Ratoc Systems Network Card CFU2 User Guide

USB Host CF Card  
CFU2  
User’s Guide  
Jan. 2007  
Rev. 1.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.Introduction  
The CFU2 is a USB1.1 Host CF card for use in CF Type II card enabled PDA.  
This User’s Guide describes how to install, use the CFU2. The information in  
the README file in the CD-ROM may include newer information. For the  
latest information, go to our home page.  
1-1. Features  
• Just insert the CFU2 into a CF slot and USB1.1 Host Interface  
will be available.  
• USB HID Driver and USB Mass Storage Class Driver are included.  
The drivers allow you to use USB keyboards, USB bar code readers,  
USB Flash disks, etc.  
• Power-saving design enables to run battery-driven PDAs for a long time.  
• Support both 3.3V and 5V operation.  
• CFU2 dongle cable is detachable from the CFU2 CF card.  
• RoHS compliant.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
1-2. Package Confirmation  
Check Package Contents:  
• CFU2 CF card  
• Cable  
• Software CD-ROM  
• Pull-out sticker  
• Quick Install Guide  
• Software Lisence Agreement  
NOTE  
If any of these items are missing, contact the supplier immediately.  
1-3. System Requirements and Restrictions  
OS  
• Pockert PC 2003, Pocket PC 2003SE, Windows Mobile 5  
Supported PDA  
Refer to our home page and check the latest information.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
NOTE  
1. Some applications which needs a lot CPU power like an MP3 player,  
data transfer rate may be getting slower or the peformance of the  
applications may be getting poor.  
2. To use the CFU2 on the PDA, PCMCIA Card or CF Type II slot is  
required. For a PCMCA Card slot, a CF Type II PCMCIA adapter is  
needed. The CF Type II Adapter PCMCIA adapter is not included in  
the package.  
1-4. USB Device Support  
• USB keyboard  
• USB bar code reader  
• USB Flash Disk  
• USB MO, ZIP  
• USB HUB  
For more information, refer to our web site  
NOTE  
1. The CFU2 can supply up to 100mA to USB bus. If the USB device  
needs power from USB bus over 100 mA, we have to use a self-powered  
USB hub.  
2. NTFS format is not supported by Windows Mobile.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
1-5. Before installation  
In order to pull CF Cards easily from the CF Card Slot, a pull-out sticker comes  
with the CFU2 package. If there is not an eject button for the CF card, use the  
sticker as follows.  
Serial # sticker  
Direction of insert  
Stick the pull-out sticker on the back  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
2. Installation  
Follow the instructions below to install drivers.  
1. Confirming a folder structure in the software CD-ROM (See 2-1).  
2. Connecting the PDA to the PC system with ActiveSync (See 2-2).  
3. Installing the CFU2 Host Driver (See 2-3).  
4. Installing the HID Driver, if the USB device is an HID(Human Interface  
Device) such as a USB keyboard, USB bar code reader, etc (See 2-4).  
5. Installing the Mass Storage driver, if the USB device is a mass storage  
devices such as an USB Flash Disk, USB MO (See 2-7).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
2-1. Confirming a folder structure  
Folder structure in the software CD-ROM is as follows:  
Manual  
CD-  
HostDriver  
MassStorageDriver  
HidDriver  
hx2410  
ROM  
hx4700  
J apanese  
English  
2-2. Connecting the PDA to the PC with ActiveSync  
For driver installation, ActiveSync is  
needed. The ActiveSync should come with  
the PDA.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
2-3. CFU2 Host Driver Set Up  
Install the CFU1U Host Driver first. Insert the software CD-ROM  
into a CD-ROM drive. execute setup.exe in the [HostDriver] folder. Following  
window will appear. Click [Yes] to install the driver.  
When the installation is completed, the following window will appear.  
Click [OK].  
Message on PC  
Message on PDA (Windows Mobile 5)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
2-4. CFU2 HID Driver Set Up  
In order to connect a HID (Human Interface Device) such as an USB keyboard,  
USB bar code reader, install the HID driver. Insert the software CD-ROM into  
a CD-ROM drive. Execute setup.exe in [HidDriver\English] folder. Following  
window will appear. Click [Yes] to install the driver. When the installation is  
completed, following window will appear. Click [OK]. You need to reset your  
PDA to take effect.  
