Step One
Base
Handset
Attach the Mounting Bracket
13-Number Memory
Big Button Phone
43-3261
Memory/Index Card —
Write down important
numbers for quick
reference. You can also
write in the names and/or
numbers stored in
memory.
1. Position the mounting
bracket as shown.
Coiled Handset Cord —
Connects handset to base.
2. Align the bracket tabs with
the slots on the phone’s
base.
Introduction
AC Adapter — For
Mounting
Bracket
amplified ringer volume,
connect the adapter’s
barrel plug to the phone’s
DC 9V jack. Connect the
other end to a standard
AC outlet. When the
adapter is connected, the
keypad lights when you lift
the handset.
Thank you for purchasing the RadioShack
13-Number Memory Big Button Phone. The
ringer volume and listening volume can be
adjusted using the included AC adapter and the
sliding VOLUME control. Up to 10 standard
phone numbers can be stored in memory, as well
as three emergency numbers (fire, police,
ambulance).
3. Snap the bracket into
place.
Long Line Cord
Short Line Cord
Step Two
Mount and Connect the Phone
On a Wall
Your telephone connects directly to a modular
telephone line jack. If your telephone wiring does
not have a modular jack, you can update the
wiring yourself using jacks and adapters
(available at your local RadioShack store), or
have the telephone company update the wiring
for you. You must use compatible modular jacks
that are compliant with Part 68 of FCC Rules and
the requirements adopted by the ACTA. The
telephone cord and modular plug provided is Part
68 compliant for connecting to the telephone
company network.
15
1. Drill two vertical holes 3 / inches apart.
FLASH — Press to answer an incoming call while
16
MEMORY — PressMEMORY, then
press the memory location number
to automatically dial from memory.
Or, press after entering a phone
number to store.
you are talking (if you have Call Waiting service).
Press again to return to the previous call. If you do not
have Call Waiting, pressing FLASH can disconnect
the current call.
Wall or
Wall Plate
Base
STORE — Press
STORE, then enter a
number to store in
memory. Press again
after you enter the phone
number to confirm.
REDIAL — Press to
automatically dial the last
phone number you
called.
2. Thread a screw (not supplied) into each hole,
3
letting the heads extend about / inch from the
LOUD — To adjust listening level,
press LOUD, and then slide VOLUME
to the desired listening level setting
during a call. When you hang up and
make or receive another call, you must
press LOUD again before adjusting
VOLUME.
16
HOLD — Press to place a call
on hold. HOLD lights. To
resume the call, press the
switchhook or lift the handset.
wall.
3. Fit the keyhole slots over the screw heads and
slide the phone downward to secure it.
What’s Included
On a Wall Plate
•
•
•
•
Telephone Base
Telephone Handset
Mounting Bracket
AC Adapter
•
•
•
•
Coiled Handset Cord
Long Line Cord
TONE PULSE — Slide to TONE or
Ring Indicator — Flashes when
an incoming call is received.
Fit the keyhole slots over the wall plate studs. Slide
the phone downward to secure it.
PULSE to select the desired dialing
mode (depends on you phone service).
Press * during a call to switch from
pulse to tone dialing.
Short Line Cord
Connections
Memory/Index Card
LINE Jack — Connect
1. Connect the coiled handset cord to the jacks on
the base and the handset.
WARNING: To reduce the risk of fire or shock hazard, do not expose this product to rain or
moisture.
line cord here.
CAUTION: TO REDUCE THE RISK OF
..CAUTION..
ELECTRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED PERSONNEL.
2. If your phone is mounted on the wall, connect
the long line cord to the phone’s LINE jack.
Connect the other end to a wall jack.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
DC 9V Jack — Connect
adapter here for amplified
ringer volume, and to
The lightning symbol is intended
to alert you to the presence of
The exclamation symbol is
intended to inform you that
important operating and
HI LO OFF RINGER —
Slide to the desired
setting to set the ringer
volume.
!
uninsulated dangerous voltage
within this product’s enclosure that might
be of sufficient magnitude to constitute a
risk of electric shock. Do not open the
product’s case.
maintenance instructions are
included in the literature
accompanying this product.
3. If your phone is mounted on a wall plate,
connect the short line cord to the phone’s LINE
jack. Connect the other end to a wall jack.
activate the lighted keypad.
Download from Www.Somanuals.com. All Manuals Search And Download.
|