Radio Shack DVD VCR Combo DVD VCR User Guide

16-3286

Owner’s Manual

Please read before using this unit.

DVD/CD Player with Video Cassette Recorder

INSTRUCCIONES EN ESPAÑOL INCLUIDAS.

Supplied Accessory

• Remote control

• RF cable

• Audio/Video cables

• Owner’s Manual

RadioShack.com are trademarks used by

RadioShack Corporation.

Owner's Manual

Table of Contents

■ Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Recording & OTR (One Touch Recording) . . . . . . . . . . . . . . . . 12

Timer Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Hints for OTR and Timer Recording . . . . . . . . . . . . . . . . . . . . . 13

Copying a Video Tape. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

■ MTS System (Multi-Channel Television Sound) . . . . . . . . . . . 14

When You Receive or Record a Program Broadcast in MTS . . . 14

When You Play Back a Tape Recorded in Hi-Fi Stereo . . . . . . . 14

Precautions

Laser Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

■ Important Safeguards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Installation Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Avoid the Hazards of Electrical Shock and Fire. . . . . . . . . . . . . . 4

Moisture Condensation Warning. . . . . . . . . . . . . . . . . . . . . . . . . 4

Notice for Progressive Scan Outputs . . . . . . . . . . . . . . . . . . . . . 4

About Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Symbols Used in This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

■ About the Video Cassettes and Discs . . . . . . . . . . . . . . . . . . . 5

Playable Video Cassettes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Unplayable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

DVD Functions

■ Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

■ On-Screen Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

■ Search Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Track Search / Title/Chapter Search / Time Search . . . . . . . . . 17

■ Marker Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

■ Repeat / Random / Programmed Playback . . . . . . . . . . . . . . 18

Repeat Playback / Repeat A-B Playback /

Random Playback / Programmed Playback. . . . . . . . . . . . . . . . 18

■ Special Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Subtitle Language / Audio Language / Camera Angle /

Black Level Setting / Stereo Sound Mode / Virtual Surround . . . . . . . 19

■ DVD Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

LANGUAGE Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

DISPLAY Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

AUDIO Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

PARENTAL Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

OTHERS Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Reset to the Default Setting (Except for PARENTAL Setting). . . 23

Setup

■ Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

RF Output Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Hint for Cable Box or Satellite Box . . . . . . . . . . . . . . . . . . . . . . . 6

Connection to an Audio System . . . . . . . . . . . . . . . . . . . . . . . . . 6

Connection to a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Front & Rear Terminals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

■ Preparation for Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Turn on the Unit for the First Time . . . . . . . . . . . . . . . . . . . . . . . 8

Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

■ Function Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Front Panel Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

VCR/DVD Switching. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Installing the Batteries for the Remote Control . . . . . . . . . . . . . 10

Information

■ Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

■ Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

■ Language List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

■ Limited Ninety-Day Warranty . . . . . . . . . . . . . . . . . . . . . . . . . 24

VCR Functions

■ Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

■ Other Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Index Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Time Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Auto Repeat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Español . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Quick Use Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Basic TV Connection

Cable TV Antenna

signal

Cable TV Antenna

signal

(Back of DVD/VCR)

(Back of TV)

outlets

(Back of TV)

ANT-IN

Plug in

ANT-OUT

Disconnect

Connect

From DVD/VCR

From TV

Connect

RF cable (supplied)

Please refer to “Connections” on page 6.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFEGUARDS

1. Read Instructions - All the safety and operating instruc-

tions should be read before the appliance is operated.

2. Retain Instructions- The safety and operating instructions

should be retained for future reference.

3. Heed Warnings - All warnings on the appliance and in

the operating instructions should be adhered to.

4. Follow Instructions - All operating and use instructions

should be followed.

proper grounding of the mast and supporting structure,

grounding of the lead-in wire to an antenna discharge

unit, size of grounding conductors, location of antenna-

discharge unit, connection to grounding electrodes, and

requirements for the grounding electrode. (Fig. A)

FIGURE A

ANTENNA

EXAMPLE OF ANTENNA GROUNDING

AS PER NATIONAL ELECTRICAL CODE

LEAD

WIRE

GROUND

CLAMP

5. Cleaning - Unplug this video product from the wall outlet

before cleaning. Do not use liquid cleaners or aerosol

cleaners. Use a damp cloth for cleaning.

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

EXCEPTION: A product that is meant for uninterrupted

service and, that for some specific reason, such as the

possibility of the loss of an authorization code for a CATV

converter, is not intended to be unplugged by the user

for cleaning or any other purpose, may exclude the refer-

ence to unplugging the appliance in the cleaning descrip-

tion otherwise required in item 5.

6. Attachments - Do not use attachments not recommend-

ed by the video product manufacturer as they may cause

hazards.

ELECTRIC

SERVICE

EQUIPMENT

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMP

NEC – NATIONAL ELECTRICAL CODE

S2898A

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

14. Lightning - For added protection for this video product

during a lightning storm, or when it is left unattended and

unused for long periods of time, unplug it from the wall

outlet and disconnect the antenna or cable system. This

will prevent damage to the video product due to lightning

and power-line surges.

15. Power Lines - An outside antenna system should not be

located in the vicinity of overhead power lines or other

electric light or power circuits, or where it can fall into

such power lines or circuits. When installing an outside

antenna system, extreme care should be taken to keep

from touching such power lines or circuits as contact with

them might be fatal.

16. Overloading - Do not overload wall outlets and extension

cords as this can result in a risk of fire or electric shock.

17. Object and Liquid Entry - Never push objects of any kind

into this video product through any openings as they may

touch dangerous voltage points or short-out parts that

could result in a fire or electric shock. Never spill liquid of

any kind on the video product.

18. Servicing - Do not attempt to service this video product

yourself as opening or removing covers may expose you

to dangerous voltage or other hazards. Refer all servicing

to qualified service personnel.

19. Damage Requiring Service - Unplug this video product

from the wall outlet and refer servicing to qualified ser-

vice personnel under the following conditions:

a. When the power-supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen into the

video product.

7. Water and Moisture- Do not use this video product near

water, for example, near a bath tub, wash bowl, kitchen

sink, or laundry tub, in a wet basement, or near a swim-

ming pool, and the like.

8. Accessories - Do not place this video product on an unsta-

ble cart, stand, tripod, bracket, or table. The video product

may fall, causing serious injury to a child or adult, and seri-

ous damage to the appliance. Use only with a cart, stand,

tripod, bracket, or table recommended by the manufactur-

er, or sold with the video product. Any mounting of the

appliance should follow the manufactur-

er's instructions and should use a

mounting accessory recommended by

the manufacturer. An appliance and cart

combination should be moved with care.

Quick stops, excessive force, and

uneven surfaces may cause the appli-

ance and cart combination to overturn.

9. Ventilation - Slots and openings in the cabinet are provided

for ventilation and to ensure reliable operation of the video

product and to protect it from overheating, and these open-

ings must not be blocked or covered. The openings should

never be blocked by placing the video product on a bed,

sofa, rug, or other similar surface. This video product

should not be placed in a built-in installation such as a

bookcase or rack unless proper ventilation is provided or

the manufacturer's instructions have been adhered to.

10. Power Sources - This video product should be operated

only from the type of power source indicated on the mark-

ing label. If you are not sure of the type of power supply to

your home, consult your appliance dealer or local power

company. For products intended to operate from battery

power, or other sources, refer to the operating instructions.

11. Grounding or Polarization - This video product is

equipped with a polarized alternating-current line plug (a

plug having one blade wider than the other). This plug will

fit into the power outlet only one way. This is a safety fea-

ture. If you are unable to insert the plug fully into the out-

let, try reversing the plug. If the plug should still fail to fit,

contact your electrician to replace your obsolete outlet.

Do not defeat the safety purpose of the polarized plug.

12. Power Cord Protection - Power supply cords should be

routed so that they are not likely to be walked on or

pinched by items placed upon or against them, paying

particular attention to cords at plugs, convenience recep-

tacles, and the point where they exit from the appliance.

13. Outdoor Antenna Grounding - If an outside antenna or

cable system is connected to the video product, be sure

the antenna or cable system is grounded so as to provide

some protection against voltage surges and built-up static

charges. Article 810 of the National Electrical Code,

ANSI/NFPA No. 70, provides information with regard to

c. If the video product has been exposed to rain or water.

d. If the video product does not operate normally by following

the operating instructions. Adjust only those controls that

are covered by the operating instructions as an improper

adjustment of other controls may result in damage and will

often require extensive work by a qualified technician to

restore the video product to its normal operation.

e. If the video product has been dropped or damaged in

any way.

f. When the video product exhibits a distinct change in per-

formance this indicates a need for service.

20. Replacement Parts - When replacement parts are

required, be sure the service technician has used

replacement parts specified by the manufacturer or have

the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric

shock or other hazards.

21. Safety Check - Upon completion of any service or repairs

to this video product, ask the service technician to per-

form safety checks to determine that the video product is

in proper operating condition.

22. Heat - This video product should be situated away from

heat sources such as radiators, heat registers, stoves, or

other products (including amplifiers) that produce heat.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation Location

Maintenance

For safety and optimum performance of this unit:

• Do not stand the unit up vertically. Install the unit in

a horizontal and stable position. Do not place any-

thing directly on top of the unit. Do not place the unit

directly on top of the TV.

• Shield it from direct sunlight and keep it away from

sources of intense heat. Avoid dusty or humid

places. Avoid places with insufficient ventilation for

proper heat dissipation. Do not block the ventilation

holes on the sides of the unit. Avoid locations sub-

ject to strong vibration or strong magnetic fields.

• Be sure to remove a disc and unplug the AC

power cord from the outlet before carrying the unit.

SERVICING

• Please refer to relevant topics on the “Troubleshooting

Guide” on page 23 before returning the product.

•

If this unit becomes inoperative, do not try to correct

the problem by yourself. There are no user-service-

able parts inside. Turn off, unplug the power plug, and

please consult with your local RadioShack store.

CLEANING THE CABINET

•

Use a soft cloth slightly moistened with a mild deter-

gent solution. Do not use a solution containing alco-

hol, spirits, ammonia or abrasive.

CLEANING DISCS

•

When a disc becomes dirty, clean it with a cleaning

cloth. Wipe the disc from the center to out. Do not

wipe in a circular motion.

Do not use solvents such as benzine, thinner, com-

mercially available cleaners, detergent, abrasive

cleaning agents or antistatic spray intended for ana-

log records.

Avoid the Hazards of Electrical Shock and Fire

• Do not handle the power cord with wet hands.

• Do not pull on the power cord when disconnecting it

from AC wall outlet. Grasp it by the plug.

•

• If, by accident, water is spilled on this unit, unplug

the power cord immediately and take the unit to

your local RadioShack store for servicing.

CLEANING THE DISC LENS

•

• Do not put your fingers or objects into the unit cas-

sette holder.

If this unit still does not perform properly although you

refer to the relevant sections and to “Troubleshooting

Guide” in this Owner’s Manual, the laser optical pick-

up unit may be dirty. Please consult with your local

RadioShack store for inspection and cleaning of the

laser optical pickup unit.

Moisture Condensation Warning

Moisture condensation may occur inside the unit

when it is moved from a cold place to a warm place,

or after heating a cold room or under conditions of

high humidity. Do not use this unit at least for 2 hours

until its inside gets dry.

DISC HANDLING

•

When you handle a disc, hold it by its edge and try

not to touch the surface of the disc.

Always store the disc in its protective case when it

is not used.

•

Notice for Progressive Scan Outputs

Consumers should note that not all high definition

television sets are fully compatible with this product

and may cause artifacts to be displayed in the picture.

In case of picture problems with 525 progressive scan

output, it is recommended that the user switch the

connection to the ‘standard definition’ output. If there

are questions regarding your TV set compatibility with

this 525p DVD player, please contact RadioShack

store.

AUTO HEAD CLEANING

•

Automatically cleans video heads as you insert or

remove a cassette, so you can see a clear picture.

Playback picture may become blurred or interrupted

while the TV program reception is clear. Dirt accu-

mulated on the video heads after a long period of

use, or the usage of rental or worn tapes can cause

this problem. If a streaky or snowy picture appears

during playback, the video heads in your unit may

need to be cleaned.

•

About Copyright

1. Please visit your local RadioShack store and pur-

chase a good quality VHS Video Head Cleaner.

2. If a Video Head Cleaner does not solve the prob-

lem, please consult with your local RadioShack

store.

Unauthorized copying, broadcasting, public perfor-

mance and lending of discs are prohibited.

This product incorporates copyright protection tech-

nology that is protected by U.S. patents and other

intellectual property rights. Use of this copyright pro-

tection technology must be authorized by Macrovision,

and is intended for home and other limited viewing

uses only unless otherwise authorized by Macrovision.

