Royal Appliance Espresso Maker 016 User Guide

OY L  
C A P P U C C  
I
N O  
TYPE SUP 016  
User's and maintenance booklet  
We congratulate for having bought this top-quality espresso  
machine and thank you for choosing Saeco.  
Before operating the machine, we recommend to read the following  
instructions thouroughly which explain how to use, clean and  
maintain the machine.  
HOUSEHOLD USE ONLY  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
2 5  
2 9  
2 7  
2 6  
2 8  
1 0  
1 1  
1 2  
1 3  
1 4  
4
1 5  
1 6  
1 7  
18  
9
1 9  
2 0  
8
7
6
5
2 1  
2 2  
3
2
1
2 4  
2 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
5
3 0  
3 2  
3 4  
3 7  
3 9  
3 1  
3 3  
3 6  
3 8  
4 0  
4 1  
4 4  
4 6  
4 8  
5 0  
4 2  
4 3  
5
6
4 5  
4 7  
4 9  
+
-
3 5  
7
7
7
5 1  
5 2  
7
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
TECHNICAL DATA  
DESCRIPTIO N O F SYMBO LS  
74  
75  
Ho w to u se th e in stru ctio n s  
Voltage rating  
see rating plate on the back of the machine  
see rating plate on the back of the machine  
approx. 385 x 330 x 395 mm  
metal and plastic material  
approx. 16 kg  
Nominal power  
These instructionscannotanticipate everypossible  
use of the machine.  
For further information or questions concerning  
specific situations or problems, please contact  
the local dealer or manufacturer directly.  
Sa ve th e se in stru ctio n s ca re fu lly a n d  
m a k e su re to h a n d th e m to o th e r  
u se rs.  
Dimensions (length x width x height)  
Machine case  
W eight  
Cable length  
approx. 1.2 m  
System  
free flow thermal cut-out, alternating piston pump  
electronic  
Temperature control  
Coffee grinder adjustment  
Coffee grounds ejection  
Ground coffee dosage  
B
The warning triangle shows all important safety  
indications to ensure the user’s safety.  
The non-observance of said instructions may  
cause serious injuries!  
Reference to figures, parts of the machine and  
control elements are given by numbers or letters,  
as figure B exemplifies.  
grinding adjustment device  
automatic  
coffee releasing device  
Cup programming  
0-250 ml approx.  
courttesy of  
W ater tank  
removable, transparent tank  
electronic, continuous  
W ater regulation  
Capacity  
- water tank  
approx. 2.4 litres  
- bean coffee container  
300g bean coffee  
The first cover page of the manual shows figures  
relevant to the text. Thus, keep it open while  
reading the instructions.  
Steam/ hot water dispensing tube  
Steam/ hot water dispensing  
Heating time  
adjustable, supplied with burn protection  
adjustable, continuous  
approx. 2 min.  
Brewing time  
- espresso coffee  
- coffee  
approx. 20s/ cup  
SAVE THESE INSTRUCTIO NS  
approx. 30s/ cup  
- hot water  
approx. 60s/ cup  
- milk (cappuccino)  
approx. 60-90s cream/ cup  
incorporated  
The lightning flash with arrowhead symbol, within  
The exclamation point within an equilateral triangle  
Overheating protection  
Insulation  
an equilateral triangle, is intended to alert the user  
to the presence of unisulated «dangerous voltage»  
within the product‘s enclosure that may be of  
sufficient magnitude to constitute a risk of fire or  
electric shock to persons.  
is intended to alert the user to the presence of  
important operating and maintena nce (servicing)  
instructions in the literature accompanying the  
appliance.  
protection range I  
Approvals  
see rating plate on the back of the machine  
EN 60335-2-15(96) - EN 60335-2-14(96) - EN 55014  
in compliance with the warranty certificate enclosed herein  
In compliance with EN regulation  
W arranty  
Ta b le o f co n te n ts  
Acce sso rie s (included in the machine price)  
Measuring spoon  
Page  
Page  
Central unit key  
75  
77  
79  
79  
80  
80  
80  
81  
Technical data  
Safety rules  
82  
86  
87  
88  
90  
91  
94  
95  
Programming the machine  
Recommendation  
Grind adjustment  
Cleaning brush  
W ater hardness detecting strips  
Machine controls and parts  
Description of the control panel  
Unpacking/ Installation  
Power supply connection  
Starting and use  
Brewing  
Incorporated Safety Devices  
Cleaning and maintenance operations  
Disposal  
The manufacturer reserves the right to make improvements to the appliance due to technological  
advancement.  
Drainage  
Troubleshooting  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY RULES  
76  
77  
Po sitio n in g  
A
Place the machine on a plane surface, where  
nobody can turn it upside down or be hurt. Hot  
water or overheated steam might escape from  
the machine: danger of burns! Never use the  
coffee machine outdoors or inside rooms with  
low temperature conditions. Do not place the  
machine on hot surfaces or in the proximity of  
open flames to avoid possible damages of the  
case.  
Ele ctrica l p a rts sh o u ld n e ve r b e in  
co n ta ct w ith w a te r: d a n g e r o f sh o rt-  
circu it! Ste a m a n d h o t w a te r m a y  
ca u se b u rn s. N e ve r d ire ct ste a m o r  
w a te r je ts to w a rd s th e b o d y ; sp e cia l  
a tte n tio n m u st b e p a id w h e n to u ch in g  
th e ste a m / h o t w a te r sp o u t a n d th e  
h e a tin g p la te : d a n g e r o f b u rn s!  
C
Th is m a ch in e m u st b e u se d e x clu sive ly  
fo r t h e p u r p o s e s it h a s b e e
m a n u fa ctu re d .  
Do not make technical changs for any reason  
whatsoever; any improper use is forbidden, due  
to the risks which might occur!  
Da n g e r o f b u rn s  
Do not direct the overheated steam or hot water  
jet towards you or other people. Do not touch hot  
surfaces, such as the steam/ hot water spout.  
B
C
D
N e ce ssa ry sp a ce  
+
+
-
-
W a rn in g s  
The machine shall only be used by adults and  
properly instructed persons.  
For a proper operation of the machine it is  
advisable to keep to the following indications:  
- choose a levelled surface  
- choose a properly lit and hygienic room  
provided with accessible sockets  
- leave a minimum distance of 100 mm between  
the machine and the wall  
Vo lta g e  
Never touch parts under current! They might  
cause electric shocks, serious injuries and death.  
The machine must be connected to a socket with  
suitable voltage. Voltage must correspond to the  
voltage shown on the appliance rating plate.  
E
E
D
Cle a n in g  
Before cleaning the machine, make sure to  
switch off all keys and unplug the machine. W ait  
until the machine cools down. Never plunge the  
machine into water! Do not tamper with the inner  
partsofthe machine and neveropenthe machine.  
