆ
Adjust
Color Tone
Size
to select "Color Tone".
:
:
Cool
Normal
Move
Select
Exit
3
Picture
Press the ˇ or ˆ button
repeatedly to select
“Cool”, “Normal” or “
Warm”.
Mode
ˇ
Dynamic
ˆ
ˆ
Adjust
Color Tone
Size
:
:
Normal
Normal
Press the EXIT button to
exit.
Move
Select
Exit
30
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
Changing the Screen Size
1
Picture
Press the MENU button to
Mode
ˇ
Dynamic
ˆ
ˆ
Adjust
Color Tone
Size
display menu.
:
:
Cool
Normal
Press the or
ˇ
ˆ
button to
select “Picture”.
Move
Select
Exit
2
Picture
Press the ▲ or ▲ button
Mode
ˇ
Dynamic
ˆ
ˆ
Adjust
Color Tone
Size
to select "Size".
:
:
Cool
Normal
Move
Select
Exit
Picture
3
Press the ˇ or ˆ button
repeatedly to select
“Normal” or “Zoom”.
Mode
Adjust
Color Tone
Size
ˇ
Dynamic
ˆ
ˆ
:
:
Cool
Zoom
Press the EXIT button to
exit.
Move
Select
Exit
•
•
Normal : Sets the picture to 4:3 normal mode. This is a standard TV screen size.
Zoom : Magnifies the size of the picture on screen.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
Using the Surf Feature
This feature allows you to set the TV to return to a particular channel after a certain
amount of time. For example, you may be watching a channel when commercials
start. You can set the Surf to “5 minutes”, then switch channels. After 5 minutes,
the TV will return to the original channel. To use the Surf:
1
Surf
Off
While you are watching
the channel to which you
want to return, press the
R.SURF button. The on-
screen display will read
“Surf off”.
The time will be decreasing while
you are setting up the timer. And you
will reset it when you pass five min-
utes or turn it off.
2
Surf
1: 30
Press the R.SURF button
again to set the timer in
thirty second intervals, up
to five minutes.
3
The time you set will begin counting down on the screen.
When the time runs out, the TV will return to the channel you
were watching when you set the timer.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
Choosing a Multi-Channel Sound (MTS)
Soundtrack
Depending on the particular program being broadcast, you can listen to stereo, mono or
a Separate Audio Program. (SAP audio is usually a foreign-language translation.
Sometimes SAP has unrelated information like news or weather.)
1
Sound
Press the MENU button to
Mode
Adjust
ˇ
Custom
ˆ
ˆ
display the menu.
Auto Volume
Melody
Surround
Turbo Sound
MTS
:
:
:
:
Off
On
Off
Off
Press the ▲ or ▲ button
to select “Sound” menu,
ˇ
Stereo
ˆ
then press the ˇ or
ˆ
Move
Select
Exit
button.
2
Sound
Custom
Press the ▲ or ▲ button
Mode
Adjust
Auto Volume
Melody
Surround
Turbo Sound
MTS
ˇ
ˆ
ˆ
to select “MTS”.
:
:
:
:
Off
On
Off
Off
ˇ
Stereo
ˆ
Move
Select
Exit
The text at the bottom of the
menu tells you if the incoming
audio is stereo, SAP or mono.
3
Sound
Custom
Press the ˇ or ˆ button
to select “Mono”, “SAP”
or “Stereo”.
Mode
Adjust
Auto Volume
Melody
Surround
Turbo Sound
MTS
ˇ
ˆ
ˆ
:
:
:
:
Off
On
Off
Off
ˇ
SAP
ˆ
Press the EXIT button to
exit.
Move
Select
Exit
Alternate method:
Simply press the MTS but-
ton on the remote control
to change the MTS set-
ting.
MTS
Signal
: Stereo
: Stereo
•
•
Choose Stereo for channels that are broadcasting in stereo.
Choose Mono for channels that are broadcasting in mono, or if you are
having difficulty receiving a stereo signal.
•
Choose SAP to listen to the Separate Audio Program, which is usually a
foreign-language translation.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
Extra Sound Settings
• Auto Volume
Each broadcasting station has its own signal conditions, and so it is not easy for you to
adjust the volume every time the channel is changed. “Auto Volume” lets you automat-
ically adjust the volume of the desired channel by lowering the sound output when
the modulation signal is high or by raising the sound output when the modulation sig-
nal is low.
• Melody
You can set a melody to sound when the TV is powered On or Off.
