Samsung Blu ray Player BDH5900 User Guide

BD-H5900

™

Blu-ray Disc Player

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service,

please register your product at

www.samsung.com/register

ENGLISH

Download from Www.Somanuals.com. All Manuals Search And Download.

●

12. Use only with the cart,

stand, tripod, bracket,

When cleaning, wipe gently from the

inside to the outside of the disc.

As the video resolution in 3D play mode

is fixed according to the resolution

of the original 3D video, you can

not change the resolution to your

preference.

Using the 3D function

or table specified by

the manufacturer,

or sold with the

apparatus. When

a cart is used, use

caution when moving the cart/apparatus

combination to avoid injury from tip-over.

●

Disc Storage

IMPORTANT HEALTH AND SAFETY

INFORMATION FOR 3D PICTURES. Read

and understand the following safety

information before using the 3D function.

Do not keep in direct sunlight.

Keep in a cool ventilated area.

Keep in a clean protection jacket

and store vertically.

●

Some functions such as BD Wise,

screen size adjustment, and resolution

adjustment may not operate properly in

3D play mode.

●

Some viewers may experience

discomfort while viewing 3D TV such as

dizziness, nausea, and headaches.

If you experience any such symptom,

stop viewing 3D TV, remove the 3D

Active Glasses, and rest.

Handling Cautions

●

13. Unplug this apparatus during lightning

storms or when unused for long

periods of time.

You must use a high-speed HDMI cable

for proper output of the 3D signal.

●

Do not expose this apparatus to

dripping or splashing. Do not put

objects filled with liquids, such as vases

on the apparatus.

To turn this apparatus off completely,

you must pull the power plug out of

the wall socket. Consequently, the

power plug must be easily and readily

accessible at all times.

Do not plug multiple electric devices

into the same wall socket. Overloading a

socket can cause it to overheat, resulting

in a fire.

Before connecting other components to

this player, be sure to turn them off.

Stay at least three times the width of the

screen from the TV when watching 3D

images. For example, if you have a 46-

inch screen, stay 138 inches (11.5 feet)

from the screen.

●

Watching 3D images for an extended

14. Refer all servicing to qualified service

personnel. Servicing is required when

the apparatus has been damaged in any

way, such as when the power-supply

cord or plug is damaged, liquid has

been spilled or objects have fallen into

the apparatus, the apparatus has been

exposed to rain or moisture, does not

operate normally, or has been dropped.

period of time may cause eye strain. If

you feel eye strain, stop viewing 3D TV,

remove your 3D Active Glasses, and rest.

●

A responsible adult should frequently

check on children who are using the 3D

function.

If there are any reports of tired eyes,

headaches, dizziness, or nausea, have

the child stop viewing 3D TV and rest.

Place the 3D video screen at eye level

for the best 3D picture.

When the player is connected to some

3D devices, the 3D effect may not

function properly.

●

This player does not convert 2D content

into 3D.

●

Do not use the 3D Active Glasses

●

Disc Storage & Management

for other purposes (Such as general

eyeglasses, sunglasses, protective

goggles, etc.).

"Blu-ray 3D" and "Blu-ray 3D" logo

are trademarks of the Blu-ray Disc

Association.

If you move your player suddenly from a

cold place to a warm place, condensation

may occur on the operating parts and

lens and cause abnormal disc playback.

If this occurs, unplug the player, wait for

two hours, and then connect the plug to

the power outlet. Then, insert the disc,

and try to play back again.

●

Holding Discs

Fingerprints or scratches

on a disc may reduce

sound and picture

●

Do not use the 3D function or 3D

Active Glasses while walking or moving

around. Using the 3D function or 3D

Active Glasses while moving around may

cause you to bump into objects, trip,

and/or fall, and cause serious injury.

quality or cause skipping

Avoid touching the surface of a disc

where data has been recorded.

this user's manual may be reproduced

or copied without the prior written

Hold the disc by the edges so that

fingerprints will not get on the surface.

●

If you want to enjoy 3D content,

●

If the product makes an abnormal noise

or produces a burning smell or smoke,

turn off the power switch immediately

and disconnect the power plug from the

wall outlet. Then, contact the nearest

customer service center for technical

assistance. Do not use the product.

Using the product as it is may cause a

fire or an electric shock.

connect a 3D device (3D compliant AV

receiver or TV) to the player's HDMI OUT

port using a high-speed HDMI cable.

Put on 3D glasses before playing the 3D

content.

permission of Samsung Electronics Co.,Ltd.

Do not stick paper or tape on the disc.

●

Cleaning Discs

If you get fingerprints

or dirt on a disc, clean

it with a mild detergent

diluted in water and

wipe with a soft cloth.

●

The player outputs 3D signals only

through HDMI cable connected to the

HDMI OUT port.

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Getting Started

SAFETy INFORMATION

Display Settings.................................... 11

Audio Settings ..................................... 12

Network Settings ................................. 13

System Settings.................................... 16

Language Settings ............................... 16

Security Settings................................... 16

General Settings .................................. 17

Support Settings .................................. 17

Before using the User Manual

Warning................................................. 2

Precautions............................................ 2

Disc Storage & Management.................. 3

Handling Cautions ................................. 3

Using the 3D functions........................... 3

disc Types and Contents your player can play

Media

disc Type

details

Blu-ray Disc

3D Blu-ray Disc

BD-ROM or BD-RE/-R recorded in the BD-RE format.

DVD-VIDEO

DVD-RW

DVD-R

DVD+RW

DVD+R

VIDEO

DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-

R/+R that have been recorded and finalized, or a USB

storage media containing MKV or MP4 contents.

GETTING STARTEd

MEdIA pLAy

Before using the User Manual ................ 4

Logos of Discs the player can play........... 5

Accessories ............................................ 6

Front Panel ............................................ 7

Rear Panel ............................................. 7

Remote Control ..................................... 7

Playing a Commercially Recorded Disc .. 18

Playing Files on a USB Device................ 18

Playing a Disc with User Recorded

CD-RW/-R,

Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R

MUSIC

PHOTO

DVD-RW/-R, or a USB storage media containing MP3 or WMA

BD-RE/-R

contents.

Content ............................................... 18

CD-RW/-R,

Photos recorded on CD-RW/-R, DVD-RW/-R, BD-

Playing Content Located on Your PC or

AllShare Device through the Blu-ray Disc

Player................................................... 19

DVD-RW/-R, RE/-R or a USB storage media containing JPEG

BD-RE/-R contents.

CONNECTIONS

NOTES

■

✎

Controlling Video Playback................... 19

Controlling Music Playback................... 19

Playing Photo Contents........................ 21

Using Netflix ........................................ 21

Using Pandora ..................................... 22

Using You Tube.................................... 22

Connecting to a TV ................................ 8

Connecting to an Audio System ............. 8

Connecting to a Network Router............ 9

The player may not play certain CD-RW/-R and DVD-R because of the disc type or

recording conditions.

If a DVD-RW/-R has not been recorded properly in DVD video format, it will not be playable.

Your player will not play content that has been recorded on a DVD-R at a bit-rate

that exceeds 10 Mbps.

Your player will not play content that has been recorded on a BD-R or USB device

at a bitrate that exceeds 25 Mbps.

Playback may not work for some types of discs, or when you use specific

functions, such as angle change and aspect ratio adjustment. Information about

the discs is written in detail on the disc box. Please refer to this if necessary.

When you play a BD-J title, loading may take longer than a normal title or some

functions may perform slowly.

■

SETTINGS

The Initial Settings Procedure................ 10

Wired Network .................................... 10

Wireless Network................................. 10

Menu Navigation ................................. 11

Accessing the Settings Menu................ 11

AppENdIx

■

Troubleshooting................................... 24

Specifications....................................... 25

disc types your player cannot play

●

HD DVD

DVD-ROM/PD/

MV, etc

DVD-RAM

Super Audio CD

(except CD layer)

DVD-RW (VR mode)

CVD/CD-ROM/

CDV/CD-G/CD-I/LD

(CD-Gs play audio

only, not graphics.)

3.9 GB DVD-R for

Authoring.

Download from Www.Somanuals.com. All Manuals Search And Download.

●

Your player only supports video with a frame rate under 30fps (frames per second).

Your player only supports USB Mass Storage Class (MSC) devices such as thumb drives

and USB HDD. (HUB is not supported.)

Certain USB HDD Devices, multi-card readers and thumb drives may not be

compatible with this player.

If some USB devices require excessive power, they may be limited by the circuit safety

device.

If playback from a USB HDD is unstable, provide additional power by plugging the

HDD into a wall socket.

If the problem continues, contact the USB HDD manufacturer.

SAMSUNG is not responsible for any data file damage or data loss.

Your player does not support NTFS compressed files, sparse files, or encrypted files.

You can repair or format a USB device on your Desktop PC. (MS-Windows OS only)

Logos of Discs the player can play

Region Code

Both players and discs are coded by region.

These regional codes must match for a

disc to play. If the codes do not match, the

disc will not play.

The Region Code for this player is

displayed on the rear panel of the player.

●

Blu-ray Disc

BD-LIVE

disc Region

Area

Type

Code

●

North America, Central

NTSC broadcast

system in U.S.A,

America, South America,

Korea, Japan, Taiwan, Hong

Kong and South East Asia.

