Roland Musical Instrument RT 10K User Guide
Owner’s Manual  
Thank you, and congratulations on your choice of the Roland RT-10 series.  
201a  
Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and  
“IMPORTANT NOTES” (p. 2; p. 3). These sections provide important information concerning the  
proper operation of the unit. Additionally, in order to feel assured that you have gained a good  
grasp of every feature provided by your new unit, Owner’s manual should be read in its entirety.  
The manual should be saved and kept on hand as a convenient reference.  
/
VERY IMPORTANT!!!  
•
•
Mounting The Drum Trigger Correctly (p. 6)  
Setting Trigger Parameters in a Percussion Sound Module (p. 14)  
202  
Copyright © 2006 ROLAND CORPORATION  
All rights reserved. No part of this publication may be reproduced in any form without the written  
permission of ROLAND CORPORATION.  
*
0
4
2
3
2
1
7
8
-
0
2
*
04232178  
’06-4-2N  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT NOTES  
291a  
In addition to the items listed under “USING THE UNIT SAFELY” on page 2, please read and  
observe the following:  
Placement  
354a  
•
Do not expose the unit to direct sunlight, place it near devices that radiate heat, leave it inside an enclosed vehicle,  
or otherwise subject it to temperature extremes. Excessive heat can deform or discolor the unit.  
Maintenance  
401a  
•
For everyday cleaning wipe the unit with a soft, dry cloth or one that has been slightly dampened with water. To  
remove stubborn dirt, use a cloth impregnated with a mild, non-abrasive detergent. Afterwards, be sure to wipe  
the unit thoroughly with a soft, dry cloth.  
•
402 Never use benzine, thinners, alcohol or solvents of any kind, to avoid the possibility of discoloration and/or  
deformation.  
Additional Precautions  
•
553 Use a reasonable amount of care when using the unit’s buttons, sliders, or other controls; and when using its jacks  
and connectors. Rough handling can lead to malfunctions.  
•
556 When connecting / disconnecting all cables, grasp the connector itself—never pull on the cable. This way you will  
avoid causing shorts, or damage to the cable’s internal elements.  
558b  
•
To avoid disturbing your neighbors, try to keep the unit’s volume at reasonable levels (especially when it is late at  
night).  
988  
•
Security Slot (  
)
http://www.kensington.com/  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before You Start  
Contents of the Package  
•
•
•
•
Drum trigger  
Connection cable  
Owner’s Manual (this manual)  
Two hoop guards (RT-10K only)  
Features  
•
•
•
•
•
•
Works perfectly with Roland V-Drums Modules  
High-Accuracy Sensor for Perfect Triggering  
Dual Trigger for Head & Rim (only RT-10S Snare Trigger)  
Mounts Easily and Quickly on Hoop  
Adjustable-Sensor System for Hoop Height  
Compatible with Various Size of Acoustic Drums  
Parts Descriptions  
fig.RT-10K-e  
RT-10K  
RT-10S / RT-10T  
Rim Sensor  
(RT-10S Only)  
Sensor Bolt  
Sensor Bolt  
Output Jack  
Output Jack  
Head Sensor  
Mounting Screw  
Mounting Screw  
Head Sensor  
*
Do not place excessive pressure on the sensor and do not leave it mounted for extended periods (for example  
when not in use) or with pressure exerted from an angle. Following these instructions will guarantee  
efficient triggering and prevent damage.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before You Start  
Drum Triggers-Definition  
A drum trigger uses a built-in sensor to sense the timing and velocity (force) of how the drum is  
played. Then these trigger signals and transmitted to the sound module.  
Percussion Sound Module  
Vibration  
Trigger Signal  
Audio  
Trigger MIDI Converter  
MIDI  
The RT-10K Kick Trigger and RT-10T tom trigger support head triggering.  
The RT-10S Snare Trigger supports separate head/rim dual triggering.  
Setting Up  
1. Mount the drum trigger (p. 6).  
2. Then connect it to percussion sound module (p. 8).  
3. Set the trigger type and various parameters in the percussion sound module (p. 14).  
4. If needed, fine-tune the trigger parameters while checking the response of the trigger (p. 14).  
Connection Example  
fig.Setting  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Mounting The Drum Trigger  
Important Things To Know  
•
Set up your drums, making sure that any trigger-mounted drum is NOT in contact with another  
drum or stand. Vibrations transmitted from such direct contact can cause unwanted triggering.  
•
•
Make sure the snare drum is secure in its stand.  
Muffling (muting) of the drums can help reduce excess vibrations of the drum trigger, which will  
improve triggering accuracy.  
We recommend using a conventional bass drum mute or blanket pressing against the head. For  
the snare drum, use a ring muffler with the area where the sensor touches the head cut out as  
shown in the diagram below.  
•
•
Correct setting of the percussion sound module’s trigger parameters will ensure the best dynamic  
response.  
Vibrations from other drums being played or drum resonance can cause sounds to be triggered  
accidently. Spacing the drums a bit farther apart, placing them on separate stands, muffling, and/  
or changing the tuning can improve trigger response.  
