|
ST8001
Smartpilot
Controller
Operating Guide
Document number: 81217-1
Date: July 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Information
iii
Important Information
About the documentation provided
Welcome to Raymarine SmartPilot. The autopilot system that will steer your
boat to a heading automatically, accurately, reliably and comfortably.
SmartPilot documentation is arranged so that you can install, commission
and quickly use your SmartPilot, keeping to hand only the information
necessary.
•
Installation Sheets - One per element of the system, these easy to under-
stand sheets guide you through the installation process. These can be dis-
carded once the installation is complete.
•
•
•
SmartPilot Commissioning Guide - Describes how to connect, com-
mission and configure the system.
Quick Start Guide - Once commissioned, use your Smart Pilot right
away with this handy guide to the main operations.
Operating Guide - This handbook. Contains a detailed description of
the SmartPilot’s features and functions.
Warranty
Toregister your new Raymarine product, please takea few minutes tofill out
the warranty card. It is important that you complete the owner information
and return the card to us to receive full warranty benefits.
Safety notices
WARNING: Calibration
We supply this product calibrated to default settings that should provide
initial stable performance for most boats. To ensure optimum performance
on your boat, you must complete the procedures in SmartPilot
Commissioning Guide before use.
WARNING: Navigation aid
Although we have designed this product to be accurate and reliable, many
factors can affect its performance. Asa result, it shouldonly beusedas anaid
to navigation and should never replace common sense and navigational
judgement. Always maintain a permanent watch so you can respond to
situations as they develop.
Download from Www.Somanuals.com. All Manuals Search And Download.
iv
ST8001+ Smartpilot Controller Operating Guide
Your Raymarine SmartPilot will add a new dimension to your boating
enjoyment. However, it is the skipper’s responsibility to ensure the safety of
the boat at all times by following these basic rules:
•
Ensure that someone is present at the helm AT ALL TIMES, to take man-
ual control in an emergency.
•
•
Makesurethat all membersofcrewknowhowtodisengagetheautopilot.
Regularly check for other boats and any obstaclesto navigation – no mat-
ter how clear the sea appears, a dangerous situation can develop rapidly.
•
•
Maintain an accurate record of the boat’s position by using either a navi-
gation aid or visual bearings.
Maintain a continuous plot of your boat’s position on a current chart.
Ensure that the locked autopilot heading will steer the boat clear of all
obstacles. Make proper allowance for tidal set – the autopilot cannot.
•
Even when your autopilot is locked onto the desired track using a naviga-
tionaid, alwaysmaintainalogandmakeregularpositionalplots. Naviga-
tionsignalscanproducesignificanterrorsundersomecircumstancesand
the autopilot will not be able to detect these errors.
EMC Conformance
All Raymarine equipment and accessories are designed to the best industry
standards for use in the recreational marine environment. Their design and
manufacture conforms to the appropriate Electromagnetic Compatibility
(EMC) standards, but correct installation is required to ensure that
performance is not compromised.
Handbook information
To the best of our knowledge, the information in this handbook was correct
when it went to press. However, Raymarine cannot accept liability for any
inaccuracies or omissions it may contain. In addition, our policy of
continuous product improvement may change specifications without notice.
As a result, Raymarine cannot accept liability for any differences between
the product and the handbook.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
v
Contents
Important Information ....................................................................................... iii
About the documentation provided .........................................................iii
Warranty ..................................................................................................iii
Safety notices ...........................................................................................iii
EMC Conformance .................................................................................iv
Handbook information ............................................................................iv
Chapter 1: SmartPilot Operation .......................................................................1
1.1 Introduction ...................................................................................... 1
1.2 Using the control unit ....................................................................... 3
Start-up mode ................................................................................... 3
Keypad functions ............................................................................. 3
What does the display tell me? ......................................................... 4
1.3 Using the SmartPilot to steer your boat ............................................ 5
How do I automatically steer to a heading? ...................................... 5
How do I return to hand steering? ..................................................... 5
How do I change course in Auto mode? ........................................... 6
Can I dodge an obstacle and then resume course? ............................ 6
Can I use the SmartPilot to power-steer my boat? ............................ 7
1.4 How do I adjust the performance of my SmartPilot? ....................... 8
Off Course warning ........................................................................ 10
1.5 Can I adjust the display lighting and contrast? ............................... 10
How do I adjust the lights? ............................................................. 10
How do I adjust the contrast? ......................................................... 11
Chapter 2: Advanced Operation .......................................................................13
2.1 How do I follow a route set on a Chartplotter? ............................... 13
How do I activate Track mode? ...................................................... 13
How do I leave Track mode? .......................................................... 14
What is Cross track error? .............................................................. 14
Tidal stream compensation ............................................................. 15
How do I dodge an obstacle in Track mode? .................................. 15
What happens when I arrive at a waypoint? ................................... 16
What happens when I get to the end of the route? ........................... 18
Safety in Track mode ...................................................................... 18
2.2 Using Wind Vane mode – sail boats ............................................... 18
What is Wind Vane mode? ............................................................. 18
How do I select Wind Vane mode? ................................................. 19
How do I leave Wind Vane mode? .................................................. 19
How do I adjust the locked wind angle ........................................... 20
How do I dodge an obstacle in Wind Vane mode? .......................... 20
Download from Www.Somanuals.com. All Manuals Search And Download.
vi
ST8001+ Smartpilot Controller Operating Guide
What is a Wind Shift warning? .......................................................20
Operating hints for Wind Vane mode .............................................21
2.3 How do I display boat data? ............................................................21
Can I display Waypoint names? .....................................................22
Warning messages ..........................................................................23
2.4 User Calibration Options ................................................................23
How do I access User Calibration settings? ....................................23
User Calibration pages ...................................................................24
Chapter 3: Fault Finding & Maintenance .........................................................27
3.1 Fault finding ...................................................................................27
SmartPilot alarm messages ............................................................28
3.2 General maintenance ......................................................................30
Routine checks ...............................................................................30
Cleaning the display .......................................................................30
EMC advice ....................................................................................30
Product support ..............................................................................31
Specifications .......................................................................................................33
ST8001 control unit ................................................................................33
SmartPilot computer functions ...............................................................33
Glossary .................................................................................................................34
Index ......................................................................................................................37
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1: SmartPilot Operation
1
Chapter 1: SmartPilot Operation
1.1 Introduction
The SmartPilot controller is a SeaTalk® compatible autopilot control unit. It
is designed as the main controller for the SmartPilot system.
The SmartPilot controller operates in the following modes:
•
•
•
Standby: SmartPilot off. You have manual control of the boat
Auto: The SmartPilot steers the boat to maintain a locked heading
Track: The SmartPilot steers the boat to maintain a track between two
waypoints created on a navigation aid
•
Wind Vane: The SmartPilot steers the boat to maintain a course relative
to a true or apparent wind angle
The SmartPilot controller also provides:
•
•
automatic tack (AutoTack) in Auto and Wind Vane modes
waypoint advance feature in Track mode
Download from Www.Somanuals.com. All Manuals Search And Download.
