A
20-423
Owner’s Manual
Please read before using this equipment.
Download from Www.Somanuals.com. All Manuals Search And Download.
ˆ Introduction
Duplicate Frequency Check
Thank you for purchasing the RadioShack
200-Channel VHF/AIR/UHF Desktop
—
automatically notifies you if you are about to
store a frequency you have already stored,
to help avoid wasting storage space.
Scanner. This scanner gives you direct
access to over 25,000 frequencies, including
those used by police and fire departments,
ambulance services, government agencies,
air, and amateur radio services. You can
select up to 200 channels to scan, and you
can change your selection at any time.
Direct Search
— lets you search for new
and unlisted frequencies starting from a
specified frequency.
Priority Channel
— lets you program a
frequency in the priority channel to be
scanned every 2 seconds so you do not miss
important calls.
The secret to your scanner's ability to scan
so many frequencies is its built-in
microprocessor. Your scanner also has
these special features:
Weather Band (WX) Key
— scans seven
preprogrammed weather frequencies to keep
you informed about current weather
conditions.
Four Service Banks
— let you search
preset frequencies in separate fire/police, air,
ham radio, and marine banks, to make it
easy to locate specific types of calls.
Weather Alert
— automatically sounds the
alarm tone to advise of hazardous weather
conditions when the scanner detects an alert
signal on the local NOAA weather channel.
Two-Second Scan Delay
— delays
scanning for 2 seconds before moving to
another channel, so you can hear more
replies.
Lock-Out Function
— lets you set your
scanner to skip over specified channels or
frequencies when scanning or searching.
Ten Channel-Storage Banks
— let you
store up to 20 channels in each of 10
different banks, to group channels so you
can more easily identify calls.
Liquid Crystal Display
— makes it easy to
view and change programming information
at any time.
20 Monitor Memories
— let you temporarily
save up to 20 frequencies you locate during
a search, so you can move selected
frequencies to channel storage later.
Display Backlight
easy to read in low light situations.
— makes the scanner
Supplied Telescoping Antenna
scanner receive strong local signals.
— lets the
Memory Backup
frequencies stored in memory for about 1
hour during a power loss.
— keeps the channel
External Antenna Terminal
— lets you
TM
TM
connect an external antenna (not supplied)
to the scanner.
HyperSearch
HyperScan
and
— let
you set the scanner to search at up to 50
steps per second and to scan at up to 25
channels per second, to help quickly find
interesting transmissions.
© 2001 RadioShack Corporation.
All Rights Reserved.
RadioShack and RadioShack.com are trademarks used by RadioShack Corporation.
Hyperscan, Hypersearch, and Adaptaplug are trademarks used by RadioShack Corporation.
2
Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Conversion
interference from image frequencies.
— helps prevent
• connecting your scanner to an outlet
that is on a different electrical circuit
from the receiver
WARNING: To reduce the risk the of fire or
shock hazard, do not expose this product to rain or
moisture.
• contacting your local RadioShack store
for help
CAUTION
..
..
RISK OF ELECTRIC
!
SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELEC-
TRIC SHOCK, DO NOT REMOVE COVER OR
BACK. NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL.
If you cannot eliminate the interference, the
FCC requires that you stop using your
scanner.
The lightning symbol is intended to alert you
to the presence of uninsulated dangerous
voltage within this product’s enclosure that
might be of sufficient magnitude to consti-
tute a risk of electric shock. Do not open the
product’s case.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) this device may not cause
harmful interference, and (2) this device
must accept any interference received,
including interference that may cause
undesired operation.
The exclamation symbol is intended to in-
form you that important operating and
maintenance instructions are included in
the literature accompanying this product.
!
Your scanner receives these frequencies
(MHz):
SCANNING LEGALLY
29–30
10m Amateur Radio
VHF Lo
30–50
Your scanner covers frequencies used by
many different groups including police and
fire departments, ambulance services,
government agencies, private companies,
amateur radio services, military operations,
pager services, and wireline (telephone and
telegraph) service providers. It is legal to
listen to almost every transmission your
scanner can receive. However, there are
some transmissions you should never
intentionally listen to. These include:
50–54
6 m Amateur Radio
Air
108–136.9875
137–144
144–148
148–174
380–420
420–450
450–470
470–512
Government
2 m Amateur Radio
VHF Hi
Government
70 cm Amateur Radio
UHF Lo
UHF “T” Band
• telephone conversations (cellular,
cordless, or other private means of
telephone signal transmission)
FCC NOTICE
Your scanner might cause TV or radio
interference even when it is operating
properly. To determine whether your scanner
is causing the interference, turn off your
scanner. If the interference goes away, your
scanner is causing it. Try to eliminate the
interference by:
• pager transmissions
• any scrambled or encrypted
transmissions
According to the Electronic Communications
Privacy Act (ECPA), you are subject to fines
and possible imprisonment for intentionally
listening to, using, or divulging the contents
of such a transmission unless you have the
consent of a party to the communication
(unless such activity is otherwise illegal).
• moving your scanner away from the
receiver
3
Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
This scanner has been designed to prevent
reception of illegal transmissions. This is
done to comply with the legal requirement
that scanners be manufactured so as to not
be easily modifiable to pick up those
legal to listen to. Doing so could subject you
to legal penalties.
We encourage responsible, legal scanner
use.
transmissions. Do not open your scanner's
case to make any modifications that could
allow it to pick up transmissions that it is not
Warning:
Modification of this device to
receive cellular radio telephone service
signals is prohibited under FCC rules and
under federal law.
ˆ Contents
Preparation ............................................................................................................................. 6
Power Sources .................................................................................................................. 6
Using AC Power ......................................................................................................... 6
Using Vehicle Battery Power ...................................................................................... 6
Connecting an Antenna .................................................................................................... 7
Connecting the Supplied Antenna ............................................................................. 7
Connecting an Outdoor Antenna ............................................................................... 7
Understanding Your Scanner ................................................................................................ 8
A Look at the Controls ....................................................................................................... 8
A Look at the Display ........................................................................................................ 9
Understanding Service Banks/Banks .............................................................................. 10
Channel Storage Banks ........................................................................................... 10
Service Banks .......................................................................................................... 11
Operation .............................................................................................................................. 14
Turning On the Scanner/Setting Volume and Squelch .................................................... 14
Storing Known Frequencies into Channels ..................................................................... 14
Finding and Storing Active Frequencies ......................................................................... 15
Searching the Service Banks ................................................................................... 15
Using Direct Search ................................................................................................. 16
Using the Monitor Memory .............................................................................................. 17
Listening to a Monitor MemoryýFrequency ............................................................... 17
Moving a Frequency from a Monitor Memory to a Channel ..................................... 17
Scanning the Stored Channels ....................................................................................... 17
Scanning Options .................................................................................................... 18
Turning Channel Storage Banks On and Off ................................................................... 18
Monitoring a Stored Channel .......................................................................................... 18
Clearing a Stored Channel .............................................................................................. 18
Listening to the Marine Bank ........................................................................................... 19
Listening to the Weather Band ........................................................................................ 19
Weather Channel Frequency Chart ........................................................................ 19
Using the Weather Alert ........................................................................................... 19
Special Features ................................................................................................................... 20
4
Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Delay Function ............................................................................................... 20
Locking Out Channels and Frequencies ........................................................................ 20
Locking Out Channels ............................................................................................. 20
Locking Out Frequencies ........................................................................................ 20
Reviewing Locked-Out
Frequencies ........................................................................................................................... 21
Removing All Locked-Out Tags From Frequencies ................................................. 21
Removing All Lockout Tags from Frequencies in All Service Banks ....................... 21
Using Priority ........................................................................................................... 21
Turning the Key Tone On and Off ................................................................................... 21
Using a Computer to Program the Scanner ................................................................... 22
Birdie Frequencies .......................................................................................................... 22
United States Broadcast Band ....................................................................................... 22
Guide to the Action Bands .................................................................................................. 23
Typical Band Usage ................................................................................................ 23
Primary Usage ......................................................................................................... 23
Band Allocation .............................................................................................................. 24
Avoiding Image Frequencies .......................................................................................... 27
Frequency Conversion ................................................................................................... 27
Troubleshooting ................................................................................................................... 28
Resetting/Initializing the Scanner ................................................................................... 28
Resetting the Scanner ............................................................................................. 28
Initializing the Scanner ............................................................................................ 29
Care ................................................................................................................................ 29
Specifications ...................................................................................................................... 30
5
Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
ˆ Preparation
Using Vehicle Battery Power
POWER SOURCES
You can power the scanner from a vehicle’s
12V power source (such as cigarette-lighter
socket) using a 12V, 300-mA DC cord and a
size M Adaptaplug™ connector (neither
supplied). Both are available at your local
RadioShack store.