If after doing any of those suggested procedures you still have problems, re-adjust the trigger  
parameters (p. 14).  
•
Loud sounds from monitor speakers can also cause unwanted triggering. Change the angle of the  
speakers or move them further away from the drum kit. If unwanted triggering continues, re-  
adjust the trigger parameters (p. 14).  
Attaching the Drum Trigger  
RT-10K Kick Trigger  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Mounting The Drum Trigger  
fig.RT-10K-toritsuke  
Hoop Guard  
RT-10K  
1. Attach the included hoop guards (2) to the inner and outer sides of the kick drum hoop.  
•
Attach the hoop guards at one of the positions indicated in the figure.  
We suggest these positions in order to keep the trigger as far away from the snare drum or  
tom toms as possible.  
•
Make sure the hoop guards to not touch any of the tension bolts.  
2. Use a drum key to loosen the RT-10K’s sensor bolt.  
3. Mount the RT-10K on the hoop guards (Step 1), then firmly tighten the mounting screw to secure  
the trigger to the hoop.  
Firmly secure the mounting screw to prevent the drum trigger from falling off.  
RT-10S Snare Trigger/ RT-10T Tom Trigger  
1. Use a drum key to loosen the RT-10S/RT-10T’s sensor bolt.  
2. Mount the RT-10S/RT-10T to the drum hoop, then turn the mounting screw to secure it in place.  
Be sure it does not be touch any tension bolts and position it opposite yourself so that it doesn't  
hinder performance, and so you don't hit it accidently.  
*
Do not insert fingers inside the trigger case and do not touch the board inside. When moving the drum with  
the trigger mounted, only hold the drum itself. Never place excess stress on the trigger itself.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Mounting The Drum Trigger  
Adjusting the Sensor Position (Sensor Bolt)  
Set the sensor bolt so that the sensor compresses approximately 2–3 mm when pressed against the head.  
*
The position of the secured sensor and the amount of this compression play an important role in the  
performance of the trigger.  
*
*
Make sure that the sensor constantly remains in contact with the head, even when playing the drum.  
This setting is very important. If the sensor is compressed too much against the head, it could cause re-  
triggering when the head is played. (meaning more than one sound when you hit the head only once)  
RT-10K  
Remove  
your fingers  
Head  
Press  
RT-10S/RT-10T  
Press  
Remove  
your fingers  
Head  
Connecting a Percussion Sound Module  
Use a stereo cable (included) to connect the drum trigger and the percussion sound module.  
Make sure the cable does not touch the trigger (other than the connection) or the drum itself.  
*
*
When using the RT-10S Snare Trigger, rim shots cannot be played if a monaural cable is used.  
More details regarding percussion sound modules capable of processing RT-10S Snare Trigger rim shots  
can be found here. “Percussion Sound Module Parameter Settings” (p. 14).  
921  
*
To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn  
off the power on all devices before making any connections.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Setting Trigger Parameters in a  
Percussion Sound Module  
Threshold  
Threshold level determines the point at which  
Setting Up Your  
Percussion Sound  
Module  
Correct trigger type and parameter  
settings provide accurate triggering.  
the signal from the drum trigger actually  
triggers a sound. You can look at the chart below  
to understand this.  
Threshold  
A
B
C
We have included an extensive list of percussion  
sound modules with their respective parameter  
settings. Please refer to the charts beginning on  
page 14.  
The curves indicate your playing dynamics. In  
this case, no sound is produced a the “A” or “C”  
points, but only the “B” point.  
If you set the value higher, then soft hits on the  
drum will NOT trigger a sound. Obviously if the  
value is too low, then retriggering will occur  
easily. In this case, you must set the value  
according to your softest playing dynamics, not  
forgetting about possible vibrations from other  
drums in your kit.  
Trigger Parameters  
and How They Function  
Unlike standard electronic drum pads, mesh or  
rubber, acoustic drums need special attention.  
Please read the following to have a better  
understanding of how various parameters can  
help you get the desired results.  
In a live situation, when playing with a band  
and/or using monitor speakers, this parameter  
may need adjusting according to the acoustic  
environment you are in.  
Sensitivity  
The name of this parameter is self-explanatory,  
and should be adjusted to your playing style. To  
adjust this, play at your lowest dynamic and also  
at your strongest dynamic to make sure you get  
the result you want from your sound module.  
Higher sensitivity allows the drum to produce a  
loud volume even when played softly.  
Retrigger Cancel  
Important when you are using drum triggers. Such  
triggers can produce altered waveforms, which  
may also cause inadvertent sounding not only at  
“A” but also at “B” point in the following chart.  
Lower sensitivity will keep the drum producing  
a low volume even when played forcefully.  
A
B
Threshold and Retrigger Cancel  
Time  
Retriggering happens when you hit the drum  
once, but more than one sound comes from your  
sound module. Because an acoustic drum  
vibrates in a different way than an electronic  
drum pad, attention is needed here if you find  
this happening. This can also happen from  
vibrations from nearby drums, or even monitor  
speakers.  
