USER’S MANUAL
Split - type Air Conditioner
(Cooling and Heating)
E S F
DB98-29386A(1)
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
You should take the following safety precautions when using your air conditioner.
• If you don’t follow the safety precautions, you may get the risk of an
electric shock, injury or death.
WARNING
•
The manufacturer or qualified service personnel must install this air conditioner.
• Unplug the electric power before repairing, installing or cleaning.
D o not repair the air conditioner at your discretion.
DURING OPERATION
It is recommended to contact a service center directly.
N ever spill any kind of liquid on the air conditioner.
If this happens, unplug or turn off the air conditioner and contact an
authorized service center.
Do not insert anything between the airflow blades to prevent damage
of the inner fan and consequent injury. Keep children away from the
air conditioner.
D o not place any obstacles in front of the air conditioner.
Do not spray any kind of liquid into the indoor unit. If this happens,
turn off the breaker and contact a service center.
M ake sure that the air conditioner is well ventilated at all times:
Do not place a cloth or other materials over it.
R emove the batteries if you don’t use the remote control for a long
time. (If applicable)
U se the remote control within 7 meters from the indoor unit.
(If applicable)
Before throwing out the air conditioner, remove the batteries from the
DISPOSING OF THE UNIT
remote control.
When you dispose of the air conditioner, consult your dealer. If pipes
are removed incorrectly, refrigerant may blow out and cause air
pollution. When it contacts with your skin, it can cause skin injury.
T he package of the air conditioner should be recycled or disposed
properly for environmental reasons.
OTHERS
prevent the damage of the compressor.
they use the air conditioner.
E-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
PREPARATION
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Name of Each Part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Remote Control-Buttons and Display . . . . . . . . . . . . . . . . . . . . . . . . . 6
Inserting the Remote Control Batteries . . . . . . . . . . . . . . . . . . . . . . . . 7
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
OPERATION
Selecting the Auto Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Selecting the Cool Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Selecting the Heat Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Selecting the Dry Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Selecting the Fan Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Selecting the Turbo Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Selecting the Energy Saving Function . . . . . . . . . . . . . . . . . . . . . . . . 15
Adjusting the Airflow Direction Vertically . . . . . . . . . . . . . . . . . . . . . 16
Adjusting the Airflow Direction Horizontally . . . . . . . . . . . . . . . . . . 17
Setting the On Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Setting the Off Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Setting the Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Setting the 1 Hour Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
RECOMMENDATIONS FOR USE
Operating Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Temperature and Humidity Ranges . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Operating Your Air Conditioner Without the Remote Control . . . . 23
Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Cleaning Your Air Conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Cleaning Deodorizing and Bio Filter (Option) . . . . . . . . . . . . . . . . . 26
E-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Name of Each Part
The design and shape can be changed according to the model.
Indoor Unit
Temperature sensor
Power(On/Off) button
Air filter
(under the grille)
Airflow blades
(outlet)
Air Inlet
Turbo indicator
Timer indicator
Operation indicator
(Cool/Heat mode)
Fan mode indicator
Power(On/Off) button/
Remote Control Sensor
Energy saving indicator
E-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Outdoor Unit
Air Inlet (Rear)
Air Outlet
Connection Valve
E-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control-Buttons and Display
Transmission indicator
Temperature and Timer setting
Battery life indicator
1 Hour Timer indicator
On Timer indicator
Off Timer indicator
Operation modes indicator
(
AUTO, COOL, DRY,
FAN, HEAT)
Turbo function indicator
Sleep mode indicator
Energy saving indicator
Airflow direction
Fan speed indicator
Turbo button
Power(On/Off) button
1 Hour Timer button
Mode selection button
(AUTO, COOL, DRY, FAN, HEAT)
Temperature adjustment button
Energy Saving button
Fan speed button
Airflow control button
Timer Set/Cancel button
Battery check button
Sleep button
On Timer button
Off Timer button
Note
Each mode indicator shows the current setting and the battery life.
You can check the battery life by pressing the button.
The number of the battery life indicator means the remaining battery life.
Replace the batteries when only one battery life indicator remains.
E-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting the Remote Control Batteries
You must insert or replace the remote control batteries when:
You purchase the air conditioner
The remote control does not work correctly
Note Use two AAA, LR03 1.5V batteries
Do not use old batteries or different kinds of batteries together.
B atteries may be completely discharged after 12 months, even if they
have not actually been used.
1
2
3
Remove the battery cover in the rear of the remote control by pushing
it with your thumb.
Insert two batteries, respecting the polarities as indicated by
the + and - symbols.
Close the cover by sliding it back in its place.
