DAB / FM RDS Digital Radio with Alarm, Sleep and Nap Timer
Please read this manual before use
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
(Top)
2
3
4
5
6
7
8
9
10 11
12
1
17 16
15
14
13
1. Volume control
2. Treble control
3. Dimmer button
4. LCD display
7. DAB / FM / AUX button
8. Menu button
9. Select button
10. Tuning Up button
11. On / Off button
13. Tuning Down button
14. Station preset buttons
15. 5 + button
16. Bass control
17. Low battery indicator
5. Info button
6. Auto Tune button
12. Tuning / Select control
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
2
020 8758 0338 (Mon-Fri)
Controls
(Rear View)
18
19
18. Telescopic aerial
19. DC in socket
20. Battery compartment
21. Headphone socket
22. Auxiliary input socket
23. USB socket (for service use only)
23 22 21 20
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Navigation
This page describes the basic means of controlling your Ecologic 7.
Instructions for each operating mode are given in the later sections of
this book.
1
1. Pressing the On/Off button brings your radio out of Stand-by mode if
running from the mains or switches it on if using batteries.
Pressing the On/Off button while the radio is in use will cause it to
return to Stand-by mode with the clock display when running from the
mains, or will switch if off when running on batteries.
2. PressingtheDAB/FM/AUXbuttongivesyouaccesstoeachoperating
2
mode in turn: DAB, FM and Auxiliary input.
3. Press and release the Menu button to access the menu system for
each mode.
4. Pressing the Menu button once or twice as needed will access the
Main radio menu allowing access to DAB, FM, Auxiliary input mode,
Utility and Setup modes.
3-5
5. If an error is made when navigating the menus it is generally possible
to get back to a higher level menu by pressing and releasing the Menu
button.
6. Many operations require the user to make a selection from the menu.
ThisisdoneusingeithertheTuning/SelectcontrolorTuningUp/Down
buttons. Turn the control clockwise or anti-clockwise to highlight the
desired menu item then press the control to select that item.
6
6
Alternatively press the Tuning Up or Down buttons to highlight the
desired menu item then press the Select button to select that item.
6
6
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
4
020 8758 0338 (Mon-Fri)
Battery operation
1. Remove the Battery cover on the rear of the unit by pushing the
battery door in and downwards.
2. Insert six LR20 (D size) batteries into the spaces in the compartment.
Takecaretoensureallbatteriesareinsertedwiththecorrectpolarityas
shown next to the battery compartment. Replace the battery cover.
3. The low battery indicator lighting, reduced power, a stuttering sound,
distortion or the radio switching itself off are all signs that the batteries
may need replacing.
4. If the radio is not to be used for any extended period of time it is
recommended that the batteries are removed from the radio.
We would recommend for economy that the ecologic 7 is used via the
AC adaptor whenever possible with battery operation for occasional
use only. Inserting the adaptor plug into the DC input socket will
disconnect the batteries.
1
If using batteries, only alkaline types should normally be used. Battery life
will vary according to the use of the radio, but up to 150 hours should be
possible depending upon mode, volume, dimmer and tone settings.
Rechargeable Nickel Metal Hydride (NiMH) cells can be used in the radio
but must be charged outside the radio using an external charger. Note that
commercially available D size NiMH cells have a capacity which is only
a small fraction of that of D size Alkaline cells and so they will power the
radio for only a few hours before needing recharging. Never mix batteries
of different types, capacities or brands in the radio.
IMPORTANT: The batteries should not be exposed to excessive heat
such as sunshine, fire or the like. After use, disposable batteries should
if possible be taken to a suitable recycling centre. On no account should
batteries be disposed of by incineration.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Using the radio for the first time
1. Place your radio on a flat surface.
2. Fully extend the telescopic aerial. The aerial should be fully extended
and positioned vertically for optimum reception.
3. Plug the cable from the mains adaptor into the DC input socket on
the rear of your radio (marked 'DC In') ensuring that the plug is pushed
fully into the socket. Plug the mains adaptor into a wall socket and
switch on the socket. The display will show "ROBERTS RADIO" for a
fewsecondsandthenthedisplaywillthenshow"SETCLOCK".During
this time the radio is scanning to find out which DAB radio stations are
available. When stations have been found the current time and date
will appear on the display.