A
Po w e r co rd  
Never use the machine with a defective power  
cord. Replace defective power cords and plugs,  
contacting authorised personnel . Do not extend  
the power cord around corners, sharp edges or  
over hot parts and protect it from oil. Do not shift  
or move the machine by pulling its power cord.  
Do not unplug the machine by pulling the power  
cord and never touch it with wet hands. Make  
sure the power cord does not hang from tables  
or shelves.  
+
-
+
-
10cm  
10cm  
Re p a ir/ m a in te n a n ce  
In case of defect or suspected damage following  
a fall, unplug the machine immediately. Never  
use a defective appliance. Only skilled personnel  
are authorised to carry out repairs. The  
manufacturer declines any liability whatsoever,  
should repairs fail to be carried out by authorised  
personnel.  
+
-
B
Ke e p ch ild re n a w a y  
In case of fires, use carbon dioxide (CO2)  
extinguishers. Never use water or powder  
extinguishers.  
Do not allow children to play with the machine.  
Children are not aware of the potential danger  
caused by electric appliances.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIO N  
MACHINE CO NTRO LS AN D PARTS  
79  
80  
circu it! O ve rh e a te d ste a m a n d h o t  
w a te r m a y ca u se b u rn s. Do n o t d ire ct  
ste a m o r w a te r je t to w a rd s th e b o d y ;  
fu rth e rm o re , g re a t a tte n tio n m u st b e  
g ive n w he n to uching e ithe r the ste a m /  
h o t w a te r sp o u t o r th e h e a tin g p la te :  
d a n g e r o f b u rn s!  
Un p a ck in g / in sta lla tio n  
IMPO RTANT SAFEGUARDS  
a) A short power-supply cord (or detachable power-supply cord) is to be provided to reduce  
risks resulting from becoming entangled in or tripping over a longer cord.  
b) Longer detachable power-supply cords or extension cords are available and may be used  
if care is exercised in their use.  
Standard packing is strong enough to protect the  
machine during mailshipping. Keep thispackage  
to return the machine to the manufacturer,  
whenever necessary.  
c) If a long detachable power-supply cord or extension cords is used,  
1) The marked electrical rating of the detachable power-supply cord or extension cord  
should be at least as great as the electrical rating of the appliance,  
2) If the appliance is of the grounded type, the extension cord should be a grounding-  
type 3-wire cord, and  
Before installing the machine, keep to the safety  
indications at page 77.  
Never use the machine without water or coffee  
beans.  
W henever possible, use the machine with swivel  
(24). W hen installing the machine, make sure  
the swivel is always fitted in the provided area n  
the lower side of thecmoacuhrinttee. sy of  
Po w e r su p p ly co n n e ctio n  
3) The longer cord should be arranged so that it will not drape over the counter top or  
table top where it can be pulled on by children or tripped over.  
Remove measuring spoon, brush and the central  
unit key from the coffee grounds container (1)  
and keep them within reach.  
1 6 Coffee bean container  
1
2
3
4
5
6
7
8
9
Coffee grounds container  
Drip tray  
Cup holder surface  
Main switch  
1 7 Grind adjustment lever  
1 8 Coffee dosage adjustment lever  
1 9 Service door  
2 0 Filling funnel  
2 1 Handle for assembling and disassembling  
of central unit  
2 2 Central unit  
2 3 Coffee rest drawer  
2 4 Swivel  
2 5 Cappuccinatore  
2 6 Suction pipe  
Unwind the power cord (5) from the rear side  
of the machine.  
Power cord  
W a rning: electric current may cause d e a th !  
Always keep to safety rules.  
Coffee dispensing unit  
Steam/ hot water spout wit burn-protection  
Control panel  
3 0  
Remove the cover (15) and fill the container with  
coffee beans (300 g approx.), then, replace the  
cover. Adjust grinding by means of the grind  
adjustment lever (17), positioning it on point “5”  
of the scale.  
The coffee machine must be connected to an  
adequate socket. Voltage must suit to the voltage  
specified on the appliance rating plate.  
Steam knob  
1 0 Cup heating plate  
1 1 W ater tank  
1 2 W ater tank cover  
1 3 W ater level  
1 4 Pre-ground coffee container with cover  
1 5 Coffee bean container cover  
2 7 Dispenser  
2 8 Cappuccinatore adjusting valve  
2 9 Cappuccinatore cover  
Never use defective power cords! Defective  
power cords and plugs must be replaced by an  
authorised personnel.  
Never fill the coffee bean container with other  
products since they might damage the machine!  
De scrip tio n o f th e co n tro l p a n e l  
Digital display  
WARMING UP......  
Standby switch:  
energy saving function on/ off  
Before filling the container with coffee beans,  
make sure the pre-ground coffee container (14)  
is closed to prevent coffee beans from falling into  
it. They might damage the machine!  
Should an extension cord be used, check its  
perfect conditions. The extension cord must have  
a minimum section of 1,5 mm2 or 16 AW G and  
must be supplied with a three-pole plug/ socket.  
ESC  
ENT  
Selection key for 1 or 2 cups of tall coffee or key  
” in the programming mode  
Selection key for 1 or 2 cups of regular coffee  
or key “ ” in the programming mode  
Remove water tank (11) from the machine,  
remove its cover (12) and fill it with cold water  
(approx. 2.4l). A valve on the tank bottom  
prevents water from escaping.  
Sta rtin g a n d u se  
Selection key for 1 or 2 cups of espresso coffee  
or ESC” in the programming mode  
Pre-ground coffee selection button or ENTin  
the programming mode  
Be fo re in sta llin g th e w a te r ta n k in th e  
m a ch in e , m a k e su re th e co ffe e b e a n  
co n ta in e r co ve r is p ro p e rly fitte d .  
Pa rts u n d e r cu rre n t sh a ll n e ve r b e in  
co n ta ct w ith w a te r: d a n g e r o f sh o rt-  
Cappuccino selection key  
Hot water on/ off key  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRO GRAMMIN G THE MACHINE  
DRAINAGE  
81  
82  
3 1  
Im p o rta n t: It is a d visa b le to d ra in th e  
m a ch in e b e fo re th e first sta rt, a fte r a  
p ro lo n g e d p e rio d th e m a ch in e h a s n o t  
b e e n u se d o r w h e n e ve r th e w a te r  
ta n k h a s b e e n co m p le te ly e m p tie d .  
Furthermore, should the pump be defective, the  
display shows:  
"VENTILATE  
Pro g ra m m in g th e m a ch in e  
3 2  
"PLEASE ACTIVADE "  
"SYSTEM 2  
keys  
selected item. It is possible to modify the selected  
figuresina menuitemusing the keys . The key  
. The keyENTallowsyouto activate the  
Install the water tank, slightly pressing over it to  
fit the valve which will open automatically.  
"
ENT memorizes the selected options (for instance  
ONfor the cup heating plate).  
