OY L
C A P P U C C
I
N O
TYPE SUP 016
User's and maintenance booklet
•
We congratulate for having bought this top-quality espresso
machine and thank you for choosing Saeco.
Before operating the machine, we recommend to read the following
instructions thouroughly which explain how to use, clean and
maintain the machine.
HOUSEHOLD USE ONLY
Download from Www.Somanuals.com. All Manuals Search And Download.
3
2 5
2 9
2 7
2 6
2 8
1 0
1 1
1 2
1 3
1 4
4
1 5
1 6
1 7
18
9
1 9
2 0
8
7
6
5
2 1
2 2
3
2
1
2 4
2 3
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
3 0
3 2
3 4
3 7
3 9
3 1
3 3
3 6
3 8
4 0
4 1
4 4
4 6
4 8
5 0
4 2
4 3
5
6
4 5
4 7
4 9
+
-
3 5
7
7
7
5 1
5 2
7
7
Download from Www.Somanuals.com. All Manuals Search And Download.
TECHNICAL DATA
DESCRIPTIO N O F SYMBO LS
74
75
Ho w to u se th e in stru ctio n s
Voltage rating
see rating plate on the back of the machine
see rating plate on the back of the machine
approx. 385 x 330 x 395 mm
metal and plastic material
approx. 16 kg
Nominal power
These instructionscannotanticipate everypossible
use of the machine.
For further information or questions concerning
specific situations or problems, please contact
the local dealer or manufacturer directly.
Sa ve th e se in stru ctio n s ca re fu lly a n d
m a k e su re to h a n d th e m to o th e r
u se rs.
Dimensions (length x width x height)
Machine case
W eight
Cable length
approx. 1.2 m
System
free flow thermal cut-out, alternating piston pump
electronic
Temperature control
Coffee grinder adjustment
Coffee grounds ejection
Ground coffee dosage
Cup programming
W ater tank
B
The warning triangle shows all important safety
indications to ensure the user’s safety.
The non-observance of said instructions may
cause serious injuries!
Reference to figures, parts of the machine and
control elements are given by numbers or letters,
as figure B exemplifies.
grinding adjustment device
automatic
coffee releasing device
0-250 ml approx.
removable, transparent tank
electronic, continuous
W ater regulation
Capacity
- water tank
approx. 2.4 litres
- bean coffee container
300g bean coffee
The first cover page of the manual shows figures
relevant to the text. Thus, keep it open while
reading the instructions.
Steam/ hot water dispensing tube
Steam/ hot water dispensing
Heating time
adjustable, supplied with burn protection
adjustable, continuous
approx. 2 min.
Brewing time
- espresso coffee
- coffee
approx. 20s/ cup
SAVE THESE INSTRUCTIO NS
approx. 30s/ cup
- hot water
approx. 60s/ cup
- milk (cappuccino)
approx. 60-90s cream/ cup
incorporated
The lightning flash with arrowhead symbol, within
The exclamation point within an equilateral triangle
Overheating protection
Insulation
an equilateral triangle, is intended to alert the user
to the presence of unisulated «dangerous voltage»
within the product‘s enclosure that may be of
sufficient magnitude to constitute a risk of fire or
electric shock to persons.
is intended to alert the user to the presence of
important operating and maintena nce (servicing)
instructions in the literature accompanying the
appliance.
protection range I
Approvals
see rating plate on the back of the machine
EN 60335-2-15(96) - EN 60335-2-14(96) - EN 55014
in compliance with the warranty certificate enclosed herein
In compliance with EN regulation
W arranty
Ta b le o f co n te n ts
Acce sso rie s (included in the machine price)
Measuring spoon
Page
Page
Central unit key
75
77
79
79
80
80
80
81
Technical data
Safety rules
82
86
87
88
90
91
94
95
Programming the machine
Recommendation
Grind adjustment
Cleaning brush
W ater hardness detecting strips
Machine controls and parts
Description of the control panel
Unpacking/ Installation
Power supply connection
Starting and use
Brewing
Incorporated Safety Devices
Cleaning and maintenance operations
Disposal
The manufacturer reserves the right to make improvements to the appliance due to technological
advancement.
Drainage
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY RULES
76
77
Po sitio n in g
A
Place the machine on a plane surface, where
nobody can turn it upside down or be hurt. Hot
water or overheated steam might escape from
the machine: danger of burns! Never use the
coffee machine outdoors or inside rooms with
low temperature conditions. Do not place the
machine on hot surfaces or in the proximity of
open flames to avoid possible damages of the
case.
Ele ctrica l p a rts sh o u ld n e ve r b e in
co n ta ct w ith w a te r: d a n g e r o f sh o rt-
circu it! Ste a m a n d h o t w a te r m a y
ca u se b u rn s. N e ve r d ire ct ste a m o r
w a te r je ts to w a rd s th e b o d y ; sp e cia l
a tte n tio n m u st b e p a id w h e n to u ch in g
th e ste a m / h o t w a te r sp o u t a n d th e
h e a tin g p la te : d a n g e r o f b u rn s!
C
Th is m a ch in e m u st b e u se d e x clu sive ly
fo r t h e p u r p o s e s it h a s b e e n
m a n u fa ctu re d .
Do not make technical changes for any reason
whatsoever; any improper use is forbidden, due
to the risks which might occur!
Da n g e r o f b u rn s
Do not direct the overheated steam or hot water
jet towards you or other people. Do not touch hot
surfaces, such as the steam/ hot water spout.
B
C
D
N e ce ssa ry sp a ce
+
+
-
-
W a rn in g s
The machine shall only be used by adults and
properly instructed persons.
For a proper operation of the machine it is
advisable to keep to the following indications:
- choose a levelled surface
- choose a properly lit and hygienic room
provided with accessible sockets
- leave a minimum distance of 100 mm between
the machine and the wall
Vo lta g e
Never touch parts under current! They might
cause electric shocks, serious injuries and death.
The machine must be connected to a socket with
suitable voltage. Voltage must correspond to the
voltage shown on the appliance rating plate.
E
E
D
Cle a n in g
Before cleaning the machine, make sure to
switch off all keys and unplug the machine. W ait
until the machine cools down. Never plunge the
machine into water! Do not tamper with the inner
partsofthe machine and neveropenthe machine.
A
Po w e r co rd
Never use the machine with a defective power
cord. Replace defective power cords and plugs,
contacting authorised personnel . Do not extend
the power cord around corners, sharp edges or
over hot parts and protect it from oil. Do not shift
or move the machine by pulling its power cord.