Note that the display will not show any scanning message for this first
scan.
4. If no stations are found the display will show the default time and
date. It may be necessary to relocate your radio to a position giving
better reception. You should then carry out a scan to find stations as
described on page 12.
IMPORTANT: The mains adaptor is used as the means of connecting
the radio to the mains supply. The mains socket used for the radio must
remain accessible during normal use. In order to disconnect the radio
from the mains, the mains adaptor should be removed from the mains
socket outlet completely.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
6
020 8758 0338 (Mon-Fri)
Operating your radio - DAB
1. Press the On/Off button to switch on your radio. The display will show
"Now tuning" for a few seconds.
When first switched on, the radio will be in DAB mode. After each use
the radio will remember the mode used and then switch on in that
mode the next time it is used.
1
2. If the radio has been used before, the last used station will be
selected.
3. If this is the first time that the radio has been used, then the first station
in the list of stations found during scanning will be played. The display
will show the station name.
4. If no signals are found then "Station not available" will be displayed
and it may be necessary to relocate your radio to a position giving
better reception. You should then carry out a scan to find stations as
described on page 12.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Selecting a station - DAB
1. Press the On/Off button to switch on your radio.
1
2
2. Press the DAB/FM/AUX button to select DAB mode. The display will
show "Now tuning" for a few seconds followed by the name of the
radio station.
3. Rotate the Tuning/Select control to scroll through the list of available
stations.
4. When the station name appears on the display, press and release
the Tuning/Select control to select the station. The display will show
"Now tuning" while your radio finds the new station.
5. Adjust the Volume and Tone controls to the required settings.
Note:Ifafterselectingastationthedisplayshows"Stationnotavailable"
it may be necessary to relocate your radio to a position giving better
reception.
3,4
5
5
5
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
8
020 8758 0338 (Mon-Fri)
Secondary services - DAB
1. Certainradiostationshaveoneormoresecondaryservicesassociated
with them. If a station has a secondary service associated with it the
display will show ">>" next to the station name on the station list. The
secondary service will then appear immediately after the primary
service as you rotate the Tuning/Select control.
1,2
2. Totunetothesecondaryservice,pressandreleasetheTuning/Select
control. Most secondary services do not broadcast continually and
if the selected service is not available, the radio will retune to the
associated primary service.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Display modes - DAB
Your radio has a range of display options when in DAB mode:-
1. Press and release the Info button to cycle through the various
options.
a. Scrolling text
b. Program Type
c. Multiplex Name
d. Frequency
Displays scrolling text messages such as
artist/track name, phone in number etc.
a
b
c
d
1
Displays the type of station being listened
to e.g. Pop, Classic, News etc.
Displays the name of DAB multiplex to
which the current station belongs.
Displays the frequency for the currently
tuned DAB station.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
10
020 8758 0338 (Mon-Fri)
Display modes - DAB cont.
e. Bit rate & audio type
Displays the digital bit rate & audio type
for the current DAB radio station.
e
f. Signal strength
Displaysthesignalstrengthforthestation
being listend to. The clear rectangle
shows the minimum required signal
strength for clear DAB reception.
f
g
h
g. Time
Displays the current time.
Displays the current date.
h. Date
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Finding new stations - DAB
As time passes new stations may become available. To find new stations
proceed as follows:-
1
1. With the unit in DAB mode (see page 8) press and release the Auto
Tune button, the display will show "Scanning". Your radio will perform
a scan of the Band III DAB channels. As new stations are found the
station counter on the right-hand side of the display will increase and
stations will be added to the list.
Manual Tuning - DAB
Manual tuning allows you to tune directly to the various Band III DAB
channels. UK DAB stations are currently located in the range 11B to
12D.
1
1. Press and release the Menu button so that the display shows "Manual
tune". Press and release the Tuning/Select control.
2. Rotate the Tuning/Select control to select the required DAB
channel.
