Renesas Power Supply HD74LV1G14A User Guide

HD74LV1G14A  
Inverter with Schmitt–trigger Input  
REJ03D0067-0700  
Rev.7.00  
Mar 21, 2008  
Description  
The HD74LV1G14A has an inverter with schmitt–trigger input in a 5 pin package. Low voltage and high-speed  
operation is suitable for the battery powered products (e.g., notebook computers), and the low power consumption  
extends the battery life.  
Features  
The basic gate function is lined up as Renesas uni logic series.  
Supplied on emboss taping for high-speed automatic mounting.  
Electrical characteristics equivalent to the HD74LV14A  
Supply voltage range : 1.65 to 5.5 V  
Operating temperature range : –40 to +85°C  
All inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V)  
All outputs VO (Max.) = 5.5 V (@VCC = 0 V)  
Output current ±6 mA (@VCC = 3.0 V to 3.6 V), ±12 mA (@VCC = 4.5 V to 5.5 V)  
All the logical input has hysteresis voltage for the slow transition.  
Ordering Information  
Package Code  
(Previous Code)  
PTSP0005ZC-A  
(CMPAK-5V)  
Package  
Taping Abbreviation  
(Quantity)  
Part Name  
Package Type  
CMPAK–5 pin  
VSON–5 pin  
Abbreviation  
HD74LV1G14ACME  
HD74LV1G14AVSE  
CM  
E (3000 pcs/reel)  
E (3000 pcs/reel)  
PUSN0005KA-A  
(TNP-5DV)  
VS  
Note: Please consult the sales office for the above package availability.  
Outline and Article Indication  
• HD74LV1G14A  
Index band  
Marking  
L A  
= Control code  
CMPAK–5  
REJ03D0067-0700 Rev.7.00, Mar 21, 2008  
Page 1 of 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HD74LV1G14A  
Absolute Maximum Ratings  
Item  
Symbol  
Ratings  
–0.5 to 7.0  
–0.5 to 7.0  
–0.5 to VCC + 0.5  
–0.5 to 7.0  
–20  
Unit  
V
Test Conditions  
Supply voltage range  
Input voltage range *1  
VCC  
VI  
V
Output : H or L  
Output voltage range *1, 2  
VO  
V
VCC : OFF  
Input clamp current  
IIK  
IOK  
IO  
mA  
mA  
mA  
VI < 0  
Output clamp current  
Continuous output current  
±50  
VO < 0 or VO > VCC  
VO = 0 to VCC  
±25  
Continuous current through  
VCC or GND  
I
CC or IGND  
±50  
mA  
Maximum power dissipation  
at Ta = 25°C (in still air) *3  
PT  
200  
mW  
°C  
Storage temperature  
Tstg  
–65 to 150  
Notes:  
The absolute maximum ratings are values, which must not individually be exceeded, and furthermore no two  
of which may be realized at the same time.  
1. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are  
observed.  
2. This value is limited to 5.5 V maximum.  
3. The maximum package power dissipation was calculated using a junction temperature of 150°C.  
Recommended Operating Conditions  
Item  
Symbol  
VCC  
Min  
1.65  
0
Max  
5.5  
5.5  
VCC  
1
Unit  
V
Conditions  
Supply voltage range  
Input voltage range  
Output voltage range  
VI  
V
VO  
0
V
VCC = 1.65 to 1.95 V  
VCC = 2.3 to 2.7 V  
VCC = 3.0 to 3.6 V  
2
IOL  
6
12  
–1  
–2  
–6  
–12  
85  
VCC = 4.5 to 5.5 V  
Output current  
mA  
°C  
VCC = 1.65 to 1.95 V  
VCC = 2.3 to 2.7 V  
VCC = 3.0 to 3.6 V  
VCC = 4.5 to 5.5 V  
IOH  
Operating free-air temperature  
Ta  
–40  
Note: Unused or floating inputs must be held high or low.  