• Surround
“Surround” converts a mono or stereo signal into simulated surround sound.
Once the “Surround” is set to “On”, the setting applies to sound effects such as
Standard, Music, Movie and Speech.
• Turbo Sound
Turbo Sound suitably emphasizes both higher and lower bands of sound (and includes
other effects).
1
Sound
Press the MENU button to
Mode
Adjust
ˇ
Custom
ˆ
ˆ
display the menu.
Auto Volume
Melody
Surround
Turbo Sound
MTS
:
:
:
:
Off
On
Off
Off
Press the ▲ or ▲ button
to select “Sound” menu,
ˇ
Stereo
ˆ
then press the ˇ or
ˆ
Move
Select
Exit
button.
2
Sound
Custom
Press the ▲ or ▲ button
to select required item
you want.
Mode
Adjust
Auto Volume
Melody
Surround
Turbo Sound
MTS
ˇ
ˆ
ˆ
:
:
:
:
Off
On
Off
Off
ˇ
Stereo
ˆ
Move
Select
Exit
3
Sound
Custom
Press the ˇ or
ˆ
button
Mode
Adjust
Auto Volume
Melody
Surround
Turbo Sound
MTS
ˇ
ˆ
ˆ
to select “On" or "Off".
:
:
:
:
On
On
Off
Off
Press the EXIT button to
exit.
ˇ
Stereo
ˆ
Move
Select
Exit
Alternate method (Turbo
Sound):
Simply press the TURBO
button on the remote con-
trol to change the turbo
sound setting.
Turbo Sound
:
On
34
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
Setting the On/ Off Tim er
Before using the timer, you must
set the TV’s clock. (See “Setting the
Clock” on page 27).
1
Function
Press the MENU button to
Language
Time
Caption
ˇ
English
ˆ
ˆ
ˆ
display the on-screen
menu.
Press the ▲ or ▲ button
to select “Function”, then
press the ˇ or ˆ button.
Move
Select
Exit
2
Function
Press the ▲ or ▲ button
to select “Time” then
press the ˇ or ˆ button.
The Time menu will
appear on the screen.
Time
Clock
10 : 30 am
On time
Off time
- -
- -
:
:
- - am Off
- - am Off
Move
Select
Exit
When you set the hours, make
sure the correct time of day (AM or
PM) appears to the right of the hour.
3
Function
Press the ▲ or ▲ button
to select "On time".
Time
Clock
10 : 30 am
On time
Off time
06 : 00 am Off
- -
:
- - am Off
Press the ˇ or ˆ button
to select the “On time”
hours.
Move
Select
Exit
(The hours digits will be
highlighted.)
Press the ▲ or ▲ button
repeatedly to select the
appropriate hours (i.e., the
hour when the TV will turn
on.)
4
Function
Press the ˆ button to
select the “On time” min-
utes.
Time
Clock
10 : 30 am
On time
Off time
06 : 30 am Off
- -
:
- - am Off
(The minutes digits will be
highlighted.)
Move
Select
Exit
Press the ▲ or ▲ button
to select the appropriate
minutes.
Continued...
35
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
To deactivate the “On time”,
select “Off” during this step.
5
Function
Press the ˆ button to
select “On/Off”.
Time
Clock
10 : 30 am
06 : 30 am On
On time
Off time
- -
:
- - am Off
Press the ▲ or ▲ button to
turn the on-timer “On”.
(Repeatedly pressing the ▲
or ▲ button will alternate
between on and off.)
Move
Select
Exit
6
When finished, press the ˆ
button .
7
Function
To set the Off time, press
the ▲ or ▲ button to
select “Off time”.
Time
Clock
10 : 30 am
On time
Off time
06 : 30 am On
- -
:
- - am Off
Press the ˆ button and
set the hours and minutes.
(Follow the same proce-
dure as in steps 3-6
above.)
Move
Select
Exit
Press the EXIT button to
exit.
Setting the Sleep Tim er
The sleep timer automatically shuts off the TV after a preset time
(from 10 to 180 minutes).
After about 5 seconds, the sleep
Press the SLEEP button
repeatedly until the appro-
priate time interval
appears (any of the preset
values from “Off” to
“180”).
display will disappear from the
screen, and the time interval will be
set.
Sleep Timer
:
30
36
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
View ing Closed Captions
Your TV decodes and displays the closed captions that are broadcast with certain TV shows.
These captions are usually subtitles for the hearing impaired or foreign-language translations.