3. Press and release the Tuning/Select control. The open block in the
signal strength graph shows you the minimum signal strength needed
forgoodDABreception.Thesignalblockswillgoupanddownshowing
the changing signal strength as you adjust the telescopic aerial or
the radio position. Any new radio stations found on the tuned DAB
multiplex will be added to the list stored in the radio.
1-4
4. PressandreleasetheTuning/Selectcontroltoreturntonormaltuning
mode.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
12
020 8758 0338 (Mon-Fri)
Dynamic Range Control (DRC) settings - DAB
DRC can make quieter sounds easier to hear when your radio is used in
a noisy environment. This function is only for the DAB waveband.
2
1. Press the On/Off button to switch on your radio.
2. Press and release the Menu button so that "Manual tune" appears on
the display.
3. Rotate the Tuning/Select control until the display shows "DRC
value". Press and release the Tuning/Select control to enter the DRC
adjustment mode.
3-5
4. Rotate the Tuning/Select control to select the required DRC setting
(default is 0).
DRC 0 DRC is switched off, Broadcast DRC will be ignored.
DRC 1/2 DRC level is set to 1/2 that sent by broadcaster.
DRC 1 DRC is set as sent by broadcaster.
5. Press and release the Tuning/Select control to confirm the setting.
The display will return to normal tuning mode.
Note: Not all DAB broadcasts are able to use the DRC function. If the
broadcast does not support DRC, then the DRC setting in the radio will
have no effect.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Operating your radio - FM auto tune
1. CarefullyextendthetelescopicaerialfullyandpresstheOn/Off button
to switch on your radio.
1,9
2
2. Press and release the DAB/FM/AUX button to select the FM band.
3. Press and release the Auto Tune button to cause your radio to scan
in the direction previously scanned and stop automatically when it
finds a station of sufficient strength.
3,5,6
4. After a few seconds the display will update. The display will show the
frequency of the signal found. If the signal is strong enough and there
is RDS data present then the radio will display the station name.
5. To find additional stations press and release the Auto Tune button
as before.
6
8
6. To scan the FM band in a opposite direction either rotate the Tuning/
SelectcontrolclockwiseoruseTuningUpbutton(toscanlowfrequency
to high frequency) or rotate anti-clockwise or useTuning Down button
(to scan high frequency to low frequency) and then press the Auto
Tune button again.
7. When the end of the waveband is reached your radio will recommence
tuning from the opposite end of the waveband.
8
8
8. Adjust the Volume and Tone controls to the required settings.
If you find that an FM broadcast has a lot of background hiss, this may
often be reduced by setting the radio into Mono reception mode for the
current FM station. Please refer to the section "Stereo / Mono setting - FM"
on page 17 for further details.
9. To switch off your radio press the On/Off button.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Manual tuning - FM
1. Fully extend the Telescopic aerial and press the On/Off button to
switch on your radio.
1,6
2
2. Press and release the DAB/FM/AUX button to select the FM band.
3. Rotate the Tuning/Select control or press the Tuning Up or Down
buttons to tune to a station. The frequency will change in steps of
50kHz.
4. When the end of the waveband is reached the radio will recommence
tuning from the opposite end of the waveband.
5. Set the Volume and Tone controls to the desired settings.
6. To switch off your radio press the On/Off button.
If you find that an FM broadcast has a lot of background hiss, this may
often be reduced by setting the radio into Mono reception mode for the
current FM station. Please refer to the section "Stereo / Mono setting - FM"
on page 17 for further details.
3
5
5
5
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Display modes - FM
Your radio has a range of display options for FM mode:-
The Radio Data System (RDS) is a system in which inaudible digital
information is transmitted in addition to the normal FM radio programme.
RDS offers several useful features. The following are available on your
radio.
1. Press and release the Info button to cycle through the various
modes.
a
b
c
d
e
1
a. Scrolling text
b. Program Type
c. Time
Displays scrolling text messages such as
artist/track name, phone in number etc.
Displays type of station being listened to
e.g. Pop, Classic, News etc.
Displays the current time.
(24 hour clock format)
d. Date
Displays the current date.
e. Frequency
Displays frequency of the fm signal
Note: If no RDS information is available, the radio will be unable to display
the station name, scrolling text and programme type information.
