500Mbps Powerline Gigabit Ethernet Adapter
RPLC-500
User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
500Mbps Powerline Gigabit Ethernet Adapter KIT
- RPLC-500KIT-
User’s Manual
Package Contents
The following items should be found in your package:
2x Rosewill RPLC-500 500Mbps Powerline Gigabit Ethernet Adapter
2x RJ45 Ethernet Cable
1x Quick Installation Guide
1x Resource CD for RPLC-500, including:
Rosewill Powerline Utility
Quick Installation Guide
User Guide
Note:
Make sure that the package contains the above items. If any of the listed items are damaged
or missing, please contact with your distributor.
-3-
Download from Www.Somanuals.com. All Manuals Search And Download.
500Mbps Powerline Gigabit Ethernet Adapter KIT
- RPLC-500KIT-
User’s Manual
Chapter 1 Introduction to Hardware
Thank you for purchasing Rosewill‟s RPLC-500 Homeplug AV compliant
Powerline Adapter. The RPLC-500 adapter can transmit data up to 500mbps via
household‟s power outlet. RPLC-500 can help you to establish a high-speed
network that supports video, voice and data without wiring and drilling. It is
suitable for using in a wide range of both residential (at home) and commercial
(offices, apartments, hotels, warehouses) network applications.
1.1 Expanding your Network with RPLC-500
The RPLC-500 plugs into an power outlet to extend cable or DSL modem
connection or your current Ethernet Network to almost any power outlet in your
home with any new cabling.* Devices can securely communicate with each other
via the 128-bit Advanced Encryption Standard (AES) through RPLC-500 at a
high speed transfer rate of 500Mbps and Gigabit LAN support.
Note:
Powerline Technology has certain limitations.
1. The best performance for Powerline Data transmission will be under one power circuit
2. Performance may be decreased under different circuits but within one Electricity Meter
due to the drop-off via hardware.
1.2 Key Features
Plug and Play with Quick and Easy Installation
Installation requires no new wiring
Every power socket becomes a connection node in the household.
RPLC-500 supports connection for a total of 8 nodes.
Plug-and-play to your routers, computers and other network devices.
Power up your Network with Ultra fast speed
Physical data rate is up to 500Mbps.
Ethernet Speed is up to 1000Mbps
Enjoy Stable HD Videos and Gaming
-4-
Download from Www.Somanuals.com. All Manuals Search And Download.
500Mbps Powerline Gigabit Ethernet Adapter KIT
- RPLC-500KIT-
User’s Manual
With a pair of plug-and-play RPLC-500 installed, you can easily extend
your home network through any electrical outlet for Internet access by
HDTVs, Blu-ray™ players, DVRs, PCs and game consoles.
QoS Management Enhances Streaming Quality
RPLC-500 supports 4-level type QoS and 8-level VLAN priority fields
which automatically improves the streaming quality
Green Feature for Power saving mode
RPLC-500 will detect signals when there is no signal transmit, it will
automatically enters Power Saving mode which saves near 80% of the
energy consumption.
1.3 Application
High Definition (HD) and Standard Definition (SD) video distribution
Higher data rate broadband sharing for Powerline LAN
Shared broadband internet access
TV over IP (IPTV) and Voice over Internet Protocol (VoIP)
-5-
Download from Www.Somanuals.com. All Manuals Search And Download.
500Mbps Powerline Gigabit Ethernet Adapter KIT
- RPLC-500KIT-
User’s Manual
1.4 System Requirement
If need to use Powerline Utility: Operating system: Windows 98SE, 2000, ME,
XP 32/64 bit and Vista 32/64bit, otherwise, no OS require
CPU: Intel Pentium III or better, clock rate faster than 2.0GHz recommended
RAM: At least 128MB
Screen resolution: Any resolution
Free disk space: At least 20MB
Network interface: At least one Fast Ethernet (100 Mbps) network card, and
a Ethernet Cord
1.5 Hardware Diagram of RPLC-500
-6-
Download from Www.Somanuals.com. All Manuals Search And Download.