Using AC Power
You can power the scanner using the
supplied 12V, 300mA AC adapter.
Cautions:
Cautions:
You must use a Class 2 power
source that supplies 12V DC
and delivers at least 300 mA.
Its center tip must be set to positive and
You must use a power cord
that can carry 12V DC and at
least 300 mA. Its center tip
!
!
DC12V
its plug must fit the scanner's
must be set to positive and its plug must
jack. The supplied adapter meets these
specifications. Using an adapter that
does not meet these specifications
could damage the scanner or the
adapter.
DC12V
fit the scanner's
jack. Using an
cord that does not meet these
specifications could damage the
scanner or the cord.
• Always connect the DC cord to the
scanner before you connect it to the
power source. When you finish,
disconnect the cord from the power
source before you disconnect it from the
scanner.
• Always connect the AC adapter to the
scanner before you connect it to AC
power. When you finish, disconnect the
adapter from AC power before you
disconnect it from the scanner.
Warning:
To prevent electric shock, do not
Follow these steps to power the scanner
from a vehicle’s cigarette-lighter socket.
use the AC adapter’s polarized plug with an
extension cord, receptacle, or other outlet
unless you can fully insert the blades to
prevent blade exposure.
Follow these steps to power the scanner
from a standard AC outlet.
1. Insert the AC adapter’s barrel plug into
DC12V
the
jack on the back of the
scanner.
2. Plug the adapter into a standard AC
outlet.
1. Connect the adaptaplug connector to
+
the DC cord so the tip reads positive ( ).
2. Insert the DC cord’s barrel plug into the
DC12V
jack on the back of the scanner.
6
Preparation
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Plug the cord into the vehicle’s
cigarette-lighter socket.
to hear, adjust the antenna's length
according to the chart below.
Notes
:
Frequency
Antenna Length
• If you use a 12V DC cord and your
vehicle's engine is running, you might
hear electrical noise on the scanner
caused by the engine. This is normal.
29–174 MHz
380–512 MHz
Extend fully
Extend 2 segments
• Mobile use of this scanner is unlawful or
requires a permit in some areas. Check
the laws in your area.
Connecting an Outdoor Antenna
Instead of the supplied antenna, you can
connect an outdoor base-station or mobile
antenna (neither supplied) to your scanner.
Your local RadioShack store sells a variety
of antennas. Choose the one that best meets
your needs.
CONNECTING AN ANTENNA
Connecting the Supplied Antenna
You must install an antenna before you can
operate the scanner.
When deciding on an outdoor antenna and
its location, consider these points:
The supplied telescoping antenna helps your
scanner receive strong local signals. To
install the antenna, thread it clockwise into
the hole on top of the scanner.
• The antenna should be located as high
as possible.
• The antenna and antenna cable should
be as far as possible from sources of
electrical noise (appliances, other
radios, and so on).
• The antenna should be vertical for the
best performance.
To connect an optional base-station or
mobile antenna, first remove the supplied
antenna from the scanner. Always use 50
Ohm coaxial cable, such as RG-58 or RG-8,
to connect the base-station or mobile
antenna. For lengths over 50 feet, use RG-8
low-loss dielectric coaxial cable. If the
antenna cable's connector does not fit in the
ANT
jack on the back of the scanner, you
The scanner's sensitivity depends on its
location and the antenna's length. For the
best reception of the transmissions you want
might also need a PL-259-to-Motorola
antenna plug adapter. Your local
RadioShack store carries a wide variety of
coaxial antenna cable and connectors.
Once you choose an antenna, follow the
mounting instructions supplied with the
antenna. Then route the antenna's cable to
7
Preparation
Download from Www.Somanuals.com. All Manuals Search And Download.
the scanner and connect the cable to the
cable, or guy wires can cause electrocution
and death. Call the power company to
remove the antenna. Do not attempt to do so
yourself.
ANT
jack.
Warning:
Use extreme caution when you
install or remove an outdoor antenna. If the
antenna starts to fall, let it go! It could contact
overhead power lines. If the antenna touches
a power line, contact with the antenna, mast,
Caution:
Do not run the cable over sharp
edges or moving parts that might damage it.
ˆ Understanding Your Scanner
service-search
Once you understand a few simple terms
used in this manual and familiarize yourself
with your scanner's features, you can put the
scanner to work for you. You simply
determine the type of communications you
want to receive, then set the scanner to scan
them.
You can also search the
banks
, which are preset groups of
frequencies categorized by type of service.
When you find a frequency, you can store it
into a programmable memory location called
channel
channels in a
scan
can then
a
, which is grouped with your other
channel-storage bank
. You
the channel-storage banks to
frequency
A
is the tuning location of a
station (expressed in kHz or MHz). To find
see if there is activity on the frequencies
stored there. Each time the scanner finds an
active frequency, it stays on that channel
until the transmission ends.
search
active frequencies, you can use the
function.
A LOOK AT THE CONTROLS
MON/CL
) and are
Some of the scanner’s keys perform more than one function (such as
marked with more than one label. The steps in this Owner’s Manual show only the label on the
key appropriate to the action being performed.
POWER
BAND
— lets you search service banks.
— turns the scanner on and off.
— adjusts the volume.
VOLUME
PRI/ALERT
— turns the priority function on
and off, or sets the scanner to WX alert
mode.
SQUELCH
— adjusts the scanner’s sensitivity
to an incoming signal.
8
Understanding Your Scanner
Download from Www.Somanuals.com. All Manuals Search And Download.
WX
PGM
(Program) — programs frequencies into
— scans through the seven
preprogrammed weather channels.
channels.
SCAN
Number Keys
— scans through the programmed
— each key has a single-digit
channels.
label and a range of numbers. Use the digits
on the keys to enter the numbers for a
channel or a frequency. Use the range of
numbers above the key (21–40, for example)
to select the channel in a channel-storage
bank.
MANUAL
— stops scanning and lets you
directly enter a channel number.
L/O RVW, L/O
(Lock Out Review/Lock Out) —
lets you review locked-out frequencies, or
lets you lock out selected channels/
frequencies so they will not be scanned or
searched.
DELAY/.
—- programs a 2-second delay for
the selected channel, or enters a decimal
point (necessary when programming
frequencies).
8#and 9 — enters the direction the
scanner will search or scan.
ENTER
—- enters frequencies into channels.