Retrigger Cancel detects disruptions in these  
waveforms and makes it more difficult for  
retriggering to occur.  
While repeatedly striking the drum, raise the  
Retrigger Cancel value until retriggering no  
longer occur. Set this to the lowest value possible  
while still ensuring there is no retriggering.  
Although setting this to a high value prevents  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Setting Trigger Parameters in a Percussion Sound Module  
retriggering, it then becomes easy for sounds to  
be omitted when the drums played fast (roll  
etc.).  
Matching the Drum Trigger to the Sound  
Module  
Trigger types are groupings of various  
trigger parameters adjusted to match  
specific pads and triggers.  
*
Muting the drum can work to suppress  
disruptions in the trigger waveform.  
Roland percussion sound modules feature  
pre-programmed trigger settings for this  
purpose. Adjusting the trigger parameters  
based on these settings will provide the best  
performance from the RT-10 series.  
Crosstalk Cancel/ XTalk Cancel  
Crosstalk is a problem in which the vibrations  
and sounds from a drum when it is struck ends  
up triggering other drums. Crosstalk Cancel is a  
setting that prevents crosstalk that occurs among  
drum triggers connected to the same percussion  
sound module.  
Stable Triggering Dynamics and Speed  
Accuracy  
A drum trigger’s response is affected by  
many variables. These include the type of  
drum, the head and tuning, how it is  
muffled (or muted) and your playing style.  
Correct trigger parameter settings will  
guarantee good dynamic response and  
speed accuracy.  
When a sound being triggered by the snare  
drum, for example, is heard when you play  
another drum, kick or tom-tom, then you should  
raise this value for the snare drum triggered  
sound. If this problem occurs, Crosstalk Cancel  
value should be adjusted first.  
Special Triggering Examples  
Triggering from acoustic drums is not only  
used in a “normal” full, dynamic sense, but  
sometimes triggers are used to trigger loops  
in samplers, or sounds or special effects  
where natural dynamics are not needed.  
In this case, for example, if you hit the tom and  
the snare drum triggers the sound assigned to it,  
you can do the following:  
1. Set the tom and snare to the same Crosstalk  
•
When triggering a loop or special  
effects, it is best to set the “threshold  
level” to a high value.  
Cancel Group. (Only TD-20 and TD-12)  
2. Set the Mount Type for the tom and snare to  
“PAD.” (Only TD-20 and TD-12)  
This way, low velocity hits on the  
drum will not trigger that sound.  
3. Then adjust the Crosstalk Cancel value for  
the snare, by hitting the tom until the snare  
trigger no longer triggers the sound.  
•
When triggering a sound that you  
always want to be at the same level, no  
matter how hard you play, set the  
“Trigger Curve” to “LOUD”  
***** Hint or Tips ICON ******  
*
If the triggers are being affected by sounds from  
other drums without drum triggers or from  
speakers, adjust the “Threshold” (p. 9) value.  
*
Only with attaching the drum trigger to the  
drum, you can use the “Crosstalk Cancel” in the  
percussion sound module to prevent you from  
having crosstalk.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Troubleshooting  
Normally, you should not have any problems if you have read this manual carefully, followed the  
instructions and have carefully taken into consideration the multiple variables regarding using drum  
triggers; type of drum, head, muffling, playing style, acoustic environment etc.  
No Sound is Triggered  
•
•
Check all connections, and make sure the trigger sensor is touching the head as explained on page 8.  
Check the sound module’s trigger indicator to confirm that the percussion sound module is  
receiving the trigger signals.  
Multiple Sounds Played When Drum Is Struck Only Once  
(Retrigger)  
Improve the Drum Setup  
•
•
Move the position of the drum trigger that is reacting to the sound/vibration from another drum.  
It may be necessary to mute or muffle the head in a way that you would not normally do when  
only playing acoustically, or actually change the type of head to the muted head such as the  
®
PinStripe from REMO Inc.  
®
*
PinStripe is a Registered Trademark of Remo Inc., U.S.A.  
•
For Snare Drum triggering, it's a good idea to keep the tension of the snares fairly tight.  
Adjust trigger parameters  
•
Adjust the “Retrigger Cancel” value (p. 9).  
Playing One Drum Causes a Sound Assigned to the Trigger of  
Another Drum to Sound  
Improve the Drum Setup  
•
•
•
Make sure the drums in question are not in physical contact.  
Move the position of the drum trigger that is reacting to the sound/vibration from another drum.  
It may be necessary to mute or muffle the head in a way that you would not normally do when  
only playing acoustically, or actually change the type of head to the muted head such as the  
®
PinStripe from REMO Inc.  
•
•
For Snare Drum triggering, it's a good idea to keep the tension of the snares fairly tight.  
Make sure your drums are securely mounted, especially the snare drum.  
Adjust trigger parameters  
•
If problems occur between drums equipped with drum triggers, adjust the percussion sound  
module’s “Crosstalk Cancel/XTalk Cancel” value (p. 10).  
*
Only with attaching the drum trigger to the drum, you can use the “Crosstalk Cancel” in the  
percussion sound module to prevent you from having crosstalk.  
