COLOR
TELEVISION
CS29A10/29A11/29A20/29Z6/29Z7
WS32A10/32A11/32A20/32Z6/32Z7
CS34A10/34A11/34A20/34Z6/34Z7
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
PICTURE IN PICTURE
TELETEXT
(OPTION)
WISE LINK
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
◆ CONNECTING AND PREPARING YOUR TELEVISION
■
■
■
■
■
■
■
■
■
■
View of Your Television (depending on the model).......................................
Infrared Remote Control (depending on the model)......................................
Inserting the Batteries in the Remote Control................................................
Connecting to an Aerial or Cable Television Network ...................................
Switching Your Television On and Off...........................................................
Placing Your Television in Standby Mode.....................................................
Becoming Familiar with the Remote Control .................................................
Plug & Play Feature.......................................................................................
Viewing the Demonstration............................................................................
Choosing Your Language..............................................................................
5
7
9
9
10
10
11
12
13
13
◆ SETTING THE CHANNELS
■
■
■
■
■
■
Storing Channels Automatically.....................................................................
14
15
16
18
19
20
Sorting the Stored Channels .........................................................................
Storing Channels Manually............................................................................
Skipping Unwanted Channels .......................................................................
Assigning Names to Channels ......................................................................
Fine Tuning Channel Reception....................................................................
◆ USING YOUR TELEVISION
Using the LNA (Low Noise Amplifier) feature (depending on the model)......
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
21
21
22
23
23
24
25
25
26
26
27
28
29
30
31
32
33
34
35
36
Changing the Picture Standard .....................................................................
Adjusting the Picture Settings (depending on the model)..............................
Selecting the Color Tone...............................................................................
Selecting the Picture Size (depending on the model)....................................
Extra Picture Settings (depending on the model)..........................................
Setting the Blue Screen.................................................................................
Using the Tilt Control Feature........................................................................
Freezing the Current Picture .........................................................................
Changing the Sound Standard ......................................................................
Adjusting the Sound Settings ........................................................................
Extra Sound Settings (depending on the model)...........................................
Selecting the Melody .....................................................................................
Selecting the Sound Mode (depending on the model) ..................................
Setting and Displaying the Current Time.......................................................
Setting the Sleep Timer.................................................................................
Switching the Television On and Off Automatically.......................................
Setting the Preferred Volume Level/Channel ................................................
Viewing an External Signal Source/Edit Name (depending on the model)....
Viewing the Picture In Picture (PIP) (depending on the model) ....................
English - 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents(continued)
◆ USING THE WISE LINK (DEPENDING ON THE MODEL)
■
■
■
■
■
■
■
■
■
Using Wise Link (depending on the model)...................................................
Switching to WISE LINK Mode (depending on the model)............................
Selecting Image (JPEG) Files/Music (MP3) Files (depending on the model) ...........
Picture (JPEG) Playback (depending on the model).....................................
Rotating the Picture (JPEG) (depending on the model) ................................
Picture Zoom (JPEG) (depending on the model) ..........................................
Music File (MP3) Playback (depending on the model)..................................
Playback All JPEG/MP3 Files (depending on the model)..............................
WISE LINK Menu Setup (depending on the model)......................................
38
40
41
42
43
43
44
45
46
◆ USING THE TELETEXT FEATURE
■
■
■
■
■
Teletext Feature ............................................................................................
48
48
49
50
50
Displaying the Teletext Information ...............................................................
Selecting a Page by Number.........................................................................
Using FLOF to Select a Page........................................................................
Storing Teletext Pages ..................................................................................
◆ ADDITIONAL INFORMATION ON CONNECTIONS
■
■
■
■
■
■
■
■
Connecting to the External Input/Outputs......................................................
Connecting to the DVD Player (depending on the model).............................
Connecting to the Audio Output ....................................................................
Connecting to the Active Sub Woofer Speaker(depending on the model) ....
Connecting to the RCA Input.........................................................................
Connecting to the S-Video Input....................................................................
Connecting to the PC Input (depending on the model) .................................
Viewing Pictures From External Sources (depending on the model) ............
51
52
53
53
54
54
55
56
◆ RECOMMENDATIONS FOR USE
■
Automatic Degaussing to Remove Color Patches.........................................
56
57
■
Troubleshooting: Before Contacting Service Personnel................................
Symbols
☛
➢
Press
Important
Note
English - 4
Download from Www.Somanuals.com. All Manuals Search And Download.
View of Your Television(depending on the model)
The actual configuration on your TV may be different, depending on
your model.
➢
Control Panels
10
9
8
3
2
1
7
6
5
4
11
7
6
7
6
5
4
1
2
3
5
4
2
1
1
2
3
7
3
6
5
4
1) Standby Indicator
5) Volume Adjustment
6) Menu Display
2) Remote Control Sensor
3) Power On/Off
7) Input Source Selection
4) Channel Selection
W.LINK Mode
10)
:
Used to move to the previous
page.
8) MOVE : Used to move between
items.
11) Memory Card Slot : Insert the
9)
:
Used to execute the selected
item.
memory card into the slot.
You can use the Volume button on the remote control to control the volume
while in Wise Link mode. (You cannot control the volume on the front control
panel of TV.)
☛
English - 5
Download from Www.Somanuals.com. All Manuals Search And Download.
View of Your Television(depending on the model) (continued)
Connection Panels
Side of the TV (depending on the model)
Audio Input (R, L)
Audio Input (R, L)
Video Input
Video Input
S-Video Input
S-Video Input
PC Video Input
Rear of the TV (depending on the model)
Œ
´
MONITOR OUT (VIDEO / L-AUDIO-R)
¨ VHF/UHF (75Ω)
Outputs for external devices.
75Ω Coaxial connector for Aerial/Cable
Network.
AV-1 INPUT (VCR) -VIDEO/AUDIO(L/R)
AV 2 INPUT(VCR) -VIDEO/AUDIO(L/R)
Inputs or outputs for external devices,
such as VCR, DVD, video game device,
or video disc players.
ˆ SCART- EXT 1(RGB)/EXT 2(AV)
Inputs or outputs for external devices,
such as VCR, DVD, video game device,
or video disc players.
ˇ COMPONENT 1 INPUT (DVD)/
COMPONENT 2 INPUT (DVD)
VIDEO (Y/PB/PR) and AUDIO (L/R) inputs
for Component.
Ø
MONITOR AUDIO OUT
Audio Output for external devices.
∏
SUB-WOOFER SPEAKER OUT
Connect for active subwoofer speaker.
Available format for Component inputs ;
480i, 480p, 576i, 576p, 1080i - 50Hz
➢
English - 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Infrared Remote Control (depending on the model)
TELEVISION STAND-BY
PICTURE SIZE SELECTION
SOUND MODE SELECTION
AUTOMATIC SWITCH-OFF
DIRECT CHANNEL SELECTION
ONE/TWO-DIGIT
CHANNEL SELECTION
SWITCH REPEATEDLY
BETWEEN THE LAST TWO
CHANNELS DISPLAYED
NEXT CHANNEL
VOLUME INCREASE
EXTERNAL INPUT SELECTION
TEMPORARY SOUND SWITCH-OFF
VOLUME DECREASE
PREVIOUS CHANNEL
INFORMATION DISPLAY
SETUP MENU DISPLAY(W.LINK)
(depending on the model)
EXIT FROM ANY DISPLAY
RETURN TO PREVIOUS MENU(W.LINK)
(depending on the model)
MENU DISPLAY
MOVE TO THE REQUIRED
MENU OPTION/
ADJUST AN OPTION VALUE
RESPECTIVELY
SOUND MENU DISPLAY
TURBO SOUND
CHANGE CONFIRMATION
SOUND EFFECT SELECTION
PICTURE EFFECT SELECTION
STILL PICTURE
DNIe ON/OFF/DEMO
(depending on the model)
W.LINK FUNCTION:(depending on the model)
- ROTATE
- ZOOM
- REWIND
- STOP
- PLAY/PAUSE
- FASR FORWARD
- W.LINK: TOGGLES BETWEEN WISE
LINK AND TV MODE.
The performance of the remote control may be affected by bright light.
➢
English - 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Infrared Remote Control (depending on the model) (continued)
TELETEXT DISPLAY/
MIX BOTH TELETEXT INFORMATION
AND THE NORMAL BROADCAST
TELETEXT SIZE SELECTION
TELETEXT SUB-PAGE
TELETEXT STORE
TELETEXT PAGE HOLD
SUB PICTURE(PIP)
NEXT CHANNEL
TELETEXT NEXT PAGE
TELETEXT MODE SELECTION
(LIST/FLOF)
TELETEXT PREVIOUS PAGE
TELETEXT REVEAL
PIP ON/OFF
P
EXIT FROM ANY DISPLAY
PROGRAMME
SELECTION BY NAME
SUB PICTURE(PIP)
LOCATION SELECTION
SUB PICTURE(PIP) SIZE SELECTION
SUB PICTURE(PIP) PREVIOUS
CHANNEL
P
FASTEXT TOPIC SELECTION
INTERCHANGE THE MAIN AND SUB
PICTURE (PIP)
SUB PICTURE(PIP)
SOURCE SELECTION
English - 8
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting the Batteries in the Remote Control
You must insert or replace the batteries in the remote control when
you:
◆ Purchase the television
◆ Find that the remote control is no longer operating
correctly
1
2
Remove the cover on the rear of the remote control by pressing
the symbol ( ) downwards, then pulling firmly to remove it.
Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking
care to respect the polarities:
◆
◆
-
+
on the battery against
on the battery against
-
on the remote control
+ on the remote control
3
Replace the cover by aligning it with the base of the remote
control and pressing it back into place.
Do not mix battery types, i.e. alkaline and manganese.
➢
Connecting to an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by
the set from one of the following sources:
◆ An outdoor aerial
◆ A cable television network
◆ A satellite network
1
2
In the first three cases, connect the aerial or network input cable to
the 75Ω coaxial socket on the rear of the television.
Rear of the TV
If you are using an indoor aerial, you may need to turn it when
tuning your television until you obtain a picture that is both sharp
and clear.
or
For further details, refer to:
Cable Television
Network
◆
“Storing Channels Automatically ” on page 14
“Storing Channels Manually” on page 16
◆
English - 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching Your Television On and Off
The mains lead is attached to the rear of your television.