All VCRs record the closed caption signal from television programs, so home-recorded video
tapes also provide closed captions. Most pre-recorded commercial video tapes provide closed
captions as well. Check for the closed caption symbol in your television schedule and on the
tape’s packaging:
.
1
Function
English
Press the MENU button to
display the on-screen
menu.
Language
Time
Caption
ˇ
ˆ
ˆ
ˆ
Press the ▲ or ▲ button
to select “Function”, then
press the ˇ or ˆ button.
Move
Select
Exit
2
Function
Press the ▲ or ▲ button
to select the “Caption”,
Caption
Mode
Channels
Field
:
:
:
:
Off
Caption
1
1
then press the ˇ or
ˆ
button.
Move
Select
Exit
Misspellings and unusual
characters sometimes occur during
closed caption transmissions, especial-
ly those of live events. There may be a
small delay before captions appear
when you change channels. These are
not malfunctions of the TV.
3
Function
On
Caption
1
1
Press the ˇ or ˆ button
to turn closed captioning
on/off.
Caption
Mode
Channels
Field
:
:
:
:
Move
Select
Exit
In caption mode, captions
appear at the bottom of the screen,
and they usually cover only a small
portion of the picture.
4
Function
On
Caption
1
1
Press the ▲ or ▲ button
to select “Mode”.
Caption
Mode
Channels
Field
:
:
:
:
In text mode, information unrelated
to the program, such as news or
weather, is displayed. Text often
covers a large portion of the screen.
Press the ˇ or ˆ button
to select “Caption” or
“Text”.
Move
Select
Exit
Different channels and fields
display different information: Field 2
carries additional information that
supplements the information in
Field 1. (For example, Channel 1
may have subtitles in English, while
Channel 2 has subtitles in Spanish.)
5
Depending on the particular broadcast, it might be necessary to
make changes to “Channels” and “Field”:
Use the ▲, ▲, ˇ and ˆ buttons to make the changes. (Follow
the same procedure as in steps 3~4 above.)
Press the EXIT button to exit.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Ch a p t e r Fiv e
TRO UBLESHO O TING
If the TV seems to have a problem, first try this list of possible problems and solutions.
If none of these troubleshooting tips apply, then call your nearest service center.
Identifying Problem s
Problem
Possible Solution
Poor picture
Try another channel.
Adjust the antenna.
Check all wire connections.
Poor sound quality.
No picture or sound.
Try another channel.
Adjust the antenna.
Try another channel.
Press the TV/VIDEO button.
Make sure the TV is plugged in.
Check the antenna connections.
No color, wrong colors or tints.
Make sure the program is broadcast in color.
Adjust the picture settings.
If the set is moved or turned in a different
direction, the power should be OFF for
at least 30 minutes.
Picture rolls vertically.
The TV operates erratically
The TV won’t turn on.
Adjust the antenna.
Check all wire connections.
Unplug the TV for 30 seconds, then try
operating it again.
Make sure the wall outlet is working.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
Cleaning and Maintaining Your TV
With proper care, your TV unit will give you many years of service. Please follow these
guidelines to get the maximum performance from your TV.
Placem ent
•
•
Do not place the TV near extremely hot, cold, humid or dusty places.
Do not place the TV near appliances with electric motors that create magnetic fields,
such as vacuum cleaners.
•
•
Keep the ventilation openings clear; do not place the TV on a soft surface, such as
cloth or paper.
Place the TV in a vertical position only.
Liquids
•
Do not handle liquids near or on the TV. Liquids that spill into it can cause serious
damage.
Cabinet
•
•
Never open the cabinet or touch the parts inside.
Wipe your TV with a clean, dry cloth. Never use water, cleaning fluids, wax, or
chemicals.
•
Do not put heavy objects on top of the cabinet.
Tem perature
•
If your TV is suddenly moved from a cold to a warm place, unplug the power cord,
and allow at least two hours for moisture that may have formed inside the unit to dry
completely.
Using Your TV in Another Country
If you plan to take your TV with you to a foreign country, please be aware of the different
television systems that are in use around the world. A TV designed for one system may
not work properly with another system due to differences in the TV channel frequencies.
Specifications
CL21K30MQ / CL21K30M16
100-240V AC
Model
Voltage
50/60Hz
Frequency of Operation
Dimensions (mm/inches)
Weight (Kg/ lbs)
675 x 587 x 580 / 26.58 x 23.11 x 22.84
25.70 / 56.66
39
Download from Www.Somanuals.com. All Manuals Search And Download.
|