W a te r h a rd n e ss a d ju stm e n t  
Inorderto adjustthe waterhardness, itisnecessary  
to test the water using the strip supplied with the  
machine. Dip the strip into the water for a second,  
shake off excess water gently, wait approx. 1  
minute and read the results.  
Do not fill the tank with an excessive quantity of  
water.  
Should you accidentally change some data,  
press ESC (*) to leave the menu item without  
saving the new options which were selected  
accidentally.  
"
Always fill the tank with fresh water only: hot  
water as well as other fluids might damage the  
tank. Never use carbon dioxide added water.  
Move the asterisk at the end of the line to the  
menu item W ATER HARDN .” using the keys  
La n g u a g e se le ctio n  
Move the a sterisk to the menu item  
To enter the programming mode, press the key  
EN T ( pre-ground coffee) when the machine  
is on and keep it pressed until the first two lines  
of the programming mode are displayed:  
and select it by means of the EN T  
LAN GUAGE” using the keys  
. Press  
button.  
EN Tto activate this item. The following message  
will be displayed:  
The following message will be displayed:  
Do not switch on the machine on if the water tank  
is empty: always make sure there is enough  
water in the tank!  
"1 LANGUAGE  
"2 SYSTEM 2  
"
"
"3 WATER HARDN./ "  
"1 LANGUAGE  
"ENGLISH  
"
"
"HARDNESS 3  
"
At the end of the line a blinking asterisk is  
displayed, which can be moved up and down  
The keys  
options:  
allow you to change the set  
Connect the plug to the socket and press the main  
switch. The following message will be displayed:  
The keys allow you to change the set options :  
ENGLISH” , “ITALIANO” , “FRANÇAIS”,  
with the keys  
(tall and regular coffee).  
DEUTSCH”, NEERLANDAIS, “ESPAÑOL”  
PO RTUGUES”.  
,
If the asterisk is on the first menu, press  
button  
HARDN ESS 4  
(hard water)  
HARDN ESS 3  
(medium water)  
HARDN ESS 2  
(soft water)  
"WARMING UP......."  
to move it on the second menu and vice versa.  
The display shows the following sequence of  
messages:  
Should  
En a b lin g o f se co n d h e a tin g sy ste m  
Royal Cappuccino is equipped with two boilers  
with independent circuits. One of these boilers  
ca n be disconnected. By pressing  
Hardness 4  
"ENERGY  
"SAVING  
"
"
Hardness 3  
Hardness 2  
Hardness 1  
1
2
3
4
5
6
7
8
9
LANGUAGE  
SYSTEM 2  
WATER HARDN.  
CUP HEATER  
TEMP. L. COFFEE  
TEMP. COFFEE  
TEMP. S. COFFEE  
PREBREWING  
PREGRINDING  
10 PROG. H. WATER  
11 PROG. CAPPUC.  
12 TOTAL COFFEE  
13 DESCALING  
14 SIGN. DESCAL.  
15 TIMER  
HARDN ESS 1  
(very soft water)  
keys  
move the asterisk at the end of the  
line to the menu item SYSTEM 2”. Press EN T  
to activate this item. The following message will  
be displayed:  
be displayed, press button  
“Standby” to  
disactivate the energy saving mode.  
Dra in a g e  
Cu p h e a tin g p la te co n n e ctio n  
Royal Cappuccino is equipped with a useful cup  
heating plate which can be disconnected, if  
required.  
16 VENDING  
17 EXIT  
"2 SYSTEM 2  
"ON  
"
"
Direct the steam/ hot water spout on the drip tray  
(2). Place a cup or another suitable container  
under the dispensing tube, then turn the steam/  
hot water knob counterclockwise. The pump  
starts automatically. W ait until a regular water jet  
is obtained, then close the knob. The machine is  
now drained and ready to work.  
To leave the menu, move the asterisk at the end  
of the line to item <<Ex it>> using the key  
Then, press EN T pre-ground coffee). The  
The keys  
allow you to change the set  
Press keys  
to move the asterisk to item  
.
options: O N , O FF.  
CUP HEATER”. Press EN T to activate this  
function.  
The following message will be displayed:  
If the second boiler is disconnected it is not  
possible to dispense steam and therefore cap-  
puccino can’t be prepared. Should the cappuc-  
cino selection button be pressed  
or the steam/ hot water knob be opened, the  
display shows the following message:  
(
machine is now in the normal mode again.  
The following message will be displayed:  
Se le ctin g sin g le m e n u s  
"4 CUP HEATER  
"ON  
"
"
"SELECT PRODUCT "  
"READY FOR USE "  
Select the different menu items by means of the  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRO GRAMMIN G THE MACHINE  
PRO GRAMMIN G THE MACHINE  
83  
84  
time saving whenever the machine is often used.  
This function is not recommended in all other  
cases, because fresh ground coffee is by far  
better.  
The following message will be displayed:  
The keys  
allow you to change the set  
Press keys  
to move the asterisk to item  
options O N ” or O FF”.  
PRO G.CAPUC.”. Press EN T to activate this  
function:  
The following message will be displayed:  
"STANDBY  
"AFTER 0:00  
"
"
Te m p e ra tu re se le ctio n  
Press keys  
to move the asterisk to item  
W ith Royal Cappuccino a precise adjustment of  
the coffee temperature can be executed. Move  
the asterisk at the end of the line to the menu items  
Te m p . l. co ffe e”, “Te m p . co ffe e” or  
Te m p . s. co ffe eand select it by means of  
the EN T key.  
By means of the same keys  
, select the  
PREGRIN DIN G”. Press EN T to activate this  
"11 PROG. CAPUC. "  
function.  
"ON  
"
suitable time and confirm the value throughEN T  
button.  
The following message is displayed:  
The keys  
allow you to change the set  
W hen the selected time is over the following  
message is displayed:  
options: O N”, “O FF”.  
Depending on the selection, the following  
messages will be displayed:  
"9 PREGRINDING "  
"ON  
"
Coffee counter  
"ENERGY  
"SAVING  
"
"
Press keys  
to move the asterisk to item  
"5 TEMP. L. COFFEE"  
The keys  
allow you to change the set  
TO TAL CO FFEEand selecby means of the  
EN T key. The following message will be  
displayed:  
"MEDIUM  
"
options O N ”, “O FF”.  
The machine stops and can be switched on  
again by means of button “standby”.  
"6 TEMP. COFFEE "  
"MEDIUM  
Ho t w a te r p ro g ra m m in g  
"
W henever this function is enabled, the selected  
water amount is constantly dispensed. On the  
contrary, whenever this function is disabled hot  
water is dispensed until the user stops the  
dispensing. Ho t w a te r a m o u n t ca n o n ly  
b e p ro g ra m m e d w ith p ro g ra m m in g  
m o d e e n a b le d .  
"12 TOTAL COFFEE "  
Ve n d in g fu n ctio n s  
"
XX"  
"7 TEMP. S. COFFEE"  
Royal Cappuccino is equipped with a counter  
allowing the machine statistic analysis while  
detecting the different dispensing operations. It  
is also equipped with another counter which is  
able to stop the dispensing operations after a  
certain number. These functions are protected by  
a special access code.  