500Mbps Powerline Gigabit Ethernet Adapter KIT
- RPLC-500KIT-
User’s Manual
1.5.1 LED
LED
Color
Green
Green
Behavior Description
On
System runs normally.
System is resetting.
Blink
(Power)
System is in the process of
password synchronization.
System is in Power Saving mode
The PLC adapter is powered off.
Ethernet connection has established.
Data is being transmitted.
-
Off
Green
On
Blink
Off
(Ethernet)
(Data)
-
No Ethernet connection.
Green/Orange/Red
On
The PLC adapter has connected to the
powerline network. The Data LED color
may vary according to the Data
Transmit Quality.
Green: Data Transmit Quality Excellent
Orange: Data Transmit Quality Average
Red: Data Transmit Quality Poor
The PLC adapter does not connect to
the powerline network.
-
Off
1.5.2 Powerline Adapter’s Button and Connector
Reset: Pressing and holding the Button for between 10 seconds and 15 seconds
makes the adapter restore the factory default settings.
Security: Pressing and holding the button for less than 3 seconds makes the
adapter a member of the existing Powerline Network.
Ethernet Port (RJ45 Port): The Ethernet port connects to an Ethernet network
cable. The other end of the cable connects to your computer or other
Ethernet-enabled network device.
Connecting to the router/modem: Insert One end of the RJ45 Cable
(Recommend using Cat 5E cable or above) to this port, and the other end to the
router or modem. Then plug into the electrical outlet.
-7-
Download from Www.Somanuals.com. All Manuals Search And Download.
500Mbps Powerline Gigabit Ethernet Adapter KIT
- RPLC-500KIT-
User’s Manual
Connecting to PC / Smart TV / NB / Blu-ray Player / Media Player / IP
Phone: Insert One end of the RJ45 Cable (Recommend using Cat 5E cable or
above) to this port, and the other end to the other devices. Then plug into the
electrical outlet.
Chapter 2 Introduction to Utility
Note:
Before installing the PLC utility software, make sure that there is no any other powerline
utility installed on your computer. If there is another utility installed, please uninstall it and
restart your computer.
2.1 Utility Installation
Please follow the steps below to install the utility.
1. Please insert the utility CD into the computer‟s CD-ROM drive. Select the
Utility Installation from the Wizard Page.
-8-
Download from Www.Somanuals.com. All Manuals Search And Download.
500Mbps Powerline Gigabit Ethernet Adapter KIT
- RPLC-500KIT-
User’s Manual
2. The window for installing the utility software will display. Click Next to
continue.
-9-
Download from Www.Somanuals.com. All Manuals Search And Download.
500Mbps Powerline Gigabit Ethernet Adapter KIT
- RPLC-500KIT-
User’s Manual
3. Select I Agree, and then Next to continue.
4. You can choose your own destination folder to install or click Browse… to
select the installation folder, and then click Next to continue..
-10-
Download from Www.Somanuals.com. All Manuals Search And Download.
500Mbps Powerline Gigabit Ethernet Adapter KIT
- RPLC-500KIT-
User’s Manual
5. You can choose your own destination folder to install or click Browse… to
select the installation folder, and then click Next to continue.
-11-
Download from Www.Somanuals.com. All Manuals Search And Download.
500Mbps Powerline Gigabit Ethernet Adapter KIT
- RPLC-500KIT-
User’s Manual
2.2 Utility Introduction
Click the desktop icon below to enter the configuration page.
2.2.1 Main Tab
The Main screen provides a list of all powerline devices logically connected to
the computer when the utility is running.The top panel shows the local
HomePlugAV devices connected to the network interface card (NIC) of the
computer. Click Connect. The utility automatically scans the powerline
periodically for other HomePlugAV devices connected to it. If no local
HomePlugAV device is discovered, the status bar displays NO HOMEPLUG
ADAPTERS DETECTED.
The lower panel displays all the HomePlugAV remote devices, which are
-12-
Download from Www.Somanuals.com. All Manuals Search And Download.
500Mbps Powerline Gigabit Ethernet Adapter KIT
- RPLC-500KIT-
User’s Manual
discovered in the current logical network. The total number of remote devices
connected in the same network is displayed above the remote device panel.