•
If the triggers are being affected by sounds from other drums without drum triggers or from  
speakers, adjust the “Threshold” (p. 9) value.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Sounds Are Triggered Without Playing the Drums  
•
•
Is the volume too loud of nearby monitor speakers?  
If in a band situation, is the bass amp too close or too loud?  
No Sound When Playing Softly  
•
Adjust the “Threshold” value. (p. 9)  
No Sound From the Rim  
when Playing a Rim Shot or Just the Rim  
Separate triggering from the rim is only possible when using the RT-10S snare trigger.  
•
•
•
Make sure the cable is Stereo.  
Verify that the trigger input you are using is rim-shot capable. (p. 14)  
Verify your trigger parameter settings in the module you are using. (p. 14)  
Same Sound from the Rim and Head  
•
•
This is normal if you are not using the RT-10S snare trigger.  
Dynamic Response Seems Strange  
Adjust the “Sensitivity” value. (p. 9)  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
RT-10K (Kick Trigger)  
RT-10S (Snare Trigger)  
Trigger:  
1 (Head)  
Triggers:  
2 (Head, Rim)  
Connector: Trigger Output Jack (1/4 inch  
Phone Type)  
Connector: Trigger Output Jack (Stereo 1/4  
inch Phone Type)  
Dimensions: approx. 40 (W) x 110 (D) x 70 (H) mm  
approx. 1-5/8 (W) x 4-3/8 (D) x 2-  
13/16 (H) inches  
Dimensions: approx. 40 (W) x 110 (D) x 50 (H) mm  
approx. 1-5/8 (W) x 4-3/8 (D) x 2 (H)  
inches  
Weight:  
90 g  
4 oz  
Weight:  
80 g  
3 oz  
Accessories: Connection Cable, Hoop Guard,  
Owner’s Manual  
Accessories: Connection Cable, Owner’s  
Manual  
Guide for Installation:  
Guide for Installation:  
Rim Height: 11 to 15 mm  
7/16 to 5/8 inch  
Rim Height: 30 to 36 mm  
1-3/16 to 1-7/16 inch  
Rim Thickness (Max.): 13 mm  
9/16 inch  
RT-10T (Tom Trigger)  
fig.RT-10K-rimsize  
Triggers:  
1 (Head)  
Connector: Trigger Output Jack (1/4 inch  
Phone Type)  
Dimensions: approx. 40 (W) x 110 (D) x 50 (H) mm  
approx. 1-5/8 (W) x 4-3/8 (D) x 2 (H)  
inches  
Weight:  
80 g  
3 oz  
Accessories: Connection Cable, Owner’s  
Manual  
Guide for Installation:  
Rim Height: 11 to 15 mm  
7/16 to 5/8 inch  
fig.RT-10S-rimsize1  
30–36  
962a  
*
In the interest of product improvement, the  
specifications and/or appearance of this unit are  
subject to change without prior notice.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Percussion Sound Module Parameter Settings  
Following you will find specific parameter settings for the indicated percussion sound modules.  
These are VERY important. If needed, please refer to the Owner’s Manual of your module.  
*
The trigger parameters should be adjusted as necessary to match the actual state of your configuration, and  
the environment in which it is being used.  
TD-20/TD-12 (Percussion Sound Module)  
RT-10S Snare Trigger Dual Trigger Compatible Inputs  
TD-20:  
TD-12:  
2 (SNARE), 3–6 (TOM1–4), 12–15 (AUX1–4)  
2 (SNARE), 3–5 (TOM1–3), 11–12 (AUX1–2)  
Parameter  
RT-10K  
RT-10S  
RT-10T  
Kick Trigger  
Snare Trigger  
Tom Trigger  
Trig Type  
RT7K  
8
RT5S  
10  
RT3T  
10  
TRIGGER  
BASIC  
Sensitivity  
Threshold  
16  
11  
16  
Curve  
LINEAR  
30  
LINEAR  
30  
LINEAR  
30  
TRIGGER  
XTALK  
CANCEL  
Xtalk Cancel  
Mount Type  
Xtalk Group  
Scan Time (ms)  
Retrig Cancel  
Mask Time (ms)  
Rim Gain  
PAD  
1
PAD  
1
PAD  
1
TRIGGER  
ADVANCED  
3.5  
2.0  
2.0  
13  
11  
13  
12  
10  
10  
-----  
-----  
-----  
1.0  
-----  
-----  
-----  
RimShot Adjust  
XStick Thrshld  
3.0  
90  
TD-6V (Percussion Sound Module)  
RT-10S Snare Trigger Dual Trigger Compatible Inputs  
