Desktop User Guide
Includes Liberty Printer
110716-000 Revision H
Use this manual to help you:
•
Identify autoloader and printer parts
•
Configure the Liberty printer driver
Download from Www.Somanuals.com. All Manuals Search And Download.
7725 Washington Avenue South
Minneapolis, MN 55439
FAX: (952) 946-6956
Service: (952) 946-0004 (Asia/Pacific · Mexico/Latin America)
(800) 553-8312 (North America)
email: [email protected]
Rimage Technical Website:
Rimage Europe GmbH
Hans-Böckler-Straße 7
63128 Dietzenbach, Germany
Tel: +49-(0) 6074-8521-0
FAX: +49-(0) 6074-8521-21
Record of Revisions—PN 110716-000
Revision
H
Date
Description
1/27/04
Minor changes are in green text if the manual is viewed on the
computer monitor.
Copyright© 2004 Rimage Corporation
Rimage™ is a trademark of the Rimage Corporation.
Perfect Image® is a registered trademark of the Rimage Corporation.
Dell is registered trademark of Dell Computer Corporation.
Firewire is a registered trademark of Apple Computer, Inc.
All other trademarks and registered trademarks are the property of their respective owners.
Document Disclaimer
Rimage Corporation reserves the rights to make improvements to the equipment and software
described in this document at any time without any prior notice. Rimage Corporation reserves
the right to revise this publication and to make changes from time to time in the content
hereof without obligation of Rimage Corporation to notify any person or organization of such
revisions or changes.
This document may contain links to web sites that were current at the time of publication, but
may have moved or become inactive since. This document may contain links to sites on the
Internet, which are owned and operated by third parties. Rimage Corporation is not
responsible for the content of any such third-party site.
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED 1-Year Warranty
Rimage warrants, to the original end user only, that all non-consumable parts of the Rimage
Desktop autoloader products will be free from defects in material and workmanship for 12
months, according to the following terms:
•
Rimage will replace or repair, at Rimage's discretion, any non-consumable parts found
defective within the Warranty period.
•
•
Valid from the date Rimage ships the product to you.
Factory depot repair to Rimage Minnesota or Rimage Germany with a typical response of
15 business days (25 business days for International). On-site repair, Advanced
Replacement, or faster response Maintenance Contracts are available for an additional fee.
•
Rimage will pay ground service freight charges for components shipped to you.
The use of non-Rimage ink cartridges or refilling of ink cartridges voids the equipment
warranty or maintenance coverage. Any applicable ink cartridge warranty shall not apply to
Rimage ink cartridges that have been refilled, remanufactured, refurbished, misused, or
tampered with in any way.
This Warranty Does Not include the following:
•
•
•
•
Work done at the customer's location, or customer's loss of data.
Shipment costs of equipment or components returned to the Rimage factory.
Software and/or firmware enhancements released after purchase of the product.
Equipment or parts that were tampered with, misused, neglected, or that were modified in
any respect without the written consent of Rimage.
•
•
Equipment or parts that have been damaged due to shipping or accidents, or damaged by
lightning, storms, water, or power surges.
Printer consumables including ink cartridges or print head.
You may not assign this Warranty without Rimage's written consent. Rimage is the intended
beneficiary of this Warranty; if there is any inconsistency between this Warranty and any
other agreement included with or relating to Rimage products, this Warranty shall govern. If
any term of this Warranty is illegal or unenforceable, the legality and enforceability of the
remaining provisions are not affected or impaired. This Warranty is to be interpreted under
the laws of the State of Minnesota, without giving effect to conflict of law rules.
Rimage must receive written notice of any claimed defect or failure to perform within five (5)
days after such failure or defect is first observed. For warranty service, call Rimage at (952)
946-0004. For Europe, call +49-(0) 6074-8521-0.
The Limited Warranty set forth above is Rimage's only Warranty in connection with the
Desktop family of products. All other Warranties, whether written or oral, express or implied,
contractual or statutory, including, but not limited to any Warranties of merchantability or
fitness for any particular purpose are specifically excluded and disclaimed. In no event shall
Rimage's liability under this Warranty exceed the obligation to repair or replace, at Rimage's
discretion, a Warranted product, and, without limiting the foregoing, Rimage's liability under
this Warranty shall not exceed the cost of the covered product.