If you need any further advice, please call our Technical Helpline on :-
16
Download from Www.Somanuals.com. All Manuals Search And Download.
020 8758 0338 (Mon-Fri)
Stereo / Mono setting - FM
Your radio will play stereo FM broadcasts in stereo provided that the
received signal is of adequate strength. However, as a stereo signal
becomes weaker the audio signal will become poorer. It may be preferable
to force the radio to play the station in mono in order to reduce the level
of background hiss.
1. Press the On/Off button to switch on your radio.
1
2. Tune to the required FM radio station as previously described (see
pages 14, 15).
3. Press the Menu button and rotate the Tuning/Select control until
"Mono" shows on the display. Press the Tuning/Select control to
cause the radio station to play the current station in mono.
3,4
TheMonooverrideisatemporarysettingandisappliedtothecurrently
tuned station only. It is cancelled automatically by tuning to another
station.
4. If you wish to cancel the Mono override while listening to the currently
tuned radio station, press the Menu button and rotate Tuning/Select
control until "Auto" shows on the display. Press the Tuning/Select
control to cause the radio to play the current station in stereo if the
signal is sufficiently strong.
3,4
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Presetting stations - DAB and FM
You may store your preferred DAB and FM radio stations to the preset
station memories. There are 20 memory presets in your radio 10 for DAB
and 10 for FM. Presets are remembered by your radio in the event of a
power failure.
1
2
The procedure for setting presets and using them to tune stations is the
same for FM and DAB modes, and is described below.
1. Press the On/Off button to switch on the radio.
2. Press the DAB/FM/AUX button to select the DAB or FM waveband.
3. Tune to the required station as previously described.
4
4. Press and hold down the required Preset button until the display
shows, for example "Preset 01 Saved". The currently tuned station
will be stored under the chosen preset button. Repeat this procedure
for the remaining presets.
5
5. Presets6to10areobtainedbypressingandholding5+buttontogether
with the Preset button 1 to 5. e.g preset 7 can be set by pressing
and holding 5+ button together with Preset button 2 until the display
shows "Preset 07 Saved".
5
6. Stations stored in preset memories may be overwritten by following
the above procedure.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
18
020 8758 0338 (Mon-Fri)
Recalling a preset station - DAB and FM
1. Press the On/Off button to switch on the radio.
2. Select the required waveband by pressing the DAB/FM/AUX
1
2
button.
3. MomentarilypressandreleasetherequiredPresetbutton.Thedisplay
will show, for example, "Empty preset" if no station has been stored
to that preset. If a preset has been stored, then the display will show
for example "Preset 01 Loaded".
3
4. Presets 6 to 10 are obtained by pressing and holding 5+ button and
Preset button 1 to 5. e.g preset 7 can be recalled by pressing and
holding 5+ button followed by pressing Preset button 2, then releasing
both buttons.
5. Your radio will then tune to the chosen preset station stored in the
preset memory.
4
4
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Setting the clock manually
Normally your radio will set its clock automatically using the DAB radio
signal. If no DAB signal is available and you need to set the time manually,
please follow the procedure shown below.
1. Press the On/Off button to switch on the radio.
2. To set the clock time, press the Menu button once or twice as needed
until "Main Menu" appears on the display. Rotate the Tuning/Select
control until "Set up" shows on the display.
1
2
3. Press and release the Tuning/Select control to enter the Set up menu
and rotate until "Clock" appears on the display. Press and release the
Tuning/Select control to enter clock setup.
4. Rotate the Tuning/Select control until "Manual clock" appears on the
display.
5. Press and release the Tuning/Select control to enter the manual
setting procedure. The hour digits will flash on the display.
6. Rotate the Tuning/Select control to set the desired hour.
2-8
7. Press and release the Tuning/Select control to enter the hour setting.
The minute digits will then flash on the display.
8. Rotate the Tuning/Select control to set the desired minute.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
20
020 8758 0338 (Mon-Fri)
9. Press and release the Tuning/Select control to enter the minutes
setting. The day of the month will then flash on the display.
10. Rotate the Tuning/Select control to change the day as needed.
11. Press and release the Tuning/Select control to enter the day setting.
The month will then flash on the display.