2 (SNARE)  
Parameter  
RT-10K  
RT-10S  
RT-10T  
Kick Trigger  
Snare Trigger  
Tom Trigger  
TRIG  
BASIC  
TrigTyp  
RT-7K  
10  
RT-5S  
RT-3T  
10  
Sensitivity  
Threshold  
TrigCurve  
Xtalk Cancel  
Scan Time  
Retrig Cancel  
Mask Time  
Rim Sens  
10  
6
6
8
LINEAR  
30  
LINEAR  
LINEAR  
30  
30  
TRIG  
ADVNCD  
2.0ms  
6
2.0ms  
4
2.0ms  
5
24ms  
-----  
12ms  
7
12ms  
-----  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Percussion Sound Module Parameter Settings  
TD-3 (Percussion Sound Module)  
RT-10S Snare Trigger Dual Trigger Compatible Inputs  
SNARE  
Parameter  
RT-10K  
RT-10S  
RT-10T  
Kick Trigger  
Snare Trigger  
Tom Trigger  
Trig Type  
Sensitivity  
Threshold  
Curve  
tYP  
SnS  
thr  
t7K  
9
t5S  
10  
10  
Lnr  
2.5  
4
t3t  
10  
10  
12  
Cur  
Scn  
Lnr  
2.5  
8
Lnr  
2.5  
5
Scan Time  
Retrig Cancel  
Crosstalk  
Mask Time  
Rim Sens  
Rim Gain  
rtG  
CrS  
MSK  
rMS  
rMG  
50  
50  
12  
11  
1.0  
50  
12  
12  
-----  
-----  
-----  
-----  
TMC-6 (Trigger MIDI Converter)  
RT-10S Snare Trigger Dual Trigger Compatible Inputs  
2 (SNARE)  
Parameter  
RT-10K  
RT-10S  
RT-10T  
Kick Trigger  
Snare Trigger  
Tom Trigger  
VELOCITY CURVE  
THRESHOLD  
SENSITIVITY  
TRIG TYPE  
Lnr  
8
Lnr  
7
Lnr  
7
10  
10  
10  
KiK  
3.0  
10  
Snr (*)  
2.5  
8
toM  
2.5  
10  
SCAN TIME  
RETRIG CANCEL  
MASK TIME  
40  
12  
12  
XTALK CANCEL  
30  
30  
30  
(*) When you connect the RT-10S to the trigger input 2 (SNARE), make the settings as shown below.  
2 HEAD: “Snr”  
2 RIM:  
“riM”  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Percussion Sound Module Parameter Settings  
SPD-20 (Total Percussion Pad)  
RT-10S Snare Trigger Dual Trigger Compatible Inputs  
1, 2  
Parameter  
RT-10K  
RT-10S  
RT-10T  
Kick Trigger  
Snare Trigger  
Tom Trigger  
TRIG SENS  
10  
8
10  
7
10  
7
TRIG THRESHOLD  
TRIG TYPE  
KiK  
0
120  
0
toM  
0
TRIG CURVE  
Advanced  
Trigger  
Parameter  
Scan Time  
Scn  
rEt  
10  
7
10  
6
10  
6
Retrigger Cancel  
Mask Time  
MSK  
CrS  
riM  
28  
40  
-----  
12  
40  
9
12  
40  
-----  
Crosstalk Cancel  
Rim Sensitivity  
SPD-S (Sampling Pad)  
RT-10S Snare Trigger Dual Trigger Compatible Inputs  
TRIG IN  
Parameter  
RT-10K  
RT-10S  
RT-10T  
Kick Trigger  
Snare Trigger  
Tom Trigger  
Input Mode  
Type  
TRGx2  
RT-7K  
9
HD&RM  
TRGx2  
RT-3T  
10  
RT-5S  
Sensitivity  
Threshold  
VeloCrv  
10  
10  
10  
10  
LINEAR  
2.5  
LINEAR  
LINEAR  
3.0  
Scan Time  
RetrigCancel  
Mask Time  
XtalkCancel  
Rim Sens  
Rim Gain  
2.5  
6
6
6
12  
12  
30  
11  
1.0  
12  
30  
30  
-----  
-----  
-----  
-----  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Information  
When you need repair service, call your nearest Roland Service Center or authorized Roland  
distributor in your country as shown below.  
SINGAPORE  
COSTA RICA  
TRINIDAD  
NORWAY  
JORDAN  
AFRICA  
EGYPT  
SWEE LEE MUSIC  
JUAN Bansbach Instrumentos  
AMR Ltd  
Roland Scandinavia Avd.  
MUSIC HOUSE CO. LTD.  
Ground Floor  
COMPANY PTE. LTD.  
150 Sims Drive,  
SINGAPORE 387381  
TEL: 6846-3676  
Musicales  
Kontor Norge  
FREDDY FOR MUSIC  
P. O. Box 922846  
Amman 11192 JORDAN  
TEL: (06) 5692696  
Maritime Plaza  
Barataria Trinidad W.I.  
TEL: (868) 638 6385  
Ave.1. Calle 11, Apartado 10237,  
San Jose, COSTA RICA  
TEL: 258-0211  
Lilleakerveien 2 Postboks 95  
Lilleaker N-0216 Oslo  
NORWAY  
Al Fanny Trading Office  
9, EBN Hagar A1 Askalany  
Street,  
TEL: 2273 0074  
ARD E1 Golf, Heliopolis,  
Cairo 11341, EGYPT  
TEL: 20-2-417-1828  
URUGUAY  
Todo Musica S.A.  