Reverse engineering or disassembly is prohibited.

Hint

• Remember to read the instructions along with the video head

cleaner before use.

• Clean video heads only when problems occur.

Note to CATV system installer

Symbols Used in This Manual

This reminder is provided to call the CATV system

installer’s attention to Article 820-40 of the NEC that

provides guidelines for proper grounding and, in par-

ticular, specifies that the cable ground should be

connected to the grounding system of the building,

as close to the point of cable entry as practical.

The following symbols appear in some head-

ings in this manual.

:Description refers to playback or recording

of video cassette tapes.

VCR

:Description refers to playback of DVD-

Video discs.

DVD-V

Manufactured under license from Dolby

Laboratories. “Dolby” and the double-D symbol

are trademarks of Dolby Laboratories.

:Description refers to playback of Audio

CDs.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

About the Video Cassettes and Discs

Playable Video Cassettes

Use only cassettes marked

with this unit.

Playable Discs

Recorded

signals

Playable

Mark (logo)

discs

Disc size

Disc types

Region code

DVD-Video

* 1, 2, 4, 6, 10

Example

12 cm

8 cm

Title 1

Title 2

Digital video

(MPEG2)

Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1

Chapter 2

DVD-RW

DVD-R

* 1, 3, 4, 5,

6, 7, 9, 10

Audio CD

* 4, 6, 10

Example

12 cm

Digital audio

Track 1

Track 2

Track 5

Track 6

Track 3

Track 4

CD-RW

CD-R

8 cm

* 4, 5, 6,

9, 10

is a trademark of DVD Format/Logo Licensing Corporation.

If you cannot play back a disc which bears one of the marks above, check the following notes.

*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back.

*2: Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc’s producers.

*3: Discs recorded in the VR (Video Recording) format cannot be played back.

*4: Scratched or stained discs may not be played back.

*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or spe-

cial properties of discs.

*6:You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not play them back.

Even if they are played back, the sound or video quality will be compromised.

*7:You may play back the unfinalized DVD-RW/R disc recorded in the video format on our brand’s DVD recorder. However,

depending on the recording status of a disc, the disc may not be played back at all or normally (the picture or sound may

not be smooth, etc.). In this case, you need to finalize the disc with the DVD recorder. Refer to the manual accompanying

the DVD recorder.

*8: Only the discs recorded in the video format and finalized can be played back.

Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not be played back at

all or normally (the picture or sound may not be smooth, etc.).

*9: If there is too much recording space left on a disc (the used portion is less than 55 mm across), it may not play back properly.

*10: Do not glue paper or put stickers on to the disc. These may damage the disc, and the unit may not read it correctly.

Unplayable Discs

NEVER play back the following discs. Otherwise, malfunction may result!

DVD-RAM / DVD-Audio / CD-i / Photo CD / Video CD / DVD with region codes other than 1 or ALL /

DTS-CD /

DVD-ROM for personal computers / CD-ROM for personal computers

On the following disc, the sound MAY NOT be heard.

Super Audio CD

NOTE: Only the sound recorded on the normal CD layer can be delivered.

The sound recorded on the high density Super Audio CD layer cannot be delivered.

Any other discs without compatibility indications

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Setup

Connections

Please refer to “Basic TV Connection” on the front page before you use this unit.

RF Output Channel

If channel 3 is already occupied for broadcasting,

1) Set your TV to channel 4.

2) Insert a pre-recorded tape into this unit.

5) After a few seconds, press and hold

Hint

[PLAY B] on the unit for 3 seconds.

•

The RF output channel does

not change when you adjust

tracking during playback. In case

RF output channel changes, you

can easily switch it back just

start the playback again then

•

The RF output channel will change to channel 4

from channel 3 and you will see a playback picture.

In this case, “ch04” will appears on the front panel.

3) Press [OUTPUT] on the unit so that the VCR

OUTPUT light is lit.

• When a picture does not appear on the TV

screen, repeat step 4).

•

If “VCR” light does not appear on the display of

this unit, press [VCR/TV] on the remote control.

press and hold [PLAY

the unit for 3 seconds.

] on

6) Press [STOP C] to stop playback.

4) Press [PLAY B] once.

Hint for Cable Box or Satellite Box

(Back of VCR/DVD)

Connection A

Connection B

(Cable box or

ANT-IN

Satellite box)

Antenna

OUT

ANT-OUT

Satellite

or Cable

TV signal

ANT-OUT

or Basic

RF cable

(supplied)

RF cable

(supplied)

CABLE

TV signal

(Back of TV)

Select this connection when you want to view or record a

scrambled channel. With this connection, channels cannot

be changed on the unit. You can view or record ONLY the

channels you have selected on the cable box or the satellite

box.

Select this connection when you want to change channels

on the VCR/DVD. With this connection, you may watch one

channel while recording another.

• You may not view or record a scrambled channel.

To select channels of the cable box or satellite box

• While you are recording, only the recorded channel can be

viewed.

1) At the cable box or satellite box, select channel 3 or 4 (the

same channel as the VCR/DVD’s RF output channel).

• Refer to “RF Output Channel”.

2) At the TV, select the same channel as the output channel

(3 or 4) of the cable box or satellite box.

3) Turn on the VCR/DVD by pressing [POWER], and then,

press [VCR/TV]. The “POWER” and “VCR” lights on the

front panel will appear. Then, select the channel you want

to view or record.

To select channels of the cable box or satellite box

1) Turn on the unit by pressing [POWER], then press

[VCR/TV].The “POWER” and “VCR” lights on the front

panel will appear, then press [SKIP/CH.

/ /

G K H L] to

select channel 3 or 4 (the same channel as the output

channel of the cable box or satellite box).

• If you use the channel 4, you need to change the unit’s

RF output to channel 4. Refer to “RF Output Channel”.

2) At the TV, select channel 3 or 4 (the same channel as you

have selected at step 1).

3) On the cable box or satellite box, select the channel you

want to view or record.

To playback a tape

Follow the steps 1) to 2) above. Then, playback a tape.

• Refer to “Playback” on page 11.

To view one channel while recording another

1) While you are recording on the VCR/DVD, press [VCR/TV]

so that the “VCR” light disappears on the VCR/DVD.

2) At the cable box, select the channel you want to view.

Connection to an Audio System

Dolby Digital decoder,

Stereo system

Method 1

Method 2

MD deck or DAT deck

COAXIAL

Analog audio

input jacks

Digital audio

input jack

AUDIO

Audio Coaxial

Digital cable

(commercially

available)

Audio cable

(supplied)

DVD

AUDIO S-VIDEO

OUT OUT

COMPONENT

DIGITAL

VIDEO OUT

DVD/VCR

AUDIO OUT

VCR

DVD

AUDIO S-VIDEO

OUT OUT

AUDIO OUT

COMPONENT

DIGITAL

VIDEO OUT

AUDIO OUT

DIGITAL

AUDIO OUT

(Analog)

AUDIO OUT

COAXIAL

DVD/VCR

SETUP QUICK

DOLBY DIGITAL

Setting

(DVD mode only)

Connection

Connecting to a Dolby Digital decoder

for Dolby Digital audio output.

Connecting to the other equipment (an MD deck

or DAT deck etc.) without Dolby Digital decoder.

Hint

BITSTREAM

• Playing a DVD using incorrect settings may generate

noise distortion and may also damage the speakers.

PCM

* To complete these settings, refer to pages 20-21.

Hint

•

The audio source on a disc in a Dolby Digital multi channel surround

format cannot be recorded as digital sound by an MD or DAT deck.

• By hooking this unit up to a Multi-channel Dolby Digital

decoder, you can enjoy high-quality Dolby Digital multi

channel surround sound as heard in the movie theaters.

• Playing a DVD using incorrect settings may generate

noise distortion and may also damage the speakers.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Connection to a TV

Method 1

Method 2

Method 3

Basic Audio

Good picture

Better picture

Best picture

COMPONENT

VIDEO IN

AUDIO IN

S-VIDEO IN

VIDEO IN

CB/PB

CR/PR

Audio cable

(supplied)

Video

cable

(supplied)

S-Video

cable

(commercially

Component Video cables

(commercially available)

available)

DVD

AUDIO S-VIDEO

OUT OUT

DVD/VCR

VCR

DVD

DVD/VCR

AUDIO OUT

VCR

DVD

COMPONENT

DIGITAL

COMPONENT

VIDEO OUT

DIGITAL

AUDIO OUT

AUDIO S-VIDEO

OUT OUT

VIDEO OUT

DIGITAL

AUDIO S-VIDEO

AUDIO OUT

OUT

AUDIO OUT

DVD

AUDIO S-VIDEO

OUT OUT

DVD/VCR

AUDIO OUT AUDIO IN

VCR

COMPONENT

VIDEO OUT

DIGITAL

AUDIO OUT

ANT-IN

P^B

COAXIAL

VIDEO OUT

VIDEO IN

ANT-OUT

P^R

COAXIAL

VIDEO OUT

P^R

(Analog) AUDIO OUT

VIDEO OUT

S-VIDEO OUT

COMPONENT VIDEO OUT

Hint

•

Connect this unit directly to the TV. If the Audio/Video cables are connected to a VCR, pictures may be distorted due to the copy protection system.

• The COAXIAL, DVD AUDIO OUT, S-VIDEO OUT and COMPONENT VIDEO OUT jacks are only useful in DVD mode.

If your TV is compatible with 525p (480p) progressive scanning and you want to enjoy that high

quality picture;

Set “PROGRESSIVE” to “ON” in the DISPLAY menu, so that the “P.SCAN” on the front panel display appears. Details are

on page 21.

If your TV is not compatible with progressive scanning;

Use this unit in interlace mode. Make sure

“

PROGRESSIVE

”

is set to “OFF” and P.SCAN light on the front of the unit is off.

Progressive scanning mode can be set to off either in the DISPLAY menu or by pressing and holding [PLAY B] on the front of

the unit for more than 5 seconds. Details are on page 21.

After you have completed connections

• Press the input selector button (usually TV/VIDEO, INPUT or AUX) on your TV to switch an appropriate external input

channel (usually near channel 0) for viewing the picture from this unit.

If the picture does not appear, also refer to the manual accompanying your TV.

Input modes for common TV brands (Example)

• Listed below are inputs for common brand name TV’s.

Admiral:

Curtis Mathis:

GE:

AUX

Panasonic:

RCA:

TV/VIDEO

LINE1, LINE2, 00, 90, 91, 92, 93

INPUT, TV/VCR, 00, 90, 91, 92, 93

Samsung:

Sanyo:

TV/VIDEO

Hitachi:

INPUT, AUX

VIDEO

JVC:

VIDEO, VIDEO1, VIDEO2, VIDEO3

Sharp:

Kenwood:

LXI-Series:

Magnavox:

AUX

Sony:

VIDEO1, VIDEO2, VIDEO3

Toshiba:

Zenith:

TV/GAME

AUX CHANNEL

Front & Rear Terminals

DVD AUDIO OUT (analog) jacks DVD/VCR AUDIO OUT jacks

AUDIO IN jacks

Connect the supplied audio

Connect an audio cable com-

ing from the audio out jacks of

cables here through the Audio cable here through the audio

ANT-IN jack

Connect your antenna

or cable box here.

In jacks of a television or other In jacks of a television or other a camcorder, another VCR or

audio equipment. (DVD only)

audio equipment.

an audio source here.

DVD

AUDIO S-VIDEO

OUT OUT

DVD/VCR

AUDIO OUT

DVD

VCR

AUDIO IN

DIGITAL AUDIO OUT COAXIAL jack

Connect an optional coaxial digital

audio cable here through the coaxial

digital audio in jack of a decoder or

audio receiver. (DVD only)

COMPONENT

VIDEO OUT

DIGITAL

ANT-IN

VIDEO

AUDIO

DVD/VCR

VCR

AUDIO OUT

COMPONENT

DIGITAL

AUDIO S-VIDEO

AUDIO OUT AUDIO IN

VIDEO OUT

OUT

ANT-IN

AUDIO OUT

P^B/

^COAXIALR ^R

VIDEO OUT

VIDEO IN

P^B/

ANT-OUT

P^R/

ANT-OUT

COAXIAL

VIDEO IN

P^R/

[Front

Panel]

[Rear Panel]

VIDEO IN jack

S-VIDEO OUT jack

Connect an optional

S-Video cable here

through the S-video

in jack of a televi-

sion. (DVD only)

ANT-OUT jack

Connect the

Connect a cable coming

from the video out jack of

a camcorder, another VCR

or an audio-visual source

(laser disc player, video

disc player, etc.) here.

supplied RF

COMPONENT VIDEO OUT jacks

Connect optional component

video cables here through the

component video in jacks of a

television. (DVD only)

DVD/VCR VIDEO OUT jack

Connect the supplied video

cable here through the TV’s

video in jack.

cable to the

antenna input

jack on your TV.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Preparation for Use

Turn on the Unit for the First

Time

To Add or Delete Channels

1) Press [MENU] until the main menu

appears.