Do not unplug the machine by pulling the power
cord and never touch it with wet hands. Make
sure the power cord does not hang from tables
or shelves.
+
-
+
-
10cm
10cm
Re p a ir/ m a in te n a n ce
In case of defect or suspected damage following
a fall, unplug the machine immediately. Never
use a defective appliance. Only skilled personnel
are authorised to carry out repairs. The
manufacturer declines any liability whatsoever,
should repairs fail to be carried out by authorised
personnel.
+
-
B
Ke e p ch ild re n a w a y
In case of fires, use carbon dioxide (CO2)
extinguishers. Never use water or powder
extinguishers.
Do not allow children to play with the machine.
Children are not aware of the potential danger
caused by electric appliances.
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATIO N
MACHINE CO NTRO LS AN D PARTS
79
80
circu it! O ve rh e a te d ste a m a n d h o t
w a te r m a y ca u se b u rn s. Do n o t d ire ct
ste a m o r w a te r je t to w a rd s th e b o d y ;
fu rth e rm o re , g re a t a tte n tio n m u st b e
g ive n w he n to uching e ithe r the ste a m /
h o t w a te r sp o u t o r th e h e a tin g p la te :
d a n g e r o f b u rn s!
Un p a ck in g / in sta lla tio n
IMPO RTANT SAFEGUARDS
a) A short power-supply cord (or detachable power-supply cord) is to be provided to reduce
risks resulting from becoming entangled in or tripping over a longer cord.
b) Longer detachable power-supply cords or extension cords are available and may be used
if care is exercised in their use.
Standard packing is strong enough to protect the
machine during mailshipping. Keep thispackage
to return the machine to the manufacturer,
whenever necessary.
c) If a long detachable power-supply cord or extension cords is used,
1) The marked electrical rating of the detachable power-supply cord or extension cord
should be at least as great as the electrical rating of the appliance,
2) If the appliance is of the grounded type, the extension cord should be a grounding-
type 3-wire cord, and
Before installing the machine, keep to the safety
indications at page 77.
Never use the machine without water or coffee
beans.
W henever possible, use the machine with swivel
(24). W hen installing the machine, make sure
the swivel is always fitted in the provided area on
the lower side of the machine.
3) The longer cord should be arranged so that it will not drape over the counter top or
table top where it can be pulled on by children or tripped over.
Remove measuring spoon, brush and the central
unit key from the coffee grounds container (1)
and keep them within reach.
1 6 Coffee bean container
1
2
3
4
5
6
7
8
9
Coffee grounds container
Drip tray
Cup holder surface
Main switch
1 7 Grind adjustment lever
1 8 Coffee dosage adjustment lever
1 9 Service door
2 0 Filling funnel
2 1 Handle for assembling and disassembling
of central unit
2 2 Central unit
2 3 Coffee rest drawer
2 4 Swivel
2 5 Cappuccinatore
2 6 Suction pipe
Po w e r su p p ly co n n e ctio n
Unwind the power cord (5) from the rear side
of the machine.
Power cord
W a rning: electric current may cause d e a th !
Always keep to safety rules.
Coffee dispensing unit
Steam/ hot water spout wit burn-protection
Control panel
3 0
Remove the cover (15) and fill the container with
coffee beans (300 g approx.), then, replace the
cover. Adjust grinding by means of the grind
adjustment lever (17), positioning it on point “5”
of the scale.
The coffee machine must be connected to an
adequate socket. Voltage must suit to the voltage
specified on the appliance rating plate.
Steam knob
1 0 Cup heating plate
1 1 W ater tank
1 2 W ater tank cover
1 3 W ater level
1 4 Pre-ground coffee container with cover
1 5 Coffee bean container cover
2 7 Dispenser
2 8 Cappuccinatore adjusting valve
2 9 Cappuccinatore cover
Never use defective power cords! Defective
power cords and plugs must be replaced by an
authorised personnel.
Never fill the coffee bean container with other
products since they might damage the machine!
De scrip tio n o f th e co n tro l p a n e l
Digital display
WARMING UP......
Standby switch:
energy saving function on/ off
Before filling the container with coffee beans,
make sure the pre-ground coffee container (14)
is closed to prevent coffee beans from falling into
it. They might damage the machine!
Should an extension cord be used, check its
perfect conditions. The extension cord must have
a minimum section of 1,5 mm2 or 16 AW G and
must be supplied with a three-pole plug/ socket.
ESC
ENT
Selection key for 1 or 2 cups of tall coffee or key
“
” in the programming mode
Selection key for 1 or 2 cups of regular coffee
or key “ ” in the programming mode
Remove water tank (11) from the machine,
remove its cover (12) and fill it with cold water
(approx. 2.4l). A valve on the tank bottom
prevents water from escaping.
Sta rtin g a n d u se
Selection key for 1 or 2 cups of espresso coffee
or “ESC” in the programming mode
Pre-ground coffee selection button or “ENT” in
the programming mode
Be fo re in sta llin g th e w a te r ta n k in th e
m a ch in e , m a k e su re th e co ffe e b e a n
co n ta in e r co ve r is p ro p e rly fitte d .
Pa rts u n d e r cu rre n t sh a ll n e ve r b e in
co n ta ct w ith w a te r: d a n g e r o f sh o rt-
Cappuccino selection key
Hot water on/ off key
Download from Www.Somanuals.com. All Manuals Search And Download.
PRO GRAMMIN G THE MACHINE
DRAINAGE
81
82
3 1
Im p o rta n t: It is a d visa b le to d ra in th e
m a ch in e b e fo re th e first sta rt, a fte r a
p ro lo n g e d p e rio d th e m a ch in e h a s n o t
b e e n u se d o r w h e n e ve r th e w a te r
ta n k h a s b e e n co m p le te ly e m p tie d .
Furthermore, should the pump be defective, the
display shows:
"VENTILATE
Pro g ra m m in g th e m a ch in e
3 2
"PLEASE ACTIVADE "
"SYSTEM 2
keys
selected item. It is possible to modify the selected
figuresina menuitemusing the keys . The key
. The keyENTallowsyouto activate the
Install the water tank, slightly pressing over it to
fit the valve which will open automatically.
"
ENT memorizes the selected options (for instance
“ON” for the cup heating plate).
