®
Use and Care Guide
Extra
closeness
and comfort
shave after
shave!
Models: R-846,
R-950, R-960,
and R-970
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Features
Titanium MicroFlex®
(A) Head & cutter assembly
(B) On/off button
(C) Locking bar
(D) Low-battery indicator (red)
shows when shaver needs charging
(R-960/970 only)
(E) Green charging indicator
(F) Trimmer button
Shaver Parts
(A)
Congratulations on your purchase of a premium
Remington® shaver.
The Titanium MicroFlex® is the world’s first shaver with Titanium-coated blades.
Titanium-coated blades stay sharper longer, resulting in a close,comfortable shave,
time after time.
(G) Storage pouch
(H) Plastic head guard
(I) Cleaning brush
Which Model is Yours?
Indicator lights
Quick
Low-
Complete
LCD
Worldwide
voltage
(B)
(C)
Power system
charge
Rinseable charge Charging
gauge display
R-846 Rechargeable
R-950 Cord/cordless
R-960 Cord/cordless
R-970 Cord/cordless
X
X
X
X
X
X
X
X
Easy-View®trimmer
X
X
X
X
X
(D)
(E)
Indicator Lights
Quick Charge
Shavers with this feature can fully recharge
in 1 hour; 5 minutes provide these shavers
with enough charge for a single shave.
Charging
(F)
The charging indicator is a
green light that glows when
the shaver is charging or
fully charged.
R-
Worldwide Voltage
Most of Remington’s shavers
can be used almost any-
(G)
Charge + Low-charge
The low-charge indicator is
a red light that glows when
the shaver needs recharging.
You have approximately 5
minutes of shaving time left when the red
indicator first comes on.
where in the world.These
models feature worldwide
automatic dual voltage
conversion,providing AC current between
100-240 volts AC,50-60 Hz.Just plug it
in to the local outlet (you may need an
adapter plug) and use as usual. Your shaver
will convert automatically to the local
current requirements.
(C)
(B)
(H)
(I)
Complete battery gauge
The series of lights in the
complete battery gauge
(E)
displays the amount of
charge remaining,in 20%
increments.When only 20% of the charge
remains,the red recharge warning light
illuminates.
R-846
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Usage Tips
To trim
To shave
To Charge
Getting a Close,
To use the Easy-View®
■ Push the ON/OFF
button to activate
the shaver for
shaving.
Before using your shaver for the first time,
charge it for 24 hours.
Comfortable Shave
pop-up trimmer, simply
push the trimmer but-
ton up.The trimmer
will pop up for ready
Remington® shavers need no adjustments
to their heads or cutters before you shave.
The heads will automatically adjust to the
contours of your face.It is not necessary to
apply pressure while shaving,just let the
shaver glide lightly on your skin.This gentle
touch makes shaving easier and helps
avoid possible skin irritation.
■
Slide the ON / OFFbutton to the OFF
position.
■ Connect the cord to the shaver and
then to the electrical outlet.The
Charging Indicator light will glow green,
indicating your shaver is charging.
■ Your shaver cannot be overcharged,
so you can leave it plugged in and
charging between shaves.
■ Hold the shaver so
all the heads touch
your face together.
This allows the shaver to work the way
it was designed for the closest shave
and minimum wear. Avoid holding the
shaver at an angle so only one head
touches the skin.This could cause skin
irritation.
use.Hold the shaver
as shown in the illustration. To conserve
battery energy (on rechargeable shavers
only),it is recommended to use the trim-
mer only when needed for trimming.When
through using,push the trimmer button
downward to lock into the OFF position.
As with every shaver, your shave will
improve over time.So allow about three
weeks to develop an effective shaving style
and for your beard to adjust to the new
shaver. The adaptation period may take a
little longer if your skin is sensitive,or if you
alternate between shaving methods.
■ Use only the supplied cord.
■ The R-846 is designed for cordless
operation only. Plugging in the cord will
not provide the power to shave.
Trim sideburns
Simply touch the
edge of the trimmer
to the desired line
for neat, clean
■ Use short,circular
strokes.Use your
free hand to
stretch your skin.
This encourages
The R-846 and R-950 fully recharge in 16
hours.Quick Charge enables the R-960 and
R-970 to fully recharge in 1 hour.
It’s simple to get a great shave from your
new shaver. Here are a few tips:
sideburns.
Trim mustache
your whiskers to
Hold shaver at desired
trim line for a quick,
easy, professional
trim.The trimmer can
also be used to trim
the upper edge of your
mustache.
stand out,making
it easier for them
to enter the cutting chamber.