CLOCK SET

MONTH DAY YEAR

1 0 0 2 – – – –

VCR

HOUR MINUTE AM/PM

– – – – – –

2) Select “CHANNEL SET UP” by

pressing [K/L]. Then, press [B].

3) Select “MANUAL SET UP” by

pressing [K/L]. Then, press [B].

4) Enter the desired channel number by

pressing [K/L] or

[SKIP/CH. G/KK H/LL].

5) Add or Delete it from memory by

pressing [s/B] so that “ADD” or

“DELETE” flashes on the TV screen

accordingly.

VCR

Select the current day.

Turn on the TV and set it

to channel 3.

• If channel 3 is already occupied for broadcasting,

see“RF Output Channel” section on page 6.

• If your antenna is connected to an antenna ampli-

fier, the amplifier’s gain adjustment may need to

be temporarily reduced in order for Auto-Setup to

program all channels properly.

CLOCK SET

MONTH DAY

1 0 0 2

YEAR

2 0 0 6

HOUR MINUTE

– – – –

AM/PM

– –

6) Exit the Preset mode by pressing

[CLEAR/C.RESET].

POWER

Remote Control TV Screen

Select the current year.

To Preset the Channel Again

LANGUAGE SELECT

1) Press [MENU] until the main menu appears.

B ENGLISH

FRANCAIS

ESPAÑOL

[ON]

2) Select “CHANNEL SET UP” by pressing

[K/L], then press [B].

CLOCK SET

3) Select “AUTO SET UP” by using [K/L],

then press [B]. After scanning, the tuner

stops on the lowest memorized channel.

MONTH DAY

YEAR

1 0 0 2 MON 2 0 0 6

HOUR MINUTE

0 5 – –

AM/PM

– –

To Change the On-Screen Language

1) Press [MENU] until the main menu appears.

Select the current hour.

2) Select “LANGUAGE SELECT” by pressing

[K/L], then press [B].

CH 01

3) Select “ENGLISH” , “FRANCAIS” or

“ESPAÑOL” by pressing [K/LL] , then press

[CLEAR/C.RESET] to exit.

AUTO SET UP

CLOCK SET

MONTH DAY

YEAR

Hint

1 0 0 2 MON 2 0 0 6

• If you accidentally select Spanish or French

and need English: Press [MENU] and

choose SELEC. IDIOMA or SELECTION

LANGUE. Press [B] and select ENGLISH.

Finally, press [CLEAR/C.RESET].

HOUR MINUTE

0 5 4 0

AM/PM

– –

Do you connect the cable from the cable box or

the satellite box to the unit’s ANT-IN jack?

YES

Select the current minute.

• To add or delete channels in this unit,

[SKIP/CH.

/ /

G K H L] button works on

Yes Press [MENU]

the channel number memorized in this

unit,

L] works on all.

to exit.

[

•

Refer to “Hint for Cable Box or

Satellite Box” section on page 6.

CLOCK SET

Clock Setup

MONTH DAY

YEAR

1 0 0 2 MON 2 0 0 6

VCR

No Please wait for a few minutes.

HOUR MINUTE

0 5 4 0

AM/PM

P M AM

B PM

After scanning...

VCR

•

The tuner stops on the lowest memorized channel.

You can select only the channels memorized

- M E N U -

TIMER PROGRAMMING

AUTO REPEAT [OFF]

CHANNEL SET UP

B CLOCK SET

LANGUAGE SELECT

AUDIO OUT

TV STEREO

SAP

in this unit by using [SKIP/CH.

(or [CHANNEL

/ /

G K H L]

Select “AM” or “PM”.

L]).

• If "AUTO SET UP" appears on the TV

screen again, check the cable connections.

To exit the CLOCK SET

screen

[ON]

Then, press [B] once again.

• If the clock is not set, the

CLOCK SET screen

appears when you press

[MENU]. In this case, go

to step 2).

Hint

• Repeat these steps only if either there

was a power failure or this unit has been

unplugged for more than 30 seconds.

Hint

To Select a Channel

You can select a channel by using

the Number buttons or

[SKIP/CH. G/K H/LL].

Notes for using the Number buttons:

• When selecting cable channels which

are higher than 99, enter channel

numbers as a three-digit number. (For

example: 117, press [1], [1], [7])

• You must precede single-digit chan-

nel numbers with a zero (for example:

02, 03, 04 and so on).

• To go back one step, press [s] (during

steps 2) to 7) ).

• Your clock setting will be lost if either there

is a power failure or this unit has been

unplugged for more than 30 seconds.

CLOCK SET

MONTH DAY

1 0 – –

YEAR

– – – –

HOUR MINUTE AM/PM

– – – – – –

Select the current month.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Function Overview

Front Panel Display

Lights up when power is on.

DVD output mode

DVD-V

Lights up when the

A-B repeat function

is on.

Displays a type of the disc

which is inserted on the tray.

• DVD: DVD disc

OPEN/CLOSE

POWER

• CD: Audio CD

STOP/EJECT

PLAY

STOP

PLAY

Lights up when the

progressive scan

system is activated.

CHANNEL

VCR OUTPUT DVD

Lights up when the

repeat function is on.

VIDEO

AUDIO

REW F.FWD

REC/OTR

P.SCAN

DVD

Lights up when

the ALL repeat

function is on.

Displays how long the current title

or track has been played back. When

a chapter or track is switched, the

number of a new title, chapter or

track is displayed.

Lights up when the

inserted disc comes

to a pause.

No disc inserted

/ cannot read disc

Lights up when the inserted

disc is being played back.

Lights up when playing back

in slow mode. (DVD)

Opening the tray

VCR output mode

VCR

Closing the tray

Loading the disc

*Lights up

*Lights up when

Lights up when

when a tape is

the timer recording or an

OTR recording has been set.

the VCR/DVD is

in VCR position.

This light does not

appear when the

VCR/DVD is in

TV position.

in the VCR/DVD.

Lights up during

playback when

the repeat function

is on.

*Lights up during a recording.

Flashes when a recording

is paused.

When a disc or tape is

being played back

VCR

REC

Lights up when

the playback is

in still or slow mode.

Lights up when

current time is P.M.

Works as a tape counter(hour,minute,second).

Also displays a channel number,

tape speed, remaining time for OTR or

current time.

Lights up when the inserted

cassette is being played

back.

and

mark will disappear when you set VCR/DVD in DVD

mode. However, the function indicated by each mark is still working.

VCR/DVD Switching

Because this product is a combination of a VCR and

a DVD player, you must select first which compo-

nent you wish to operate with [OUTPUT].

OPEN/CLOSE

POWER

OPEN/CLOSE

POWER

/EJECT

SPEED

AUDIO

STOP/EJECT

PLAY

STOP

PLA

CHANNEL

VCR OUTPUT DVD

VIDEO

AUDIO

REW

F.FWD

REC/OTR

SKIP/CH.

VCR/TV

SLOW

VCR MODE

Press [VCR] on the remote control.

(Verify that the VCR OUTPUT light is lit.)

VCR button

DVD button

+1 0

DISPLAY

VCR

DVD

PAUSE

PLAY

STOP

DVD MODE

VCR OUTPUT light

DVD OUTPUT light

OUTPUT button

REC/OTR

Press [DVD] on the remote control.

ENTER

VCR OUTPUT DVD

(Verify that the DVD OUTPUT light is lit.)

SETUP TOP MENU

RETURN

MODE

CLEAR/

C. RESET

MODE

ZOOM

SUBTITLE

T-SET

ANGLE

REPEAT

A-B

Hint

• Pressing only [OUTPUT] on the front panel DOES NOT

switch the mode of the remote control. You MUST select

the correct mode on the remote control.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Control

VCR mode

DVD mode

Disc/Tape

OPEN/CLOSE

₍B_Au_lpt_ht_ao_bn_{etical order)}

POWER

/EJECT

SPEED

AUDIO

•To select channel.

•The +10 button has no effect

in VCR mode.

•To select chapter or title

SKIP/CH.

•To select track directly.

directly.

VCR/TV

SLOW

+1 0

•To search forward/backward

through a disc.

•To begin slow forward/

reverse playback during the

pause mode.

VCR

+1 0

DVD

DISPLAY

PAUSE

•To search forward/backward

•To forward/backward a tape.

through a disc.

PLAY

STOP

•To select an item

on the VCR Menu.

•To advance to the

next VCR Menu.

•To go back one step

during clock and

timer setting.

REC/OTR

ENTER

•To move the cursor and

ENTER

determine its position.

SETUP TOP MENU

RETURN

MODE

CLEAR/

C. RESET

MODE

ZOOM

A-B

SUBTITLE

T-SET

•To repeat between your

ANGLE

REPEAT

A-B

chosen point A and B.

ANGLE

AUDIO

•To select camera angles on

a disc.

•To select audio languages on •To select STEREO,

a disc.

L-ch or R-ch.

•To clear the markers.

•To remove status number in

program input.

•To clear the markers.

•To clear the numbers

entered incorrectly.

•To cancel the point for A-B

repeat.

CLEAR/

C. RESET

•To exit the VCR Menu.

•

To clear the numbers entered

incorrectly.

•To reset the tape counter.

Installing the Batteries

for the Remote Control

•To cancel the point for A-B

repeat.

DISPLAY

DVD

•To display the current disc

•To display the current time,

Install two AA batteries (commer-

cially available) matching the polar-

ity indicated inside battery com-

partment of the remote control.

mode.

tape counter, and channel.

• To select the DVD output

mode.

• To activate the remote

control in DVD mode.

•To select the DVD output

mode.

•

To activate the remote control

in DVD mode.

MODE

•To call up the Menu

•To call up the VCR Menu.

on a disc.

•To arrange the playing

•To set black level on/off.

order or play randomly.

•To set virtual surround on/off.

•

To set virtual surround on/off.

OPEN/CLOSE

/EJECT

•To eject the video cassette

from the cassette

compartment.

•To open or close the disc

tray.

• To pause tape playback or

PAUSE

•To pause disc playback.

•To advance playback

one frame at a time.

recording.

• To pause disc playback.

•To advance playback

one frame at a time.

• To begin disc playback.

•To begin tape playback.

PLAY

POWER

•To turn the unit on or off.

REC/OTR

•To start a recording or

One Touch Recording.

REPEAT

RETURN

•To play a chapter or title

•To play a track or disc

repeatedly.

•To return to the previous

operation in menu.

Keep in mind the following when using

the remote control:

Make sure that there is no obsta-

cle between the remote control

and the remote sensor on the unit.

MODE

•To search track.

•

To search chapter, title or time.

To set or search the markers.

•To call up the index or time

•To search time.

•

search menu.

•

To set or search the markers.

SETUP

•To call up the DVD setup

menu.

• The maximum operable ranges

from the unit are as follows.

- Line of sight: approx. 23 feet (7m)

- Either side of center:

approx. 16 feet (5m) within 30°

- Above: approx. 16 feet (5m)

within 15°

•To change channels.

•To adjust the tracking

manually during playback.

SKIP/CH.

• To skip chapters or titles.

• To skip tracks.

SLOW

•To view the tape in slow

motion.

SPEED

STOP

•To select the recording

speed.

- Below: approx. 10 feet (3m)

within 30°

• To stop playback.

•

To stop playback or recording.

SUBTITLE

T-SET

OPEN/CLOSE

•To put the VCR into standby

POWER

•To select subtitles on a disc.

STOP/EJECT

PLA

STOP

PLA

CHANNEL

DVD

VIDEO

AUDIO

mode for a Timer Recording.

REW

F.FWD

REC/OTR

TOP MENU

VCR

•To call up the Top Menu

on a disc.

•To select the VCR output

mode.

•To activate the remote

control in VCR mode.

Hint

VCR/TV

ZOOM

•To select DVD position or

•To select CD position or TV •To select VCR position or

position. TV position.

TV position.

• Do not mix alkaline and manganese

batteries.

•To magnify part of a picture.

(x2/x4)

• Do not mix old and new batteries.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

VCR Functions

Playback

Before:

Turn on the TV and set it to

channel 3.