W a te r h a rd n e ss a d ju stm e n t
Inorderto adjustthe waterhardness, itisnecessary
to test the water using the strip supplied with the
machine. Dip the strip into the water for a second,
shake off excess water gently, wait approx. 1
minute and read the results.
Do not fill the tank with an excessive quantity of
water.
Should you accidentally change some data,
press ESC (*…) to leave the menu item without
saving the new options which were selected
accidentally.
"
Always fill the tank with fresh water only: hot
water as well as other fluids might damage the
tank. Never use carbon dioxide added water.
Move the asterisk at the end of the line to the
menu item “W ATER HARDN .” using the keys
La n g u a g e se le ctio n
Move the a sterisk to the menu item
To enter the programming mode, press the key
EN T ( pre-ground coffee) when the machine
is on and keep it pressed until the first two lines
of the programming mode are displayed:
and select it by means of the EN T
“LAN GUAGE” using the keys
. Press
button.
EN Tto activate this item. The following message
will be displayed:
The following message will be displayed:
Do not switch on the machine on if the water tank
is empty: always make sure there is enough
water in the tank!
"1 LANGUAGE
"2 SYSTEM 2
"
"
"3 WATER HARDN./ "
"1 LANGUAGE
"ENGLISH
"
"
"HARDNESS 3
"
At the end of the line a blinking asterisk is
displayed, which can be moved up and down
The keys
options:
allow you to change the set
Connect the plug to the socket and press the main
switch. The following message will be displayed:
The keys allow you to change the set options :
“ENGLISH” , “ITALIANO” , “FRANÇAIS”,
with the keys
(tall and regular coffee).
“DEUTSCH”, “NEERLANDAIS”, “ESPAÑOL”
“PO RTUGUES”.
,
If the asterisk is on the first menu, press
button
HARDN ESS 4
(hard water)
HARDN ESS 3
(medium water)
HARDN ESS 2
(soft water)
"WARMING UP......."
to move it on the second menu and vice versa.
The display shows the following sequence of
messages:
Should
En a b lin g o f se co n d h e a tin g sy ste m
Royal Cappuccino is equipped with two boilers
with independent circuits. One of these boilers
ca n be disconnected. By pressing
Hardness 4
"ENERGY
"SAVING
"
"
Hardness 3
Hardness 2
Hardness 1
1
2
3
4
5
6
7
8
9
LANGUAGE
SYSTEM 2
WATER HARDN.
CUP HEATER
TEMP. L. COFFEE
TEMP. COFFEE
TEMP. S. COFFEE
PREBREWING
PREGRINDING
10 PROG. H. WATER
11 PROG. CAPPUC.
12 TOTAL COFFEE
13 DESCALING
14 SIGN. DESCAL.
15 TIMER
HARDN ESS 1
(very soft water)
keys
move the asterisk at the end of the
line to the menu item “SYSTEM 2”. Press EN T
to activate this item. The following message will
be displayed:
be displayed, press button
“Standby” to
disactivate the energy saving mode.
Dra in a g e
Cu p h e a tin g p la te co n n e ctio n
Royal Cappuccino is equipped with a useful cup
heating plate which can be disconnected, if
required.
16 VENDING
17 EXIT
"2 SYSTEM 2
"ON
"
"
Direct the steam/ hot water spout on the drip tray
(2). Place a cup or another suitable container
under the dispensing tube, then turn the steam/
hot water knob counterclockwise. The pump
starts automatically. W ait until a regular water jet
is obtained, then close the knob. The machine is
now drained and ready to work.
To leave the menu, move the asterisk at the end
of the line to item <<Ex it>> using the key
Then, press EN T pre-ground coffee). The
The keys
allow you to change the set
Press keys
to move the asterisk to item
.
options: O N , O FF.
“CUP HEATER”. Press EN T to activate this
function.
The following message will be displayed:
If the second boiler is disconnected it is not
possible to dispense steam and therefore cap-
puccino can’t be prepared. Should the cappuc-
cino selection button be pressed
or the steam/ hot water knob be opened, the
display shows the following message:
(
machine is now in the normal mode again.
The following message will be displayed:
Se le ctin g sin g le m e n u s
"4 CUP HEATER
"ON
"
"
"SELECT PRODUCT "
"READY FOR USE "
Select the different menu items by means of the
Download from Www.Somanuals.com. All Manuals Search And Download.
PRO GRAMMIN G THE MACHINE
PRO GRAMMIN G THE MACHINE
83
84
time saving whenever the machine is often used.
This function is not recommended in all other
cases, because fresh ground coffee is by far
better.
The following message will be displayed:
The keys
allow you to change the set
Press keys
to move the asterisk to item
options “O N ” or “O FF”.
“PRO G.CAPUC.”. Press EN T to activate this
function:
The following message will be displayed:
"STANDBY
"AFTER 0:00
"
"
Te m p e ra tu re se le ctio n
Press keys
to move the asterisk to item
W ith Royal Cappuccino a precise adjustment of
the coffee temperature can be executed. Move
the asterisk at the end of the line to the menu items
“Te m p . l. co ffe e”, “Te m p . co ffe e” or
“Te m p . s. co ffe e” and select it by means of
the EN T key.
By means of the same keys
, select the
“PREGRIN DIN G”. Press EN T to activate this
"11 PROG. CAPUC. "
function.
"ON
"
suitable time and confirm the value throughEN T
button.
The following message is displayed:
The keys
allow you to change the set
W hen the selected time is over the following
message is displayed:
options: “O N”, “O FF”.
Depending on the selection, the following
messages will be displayed:
"9 PREGRINDING "
"ON
"
Coffee counter
"ENERGY
"SAVING
"
"
Press keys
to move the asterisk to item
"5 TEMP. L. COFFEE"
The keys
allow you to change the set
“TO TAL CO FFEE” and select it by means of the
EN T key. The following message will be
displayed:
"MEDIUM
"
options “O N ”, “O FF”.
The machine stops and can be switched on
again by means of button “standby”.
"6 TEMP. COFFEE "
"MEDIUM
Ho t w a te r p ro g ra m m in g
"
W henever this function is enabled, the selected
water amount is constantly dispensed. On the
contrary, whenever this function is disabled hot
water is dispensed until the user stops the
dispensing. Ho t w a te r a m o u n t ca n o n ly
b e p ro g ra m m e d w ith p ro g ra m m in g
m o d e e n a b le d .
