LED TV
quick start guide
1. Accessories and Cables
Accessories
The following accessories are included with your TV:
• Remote Control (AA59-00600A) & Batteries (AAA x 2)
• Warranty Card / Safety Guide
• Owner’s Guide
• Quick Start Guide
• Wire-Holder Stand (BN61-05491A)
• Power Cord
Input Cables (Sold Separately)
You will need one or more of theses cables to connect your TV to your antenna or cable outlet and your peripheral
devices (Blu-ray players, DVD players, etc.)
• Audio
• Component
• Composite (AV)
• Coaxial (RF)
• HDMI
• HDMI-DVI
✎
Make sure you have the correct cable before plugging it in. Illustrations of common plugs and jacks are below.
Cable Plugs
Ports/Jacks
HDMI
USB
Optical
Do not plug a cable in upside down.
Make sure the orientation of the plug is correct before plugging it in.
BN68-04501A-00
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Making Connections
Connect your TV to an antenna or cable connection, and then connect your peripherals. When done, connect the
power cord to the TV, and then connect the power cord to an AC wall outlet. If you are connecting your TV to a cable
or satellite box using HDMI, Component, or Composite connections, you do not need to connect the ANT IN jack to an
antenna or a cable connection.
y For the best picture and audio quality, connect digital devices
y PC/DVI AUDIO IN input is not supported.
using an HDMI cable.
y For an HDMI to DVI cable connection, you must use the HDMI
y If you connect an external device to the TV that uses an older
version of HDMI, the video and audio may not work. If this
occurs, ask the manufacturer of the device about the HDMI
version and, if it is out of date, request an upgrade.
IN 1(DVI) jack.
y For PCs with DVI video out jacks, use an HDMI to DVI cable to
connect the DVI out on the PC to the HDMI IN 1 jack on the TV.
Use the PC's speakers for audio.
y Be sure to purchase a certified HDMI cable. Otherwise, the
picture may not display or a connection error may occur.
y EX-LINK: Connector for service only.
AV Device (1)
Using an HDMI Cable
(up to 1080p)
y The side panel may differ depending on the model.
HDMI OUT
TV Side Panel
Blu-ray player / DVD /
cable box / sat box
Power Input
DVI OUT
Audio Device (1)
Using an Audio (Analog) Cable
HDMI OUT
TV Rear Panel
AUDIO IN
PC
R-AUDIO-L
DVD / Home Theater
PC
Using an HDMI Cable or an
HDMI to DVI Cable. Use the
PC speakers for audio.
VHF/UHF Antenna
R
W
Y
R
W
R
B
G
Media Play
or
ANT OUT
Using a USB Drive
Cable
G
R
W
Y
R
W
R
B
AV Device (2)
Using Audio/Video
Cables
AV Device (3)
Using a Component
Cable (up to 1080p)
Audio Device (2)
Using an Optical (Digital) Cable
AUDIO OUT
VIDEO OUT
AUDIO OUT
COMPONENT OUT
OPTICAL
R-AUDIO-L
R-AUDIO-L
PR
PB
Y
Digital Audio System
VCR
Blu-ray player
Download from Www.Somanuals.com. All Manuals Search And Download.
4. The Remote Control
Learn where the function buttons are on your remote. Especially note POWER, SOURCE, VOL, CH, MENU, TOOLS,
ENTER, CH LIST, RETURN and EXIT.
Displays and selects the available video
sources.
Turns the remote control light on or
Turns the TV on and off.
off. When on, the buttons become
illuminated for a moment when
pressed. (Using the remote control with
this button set to On will reduce the
battery usage time.)
Press to access channels directly.
Press to select additional digital
Returns to the previous channel.
channels being broadcasted by the
same station. For example, to select
channel ‘54-3’, press ‘54’, then press
Cuts off the sound temporarily.
‘-’ and ‘3’.
Changes channels.
Adjusts the volume.
Displays the channel list on the
Displays the main on-screen menu.
screen.
Displays Media Play.
Automatically shuts off the TV at a
preset time.
MEDIA.P
SLEEP
Quickly select frequently used
functions.
Displays information on the TV screen.
ENTERE
and Direction buttons.
Select the on-screen menu items and
change the values seen on the menu.
Exit the menu.
Returns to the previous menu.
Use these buttons according to the
directions on screen.
P.SIZE: Lets you choose the picture
size.
Use these buttons in a specific feature.