OPEN/CLOSE

POWER

/EJECT

4 3

SPEED

AUDIO

•

If channel 3 is already occupied for broadcasting,

see “RF Output Channel” on page 6.

SKIP/CH.

VCR

VCR/TV

SLOW

VCR

POWER

+1 0

DISPLAY

VCR

DVD

PAUSE

To start

playback

STOP/EJECT

PLAY

VIDEO

AUDIO

REW F.FWD

REC/OTR

PLAY

STOP

REC/OTR

To stop

playback

To eject the

cassette

OPEN/CLOSE

/EJECT

Hint

STOP

• When a tape without record tab is inserted, the unit will start playback automatically.

• Tracking will be automatically adjusted upon playback. To adjust the tracking manually, press

[SKIP/CH. GG/KK H/L] (or [CHANNEL KK/LL]).

Other Operations

To cue or review picture during playback

Counter Reset

Hint

(Picture Search)

Press [gg / h]([F.FWD gg] or [REW hh] ).

• Press it again and the unit will search in super high

speed (in the SLP mode only).

Press [CLEAR/C.RESET].

•

Still/Slow mode

will be automati-

cally canceled

To play back in slow motion (Slow mode)

after 5 minutes to

prevent damage

to the tape and

the video head.

Press [SLOW] during playback or the still mode.

• If the noise bars appear on the TV screen, you can

reduce it by pressing [SKIP/CH. G/KK H/L](or

[CHANNEL K/L]).

To freeze the picture on TV screen during play-

back (Still mode)

• To return to play-

back from the

Picture

Press [PAUSE kk]. Each time you press the button,

Auto Rewind

the picture will be forwarded by one frame.

•

If the picture begins to vibrate vertically during the still

mode, stabilize the picture by pressing

When a tape reaches its end during playback, fast-for-

ward or recording (except Timer Recording and One

Touch Recording), the tape will automatically rewind

to the beginning. After rewinding finishes, the unit will

eject the tape.

Search/Still/

Slow mode,

[SKIP/CH.

K H

L] (or [CHANNEL

K L]).

press [PLAY B].

• If the picture is distorted or rolling vertically, adjust

the vertical hold control on your TV if equipped.

Hint

Index Search

Time Search

• The Index Mark will be made automatically

at the beginning of each recording.

• The time gap between Index Marks should

be greater than 1 minute for SP mode, 2

minutes for LP mode and 3 minutes for

SLP mode.

• Index Search and Time Search functions

are not available during recording.

• Press [STOP C] to stop the search.

You can skip the program backward You can search backward and for-

and forward by the Index Mark.

ward a specific length of time on a

VCR

tape.

VCR

• Insert a tape into this unit.

MODE

INDEX SEARCH

– –

MODE

TIME SEARCH

– : – –

• If a tape ends during a search, your

search will be canceled and the tape will

rewind to the beginning.

Press once.

Press twice.

INDEX SEARCH

0 3

Select the desired length of

time for fast forwarding or

rewinding.

01 ~ 20

TIME SEARCH

CURRENT PROGRAM

2 : 5 0

Beginning

of the tape

End of

the tape

Pro.1 Pro.2 Pro.3 Pro.4 Pro.5

02 01 01 02 03

INDEX MARK

0:01~ 9:59

(1 minute~9 hours

and 59 minutes)

To rewind

To fast forward

After searching,

PLAYB

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Auto Repeat

This function will playback a tape

repeatedly from the beginning

- M E N U -

TIMER PROGRAMMING

B AUTO REPEAT [ON]

CHANNEL SET UP

CLOCK SET

TIMER PROGRAMMING

B AUTO REPEAT [OFF]

CHANNEL SET UP

CLOCK SET

when the tape reaches to the end.

VCR

LANGUAGE SELECT

AUDIO OUT

LANGUAGE SELECT

AUDIO OUT

VCR

TV STEREO

SAP

[ON]

TV STEREO

SAP

[ON]

Hint

•

To cancel Auto Repeat, follow step 1) above. Then, press [B], so that [OFF] appears beside AUTO REPEAT. Press [CLEAR/C.RESET] to exit.

If menu remains on the TV screen at step 2), press [CLEAR/C.RESET] to exit.

The Auto Repeat playback will start automatically if you set “AUTO REPEAT” to “ON” in the stop mode.

Recording

Recording & OTR (One Touch Recording)

Before:

5 6

Turn on the TV and set it to

channel 3.

• If channel 3 is already occupied for

broadcasting, see “RF Output Channel” on page 6.

OPEN/CLOS

OPEN/CLOSE

/EJECT

POWER

SPEED

AUDIO

POWER

VCR

SKIP/CH.

STOP/EJECT

PLAY

CHANNEL

VIDEO

AUDIO

REW F.FWD

REC/OTR

VCR/TV

SLOW

VCR

+1 0

DVD

SKIP/CH.

DISPLAY

PAUSE

PLAY

• Select the chan-

nel to record.

STOP

Accidental erasure prevention

To prevent accidental recording on a

recorded cassette, remove its record tab.

To record on it later, cover the hole with

adhesive tape.

with tab

REC/OTR

Tape Speed

Recording/Playback Time

ENTER

Type of tape

SP mode

T60

1hour

3hour

T120

2hours

6hour

T160

2-2/3hours

8hour

SPEED

SETUP TOP MENU

RETURN

SLP mode

MODE

CLEAR/

C. RESET

MODE

ZOOM

Record tab

• Select the desired

tape speed.

You CANNOT copy a DVD to a videotape.

REC/OTR

To stop recording temporarily (Pause mode)

REC

Press [PAUSE k].

• During the rec-pause mode, five

represents one minute.

marks appear on the TV screen. Each

mark

Press [REC/OTR] repeatedly to select the

desired recording length.

• Press it again to resume recording.

REC

OTR(0:30)

OTR(1:00).....

(Normal recording)

• Pause mode will be automatically canceled after 5 minutes to prevent damage to

the tape and the video head.

OTR(8:00)

OTR(7:30)

Hint

OPEN/CLOSE

/EJECT

STOP

• If you want to watch one channel while recording another...

1) Press [VCR/TV] to put the unit in TV position.

2) Select a channel you want to watch with the cable box or the satellite box.

Timer Recording

•Insert a tape with its record tab

Select the desired month.

PROGRAM NUMBER

DATE – – / – –

START TIME – – : – – – –

END TIME – – : – – – –

into the unit.

ONE TIME PROGRAM

VCR

PROGRAM NUMBER

DATE 1 0 / 2 3 MON

START TIME – – : – – – –

END TIME – – : – – – –

VCR

CHANNEL

– –

REC SPEED – –

- M E N U -

CHANNEL

– –

Select an empty program number.

REC SPEED – –

B TIMER PROGRAMMING

AUTO REPEAT [OFF]

CHANNEL SET UP

CLOCK SET

LANGUAGE SELECT

AUDIO OUT

TV STEREO

SAP

Select the desired day.

[ON]

• You can program one

year in advance.

PROGRAM NUMBER

B ONCE

DAILY

TIMER PROGRAMMING

WEEKLY

PROG

12345678

DATE

Select “ONCE”, “DAILY”

(Mon-Fri), or “WEEKLY”.

START TIME

END TIME

CHANNEL

Available program num-

REC SPEED

ber flashes.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

ONE TIME PROGRAM

PROGRAM NUMBER

•

The VCR/DVD will change to

the DVD mode. Turn off the

unit when you do not use the

DVD functions. When you turn

Select the desired start time

SUBTITLE

T-SET

(hour).

DATE

1 0 / 2 3 MON

START TIME 0 7 : 3 0 PM

END TIME 0 8 : 3 0 PM

ONE TIME PROGRAM

PROGRAM NUMBER

CHANNEL

1 6

off the VCR/DVD,

will

DATE 1 0 / 2 3 MON

START TIME 0 7 : 3 0 – –

END TIME – – : – – – –

REC SPEED – –

appear in the front panel dis-

play. In some occasions, how-

ever, the VCR/DVD may be

automatically turned off,

instead of changing to the

DVD mode after pressing

[SUBTITLE/T-SET].

CHANNEL

– –

Select the desired channel.

REC SPEED – –

• If you have connected the unit to a

cable box or satellite box as the

Connection on page 6, select the VCR

to channel 3 or 4 (the RF output chan-

nel of the VCR). Then, select the

desired channel at the cable box or

satellite box. Leave the cable box or

satellite box on for timer recording.

Select the minute.

•

To use the VCR after Timer

Recording finishes normally,

press [SUBTITLE/T-SET]

Hint

• To go back one step, press [s] (during

steps 3) to 9) ).

To Check, Correct or Cancel a

Timer Program

1) Press [SUBTITLE/T-SET] then,

[VCR] on the remote control.

2) Select main menu by pressing [MENU].

3) Select “TIMER PROGRAMMING”

by pressing [K/L]. Then, press [B].

4) Select the program number which you

want to check by pressing [K/L]. The

details of the program you selected

will appear on the TV screen.

ONE TIME PROGRAM

PROGRAM NUMBER

DATE

ONE TIME PROGRAM

PROGRAM NUMBER

1 0 / 2 3 MON

START TIME 0 7 : 3 0 PM

END TIME 0 8 : 3 0 PM

DATE

1 0 / 2 3 MON

CHANNEL

1 6

START TIME 0 7 : 3 0 PM

END TIME – – : – – – –

REC SPEED SP

BSP

SLP

CHANNEL

– –

REC SPEED – –

B PM

Select the desired recording speed.

• To set another program after step 9),

press [B]. Then, continue with step 2).

Select “AM” or “PM”.

• Go to the digit you want to change

by pressing [s/B]. Then, enter cor-

rect numbers by pressing [K/L].

• You may cancel the entire program

by pressing [s] while the program

number flashes.

5) Press [CLEAR/C.RESET] to exit.

6) Press [SUBTITLE/T-SET] to return

to timer stand-by mode.

CLEAR/

C. RESET

Repeat the procedure in steps

5) and 6) to set the end time.

To cancel a Timer Recording

in progress

Press [STOP/EJECT C/A] on the unit.

Hints for OTR and Timer Recording

• Press

[VCR] on the remote control before you set Timer Recording. Make sure the remote control is in the VCR mode, then press

[SUBTITLE/T-SET].

• If a tape is not in the unit or does not have the record tab, the

light flashes and Timer Recording cannot be performed. Please insert a

recordable tape.

• When Timer Recordings are set, the

so that the light disappears. Press

features as described in this manual.

light will appear. To use the VCR as usual until the time for the recording, press

VCR/TV] to choose the VCR position. Select either VCR or DVD mode, then continue with the other

[SUBTITLE/T-SET]

[

After an OTR and a Timer Recording has been set, this unit operates as follows:

• If a tape runs out before an OTR or a Timer Recording is finished, the unit ejects the tape. Press

[

SUBTITLE/T-SET] on the remote control or

OUTPUT] on the front

[STOP/EJECT] on the unit, then press [VCR] to

[

STOP/EJECT] on the unit, then press [VCR] to activate the VCR function again.

• Once the unit turns to the timer standby mode, no VCR functions are available until

panel and VCR] on the remote control will not function.)

[

SUBTITLE/T-SET] is pressed. ([

[

• To cancel the timer standby mode, press

[SUBTITLE/T-SET] on the remote control or

activate the VCR function again.

• The mode of the unit and the remote control may differ (VCR mode or DVD mode) when you set Timer Recording or after you canceled Timer

Recording. Press [VCR] or [DVD] on the remote control to select your desired mode before you operate.

• Once the unit switches to the DVD mode, all the VCR function will be unavailable. “ ” will not appear as long as the DVD is in use. All the

DVD functions are available during OTR, timer standby mode and Timer Recording.

When an OTR or a Timer Recording is completed...

• If Auto Power Off for DVD has been activated and there are Timer Recordings on standby, the unit turns off automatically, and the

light

appears to indicate the unit is in the timer standby mode.

• The

light flashes if there are no more Timer Recordings on standby.

• If Auto Power Off for DVD has NOT been activated, the unit switches to the DVD mode and all the VCR function will be unavailable. The

light will not appear as long as the DVD is in use. All the DVD functions are available during OTR, timer standby mode and Timer Recording.

• Press

Press [OUTPUT] on the front panel or [VCR] on the remote control to use the VCR when the unit is on. In case Timer Recording is in standby

mode, press STOP/EJECT C/A] on the front panel or SUBTITLE/T-SET] on the remote control, and then press [OUTPUT] on the front panel

or [VCR] on the remote control.

If you want to use the DVD function during a timer recording or while the

• Press POWER] to turn on the VCR/DVD. Press DVD] on the remote control to choose DVD mode, then continue with the other DVD features

[STOP/EJECT C/A] on the front panel or

[SUBTITLE/T-SET] on the remote control to use the VCR when the unit is off.