REJ03D0067-0700 Rev.7.00, Mar 21, 2008  
Page 3 of 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HD74LV1G14A  
Electrical Characteristic  
Ta = –40 to 85°C  
Item  
Symbol VCC (V) *  
Min  
Typ  
Max  
VCC×0.75  
1.75  
2.31  
3.50  
Unit  
Test condition  
1.65 to 1.95  
2.5  
+
VT  
3.3  
5.0  
1.65 to 1.95 VCC×0.25  
Threshold  
voltage  
2.5  
0.75  
0.99  
1.5  
VT  
V
3.3  
5.0  
1.65 to 1.95  
2.5  
0.1  
VCC×0.4  
1.0  
0.25  
0.33  
0.5  
VT  
3.3  
1.32  
2.0  
5.0  
Min to Max VCC–0.1  
IOH = –50 µA  
1.65  
2.3  
1.4  
2.0  
2.48  
3.8  
IOH = –1 mA  
IOH = –2 mA  
IOH = –6 mA  
IOH = –12 mA  
IOL = 50 µA  
IOL = 1 mA  
VOH  
3.0  
4.5  
Output voltage  
Input current  
V
Min to Max  
1.65  
0.1  
0.3  
VOL  
2.3  
0.4  
IOL = 2 mA  
3.0  
0.44  
0.55  
±1  
IOL = 6 mA  
4.5  
IOL = 12 mA  
VIN = 5.5 V or GND  
IIN  
0 to 5.5  
µA  
Quiescent  
supply current  
VIN = VCC or GND,  
IO = 0  
ICC  
5.5  
10  
µA  
Output leakage  
current  
IOFF  
CIN  
0
5
µA  
VIN or VO = 0 to 5.5 V  
Input capacitance  
3.3  
3.0  
pF  
VIN = VCC or GND  
Note: For conditions shown as Min or Max, use the appropriate values under recommended operating conditions.  
REJ03D0067-0700 Rev.7.00, Mar 21, 2008  
Page 4 of 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HD74LV1G14A  
Switching Characteristics  
VCC = 1.8 ± 0.15 V  
Ta = 25°C  
Typ  
Ta = –40 to 85°C  
Test  
FROM  
TO  
Item  
Symbol  
Unit  
Conditions (Input) (Output)  
Min  
Max  
32.0  
43.0  
Min  
1.0  
1.0  
Max  
34.0  
46.0  
16.8  
CL = 15 pF  
Propagation  
delay time  
tPLH  
tPHL  
ns  
A
Y
23.8  
CL = 50 pF  
VCC = 2.5 ± 0.2 V  
Ta = 25°C  
Typ  
Ta = –40 to 85°C  
Test  
FROM  
TO  
Item  
Symbol  
Unit  
Conditions (Input) (Output)  
Min  
Max  
19.7  
24.0  
Min  
1.0  
1.0  
Max  
22.0  
27.0  
10.5  
CL = 15 pF  
Propagation  
delay time  
tPLH  
tPHL  
ns  
A
Y
14.0  
CL = 50 pF  
VCC = 3.3 ± 0.3 V  
Ta = 25°C  
Typ  
Ta = –40 to 85°C  
Test  
FROM  
TO  
Item  
Symbol  
Unit  
Conditions (Input) (Output)  
Min  
Max  
12.8  
16.3  
Min  
1.0  
1.0  
Max  
15.0  
18.5  
8.3  
CL = 15 pF  
Propagation  
delay time  
tPLH  
tPHL  
ns  
A
Y
10.8  
CL = 50 pF  
VCC = 5.0 ± 0.5 V  
Ta = 25°C  
Typ  
Ta = –40 to 85°C  
Test  
FROM  
TO  
Item  
Symbol  
Unit  
Conditions (Input) (Output)  
Min  
Max  
8.6  
Min  
1.0  
1.0  
Max  
10.0  
12.0  
5.5  
CL = 15 pF  
Propagation  
delay time  
tPLH  
tPHL  
ns  
A
Y
7.0  
10.6  
CL = 50 pF  
Operating Characteristics  
CL = 50 pF  
VCC (V)  
Ta = 25°C  
Typ  
Item  
Symbol  
Unit  
Test Conditions  
f = 10 MHz  
Min  
Max  
3.3  
5.0  
8.5  
Power dissipation  
capacitance  
CPD  
pF  
10.0  
REJ03D0067-0700 Rev.7.00, Mar 21, 2008  
Page 5 of 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HD74LV1G14A  
Test Circuit  
VCC  
Output  
Input  
Pulse  
generator  
CL  
50  
Note: CL includes probe and jig capacitance.  
Waveforms  
tr  
tf  
VCC  
90%  
50%  
10%  
90%  
50%  
10%  
Input  
GND  
VOH  
50%  
50%  
tPLH  
Output  
VOL  
tPHL  
Notes: 1. Input waveform : PRR 1 MHz, Zo = 50 , tr 3 ns, tf 3 ns.  
2. The output are measured one at a time with one transition per measurement.  
REJ03D0067-0700 Rev.7.00, Mar 21, 2008  
Page 6 of 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HD74LV1G14A  
Package Dimensions  
JEITA Package Code  
SC-88A  
RENESAS Code  
PTSP0005ZC-A  
Previous Code  
MASS[Typ.]  
