Radio Shack Scale 63 1525 User Guide

Large Display - shows your body fat  
percentage and body fat type.  
What’s Included  
Body Fat Analyzer One CR 2032 Battery  
Owner’s Manual  
Grip Pads - grip  
these to take a  
measurement.  
Important  
Body Fat Analyzer  
Do not use the analyzer if you are pregnant,  
have a pacemaker implanted in your body, or  
are on an electronic life support system. The  
measurements made by the analyzer are for  
personal reference only. Consult your doctor for  
more information about body fat. It is best to  
use the same body fat analyzer during your  
training in order to receive consistent readings.  
Readings may vary among other body fat  
analyzers.  
63-1525  
Step One  
Installing the Battery  
Your body fat analyzer comes with one CR  
2032 button cell battery (uninstalled).  
(/) - lets you  
select and enter  
information.  
1. Slide off the cover.  
2. Insert the battery, with the positive (+)  
Step Three  
side up. kg/cmflashes.  
Storing a Personal Profile  
3. Replace the cover.  
Your analyzer stores up to eight personal profiles, letting you enter and save information for up to eight people. You can  
also enter a temporary profile, which the analyzer does not save.  
If the analyzer  
turns off after you  
install the battery,  
press º to turn it  
on and make sure  
the measurement  
unit (kg/cmor  
lb/ft/in) you  
want to display appears.  
3. Repeatedly press ( or ) until  
your weight appears, then press S.  
Repeat these steps to store your  
height, age, and gender.  
2. Repeatedly press ( or ) to select  
the desired profile number. Then hold  
down S until 110 lb or 50 kg(the  
default weight setting) flashes.  
1. Select a measurement unit by  
repeatedly pressing (or ) while  
kg/cm(kilograms/centimeters) or  
lb/ft/inflashes. Then press S.  
If you do not want to store a reading when  
kg/cmflashes, press S and then º to turn  
off the analyzer. Otherwise, kg/cm  
continues to flash and consume battery  
power.  
If you want to change the measurement unit, remove the battery. Hold down S and reinstall the battery synchronously.  
Then, repeat these steps.  
To enter a profile, but not store it in the analyzer, select 0as the desired profile number in Step 2. If you do not press any  
key for about one minute, the analyzer automatically turns off.  
Step Two  
Removing the Protective Plastic  
Body Fat Types  
The display is protected by a piece of clear  
plastic. Peel off the plastic before using  
your analyzer.  
Underweight  
Healthy  
Slightly  
Overweight  
Overweight  
Obese  
Download from Www.Somanuals.com. All Manuals Search And Download.  

QSC Audio Stereo Amplifier SRA 1222 User Guide
Quantum Wheelchair 06 edge va User Guide
Radio Shack Two Way Radio 21 1901 User Guide
Raypak Swimming Pool Heater R185 User Guide
Ricoh Camcorder GR Digital II User Guide
Rotel Cassette Player RD845 User Guide
Samson Stereo Amplifier 115XL User Guide
Samsung Cell Phone 090308 User Guide
Sanyo Battery Charger NBL414 User Guide
Saturn Automobile 2006 Vue User Guide