MON/CL
(Monitor/Clear) — accesses the 20
monitor memories or clears an incorrect
entry.
A LOOK AT THE DISPLAY
The display shows the scanner’s current operating mode.
FD/PD— appears when you search the fire/
police service bank.
8 or 9 — indicates the search or scan
direction.
BANK— appears with numbers (1–10).
Bank numbers with a bar under them show
which ones are turned on for scanning.
M— flashes with a number (1–20) to show
which monitor memory you are listening to.
CH—- the digits that precede this indicator
(1–200 and P) show which channel the
scanner is tuned to.
AIR— appears when you search the air
service bank.
HAM— appears when you search the ham
radio service bank.
L/O— appears when you manually select a
channel you locked out while scanning or
when you review a locked out frequency.
MARINE— appears when you search the
marine service bank.
WX— appears when you scan the weather
channels.
9
Understanding Your Scanner
Download from Www.Somanuals.com. All Manuals Search And Download.
SRCH— appears during service bank and
direct frequency searches.
P— appears when the scanner is tuned to
the priority channel.
SCAN— appears when you scan channels.
ALErt— appears when the scanner is
watching the WX alert tone.
MAN— appears when you manually select a
channel.
WIrEd— appears when you turn on the
wired programming mode.
PGM— appears while you program
frequencies into the scanner's channels.
StArt— appears when the scanner starts
wired programming.
PRI— appears when you turn on the priority
feature.
C-Err— appears when the scanner
receives a check sum error during wired
programming.
DLY— appears when you program a 2-
second delay.
D-Err— appears when the scanner finds a
data error while using wired programming.
Error— appears when you make an entry
error.
End— appears when the scanner finishes
wired programming.
-dUPL-(Duplicate) — appears when you
try to store a frequency that is already stored
in another channel.
oFFtonE— appears when you set the key
tone off.
-d-— appears during a direct frequency
search.
ontonE— appears when you set the key
tone on.
-b-— appears during a service bank
frequency search.
UNDERSTANDING SERVICE
BANKS/BANKS
Ch-FULL— appears when you try to enter
a frequency during a search when all
channels are full.
Channel Storage Banks
F L-out— appears when you start direct
search from a locked-out frequency.
To make it easier to identify and select the
channels you want to listen to, channels are
divided into 10 banks of 20 channels each.
Use each channel-storage bank to group
frequencies, such as those used by the
police department, fire department,
FLo-FULL— appears when you try to
lockout a frequency during a search when 50
frequencies are already locked out.
ambulance services, or aircraft (see “Guide
to the Action Bands” on Page 23). For
example, the police department might use
four frequencies, one for each side of town.
You could program the police frequencies
starting with Channel 1 (the first channel in
bank 1) and program the fire department
frequencies starting with Channel 21 (the
first channel in bank 2).
L-r— appears when you review the lockout
frequencies.
dEFAULt— appears when you unlock all
the locked-out frequencies from the service
bank.
FLoALL-CL— appears when you remove
all the locked out frequencies during a
service bank/direct search.
10
Understanding Your Scanner
Download from Www.Somanuals.com. All Manuals Search And Download.
Service Banks
The scanner is preprogrammed with the
frequencies allocated by fire/police, aircraft,
ham radio, and marine services. In these
service banks, you can search through the
frequencies and store them in channels for
fire/police, aircraft, ham radio, and marine
banks. This is handy for quickly finding active
frequencies instead of searching through an
entire band.
Note:
The frequencies in the scanner's
service bank are preset. You cannot change
them.
Air
Frequency Range
(MHz)
Step
(kHz)
Group
—
108.000–136.9875
12.5
Amateur Radio
Frequency Range
Step
(kHz)
Group
(MHz)
1
2
3
4
29.000–29.700
50.000–54.000
5
5
144.000–148.000
420.000–450.000
5
12.5
11
Understanding Your Scanner
Download from Www.Somanuals.com. All Manuals Search And Download.
Marine
Channel
Frequency (MHz)
Channel
Frequency (MHz)
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
156.3000
156.3500
64
65
66
67
68
69
70
71
72
73
74
77
78
79
80
81
82
83
84
85
86
87
88
156.2250
156.2750
156.4000
156.3250
156.4500
156.3750
156.5000
156.4250
156.5500
156.4750
156.6000
156.5250
156.6500
156.5750
156.7000
156.6250
156.7500
156.6750
156.8000
156.7250
156.8500
156.8750
156.9000
156.9250
156.9500
156.9750
157.0000/161.6000
157.0500
157.0250
157.0750
157.1000
157.1250
157.1500
157.1750
157.2000/161.8000
157.2500/161.8500
157.3000/161.9000
157.3500/161.9500
157.4000/162.0000
157.2250/161.8250
157.2750/161.8750
157.3250/161.9250
157.3750/161.9750
157.4250
12
Understanding Your Scanner
Download from Www.Somanuals.com. All Manuals Search And Download.
Fire/Police
Frequency Range
(MHz)
Step
(kHz)
Group
1
33.420–33.980
37.020–37.420
39.020–39.980
42.020–42.940
44.620–45.860
45.880
20
20
20
20
40
—
45.900
—
45.940–46.060
46.080–46.500
153.770–154.130
154.145–154.445
154.650–154.950
155.010–155.370
155.415–155.700
155.730–156.210
158.730–159.210
166.250
40
20
2
60
15
15
60
15
60
60
—
170.150
—
3
453.0375–453.9625
458.0375–458.9625
460.0125–460.6375
465.0125–465.6375
12.5
12.5
12.5
12.5
13
Understanding Your Scanner
Download from Www.Somanuals.com. All Manuals Search And Download.
ˆ Operation
Follow these steps to store frequencies into
channels.
TURNING ON THE
SCANNER/SETTING
VOLUME AND SQUELCH
PGM
1. Press
, enter the channel number
(1–200) where you want to store a
SQUELCH
1. Turn
fully counterclockwise
PGM
frequency, then press
again. The
MIN
until the indicator points to
.
channel number appears.
POWER
ON
to turn on the
2. Slide
3. Turn
to
2. Use the number keys and • to enter the
frequency (including the decimal point)
you want to store.
scanner.
VOLUME
clockwise until you hear a
hissing sound.
ENTER
3. Press
to store the frequency into
the channel.
SQUELCH
4. Turn
clockwise, just until the
hissing sound stops.
Notes
:
• If you made a mistake in Step 2,
Notes:
Errorappears and the scanner
• To listen to a weak or distant station,
ENTER
beeps when you press
.
SQUELCH
turn
counterclockwise. If
Simply start again from Step 2.
SQUELCH
reception is poor, turn
clockwise to cut out weak
transmissions.
• Your scanner automatically rounds
the entered frequency down to the
closest valid frequency. For example,
if you enter a frequency for 151.473,
your scanner accepts it as 151.470.
SQUELCH
• If
is adjusted so you always
hear a hissing sound, the scanner
does not scan or search properly.
• If you entered a frequency that is
already stored in another channel,
the scanner beeps three times and
displays the lowest channel number
where the frequency is already
stored, and -dUPL-then the
5. To turn off the scanner when you finish,
POWER
OFF
slide
to
.
STORING KNOWN
FREQUENCIES INTO
CHANNELS
frequency flashes. If you want to
store the frequency anyway, press
ENTER
MON/CL
to clear
again. Press
Good references for active frequencies are
the RadioShack Police Call, Aeronautical
Frequency Directory, and Maritime
Frequency Directory. We update these
directories every year, so be sure to get a
current copy.
the frequency.