2
ST8001+ Smartpilot Controller Operating Guide
SmartPilot Functions
The functions provided with your SmartPilot system depend on whether the
SmartPilot computer contains an internal GyroPlus yaw sensor
:
S1G, S2G and S3G systems
(with GyroPlus)
Non-G systems
(without GyroPlus)
Internal GyroPlus yaw sensor provides
enhanced course keeping using AST
(Advanced Steering Technology)
Full basic functionality: uses Raymarine
steering algorithm without AST
Steering to true and apparent wind in
Wind Vane mode
Steering to true and apparent wind in
Wind Vane mode
Equipped with AutoLearn, Raymarine’s
self-learning calibration system
Extended systems
You can connect the SmartPilot controller to other Raymarine SeaTalk
equipment so it can send and receive SeaTalk data:
•
•
•
it can use waypoint information from a SeaTalk navigation instrument to
provide track control
it can use boat speed from a SeaTalk speed instrument to optimize track-
keeping performance
it can use wind information from a SeaTalk wind instrument for Wind
Vane steering
You can also use the SmartPilot with any navigator or wind instrument that
transmits National Marine Electronics Association (NMEA) 0183 data.
The SmartPilot control unit can display SeaTalk and NMEA instrument data
in a user-defined selection of data pages.
For further information on other connections to your system see SmartPilot
Commissioning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1: SmartPilot Operation
3
1.2 Using the control unit
Start-up mode
The SmartPilot alwayspowersupinStandbymode withthedisplay showing
the boat’s current compass heading.
Note: You can press standby at any time to return to manual steering.
Keypad functions
The SmartPilot is controlled using simple push-button and rotary control op-
erations, all of which are confirmed with a short beep. In addition to the main
single-key functions, there are several dual key operations.
disp
&
Press to scroll through
calibration parameters.
Press to adjust
Press to display
data pages
Press for 1 second
for lamp control
response and gain
rotary control
resp
Press to display response level
Press for 1 second for rudder gain
track
standby
Press for Standby mode
auto
Press for Auto mode
Press for Track mode from Auto mode
(if a navigator is connected)
Press to accept waypoint advance
Press for 1 second to skip waypoint
Press for 2 seconds
to enter Calibration mode
w v
Press to steer to a fixed wind angle
standby plus auto
Press for Wind Vane mode
(if a wind vane is connected)
res'm
Press to resume previous course
D6337-1
Download from Www.Somanuals.com. All Manuals Search And Download.
4
ST8001+ Smartpilot Controller Operating Guide
What does the display tell me?
The SmartPilot display screen provides the following information:
Autopilot mode indicators
GyroPlus indicator (appears if a
yaw sensor is connected to the autopilot)
Variable text area (up to 9 characters)
Distance units:
• no units = kilometres
• nm = nautical miles
• SM = statute miles
Heading indicators
Port and Starboard
direction-to-steer
indicators
Calibration mode indicator
(displayed on calibration pages)
Rudder position indicator
D5458-2
The bar graph at the bottom of the screen indicates the current position of the
rudder, as measured by the rudder position sensor.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1: SmartPilot Operation
5
1.3 Using the SmartPilot to steer your boat
How do I automatically steer to a heading?
1. Steady the boat on the required heading.
2. Press auto
TheSmartPilotisnowinAUTO modeandwillsteertothechosenheading,
shown on the display. This mode is often known as “point-and-shoot”.
D5515-2
CAUTION:
Automatic course control makes it easier to sail a boat, but it is NOT a
substitute for good seamanship. ALWAYS maintaina permanent watch
by the helm.
How do I return to hand steering?
Press standby to disengage the SmartPilot:
•
in STANDBY mode, you have manual control of the boat and the dis-
play shows the boat’s current compass heading.
D4209-3
Download from Www.Somanuals.com. All Manuals Search And Download.
6
ST8001+ Smartpilot Controller Operating Guide
How do I change course in Auto mode?
In Auto mode, use the rotary control change the locked heading. For exam-
ple: turn the rotary control anti-clockwise for a course change to port.
Port
Starboard
D6338-1
Can I dodge an obstacle and then resume course?
To avoid an obstacle when your boat is under autopilot control, you can
dodge the obstacle and then resume your previous course.
Obstacle
Original
course
Dodge
D6339-1
1. Select a course change in the appropriate direction. For example, turnthe
rotary control anti-clockwise for a dodge to port.
2. Whensafelyclearoftheobstacle,reversethepreviouscoursechange(for
example, turn the rotary control clockwise).
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1: SmartPilot Operation
7
Can I use the SmartPilot to power-steer my boat?
The SmartPilot has an inbuilt Power Steer feature. This gives you direct
control of the rudder via the rotary control, in place of the helm. This offers
huge benefits over conventional steering. You can set the rudder at a
particular angle and the autopilot drive system will keep the rudder at that
angle until commanded otherwise.
How do I activate power steering?
To activate Power Steer mode:
1. Press standby and auto together.
2. The display will show PWR STEER, indicating power steer mode is active.
PWR STEER
D6410-1
3. Use the rotary control to steer the boat. The rudder position is dis-
played in the bar at the bottom of the display.
D6411-1
How do I leave Power Steer mode?
To leave Power Steer mode either:
•
•
press standby to return to manual steering via the helm.
press auto to proceed on the current heading under autopilot control.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
ST8001+ Smartpilot Controller Operating Guide
1.4 How do I adjust the performance of my
SmartPilot?
The principal method of adjusting the performance of SmartPilot systems is
by changing the response level. This is the only user adjustment you should
need to make to your SmartPilot on a regular basis.
The response level controls the relationship between the SmartPilot’s course
keeping accuracy and the amount of helm/drive activity. When you turn on
your SmartPilot it will always be at the default level. (This level can be
adjusted in User Calibration see page 23)
When you require extra tight course keeping (e.g. for pilotage in confined
and sheltered waters), increase the setting. If you want to minimize drive
activity and conserve battery power, decrease the setting.
You can make temporary adjustments to the response level when using your
SmartPilot on a day-to-day basis. By doing this you can match performance
to conditions as they occur.
Note: You will lose these temporary changes to response level whenever the
system is powered off. You can make permanent adjustments in User Cali-
bration (See page 23). This determines the default power-up response level.
Adjusting performance – S1G, S2G and S3G systems
S1G, S2G and S3G systems systems have 9 levels of response:
•
level 9 to 7 give the tightest course keeping and greatest rudder activity
(and power consumption). This can lead to a rough passage in open
waters as the SmartPilot may ‘fight’ the sea.
•
•
levels6to4shouldgivegoodcoursekeepingwithcrisp,wellcontrolled
turns under normal operating conditions
level 3 to 1 minimizes the amount of pilot activity. This conserves
power, but may compromise short-term course-keeping accuracy
With these points in mind, you should use the following procedure to make
temporary adjustments to the response level when required:
1. Display the RESPONSE screen by pressingthe resp key momentarily.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1: SmartPilot Operation
9
Decrease
response
Increase
response
D5453-2
Note: The RESPONSE screen is set as a default data page (see SmartPilot
Commissioning Guide) so you can also access it by pressing disp and then
scrolling through the data pages.