E-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Start
The User’s Manual provides you with valuable information about your
air conditioner. Please read this manual carefully before using the air conditioner.
It will help you take full advantage of the unit’s features.
You have already seen the basic description of the unit on pages from 4 to 6.
Starting up with the next page, you will find a series of step-by-step procedures for
each function available.
The illustrations in the step-by-step procedures use three different symbols:
PRESS
PUSH
HOLD DOWN
E-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Auto Mode
You can select the Auto mode if you want to cool or heat your room
automatically. You can adjust the temperature in this mode.
If necessary, press the
(On/Off) button.
1
Result: The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode you selected last.
The indoor unit beeps.
2
Press the
button on the remote control until
is displayed.
Result: The indoor unit beeps each time you press the
button.
The air conditioner runs in the Auto mode.
The Auto mode cools or heats the room depending on the
set temperature.
T he air conditioner changes the Cool or Heat mode
automatically depending on the current temperature during
operation.
Note
You can change modes at any time.
Press the
temperature is displayed.
button to adjust the temperature until the required
3
You can set the temperature between 61°F(16°C) and 86°F(30°C).
Result: Each time you press the
- The temperature is adjusted by 1°F
- The indoor unit beeps
button:
E-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Cool Mode
You can select the Cool mode if you want to cool your room.
You can adjust the temperature and the fan speed when cooling
If necessary, press the
(On/Off) button.
1
Result: The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode you selected last.
The indoor unit beeps.
2
Press the
button on the remote control until
is displayed.
Result: The indoor unit beeps each time you press the
button.
The air conditioner runs in the Cool mode.
Note
You can change modes at any time.
Press the
temperature is displayed.
button to adjust the temperature until the required
3
You can set the temperature between 61°F(16°C) and 86°F(30°C).
Result: Each time you press the
- The temperature is adjusted by 1°F
- The indoor unit beeps
button:
If the room temperature is higher than the selected
temperature, the air conditioner starts cooling.
If the room temperature reaches the set temperature, the
air conditioner stops cooling, but the fan operates consistently.
Press the
displayed.
button to select the fan speed until the required settingis
4
Automatic (rotated :
Low
)
Medium
High
Maximum
Result: Each time you press the
button, the indoor unit beeps.
The fan speed indicator increases and decreases
continuously and turns round each time you press the
button.
To control the airflow direction, refer to pages 16 and 17.
5
E-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Heat Mode
You can select the Heat mode if you want to heat your room.
You can adjust the temperature and the fan speed when heating.
If necessary, press the
(On/Off) button.
1
Result: The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode you selected last.
The indoor unit beeps.
2
Press the
button on the remote control until
is displayed.
Result: The indoor unit beeps each time you press the
button.
The air conditioner runs in the Heat mode.
Note
You can change modes at any time.
Press the
temperature is displayed.
button to adjust the temperature until the required
3
You can set the temperature between 61°F(16°C) and 86°F(30°C).
Result:
E
ach time you press the
button:
- The temperature is adjusted by 1°F
- The indoor unit beeps
I
f the room temperature reaches 9°F higher than the set
temperature, the air conditioner stops heating, but the fan
operates consistently.
If the room temperature reaches 5°F lower than the set
temperature, the air conditioner starts heating again.
Press the
displayed.
button to select the fan speed until the required settingis
4
Automatic (rotated :
Low
)
Medium
High
Maximum
Result: Each time you press the
button, the indoor unit beeps.
or the first 3~5 minutes, the fan may not operate to prevent
F
the cool air from running out of the indoor unit.
It helps to warm the air in your room sufficiently.
To control the airflow direction, refer to pages 16 and 17.
5
E-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Dry Mode
You can select the Dry mode if you want to dehumidify your room.
You can adjust the temperature in this mode.
If necessary, press the
(On/Off) button.
1
Result: The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode you selected last.
The indoor unit beeps.
2
Press the
button on the remote control until
is displayed.
Result: The indoor unit beeps each time you press the
button.
The air conditioner runs in the Dry mode.
Note
You can change modes at any time.
Press the
temperature is displayed.
button to adjust the temperature until the required
3
You can set the temperature between 61°F(16°C) and 86°F(30°C).
Result:
E
ach time you press the
button:
- The temperature is adjusted by 1°F
- The indoor unit beeps
The air conditioner starts dehumidifying and the fan speed is
adjusted automatically.
To control the airflow direction, refer to pages 16 and 17.
4
E-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Fan Mode
You can select the Fan mode if you want to ventilate your room. It helps to
refresh the air in your room. You can adjust the fan speed in this mode.
If necessary, press the
(On/Off) button.
1
Result: The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode you selected last.
