Renesas Network Card PCA7427G02 User Guide

PCA7427G02  
PROM Programming Adapter for M37272E8/EFFP  
User's Manual  
Rev.1.00  
September 1, 2003  
REJ10J0248-0100Z  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Chapter 1. Precautions for Safety ...........................................................................................4  
1.1 Safety Symbols and Meanings ..............................................................................4  
Chapter 2. Introduction...........................................................................................................6  
2.1 Things to Check When Unpacking .......................................................................6  
Chapter 3. Specifications ........................................................................................................7  
Chapter 4. How to Write the Program ....................................................................................8  
4.1 Programming Procedure........................................................................................8  
4.2 Attaching the Adapter to a PROM Programmer ...................................................9  
4.3 Setting the Jumper Switch.....................................................................................9  
4.4 Mounting an MCU into the Adapter ...................................................................10  
4.5 Precautions When Opening and Closing the IC Socket ......................................10  
4.6 Precautions When Handling the Adapter ............................................................11  
4.7 Setting the Programming Areas ..........................................................................11  
Chapter 5. Recommended PROM Programmers..................................................................11  
Chapter 6. Memory Maps .....................................................................................................12  
Chapter 7. Troubleshooting ..................................................................................................14  
7.1 Errors That Occur When Writing to PROM .......................................................14  
7.1.1 When Newly Purchased ........................................................................14  
7.1.2 Previously Written Normally ................................................................14  
7.2 MCUs Do Not Function Normally......................................................................15  
7.3 Other Precautions ................................................................................................15  
7.3.1 About the Recommended PROM Programmers...................................15  
7.3.2 About Reading Out of Device Identification Code ..............................15  
7.4 How to Request for Support................................................................................15  
To use the product properly  
Precautions for Safety:  
• Both in this User's Manual and on the product itself, several icons are used to insure  
proper handling of this product and also to prevent injuries to you or other persons,  
or damage to your properties.  
• The icons' graphic images and meanings are given in "Chapter 1. Precautions for  
Safety" (page 4). Be sure to read this chapter before using the product.  
( 3 / 18 )  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1. Precautions for Safety  
In both the user's manual and on the product itself, several icons are used to insure proper handling  
of this product and also to prevent injuries to you or other persons, or damage to your properties.  
This chapter describes the precautions which should be taken in order to use this product safely and  
properly. Be sure to read this chapter before using this product.  
1.1 Safety Symbols and Meanings  
If the requirements shown in the "WARNING"  
sentences are ignored, the equipment may  
cause serious personal injury or death.  
WARNING  
If the requirements shown in the "CAUTION"  
sentences are ignored, the equipment may  
malfunction.  
CAUTION  
It means important information on using this  
product.  
IMPORTANT  
In addition to the three above, the following are also used as appropriate.  
means WARNING or CAUTION.  
Example:  
CAUTION AGAINST AN ELECTRIC SHOCK  
means PROHIBITION.  
Example:  
DISASSEMBLY PROHIBITED  
means A FORCIBLE ACTION.  
Example:  
UNPLUG THE POWER CABLE FROM THE RECEPTACLE.  
The following pages describe the symbols "WARNING", "CAUTION", and "IMPORTANT".  
( 4 / 18 )  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARNING  
Warnings for Use Environment:  
• This equipment is to be used in an environment with a maximum ambient temperature of 35˚C. Care  
should be taken that this temperature is not exceeded.  
• Select the proper programming mode of the PROM programmer.  
CAUTION  
Caution to Be Taken for Modifying This Product:  
• Do not disassemble or modify this product. Disassembling or modifying this product can cause  
damage. Disassembling and modifying the product will void your warranty.  
Cautions to Be Taken for Handling This Product:  
• Use caution when handling this product. Be careful not to apply a mechanical shock such as falling.  
• Do not directly touch the connector pins of this product.  
• Be careful with the static electricity when handling this product and the MCU.  
Caution for Keeping This Product:  
• When not using this product for a long time:  
(1) Attach the connector pins of this product to the conductive sponge.  
(2) Put it into a conductive polyvinyl, and keep it in the package case shipped from the factory.  
(3) Store it in the place where humidity and temperature are low and direct sunshine does not  
strike.  