This value cannot be modified. Quit the menu by  
means of the EN T or ESC keys.  
The keys  
allow you to change the set options  
M in im u m ”, “m a x im u m ”, “h ig h ”,  
m e d iu m ” or lo w ”.  
De sca lin g  
Move the asterisk at the end of the line to menu  
item De sca lin gand select it by means of the  
EN T key.  
- “PRO G. H. W ATER”. Press EN T to activate  
Pre b re w in g fu n ctio n  
this function.  
As soon as the coffee has been moistened, the  
pump stops for a while in order to allow a better  
utilization of the coffee powder.  
Move the asterisk at the end of the line to the  
menu item PREBREW IN Gand select it by  
means of the EN T key.  
By means of keys  
move the asterisk to  
The following message will be displayed:  
The following message will be displayed:  
item VEN DIN Gand select it through the  
EN T key. From the displayed submenu it is  
possible to select one of the following items by  
"13 DESCALING  
For descaling procedure, see page 92.  
Tim e r  
The timer enables the automatic switching off of  
the machine after a preset period, which can be  
set from 15 minutes to 12 hours after last  
dispensing. If after a few seconds coffee is  
brewed again, the timer is reset. If the value set  
is 0 :0 0 , the timer function is not activated and the  
machine does not switch off.  
"
"10 PROG. H. WATER"  
"ON  
"
meansofthe same keys  
. Onthe contrary,  
The following message will be displayed:  
if the hot water selection key is pressed, the  
submenu can be quit.  
The following messages will be displayed:  
The keys  
allow you to change the set  
"8 PREBREWING  
"ON  
"
"
options: O N”, “O FF”.  
"CODE  
"
"
Ca p p u ccin o p ro g ra m m in g  
The keys  
allow you to change the set  
****"  
W henever this function is enabled, the same  
amount of cappuccino is constantly dispensed.  
On the contrary, whenever this function is  
disabled, cappuccino is brewed until the user  
stops the dispensing. Ca p p u ccin o a m o u n t  
ca n o n ly b e p r o g r a m m e d w it h  
p ro g ra m m in g m o d e e n a b le d .  
options O N”, “O FF,LO N G(in the latter  
case the pump stop is longer).  
"1 LARGE COFFEE "  
"TOTAL  
"
Pre -g rin d in g fu n ctio n  
Move the asterisk at the end of the line to menu  
By activating this function, grinding occurs every  
time the doser is empty. So a ground coffee  
portion is always ready in the doser, allowing a  
"1 COFFEE  
"TOTAL  
"
"
item Tim e r” by means of the keys  
.
Press EN T to select this item.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRO GRAMMIN G THE MACHINE  
RECO MMEN DATIO NS  
85  
86  
Co d e e n te rin g  
To enter the code, press keys  
dispensed from the last reset.  
Co u n te r  
"1 SMALL COFFEE "  
From the VEN DIN G menu, move the asterisk to  
and move  
"TOTAL  
"
"COUNTER  
"LOCKING:  
"
the CO FFEE menu by means of keys  
;
the asterisk to the counter to be changed; select  
it through the EN T button.  
The following message will be displayed:  
XX"  
"HOT WATER  
"TOTAL  
"
"
confirm the selection through EN T.  
By means of the same keys  
, it is possible  
After a certain number of cycles, this function  
allows to stop the coffee dispensing (excluding  
hot water, steam and cappuccino dispensing  
operations). It can also be used, for example, to  
program the machine servicing.  
If the 0 value is set, the function is disabled.  
From the VEN DIN G menu, move the asterisk to  
the CO UN TER menu by mea ns of  
to modify the selected value (to reset the counter,  
for example). Press EN T to save a new value.  
On the contrary, by pressingESC the new value  
entering is stopped and, as a result, the former  
counter setting shall be considered.  
"COUNTER  
"LOCKING  
"
"
"CODE??  
"
Enter the number to be set on the first character by  
means of keys and confirm the selection with  
"COUNTER  
"CYCLES  
"
"
ENT. The entered number is then saved and the  
cursormovesautomaticallytothefollowingcharacter.  
If a wrong code has been entered, the following  
message will be displayed for about two se-  
conds:  
Sm a ll co ffe e co u n te r  
keys  
and confirm the selection through  
Co d e p ro g ra m m in g  
"1 SMALL COFFEE "  
"TOTAL:  
EN T.  
A code protects the access to the machine  
counters; enter it for each programming section  
and before carrying out any modification. As  
soon as the code is entered, modifications can  
be carried out without entering it again as long  
as the programming function is enabled.  
The machine is not supplied with a code. Keep  
to the following indica tions for code  
programming:  
XX"  
Press the same keys to modify the selected value  
(for example to set a new servicing limit). Through  
EN T a new value can be saved. On the  
contrary, by pressingESC the new value entering  
is stopped and, as a result, the former counter  
setting shall be considered.  
W hen the set limit has been reached, the coffee  
dispensing stops and the following two messages  
are displayed:  
"CODE FAULTY  
"
The counter shows the small coffee amount  
dispensed from the last reset.  
From the VEN DIN G menu, move the asterisk to  
the SMALL CO FFEE menu by means of  
After having entered three wrong codes, the  
entering procedure is not allowed any longer.  
keys  
; confirm the selection throughEN T.  
Co u n te r m o d ifica tio n  
La rg e co ffe e co u n te r  
"1 LARGE COFFEE "  
By means of the same keys  
, it is possible  
to modify the selected value (to reset the counter,  
for example). Press EN T to save a new value.  
On the contrary, by pressingESC the new value  
entering is stopped and, as a result, the former  
counter setting shall be considered.  
By means of keys  
move the asterisk to  
itemVEN DIN Gand select it through theEN T  
key. The following message will be displayed:  
"COFFEE DISPENS. "  
"BLOCKED  
"
"TOTAL:  
XX"  
"CODE  
"
"
"SELECT PRODUCT "  
"READY FOR USE "  
The counter shows the large coffee amount  
dispensed from the last reset.  
****"  
Ho t w a te r d isp e n sin g co u n te r  
From the VENDING menu, move the asterisk to the  
By means of keys enter the number to be set on  
the first character and confirm the selection  
through the EN T key. The entered number is  
saved and the cursor moves automatically to the  
following character.  
"HOT WATER  
"TOTAL:  
"
XX"  
Reset the counters by pressing the cappuccino  
LARGE COFFEEmenu by means of keys  
;
selection key  
.
confirm the selection with buttonENT.  
By means of the same keys  
it is possible  
Do sa g e o f g ro u n d co ffe e  
The counter shows the hot water amount (in ml)  
dispensed from the last reset.  