The indoor unit beeps.
2
Press the
button on the remote control until
is displayed.
button.
Result: The indoor unit beeps each time you press the
The air conditioner runs in the Fan mode.
The temperature is set automatically.
Note
You can change modes at any time.
Press the
button to select the fan speed until the required setting
3
is displayed.
Low
Medium
High
Result: Each time you press the
button, the indoor unit beeps.
To control the airflow direction, refer to pages 16 and 17.
4
E-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Turbo Function
You can select the Turbo Function if you want to cool or heat your room in the
fastest way. After the 30-minute operation with the maximum setting,
it returns to the previous setting.
If necessary, press the
(On/Off) button.
1
Result: The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode you selected last.
The indoor unit beeps.
Press the
button.
2
Result: The temperature and fan settings are adjusted automatically.
The air conditioner cools or heats the room as quickly as possible.
A
fter 30 minutes, the air conditioner is reset automatically to the
previous setting.
ou can select the Turbo function in the Auto, Cool and Heat
Y
mode. If you select this function in the Dry or Fan mode,
the mode changes to the Auto mode.
Press the
30-minute period.
button again to stop the Turbo Function before the end of the
3
4
Result: The air conditioner is reset automatically to the previous setting.
To control the airflow direction, refer to pages 16 and 17.
E-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Energy Saving Function
You can select the Energy Saving Function to save energy when cooling or
heating.
If necessary, press the
(On/Off) button.
1
Result: The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode you selected last.
The indoor unit beeps.
Press the
Result: The indoor unit beeps.
The air conditioner runs in the Energy saving mode.
button.
2
The outer airflow blade moves up and down.
To stop the Energy saving mode, press the
again.
Note
You can select the Energy saving mode only in the Cool and Heat
mode.
Press the
temperature is displayed.
button to adjust the temperature until the required
3
4
5
Press the
displayed.
button to select the fan speed until the required setting is
To control the airflow direction, refer to pages 16 and 17.
E-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Airflow Direction Vertically
You can adjust the airflow direction vertically. The outer airflow
blade moves up and down to increase the efficiency of the cooling
or heating operation.
Press the
button until the required direction is set.
1
Result: The outer blade is adjusted vertically.
Press the
during operation.
button to move the blade up and down automatically
2
3
Press the
button again to stop the blade moving up and down.
Note
If you turn the air conditioner...
Then the blade...
Off
is closed completely.
On
set to the default position.
E-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Airflow Direction Horizontally
You can adjust the airflow direction horizontally with your hands.
The inner blades with small fins moves the air to the required direction.
Adjust the inner blades by moving them to left or right.
1
E-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the On Timer
You can set the On Timer to turn on the air conditioner automatically at
the appointed time. You can set the time from 1 hour to 24 hours.
Press the
button until the required time is displayed to set the On Timer.
1
2
You can set the time between 1 hour and 24 hours.
Press the
Result:
button to complete the setting.
The remaining time is displayed.
The timer indicator stops blinking.
The selected mode and the temperature on the display
disappear after 10 seconds.
The air conditioner turns on automatically at the appointed time
and the On Timer setting disappears.
Press the
button until the desired mode is displayed at the top of
3
theremote control to select the mode in advance.
Result: he air conditioner operates in the selected mode when it is
T
turned on.
Note
If you don’t use the remote control after setting the On Timer, it turns off
automatically after 25 hours.
To Cancel the On Timer
Press the
button to cancel the On Timer.
1
Note
If you press the
are canceled.
button, both the On Timer and the Off Timer
E-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Off Timer
You can set the Off Timer to turn off the air conditioner automatically at
the appointed time. You can set the time from 1 hour to 24 hours.
Press the
button until the required time is displayed to set the Off Timer.
1
2
You can set the time between 1 hour and 24 hours.
Press the
Result:
button to complete the setting.
The remaining time is displayed.
The timer indicator stops blinking.
The air conditioner turns off automatically at the appointed time
and the Off Timer setting disappears.
Example If you would like to turn the air conditioner on after
2 hours and to operate it for 2 hours:
1. Press the
2. Press the
3. Press the
4. Press the
button until‘2.0 Hr’is displayed.
button.
button until‘4.0 Hr’is displayed.
button.
Note
You can check or change the mode and/or the temperature by
pressing the
Timer.
button or the
button after setting the Off
To Cancel the Off Timer
Press the
button to cancel the Off Timer.
1
Note
If you press the
are canceled.
button, both the On Timer and the Off Timer
E-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Sleep Timer
You can set the Sleep Timer to turn off the air conditioner automatically
while you are sleeping. The air conditioner stops operating 6 hours after
you set the Sleep Timer.