■ Always use a clean,dry shaver. Make
sure that the cutter head assembly is in
the locked position.
Once fully charged,your shaver will run up
to 40 minutes without a cord.
■ Never press hard.
Pressing only flat-
tens your whiskers,
which makes it
harder for them to
enter the cutting
chamber. It will
also wear out the
cutting surface more quickly.
■ Wait at least 15 minutes
Corded Operation
after getting up before
shaving,to ensure your
face is free of puffiness
that may be present
from sleeping.
The R-950/960/970 have a corded operation
feature that allows you to run the shaver
directly off the cord in cases when batteries
are low. Simply connect the cord to the
shaver and then to an electrical outlet. Turn
the shaver on and proceed to shave.
Note: Your shaver will not recharge during
corded operation,so after shaving,turn the
shaver off and leave it plugged in so it can
be recharged.
12
9
3
! Always keep the protective head guard on
the shaver head and keep the trimmer in
the OFF position when the shaver is not in
use.
6
■ Make sure your face is
clean and dry before
starting.
For an even better shave…
Remington® Pre-Shave Powder Stick (SP-
5) or the Pre-Shave Lotion with Aloe (SP-6)
can help maximize your shaver’s perform-
ance.Just rub either product over your
beard.Both absorb moisture and facial oils,
helping set up the hairs so they enter the
cutting chamber more easily. They make
shaving quicker and more comfortable.
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Maintenance
The replacement part for models R-846,
R-950,R-960,and R-970 is model
#SP-19.U.S.residents: To order, contact
us at 800-736-4648,visit us at
your local retailer.
Cleaning Your Shaver
When is it Time to Replace
Your Heads and Cutters?
It is very important to replace your heads
and cutters when necessary to ensure a
close,comfortable shave without irrita-
tion. We recommend they be replaced
every 12 months.Here are some signs of
head and cutter wear, indicating that
replacement is needed.
Illustration A
To assure smooth,efficent performance
it is important to clean your shaver.
Grip the head assembly by the three ridges
and pull it off the
Cutter retainer
assembly
shaver. Use the
cleaning brush to
sweep out the inter-
nal part of the head
assembly and the
Center
screw
knob
Canadian residents: For any shaver
accessory requirements,please call
800-268-6531 or visit us at
Locating holes
hair pocket area,
where 3 shaver spin-
dles are located.
Clean under the cut-
ter assembly at least
once a week. Open
the shaver head and
unscrew the center
screw knob to remove
the cutter retainer
assembly. Then simply
brush out the hairs
Irritation
Head/frame
assembly
As the heads get excessively worn you may
experience some skin irritation.This would
be especially noticeable when you apply
after-shave lotion.
Floating
cutter
heads
Pulling
Locating pins
When the cutters wear you may feel a sense
of pulling and a loss of closeness when you
shave.This is an indication that it is time to
replace your heads and cutters.
Your shaver is for dry operation only.
It is not waterproof.Do not immerse in
water.
and dust. After clean-
ing,replace the cutter
assembly.
Never clean the shaver or replace the
cutters while it is plugged into an
electrical outlet.
! Important: Make sure to align the two
locating holes in the Cutter Retainer
assembly with the pins in the Head Frame
Assembly. (See illustration A).Then tighten
center screw knob to lock the cutters
into place.
Replace head assembly on the shaver
simply by pushing it onto the shaver.
Cover shaver head with plastic headguard
between uses.When removing the head-
guard or placing it back onto the shaver,
do not apply pressure to floating cutter
surfaces,as you may damage them.
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Disposal
Performance Guarantee
Remington® Money-Back Offer
®
This warranty does not cover products
damaged by the following:
Accident,misuse,abuse or alteration of it
■ Servicing by unauthorized persons
■ Use with unauthorized accessories
■Connecting it to incorrect current and
voltage
Battery Removal
The EPA-certified RBRC
When your rechargeable shaver reaches
the end of its useful life,the batteries must
be removed from the shaver and be recy-
cled or disposed of properly in accordance
with your local and state requirements.
If within 30 days after you have purchased
your Remington® product,you are not sat-
isfied with it and would like a refund,just
return it,together with the sales receipt,to
the retailer from whom it was purchased.
Battery Recycling Seal on
■
the nickel-cadmium
(Ni-Cd) battery indicates
Remington Products
Company, L.L.C.is voluntarily participating
in an industry program to collect and
recycle these batteries at the end of their
useful life,when taken out of service in the
®
Remington will reimburse all retailers who
The following procedures should be
followed for battery removal:
■ Make sure your shaver is unplugged
from any outlets,so you
don’t risk an electrical
shock.