3D Blu-ray Disc

Canada, Korea, Japan

Video File Support

Europe, Greenland,

French territories, Middle

East, Africa, Australia

and New Zealand.

Blu-ray

disc

Supported File Formats

File

Extension

Audio

Codec

Container

Video Codec

Resolution

Notes on the USB connection

MP3

Dolby Digital

DTS

●

1920x1080

Your player supports USB storage media,

MP3 players, digital cameras, and USB

card readers.

The player does not support folder or

file names longer than 128 characters.

Some USB/External HDD/digital camera

devices may not be compatible with the player.

Your player supports the FAT16, FAT32,

and NTFS file systems.

MP4v3

India, China, Russia,

Central and South Asia.

*.avi

AVI

WMA

PCM

●

1920x1080

H.264 BP/MP/HP

The U.S., U.S. territories

and Canada

●

Europe, Japan, the

Middle East, Egypt,

South Africa, Greenland

1920x1080

VC-1 AP

MP3

Dolby Digital

DTS

●

*.mkv

MKV

H.264 BP/MP/HP

●

Connect USB devices directly to the player’s

USB port. Connecting through a USB cable

Taiwan, Korea, the

Philippines, Indonesia,

Hong Kong

1920x1080

VC-1 AP

VC-1 SM

WMV

(wmv9)

may cause compatibility problems

*.wmv

*.mp4

WMA

AAC

dVd-

VIdEO

●

Inserting more than one memory device

into a multi-card reader may cause the

reader to operate improperly.

Mexico, South America,

Central America,

Australia, New Zealand,

Pacific Islands, Caribbean

MP4 (mp4v)

H.264 BP/MP/HP

MPEG1

●

MP4

The player does not support the PTP protocol.

Do not disconnect a USB device while it is

transferring, playing, or recording files.

The bigger the image resolution, the

longer the image takes to display.

This player cannot play MP3 files with

DRM (Digital Rights Management)

downloaded from commercial sites.

Russia, Eastern Europe,

India, most of Africa,

North Korea, Mongolia

●

MP1, 2

Dolby Digital

DTS

*.mpg

*.mpeg

MPEG2

China

H.264 BP/MP/HP

Download from Www.Somanuals.com. All Manuals Search And Download.

Limitations

•

AVCHd (Advanced Video Codec High definition)

Even when a file is encoded by a supported codec listed above, the file might not be

played if its content has a problem.

●

This player can play back AVCHD format discs. These discs are normally recorded and

used in camcorders.

Normal playback is not guaranteed if the file’s container information is wrong or the

file itself is corrupted.

●

The AVCHD format is a high definition digital video camera format.

●

The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the

Files having a higher Bit rate/frame rate than standard may stutter during sound/

video playback.

conventional image compressing format.

●

The Seek (skip) function is not available if the file’s index table is damaged.

Some AVCHD discs use the "x.v.Color" format. This player can play back AVCHD discs

that use the "x.v.Color" format.

Video decoder

•

●

"x.v.Color" is a trademark of Sony Corporation.

Supports up to H.264 Level 4.1 and AVCHD

Does not support H.264 FMO/ASO/RS and VC1 SP/MP/AP L4

MPEG4 SP, ASP :

Below 1280 x 720 : 60 frames max

Above 1280 x 720 : 30 frames max

●

"AVCHD" and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co.,

Ltd. and Sony Corporation.

NOTES

■

✎

Some AVCHD format discs may not play, depending on the recording condition.

Does not support GMC 2 or higher

AVCHD format discs need to be finalized.

Audio decoder

■

"x.v.Color" offers a wider color range than normal DVD camcorder discs.

Supports WMA 7, 8, 9 and STD

Does not support WMA sampling rate of 22050Hz mono.

AAC: Max sampling rate: 96Khz (8, 11, 12, 16, 22,24, 32,44.1, 48, 64, 88.2, 96)

Max bitrate: 320kbps

Accessories

The following accessories are included with your Blu-ray player:

Music File Support

File

Extension

Audio

Codec

Container

Support Range

*.mp3

MP3

REPEAT

FULL

VIEW

A-B

SCREEN

* Sampling rates (in kHz) - 8, 11, 16, 22,

32, 44.1, 48

Batteries for Remote

Control (AAA Size)

*.wma

WMA

User Manual

(AK68-02402A)

Remote Control

(AK59-00149A)

* Bit rates - All bit-rates from 5kbps to

355kbps

(4301-000115)

Picture File Support

File Extension

Type

Resolution

15360x8640

*.jpg

*.jpeg

*.jpe

JPEG

PNG

*.png

Download from Www.Somanuals.com. All Manuals Search And Download.

Front Panel

Remote Control

pLAy/pAUSE BUTTON

Tour of the Remote Control

STOp BUTTON

Turn the player on and off.

Turn the TV on and off.

OpEN/CLOSE BUTTON

pOWER BUTTON

After setup, allows you to set the input

source on your TV.

TV volume adjustment.

Press to open and close the disc tray.

Press the number buttons to operate options.

Use to enter the disc menu.

Use to enter the popup menu/title menu.

Press to skip backwards or forwards.

Press to search a disc backwards or

forwards.

Press to stop a disc.

Press to play a disc.

Press to pause a disc.

Press to move to the Home menu.

USB HOST

REMOTE CONTROL SENSOR

Press to switch the Blu-ray Disc/DVD’s

subtitle language.

Use to access various audio functions on

a disc (Blu-ray Disc/DVD).

dISC TRAy

Press to use the Tools menu.

Use to display the playback information

when playing a Blu-ray Disc/DVDs.

NOTES

✎

Use to select menu items and change

menu values.

■

When the player displays the Blu-ray disc menu of a commercially recorded movie

disc, you must select Play Movie or Start in the disc menu, and then press the

button to play the movie.

You can perform software upgrades using the USB Host jack with a USB flash

memory stick only.

Press to exit the menu.

Return to the previous menu.

These buttons are used both for menus on the

player and also several Blu-ray Disc functions.

■

Press to see the full screen on a TV.

During Blu-ray Disc/DVD playback, the

Full Screen button does not operate.

BONUS REPEAT REPEAT

FULL

SCREEN

VIEW

A-B

Press to use the bonusview function.

Allows you to repeat a title, chapter,

track, or disc.

Allows you to repeat A-B disc.

Rear Panel

Installing batteries

●

Check if the batteries are drained.

Check if the remote sensor is blocked by obstacles.

Check if there is any fluorescent lighting nearby.

CAUTION

■

Dispose of batteries according to local environmental

regulations. Do not put them in the household trash.

Do not dispose of batteries in a fire.

Do not short circuit, disassemble or overheat the batteries.

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

■

NOTES

✎

■

If the remote does not operate properly:

●

HdMI OUT

LAN

dIGITAL AUdIO OUT

Check the polarity (+/–) of the batteries.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting to an Audio System

Connections

You can connect the Blu-ray player to an audio system using one of the methods

illustrated below.

Connecting to a TV

Do not connect the power cord to the wall outlet until you have made all the other

connections.

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the

product to the HDMI IN jack on your TV.

When you change the connections, turn off all devices before you start.

Do not connect the power cord to the wall outlet until you have made all the other

connections.

Method 1 Connecting to an HdMI supported AV receiver

When you change the connections, turn off all devices before you start.

●

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the

product to the HDMI IN jack on your receiver.

●

Best quality (Recommended)

Method 2 Connecting to an AV receiver with dolby digital or a dTS decoder

●

Using a digital Coaxial cable (not supplied), connect the Coaxial Digital Audio Out

Audio

Video

jack on the product to the Digital Coaxial In jack of the receiver.

●

Good quality

●

You will hear sound only through the front two speakers with Digital Output set to

PCM.

NOTES

✎

■

If you use an HDMI-to-DVI cable to connect to your display device, you must also

connect the Digital Audio Out on the player to an audio system to hear audio.

An HDMI cable outputs digital video and audio, so you don't need to connect an

audio cable.

■

Method 1

Method 2

Audio

■

Depending on your TV, certain HDMI output resolutions may not work. Please

refer to the user manual of your TV.

■

When you connect the player to your TV using the HDMI cable or to a new TV,

and then turn it on for the first time, the player automatically sets the HDMI

output resolution to the highest supported by the TV.

A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color to

Off in the menu.

■

To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a

High speed HDMI cable.

■

HDMI outputs only a pure digital signal to the TV.

If your TV does not support HDCP (High-bandwidth Digital Content Protection),

random noise appears on the screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting to a Network Router

Wireless Network

You can connect your player to your network router using one of the methods illustrated

below.

To use the AllShare network functionality, you must connect your PC to your network as

shown in the illustrations.

The connection can be wired or wireless.

Wired Network

Wireless Router

Broadband modem

(with integrated router)

Broadband

service

Broadband

service

NOTES

✎

■

If your wireless router supports DHCP, this player can use a DHCP or static IP address to

connect to the wireless network.

■

Router

Set your wireless router to Infrastructure mode. Ad-hoc mode is not supported.

The player supports only the following wireless security key protocols:

WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),

WPA2-PSK (TKIP/AES)

Broadband

service

■

Select a channel on the wireless router that is not currently being used. If the channel set

for the wireless router is currently being used by another device nearby, it will result in

interference and communication failure.