Press the
Result:
button until the
indicator appears on the remote control.
1
The indoor unit beeps.
The air conditioner will be controlled as indicated in the
illustrations below.
Note
You can set Sleep Timer only in the Cool or Heat mode.
Cooling
Heating
The set temperature is
increased by 1°C every hour.
After the increase of 2°C,
the temperature is
maintained for 4 hours.
The set temperature is
decreased by 1°C every hour.
After the decrease of 2°C,
the temperature is
maintained for 4 hours.
To Cancel the Sleep Timer
Press the
Result:
button to cancel the Sleep Timer.
The indoor unit beeps.
1
The
indicator is no longer displayed.
The air conditioner operates normally.
E-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the 1 Hour Timer
You can set the 1 Hour Timer to turn off the air conditioner automatically
after an hour. It is the quick and convenient way using only one button.
Press the
control.
button until the
indicator appears on the remote
1
Press the
button until the desired mode is displayed at the remote control
2
to select the mode after setting the 1 Hour Timer.
Result: The air conditioner operates in the selected mode for an hour.
Note
If you set the 1 Hour Timer when the air conditioner is turned off,
the air conditioner turns on and operates for an hour.
To cancel the 1 Hour Timer
Press the
Result:
button to cancel the 1Hour Timer.
The indoor unit beeps.
1
The
indicator is no longer displayed.
The air conditioner operates normally.
E-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Recommendations
When you use your air conditioner, it is recommended to read the following :
Topic
Recommendation
Heating capacity
The heat pump inside the air conditioner absorbs
heat from outside air and brings it indoors.
If the temperature of the outside air drops, the
air conditioner heats less. If the room is not warm
enough, use an additional heating appliance.
Warm air circulation
The air conditioner circulates warm air to heat
your room. It will take some time to warm the
air in your room entirely after the air conditioner
turns on. Therefore, turn the air conditioner on
in advance.
Frost
When you select the Heat mode, frost may form in
the outdoor unit due to the low temperature and
high humidity.
If this happens :
The heating operation is stopped.
The air conditioner defrosts automatically
for about 7 minutes.
After about 7 minutes, the air conditioner starts
operating again normally.
High indoor and outdoor
temperatures
If both the indoor and outdoor temperatures are
high when you select the Heat mode, the fan and
the compressor of the outdoor unit may stop at
times. This is normal; wait until the air conditioner
turns on again.
Power failure
If power failure occurs when the air conditioner is
operating, the air conditioner turns off.
When the power returns, the air conditioner starts
up again automatically.
Protection mechanism
When the air conditioner is started immediately
after being plugged in or stopped, the normal
operation starts up after 3 minutes for the reason
of protection.
E-22
Download from Www.Somanuals.com. All Manuals Search And Download.
Temperature and Humidity Ranges
If you check the following tables, you can use your air conditioner more efficiently.
If the air conditioner is used at...
Then...
Heating capacity
The air conditioner may stop operating for the reason of protection.
Low temperatures
Water may leak and some malfunction may occur if the heat exchanger freezes.
High humidity levels
Water may condense and drip from the surface of the indoor unit if you don’t use
the air conditioner for a long time.
Operation
Outdoor Temperature
Indoor Temperature
Indoor Humidity
Heating
5°F to 75°F approx.
-15°C to 24°C approx.
14°F to 109°F approx.
-10°C to 43°C approx.
14°F to 109°F approx.
-10°C to 43°C approx.
80°F or less
-
27°C or less
Cooling
61°F to 90°F approx.
16°C to 32°C approx.
61°F to 90°F approx.
16°C to 32°C approx.
80% or less
-
Dehumidifying
If the outdoor temperature is as low as 32°F/0°C, the heating capacity drops up to 70~80% depending on
the operating condition.
If you use the air conditioner over 90°F/32°C (indoor temperature), the cooling capacity may drop.
Operating Your Air Conditioner Without the Remote Control
You can operate your air conditioner directly without the remote control.
To turn the air conditioner on, press the On/Off button on the right side of the
indoor unit.
1
Result:
The Operation indicator on the indoor unit lights up.
The indoor unit beeps.
The air conditioner starts up in the appropriate mode for the room
temperature. The air conditioner changes the Cool or Heat mode
automatically depending on the current temperature during
operation.
To turn the air conditioner off, press the On/Off button again.
2
Note
Even if you turned the air conditioner on with the On/Off button,
you can control it with the remote control.
E-23
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Guide
Before contacting the service center, check the following. It will save your time and theexpense of an
unnecessary call.
