OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
BRUSHCUTTER ATTACHMENT
ACCESSOIRE DE DÉBROUSSAILLEUSE
ACCESORIO PARA DESBROZADORA
RY15702
Your brushcutter attachment has been engineered and manufactured to our high standard for dependability, ease of opera-
tion, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using
this product.
Thank you for your purchase.
SAVE THIS MANUAL FOR FUTURE REFERENCE
Votre accessoire de débroussailleuse a été conçu et fabriqué
conformément aux strictes normes de fiabilité, simplicité d’emploi
et sécurité d’utilisation. Correctement entretenu, il vous donnera
des années de fonctionnement robuste et sans problème.
Su nuevo accesorio para desbrozadora ha sido diseñado y
fabricado de conformidad con estrictas normas de calidad para
brindar fiabilidad, facilidad de uso y seguridad para el operador.
Con el debido cuidado, le brindará muchos años de sólido y
eficiente funcionamiento.
AVERTISSEMENT : Pour réduire les risques de
blessures, l’utilisateur doit lire et veiller à bien comprendre le
manuel d’utilisation avant d’employer ce produit.
ADVERTENCIA: Para reducir el riesgo de lesiones,
el usuario debe leer y comprender el manual del operador antes
de usar este producto.
Merci de votre achat.
Le agradecemos su compra.
CONSERVER CE MANUEL POUR
FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL PARA
FUTURAS CONSULTAS
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL SAFETY RULES
medication. A moment of inattention while operating
power tools may result in serious personal injury.
WARNING:
Do not operate in poor lighting.
Read and understand all instructions. Failure to fol-
low all instructions listed below, may result in electric
shock, fire, and/or serious personal injury.
Do not overreach. Keep proper footing and balance at all
times. Proper footing and balance enables better control
of the tool in unexpected situations.
SAVE THESE INSTRUCTIONS
Keep all parts of your body away from any moving part.
Read these instructions and the instructions for the power
Do not touch areas around the muffler or cylinder of the
power head. These parts get hot from operation. Failure
to heed this warning could result in possible serious
personal injury.
head thoroughly before using the attachment.
Know the tool. Read and understand the operator’s
manual and observe the warnings and instruction labels
affixed to the tool.
Always stop the engine and remove the spark plug wire
before making any adjustments or repairs except for
carburetor adjustments.
Do not allow children or untrained individuals to use this
unit.
Inspect unit before each use for loose fasteners and
damaged or missing parts. Correct before using the
attachment. Failure to do so can cause serious injury.
Wear safety glasses or goggles that are marked to comply
with ANSI Z87.1 standard and hearing protection when
operating this unit.
Use only original manufacturer’s replacement parts.
Failure to do so may cause poor performance, possible
injury, and will void your warranty.
Wear heavy long pants, a long-sleeved shirt, boots, and
gloves. Do not wear loose fitting clothing, short pants,
jewelry of any kind, or go barefoot.
Do not, under any circumstance, use any attachment or
accessory on this product, which was not provided with
the product, or identified as appropriate for use with this
product in the operator’s manual.
Secure long hair so it is above shoulder level to prevent
entanglement in any moving parts.
Keep all bystanders, children, and pets at least 50 ft.
away. Bystanders should be encouraged to wear eye
protection.
Avoid dangerous environments. Do not use the attachment
in damp or wet locations. Do not use in rain.
Stay alert, watch what you are doing, and use common
sense when operating a power tool. Do not use tool
while tired or under the influence of drugs, alcohol, or
Use the right attachment. Do not use attachment for any
job except that for which it is intended.
SPECIFIC SAFETY RULES
Ensure handle is mounted in accordance with the assem-
Do not attempt to touch or stop blade when it is rotating.
bly instructions in this manual.
A coasting blade can cause injury while it continues
to spin after the engine is stopped or throttle trigger
released.
Do not attach blade without proper installation of all
required parts. Failure to use proper parts can cause the
blade to fly off and seriously injure the operator and/or
bystanders.
