Renesas Network Card M32171T PTC User Guide

M32171T-PTC  
Converter Board for M32171FxxFP (for In-circuit Connection)  
User’s Manual  
Keep safety first in your circuit designs!  
z Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products  
better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to  
personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with  
appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention  
against any malfunction or mishap.  
Notes regarding these materials  
z These materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited  
to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to  
Renesas Technology Corporation, Renesas Solutions Corporation or a third party.  
z Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, or infringement of  
any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application  
examples contained in these materials.  
z All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information  
on products at the time of publication of these materials, and are subject to change by Renesas Technology Corporation and  
Renesas Solutions Corporation without notice due to product improvements or other reasons. It is therefore recommended that  
customers contact Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product  
distributor for the latest product information before purchasing a product listed herein. The information described here may contain  
technical inaccuracies or typographical errors. Renesas Technology Corporation and Renesas Solutions Corporation assume no  
responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information  
published by Renesas Technology Corporation and Renesas Solutions Corporation by various means, including the Renesas home  
page (http://www.renesas.com).  
z When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and  
algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the  
information and products. Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any  
damage, liability or other loss resulting from the information contained herein.  
z Renesas Technology semiconductors are not designed or manufactured for use in a device or system that is used under  
circumstances in which human life is potentially at stake. Please contact Renesas Technology Corporation, Renesas Solutions  
Corporation or an authorized Renesas Technology product distributor when considering the use of a product contained herein for any  
specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.  
z The prior written approval of Renesas Technology Corporation and Renesas Solutions Corporation is necessary to reprint or  
reproduce in whole or in part these materials.  
z If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from  
the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport  
contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.  
z Please contact Renesas Technology Corporation or Renesas Solutions Corporation for further details on these materials or the  
products contained therein.  
Precautions to be taken when using this product  
z This product is a development supporting unit for use in your program development and evaluation stages. In mass-producing your  
program you have finished developing, be sure to make a judgment on your own risk that it can be put to practical use by performing  
integration test, evaluation, or some experiment else.  
z In no event shall Renesas Solutions Corporation be liable for any consequence arising from the use of this product.  
z Renesas Solutions Corporation strives to renovate or provide a workaround for product malfunction at some charge or without charge.  
However, this does not necessarily mean that Renesas Solutions Corporation guarantees the renovation or the provision under any  
circumstances.  
z This product has been developed by assuming its use for program development and evaluation in laboratories. Therefore, it does not  
fall under the application of Electrical Appliance and Material Safety Law and protection against electromagnetic interference when  
used in Japan.  
If the requirements shown in the "CAUTION" sentences are ignored,  
the equipment may cause personal injury or damage to the products.  
CAUTION  
Renesas Tools Homepage http://www.renesas.com/en/tools  
Rev.1.00  
August 1, 2003  
(1/4)  
REJ10J0210-0100Z  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Attaching Procedure  
How to attaching the M32171T-PTC is shown below. (see  
Figure 3)  
Interface cables of the probe  
(5)  
(1) Mount the NQPACK144SD on the foot pattern of the  
target system  
(4) Clock selection switch  
(2) Attach the YQPACK144SD to the NQPACK144SD.  
(3) Secure the four corners of the YQPACK144SD with the  
YQ-GUIDE’s.  
(4) Set the clock selection switch.  
EXT*1: The clock of pin XIN of the target board is  
supplied to the MCU on the M32171T-PTC.  
M32171T-PTC  
INT:  
The clock (10 MHz) on the M32171T-PTC is  
supplied to the MCU.  
(6)  
(5) Connect the SDI MCU control interface cable and the SDI  
trace interface cable of the emulator probe to the  
M32171T-PTC.  
YQ-GUIDE's (x4)  
(6) Attach the M32171T-PTC to the YQPACK144SD.  
(3)  
*1: When “EXT” is selected, take notice that the automatic  
oscillation does not occur. Connect the output of the  
oscillator to pin XIN.  
YQPACK144SD  
NQPACK144SD  
(2)  
(1)  
144-pin 0.5-mm-pitch  
(144P6Q-A) foot pattern  
: No. 1 pin position  
Be sure to align the pins.  
Figure 3 Attaching procedure of the M32171T-PTC  
6. External Dimensions and Sample Foot Pattern of the M32171T-PTC  
0. 25  
: No. 1 pin  
16. 0  
68. 0  
LES -KLC  
W1S  
TXE  
7. 0  
TN I  
M
A
D
E
M
3
2
1
7
0
T
P
T
C
A
0
I
N
.
J
6
f 3.2  
(For SL)  
A
P
A
N
-
6
0
0
0
7
.
.
R
E
V
A
.
3
9
2
1
.
3-f 1.0  
Hole for soldering NQ  
2J  
1J  
0. 5  
0
.
4
19. 0  
23. 0  
3
Figure 4 External dimensions and sample foot pattern of the M32171T-PTC  
(3/4)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. Precautions  
CAUTION  
Cautions for the emulator:  
z For debugging, be sure to use this product in a combination with the emulator M32100T2-SDI-E, M32170T-SDI or  
M32100T-SDI-E.  
z When starting up the PD32R, select an MCU file according to an MCU and operation mode. For selecting an MCU  
file, refer to the release notes of the debugger.  
z Connect both the SDI MCU control interface cable (10-conductor) and SDI trace interface cable (20-conductor) to  
the emulator.  
z For the precautions for a combination with an emulator, refer to the user’s manual of each emulator.  
Cautions for Differences Between the Emulator and an actual MCU:  
z The M32170F6VWG (768 KB of internal flash ROM and 40 KB of internal RAM) on the M32171T-PTC is used  
for debugging. Take care of differences of internal memory sizes.  
z When setting the clock selection switch to “EXT”, connect the clock generated by an oscillator of the target system  
to pin XIN. The automatic oscillation between XIN and XOUT does not occur.  
z Load capacity of all the signal lines of the MCU becomes greater than that of the actual signal lines on the MCU.  
Therefore, for a part where timing is critical, Give due consideration to its connection  
Cautions to Be Taken for This Product:  
z When attaching the YQPACK144SD, be sure to use the included YQ-GUIDE’s.  
IMPORTANT  
Notes on This Product:  
z We cannot accept any request for repair.  
z To purchase NQPACK144SD and HQPACK144SD, contact the following.  
z For inquiries about this product or the contents of this manual, contact your local distributor.  
(4/4)  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Q See Home Security System QT208 824 User Guide
Radica Games Games G71029 User Guide
Radio Shack TV Antenna U 120XR User Guide
RCA Car Video System 27V514T User Guide
Renesas Computer Hardware M30260T 48FPD User Guide
RIDGID Impact Driver R84230 User Guide
RTS Network Card UIO 256 User Guide
Samsung Flat Panel Television UN85HU8550 User Guide
Samsung Washer DC68 01518Q User Guide
Sears Drill 11321371 User Guide