From the VEN DIN G menu, move the asterisk to  
the HO T W ATER menu by mea ns of  
to modify the selected value (to reset the counter,  
for example). Use the EN T button to save a new  
value. Press the ESC button to stop the new value  
entering procedure and, as a result, the former  
counter setting shall be considered.  
3 3  
After having entered the complete new code, it  
is necessary to save it.  
The following message will be displayed:  
The coffee dosage adjustment lever (18) allows  
the selection of the grinding coffee amount from  
6 to 9 grams. Place lever (18) on the required  
position.  
keys  
; confirm the selection throughEN T.  
By means of the same keys  
, it is possible  
"NEW CODE=XXXX "  
to modify the selected value (to reset the counter,  
for example). Press EN T to save a new value.  
On the contrary, by pressingESC the new value  
entering is stopped and, as a result, the former  
counter setting shall be considered.  
Co ffe e co u n te r  
"SAVE NO  
"
RECO MMEN DATIO N S  
"1 COFFEE  
"TOTAL:  
"
XX"  
By means of keys  
the code can be saved  
Pro lo n g e d id le n e ss  
or not saved: YES or N O .  
If the machine hasn’t been used for a prolonged  
The counter shows the regular coffee amount  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECO MMEN DATIO NS  
BREW ING  
87  
88  
period, it is advisable for hygienic reasons to run  
a rinse cycle through the machine.  
The machine does not stop: remove the grounds  
container and empty it.  
BREW IN G  
each cup; for two cups, it grinds two portions of  
coffee, one after the other, thus ensuring optimum  
Royal Cappuccino is equipped with 2 indepen- coffee quality.  
dent heating systems which may dispense at the  
Place a cup under the steam/ hot water spout (7)  
and fill it with water by operating the hot water  
knob.  
Grin d a d ju stm e n t  
If the coffee flows too quickly (coarse grind) or too  
slowly (fine grind) into the cup, adjust coffee grinder.  
The recommended grind level is position 5.  
same time coffee and hot water, coffee and  
steam or coffee and cappuccino.  
Adjust the grinding degree according to the  
instructions mentioned at page 87.  
If, during the dispensing of 2 coffees, hot water,  
steam or cappuccino are dispensed at the same  
time, it may happen that the second coffee  
portion is not immediately ground after the first  
one, but only at the end of the first coffee  
dispensing.  
Pre h e a tin g cu p s  
Cups may be preheated by placing them on the  
special cup heating plate.  
Should grinding be too coarse, adjust it on a  
lower value (e.g. from 5 to 3). On the contrary,  
should grinding be too fine, adjust it on a higher  
value (e.g. from 5 to 7).  
Adjust the grinding degree only when the coffee  
grinder is running.  
Te m p e ra tu re le d  
W hen starting the machine, the following  
message is displayed:  
Co ffe e d isp e n sin g  
Cu p le ve l fillin g  
This machine allows the precise dosage of the  
coffee quantity, according to the cup dimension.  
Place one ortwo preheated cupsonthe cupholder  
grill (3) under the dispenser (6). By pressing the  
releva nt selection key, the ma chine will  
automatically dispense the selected coffee.  
"WARMING UP  
"
Adjust the grind level only when the coffee  
grinder is running. Avoid any extreme adjustment  
(for instance on position 1) whenever possible.  
It is preferable to try another coffee blend, since  
not all coffee blends are suitable.  
The desired quantity  
throughthe selectionkeys. The relevantmessages  
will be displayed.  
can be selected  
As soon as the operating temperature has been  
reached, the following message is displayed:  
Dispensing may be interrupted by pressing one  
of the coffee selection keys, if an excessive water  
amount has been selected. Should you interrupt  
the coffee flow after the first of two coffees, the  
second is not dispensed.  
"SELECT PRODUCT "  
"READY FOR USE "  
To set the quantity of coffee to be dispensed, it  
is necessary to press the relevant selection key  
till the desired quantity of coffee is obtained  
(max. 250 ml approx.).  
Co ffe e b le n d s  
Make sure coffee is fresh. An espresso roast is  
preferable.  
In order to obtain a strong and aromatic espres-  
so coffee, use special blends suitable for espres-  
so coffee machines and special cups with thick  
sides.  
Keep coffee in a cool place, in an hermetically  
sealed container.  
Pre -g ro u n d co ffe e  
During this operation, the following message is  
displayed:  
Em p ty co ffe e b e a n co n ta in e r  
W hen coffee beans run out, the coffee grinder  
stops and the following message is displayed:  
Make sure to use pre-ground coffee only (medium  
ground). Never use whole beans or soluble  
coffee.  
"1 SMALL COFFEE "  
"PROG. QUANTITY "  
"COF. BEANS EMPTY "  
The ma chine considers a utoma tica lly the  
necessary amounts to brew two cups of coffee.  
Fill the container and restart the cycle.  
O p e ra tio n tim e  
The machine may be kept on all day long.  
However, in case of a prolonged period of  
idleness, it is advisable to enable the energy  
Em p ty w a te r ta n k  
Right before brewing coffee, fill the container  
with freshly ground coffee. For best results, make  
sure coffee blend is fresh.  
Remember that ground coffee ages soon, thus  
losing its quality!  
Atte ntion!Ifthe pre-brewing functionisenabled  
during the cups dosage adjustment, keep the  
selected key pressed even during the pump stop  
until the desired amount is reached.  
W hen water runs out, the program stops  
automatically and the following message is  
displayed:  
saving function by pressing the standby  
switch. If the timer is properly programmed, this  
operation is automatic: for this purpose, see  
page 84.  
In case of a prolonged period of idleness, it is  
advised to switch the main switch (4) off; once  
switched on again, the machine will be ready to  
be used within two minutes.  
"WATERTANK EMPTY "  
Do u b le q u a n tity o f co ffe e o r 2 cu p s o f  
co ffe e  
By pressing one of the three selection keys twice,  
before coffee dispensing begins, the machine  
will brew a double portion of coffee.  
3 5  
Important!  
Fill the tank and restart the cycle.  
Use the measuring spoon supplied to fill the  
container (14) with a single portion of ground  
coffee! Use a full measure only.  
Gro u n d s co n ta in e r w a rn in g lig h t  
As soon as there are 30 grounds in the container,  
the following message is displayed:  
Sw itch in g o ff th e m a ch in e  
Switch the machine off only after the coffee cycle  
has been concluded.  
Co ffe e g rin d in g  
3 4  
This machine grinds a portion of fresh coffee for  
To dispense coffee, press pre-ground coffee  
"DREGDRAWER FULL "  
"READY FOR USE "  
button  
and the desired selection key (large  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BREW ING  
SAFETY DEVICES  
89  
90  
coffee, coffee, small coffee) to obtain a cup of  
coffee.  
rature, close the knob and immediately clean the  
spout with a damp cloth.  
cappuccino selection key.  
"HOT WATER  
"PROGR. QUANTITY "  
"
Cappuccino dispensing can be adjusted by turning  
the special Cappuccinatore adjustment valve (28).  
