Remington Hair Dryer SSD 500 User Guide

®
®
MC  
TM  
Model SSD-500  
Please Read Prior to Use  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. This hair dryer is provided with an  
appliance leakage circuit interrupter  
(ALCI) safety device built into the plug.  
This device is designed to make the  
unit inoperable under some abnormal  
conditions, such as accidental immer-  
sion in water. The ALCI safety device  
is equipped with a test button so that  
its operation can be checked.  
2. Should the ALCI safety device trip (i.e., reset  
button pops out) during use, press the reset  
button. Should the dryer fail to reset, return  
the dryer to Remington Customer Service for  
examination and repair or replacement.  
Never operate this appliance if it has been  
dropped in water; return it to Remington  
Customer Service for examination and repair  
or replacement.  
This message about…  
Ground Fault Circuit  
Interrupters  
This unit should be tested before each  
use to confirm that the safety device is  
operational.  
3. The dryer is designed to work on ordinary  
household current only, 125 volts A.C.,  
60 Hz. It is not intended for commercial use.  
can save a life!  
If you must use your hair dryer in  
the bathroom, install a GFCI* now!  
4. This appliance is equipped with an automatic  
thermal limiter, which will cycle off when  
overheated and come back on when cooled  
down. If the unit cycles off, unplug the cord  
for several minutes before restarting.  
TO TEST:  
Your local electrician can help you decide which  
type is best for youa portable unit that plugs into  
the electrical outlet or a permanent unit installed  
by your electrician. The National Electrical Code  
now requires GFCIs in bathrooms, garages, and  
outdoor outlets of all new homes.  
After plugging in your hair dryer:  
A. Press the reset button on the  
ALCI device.  
B.Press the test button. The reset button  
will pop out. This verifies that the  
safety device is operating properly.  
5. This appliance has a polarized plug (one  
blade is wider than the other). As a safety  
feature, this plug will fit in a polarized outlet  
only one way. If the plug does not fit fully in  
the outlet, reverse the plug. If it still does not  
fit, contact a qualified electrician. Do not  
attempt to defeat this safety feature.  
Why do you need a GFCI?  
C.Press the reset button to reactivate  
your ALCI safety device.  
Electricity and water dont mix. If your hair dryer  
falls in water while its plugged in, the electric  
shock can kill youeven if the switch is off.”  
A regular fuse or circuit breaker wont protect  
you under these circumstances. A GFCI offers  
you greater protection.  
D.Your hair dryer is now ready for use.  
Note: This unit may automatically trip  
when unplugged. If so, unit must be  
reset after it is plugged in. After  
following the above testing procedure,  
should the indicator device not function  
properly, return the dryer to Remington  
Customer Service for examination and  
repair or replacement.  
A GFCI can save your life!  
Compared to that, the price is small!  
Don’t wait…  
install one now!  
*GFCI is a sensitive device which  
reacts immediately to a small electric  
current leak by stopping the electricity flow.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SuperSonicFeatures  
• stronger motor  
• more powerful fan design  
• larger air intake area  
• fast air concentrator  
• 5 ionic ports  
5x Ionic  
1875 Watts  
• ceramic radiant heat technology  
• full size design  
• 1875 watts  
• 3 heat settings  
• 2 speed settings  
• cool shot  
• easy-to-clean grille  
• 6-foot cord with hang loop  
Air Intake  
Grille  
External Ionic Ports  
3 Heats  
Cool Shot  
Helical Fan Design  
If you look down through the top of the dryer, you will  
2 Speeds  
see that the fan is not centered within the top grille area.  
This is not a cause for concern. This is a natural part of  
the design and it maximizes flow efficiency.  
Ceramic  
Coated Grille  
6-Foot Cord with  
Hang Loop  
SuperSonicDryer Technology  
Wet hair holds 90% of its moisture in its inner  
layer. Air that is too hot causes hair’s outer  
layer to seal shut – trapping water inside and  
slowing down the drying process.  
5 Ionic ports for more  
ionic conditioning  
Negative ions neutralize the positive ions  
that cause static and frizzies. Leaves hair  
shiny and healthy-looking.  
The SuperSonic dryer generates more airflow  
than other dryers so it can use less heat to dry  
hair more quickly. And less heat equals less  
hair damage.  
Ceramic Radiant Heat Technology  
Ceramic emits far-infrared, radiant heat to  
help dry water molecules inside the hair  
strand. This fast and efficient process helps  
prevent heat damage for less frizz and more  
shine.  
Fast Air Concentrator  
Exclusive vent design pulls in more  
air for faster precision styling.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
No matter what style you ultimately achieve with this  
dryer and a brush (your hairdresser may recommend  
a particular one), the first step is to remove most of  
the moisture from your hair. Start by blotting hair dry  
with a towel (rubbing creates tangles).  
