OWNER'S MANUAL
LAMINATOR Model No. RHD-2201
English
Please read instructions carefully before use.
Royal Sovereign International Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
RHD-2201
INTRODUCTION
Thank you for purchasing the RHD-2201 Pouch laminator. It has been designed
and manufactured to provide years of continuous service. For high quality
lamination, please read this instruction manual thoroughly. This manual will
provide you with complete operating and maintenance information.
PACKAGE CONTENTS
Power Code
Main Body
Manual
Cleaning Paper
3
Download from Www.Somanuals.com. All Manuals Search And Download.
RHD-2201
SAFETY PRECAUTIONS
Failure to comply with any of the following safety procedures
could result in serious injury.
Keep this information for future reference.
WARNING
1. Insure the unit is plugged into a properly grounded outlet with the correct voltage.
2. Only licensed electricians should service or repair the electrical wiring.
3. Keep flammable and wet objects away from the machine.
4. Place machine on a flat sturdy surface.
5. Avoid excessive sunlight, humidity and temperatures.
6. Unplug the machine when moving it or when it's not in use.
7. Keep out of reach of children.
8. Only authorized maintenance and service technician are permitted to make
repairs to the machine.
9. When cleaning the machine, don't use flammable sprays or materials.
10. Do not touch the rollers or allow foreign objects inside the machine.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
RHD-2201
PARTS
Metal cover
Entrance
Cover Roller
Operation pane
Exit
Power cord
Power switch
5
Download from Www.Somanuals.com. All Manuals Search And Download.
RHD-2201
Detail for the operation panel
Temperature window
Ready lamp
Speed window
Speed control button
Stand By Button
Temperature control button
Temperature check button
Hot lamination button
Reverse button
Cold lamination button
Power On/Off
Power : It starts after pushing button, and it is set temperature 90ºC and speed
6step(75mic+80g) when the start.
Please push the power button when shut off. It is set the temperature
60ºC and speed 2step automatically, then it is stop automatically after for
a while.
HOT : After pushing Cold function and Stand By function then pushing HOT
button that is set up the temperature 90ºC and speed 6 step automatically.
Please control the temperature and speed on it’s requred film specification
referring to the manual “Film Termperature and Speed chart”
Cold : Please push the cold button when the lamination of cold film.
Temp : It can be controled 40ºC ~ 160ºC in unit of 1ºC
In case of wide range of temperature, please push the button
continuously.
Speed : It can be controled 1~9 step in units of 1step
(Please refer to the manual “Film Termperarure and Speed Chart”)
Start lamp : When not ready, light on and off repeatably
When ready, the lamp light on
Reverse : In case of wrong inserting and rolled film, the machine has a reverse
function
Stand By : It is set up the temperature 80ºC and speed 2step automatically.
(please use this function when you stop the machine for a while)
T-Check : In case of changing temperature and starting the machine, the present
temperature of roller can be checked.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
RHD-2201
FEATURES GUIDE
1. 6 Rollers Product : High quality and fast speed with 6 Rollers laminator.
2. Hot and Cold function : There are Hot and Cold function that can be used
both hot and cold film
3. Use different film : Hot film, Cold film, Thinflex film, Foam board, Foil
4. Temperature and Speed Control Function : It can be controled the
temperature 40~160ºC in unit of 1ºC and 1~9 step in unit of 1step.
It can be controled temperature and speed on it's required specification of
various film lamination.
5. Reverse Function : In case of wrong inserting and rolled film, the machine
has a reverse function
6. Stand By Function : The machine can be staying in 80ºC of temperature
continuously that the user who frequently use the machine can reduce the
ready time for saving eletronic power.
7. Fast Speed : Maximum speed is 2700mm / min, and 1~9 step can be
controled for it's condition of lamination.
8. Preventing Overheat Function : When the wong condition of termperature
sensor, heating system is automatically stopped for safety.
9. FND Display : It can be seen it's speed and temperature condition at day and
night through the FND window.
10. Present Temperature Function : The user can check the present
termperature.
11. Automatical shutting off function : It can be shut off the power supply
automatically after the use.
12. Cover Roller : There is special cover on the roller to help the clean.
13. Button Sound : The user know it's condition through the button sound.
14. Accuracy : The temperature and speed are very accurate by Microprecessor.
15. Stability : Heating can be transmitted to the roller very stablely by using
Quartz and High-sensor heater.
16. Simplicity : It's simple and fascinate design can be used in every place and
simply set up.
17. Safety : It is guranteed by the perfect after-service.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
RHD-2201
OPERATING INSTRUCTIONS
1. Place the machine on a flat sturdy surface.
2. Insure the unit is plugged into a properly grounded outlet with the correct
voltage power plug and outlet.
3. Turn the laminator ON located on the rear of the machine.
> Power On
> Power Off
Starting lamination
Finishing lamination
(Please turn off the machine when rollers are cooled down)
4. Push on POWER button.
5. Press the HOT FILM or COLD FILM button according to the film you are using
for lamination.
> Use for Hot Button
> Use for Cold Button
6. If you are laminating several items and need hot lamination for some and cold
lamination for some we recommend you laminate the cold pouch items first to
save time.
7. Choose appropriate laminating thickness and speed using the FND controller,
Please see below temperature and speed table which is standard for RHD-2201.
* Materials to be laminated:
80g = Thin paper such as paper for fax machine or magazine.