"12 TOTAL COFFEE "
Ve n d in g fu n ctio n s
"
XX"
"7 TEMP. S. COFFEE"
Royal Cappuccino is equipped with a counter
allowing the machine statistic analysis while
detecting the different dispensing operations. It
is also equipped with another counter which is
able to stop the dispensing operations after a
certain number. These functions are protected by
a special access code.
This value cannot be modified. Quit the menu by
means of the EN T or ESC keys.
The keys
allow you to change the set options
“M in im u m ”, “m a x im u m ”, “h ig h ”,
“m e d iu m ” or “lo w ”.
De sca lin g
Move the asterisk at the end of the line to menu
item “De sca lin g” and select it by means of the
EN T key.
- “PRO G. H. W ATER”. Press EN T to activate
Pre b re w in g fu n ctio n
this function.
As soon as the coffee has been moistened, the
pump stops for a while in order to allow a better
utilization of the coffee powder.
Move the asterisk at the end of the line to the
menu item “PREBREW IN G” and select it by
means of the EN T key.
By means of keys
move the asterisk to
The following message will be displayed:
The following message will be displayed:
item “VEN DIN G” and select it through the
EN T key. From the displayed submenu it is
possible to select one of the following items by
"13 DESCALING
For descaling procedure, see page 92.
Tim e r
The timer enables the automatic switching off of
the machine after a preset period, which can be
set from 15 minutes to 12 hours after last
dispensing. If after a few seconds coffee is
brewed again, the timer is reset. If the value set
is 0 :0 0 , the timer function is not activated and the
machine does not switch off.
"
"10 PROG. H. WATER"
"ON
"
meansofthe same keys
. Onthe contrary,
The following message will be displayed:
if the hot water selection key is pressed, the
submenu can be quit.
The following messages will be displayed:
The keys
allow you to change the set
"8 PREBREWING
"ON
"
"
options: “O N”, “O FF”.
"CODE
"
"
Ca p p u ccin o p ro g ra m m in g
The keys
allow you to change the set
****"
W henever this function is enabled, the same
amount of cappuccino is constantly dispensed.
On the contrary, whenever this function is
disabled, cappuccino is brewed until the user
stops the dispensing. Ca p p u ccin o a m o u n t
ca n o n ly b e p r o g r a m m e d w it h
p ro g ra m m in g m o d e e n a b le d .
options “O N”, “O FF”,“LO N G” (in the latter
case the pump stop is longer).
"1 LARGE COFFEE "
"TOTAL
"
Pre -g rin d in g fu n ctio n
Move the asterisk at the end of the line to menu
By activating this function, grinding occurs every
time the doser is empty. So a ground coffee
portion is always ready in the doser, allowing a
"1 COFFEE
"TOTAL
"
"
item “Tim e r” by means of the keys
.
Press EN T to select this item.
Download from Www.Somanuals.com. All Manuals Search And Download.
PRO GRAMMIN G THE MACHINE
RECO MMEN DATIO NS
85
86
Co d e e n te rin g
To enter the code, press keys
dispensed from the last reset.
Co u n te r
"1 SMALL COFFEE "
From the VEN DIN G menu, move the asterisk to
and move
"TOTAL
"
"COUNTER
"LOCKING:
"
the CO FFEE menu by means of keys
;
the asterisk to the counter to be changed; select
it through the EN T button.
The following message will be displayed:
XX"
"HOT WATER
"TOTAL
"
"
confirm the selection through EN T.
By means of the same keys
, it is possible
After a certain number of cycles, this function
allows to stop the coffee dispensing (excluding
hot water, steam and cappuccino dispensing
operations). It can also be used, for example, to
program the machine servicing.
If the 0 value is set, the function is disabled.
From the VEN DIN G menu, move the asterisk to
the CO UN TER menu by mea ns of
to modify the selected value (to reset the counter,
for example). Press EN T to save a new value.
On the contrary, by pressingESC the new value
entering is stopped and, as a result, the former
counter setting shall be considered.
"COUNTER
"LOCKING
"
"
"CODE??
"
Enter the number to be set on the first character by
means of keys and confirm the selection with
"COUNTER
"CYCLES
"
"
ENT. The entered number is then saved and the
cursormovesautomaticallytothefollowingcharacter.
If a wrong code has been entered, the following
message will be displayed for about two se-
conds:
Sm a ll co ffe e co u n te r
keys
and confirm the selection through
Co d e p ro g ra m m in g
"1 SMALL COFFEE "
"TOTAL:
EN T.
A code protects the access to the machine
counters; enter it for each programming section
and before carrying out any modification. As
soon as the code is entered, modifications can
be carried out without entering it again as long
as the programming function is enabled.
The machine is not supplied with a code. Keep
to the following indica tions for code
programming:
XX"
Press the same keys to modify the selected value
(for example to set a new servicing limit). Through
EN T a new value can be saved. On the
contrary, by pressingESC the new value entering
is stopped and, as a result, the former counter
setting shall be considered.
W hen the set limit has been reached, the coffee
dispensing stops and the following two messages
are displayed:
"CODE FAULTY
"
The counter shows the small coffee amount
dispensed from the last reset.
From the VEN DIN G menu, move the asterisk to
the SMALL CO FFEE menu by means of
After having entered three wrong codes, the
entering procedure is not allowed any longer.
keys
; confirm the selection throughEN T.
Co u n te r m o d ifica tio n
La rg e co ffe e co u n te r
"1 LARGE COFFEE "
By means of the same keys
, it is possible
to modify the selected value (to reset the counter,
for example). Press EN T to save a new value.
On the contrary, by pressingESC the new value
entering is stopped and, as a result, the former
counter setting shall be considered.
By means of keys
move the asterisk to
item“VEN DIN G” and select it through theEN T
key. The following message will be displayed:
"COFFEE DISPENS. "
"BLOCKED
"
"TOTAL:
XX"
"CODE
"
"
"SELECT PRODUCT "
"READY FOR USE "
The counter shows the large coffee amount
dispensed from the last reset.
****"
Ho t w a te r d isp e n sin g co u n te r
From the VENDING menu, move the asterisk to the
By means of keys enter the number to be set on
the first character and confirm the selection
through the EN T key. The entered number is
saved and the cursor moves automatically to the
following character.
"HOT WATER
"TOTAL:
"
XX"
Reset the counters by pressing the cappuccino
LARGE COFFEEmenu by means of keys
;
selection key
.
confirm the selection with buttonENT.