COOL SHOT  
Once you fully dry your hair and fashion the style, press  
the Cool Shot button to setthe style.  
MAINTENANCE INSTRUCTIONS  
1. Do not attempt to repair the appliance yourself.  
Return to Remington Customer Service for repairs.  
BEGIN TO SHAPE  
With a wide-tooth comb, start at the nape of your  
neck and comb out small sections of hair at a time.  
Put the dryer on HIGH air speed and HIGH heat, and  
rotate nozzle quickly all over head, fluffing up hair  
with fingers. Starting at nape of neck and moving  
up, brush hair from scalp out to the ends, always  
following movement of brush with dryer (keep dryer  
8 inches from scalp). Then quickly do the same  
thing, starting from the front and sides of head down  
to the nape, brushing in the direction of your hair  
from scalp out to the ends.  
2. Keep all intake openings clear of dust accumulation.  
See Cleaning Instructionsbelow. No other  
maintenance or lubrication is required.  
3. If the cord becomes twisted due to use, periodically  
straighten it. Store appliance and cord where they will  
not be damaged. Do not wrap cord around dryer.  
CLEANING INSTRUCTIONS  
1. The dryer needs minimum maintenance to ensure the  
best performance and long life.  
2. The air filter should be cleaned regularly, since  
a dirty or clogged filter will impair the efficiency  
of the dryer.  
3. To clean air filter, make sure dryer is turned off and  
plug is pulled out of outlet. Use soft bristle brush or  
damp cloth to remove any particles that are lodged in  
the air grille top and bottom.  
Hair should now be damp and ready for styling.  
Adjust air speed and heat setting and you’re  
ready to style.  
HAIR TYPE  
RECOMMENDED SETTINGS  
STORAGE:  
Short and Curly  
Low Airflow  
High Airflow  
Low Airflow  
High Airflow  
Low Airflow  
High Airflow  
High Airflow  
Low Heat  
When not in use, unplug the unit. Allow it to cool, and store  
out of reach of children in a safe, dry location.  
Short and Sculptured  
Mid-Length and Sculptured  
Mid-Length and Sleek  
Mid-Length or Long and Curly  
Long and Sculptured  
Long and Sleek  
Low Heat  
Medium Heat  
Medium Heat  
High Heat  
High Heat  
High Heat  
Never wrap the cord around the appliance, as this will  
cause the cord to wear prematurely and break. Handle  
cord carefully, and avoid jerking, twisting, or straining it,  
especially at plug connections.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Full Two-Year Warranty  
Remington Products Company, L.L.C. warrants this product  
against any defects that are due to faulty material or work-  
manship for a two-year period from the original date of con-  
sumer purchase. This warranty does not include damage to  
the product resulting from accident or misuse.  
If the product should become defective within the warranty  
period, we will repair it or elect to replace it free of charge.  
We will return your product, transportation charges prepaid,  
provided it is delivered prepaid to: Remington Products  
Company, L.L.C. 60 Main Street, Bridgeport, CT 06604,  
Attention: Service Department. Include a letter indicating the  
reason for the return.  
REMINGTON SHALL NOT BE RESPONSIBLE FOR ANY  
INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES.  
This warranty gives you specific legal rights, and you may  
also have other rights that vary from state to state. Some  
states do not allow the exclusion or limitation of incidental,  
special or consequential damages.  
REMINGTON MONEY-BACK OFFER  
If within 30 days after you have purchased your Remington  
dryer, you are not satisfied and would like a refund, take the  
dryer and sales slip indicating purchase price and date of  
purchase to the retailer from whom the dryer was purchased.  
Remington will reimburse all retailers who accept this item  
within 30 days from date of purchase. If you have any  
questions concerning the money-back guarantee, please  
call 800-736-4648.  
125 VAC, 60Hz, 1875W  
This product is Listed by Underwriters  
Laboratories, Inc. and bears the mark.  
Questions or Comments: Please call 800-736-4648  
Remington Products Company, L.L.C.  
60 Main Street  
Bridgeport, CT 06604  
MADE IN CHINA  
Remington and SuperSonic are trademarks of Remington Products Company, L.L.C.  
©2003 R.P.C., L.L.C. Rev. 12/03 Job# WPCO3-081 Part# 12416  
Patents Pending  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radio Shack Cordless Telephone ET 1109 User Guide
Radio Shack Headphones 43 122 User Guide
RCA Universal Remote RCU600RS User Guide
Recoton Advent Scale EC Series User Guide
RedMax Edger HEZ2601F User Guide
Riccar Sewing Machine REC 5900 User Guide
Rotel Stereo Amplifier RB980BX User Guide
Ryobi Blower RY09800 User Guide
Ryobi Saw MS181 User Guide
Senco Nail Gun Nail Gun User Guide