DELAY
• Press
if you want the scanner
to pause 2 seconds on this channel
after a transmission ends before it
proceeds to the next channel (see
“Using the Delay Function” on
Page 20). The scanner also stores
this setting in the channel.
14
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
4. To program the next channel in
• To reverse the search direction at any
time, hold down 8 or 9 until the
scanner reverses the search
direction.
PGM
sequence, press
2 and 3.
and repeat Steps
FINDING AND STORING
ACTIVE FREQUENCIES
• To search the band up or down in
small increments repeatedly press
and release 8 or 9(see “Service
Banks” on Page 11).
Searching the Service Banks
Your scanner contains groups of preset
frequencies called service banks. Each
service bank is associated with a specific
activity (see “Understanding Service Banks/
Banks” on Page 10). You can search for fire/
police, air, ham, and marine transmissions
even if you do not know the specific
frequencies that are used in your area. Then
you can store the frequencies you found into
the scanner's channels or monitor memories.
• To pause the search while receiving a
signal, press and release 8 or 9.
To continue the search, hold down 8
or 9 for about 2 seconds.
• To move quickly up or down through
the frequencies, press and hold down
8 or 9. The scanner tunes through
the frequencies until you release 8
or 9.
• Use the number keys to select search
groups.
Note:
You can use the scanner's delay
feature while searching the service banks
(see “Using the Delay Function” on
Page 20).
3. When the scanner finds an active
frequency, it stops searching and
displays the frequency's number. To
store the displayed frequency in the
The following steps describe the operation of
the HAM, FD/PD, and AIR service banks. To
listen to the marine bank, see “Listening to
the Marine Bank” on Page 19.
PGM
lowest available channel, press
ENTER
then press
. The channel and
frequency flash twice, and the scanner
stores the displayed frequency. The
scanner then continues to search for
frequencies.
BAND
1. Press
. The last selected band
name (such as HAM), SRCH, -b-, the
frequency and the group number (if any)
appear.
Notes:
2. To select a different band, repeatedly
• If there is no empty channel, Ch-
BAND
press
until the desired band name
PGM
FULLappears when you press
.
appears on the display. After about 2
seconds, the scanner begins searching
rapidly up or down in that band for an
active frequency.
To store more frequencies, you must
clear some channels. See “Clearing a
Stored Channel” on Page 18. To
continue searching after Ch-FULL
appears, press and hold down 8 or
9.
Notes
:
• To search through the frequencies,
hold down 8 or 9 for a few
seconds. The scanner tunes through
the frequencies until it finds an active
frequency .
• If you entered a frequency that is
already stored in another channel, -
dUPL-and the lowest-numbered
channel containing the duplicate
15
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
frequency flash for about 3 seconds.
If you want to store the frequency
ENTER
2. Hold down 8
or 9 for a few seconds
to search up or down. -d-, SRCH, and
anyway, press
again. You can
8 or 9 appear on the display.
delete the frequency later.
4. To store the displayed frequency in the
PGM
selected channel, press
, press the
channel number you want to enter the
PGM
channel and press
again, then
Notes:
ENTER
press
. The channel and
• To reverse the search direction at any
time, hold down 8 or 9 for a few
seconds.
frequency flash twice, and the scanner
stores the displayed frequency. The
scanner continues to search for
frequencies.
• To search up or down in the selected
band in small increments (in steps of
5 or 12.5 kHz), press and release 8
or 9.
5. To store the displayed frequency in the
MON/CL
monitor memory, press
monitor memory number, M, and the
. The
frequency flash twice.
• To pause the search, press and
release 8 or 9. To begin searching
again, hold down 8 or 9.
6. To search for another active frequency
in the selected band, hold down 8 or
9until the radio begins searching.
• To quickly move up or down through
the frequencies, press and hold down
8 or 9. The scanner tunes through
the frequencies until you release 8
or 9.
7. To select a different band and search for
another active frequency, begin again
from Step 2.
Using Direct Search
3. When the scanner finds an active
frequency, it stops searching and
displays the frequency. To store the
displayed frequency in the lowest
During a direct search, the scanner searches
up or down, starting from a frequency you
specify. Follow these steps to use direct
search.
PGM
available channel, press
then press
ENTER
. The channel and frequency
flash twice, and the scanner stores the
frequency. The scanner continues to
search for frequencies.
Note
: You can use the scanner's delay
feature while using direct search.
MANUAL
PGM
, then enter the
1. Press
or
Notes:
frequency (including the decimal point)
you want to use as a starting point for
the search.
• If there is no empty channel, Ch-
FULLappears. To store more
frequencies, you must clear some
channels. “Clearing a Stored
Note:
To start from a frequency already
stored in one of your scanner's
channels, press
the desired channel number, then press
Channel” on Page 18. To continue
searching after Ch-FULLappears,
press and hold down 8 or 9.
MANUAL
PGM
, enter
or
MANUAL
PGM
again.
or
16
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
• If you entered a frequency that is
already stored in another channel, -
dUPL-and the lowest-numbered
channel containing the duplicate
frequency flash for about 3 seconds.
If you want to store the frequency
the current monitor memory frequency
appears. To select other monitor memories,
enter the desired monitor memory's number
MON/CL
(1–20), then press
again.
ENTER
anyway, press
again.
• To store the displayed frequency in
PGM
the selected channel, press
,
Moving a Frequency from a
Monitor Memory to a Channel
press the channel number you want
PGM
to use and press
again, then
. The channel and
frequency flash twice, and the
scanner stores the frequency. Then
the scanner continues to search for
frequencies.
ENTER
press
PGM
1. Press
, enter the channel number
where you want to store the frequency,
PGM
then press
again. PGMand the
selected channel number appear.
MON/CL
2. Press
. M, a monitor memory
4. To store the frequency in the monitor
number, and CHflash, and the monitor
memory frequency appear.
MON/CL
memory, press
. M, the monitor
memory number, and the frequency
flash twice.
3. Enter the desired monitor memory's
MON/CL
number (1–20), then press
5. To search for another active frequency,
again. The selected monitor memory's
frequency appears.
hold down 8 or 9.
USING THE MONITOR
MEMORY
ENTER
4. Press
. The scanner stores the
frequency in the selected channel.
The scanner has 20 monitor memories that
you can use to temporarily store frequencies
while you decide whether to save them into
channels. This is handy for quickly storing an
active frequency when you are searching
through an entire band. You can store a
frequency into a monitor memory during a
service bank or direct search.
5. To move another monitor memory
frequency to the next channel, press
PGM
and repeat Steps 2–4.
SCANNING THE STORED
CHANNELS
To set the scanner to continuously scan
through all channels with stored frequencies,
You can select monitor memories manually,
but you cannot scan them. See "Listening to
a Monitor Memory Frequency."
SCAN
press
. SCANand 8 appear, and the
scanner begins to rapidly scan until it finds
an active frequency.
Listening to a Monitor Memory
Frequency
To recall a frequency stored in the monitor
MANUAL
MON/CL
. M, the
memory, press
then
If the scanner finds an active frequency, it
stops and displays that channel and
monitor memory number, and CHflash and
17
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
frequency number, then it automatically
begins scanning again when the
• You can manually select any channel in
a bank, even if the bank is turned off.
transmission ends on that frequency.
• When you turn on the bank while
scanning, the scanner moves to the
selected bank's first channel and
continues scanning.
Scanning Options
While scanning you can select from several
options to enhance your scanning enjoy-
ment.
MONITORING A STORED
CHANNEL
• To reverse the scanning direction at any
time, press 8or 9.