To check order shipment information, return goods data, shipping details, or tracking specifics
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Safety Precautions............................................................................................................... vi
Chapter 1 – Overview and Contents----------------------------------------------------------------------------7
Box Contents.............................................................................................................................. 7
Chapter 2 – User Guide --------------------------------------------------------------------------------------------8
Align Ink Cartridges........................................................................................................... 11
Change Printer Driver Settings......................................................................................... 16
Clean Cartridges............................................................................................................ 26
Tray Controller................................................................................................................... 27
Tray Controller Help..................................................................................................... 27
Online Help......................................................................................................................... 29
v
Download from Www.Somanuals.com. All Manuals Search And Download.
CD and DVD Recording Software Disclaimer
This Product, Software, or Documentation may be designed to assist you in reproducing material
in which you own the copyright or have obtained permission to copy from the copyright owner.
Unless you own the copyright or have permission to copy from the copyright owner, you may be
violating copyright law and be subject to payment of damages and other remedies. If you are
uncertain about your rights, you should contact your legal advisor. If you are neither in
possession of the copyright nor have authorization from the owner of the copyright, unauthorized
copying of CDs violates national and international legislation and can result in severe penalties.
Safety Precautions
This manual and the indications on the product allow proper and safe operation. The indication marks
below help protect you and other persons from injury, and equipment from damage.
To ensure safety, please read the precautions in the online User Guide manual and familiarize yourself
with their meaning before using the equipment.
Warning! Ignoring this symbol and performing wrong operation may cause death or severe injury.
Caution Ignoring this symbol and performing wrong operation may cause bodily harm or
equipment damage.
WARNING:
The laser beam used by this CD Recorder is a Class 1 laser and may be harmful to the eyes. Do
not attempt to open the recorder. An authorized field technician should perform all service
procedures.
CAUTION:
For continued protection against risk of fire, replace the fuse only with same type and rating.
An authorized field technician should perform all service procedures.
WARNING:
Ink may be harmful if swallowed. Avoid contact with eyes. Ink contains nitrites. If ingested,
seek immediate medical attention. Keep out of reach of children.
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 – Overview and Contents
Overview
This manual provides the information needed to identify the parts of the autoloader, and
configure the Liberty printer driver. The Desktop autoloader consists of recorders, a printer, and
an autoloader for transferring discs. The Desktop autoloader and Rimage OfficeNet Software
runs only on Windows 2000 Professional, and Windows XP (Professional and Home editions).
Box Contents
After all the boxes are opened and the components are removed, you can use the check boxes
to check off the included components.
Desktop Autoloader:
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Desktop Autoloader
AC Power Cord
USB Cable
OfficeNet Software Suite disc
Desktop User Guide
Autoloader Control Cable
Firewire Cable
IEEE 1394 (Firewire) Host Adapter Card
Software Activation Card
Desktop QuickStart Directions
Software Suite 6 Getting Started Guide
Printer:
ꢀ
ꢀ
ꢀ
Liberty Printer
Color Ink Cartridge
Black Ink Cartridge
Computer: (Only if ordered with the Desktop Autoloader)
These parts are included only if a Rimage Control Center (computer) was ordered with the
autoloader.
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Computer
Monitor
Keyboard
Mouse and mouse pad
Two AC Power Cords
Inspect the shipping boxes before installing the hardware. Contact your reseller or Rimage
Corporation if items are missing or damaged.
7
Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 – User Guide
Desktop Autoloader Parts
This section describes the Desktop hardware and its features. The Desktop autoloaders have
several major functional parts as shown below:
Front View
1 – Liberty Printer
2 – Picker
5 – Printer Tray Door
6 – Recorder
9 – Output Spindle
10 – Carousel
3 – Printer Top Cover
4 – Printer Control Panel
7 – Operator Panel
8 – Supply Hopper
Desktop Operator Panel
The Desktop autoloader has an operator panel located on the right side of the autoloader. The
following status lights (LEDs) provide you with operational information.