2. Press the up or down arrow keysto change the response level.
3. Press disp or wait for 5 seconds to return to the previous display.
Adjusting performance – Non-G systems
Non-G SmartPilot systems have three different response levels:
•
Response Level 1: AutoSeastate on (Automatic deadband)
The SmartPilot will gradually ignore repetitive boat movements and
only react to true variations in course. This provides the best compro-
mise between power consumption and course keeping accuracy
•
•
Response Level 2: AutoSeastate off (Minimum deadband)
This setting provides tighter course keeping but will lead to increased
power consumption and drive unit activity
Response Level 3: AutoSeastate off + yaw damping
This setting provides the tightest possible course keeping by introducing
counter rudder yaw damping You can adjust the counter rudder setting in
Dealer Calibration (see SmartPilot Commissioning Guide)
To make a temporary change to the response setting:
1. Display the RESPONSE screen by pressing the resp key
2. Pressthe up arrow or down arrow keysto change the response between
levels 1 to 3.
3. Press disp or wait for 5 seconds to return to the previous display.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
ST8001+ Smartpilot Controller Operating Guide
Note: You will lose these temporary changes to response level whenever the
system is powered off. You can make permanent adjustments in User Cali-
bration (see page 23).
Off Course warning
= deviation to port
= deviation to starboard
D4229-3
The SmartPilot warns you when you have been off course from the locked
heading for longer than 20 seconds. It shows whether the deviation is to port
or starboard.
Note: The default off course angle is set at 20º. You can adjust this angle in
Dealer Calibration (see SmartPilot Commissioning Guide).
1. To cancel the off course warning, press standby to return to manual
steering.
2. Check whether your boat is carrying too much sail, or whether the sails
are badly balanced. You can usually significantly improve course keep-
ing by improving the sail balance.
Note: The SmartPilot also clears the warning if the heading recovers or if
you change course.
1.5 Can I adjust the display lighting and contrast?
How do I adjust the lights?
You can adjust the display and keypad lighting by:
1. Pressing dispfor 1 second from anymode to accessthe LAMP screen and
turn on the lights.
2. Press the disp key to cycle through the possible illumination settings:
LAMP 3 (the brightest setting), LAMP 2, LAMP 1, OFF, LAMP 1, LAMP 2,
LAMP 3 and so on:
•
as you change the setting, the illumination on any other SeaTalk
instruments or control units will also change
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1: SmartPilot Operation
11
1 second
D5517-2
3. The display automatically returns to the previous mode if you do not
press a key for 10 seconds:
•
if you press another mode key within 10 seconds you will select the
mode assigned to that key (for example: auto selects Auto mode,
standby selects Standby mode)
Notes: (1) You can also adjust the lighting level from any other SeaTalk
instrument or control unit.
(2) When you switch off the unit you lose any changes you have
made to the lighting level.
How do I adjust the contrast?
To set the contrast level for the ST8001 display:
1. With the autopilot in Standby mode, press the disp key for one second to
access the LAMP screen.
2. Press thedispkey forone secondagain, to displaythe CONTRAST screen.
3. Use the up and down arrow keys to set the required contrast level (from
1 to 15).
4. The display automatically returns to the previous mode if you do not
press a key for 10 seconds:
Note: if you press another mode key within 10 seconds you will select the
mode assigned to that key (for example: auto selects Auto mode, standby
selects Standby mode)
Download from Www.Somanuals.com. All Manuals Search And Download.
12
ST8001+ Smartpilot Controller Operating Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2: Advanced Operation
13
Chapter 2: Advanced Operation
2.1 How do I follow a route set on a Chartplotter?
By using TRACK mode, the SmartPilot can maintain a route between
waypoints created on a navigation system. It makes any course changes
necessary to keep your boat on course, automatically compensating for tidal
streams and leeway.
Track mode is only available if you have connected the SmartPilot to a suit-
able navigation system providing SeaTalk or NMEA information. (See
SmartPilot Commissioning Guide for connection details)
Your SmartPilot system can receive route information from:
•
•
a SeaTalk navigation instrument or chartplotter
a navigation system transmitting data in NMEA 0183 format.
How do I activate Track mode?
CAUTION:
When you enter Track mode, the SmartPilot will bring the boat onto the
track in a controlled way. The closer the boat is to the correct heading
andtrack, thequickeritwillsettletheboatontothenewcourse.Toavoid
an unexpected turn, approximately align the boat with the required
track before entering Track mode.
Starting with the SmartPilot in AUTO mode and your chartplotter following a
route.
1. Press track to enter Track mode.
2. Wait for the warning to sound.
The display will show the bearing to the next planned waypoint and the
direction in which the boat will turn to reach this waypoint.
3. If it is safe for the boat to turn onto the new course, press the track key:
•
•
the SmartPilot will turn the boat onto the new course.
the display shows the heading required to achieve the required track
Note: The closer the boat is to the correct heading and track when you press
track, the quicker the SmartPilot will bring the boat onto the new course. If
the boat is more than 0.3 nm from the track, the Large Cross Track Error
warning will sound (see page 14).
Download from Www.Somanuals.com. All Manuals Search And Download.
14
ST8001+ Smartpilot Controller Operating Guide
Automatic track acquisition
Waypoint at 270˚
Waypoint at 270˚
Current
heading
Previous
heading
From auto mode, press track to enter Track mode . . . . . . then press track again to turn boat to waypoint.
How do I leave Track mode?
You can leave Track mode at any time by:
•
•
pressing auto to return to Auto mode
pressing standby to steer manually in Standby mode
What is Cross track error?
Waypoint 2
Cross track error (XTE)
more than 0.3 nm
Actual route
Planned route
Waypoint 1
Cross track error (XTE) is the distance between the current position and a
planned route. The SmartPilot receives the cross track error information
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2: Advanced Operation
15
from the navigation equipment, anddisplays the XTE in nautical miles (nm),
statute miles (SM) or kilometres (km).
If the cross track error is greater than 0.3 nm, the SmartPilot will sound the
LargeCrossTrackErrorwarningandshowwhetheryouaretotheport (Pt)or
starboard (Stb) of the planned track.
Tidal stream compensation
Under most conditions, the SmartPilot will hold the selected track to within
0.05 nm (300 ft) or better. It takes account of the boat’s speed when
computing course changes to ensure optimum performance.
Waypoint 2
Boat's speed over ground
Tidal component
Boat's speed through water
Waypoint 1
D3261-3
How do I dodge an obstacle in Track mode?
In Track mode you still have full control from the keypad. You can make a
dodge maneuver by using the rotary control to select the desired course
change.
After you have avoided the hazard, you can cancel the dodge course change
by making an equal course change in the opposite direction.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
ST8001+ Smartpilot Controller Operating Guide
What happens when I arrive at a waypoint?