You can continuously monitor a specific
channel without scanning. This is useful if
you hear an emergency broadcast on a
channel and do not want to miss any details
— even though there might be periods of
silence — or if you simply want to monitor
that channel.
• To set the scanner to remain on the
current channel for 2 seconds after the
transmission ends, see “Using the Delay
Function” on Page 20.
• To set the scanner to remain on the
current channel even after the
Follow these steps to manually select a
channel.
MANUAL
transmission stops, press
at
any time during the transmission so MAN
appears and SCANdisappears. See
“Monitoring a Stored Channel.”
MANUAL
1. Press
.
2. Enter the channel number (1–200).
• To lock out channels so the scanner
does not stop for a transmission on
those channels, see “Locking Out
Channels and Frequencies” on Page 20.
MANUAL
3. Press
again.
CLEARING A STORED
CHANNEL
TURNING CHANNEL
STORAGE BANKS ON AND
OFF
If you no longer want a frequency stored in a
channel (and you do not want to replace that
frequency with a different one), follow these
steps to clear the stored frequency.
To turn off banks while scanning, press the
bank’s number key until the bar under the
bank’s number disappears. The scanner
does not scan any of the channels within the
banks you have turned off.
MANUAL
1. Press
to exit the service banks
or to stop scanning.
2. Use the number keys to select the
desired channel number, then press
To turn on banks while scanning, press the
bank’s number key until a bar appears under
the bank’s number.
MANUAL
.
PGM
3. Press
. PGMappears.
Notes:
0
ENTER
. The
4. Press , then press
frequency number changes to
000.0000to indicate the channel is
cleared.
• You cannot turn off all banks. There
must be at least one active bank.
18
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
5. To clear another channel, use the
number keys to enter that channel
Weather Channel Frequency
Chart
PGM
number, then press
again. Or,
until the desired
PGM
repeatedly press
Weather
channel number appears. Then repeat
Step 4.
Frequency (MHz)
Channel
1
2
3
4
5
6
7
162.400
162.425
162.450
162.475
162.500
162.525
162.550
LISTENING TO THE MARINE
BANK
1. To listen to the marine bank, repeatedly
BAND
press
until MARINEappears.
2. To change the channel, press either 8
or 9, or enter the two-digit channel.
3. To scan through the marine bank, rotate
SQUELCH
clockwise until the hiss just
disappears, then hold down either 8 or
9 for about 2 seconds. MAN
disappears and SCANappears.
Using the Weather Alert
This scanner can receive NOAA weather
alert tone broadcasts in case of an
emergency. The weather alert tone sound
warns you of serious weather conditions.
4. To exit scanning and to change the
channel manually, hold down 8 or 9
for about 2 seconds.
PRI/ALERT
To listen for an alert tone, press
LISTENING TO THE
WEATHER BAND
while you are tuned to the weather channel.
ALErtappears. If the scanner detects a
weather alert, it sounds a tone. Press any
key to mute the tone. To cancel the alert
monitoring and return to the weather channel
The FCC (Federal Communications
Commission) has allocated seven
frequencies for use by the National Oceanic
and Atmospheric Administration (NOAA).
NOAA broadcasts your local forecast and
regional weather information on one or more
of these frequencies. We have programmed
your scanner with these seven frequencies.
PRI/ALERT
standard broadcast, press
again.
To hear your local forecast and regional
WX
weather information, press
. The scanner
begins to scan the weather band.
You will probably receive one frequency
better than the others for your area. The
scanner should stop within a few seconds on
that frequency. If the broadcast is weak,
WX
press
again to resume scanning.
19
Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
ˆ Special Features
Chart” on Page 19) or birdie frequency (see
“Birdie Frequencies” on Page 22).
USING THE DELAY
FUNCTION
Many agencies use a two-way radio system
that has a period of several seconds
Locking Out Channels
between a query and a reply. To avoid
missing a reply, you can program a 2–
second delay into any channel or frequency.
To lock out a channel while scanning, press
L/O (L/O RVW)
and release
stops on the channel.
when the scanner
When your scanner stops on any channel or
frequency with a programmed delay, DLY
appears and the scanner continues to
monitor that frequency for an additional 2
seconds after the transmission stops before
resuming scanning or searching.
To lock out a channel manually, select the
L/O (L/O
channel then press and release
RVW)
until L/Oappears.
To unlock a channel, manually select that
L/O (L/O RVW)
channel again, then press
. L/
Odisappears from the display.
You can program a 2 second delay in any of
these ways:
Notes
:
• The scanner automatically locks out
empty channels.
• If the scanner is scanning and stops on
DELAY
an active channel, quickly press
before it continues scanning.
• You can still manually tune to locked-out
channels.
• If the desired channel is not selected,
manually select the channel, then press
DELAY
.
Locking Out Frequencies
• If the scanner is searching, press
To lock out a frequency during a service
DELAY
. DLYappears and the scanner
L/O (L/O RVW)
bank, or a direct search, press
automatically adds a 2-second delay to
every transmission it stops on in that
band.
when the scanner stops on the frequency.
The scanner locks out the frequency then
continues searching. You can lock out
frequencies in both direct search and service
bank searches.
DELAY
To turn off the delay, press
while the
scanner is monitoring the channel or
frequency. DLYdisappears.
Note
: You can lock out as many as 50
frequencies during a search. If you try to lock
out more, FLo-FULLappears (see
“Reviewing Locked-Out Frequencies” on
Page 21and “Removing All Locked-Out Tags
From Frequencies” on Page 21).
LOCKING OUT CHANNELS
AND FREQUENCIES
You can increase the scanning or search
speed by locking out individual channels or
frequencies that have a continuous
transmission, such as a weather channel
(see the “Weather Channel Frequency
20
Special Features
Download from Www.Somanuals.com. All Manuals Search And Download.
MON/CL
tags, press
to continue
Reviewing Locked-Out
Frequencies
reviewing the lockout frequencies.
To review the frequencies you locked out,
Using Priority
L/O (L/O RVW)
hold down
at least 2 seconds
during a search. L-rappears. As you press
8 or 9, all locked-out frequencies appear
in sequence. When you reach the highest
frequency, the scanner beeps twice then
returns to the lowest locked-out frequency.
You can scan the programmed channels
using the priority feature, and still not miss an
important or interesting call.
Follow these steps to program the priority
channel.
Removing All Locked-Out Tags
From Frequencies
PGM
PRI/ALERT
1. Press
, then press
.
2. Enter the desired frequency using the
number keys.
1. Start a service bank or direct search.
See “Using Direct Search” on Page 16.
ENTER
3. Press
.
2. To review the frequencies you locked
L/O (L/O RVW)
PRI
out, hold down
for about 2
4. To turn on the priority feature, press
(ALERT)
seconds during the search. L-r
while scanning. PRIappears.
appears.
The scanner checks the priority channel
every 2 seconds and stays on the
channel if there is activity. PCHappears
when the scanner is set to the priority
channel.
MON/CL
L/O (L/O
3. Hold down
then press
RVW)
. FLoALL-CLappears.
ENTER
4. Press
to clear all lockout tags.
The frequency clears and 000.0000
appears. To exit without clearing all
PRI
5. To turn off the priority feature, press
.
PRIdisappears.
MON/CL
locked out frequencies, press
.
If you designate a weather frequency as the
priority channel, the scanner detects the
weather alert tone while the priority feature is
on. When the scanner detects a weather
alert tone, ALErtflashes. To cancel the
alert tone, press any key. The scanner
continues to monitor the weather channel.
Removing All Lockout Tags from
Frequencies in All Service Banks
1. Start a service bank or direct search.
See “Using Direct Search” on Page 16.
