Samsung Bread Maker CS21A11 User Guide

Connecting to the RCA Input  
Connection Panel(depending on the model)  
COLOR TELEVISION  
CS21A11/CS21M7/CS21M20/CS21S8/  
CS21T10/CS21T20/  
CS25A6/CS25A11/CS25K10/CS25M6/  
CS25M20/  
The RCA¨ and RCAˆ connectors are used for equipment,  
such as a VCR, DVD, decoder, satellite receiver, video game  
device, or video disc player. (When using the mono  
equipment, connect to the AUDIO-L input connector.)  
The RCAconnectors are used for equipment such as a  
DVD with component output (480i only).  
The actual configuration of your TV may be different,  
depending on your model.  
Rear Panel  
CS29A7/CS29A11/CS29K3/CS29K5/  
CS29K10/CS29M6/CS29M16/CS29M20  
Connecting to the RCA Output  
The RCAØ connectors are used for equipment, such as a  
recording VCR or audio system.  
Owner’s Instructions  
Before operating, please read this manual thoroughly,  
or  
and retain it for future reference.  
cable television network  
Front (or Side) Panel  
Register your product at  
Œ Audio input  
Control Panel(depending on the model)  
´ Video input  
The actual configuration of your TV may be different,  
depending on your model.  
ˇ S-Video input  
¨ Headphone jack  
Whenever you connect an audio or video system to your  
Front (or Side) Panel  
television, ensure that all elements are switched off.  
Please be sure to match the color coded input terminals  
and cable jacks.  
Please be sure to match the color coded input terminals  
and cable jacks.  
Connecting to an Aerial or Cable Television Network  
Connecting to the RCA Input  
Connect the aerial or network input cable to the Œ (75  
coaxial socket).  
The Œ (AUDIO-L/R) and ´ (VIDEO) connectors are used  
for equipment, such as a camcorder, video disc player, or  
video game device.  
To view television channels correctly, a signal must be  
received by the set from one of the sources: an outdoor  
aerial, cable television network, or satellite network.  
If you are using an indoor aerial, you may need to adjust it  
when tuning your television until you obtain a picture that is  
both sharp and clear.  
Œ Input source selection  
´ On-screen menu display  
ˇ Volume adjustment  
¨ Channel selection  
ˆ Standby indicator  
Ø Remote control sensor  
Power on/off  
Connecting to the S-VIDEO Input  
The ˇ (S-VIDEO) and Œ (AUDIO-L/R) connectors are used  
for equipment with an S-Video output, such as a camcorder  
or VCR.  
Connecting to the SCART Input/Output  
Connecting Headphones  
The SCART´ and SCARTˇ connectors are used for  
equipment, such as a VCR, DVD, decoder, satellite receiver,  
video game device, or video disc player.  
The SCART´ is also used for equipment with an RGB  
output, such as a video game device or video disc player.  
The ¨ (headphone) jack is used for watching a television  
programme without disturbing the other people in the room.  
Prolonged use of headphones at a high volume may damage  
your hearing.  
You can use the ¨ buttons to switch the TV on when it is  
in standby mode depending on the model.  
The ˇ and ¨ buttons also have the same function as the  
œ///buttons on the remote control.  
If the remote control no longer works or you have  
misplaced it, you can use the controls on the panel of the  
television.  
When both the front (or side) AV and rear connectors  
are connected to external equipment, the front (or  
side) AV receives priority.  
continued...  
AA68-03628A-00  
English - 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Check antenna input  
Enter Exit  
Enjoy your watching  
2
3
Select the appropriated  
language by pressing the …  
or button. Press the  
ENTER button.  
9
When you have finished,  
press the MENU button.  
Viewing the Menus  
The Enjoy your watchingis displayed, and then the  
channel which has been stored will be activated.  
1
Press the MENU button.  
The main menu is displayed on the screen. Its left side  
has five icons: Input, Picture, Sound, Channel, and  
Setup.  
The Check antenna inputis displayed.  
Setup  
TV  
If any language is not selected, the language menu  
will disappear about 30 seconds later.  
Re-setting the Plug & Play  
Method: MENU /†  
(Setup) ENTER /†  
(Plug & Play) ENTER  
Plug & Play  
Language  
: English  
Time  
2
3
4
Press the or button to select one of the icons.  
Press the ENTER button to access the icon’s sub-menu.  
Make sure that the antenna  
is connected to the  
television (refer to page 1).  
Press the ENTER button.  
The Auto Storemenu is  
displayed with Area  
selected.  