•

[

light is on or blinking.

[

as described in this manual.

Note (for Timer Recording) :

• If there is a power failure or the unit is unplugged for more than 30 seconds, clock and all timer settings will be lost.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Copying a Video Tape

Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws.

(Back of another source)

(Back of TV)

(Back of Recording DVD/VCR*)

AUDIO OUT

Connect

DVD

AU-VIOIDEO

DVD/VCR

AUDIO OUT

VCR

AUDIO IN

COMPONENT

VIDEO OUT

DIGITAL

AUDIO OUT

OU UT

ANT-IN

Connect

P^B/

COAXIAL

VIDEO OUT

VIDEO IN

ANT-OUT

P^R/

RF cable

(supplied)

*Front input jacks are also available

Audio/Video cables

(commercially available)

1) Insert a pre-recorded tape into the playing VCR.

2) Insert a tape with its record tab into the recording unit.

3) Press [SPEED] on the remote control of the recording unit to select the desired recording speed (SP/SLP).

4) Select the “L1”or “L2” position on the recording unit.

• To use the input jacks on the back of this unit, select “L1” position by pressing [0], [0], [1] on the remote control or

[CHANNEL K/L].

• To use the input jacks on the front of this unit, select “L2” position by pressing [0], [0], [2] on the remote control or

[CHANNEL K/L].

5) Press [REC/OTR] on the recording unit.

6) Begin playback of the tape in another source.

7) To stop recording, press [STOP/EJECT C/AA] on the recording unit, then stop playback of the tape in another source.

Hint

• For best results during dubbing, use the front panel controls whenever possible. The remote control might affect another source’s operation.

• Always use video-quality shielded cables with RCA-type connectors. Standard Audio cables are not recommended.

• You can use a video disc player, satellite receiver or other Audio/Video component with Audio/Video outputs.

• “L1” or “L2” is found before the lowest memorized channel. (Example: CH02)

• “L2” input jacks are on the front of this unit.

MTS System (Multi-Channel Television Sound)

When You Receive or Record a Program Broadcast in MTS

•

When you receive a broadcast on the

VCR, you can check the type of the

broadcast by pressing [DISPLAY].

When “TV STEREO” or “SAP” selec-

tion is valid, select them by following

the steps below. This selection is

needed when you record the program.

SAP means Second Audio Program

(usually second language).

VCR

To exit the menu

VCR

CLEAR/

C. RESET

- M E N U -

TIMER PROGRAMMING

AUTO REPEAT [OFF]

CHANNEL SET UP

CLOCK SET

LANGUAGE SELECT

AUDIO OUT

•

B TV STEREO

[ON]

SAP

Select “TV STEREO”

or “SAP”.

Display on the

TV screen

Type of

TV STEREO/SAP

Selection

broadcast

Regular

(monaural audio)

-None-

-Invalid-

Stereo

broadcast

STEREO

TV STEREO

(main audio program)

Bilingual

broadcast

SAP

(second audio program)

TV STEREO

(stereo main audio program)

Stereo &

Bilingual

broadcast

STEREO

SAP

(second audio program)

When You Play Back a Tape Recorded in Hi-Fi Stereo

VCR

• If you have connected a stereo

TV to this unit, select “HIFI”.

• If you have connected a monaur-

al TV to this unit, select “MONO”.

AUDIO OUT

[ON]

VCR

B HIFI

- M E N U -

MONO

TIMER PROGRAMMING

AUTO REPEAT [OFF]

CHANNEL SET UP

CLOCK SET

Your Selection

HIFI

MONO

Monaural

L+R

LANGUAGE SELECT

B AUDIO OUT

L-channel

R-channel

Type of recorded tape

non Hi-Fi tapes

Monaural

Select “HIFI” or “MONO”.

TV STEREO

SAP

[ON]

Hi-Fi tapes

recorded in

Hi-Fi stereo

To exit the menu

Hi-Fi tapes

recorded main

audio program

CLEAR/

C. RESET

Main audio

program

Main audio

program

Main audio

program

Hi-Fi tapes

recorded second

audio program

Second audio Second audio Second audio

program program program

–

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Functions

Operations described after this section are mainly based on the remote control use. Some operations can be carried out on main unit.

Playback

Before: Turn on the TV, amplifier and any other components which are connected to this unit. Make sure the TV and audio

receiver (commercially available) are set to the correct channel.

4 3

DVD

DVD-V

OPEN/CLOSE

POWER

OPEN/CLOSE

/EJECT

POWER

SPEED

AUDIO

STOP/EJECT

PLAY

STOP

PLAY

CHANNEL

VCR OUTPUT DVD

VIDEO

AUDIO

REW F.FWD

REC/OTR

SKIP/CH.

OPEN/CLOSE

/EJECT

POWER

VCR/TV

SLOW

VCR

+1 0

DVD

Hint

DISPLAY

PAUSE

Insert a disc with

label facing up.

• A “prohibited icon” may appear at the top-right on the TV screen

when the operation is prohibited by the disc or this unit.

• Some DVDs may be played from title 2 or 3 due to specific pro-

grams.

• During the playback of a two-layered disc, pictures may stop for a

moment. This happens while the 1st layer is being switched to the 2nd

layer. This is not a malfunction.

PLAY

STOP

REC/OTR

To start

To stop

ENTER

playback

STOP

PLAY

TIP:

You can change the on-screen language for DVD function in

“PLAYER MENU” setting. (Refer to page 20.)

DVD menu

Fast Forward/Reverse Search

DVD

Some discs contain menus which allow you to customize

DVD playback. Press [K / L / s / B] to select an item, then

press [ENTER] (or [PLAY B]).

DVD-V

Press [h] or [gg] repeatedly during playback

to select the required forward or reverse speed.

To continue playback, press [PLAY B].

Calling up a Menu Screen during Playback

• Press [MENU] to call up the DVD menu.

• Press [TOP MENU] to call up the title menu.

Hint

•

For DVDs, fast forward or reverse search speed is different depending

on the disc. Approximate speed is 1(x2), 2(x8), 3(x20), 4(x50), 5(x100)

• For Audio CDs, approximate speed is 1(x2), 2(x8), 3(x30).

Hint

• Menu operations may vary depending on the disc. Refer to the

manual accompanying the disc for details.

Slow Forward/Slow Reverse

DVD

DVD-V

Resume

Press [h] or [g] repeatedly during the pause

mode to select the required forward or reverse speed.

To continue playback, press [PLAY B].

DVD

DVD-V

Press [STOP C] during playback.

Resume message will appear on

the TV screen.

Hint

Resume ON

• Slow forward or reverse speed is different depending on the disc.

Approximate speed is 1(1/16), 2(1/8), 3(1/2).

Press 'PLAY' to play from here.

To play the beginning,

press 'STOP' first and then 'PLAY'.

Press [PLAY B], playback will

resume from the point at which

playback was stopped.

• Set “STILL MODE” to “FIELD” in the DISPLAY menu if pictures in

the slow playback mode are blurred. (Refer to pages 20-21.)

Zoom

DVD

DVD-V

Hint

1) Press [ZOOM] during playback.

2) Press [ZOOM] repeatedly to select the required zoom

factor: x2, x4 or OFF.

• To cancel resume, press [STOP C] one more time during the Stop

mode.

• The resume information stays on even when the power is turned off.

Paused and Step-by-Step Playback

DVD

3) Press [K / L / s / B] to slide the zoomed picture across

the screen.

DVD-V

Press [PAUSE k] during playback.

To continue playback, press [PLAY B].

4) To exit zoom mode, press [ZOOM] to select OFF.

Hint

• Zooming function does not work while the disc menu is showing up.

• x4 zoom is not available on some discs.

DVD-V

• The picture may be distorted when you press [PAUSE F], [D] or

[E] repeatedly in the zoom mode.

The disc goes forward by one frame each time [PAUSE k] is

pressed during the pause mode.

To continue playback, press [PLAY B].

• In the zoom mode, it automatically changes

zoomed position guide.

x2(x4) to the

Hint

• On DVDs, set “STILL MODE” to “FIELD” in the DISPLAY menu if pictures in the

pause mode are blurred. (Refer to pages 20-21.)

–

Download from Www.Somanuals.com. All Manuals Search And Download.

On-Screen Display

You can check the information about the current disc by pressing [DISPLAY] on the remote control.

DVD

DVD-V

DISPLAY

Angle icon appears only when avail-

able on the DVD

Current playback status

DISPLAY

4/12 0:03:21 - 0:02:15

Current playback status

Remaining time of the current track

Elapsed time of the current track

TR(Track):

Current track number / Total tracks

11/16 0:00:00 - 0:03:30

Remaining time of the current chapter

Elapsed time of the current chapter

DISPLAY

ALL:

CH(Chapter):

Current chapter number / Total chapters

Current track number / Total tracks

4/12 0:13:45 - 0:45:40

DISPLAY

Current repeat setting appears only

when the repeat setting is active

T: Track repeat

A: All Tracks repeat

1/3 0:00:00 - 1:23:45

B: A-B repeat

Remaining time of the current title

Elapsed time of the current title

Remaining time of the entire disc

Elapsed time of the entire disc

DISPLAY

TT(Title):

Current title number / Total titles

DISPLAY

Hint

• When you are playing a disc in PROGRAM or RANDOM mode,

Layer numbers, appears only when

playing a two-layered disc

L0: Layer 0 is playing

PROGRAM (or RANDOM) will be displayed instead of

L1: Layer 1 is playing

Current repeat setting appears only

when the repeat setting is active

C: Chapter repeat / T: Title repeat /

B: A-B repeat

BIT RATE: The amount of audio and

video data currently being read

DISPLAY

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Search Function

Track Search

Title / Chapter Search

Time Search

DVD

DVD-V

Using [SEARCH MODE]

PLAY

TOTAL 1:29:00

MODE

PLAY

/12

/29

MODE

Press repeatedly until

the Time Search dis-

play appears.

Press once for the

MODE

Chapter Search.

Press twice for the

Title Search.

/29

TOTAL 1:29:00

+1 0

within 30 seconds

/12

within 30 seconds

• For the disc with less than 10 tracks,

press the track number directly.

For discs with more than 10 but less than 99

tracks, to play a single-digit track, press [0]

first, then the track number (e.g. for track 3,

press [0], [3]). To play a double-digit track,

press the track number.

+1 0

within 30 seconds

•

Hint

• When there is no need to enter a number,

“0” appears automatically.

G K H L

Using [SKIP/CH.

]

G K

For example, “0: 0_: __” appears in the

Time Search display if the total time of the

title or track is less than 10 minutes.

Current Chapter

(CH)

G K H L

Using [SKIP/CH.

]

G K

• Press [CLEAR/C.RESET] to erase the

PLAY

CH 1 CH 2 CH 3 CH 4

incorrect input at step 2).

SKIP

PLAY

Current Title

(TT)

Current Track

(TR)

SKIP/CH.

TT 1 TT2 TT3 TT4

TR 1 TR 2 TR 3 TR 4

SKIP/CH.

SKIP

(If the disc has no chapters)

Hint

• [+10] button can also bring the Track

Search display, except for the disc with

less than 10 tracks. For such a disc, track

search can be done by just pressing the

track number.

• Depending on the disc being played, this

function can also be performed by directly

entering the desired chapter number with

the Number buttons. Refer to the manual

accompanying the disc.

• For Audio CDs, Track Search is not avail-

able for Programmed or Random Playback.

Marker Setup

DVD

To return to the marker

later

To exit the marker screen

DVD-V

This feature allows you to assign a specific

point on a disc to be called back later.

To set a marker

RETURN

PLAY

MODE

Press repeatedly until

Hint

this marker display

• The Marker display will disappear in about

30 seconds when there is no output.

• To clear a marker, select the marker to be

cleared at step 2) in the section “To set a

marker” or “To return to the marker later”

and then press [CLEAR/C.RESET].

• Opening the disc tray or turning off the

power will erase all markers.

• Selecting “AC” at step 2) in the section “To

set a marker” or “To return to the marker

later” will also erase all markers.

appears.

Press repeatedly until

this marker display

appears.

MODE

ENTER

at the desired marker

• Playback will restart from the specific

point which you set.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Repeat / Random / Programmed Playback

Repeat Playback

Repeat A-B Playback

Programmed Playback

DVD

DVD-V

You may determine the order in which

tracks will play.

Repeat function is available only during

playback.

PLAY

A-

STOP

A-B

PLAY

TOTAL 0:00:00

At your desired starting point (A)

MODE

1/4

REPEAT

A-B

Press once.