1 – Power LED
2 – Active LED
3 – Mode LED
5 – Button LED
4 – Operator Button
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Power LED
The green power LED lights when the power switch is on.
Active LED
The yellow active LED lights when there is communication through the control port.
Mode LED
The mode LED lights when the button diagnostic function is selected.
Button LED
The yellow button LED, located in the operator button, is lit when the autoloader is paused. It
may also be lit during the button diagnostics. Directions for the Desktop Button Diagnostics
may be downloaded from the service procedures on the Rimage Technical Web site.
Desktop Operator Button
The operator button can be used to pause the Desktop autoloader from processing discs.
Pausing the autoloader is used so the operator can add and remove discs from output spindle,
or change ink cartridges. To pause the Desktop autoloader, press the operator button when a
disc is not in the printer, or being placed in the printer. To return to normal operation mode,
press the operator button again. When the button LED is on and the mode LED is off, the
autoloader is in the paused mode.
Desktop 4500 Bin Configuration
Bins 1 and 2 are configured as the default supply and output bins. The Desktop 4500 starts
picking unrecorded discs from bin 2 and places the completed and failed discs into bin 3. When
Bin 2 is empty, it picks discs from bin 1 and places them into bin 2. When removing the
completed discs, the reject discs should be removed from the completed discs. The rejects
should have a reject label printed on the disc unless that function was disabled in the
Production Server options. Refer to the Reject Pattern Printing options located in the Printing
Parameters of the Production Server.
Another option is to configure the bins so there is one input bin, one output bin and one reject
bin. Refer to the Production Server online help file for directions.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Liberty Operator Panel
The Liberty printer operator panel has three buttons and four LEDs to indicate certain
conditions.
1 – Cancel Button
3 – Disc Button and LED
2 – Ink Cartridge Status LED 4 – Power Button and LED
Cancel Button: Not used.
Ink Cartridge Status LED: Flashes when an ink cartridge is low on ink, incorrectly
installed, or when the printer cover is open. To check the ink cartridge status, refer to
Disc Button and LED: The Disc button is used to move the tray in and out, and to
load a disc for manual printing used in checking alignments. The Disc LED illuminates
when a disc is on the tray.
Power Button and LED: The Power button is unused. The green Power LED is only
error state. Error conditions can be viewed at the Production Server, or in the status
field located inside the printer driver under the advanced tab.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Ink Cartridge Status
When the top cover is open, the ink cartridge cradle moves so that its arrow 6 points to one
of the ink cartridge status indicators, indicating the cartridge status as shown below.
1 – Color Ink Cartridge Trouble
2 – Black Ink Cartridge Trouble
3 – Color Ink Cartridge Low
4 – Black Ink Cartridge Low
5 – Ink Cartridges Normal
6 – Status Indicator Arrow
In the figure above, the Status Indicator Arrow 6 is pointing to the Normal 5 status
problem solving information.
Warning
•
Ink may be harmful if swallowed.
•
•
•
•
•
Avoid contact with eyes.
Ink contains nitrites. If ingested, seek immediate medical attention.
Keep out of reach of children.
Refilling ink cartridges may result in damage to the cartridge or printer.
Rimage ink cartridges are not licensed for modification.
Note: You can only use authentic Rimage ink cartridges in the Liberty printer.
Align Ink Cartridges
For optimal print quality, align the ink cartridges using the steps below.
1. Windows 2000 – Select the Windows Start button and select Settings|Printers.
2. Windows XP – Select the Windows Start button and select Printers and Faxes.
3. Right-click on the Disc Color Printer and select Printing Preferences from the drop-
down menu.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Select the Advanced tab.
5. Select the Align Cartridges button.
If the buttons are grayed out, the tray controller must be started. For Windows 2000, select
Windows’ Start|Programs|Rimage|Utilities|Disc Color Tray Controller to start
the Rimage Tray Controller.
For Windows XP, select Windows’ Start|All Programs|Rimage|Utilities|Disc Color
Tray Controller to start the Rimage Tray Controller.
The Align Cartridges dialog displays.