Problem
Explanation/Solution
The air conditioner does
not operate.
Check if the circuit breaker of the air conditioner is switched on.
Check if the air conditioner is turned on. If necessary,
press the
(On/Off) button on the remote control.
Check if the Timer indicator on the indoor unit is on.
If so:
- Wait until the set time is reached and the air conditioner starts
automatically.
- Cancel the Timer. (See pages 18 and 19 for further details)
The air conditioner does not operate
with the remote control.
Check if there are no obstacles in front of the indoor unit.
Check the remote control batteries.
Make sure that you are with in 7 meters from the indoor unit.
No beep is heard when you press
Check if you are pointing the remote control at the remote control
sensor on the right side of the indoor unit.
Replace the remote control batteries if necessary.
the
(On/Off) button on the
remote control.
The air conditioner does not
cool or heat.
Check if the correct operating mode has been selected
(Auto, Cool, Heat).
The room temperature may be too low or too high.
Check if the air filter is dirty; refer to page 25 for cleaning
instructions.
Check that there is no obstacle in front of the outdoor unit.
When heating, the required
room temperature is never reached
and the air conditioner frequently
stops.
Check if the required temperature is set correctly.
Increase the fan speed.
If the airflow is directed upwards, set the blade downwards with the
remote control.
The fan speed does not change when
Check if the mode is set to the Auto, Cool, Heat or Fan mode;
in the Dry mode, the fan speed changes automatically.
you press the
button.
The airflow direction does not
change when you press
Check if the air conditioner has been turned on; if necessary,
press the
(On/Off) button on the remote control.
the
button.
The timer is not correctly triggered.
Check if the timer is set correctly; see pages 18 and 19.
You can use the Fan mode to ventilate your room.
Odor permeates into the room during
operation.
E-24
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning Your Air Conditioner
For the best use of your air conditioner, you must clean it every 2 weeks to
remove the dust that accumulates on the air filter.
IMPORTANT
Before cleaning your air conditioner, check if you have turned
off the circuit breaker.
Open the upper front grille by pulling the lower right and left tabs of the grille.
Pull air filters out of each tab of the grille.
1
2
3
4
5
Remove all dust on the air filters with a vacuum cleaner or brush.
When you finish, insert air filters by fixing them to each tab of the grille.
Body
Air filter
Body groove
Front grille
To close the front grille, fix it to hooks and push down the lower right and left
tabs of the grille.
Clean the front grille with a damp cloth and mild detergent (do NOT use
benzene, solvents or other chemicals).
6
Front grille
Body
Hook
Note
If you have not used the air conditioner for a long time, select the Fan
mode for 3 to 4 hours to dry the inside of the air conditioner.
E-25
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning Deodorizing and Bio Filter (Option)
There are Deodorizing and Bio filters inside your air conditioner.
They remove odors and dust in your room. You should clean the filters every
3 months.
Open the upper front grille by pulling the lower right and left tabs of the grille.
Pull out the deodorizing and Bio filter.
1
2
3
4
Bio Filter
Deodorizing Filter
Wash the filters with clean water, then dry them in the shade.
Insert the filters in their place.
Note
You can change the position of filters with each other.
Close the front grille.
5
E-26
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
Download from Www.Somanuals.com. All Manuals Search And Download.
Contact SAMSUNG WORLD WIDE
If you have any comments or questions regarding a Samsung product, contact the SAMSUNG customer care center.
Country
Customer Care Center
Web Site
CANADA
MEXICO
U.S.A
ARGENTINE
BRAZIL
CHILE
1-800-SAMSUNG(726-7864)
01-800-SAMSUNG(726-7864)
1-800-SAMSUNG(726-7864)
0800-333-3733
0800-124-4214004-0000
800-SAMSUNG(726-7864)
00-1800-5077267
800-7919267
Nicaragua
Honduras
COSTA RICA
ECUADOR
EL SALVADOR
GUATEMALA
JAMAICA
0-800-507-7267
1-800-10-7267
800-6225
1-800-299-0013
1-800-234-7267
800-7267
1-800-682-3180
PANAMA
PUERTO RICO
REP. DOMINICA
TRINIDAD & TOBAGO
VENEZUELA
COLOMBIA
Turkey
1-800-751-2676
1-800-SAMSUNG(726-7864)
0-800-100-5303
01-8000112112
444 77 11
SOUTH AFRICA
0860-SAMSUNG(726-7864 )
800-SAMSUNG (726-7864)
8000-4726
U.A.E
C Samsung Electronics Co., Ltd. All Rights Reserved.
Printed in Korea
Download from Www.Somanuals.com. All Manuals Search And Download.
|