Network type (Public or Private) depends on the network status of the local
device. Autoscan shows whether the autoscan function is on. The following
information is displayed for all the devices that appear in the lower panel.
Device Name
This column shows the default device name, which may be modified. To
change the name, click Rename, or click the name and edit it in the list.
MAC Address
This column shows the MAC addresses of the remote devices.
Password
By default, this column is blank. You can click Enter Password to change it.
The steps for setting the password of the device (required when creating a
private network) are as follows:
Click the device name to select the device in the lower panel.
Click Enter Password. A dialog box appears, showing the device name
and password.
Click OK to verify the password. The password field accepts the device
-13-
Download from Www.Somanuals.com. All Manuals Search And Download.
500Mbps Powerline Gigabit Ethernet Adapter KIT
- RPLC-500KIT-
User’s Manual
password in any case formats, with or without dash.
A confirmation box appears if the password is entered correctly. If a device is
not found, a message appears, providing suggestions to solve the common
problems. This process might take a few seconds to get completed.
Add
This button is used to add a remote device to the existing network by
entering the device password of the device. A dialog box will appears. You
can enter a device name and the password. (Also refers as DEK on the back
Label, this DEK is generates via MAC address)
If the device is found and the password is entered correctly, a confirmation
box appears. If a device is not found, a message appears, providing
suggestions to solve the common problems.
Note:
The device must be in the powerline (plugged in), so that you can confirm the password and
add the device to the network. If the device is not located, a warning message appears.
Scan
This button is used to perform an immediate search for HomePlugAV
-14-
Download from Www.Somanuals.com. All Manuals Search And Download.
500Mbps Powerline Gigabit Ethernet Adapter KIT
- RPLC-500KIT-
User’s Manual
devices connected to the powerline network. By default, the utility
automatically scans every a few seconds and updates the displayed
information.
2.2.2 Privacy Tab
In the Privacy screen, you can maintain security for the logical network and
select the device included in the network.
All HomePlugAV devices are loaded using a default logical network (network
name), which is normally “HomePlugAV”. In the Privacy screen, you can modify
a private network by changing the network names and the passwords of the
devices.
You can always reset to the HomePlugAV network (Public) by entering
“HomePlugAV” as the network name or by clicking on the Use Default button.
Note:
If the network name changes to anything other than HomePlugAV, the network type in the
main screen is displayed as Private.
Set Local Device Only
-15-
Download from Www.Somanuals.com. All Manuals Search And Download.
500Mbps Powerline Gigabit Ethernet Adapter KIT
- RPLC-500KIT-
User’s Manual
This button is used to change the network name and password of the local
device. If a new network password is entered, all the devices appeared in
the main panel prior to this are no longer present in the new network,
effectively making the local devices not to communicate to the devices which
are in the old logical network. Click Set Local Device Only, the devices
previously set up with the same logical network (same network name)
appears in the device list.
Set All Devices
This button is used to change the logical network of all devices that appear
in the main panel. If these devices whose passwords have been entered for
the same logical network, a dialog box appears, indicating the success of
this operation. For the devices whose passwords are not entered, this
operation will fail and it will report a failure message.
2.2.3 Diagnostics Tab
The Diagnostics screen shows the system information and history of all remote
devices appeared over a period of time.
The Upper panel shows technical data concerning software and hardware on
the host computer that are used to communicate through HomePlug on the
powerline network. It includes the following:
Operating system platform/version
Host network name
User name
MAC address of all NICs (Network interface card) connected to the host
Identify versions of all driver DLLs and libraries used (NDIS) and
optionally
HomePlug chipset manufacturer name (Turbo Only devices)
MAC firmware version (Turbo Only devices)
MAC addresses of all devices connected locally to the host
Version of the configuration utility
Vendor name
-16-
Download from Www.Somanuals.com. All Manuals Search And Download.
500Mbps Powerline Gigabit Ethernet Adapter KIT
- RPLC-500KIT-
User’s Manual
The Lower panel displays the history of all remote devices appeared on the
computer over a certain period of time. All the devices and the parameters of the
devices on the powerline network are listed. Devices that are active on the
current logical network show a transfer rate in the rate column. Devices on other
networks, or devices that no longer exist are shown with a “?” in the rate column.