■ Remove the Head
Assembly by gently lifting
the assembly away from
the shaver.
■ Using a small Phillips
head screwdriver, remove
the screws from the
■ Any other conditions beyond our control
accept such appliances within 30 days
from date of purchase.If you have any
questions regarding this money-back guar-
antee,please call 800-736-4648 (in the
U.S.) or 888-277-6333 in Canada.
®
No responsibility, obligations,or liability is
assumed for the installation or maintenance
of this product.
United States or Canada.The RBRC pro-
gram provides a convenient alternative to
placing used Ni-Cd batteries into the trash
or the municipal waste stream,which may
be illegal in your area.Please call
REMINGTON SHALL NOT BE RESPONSIBLE
FOR ANY INCIDENTAL,SPECIAL OR
CONSEQUENTIAL DAMAGES RESULTING
FROM THE USE OF THIS PRODUCT. ALL
IMPLIED WARRANTIES INCLUDING BUT
NOT LIMITED TO IMPLIED WARRANTIES
OF FITNESS AND MERCHANTABILITY, ARE
LIMITED IN DURATION TO TWO YEARS
FROM DATE OF ORIGINAL PURCHASE.
Full Two-Year Warranty
Remington® warrants that this product is
free from defect in material and workman-
ship for two years after its original pur-
chase date—except for damage as speci-
fied below and these parts meant to be
replaced during regular maintenance:
800-8-BATTERYSM for information on Ni-Cd
battery recycling and disposal bans/restric-
tion in your area.Remington Products
Company, L.L.C.’s involvement in this
program is part of our commitment to
preserving our environment and conserving
our natural resources.
upper and lower back of
the shaver.
■ Rotary heads and cutter assembly
■ Pull or gently pry the
shaver halves apart,
exposing the battery.
■ Hold each battery in place
and very carefully slide
the clips from the termi-
nals on each battery.
If the product should become defective
within the warranty period,Remington® will
repair it or elect to replace it free of charge.
We will return your product,shipping
charges prepaid,if you do the following
within two years of the purchase date:
1.Return the complete product in person
or by mail,postage paid,to an
This warranty gives you specific legal
rights,and you may also have other rights
that vary from state to state.Some states
do not allow the exclusion or limitation of
incidental or consequential damages,or
limitations on how long an implied warranty
lasts,so the above limitations and exclu-
sions may not apply to you.
■ Lift or pry the battery out of the shaver.
authorized service dealer.
2.Include the original purchase receipt with
the product.
3.Include a description of the problem or
defect.
4.Do not return the product to the store
that sold it to you.
U.S.residents:
CAUTION:DO NOT PUT IN FIRE OR MUTI-
LATE YOUR BATTERIES WHEN DISPOSING
AS THEY MAY BURST OR RELEASE TOXIC
MATERIALS.DO NOT SHORT CIRCUIT AS IT
MAY CAUSE BURNS.DISPOSE PROPERLY IN
ACCORDANCE WITH YOUR LOCAL AND
STATE REQUIREMENTS.
To order shaver accessories contact
us at 800-736-4648,visit us at
visit your local retailer.
Canadian residents:
To order shaver accessories,please call
800-268-6531 or visit us at
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty Service
Remington,Easy-View, and MicroFlex are
trademarks of Remington Products
Company, L.L.C.
© 2004 R.P.C,L.L.C.Job# S03-140
1/04 Part No.14341
U.S. Patent:s 5,390,146; 5,408,749 and
Patents Pending; Canadian Patents:
D94,221;2,091,039;2,114,923;2,111,626
D100,892 and Patents Pending
Warranty Service
In the U.S. and Canada, service is provided
by authorized service dealers. For the
address of your nearest authorized service
dealer, contact us at 800-736-4648 (in U.S.),
888-277-6333 (in Canada), visit our website
your local Yellow Pages under “Shaver-
Electric-Repair.”U.S. customers may mail
the product, postpaid,with a copy of the
sales receipt and a letter explaining the
problem, to this address:
Remington Products Company, L.L.C.
60 Main St.
Bridgeport,CT 06604
Attention:Service Department
Remington Products Company, L.L.C.
In the U.S.call 800-736-4648
KEEP ORIGINAL SALES RECEIPT AS PROOF
OF PURCHASE FOR WARRANTY PURPOSES.
MADE IN CHINA
Questions or comments:
Remington Products Company, L.L.C.
In Canada call 888-277-6333
Call 800-736-4648 in U.S. or
888-277-6333 in Canada.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
|