By means of the same keys
it is possible
Do sa g e o f g ro u n d co ffe e
The counter shows the hot water amount (in ml)
dispensed from the last reset.
From the VEN DIN G menu, move the asterisk to
the HO T W ATER menu by mea ns of
to modify the selected value (to reset the counter,
for example). Use the EN T button to save a new
value. Press the ESC button to stop the new value
entering procedure and, as a result, the former
counter setting shall be considered.
3 3
After having entered the complete new code, it
is necessary to save it.
The following message will be displayed:
The coffee dosage adjustment lever (18) allows
the selection of the grinding coffee amount from
6 to 9 grams. Place lever (18) on the required
position.
keys
; confirm the selection throughEN T.
By means of the same keys
, it is possible
"NEW CODE=XXXX "
to modify the selected value (to reset the counter,
for example). Press EN T to save a new value.
On the contrary, by pressingESC the new value
entering is stopped and, as a result, the former
counter setting shall be considered.
Co ffe e co u n te r
"SAVE NO
"
RECO MMEN DATIO N S
"1 COFFEE
"TOTAL:
"
XX"
By means of keys
the code can be saved
Pro lo n g e d id le n e ss
or not saved: YES or N O .
If the machine hasn’t been used for a prolonged
The counter shows the regular coffee amount
Download from Www.Somanuals.com. All Manuals Search And Download.
RECO MMEN DATIO NS
BREW ING
87
88
period, it is advisable for hygienic reasons to run
a rinse cycle through the machine.
The machine does not stop: remove the grounds
container and empty it.
BREW IN G
each cup; for two cups, it grinds two portions of
coffee, one after the other, thus ensuring optimum
Royal Cappuccino is equipped with 2 indepen- coffee quality.
dent heating systems which may dispense at the
Place a cup under the steam/ hot water spout (7)
and fill it with water by operating the hot water
knob.
Grin d a d ju stm e n t
If the coffee flows too quickly (coarse grind) or too
slowly (fine grind) into the cup, adjust coffee grinder.
The recommended grind level is position 5.
same time coffee and hot water, coffee and
steam or coffee and cappuccino.
Adjust the grinding degree according to the
instructions mentioned at page 87.
If, during the dispensing of 2 coffees, hot water,
steam or cappuccino are dispensed at the same
time, it may happen that the second coffee
portion is not immediately ground after the first
one, but only at the end of the first coffee
dispensing.
Pre h e a tin g cu p s
Cups may be preheated by placing them on the
special cup heating plate.
Should grinding be too coarse, adjust it on a
lower value (e.g. from 5 to 3). On the contrary,
should grinding be too fine, adjust it on a higher
value (e.g. from 5 to 7).
Adjust the grinding degree only when the coffee
grinder is running.
Te m p e ra tu re le d
W hen starting the machine, the following
message is displayed:
Co ffe e d isp e n sin g
Cu p le ve l fillin g
This machine allows the precise dosage of the
coffee quantity, according to the cup dimension.
Place one ortwo preheated cupsonthe cupholder
grill (3) under the dispenser (6). By pressing the
releva nt selection key, the ma chine will
automatically dispense the selected coffee.
"WARMING UP
"
Adjust the grind level only when the coffee
grinder is running. Avoid any extreme adjustment
(for instance on position 1) whenever possible.
It is preferable to try another coffee blend, since
not all coffee blends are suitable.
The desired quantity
throughthe selectionkeys. The relevantmessages
will be displayed.
can be selected
As soon as the operating temperature has been
reached, the following message is displayed:
Dispensing may be interrupted by pressing one
of the coffee selection keys, if an excessive water
amount has been selected. Should you interrupt
the coffee flow after the first of two coffees, the
second is not dispensed.
"SELECT PRODUCT "
"READY FOR USE "
To set the quantity of coffee to be dispensed, it
is necessary to press the relevant selection key
till the desired quantity of coffee is obtained
(max. 250 ml approx.).
Co ffe e b le n d s
Make sure coffee is fresh. An espresso roast is
preferable.
In order to obtain a strong and aromatic espres-
so coffee, use special blends suitable for espres-
so coffee machines and special cups with thick
sides.
Keep coffee in a cool place, in an hermetically
sealed container.
Pre -g ro u n d co ffe e
During this operation, the following message is
displayed:
Em p ty co ffe e b e a n co n ta in e r
W hen coffee beans run out, the coffee grinder
stops and the following message is displayed:
Make sure to use pre-ground coffee only (medium
ground). Never use whole beans or soluble
coffee.
"1 SMALL COFFEE "
"PROG. QUANTITY "
"COF. BEANS EMPTY "
The ma chine considers a utoma tica lly the
necessary amounts to brew two cups of coffee.
Fill the container and restart the cycle.
O p e ra tio n tim e
The machine may be kept on all day long.
However, in case of a prolonged period of
idleness, it is advisable to enable the energy
Em p ty w a te r ta n k
Right before brewing coffee, fill the container
with freshly ground coffee. For best results, make
sure coffee blend is fresh.
Remember that ground coffee ages soon, thus
losing its quality!
Atte ntion!Ifthe pre-brewing functionisenabled
during the cups dosage adjustment, keep the
selected key pressed even during the pump stop
until the desired amount is reached.
W hen water runs out, the program stops
automatically and the following message is
displayed:
saving function by pressing the standby
switch. If the timer is properly programmed, this
operation is automatic: for this purpose, see
page 84.
In case of a prolonged period of idleness, it is
advised to switch the main switch (4) off; once
switched on again, the machine will be ready to
be used within two minutes.
"WATERTANK EMPTY "
Do u b le q u a n tity o f co ffe e o r 2 cu p s o f
co ffe e
By pressing one of the three selection keys twice,
before coffee dispensing begins, the machine
will brew a double portion of coffee.
3 5
Important!
Fill the tank and restart the cycle.
Use the measuring spoon supplied to fill the
container (14) with a single portion of ground
coffee! Use a full measure only.
Gro u n d s co n ta in e r w a rn in g lig h t
As soon as there are 30 grounds in the container,
the following message is displayed:
Sw itch in g o ff th e m a ch in e
Switch the machine off only after the coffee cycle
has been concluded.
Co ffe e g rin d in g
3 4
This machine grinds a portion of fresh coffee for
To dispense coffee, press pre-ground coffee
"DREGDRAWER FULL "
"READY FOR USE "
button
and the desired selection key (large
Download from Www.Somanuals.com. All Manuals Search And Download.