Broadband

modem

In compliance with the newest Wi-Fi certification specifications, Samsung Blu-ray players

do not support WEP, TKIP, or TKIP-AES (WPS2 Mixed) security encryption in networks

running in the 802.11n mode.

NOTES

✎

Wireless LAN, by its nature, may cause interference, depending on the operating

conditions (router performance, distance, obstacles, interference by other radio devices,

etc).

■

Internet access to Samsung's software update server may not be allowed, depending on

the router you use or your ISP's policy. For more information, contact your ISP (Internet

Service Provider).

■

DSL users, please use a router to make a network connection.

Download from Www.Somanuals.com. All Manuals Search And Download.

Wired Network

Initial Settings I Network

Security Key

Settings

Enter security key.

linksys3

solugen_edu#2

iptime23

1. The Blu-ray player automatically verifies

solugen_edu#1

your wired network.

Caps

123#&

ENG

Clear

The Initial Settings Procedure



Initial Settings



done

TV Aspect and Network will be set.

▲

▼

Cancel

Initial Settings I Network

.com

Each setting may be changed later under "Settings"

◀

▶

WpS(pBC)

Refresh

●

The Home screen will not appear if you

Select

Return

Select your network type.

do not configure the initial settings.

Network type

Wired

Skip

Move

Select

Start

●

The OSD (On Screen Display) may

change in this player after you

upgrade the software version.

The access steps may differ depending

on the menu you selected.

After the initial settings process is

complete, you can then operate the

panel buttons and remote control.

Connect

3. If your network has a password, use

the keyboard to enter it. Press the

Network cable connected.

●

Select

number buttons on your remote to

enter numbers. Use the keyboard to

enter letters. If you want to display the

password as you enter it, select Show

Password on the right. When finished,

use the ▲▼◀▶ buttons to select Done,

Skip

Move

Select

●

3. Press the

button. The TV Aspect

screen appears.

2. After the player verifies the network,

press the button.

4. On the TV Aspect screen, select the

After you have connected the player to your

TV, turn on the TV and player. When you turn

on the player the first time, the player's Initial

Settings screen appears on the TV. The Initial

Setting procedure lets you set the On Screen

Display (OSD) and menu languages, the

aspect ratio (screen size), the network type,

and connect the player to your network.

desired TV Aspect Ratio, and then press

and then press the

button. If you

have no password, go to Step 4.

3. Go to Step 6 on the left side of the

the

appears.

button. The Network screen

page.

4. After the player verifies the network,

NOTES

■

✎

press the

button.

Wireless Network

An explanation of each Aspect Ratio

5. Go to Step 6 on the left side of the page.

appears on the screen. Highlight each

choice to see each explanation. If you

have an HDTV, we suggest you choose

16:9 original.

1. The Blu-ray player automatically

searches for and then lists all wireless

networks that are within range.

NOTES

■

✎

To run the Initial Settings procedure, follow

these steps:

The Home screen will not appear

if you do not configure the initial

settings except as noted below.

If you press the BLUE (d) button

during network setup, you can

access the Home screen even if the

network setup is not completed yet.

When you return to the Home

screen, the full screen mode is

cancelled automatically.

1. Plug in the Blu-ray player, turn on your

TV, and then turn on the Blu-ray player by

pressing the pOWER button on the remote.

The Initial Settings Language screen appears.

5. If you have connected a LAN cable

to the Blu-ray player, Initial Setup

defaults to Wired Network. Go to

Wired Network on the right side of the

page. If you have not connected a LAN

cable, Initial Setup defaults to Wireless

Network. Go to Wireless Network on

the right side of the page.

Initial Settings I Network

■

Select your network type.

Network type

Wireless network

Add Network

Wireless

you can connect your Blu-ray

player to the internet. please

select which wireless network

to use.

Initial Settings I On-Screen Language

■

Select

language for the on-screen displays.

WpS(pBC)

Български

Hrvatski

Skip

Move

Select

■

If you want to display the Initial

Cestina

NOTES

✎

Setting screen again to make changes,

dansk

press the

button on the front panel

■

Netherlands

English

If you have no network, select Skip by

pressing the BLUE (d) button, and then

go to Step 6.

2. Select a network, and then press the

of the player for more than 5 seconds

with no disc inserted. This resets the

player to its default settings.

button. The keyboard appears.

Move

Select

6. The Initial Settings Complete window

appears and remains on the screen

for a few moments. Then, the Home

screen appears.

■

After the initial settings process is

complete, you can operate the HDMI-

CEC function.

2. Select the desired language, and then press

the button. The Start screen appears.

Download from Www.Somanuals.com. All Manuals Search And Download.

■

●

■

If you want to use the

Home Menu

Depending on the content and the

position of the picture on your TV

screen, you may see vertical black bars

on the left side, right side, or both sides.

Accessing the Settings Menu

Anynet+(HDMI-CEC) function to aid

in the initial set up process, please

follow the instructions below.

To access the Settings menu and sub-

menus, follow these steps:

play disc

photos

Videos

Music

1) Connect the player to an

Anynet+(HDMI-CEC) compliant

Samsung TV using HDMI Cable.

1. Press the pOWER button.

TV Aspect Ratio

The Home Menu appears.

Depending on the type of television you have,

you may want to adjust the screen size setting.

2. Press the ▲▼◀▶ buttons to select

2) Set the Anynet+(HDMI-CEC) feature

to On in both the TV and the player.

Empty disc tray

Settings, and then press the

button.

3) Set the TV to the Initial Settings

Procedure.

3. Press the ▲▼ buttons to select the desired

submenu, and then press the button.

NOTES

✎

App

Screen Mirroring Change device

Settings

■

Depending on the disc type, some

aspect ratios may not be available.

■

If you leave the player in the stop

mode for more than 5 minutes

without using it, a screen saver will

appear on your TV. If the player is

left in the screen saver mode for

more than 25 minutes, the power

will automatically turn off.

4. Press the ▲▼ buttons to select the desired

item, and then press the button.

■

If you select an aspect ratio and

option which is different than the

aspect ratio of your TV screen, the

picture might appear to be distorted.

5. Press the ExIT button to exit the menu.

Selects Videos.

Selects Music.

Selects Settings.

NOTES

✎

■

The access steps may differ

Bd Wise (Samsung TVs only)

depending on the menu you selected.

The OSD (On Screen Display) may

change in this player after you

upgrade the software version.

BD Wise is Samsung’s latest inter-

connectivity feature.

Selects Change Device.

Selects Screen Mirroring.

Selects Photos.

Menu Navigation

When you connect a Samsung player and a

Samsung TV with BD Wise to each other via HDMI,

and BD Wise is on in both the player and TV, the

player outputs video at the video resolution and

frame rate of the Blu-ray Disc/DVDs.

Display Settings

You can configure various display options

such as the TV Aspect Ratio, Resolution, etc.

Selects Play disc.

Selects applications.

Selects More applications.

NOTES

✎

3d Settings

■

When BD Wise is on, the Resolution setting

automatically defaults to BD Wise and BD

Wise appears in the Resolution menu.

If the player is connected to a device that

Select whether to play a Blu-ray Disc with

3D contents in 3D Mode.

NOTES

✎

■

does not support BD Wise, you cannot use

the BD Wise function.

The Videos, Photos, and Music

options require that you have

an appropriate disc inserted into

the player or a USB flash device

attached to the player.

NOTES

✎

HOME Button : Press to move to

the Home menu.

■

For some 3D discs, to stop a movie

■

For proper operation of BD Wise,

during 3D playback, press the

button once.

set the BD Wise menu of both the

RETURN Button : Return to the

previous menu.

player and the TV to On.

The movie stops and the 3D mode

option is de-activated.

To change a 3D option selection

when you are playing a 3D movie,

Resolution

(Enter) / dIRECTION Button :

Move the cursor or select an item.

Activate the currently selected item.

Confirm a setting.

Lets you set the output resolution of the HDMI

video signal to Auto, 1080p, 1080i, 720p, or

480p. The number indicates the number of

lines of video per frame. The i and p indicate

interlaced and progressive scan, respectively.

The more lines, the higher the quality.

press the

button once.

The Blu-ray menu appears. Press

the button again, then select 3D

ExIT Button : Press to exit the

current menu.

Settings in the Blu-ray menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

NOTES

Resolution according to the output

mode

Audio Settings

✎

■

If the TV you connected to the player does not

support Movie Frame or the resolution you

selected, the message "If no pictures are shown

after selecting ‘Yes’, please wait for 15 seconds

to return to the previous resolution. Do you

want to change the resolution?" appears. If you

select yes, the TV’s screen will go blank for 15

seconds, and then the resolution will revert to

the previous resolution automatically.

digital Output

●

Blu-ray disc/E-contents/digital Contents

playback

Lets you select the digital audio output format that is suitable for your TV or AV Receiver.

For more details, please refer to the Digital Output Selection table below.

HdMI / connected

digital Output Selection

HdMI Mode

Output

■

If the screen stays blank after you have

Bitstream

(Re-encoded (Re-encoded

Bitstream

E-contents/

digital

contents

Setup

Bitstream

(Unprocessed)

Blu-ray

disc

changed the resolution, remove all discs, and

Setup

pCM

then press and hold the

button on the

■

dTS)

dolby d)

front of the player for more than 5 seconds.