1
2
3
Plug the mains lead into an appropriate socket.
The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
➢
Press the “ ” button (On/Off) on the front of the television.
Result:
The Standby indicator on the front of the television
lights up.
Press the POWER ( ) button on the remote control to switch the
television on.
Result:
The programme that you were watching last is re-
selected automatically.
If you have not yet stored any channels, No clear picture
appears. Refer to “Storing Channels Automatically” on page
14 or “Storing Channels Manually” on page 16.
➢
4
To switch your television off, press the “ ” button (On/Off) again.
Placing Your Television in Standby Mode
Your television can be placed in Standby mode, in order to reduce:
◆ Power consumption
◆ Wear of the cathode ray tube
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1
Press the POWER ( ) button on the remote control.
Result:
The screen is turned off and the Standby indicator on
the front of the television lights up in red.
2
To switch the television back on, simply press the POWER (
button again.
)
You can also switch on by pressing the P
or
button.
➢
Do not leave your television in Standby mode for long
periods of time (when you are away on holiday, for
☛
example). Turn your television off by pressing the “
”
button (On/Off) on the front of the television. It is best to
unplug the set from the mains and aerial.
English - 10
Download from Www.Somanuals.com. All Manuals Search And Download.
Becoming Familiar with the Remote Control
The remote control is used mainly to:
◆ Change channels and adjust the volume
◆ Set up the television using the on-screen menu system
The following table presents the most frequently used buttons and
their functions.
Button
Viewing Function
Menu Function
Used to display the next
stored channel.
-
Used to display the previous
stored channel.
-
to
Used to display the corresponding channels.
-/--
Used to select a channel numbered ten or over.
Press this button, and the “--” symbol is displayed.
Enter the two-digit channel number.
(
)
PRE-CH
Press the PRE-CH
last channel viewed.
button. The TV will switch to the
To quickly switch between two channels that are far apart,
tune to one channel, then use the number button to select
(
)
second channel. Then, use the PRE-CH
quickly alternate between them.
button to
Used to increase the
volume.
-
-
Used to decrease the
volume.
MUTE
MENU
Used to switch the sound off temporarily.
To turn the sound back on, press this button again, or
➢
press the
or
button.
Used to display the
on-screen menu system.
Used to return to the previous
menu or normal viewing.
-
Used to:
◆ Display a submenu
containing selections for
the current menu option
◆ Increase/decrease a
menu option value
-
-
Used to confirm your choice.
EXIT
TV
Used to exit from the menu
system and return to normal
viewing directly.
Used to switch the
television on when it is
in Standby mode.
Used to exit from the menu
system and return to normal
viewing directly
English - 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Plug & Play Feature
When the television is initially powered on, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
Plug & Play
1
2
If the television is in Standby mode, press the POWER ( ) button
TV
Setup
on the remote control.
Plug & Play
Language
Time
Blue Screen : Off
Melody
√
√
√
Result:
The message Plug & Playis displayed. It flickers for
a little while, then Languagemenu is automatically
displayed.
œ
English
: 0n
Select the appropriate language by pressing the œ or √ button.
Press the MENU ( ) button to enter the language.
Demonstration
√
œ √ Adjust
Skip
Result:
The message Check antenna input.is displayed.
If any language is not selected on the Languagemenu, the
Languagemenu will disappear about 30 seconds later.
➢
Check antenna input.
3
4
Make sure that the antenna is connected to the TV.
Press the œ or √ button.
œ √ Move
Skip
Result:
The Auto Storemenu is displayed with Areais
selected.
TV
Auto Store
Area
Search
œ
ASIA/W.EUROPE
√
Select your country by pressing the œ or √ button. To search the
channels, select Searchby pressing the ▲ or ▼ button, then
press the œ or √ button. Press the MENU ( ) button to stop the
search.
: -/+
Result:
The Timemenu is displayed with Clockis selected.
Move
œ √ Adjust
Skip
Refer to “Storing Channels Automatically” on page 14.
➢
5
6
7
Press the œ or √ button to move to the hour or minute. Set the
hour or minute by pressing the ▲ or ▼ button.
TV
Time
--: -- am
: Off
--: -- am Off
--: -- am Off
Clock
Sleep Timer
On Timer
Refer to “Setting and Displaying the Current Time” on page
31.
➢
Off Timer
When you have finished, press the MENU ( ) button.
On Timer Volume
:
0
On Timer Channel : P 1
Result:
The message Enjoy your watching.is displayed,
then the channel which has been stored will be
activated.
Move
œ √ Adjust
Skip
If you want to reset this feature...
Enjoy your watching.
1
2
Press the MENU ( ) button.
TV
Setup
Press the ▲ or ▼ button to select Setup, then press the
ENTER (
) button.
Plug & Play
Language
Time
√
√
: English
Result:
The Plug & Playis selected.
Blue Screen : Off
3
Press the ENTER (
) button again.
Melody
: 0n
Result:
This feature starts with the message Plug & Play
is displayed.
Demonstration
√
Move
Enter
Return
When you wish to exit from the Plug & Play, press
the EXIT (
➢
) button on the remote control.
English - 12
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Demonstration
To become familiar with the various menus provided by your
television, you can view the inbuilt demonstration.
1
2
Press the MENU ( ) button.
Result:
The main menu is displayed.
Press the ▲ or ▼ button to select Setup.
Result:
The options available in the Setupgroup are
displayed.
3
4
5
Press the ENTER (
) button.
Press the ▲ or ▼ button to select Demonstration.
TV
Setup
Plug & Play
Language
Time
Blue Screen : Off
Melody
√
√
Press the ENTER (
Result: Each of the menu options is displayed in turn.
When you wish to exit from the demonstration, press the
) button.
: English
➢
: 0n
EXIT (
) button on the remote control.
Demonstration
√
Move
Enter
Return
Choosing Your Language
When you start using your television for the first time, you must
select the language which will be used for displaying menus and
indications.
TV
Setup
Plug & Play
Language
Time
Blue Screen : Off
Melody
√
√
√
œ
English
1
2
Press the MENU ( ) button.
Result:
The main menu is displayed.
: 0n
Demonstration
√
Press the ▲ or ▼ button to select Setup.
Move
œ √ Adjust
Return
Result:
The options available in the Setupgroup are
displayed.
3
4
5
Press the ENTER (
) button.
Press the ▲ or ▼ button to select Language.
Select the appropriate language by pressing the œ or √ button
repeatedly.
English - 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing Channels Automatically
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or desired
programme numbers. However you can sort numbers manually and
clear any channels you do not wish to watch.
TV
TV
TV
Channel
Auto Store
Manual Store
Add/Delete
Sort
√
√
√
√
√
Name
1
2
Press the MENU ( ) button.
†
More
Result:
The main menu is displayed.
Move
Enter
Return
Press the ▲ or ▼ button to select Channel.
Result:
The options available in the Channelgroup are
displayed.
Auto Store
ASIA/W.EUROPE
Area
œ
√
Search
: -/+
3
4
Press the ENTER (
) button.
Result: The Auto Storeis selected.
Press the ENTER (
) button again.
Result:
The options available in the Auto Storegroup are
displayed with Areais selected.
Move
œ √ Adjust
Return
5
Select your area by pressing the œ or √ button. The countries are
displayed in the following order:
Auto Store
ASIA/W.EUROPE
-
CIS/E.EUROPE
-
CHINA
-
HONGKONG/UK
AMERICA
-
Area
Search
: ASIA/W.EUROPE
-/+
AUSTRALIA NZL/INDONESIA
-
-
SOUTH AFRICA
-
œ
√
6
7
Press the ▲ or ▼ button to select Search.
Press the œ or √ button to start the search.
Move
œ √ Search
Return
Result:
The horizontal bar is displayed, then channels are
stored in an order which reflects their positions in the
frequency range. Finally, the search will end
automatically.
➢
To stop the search before it has finished, press the MENU
) button.
(
8
When searching and storing are complete, the Sortmenu is
displayed.
P 1 C-- -----
Return
106 MHz
7 %
◆
To sort the stored channels into the desired numerical order,
go to Step 6 of the “Sorting the Stored Channels” procedure
on page 15.
◆
To exit from the channel store function without sorting the
channels, press the MENU ( ) button repeatedly until the
menus disappear.
TV
Sort
P 1
: P--
: ?
From
To
Store
œ
√
9
When the channels have been stored, you can:
◆
◆
◆
◆
◆
Sort them in the order required (refer to page 15)
Clear a channel (refer to page 18)
Assign a name to the stored channels (refer to page 19)
Fine tune channel reception if necessary (refer to page 20)
Activate the Digital Noise Reduction feature (refer to page 24)
Move
œ √ Adjust
Return
English - 14
Download from Www.Somanuals.com. All Manuals Search And Download.
Sorting the Stored Channels
This operation allows you to change the programme numbers of
stored channels. This operation may be necessary after using auto
store. You can delete the channels you do not want to keep.
TV
TV
TV
TV
Channel
Auto Store
Manual Store
Add/Delete
Sort
√
√
√
√
√
1
2
Press the MENU ( ) button.
Result:
The main menu is displayed.
Name
†
More
Press the ▲ or ▼ button to select Channel.
Move
œ √ Enter
Return
Result:
The options available in the Channelgroup are
displayed.
Channel
P 1
: P--
: ?
3
4
5
Press the ENTER (
Press the ▲ or ▼ button to select Sort.
Press the ENTER ( ) button.
) button.
From
To
Store
œ
√
Result:
The options available in the Sortgroup are displayed
with Fromis selected.
Move
œ √ Adjust
Return
6
7
Select the channel number that you wish to change by pressing
the œ or √ button repeatedly.
Sort
Press the ▲ or ▼ button to select To. Select the new channel
number which you wish to identify by pressing the œ or √ button
repeatedly.
From
To
Store
: P 1
P 3
: ?
œ
√
You can also select the channel number directly by pressing
the numeric buttons (0~9).
➢
8
9
Press the ▲ or ▼ button to select Store. Select OK to confirm the
Move
œ √ Adjust
Return
exchange of channel numbers by pressing the œ or √ button.
Result:
The selected channel is exchanged with the one
previously stored to the chosen number.