Note: it is suggested to use milk with low fat  
amounts (1.5%).  
Atte n tio n : the spout is hot, it may cause burns!  
Im p o rta n t! This function does not allow the  
double coffee cycle.  
3 6  
Ca p p u ccin o  
Place a glass or cup under the steam/ hot water  
spout (7), then press the hot water selection key.  
Hot water will be automatically dispensed.  
Throughthe specialCappuccinatore, thismachine  
canbrew a realcappuccino withoutanyproblem.  
By pressing the cappuccino button, these two  
messages will be alternately displayed:  
Dispensing may be interrupted by pressing one  
of the coffee selection keys, if an excessive water  
amount has been selected.  
Ca p p u ccin a to re cle a n in g  
Letthe Cappuccinatore draina fullwatercontainer  
after each cappuccino dispensing: in this way,  
the device will be perfectly cleaned.  
Ste a m d isp e n sin g  
To heat milk or other drinks.  
Ho t w a te r d isp e n sin g  
"CAPPUCCINO  
"
Hot water dispensing is accomplished through  
an independent water circuit which ensures the  
correct temperature and supplies tasteless hot  
water to be used for tea, soup, etc.  
In co rp o ra te d sa fe ty d e vice s  
Au to m a tic o ff  
Should the service door be open, the machine  
automatically switches off. If the central unit is not  
mounted, only water and steam can be  
dispensed.  
"READY FOR USE "  
"SELECT FOR USE "  
"READY FOR USE "  
Always clean the spout with a damp cloth soon  
after the use; otherwise, it might be difficult to  
remove milk residues.  
By operating the hot water key, the following two  
messages will be displayed:  
That is because the machine, as mentioned  
before, can dispense two products at the same  
time.  
Ele ctro n ic g rin d in g tim e co n tro l  
As soon as the coffee bean container is empty,  
grinding automatically stops after 20 seconds  
approx. Fill the container with coffee beans, as  
shown at page 80.  
"HOT WATER  
"
After a steam outflow, always drain the machine.  
"READY FOR USE "  
By turning steam knob (9), these two messages  
will be displayed:  
USER MAIN TEN AN CE  
IN STRUCTIO N S  
"SELECT PRODUCT "  
"READY FOR USE "  
Ele ctro n ic p u m p co n tro l  
IN CO RPO RATED SAFETY DEVICES  
"STEAM  
"
The machine switches off automatically as soon  
as the water in the tank is under the minimum level  
checked by a special water level indicator (73).  
Fill the tank according to the procedure shown at  
page 80.  
Thishappensbecause the machine, asmentioned  
before, can dispense two products at the same  
time.  
During hot wa ter dispensing, only the  
progra mmed a mount is dispensed if the  
corresponding programming is enabled. On the  
contrary, dispensing should be stopped by  
pressing again the selection key when the desired  
amount is reached.  
"READY FOR USE "  
During the cappuccino dispensing, only the  
progra mmed a mount is dispensed if the  
corresponding programming is enabled. On the  
contrary, dispensing should be stopped by  
pressing again the selection key when the desired  
cappuccino amount has been reached.  
To program the cappuccino amount, it is  
necessary to keep the corresponding selection  
key pressed till the desired amount is reached.  
"SELECT PRODUCT "  
"READY FOR USE "  
Thishappensbecause the machine, asmentioned  
before, can dispense two products at the same  
time.  
Ele ctro n ic te m p e ra tu re a d ju stm e n t  
Said adjustmentcontrolsthe correcttemperature to  
brew coffee and to dispense hot water and steam.  
Coffee brewing isautomaticallyinterrupted should  
the water temperature be excessive (safety  
thermostat and overheating safety device  
activated).  
If hot water only is dispensed, dispensing is faster  
than when coffee is dispensed at the same time.  
Direct steam/ hot water spout (7) on cup holder  
grill (3) and slightly open knob (9), turning it  
counterclockwise.  
W ait until the remaining water has flown out of  
the spout. Then, move the spout outwards and  
plunge it deeply into the fluid to be heated.  
Atte ntion: ca p p uccino a m ount ca n only  
b e p ro g ra m m e d if th e co rre sp o n d in g  
p ro g ra m m in g fu n ctio n is e n a b le d (se e  
p a g e 8 3 ).  
To program the hot water amount, it is necessary  
to keep the corresponding selection key pressed  
till the desired amount is reached.  
An tig ra ve l d e vice  
Even selected coffees may contain impurities.  
To avoid damages, the coffee grinder is fitted  
with an antigravel device against impurities.  
Should gravel end up into the coffee grinder, you  
will hear a strong and characteristic noise. Stop  
the machine immediately otherwise the machine  
will automatically stop within 20 seconds thanks  
Atte n tio n : h o t w a te r ca n o n ly b e  
p ro g ra m m e d if th e co rre sp o n d in g  
p ro g ra m m in g fu n ctio n is e n a b le d (se e  
p a g e 8 3 ).  
3 8  
3 7  
For cappuccino dispensing, fit suction pipe (26) of  
the Cappuccinatore (25) in a milk container or in  
another container. To prevent milk container  
deformation, pierce it on the top to allow air entry.  
Place the cup under dispenser (27) and press the  
Slowly open the steam/ hot water knob and heat  
the fluid, with a circular movement from the  
bottom to the top.  
During the programming phase, the following  
message will be displayed:  
W hen the fluid has reached the desired tempe-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CLEANIN G AND MAINTEN AN CE O PERATIO NS  
DESCALING  
91  
92  
to the special electronic protection system.  
Im p o rta n t: Do not start the machine before  
the foreign body has been removed, otherwise  
the motor may be damaged. Procedures: see  
page 92, points 45-49.  
operations. Unloose the screws and rinse the  
dispensing tube thoroughly with hot water.  
irre p a ra b le d a m a g e s to th e m a ch in e !  
Assemble the grind ring support and make sure  
the blue marks coincide.  
W a rn in g : if the central unit is not correctly  
fitted, the following message will be displayed:  
From time to time, clean the machine casing with  
a damp cloth and dry it.  
5 0  
Turn the adjustment ring clockwise, to make the  
red marks coincide.  
"BREW UNIT MISS "  
The machine cannot dispense coffee.  
Co ffe e g rin d e r  
Cle a n in g a n d m a in te n a n ce o p e ra tio n s  
Clean pre-ground coffee container (14) with the  
aid of the brush supplied, whenever necessary.  
5 1  
Ge n e ra l cle a n in g  
To ensure a good coffee quality and a longer  
working life, always keep the machine clean.  
Fit the adjustment lever on the ring, until it  
coincides with the previously set grinding degree.  
Ce n tra l u n it  
Clean central unit (22) whenever the coffee  
bean container is filled, or at least once a week.  
Ca p p u ccin a to re  
5 2  
Switch off the machine and open service door  
(19). Remove grounds coffee container (1).  