9-15
12. Rotate the Tuning/Select control to select the correct month.
13. PressandreleasetheTuning/Selectcontroltoenterthemonthsetting.
The year will then flash on the display.
14. Rotate the Tuning/Select control to select the current year.
15. Press and release the Tuning/Select control to confirm the clock
setting and return to the normal radio display.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
To return to auto clock set mode
1. Press the On/Off button to switch on the radio. If necessary press and
release the DAB/FM/AUX button to put the radio into DAB mode.
1
1
2. Press the Menu button once or twice as needed until "Main Menu"
appears on the display. Rotate the Tuning/Select control until "Set
up" shows on the display.
3. Press and release the Tuning/Select control to enter the Set up menu
and rotate until "Clock" appears on the display. Press and release the
Tuning/Select control to enter clock setup.
4. Rotate the Tuning/Select control until "Auto clock" appears on the
display.
5. Press and release the Tuning/Select control.
2
6. The radio will immediately set its time according to the information
received with the DAB broadcast. The radio will return to normal radio
operation.
Note: If you select "Auto clock" and no DAB signal is found, you should
either position the radio or its aerial so that a signal can be received, or
revert to manual clock mode (see page 20).
2-5
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
22
020 8758 0338 (Mon-Fri)
Setting alarm time
Your radio has an alarm which can be set to wake you to DAB, FM radio or
beep type alarm. The alarm can be set to sound on Weekdays, Weekends,
Daily or Once. The alarm can be set when your radio is switched on
or in stand-by mode. In the event of a power interruption your radio has
a built in memory that will retain your alarm settings. The alarm feature
should only be used when the radio is powered from the mains.The radio's
clock does not operate when the radio is in standby and powered solely
from its batteries.
Note: If no buttons are pressed for 5 seconds, your radio will exit the
alarm setup.
1. Press the On/Off button to switch on the radio if required.
1
2
2. Press the Menu button once or twice as needed until "Main Menu"
appears on the display. Rotate the Tuning/Select control until "Utility"
shows on the display.
3. Press and release the Tuning/Select control to enter the Utility menu
and rotate until "Alarm" appears on the display. Press and release the
Tuning/Select control to enter alarm setup.
4. RotatetheTuning/SelectcontroltoselectOnorOFF.IfOFFisselected
any current setting for that alarm will be cancelled.
2-7
5. Choose the "On" setting then press and release the Tuning/Select
control the hour digits will flash on the display.
6. Rotate the Tuning/Select control to set the desired alarm hour.
7. Press and release the Tuning/Select control to enter the hour setting.
The minute digits will then flash on the display.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
8. Rotate the Tuning/Select control to set the desired minute.
9. Press and release the Tuning/Select control to enter the minutes
setting. The alarm day option will flash on the display.
10. Rotate the Tuning/Select control to choose the desired alarm day
option.
8-16
Weekdays
Weekends
Daily
- Will sound only on weekdays
- Will sound only on weekends
- Will sound everyday
Once
- Will sound at one time only
•
Ifsettingthealarmtoonceonly,continuewithstep11below.Otherwise
skip to 17 on the following page.
11. Press and release the Tuning/Select control to enter the setting. The
alarm day will flash on the display.
12. Rotate the Tuning/Select control to choose the desired alarm day of
the month.
13. Press and release the Tuning/Select control to enter the day setting.
The alarm month will flash on the display.
14. Rotate the Tuning/Select control to choose the desired alarm
month.
15. PressandreleasetheTuning/Selectcontroltoenterthemonthsetting.
The alarm year will flash on the display.
16. Rotate the Tuning/Select control to choose the desired alarm year.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
24
020 8758 0338 (Mon-Fri)
17. Press and release the Tuning/Select control to enter the setting. The
alarm source option will flash on the display.
18. The alarm can be set to DAB, FM or buzzer. For whichever radio mode
is selected, the radio alarm may be set to any of the stations which
have been stored as presets or to the last station listened to.
Rotate the Tuning/Select control to highlight either 'Buzzer' or the
required radio mode. Press the control to confirm the selection.
17-20
19. If setting the alarm to a radio option, rotate the Tuning/Select control
to highlight the desired "preset 1 -10" or rotate until "Last played" is
selected. Press and release the Tuning/Select control.