Sort
For all the channels to move to the required channel numbers,
repeat steps 6 to 8 after selecting the Fromby pressing the ▲ or ▼
button.
From
To
Store
: P 3
: P 1
OK
œ
√
Move
œ √ Adjust
Return
English - 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing Channels Manually
You can store up to 100 television channels, including those
received via cable networks.
TV
TV
TV
TV
Channel
When storing channels manually, you can choose:
Auto Store
Manual Store
Add/Delete
Sort
√
√
√
√
√
◆ Whether or not to store each of the channels found
◆ The programme number of each stored channel which
you wish to identify
Name
†
More
Move
Enter
Return
1
2
Press the MENU ( ) button.
Result:
The main menu is displayed.
Manual Store
P 1
Press the ▲ or ▼ button to select Channel.
Programme
Color System
Sound System
Search
Channel
Store
œ
√
Result:
The options available in the Channelgroup are
displayed.
: AUTO
: DK
: 0MHz
: C--
: ?
3
4
5
Press the ENTER (
Press the ▲ or ▼ button to select Manual Store.
Press the ENTER ( ) button.
) button.
Move
œ √ Adjust
Return
Result:
The options available in the Manual Storegroup are
displayed with Programmeis selected.
Manual Store
: P 1
Programme
Color System
Sound System
Search
Channel
Store
œ
AUTO
√
6
7
To assign a programme number to a channel, press the œ or √
button.
: DK
: 0MHz
: C--
: ?
Press the ▲ or ▼ button to select Color System. Indicate the
broadcasting standard required by pressing the œ or √ button
repeatedly.
Move
œ √ Adjust
Return
Result:
The color standards are displayed in the following
order:
AUTO
-
PAL
-
SECAM
-
NT4.43
-
NT3.58
Manual Store
Programme
Color System
Sound System
Search
Channel
Store
: P 1
: AUTO
8
Press the ▲ or ▼ button to select Sound System. Select the
sound standard required by pressing the œ or √ button repeatedly.
œ
DK
√
Result:
The sound standards are displayed in the following
order:
: 0MHz
: C--
: ?
BG
-
DK
-
I
-
M
Move
œ √ Adjust
Return
English - 16
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing Channels Manually (continued)
9
If you know the number of the channel to be stored, see the
following steps.
TV
TV
TV
Manual Store
Programme
Color System
Sound System
Search
: P 1
: AUTO
: DK
◆
◆
◆
Press the ▲ or ▼ button to select Channel.
Press the √ button.
: 0MHz
Press the ▲ or ▼ button to select C(Air channel) or S(Cable
channel).
Channel
Store
œ
C 1
√
: ?
◆
◆
Press the √ button.
Adjust
œ √ Move
Return
Press the ▲ or ▼ button to select indicate the required
number.
Manual Store
You can also select the channel number directly by
pressing the numeric buttons (0~9).
➢
Programme
Color System
Sound System
Search
: P 1
: AUTO
: DK
If no sound or abnormal sound, re-select the sound standard
required.
➢
œ
46MHz
√
Channel
Store
: C 1
: ?
10 If you do not know the channel numbers, select Searchby
pressing the ▲ or ▼ button. Press the œ or √ button to start the
search.
Move
œ √ Search
Return
Result:
The tuner scans the frequency range until the first
channel or the channel that you selected is received
on your screen.
Manual Store
Programme
Color System
Sound System
Search
Channel
Store
: P 1
: AUTO
: DK
: 46MHz
: C 1
11 To store the channel and associated programme number, select
Storeby pressing the ▲ or ▼ button. Press the œ or √ button to
select OK.
12 Repeat Steps 9 to 11 for each channel to be stored.
œ
OK
√
Move
œ √ Adjust
Return
Channel mode
☛
◆ P (Programme mode): When completing tuning, the
broadcasting stations in your area have been assigned to
position numbers from P00 to max P99. You can select a
channel by entering the position number in this mode.
◆ C (Real channel mode): You can select a channel by
entering the assigned number to each air broadcasting station
in this mode.
◆ S (Cable channel mode): You can select a channel by
entering the assigned number for each cable channel in this
mode.
English - 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Skipping Unwanted Channels
You can exclude the channels you chosen from the channels you
scanned. When you scan through the stored channels, those you
have chosen to skip are not displayed.
TV
TV
TV
Channel
Auto Store
Manual Store
Add/Delete
Sort
√
√
√
√
√
All of the channels that you do not specifically choose to skip are
displayed during scanning.
Name
†
More
1
2
Press the MENU ( ) button.
Move
Enter
Return
Result:
The main menu is displayed.
Press the ▲ or ▼ button to select Channel.
Add/Delete
Deleted
Result:
The options available in the Channelgroup are
displayed.
P 1
P 2
P 3
P 4
œ
√
: Deleted
: Deleted
: Deleted
3
4
5
Press the ENTER (
) button.
Press the ▲ or ▼ button to select Add/Delete.
Press the ENTER (
) button.
Move
œ √ Adjust
Return
Result: The stored channels are displayed.
Add/Delete
6
7
Press the ▲ or ▼ button to select the channel to add or erase.
If necessary, select Addedor Deletedby pressing the œ or √
button.
P 1
P 2
P 3
P 4
œ
Added
√
: Deleted
: Deleted
: Deleted
Repeat Step 6 for each channel to be added or erased.
Move
œ √ Adjust
Return
English - 18
Download from Www.Somanuals.com. All Manuals Search And Download.
Assigning Names to Channels
Channel names will be assigned automatically when channel
information is broadcast. These names can be changed, allowing
you to assign new names.
TV
TV
TV
Channel
Auto Store
Manual Store
Add/Delete
Sort
√
√
√
√
√
1
2
Press the MENU ( ) button.
Result:
The main menu is displayed.
Name
†
More
Press the ▲ or ▼ button to select Channel.
Move
Enter
Return
Result:
The options available in the Channelgroup are
displayed.
Name
3
4
5
Press the ENTER (
) button.
P 1
P 2
P 3
P 4
œ
-----
√
Press the ▲ or ▼ button to select Name.
: -----
: -----
: -----
Press the ENTER (
) button.
Result: The current channels are displayed.
Move
œ √ Adjust
Return
6
If necessary, select the channel to be assigned to a new name by
pressing the ▲ or ▼ button.
7
8
Press the ENTER (
) button.
Name
P 1
P 2
P 3
P 4
œ
A
√
Press the ▲ or ▼ button to select a letter (A~Z), a number (0~9) or
a symbol ( , space). Move on the previous or next letter by
pressing the œ or √ button.
: -----
: -----
: -----
-
9
Repeat Steps
name.
6
to
8
for each channel to be assigned to a new
Adjust
œ √ Move
Return
English - 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Fine Tuning Channel Reception
If the reception is clear, you do not have to fine tune the channel,
as this is done automatically during the search and store operation.
If the signal is weak or distorted, you may have to fine tune the
channel manually.
TV
Channel
…
More
Fine Tune
LNA
√
: Off
1
2
Press the MENU ( ) button.
Result:
The main menu is displayed.
Press the ▲ or ▼ button to select Channel.
Move
Enter
Return
Result:
The options available in the Channelgroup are
displayed.
3
4
5
6
Press the ENTER (
Press the ▲ or ▼ button to select Fine Tune.
Press the ENTER ( ) button.
) button.
Fine Tune
Reset
P 1
1
Move
œ √ Adjust
Save
Return
To obtain a sharp and clear picture and good sound quality, press
the œ or √ button.
Result:
The horizontal bar is displayed. Move the horizontal
bar’s cursor left or right by pressing the œ or √ button.
7
8
To store the fine tuning setting in the TV’s memory, press the
ENTER ( ) button.
Result:
Channel indicator turns into Red.
To erase adjusted picture or sound, select Reset by pressing the
▲ or ▼ button. Press the ENTER ( ) button.
Result:
Channel indicator returns to its original color.
English - 20
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the LNA (Low Noise Amplifier) feature (depending on the model)
This function is very useful in the situation that the TV is used in
weak signal. LNA amplifies the TV signal in the weak signal area,
but not noise. This feature is working only weak signal condition,
TV
Channel
…
More
and that is memorized on current channel, additional.
Fine Tune
LNA
√
√
œ
On
(
)
1
2
Press the MENU
button.
Result: The main menu is displayed.
Move
œ √ Adjust
Return
Press the ▲ or ▼ button to select Channel.
Result: The options available in the Channelgroup are
displayed.
3
4
5
Press the ENTER (
) button.
Press the ▲ or ▼ button to select LNA.
To activate this feature, select On by pressing the œ or √ button.
Setting the LNA option to “On” may produce worse picture
➢
quality due to the current channel’s signal condition.
Hence, apply LNA On/Off selectively according to the
picture quality that is currently displayed.
Changing the Picture Standard
You can select the type of picture which best corresponds to your
viewing requirements.
TV
Picture
Mode
Custom
œ
Dynamic
√
√
1
2
Press the MENU ( ) button.
Color Tone
Size
Scan Mode
: Normal
: Normal
: Natural
Result:
The main menu is displayed.
Press the ▲ or ▼ button to select Picture.
†
More
Result:
The options available in the Picturegroup are
displayed.
Move
œ √ Adjust
Return
3
4
Press the ENTER (
) button.
Result: The Modeis selected.
Select the required picture effect by pressing the œ or √ button
repeatedly.
Result:
The following picture effects are available:
Dynamic Standard Movie Custom
-
-
-
You can also set these options simply by pressing the
➢
P.MODE
(
;
Picture Mode) button.
English - 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Picture Settings(depending on the model)
Your television has several settings which allow you to control
picture quality.
TV
Picture
Mode
: Dynamic
1
2
Press the MENU ( ) button.
Custom
Color Tone
Size
√
: Normal
: Normal
: Natural
Result:
The main menu is displayed.
Scan Mode
Press the ▲ or ▼ button to select Picture.
†
More
Result:
The options available in the Picturegroup are
displayed.
Move
Enter
Return
3
4
5
Press the ENTER (
Press the ▲ or ▼ button to select Custom.
Press the ENTER ( ) button.
) button.
TV
Custom
Contrast
œ 70
: 55
: 50
: 50
√
Brightness
Sharpness
Color
Result:
The options available in the Customgroup are
displayed.