Child Lock  
Blue Screen  
Melody  
Auto Store  
TV  
: Off  
: On  
ASIA W/EUROPE  
:
Area  
Search  
CIS E/EUROPE  
CHINA  
Demonstration  
HONGKONG U/K  
AUSTRALIA  
NZ/INDONESIA  
SOUTH AFRICA  
AMERICA  
Press the or button to move to items in the menu.  
Press the ENTER button to enter items in the menu.  
Move  
Enter  
Return  
Move  
Enter  
Return  
Press the //œ/button to change the selected  
items. Press the MENU button to return to the previous  
menu.  
4
5
Press the ENTER button again.  
Press the or button to select your area. Press the  
5
Press the EXIT button to exit from the menu.  
ENTER button.  
Search  
6
To search the channels,  
select Searchby pressing  
the or button. Press  
Start  
Input -  
Enter  
Return  
the ENTER button.  
Source List / Edit Name  
Search  
P 1 C-- -----  
7
Press the ENTER button  
again to start search  
channels. To stop the  
search, press the ENTER  
button.  
102MHz  
Source List  
----  
----  
----  
----  
----  
7
%
TV  
Source List  
Stop  
TV  
You can switch between  
viewing signal from  
AV1  
Enter  
Return  
Time  
AV2  
S-Video  
Component  
Setup - Plug & Play  
connected equipment, such  
as a VCR, DVD, set-top box,  
and the TV source  
TV  
When the channel  
--:--  
Clock  
am  
When the television is initially powered on, several basic  
customer settings proceed automatically and subsequently.  
The following settings are available.  
Sleep Timer  
On Timer  
: Off  
searching has finished, the  
Timemenu is displayed  
with Clockselected.  
--:--  
--:--  
On Timer Volume  
am Off  
am Off  
Move  
Enter  
Return  
Off Timer  
(broadcast or cable).  
:
10  
You can change the required external source simply  
by pressing the VIDEO button on the remote  
control. It might take a short period of time for  
pictures to be switched. To return to the TV mode,  
press the TV button on the remote control.  
8
Press the œ or button to  
move to the hour or minute.  
Plug & Play  
1
If the television is in standby  
mode, press the POWER  
button on the remote  
control.  
The Plug & Playis  
displayed. It flickers for a  
little while, and then  
Languagemenu is  
displayed.  
Move  
Enter  
Return  
Language  
English  
Set the hour or minute by pressing the or button.  
Français  
Türkçe  
Edit Name  
Edit Name  
TV  
continued...  
----  
You can give a name to the  
external source.  
AV1  
:
VCR  
AV2  
DVD  
Cable STB  
S-Video  
Component  
Move  
Enter  
Sat. STB  
AV Recv.  
DVD Recv.  
Game  
Camcorder  
DVD Combo  
continued...  
Move  
Enter  
Return  
English - 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Channel - Manual Store  
Channel - Add/Delete  
Channel - Auto Store  
Manual Store  
: P 3  
Add/Delete  
TV  
TV  
You can store channels,  
You can exclude channels you  
have chosen from the channels  
you scanned. When you scan  
through the stored channels,  
those you have chosen to skip  
are not displayed. All of the  
channels that you did not  
You can scan for the frequency ranges available to you (and  
availability depends on your country). Automatically allocated  
programme numbers may not correspond to actual or  
desired programme numbers. However you can sort  
numbers manually and clear any channels you do not wish  
to watch.  
Programme  
P 1 : Added  
P 2 : Added  
P 3 : Added  
P 4 : Added  
P 5 : Added  
including those received via  
cable networks. When storing  
channels manually, you can  
choose:  
Color System : AUTO  
Sound System : BG  
Search  
Channel  
Store  
: 46MHz  
: C 1  
:
?
-
Whether or not to store each  
of the channels found  
Move  
Adjust  
Return  
Move  
Enter  
Return  
-
The programme number of each stored channel which  
you wish to identify  
specifically choose to skip are displayed during scanning.  
Auto Store  
TV  
Channels are sorted and stored  
in the order which reflects their  
position in the frequency range  
(with lowest first and highest  
last). The programme originally  
selected is then displayed.  
ASIA W/EUROPE  
:
Area  
CIS E/EUROPE  
CHINA  
Search  
Select Addedor Deletedby pressing the ENTER button  
repeatedly.  
HONGKONG U/K  
AUSTRALIA  
NZ/INDONESIA  
SOUTH AFRICA  
AMERICA  
Programme (Programme number to be assigned to a  
channel)  
Color System: AUTO/PAL/SECAM/NT4.43/NT3.58  
Sound System: BG/DK/I/M  
Search (When you do not know the channel numbers):  
The tuner scans the frequency range until the first  
channel or the channel that you selected is received on  
the screen.  