Maintain proper control until the blade has completely
stopped rotating.
Always use a blade in good condition. A worn blade is
Replace any blade that has been bent, warped, cracked,
chipped, or damaged. Always make sure blade is installed
correctly and securely fastened before each use. Failure
to do so can cause serious injury.
more likely to snag and thrust.
After engine stops, keep rotating blade in thicker weeds
or pulpy stalks until it stops.
Do not operate the brushcutter unless the brushcutter
Use only the manufacturer’s replacement TRI-ARC® blade
intended for use on this brushcutter. Do not use any other
blade. To install any other brand blade or cutting head to
this brushcutter can result in serious personal injury.
The TRI-ARC® blade is suited for cutting thicker weeds
or pulpy stalks only. Do not use for any other purpose.
Never use the TRI-ARC® blade to cut woody brush.
guard is firmly secured in place and in good condition.
Use heavy gloves when operating the brushcutter and
when installing or removing blades.
Always stop the engine and remove the spark plug wire
before attempting to remove any obstruction caught or
jammed in the blade or before removing and installing
the blade.
3 — English
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFIC SAFETY RULES
Exercise extreme caution when using the blade with this
Always wear the shoulder harness when using the brush-
unit. Blade thrust is the reaction that may occur when
the spinning blade contacts anything it cannot cut. This
contact may cause the blade to stop for an instant, and
suddenly “thrust” the unit away from the object that was
hit. This reaction can be violent enough to cause the
operator to lose control of the unit. Blade thrust can occur
without warning if the blade snags, stalls, or binds. This is
more likely to occur in areas where it is difficult to see the
material being cut. For cutting ease and safety, approach
the weeds being cut from the right to the left. In the event
an unexpected object or woody stock is encountered,
this approach could minimize the blade thrust reaction.
cutter and adjust to a comfortable operating position.
Maintain a firm grip on both handles while cutting with a
blade. Keep the blade away from body and below waist
level. Never use the brushcutter with the blade located
30 in. or more above the ground level.
To prevent electrical shock or serious personal injury, do
not use this product with any electric power head.
Save these instructions. Refer to them frequently and
use them to instruct others who may use this product.
If you loan someone this product, loan them these
instructions also to prevent misuse of the product and
possible injury.
Never cut any material over 1/2 in. diameter.
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
NAME
EXPLANATION
Safety Alert Symbol
Precautions that involve your safety.
To reduce the risk of injury, user must read and understand
operator’s manual before using this product.
Read the Operator’s Manual
Eye and Hearing Protection
Keep Bystanders Away
Ricochet
Wear eye protection which is marked to comply with ANSI
Z87.1 as well as hearing protection when operating this
equipment.
Keep all bystanders at least 50 ft. away.
Thrown objects can ricochet and result in personal injury
or property damage.
Beware of blade thrust. Products authorized for blade use will
display this symbol to warn of blade thrust.
Blade Thrust
4 — English
Download from Www.Somanuals.com. All Manuals Search And Download.
SYMBOLS
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL
SIGNAL
MEANING
Indicates an imminently hazardous situation, which, if not avoided, will result
in death or serious injury.
DANGER:
Indicates a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.
WARNING:
CAUTION:
CAUTION:
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in property
damage.
SERVICE
WARNING:
Servicing requires extreme care and knowledge and should
be performed only by a qualified service technician. For
service we suggest you return the product to your nearest
AUTHORIZED SERVICE CENTER for repair. When
servicing, use only identical replacement parts.
To avoid serious personal injury, do not attempt
to use this product until you read thoroughly and
understand completely the operator’s manual. If you
do not understand the warnings and instructions in the
operator’s manual, do not use this product. Call Ryobi
customer service for assistance.