Each time you press [REPEAT], repeat

function changes as example below.

TOTAL

At your desired end point (B)

3:30

5:10

10 4:20

11 3:00

12 3:20

17 4:10

22 2:50

2/3

DVD-V

• Point B should be in the same title

or track as point A.

(repeat off)

1/4

OFF

Hint

(current chapter repeat)

CHAPTER

TITLE

• Up to 99 tracks can be

ordered.

• If eight or more tracks

were in a program, use

[SKIP/CH. G/KK H/L]

to see all the tracks.

• To exit the sequence, press [A-B] so that

ENTER

OFF appears.

(current title repeat)

•

To cancel Point A, press [CLEAR/C.RESET].

• This function does not work in the other

repeat modes.

(repeat off)

OFF

(current track repeat)

(entire disc repeat)

Random Playback

TRACK

ALL

PLAY

This function shuffles the playing

order of tracks instead of playback

in the sequence.

DVD

Hint

• Press [CLEAR/C.RESET] at step 2) to

erase the most recently entered track.

• To erase all programmed tracks at once,

select “ALL CLEAR’’ and press [ENTER] at

step 2).

• Repeat setting (except ALL) will be cleared

when moving to another title, chapter or

track.

STOP

RANDOM

CD-DA

TOTAL 0:45:55

• Repeat playback are not available with all

discs or during repeat A-B playback.

RANDOM PROGRAM

--no indication--

• While a program is being played back,

[STOP C] works as follows;

MODE

PLAY

‰

Press [STOP CC] and [PLAY B] next, so

that the programmed playback restarts.

Press twice.

‰

Press [STOP C] twice and [PLAY BB]

next, so that playback restarts from the

first track in the original order. However,

your programmed playback can be

restarted when you follow above steps.

(Your programs are still stored until

either the disc tray is open or power is

turned off.)

PLAY

Hint

• To repeat the current track in the program,

press [REPEAT] repeatedly until

TRACK’’ appears during playback.

• To repeat the entire program, press

• To repeat the current track in the random

selections, press [REPEAT] repeatedly

“

until “

TRACK” appears during playback.

• To repeat the entire random selections,

press [REPEAT] repeatedly until “

appears during playback.

[REPEAT] repeatedly until “

ALL’’

ALL”

appears during playback.

• During Random Playback, you cannot go

back to the previous track.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Special Settings

Subtitle Language

Audio Language

OFF

ENTER

DVD

DVD-V

ON: Makes the dark areas brighter.

OFF: Shows the original picture as recorded.

This unit allows you to select a subtitle

language (if available) during DVD play- language (if multiple languages are

back.

This unit allows you to select an audio

RETURN

available) during DVD playback.

PLAY

1.ENG Dolby D 3/2.1ch 48k/3

1.ENG/6

Stereo Sound Mode

AUDIO

SUBTITLE

T-SET

DVD

This unit allows you to select a sound

mode during CD playback.

Each time you press [AUDIO], audio

language changes as example below.

Each time you press [SUBTITLE/T-SET],

subtitle language changes as example

below.

(English audio)

(Spanish audio)

(French audio)

ENG

SPA

FRE

PLAY

(no subtitles)

OFF

ENG

FRE

STEREO

(English subtitles)

(French subtitles)

AUDIO

Each time you press [AUDIO], sound

Hint

mode changes as example below.

•

Some discs will only allow you to change the

audio setting from the disc menu. Refer to the

manual accompanying the discs for details.

(right and left channels

are active)

STEREO

L-ch

To set subtitle ON/OFF

• When “OFF” appears on the TV screen, it

means audio language is not available.

(left channel is active)

PLAY

•

If your language is not shown after pressing

[AUDIO] several times, the disc may not have

that language. However, some discs allow

audio language setting on the disc menu.

(Operation varies depending on the disc, so

refer to the manual along with the disc.)

1.ENG/6

(right channel is active)

R-ch

SUBTITLE

T-SET

Virtual Surround

DVD

Camera Angle

DVD-V

OFF

DVD

You can enjoy stereophonic virtual world

on your existing 2 channel stereo system.

DVD-V

Some DVD discs may con-

tain scenes which have

been shot simultaneously

Hint

PLAY

OFF

• If your language is not shown after press-

ing [AUDIO] or [SUBTITLE/T-SET] several

times, the disc may not have that lan-

guage. However, some discs allow audio

language or subtitle language setting on

the disc menu. (Operation varies depend-

ing on the discs, so refer to the manual

along with the disc.)

from various angles. You can change

the camera angle if the

icon

MODE

appears on the screen. If the “ANGLE

ICON” setting is “OFF” in the OTHERS

menu, the

icon will not appear.

Press twice (once for CD ).

(Refer to pages 20 and 22.)

• When “NOT AVAILABLE” appears on the

TV screen, it means no subtitle is recorded

on the scene.

ENTER

1 / 8

PLAY

• If you choose a language that has three-

letter-language code, the code will be dis-

played every time you change the subtitle

language setting. If you choose any other

languages, ‘---’ will be displayed instead.

(Refer to page 24.)

• Some discs will only allow you to change

the subtitle from the disc menu. Refer to

the manual accompanying the discs for

details.

ANGLE

1: Natural effect

2: Emphasized effect

OFF: No effects (original sound)

Black Level Setting

RETURN

DVD

DVD-V

Adjust the Black Level Setting to make

the dark areas of the TV picture brighter.

Hint

For CD play back only

• Virtual Surround will not be effective if the

sound mode is set to something other than

STEREO. Refer to “Stereo Sound mode”.

PLAY

•

When playing back 96kHz with Virtual

Surround function, the sound will be down

sampling at 48kHz and output as digital audio.

MODE

–

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD

DVD Setup

QUICK SETUP Menu

You can select the “PLAYER MENU”, “TV ASPECT”, “PROGRESSIVE” or “DOLBY DIGITAL” from the

QUICK SETUP menu quickly.

SETUP

STOP

Select the desired item.

Confirm that “QUICK” is selected.

ENTER

SETUP

QUICK

P20

P21

Step 5)

SETUP

PLAYER MENU

TV ASPECT

PROGRESSIVE

DOLBY DIGITAL

ENGLISH

4:3 LETTER BOX

OFF

QUICK

CUSTOM

INITIALIZE

BITSTREAM

ENTER

•

Refer to “PLAYER MENU”, “TV ASPECT”, “PROGRESSIVE”

or “DOLBY DIGITAL” on pages 20-21.

CUSTOM Menu

You can change the settings of the unit.

QUICK

on pages 20-21 indicates DVD Setup menus also accessible from the QUICK SETUP menu.

•

SETUP

ENTER

STOP

Select “CUSTOM”.

Select the desired item.

ENTER

SETUP

CUSTOM

LANGUAGE

DISPLAY

AUDIO

PARENTAL

OTHERS

QUICK

CUSTOM

INITIALIZE

QUICK

CUSTOM

INITIALIZE

LANGUAGE menu

DISPLAY menu

AUDIO menu

PARENTAL menu

OTHERS menu

SETUP

LANGUAGE

SETUP

AUDIO

SETUP

PARENTAL

SETUP

OTHERS

SETUP

DISPLAY

PASSWORD

AUDIO

ORIGINAL

OFF

ENGLISH

DRC

DOWN SAMPLING ON

DOLBY DIGITAL BITSTREAM

ANGLE ICON

AUTO POWER OFF ON

TV ASPECT

STILL MODE

PROGRESSIVE

4:3 LETTER BOX

AUTO

OFF

Please enter a 4-digit password.

SUBTITLE

DISC MENU

PLAYER MENU

page 20

page 21

page 22

LANGUAGE Setting

Follow steps 1) to 3) in the “CUSTOM Menu” section on above.

Select the desired language.

Select the desired item.

To exit the menu

ENTER

SETUP

AUDIO: ›1 ›2

(Default: ORIGINAL)

Sets the audio language.

AUDIO

Hint

›1

ORIGINAL

ENGLISH

FRENCH

• Language options are not available

LANGUAGE menu

with some discs.

SUBTITLE: ›1 ›2

(Default: OFF)

Sets the subtitle language.

SUBTITLE

OFF

ENGLISH

FRENCH

• If OTHER is selected on the AUDIO,

SUBTITLE or DISC MENU screen,

press four-digit number to enter the

code for the desired language. (Refer

to the language code list on page 24.)

• Only the languages supported by the

disc can be selected.

SETUP

LANGUAGE

AUDIO

ORIGINAL

SUBTITLE

DISC MENU

PLAYER MENU

OFF

ENGLISH

DISC MENU: ›1

(Default: ENGLISH)

Sets the language for

DVD menu.

DISC MENU

ENGLISH

FRENCH

SPANISH

›2

•

Language Setting for Audio and Subtitle

are not available with some discs. Then

use [AUDIO] and [SUBTITLE/T-SET].

Details are on page 19.

PLAYER MENU

ENGLISH

FRANÇAIS

ESPAÑOL

QUICK

PLAYER MENU:

(Default: ENGLISH)

Sets the language for

the On-screen display.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

DISPLAY Setting

You can change the display functions. Follow steps 1) to 3) in the “CUSTOM Menu” section on page 20.

Select the desired item.

To exit the menu

QUICK

TV ASPECT:

Select the

desired

setting.

SETUP

(Default: 4:3 LETTER BOX)

See Hint on the right.

TV ASPECT

ENTER

TV ASPECT

STILL MODE

4:3 LETTERBOX

AUTO

PROGRESSIVE OFF

4:3 LETTER BOX

4:3 PAN & SCAN

16:9 WIDE

Hint

TV ASPECT:

DISPLAY menu

•

Select “4:3 LETTER BOX”, so

that black bars may appear on

the top and bottom of the screen.

ENTER

SETUP

DISPLAY

STILL MODE:

(Default: AUTO)

See Hint on the right.

TV ASPECT

STILL MODE

PROGRESSIVE

4:3 LETTER BOX

AUTO

OFF

Select the

desired

setting.

STILL MODE

ENTER

TV ASPECT

STILL MODE

4:3 LETTERBOX

AUTO

FIELD

FRAME

PROGRESSIVE OFF

ENTER

• If you select “FIELD”, the

picture in the still mode will

be stabilized.

If you select “FRAME”, the

picture in the still mode will

be highly defined.

• An individual picture on TV

screen is called as “frame”,

which consists of two sepa-

rate images called as “field”.

QUICK

PROGRESSIVE:

(Default: OFF)

If “PROGRESSIVE” is “ON”,

this message appears:

•

Select

“YES”.

See Hint on the right.

Before proceeding…

1. Make sure your TV has progressive scan.

2. Connect with component video cable

4:3 LETTERBOX

AUTO

TV ASPECT

STILL MODE

4:3 LETTERBOX

AUTO

SETUP

NOTE: If there is no picture or picture is

distorted after selecting “YES”,

wait about 15 seconds for auto recovery.

PROGRESSIVE OFF

Activate Progressive?

YES

SELECT:

SET:ENTER

ENTER

•

Some pictures may be blurred

at the “AUTO” setting in the

still mode due to their data

characteristics.

If there is no picture or you do not

press any buttons for 15 seconds,

Progressive Scan will switch to “OFF”.

PROGRESSIVE:

•

You can set “PROGRESSIVE” to

“OFF” either in the DISPLAY

menu or by pressing and hold-

ing [PLAY B] on the front of the

unit for more than 5 seconds.

When “PROGRESSIVE” is “ON”,

video signals from VIDEO OUT

and S-VIDEO OUT jacks will be

distorted or not be output at all.

6 To complete the

PROGRESSIVE

setting

Select

“YES”.

Confirm again to use progressive scan.

If Picture is good, Select “YES”.

ENTER

YES

•

ENTER

SET:ENTER

SELECT:

AUDIO Setting

Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs. Follow steps

1) to 3) in the “CUSTOM Menu” section on page 20.

DRC (Dynamic Range Control):

(Default: ON)

To exit the menu

Select the desired item.

SETUP

Set to “ON” to compress the range between soft and loud sounds.

DRC

OFF

DOWN SAMPLING ON

BITSTREAM

ENTER

DOLBY DIGITAL

BITSTREAM

DOWN SAMPLING:

(Default: ON)

Set to “ON” when outputting in 48kHz.

Hint

DRC:

AUDIO menu

SETUP

AUDIO

• This function is available

only on the discs which

are recorded in the Dolby

Digital format.

Set to “OFF” when outputting the original sound.