All settings are restored to the factory default.

Access the Resolution function and reset

the output resolution to a resolution that is

compatible with your TV.

HdMI supported

AV receiver or

Coaxial

HdMI

Receiver

HdMI

Receiver

HdMI Receiver

or Coaxial

Connection

Coaxial

Resolution of

Blu-ray Disc

BD Wise

1080p

Max.

Up to

7.1ch

Re-encoded

Dolby Digital *

PCM

PCM 2ch

PCM

PCM 2ch Re-encoded DTS

Max.

■

When the factory default settings are

Auto

Resolution of Resolution of

TV input TV input

Dolby

Re-encoded

Dolby Digital *

restored, all stored user BD data is deleted.

Dolby Digital PCM 2ch PCM 2ch Dolby Digital

Re-encoded DTS

Digital

The Blu-ray Disc must have the 24 frame feature for

the player to use the Movie Frame (24Fs) mode.

Dolby Digital

Plus

Dolby

Digital Plus

Dolby

Re-encoded

Dolby Digital *

1080p@60F

(Movie Frame : 1080p@60F 1080p@60F

Off)

PCM 2ch PCM 2ch

Re-encoded DTS

Digital

Audio

Movie Frame (24Fs)

Dolby

Re-encoded

Dolby Digital *

Stream Dolby TrueHD PCM 2ch PCM 2ch Dolby TrueHD

Re-encoded DTS

Digital

on Blu-ray

Disc

Setting the Movie Frame (24Fs) feature to Auto

allows you to adjust the player’s HDMI output to

24 frames per second for improved picture quality.

You can enjoy the Movie Frame (24Fs) feature only

on a TV supporting this frame rate. You can select

Movie Frame only when the player is in the HDMI

1080p output resolution mode.

Movie Frame :

Re-encoded

Dolby Digital *

1080p@24F 1080p@24F

Auto (24Fs)

DTS

PCM 2ch PCM 2ch

DTS

Re-encoded DTS

DTS-HD High

1080i

720p

480p

1080i

720p

480p

1080i

720p

480p

Re-encoded

Dolby Digital *

Resolution PCM 2ch PCM 2ch Resolution

Re-encoded DTS

Audio

DTS-HD

Master Audio

DTS-HD

Master Audio

Re-encoded

Dolby Digital *

PCM 2ch PCM 2ch

Re-encoded DTS

PCM 2ch

PCM

PCM 2ch PCM 2ch PCM 2ch PCM 2ch

PCM 2ch

HdMI Color Format

●

Audio

dVd playback

Dolby

Digital

Dolby

Digital

Stream on Dolby Digital PCM 2ch PCM 2ch

DVD

Dolby Digital Dolby Digital

Lets you set the color space format for

HDMI output to match the capabilities of

the connected device (TV, monitor, etc).

HdMI / connected

HdMI Mode

480i

Output

DTS

PCM 2ch PCM 2ch

DTS

Setup

Decodes main

feature audio

and BONUSVIEW

audio stream

together into PCM

audio and adds

Navigation Sound

Effects, then re-

encodes the PCM

audio into Dolby

Digital bitstream

Decodes main

feature audio and

BONUSVIEW audio

stream together

into PCM audio and

adds Navigation

Sound Effects, then

re-encodes the

Outputs only main

feature audio stream

so that your AV

receiver can decode

the audio bitstream.

You will not hear

BONUSVIEW audio

and Navigation Sound

Effects.

Decodes main

feature audio

and BONUSVIEW

audio stream

together into PCM

audio and adds

Navigation Sound

Effects.

BD Wise

HdMI deep Color

Auto

1080p

1080i

720p

480p

Max. Resolution of TV input

Definition

for Blu-ray

Disc

Lets you output video from the HDMI OUT jack with

Deep Color. Deep Color provides more accurate

color reproduction with greater color depth.

Any

1080p

1080i

720p

480p

PCM audio into DTS

bitstream

progressive Mode

Lets you improve picture quality when

viewing DVDs.

If Source Stream is 2ch, "Re-encoded Dolby D" Settings are not applied.

Download from Www.Somanuals.com. All Manuals Search And Download.

Blu-ray Discs may include three audio streams :

If you are connecting to a wired network,

connect the player to your router

using a LAN cable before you start the

configuration procedure.

If you are connecting to a wireless

network, disconnect any wired network

connection before you begin.

3. Select the IP Setting field, and then

press the button.

dynamic Range Control

Main Feature Audio : The audio

soundtrack of the main feature.

Lets you apply dynamic range control to

Dolby Digital, Dolby Digital Plus, and Dolby

True HD audio.

4. Select Enter manually in the IP Setting

field, and then press the button.

BONUSVIEW audio : An additional soundtrack

such as the director or actor’s commentary.

5. Select a value to enter (Ip Address,

●

Auto : Automatically controls the

dynamic range of Dolby TrueHD audio,

based on information in the Dolby

TrueHD soundtrack.

for example), and then press the

button.

Navigation Sound Effects : When you choose

a menu navigation selection, a Navigation

Sound Effect may sound. Navigation Sound

Effects are different on each Blu-ray Disc.

To begin configuring your network

connection, follow these steps:

Use the number keypad on your

remote control to enter the numbers

for the value. Use the ◀▶ buttons

on the remote control to move from

entry field to entry field within a value.

When done with one value, press the

Also turns dynamic range control on for

Dolby Digital and Dolby Digital Plus.

Wired Network

NOTES

✎

■

●

Be sure to select the correct Digital

Off : Leaves the dynamic range uncompressed,

letting you hear the original sound.

^ĞWired - Automatic

Output or you will hear no sound or just

loud noise.

If the HDMI device (AV receiver, TV)

button.

On : Turns dynamic range control on for all three

Dolby formats. Quieter sounds are made louder

and the volume of loud sounds is reduced.

1. In the Home screen, select Settings,

■

6. Press the ▲ or ▼ button to move to

another value, and then enter the

numbers for that value following the

instructions in Step 5.

and then press the

button.

is not compatible with compressed

formats (Dolby Digital, DTS), the audio

signal outputs as PCM.

2. Select Network, and then press the

button.

downmixing Mode

■

Regular DVDs do not have BONUSVIEW

3. Select Network Settings, and then

7. Repeat Steps 5 and 6 until you have

audio and Navigation Sound Effects.

Some Blu-ray Discs do not have BONUSVIEW

Lets you select the multi-channel downmix method

that is compatible with your stereo system. You

can choose to have the player downmix to normal

stereo or to surround compatible stereo.

press the

button.

filled in all values.

■

4. Select Wired in the Network Settings

screen, and then press the button.

audio and Navigation Sound Effects.

If you play MPEG audio soundtracks, the

NOTES

■

✎

■

You can get the Network values

from your Internet provider.

audio signal outputs as PCM regardless

of your Digital Output selections (PCM

or Bitstream).

5. Select Connect button, and then press

the button. The product detects

8. When finished entering all the values,

press the RETURN or ExIT buttons. The

player verifies the network connection

and then connects to the network.

Network Settings

the wired connection, verifies the

network connection and then connects

to the network.

■

If your TV is not compatible with

When you connect this player to a network,

you can use network based applications and

functions such as BD-LIVE, and upgrade

the player's software through the network

connection. For more information, see pages

21~23. Instructions for configuring the

network connection start below.

compressed multi-channel formats (Dolby

Digital, DTS), the player may output PCM

2ch downmixed audio even though you

selected Bitstream (either Re-encoded or

Unprocessed) in the setup menu.

^ĞWired - Manual

Wireless Network

If you have a static IP address or the

Automatic procedure does not work, you'll

need to set the Network Settings values

manually.

You can setup a wireless network

connection in four ways:

■

If your TV is not compatible with PCM

sampling rates over 48kHz, the player

may output 48kHz downsampled

PCM audio even though you set PCM

Downsampling to Off.

Wireless Automatic

Follow Steps 1 and 2 in Wired - Automatic,

and then follow these steps:

Wireless Manual

Configuring your Network

Connection

WPS(PBC)

WPS(PIN)

1. Select Network Status. The player

searches for a network, and then

pCM downsampling

Before you begin, contact your ISP to find

out if your IP address is static or dynamic. If it

is dynamic, and you have a wired or wireless

network, we recommend using the Automatic

configuration procedures described below.

When you configure the wireless network

connection, any wireless network devices

currently connected through the player

or, if applicable, the player's current wired

connection, will be disconnected.

Lets you choose to have 96KHz PCM signals

downsampled to 48KHz before they are outputted

to an amplifier. Choose On if your amplifier or

receiver is not compatible with a 96KHz signal.

displays the connection failed message.

2. On the bottom of the screen, select Ip

Settings, and then press the

button.

The IP Settings screen appears.

Download from Www.Somanuals.com. All Manuals Search And Download.

10.On the Security screen, enter your

network's Security Code or Pass

^ĞWireless - Automatic

^ĞWireless - Manual

^ĞWpS(pIN)

If you have a static IP address or the

Automatic procedure does not work, you'll

need to set the Network Settings values

manually.

Before you begin, open the router's setup

menu on your PC and access the screen

with the WPS PIN entry field.