The following remote device information is available from the diagnostics screen:
Device alias name
MAC address
Password
Device last known rate
Device last known network name
HomePlug chipset manufacturer name
Date device last seen on the network
MAC firmware version
The diagnostics information displayed can be saved to a text file for later use, or
be printed for reference for a technical support call. Click Delete to delete the
devices which are no longer part of the network. A dialog window pops up with a
-17-
Download from Www.Somanuals.com. All Manuals Search And Download.
500Mbps Powerline Gigabit Ethernet Adapter KIT
- RPLC-500KIT-
User’s Manual
confirmation message if the user wants to delete a device whose password has
been entered.
2.2.4 About Tab
The About screen shows the software version and provides a html link to a
can visit the web site.
Chapter 3 Forming a Powerline (HomePlug
AV) Network
This chapter describes how to form a HomePlug AV logical network (AVLN) using
the Security pushbutton and using the Utility. Operation progress and outcome
can be monitored by observing the behavior of the power LED.
-18-
Download from Www.Somanuals.com. All Manuals Search And Download.
500Mbps Powerline Gigabit Ethernet Adapter KIT
- RPLC-500KIT-
User’s Manual
3.1 Using the Security Pushbutton
Scenario:
Devices A and B with different NMK (Network Membership Key used to
authenticate/access) values are connected to the same powerline. Users
want to use them to form a logical network.
Forming a HomePlug AV logical network
Please follow below steps to form a logical network using the Security
button:
1. Press the Security button on Device A for less than 3 seconds.
2. Press the Security button on Device B for less than 3 seconds. The
button on B must be pressed within 2 minutes
3. Wait for connection to complete.
The Power indicator on both devices will flash evenly at 1 second interval
until the operation succeeds or fails. The Power indicator will illuminate
steadily on successful completion. If an error occurs, the Power indicator on
both devices will flash unevenly for 2 minutes.
3.2 Using the Utility
Scenario:
Devices A and B are located in different networks. Users want to use them to
form a logical network.
In this case, using the Security pushbutton cannot pair Devices A and B.
Users can only use the Utility to form a logical network.
-19-
Download from Www.Somanuals.com. All Manuals Search And Download.
500Mbps Powerline Gigabit Ethernet Adapter KIT
- RPLC-500KIT-
User’s Manual
Please follow below to form a logical network using the Utility:
1. Connect Device A to the network card of a PC.
2. Open the Utility. The Main tab page displays information about Device A
after connection succeeds.
Search for Local device on your computer
3. Click the Privacy tab page. Enter a name in the Private Network Name
field.
Setting the network name for your PLC
4. Click Set Local Device Only. When the following page is displayed, the
setting succeeds. Now Device A has been removed from its logical
network.
Network name setting success
5. Repeat the procedures above to configure Device B. Configure Device
-20-
Download from Www.Somanuals.com. All Manuals Search And Download.
500Mbps Powerline Gigabit Ethernet Adapter KIT
- RPLC-500KIT-
User’s Manual
B with the same Private Network Name as Device A. After the
operation success, Devices A and B form a new logical network.
Chapter 4 Joining a Network
This chapter describes how to add a device to an existing HomePlug AV logical
network (AVLN) using the Security/Reset pushbutton and using the Utility.
Operation progress and outcome can be monitored by observing the behavior of
the power LED.
4.1 Using the Security Pushbutton
Scenario:
Devices A and B are located in network N. Device C (the joiner) that is not
located in any networks attempts to join Network N. Any devices on Network
N can become the „adder‟.
Joining a network
Please follow below to add Device C to Network N using the Security button:
1. Press the Security button on Device A (or Device B) for less than 3
seconds, making it the „adder‟.
2. Within 2 minutes, press the Security button Device C (the „joiner‟) for
less than 3 seconds.
3. Wait for connection to complete.
The Power indicator on Device A (or Device B) and Device C will flash at 1
second intervals until the process succeeds or fails. It will illuminate steadily
on success. If an error occurs, the Power indicator on Device A (or Device B)
-21-
Download from Www.Somanuals.com. All Manuals Search And Download.