Move  
Enter  
Return  
To stop the search before it  
has finished, press the  
MENU button.  
Search  
P 1 C-- -----  
102MHz  
7
%
When finished, the Sortmenu  
is displayed. To sort the stored  
channels into the desired  
Stop  
Enter  
Return  
Channel (When you know the number of the channel to  
be stored)  
numerical order, refer to “Channel - Sort”. To exit without  
You can also select the channel number directly by  
sorting, press the EXIT button.  
pressing the numeric buttons (0~9).  
Store (When you store the channel and associated  
programme number)  
Channel - LNA  
If there is no sound or abnormal sound, re-select the  
sound standard required.  
Channel  
TV  
This function is very useful in the  
situation that the TV is used in  
weak signal. LNAamplifies the  
TV signal in the weak signal  
area, but not noise.  
Auto Store  
Manual Store  
Add/Delete  
Sort  
Channel mode  
Off  
On  
LNA  
:
P (Programme mode): When completing tuning, the  
broadcasting stations in your area have been  
assigned to position numbers from P00 to P99. You  
can select a channel by entering the position number  
in this mode.  
Channel - Sort  
Move  
Enter  
Return  
Sort  
TV  
This operation allows you to  
change the programme numbers  
of stored channels. This  
operation may be necessary  
after using auto store.  
LNA(Low Noise Amplifier) setting is to be made for  
From  
To  
Store  
: P 1  
: P--  
each channel.  
:
?
C (Real channel mode): You can select a channel by  
entering the assigned number for each air  
broadcasting station in this mode.  
S (Cable channel mode): You can select a channel by  
entering the assigned number for each cable channel  
in this mode.  
If the picture is noisy with the LNAset to On, select Off.  
Depending on areas, factory mode of LNAwill be set up  
as Onor Off.  
Move  
Adjust  
Return  
From: Channel number to  
be changed.  
To: New channel number to be identified.  
Store: Confirmation the exchange of channel numbers.  
English - 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup -Time  
Setup - Child Lock  
Setup -  
Language / Blue Screen /  
Melody / Demonstration  
Time  
Child Lock  
TV  
TV  
Clock  
This feature allows you to  
prevent unauthorized users,  
such as children, from watching  
unsuitable programmes by  
muting out video and audio.  
Child Lock cannot be released  
using front (or side) panel  
--:--  
Clock  
am  
Child Lock  
Programme  
Lock  
: On  
You can set the television  
clock so that the current time  
is displayed when pressing  
the INFO button on the  
remote control. You must  
also set the time if you wish  
Sleep Timer  
On Timer  
Off Timer  
: Off  
: P 1  
--:--  
--:--  
On Timer Volume  
am Off  
am Off  
:
?
Setup  
TV  
Language  
:
10  
Plug & Play  
Language  
It is variable depending on  
the model. When you start  
using the television for the  
first time, you must select the  
language which will be used  
for displaying menus and  
indications.  
: English  
Time  
Move  
Enter  
Return  
Move  
Enter  
Return  
Child Lock  
Blue Screen  
Melody  
: Off  
: On  
to use the automatic on or off timers.  
When pressing the button (On/Off) on the front  
buttons. Only remote control can release the Child Lock  
setting, so keep the remote control away from children.  
Demonstration  
Move  
Enter  
Exit  
(or side) of the television, the clock setting will be  
reset.  
Child Lock: On/Off  
If you want to unlock a channel, set to Off.  
Programme: Channel number to be locked.  
Sleep Timer  
Blue Screen  
You can select a time period of between 30 and 180  
minutes after which the television automatically switches  
to standby mode.  
Lock: When press the ENTER button, the Lockedis  
If no signal is being received or the signal is very weak, a  
blue screen automatically replaces the noisy picture  
background. If you wish to continue viewing the poor  
picture, you must set the Blue Screento Off.  
displayed.  
You can select these options simply by pressing the  
If any channel is locked, you can not enter the  
SLEEP button on the remote control. If the sleep  
timer is not yet set, Offis displayed. If it is already  
set, the remaining time before which the television  
switches to standby mode is displayed.  
Channelmenu by using the control buttons on the  
television, and the Not availableis displayed. You  
can access by using the remote control only.  
Melody  
You can hear melody sound when the television is  
powered on or off.  
On Timer / Off Timer  
Demonstration  
You can set the On/Off timers so that the television will  
switch on or off automatically at the time you select.  