Francisco Acuna de Figueroa  
1771  
C.P.: 11.800  
Montevideo, URUGUAY  
TEL: (02) 924-2335  
SRI LANKA  
Penguin Electronics (Pvt) Ltd.  
115, Maya Avenue,  
Colombo 06, SRI LANKA  
TEL: (11) 2552376  
CURACAO  
Zeelandia Music Center Inc.  
Orionweg 30  
Curacao, Netherland Antilles  
TEL:(305)5926866  
KUWAIT  
EASA HUSAIN AL-YOUSIFI  
& SONS CO.  
Abdullah Salem Street,  
Safat, KUWAIT  
TEL: 243-6399  
POLAND  
MX MUSIC SP.Z.O.O.  
UL. Gibraltarska 4.  
PL-03664 Warszawa POLAND  
TEL: (022) 679 44 19  
REUNION  
Maison FO - YAM Marcel  
25 Rue Jules Hermann,  
Chaudron - BP79 97 491  
Ste Clotilde Cedex,  
TAIWAN  
ROLAND TAIWAN  
ENTERPRISE CO., LTD.  
Room 5, 9fl. No. 112 Chung  
Shan N.Road Sec.2, Taipei,  
TAIWAN, R.O.C.  
DOMINICAN REPUBLIC  
Instrumentos Fernando Giraldez  
Calle Proyecto Central No.3  
Ens.La Esperilla  
Santo Domingo,  
Dominican Republic  
TEL:(809) 683 0305  
PORTUGAL  
Roland Iberia, S.L.  
Portugal Office  
Cais das Pedras, 8/9-1 Dto  
4050-465, Porto, PORTUGAL  
TEL: 22 608 00 60  
LEBANON  
Chahine S.A.L.  
Gerge Zeidan St., Chahine  
Bldg., Achrafieh, P.O.Box: 16-  
5857  
Beirut, LEBANON  
TEL: (01) 20-1441  
VENEZUELA  
Instrumentos Musicales  
Allegro,C.A.  
Av.las industrias edf.Guitar  
REUNION ISLAND  
TEL: (0262) 218-429  
SOUTH AFRICA  
T.O.M.S. Sound & Music  
(Pty)Ltd.  
11 Melle St., Braamfontein,  
import  
TEL: (02) 2561 3339  
#7 zona Industrial de Turumo  
Caracas, Venezuela  
TEL: (212) 244-1122  
ECUADOR  
Mas Musika  
Rumichaca 822 y Zaruma  
Guayaquil - Ecuador  
ROMANIA  
FBS LINES  
Piata Libertatii 1,  
535500 Gheorgheni,  
ROMANIA  
THAILAND  
OMAN  
Theera Music Co. , Ltd.  
330 Soi Verng NakornKasem,  
New Road, Sumpantawongse,  
Bangkok 10100, THAILAND  
TEL: (02) 224-8821  
Johannesbourg,  
TALENTZ CENTRE L.L.C.  
Malatan House No.1  
Al Noor Street, Ruwi  
SULTANATE OF OMAN  
TEL: 2478 3443  
SOUTH AFRICA  
TEL: (011) 403 4105  
FAX: (011) 403 1234  
TEL:(593-4)2302364  
EUROPE  
TEL: (266) 364 609  
EL SALVADOR  
OMNI MUSIC  
75 Avenida Norte y Final  
Alameda Juan Pablo II,  
Edificio No.4010 San Salvador,  
EL SALVADOR  
AUSTRIA  
Roland Elektronische  
Musikinstrumente HmbH.  
Paul Bothner(PTY)Ltd.  
Royal Cape Park, Unit 24  
Londonderry Road, Ottery 7800  
Cape Town, SOUTH AFRICA  
TEL: (021) 799 4900  
RUSSIA  
MuTek  
Dorozhnaya ul.3,korp.6  
117 545 Moscow, RUSSIA  
TEL: (095) 981-4967  
VIETNAM  
SAIGON MUSIC  
DISTRIBUTOR  
(TAN DINH MUSIC)  
138 Tran Quang Khai Street  
Dist. 1, Ho Chi Minh City  
VIETNAM  
QATAR  
Al Emadi Co. (Badie Studio &  
Stores)  
P.O. Box 62, Doha, QATAR  
Austrian Office  
Eduard-Bodem-Gasse 8,  
A-6020 Innsbruck, AUSTRIA  
TEL: (0512) 26 44 260  
TEL: 262-0788  
TEL: 4423-554  
SPAIN  
Roland Iberia, S.L.  
Paseo García Faria, 33-35  
08005 Barcelona SPAIN  
TEL: 93 493 91 00  
GUATEMALA  
SAUDI ARABIA  
aDawliah Universal  
Electronics APL  
Corniche Road, Aldossary  
Bldg., 1st Floor, Alkhobar,  
SAUDI ARABIA  
ASIA  
TEL: (08) 848-4068  
BELGIUM/FRANCE/  
HOLLAND/  
LUXEMBOURG  
Roland Central Europe N.V.  
