Quick Start Guide
GM Series5
Multimedia Navigation System
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTICE OF INTENDED USE
Some features of Rosen Electronics are not intended for viewing by the driver when the vehicle is in motion, such as movie
playback. When using navigation, minimize the amount of time spent viewing the screen and use voice prompts as much
as possible. Avoid prolonged use of the touch screen controls. Such use might distract the driver or interfere with the
driver’s safe operation of the vehicle, and thus result in serious injury or death. Such use might also violate state or local
laws.
Rosen Electronics disclaims any liability for
any bodily injury or property damage that might result
from any improper or unintended use.
Copyright © 2015 by Rosen Electronics,LP. All rights reserved. Except as permitted under
the Copyright Act of 1976, no part of this publication may be reproduced or distributed in any
form or by any means, or stored in a database or retrieval system, without the prior written
permission of Rosen Electronics, LP.
ABOUT THE REGISTERED TRADEMARKS
This item incorporates copy protection technology that is protected by U.S. patents and other
intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are
prohibited.
NAVIGATION MAPS
Car navigation maps are frequently updated. While the database was judged to be as
accurate as possible at the time of its release, a map database can never be 100% accurate.
Road information that is maintained in the map databases, such as turn restrictions or road
names may change over time.
Errors or missing information in the map data are not covered by the Product Warranty.
New and/or updates for the map data are the responsibility of the End-user.
NOTE: Features listed in this manual are subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
For complete Owner’s and Navigation Manuals,
please visit
Rosen Electronics online at
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Radio Screen
1. Press
to enter Navigation Mode.
2. Press
right arrow to access Rosen
to select next set of
Menu options.
3. Press
radio presets.
Rosen Menu Options
Navigation: Press to enter Navigation
HDMI Input: Press to access HDMI video
source. For Audio to be heard over factory
speakers. “AUX JACK harness must be
installed” Press “Media” button once to enter
AUX audio.
AUX In: Press to display A/V input when a
source is connected. Press “Media” button
once to enter AUX audio.
Camera: Press to view Rosen Camera input
if installed.
Settings: User selectable options.
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Navigation
Before operating your Rosen Navigation system, please carefully read and
follow the instructions provided in the “Safety Information and Precautions”
located on the inside back cover of this Quick Start Guide.
Start Up
When the navigation software starts, you will see the reminder warning to use your
navigation software safely and lawfully.
You must accept these conditions to continue
Please refer to the User’s Manual for additional information and warning on proper
use of the Rosen Navigation product.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Navigation Menu
On the Navigation view, tap
to open the Navigation menu.
You can see the following menu options when you are navigating without a planned route:
Button
Function
Select your destination by entering an address or its coordinate, or by
selecting a Place, a Saved Location, or a Saved Route. You can also
look up your recent destinations from the History.
Build your route from one or more route points. You can also plan a route
independently of your current GPS position by setting a new starting
point.
Access additional options and check navigation-related information.
Customize the way the navigation software works.
See information about the navigation software.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
With a planned route, the following menu options are also available:
Button
Function
Add an intermediate destination to your route.
See route alternatives to avoid parts of the route, or to avoid a specific
road from your planned route.
View the route in its full length on the map and check route
parameters and route alternatives.Tap
like Simulation or Route Preferences.
to access additional options,
Delete your route.
Delete the next waypoint or the whole route.
In the navigation menu, you have the following additional options:
Button
Function
Open the Saved Locations screen where you can save a location as a
favorite destination or edit a saved location.
Set the Navigation voice volume or mute.
Switch to 2D (
), 2D North up (
) view or back to 3D mode.
Suspend navigation.
Resume navigation.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Access the User profiles menu where you can create new profiles or edit
the existing ones. If several drivers are using the navigation system, they
can create their own profiles with their own settings.
Tap to put navigation to the background.
The following options are also available on many of the menu screens:
Button
Function
The Menu button appears when the Navigation view is displayed. Tap it
to open the Navigation menu.
The More button appears on the screen to display additional features.
Tap it to open the list of additional features on certain screens.
Tap it to return to the map from any menu screen.
Tap the Back button to return to the previous screen. You can also press
and hold this button to quickly return to the Navigation view from any
other screen
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Useful Information Menu
The Useful Information menu provides various additional functions. It can be found in
the Navigation menu. You need an Internet connection via your cell phone to access
online services, like parking and weather information.
Button
Function
Shows information on the current position (latitude, longitude, nearest
town, next crossing street, and so on) or the last known position if GPS
reception is not available.
Offers assistance near your current position.
Offers a list of countries with useful driving information about the
selected country (for example speed limits, maximum blood alcohol
level).
Shows statistical data of your trips, like the start time, end time and
average speed. Track logs, the sequence of the positions given by the
GPS receiver, can be saved together with the trip logs. They can later be
displayed on the map.
Shows a world map with the sunlit and dark areas of the world. Tap
to check the exact sunrise and sunset times for all your route points.
Shows the GPS Information screen with satellite position and signal
strength information.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Sound Settings
You can modify the following settings:
Button
Function
This is the main volume control. Adjust all the sound types below
or mute them.
Adjust the volume of the guidance sounds (verbal instructions) or
mute it.
Adjust the volume of the non-verbal alert sounds (beeps) or mute
it.
Turn off the attention tone preceding verbal instructions or adjust
its volume.
Adjust the volume or mute the sound played when pressing the
button.
You have the following options for each sound type:
Button
Function
Volume
Slider
Adjust the volume of the related sound.
Mute the related sound. The slider becomes inactive. Tap again to
re-enable it.
Button
Function
Disable verbal instructions. This function is enabled by default.