(4) When using this product, check the waste of sponge has not adhered to the connector pins.  
IMPORTANT  
When Using The Product:  
• Attach this product to the IC socket on the PROM programmer properly.  
• Mount the MCU to the IC socket of this product properly.  
• When opening and closing the IC socket of this product, be sure to keep it horizontal.  
• Do not use the PROM programmer's device identification code readout function.  
( 5 / 18 )  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2. Introduction  
The PCA7427G02 is a PROM programming adapter for Renesas 7200 Series of 8-bit MCUs. The  
adapter is a tool that can be used to write programs into an internal PROM of MCUs using a  
commercially available PROM programmer.  
This manual describes the specifications and the operation of the PCA7427G02.  
Figure 2.1 shows the external view of the PCA7427G02 and its constituent parts.  
Figure 2.1 External view of the adapter and its constituent parts  
2.1 Things to Check When Unpacking  
This product consists of the following parts listed in Table 2.1. When unpacking, check to see that  
it contains all of the components shown in Table 2.1 below.  
Table 2.1 Package components  
Main unit  
PCA7427G02  
PCA7414B  
Interface unit  
Connector  
PCA7402E (32-pin)  
This manual  
User's manual  
If any part is missing or there is any doubt about your product package, contact your local distributor.  
( 6 / 18 )  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3. Specifications  
Table 3.1 lists specifications of the PCA7427G02.  
Table 3.1 Specifications of the PCA7427G02  
M37272E8FP, M37272EFFP  
Applicable MCUs  
1 MHz  
Operating clock frequency  
(Supplied by the ceramic oscillator mounted on the adapter)  
Power supply  
IC socket  
Supplied from Vcc of the PROM programmer  
IC51-0422-393 (made by Yamaichi Electronics Co., Ltd.)  
Board to insert a programmable MCU  
(IC socket mounted on it)  
PCA7427G02  
Interface board  
(Connected by two rows of standard-pitch 18-pin connectors  
and two rows of standard-pitch 16-pin connectors to the  
upper and lower boards)  
Board  
configuration  
PCA7414B  
PCA7402E  
Board to connect to the PROM programmer  
(Standard-pitch 32-pin pin-header mounted)  
( 7 / 18 )  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 4. How to Write the Program  
This chapter describes procedures you need to follow when writing the program.  
For details on how to operate the PROM programmer, refer to the user's manual of the PROM  
programmer.  
4.1 Programming Procedure  
Follow these procedures (1) through (8) to write the program into the MCU.  
(1) Read the program into the PROM programmer.  
(2) Attach the adapter to the IC socket of the PROM programmer.  
For details, see "4.2 Attaching the Adapter to a PROM Programmer" (page 9).  
(3) Set the jumper switch (SW1).  
For details, see "4.3 Setting Jumper Switch" (page 9).  
(4) Mount the MCU into the adapter.  
For details, see "4.4 Mounting an MCU into the Adapter" (page 10).  
(5) Set the programming area with the PROM programmer.*1  
For details, see "4.7 Setting the Programming Areas" (page 11).  
(6) Check to erase the programming area.*2  
Using the PROM programmer's erase check function, check whether data can be written into the  
MCU's programming area.  
(7) Write the program into the programming area of the MCU using the PROM programmer.*2  
(8) Verify the programming area of the MCU using the PROM programmer to check whether the  
program has been written into the MCU correctly.*2  
Notes  
*1 Be sure to set the programming area. Otherwise the mode's shift to the programming mode may  
not be performed successfully. The erase check function and others may not also be performed  
completely.  
*2 Some PROM programmers perform the steps (6) to (8) automatically.  
( 8 / 18 )  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.2 Attaching the Adapter to a PROM Programmer  
As shown in Figure 4.1, attach the pin No. 1 of the PCA7402E connector (standard-pitch 32-pin pin-  
header mounted) to the pin No. 1 of the IC socket of the PROM programmer.  
Be careful when attaching the adapter because incorrect insertion can cause fatal  
damage to the MCU.  
Figure 4.1 Attaching the adapter to a PROM programmer  
4.3 Setting the Jumper Switch  
Set the jumper switch SW1 according to the MCU type to be programmed. For setting, see Table 4.1  
and Figure 4.2.  