2. To review the frequencies you locked
L/O (L/O RVW)
out, hold down
for about 2
TURNING THE KEY TONE
ON AND OFF
seconds during the search. L-r
appears.
The scanner is preset to sound a tone each
time you press one of its keys. You can turn
the key tone on or off.
MON/CL
BAND
.
3. Hold down
then press
dEFAULtappears.
ENTER
4. Press
to clear the lockout
POWER OFF
1. If the scanner is on, slide
to turn it off.
to
frequencies in all the service banks
(except the weather and marine banks).
If you do not want to clear the lockout
21
Special Features
Download from Www.Somanuals.com. All Manuals Search And Download.
2
ENTER
, turn
2. While you hold down and
The known birdie frequencies to watch for
are:
on the scanner. The display shows oFF
tonEor ontonE. Then release the
keys.
29.800
30.375
32.075
38.400
40.000
40.980
51.200
112.4875
115.200
120.5125
122.9375
128.000
128.375
136.5875
149.400
152.655
160.470
162.200
168.495
384.550
388.3875
398.5625
414.6125
426.7875
431.1625
441.3875
457.4375
462.7875
478.8375
USING A COMPUTER TO
PROGRAM THE SCANNER
You can connect your scanner to a personal
computer and program frequencies into the
scanner from the computer using an optional
cable and software.
Note:
The necessary cable and software,
and additional information about using your
personal computer to program your scanner,
are available at your local RadioShack store.
BIRDIE FREQUENCIES
Every scanner has birdie frequencies.
Birdies are signals created inside the
scanner’s receiver. These operating
frequencies might interfere with
transmissions on the same frequencies. If
you program one of these frequencies, you
hear only noise on that frequency. If the
interference is not severe, you might be able
UNITED STATES
BROADCAST BAND
In the United States, there are several
broadcast bands. The standard AM and FM
bands are probably the most well known.
There are also four television audio
broadcast bands — the lower three transmit
on the VHF band and the fourth transmits on
the UHF band. You can use your scanner to
monitor the 470–512 MHz portion of the UHF
band.
SQUELCH
to turn
birdie.
clockwise to cut out the
To find the birdies in your scanner, follow
these steps.
1. Disconnect the antenna and move it
away from the receiver. Make sure that
no other operating radio or TV sets are
nearby.
2. Search in each frequency band from the
lowest frequency to the highest. If the
search stops on a frequency, but you
hear no sound, chances are you have
located a birdie. Note all birdie
frequencies for reference.
22
Special Features
Download from Www.Somanuals.com. All Manuals Search And Download.
ˆ Guide to the Action Bands
Typical Band Usage
HF Band (3.00–30.00 MHz)
29.00–29.70 MHz
10 m Amateur
High Range
29.70–29.90 MHz
VHF Band (30.00–300.0 MHz)
30.00–50.00 MHz
50.00–54.00 MHz
137.00–144.00 MHz
144.00–148.00 MHz
148.00–174.00 MHz
Low Range
6 m Amateur
U.S. Government
2 m Amateur
High Range
UHF Band (300.00 MHz–3.0 GHz)
U.S. Government
70 cm Amateur
Low Range
FM-TV Audio Broadcast, Wide Band
380.00–420.00 MHz
420.00–450.00 MHz
450.00–470.00 MHz
470.00–512.00 MHz
Primary Usage
As a general rule, most of the radio activity is concentrated on the following frequencies:
VHF Band
Government, Police, and Fire
Emergency Services
Railroad
153.785–155.980 MHz
158.730–159.460 MHz
160.000–161.900 MHz
UHF Band
Land-Mobile Paired Frequencies
Base Stations
450.000–470.000 MHz
451.025–454.950 MHz
456.025–459.950 MHz
460.025–464.975 MHz
465.025–469.975 MHz
Mobile Units
Repeater Units
Control Stations
Note:
Remote control stations and mobile units operate at 5 MHz higher than their associated
base stations and relay repeater units.
23
Guide to the Action Bands
Download from Www.Somanuals.com. All Manuals Search And Download.
BAND ALLOCATION
To help decide which frequency ranges to scan, use the following listing of the typical services
that use the frequencies your scanner receives. These frequencies are subject to change, and
might vary from area to area. For a more complete listing, refer to the Beyond Police Call,
available at your local RadioShack store.
Abbreviations
Services
AIR ................................................................................................................................... Aircraft
BIFC .................................................................................... Boise (ID) Interagency Fire Cache
BUS ............................................................................................................................. Business
CAP ..................................................................................................................... Civil Air Patrol
CCA ................................................................................................................. Common Carrier
CSB ........................................................................................................ Conventional Systems
CTSB ........................................................................................ Conventional/Trunked Systems
FIRE ................................................................................................................. Fire Department
HAM ........................................................................................................ Amateur (Ham) Radio
GOVT ........................................................................................................ Federal Government
GMR ........................................................................................................ General Mobile Radio
GTR ................................................................................................................. General Trunked
IND ............................................................................................................... Industrial Services
(Manufacturing, Construction, Farming, Forest Products)
MAR ...................................................................................................... Military Amateur Radio
MARI ..................................................................................................... Maritime Limited Coast
(Coast Guard, Marine Telephone, Shipboard Radio, Private Stations)
MARS ......................................................................................... Military Affiliate Radio System
MED ............................................................................................ Emergency/Medical Services
MIL ......................................................................................................................... U.S. Military
MOV ............................................................................................ Motion Picture/Video Industry
NEW ........................................................................................................... New Mobile Narrow
NEWS ............................................................................... Relay Press (Newspaper Reporters)
OIL ......................................................................................................... Oil/Petroleum Industry
POL .............................................................................................................. Police Department
PUB ................................................................................................................... Public Services
(Public Safety, Local Government, Forestry Conservation)
PSB ....................................................................................................................... Public Safety
PTR .................................................................................................................. Private Trunked
ROAD ........................................................................................ Road & Highway Maintenance
RTV .................................................................................. Radio/TV Remote Broadcast Pickup
TAXI ....................................................................................................................... Taxi Services
TELB .............................................................................................................. Mobile Telephone
(Aircraft, Radio Common Carrier, Landline Companies)
TELM .................................................................................................... Telephone Maintenance
TOW ......................................................................................................................... Tow Trucks
TRAN .................................................................................................... Transportation Services
(Trucks, Tow Trucks, Buses, Railroad, Other)
TSB ................................................................................................................ Trunked Systems
TVn ...................................................................................................... FM-TV Audio Broadcast
USXX ..................................................................................................... Government Classified
UTIL ....................................................................................................... Power & Water Utilities
WTHR ........................................................................................................................... Weather
HIGH FREQUENCY (HF)—(3 MHz–30MHz)
10 m Amateur Band (28.0–29.7 MHz)
29.000–29.700 ................................................................................................................... HAM
24
Guide to the Action Bands
Download from Www.Somanuals.com. All Manuals Search And Download.