0.006g  
CMPAK-5 / CMPAK-5V  
D
A
e
Q
c
E
HE  
L
P
L
Reference  
Symbol  
Dimension in Millimeters  
A
A
L
1
A
3
Min  
0.8  
0
Nom  
Max  
1.1  
0.1  
1.0  
b
A
x
S
A
M
A1  
A2  
A3  
e
0.8  
0.9  
0.25  
0.22  
0.2  
b
0.15  
0.1  
0.3  
b
1
A
2
1
A
c
0.13  
0.11  
2.0  
0.15  
c
1
D
E
e
1.8  
2.2  
1.15  
1.25  
0.65  
2.1  
1.35  
A
y
S
S
e
1
H
E
1.8  
0.3  
0.1  
0.2  
2.4  
0.7  
b
L
L
1
0.5  
b
1
L
P
0.6  
l
1
c1  
x
0.05  
0.05  
0.35  
y
c
b
2
1
e
b
2
1.5  
l
1
0.9  
A-A Section  
Pattern of terminal position areas  
Q
0.25  
JEITA Package Code  
P-USON5-1.2x1.6-0.50  
RENESAS Code  
PUSN0005KA-A  
Previous Code  
MASS[Typ.]  
0.002g  
TNP-5D/TNP-5DV  
D
0.1  
1.0  
5
4
1
3
c
Dimension in Millimeters  
Reference  
Symbol  
Min Nom Max  
1.6  
D
E
1.55  
1.65  
1.1 1.2 1.3  
0.6  
A
A1  
A2  
b
0.2 0.3  
0.5  
0.15  
b1  
e
e
b
Lp  
x
y
ZD  
c
0.07 0.12 0.22  
c1  
HE  
L1  
1.55 1.6 1.65  
0.2  
REJ03D0067-0700 Rev.7.00, Mar 21, 2008  
Page 7 of 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan  
Notes:  
1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes  
warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property  
rights or any other rights of Renesas or any third party with respect to the information in this document.  
2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including,  
but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples.  
3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass  
destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws  
and regulations, and procedures required by such laws and regulations.  
4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this  
document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document,  
please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be  
5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a  
result of errors or omissions in the information included in this document.  
6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability  
of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular  
application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products.  
7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications  
or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality  
and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or  
undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall  
have no liability for damages arising out of the uses set forth above.  
8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below:  
(1) artificial life support devices or systems  
(2) surgical implantations  
(3) healthcare intervention (e.g., excision, administration of medication, etc.)  
(4) any other purposes that pose a direct threat to human life  
Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing  
applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all  
damages arising out of such applications.  
9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range,  
movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages  
arising out of the use of Renesas products beyond such specified ranges.  
10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain  
rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage  
caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and  
malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software  
alone is very difficult, please evaluate the safety of the final products or system manufactured by you.  
11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as  
swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products.  
Renesas shall have no liability for damages arising out of such detachment.  
12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas.  
13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have  
any other inquiries.  
RENESAS SALES OFFICES  
Refer to "http://www.renesas.com/en/network" for the latest and detailed information.  
Renesas Technology America, Inc.  
450 Holger Way, San Jose, CA 95134-1368, U.S.A  
Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501  
Renesas Technology Europe Limited  
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.  
Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900  
Renesas Technology (Shanghai) Co., Ltd.  
Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120  
Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7858/7898  
Renesas Technology Hong Kong Ltd.  
7th Floor, North Tower, World Finance Centre, Harbour City, Canton Road, Tsimshatsui, Kowloon, Hong Kong  
Tel: <852> 2265-6688, Fax: <852> 2377-3473  
Renesas Technology Taiwan Co., Ltd.  
10th Floor, No.99, Fushing North Road, Taipei, Taiwan  
Tel: <886> (2) 2715-2888, Fax: <886> (2) 3518-3399  
Renesas Technology Singapore Pte. Ltd.  
1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632  
Tel: <65> 6213-0200, Fax: <65> 6278-8001  
Renesas Technology Korea Co., Ltd.  
Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea  
Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145  
Renesas Technology Malaysia Sdn. Bhd  
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia  
Tel: <603> 7955-9390, Fax: <603> 7955-9510  
© 2008. Renesas Technology Corp., All rights reserved. Printed in Japan.  
Colophon .7.2  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Quadra Fire Stove MTVERNON AE CSB User Guide
Radica Games Games 76044 User Guide
Radio Shack Cordless Telephone 24 GHz 2 Line Digital Spread Spectrum Cordless Phone with Call Waiting Caller ID User Guide
Radio Shack Two Way Radio 21 1826 28 29 User Guide
Rangemaster Ventilation Hood RMG2H60SS User Guide
Samsung DVD Player DVD 1080PK User Guide
Samsung Home Security System Scc B2305 User Guide
Samsung Speaker System MXFS8000ZA User Guide
Sanyo DVD Player DC AVD8501 User Guide
Scott Flat Panel Television LCT37SHA User Guide