WARNING:
The operation of any power tool can result in foreign objects being thrown into your eyes, which can
result in severe eye damage. Before beginning power tool operation, always wear safety goggles or
safety glasses with side shields and, when needed, a full face shield. We recommend Wide Vision Safety
Mask for use over eyeglasses or standard safety glasses with side shields. Always use eye protection
which is marked to comply with ANSI Z87.1.
SAVE THESE INSTRUCTIONS
5 — English
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
PRODUCT SPECIFICATIONS
Weight ................................................................... 3.25 lbs.
Blade Cutting Width ..................................................... 8 in.
KNOW YOUR BRUSHCUTTER ATTACHMENT
See Figure 1.
The safe use of this product requires an understanding of the information on the product and in this operator’s manual as
well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating
features and safety rules.
ASSEMBLY
UNPACKING
This product requires assembly.
ATTACHING THE BRUSHCUTTER
ATTACHMENT TO THE POWER HEAD
See Figure 2.
Carefully remove the items from the box. Make sure that
all items listed in the packing list are included.
Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
If any parts are damaged or missing, please call
1-800-860-4050 for assistance.
WARNING:
Never attach or adjust any attachment while power head
is running. Failure to stop the engine may cause serious
personal injury.
The brushcutter attachment connects to the power head by
means of a coupler device.
PACKING LIST
Ryobi® Expand-It™ Brushcutter Attachment
J-Handle Assembly
Remove the hanger cap from the attachment.
Loosen the knob on the coupler of the power head
shaft.
Shoulder Harness Assembly
Hardware Bag
Push in the button located on the brushcutter attachment.
Align the button with the guide recess on the extension
shaft coupler and slide the two shafts together. Rotate
attachment until button locks into the positioning hole.
Gear Head Locking Tool
Operator’s Manual
Tighten the knob securely.
WARNING:
NOTE: If the buttons do not release completely in the
positioning holes, the shafts are not locked into place.
Slightly rotate from side to side until the button is locked
into place.
If any parts are damaged or missing do not operate this
product until the parts are replaced. Failure to heed this
warning could result in serious personal injury.
NOTE: Use only the specified positioning hole for this
attachment.
WARNING:
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
Be certain the knob is fully tightened before operating
equipment. Check it periodically for tightness during use
to avoid serious injury.
REMOVING THE ATTACHMENT FROM THE
POWER HEAD
For removing or changing the attachment:
WARNING:
Donotconnecttopowerheaduntilassemblyiscomplete.
Failure to comply could result in accidental starting and
possible serious personal injury.
Stop the engine.
Loosen the knob.
Push in the button and twist the shafts to remove and
separate ends.
6 — English
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
INSTALLING THE SHOULDER HARNESS AND
STRAP HANGER
See Figure 4.
ATTACHING THE “J” HANDLE
See Figure 3.
The “J” handle must be used to ensure the best control
and maximize operator safety when using the brushcutter.
Pull apart the ends of the shoulder harness hanger to
expand slightly.
Hold the top and bottom clamp snugly in position on the
shaft housing so that handle will be located to the opera-
tor’s left.
Slide the hanger over the power head shaft immediately
behind the “J” handle.
Insert the end of the handle between the clamps.
Squeeze hanger ends together to retighten.
Align the bolt holes and push the long bolt (1/4-20 x
1-1/2 in.) through the handle side. Place short bolt (1/4-20
x 1 in.) through opposite side of clamp.
Install the bolt, lock washer, and lock nut to secure.
Connect the latch on the shoulder harness to the strap
hanger.
Install flat washers, lock washers, and hex nuts to hold
the assembly in place.
After assembly is complete, adjust the position of the
handle for best balance and comfort.
Tighten the long bolt, then the short bolt.
OPERATION
OPERATING THE BRUSHCUTTER
See Figures 5 - 6.
WARNING:
Hold the brushcutter with your right hand on the rear handle
and your left hand on the “J” handle. Keep a firm grip with
both hands while in operation. Brushcutter should be held
at a comfortable position with the trigger handle about hip
height. Maintain your grip and balance on both feet. Posi-
tion yourself so that you will not be drawn off balance by the
kickback reaction of the cutting blade.