6. Select the Print Test Pattern 1 button and the printer tray comes out.
7. Place an inkjet printable disc on the printer tray.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
8. When prompted, press the Disc button on the printer to close the tray and start the
printing test.
9. There are four pattern groups (A, B, C, D) printed on the disc. Each group has a
numbered index, shown as a set of numbers from 1 to 21. Locate the two lines that make
the straightest line and enter the matching index value for each lettered group. You may
enter decimal values if the lines are not exactly aligned.
In the above example, looking at group A, the straightest lines are at A11. Enter 11 in the
group A field. In group C, the straightest lines are at C11. Enter the remaining groups
and select Save.
10. Place a disc on the printer tray and select the Print Test Pattern 2 button.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
11. When prompted, press the Disc button to print the following test pattern on a disc.
12. The black and magenta lines should be straight as shown above. If they are not inline with
each other, repeat the alignment process starting at step 5.
13. Close the Align Cartridges window.
14. Close the Printing Preference window.
15. Press the Disc button to close the printer tray. If the printer tray does not close, close the
tray controller application and open it again. Wait for the tray controller to initialize,
about 60 seconds, and press the Disc button to close the tray.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Label Design Requirements
This section provides some things you need to consider before you create a label. Your first
consideration is the media you will use. Select media that has an ink printable surface.
The OfficeNet software comes with a label editor called “CD Designer” which is installed on
your system. Use CD Designer to design your labels.
If you have another software application that you prefer, you can create the label image and
output it as an Acrobat (.pdf) file, or you can output a Windows bitmap (.bmp) file. The
Acrobat file can print directly to the Liberty through the Rimage software. If you output a
Windows bitmap file, insert it into CD Designer to create a label that prints with the Rimage
software. To create a label with another program, use the following criteria when creating a
label:
Color Depth: Save the artwork for the label with the color set to at least 256 colors; a higher
color setting is recommended.
DPI: Use pictures or logos set to 300 DPI (Dots Per Inch).
Label Design Size: A full size disc is 120mm (4.723”) with a hub size that is 38mm (1.5”).
The actual printable area is around 118mm (4.65”). The printable area and hub sizes vary
depending on the disc manufacturer. The hole is 15mm (0.59”).
You can mask the outer non-printable area and print, or not print in the hub area. Set these
Media Requirements
Discs must be coated with a surface designed for ink-jet printing.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Change Printer Driver Settings
You can change the printer driver properties to select print quality, print orientation, ink
volume, or other image adjustments.
1. On the Start menu, point to Settings, and then click Printers.
2. Right-click the printer you want to change on the shortcut menu, and then left-click
Printing Preferences. The Liberty Disc Color Printer Printing Preferences dialog
box opens.
3. At the Setup tab, select the Print Quality (Best or Normal) and select the Orientation
(Portrait or Landscape).
Best quality produces the highest print quality and can eliminate the 'banding' effect
that sometimes occurs in solid print areas. However, Best quality prints slower than
Normal quality for most applications.
Normal quality delivers high-quality output at a faster print rate.
Portrait orientation prints the label vertically so the top of the label comes out of the
printer first. Landscape orientation prints the label horizontally so the top of the label
is located on the side of the printer tray.
Select the CD Type (Inkjet Premium, Photo, or Plain) and CD Size (Standard
CD/DVD (120 mm). Photo prints the highest quality and Inkjet Premium is the next
step lower, but provides a faster print while maintaining a high quality print. The
Plain setting provides the fastest print.
The Photo and Inkjet Premium settings eliminate banding issues. You may select
Factory Settings to return all settings to their factory default settings.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Select the Features tab.
5. Select Advanced Features to open the Advanced Features dialog.
6. Adjust the Ink Volume if desired. Drag the slider to the left for lighter images (less
ink) or to the right for denser images (more ink). Select OK when done.
The Dry Time and Low Memory Mode selections are not used.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Adjust the Color tab settings (Print in Grayscale, Saturation, Brightness, and Color
Tone) as needed.
•
•
Print in Grayscale print colors as various shades of gray.
o
High Quality uses the tri-color ink cartridge to print high quality
grayscale images.
o
o
Black Only uses the black ink cartridge to print in grayscale.