MTS: Press to choose stereo, mono
or Separate Audio Program (SAP
broadcast).
CC: Controls the caption decoder.
✎
This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually
impaired persons.
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Configuring the Basic Settings with Plug & Play
When you turn the TV on for the first time, a sequence of prompts and screens will assist you in configuring basic
settings. Before you begin, make sure you have connected the TV to an antenna or a cable connection and that the TV
is plugged in. See "Connections" for instructions. To begin Plug and Play, press the POWER button on your remote.
✎
Plug & Play is available only when the Input source is set to TV. See "Changing the Input Source".
1. Start Screen → Select a Language
After you press the POWER button, the Start Screen appears. Press the
ENTER button on your remote to continue.
Plug & Play
E
Select Language of the OSD.
English
On the Language screen, press the ENTER
E
button. Use the
Language
Español
Français
▲/▼buttons to select a language, and then press ENTER
E
again.
U
Move
E
Enter
2. Select the Home Use Mode
On the Home Use screen, press ENTER
E
to select the Home Use
Plug & Play
mode.
Select ‘Home Use’ when installing this TV in your home.
✎
Store Demo mode is for retail environments only.
Store Demo
Home Use
Move
L
E Enter
3. Select the Antenna Source
On the Antenna Source screen, select the source of your TV signal.
Plug & Play
Select the Antenna source to memorize.
Air
Air
Start
If your TV is connected to an antenna Choose Air, and then press
ENTER
E. The TV will automatically start memorizing channels. When it
Start
Start
Cable
Auto
is done, go to "Set the Clock Mode".
Cable
If your TV is connected to a cable outlet, choose Cable, and then press
ENTERE. Go to "Select the Cable Type".
U
Move
E
Enter
m
Skip
Auto
✎
If you have connected a cable or
If you choose Auto, and then press ENTER
E, the TV will automatically
satellite box to an HDMI, Component,
Composite, or Antenna input, and you
will use the box to select channels, press
select the correct Antenna source. Go to "Select the Cable Type"
the Menu (
m) button on your remote to
skip this step.
4. Select the Cable Type
On the Cable Type screen, use the ◄/►/▲/▼ buttons to select the type
of digital and analog cable systems you have: STD, HRC, or IRC. Most
systems are STD (Standard). When done, select Start, and then press
Auto Program
Select the cable system.
ENTER
E. The TV will start memorizing channels.
Analog
Digital
STD
STD
HRC
HRC
IRC
IRC
✎
Channel memorization can take up to 45 minutes, depending on
your cable system.
START
✎
Memorized channels are added to the Added Channel list. These are
the channels you will see when you use the Channel buttons on your
remote.
U
Move
E
Enter
R Return
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Set the Clock Mode
Press ENTER
E
and select Auto or Manual, and then press ENTERE
Plug & Play
Set the Clock Mode.
again.
If you selected Auto:
The TV will automatically download the correct time from a digital channel.
Clock Mode
: Auto
The DST (Daylight Savings Time) screen will appear. Press ENTER
E.
Select On if you want to turn the DST adjustment on and off manually.
E
Enter
m
Skip
Select Off to turn off the DST adjustment. Select Auto if you want the TV
to adjust to DST automatically. Press ENTER
E
when done.
The Time Zone screen will appear. Use the▲/▼ button to select your
Time Zone, and then press ENTER
E.
If you selected Manual:
The Clock Set screen appears. Use the ▲/▼ buttons to change the
values in each field or use the number buttons to enter the values directly.
Use the ◄/►/ buttons to move from field to field. When done with all the
fields, press ENTER
E.
6. View the HD Connection Guide
See the best way to connect a cable or satellite box for the highest quality HD pictures. Press the ENTER
E
button to
close the guide.
7. Enjoy your TV.
Press the ENTER
E
button.
✎
To set or unset Store Demo mode outside of Plug & Play, press and release the Controller when the power is
on. The Function menu screen appears. Push the Controller to the left (to MENU ( )) and hold for more than 5
m
seconds. The Store Demo mode is set. To cancel Store Demo, bring up the Function menu using the Controller,
push the Controller to the right (to Source(
)) and hold for more than 5 seconds.
6. Changing the Input Source
Source List
When you are watching TV and you want to watch a movie on your DVD player or Blu-ray player or switch to your cable
box or STB satellite receiver, you need to change the Source.