VERY HIGH FREQUENCY (VHF)—(30 MHz–300 MHz)
VHF Low Band (29.7–50 MHz—in 5 kHz steps)
29.700–29.790 ..................................................................................................................... IND
29.900–30.550 .......................................................................................................... GOVT, MIL
30.580–31.980 ............................................................................................................ IND, PUB
32.000–32.990 .......................................................................................................... GOVT, MIL
33.020–33.980 .................................................................................................. BUS, IND, PUB
34.010–34.990 .......................................................................................................... GOVT, MIL
35.020–35.980 ....................................................................................... BUS, PUB, IND, TELM
36.000–36.230 .......................................................................................................... GOVT, MIL
36.230–36.990 ............................................................................. Oil Spill Cleanup, GOVT, MIL
37.020–37.980 ............................................................................................................ PUB, IND
38.000–39.000 .......................................................................................................... GOVT, MIL
39.020–39.980 .................................................................................................................... PUB
40.000–42.000 ............................................................................................... GOVT, MIL, MARI
42.020–42.940 .................................................................................................................... POL
42.960–43.180 ..................................................................................................................... IND
43.220–43.680 ................................................................................................ TELM, IND, PUB
43.700–44.600 .................................................................................................................. TRAN
44.620–46.580 ........................................................................................................... POL, PUB
46.600–46.990 ................................................................................................................. GOVT
47.020–47.400 .................................................................................................................... PUB
47.420 ....................................................................................................... American Red Cross
47.440–49.580 ............................................................................................................ IND, PUB
49.610–49.990 ..................................................................................................................... MIL
6 m Amateur Band (50–54 MHz)
50.00–54.00 ....................................................................................................................... HAM
U.S. Government Band (138–144 MHz)
137.000–144.000 ...................................................................................................... GOVT, MIL
2 m Amateur Band (144–148 MHz)
144.000–148.000 ............................................................................................................... HAM
VHF High Band (148–174 MHz)
148.050–150.345 .............................................................................................. CAP, MAR, MIL
150.775–150.790 ................................................................................................................ MED
150.815–150.980 ....................................................................................TOW, Oil Spill Cleanup
150.995–151.475 .................................................................................................... ROAD, POL
151.490–151.955 ........................................................................................................ IND, BUS
151.985 ............................................................................................................................. TELM
152.0075 ............................................................................................................................ MED
152.030–152.240 .............................................................................................................. TELB
152.270–152.480 .............................................................................................. IND, TAXI, BUS
152.510–152.840 .............................................................................................................. TELB
152.870–153.020 ....................................................................................................... IND, MOV
153.035–153.725 ................................................................................................ IND, OIL, UTIL
153.740–154.445 ...................................................................................................... PUB, FIRE
154.490–154.570 ........................................................................................................ IND, BUS
154.585 ............................................................................................................ Oil Spill Cleanup
154.600–154.625 ................................................................................................................ BUS
154.655–156.240 ................................................................................ MED, ROAD, POL, PUB
156.255–157.425 ....................................................................................................... OIL, MARI
157.450 .............................................................................................................................. MED
25
Guide to the Action Bands
Download from Www.Somanuals.com. All Manuals Search And Download.
157.470–157.515 .............................................................................................................. TOW
157.530–157.725 ....................................................................................................... IND, TAXI
157.740 .............................................................................................................................. BUS
157.770–158.100 .............................................................................................................. TELB
158.130–158.460 .......................................................................... BUS, IND, OIL, TELM, UTIL
158.490–158.700 .............................................................................................................. TELB
158.730–159.465 .......................................................................................... POL, PUB, ROAD
159.480 ................................................................................................................................ OIL
159.495–161.565 ............................................................................................................. TRAN
161.580–162.000 ............................................................................................. OIL, MARI, RTV
162.0125–162.35 ......................................................................................... GOVT, MIL, USXX
162.400–162.550 ............................................................................................................ WTHR
162.5625–162.6375 ..................................................................................... GOVT, MIL, USXX
162.6625 ............................................................................................................................ MED
162.6875–163.225 ....................................................................................... GOVT, MIL, USXX
163.250 .............................................................................................................................. MED
163.275–166.225 ......................................................................................... GOVT, MIL, USXX
166.250 ......................................................................................................... GOVT, RTV, FIRE
166.275–169.400 ................................................................................................... GOVT, BIFC
169.445–169.505 .................................................................................. Wireless Mikes, GOVT
169.55–169.9875 ......................................................................................... GOVT, MIL, USXX
170.000–170.150 ................................................................................ BIFC, GOVT, RTV, FIRE
170.175–170.225 ............................................................................................................. GOVT
170.245–170.305 ............................................................................................... Wireless Mikes
170.350–170.400 ..................................................................................................... GOVT, MIL
170.425–170.450 ............................................................................................................... BIFC
170.475 .............................................................................................................................. PUB
170.4875–173.175 ....................................................................... GOVT, PUB, Wireless Mikes
173.225–173.5375 .............................................................................. MOV, NEWS, UTIL, MIL
173.5625–173.5875 .......................................................................... MIL Medical/Crash Crews
173.60–173.9875 ............................................................................................................. GOVT
ULTRA HIGH FREQUENCY (UHF)—(300 MHz–3 GHz)
U. S. Government Band (380–406 MHz)
381.800–383.900 ............................................................................................................. GOVT
U. S. Government Band (406–450 MHz)
406.125–419.975 ................................................................................................. GOVT, USXX
70 cm Amateur Band (420–450 MHz)
420.000–450.000 ............................................................................................................... HAM
Low Band (450–470 MHz)
450.050–450.925 ................................................................................................................ RTV
451.025–452.025 ................................................................................... IND, OIL, TELM, UTIL
452.0375–453.00 ..................................................................... IND, TAXI, TRAN TOW, NEWS
453.0125–454.000 ...................................................................................................... PUB, OIL
454.025–454.975 .............................................................................................................. TELB
455.050–455.925 ................................................................................................................ RTV
457.525–457.600 ............................................................................................................... BUS
458.025–458.175 ............................................................................................................... MED
460.0125–460.6375 ........................................................................................ FIRE, POL, PUB
460.650–462.175 ............................................................................................................... BUS
462.1875–462.450 ..................................................................................................... BUS, IND
462.4625–462.525 ................................................................................. IND, OIL, TELM, UTIL
462.550–462.925 ..................................................................................................... GMR, BUS
26
Guide to the Action Bands
Download from Www.Somanuals.com. All Manuals Search And Download.
462.9375–463.1875 ........................................................................................................... MED
463.200–467.925 ................................................................................................................ BUS
FM-TV Audio Broadcast, UHF Wide Band (470–512 MHz)
(Channels 14 through 20 in 6 MHz steps)
475.750 .................................................................................................................... Channel 14
481.750 .................................................................................................................... Channel 15
487.750 .................................................................................................................... Channel 16
493.750 .................................................................................................................... Channel 17
499.750 .................................................................................................................... Channel 18
505.750 .................................................................................................................... Channel 19
511.750 .................................................................................................................... Channel 20
Note:
Some cities use the 470–512 MHz band for land/mobile service.
AVOIDING IMAGE FREQUENCIES
You might discover one of your regular stations on another frequency that is not listed. It might
be what is known as an image frequency. For example, you might find a service that regularly
uses a frequency of 453.275 also on 474.675.
To see if it is an image, do a little math.
Note the new frequency.
474.675
Double the intermediate frequency of 10.7 MHz (21.400)
and subtract it from the new frequency.
–21.400
453.275
If the answer is the regular frequency,
then you have tuned to an image.
Occasionally, you might get interference on a weak or distant channel from a strong broadcast
21.4 MHz above or below the tuned frequency. This is rare, and the image signal is usually
cleared whenever there is a broadcast on the actual frequency.
FREQUENCY CONVERSION
The tuning location of a station can be expressed in frequency (kHz or MHz) or in wavelength
(meters). The following information can help you make the necessary conversions.
1 MHz (million) = 1,000 kHz (thousand)
To convert MHz to kHz, multiply the number of MHz by 1,000:
30.62 MHz × 1000 = 30,620 kHz
To convert from kHz to MHz, divide the number of kHz by 1,000.