BREW ING
SAFETY DEVICES
89
90
coffee, coffee, small coffee) to obtain a cup of
coffee.
rature, close the knob and immediately clean the
spout with a damp cloth.
cappuccino selection key.
"HOT WATER
"PROGR. QUANTITY "
"
Cappuccino dispensing can be adjusted by turning
the special Cappuccinatore adjustment valve (28).
Note: it is suggested to use milk with low fat
amounts (1.5%).
Atte n tio n : the spout is hot, it may cause burns!
Im p o rta n t! This function does not allow the
double coffee cycle.
3 6
Ca p p u ccin o
Place a glass or cup under the steam/ hot water
spout (7), then press the hot water selection key.
Hot water will be automatically dispensed.
Throughthe specialCappuccinatore, thismachine
canbrew a realcappuccino withoutanyproblem.
By pressing the cappuccino button, these two
messages will be alternately displayed:
Dispensing may be interrupted by pressing one
of the coffee selection keys, if an excessive water
amount has been selected.
Ca p p u ccin a to re cle a n in g
Letthe Cappuccinatore draina fullwatercontainer
after each cappuccino dispensing: in this way,
the device will be perfectly cleaned.
Ste a m d isp e n sin g
To heat milk or other drinks.
Ho t w a te r d isp e n sin g
"CAPPUCCINO
"
Hot water dispensing is accomplished through
an independent water circuit which ensures the
correct temperature and supplies tasteless hot
water to be used for tea, soup, etc.
In co rp o ra te d sa fe ty d e vice s
Au to m a tic o ff
Should the service door be open, the machine
automatically switches off. If the central unit is not
mounted, only water and steam can be
dispensed.
"READY FOR USE "
"SELECT FOR USE "
"READY FOR USE "
Always clean the spout with a damp cloth soon
after the use; otherwise, it might be difficult to
remove milk residues.
By operating the hot water key, the following two
messages will be displayed:
That is because the machine, as mentioned
before, can dispense two products at the same
time.
Ele ctro n ic g rin d in g tim e co n tro l
As soon as the coffee bean container is empty,
grinding automatically stops after 20 seconds
approx. Fill the container with coffee beans, as
shown at page 80.
"HOT WATER
"
After a steam outflow, always drain the machine.
"READY FOR USE "
By turning steam knob (9), these two messages
will be displayed:
USER MAIN TEN AN CE
IN STRUCTIO N S
"SELECT PRODUCT "
"READY FOR USE "
Ele ctro n ic p u m p co n tro l
IN CO RPO RATED SAFETY DEVICES
"STEAM
"
The machine switches off automatically as soon
as the water in the tank is under the minimum level
checked by a special water level indicator (73).
Fill the tank according to the procedure shown at
page 80.
Thishappensbecause the machine, asmentioned
before, can dispense two products at the same
time.
During hot wa ter dispensing, only the
progra mmed a mount is dispensed if the
corresponding programming is enabled. On the
contrary, dispensing should be stopped by
pressing again the selection key when the desired
amount is reached.
"READY FOR USE "
During the cappuccino dispensing, only the
progra mmed a mount is dispensed if the
corresponding programming is enabled. On the
contrary, dispensing should be stopped by
pressing again the selection key when the desired
cappuccino amount has been reached.
To program the cappuccino amount, it is
necessary to keep the corresponding selection
key pressed till the desired amount is reached.
"SELECT PRODUCT "
"READY FOR USE "
Thishappensbecause the machine, asmentioned
before, can dispense two products at the same
time.
Ele ctro n ic te m p e ra tu re a d ju stm e n t
Said adjustmentcontrolsthe correcttemperature to
brew coffee and to dispense hot water and steam.
Coffee brewing isautomaticallyinterrupted should
the water temperature be excessive (safety
thermostat and overheating safety device
activated).
If hot water only is dispensed, dispensing is faster
than when coffee is dispensed at the same time.
Direct steam/ hot water spout (7) on cup holder
grill (3) and slightly open knob (9), turning it
counterclockwise.
W ait until the remaining water has flown out of
the spout. Then, move the spout outwards and
plunge it deeply into the fluid to be heated.
Atte ntion: ca p p uccino a m ount ca n only
b e p ro g ra m m e d if th e co rre sp o n d in g
p ro g ra m m in g fu n ctio n is e n a b le d (se e
p a g e 8 3 ).
To program the hot water amount, it is necessary
to keep the corresponding selection key pressed
till the desired amount is reached.
An tig ra ve l d e vice
Even selected coffees may contain impurities.
To avoid damages, the coffee grinder is fitted
with an antigravel device against impurities.
Should gravel end up into the coffee grinder, you
will hear a strong and characteristic noise. Stop
the machine immediately otherwise the machine
will automatically stop within 20 seconds thanks
Atte n tio n : h o t w a te r ca n o n ly b e
p ro g ra m m e d if th e co rre sp o n d in g
p ro g ra m m in g fu n ctio n is e n a b le d (se e
p a g e 8 3 ).
3 8
3 7
For cappuccino dispensing, fit suction pipe (26) of
the Cappuccinatore (25) in a milk container or in
another container. To prevent milk container
deformation, pierce it on the top to allow air entry.
Place the cup under dispenser (27) and press the
Slowly open the steam/ hot water knob and heat
the fluid, with a circular movement from the
bottom to the top.
During the programming phase, the following
message will be displayed:
W hen the fluid has reached the desired tempe-
Download from Www.Somanuals.com. All Manuals Search And Download.
CLEANIN G AND MAINTEN AN CE O PERATIO NS
DESCALING
91
92
to the special electronic protection system.
Im p o rta n t: Do not start the machine before
the foreign body has been removed, otherwise
the motor may be damaged. Procedures: see
page 92, points 45-49.
operations. Unloose the screws and rinse the
dispensing tube thoroughly with hot water.
irre p a ra b le d a m a g e s to th e m a ch in e !
Assemble the grind ring support and make sure
the blue marks coincide.
W a rn in g : if the central unit is not correctly
fitted, the following message will be displayed:
From time to time, clean the machine casing with
a damp cloth and dry it.
5 0
Turn the adjustment ring clockwise, to make the
red marks coincide.
"BREW UNIT MISS "
The machine cannot dispense coffee.
Co ffe e g rin d e r
Cle a n in g a n d m a in te n a n ce o p e ra tio n s
Clean pre-ground coffee container (14) with the
aid of the brush supplied, whenever necessary.