Note that you can only set the alarm to use a preset which has already
been stored.
20. In order to store the alarm settings you will need to save the settings.
Rotate the Tuning/Select control until "Yes" is highlighted on the
display. Press the Tuning/Select control to confirm alarm settings
and return to normal radio mode.
If you decide not to save the settings, highlight "No" and then press
the control your radio will return to normal radio mode without saving
the setting.
Note: If you make a mistake at any point while setting the alarm, press
the Menu button to go back to the previous screen.
The radio alarm is indicated in the display by the symbol and the buzzer
alarm is indicated by the
symbol when in stand-by. When your radio is
set to wake by the radio alarm, your radio will switch to either the selected
preset station or last listened. Be sure to set the volume to a suitable level
if using DAB or FM options.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
To view alarm setting
1. To view the alarm setting follows step 1-5 on page 23. Press the
Tuning/Select control or the Select button to cycle through each of
the settings for the chosen alarm.
2
1,2
2. YoumayrotatetheTuning/SelectcontrolorpresstheTuningUp/Down
buttonstomodifyanyparticularsettingifdesired,pressingtheTuning/
Select control or the Select button to enter the modification.
1,2
2
Cancelling alarm
The buzzer or radio alarm will sound at the selected times for up to 60
minutes unless cancelled. If the radio cannot connect to the specified radio
station, the buzzer will be used instead.
1. When the alarm is sounding press the On/Off button to cancel an
1
alarm and return to stand-by mode.
2. To cancel at any other time, enter the alarm setup menu and set the
alarm On/Off option to "Off". See steps 1-4 page 23.
Snooze
1. The buzzer or radio alarm can be silenced for 9 minutes by pressing
the Tuning/Select control or the Select button.
When the Snooze function has been activated during an alarm, the
alarm symbol will flash on the display. This sequence can be repeated
during the 60 minute alarm period.
1
2
1
2. In order to cancel the Snooze timer while the alarm is suspended,
press the On/Off button.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
26
020 8758 0338 (Mon-Fri)
Sleep function
Your radio can be set to turn off after a preset time has elapsed. The
sleep setting can be adjusted between 5 and 120 minutes in 5 minute
increments.
1. Press the On/Off button to switch on the radio.
2. Press the Menu button once or twice as needed until "Main Menu"
appears on the display. Rotate the Tuning/Select control until "Utility"
shows on the display.
1,6
2
3. Press and release the Tuning/Select control to enter the Utility menu
and rotate until "Sleep" appears on the display. Press and release the
Tuning/Select control to enter sleep setup.
4. Rotate the Tuning/Select control until the required sleep time setting
is selected. Press Tuning/Select control to confirm the setting. The
sleep timer can be set to between 5 and 120 minutes, or to Off.
5. Your radio will switch into stand-by mode after the preset time has
elapsed. If running on batteries it will switch off completely shortly
afterwards.
6. To cancel the sleep time before the preset time has elapsed and to turn
2-6
off the radio, press the On/Off button to turn the unit off manually.
To cancel the sleep timer and leave the radio playing, go back into the
sleep timer settings (steps 1-4 above) and select the Off option in step
4. Alternatively, simply press the On/Off button twice in succession to
cancel the timer and switch the radio back on again.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Nap timer
The Nap timer facility allows you to set your radio to wake you after a
predetermined interval (up to 2 hours) without needing to set the alarm.
The nap timer can be set when your radio is switched on or in stand-by
mode. The nap timer should only be used when the radio is powered from
the mains. The radio's clock does not operate when the radio is in standby
and powered solely from its batteries.
1
2
1. Press the On/Off button to switch on the radio if required.
2. Press the Menu button once or twice as needed until "Main Menu"
appears on the display. Rotate the Tuning/Select control until "Utility"
shows on the display.
3. Press and release the Tuning/Select control to enter the Utility menu
and rotate until "Nap" appears on the display. Press and release the
Tuning/Select control to enter Nap timer setup.