Do not allow familiarity with this product to make you
careless.Rememberthatacarelessfractionofasecondis
sufficient to inflict serious injury.
WARNING:
Always wear safety goggles or safety glasses with side
shields when operating power tools. Failure to do so
could result in objects being thrown into your eyes
resulting in possible serious injury.
Adjust the shoulder harness to position the brushcutter at
a comfortable operating position and to ensure that the
shoulder harness will reduce the risk of operator contact
with the blade.
Ensure the blade has come to a complete stop before setting
the brushcutter down.
WARNING:
BLADE THRUST
Do not use any attachments or accessories not
recommended by the manufacturer of this product. The
use of attachments or accessories not recommended
can result in serious personal injury.
Exercise extreme caution when using the blade with this
unit. Blade thrust is the reaction that may occur when the
spinning blade contacts anything it cannot cut. This contact
may cause the blade to stop for an instant and suddenly
“thrust” the unit away from the object that was hit. This re-
action can be violent enough to cause the operator to lose
control of the unit. Blade thrust can occur without warning
if the blade snags, stalls, or binds. This is more likely to oc-
cur in areas where it is difficult to see the material being cut.
For cutting ease and safety, approach the weeds being cut
with the brushcutter from the right to the left. In the event
an unexpected object or woody stock is encountered, this
practice could minimize the blade thrust reaction.
APPLICATIONS
You may use this product for the purpose listed below:
Cutting thicker weeds and pulpy stalks only
WARNING:
To avoid burns from hot surfaces, never operate unit with
the bottom of the engine above waist level.
7 — English
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
TRI-ARC® BLADE
Inspect and clear the area of any hidden objects such as
glass, rocks, concrete, fencing, wire, wood, metal, etc.,
which can be thrown or entangled in the blade.
The TRI-ARC® blade is suited only for thicker weeds and
pulpy stalks. When the blade becomes dull, it can be turned
over to extend the life of the blade. Do not sharpen the TRI-
ARC® blade.
Never use blades near sidewalks, fencing, posts, build-
ings or other immovable objects.
Use only TRI-ARC® blade, part number 06297, available at
your service center.
Never use a blade after hitting a hard object without first
inspecting it for damage. Do not use if any damage is
detected.
CUTTING TECHNIQUE - BLADE
WARNING:
The unit is used for cutting from the right to the left in a
broad sweeping action from side to side.
Use only the TRI-ARC® blade. To install any other brand
blade or cutting head to this brushcutter could result in
serious personal injury.
Extreme care must be taken when using blades to ensure
safe operation. For safe operation when using the blade,
refer to Specific Safety Rules earlier in this manual.
Always hold brushcutter on your right side with both hands
when operating. Use a firm grip on both handles.
Maintain your grip and balance on both feet. Position
yourself so that you will not be drawn off balance by the
kickback reaction of the cutting blade.
MAINTENANCE
GENERAL MAINTENANCE
WARNING:
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
When servicing, use only identical replacement parts.
Use of any other parts may create a hazard or cause
product damage.
WARNING:
WARNING:
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken, or de-
stroy plastic, which may result in serious personal injury.
Always wear safety goggles or safety glasses with side
shields during power tool operation or when blowing
dust. If operation is dusty, also wear a dust mask.
Only the parts shown on the parts list are intended to be
repaired or replaced by the customer. All other parts should
be replaced at an authorized service center.
WARNING:
Before inspecting, cleaning, or servicing the machine,
shut off engine, wait for all moving parts to stop, and
disconnect spark plug wire and move it away from spark
plug. Failure to follow these instructions can result in
serious personal injury or property damage.
REPLACING THE TRI-ARC® BLADE
See Figures 7 - 8.
To remove blade:
Align the slot in the flanged washer with the slot in the
gear head.