5 1
Ge n e ra l cle a n in g
To ensure a good coffee quality and a longer
working life, always keep the machine clean.
Fit the adjustment lever on the ring, until it
coincides with the previously set grinding degree.
Ce n tra l u n it
Clean central unit (22) whenever the coffee
bean container is filled, or at least once a week.
Ca p p u ccin a to re
5 2
Switch off the machine and open service door
(19). Remove grounds coffee container (1).
To quickly clean the cappuccinatore, immerse
the suction pipe into warm water and let water
flow through it.
For a more accurate cleaning, remove the
cappuccinatore and open cover (29). Clean the
outside part with warm water and rinse it with
cleaned water.
Never fill the coffee grinder with water: it may
irreparably damage the machine!
Before cleaning the machine, turn off the main
switch, unplug the machine and wait until it
cools down.
4 1
4 5
Remove central unit (22), by holding the handle
and shortly pressing the PRESS key.
Clean the coffee beans container periodically;
th is o p e ra tio n sh o u ld b e a cco m p lish e d
b y a q u a lifie d te ch n icia n ! Unplug the
machine.
Empty the coffee container and unloose the two
fastening screws. Now, the container can be
removed and cleaned.
W ash the central unit with hot water; d o n o t
u se a n y so lve n t.
Do not immerse the machine into water or other
fluids: it may be irreparably damaged!
De sca lin g
4 2
Attention: The d esca ling op era tions m us
b e ca rrie d o u t w h e n th e m a ch in e
com p one nts a re cold .
Make sure there are no coffee residues on the
two steel filters: the upper filter can be removed
by unloosening and turning the plastic pin
anticlockwise using the tool supplied.
Dry thoroughly each central unit component, fit
the filter again and tighten it properly with the
screw .
4 6
Do not wash parts of the machine in the
dishwasher!
Carefully pull the adjustment lever upwards,
previously writing the set grinding degree.
Descaling removes limescale from all surfaces
and holes, thus ensuring a perfect operation of
valves, heating controls and other important
parts.
4 7
Turn the adjustment ring counterclockwise, until
the blue marks coincide.
Always handdry all parts of the machine, do not
dry them in the oven or microwave oven!
4 3
N o te : due to the complexity of the coffee
machine hydraulic circuit, the following descaling
cycles (automatic and standard) do not allow the
descaling of all tubes.
In fa ct, e a sily a cce ssib le co m p o n e n ts
su ch a s th e ce n tra l u n it (2 2 ) a n d its
p la stic co n n e ctio n a re e x clu d e d .
Remove coffee rest drawer (23) and clean it,
using a non-abrasive solvent.
Clean the service area thoroughly and fit the
coffee rest drawer again.
4 8
W a te r ta n k , d rip tra y , co ffe e g ro u n d s
co n ta in e r a n d co ffe e d isp e n se r
3 9
In order to keep the service area and the central
unit (22) clean, daily empty the coffee grounds
container (1), after machine use.
Now, it is possible to remove the grinding ring
from the machine, slightly pulling it upwards.
4 9
4 4
W ith the aid of a brush or a narrow vacuum
hose, clean both the gear box and the grind ring
support.
By holding the central unit by its handle, slide it
back into its original position, making sure it is
correctly engaged. Then close the door. Fit the
coffee grounds container again.
The machine must be descaled every 3-4 months,
depending on the water hardness degree.
A more frequent descaling is recommended
wherever the water hardness degree is very high.
To avoid dangerous delays to users, this machine
is supplied with a special control counter,
reminding the user to perform this operation,
according to the water hardness degree.
The water tank (11), drip tray (2), cup holder grill
(3) and coffee grounds container (1) should be
washed periodically, using a non-abrasive solvent
and drying them carefully.
Make sure the position of the grind ring does not shift.
To reassemble the coffee grinder, carry out the
reverse sequence, making sure the adjustment
ring has not been shifted during cleaning. If that
is the case, turn it until the blue mark coincide
with one of the three notches.
4 0
W h e n fittin g th e ce n tra l u n it, d o n o t
p re ss “ PRESS” b u tto n : it m a y ca u se
Coffee dispenser(4)maybe removed forcleaning
Download from Www.Somanuals.com. All Manuals Search And Download.
DESCALING
DESCALING
93
94
In this case, the following message will be
displayed:
Pour a discaling solution into the water tank
(according to the instructions on the product
package). Switchthe machine onthe programming
mode. Place a large container under the steam/
hot water spout and open slowly the steam knob.
The automatic descaling starts: Small amounts of
descaling solution are pumped into the circuit.
Then the pump stops to let the solution take effect.
During this phase, the following message is
displayed:
The following message will be displayed:
occurring as a result of the non-observance of
descaling procedures, improper use and non-
observance of any other instruction contained
herein. Maintain the manufacturer’s adjustment if
the water hardness degree is not known.
"DESCALING
"
"RESET DESCALING "
"NO
"
W hen this message is displayed, the machine
does not stop; however, it is suggested to descale
quickly the machine.
To cancel the message, see programming menu
indications, point 14.
By means of the same keys
, it is possible
Disp o sa l
to modify the value; Ye s or n o .
Machines which are no longer operational
should immediately be made non serviceable,
by cutting the power cord. Machines should be
delivered to a public disposal centre.
Switch off and unplug the machine if it will not be
used for long periods.
Through this reset operation, the internal counters
of the two water systems are reset and the
message DESCALE is erased.
The machine has been adjusted on a 25°òH
value, which causes the warning light to switch
on after 150 l approx.
If the function
"MACHINE IS
"DESCALING
"
"
"SIGN. DESCAL. "
Cut the supply power cord and deliver the
machine to a public collecting point.
Should it be necessary, the water hardness value
may be exactly programmed, following the
instructions shown at page 82.
After approx. 45 minutes, when the procedure is
accomplished, the following message will be
displayed:
is selected without the displayed message
De sca le, the following message will be
displayed:
"DESCALING
"FINISHED
"
"
The following adjustments are possible:
Ha rd n e ss 4: high water hardness, over 29°òH
(14°dH), i.e. 80 l water approx.
Ha rd n e ss 3:medium water hardness, approx.
20-29°òH (7-14°dH), approx. 150 l water
passage.