As the boat arrives at the target waypoint the chartplotter will select the next
target waypointandtransmit this tothe SmartPilot. Itwill thendetect thenew
target waypoint name, sound a Waypoint Advance warning and display the
Waypoint Advance (NEXT WPT) screen. This shows the new bearing to the
next waypoint and the direction the boat will turn to acquire the new track.
Waypoint arrival and advance
Next target
waypoint at 270˚
New target
waypoint at 270˚
Target
waypoint
Old target
waypoint
Waypoint arrival
Waypoint advance
D5446-2P
How do I get to the next waypoint in a route?
When the Waypoint Advance warning sounds, the SmartPilot suspends
Track mode and maintains the current boat heading.To advance to the next
waypoint:
1. Check that it is safe to turn onto the new track.
2. Press the trackkey. Thiswillcancel theWaypoint Advance warningand
turn the boat towards the next waypoint.
Note: If you do not press track to accept the Waypoint Advance, the Smart-
Pilot will maintain the current heading and continue sounding the warning.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2: Advanced Operation
17
How do I skip a waypoint? (SeaTalk chartplotters)
If you want to advance to the next waypoint before you have arrived at the
targetwaypoint, youcanskipawaypointbypressingtrackfor1second. The
display will then show the Waypoint Advance screen for the next waypoint.
Check it is safe to turn, then press track to turn the boat towards the next
waypoint.
WARNING:
Skipping a waypoint will take you straight to the next waypoint. Check
your navigation before making the turn.
What is the Waypoint Advance warning?
The SmartPilot activates the Waypoint Advance warning (NEXT WPT?) in
Track mode whenever the target waypoint name changes. This occurs when:
•
•
you select automatic acquisition by pressing track from Auto
you request waypoint advance by pressing track for 1 second in Track
mode (with SeaTalk navigators only)
•
•
the boat arrives at the target and the navigator accepts the next waypoint
you activate the Man Overboard (MOB) function (see page 23)
When the warning sounds, the SmartPilot continues on its current heading
but displays:
•
•
the bearing to the next waypoint
the direction the boat will turn to take up that bearing
How do I respond to a Waypoint Advance warning?
To respond to a Waypoint Advance warning:
•
check that it is safe to turn onto the new track, then press track to accept
the waypoint advance
•
alternatively, youcancancel thewarningwithoutacceptingthewaypoint
advance by pressing:
•
•
auto to continue on the same heading, or
standby to return to manual control
Download from Www.Somanuals.com. All Manuals Search And Download.
18
ST8001+ Smartpilot Controller Operating Guide
What happens when I get to the end of the route?
The SmartPilot displays the ROUTE COMPLETED warning when you have
reached the last waypoint on a route in Track mode.
•
•
press auto to continue on the same heading
or press standby to return to manual control
Safety in Track mode
CAUTION:
Track mode provides accurate track keeping even in complex
navigational situations. However, it is still the skipper’s responsibility to
ensurethesafetyoftheirboatatalltimesthroughcarefulnavigationand
frequent position checks. Track mode assists precise navigation and
removes the tasks of compensating for wind and tidal drift. However,
you MUST still maintain an accurate log with regular plots.
2.2 Using Wind Vane mode – sail boats
Note: You can only select Wind Vane mode if the SmartPilot is receiving
suitable SeaTalk or NMEA wind direction information.
What is Wind Vane mode?
When the SmartPilot is in Wind Vane mode it uses the fluxgate compass as
the primaryheading reference. As changes in the true or apparent wind angle
occur, it adjusts the locked heading to maintain the original wind angle.
Wind information
Touse WindVane mode, the SmartPilot must receivewindinformation from
one of the following sources:
•
•
•
SeaTalk wind instrument connected to the autopilot via SeaTalk
NMEA wind instrument
Raymarine pushpit wind vane connected via a SeaTalk interface
True and apparent wind
SmartPilots can maintain a course relative to either an apparent or true wind
angle in Wind Vane mode
The default setting is apparent wind. If required, you can change this to true
wind in User Calibration (see page 24).
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2: Advanced Operation
19
WindTrim
In WindVane mode the SmartPilot uses WindTrim toeliminate the effects of
turbulence andshort term wind variations. This provides smoothand precise
performance with minimal power consumption. You can adjust the wind
response (WindTrim) level in User Calibration (see page 24) to control how
quickly the SmartPilot responds to changes in the wind direction. Higher
wind trim settings will result in a pilot that is more responsive to wind
changes.
How do I select Wind Vane mode?
You can select Wind Vane mode from either Standby or Auto mode:
1. Steady the boat onto the required wind angle.
2. Press w v to select Wind Vane mode and lock the current wind angle:
•
the display shows the locked heading (e.g. 128°) and the wind angle
(e.g.WIND 145P indicates an wind angle of 145° to port)
•
if the SmartPilot does not enter Wind Vane mode, it is not receiving
wind data - check the instrument and connections
w v
D6384-1
3. In Wind Vane mode, the SmartPilot will then adjust the boat’s heading to
maintain the locked wind angle.
How do I leave Wind Vane mode?
You can leave Wind Vane mode by:
•
•
pressing auto to return to Auto mode
pressing standby to return to manual control
Download from Www.Somanuals.com. All Manuals Search And Download.
20
ST8001+ Smartpilot Controller Operating Guide
How do I adjust the locked wind angle
You can adjust the lockedwindangleby using therotary controltochange
course. For example, to bear away when the boat is on a starboard tack:
•
turn the rotary control anti-clockwise– the locked wind angle and
locked heading will both change
•
the autopilot will then adjust the locked heading as required to maintain
the new wind angle
Note: Becauseturningtheboat affectsthe relationshipbetweenthe true and
apparent wind angles, you should only use this method to make minor ad-
justments to the wind angle. For major changes, return to Standby mode,
steer onto the new heading, then reselect Wind Vane mode.
How do I dodge an obstacle in Wind Vane mode?
In Wind Vane mode you still have full control from the keypad. You can
make a dodge maneuver by using the rotary control to select the desired
course change.
After you have avoided the hazard, you can cancel the dodge course change
by making an equal course change in the opposite direction.
What is a Wind Shift warning?
If the autopilot detects a wind shift of more than 15° it will sound the wind
shift warning and display the WIND SHIFT message:
•
To cancel the warning, and retain the existing wind angle and new head-
ing, press standby and auto together.
•
Alternatively, to cancel the warning and return to the previous heading:
•
•
adjust the locked wind angle using the rotary control.
press standby to return to hand steering, steer onto the required
heading, and press standby and auto together to return to Wind
Vane mode with the new wind angle
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2: Advanced Operation
21
AutoTack - Port
AutoTack - Starboard
Wind
Wind
AutoTack
angle
AutoTack
angle
D5399-2
Operating hints for Wind Vane mode
•
Always trim your sails carefully to minimize the amount of standing
helm.
•
•
Reef the headsail and mainsail a little early rather than too late.
InWindVanemodetheSmartPilotwillreacttolong-termwindshifts,but
will not correct for short-term changes such as gusts.