DRC

DOWN SAMPLING ON

DOLBY DIGITAL BITSTREAM

DRC

DOWN SAMPLING ON

OFF

DOWN SAMPLING:

DOLBY DIGITAL

BITSTREAM

ENTER

• When playing disc with

sound will be down sam-

pled at 48kHz, even if

you set to “OFF”.

QUICK

DOLBY DIGITAL:

(Default: BITSTREAM)

• This function is avail-

able only on digital out-

putting of a disc

Set to “BITSTREAM” when the unit is connected to a Dolby Digital decoder.

• BITSTREAM: Outputs a Dolby Digital Signals.

• PCM: Convert the Dolby Digital into PCM (2 channel).

recorded in 96kHz.

DRC

DOWN SAMPLING ON

DOLBY DIGITAL BITSTREAM

PCM

ENTER

–

Download from Www.Somanuals.com. All Manuals Search And Download.

PARENTAL Setting

Parental Control limits the disc viewing that exceed your settings. (An incorrect password will not be accepted.)

This feature prevents your children from viewing inappropriate materials.

Parental Levels

Parental Level allows you to set the rating levels of your DVD discs. Playback will stop if the ratings exceed the levels you set.

Follow steps 1) to 3) in the “CUSTOM Menu” section on page 20.

To exit

the menu

Enter your desired four-

digit password (except

for 4737).

Select “PARENTAL

LEVEL”.

Select the

desired level.

SETUP

ENTER

PARENTAL LEVEL

ALL

PARENTAL LEVEL

PASSWORD CHANGE

ALL

8 [ADULT]

7 [NC-17]

6 [R]

PARENTAL menu

CONTROL LEVELS

SETUP

PARENTAL

• ALL:

All parental locks are canceled.

DVD softwares of any grades (adult/general/children) can be played back.

PASSWORD

• Level 8:

Please enter a 4-digit password.

• Levels 7 to 2: Only DVD softwares intended for general use and children can be played

back.

• Level 1:

Only DVD softwares intended for children can be played back, with those

intended for adult and general use prohibited.

TIPS FOR LEVELS

• 8 [ADULT]:

• 7 [NC-17]:

• 6 [R]:

DVD softwares of any grades (adult/general/children) can be played back.

If you have set a password

No one under 17 admitted

already, enter the current

four-digit password.

Restricted; under 17 requires accompanying parent or adult guardian

Parental Guidance Recommended

Unsuitable for children under 13

Parental Guidance suggested

• 5 [PGR]:

• 4 [PG13]:

• 3 [PG]:

SETUP

PARENTAL

PASSWORD

Enter current password.

• 2 [G]:

General Audience

• 1 [KID SAFE]: Suitable for children

Hint

• DVD-Video discs may not respond to the parental lock settings. Make sure this function

works with your DVD-Video discs.

To Change the Password for Parental Controls

You can change your password for parental controls. Follow steps 1) to 3) in the “CUSTOM Menu” section on page 20.

To exit

the menu

Select “PASSWORD

CHANGE”.

Enter your new

four-digit password

(except for 4737).

Enter your desired four-

digit password.

SETUP

ENTER

PARENTAL LEVEL

PASSWORD CHANGE

ALL

Hint

• Record the password

in case you forget it.

PARENTAL menu

SETUP

PASSWORD

Please enter a 4-digit password.

PARENTAL

SETUP

PARENTAL

•

If you forget the pass-

word, press [4], [7], [3],

[7] at step 4), then enter

your new password.

Password will be cleared

and parental levels will

be set to “ALL”.

PASSWORD

Enter current password.

OTHERS Setting

You can change the other functions. Follow steps 1) to 3) in the “CUSTOM Menu” section on page 20.

Select the desired item.

6 To exit the menu

ANGLE ICON:

SETUP

(Default: ON)

Set to “ON” to show the angle icon when multiple camera angles

are available during DVD playback.

OFF

ANGLE ICON

AUTO POWER OFF ON

ENTER

OTHERS menu

SETUP

OTHERS

AUTO POWER OFF:

(Default: ON)

Set to “ON” to automatically turn off the DVD operation and

change the mode to VCR after 30 minutes of no use.

ANGLE ICON

AUTO POWER OFF

ANGLE ICON

AUTO POWER OFF ON

OFF

ENTER

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Reset to the Default Setting (Except for PARENTAL Setting)

To exit

the menu

SETUP

STOP

SETUP

ENTER

Select “INITIALIZE”.

Select “YES”.

SETUP

INITIALIZE

Hint

• When you cancel to

initialize at step 3),

select “NO”.

Press

twice.

QUICK

CUSTOM

INITIALIZE

QUICK

CUSTOM

INITIALIZE

Initialize?

YES

Information

Troubleshooting Guide

If this unit does not perform properly when operated as instructed in this Owner's Manual, check this unit consulting the following checklist.

PROBLEM

CORRECTIVE ACTION

• Make sure the power plug is connected to an AC outlet.

No power.

• Make sure the power is turned on.

• Check if the power plug is connected to an AC outlet.

• Check the batteries in the remote control.

This unit does not respond to the

remote control.

• Aim the remote control directly at the remote sensor. If necessary, remove all the obstacles

between the sensor and the remote control.

• You have to be within 23 feet (7m) of this unit.

• Check if the right mode is selected. If it’s not in the right mode, press [DVD] or [VCR], whichever

you need, on the remote control.

• Check if a cassette tape is in this unit.

• Tune your radio to an empty AM station so that you hear a lot of noises. Turn the volume up, then.

If you hear some signal sound from the radio in response to your pressing buttons on the remote

control, the remote control is working.

• Interference signal may be received. Change the position and orientation of the unit.

Poor picture or noise

• If your antenna is connected to an antenna amplifier, the amplifier’s gain adjustment may need to

be temporarily reduced in order for Auto-Setup to program all channels properly. Temporarily

reduce the amplifier’s gain and preset channels. (See “To Preset the Channel Again” on page 8.)

Cannot preset channels properly.

• Make sure the Timer Recording is set correctly.

Timer recording is impossible.

• Make sure the

light appears on the unit. If not, press [SUBTITLE/T-SET].

• Make sure the VCR clock is set correctly.

• Make sure the tape has a safety tab. If needed, cover the hole with adhesive tape.

Cannot go into record mode.

•

Activate this unit in VCR mode. Press [VCR] on the remote control so that the VCR OUTPUT light is lit.

• Adjust tracking control for a better picture by pressing [CHANNEL L/K] on the unit or

[SKIP/CH. GG/KK H/LL] on the remote control.

Playback picture is partially noisy.

• Head cleaning may be necessary. Refer to “AUTO HEAD CLEANING”.

• Make sure the VCR is not in the Menu mode.

Cannot view a tape but the audio is

OK.

• Change the RF output channel to CH4. Then select the same channel on the TV.

• Fine tune your TV.

No, or poor, playback picture

• Re-check the ANT-IN and ANT-OUT connections. See pages 1 and 6.

• Press [VCR].

• Press [VCR] on the remote control to activate it in the VCR mode. Check if the VCR OUTPUT light

is lit, then set it to the TV position by pressing [VCR].

TV programs cannot be seen

normally.

• You cannot copy a copyrighted video tape. You are experiencing copy guard protection.

Video or color fades in and out when

making a copy of a video tape.

•

Check if this unit is in the VCR mode. If not, press [VCR] on the remote control to switch the mode.

Cannot remove the tape.

No picture.

• Connect the video cables firmly.

• Insert a correct video disc that plays on this unit.

•

Press [DVD] on the remote control. Check if the DVD OUTPUT light is lit. Then try other DVD features.

Set PROGRESSIVE correctly. Turn it on only if your TV has Progressive Scan and you are using the Component

Video connections between the unit and the TV. Disable Progressive Scan for all other connections. (See page 7.)

• Insert the disc.

Disc cannot be played.

No sound.

• Clean the disc.

• Place the disc correctly with the label side up.

• Cancel the parental lock or change the control levels.

• Handle a disc with special care so that it does not have fingerprints, scratches, or dusts on its

surface.

• Connect the audio cables firmly.

• Turn the power of the audio component on.

• Correct the audio output settings.

• Correct the input settings on the audio component.

• This unit does not support DTS audio. This is not a malfunction.

• Connect this unit directly to the TV.

No DTS audio is output.

Distorted picture.

• There are some cases where pictures may be slightly distorted, and those are not a sign of a malfunction.

• Although pictures may stop for a moment, this is not a malfunction.

•

Check if the INTERLACE/PROGRESSIVE mode is set correctly according to your TV. See pages 20-21.

• The selected language is not available for audio or subtitles on the DVD.

This is not a malfunction.

Audio or subtitle language does not

match the setup.

• The DVD does not contain sequences recorded from different camera angles. This is not a malfunction.

The camera angle cannot be changed.

• The DVD does not contain audio source or subtitles in the selected language.

This is not a malfunction.

Audio or subtitle language cannot

be changed.

• That operation is prohibited by this unit or the disc.

This is not a malfunction.

“Prohibited icon” appears on the

screen, prohibiting an operation.

• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s Manual

for details on correct operations.

• Playback from a desired track and random playback are not available during program playback.

• Some functions are prohibited on some discs.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

Video Heads :

Operating temperature :

41°F (5°C) to 104°F (40°C)

Dimensions :

W : 17-3/16"(435mm)

H : 3-3/4" (94mm)

D : 9-3/16" (233mm)

Weight :

• Designs and specifications are subject

to change without notice.

• If there is a discrepancy between lan-

guages, the default language will be

English.

Four Heads

Output signal format :

NTSC color

Power source :

120 V AC +/- 10%, 60 Hz +/- 0.5%

Power consumption :

21W (standby: 3.8W)

Approx 6lbs (2.7kg)

Language List

Language

Code

Language

Code

Language

Code

Language

Code

A-B

French [FRE]

Frisian

Galician

Georgian

German [GER]

Greek [GRE]

Greenlandic

Guarani

Gujarati

Hausa

Hebrew

Hindi

Hungarian [HUN]

I-K

Icelandic [ICE]

Indonesian

Interlingua

Interlingue

Inupiak

Irish [IRI]

Italian [ITA]

Japanese [ENG]

Javanese

Kannada

Kashmiri

Kazakh

5264

5271

5358

5747

5051

5158

5758

5360

5367

5447

5569

5455

5467

Macedonian

Malagasy

Malay

Malayalam

Maltese

Maori

Marathi

Moldavian

Mongolian

Nauru

Nepali

Norwegian [NOR]

O-R

Occitan

Oriya

Oromo(Afan)

Panjabi

Pashto;Pushto

Persian

Polish [POL]

Portuguese [POR]

Quechua

Rhaeto-Romance

Romanian [RUM]

Russian [RUS]

Samoan

Sangho

Sanskrit

Scots Gaelic

Serbian

Serbo-Croatian

Sesotho

Setswana

Shona

Sindhi

Singhalese

5957

5953

5965

5958

5966

5955

5964

5961

5960

6047

6051

6061

Siswat

Slovak

Slovenian

Somali

Spanish [SPA]

Sundanese

Swahili

6565

6557

6558

6561

5165

6567

6569

6568

Abkhazian

Afar

Afrikaans

Albanian

Amharic

Arabic

Armenian

Assamese

Aymara

Azerbaijani

Bashkir

4748

4747

4752

6563

4759

4764

5471

4765

4771

4772

4847

5167

4860

5072

4854

4855

4864

4853

5971

4851

Swedish [SWE]

Tagalog

Tajik

Tamil

Tatar

Telugu

Thai

Tibetan

Tigrinya

Tonga

Tsonga

Turkish [TUR]

Turkmen

Twi

6658

6653

6647

6666

6651

6654

4861

6655

6661

6665

6664

6657

6669

Basque

Bengali;Bangla

Bhutani

6149

6164

6159

6247

6265

5247

6258

6266

6367

6459

6461

6467

5565

5560

5547

5551

5557

5347

5566

5647

5669

5760

5765

5757

6469

5771

6460

5761

5767

Bihari

Bislama

Breton

Bulgarian

Burmese

Byelorussian

C-E

Cambodian

Catalan

Chinese [CHI]

Corsican

5759

4947

7254

4961

5464

4965

5047

6058

5160

5161

5166

U-Z

Ukrainian

Urdu

Uzbek

Vietnamese

Volapuk

Welsh

Wolof

Xhosa

Yiddish

Yoruba

Zulu

6757

6764

6772

6855

6861

4971

6961

7054

5655

7161

7267

Croatian

Kinyarwanda

Kirghiz

Kirundi

Korean [KOR]

Kurdish

6559

6553

6547

5350

6564

6554

6566

6660

6560

6550

6555

Czech [CZE]

Danish [DAN]

Dutch [DUT]

English [ENG]

Esperanto

Estonian

L-N

Laothian

Latin

Latvian;Lettish

Lingala

Lithuanian

5861

5847

5868

5860

5866

F-H

Faroese

Fiji

Finnish [FIN]

5261

5256

5255

If you choose a Language that has a 3 letter language code, the code will be displayed every time you change the Audio or Subtitle language

setting on page 19. If you choose any other languages, ‘---’ will be displayed instead. (3 letter language code is written in bracket.)