1. In the Home screen, select Settings,

Phrase. Enter numbers directly using

the number buttons on your remote

control. Enter letters by selecting a

letter with the ▲▼◀▶ buttons, and

and then press the

button.

2. Select Network, and then press the

button.

1. In the Home screen, select Settings,

and then press the

2. Select Network, and then press the

button.

3. Select Network Settings, and then

1. Follow the directions in Wireless -

then pressing the

button.

Automatic through Step 5.

press the

button.

11.When finished, select done at the right

button.

4. Select Wireless in the Network Settings

screen, and then press the button.

2. The player searches for a network, and

then displays the connection failed

message.

of the screen, and then press the

button.

3. Select Network Settings, and then

press the

button.

The player searches for and then

displays a list of the available networks.

The player verifies the network

connection and then connects to the

network.

4. Select Wireless in the Network Settings

screen, and then press the button.

The player searches for and then

displays a list of the available networks.

5. Select the desired network, and then

3. On the bottom of the screen, select

Ip Settings, and then press the

button.

The IP Settings screen appears.

Network Settings

12.After the player verifies the network,

Select your network type.

Network type

Wireless network

Add Network

Wireless

select OK, and then press the

4. Select the IP Setting field, and then

button.

press the

6. Select the WpS(pIN), and then press the

button. The PIN pop-up appears.

▶

button.

you can connect your Blu-ray

player to the internet. please

select which wireless network

to use.

press the

button.

^ĞWpS(pBC)

1. In the Home screen, select Settings,

5. Select Enter manually in the IP Setting

field, and then press the button.

WpS(pBC)

7. Enter the PIN into the WPS PIN entry

field in the router's Set Up screen and

then save the the screen.

m Move " Select ' Return

6. Select a value to enter (Ip Address, for

example), and then press button.

and then press the button.

2. Select Network, and then press the

5. Select the desired network, and then

press the button.

Use the number keypad on your

NOTES

■

button.

✎

remote control to enter the numbers

for the value. Use the ◀▶ buttons

on the remote control to move from

entry field to entry field within a value.

When done with one value, press the

Contact the manufacturer of the

3. Select Network Settings, and then

6. On the Security screen, enter your

network's Security Code or Pass Phrase.

Enter numbers directly using the

number buttons on your remote

control. Enter letters by selecting a

letter with an arrow button, and then

router for instructions explaining

how to access the router's Set Up

screens or refer to the router's

user's manual.

press the

button.

4. Select Wireless in the Network Settings

screen, and then press the button.

button.

5. Press the ▲▼ button on your remote,

and then press the ◀▶ button to select

the WpS(pBC).

■

For WPS connection, set your

7. Press the ▲ or ▼ button to move to

another value, and then enter the

numbers for that value following the

instructions in Step 6.

wireless router’s security encryption

to AES. WPS does not support WEP

security encryption.

pressing

button.

7. When finished, select done and then

press the button. The player verifies

6. Press the

button on your remote.

The "Press the PBC button" message

appears.

8. Repeat Steps 6 and 7 until you have

the network connection and then

connects to the network.

Network Test

filled in all values.

7. Press the WPS(PBC) button on your

router within two minutes. Your player

automatically acquires all the network

settings values it needs and connects

to your network.

NOTES

✎

8. When verification is complete, select

Use this menu item to check whether your

network connection is working or not.

■

You can get the Network values

OK, and then press the

button.

from your Internet provider.

NOTES

■

✎

Network Status

9. When finished, and then press the

RETURN or ExIT buttons. The Security

Screen appears.

You should be able to find the

Security Code or Pass Phrase on one

of the set up screens you used to

set up your router or modem.

The Network Status screen appears.

The player connects to the network

after the network connection is verified.

Use to check whether a connection to a

network and the Internet has been established.

Download from Www.Somanuals.com. All Manuals Search And Download.

■

2. When you have completed the

When you are using the Screen

Mirroring function, video stuttering

or audio dropouts may occur,

depending on your environment.

NOTES

✎

Wi-Fi direct

procedure, you should see a pop-up on

your TV screen saying that a device that

supports Wi-Fi Direct has requested to

connect. Select OK, and then press the

■

The current wired or wireless network

connection will be disconnected when

you use the Wi-Fi Direct function.

The Wi-Fi Direct function allows you to

connect Wi-Fi Direct devices to the player

and each other using a peer-to-peer

network, without a wireless router.

■

Bluetooth transmissions can

Text files, such as files with a .TXT or

.DOC extension, do not display when

you are using the Wi-Fi Direct function.

button to accept.

interfere with the Screen Mirroring

signal. Before using the Screen

Mirroring function, we strongly

recommend that you turn off the

Bluetooth function on your smart

phone or smart device (tablet, etc.).

3. The Connecting pop-up appears, followed

by the Connected pop-up. When it closes,

you should see the device listed on the

Wi-Fi Direct screen as connected.

NOTES

✎

■

Some Wi-Fi Direct devices may not

Screen Mirroring

support the AllShare function if

connected via Wi-Fi Direct. If this is the

case, we recommend that you change

the network connection method you

used to connect the devices.

The Screen Mirroring function lets you

view the screen of your smart phone

or android tablet on the TV you have

connected to the Blu-ray player.

Through the player Using pBC

device Name

1. Select the Wi-Fi Direct device you want to

■

Bluetooth transmissions can interfere

connect to this player, and then press the

The Device Name function allows you to

change the player's name by selecting

from a device name list box.

with the Wi-Fi Direct signal. Before

you use the Wi-Fi Direct function, we

strongly recommend that you turn off

the Bluetooth function of any active

mobile device.

1. In the Home menu, press the ▲▼◀▶

button. The PBC/PIN pop up appears.

buttons to select Screen Mirroring, and

then press the

Mirroring pop-up appears.

2. Select pBC, and then press the

button. The Screen

button. The PBC pop-up appears.

3. Press the PBC button on the Wi-Fi

Bd-Live Internet Connection

2. Launch AllShare Cast on your device.

Direct device within 2 minutes.

3. On your device, find the name of the

Blu-ray player in the list of available

devices and then select it.

1. Turn on the Wi-Fi direct device and

activate its Wi-Fi Direct function.

2. In the Home screen, select Settings,

and then press the

3. Select Network, and then press the

Set to allow or prohibit an Internet

connection when you use the BD-LIVE

service.

4. The Connecting pop-up appears,

followed by the Connected pop-up.

When it closes, you should see the

device listed on the Wi-Fi Direct screen

as connected.

4. The TV will display a PIN. Enter the PIN

button.

●

Allow (All) : The Internet connection is

allowed for all BD-LIVE contents.

into your device.

5. The TV displays a connecting

message (for example, Connecting to

Android_92gb...) and then displays the

connected message.

button.

●

Allow (Valid Only) : The Internet

connection is allowed only for BD-LIVE

contents containing a valid certificate.

4. Select Wi-Fi direct, and then press the

button.

Through the player Using a pIN

The Wi-Fi Direct devices that you can

connect to appear.

1. Select the Wi-Fi Direct device you want

●

6. In a few moments, the screen of your

prohibit : No Internet connection is

allowed for any BD-LIVE content.

to connect to this player, and then

device appears on the TV screen.

5. You have three ways to complete the

press the

button. The PBC/PIN pop

7. To stop Screen Mirroring, press the

ExIT or RETURN button on the remote

control, or shut off the Screen Mirroring

function on your smart phone.

Wi-Fi connection:

up appears.

NOTES

■

✎

●

Through the Wi-Fi device.

2. Select pIN, and then press the

What is a valid certificate?

button. The PIN pop-up appears.

●

Through the player using PBC.

When the player uses BD-LIVE to

send the disc data and a request

to the server to certify the disc, the

server uses the transmitted data to

check if the disc is valid and sends

the certificate back to the player.

3. Note the PIN code in the pop-up, and

then enter it into the appropriate field

in the Wi-Fi Direct device you want to

connect.

4. The Connecting pop-up appears,

followed by the Connected pop-up.

When it closes, you should see the

device listed on the Wi-Fi Direct screen

as connected.

●

Through the player using a PIN.

NOTES

✎

Each is covered below.

■

You can connect to a device that

supports AllShare Cast. Note that

connecting to such a device may not

be fully supported depending on the

manufacturer. For further information

on mobile connection support, refer

to the manufacturer’s web site.

Through the Wi-Fi device

1. On the Wi-Fi device, follow the

procedure on the device for connecting

to another Wi-Fi Direct device. See the

device's user manual for instructions.

■

The Internet connection may be

restricted while you are using BD-

LIVE contents.

Download from Www.Somanuals.com. All Manuals Search And Download.

■

3. On the next screen, click See All

The total memory available to BD

Data Management may differ,

depending on the conditions.

NOTES

Using Bd-LIVE™

✎

Downloads under Downloads.

■

This function is not available if the HDMI

cable does not support CEC.

Once the player is connected to the network,

you can enjoy various movie-related service

contents using a BD-LIVE compliant disc.

4. Click Software on the next page.

If your Samsung TV has an Anynet+ logo,

then it supports the Anynet+ function.

Depending on your TV, certain HDMI

output resolutions may not work.

Please refer to the user manual of

your TV.