120g = Copy paper
200g = Pictures, Catalogues
* NOTE : The weight of paper may vary depending on manufacturers therefore
it is recommended to adjust proper temperature and speed
accordingly.
• We recommend you use Royal Sovereign laminating film.
• The above table is based on Royal Sovereign's film.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
RHD-2201
FILM SETTINGS -Based on 25˚C-
Paper(g)
Temp(˚C)
90
Speed
Film Thickness
80
120
200
80
120
200
80
120
200
80
120
200
80
120
200
80
120
200
80
120
200
80
120
200
80
6
5
4
7
6
4
7
6
4
7
6
4
6
5
4
6
5
4
6
5
4
4
3
3
4
4
3
(
75 mic 3 mil
)
90
90
95
95
(
100 mic 4 mil
)
)
95
100
100
100
105
105
105
110
110
110
115
115
115
125
125
125
120
120
125
120
125
125
(
125 mic 5 mil
(
150 mic 6 mil
)
(
175 mic 7 mil
)
)
(
200 mic 8 mil
(
)
250 mic 10 mil
THINFLEX
FOIL
120
200
8. Please wait until " Ready Lamp" is steadily lit.
(
If materials are laminated while Ready Lamp is blinking, lamination results
)
may not be good enough .
9. Once the ready lamp is steadily lit place the lamination pouch with the sealed
end first into the entrance of the laminator.
Make sure that you place the laminating pouch
with the sealed end first into the entrance of the
laminator.
Only laminate whole pouches,
DO NOT cut or alter pouches
in anyway before laminating.
Set temperature according to
pouch film thickness.
10. The laminated item will exit the rear of machine.
11. If an item gets jammed press the "Reverse" button to clear the jam.
12. For periods in between jobs set the laminator to "pre-heat" to conserve
electricity.
13. Repeat the above steps until all of your lamination is completed.
When lamination is completed turn the power off
9
Download from Www.Somanuals.com. All Manuals Search And Download.
RHD-2201
MAINTENANCE
Using Cleaning Paper :
1. Turn the laminator ON located on the rear of the machine.
2. Please wait until " Ready Lamp" is steadily lit. Once the ready lamp is steadily
lit place the cleaning paper in the entrance of the machine. Once the paper
has exited the machine fold the cleaning paper so that the inside is now
facing out and again place the paper in the entrance of the machine.
3. Continue repeating step 2 until the paper exits the machine and is not dirty.
* NOTE : Rollers should be cleaned after 10 laminations.
Do not use regular paper to clean the rollers it must be plain coated
white paper.
4. Do not apply any cleaning fluids to the rollers, certain fluids may cause damage.
5. Do not clean rollers with sharp or pointed objects.
6. Use a damp cloth with water to clean the body of the machine.
7. Store machine in a dry clean area.
TROUBLE SHOOTING GUIDE
Problem
Possible Solution
1. Check if the power cord is plugged in.
2. Check if the power is on.
Motor doesn't work.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
RHD-2201
SPECIFICATIONS
Description
RHD-2201
(
Unit dimension mm
)
(
557 W 282 D 145 H
)
(
)
(
)
x
x
(
Max. laminating width mm
)
346
(
Laminating pouch thickness micron
)
~
75 250
(
Max. laminating thickness mm
)
3
(
Max. laminating speed mm/min
)
2700
(
Number of rollers EA
)
6
Heating method
HOT ROLLER
(
Ready Time Min
)
~
5 6
Driving Motor
DC MOTOR
19.5
(
)
Weight Kg
Power supply
Power consumption W
AC 220V / 50~60Hz
1200
(
)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
RHD-2201
LIMITED ONE YEAR WARRANTY
This warranty applies to repair or replacement of product found to be defective
in material or workmanship for one year from the date of the original purchase.
This warranty is extended only to the original purchaser.
This warranty does not apply to damage resulting from abuse, misuse or
improper maintenance or damage that is attributable to acts of God. Royal
(
)
Sovereign International, Inc. and its affiliated companies is not liable for
incidental or consequential damages of any nature.
This limitation would not apply if you live in those areas that do not permit the
exclusion or limitation of incidental or consequential damages.
Royal Sovereign International will repair or replace this product if it is found to
be defective in material or workmanship. Defective product must be returned to
Royal Sovereign International, freight prepaid, with proof of purchase. Upon
repair or replacement the product will be returned to the customer, freight
collect.
Return defective product to the following address with a detailed description of
the problem. If possible, pack in original carton. Please prepay shipping
charges.
For service or sales please contact your local Royal Sovereign office:
Royal Sovereign International Inc.
2 Volvo Drive Rockleigh, N.J. 07647, U.S.A
TEL :+1) 201.750.1020, 800-397-1025
FAX :+1) 201.750.1022
Royal Sovereign Canada
164 Oakdale Road, Unit 164 Toronto,
Ontario M3N2S5
TEL : +1) 416-741-8400
FAX : +1) 416-741-8185
Royal Sovereign International Australia PTY.
RS Holland B.V.
Planetenweg 75, 2132HM Hoofddorp,
The Netherlands.
Tel : 0031-23-5626620, 0031-23-5654451
Fax : 0031-23-5654565
LTD.
30 Prime Drive, Seven Hills, NSW 2147,
Australia
TEL : +61) 2-9674-2127
FAX : +61) 2-9674-2027
12
Download from Www.Somanuals.com. All Manuals Search And Download.
|