500Mbps Powerline Gigabit Ethernet Adapter KIT
- RPLC-500KIT-
User’s Manual
and Device C will flash unevenly for 2 minutes.
4.2 Using the Utility
Scenario:
Devices A and B are located in Network N. Device C (the joiner) that is
located in another network attempts to join Network N. See
Do as follows to add Device C to Network N using the Utility:
1. Connect Device C to the network card of a PC.
2. Open the Utility. The Main tab page displays information about Device
C after connection succeeds.
3. Click the Privacy tab page. Enter a name in the Private Network Name
field.
4. Click Set Local Device Only. When the page shown as below
displayed, the setting success. Now Device C has been removed from
its logical network.
5. Press the pushbutton on Device A or B for less than 3 seconds, making
it the „adder‟.
6. Within 2 minutes, press the pushbutton on Device C (the „joiner‟) for
less than 3 seconds.
7. Wait for connection to complete.
The Power indicator on Device A (or Device B) and Device C will flash at 1
second intervals until the process succeeds or fails. It will illuminate steadily
on success. If an error occurs, the Power indicator on Device A (or Device B)
and Device C will flash unevenly for 2 minutes.
-22-
Download from Www.Somanuals.com. All Manuals Search And Download.
500Mbps Powerline Gigabit Ethernet Adapter KIT
- RPLC-500KIT-
User’s Manual
Appendix A: Improving the Transmission
Quality
It is important to use the PLC product complying with the following "correct rules",
because it can significantly improve the transmission capacity of the network.
For the PLC device without female socket, it is recommended to plug the device
directly into a wall socket, not to power stripe.
Appendix B: Specifications
Spec
Chipset
Atheros AR7400
Compliant with IEEE 1901
Standards
Encryption
Compatible with HomePlug AV standard
IEEE802.3, IEEE802.3u, IEEE802.3ab
128-bit AES Encryption
-23-
Download from Www.Somanuals.com. All Manuals Search And Download.
500Mbps Powerline Gigabit Ethernet Adapter KIT
- RPLC-500KIT-
User’s Manual
Ports
10/100/1000Mbps Ethernet port
Power, Ethernet, Data
LEDs
Powerline Speeds
Powerline Range
Up to 500Mbps
Up to 300 meters over Electricity line
Capable of extending up to total of 8 Powerline adapters in one
environment
Maximum PLC support
Connection Type
Connection Speeds
Kit Type
RJ45
10/100/1000M
Double
Frequency Band
2 MHz ~ 67.5 MHz
<4.0W Operation Mode
2.78W Idle Mode
Power Consumption
QoS Support
0.97W Standby Mode
ToS
Support up to 4-level type QoS
Support up to 8-level VLAN priority field
IGMP snooping for multicast to multiple unicast mapping
Deployment requirements:
Devices with 10/100 or 10/100/1000 Mbps Ethernet port
Operates system not require.
System Requirement
Utility software OS support:
Microsoft Windows 2000/XP/Vista/7
Dimensions
Weight
3.54 x 2.17 x 1.41 in (90 x 55 x 36 mm) (1 Powerline adapter)
0.24 lbs. (108 g) (1 Powerline adapter)
0°C ~ 40°C
Temperature
Humidity
10% ~ 90% Non-condensing
-24-
Download from Www.Somanuals.com. All Manuals Search And Download.
500Mbps Powerline Gigabit Ethernet Adapter KIT
- RPLC-500KIT-
User’s Manual
Appendix C: Acronyms and Abbreviations
AVLN
AV In-home Logical Network, the AVLAN
is the set of STAs that possess the same
network membership key. Every AVLN is
managed by a single CCo.