If you have Anynet+ turned on, when

you turn off the product, disconnect,

and then reconnect the power cable,

the product turns on automatically to

re-establish the Anynet+ connection.

After about 15 seconds, it turns off

again automatically.

5. Click the icon in the DLNA S/W line under

Language Settings

Download File to start the download.

1. Attach a USB memory stick to the USB

jack on the front of the player, and

then check its remaining memory. The

memory device must have at least 1GB

of free space to accommodate the BD-

LIVE services.

For instructions explaining how to play

content located on your PC, see page 19.

You can select the language you prefer for

the On-Screen menu, disc menu, audio,

and subtitles.

■

NOTES

■

System Settings

✎

2. Insert a Blu-ray Disc that supports BD-

The selected language will only

appear if it is supported on the disc.

LIVE.

Initial Settings

3. Select an item from various BD-LIVE

service contents provided by the disc

manufacturer.

By using the Initial Settings function, you

can set the language, Network Settings, etc.

For more information about the Initial

Settings function, refer to the Initial Settings

section of this user manual (See page 10).

■

Some Samsung TVs, when connected

to this product using the Anynet+

function will, when you turn them

on, display a warning popup

Security Settings

NOTES

✎

When you access this function for the first

time, the PIN screen appears. Enter the default

PIN - 0000 - using the number buttons. To

change the PIN, use the Change PIN function

(See page 17). Each time you access the

Security Settings hereafter, you must enter

that four digit PIN. If you don’t change the

■

The way you use BD-LIVE and

message saying no connection has

been found. Never-the-less, the

Anynet+ connection is properly

established and available to use.

the provided contents may differ,

depending on the disc manufacturer.

Quick Start

The AllShare Function

When set to On, Quick Start lets the player

start up more quickly be decreasing the

boot time.

Bd data Management

PIN, continue using the default PIN

AllShare lets you play music, video, and

photo files located in your PC or NAS

(Network-attached Storage) on the player.

Enables you to manage the downloaded

contents you accessed through a Blu-ray

disc that supports the BD-LIVE service and

stored on a flash drive.

You can check the device’s information

including the storage size, delete the BD

data, or change the Flash memory device.

Bd parental Rating

NOTES

✎

To use AllShare with your player, you must

connect the player to your network.

(See pages 13~16).

To use AllShare with your PC, you must install

AllShare (DLNA) software on your PC.

Prevents playback of Blu-ray Discs with specific

age ratings unless the 4 digit PIN is entered.

■

If this function is set to On, Standby

power consumption will be increased.

dVd parental Rating

Anynet+ (HdMI-CEC)

This function works in conjunction with DVDs

that have been assigned an age rating or

numeric rating that indicates the maturity level

of the content. These numbers help you control

the types of DVDs that your family can watch.

Select the rating level you want to set.

For example, if you select Level 6, discs

rated above 6 - Level 7 and 8 - will not play.

NOTES

Anynet+ is a convenient function that offers

linked operations with other Samsung

products that have the Anynet+ feature.

To operate this function, connect this

player to an Anynet+ Samsung TV with an

HDMI cable.

With Anynet+ on, you can operate this player

using a Samsung TV remote control and start

disc playback simply by pressing the pLAy

✎

If you have NAS, you can use AllShare

without any additional software.

■

In the external memory mode, disc

playback may be stopped if you

disconnect the USB device in the

middle of playback.

To download AllShare

(dLNA)software

■

Your player supports the FAT16,

1. Go to Samsung.com

FAT32, and NTFS file systems. We

recommend you use USB devices that

support the USB 2.0 protocol with 4

2. Click Get Support > Find Product Support,

enter your player’s product number in the

Search field, and then click the product

number in the drop down.

A larger number indicates more mature content.

MB/sec or faster read/write speed

The Resume Play function may not work

after you format the storage device.

(

) button on the TV’s remote control.

When the DVD Parental Rating function is

on, you must enter the 4 digit PIN to play

discs with restricted rating levels.

For more information, please see the TV

user manual.

■

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Use the ▲▼ buttons to select On, and

then press the button.

Support Settings

Software Upgrade

By USB

Change pIN

To upgrade by USB, follow these steps:

Change the 4-digit password used to

access security functions.

If there is a new software version available,

the player notifies you with a popup message.

1. Visit www.samsung.com/bluraysupport.

2. Download the latest USB software

To change the PIN, follow these steps:

The Software Upgrade menu allows you to

upgrade the player’s software for performance

improvements or additional services.

1. To upgrade the firmware, remove any

upgrade zip archive to your computer.

discs from the player.

1. Select Change PIN, and then press the

3. Unzip the zip archive to your computer.

You should have a single RUF file with

the same name as the zip file.

2. Select yes in the Pop-up. The player

turns off automatically, then restarts,

and begins the download. (Never turn

the player on or off manually during an

upgrade.)

button. The Enter old PIN screen

appears.

By Online

2. Enter the old PIN. If you never changed

the PIN, enter the default PIN: 0000.

The Enter new PIN screen appears.

4. Copy the RUF file to a USB flash drive.

To upgrade By Online, follow these steps:

5. Make sure there is no disc in the player,

and then insert the USB flash drive into

the USB port of the player.

6. In the player’s menu, go to Settings >

Support > Software Upgrade.

7. Select By USB.

1. Remove any discs from the player.

3. The update progress popup appears.

3. Enter the new PIN in the Enter new PIN

2. In the player’s menu, go to Settings >

fields.

4. When the update is complete, the

Support > Software Upgrade.

player will restart automatically.

4. Re-enter the new PIN in the Confirm

new PIN fields. The "PIN is changed

successfully." message appears.

3. Select By Online, and then press the

NOTES

■

✎

button. The Connecting to Server

The upgrade is complete when the

NOTES

message appears.

✎

5. Press the

button.

player turns off, and then turns on

again by itself.

■

No disc should be in the product

4. A popup message will appear if an

when you upgrade the software

using the USB Host jack.

If you forget your password

update is available.

■

Never turn the player off or on

5. If a download is available, select yes.

The download and upgrade process

starts. (Important: Never turn the player

off or on manually during an upgrade.)

manually during the update process.

■

When the software upgrade is

1. Remove any discs.

■

done, check the software details in

the software Upgrade menu.

Samsung Electronics takes no legal

2. Press and hold the button on the

responsibility for player malfunction

caused by an unstable Internet

connection or consumer negligence

during software upgrade.

front panel for 5 seconds or more.

All settings will revert to their factory

settings.

■

Do not turn off the player during the

software upgrade. It may cause the

player to malfunction.

Software upgrades using the USB

Host jack must be performed with a

USB flash memory stick only.

6. When the update is complete, the

player will restart automatically.

NOTES

■

✎

NOTES

■

✎

Contact Samsung

When the factory default settings

The upgrade is complete when the

are restored, all the user stored BD

data is deleted.

player turns off, and then turns on

again by itself.

Provides contact information for assistance

with your player.

Auto Upgrade Notification

■

Never turn the player off or back on

If you have connected the player to your

network, and then set Auto Upgrade

Notification on, the player automatically

notifies you when a new software version

is available for the player.

General Settings

manually during the update process.

■

Samsung Electronics takes no legal

Lets you view the general disclaimer

regarding third party contents and services.

Time Zone

responsibility for player malfunction

caused by an unstable Internet

connection or consumer negligence

during a software upgrade.

Lets you specify the time zone that is

applicable to your area.

Reset

To set Auto Upgrade Notification on,

follow these steps:

Returns all settings to their factory defaults

except for the network settings.

■

No disc should be in the product

1. Select Auto Upgrade Notification, and

when you upgrade the software By

Online.

then press the

button.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing a Disc with User Recorded

Content

play disc

photos

Videos

Music

Change device

Media Play

Playing a Commercially Recorded

Disc

No disc

123

You can play multimedia files you have

recorded on Blu-ray, DVD, or CD discs.

3. Use the ▲▼ buttons to select photos,

Empty disc tray

Videos, or Music, and then press the

button. The Photos, Videos & Music

1. Place a user recorded disc into the disc

tray with the disc’s label facing up, and

then close the tray.

Screen Mirroring Change device

screen appears listing the content of

the device. Depending on how the

contents is arranged, you will see either

folders, individual files, or both.

App

Settings

1. Press the

button to open the disc

tray.

2. Use the ◀▶ buttons to select the type

of content you want to view or play

- Videos, photos, or Music - and then

3. Use the ▲▼◀▶ buttons to select

photos, Videos, or Music on the

Home screen, and then press the

2. Place a disc gently into the disc tray

with the disc's label facing up.

NOTES

✎

3. Press the

button to close the disc

press the

button.

button. The Photos, Videos & Music

screen appears listing the content of

the device. Depending on how the

contents is arranged, you will see either

folders, individual files, or both.

■

Even though the player will display

tray. Playback starts automatically.

folders for all content types, it will only

display files of the Content Type you

selected in Step 3. For example, if you

selected music, you will only be able

to see music files. You can change this

selection by returning to the Photos,

Videos & Music screen and going to

Step 3 in Method 2 below.

NOTES

✎

■

Even though the player will display

folders for all content types, it will

only display files of the Content

Type you selected in Step 2. For

example, if you selected music, you

will only be able to see music files.