To quickly clean the cappuccinatore, immerse  
the suction pipe into warm water and let water  
flow through it.  
For a more accurate cleaning, remove the  
cappuccinatore and open cover (29). Clean the  
outside part with warm water and rinse it with  
cleaned water.  
Never fill the coffee grinder with water: it may  
irreparably damage the machine!  
Before cleaning the machine, turn off the main  
switch, unplug the machine and wait until it  
cools down.  
4 1  
4 5  
Remove central unit (22), by holding the handle  
and shortly pressing the PRESS key.  
Clean the coffee beans container periodically;  
th is o p e ra tio n sh o u ld b e a cco m p lish e d  
b y a q u a lifie d te ch n icia n ! Unplug the  
machine.  
Empty the coffee container and unloose the two  
fastening screws. Now, the container can be  
removed and cleaned.  
W ash the central unit with hot water; d o n o t  
u se a n y so lve n t.  
Do not immerse the machine into water or other  
fluids: it may be irreparably damaged!  
De sca lin g  
4 2  
Attention: The d esca ling op era tions m us  
b e ca rrie d o u t w h e n th e m a ch in e  
com p one nts a re cold .  
Make sure there are no coffee residues on the  
two steel filters: the upper filter can be removed  
by unloosening and turning the plastic pin  
anticlockwise using the tool supplied.  
Dry thoroughly each central unit component, fit  
the filter again and tighten it properly with the  
screw .  
4 6  
Do not wash parts of the machine in the  
dishwasher!  
Carefully pull the adjustment lever upwards,  
previously writing the set grinding degree.  
Descaling removes limescale from all surfaces  
and holes, thus ensuring a perfect operation of  
valves, heating controls and other important  
parts.  
4 7  
Turn the adjustment ring counterclockwise, until  
the blue marks coincide.  
Always handdry all parts of the machine, do not  
dry them in the oven or microwave oven!  
4 3  
N o te : due to the complexity of the coffee  
machine hydraulic circuit, the following descaling  
cycles (automatic and standard) do not allow the  
descaling of all tubes.  
In fa ct, e a sily a cce ssib le co m p o n e n ts  
su ch a s th e ce n tra l u n it (2 2 ) a n d its  
p la stic co n n e ctio n a re e x clu d e d .  
Remove coffee rest drawer (23) and clean it,  
using a non-abrasive solvent.  
Clean the service area thoroughly and fit the  
coffee rest drawer again.  
4 8  
W a te r ta n k , d rip tra y , co ffe e g ro u n d s  
co n ta in e r a n d co ffe e d isp e n se r  
3 9  
In order to keep the service area and the central  
unit (22) clean, daily empty the coffee grounds  
container (1), after machine use.  
Now, it is possible to remove the grinding ring  
from the machine, slightly pulling it upwards.  
4 9  
4 4  
W ith the aid of a brush or a narrow vacuum  
hose, clean both the gear box and the grind ring  
support.  
By holding the central unit by its handle, slide it  
back into its original position, making sure it is  
correctly engaged. Then close the door. Fit the  
coffee grounds container again.  
The machine must be descaled every 3-4 months,  
depending on the water hardness degree.  
A more frequent descaling is recommended  
wherever the water hardness degree is very high.  
To avoid dangerous delays to users, this machine  
is supplied with a special control counter,  
reminding the user to perform this operation,  
according to the water hardness degree.  
The water tank (11), drip tray (2), cup holder grill  
(3) and coffee grounds container (1) should be  
washed periodically, using a non-abrasive solvent  
and drying them carefully.  
Make sure the position of the grind ring does not shift.  
To reassemble the coffee grinder, carry out the  
reverse sequence, making sure the adjustment  
ring has not been shifted during cleaning. If that  
is the case, turn it until the blue mark coincide  
with one of the three notches.  
4 0  
W h e n fittin g th e ce n tra l u n it, d o n o t  
p re ss “ PRESS” b u tto n : it m a y ca u se  
Coffee dispenser(4)maybe removed forcleaning  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DESCALING  
DESCALING  
93  
94  
In this case, the following message will be  
displayed:  
Pour a discaling solution into the water tank  
(according to the instructions on the product  
package). Switchthe machine onthe programming  
mode. Place a large container under the steam/  
hot water spout and open slowly the steam knob.  
The automatic descaling starts: Small amounts of  
descaling solution are pumped into the circuit.  
Then the pump stops to let the solution take effect.  
During this phase, the following message is  
displayed:  
The following message will be displayed:  
occurring as a result of the non-observance of  
descaling procedures, improper use and non-  
observance of any other instruction contained  
herein. Maintain the manufacturer’s adjustment if  
the water hardness degree is not known.  
"DESCALING  
"
"RESET DESCALING "  
"NO  
"
W hen this message is displayed, the machine  
does not stop; however, it is suggested to descale  
quickly the machine.  
To cancel the message, see programming menu  
indications, point 14.  
By means of the same keys  
, it is possible  
Disp o sa l  
to modify the value; Ye s or n o .  
Machines which are no longer operational  
should immediately be made non serviceable,  
by cutting the power cord. Machines should be  
delivered to a public disposal centre.  
Switch off and unplug the machine if it will not be  
used for long periods.  
Through this reset operation, the internal counters  
of the two water systems are reset and the  
message DESCALE is erased.  
The machine has been adjusted on a 25°òH  
value, which causes the warning light to switch  
on after 150 l approx.  
If the function  
"MACHINE IS  
"DESCALING  
"
"
"SIGN. DESCAL. "  
Cut the supply power cord and deliver the  
machine to a public collecting point.  
Should it be necessary, the water hardness value  
may be exactly programmed, following the  
instructions shown at page 82.  
After approx. 45 minutes, when the procedure is  
accomplished, the following message will be  
displayed:  
is selected without the displayed message  
De sca le, the following message will be  
displayed:  
"DESCALING  
"FINISHED  
"
"
The following adjustments are possible:  
Ha rd n e ss 4: high water hardness, over 29°òH  
(14°dH), i.e. 80 l water approx.  
Ha rd n e ss 3:medium water hardness, approx.  
20-29°òH (7-14°dH), approx. 150 l water  
passage.  
Ha rd n e ss 2:soft water, approx. 12-20°òH  
(4-7°dH) approx. 300 l water passage  
Ha rd n e ss 1:very soft water, less than 10°òH  
(3°dH), approx. 500 l water passage  
Should the machine not be used anymore,  
switch it off and unplug it.  
"QUANTITY WATER "  
"NOT REACHED  
"
Close the steam knob. The pump stops.  
Press EN T button. A display message reminds  
youto rinse awayanypossible descaling residues  
from the machine.  
Sta n d a rd d e sca lin g  
Switch off the machine. Pour a descaling solution  
into the water tank (according to the instructions  
on the product package). Place a large container  
under the steam/ hot water spout (7). Switch the  
machine on by pressing the main switch, press  
the hot water key and let the descaling solution  
in the water tank pour out of the spout for 1 minute  
approx.  