Houtstraat 3, B-2260, Oevel  
(Westerlo) BELGIUM  
Casa Instrumental  
Calzada Roosevelt 34-01,zona 11  
Ciudad de Guatemala  
Guatemala  
CHINA  
Roland Shanghai Electronics  
Co.,Ltd.  
5F. No.1500 Pingliang Road  
Shanghai 200090, CHINA  
TEL: (021) 5580-0800  
AUSTRALIA/  
NEW ZEALAND  
SWEDEN  
Roland Scandinavia A/S  
SWEDISH SALES OFFICE  
Danvik Center 28, 2 tr.  
S-131 30 Nacka SWEDEN  
TEL: (0)8 702 00 20  
TEL:(502) 599-2888  
HONDURAS  
Almacen Pajaro Azul S.A. de C.V.  
BO.Paz Barahona  
3 Ave.11 Calle S.O  
San Pedro Sula, Honduras  
TEL: (504) 553-2029  
P.O.Box 2154, Alkhobar 31952  
SAUDI ARABIA  
TEL: (03) 898 2081  
TEL: (014) 575811  
AUSTRALIA/  
CZECH REP.  
K-AUDIO  
Kardasovska 626.  
CZ-198 00 Praha 9,  
CZECH REP.  
NEW ZEALAND  
Roland Corporation  
Australia Pty.,Ltd.  
38 Campbell Avenue  
Dee Why West. NSW 2099  
AUSTRALIA  
Roland Shanghai Electronics  
Co.,Ltd.  
(BEIJING OFFICE)  
10F. No.18 3 Section Anhuaxili  
Chaoyang District Beijing  
100011 CHINA  
SYRIA  
Technical Light & Sound  
Center  
Rawda, Abdul Qader Jazairi St.  
Bldg. No. 21, P.O.BOX 13520,  
Damascus, SYRIA  
SWITZERLAND  
Roland (Switzerland) AG  
Landstrasse 5, Postfach,  
CH-4452 Itingen,  
SWITZERLAND  
TEL: (061) 927-8383  
MARTINIQUE  
Musique & Son  
Z.I.Les Mangle  
97232 Le Lamantin  
Martinique F.W.I.  
TEL: 596 596 426860  
TEL: (2) 666 10529  
TEL: (010) 6426-5050  
DENMARK  
For Australia  
Roland Scandinavia A/S  
Nordhavnsvej 7, Postbox 880,  
DK-2100 Copenhagen  
DENMARK  
TEL: (011) 223-5384  
HONG KONG  
Tom Lee Music Co., Ltd.  
Service Division  
22-32 Pun Shan Street, Tsuen  
Wan, New Territories,  
HONG KONG  
Tel: (02) 9982 8266  
For New Zealand  
Tel: (09) 3098 715  
UKRAINE  
TIC-TAC  
Mira Str. 19/108  
P.O. Box 180  
295400 Munkachevo,  
UKRAINE  
TEL: (03131) 414-40  
TURKEY  
ZUHAL DIS TICARET A.S.  
Galip Dede Cad. No.37  
Beyoglu - Istanbul / TURKEY  
TEL: (0212) 249 85 10  
Gigamusic SARL  
10 Rte De La Folie  
97200 Fort De France  
Martinique F.W.I.  
TEL: 596 596 715222  
TEL: 3916 6200  
FINLAND  
Roland Scandinavia As, Filial  
Finland  
Elannontie 5  
FIN-01510 Vantaa, FINLAND  
TEL: (0)9 68 24 020  
CENTRAL/LATIN  
AMERICA  
TEL: 2415 0911  
U.A.E.  
Zak Electronics & Musical  
Instruments Co. L.L.C.  
Zabeel Road, Al Sherooq Bldg.,  
No. 14, Grand Floor, Dubai,  
U.A.E.  
Parsons Music Ltd.  
UNITED KINGDOM  
8th Floor, Railway Plaza, 39  
Chatham Road South, T.S.T,  
Kowloon, HONG KONG  
TEL: 2333 1863  
MEXICO  
ARGENTINA  
Instrumentos Musicales S.A.  
Av.Santa Fe 2055  
(1123) Buenos Aires  
ARGENTINA  
TEL: (011) 4508-2700  
Roland (U.K.) Ltd.  
Atlantic Close, Swansea  
Enterprise Park, SWANSEA  
SA7 9FJ,  
Casa Veerkamp, s.a. de c.v.  
Av. Toluca No. 323, Col. Olivar  
de los Padres 01780 Mexico  
D.F. MEXICO  
GERMANY  
Roland Elektronische  
Musikinstrumente HmbH.  
Oststrasse 96, 22844  
Norderstedt, GERMANY  
TEL: (040) 52 60090  
TEL: (04) 3360715  
INDIA  
Rivera Digitec (India) Pvt. Ltd.  