Optimize for Photocopy or Fax is not used.
Saturation adjusts the relative intensity of printed colors from Muted to
Vibrant.
•
•
•
Brightness adjusts the lightness or darkness of the printed image.
Color Tone adjusts the perceived warmth or coolness of printed colors.
Factory Settings returns the Color tab parameter changes to the factory set
defaults.
Select OK to accept all the changes, or select Cancel to ignore the changes.
Note: The Help function does not apply to this printer.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Tab
The Advanced tab provides access to diagnostic functions, alignments, and a flash update
function. The Advanced tab also displays Liberty status information, including Driver, Printer,
TCH, Loader, and Status information.
Driver - displays the installed Liberty Printer Driver version number.
Printer - displays the port number, serial number, and firmware version of the printer.
TCH (Tray Controller Handler) - displays the Handler name and version number.
Loader - displays the Rimage Desktop autoloader it is physically attached to and the version
and serial number of the autoloader. If the Liberty printer displays (Not Attached), the
autoloader control cable may not be connected.
Status - displays the current Liberty printer operating status.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
The Printing section allows you to run a test print without running the complete system. A
print file (.prn) must be created prior to running this operation.
1. At the Printing Preferences dialog, click the Advanced tab to open the following dialog.
2. Select the Print File button and select a pre-rendered file to print for print testing
purposes. The file you select must have been prepared for the Liberty printer. The label
file will be printed as many times as set in the Copies box.
Settings
The Settings selection lets you select whether to ignore the Disc Button or run the Masker
application.
Ignore Disc Button
If selected, causes the printer not to wait for the activation of the disc button before printing.
This option is ignored when connected to a Desktop autoloader.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Run Masker
When selected, the Rimage Raster Masker displays allowing you to adjust the mask (non-
printable area) settings for the selected media type (Standard CD/DVD 120 mm only). This
works well when printing rectangle or square pictures on the disc and you do not want the
edges printed. If you print on the edges of a disc where there is not printable surface, the ink
will smear or run.
Standard Area Settings let you adjust the standard outer and inner diameter settings, etc.
Hub Settings let you select the Print On Hub feature and adjust the related outer and inner
diameter settings.
Parameter Unit lets you switch between a unit of measure of times 1.0 mm or times 0.1 mm.
Maintenance
The maintenance section allows you to select alignment functions, diagnostics, or update the flash.
Center Image – The Center Image function is only required if the printed image is not
centered on the label. Directions are found on the next page.
Update Loader Flash – Rimage recommends using the Production Server to update the
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Center Image
This function is used only when the printed image is not centered on the disc.
1. Stop all orders from processing. You can press the operator button on the Desktop autoloader
or pause orders from the Production Server software.
2. Select the windows Start menu and select |Settings|Printers|.
3. Right-click on Disc Color Printer and select Printing Preferences.
4. Select the Advanced tab and select the Center Image button.
5. Select the Print Test Pattern button and the printer tray opens.
6. Place a full sized disc (120mm) on the printer tray.
7. When prompted, press the Disc button to close the printer tray.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
8. When it has finished printing, rotate the disc 180 degrees. Align three of the Position Lines,
located on the outer edges of the disc, to the Tray Bracket Edge as shown here.
1 – Position Lines
2, 3, 4 – Tray Bracket Edge
9. Select the Print Test Pattern button again.
10. When prompted, press the Disc button to close the printer tray.
11. When done printing, remove the disc.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
12. Look at where each long line crosses the set of index lines.
13. Enter the decimal index value where the long line crosses the index line in the Horizontal and
Vertical group. Enter negative numbers with a negative character (-). Each line has a value of
0.5 units. The Horizontal value from above would be about –1.2.
14. Select the Save Settings button.
15. To verify that the new values corrected the offset, place a new disc on the printer tray.
16. Select the Print Test Pattern button.
17. When prompted, press the Disc button to close the printer tray.
18. When it has finished printing, rotate the disc 180 degrees. Align the Position Lines on the
outer edges of the disc to the printer’s tray bracket.