4. Rotate the Tuning/Select control until the required Nap time setting
is selected. Press Tuning/Select control to confirm the setting. The
Nap timer can be set to between 5 and 120 minutes (in 5 minute
increments) or to Off.
5. The Nap Timer indicator
will show on the display when in
2-6
stand-by mode. When the selected Nap timer has elapsed, the buzzer
will sound.
6. To cancel the buzzer press the On/Off button.To disable the Nap timer
go back into the Nap timer settings (steps 1 to 4 above) and select
the Off option in step 4.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
28
020 8758 0338 (Mon-Fri)
Dimmer function
The brightness of the display can be adjusted for when the radio is in
Stand-by and for when it is in use. If you use the unit in a bedroom, you
may prefer a lower stand-by brightness level than the standard setting.
The dimmer can be set to low, mid, high and an almost off 'night time'
setting.
1. Press the On/Off button to switch on the radio.
1
2
2. Press the Menu button once or twice as needed until "Main Menu"
appears on the display. Rotate the Tuning/Select control until "Set
up" shows on the display.
3. Press and release the Tuning/Select control to enter the Set up menu
and rotate until "Dimmer" appears on the display. Press and release
the Tuning/Select control to enter dimmer setup.
4. To adjust the display brightness when the radio is switched on rotate
the Tuning/Select control until "Active mode" is highlighted on the
display.
To adjust the display brightness when the radio is in stand-by rotate
the Tuning/Select control until "Standby mode" is highlighted.
Press the control to enter the selected brightness adjustment mode.
2-6
5. To adjust the brightness level rotate the Tuning/Select control.
6. The backlight level will change as the control is rotated so that you
can see the effect of each setting. Note that the backlight is almost
completely off at zero setting. Press the Tuning/Select control to set
the level.
Download from Www.Somanuals.com. All Manuals Search And Download.
29
7. Alternatively you can press the Dimmer button on your radio to
select the dimmer brightness from low, mid, high and an almost off
'night time' setting.
When the radio is in Stand-by mode, pressing a button or turning the
rotary control will cause the radio to switch to the normal brightness level
for a few seconds. This is so that even if the Stand-by brightness level
is set to zero (almost off), it is still possible to see the time by quickly
pressing a button.
7
Software version
The software display cannot be altered and is just for your reference.
1. Press the On/Off button to switch on the radio.
1
2
2. Press the Menu button once or twice as needed until "Main Menu"
appears on the display. Rotate the Tuning/Select control until "Set
up" shows on the display.
3. Press the Tuning/Select control to enter the Set up menu and rotate
until "Version" appears on the display. Press and release the Tuning/
Select control the display will show the radio software information.
4. After a few seconds your radio will return to the normal radio display
mode.
2-4
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
30
020 8758 0338 (Mon-Fri)
Auxiliary input socket
1. Connect a stereo or mono audio source (i.e. CD player, MP3 player,
etc.) to the Auxiliary input socket.
2
3
2. Press the On/Off button to switch on the radio.
3. Press and release the DAB/FM/AUX button until the display shows
"AUX".
4. Adjust the Volume control on your player and on the radio for
comfortable listening.
5. RemovethecablefromtheAuxiliaryinputsocketorpressandrelease
the DAB/FM/AUX button to cancel Auxiliary Input mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
31
Headphone socket
A3.5mm Headphone Socket located on the rear of your radio is provided
forusewitheitherheadphonesoranearpiece.Insertingaplugautomatically
mutes the internal loudspeaker.
Please be aware that sensitivity of headphones can vary widely. We
therefore recommend setting volume to a low level before connecting
headphones in the radio.
IMPORTANT:Excessivesoundpressurefromearphonesandheadphones
can cause hearing loss.
USB socket for software upgrade
A USB socket is provided at the rear of your radio for service use only to
permit the possibility of updates to the internal software in the future.
include a valid e-mail address you will receive notification of software
updates.
Clock display
When your radio is in Stand-by mode (when running from the mains) the
time and date will be displayed. The time is always shown using a 24 hour
clock format. When running the radio on batteries, the clock display may
sometimes be shown when the radio is put into standby, before the radio
switches off completely.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
32
020 8758 0338 (Mon-Fri)
System reset
If your radio fails to operate correctly, or some digits on the display are
missing or incomplete carry out the following procedure.