409, Nirman Kendra  
Mahalaxmi Flats Compound  
Off. Dr. Edwin Moses Road,  
Mumbai-400011, INDIA  
TEL: (022) 2493 9051  
UNITED KINGDOM  
TEL: (01792) 702701  
TEL: (55) 5668-6699  
NICARAGUA  
Bansbach Instrumentos  
Musicales Nicaragua  
Altamira D'Este Calle Principal  
de la Farmacia 5ta.Avenida  
1 Cuadra al Lago.#503  
Managua, Nicaragua  
BARBADOS  
A&B Music Supplies LTD  
12 Webster Industrial Park  
Wildey, St.Michael, Barbados  
TEL: (246)430-1100  
NORTH AMERICA  
MIDDLE EAST  
BAHRAIN  
GREECE/CYPRUS  
STOLLAS S.A.  
Music Sound Light  
155, New National Road  
Patras 26442, GREECE  
TEL: 2610 435400  
CANADA  
Roland Canada Ltd.  
(Head Office)  
5480 Parkwood Way  
Richmond B. C., V6V 2M4  
CANADA  
INDONESIA  
PT Citra IntiRama  
J1. Cideng Timur No. 15J-150  
Jakarta Pusat  
INDONESIA  
TEL: (021) 6324170  
BRAZIL  
Roland Brasil Ltda.  
Rua San Jose, 780 Sala B  
Parque Industrial San Jose  
Cotia - Sao Paulo - SP, BRAZIL  
TEL: (011) 4615 5666  
Moon Stores  
No.16, Bab Al Bahrain Avenue,  
P.O.Box 247, Manama 304,  
State of BAHRAIN  
TEL: (505)277-2557  
PANAMA  
TEL: (604) 270 6626  
SUPRO MUNDIAL, S.A.  
Boulevard Andrews, Albrook,  
Panama City, REP. DE  
PANAMA  
TEL: 17 211 005  
HUNGARY  
Roland East Europe Ltd.  
Warehouse Area ‘DEPO’ Pf.83  
H-2046 Torokbalint,  
HUNGARY  
IRAN  
MOCO INC.  
No.41 Nike St., Dr.Shariyati Ave.,  
Roberoye Cerahe Mirdamad  
Tehran, IRAN  
Roland Canada Ltd.  
(Toronto Office)  
170 Admiral Boulevard  
Mississauga On L5T 2N6  
CANADA  
KOREA  
CHILE  
Comercial Fancy II S.A.  
Rut.: 96.919.420-1  
Nataniel Cox #739, 4th Floor  
Santiago - Centro, CHILE  
TEL: (02) 688-9540  
Cosmos Corporation  
1461-9, Seocho-Dong,  
Seocho Ku, Seoul, KOREA  
TEL: (02) 3486-8855  
TEL: 315-0101  
TEL: (23) 511011  
PARAGUAY  
Distribuidora De  
Instrumentos Musicales  
J.E. Olear y ESQ. Manduvira  
Asuncion PARAGUAY  
TEL: (595) 21 492147  
TEL: (021) 285-4169  
TEL: (905) 362 9707  
IRELAND  
Roland Ireland  
G2 Calmount Park, Calmount  
Avenue, Dublin 12  
Republic of IRELAND  
TEL: (01) 4294444  
MALAYSIA  
ISRAEL  
Halilit P. Greenspoon & Sons  
Ltd.  
8 Retzif Ha'aliya Hashnya St.  
Tel-Aviv-Yafo ISRAEL  
TEL: (03) 6823666  
U. S. A.  
Roland Asia Pacific Sdn. Bhd.  
45-1, Block C2, Jalan PJU 1/39,  
Dataran Prima, 47301 Petaling  
Jaya, Selangor, MALAYSIA  
TEL: (03) 7805-3263  
COLOMBIA  
Centro Musical Ltda.  
Cra 43 B No 25 A 41 Bododega 9  
Medellin, Colombia  
Roland Corporation U.S.  
5100 S. Eastern Avenue  
Los Angeles, CA 90040-2938,  
U. S. A.  
PERU  
Audionet  
Distribuciones Musicales SAC  
Juan Fanning 530  
Miraflores  
TEL: (323) 890 3700  
TEL: (574)3812529  
ITALY  
Roland Italy S. p. A.  
Viale delle Industrie 8,  
20020 Arese, Milano, ITALY  
TEL: (02) 937-78300  
PHILIPPINES  
G.A. Yupangco & Co. Inc.  
339 Gil J. Puyat Avenue  
Makati, Metro Manila 1200,  
PHILIPPINES  
Lima - Peru  
TEL: (511) 4461388  
TEL: (02) 899 9801  
As of April 1, 2006 (ROLAND)  
Download from Www.Somanuals.com. All Manuals Search And Download.  

QSC Audio Speaker Cinema Low Frequency Loudspeaker User Guide
Regal Ware Kitchen Utensil K6740 User Guide
Renesas Computer Hardware R8C 1B User Guide
Rolls Pager PA66 User Guide
Ryobi Chainsaw PNC3840 RY74005d, PCN4545 RY74007D User Guide
Samsung Home Theater System HT UP30 User Guide
Samsung Telephone SCH i700 Series User Guide
Sanyo Battery Charger RC 2400 User Guide
Sears Exercise Bike 831287602 User Guide
Seiko Group Automobile Accessories DH33 User Guide