œ √ Adjust
Return
70
6
Press the ▲ or ▼ button to select the option (Contrast,
Brightness, Sharpness, Coloror Tint-NTSC only) to be adjusted.
Press the œ or √ button.
Move
Result:
The horizontal bar is displayed. Move the horizontal
bar’s cursor left or right by pressing the œ or √
button.
Contrast
◆ If you make any changes to these settings, the picture
➢
standard is automatically switched to Custom.
◆ The television has an “automatic degaussing” system
that is activated if magnetic interference is present. To
degauss the television screen, switch power off by
pressing the “ ” (On/Off) button on the front panel.
(Refer to “Automatic Degaussing to Remove Color
Patches” on page 56.)
English - 22
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Color Tone
1
Press the MENU ( ) button.
TV
Picture
Result:
The main menu is displayed.
Mode
: Dynamic
2
Press the ▲ or ▼ button to select Picture.
Custom
Color Tone
Size
√
√
œ Normal
: Normal
: Natural
Result:
The options available in the Picturegroup are
displayed.
Scan Mode
†
More
3
4
5
Press the ENTER (
) button.
Move
Enter
Return
Press the ▲ or ▼ button to select Color Tone.
Press the ENTER (
Result:
) button.
Color Tone
Normal
The horizontal bar is displayed. Move the horizontal
bar’s cursor left or right by pressing the œ or √
button. ( Warm 1 ~ Warm 10 - Normal - Cool 1 ~
Cool 10)
Selecting the Picture Size(depending on the model)
You can select the picture size which best corresponds to your
viewing requirements simply by pressing the “P.SIZE
Depending on the model, the following picture sizes are available:
(
)” button.
TV
Picture
Mode
Custom
Color Tone
Size
Scan Mode
: Dynamic
◆ Normal, Zoom1, Zoom2, 16:9
√
√
: Normal
œ Normal
: Natural
◆ Wide, Panorama, Zoom1, Zoom2, 4:3
Lifting is available in the Zoom1or Zoom2mode by
pressing the ▲ or ▼ button.
➢
†
More
Move
œ √ Adjust
Return
1
2
Press the MENU ( ) button.
Result:
The main menu is displayed.
Press the ▲ or ▼ button to select Picture.
Result:
The options available in the Picturegroup are
displayed.
3
4
5
Press the ENTER (
) button.
Press the ▲ or ▼ button to select Size.
Press the œ or √ button to select the picture size.
English - 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Extra Picture Settings(depending on the model)
◆ Scan Mode
You will normally find that scan mode is best set to Natural
TV
TV
TV
Picture
to reduce any slight picture flicker. However, it is possible that
some occasional broadcasts (NTSC-M) may benefit by
changing the scan mode. Natural, Digital, and
Progressivemodes are available.
Mode
: Dynamic
Custom
Color Tone
Size
√
√
: Normal
: Normal
œ Natural
Scan Mode
†
More
◆ Digital NR
If the signal received by your television is weak, you can
activate this feature to reduce any static and ghosting that
may appear on the screen.
Move
œ √ Adjust
Return
Picture
◆ DNIe (Digital Natural Image engine
)
…
More
This feature bring you more detailed image with 3D noise
reduction, detail enhancement, contrast enhancement and
white enhancement. New image compensation Algorithm
gives brighter, clearer, much detailed image to you.
Digital NR
DNIe
Tilt
œ On
: On
: 0
√
√
PIP
TM
DNIe technology will fit every signals into your eyes.
Move
œ √ Adjust
Return
1
2
Press the MENU ( ) button.
Picture
Result:
The main menu is displayed.
…
More
Digital NR
DNIe
Tilt
: On
œ On
: 0
Press the ▲ or ▼ button to select Picture.
Result: The options available in the Picturegroup are
√
√
PIP
displayed.
3
4
Press the ENTER (
) button.
Move
œ √ Adjust
Return
Select the required option (Scan Mode, Digital NR, or DNIe) by
pressing the ▲ or ▼ button.
5
Press the œ or √ button to change the setting.
◆
◆
◆
Scan Mode : Natural, Digital, or Progressive
Digital NR : Offor On (activating)
DNIe : Off, Demo, or On (activating)
You can also set these options simply by
pressing the DNIe button.
➢
English - 24
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Blue Screen
If no signal is being received or the signal is very weak, a blue
screen automatically replaces the noisy picture background.
TV
Setup
If you wish to continue viewing the poor picture, you must set the
“Blue Screen” mode to “Off”.
Plug & Play
Language
√
: English
Time
Blue Screen
Melody
√
√
œ On
: 0n
1
2
Press the MENU ( ) button.
Result:
The main menu is displayed.
Demonstration
√
Move
œ √ Adjust
Return
Press the ▲ or ▼ button to select Setup.
Result:
The options available in the Setupgroup are
displayed.
3
4
5
Press the ENTER (
) button.
Press the ▲ or ▼ button to select Blue Screen.
To activate this feature, select On by pressing the œ or √ button.
Using the Tilt Control Feature
If you find that the picture received is slightly tilted to one side, you
can adjust the tilt setting.
TV
Picture
…
More
Digital NR
DNIe
Tilt
: On
: On
œ 0
1
2
Press the MENU ( ) button.
Result:
The main menu is displayed.
√
√
PIP
Press the ▲ or ▼ button to select Picture.
Result:
The options available in the Picturegroup are
displayed.
Move
œ √ Adjust
Return
3
4
5
Press the ENTER (
) button.
Press the ▲ or ▼ button to select Tilt.
Press the œ or √ button to reach the required setting (-7 to +7).
English - 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Freezing the Current Picture
You can freeze the picture when watching a television programme
simply by pressing the “STILL ” button.
(
)
To return to normal viewing, press this button again.
➢
Changing the Sound Standard
You can select the type of special sound effect to be used when
watching a given broadcast.
TV
Sound
Mode
Equalizer
œ
Custom
√
√
1
2
Press the MENU ( ) button.
Auto Volume
Dolby Virtual
Woofer
Turbo Sound
Pseudo Stereo
: Off
: Off
: On
: Off
: Off
Result:
The main menu is displayed.
Press the ▲ or ▼ button to select Sound.
Result:
The options available in the Soundgroup are
displayed.
Move
œ √ Adjust
Return
3
4
Press the ENTER (
) button.
Result: The Modeis selected.
Select the required sound effect by pressing the œ or √ button
repeatedly.
Result:
The following sound effects are available:
Standard Music Movie Speech(SVE)
SVE : SAMSUNG Voice Enhancement Technic
-
-
-
-
Custom
◆
You can also set these options simply by pressing the
➢
S.MODE
(
;
Sound Mode) button.
English - 26
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Sound Settings
The sound settings can be adjusted to suit your personal preferences.
TV
Sound
1
2
Press the MENU ( ) button.
Mode
Equalizer
Auto Volume
Dolby Virtual
Woofer
Turbo Sound
Pseudo Stereo
: Custom
√
Result:
The main menu is displayed.
: Off
: Off
: On
: Off
: Off
Press the ▲ or ▼ button to select Sound.
Result:
The options available in the Soundgroup are
displayed.
Move
Enter
Return
3
4
5
Press the ENTER (
Press the ▲ or ▼ button to select Equalizer.
Press the ENTER ( ) button.
) button.
TV
Equalizer
R
L
Result:
The options available in the Equalizergroup are
displayed.
100 300 1K
3K 10K
You can also display this group simply by pressing the
S.MENU (Sound Menu) button.
➢
Adjust
œ √ Move
Return
6
Select the option to be adjusted by pressing the œ or √ button.
Press the ▲ or ▼ button to reach the required setting.
If you make any changes to these settings, the sound
standard is automatically switched to Custom.
➢
English - 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Extra Sound Settings (depending on the model)
◆ Auto Volume
Each broadcasting station has its own signal conditions, and
TV
TV
TV
TV
TV
Sound
so it is not easy for you to adjust the volume every time the
channel is changed. This feature lets you automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is low.
Mode
Equalizer
Auto Volume
Dolby Virtual
Woofer
Turbo Sound
Pseudo Stereo
: Custom
√
√
œ
On
: Off
: On
: Off
: Off
◆ Woofer
Move
œ √ Adjust
Return
When the woofer speaker is mounted to the TV, you can
hear the bass sound-effect (if not mounted, the volume is
much lower). Remove the packing materials between the
woofer speaker and TV. Attach the woofer speaker ribs in
the holes on the top of the TV. Connect the woofer speaker
jacks to the TV rear panel inputs and follow the below.
Sound
Mode
Equalizer
Auto Volume
Dolby Virtual
Woofer
Turbo Sound
Pseudo Stereo
: Custom
√
√
: Off
On
œ
: On
: Off
: Off
◆ Turbo Sound
This feature suitably emphasizes both higher and lower
bands of sound (and includes other effects).
Move
œ √ Adjust
Return
You can enjoy more magnificent and dynamic sound when
watching music, movie, or other channels.
Sound
◆ Pseudo Stereo / Dolby Virtual
Mode
Equalizer
Auto Volume
Dolby Virtual
Woofer
Turbo Sound
Pseudo Stereo
: Custom
√
√
Pseudo Stereofeature converts a monaural sound signal
into two identical left and right channels.
: Off
: Off
Once the Pseudo Stereoor Dolby Virtualis set to On
or Off, these settings apply to the sound effects such as
Standard, Music, Movie, and Speech(SVE).
œ
On
: Off
: Off
Move
œ √ Adjust
Return
(
)
1
2
Press the MENU
button.
Sound
Result: The main menu is displayed.
Mode
Equalizer
Auto Volume
Dolby Virtual
Woofer
Turbo Sound
Pseudo Stereo
: Custom
√
√
Press the ▲ or ▼ button to select Sound.
Result: The options available in the Soundgroup are
: Off
: Off
: On
displayed.
œ
On
: Off
3
4
Press the ENTER (
) button.
Move
œ √ Adjust
Return
Select the required option (Auto Volume, Dolby Virtual,
Woofer, Turbo Sound, or Pseudo Stereo) by pressing the ▲ or
▼ button.
Sound
Mode
Equalizer
Auto Volume
Dolby Virtual
Woofer
Turbo Sound
Pseudo Stereo
: Custom
You can select the turbo sound feature simply by pressing
the TURBO button.