Ha rd n e ss 2:soft water, approx. 12-20°òH
(4-7°dH) approx. 300 l water passage
Ha rd n e ss 1:very soft water, less than 10°òH
(3°dH), approx. 500 l water passage
Should the machine not be used anymore,
switch it off and unplug it.
"QUANTITY WATER "
"NOT REACHED
"
Close the steam knob. The pump stops.
Press EN T button. A display message reminds
youto rinse awayanypossible descaling residues
from the machine.
Sta n d a rd d e sca lin g
Switch off the machine. Pour a descaling solution
into the water tank (according to the instructions
on the product package). Place a large container
under the steam/ hot water spout (7). Switch the
machine on by pressing the main switch, press
the hot water key and let the descaling solution
in the water tank pour out of the spout for 1 minute
approx.
Keep the machine in a dry place, far from the
reach of children.
Should the machine not be used for a long
period, keep it from dust and dirt
"RINSE MACHINE "
Remove water tank, rinse it accurately and fill it
with fresh water. Clean the machine using the
hot water knob and let the whole tank content
flow out. The following message willbe displayed:
Ma in te n a n ce
In hard water regions, a filter should be used both
to improve the coffee quality or to protect the
machine, thus reducing the descaling frequency.
Periodically check the machine working and
clean it in accordance to the instructions.
Press hot water key to complete the operation.
Switch the machine off and let the solution taking
effect for 5 minutes approx. Repeat this procedu-
re two or three times, to empty the water tank.
Tro u b le sh o o tin g
"RINSING
"FINISHED
"
"
N o te: for this purpose, use a descaling product
suitable for coffee machines.
N e ve r u se vin e g a r!
In case of failure, fault or suspected damage
following a fall, unplug the machine immediately.
Press the hot water key again. Go back to
programming function by pressing theEN T key.
Descaling can be performed in two ways:
As soon as descaling has been performed, rinse
the water tank (11) thoroughly and fill it with fresh
water.
Switch on the machine again and let water (2
l approx.) flow out of the steam/ hot water
dispensing tube in order to rinse away residues.
Au to m a tic d e sca lin g
Select this mode in the programming menu (see
page 84).
To fix problems, follow the instructions in the
table. Otherwise contact authorised personnel.
Only skilled personnel are authorised to repair
the machine. The user might incur serious injuries
should repairs not be properly carried out.
The ma nufa cturer declines a ny lia bility
whatsoever, should repairs fail to be carried out
according to the instructions contained in this
manual: Furthermore in these cases warranty
rights cannot be honored.
N o te: By pressing the ESC key, it is possible to
quit descaling procedure.
By means of keys
, move the asterisk at
Re se t d e sca lin g m e ssa g e
the end of the line on the menu itemDe sca lin g
and confirm the selection with the EN T key.
The following message will be displayed:
Inprogramming function, bypressing keys
,
Im p o rta n t:
move the asterisk till the end of the line on the menu
Sig n. De sca l and confirm the selection with
ENT button.
A periodic descaling ensures a correct machine
functioning and avoids expensive repairs. The
machine warranty does not cover damages
"13 DESCALING
"
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPO RTANT SAFEGUARDS
TRO UBLESHO O TING
78
95
Tro u b le
Po ssib le ca u se s
So lu tio n
IMPO RTANT SAFEGUARDS
No message is displayed
The machine is not getting power Turn the main switch on, check
plug and fuse
W hen using your coffee maker, basic safety
precautions should always be followed, in-
cluding the followed to reduce the risk of
fire, electric shock, and/ or injury to persons
including the following:
1 ● Read all instructions.
2 ● Do not touch hot surfa ces. Use
handles or knobs.
3 ● To protect against electric shock, do
not place cord, plug or appliance in water
or other liquid.
4 ● Close supervision is necessary when
any appliance is used by or near children.
5 ● Unplug from the outlet when not in
use and before cleaning. Allow to cool
before putting on or taking off parts, and
before cleaning the appliance.
damaged in any manner. Return appliance
to a n a uthorised service fa cility for
examination, repair or adjustment.
7 ● The use of a n a cce ssory not
evaulated for use with this appliance may
cause injuries.
The service door is open
Close the service door is
Properly fit and lock the central
unit
The automatic coffee brewing
does not start
BREW UNITMISS.
Clean the central unit (see page
91)
BREW UNITBLO CK.
8 ● Do not use outdoors.
9 ● Do not let cord hang over edge or
table or counter, or touch hot surfaces.
10 ● Do not place on or near a hot gas
or electric burner, or in a heated oven.
11 ● Always attach plug to appliance first,
then plug cord into the wa ll outlet. To
disconnect, turn a ny control to the off
position, then remove plug from wall outlet.
12 ● Use this a pplia nce only for its
intended use as described in this manual.
13 ● Keep the cord away from heated
surfaces.
Fill with water or coffee beans
and restart the cycle
W ATERTANK
EMPTY
COF. BEANS
EMPTY
The automatic coffee brewing
does not start
Fit the coffee grounds container
properly
DREGDRAW ER MISS.
Service the coffee grinder (see
page 92)
GRINDER BLO CKED
Steam and hot water are not The steam/ hot water spout hole
Clear the hole with the aid of a
thin needle
dispensed
is clogged
6 ● Do not operate any appliance with
a da ma ged cord or plug or a fter the
a pplia nce ma lfunctions, or ha s been
Coffee is dispensed too quickly Grinding too coarse
Adjust the grinder on a finer
grinding, e.g. from 5 to 3
Adjust the grinder on a coarser
grinding, e.g. from 5 to 7
The central unit filter is clogged
Clean the filter
Coffee is dispensed too slowly Grinding too fine
SAVE THESE INSTRUCTIO NS
Coffee is not hot enough
The cup has not been preheated Heat the cup on the heating
plate
Coffee is not creamy enough
The coffee blend is not suitable
or is not fresh. Grinding is not
correct (too fine or too coarse)
Try another coffee blend
WARNING
The machine coffee brewing is Descaling the machine
reduced, it takes longer to heat
Desca le the ma chine, a s
described at page 92
RISK OF FIRE OR ELECTRIC SHOCK
DO NOT OPEN
and the dispensing isnotsufficient
The central unit cannot be The central unit has not been Switch the machine on, close
removed
correctly positioned
the service door, fit the coffee
grounds container and wait until
the machine resets.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REPAIR SHOULD BE DONE BY AUTORIZED SERVICE PERSONNEL ONLY
Download from Www.Somanuals.com. All Manuals Search And Download.
|