•
In gusty and unsteady inshore conditions, it is best to sail a few degrees
further off the wind so that changes in wind direction can be tolerated.
2.3 How do I display boat data?
Use the disp key to show ‘data pages’ of SeaTalk or NMEA data:
1. Pressdisptoaccessthefirstdatapage, andpressitagaintocyclethrough
each data page in turn:
•
•
when you cycle past the last data page, the display returns to the cur-
rent SmartPilot mode screen (for example, AUTO)
4 data pages are set in the factory as a default (see diagram): within
User setup you can select up to pages and control the information
they display (see page 23)
Notes: (1) If the SmartPilot system cannot obtain the required informa-
tion, the data page will show dashes instead of a value.
(2) The direction-to-steer arrows relate to the data page
information.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
ST8001+ Smartpilot Controller Operating Guide
(3) Most data pages show repeated data so you cannot adjust
them: the exceptions are the RESPONSE and RUDDER GAIN data
pages, which you can adjust using the up/down arrow keys
Default data pages
Data page 4
Data page 3
Data page 1
Data page 2
Autopilot mode
Press for 1 sec to
return to previous
data page
D5456-2
Can I display Waypoint names?
Ifthewaypointshavebeengivennames, theST8001willdisplaythemonthe
Cross Track Error (XTE), Bearing To Waypoint (BTW) and Distance To
Waypoint (DTW) data pages:
•
•
•
waypoint names of five characters or less are displayed together with the
page name (as shown by screen A below)
waypoint names of more than five characters alternate with the page
name (as shown by screen B below)
if the waypoint name has more than nine characters, the display only
shows the first nine characters
A
B
D4326-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2: Advanced Operation
23
Warning messages
Shallow warning (SHALLOW)
The SmartPilot shows the Shallow warning if it receives a shallow depth
message from an instrument on the SeaTalk system. Press standby or disp
to cancel the warning.
Man Overboard warning (MOB)
The SmartPilot activates the Man Overboard warning if it receives a man
overboard (MOB) message from another instrument on the SeaTalk system.
It displays the text MOB insteadof the waypoint number for the XTE, DTW and
BTW data pages.
2.4 User Calibration Options
The calibration information in this handbook relates to only those settings
that can be adjusted during normal operation (USER CAL). For information on
all available calibration settings, see SmartPilot Commissioning Guide.
Note: Many of the settings are sailboat specific and will only be displayed if
your vessel type is set to SAILBOAT
How do I access User Calibration settings?
You can only access the calibration mode from Standby mode:
1. With the SmartPilot in Standby mode, press and hold the standby key
for 2 seconds. The display will change to show DISPLAY CAL.
2. Press the disp key once, the display will now show USER CAL.
3. Press auto to enter User Calibration.
The first page of User Calibration will now be displayed.
4. To access other User Calibration pages, press disp to scroll down
through the items within that grouping:
5. When you reach an item you wish to adjust, use the rotary control to
change the value.
6. When you have made all the changes you want to make, press and hold
standby for two seconds to exit calibration mode and save changes.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
ST8001+ Smartpilot Controller Operating Guide
User Calibration pages
AutoTack angle (SAILBOAT only)
This calibration setting has no effect on ST8001 systems
Gybe inhibit (SAILBOAT only)
This calibration setting has no effect on ST8001 systems
Wind selection (SAILBOAT only)
This screen determines whether the boat steers to apparent or true wind in
Wind Vane mode.
Options
WIND APP (Default)
WIND TRUE
SmartPilot steers to apparent wind angle
SmartPilot steers to true wind angle
WindTrim (SAILBOAT only)
WindTrim controls how quickly the SmartPilot responds to changes in the
wind direction. Higher wind trim settings will result in a system that is more
responsive to wind changes.
Screen Text
Options
WIND TRIM
Range = 1 to 9
1 to 3 - Least responsive to wind changes (less system activ-
ity)
4 to 6 - Moderate response to wind changes
7 to 9 - Most responsive to wind changes (moresystem activ-
ity)
Response level
This sets the default SmartPilot response level setting. The response level
controlstherelationshipbetweencoursekeepingaccuracyandtheamountof
helm/drive activity. You can make temporary changes to response during
normal operation (see page 8).
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2: Advanced Operation
S1G, S2G and S3G systems
25
Screen Text
Options
RESPONSE
Range = 1 to 9
levels 9 to 7 gives the tightest course keeping and greatest
rudder activity (and power consumption). This can lead to a
rough passage in open waters as the SmartPilot may ‘fight’
the sea.
levels 6to 4 should give good course keeping with crisp,
well controlled turns under normal operating conditions
levels 3to 1 minimizes the amountofpilotactivity. This con-
serves power, but may compromise short-term course-keep-
ing accuracy
Non-G SmartPilot systems
Screen Text
Options
RESPONSE 1
AutoSeastate on (Automatic deadband)
The SmartPilot will gradually ignore repetitive boat move-
mentsandonlyreacttotruevariationsincourse.Thisprovides
the best compromise between power consumption and
course keeping accuracy
RESPONSE 2
RESPONSE 3
AutoSeastate off (minimum deadband)
This setting provides tighter course keeping but will lead to
increased power consumption and drive unit activity
AutoSeastate off + counter rudder yaw damping
This setting provides the tightest possible course keeping by
introducing counter rudder yaw damping
Download from Www.Somanuals.com. All Manuals Search And Download.
26
ST8001+ Smartpilot Controller Operating Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3: Fault Finding & Maintenance
27
Chapter 3: Fault Finding & Maintenance
All Raymarine products are designed to provide many years of trouble-free
operation. We also put them through comprehensive testing and quality
assurance procedures before shipping.
This chapter provides information about identifying problems, interpreting
alarm messages, maintaining your SmartPilot and obtaining product
support.
If a fault occurs with your SmartPilot, use the fault finding tables in this
section to help identify the problem and provide a solution.If you cannot
resolve the problem yourself, refer to the product support information.
3.1 Fault finding
SYMPTOM
POSSIBLE CAUSE and SOLUTION
Display is blank
No power – check the power and SeaTalk fuses on
course computer, then check main fuse/circuit breaker.
Data page display shows sta-
tionary dashes
The control unit is not receiving necessary data from
other instruments – check cabling.
Display shows rotating dashes Compass calibration in progress (see SmartPilot Com-
missioning Guide).
Displayed compass heading
You have not calibrated the compass. Carry out the devi-
does not agree with the boat’s ation and alignment procedures (see SmartPilot Com-
compass
missioning Guide).
No display bar on the display
Rudder bar switched off in Display Calibration – select
RUDD BAR or STEER BAR
Rudder bar display moves in
opposite direction to rudder
Reverse the red and green rudder position sensor con-
nections at the course computer
Boat turns slowly and takes a
Rudder gain too low. Complete AutoLearn or increase
long time to come onto course gain setting.
Boat overshoots when turning Rudder gain too high. Complete AutoLearn or decrease
onto a new course
gain setting.
