Russound Car Video System VMR1 User Guide

Safety Precautions  
Specifications  
VMR1  
Device type: Single-gang in-wall Decora®-style  
1. Read these instructions.  
2. Keep these instructions  
3. Heed all warnings.  
Input connector: 110 punch-down block  
System cable: CAT-5e  
Video Matrix Receiver  
Instruction Manual  
Maximum cable length: 300 ft (90 m)  
Output connectors: (3) RCA jacks for component video  
Video resolution: Up to 1080p  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with dry cloth.  
Dimensions: 1.75” W x 4.17” H x 1.31” D  
(4.4 x 10.6 x 3.3 cm)  
Weight: 2.2 oz (61.3 g)  
7. Do not block any ventilation openings. Install in accor-  
dance with the manufacturer’s instructions.  
Warranty  
The Russound VMR1 is fully guaranteed against all defects in materials and  
workmanship for two (2) years from the date of purchase. During this period,  
Russound will replace any defective parts and correct any defect in workman-  
ship without charge for either parts or labor. For this warranty to apply, the unit  
must be installed and used according to its written instructions. If service is  
necessary, it must be performed by Russound. The unit must be returned to  
Russound at the owner’s expense and with prior written permission. Acciden-  
tal damage and shipping damage are not considered defects, nor is damage  
resulting from abuse or from servicing by an agency or person not specifically  
authorized in writing by Russound.  
8. Do not install near any heat sources such as radiators,  
heat registers, stoves, or other apparatus (including  
amplifiers) that produce heat.  
9. Do not defeat the safety purpose of the polarized or  
grounding plug. A polarized plug has two blades with  
one wider than the other. A grounding plug has two  
blades and a third grounding prong. The wide blade  
or the third prong is provided for your safety. If the  
provided plug does not fit into your outlet, consult an  
electrician for replacement of the obsolete outlet.  
This warranty does not cover: damage caused by abuse, accident, misuse,  
negligence, or improper installation or operation; power surges and lightning  
strikes; normal wear and maintenance; products that have been altered or  
modified; any product whose identifying number, decal, serial number, etc. has  
been altered, defaced or removed.  
10. Protect the power cord from being walked on or  
pinched, particularly at plugs, convenience receptacles,  
and the point where it exits from the apparatus.  
Russound sells products only through authorized dealers and distributors to  
ensure that customers obtain proper support and service. Any Russound prod-  
uct purchased from an unauthorized dealer or other source, including retailers,  
mail order sellers and online sellers will not be honored or serviced under  
existing Russound warranty policy. Any sale of products by an unauthorized  
source or other manner not authorized by Russound shall void the warranty on  
the applicable product.  
11. Use only attachments or accessories specified by the  
manufacturer.  
12. Use only with the cart, stand, tripod, bracket, or table  
specified by the manufacturer or sold with the appara-  
tus. When a cart is used, use caution when moving the  
cart-apparatus combination to avoid injury from tip-over.  
Damage to or destruction of components due to application of excessive  
power voids the warranty on those parts. In these cases, repairs will be made  
on the basis or the retail value of the parts and labor. To return for repairs, the  
unit must be shipped to Russound at the owner’s expense, along with a note  
explaining the nature of service required. Be sure to pack the unit in a corru-  
gated container with at least three (3) inches of resilient material to protect the  
unit from damage in transit.  
13. Unplug this apparatus during lightning storms or when  
unused for long periods of time.  
Overview  
The VMR1 Receiver is an in-wall device for use with the  
VM1 Video Matrix to provide connections for video displays  
in rooms where component video distribution is desired.  
It receives distributed video signals from the Video Matrix  
through a single CAT-5e cable.  
14. Refer all servicing to qualified service personnel. Servic-  
ing is required when the apparatus has been damaged  
in any way, such as the power supply cord or plug is  
damaged, liquid has been spilled or objects have fallen  
into the apparatus, or the apparatus has been exposed  
to rain or moisture, does not operate normally, or has  
been dropped.  
Before returning a unit for repair, call Russound at 603.659.5170 for a return  
authorization number. Write this number on the shipping label and ship to: Rus-  
sound, 5 Forbes Road, Newmarket, NH 03857.  
The receiver provides an analog component video signal  
from any source connected to the Video Matrix. Red, green,  
and blue RCA jacks in a single-gang Decora®-style wall plate  
connect to the display with an RGB video cable.  
5 Forbes Road, Newmarket NH 03857 USA  
Tel 603.659.5170 • Fax 603.659.5388  
If you have any questions, call Russound at 800.638.8055  
or 603.659.5170.  
Copyright © 2007 Russound. All rights reserved. All trademarks are the prop-  
erty of their respective owners. Specifications are subject to change without  
notice. Russound is not responsible for typographical errors or omissions.  
28-1238 03/08/07  
The VMR1 is capable of high-definition video resolution up to  
1080p.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Python Welder 232 835 User Guide
Q See Network Router QSW1001R User Guide
Ricoh Printer SP 3600SF User Guide
RIDGID Battery Charger R9213 User Guide
Roadmaster Speaker VRA10PSW User Guide
Rockford Fosgate Car Amplifier 2300 User Guide
Rose electronic Network Card CrystalView User Guide
Rowenta Hair Dryer 011425 49 04 CV9020 User Guide
Samson Speaker System STUDIODOCK 4i User Guide
Samsung Camera Accessories STH 160PI User Guide