• When write the program to the M37272E8FP...................................................... SW1: E8  
• When write the program to the M37272EFFP ..................................................... SW1: EF  
Table 4.1 Setting jumper switch  
MCU  
SW1  
E8  
M37272E8FP  
M37272EFFP  
EF  
Figure 4.2 Setting the jumper switch  
( 9 / 18 )  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.4 Mounting an MCU into the Adapter  
(1) As shown in Figure 4.3, set the slide bar in the center of the IC socket to the shaded area on the  
board.  
(2) As shown in Figure 4.3, mount the MCU into the IC socket with the No. 1 pin of the MCU matched  
to the No. 1 pin of the IC socket on the PCA7427G02.  
Be careful when inserting the MCU because incorrect insertion can cause fatal  
damage to the MCU.  
Top view  
Figure 4.3 Mounting an MCU  
4.5 Precautions When Opening and Closing the IC Socket  
When opening and closing the IC socket, hold the adapter horizontally as shown in Figure 4.4.  
Otherwise the inside of the IC socket may become damaged and cause an electrical insulation failure.  
Figure 4.4 Holding the adapter in a horizontal position  
( 10 / 18 )  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.6 Precautions When Handling the Adapter  
Do not touch the connector in the IC socket and the pins on the PROM programmer connector because  
dirt may cause an electrical insulation failure.  
When not using this product, attach the connector pins of this product to the conductive sponge as  
it was shipped from the factory.  
4.7 Setting the Programming Areas  
When writing the program into the MCU, be sure to set the programming area. And also, specify its  
device of the PROM programmer.  
Table 4.2 Programming areas  
PROM programmer  
ROM area  
of MCU  
MCU type name  
MCU area  
Device  
Programming area  
140016 - 3BFF16  
800016 - FFFF16  
140016 - 3BFF16  
800016 - FFFF16  
OSDROM area  
Internal ROM area  
Internal ROM area  
OSDROM area  
M5M27C101  
M37272E8FP  
0100016 - 0FFFF16 0100016 - 0FFFF16  
1140016 - 13BFF16 1140016 - 13BFF16  
M37272EFFP  
M5M27C101  
Chapter 5. Recommended PROM Programmers  
The PROM programmers listed in Table 5.1 are recommended for the adapter PCA7427G02. Using  
the actual products, we have verified that these PROM programmers can be used to write programs  
without problem. Nonconformity occurring by using any other PROM programmers can not be  
supported. For the latest type of PROM programmers, contact the manufacturer to confirm whether  
it can be used for your product.  
Table 5.1 Recommended PROM programmers  
Manufacturer  
Type name  
Device  
Programming voltage (VPP)  
12.5 V  
R4945  
Advantest  
Corporation  
M5M27C101 mode  
R4945A  
( 11 / 18 )  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6. Memory Maps  
Figures 6.1 and 6.2 show memory maps of the MCUs (M37272E8FP and M37272EFFP) and the  
PROM programmer.  
0000016  
0000016  
013FF16  
0140016  
013FF16  
0140016  
OSDROM  
(10 KB)  
OSDROM  
(10 KB)  
03BFF16  
03C0016  
03BFF16  
03C0016  
07FFF16  
0800016  
07FFF16  
0800016  
Internal ROM area  
(32 KB)  
Programming area  
(32 KB)  
0FFFF16  
0FFFF16  
Unused area  
1FFFF16  
MCU  
(M37272E8FP)  
PROM programmer  
(M5M27C101 mode)  
Figure 6.1 Memory map of the M37272E8FP  
( 12 / 18 )  
Download from Www.Somanuals.com. All Manuals Search And Download.  
0000016  
0000016  
00FFF16  
0100016  
00FFF16  
0100016  
Internal ROM area  
(60 KB)  
Programming area  
(60 KB)  
0FFFF16  
1000016  
0FFFF16  
1000016  
113FF16  
1140016  
113FF16  
1140016  
OSDROM  
(10 KB)  
OSDROM  
(10 KB)  
13BFF16  
13C0016  
13BFF16  
13C0016  
1FFFF16  
1FFFF16  
MCU  
(M37272EFFP)  
PROM programmer  
(M5M27C101 mode)  
Figure 6.2 Memory map of the M37272EFFP  
( 13 / 18 )  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 7. Troubleshooting  
The table below summarizes errors to be checked carefully before you determine them to be a fault.  