Place the gear head locking tool through the slot in the
flanged washer and gear head.
Remove the blade nut by turning it clockwise (left-handed
threads).
8 — English
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Remove the cupped washer and the blade.
To install blade:
ATTACHING THE STORAGE HANGER
See Figure 9.
Place flanged washer over the gear shaft with the hollow
side toward the brushcutter guard.
There are two ways to hang the attachment for storage.
To use the hanger cap, push in the button and place the
hanger cap over the end of the attachment shaft. Slightly
rotate the cap from side to side until the button locks into
place.
Center the blade on the flanged washer, making sure the
blade fits flat and the raised hub goes through the hole
in the blade.
Install the cupped washer with the raised center away
from the blade.
Place the blade nut onto the gear shaft.
The secondary hole in the attachment shaft can be used
for hanging purposes as well.
STORING THE ATTACHMENT
Clean the attachment thoroughly and lubricate before
Insert the head locking tool through the flanged washer
and gear head.
Install the blade nut by turning it counterclockwise (left-
handed threads).
Tighten the blade nut and torque to 120 in.lb. minimum
(finger tight plus 1/2 turn).
storing.
Store the attachment in a dry, well-ventilated place that
is inaccessible to children.
Keep away from corrosive agents such as garden chemi-
cals and de-icing salts.
MAKE THE MOST OF YOUR PURCHASE!
Your product has been fully tested prior to shipment
to ensure your complete satisfaction.
For any questions about operating or maintaining
your product, call the Ryobi Help Line!
To register your Ryobi product by regular mail, please print the following information on a 3 in. x 5 in. card or
standard postcard: your name, mailing address, phone numbers, email address, Ryobi product(s) purchased
with item number from package, and serial number for each product. Mail the card to: Techtronic Industries
North America, Inc., Attn. Ryobi Registration, 1428 Pearman Dairy Road, Anderson, SC 29625.To receive infor-
mation on our company and products, please include the following statement on your registration card: “Send
me information on your products and company using the contact information I am providing with this product
registration.”
9 — English
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
LIMITED WARRANTY STATEMENT
A. Tune-ups – Spark Plugs, Carburetor, Carburetor
Adjustments, Ignition, Filters
Techtronic Industries North America, Inc., warrants to the
original retail purchaser that this RYOBI® brand outdoor
product is free from defect in material and workmanship
and agrees to repair or replace, at Techtronic Industries
North America, Inc.’s, discretion, any defective product
free of charge within these time periods from the date of
purchase.
B. Wear items – Bump Knobs, Outer Spools, Cutting
Lines, Inner Reels, Starter Pulleys, Starter Ropes, Drive
Belts,Tines,FeltWashers,HitchPins,MulchingBlades,
Blower Fans, Blower and Vacuum Tubes, Vacuum Bag
and Straps, Guide Bars, Saw Chains
Techtronic Industries North America, Inc., reserves the
right to change or improve the design of any RYOBI® brand
outdoorproductwithoutassuminganyobligationtomodify
any product previously manufactured.
Three years if the product is used for personal, family
or household use;
90 days, if used for any other purpose, such as
commercial or rental.
ALL IMPLIED WARRANTIES ARE LIMITED IN DURATION
TO THE STATED WARRANTY PERIOD. ACCORDINGLY,
ANY SUCH IMPLIED WARRANTIES INCLUDING
MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, OR OTHERWISE, ARE DISCLAIMED IN
THEIR ENTIRETY AFTER THE EXPIRATION OF THE
APPROPRIATE TWO-YEAR, ONE-YEAR, OR NINETY-
DAY WARRANTY PERIOD. TECHTRONIC INDUSTRIES
NORTH AMERICA, INC.’S, OBLIGATION UNDER THIS
WARRANTYISSTRICTLYANDEXCLUSIVELYLIMITEDTO
THE REPAIR OR REPLACEMENT OF DEFECTIVE PARTS
AND TECHTRONIC INDUSTRIES NORTH AMERICA,
INC., DOES NOT ASSUME OR AUTHORIZE ANYONE
TO ASSUME FOR THEM ANY OTHER OBLIGATION.