To become familiar with the various menus provided by  
the television, you can view the in built demonstration.  
Each of the menu options is displayed in turn. To exit  
from the demonstration, press the EXIT button.  
You must set the clock first.  
On Timer Volume  
The preferred volume can be set for when the timer  
automatically turns on the television.  
Auto Power Off  
When you set the timer “On”, the television will  
eventually turn off, if no controls are operated for 3  
hours after the TV was turned on by timer. This function  
is only available in timer “On” mode and prevents  
overheating or leakages, which may occur if a TV is on  
for too long (on holiday, for example).  
English - 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Volume  
DNIe Jr (Digital Natural Image engine Junior)  
(depending on the model)  
Picture -  
Each broadcasting station has its own signal conditions,  
and so it is not easy to adjust the volume every time the  
channel is changed. This feature lets you automatically  
adjust the volume of the desired channel by lowering the  
sound output when the modulation signal is high or by  
raising the sound output when the modulation signal is  
low.  
This feature bring you more detailed image with detail  
enhancement, contrast enhancement and white  
enhancement. New image compensation algorithm gives  
brighter, clearer, much detailed image to you. DNIe Jr  
technology will fit every signals into your eyes.  
Mode / Custom /  
ColorTone / Size /  
Digital NR / DNIe Jr /Tilt  
Picture  
: Dynamic  
TV  
Mode: Dynamic/  
Tilt(depending on the model)  
Mode  
Standard/Movie/Custom  
You can select the type of  
picture which best  
Custom  
Color Tone  
Size  
Pseudo Stereo  
If you find that the picture received is slightly tilted to one  
side, you can adjust the tilt setting (-7 to +7).  
: Normal  
: Normal  
: Off  
: On  
: 0  
This feature converts a monaural sound signal into two  
identical left and right channels. Once the Pseudo  
Stereois set to Onor Off, these settings apply to the  
sound effects such as Standard, Music, Movie, and  
Speech.  
Digital NR  
DNIe Jr  
Tilt  
corresponds to your viewing  
requirements.  
Move  
Enter  
Exit  
You can select these  
options simply by pressing the P.MODE button on  
the remote control.  
Turbo Plus  
This feature suitably emphasizes both higher and lower  
bands of sound (and includes other effects). You can  
enjoy more magnificent and dynamic sound when  
watching music, movie, or other channels.  
Custom: Contrast/Brightness/Sharpness/  
Color/Tint(NTSC only)  
The television has several settings which allow you to  
control the picture quality.  
Sound -  
You can change the options simply by pressing the  
If you make any changes to these settings, the  
picture mode is automatically switched to Custom.  
Mode / Equalizer /  
Auto Volume / Pseudo Stereo /  
Turbo Plus  
TURBO button on the remote control.  
Color Tone: Cool2/Cool1/Normal/Warm1/  
Warm2  
Sound  
TV  
Mode: Standard/Music  
/Movie/Speech/Custom  
You can select the type of  
special sound effect to be  
used when watching a given  
broadcast.  
Size  
Mode  
: Custom  
You can select the picture size which best corresponds to  
your viewing requirements. It is variable depending on  
the model.  
Equalizer  
Auto Volume  
: Off  
Pseudo Stereo : Off  
Turbo Plus  
: Off  
You can change the picture size simply by pressing  
the P.SIZE button on the remote control.  
Move  
Enter  
Exit  
You can select these  
options simply by pressing the S.MODE button on  
Digital NR  
the remote control.  
If the signal received by the television is weak, you can  
activate this feature to reduce any static and ghosting  
that may appear on the screen.  
Equalizer  
The television has several settings which allow you to  
control the sound quality.  
continued...  
If you make any changes to these settings, the  
sound mode is automatically switched to Custom.  
continued...  
English - 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ˇ
¨
(sub-page)  
Teletext Feature(depending on the model)  
Troubleshooting  
Used to display the available sub-page.  
Most television stations provide written information services  
via teletext. The index page of the teletext service gives you  
information on how to use the service. In addition, you can  
select various options to suit your requirements by using the  
remote control buttons.  
Before contacting the Samsung after-sales service, perform  
the following simple checks. If you cannot solve the problem  
using the instructions below, note the model and serial  
number of the television and contact your local dealer.  
(teletext on/mix)  
Press to activate teletext mode after selecting the  
channel providing the teletext service. Press it again to  
overlap the teletext with the current broadcasting screen.  