127,800 kHz ÷ 1000 = 127.8 MHz
To convert MHz to meters, divide 300 by the number of MHz.
300 ÷ 50 MHz = 6 meters
27
Guide to the Action Bands
Download from Www.Somanuals.com. All Manuals Search And Download.
ˆ Troubleshooting
If your scanner stops operating properly, these suggestions might help you eliminate the
problem. If the scanner still does not operate properly, take it to your local RadioShack store for
assistance.
PROBLEM
SUGGESTION
SQUELCH
is adjusted properly. See “Turning On the
Scanner is on, but will not scan.
Be sure
Scanner/Setting Volume and Squelch” on Page 14.
MAN SCAN
.
Be sure
is not displayed. If it is, press
Scanner receives stations poorly or
not at all.
Check the antenna (indoor or outdoor).
Signals may be blocked from being received by the scanner due
to metal frames or material in the building. Change
the scanner’s location and try again.
The scanner’s keys do not work, or
The scanner might be locked. Reset the scanner. If that does
the display shows random segments. not work, reinitialize the scanner. See “Resetting/Initializing the
Scanner.”
Scanner does not work at all.
Check that the power supply (AC adapter/AC outlet) is working.
The scanner might be locked. Reset the scanner. If that does
not work, reinitialize the scanner. See “Resetting/Initializing the
Scanner.”
SQUELCH
is adjusted properly.
Scanner locks on frequencies that
have an unclear transmission.
Be sure
Be sure birdie frequencies are not programmed, or listen to
birdie frequencies manually. See “Birdie Frequencies” on
Page 22.
2. Insert a pointed object, such as a
RESETTING/INITIALIZING
THE SCANNER
straightened paper clip, into the reset
opening on the back of the scanner (as
shown) and gently press then release
the reset button inside the opening. If
the scanner still does not work properly,
you might need to initialize the scanner.
If the scanner's display locks up or does not
work properly after you connect a power
source, you might need to reset or initialize
the scanner.
Important
: If you have problems, first try to
reset the scanner. If that does not work, you
can initialize the scanner; however, this
clears all information stored in your
scanner's memory.
Resetting the Scanner
1. Turn off the scanner, then turn it on
again.
28
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Initializing the Scanner
Important
: This procedure clears all infor-
mation you stored in the scanner's memory.
Initialize the scanner only when you are sure
the scanner is not working properly.
1. Turn off the scanner, then turn it on
again.
MON/CL
2. Hold down
.
MON/CL
3. While you hold down
, insert a
pointed object, such as a straightened
RESET
paper clip, into the
opening on
the back of the scanner and gently press
then release the reset button inside the
opening. The display should clear.
4. When the display reappears, release
MON/CL
.
Note:
You must release the reset button
MON/CL
before you release
, otherwise the
memory might not clear.
CARE
Keep the scanner dry; if it gets wet, wipe it
dry immediately. Use and store the scanner
only in normal temperature environments.
Handle the scanner carefully; do not drop it.
Keep the scanner away from dust and dirt,
and wipe it with a damp cloth occasionally to
keep it looking new.
Modifying or tampering with the scanner’s
internal components can cause a
malfunction and might invalidate its warranty
and void your FCC authorization to operate
it. If your scanner is not performing as it
should, take it to your local RadioShack store
for assistance.
29
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
ˆ Specifications
Frequency Coverage:
Ham ................................................................................................ 29–30 MHz (5.0 kHz Steps)
VHF Lo ........................................................................................... 30–50 MHz (5.0 kHz Steps)
Ham ................................................................................................ 50–54 MHz (5.0 kHz Steps)
Air .................................................................................... 108–136.9875 MHz (12.5 kHz Steps)
Government ................................................................................... 137–144 MHz (5 kHz Steps)
Ham ............................................................................................... 144–148 MHz (5 kHz Steps)
VHF Hi ........................................................................................... 148–174 MHz (5 kHz Steps)
Ham/Government ..................................................................... 380–450 MHz (12.5 kHz Steps)
UHF Lo ..................................................................................... 450–470 MHz (12.5 kHz Steps)
UHF Hi (T) ................................................................................ 470–512 MHz (12.5 kHz Steps)
Channels of Operation ................................................200 Channels and 20 Monitor Memories
Sensitivity (20 dB S/N):
29–54 MHz ............................................................................................................... 0.5 µV
108–136.9875 MHz .................................................................................................. 1.0 µV
137–174 MHz ........................................................................................................... 0.5 µV
380–512 MHz ........................................................................................................... 0.7 µV
Selectivity:
±10 kHz ..................................................................................................................... –6 dB
±18 kHz ................................................................................................................... –50 dB
Spurious Rejection ............................................................................... 50 dB (FM at 154 MHz)
Scanning Rate ................................................................................. Up to 25 Channels/Second
Search Rate .......................................................................................... Up to 50 Steps/Second
Delay Time ................................................................................................................ 2 Seconds
Intermediate Frequencies (IF):
1st ........................................................................................................................ 10.7 MHz
2nd ......................................................................................................................... 455 kHz
IF Interference Ratio (10.7 MHz) ................................................................... 70 dB at 154 MHz
Squelch Sensitivity:
Threshold ................................................................................................. Less than 0.5 µV
Tight (FM) .................................................................................................... (S+N)/N 25 dB
Tight (AM) ................................................................................................... (S+N)/N 20 dB
Antenna impedance .................................................................................................... 50 Ohms
30
Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Output Power (10% THD) ......................................................................... 0.8 W Nominal
Built-in Speaker ............................................................ 3 inch (77 mm), 8-Ohm, Dynamic Type
Power Requirements ............................................................................... 120 V AC, 60 Hz, 8W
Current Drain ................................................................................................................. 300 mA
Operating Temperature ........................................................................................ 32°F to 110°F
(0°C to 43°C)
Dimensions (HWD) ............................................................................... 21/16 × 81/4 × 67/8 inches
(52 × 210 × 175 mm)
Weight (without antenna and batteries) ............................................................................. 24 oz
(680 g)
Supplied Accessories .............................................................................. Telescoping Antenna,
AC Adapter
Specifications are typical; individual units might vary. Specifications are subject to change and
improvement without notice.
31
Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited One-Year Warranty
This product is warranted by RadioShack against manufacturing defects in material and workman-
ship under normal use for one (1) year from the date of purchase from RadioShack company-owned
stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, Ra-
dioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING
THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED
IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED
HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RE-
SPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY
LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFOR-
MANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, IN-
CLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS
OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDEN-
TAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limita-
tion of incidental or consequential damages, so the above limitations or exclusions may not apply to
you.
In the event of a product defect during the warranty period, take the product and the RadioShack
sales receipt as proof of purchase date to any RadioShack store. RadioShack will, at its option, un-
less otherwise provided by law: (a) correct the defect by product repair without charge for parts and
labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase
price. All replaced parts and products, and products on which a refund is made, become the prop-
erty of RadioShack. New or reconditioned parts and products may be used in the performance of
warranty service. Repaired or replaced parts and products are warranted for the remainder of the
original warranty period. You will be charged for repair or replacement of the product made after the
expiration of the warranty period.
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse,
accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or
maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs
other than those provided by a RadioShack Authorized Service Facility; (c) consumables such as
fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs
of product removal, installation, set-up service adjustment or reinstallation.
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102
12/99
A
20-423
GE-01D-5370
11A01
Printed in China
RadioShack Corporation
Fort Worth, Texas 76102
Download from Www.Somanuals.com. All Manuals Search And Download.
|