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE
LIMITATION MAY NOT APPLY TO YOU. TECHTRONIC
INDUSTRIES NORTH AMERICA, INC., ASSUMES NO
RESPONSIBILITY FOR INCIDENTAL, CONSEQUENTIAL,
OR OTHER DAMAGES INCLUDING, BUT NOT LIMITED
TO, EXPENSE OF RETURNING THE PRODUCT TO AN
AUTHORIZED RYOBI SERVICE CENTER AND EXPENSE
OFDELIVERINGITBACKTOTHEOWNER, MECHANIC’S
TRAVEL TIME, TELEPHONE OR TELEGRAM CHARGES,
RENTAL OF A LIKE PRODUCT DURING THE TIME
WARRANTY SERVICE IS BEING PERFORMED, TRAVEL,
LOSS OR DAMAGE TO PERSONAL PROPERTY, LOSS
OF REVENUE, LOSS OF USE OF THE PRODUCT,
LOSS OF TIME, OR INCONVENIENCE. SOME STATES
DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY
TO YOU.
This warranty extends to the original retail purchaser
only and commences on the date of the original retail
purchase.
Any part of this product found in the reasonable judgment
ofTechtronicIndustriesNorthAmerica, Inc. tobedefective
in material or workmanship will be repaired or replaced
withoutchargeforpartsandlaborbyanauthorizedservice
center for RYOBI® brand outdoor products (Authorized
Ryobi Service Center).
Theproduct,includinganydefectivepart,mustbereturned
to an authorized Ryobi service center within the warranty
period.Theexpenseofdeliveringtheproducttotheservice
center for warranty work and the expense of returning it
back to the owner after repair or replacement will be paid
by the owner. Techtronic Industries North America, Inc.’s,
responsibility in respect to claims is limited to making the
required repairs or replacements and no claim of breach of
warrantyshallbecauseforcancellationorrescissionofthe
contractofsaleofanyRYOBI® brandoutdoorproduct.Proof
of purchase will be required by the dealer to substantiate
any warranty claim. All warranty work must be performed
by an authorized service dealer.
This warranty is limited to ninety (90) days from the date
of original retail purchase for any RYOBI® brand outdoor
product that is used for rental or commercial purposes, or
any other income-producing purpose.
This warranty does not cover any product that has been
subject to misuse, neglect, negligence, or accident, or that
has been operated in any way contrary to the operating
instructions as specified in this operator’s manual. This
warranty does not apply to any damage to the product that
is the result of improper maintenance or to any product
that has been altered or modified. The warranty does not
extendtorepairsmadenecessarybynormalwearorbythe
use of parts or accessories which are either incompatible
withtheRYOBI® brandoutdoorproductoradverselyaffect
its operation, performance, or durability. In addition, this
warranty does not cover:
This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.
ThiswarrantyappliestoallRYOBI® brandoutdoorproducts
manufacturedbyorforTechtronicIndustriesNorthAmerica,
Inc., and sold in the United States and Canada.
To locate your nearest Authorized Ryobi Service Center,
dial 1-800-860-4050.
10 — English
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
11 — English
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED VIEW AND PARTS LIST
VUE ÉCLATÉE ET LISTE DES PIÈCES
VISTA DESARROLLADA Y LISTA DE PIEZAS
11
12
25
17
10
8
19
9
20
18
22
13
7
6
5
24
23
16
4
3
15
21
15
21
14
1
2
12
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED VIEW AND PARTS LIST
VUE ÉCLATÉE ET LISTE DES PIÈCES
VISTA DESARROLLADA Y LISTA DE PIEZAS
KEY NO.
Pièce Num.
Núm. Ref.
PART NO.
Num. Réf.
Núm. Pieza
QTY.