➢
√
√
: Off
: Off
: On
5
To activate each feature, select On by pressing the œ or √ button.
: Off
œ
On
When you use headphones, first turn off the woofer.
Move
œ √ Adjust
Return
➢
Manufactured under license from
Dolby Laboratories.
➢
“Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.
English - 28
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Melody
The sound settings can be adjusted to suit your personal preferences.
TV
Setup
1
2
Press the MENU ( ) button.
Plug & Play
Language
Time
√
√
Result:
The main menu is displayed.
: English
Press the ▲ or ▼ button to select Setup.
Blue Screen : On
Melody
Demonstration
œ 0n
√
√
Result:
The options available in the Setupgroup are
displayed.
Move
œ √ Adjust
Return
3
4
5
Press the ENTER (
) button.
Press the ▲ or ▼ button to select Melody.
To activate this feature, select On by pressing the œ or √ button.
English - 29
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Sound Mode (depending on the model)
The “DUAL I-II” button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either “DUAL-I ” or “STEREO”, depending on
the current transmission.
Type of broadcast
On-screen indication
Regular broadcast
(Standard audio)
MONO (Normal use)
Regular +
NICAM Mono
MONO
NICAM
↔
MONO
(Normal)
NICAM
Stereo
STEREO ↔ MONO
NICAM (Normal)
NICAM Stereo
DUAL-
I
→ DUAL-II → MONO
NICAM (Normal)
NICAM
NICAM Dual-I/II
Regular broadcast
(Standard audio)
MONO (Normal use)
A2
Stereo
Bilingual or Dual-I/II
DUAL- ↔ DUAL-II
I
STEREO ↔ MONO
(Forced mono)
Stereo
◆ If the receiving conditions deteriorate, listening will be
➢
easier if the mode is set to the MONO.
◆ If the stereo signal is weak and an automatic switching
occurs, then switch to the MONO.
◆ When receiving a mono sound in the AV mode, connect
to the “AUDIO-L” input connector on the panel (front or
side). If the mono sound comes out only from left
speaker, press the DUAL I-II button.
English - 30
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting and Displaying the Current Time
You can set the television’s clock so that the current time is displayed
by pressing the “INFO
(
)” button. You must also set the time if
you wish to use the automatic on or off timers.
TV
TV
TV
Setup
Plug & Play
Language
Time
Blue Screen : On
Melody
√
√
When pressing the “ ” button (On/Off) on the front of
the television, the clock setting will be reset.
➢
: English
: On
1
2
Press the MENU ( ) button.
Demonstration
√
Result:
The main menu is displayed.
Move
Enter
Return
Press the ▲ or ▼ button to select Setup.
Time
Result:
The options available in the Setupgroup are
displayed.
Clock
--: -- am
: Off
--: -- am Off
--: -- am Off
Sleep Timer
On Timer
Off Timer
3
4
5
Press the ENTER (
) button.
On Timer Volume
:
0
Press the ▲ or ▼ button to select Time.
On Timer Channel : P 1
Press the ENTER (
) button.
Move
œ √ Adjust
Return
Result: The Clockis selected.
6
Press the œ or √ button to move to the hour or minute. Set the
hour or minute by pressing the ▲ or ▼ button.
Time
11 : 00 am
Clock
Sleep Timer
On Timer
Off Timer
On Timer Volume
On Timer Channel : P 1
: Off
--: -- am Off
--: -- am Off
7
8
When you have finished, press the EXIT (
) button to exit.
Press the INFO ( ) button to display the channel information and
the current time.
:
0
Adjust
œ √ Move
Return
English - 31
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Sleep Timer
You can set your TV to automatically turn off after a preset
interval.
TV
Setup
Plug & Play
Language
Time
Blue Screen : On
Melody
√
√
1
2
Press the MENU ( ) button.
Result: The main menu is displayed.
: English
Press the ▲ or ▼ button to select Setup.
Result: The options available in the Setupgroup are
: On
Demonstration
√
Move
Enter
Return
displayed.
Press the ENTER (
Press the ▲ or ▼ button to select Time.
3
4
5
) button.
TV
Time
Clock
11 : 00 am
Sleep Timer
On Timer
Off Timer
œ 30
--: -- am Off
--: -- am Off
√
Press the ENTER (
) button.
Result: The Clockis selected.
On Timer Volume
:
0
On Timer Channel : P 1
6
7
Press the ▲ or ▼ button to select Sleep Timer.
Move
œ √ Adjust
Return
Select the preset time interval (Off, 30, 60, 90, 120, 150, 180) for
staying on by pressing the œ or √ button.
You can select a time period of between 30 and 180 minutes
after the television automatically switches to Standby mode
➢
by pressing the SLEEP ( ) button.
English - 32
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching the Television On and Off Automatically
You can set the On/Off timers so that the television will:
◆ Switch on automatically and tune to the channel of your
TV
Setup
choice at the time you select
Plug & Play
Language
Time
√
√
◆ Switch off automatically at the time you select
: English
The first step is to set the television’s clock (refer to
“Setting and Displaying the Current Time” on the page
31). If you have not yet set the clock, the message Set
the clock firstis displayed.
➢
Blue Screen : On
Melody
: On
Demonstration
√
Move
Enter
Return
1
2
Press the MENU ( ) button.
TV
Time
11:00 am
: 30
06:00 am On
--:-- am Off
Result:
The main menu is displayed.
Clock
Sleep Timer
On Timer
Off Timer
Press the ▲ or ▼ button to select Setup.
Result: The options available in the Setupgroup are
On Timer Volume
:
0
displayed.
Press the ENTER (
Press the ▲ or ▼ button to select Time.
On Timer Channel : P 1
3
4
5
) button.
Adjust
œ √ Move
Return
TV
Time
11:00 am
: 30
06:00 am On
11:00 pm On
Press the ENTER (
) button.
Clock
Sleep Timer
On Timer
Result: The Clockis selected.
6
Press the ▲ or ▼ button to select On Timer. Set the time at which
you wish the television to be switched on automatically.
Off Timer
On Timer Volume
:
0
On Timer Channel : P 1
◆
Press the œ or √ button to move to the hour or minute.
Set these by pressing the ▲ or ▼ button.
Adjust
œ √ Move
Return
◆
Press the œ or √ button to move Off, then press the ▲ or ▼
button to select On.
7
Press the ▲ or ▼ button to select Off Timer. In the same above,
set the time at which you wish the television to be switched off
automatically.
Absent Power Off
➢
When you set the timer “On”, your television will
eventually be turned off, if you do not operate any controls
during the 3 hours after the TV is turned on by timer.
This function is available in only the timer “On” mode and
will prevent a leakage accident or overheating, caused by
your TV left on for a long time due to the timer “On” (when
you are away on holiday, for example).
English - 33
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Preferred Volume Level/Channel
The preferred volume and channel can be set for when the timer
automatically turns on the TV.
TV
TV
TV
Setup
Plug & Play
Language
Time
Blue Screen : On
Melody
√
√
1
2
Press the MENU ( ) button.
: English
Result:
The main menu is displayed.
Press the ▲ or ▼ button to select Setup.
: On
Demonstration
√
Result:
The options available in the Setupgroup are
displayed.
Move
Enter
Return
3
4
5
Press the ENTER (
) button.
Time
11:00 am
: 30
06:00 am On
11:00 pm On
Press the ▲ or ▼ button to select Time
Clock
Sleep Timer
On Timer
Off Timer
Press the ENTER (
) button.
Result: The Clockis selected.
On Timer Volume
On Timer Channel : P 1
œ 10
√
6
7
8
9
Press the ▲ or ▼ button to select On Timer Volume.
Press the œ or √ button to adjust volume level.
Press the ▲ or ▼ button to select On Timer Channel.
Press the œ or √ button to select the channel.
Move
œ √ Adjust
Return
Time
11:00 am
Clock
Sleep Timer
On Timer
Off Timer
: 30
06:00 am On
11:00 pm On
On Timer Volume
: 10
On Timer Channel œ P 1 √
Move
œ √ Adjust
Return
English - 34
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing an External Signal Source/Edit Name (depending on the model)
Use the remote control to switch between viewing signal from
connected equipment, such as VCR, DVD, Set-Top-boxes and the
TV source (broadcast or cable)
TV
Input
: TV
Source List
Edit Name
√
√
WISELINK
(
)
1
2
Press the MENU
button.
Result: The main menu is displayed.
Press the ENTER (
) button to select Input.
Move
Enter
Return
Result:
The options available in the Inputgroup are
displayed.
TV
TV
TV
TV
Source List
TV
AV1
AV2
3
4
Press the ENTER (
) button again to select Source List.
: ------
: ------
AV3/S-Video : ------
Component1 : ------
More
Result:
The options available in the Source Listgroup are
displayed.
†
Press the ▲ or ▼ button to select signal source, then press the
ENTER ( ) button.
Move
Enter
Return
When you connect equipment to the TV, you can choose
between the following sets of jacks : AV-1(or EXT 1(RGB)),
AV-2(or EXT 2(AV)), Component1, Component2, or PC
(depending on the model) on the TV’s rear panel, and
AV3/S-Video on the TV’s side panel.
➢
Input
: TV
Source List
Edit Name
WISELINK
√
You can also set these options simply by pressing the
SOURCE (
➢
) button. If you change the external source
while viewing, pictures might take a short period of time to be
switched.
Move
Enter
Return
Edit Name
Edit Name
------
AV1
AV2
AV3
S-Video
Component1
œ
√
(
)
1
Press the MENU
button.
: ------
: ------
: ------
: ------
Result: The main menu is displayed.
2
Press the ENTER (
) button to select Input.
†
More
Result:
The options available in the Inputgroup are
displayed.
Move
œ √ Adjust
Return
3
4
Press the ▲ or ▼ button to select Edit Name. Press the ENTER
) button.
Edit Name
DVD
(
AV1
AV2
AV3
S-Video
Component1
œ
√
Result:
The options available in the Edit Namegroup are
displayed.
: ------
: ------
: ------
: ------
Press the ▲ or ▼ button to select external device :
AV1 AV2 AV3 S-Video Component1 Component2
PC
†
More
-
-
-
-
-
-
Move
œ √ Adjust
Return
◆
PC : When the PC is connected, it is selected.