The SmartPilot ‘hunts’ when
trying to position the rudder
Adjust the RUDD DAMP setting (see SmartPilot Commis-
sioning Guide). Increase the damping one levelat a time
until the autopilot stops hunting, and always use the
lowest acceptable value
Download from Www.Somanuals.com. All Manuals Search And Download.
28
ST8001+ Smartpilot Controller Operating Guide
SYMPTOM
POSSIBLE CAUSE and SOLUTION
The SmartPilot appears to be
Northerly/Southerly heading correction (AutoAdapt) is
unstable on Northerly headings not set up (see SmartPilot Commissioning Guide). [Does
in the Northern hemisphere (or not apply to S1G, S2G and S3G systems.]
Southerly headings in the
Southern hemisphere)
You cannot enter Seatrial Cali- Seatrial calibration lock is on – turn off the calibration
bration
protection feature in Dealer Calibration (see SmartPilot
Commissioning Guide).
The SmartPilot will not ‘talk’ to Cabling problem – make sure all the cables are con-
other SeaTalk instruments
nected properly.
Position information not
received
Navigator not transmitting the correct position data.
The SmartPilot will not auto
advance to the next waypoint
No bearing to waypoint information received from the
navigator.
Non-Raymarine 24V autopilots Check that the clutch fuse is in the correct position. E.g.
clutch slipping 24 V position for 24 V clutches.
When holding a constant course The Autopilot is connected to a Raymarine Pathfinder
in STANDBY mode, the heading unit with the “Bridge NMEA Heading” option switched
continuously changes
on. Disable this feature on the Pathfinder unit.
SmartPilot alarm messages
When the SmartPilot detects a fault or failure on the system, it will activate
one of the alarm messages listed in the following table.
•
•
Unless otherwise stated, you should respond to the alarm by pressing
standby to clear the alarm and return to manual control, before you
attempt to resolve the problem.
In some situations, the SmartPilot will raise more than one alarm. When
you have dealt with the first alarm, it will display the next alarm.
ALARM MESSAGE
POSSIBLE CAUSE and SOLUTION
AUTO RELEASE
Possible fault with rudder position sensor – check connections.
OR
Stern(I/O)drivesonly–youhavetakenmanualcontrolofsteeringwith
AutoRelease on. The alarm cancels automatically after 10 seconds.
CURRENT LIMIT
Serious drive failure – the drive is taking too much current due to short-
circuit or jamming. Check the drive unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3: Fault Finding & Maintenance
29
ALARM MESSAGE
POSSIBLE CAUSE and SOLUTION
DRIVE STOPPED
The autopilot is unable to turn the rudder (this occurs if the weather
load on helm is too high, or if the rudder position sensor has passed
beyond the preset rudder limits or rudder end-stops).
Check drive and rudder position sensor.
LOW BATTERY
Supply voltage has dropped below acceptable limits.
To respond to a Low Battery alarm:
• press standby to clear the alarm and return to hand steering
• start the engine to recharge the battery
LRN FAIL 1, 2 or 4
AutoLearn not completed successfully.
Failure codes:
1 = AutoLearn has not been carried out (default setting)
2 = AutoLearn failed, usually due to manual interruption
4 = AutoLearn failed, probably due to drive or compass failure
Repeat the AutoLearn procedure.
MOT POW SWAPPED
NO DATA
Motor cables are connected to power terminals (and power cables are
connected to motor terminals) at course computer. Turn off power and
swap over connections.
Caused by any of the following situations:
• the compass is not connected
• the autopilot is in Wind Vane mode and it has not received wind
angle data for 30 seconds
• the autopilot is in Track mode and:
• the autopilot is not receiving SeaTalk navigation data, or
• the position sensor (GPS, Loran, Decca) is receiving a low strength
signal – this will clear when the signal improves
Check connections to the compass, wind instrument and navigator.
Note: The autopilot stops adjusting the heading as soon as it loses
data.
The controller is not receiving data from the SmartPilot computer.
Check connections and check course computer is switched on.
NO PILOT
RG FAIL
GyroPlus yaw sensor has failed:
• If you have a S1G, S2G or S3G course computer with internal
GyroPlus sensor – call a Raymarine service agent.
• If you have a Non-Gscourse computer with external GyroPlus yaw
sensor – check the sensor and connections, then call a Raymarine ser-
vice agent.
SeaTalk data problem on one of the SeaTalk lines – check connections.
SEATALK and FAIL 1 or 2
SEATALK and FAIL
The controlunitcannottransmitdatatothe SeaTalksystem. Makesure
all SeaTalk cables are connected properly.
Download from Www.Somanuals.com. All Manuals Search And Download.
30
ST8001+ Smartpilot Controller Operating Guide
3.2 General maintenance
Routine checks
CAUTION:
The SmartPilot computer and controller do not contain any user
serviceable parts. It should be serviced only by authorized Raymarine
service technician.
The SmartPilot computer does NOT contain user-serviceable parts. If you
removethemaincoveryouwillinvalidatethewarranty. Thecontrollerisalso
a sealed unit. As a result, user maintenance is limited to the following checks
•
•
make sure all cable connectors are firmly attached
examine for signs of wear or damage – replace any damaged cables
Note: Do not use chemical or abrasive materials to clean the SmartPilot
computer. If the case is dirty, wipe it with a clean, damp cloth.
Cleaning the display
CAUTION:
Take care when cleaning the display. Avoid wiping the display screen
with a dry cloth as this could scratch the screen coating. If necessary,
only use a mild detergent.
•
Never use chemical or abrasive materials to clean the controller. If it is
dirty, wipe it with a clean, damp cloth.
•
Incertainconditions, condensationmay appearinside thedisplay screen.
This will not harm the unit, and you can clear it by switching on the illu-
mination for a short time.
EMC advice
•
When powered up, all electrical equipment produces electromagnetic
fields. Thesecancauseadjacent pieces ofelectrical equipment tointeract
with one another, with a consequent adverse effect on operation.
•
To minimize these effects and enable you to get the best possible perfor-
mance from your Raymarine equipment, guidelines are given in the
installation instructions, to enable you to ensure minimum interaction
between different items of equipment, i.e. ensure optimum Electromag-
netic Compatibility (EMC).
•
Always report any EMC-related problems to your nearest Raymarine
dealer. We use such information to improve our quality standards.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3: Fault Finding & Maintenance
31
•
In some installations, it may not be possible to prevent the equipment
from being affected by external influences. In general this will not dam-
age the equipment but it can lead to spurious resetting action, or momen-
tarily may result in faulty operation.
Product support
Raymarine products are supported by a worldwide network of distributors
and Authorized Service Representatives. If you encounter any difficulties
with this product, please contact either your national distributor, service
representative, ortheRaymarineTechnicalServicesCallCenter. Refertothe
back cover or the Worldwide Distributor List for contact details.
Before you considerreturning the autopilot, make sure that the power supply
cableissoundandthatallconnectionsaretightandfreefromcorrosion.Ifthe
connections are secure, refer to the Fault Finding section in this chapter.