Qté.
Cant.
DESCRIPTION
DESCRIPCIÓN
DESCRIPTION
Blade Nut, Left-handed Threads
(M8)
Écrou de lame, filetage à gauche
(M8)
Tuerca de la cuchilla, rosca izqui-
erda (M8)
1
678018001
1
Rondelle bombée
Lame (Tri-Arc®)
Rondelle bombée
Hoja (Tri-Arc®)
2
3
4
638017001 Cupped Washer
638006004 Blade (Tri-Arc®)
678011001 Flanged Washer
1
1
1
Rondelle à épaulement
Arandela de brida
Tornillo (10-24 x 1/2 pulg., de
cabeza hexagona con arandela de
disco)
Screw (10-24 x 1/2 in. Hex Head Vis (10-24 x 1/2 po, à tête
hexagonale avec rondelle)
5
660737001
3
w/Dish Washer)
Pare-débris de la débroussailleuse Protección de la desbrozadora
6
7
8
638120004 Brushcutter Guard
308210001 Gear Head Assembly
660641001 Screw (10-24 x 5/8 in.)
1
1
1
Ensemble carter d’engrenages
Vis (10-24 x 5/8 po)
Conjunto de cabezal de engranajes
Tornillo (10-24 x 5/8 pulg.)
Vis (1/4 po-20 x 1-1/4 po, tête
hexagonale)
Tornillo (1/4 pulg.-20 x 1-1/4 pulg.,
cabeza hexagonal)
Screw (1/4 in.-20 x 1-1/4 in., Hex
9
660642001
120530012
1
1
Head)
Boom Assembly (Includes Key
No. 12 and 25)
Conjunto del brazo (incl. pzas.
núms. ref. 12 y 25)
Perche (incl. pièces no. 12 et 25)
10
Capuchon de suspension
Étiquette d’avertissement
Collier de poignée
Tapa de suspensión
11
12
13
14
15
16
17
518019002 Hanger Cap
1
1
2
2
2
1
1
Etiqueta de advertencia
940657027 Warning Label
638014001 Handle Bar Clamp
678016001 Hex Nut (1/4 in.-20)
678013001 Washer
Abrazadera del mango
Écrou hexagonal (1/4 po-20)
Rondelle
Conjunto del perno (M6 x 40 mm)
Conjunto del perno (M6 x 25 mm)
Mango “J” y empuñadura
Colgador de abrazadera
Poignée en « J » et poignée rem-
bourrée
308046001 J-Handle and Grip
308224001 Strap Hanger
Dispositif d’accrochage
Bandoulière
Correa para el hombro
18
19
308487001 Shoulder Harness Assembly
678020001 Head Locking Tool
1
1
Herramienta de fijación del cabezal
de engranajes
Outil de blocage de tête de coupe
Entretoise
Espaciador
20
21
22
23
24
25
518367001 Spacer
1
2
1
1
1
1
Rondelle de blocage (1/4 po)
Boulon (1/4 po-20 x 1 po)
Boulon (1/4 po-20 x 1-1/2 po)
Étiquette de logo
Arandela de seguridad (1/4 pulg.)
Perno (1/4 pulg.-20 x 1 pulg.)
Perno (1/4 pulg.-20 x 1-1/2 pulg.)
Etiqueta logotipo
678012001 Lock Washer (1/4 in.)
660643002 Bolt (1/4 in.-20 x 1 in.)
660643001 Bolt (1/4 in.-20 x 1-1/2 in.)
940705021 Logo Label
Étiquette de logo
Etiqueta logotipo
940726013 Logo Label
Manual d’utilization
Manual del oprerador
987000382 Operator’s Manual
13
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATOR’S MANUAL
MANUEL D’UTILISATION / MANUAL DEL OPERADOR
BRUSHCUTTER ATTACHMENT
ACCESSOIRE DE DÉBROUSSAILLEUSE/ ACCESORIO PARA
DESBROZADORA
RY15702
• PARTS AND SERVICE
Prior to requesting service or purchasing replacement parts, please obtain your model
and serial number from the product data plate.