Choose from the following options:
• Announce the street names in the native language area of the
selected voice guidance language.
• Announce the road numbers only.
• Announce the maneuvers only.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Button
Function
Street names sound correct only if you use a native voice profile
for the country. Choose from the following options:
• Try to read the street names in a foreign country.
• Announce the road numbers only.
• Announce the maneuver only.
Set whether you want an immediate announcement for the
next maneuver after each turn, or it is enough to receive the
information when the turn is near.
Set the verbosity of the voice instructions, that is how much they
tell and how often they speak.
• Minimal: the voice instruction is given once right before the next
maneuver.
• Medium: the voice instruction is given when approaching the
next maneuver and it is repeated right before the maneuver.
• Verbose: the voice instruction is given first relatively far from the
next maneuver, it is repeated when approaching the next turn,
and it is repeated again right before the actual maneuver.
Allow reading out a quick summary of the route whenever a route
is calculated.
Allow reading out information about the country you have entered,
when you cross country borders.
Allow reading out real-time traffic messages.
Allow announcing system messages.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Warning Settings
You can enable and modify the following settings:
Button
Function
The System is able to warn you if you exceed the current speed
limit. This information may not be available in your region, or may
not be fully correct for all roads on the map.
The maximum speed set in the vehicle profile is also used for this
warning. The System alerts you if you exceed the pre-set value
even if the legal speed limit is higher.
This setting lets you decide whether you wish to receive visible
and/or audible warnings.
The following warning types are available:
• Visual warning: the current speed limit is shown on the map
when you exceed it.
• Audio and Visual warning: besides the current speed limit being
shown on the map, you also receive a verbal warning when you
exceed the speed limit with the set percentage.
If you prefer to see the speed limit sign on the map all the time
(normally, it is shown only if you exceed the limit), you can set it
here.
You can also set the relative speed above which the appliction
initiates the warning by adjusting a slider. The value can be
different within and outside towns.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Regional Settings
You can modify the following settings:
Button
Function
It displays the current written language of the user interface. Tap it
to select a new language from the list of available languages. The
application restarts after you change this setting and confirm it.
It shows the current voice guidance profile. Tap it to select a new
profile from the list of available languages and speakers.Tap any
of these to hear a sample voice prompt.
Just tap
when you have selected the new spoken language.
Different voice profiles are capable of different levels of service:
• Natural Voice (street names not announced):
These pre-recorded sounds can only tell you basic information
about turns and distances.
• TTS Voice (street names announced): These computed voices
can read out complex instructions, street names or system
messages.
• TTS Voice with a microphone icon: Besides the above
mentioned profiles, it can also be used for voice recognition.
You can set the measurement units and time/date format to be
used. Rosen DB Fit System may not support all the listed units in
some voice guidance languages.
By default, the time zone is taken from the map information and
adjusted by your current location. Here you can manually set the
time zone and the daylight saving time.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Trip Monitor Settings
Trip logs contain useful information about your recorded trips. You can enable
and modify the following settings:
Button
Function
Trip monitor can record statistical data of your trips. If you need
these logs later, you can let the application save them automatically
for you.
Track logs, the sequence of the positions given by the GPS
receiver, can be saved together with trip logs. They can later be
displayed on the map. You can let the application save track logs
whenever it saves a trip.
This is not a button. This line shows the current size of the trip
database, the sum of all trip and track logs saved.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Safety Information and Precautions
WARNING! Please read and follow the following safety precautions.
Failure to follow the instructions below may increase
your risk of collision and personal injury.
The Rosen Navigation software is not a substitute for your personal judgment. The route suggestions should never
supersede any local traffic regulation or your personal judgment and /or knowledge of safe driving practices. Prior
to completing any
maneuvers suggested by your Rosen Navigation software (for example, a U-turn or a left
turn), verify that you can legally and safely complete the maneuver. Do not follow route suggestions if they direct
you to perform an unsafe or illegal maneuver, would place you in an unsafe situation, or would route you into an
area that you consider unsafe.
Do not use the Rosen Navigation software to locate emergency services (such as police, fire stations, hospitals,
and clinics). The database may not include all emergency service providers. Use your own best judgment and ask
for directions in these situations.
If the vehicle is in motion, only a passenger should program the Rosen Navigation software. The driver should not
program the system unless the vehicle is parked in a safe location.
The Rosen Navigation software’s map database provides information on suggested routes without regard to fac-
tors that may affect your driving experience or the time required to arrive at your destination. For example, the sys-
tem does not reflect road detours, closures or construction, some road characteristics (e.g., road surface, slope or
grade, weight or height restrictions, etc.), temporary traffic congestion, weather conditions, and similar factors.
Vehicle Position
The Rosen Navigation software’s computer considers vehicle speed and heading changes, together with longitude
and latitude information, to accurately determine vehicle heading and position on a digital map.
Map and Information Database
The map database used by your Rosen Navigation software was created using high-resolution aerial and land
based data
collection.
Car navigation maps are frequently updated. While the database was judged to be as accurate as possible at the
time of its release, a map database can never be 100% accurate. Road information that is maintained in the map
databases, such as turn restrictions or road names may change over time.
Errors or missing information in the map data are not covered by the Product Warranty. New and/or updates for
the map data are the responsibility of the End-user.
End-User License Agreement
Please refer to the Rosen Navigation User’s Manual to review and accept the terms and conditions in the End-
User License before operating this product.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
DB-GMSERIES5-QSG Rev B
Download from Www.Somanuals.com. All Manuals Search And Download.
All rights reserved. Copyright 2015 Rosen Electronics, LP
|