®
ENFORCER
VIDEO
16-Port Passive
Transceiver Hub
EVT-PH16-4T2
Range: Up to 2,000’ (6100m)
ꢀ
ꢀ
Video
Data
Surge Protection
The EVT-PH16-4T2 allows up to 16 color or monochrome CCTV
cameras to be connected via inexpensive CAT 5e unshielded
twisted pair (UTP) cable to a video switcher or multiplexer. It cuts
the cost and complexity of security networks by eliminating the
need to run expensive coax cable to multiple CCTV cameras. A
built-in RS485 port allows the transmission of PTZ (pan/tilt/zoom)
signals to up to 16 CCTV cameras or other devices.
Typical Installations:
Data
Video
Video Out
Features:
Data
In
Connects up to 16 CCTV cameras using
Video in / data
low-cost CAT 5e UTP cable to a central location.
Works in conjunction with passive video or active video baluns.
Works with full-motion CCTV cameras up to 2,000 feet (610
meters) away via passive video baluns.
Feeds the camera signals to nearly any standard video multiplexer
or switcher or digital video recorder via coax cables.
Built-in RS485 port connects to a PC or other device to control the
pan, tilt, and zoom (PTZ) of up to 16 remote cameras or devices.
Compact enclosure, only 1U (1.75 inches) high. Mounts in a
standard 19-inch rack.
Monitor
Built-in transient protection and interference technology for
existing UTP cables.
Complete passive operation, no power required.
Specifications:
Dimensions:
Video input ports
Video input cables
16 x 2-wire ports on removable terminal blocks
Unshielded twisted pair (UTP), min. CAT 2. Use CAT 5e or
better for best range and video signal.
17.25” x 6.75” x 1.75” (482 x 170 x 44 mm)
Video output ports
16 x BNC connectors, each 1Vp-p, 75 ohms.
Video output cables Coax.
Data input
Data output
Power
1 x 2-wire port, for PTZ control signals from a PC.
16 x 2-wire ports on removable terminal blocks.
No power required.
Surge protection
Size
Weight
Video and data
1U form factor, 17.25” x 6.75” x 1.75” (482 x 170 x 44 mm)
4.9 lb. (2.2kg)
Material
Steel cabinet, black matte finish.
Balunse.pmd
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
SECO-LARM® U.S.A., Inc.,
16842 Millikan Avenue, Irvine, CA 92606
Tel: 1-800-662-0800 (Domestic U.S. & Canada)
Tel: 1-949-261-2999 (California & International)
Download from Www.Somanuals.com. All Manuals Search And Download.
|