Central Coordinator
CCo
CSMA/CA
Carrier Sense Multiple Access / Collision
Avoidance
DAK
DM
Device Access Key
Device Manager
IGMP
NEK
NID
Internet Group Management Protocol
Network Encryption Key
Network ID (Identification)
Network Membership Key
NMK
PLC
PIB
Powerline Communication
Parameter Information Block
Station, a STA in the network with a
connection to the powerline and being
able to source or sink traffic
Time Division Multiple Access
Terminal Equipment Identifier
Type Of Service
STA
TDMA
TEI
TOS
VLAN
Virtual Local Area Network
Appendix D: RPLC-500 QoS Support
RPLC-500 allows for 4 levels of Channel Access Priority (CAP (0 – 3)). The 8
levels of VLAN Ethernet tags must be mapped to the 4 levels of CAP priority,
where CAP 3 is the highest priority and CAP 0 is the lowest. CAP 3 priority might
be used for voice and network management frames, and CAP 2 is used for
-25-
Download from Www.Somanuals.com. All Manuals Search And Download.
500Mbps Powerline Gigabit Ethernet Adapter KIT
- RPLC-500KIT-
User’s Manual
streaming video and music while CAP 1 and CAP 0 are used for data.
Default CAP
The „Default CAP‟ group allows for default priority mapping of packets that do not
have a VLAN TAG. The settings are available for Unicast (directed to a host).
Unicast - (default CAP 1) - sets the default channel access priority for
unicast frames not matching any other classification or mapping.
IGMP managed Multicast Stream (Fixed to CAP 2) - sets the default
channel access priority for stream data belonging to a snooped IGMP
multicast group.
IGMP - (default CAP 3) - sets the channel access priority for IGMP
frames - these are the group management frames, not the stream data.
Multicast/Broadcast - sets the default CAP for multicast frames not in a
snooped group and for broadcast frames.
The following are the factory default settings for VLAN Tags and TOS Bits:
VLAN Tag User
Default CAP
Priority
TOS Bit User
Default CAP
Priority
Priority
Priority
0
CAP1
0
CAP1
1
2
3
4
5
6
7
CAP0
CAP0
CAP1
CAP2
CAP2
CAP3
CAP3
1
2
3
4
5
6
7
CAP0
CAP0
CAP1
CAP2
CAP2
CAP3
CAP3
Thank you for purchasing a quality Rosewill Product.
support for your product.
Rosewill Customer Service Hotline: 1-800-575-9885
Rosewill Customer Service Support: [email protected]
-26-
Download from Www.Somanuals.com. All Manuals Search And Download.
500Mbps Powerline Gigabit Ethernet Adapter KIT
- RPLC-500KIT-
User’s Manual
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice.
is a registered
trademark of Rosewill Inc. Other brands and product names are trademarks or
registered trademarks of their respective holders.
No part of the specifications may be reproduced in any form or by any means or
used to make any derivative such as translation, transformation, or adaptation
without permission from Rosewill Inc. Copyright © 2010 Rosewill Inc. All rights
reserved.
Safety Warning
This device is intended for connection to the AC powerline. For installation instructions, please
refer to the installation section of this guide. The following precautions should be taken when
using this product.
Read all instructions before installing and operating this product.
Follow all warnings and instructions marked on the product.
Unplug the device from the wall outlet before cleaning. Use a damp cloth for cleaning. Do
not use liquid cleaners or aerosol cleaners.
Do not operate this product near water.
This product should never be placed near or over a radiator or heat register.
Do not use an extension cord between the device and the AC power source.
Only a qualified technician should service this product. Opening or removing covers may
result in exposure to dangerous voltage points or other risks.
Do not plug the device into a power strip or surge protector because these devices may
consist of filter and impair signal.
Avoid plugging the device right next to noisy sources such as cell phone charger, Halogen
light, noisy desktop computer, vacuum cleaner, etc. These cases result in poor
transmission speed.
Unplug the device from the wall outlet and refer the product to qualified service personnel
for the following conditions:
If liquid has been spilled into the product
If the product has been exposed to rain or water
If the product does not operate normally when the operating instructions are followed
If the product exhibits a distinct change in performance
Your product is marked with this symbol, which is known as the WEEE mark. WEEE
stands for Waste Electronics and Electrical Equipment. It means that used electrical
and electronic products should not be mixed with general waste. Used electrical
and electronic equipment should be treated separately.
-27-
Download from Www.Somanuals.com. All Manuals Search And Download.
|