Message on PC  
Message on PDA (Windows Mobile 5)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
2-5. CFU2 Mass Storage Driver Set Up  
In order to connect a mass storage device such as a USB Flash Disk, a USB  
MO, install the Mass Storage driver. Insert the software CD-ROM into a CD-  
ROM drive. Execute setup.exe in [MassStorageDriver] folder. Following win-  
dow will appear. Click [Yes] to install the driver. When the installation has  
completed, the following window will appear. Click [OK]. You need to reset  
your PDA to take effect.  
Message on PC  
Message on PDA (Windows Mobile 5)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
3. Uninstallation  
Follow the instructions below to uninstall  
drivers.  
1. Take the CFU2 card from the CF slot.  
2. On the PDA, go to [settings]-[System]-  
[Remove Programs]. (Windows Mobile 5)  
3. Select the driver to uninstall and click  
Remove button.  
4. Click Yes to uninstall the driver.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
4. Registration and Tech-Support  
3-1. How to Register  
We recommend to register yourself as our customer through our  
on-line registration. (http://www.ratocsystems.com/english/)  
3-2. Software Update and Support  
The latest software is subject to change for improvement or bug fix.You can  
download the latest version from our web site.  
3-3. Technical Support  
You can get a Tech support from RATOC at the following:  
Open 9:30AM-5:00PM(PST) Mon-Fri(except holidays)  
RATOC Systems International, Inc. Tech support  
Address: 2000 Wyatt Drive Suite 9  
Santa Clara, CA 95054, United States  
Phone : (408)986-9040 Fax : (408)986-9042  
Please include the following information:  
• Our product name, serial number, and product description  
• Host Computer Name, OS version, CD-ROM version  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
5. Specifications  
CFU2 USB1.1 Host CF Card  
Bus Interface : CF+ and CompactFlash Specifications Rev1.4  
USB Interface: USB 1.1 Host Port(12Mbps/1.5Mbps)  
Connector: USB1.1 series A(Female) x 1  
Max Bus Power: 100mA  
Power Consumption : 3.3V/5V  
34mA at 3.3V(without any device connected)  
27mA at 5V(without any device connected)  
Operating Requirements: Temperature 32 to 131°F(0 to 55°C)  
Relative Humidity 10 to 80%(non-condensing)  
Size: 1.68 in (42.8 mm) (W) x 1.43 in (36.4 mm) (D) x 0.19 in (4.9 mm) (H)  
Cable length: 3.93 in (10 cm)  
USB1.1 Host Driver  
Host Interface : Original Class  
Transfer Protocol : Control, Bulk, Interrupt transfer  
Mass Storage Driver  
Transfer Protocol : BOT(Bulk Only Transfer)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
Appendix  
Trademarks  
-Windows is a registered trademark of Microsoft Corporation.  
-Other brand and product names may be registered trademarks or trademarks of  
their respective holders.  
Regulatory Agency Notice  
FCC Compliance Statement  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part  
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in  
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not  
installed and used in accordance with the instructions, may cause harmful interference to radio communica-  
tions. However, there is no guarantee that interference will not occur in a particular installation. If this  
equipment does cause harmful interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the  
following measures:  
(1) Reorient or relocate the receiving antenna.  
(2) Increase the separation between the equipment and receiver.  
(3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
(4) Consult the dealer or an experienced radio/TV technician for help.  
Changes or modifications not expressly approved by the party responsible for compliance may result in this  
unit not complying with FCC Rules Part 15.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pyramid Car Audio Car Stereo System CDR81DFX User Guide
Radio Shack Electronic Keyboard LK1161E 1 User Guide
Rival Rice Cooker RC100 User Guide
Rosewill Switch RC 407 User Guide
Saitek Computer Keyboard Overlay Keyboard User Guide
Samsung Bluetooth Headset GH68 12483A User Guide
Samsung DVD Player DVD VR320 User Guide
Samsung Home Theater System HT TX250 User Guide
Sanyo Security Camera HD3300 User Guide
Schumacher Battery Charger SE 40225 User Guide