(depending on the model)
5
6
7
Press the ENTER (
) button.
Select the name by pressing the ¦¤or button.
Set other signal sources (AV1, AV2, AV3, S-Video, Component1,
Component2, PC (depending on the model)) using the same
method as listed above.
English - 35
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Picture In Picture (PIP) (depending on the model)
You can display a sub picture within the main picture of TV program
or external A/V devices such as VCR or DVD. In this way you can
watch TV program or monitor the video input from any connected
devices while watching TV or other video input.
TV
TV
TV
TV
Picture
…
More
Digital NR
DNIe
Tilt
: On
: On
: 0
(
)
1
2
Press the MENU
button.
PIP
√
Result: The main menu is displayed.
Press the ▲ or ▼ button to select Picture.
Result: The options available in the Picturegroup are
Move
Enter
Return
PIP
displayed.
PIP
œ
Off
√
3
4
Press the ENTER (
) button.
Press the ▲ or ▼ button to select PIP. Press the ENTER (
button.
)
5
Press the ¦¤or button to On.
Move
œ √ Adjust
Return
PIP
Result:
The options available in the PIPgroup are displayed.
You can also activate the PIP simply by pressing the PIP
button. To deactivate, press it again.
➢
PIP
: On
Source
Swap
Size
Position
Programme
œ
TV
√
√
6
7
Press the ▲ or ▼ button to select Source.
: Large
:
: P 1
Press the ¦¤or button to select a source of sub picture.
Result:
The sources are displayed in the following order:
TV AV1 AV2 AV3/S-Video
-
-
-
Move
œ √ Adjust
Return
In some PIP TV models, the PIP function will not operate if
the same source to the main picture is selected for the sub-
picture. When a TV channel is viewed on the main picture,
PIP is not available for TV channels. If a TV source is
selected, the message "Not available" will appear on the
screen. The PIP picture can be viewed only when a source
different from the main picture's is selected in the PIP
window.
➢
➢
PIP
PIP
Source
Swap
Size
Position
Programme
: On
: TV
√
: Large
:
: P 1
You can also set these options simply by pressing the
SOURCE button.
Move
Enter
Return
8
9
Press the ▲ or ▼ button to select Swap.
Press the ENTER ( ) button.
Result:
The main picture and the sub picture are
interchanged.
You can also interchange the main picture and the sub
➢
(
)
picture simply by pressing the SWAP
button.
English - 36
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Picture In Picture (PIP) (depending on the model) (continued)
10 Press the ▲ or ▼ button to select Size.
TV
PIP
11 Select a size of sub picture by pressing the ¦¤or button.
PIP
Source
Swap
Size
Position
Programme
: On
: TV
Result:
The sizes are displayed in the following order:
Large Small Double Window 16 PIP
√
√
-
-
-
œ Large
:
◆
16 PIP : You can view up to 16 memorized channels
➢
: P 1
on the sub picture spontaneously.
Move
œ √ Adjust
Return
◆
On the condition of 16 PIP, it is impossible to execute
Swapand Position.
You can select these options simply by pressing the SIZE
button.
➢
12 Press the ▲ or ▼ button to select Position.
13 Select a position of sub picture by pressing the ¦¤or button.
Result:
The positions available are displayed.
- - -
TV
PIP
PIP
Source
Swap
: On
: TV
You can select these options simply by pressing the
(Position) button.
➢
√
Size
Position
Programme
: Large
œ
14 Press the † or … button to select Programme. You can select the
channel that you want to view through sub picture by pressing the
œ or √ button.
√
: P 1
Move
œ √ Adjust
Return
PIP
◆
◆
When the Sourceis set to TV, you can select the
➢
channel of sub picture.
TV
You can select the channel of the sub picture simply by
pressing the † or … button.
PIP
Source
: On
: TV
Swap
√
Easy functions of remote control
Size
Position
Programme
: Large
:
œ P 1
√
Buttons
PIP
Feature
Move
œ √ Adjust
Return
Used to activate or deactivate the PIP function directly.
Used to interchange the main picture and the sub picture.
SWAP
(
)
When the main picture is in the Video mode and the
➢
sub picture is in the TV mode, you might not hear the
(
)
sound of main picture when pressing the SWAP
button after changing the sub picture channel. At this
time, reselect the channel of main picture.
SOURCE
SIZE
Used to assign a source of sub picture (TV, AV1, AV2, or
AV3/S-Video).
Used to select a size of sub picture (Large, Small,
Double Window, or 16 PIP).
Used to move the sub picture counterclockwise.
Used to select the channel of sub picture.
(Position)
P
/
English - 37
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Wise Link (depending on the model)
Wise Link is used to play JPEG files (*.jpg) and MP3 files (*.MP3) stored in the memory card on the TV.
◆ What is a Memory Card?
A memory card is an auxiliary storage device used in AV equipment to exchange data between
devices. It is mainly used in digital cameras, digital camcorders, MP3 players, notebooks, and
PDAs.
◆ Memory Cards Available in WISE LINK
You can use CF (Compact Flash), SMC (Smart Media Card), SD (Secure Digital), MMC (Multi
Media Card), and MS (Memory Stick) in the four WISE LINK slots. Confirm the card type and
proper insertion direction before you insert a memory card. The correct card type is listed for
each slot.
Compact Flash I
Multimedia Card (MMC)
Memory Stick
Secure Digital Memory Card
(SD Memory Card)
Smart Media Card
Memory Stick Pro and Memory Stick Duo are not supported.
There are different slot configurations for Compact Flash Type I and II. This product supports
CF Type I.
➢
➢
◆ How to Insert a Memory Card
Gently push the memory card into the slot. If the card is not inserted completely, it will not
work. Insert the card in the direction indicated on the memory card.
Note: Do not apply excessive force while inserting the card.
◆ How to Eject a Memory Card
Holding the tip of the card, gently pull it out.
◆ Cautions on Memory Card Use
- Data can be damaged when a memory card is used in the presence of static electricity and/or
electronic noise.
- Data can be damaged when a memory card is repeatedly inserted and ejected.
- Play speed may differ depending on the card type.
- Do not attach anything but a label in the proper place.
- Be careful to attach the label only within the proper space.
- Be careful not to make contact between the memory card terminal and metal objects.
- Do not strike, bend or drop the memory card.
- Do not dismantle or tinker with the memory card.
- Be careful to keep the memory card dry.
- Do not insert any objects other than Memory Card into the Memory Card Slot.
English - 38
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Wise Link (depending on the model) (continued)
◆ Cautions on using WISE LINK Mode
- Do not insert foreign objects into the slot.
- Insert the memory card in the proper direction
- Do not remove the memory card when it is in use.
- The manufacturer’s responsibility does not include damaged data. (Be careful not to corrupt
data and be sure to back up files.)
- Use the slot cover so that dust and foreign objects cannot enter the slot when WISE LINK is
not in use.
◆ Initialization of WISE LINK Mode
Errors can occur in WISE LINK mode because of the various memory card types, the various
manufacturers and the type of data stored. When an error occurs, please initialize WISE LINK
as follows:
- Press the W.LINK button on the transmitter for about 2 seconds to initialize WISE LINK.
During Initialization, there will be no display for about 3 seconds.
- After pressing the W.LINK button to switch into TV mode, press the W.LINK button again to
return to Wise LINK mode. Initialization is now finished.
◆ Files supported by WISE LINK
File Type
JPEG Image (*.jpg)
MP3 Files (*.mp3)
No limit to file sizes.
MP3 files may not play depending on
the data transfer rate.
• Data Transfer Rate: Files with less
than 192 Kbps will run.
JPEG images are classified into
standard JPEG and progressive JPEG.
• Standard JPEG: Files with less than 5
million pixels.
• Progressive JPEG: Files with less than
2 million pixels.
File Size
Compatibility
Still Image Files with (*.jpg) Extension
Music Files with the (*.mp3) Extension
• CF: 512MBytes
• MS: 128MBytes
• MMC&SD: 512MBytes
• SMC: 128Mbytes
Supported
Memory Card
Sizes
An error can take place if a higher capacity memory card is used.
When you use a memory card reader to copy data on your home computer, follow
the normal procedures. If you do not follow the proper procedures and erroneously
copy data, the data will not run in WISE LINK.
Data Copying
Formatting
the Memory
Card
If you format the memory card on your computer, an error can occur in other digital
devices with the formatted card. You should only format the memory card in the
digital equipment using the memory card.
Unsupported
and
Erroneous
Files
The file manager may show other files in addition to JPEG/MP3 files, but they
cannot be run. Do not rename unsupported files with file extensions that are
supported. It may cause errors.
English - 39
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching to WISE LINK Mode (depending on the model)
(
)
1
2
Press the MENU
button.
Result: The main menu is displayed.
Press the ENTER (
) button to select Input.
Result:
The options available in the Inputgroup are
displayed.
3
Press the ▲ or ▼ button again to select WISELINK. Press the
ENTER (
) button.
Result:
The WISELINKmenu is displayed.
TV
Input
: TV
Source List
Edit Name
WISELINK
√
√
You can also select these options simply by pressing the
W.LINK button. WISELINK mode is activated. If you press
the button again, it switches back to TV mode.
➢
Move
Enter
Return
The product unit accompanying this user manual is
licensed under certain intellectual property rights of
certain third parties. This license is limited to private
non-commercial use by end-user consumers for
licensed contents. No rights are granted for commercial
use. The license does not cover any product unit other
than this product unit and the license does not extend to
any unlicensed product unit or process conforming to
ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in
combination with this product unit. The license only
covers the use of this product unit to encode and/or
decode audio files conforming to the ISO/IEC 11172-3
or ISO/IEC 13818-3. No rights are granted under this
license for product features or functions that do not
conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.
English - 40
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting Image (JPEG) Files/Music (MP3) Files (depending on the model)
1
Press the W.LINK button.
2
3
4
Press the ▲ or ▼ button to select which memory card to run, then
press the ENTER ( ) button.
Press the œ or √ button to select the file type to run, then press
the ENTER ( ) button.
Press the ▲ or ▼ button to select the file to run, then press the
ENTER ( ) button.
◆ While making a selection, information about the
➢
selected file is displayed on the right side of the
screen.