ˆ Coloured buttons (red/green/yellow/blue)  
If the FASTEXT system is used by a broadcasting  
company, the different topics covered on a teletext page  
are color-coded and can be selected by pressing the  
coloured buttons. Press one of them corresponding to the  
required. The page is displayed with other coloured  
information that can be selected in the same way. To  
display the previous or next page, press the  
No sound or picture  
For teletext information to be displayed correctly,  
Check that the mains lead has been connected to a  
wall socket.  
channel reception must be stable. Otherwise,  
information may be missing or some pages may not be  
displayed.  
Check that you have pressed the  
button (On/Off)  
and the POWER button.  
Check the picture contrast and brightness settings.  
Check the volume.  
Normal picture but no sound  
Check the volume.  
Check whether the volume MUTE button on the  
remote control has been pressed.  
corresponding coloured button.  
Ø
(page up)  
Used to display the next teletext page.  
(mode)  
No picture or black and white picture  
Adjust the color settings.  
Check that the broadcast system selected is correct.  
Press to select the teletext mode (LIST/FLOF). If you  
press it in the LIST mode, it switches into the List save  
mode. In the List save mode, you can save teletext page  
into list using the  
(store) button.  
Sound and picture interference  
Try to identify the electrical appliance that is affecting  
the television, then move it further away.  
Plug the television into a different mains socket.  
(page down)  
Used to display the previous teletext page.  
(reveal)  
Used to display the hidden text (answers to quiz games,  
for example). To display normal screen, press it again.  
Blurred or snowy picture, distorted sound  
Check the direction, location and connections of your  
aerial.  
˝
Ô
(size)  
This interference often occurs due to the use of an  
indoor aerial.  
Press to display the double-size letters in the upper half  
of the screen. For lower half of the screen, press it again.  
To display normal screen, press it once again.  
Remote control malfunctions  
Replace the remote control batteries.  
Clean the upper edge of the remote control  
(transmission window).  
Check that the “+” and “-” ends of the batteries are  
inserted correctly.  
Check that the batteries are drained.  
Œ
´
(hold)  
(store)  
Used to hold the display on a given page if the selected  
page is linked with several secondary pages which follow  
on automatically. To resume, press it again.  
Used to store the teletext pages.  
(index)  
Used to display the index (contents) page at any time  
while you are viewing teletext.  
English - 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OSD Map  
: It is variable depending on the model.  
Input  
-
-
Source List  
Edit Name  
-
VCR / DVD / Cable STB / Sat. STB / AV Recv. / DVD Recv. / Game /  
Camcorder / DVD Combo  
Picture  
-
-
-
-
-
-
-
Mode  
-
-
-
Dynamic / Standard / Movie / Custom  
Contrast / Brightness / Sharpness / Colour / Tint (NTSC only)  
Cool2 / Cool1 / Normal / Warm1 / Warm2  
Custom  
Colour Tone  
Size  
Digital NR  
DNIe Jr  
Tilt  
-
-
Off / On  
Off / On  
Sound  
-
-
-
-
-
Mode  
-
Standard / Music / Movie / Speech / Custom  
Equalizer  
Auto Volume  
Pseudo Stereo  
Turbo Plus  
-
-
-
Off / On  
Off / On  
Off / On  
Channel  
-
Auto Store  
-
Area  
-
ASIA W/EUROPE / CIS E/EUROPE / CHINA /  
HONGKONG U/K /AUSTRALIA / NZ/INDONESIA  
SOUTH AFRICA / AMERICA  
-
-
-
-
-
-
-
Search  
Programme  
Color System  
Sound System  
Search  
Channel  
Store  
-
Manual Store  
-
-
AUTO / PAL / SECAM / NT4.43 / NT3.58  
BG / DK / I / M  
-
-
-
Add/Delete  
Sort  
LNA  
-
Off / On  
Setup  
-
-
-
Plug & Play  
Language  
Time  
-
-
-
-
-
-
-
-
Clock  
Sleep Timer  
On Timer  
Off Timer  
On Timer Volume  
Off / On  
Off / On  
Off / On  
-
-
-
-
Child Lock  
Blue Screen  
Melody  
Demonstration  
English - 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Quantum Wheelchair Q6 Edge HD User Guide
Radio Shack Network Card 273 316 User Guide
RCA Cooktop S2202 User Guide
Realistic Satellite Radio Pro 38 User Guide
Roland Musical Instrument PCR 30 User Guide
Rotel Stereo Receiver RCD 971 User Guide
Rubbermaid Outdoor Storage 3673 User Guide
Samsung Cell Phone Accessories GT S7582 User Guide
Sanyo Battery Charger CR17450E R User Guide
Sears Water System CWF User Guide