next generation ceramic straightener
dries as it straightens
TM
Use and
Care Guide
The ultimate defense
against damage
S-8000i
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Features
(A) Steam vents and channels
(Bs Ceramic coating
(C) Ionic conditioning
(D) LCD display
pressed,the unit will turn itself off
when the LCD stops blinking.
Thank you for purchasing the
®
Remington wet2straight™
straigtener.This unique styler
combines optimum styling
features with cutting-edge
protection.Please carefully read
the instructions contained in
this booklet, and keep them in a
safe place for future reference.
Automatic worldwide voltage
This appliance contains a special electronic
circuit that automatically converts it for
worldwide usage– from 100 to 240 volts
AC,50 to 60 Hz.Just plug it into the local
outlet and use it as normal; the styler will
automatically adjust to the local current.
(You may need an adapter to allow the plug
to fit into the local outlets,however.)
*
*
(E) Steam icon
*
*
(F) Numerical heat setting indicator
(G) Graphic heat setting indicator
(H) +/- Temperature controls
(I) ON/OFF button
(J) Swivel cord
(K) Closing lock
(A)
*
*
*
*
*
(C)
(B)
Key Features
3X Protection:
*
3X Protection products from Remington®
have an exclusive Teflon® plus Ceramic
coating and Ions for the ultimate defense
against damage for superior shine.
Unique steam vent and channel design:
Unique steam vents and channels allow this
styler to be safely used on wet or dry hair.
The channels extract moisture from damp
hair and allow steam to escape through the
vents,drying hair and sealing the cuticle at
the same time.Creates salon straight,shiny
hair in less time,with less damage.
(D)
1. Teflon® coating:
(H)
(I)
Non-stick Teflon® coating glides through
any type of hair, preventing static,sticki-
ness, and build-up of mousses,gels,and
hair sprays for smooth,shiny results –
every time.
(E)
(F)
(G)
Display:
The Liquid Crystal Display (LCD) indicates
the heat setting numerically and with a
circle of bars. A steam icon appears when
you have selected a setting appropriate for
use on wet hair – settings of 16 and higher.
2.Ceramic coating:
Ceramic protects against damaging hot
spots with high,even heat to lock in
moisture and create long-lasting styles.
(J)
Automatic shutoff:
3.Ionic conditioning:
This styler is equipped with automatic
shutoff.This safety feature turns the unit off
after 60 minutes,in case you accidentally
leave it on after styling your hair. Before
turning itself off the LCD will flash for 10
seconds,giving you the chance to stop the
shutoff process.While the LCD is flashing,
simply press the +/- button to use the styler
for another 45 minutes. If no button is
Negative ions are created,neutralizing
positive ions to reduce static and the
frizzies, leaving your hair looking shiny
and healthy.
(K)
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Use
Usage Tips
6. Take a small section of hair and comb
Heat Settings
Locking Switch
Straightening Your Hair
1. Gently towel dry hair to remove excess
water. Avoid rubbing hair with a towel,
as this creates split ends and frizziness.
Detangle hair with a wide-toothed comb.
2. Plug the straightener into an electrical
outlet. Press and hold theON/OFFbutton
until the unit turns on and the LCD lights up.
3. The straightener will initially heat to
setting 15. Adjust the temperature
using the +/- buttons.The bars on the
LCD will flash while the unit heats up,
then glow steadily when it has reached
the selected temperature.The styler will
beep three times when it is ready for use.
4. Divide hair into manageable sections
and clip the upper layers on top of your
head and out of the way. Work with
underneath layers first.
5. Test the styler on a small section of hair,
then adjust the temperature up or down
before styling the rest of your hair.
NOTE:
■ If you find that you need a higher
setting while straightening your hair,
simply adjust the temperature by
pressing the "+" button. The unit
will beep when it reaches the new
temperature.
through it with a fine-toothed comb.
Pull hair down and away from your
scalp,and hold it taut.
Take extra care when using a professional
styler. To prevent hair damage,make sure
to use the correct temperature setting for
your hair type.
This professional straightener has a locking
switch to make the unit easier to store. To
lock,simply squeeze the plates together
and push the switch to the lock position. To
unlock,slide the switch to the unlock posi-
tion. NOTE:Do not heat the unit in the
locked position.