You can change this selection by

returning to the Home screen and

repeating Step 2.

Playing Files on a USB Device

NOTES

✎

There are two methods you can use to

play or view multimedia files located on a

USB device.

■

Even though the player will display

folders for all content types, it will

only display files of the Content

Type you selected in Step 3. For

example, if you selected music, you

will only be able to see music files.

You can change this selection by

returning to the Photos, Videos &

Music screen and repeating Step 3.

Method 1

4. If necessary, use the ▲▼◀▶ buttons

to select a folder, and then press the

1. Turn the player on.

button.

3. A screen appears listing the contents

of the disc. Depending on how the

contents are arranged, you will see

either folders, individual files, or both.

5. Select a file to view or play, and then

press the button.

2. Connect the USB device to the USB

port on the front panel of the player.

The New Device Connected pop-up

appears.

6. Press the RETURN button to exit a

folder or the ExIT button to return to

the Home screen.

7. Go to pages 19~21 for instructions

that explain how to control playback of

videos, music, and pictures on a USB

device.

4. If necessary, use the ▲▼◀▶ buttons

to select a folder, and then press the

button.

play disc

photos

Videos

Music

button.

5. Use the ▲▼◀▶ buttons to select a file

New device connected.

to view or play, and then press the

button.

6. Press the RETURN button to exit a folder or

5. Use the ▲▼◀▶ buttons to select a file

123

photos

to view or play, and then press the

button.

Videos

Empty disc tray

Music

Method 2

the ExIT button to return to Home screen.

6. Press the RETURN button one or more

times to exit a current screen, exit a

folder, or to return to the Home screen.

Press the ExIT button to return directly

to the Home Screen.

Move

Enter

Return

7. Go to pages 19~21 for instructions that

explain how to control playback of videos,

music, and pictures on a USB device.

App

Screen Mirroring Change device

Settings

1. Turn the player on.

2. Connect the USB device to the USB

port on the front panel of the player.

Select Change device and then press

the ▲▼ button to select USB. Press the

NOTES

✎

7. Go to pages 19~21 for instructions

that explain how to control playback of

videos, music, and pictures on a disc.

■

If you insert a disc when playing

If the pop-up does not appear, go to

Method 2.

a USB device, the device mode

changes to "Disc" automatically.

button.

Download from Www.Somanuals.com. All Manuals Search And Download.

5. A screen appears listing the contents

of the disc. Depending on how the

contents are arranged, you will see

either folders, individual files, or both.

playback related buttons

Playing Content Located on Your

PC or AllShare Device through the

Blu-ray Disc Player

Controlling Music Playback

The player does not play sound in Search,

Slow, or Step mode.

You can control the playback of music

located on a Blu-ray disc, DVD, CD, USB

device, or your computer.

●

To return to normal speed playback,

6. If necessary, use the ▲▼◀▶ buttons

press the

button.

Blu-ray disc player

to select a folder, and then press the

button.

Buttons on the Remote Control

used for Music playback

button

Starts playback.

7. Use the ▲▼◀▶ buttons to select a file

play back pC's

files

Stops playback.

to view or play, and then press the

button.

Pauses playback.

AllShare Connection

8. Press the RETURN button one or more

times to exit a current screen, exit a

folder, or to return to the Home screen.

Press the ExIT button to return directly

to the Home Screen.

During playback, press the

button.

Fast Motion

play

1. Connect the Blu-ray Disc Player, your

PC, and/or your AllShare compatible

device to the same wireless network.

Each time you press the

button, the playback

speed will change.

9. Go to pages 19~21 for instructions

that explain how to control playback of

videos, music, and pictures on a disc.

2. Follow the directions in the AllShare

software Installation/Instruction

manual to set up devices and files for

playing or viewing.

In pause mode, press the

Slow Motion

play

button. Each time you

press the

button, the

playback speed will change.

In pause mode, press the

3. Select Change device on the player's

Controlling Video Playback

NUMBER buttons (Audio Cd (Cd-

dA) only) : During Playlist playback,

press the desired track number.

The selected track is played.

button.

Home screen, and then press the

Step Motion

play

Each time you press the

button. In the list of AllShare

You can control the playback of video

content located on a Blu-ray disc, DVD,

CD, USB device, or your computer.

Depending on the media, some of the

functions described in this manual may not

be available.

button, a new frame

connected devices that appears, select

your PC or other AllShare compatible

appears.

During playback, press

device, and then press the

button.

Skip : During playback, press the

the

button.

4. Use the ◀▶ buttons to select the type

of content you want to view or play

- Videos, photos, or Music - and then

button to move to the

Skip Motion

play

Each time you press the

or button, the disc

previous or next file of the playlist.

During Blu-ray or DVD disc playback, the

Full screen button does not operate.

moves to the previous or

next chapter or file.

button : Stops a track.

press the

button.

Fast play (Audio Cd (Cd-dA) only)

NOTES

✎

Buttons on the Remote Control

used for Video playback

Using the disc menu, title menu,

popup menu, and title list

During playback, press the

■

Even though the player will display

folders for all content types, it will

only display files of the Content

Type you selected in Step 4. For

example, if you selected music, you

will only be able to see music files.

You can change this selection by

returning to the Home screen and

repeating Step 4.

button.

Each time you press the

dISC MENU During playback, press this

button, the playback speed will

change.

button

button to display the Disc menu.

TITLE MENU During playback, press this

button to display the Title menu.

pause : Pauses a track.

button

button : Plays the currently

pOpUp MENU During playback, press this button

to display the Pop-up menu.

selected track.

button

Download from Www.Somanuals.com. All Manuals Search And Download.

NOTES

■

✎

Repeat an Audio Cd (Cd-dA)/

playlist

Ripping

This function may not be supported

by some discs.

On the Ripping screen, you can also

choose Select All and deselect All.

Mp3

1. To move to the Music List, press the

or RETURN button.

Lets you copy audio files from a data disc

to a USB/HDD device.

■

1. During Playlist playback, press the

The Music List screen appears.

TOOLS button.

1. Open the disc tray. Place the audio

(CDDA) disc on the tray, and close the

tray. Insert a USB device into the USB

jack on the front of the product.

Use Select All to select all tracks.

This cancels your individual track

selections.

1/2 page

Music ^{TRACK 001}

playlist

1/6

Tools

TRACK 001

TRACK 002

Repeat Mode

Off

05:57

02:38

TRACK 002

Rip

TRACK 003

02:38

TRACK 004

02:38

04:27

Use deselect All to deselect all

selected tracks at once.

Move

Adjust

Return

TRACK 003

TRACK 004

TRACK 005

TRACK 006

2. In Stop mode, press the ▲▼◀▶

buttons to move to a desired track, and

then press the yELLOW (C) button. A

check appears on the track.

TRACK 005

02:38

TRACK 006

02:38

04:07

03:41

03:17

TRACK 007

02:38

TRACK 008

02:38

00:08 / 05:57

TRACK 009

02:38

TRACK 010

02:38

disc Copy to USB

03:35

Select

Tools

(

)

Jump page

Return

Change device

pause c Select

Tools

Return

Repeat this procedure to select

additional tracks.

Lets you copy video/photo/music contents

from a data disc to a USB/HDD device.

2. Press the ▲▼◀▶ buttons to move

3. To remove a track from the list, move

to the track, and then press the

yELLOW (C) button again.

2. Press the ◀▶ buttons to select Track,

1. Open the disc tray. Place the data disc

on the tray, and close the tray. Insert

a USB device into the USB jack on the

front of the product. The new device

pop-up appears.

to a desired track, and then press the

yELLOW (C) button. A check appears

on the track.

Repeat this procedure to select

additional tracks.

All, Shuffle, or Off.

3. Press the

button.

The check on the track is cancelled.

4. When done, press the TOOLS button

Songs are played in the

order in which they

were recorded.

and then select Rip using the ▲▼

3. To remove a track from the list, move

to the track, and then press the

yELLOW (C) button again.

Off

2. Press the ▲ button, and then press the

buttons, and then press the

◀▶ to select Blu-ray, DVD or CD.

button. The Rip pop-up appears.

The current song is

repeated.

3. Use the ▲▼ buttons to select photos,

The check on the track is cancelled.

5. Use the ▲▼ buttons to select the

(

)Track

Videos, or Music, and then press

4. When done, press the

button.

device to store the ripped files to, and

the

button. The Photos, Videos

The tracks you selected are displayed

on the right side of the screen. The

player plays the first track.

then press the

button.

)All

All songs are repeated.

& Music screen appears listing the

content of the device. Depending on

how the contents is arranged, you will

see either folders, individual files, or

both.

NOTES

■

✎

Shuffle plays songs in

random order.

) Shuffle

Do not disconnect the device while

ripping is in progress.

5. To change the play list, press the

button or RETURN button to return to

the Music List. Repeat Steps 2, 3, and 4.

6. To cancel the play list and return to

the Home screen, press the RETURN or

ExIT button.

6. If you want to cancel ripping, press the

button and then select yes. Select

NOTES

✎

No to continue ripping.

■

Even though the player will display

7. When ripping is complete, the "Ripping

folders for all content types, it will

only display files of the Content

Type you selected in Step 3. For

example, if you selected music, you

will only be able to see music files.

