54M Wireless AP Router RNX-G400
User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
54M Wireless AP Router RNX-G400
User Manual
1.1 Windows 2000
Please follow the steps below to setup your computer:
1. Go to Start Æ Settings Æ Control Panel
Figure 2-1
2. Double click the icon Network and Dial-up Connections
3. Highlight the icon Local Area Connection, right click your mouse, Click Properties
Figure 2-2
3
Download from Www.Somanuals.com. All Manuals Search And Download.
54M Wireless AP Router RNX-G400
User Manual
4. Highlight Internet Protocol (TCP/IP), then press Properties button
Figure 2-3
5. Choose Obtain an IP address automatically and Obtain DNS server address automatically, then press OK to
close the Internet Protocol (TCP/IP) Properties window
Figure 2-4
4
Download from Www.Somanuals.com. All Manuals Search And Download.
54M Wireless AP Router RNX-G400
User Manual
6. Press OK to close the Local Area Connection Properties window
Figure 2-5
1.2 Windows XP/2003
Please follow the steps below to setup your computer:
1. Go to Start Æ Settings Æ Control Panel
2. Click Network and Internet Connections
Figure 2-6
5
Download from Www.Somanuals.com. All Manuals Search And Download.
54M Wireless AP Router RNX-G400
User Manual
3. Click Network Connections
Figure 2-7
4. Highlight the icon Local Area Connection, right click your mouse, Click Properties
Figure 2-8
6
Download from Www.Somanuals.com. All Manuals Search And Download.
54M Wireless AP Router RNX-G400
User Manual
5. Highlight Internet Protocol (TCP/IP), then press Properties button
Figure 2-9
6. Choose Obtain an IP address automatically and Obtain DNS server address automatically, then press OK to
close the Internet Protocol (TCP/IP) Properties window
Figure 2-10
7
Download from Www.Somanuals.com. All Manuals Search And Download.
54M Wireless AP Router RNX-G400
User Manual
7. Press OK to close the Local Area Connection Properties window
Figure 2-11
8
Download from Www.Somanuals.com. All Manuals Search And Download.
54M Wireless AP Router RNX-G400
User Manual
2 Connection the Router
After configuring the TCP/IP protocol, use the ping command to verify if the computer can communicate with the Router.
To execute the ping command, open the DOS window and ping the IP address of the Broadband Router at the DOS
prompt : To execute ping command, open the DOS window by clicking on Start -> Run. In the Run window, type CMD. At
the DOS prompt, type the following command:
If the Command window returns something similar to the following:
Figure 3-1
Then the connection between the router and your computer has been successfully established.
If the computer fails to connect to the router, the Command window will return the following:
Figure 3-2
Verify your computer's network settings are correct and check the cable connection between the router and the
computer.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
54M Wireless AP Router RNX-G400
User Manual
3 Accessing the Web-Based Configuration Utility
z
z
After connected to the device, you will be prompted to enter the username and password. Type “guest” in the User
Name field, the default password is “guest”.
Figure 4-1
4 Quick Configuration for the Router
After login, the Broadband Router’s web-based management is accessible.
z
z
Click the WAN Setup page link to configure the WAN interface.
Select the Internet connection type
The WAN Setup page configures the Internet connection of the Broadband Router. Consult your ISP if you are unsure
about which Internet connection type to use. Select the correct protocol for your ISP from the table below. See the User
Manual for more information.
Dynamic IP Address
Figure 5-1
10
Download from Www.Somanuals.com. All Manuals Search And Download.
54M Wireless AP Router RNX-G400
User Manual
PPPoE
Input your PPPoE Account and Password you get from your ISP.
Figure 5-2
Static IP
Figure 4-3
11
Download from Www.Somanuals.com. All Manuals Search And Download.
54M Wireless AP Router RNX-G400
User Manual
z
After selecting the proper WAN connection setting, click Apply to save and enable these settings with the
Router.
5 Checking the Connection to the Internet
To check the connection to the Internet, you can open the Web browser and go to a website. You can also go to the
System Overview page of the router’s Web -based configuration utility. The WAN Interface group will display the current
connection information.
Congratulations! You’ve successfully configured your Router.
Thank you for purchasing a quality Rosewill Product.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
54M Wireless AP Router RNX-G400
User Manual
13
Download from Www.Somanuals.com. All Manuals Search And Download.
|