Keep the machine in a dry place, far from the  
reach of children.  
Should the machine not be used for a long  
period, keep it from dust and dirt  
"RINSE MACHINE "  
Remove water tank, rinse it accurately and fill it  
with fresh water. Clean the machine using the  
hot water knob and let the whole tank content  
flow out. The following message willbe displayed:  
Ma in te n a n ce  
In hard water regions, a filter should be used both  
to improve the coffee quality or to protect the  
machine, thus reducing the descaling frequency.  
Periodically check the machine working and  
clean it in accordance to the instructions.  
Press hot water key to complete the operation.  
Switch the machine off and let the solution taking  
effect for 5 minutes approx. Repeat this procedu-  
re two or three times, to empty the water tank.  
Tro u b le sh o o tin g  
"RINSING  
"FINISHED  
"
"
N o te: for this purpose, use a descaling product  
suitable for coffee machines.  
N e ve r u se vin e g a r!  
In case of failure, fault or suspected damage  
following a fall, unplug the machine immediately.  
Press the hot water key again. Go back to  
programming function by pressing theEN T key.  
Descaling can be performed in two ways:  
As soon as descaling has been performed, rinse  
the water tank (11) thoroughly and fill it with fresh  
water.  
Switch on the machine again and let water (2  
l approx.) flow out of the steam/ hot water  
dispensing tube in order to rinse away residues.  
Au to m a tic d e sca lin g  
Select this mode in the programming menu (see  
page 84).  
To fix problems, follow the instructions in the  
table. Otherwise contact authorised personnel.  
Only skilled personnel are authorised to repair  
the machine. The user might incur serious injuries  
should repairs not be properly carried out.  
The ma nufa cturer declines a ny lia bility  
whatsoever, should repairs fail to be carried out  
according to the instructions contained in this  
manual: Furthermore in these cases warranty  
rights cannot be honored.  
N o te: By pressing the ESC key, it is possible to  
quit descaling procedure.  
By means of keys  
, move the asterisk at  
Re se t d e sca lin g m e ssa g e  
the end of the line on the menu itemDe sca lin g  
and confirm the selection with the EN T key.  
The following message will be displayed:  
Inprogramming function, bypressing keys  
,
Im p o rta n t:  
move the asterisk till the end of the line on the menu  
Sig n. De sca l and confirm the selection with  
ENT button.  
A periodic descaling ensures a correct machine  
functioning and avoids expensive repairs. The  
machine warranty does not cover damages  
"13 DESCALING  
"
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPO RTANT SAFEGUARDS  
TRO UBLESHO O TING  
78  
95  
Tro u b le  
Po ssib le ca u se s  
So lu tio n  
IMPO RTANT SAFEGUARDS  
No message is displayed  
The machine is not getting power Turn the main switch on, check  
plug and fuse  
W hen using your coffee maker, basic safety  
precautions should always be followed, in-  
cluding the followed to reduce the risk of  
fire, electric shock, and/ or injury to persons  
including the following:  
1 Read all instructions.  
2 Do not touch hot surfa ces. Use  
handles or knobs.  
3 To protect against electric shock, do  
not place cord, plug or appliance in water  
or other liquid.  
4 Close supervision is necessary when  
any appliance is used by or near children.  
5 Unplug from the outlet when not in  
use and before cleaning. Allow to cool  
before putting on or taking off parts, and  
before cleaning the appliance.  
damaged in any manner. Return appliance  
to a n a uthorised service fa cility for  
examination, repair or adjustment.  
7 The use of a n a cce ssory not  
evaulated for use with this appliance may  
cause injuries.  
The service door is open  
Close the service door is  
Properly fit and lock the central  
unit  
The automatic coffee brewing  
does not start  
BREW UNITMISS.  
Clean the central unit (see page  
91)  
BREW UNITBLO CK.  
8 Do not use outdoors.  
9 Do not let cord hang over edge or  
table or counter, or touch hot surfaces.  
10 Do not place on or near a hot gas  
or electric burner, or in a heated oven.  
11 Always attach plug to appliance first,  
then plug cord into the wa ll outlet. To  
disconnect, turn a ny control to the off  
position, then remove plug from wall outlet.  
12 Use this a pplia nce only for its  
intended use as described in this manual.  
13 Keep the cord away from heated  
surfaces.  
Fill with water or coffee beans  
and restart the cycle  
W ATERTANK  
EMPTY  
COF. BEANS  
EMPTY  
The automatic coffee brewing  
does not start  
Fit the coffee grounds container  
properly  
DREGDRAW ER MISS.  
Service the coffee grinder (see  
page 92)  
GRINDER BLO CKED  
Steam and hot water are not The steam/ hot water spout hole  
Clear the hole with the aid of a  
thin needle  
dispensed  
is clogged  
6 Do not operate any appliance with  
a da ma ged cord or plug or a fter the  
a pplia nce ma lfunctions, or ha s been  
Coffee is dispensed too quickly Grinding too coarse  
Adjust the grinder on a finer  
grinding, e.g. from 5 to 3  
Adjust the grinder on a coarser  
grinding, e.g. from 5 to 7  
The central unit filter is clogged  
Clean the filter  
Coffee is dispensed too slowly Grinding too fine  
SAVE THESE INSTRUCTIO NS  
Coffee is not hot enough  
The cup has not been preheated Heat the cup on the heating  
plate  
Coffee is not creamy enough  
The coffee blend is not suitable  
or is not fresh. Grinding is not  
correct (too fine or too coarse)  
Try another coffee blend  
WARNING  
The machine coffee brewing is Descaling the machine  
reduced, it takes longer to heat  
Desca le the ma chine, a s  
described at page 92  
RISK OF FIRE OR ELECTRIC SHOCK  
DO NOT OPEN  
and the dispensing isnotsufficient  
The central unit cannot be The central unit has not been Switch the machine on, close  
removed  
correctly positioned  
the service door, fit the coffee  
grounds container and wait until  
the machine resets.  
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK.  
DO NOT REMOVE COVER (OR BACK)  
NO USER-SERVICEABLE PARTS INSIDE  
REPAIR SHOULD BE DONE BY AUTORIZED SERVICE PERSONNEL ONLY  
Download from Www.Somanuals.com. All Manuals Search And Download.  

QSC Audio DJ Equipment 10 SERIES User Guide
Radio Shack Network Card 273 329 User Guide
Renesas Computer Hardware RSKM16C62P User Guide
RIDGID Saw R843 User Guide
Runco Computer Monitor CP 42HD User Guide
Ryobi Saw ts1341 User Guide
Samsung Car Video System GH17LS User Guide
Samsung Cell Phone 66988 User Guide
Samsung Security Camera SCC B1031P User Guide
Sanyo CRT Television DS27820 User Guide