◆ When no card is inserted, “Please Insert Cards.”
will be displayed. When a new card is inserted or the
inserted card is loose, the memory card selecting
screen will automatically open.
◆ When any card other than the memory card currently
in use becomes loose, ( ) will be displayed at the
top of the screen.
Move
Move
Move
Enter
Exit
◆ A maximum of one thousand files can be displayed.
◆ JPEG/MP3 file names are displayed in Korean and
English only.
◆ Images edited by JPEG editors (for example:
Photoshop or Paintshop) may not appear normal.
JPEG : 0007 Files
Enter
Return
Setup
Return
Enter
English - 41
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture (JPEG) Playback (depending on the model)
JPEG file format is supported.
➢
8
1
7
6
Setup
Return
2
Move
Enter
3
4
5
1) Press the (œ √▼▲) button to move
6) Press the INFO( ) button to move
to the WISE LINK Setup Menu.
(Refer to page 46.)
to the desired file and select it. Press
the ( ) button and a full page
image will be displayed.
7) The title, resolution, creation date,
and number (current file number /
total file number) for the selected
image file will be displayed.
2) Press the (œœ) button to move to
the previous page.
3) The current page number out of the
total pages is displayed.
8) The selected memory card type is
displayed.
4) Press the (√√) button to move to
the next page.
Press the (√■ ■) button to start the
slide show beginning with the
selected image.
5) Press the (
) button to move to
the previous menu.
◆ When a JPEG file is displayed full page, the right / left and/or upper / lower parts of the
image may appear black or the image may not be located in the center in the following
situations:
➢
1) When the picture is smaller than 640 x 480
2) When the width : length proportion of the picture is not 4:3.
3) When those same parts of the original picture are black
◆ When a JPEG file is displayed full page or enlarged, the four edges may not be displayed.
This is because the picture tube display of the TV does not expose the four edges of any
image as to reduce the viewer’s inconvenience during a screen fluctuation caused by
power supply or signal changes.
◆ The small pictures in the list of JPEG files may appear slightly different from the full-page
pictures.
◆ If you press the (œ √▼▲) button before all the pictures are displayed, the icon (
)
appears.
◆ When viewing still images or pausing a slide show, a screen saver will become active after
a set period of time.
English - 42
Download from Www.Somanuals.com. All Manuals Search And Download.
Rotating the Picture (JPEG) (depending on the model)
1
2
Press the ENTER (
)
button while viewing the full page
image.
Result:
The HELP menu is displayed in the lower part of the
screen.
Press the œ or √ button to select Rotatethen press the ENTER
) button.
(
➜
➜
Rotate
Zoom
Exit
Rotate
Zoom
Exit
Rotate
Zoom
Exit
90 degrees
180 degrees
270 degrees
You can also select these options simply by pressing the
ROTATE button. Press the ROTATE button to rotate
images 90, 180, 270, and 360 degrees clockwise.
➢
◆ In order to display the full image on the screen, the picture
size will automatically change depending on the rotational
angles (90 and 270 degrees)
➢
◆ When rotating the picture, the rotated image will be displayed
in the JPEG file list.
◆ An enlarged image cannot be rotated.
Picture Zoom (JPEG) (depending on the model)
1
2
Press the ENTER (
)
button while viewing the full page
image.
Result:
The HELP menu is displayed in the lower part of the
screen.
Press the œ or √ button to select Zoomthen press the ENTER
) button.
(
➜
➜
Rotate
Zoom
Exit
Rotate
Zoom
Exit
Rotate
Zoom
Exit
(Enlarge 1)
(Enlarge 2)
(Normal)
You can also select these options simply by pressing the
ZOOM button. When you press the ZOOM button
➢
repeatedly Enlarge1
(
), Enlarge2 (
), and Normal
(
) will be selected in sequence.
◆
◆
You can use the (œ √▼▲) button to move the enlarged
➢
picture.
When you move the enlarged picture, the edges of the original
picture may not be displayed.
English - 43
Download from Www.Somanuals.com. All Manuals Search And Download.
Music File (MP3) Playback (depending on the model)
MP3 file format is supported.
➢
8
1
7
6
2
Setup
Return
Move
√II Play/Pause
3
4
5
1) Press the ▲ or ▼ button to move to
a desired file and it will
automatically play.
7) The elapsed time, total playback
time, creation date, and number
(current file number / total file
number) for the selected file will be
displayed.
2) Press the (œœ) button to move to
the previous page.
3) The active page is displayed.
4) Press the (√√) button to move to
8) The selected memory card type is
displayed.
the next page.
5) Press the (
) button to move to
Press the (√■ ■) button to play or
pause the file.
the previous menu.
6) Press the INFO ( ) button to move
to the WISE LINK setup menu.
(Refer to page 46)
◆ Play time and total running time of VBR MP3 files will not be displayed.
➢
◆ The screen saver will become active after a set period of time whether the music is playing
or paused.
English - 44
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback All JPEG/MP3 Files (depending on the model)
JPEG/MP3 files are displayed.
➢
8
1
2
7
6
Setup
Return
Move
√II Play/Pause
3
4
5
1) Please see pages 41 and 44 on how to
playback JPEG & MP3 files.
6) Press the INFO ( ) button to move
to the WISE LINK Setup Menu. (See
page 46.)
2) Press the (œœ) button to move to the
previous page.
3) The active page is displayed.
7) The information for the current file is
displayed.
4) Press the (√√) button to move to the
next page.
8) The selected memory card type is
displayed.
5) Press the (
) button to move to the
previous menu.
◆ The file manager may show other files in addition to JPEG/MP3 files, but they cannot
➢
be run.
◆ You cannot select “Music Repeat” in the file list. When a piece of music is finished,
it stops.
English - 45
Download from Www.Somanuals.com. All Manuals Search And Download.
WISE LINK Menu Setup (depending on the model)
You can set various functions in WISE LINK mode.
1
2
3
4
Press the INFO ( ) button while in WISE LINK setup mode.
WISE LINK setup mode is displayed.
Press the ▲ or ▼ button to select the desired sub-menu, then
press the ENTER ( ) button.
Press the ▲ or ▼ button to select the desired item and then press
the ENTER ( ) button.
Press the EXIT (
) button to exit the menu.
Setup
Turning off the TV set or switching to another mode during
setup will cancel your settings. The Wise Link settings will
revert to the previously memorized settings.
➢
Music Slide Show
Slide Show Speed
Slide Show Effect
Music Repeat
:
:
:
:
Normal
√
√
√
√
Full Screen
Off
Screen Saver
5min
Move
Enter
Exit
Setup
Music Slide Show
Slide Show Speed
Slide Show Effect
Music Repeat
Fast
:
Normal
√
√
√
:
Slow
: Off
Screen Saver
: 5min
Move
Enter
Exit
English - 46
Download from Www.Somanuals.com. All Manuals Search And Download.
WISE LINK Menu Setup (depending on the model) (continued)
◆
◆
◆
◆
◆
Music plays while the pictures are displayed in
sequence.
Setup
Music Slide Show
Music Slide Show
Slide Show Speed
Slide Show Effect
Music Repeat
“
Music Slide Show” does not work in either Card
:
:
:
:
Normal
√
√
√
√
Selection mode or File Type Selection mode.
If there are no JPEG files or MP3 files in the folder,
“Music Slide Show” will not run.
Full Screen
Off
Screen Saver
5min
During the “Music Slide Show”, only the Play /
Move
Enter
Exit
Pause / Exit / Stop buttons are available.
Only the files in the same folder can be played when
you run a file from the JPEG/MP3 file folder.
◆
You can set the Time per Picture when the slide
show starts.
Setup
Slide Show Speed
Slide Show Effects
Music Repeat
Music Slide Show
Slide Show Speed
Slide Show Effect
Music Repeat
Fast
:
√
√
√
Normal
-
-
-
Fast: Pictures change every three seconds.
Normal: Pictures change every five seconds.
Slow: Pictures change every ten seconds.
Slow
:
:
Off
Screen Saver
5min
Move
Enter
Exit
◆
◆
◆
During the slide show, you can select the “Slide
Show Effect” to display using the remote control.
Setup
Music Slide Show
Slide Show Speed
Slide Show Effect
Music Repeat
:
:
:
Normal
√
√
-
-
Dynamic: Pictures appear from various directions.
Full Screen: Stops the “Slide Show Effect”.
Dynamic
l
Full Screen
Screen Saver
5min
Exit
Move
Enter
You can set the music to repeat.
Setup
Music Slide Show
Slide Show Speed
Slide Show Effect
Music Repeat
-
-
Off: MP3 files stop one by one after playing.
All: All the files within the folder play in sequence
and repeat.
:
:
Normal
√
Off
All
One
-
One: The file currently playing repeats.
Screen Saver
Move
Enter
Exit
A screen saver is provided to prologue the life of the
Screen.
Setup
Screen Saver
Music Slide Show
Slide Show Speed
Slide Show Effect
Music Repeat
:
:
:
Normal
√
√
√
-
-
Off: Stops the screen saver.
Full Screen
5min: The screen saver automatically turns
on if no button is pressed within five minutes.
10min: The screen saver automatically turns
on if no button is pressed within ten minutes.
Off
5min
Screen Saver
10min
-
Move
Enter
Exit
◆ When “Music Repeat” is set to “Off”, the “Music Slide Show” repeats all the music.
➢
◆ The
(
√
■
■)
button will toggle between the following (during “Music Slide Show”):
Picture Pause → Picture/Music Pause → Release Pause (Play)
◆ When “Music Slide Show” is on, Picture Pause and Picture/Music Pause will be
released after five minutes in order to protect the CRT.
◆ VBR (Variable Bit Rate) MP3 files will not be played in order to ensure the stable
operation of the slide show.
English - 47
Download from Www.Somanuals.com. All Manuals Search And Download.
Teletext Feature
Most television channels provide written information services via
teletext. Information provided includes:
◆
◆
◆
◆
Television programme times
News bulletins and weather forecasts
Sports results
Travel information
This information is divided into numbered pages (see diagram).
Part
Contents
A
B
C
D
E
F
Selected page number.
Broadcasting channel identity.
Current page number or search indications.
Date and time.
Text.
Status information.
FASTEXT information.