WARNING:
Theengineexhaustfromthisproduct
contains chemicals known to the
State of California to cause cancer,
birth defects, or other reproductive
harm.
RY15702
• MODEL NO. ______________________SERIAL NO. __________________________
• HOW TO OBTAIN REPLACEMENT PARTS:
1-800-860-4050. Replacement parts can also be obtained at one of our Authorized
Service Centers.
CALIFORNIA PROPOSITION 65
• HOW TO LOCATE AN AUTHORIZED SERVICE CENTER:
ing 1-800-860-4050.
AVERTISSEMENT :
• HOW TO OBTAIN CUSTOMER OR TECHNICAL SUPPORT:
To obtain Customer or Technical Support please contact us at 1-800-860-4050.
Les gaz d’échappement de ce produit
contiennent des produits chimiques
identifiésparl’étatdeCaliforniecomme
causes de cancer, de malformations
congénitales et d’autres troubles de
l’appareil reproducteur.
• PIÈCES ET SERVICE
Avant de faire la demande de service ou l’achat de pièces de remplacement, veuillez
obtenir le numéro de série du modèle à partir de la plaque de données du produit.
RY15702
• NUMÉRO DE MODÈLE ____________NUMÉRO DE SÉRIE___________________
PROPOSITION 65 DE L’ÉTAT DE
CALIFORNIE
• COMMENT OBTENIR LES PIÈCES DE REMPLACEMENT :
Les pièces de remplacement peuvent être achetées en ligne sur le site
peuvent être obtenues à un de nos centres de service autorisés.
• COMMENT TROUVER UN CENTRE DE SERVICE AUTORISÉ :
com ou en téléphonant au 1-800-860-4050.
ADVERTENCIA:
Las emanaciones provenientes del
escape del motor de este producto
contienen sustancias químicas
reconocidasporelestadodeCalifornia
como causantes de cáncer, defectos
congénitos y otras afecciones del
aparato reproductor.
•
COMMENT OBTENIR DE L’AIDE EN CONTACTANT LE SERVICE À LA
CLIENTÈLE :
Pour contacter le service à la clientèle pour une question technique ou pour tout autre
renseignement, veuillez nous téléphoner au 1-800-860-4050.
• PIEZAS DE REPUESTO Y SERVICIO
Antes de solicitar servicio técnico o comprar piezas de repuesto, obtenga su modelo
y número de serie de la placa de datos del producto.
CALIFORNIA-PROPUESTADELEY
NÚM. 65
RY15702
• NÚMERO DE MODELO ____________NÚMERO DE SERIE___________________
Ryobi® is a registered trademark of Ryobi
Limited used under license.
• CÓMO OBTENER PIEZAS DE REPUESTO:
Las piezas de repuesto se pueden comprar en nuestro sitio en la red mundial, en la
también se pueden obtener en uno de nuestros Centros de Servicio Autorizados.
Ryobi® est une marque déposée de Ryobi
Limited utilisée sous licence.
• CÓMO LOCALIZAR UN CENTRO DE SERVICIO AUTORIZADO:
Puede encontrar los Centros de Servicio Autorizados visitando nuestro sitio en la red
Ryobi® es una marca comercial registrada
de Ryobi Limited y es empleada mediante
autorización.
• CÓMO OBTENER SERVICIO O ASISTENCIA TÉCNICA AL CONSUMIDOR:
Para obtener Servicio o Asistencia Técnica al Consumidor, sírvase comunicarse con
nosotros llamando al 1-800-860-4050.
TECHTRONIC INDUSTRIES NORTH AMERICA, INC.
987000-382
1428 Pearman Dairy Road, Anderson, SC 29625 USA
7-26-10 (REV:02)
Download from Www.Somanuals.com. All Manuals Search And Download.
|