If you cannot trace orrectify thefault, contact your nearest Raymarinedealer
or Service Center, specifying:
•
the SmartPilot controller and SmartPilot computer serial numbers:
•
•
the controller serial number is printed on its rear cover
the computer serial number is printed under its connector cover
•
the controller and computer software version numbers
The following illustration shows how to display the software information:
•
press and hold standby for 4 seconds:
•
•
after 2 seconds you will see the DISPLAY CAL screen
then after another 2 seconds you see controller software version
•
•
press disp to display the computer software version
press disp again to display the total number of hours the SmartPilot has
been used in Auto mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
ST8001+ Smartpilot Controller Operating Guide
Software Information
4 seconds
1 second
1 second
Control unit
software version
Time autopilot
used in Auto
Course computer
software version
1 second
D5494-2
Product details table
For future reference, you may want to use this table to record serial and
software information for your SmartPilot:
Serial Number
Software Version
SmartPilot Controller
SmartPilot Computer
Hours Used
hours
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
33
Specifications
ST8001 control unit
Nominal supply voltage:
Operating voltage range:
Current consumption (in Standby mode)
Operating temperature:
Water protection:
12 V DC via SeaTalk
10 V to 15 V DC
50 mA (less than 120 mA with full lighting)
0 °C to +70 °C (32 °F to 158 °F)
waterproof to CFR46
Overall dimensions:
width
height
175 mm (6.9 in)
115 mm (4.53 in)
41 mm (1.62 in)
depth
Keypad:
9 button illuminated keypad
Liquid Crystal Display (LCD):
shows heading, locked course and navigational data, and up
to 15 data pages
LCD illumination:
Input connections:
Output connections:
CE approvals:
3 brightness levels + off; 15 contrast levels
SeaTalk (x2) and NMEA 0183
SeaTalk (x2)
conforms to: 89/336/EC (EMC), EN60945:1997
SmartPilot computer functions
SmartPilot computer
Controller
S1G, S2G and S3G systems
Non-G systems
ST8001
•Internal GyroPlus yaw sensor
•Enhanced course keeping using AST
•FastTrim
•Full access to AutoLearn, providing
automatic steering calibration
• Improved track-keeping
•Steers to true and apparent wind in Wind • Uses Raymarine steering algorithm
Vane mode
•Improved calibration access
• Full basic functionality
•Improved track-keeping
• Steers to true and apparent wind in Wind
Vane mode
• Improved calibration access, but without
AutoLearn
without AST
•No FastTrim
Download from Www.Somanuals.com. All Manuals Search And Download.
34
ST8001+ Smartpilot Controller Operating Guide
Glossary
Term
Meaning
AST
Advanced Steering Technology (AST) is Raymarine’s unique advanced steering
algorithm. It uses inputs from awide varietyof sensors to tune the autopilot’s oper-
ation to provide superior control of the boat in any condition.
AutoLearn
AutoTrim
Self-learning calibration feature available on S1G, S2G and S3G autopilot systems.
The AutoTrim setting determines the rate at which the autopilot applies ‘standing
helm’tocorrectfortrimchangescausedbyvaryingwindloads onthe sails orsuper-
structure.
AWG
CE
American Wire Gauge
Marked on Raymarine products that comply with defined European Community
standards
counter rudder
Counter rudder is the amount of rudder the autopilot applies to try to prevent the
boat from yawing off course. Higher counter rudder settings result in more rudder
being applied.
CR pump
DC
Constant Running hydraulic pump
Direct current
EMC
(Electromagnetic
Compatibility)
When powered up, all electricalequipment produces electromagneticfields. These
cancauseadjacentpieces ofelectricalequipmenttointeractwithoneanother, and
this can degrade their performance. By following the EMC guidelines in this hand-
book, you can minimize these effects by ensuring optimum Electromagnetic Com-
patibility (EMC) between equipment.
Fluxgate
GPS
Standard Raymarine compass supplied with course computer core pack
Global Positioning System
GyroPlus
Raymarine’s GyroPlus yaw sensor that measures the boat’s rate of turn. It is built
into the S1G, S2G and S3G course computers.
I/O drive
MOB
Inboard/Outboard or stern drive
Man overboard
nm
Nautical mile
NMEA
The NMEA (National Maritime Electronics Association) protocol is an internation-
ally accepted serial communication interface standard for sharing data between
electronic equipment. Raymarine products can share information with non-
SeaTalk equipment using the NMEA 0183 protocol.
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
35
Term
Meaning
response
The autopilot response level controls the relationship between course keeping
accuracy and the amount of helm/drive activity.
rudder gain
SeaTalk
Rudder gain is a measure of how much helm the autopilot will apply to correct
course errors. The higher the setting the more rudder will be applied.
SeaTalk is Raymarine’s proprietary communication system. It links the products to
provide a single, integrated system sharing power and data.
SeaTalk bus
This refers to the continuous SeaTalk system connecting together a series of Ray-
marine units.
SM
Statute (land) mile
VHF
Very High Frequency (radio)
WindTrim
WindTrim (wind response) controls how quickly the autopilot responds to changes
in the wind direction. Higher wind trim settings will result in a pilot that is more
responsive to wind changes.
XTE
Yaw
Cross track error
The boat’s rate of turn (°/sec)
Download from Www.Somanuals.com. All Manuals Search And Download.
36
ST8001+ Smartpilot Controller Operating Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
37
Index
Dodging obstacles
Auto mode 6
A
Alarms 28
Drive stopped alarm 29
AUTO RELEASE 28
CURRENT LIMIT 28
DRIVE STOPPED 29
LARGE XTE 14
LOW BATT 29
F
Fault finding 27
Following a route 13
G
LRN FAIL 29
MOB 23
Glossary 34-35
Gybe inhibit 10, 24
GyroPlus fail alarm 29
MOT POW SWAPPED 29
NEXT WPT 17
NO DATA 29
NO PILOT 29
OFF COURSE 10
RG FAIL 29
SEATALK FAIL 1 or 2 29
SEATALK/STLK FAIL 29
SHALLOW 23
K
Keypad functions 3
L
Learn fail alarm 29
Low battery alarm 29
M
WINDSHIFT 20
Maintenance 30
Man Overboard alarm 23
Motor boats
Power Steer 7
Motor/Power swapped alarm 29
Auto mode 5
AutoTack 10
Changing course 6
Dodging obstacles 6
Off course warning 10
AutoRelease
N
Alarm 28
Next WPT warning 17
No data alarm 29
No pilot alarm 29
AutoTack 10, 24
C
Contrast 11
Controller
Specifications 33
Course changes 6
O
Off course warning
Description 10
P
Cross track error
Explanation 14
LARGE XTE warning 14
Current limit alarm 28
Performance 8
Power steer 7
Preventing gybes 10
Product support 31
D
Data pages 21
Display
R
Response level 24
Contrast 11
RG fail alarm 29
Download from Www.Somanuals.com. All Manuals Search And Download.