1. Press the SOURCE button on your remote.
2. Use the ▲/▼ buttons to select an external input source.
■■TV / AV / Component / HDMI1/DVI / HDMI2
✎
You can only choose external devices that are connected to the TV. In the Source List, connected inputs are
highlighted.
How to Use Edit Name
Edit Name lets you associate a device name to an input source. To access Edit Name, press the TOOLS button when
the Source List is displayed The following selections appear under Edit Name:
■■VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI / TV /
IPTV / Blu-ray / HD DVD / DMA: Select the name of the device connected to specific input jacks to make your input
source selection easier.
✎
✎
If you connect a PC to the HDMI IN 1 (DVI) port with an HDMI cable, assign PC to HDMI 1 in Edit Name.
If you connect a PC to the HDMI IN 1 (DVI) port with an HDMI to DVI cable, assign DVI PC to HDMI 1 in Edit
Name.
✎
If you connect an AV device to the HDMI IN 1 (DVI) port with an HDMI to DVI cable, assign DVI to HDMI 1 in Edit
Name.
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Accessing and Using the Main Menu
Your TV's Main menu contains functions that let you control many of the TV's features. For example, in the Main menu
you can change the size and configuration of the picture, its brightness, its contrast and so on. There are also functions
that let you control the TV's sound, channel configuration, energy use, and a host of other features. To access the main,
on-screen menu, press the MENU (m) button on your remote.
To use the Main menu, press the ▲/▼ buttons to move between the main option categories: Picture, Sound, Channel,
etc. Each time you press a ▲/▼ button, the main category name on the left side of the menu changes.
To select a menu option in one of the categories, press the ► button or the ENTER
ENTER to see the values or choices associated with that option. Usually, you would then press ENTER
E
button. Press it again or press
to select
E
E
a value or choice. Press the RETURN button or the ◄ button to return to a previous screen or selection.
8. Using the TV's Controller (Panel Key)
The TV's Controller, a small joy stick like button on the bottom right side of the TV, lets you control the TV without the
remote control.
Function menu
MEDIA.P
m
R
s
P
Return
TV Controller
Remote control sensor
Power on
Turn the TV on by pressing the Controller when the TV is in standby mode.
Adjusting the
volume
Adjust the volume by moving the Controller from side to side when the power is on.
Selecting a
channel
Select a channel by moving the Controller backwards and forwards when the power is on.
Using the
Function menu
To view and use the Function menu, press and release the Controller when the power is on. To
close the Function menu, press and release the Controller again.
With the Function menu visible, select MEDIA.P by moving the Controller backwards. The
Media Play main screen appears. Select a media source by moving the Controller back
and forth, and then pressing the Controller.
Selecting
Media Play
With the Function menu visible, select the MENU (
m) by moving the Controller to the left. The
Selecting the
OSD (On Screen Display) Menu appears. Select an option by moving the Controller to the right.
Move the Controller to the right or left, or backwards and forwards to make additional selections.
To change a parameter, select it, and then press the Controller.
MENU (m)
Download from Www.Somanuals.com. All Manuals Search And Download.
With the Function menu visible, open the Source List (s) by pushing the Controller to the
right. The Source List screen appears. To select a source, move the Controller back and forth.
When the source you want is highlighted, press the Controller.
Selecting a
Source (s)
With the Function menu visible, select Power Off (
then press the Controller.
P) by pulling the Controller forwards, and
Power Off (P)
✎
✎
To close the Menu, Media Play List, or Source List, press the Controller for more than 1 second.
When selecting the function by moving the controller to the up/down/left/right directions, be sure not to press the
controller. If you press it first, you cannot operate it to move the up/down/left/right directions.
9. Important Safety Information
Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your
children do not hang over or destabilize the TV. Doing so may cause the TV to tip over, resulting in serious
injuries or death. Follow all safety precautions provided on the included Safety Flyer.
10. Questions? Comments?
Contact SAMSUNG WORLDWIDE
If you have any questions or comments about your Samsung TV, please contact the SAMSUNG customer care center.
Country
Address
CANADA
U.S.A
Samsung Electronics Canada Inc.,
Customer Service
Samsung Electronics America, Inc.
85 Challenger Road
55 Standish Court Mississauga
Ontario L5R 4B2 Canada
Ridgefield Park, NJ 07660-2112
Customer Care
Center
1-800-SAMSUNG (726-7864)
Web Site
Download from Www.Somanuals.com. All Manuals Search And Download.
|