You can change this selection by

returning to the Photos, Videos &

Music screen and repeating Step 3.

NOTES

■

is completed." message appears.

✎

Press the

button to go back to the

You can create a playlist with up to

Playback screen.

99 tracks on Audio CDs (CD-DA).

■

If you remove all the tracks from

a play list and then press the

button, the player lists and plays all

the tracks on the disc.

Download from Www.Somanuals.com. All Manuals Search And Download.

4. With the Playback screen displayed,

Use the ▲▼◀▶ buttons to select a file

you want to copy, and then press the

yELLOW (C) button. A check appears

to the left of the file.

7. After you have entered your password,

Playing Photo Contents

Using Netflix

select Continue at the bottom of the

screen, and then press the

button.

You can control the playback of photo

content located on a Blu-ray disc, DVD,

CD, USB device, or your computer.

You can use your Blu-ray player to stream

movies, TV shows, and other video content

from Netflix. To stream content from

Netflix, you must connect your Blu-ray

player to your network. (See page 9.)

8. If the E-mail and Password are correct,

the Blu-ray player will log onto Netflix

and present a choice of regular Netflix

(a red rectangle) or Just for Kids. Select

5. Repeat Step 4 to select and check

Using the Tools Menu

additional files.

6. To remove a file from the list, move to

the file, and then press the yELLOW (C)

button again.

either, and then press the

button.

During playback, press the TOOLS button.

Starting Netflix for the First Time

For instructions about selecting a movie

or video to watch, go to Selecting a

Movie or Video.

Start Slide Show/ Select to start or stop the

Stop Slide Show slide show.

1. On the Home screen, select Netflix and

The check on the file is removed.

then press the

button.

7. When done, press the TOOLS button.

9. If you selected Start Your Free Trial,

Slide Show

Speed

Select to set a slide show's

speed.

Select the Copy to USB using the ▲▼

select the First Name field, and then

NOTES

■

✎

buttons, and then press the

The Copy to USB pop-up appears.

button.

press the

button.

If this is the first time you start

any of the apps at the bottom of

the screen (Netflix, Pandora, or

YouTube), you will be asked to read

and agree to the Terms of Service

Agreement and the Samsung

Background Select to listen to music

10.Enter your first name by selecting

character, number, or symbol keys on

the screen using the ▲▼◀▶ buttons,

8. Use the ▲▼ buttons to select the

Music

while viewing a slide show.

device to store the copied files on, and

Select to enlarge the

current picture. (Enlarge

up to 4 times)

then press the

button.

and then pressing the

button.

Zoom

NOTES

■

✎

11.When done, move the cursor to Enter

Service Privacy Policy. You must

agree to both to continue. After you

have agreed to both, go to Step 2.

Do not disconnect the device while

copying is in progress.

at the bottom of the screen, and then

Select to rotate the picture.

(This will rotate the picture

either clockwise or counter

clockwise.)

press the

button.

Rotate

9. If you want to cancel copying, press

the button and then select yes.

12.Repeat the same process for the all the

fields displayed (Last Name, E-mail,

etc.).

2. If you already have a Netflix account,

select Member Sign In, and then press

Select No to continue copying.

Shows the picture

information.

the

button. Go to Step 3.

10.When copying is complete, the

13.After you have entered your password

confirmation, select Continue at the

bottom of the screen, and then press

Information

NOTES

If you do not have a Netflix account,

select Start your Free Trial, and then

press the

"Copying is completed." message

appears. Press the

button to go

✎

button. Go to Step 9.

back to the Playback screen.

the

button.

■

Depending on the disc or storage

device, the Tools menu may differ.

3. Select the E-mail field, and then press

the button.

14.On the Your Payment Information

page, fill in the fields in the same

manner as the previous page.

NOTES

✎

■

This function may not be supported

by some discs.

On the Copying screen, you can also

■

To enable the background music

function, the photo file must be

in the same storage media as the

music file.

However, the sound quality can be

affected by the bit rate of the MP3

file, the size of the photo, and the

encoding method.

4. Enter your e-mail address by selecting

character, number, or symbol keys on

the screen using the ▲▼◀▶ buttons,

NOTES

■

✎

choose Select All and deselect All.

and then pressing the

button.

The only exception is the Expiration

Use Select All to select all item.

This cancels your individual item

selections.

Date field where you select the

Expiration month and year.

5. When done, move the cursor to Enter

at the bottom of the screen, and then

press the

button.

15.After you have entered all the required

Use deselect All to deselect all

selected item at once.

information, select the I agree check

6. Repeat the same process for the

■

You can't enlarge the subtitle and

PG graphic in the full screen mode.

box, and then press the

button.

Password field.

Download from Www.Somanuals.com. All Manuals Search And Download.

16.Select Start Membership, and then

press the button. The Blu-ray player

5. To move to the list of matches, press

3. If you have a Pandora account already,

Using You Tube

the ▶ button one or more times.

select yes in the pop-up that appears,

logs onto Netflix and presents a choice

of regular Netflix (a red rectangle) or

Just for Kids. Select either, and then

press the

Step 4.

button, and then go to

You can use your Blu-ray player to stream

video content from You Tube. To stream

content from You Tube, you must connect

your Blu-ray player to your network. (See

page 9.)

6. To select a movie or video, highlight it

and then press the

button.

If you do not have a Pandora account,

select No in the pop-up that appears,

and then press the

the activation code that appears, and

then go to Step 9.

press the

button.

NOTES

■

✎

button. Record

Select Clear at the top of the screen

to clear all entered characters.

NOTES

✎

■

Starting you Tube for the First

Time

To return to the previous page, press

■

Select the Delete button (with an

X) at the top of the screen to delete

the last character you entered.

the Return button on your remote.

4. Enter your e-mail address. Use the

■

To exit Just for Kids, select Exit Just

▲▼◀▶ buttons to select a character,

and then press the

for Kids at the top of the Just for

1. On the Home screen, select You Tube,

button.

Just for Kids does not have a Search

function.

Kids page, and then press the

button.

and then press the

button.

5. Repeat Step 4 to enter all the

characters in your e-mail address.

NOTES

■

✎

■

To exit Netflix, press the Exit button

6. When done, select Enter at the bottom

If this is the first time you start

any of the apps at the bottom of

the screen (Netflix, Pandora, or

YouTube), you will be asked to read

and agree to the Terms of Service

Agreement and the Samsung

on your remote.

Using Pandora

of the screen, and then press the

button.

Selecting a Movie or Video

You can use your Blu-ray player to stream

music from Pandora, free of charge. To

stream music from Pandora, you must

connect your Blu-ray player to your

network. (See page 9.)

7. Repeat Steps 4 and 5 to enter your

Password.

Movies and videos on Netflix are displayed

in rows by category. To scroll through a

row, use the ◀▶ buttons. To move up or

down, from one row to another, use the

▲▼ buttons. To select a movie or video,

8. When done, select Enter at the bottom

Service Privacy Policy. You must

agree to both to continue. After you

have agreed to both, go to Step 2.

of the screen, and then press the

button. The Blu-ray player launches

Pandora. Activation is complete. Stop

here.

Starting pandora for the First

Time

highlight it, and then press the

button.

2. On the You Tube screen, use the ▲▼

buttons, to select discover Channels,

Search, My you Tube, or Featured, and

You can also search for movies and videos

by keywords - title, director’s name, actor’s

name, etc.

9. Visit www.pandora.com/Samsung on

your computer.

1. On the Home screen, select Pandora,

then press the

button.

and then press the

button.

10.Enter the activation code you recorded

in Step 3 into the appropriate fields on

the Pandora web page.

To search, follow these steps:

discover Channels lets you see the

channels that are available and lets you

select a channel.

NOTES

■

✎

1. Select the Search field at the top of the

If this is the first time you start any of

the apps at the bottom of the screen

(Netflix, Pandora, or YouTube), you

movie/video list screen, and then press

11.Follow the instructions on the Pandora

the

button.

Search lets you search for videos using

key words or names.

web pages to create a new account.

2. Using the ▲▼◀▶ buttons, select a letter

or number, and then press the button.

will be asked to read and agree to the 12.When done, return to the Activation

My you Tube lets you access your You

Tube account and send videos from

your tablet or smart phone to your TV.

Samsung Service Privacy Policy. You

must agree to both to continue. After

you have agreed to both, go to Step 2.

Code screen, select Continue, and

then press the

launches.

The character you selected appears at the

top of the field on the right.

button. Pandora

3. Repeat Step 2 to select more letters or

Featured displays the currently featured

videos by category and lets you select a

category.

numbers.

2. On the Pandora welcome screen, select

4. As you add more letters, Netflix will

start to display matches in the field on

the right.

Activate Pandora, and then press the

button.

Download from Www.Somanuals.com. All Manuals Search And Download.

NOTES

■

✎

playing and Controlling Videos

Current play List Videos

Select Clear at the top of the screen

1. To begin, select either discover

1. With a video running and the Control

Panel displayed, press the ▼ button

once. The Information screen appears.

to clear all entered characters.

Channels or Featured, and then press

■

Select the Delete button (with an

at the top of the screen to delete

the last character you entered.

)

the

button.

2. Use the ◀▶ buttons to select a

2. In the Information screen, press the

▼ button once. The Related Videos

category appears displaying individual