1. Press the On/Off button to switch on the radio.
2. Press the Menu button once or twice as needed until "Main Menu"
appears on the display. Rotate the Tuning/Select control until "Set
up" shows on the display.
1
3. Press the Tuning/Select control to enter the Set up menu and rotate
until "Factory Reset" appears on the display. Press and release the
Tuning/Selectcontrol.RotatetheTuning/Selectcontrolandhighlight
'Yes' to proceed.
2
If you do not wish to carry out a system reset, highlight "No" and then
press the control.
4. With"Yes"highlighted,presstheTuning/Selectcontrol.Afullresetwill
be performed. The station list and presets will be erased. The alarm
setting will be cancelled, display brightness and sleep timer settings
will be set to their default values. The clock will be reset and the unit
will behave as when first switched on (see page 6).
2-4
In case of malfunction due to electrostatic discharge, reset the product
as described above to resume normal operation. If you are not able to
perform the reset operation as above, removal and reconnection of the
power supply and batteries may be required.
If a problem persists our technical staff would be pleased to offer any
assistance on operating the radio. Our technical helpline number is
020 8758 0338.
Download from Www.Somanuals.com. All Manuals Search And Download.
33
•
•
•
The radio should not be exposed to dripping or splashing and that
no objects filled with liquids such as vases, shall be placed on the
radio.
It is recommended to operate the product such that there is a minimum
distance (10cm recommended) to adjacent objects in order to ensure
good ventilation.
The ventilation of the product should not be restricted by covering it or
its ventilation openings with items such as newspapers, table-cloths,
curtains etc.
General
Do not allow this radio to be exposed to water, steam or sand. Do not leave
your radio where excessive heat could cause damage such as in a parked
car where the heat from the sun can build up even though the outside
temperature may not seem too high. It is recommended that the DAB band
beusedwhereverpossibleasbetterresultsintermsofqualityandfreedom
from interference will usually be obtained than on the FM band.
•
•
No naked flame sources such as lighted candles should be placed on
the product.
It is recommended to avoid using or storing the product at extremes
of temperature. Avoid leaving the unit in cars, on window sills in direct
sunlight etc.
•
The nameplate is located on the underside of your radio.
Specifications
Circuit Features
Loudspeaker
Power Requirements
Mains
2 x 79mm
3W
AC 110
240V 50/60 Hz (switching adaptor)
Batteries
6 x LR20 (D size)
Output Power
Battery Life
Headphone socket
Auxiliary input socket
3.5mm dia. Stereo
3.5mm dia. Stereo
Up to 150 hours of listening for 4 hours
a day at normal volume using alkaline cells.
(See page 5).
Aerial System
FM
Telescopic aerial
Telescopic aerial
DAB
Frequency Coverage
FM
DAB
87.5-108MHz
174.928 - 239.200MHz
The Company reserves the right to amend the specification without notice.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
34
020 8758 0338 (Mon-Fri)
Guarantee
This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component
breakdown, subject to the procedure stated below. Should any component or part fail during this guarantee period it will be repaired or replaced free
of charge.
The guarantee does not cover:
1. Damage resulting from incorrect use.
2. Consequential damage.
3. Receivers with removed or defaced serial numbers.
N.B. Damaged or broken telescopic aerials will not be replaced under guarantee.
Procedure:
Any claim under this guarantee should be made through the dealer from whom the instrument was purchased. It is likely that your Roberts' dealer
will be able to attend to any defect quickly and efficiently, but should it be necessary the dealer will return the instrument to the company’s service
department for attention. In the event that it is not possible to return the instrument to the Roberts' dealer from whom it was purchased, please contact
Roberts Radio Technical Services at the address shown on the rear of this manual.
These statements do not affect the statutory rights of a consumer.
ROBERTS RADIO TECHNICAL SERVICES
97-99 Worton Road
Isleworth Middlesex
TW7 6EG
Technical Helpline :- 020 8758 0338 (Mon-Fri during office hours)
Issue 1
© 2010 Roberts Radio Limited
Download from Www.Somanuals.com. All Manuals Search And Download.
|