38
Index
Rotary Control 3
Route completed 18
Adjusting 20
Wind type 24
Wind vane mode 18
Adjusting wind angle 20
Apparent wind 18
Enabling 19
S
Safety notices iii
Track mode 18
Sailboats
Operating hints 21
True wind 18
Wind shift warning 20
WindTrim 19
AutoTack 10
Preventing gybes 10
SeaTalk
SeaTalk fail 1 or 2 29
SeaTalk fail alarm 29
Service 31
WindTrim 19
Settings
AutoTack 24
Gybe inhibit 24
Response level 24
User calibration 23
Wind type 24
Shallow alarm 23
SmartPilot
Disengaging 5
Engaging 5
Functions 2, 33
Specifications 33
Standby Mode 5
T
Technical support 31
Track mode 13
Cross track error 14
Next waypoint 17
Route completed 18
Safety 18
Tidal compensation 15
Waypoint names 22
U
User Calibration 23
W
Waypoint
Advance 16
Arrival 16
Skipping 17
Wind angle
Download from Www.Somanuals.com. All Manuals Search And Download.
Worldwide Warranty
The Raymarine warranty terms and conditions as described below do not affect the customer's
statutory rights.
In order to ensure that the equipment continues to operate efficiently and reliably, we
recommend that the Owner's handbook be carefully read and particular, attention is paid to
advice on safe and correct operation and use of the product. We recommend that Raymarine
equipment, be installed by an approved Raymarine installer.
Product warranty
Raymarine warrants each new product to be of good materials and workmanship. Raymarine,
or it's approved agents, will repair or exchangeunder warranty any parts proven to be defective
in material or workmanship under normal use, for a period of 2 years (24 months) from date of
sale to end user, or 30 months from date of shipment from Raymarine - whichever expires first,
except as provided below.
Raymarine warranty covers the parts and labour associated with any warranty repair as
described above, provided that the unit is returned to Raymarine or one of it's approved agents.
Installed warranty
In addition to the Product warranty cover as described above, Raymarine will, except as
provided below, authorise onboard warranty service by the nearest Raymarine approved
service agent, subject to maximum mileage and travel times applicable, on products, where
proof of installation, or commission by Raymarine certified installers, can be shown
The installed warranty provides for onboard repair or exchange, by Raymarine or it's approved
service agents, for a period of 2 years (24 months):either from date of sale of the boat to the end
user - where the equipment has been installed by a Raymarine certified installer, or from
commissioning of the installation by a Raymarine certified installer, or 30 months from date of
shipment of the equipment from Raymarine - whichever expires first, except as provided
below.
Obtaining warranty service
In the event of warranty service being required, contact Raymarine Technical Support or the
nearestRaymarineapprovedserviceagent-afulllistoflocalserviceagentsareavailableonthe
A suitable proof of purchase, showing date, place of purchase and serial number must be made
available to Raymarine or approved service agent at the time of request for warranty service.
In cases where a Raymarine certified installer has not installed the product; i.e. Product
warranty, the affected unit must be returned to the local Raymarine approved service agent,
with a copy of proof of purchase and/or completed warranty card. Subject to the limitations
below, the unit will be repaired/replaced at no further cost and promptly returned to the user.
In cases where the equipment has been installed by a Raymarine certified installer, (boat
builder, installer dealer etc.) i.e. installed warranty, the nearest Raymarine approved service
agent should be contacted (subject to mileage & travel time restrictions) and onboard service
requested. Thewarrantycard, correctlycompletedandstampedbytheinstallingagent,mustbe
available as authorisation for onboard service.
Continued . . .
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty limitations
Raymarine warranty policy does not apply to equipment that has been subjected to accident,
abuse or misuse, shipping damage, alterations, corrosion, incorrect and/or non-authorised
service, or equipment on which the serial number has been altered, mutilated or removed.
Raymarine assumes no responsibility for damage incurred during installation or as a result of
improper installation.
This warranty does not cover routine system checkouts, alignment/calibration, sea-trials or
commissioning, unless required by replacement of part(s) in the area being aligned.
Raymarine does not warrant damage caused by or to other equipment, systems or components
occasioned by improper or unauthorised connection, or use, of the product.
A suitableproofof purchase, showing date, placeof purchase, and serialnumbermustbemade
available to Raymarine or approved service agent at the time of request for warranty service.
Consumableitems,including, butnotlimitedtofuses, batteries, drivebelts, radarmixerdiodes,
snap-in impeller carriers, impellers, impeller bearings, and impeller shaft are specifically
excluded from this warranty.
All costs associated withtransducer replacement, otherthan the cost ofthe transduceritself, are
specifically excluded from this warranty.
Overtime/premium labour portion of services outside of normal working hours is not covered
by this warranty.
Whenorifrepairsarenecessary,theseproductsmustbeforwardedtoaRaymarinefacilityoran
approved Raymarine service agent, at owner's expense.
Raymarine warranty does not cover any differences in material, colouring or size between
those alluded to in corporate advertising, literature or published on the Web, which are not
specifically objected to at the time of delivery.
Travel costs other than auto mileage, tolls and two (2) hours travel time, are specifically
excluded on all products. Travel costs, which are excluded from the coverage of this warranty,
include but are not limited to: taxi, launch fees, aircraft rental, subsistence, customs, shipping
and communication charges etc. Travel costs, mileage and time, in excess to that allowed must
have prior approval in writing.
TO THE EXTENT CONSISTENT WITH STATE AND FEDERAL LAW:
(1) RAYMARINE SHALL NOT BE LIABLE FOR ANY INCIDENTAL,
CONSEQUENTIAL OR SPECIAL (INCLUDING PUNITIVE OR MULTIPLE)
DAMAGES.
(2) THISWARRANTY ISSTRICTLY LIMITEDTOTHETERMS INDICATED HEREIN,
AND NO OTHER WARRANTIES OR REMEDIES SHALL BE BINDING ON
RAYMARINE INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
All Raymarine products sold or provided hereunder are merely aids to navigation. It is
the responsibility of the user to exercise discretion and proper navigational skill
independent of any Raymarine equipment.
Download from Www.Somanuals.com. All Manuals Search And Download.
Factory Service Centers
United States of America
UK, Europe, Middle East, Far East
Raymarine Inc
Raymarine Ltd
22 Cotton Road, Unit D
Nashua, NH 03063-4219, USA
Anchorage Park, Portsmouth
PO3 5TD, England
Telephone: +1 603 881 5200
Fax: +1 603 864 4756
Telephone: +44 (0)23 9269 3611
Fax: +44 (0)23 9269 4642
Sales & Order Services
Telephone: +1 800 539 5539 Ext. 2333 or
+1 603 881 5200 Ext. 2333
Customer Support
Telephone: +44 (0)23 9271 4713
Fax: +44 (0)23 9266 1228
Technical Support
Telephone: +1 800 539 5539 Ext. 2444 or
+1 603 881 5200 Ext. 2444
Product Repair Center
Telephone: +1 800 539 5539 Ext. 2118
Stick barcode label here
Purchased from
Dealer address
Purchase date
Installed by
Installation date
Commissioned by
Commissioning date
Owner’s name
Mailing address
This portion should be completed and retained by the owner.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|