It can be diffrent from depending on TTX source.
Teletext information is often divided between several
pages displayed in sequence, which can be accessed by:
➢
➢
◆ Entering the page number
◆ Selecting a title in a list
◆ Selecting a colored heading (FASTEXT system)
Displaying the Teletext Information
You can display Teletext information at any time on your television.
For Teletext information to be displayed correctly,
channel reception must be stable; otherwise:
☛
◆ Information may be missing
◆ Some pages may not be displayed
1
2
Select the channel providing the Teletext service using the
button.
or
Press the TTX/MIX (
Result: The contents page is displayed. It can be redisplayed
at any time by pressing the (index) button.
) button to activate the teletext mode.
3
4
If you wish to display the actual broadcast at the same time as
the teletext page, press the TTX/MIX ( ) button again.
Press the TV ( ) button to exit from the teletext display.
English - 48
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a Page by Number
You can enter the page number directly by pressing the numeric
buttons on the remote control.
1
Enter the three-digit page number given in the content by pressing
the corresponding numeric buttons.
Result:
The current page counter is incremented and the
page is then displayed.
2
If the selected page is linked with several secondary pages, the
secondary pages are displayed in sequence. To freeze the display
on a given page, press the
resume.
(hold). Press the
(hold) again to
Using the various display options:
To display...
Press the...
◆
Both teletext information and
the normal broadcast
TTX/MIX (
twice
)
◆
Hidden text
(reveal)
(answers to quiz games, for example)
◆
◆
The normal screen
(reveal) again
A secondary page,
(sub-page)
by entering its 4-digit number
◆
◆
The next page
(page up)
The previous page
(page down)
◆
Double-size letters in the:
• Upper half of the screen
• Lower half of the screen
(size)
• Once
• Twice
◆
Normal screen
• Three times
English - 49
Download from Www.Somanuals.com. All Manuals Search And Download.
Using FLOF to Select a Page
The various topics included in the teletext pages are color-coded,
and can be selected by pressing the colored buttons on the remote
control.
1
2
Display the teletext contents page by pressing the TTX/MIX
) button.
(
Press the colored button corresponding to the topic that you wish
to select;the available topics are given on the status line.
Result:
The page is displayed with other colored information
that can be selected in the same way.
3
4
To display the previous or next page, press the corresponding
colored button.
To display the subpage, see the following steps.
◆
Press the
Result:
(sub-page) button.
The available subpages appear.
◆
Select the required sub-page. Sub-pages can be scrolled by
using the TURBO (Red) or S.MENU (Green) button.
Storing Teletext Pages
You can store up to four teletext pages to display them later at
leisure.
1
Select the LIST mode using the
button.
Result:
The
Four 3-digit numbers are displayed in different colors.
button is used to switch between the LIST and
FLOF (or FASTEXT) modes.
➢
2
Press the colored button corresponding to the page that will be
replaced.
3
4
Enter the new page number using the numeric buttons.
Repeat steps
2
and
3
for each page to be stored, using a
different colored button each time.
5
Press the
(store) button until the corresponding blocks blink.
English - 50
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to the External Input/Outputs
➢
“EXT 1 (RGB)” is used for the equipment with an RGB
VCR
DVD
output, such as video game devices or video disc players.
②
Rear of the TV
(depending on the model)
③
Decoder /
Video game device
Video disc player
Satellite receiver
①
or
➃
◆
“MONITOR OUT (or EXT 1 (RGB))” is used for the audio/video output of current television
programme.
①
This end can be fitted with:
◆
A SCART connector
Three RCA connectors (Video + Audio-L and R)
◆
②
If you have a second VCR and wish to copy cassettes tape, connect the source VCR to
AV 2 INPUT (VCR) (or EXT 2 (AV) and the target VCR to “MONITOR OUT (or EXT 1
(RGB) so that you can redirect the signal from “AV 2 INPUT (VCR) (or EXT 2 (AV) to
“MONITOR OUT (or EXT 1 (RGB)
“
)”
)”
)”
)
”.
③
➃
If you have a decoder, connect the decoder to the VCR and the VCR to the television.
When you wish to record a programme, connect the receiver to “AV 2 INPUT (VCR) (or EXT 2
(AV) and the VCR to “MONITOR OUT (or EXT 1 (RGB) so that you can redirect the signal
from “AV 2 INPUT (VCR) (or EXT 2 (AV) to “MONITOR OUT (or EXT 1 (RGB)
)”
)”
)”
)”.
English - 51
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to the DVD Player (depending on the model)
Rear of the TV
DVD
◆
◆
Connect the RCA Cable to “L” and “R” on the rear of your television and the other end to “Audio Out”
connector of the DVD player. Connect the RCA Cable to “Y”, “PB”, and “PR” on the rear of your television
and the other end to the “Component Video Out (Y, PB, PR)” connectors of the DVD player.
Only black signal is output from a monitor in Component1 or Component2 mode.
English - 52
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to the Audio Output
➢
The “AUDIO OUT” (RCA) connectors are used for equipment, such as an audio system (to take full
advantage of the Surround sound effect).
Rear of the TV
(depending on the model)
Audio system
Connecting to the Active Sub Woofer Speaker(depending on the model)
The SUB-WOOFER SPEAKER OUT connector is used for active sub woofer speaker with a woofer in.
Rear of the TV
(depending on the model)
Active Sub Woofer
Speaker
English - 53
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to the RCA Input
➢
The RCA (VIDEO and AUDIO-L+R) connectors are used for equipment,
such as camcorders, video disc players, and some video game devices.
Camcorder
Side of the TV
Video game device
Video disc player
Connecting to the S-Video Input
➢
The S-VIDEO INPUT and RCA (AUDIO-L+R) connectors are used for equipment with an S-Video
output, such as a camcorder or VCR.
Side of the TV
①
Camcorder
VCR
and
①
To play pictures and sound, both the S-VIDEO and RCA connectors must be used.
Whenever you connect an audio or video system to your
television, ensure that all elements are switched off.
Refer to the documentation supplied with your equipment
for detailed connection instructions and associated safety
precautions.
☛
English - 54
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to the PC Input (depending on the model)
➢
The PC VIDEO INPUT/RCA(AUDIO-L+R) connectors are used for interfacing with your PC.
Side of the TV
Personal Computer
How to Set up Your PC Software (Windows only)
➢
The Windows display-settings for a typical computer are shown below. But the actual screens on your PC
will probably be different, depending upon your particular version of Windows and your particular video
card. But even if your actual screens look different, the same, basic set-up information will apply in almost
all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
First, click on Settings on the Windows start menu.
While Settings is highlighted, move the cursor so that
Control Panel is highlighted.
When the control panel screen appears, click on
Display and a display dialog-box will appear.
Navigate to the Settings tab on the display dialog-box.
The correct setting of size (resolution) is 640 x 480 pixels.
If a vertical-frequency option exists on your display settings
dialog box, the correct value is 60 or 60 Hz. Otherwise, just
click OK and exit the dialog box.
Only black signal is output
➢
from a monitor in PC mode.
English - 55
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing Pictures From External Sources (depending on the model)
Once you have connected up your various audio and video
systems, you can view different sources by selecting the
appropriate input.
1
2
Check that all the necessary connections have been made.
(
)
Switch your television on, then press the SOURCE
button
repeatedly.
Result:
The input sources are displayed in the following
order:
TV
AV1
AV2
AV3
S-Video
(PC)
Component2
Component1
◆
PC : When the PC is connected, it is selected.
(depending on the model)
◆
Depending on the source selected, the pictures may
appear automatically.
➢
To watch television programmes again, press the TV (
button and select the number of the channel required.
)
➢
Automatic Degaussing to Remove Color Patches
A degaussing coil is mounted around the picture tube, so you do not normally need to degauss the
television manually.
If you move the television to a different position and color patches appear on the screen, you must:
◆ Switch the television off by pressing the “ ” (On/Off) button on the front panel
◆ Unplug the television from the wall socket
◆ Leave the television power-off for about 30 minutes so that the automatic degauss function
can be activated, then press the “POWER( )” button on the remote control.
☛
If your television will be left unattended, press the “ ” (On/Off) button to turn your
television off.
English - 56
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting: Before Contacting Service Personnel
Before contacting Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of the
television and contact your local dealer.
No sound or picture
◆
◆
Check that the mains lead has been connected to a wall socket.
Check that you have pressed the “ ” button (On/Off) and the
POWER ( ) button.
◆
◆
Check the picture contrast and brightness settings.
Check the volume.
Normal picture but no sound
◆
◆
Check the volume.
Check whether the MUTE ( ) button on the remote control has
been pressed.
No picture or black and white picture
Sound and picture interference
◆
◆
Adjust the color settings.
Check that the broadcast system selected is correct.
◆
◆
◆
Try to identify the electrical appliance that is affecting the television,
then move it further away.
Plug your television into a different mains socket.
Blurred or snowy picture,
distorted sound
Check the direction, location, and connections of your aerial.
This interference often occurs due to the use of an indoor aerial.
Remote control malfunctions
◆
◆
◆
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check the battery terminals.
Image or Music Files do not play back.
The image appears in mosaic at first.
◆
◆
Please check the original files.
There may be errors in the original files.
◆
◆
It is typical for a Progressive JPEG.
It will automatically become normal after a short period of time.
Each picture or slide has a different
running time.
◆
The processing time may be different depending on the memory
card type or the picture size.
The memory card is not recognized.
◆
◆
◆
Check if it is supported in WISE LINK mode.
Check if the card is inserted all the way.
The reading time may differ depending on the card capacity and
type. Please give it a moment.
◆
◆
◆
Check if the memory card is normal. A memory card which has
been formatted on a computer may not work in AV devices.
The volume changes while music is
played.
Check the original file. The manufacturers may randomly set the
volume when they create MP3 files.
There is a blank screen when switching
to WISE LINK.
Check if the inserted memory card is normal.
English - 57
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
English - 58
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
English - 59
Download from Www.Somanuals.com. All Manuals Search And Download.
-
AFTER SALES SERVICE
-
Do not hesitate to contact your retailer or service agent
if a change in the performance of your product
indicates that a faulty condition may be present.
ELECTRONICS
AA68-03304A-01
Download from Www.Somanuals.com. All Manuals Search And Download.
|