19. Select the Print Test Pattern button.
20. When prompted, press the Disc button to close the printer tray.
21. After it completed printing the final pattern, remove the disc and check if the long lines cross
the 0 index line.
22. If the long lines do not cross the zero index line in the vertical and horizontal groups, make
final corrections and try again.
23. Select the Close button.
24. Select the Disc button to close the printer tray.
25. Close the Printing Preference window.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Diagnostics
At the Advanced tab under Maintenance, the Diagnostics dialog provides several device tests.
Mech
Select Power Off and Power On to cycle power to the tray mechanism. Select the Power ON
button to resume operation.
Cartridges
Select the Validate button to verify if the ink cartridges are authentic ink cartridges.
Select the Test button to test communications between the printer and the cartridges.
Tray Sensors
The tray sensors function is for use only by, or at the direction of, Rimage Service personnel.
Contact Rimage Corporation for additional information.
Update Autoloader Flash
To update the autoloader’s flash firmware, download the latest flash from the Rimage Website.
Save the flash file to the root of your local hard drive.
1. Open Production Server.
2. Stop the automation by making sure the Start button is not depressed as shown in
here.
3. Insert Rimage software suite disc into the CD-ROM drive or download the latest flash
version from the Rimage web site.
4. Unzip the flash file if it was downloaded from the website.
5. From the menu bar, select Options/Update Transporter Flash.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Select the location of the flash file from the Rimage OfficeNet Software Suite disc or
the saved location if it was downloaded from the website.
7. Double-click the filename name.bin file.
8. The updating procedure runs until the flash file is updated to the autoloader. A dialog
box appears that it completed the flash update.
Clean Cartridges
This function is used to clean or open the ink nozzles. The nozzles may become clogged from dry
ink. This causes poor print from one or more nozzles not spraying one of the colored inks.
1. Stop all orders from processing. You can press the operator button on the Desktop
autoloader or pause orders from the Production Server software.
2. Select the windows Start menu and select |Settings|Printers|.
3. Right-click on Disc Color Printer and select Printing Preferences.
4. Select the Advanced tab and select the Clean Cartridges button.
5. Select the Light button to clean the ink nozzles using the least amount of ink.
6. Try printing a test disc after cleaning the cartridges. If it still is not printing properly,
use a heavier level if the nozzles do not open up after using the light duty cleaning.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Tray Controller
The Rimage Tray Controller icon (
) is installed in the Windows Icon Tray once it was
initiated. The tray controller must be running for the printer to function.
The Tray Controller application automatically runs in the background after the Production
Server starts. The Tray Controller is only available if the Liberty Printer Driver was installed.
The Printer Tray opens only if the PC is connected to the printer and the Tray Controller is
running.
Tray Controller Help
This section is a helpful procedure if the printer tray did not come out after pressing the disc
button.
1. Make sure the USB cable is plugged in at the printer and the PC.
2. Make sure the tray controller application is running. This is seen in the icon tray as shown here.
3. Make sure the tray controller application has finished initializing, by double-clicking on
the tray controller icon.
4. Check for the status. If the status is OK and there are no error messages in the tray controller
application, close the tray controller application and unplug the USB cable from the printer.
5. Plug the USB cable back in the printer.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Select the windows Start menu and select |Programs|Rimage|Utilities| and select
Disc Color Printer Tray Controller.
7. After the tray controller has completed the initialization, try opening the printer tray again by
pressing the disc button.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Find Additional Information
Each software module contains online Help. Help features a Table of Contents pane on the
left side of the window and the selected topic on the right. You may need to resize the
windows to fit your screen.
Locate your printed Software Suite 6 Getting Started Guide for a short tutorial on creating
your first disc.
Online Help
1. In QuickDisc for Windows, on the Help menu, click Help Topics. The initial QuickDisc
help window displays.
2. Select the desired Help topic from the Table of Contents pane.
Technical Support and Product Updates
Support for the Desktop 1500 and 4500 is available directly from your authorized reseller or
distributor. Online support for the Desktop autoloader is available on our website at
Be sure to register your Desktop autoloader online or complete and return the registration
card so we can notify you of upgrades as they become available.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
|