7.1 Errors That Occur When Writing to PROM  
7.1.1 When Newly Purchased  
Remedy  
Cause  
See page  
9
Is the adapter attached to the correct position of the PROM  
programmer?  
Programming adapter  
Is the MCU attached to the correct position?  
Is the area specification set correctly?  
Is the correct device selected?  
10  
11  
11  
PROM programmer  
Contact failure  
The IC socket of the PROM programmer may be stained. The  
socket needs replacing.  
-
7.1.2 Previously Written Normally  
Remedy  
Cause  
See page  
9
Is the adapter attached to the correct position of the PROM  
programmer?  
Programming adapter  
PROM programmer  
Is the MCU attached to the correct position?  
Is the area specification set correctly?  
Is the correct device selected?  
10  
11  
11  
The IC socket of the PROM programmer may be stained. The  
socket needs replacing.  
-
-
Contact failure  
The PROM programmer connector at which the PROM  
programmer is contacted may be stained. Clean it with  
alcohol, etc.  
( 14 / 18 )  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7.2 MCUs Do Not Function Normally  
The program operates normally on the emulator, but when the MCU that has normally been written  
is attached the same program does not function normally.  
(1) Is the offset address specified correctly when copying data into the PROM programmer?  
(2) In the emulator, NOPs are often inserted in the area where the program has not been read, therefore  
the program happens to appear functioning normally even though it may have gone wild. Check  
your program again.  
(3) The emulator and the actual MCU may differ in characteristics. Consult the user's manual of the  
emulation pod to check for differences in characteristics again.  
7.3 Other Precautions  
7.3.1 About the Recommended PROM Programmers  
Not all PROM programmers available on the market can be checked to see if they function properly.  
There are several PROM programmers that we have verified to function properly. These products are  
listed as recommended PROM programmers in this user's manual. Other PROM programmers may  
also be used providing that you verified them to function properly.  
Note: No matter which type of PROM programmer you use, it is necessary to verify completion of  
programming by executing screening, etc. that are stipulated for each MCU used.  
7.3.2 About Reading Out of Device Identification Code *1  
Please do not use the PROM programmer's device identification code readout function.  
Using this function may break down the MCU. The device identification code is included in EPROM  
to indicate the manufacturer code and device code; it is not included in the MCU.  
1
*
Depending on PROM programmer manufacturers, this may be referred to by another name (e.g.  
ID code).  
7.4 How to Request for Support  
After checking this manual, fill in the following information and email to your local distributor.  
For prompt response, please specify the following information:  
(1) Contact address  
• Company name  
• Department  
• Responsible person  
• Phone number  
• Fax number  
• E-mail address  
(2) Product information  
• Name of the programming adapter  
• Serial number  
• Date of purchase  
• Target MCU  
• Symptoms (Fails blank check/Cannot write a program/Fails verification etc.)  
• Detailed symptoms  
• How often does the problem occur? (2 out of 10 etc.)  
• When did the problem start to occur? (Since purchase/Used to work correctly)  
• Type name of the PROM programmer (Advantest R4945A etc.)  
• Specified device when writing to PROM (M27C101 etc.)  
• Specified programming area when writing to PROM  
• Switch settings of the adapter when writing to PROM  
( 15 / 18 )  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMO  
( 16 / 18 )  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PCA7427G02 User's Manual  
Rev.1.00  
September 1, 2003  
REJ10J0248-0100Z  
COPYRIGHT ©2003 RENESAS TECHNOLOGY CORPORATION  
AND RENESAS SOLUTIONS CORPORATION ALL RIGHTS RESERVED  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radio Shack Pager 17 9003 User Guide
RCA TV DVD Combo 24F500TDV User Guide
Ricoh Printer 400835 User Guide
Ryobi Trimmer HT920Dr User Guide
Samsung Camcorder WB700 User Guide
Samsung Microwave Oven SMH7178STE User Guide
Sanyo Projector PLV 60 User Guide
Sanyo Vacuum Cleaner SC 5006 User Guide
Schumacher Battery Charger INC 14825A User Guide
Sears Battery Charger 20071450 User Guide