7. Hold the straightener with the LCD
and steam vents facing away from
your scalp. Starting at the roots, clamp
hair firmly between the plates and run
the styler down the entire hair strand,
from root to tip,in one smooth stroke.
Do not hold it in one area for a long
period of time or damage to hair may
occur.
8. To speed up drying at the roots,you
may wish to run the styler over the first
few inches of hair nearest the root sev-
eral times. Repeatedly run the unit
smoothly down the entire strand until
hair is fully dried. (NOTE: The unit
may make a steaming/hissing noise
when used on damp hair. This is
okay! The unique design of this
styler will channel the moisture away
from hair and out the steam vents.)
9. Repeat with all sections of your hair,
working with the underneath layers
first,then the top and sides,until hair
is fully dried.
Setting
Hair Type
A. 1-4
Dry Hair. Very fine,fragile
or damaged hair
B. 5-8
Dry Hair. Normal,easy to
straighten hair
C. 9-12
D. 13-16
E. 17-20
F. 21-25
G. 26-30
Dry Hair. Thick,difficult to
straighten hair
Damp Hair. Very fine,
fragile or damaged hair
Wet Hair. Normal,easy to
straighten hair
10. When you are finished styling,press
and hold theON/OFF button to turn the
unit off,unplug it,and allow it to cool
before storing.
■ While straightening your hair, if you
find that you need a lower setting,
adjust the temperature by pressing
the "-" button. Because the unit
is already hot,it may take a few
Wet Hair. Wavy or thick,
difficult to straighten hair
Wet Hair. Coarse,highly
resistant hair in good
condition
minutes to cool off.It will beep when
it cools to the lower temperature.
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and Troubleshooting
Performance Guarantee
120-240 VAC 50-60 Hz
Error Messages
Cleaning
Full Two-Year Warranty
Make sure the unit is unplugged and cool.
Use a damp cloth to clean the plates and
the outside of the power handle.No other
maintenance of the unit is required.
Rayovac Corporation warrants this product
against any defects that are due to faulty
material or workmanship for a two-year
period from the original date of consumer
purchase.This warranty does not include
damage to the product resulting from
accident or misuse.
rE
Questions or comments:
Call 800-736-4648 in U.S. or
800-268-0425 in Canada.
Your straightener will display an “rE”mes-
sage if it has a recoverable error or mal-
function.If this happens,turn the unit off,
unplug it,and allow it to cool for 10–15
minutes.Then plug it in and turn it on again.
If the message displays again,call
800-736-4648 in U.S.or 800-268-0425
in Canada.
Remington and wet2straight are trademarks
of Rayovac Corporation.
Teflon is a registered trademark of E.I.du Pont de
Nemours Company and is used under license by
Rayovac Corporation.
Storage
Unplug the unit whenever it is not in use.
Allow it to cool,then store it out of reach of
children in a safe,dry location.
If the product should become defective
within the warranty period,we will repair it
or elect to replace it free of charge.Please
call 800-736-4648 or 800-268-0425 in
Canada for details.
Patent Pending
Never wrap the cord around the appliance,
since this will cause the cord to wear
prematurely and break.Handle the cord
carefully and avoid jerking,twisting,or
straining it,especially at plug connections.
1E,2E,3E
If the LCD displays a “1E”,“2E”or “3E”
message,turn the unit off and unplug it.Do
not attempt to use it.Call 800-736-4648 in
U.S.or 800-268-0425 in Canada.
©2004 R.C.
6/04 Job# WPC04-038 Part#15706
RAYOVAC SHALL NOT BE
RESPONSIBLE FOR ANY INCIDENTAL,
SPECIAL OR CONSEQUENTIAL
DAMAGES.
Rayovac Corporation
800-736-4648
This warranty gives you specific legal rights
and you may also have other rights which
vary from state to state or province to
province.Some states do not allow the
exclusion or limitation of incidental,special
or consequential damages.
MADE IN CHINA
Rayovac Canada Ltd.
800-268-0425
Rayovac Money-back Offer
If within 30 days after you have purchased
your Remington® branded product,you are
not satisfied and would like a refund,return
it with the sales slip indicating purchase
price and date of purchase to the retailer
from whom it was purchased.Rayovac will
reimburse all retailers who accept the
product within 30 days from the date of
purchase.If you have any questions con-
cerning the money-back guarantee,please
call 800-736-4648 or 800-268-0425 in
Canada.
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
|