Limited Ninety-Day Warranty

This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for ninety (90) days

from the date of purchase from RadioShack company-owned stores and authorized RadioShack franchisees and dealers. For complete

warranty details and exclusions, check with your local RadioShack store.

RadioShack Customer Relations

300 RadioShack Circle, Fort Worth, TX 76102

04/04

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Español

Conexiones

Activación de la unidad

por primera vez

AJUSTE DE RELOJ

MES

1 0

DIA

– –

AÑO

– – – –

Consulte la “Basic TV Connection”

en la página delantera antes de

utilizar esta unidad.

HORA MINUTO AM/PM

– – – – – –

VCR

Canal de salida RF

Si el canal 3 se está utilizando para

una transmisión.

Seleccione el mes actual.

Encienda el televisor y sin-

tonice al canal 3.

1)Programe su televisor al canal 4.

2)Inserte una cinta pregrabada en esta

unidad.

3)Pulse [OUTPUT] en la unidad para

que se encienda la luz VCR OUT-

PUT.

• Si aparece ruido en la pantalla de

TV, presione [VCR/TV] en el mando

a distancia.

4)Pulse una vez [PLAY B].

5)Después de unos segundos, pulse

[PLAY B] en la unidad durante 3

segundos.

• El canal de salida RF cambiará del

canal 3 al canal 4 y podrá ver una

imagen reproducida.

• Cuando no aparezca una imagen en

la pantalla del televisor, repita el

paso 4).

•

Si el canal 3 se está utilizando para una trans-

misión, vea la sección “Canal de salida RF”.

AJUSTE DE RELOJ

MES

1 0

DIA

0 2

AÑO

– – – –

Control Remoto

Pantalla del televisor

POWER

HORA MINUTO AM/PM

– – – – – –

SELEC. IDIOMA

ENGLISH

FRANCAIS

Seleccione el día actual.

B ESPAÑOL

[ON]

AJUSTE DE RELOJ

MES

1 0

DIA

0 2

AÑO

2 0 0 6

HORA MINUTO AM/PM

– – – – – –

CA 01

Seleccione el año actual.

6)Pulse [STOP C] para parar la repro-

ducción.

AJUSTE AUTO

Instalación de las pilas

del control remoto

AJUSTE DE RELOJ

MES

1 0

DIA

AÑO

0 2 LUN 2 0 0 6

Conecta el cable de la caja de canales de cable o la

caja de satélite en la toma ANT-IN de la unidad?

HORA MINUTO AM/PM

0 5 – – – –

Pulse [MENU]

Seleccione la hora actual.

para salir.

Conmutación VCR/DVD

No Espere unos minutos.

Después del escaneo...

• El sintonizador se detiene en el canal

memorizado más bajo.

OPEN/CLOSE

POWER

OPEN/CLOSE

/EJECT

POWER

SPEED

AUDIO

STOP/EJECT

PLAY

STOP

PLA

CHANNEL

DVD

AJUSTE DE RELOJ

VIDEO

AUDIO

REW

.FWD

REC/OTR

SKIP/CH.

MES

1 0

DIA

AÑO

VCR/TV

SLOW

0 2 LUN 2 0 0 6

Botón VCR

Botón DVD

VCR

1 0

DISPLAY

DVD

PAUSE

• Puede seleccionar sólo los canales memo-

rizados en esta unidad con

[SKIP/CH. G/K H/LL]

HORA MINUTO AM/PM

0 5 4 0 – –

PLAY

STOP

REC/OTR

Luz VCR OUTPUT

Luz DVD OUTPUT

Botón OUTPUT

(o [CHANNEL K/LL]).

ENTER

VCR OUTPUT DVD

• Si aparece nuevamente “AJUSTE AUTO”

en la pantalla de TV, verifique las conex-

iones de cable. Presione nuevamente [B].

SETUP TOP MENU

RETURN

Seleccione los minutos actuales.

AJUSTE DE RELOJ

MODE

CLEAR/

C. RESET

MODE

ZOOM

SUBTITLE

-SET

ANGLE

REPEAT

A-B

Ajuste del reloj

MES

1 0

DIA

AÑO

VCR

0 2 LUN 2 0 0 6

VCR

MODO VCR

Pulse [VCR] en el control remoto.

(Compruebe que está encendida la luz

VCR OUTPUT.)

HORA MINUTO AM/PM

0 5

4 0

P M AM

- M E N U -

B PM

PROGRAMAR

AUTOREPETIR [OFF]

AJUSTE CANAL

B AJUSTE DE RELOJ

SELEC. IDIOMA

SALIDA DEL AUDIO

TV ESTEREO [ON]

SAP

Seleccione "AM" o "PM".

MODO DVD

Pulse [DVD] en el control remoto.

(Compruebe que está encendida la luz

DVD OUTPUT.)

Para salir de la pantalla AJUSTE DE

RELOJ

•

Si no se ha ajustado el reloj,

aparece la pantalla AJUSTE

DE RELOJ cuando pulse

[MENU]. En este caso, vaya

al paso 2).

Consejo

• Si pulsa sólo [OUTPUT] en el panel

frontal NO cambía el modo del control

remoto. DEBE seleccionar también el

modo correcto en el control remoto.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Español

Reproducción de la grabadora de vídeo

Reproducción de DVD/CD

Antes: Encienda el televisor y cambie al canal 3.

• Si el canal 3 se está utilizando para una transmisión, vea

la sección “Canal de salida RF”.

Antes: Encienda el televisor, amplificador y otros equipos que puedan estar

conectados a esta unidad. Asegúrese que el televisor y el sintoamplificador de

audio (de venta en los comercios) están en el canal correcto.

DVD

VCR

DVD-V

OPEN/CLOSE

/EJECT

OPEN/CLOSE

/EJECT

POWER

SPEED

AUDIO

SPEED

AUDIO

Para empezar

la reproducción

OPEN/CLOSE

/EJECT

POWER

SKIP/CH.

PLAY

SKIP/CH.

VCR/TV

SLOW

VCR/TV

SLOW

VCR

+1 0

DVD

Ponga un disco con la

etiqueta hacia arriba.

VCR

+1 0

DVD

DISPLAY

PAUSE

DISPLAY

PAUSE

Para parar la

reproducción

Para expulsar

OPEN/CLOSE

/EJECT

PLAY

STOP

Para empezar

la reproducción

Para parar la

PLAY

STOP

reproducción

STOP

REC/OTR

STOP

PLAY

Control remoto

Modo DVD

Modo de grabadora de vídeo

Disco/cinta

₍B_Oo_rdt_eó_nn_alfabético)

•Para seleccionar el canal.

•El botón +10 no tiene efecto

en el modo de grabadora de

vídeo.

•

Para seleccionar directamente

el capítulo o el título.

•

Para seleccionar directamente

la canción.

+1 0

•

Para buscar en avance/retroceso

en un disco.

Para empezar la reproducción en avance/

retroceso lento durante el modo de pausa.

•Para buscar en avance/

retroceso en un disco.

•Para el avance/retroceso

de una cinta.

•

Para seleccionar un ítem

en el menú de la grabadora

de vídeo.

ENTER

Para avanzar al siguiente

menú de la grabadora de

vídeo.

•Para mover el cursor y

determinar su posición.

•Para mover el curso y

determinar su posición.

OPEN/CLOSE

POWER

/EJECT

SPEED

AUDIO

Para volver un paso

durante el ajuste del reloj y

temporizador.

A-B

•Para repetir entre los puntos •Para repetir entre los puntos

A y B elegidos

A y B elegidos.

ANGLE

AUDIO

SKIP/CH.

•Para seleccionar los ángulos

de la cámara en un disco.

VCR/TV

SLOW

•Para seleccionar el idioma de •Para seleccionar ESTÉREO,

audio en un disco. L-ch o R-ch.

•Para borrar los marcadores.

•Para borrar los marcadores. •Para retirar el Nº de estado

CLEAR/

C. RESET

•Para salir del menú de la

grabadora de vídeo.

•Para reponer el contador de

cinta.

+1 0

en la entrada de programa.

•Para borrar los números

entrados incorrectamente.

DISPLAY

VCR

DVD

PAUSE

entrados incorrectamente.

•Para borrar el punt para la

repetición A-B.

DISPLAY

DVD

•Para indicar el modo de

disco actual.

•Para indicar el modo de

disco actual.

•Para indicar la hora actual,

contador de cinta y canal.

PLAY

•Para seleccionar el modo

de salida de DVD.

• Para seleccionar el modo de

salida de DVD.

STOP

•Para activar el mando a

distancia en el modo DVD.

•Para llamar el menu en un

•

Para activar el mando a

distancia en el modo DVD.

REC/OTR

MODE

•Para llamar el menú de la

grabadora de vídeo.

disco.

ENTER

•Para disponer el orden de

reproducción o la

reproducción aleatoria.

•Para activar/desactivar el

envolvente virtual.

•Para activar/desactivar el

nivel del negro.

•Para activar/desactivar el

envolvente virtual.

SETUP TOP MENU

RETURN

MODE

CLEAR/

C. RESET

MODE

ZOOM

OPEN/CLOSE

/EJECT

•Para abrir o cerrar la bandeja •Para abrir o cerrar la bandeja •Para expulsar el videocasete

del disco.

de la grabadora de vídeo.

SUBTITLE

T-SET

ANGLE

REPEAT

A-B

•

Para hacer una pausa de la

reproducción o grabación de la cinta.

Para avanzar la reproducción

un cuadro a la vez.

•Para hacer una pausa de

reproducción del disco.

•Para avanzar la reproducción

un cuadro a la vez.

PAUSE

• Para hacer una pausa en la

reproducción del disco.

•

Para empezar la reproducción

del disco.

•

Para empezar la reproducción

del disco.

•

Para empezar la reproducción

de la cinta.

PLAY

POWER

•Para encender o apagar la

unidad.

•Para encender o apagar la

unidad.

•Para encender o apagar la

unidad.

REC/OTR

REPEAT

RETURN

•Para empezar una grabaciòn

o una grabaciòn de un toque.

•

Para reproducir repetidamente

un capítulo o título.

•

Para reproducir repetidamente

una canción o disco.

•Para volver a la operación

previa en el menú.

•Para volver a la operación

previa en el menú.

•Para buscar una canción.

•Para buscar la hora.

•Para colocar o buscar los

marcadores.

MODE

•

Para buscar un capítulo, título u hora.

Para colocar o buscar los

marcadores.

•Para llamar el menú de

búsqueda de índice u hora.

SETUP

•Para llamar el menú de

programación de DVD.

•Para llamar el menú de

programación de DVD.

SKIP/CH.

•

Para cambiar de canal.

Para ajustar manualmente el

seguimiento durante la reproducción.

•

•Para saltar capítulos.

•Para saltar canciones.

SLOW

•Para ver la cinta en cámara

lenta.

SPEED

STOP

•Para seleccionar la velocidad

de grabación.

•Para parar la reproducción o

grabación.

•Para parar la reproducción. •Para parar la reproducción.

SUBTITLE

T-SET

•

Para poner la grabadora de

vídeo en el modo de espera

para una grabación con temporizador.

•Para seleccionar subtítulos

en un disco.

TOP MENU

VCR

•Para llamar el menú superior

en un disco.

•

Para seleccionar el modo de

salida de la grabadora de vídeo.

Para activar el mando a distancia

en el modo de la grabadora de vídeo.

VCR/TV

ZOOM

•

Para seleccionar la posición

de DVD o posición del televisor.

•

Para seleccionar la posición de

CD o la posición del televisor.

•

Para seleccionar la posición de la

grabadora de vídeo o posición del televisor.

•Para ampliar parte de la

imagen. (x2/x4)

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Use Guide

Connections

Turn on the unit for the

CLOCK SET

MONTH DAY YEAR

first time

1 0 – – – – – –

Please refer to “Basic TV

Connection” on the front page

before you use this unit.

RF Output Channel

If channel 3 is already occupied for

broadcasting,

1)Set your TV to channel 4.

2)Insert a pre-recorded tape into this

unit.

3)Press [OUTPUT] on the unit so that

the VCR OUTPUT light is lit.

• If noise appears on the TV screen,

press [VCR/TV] on the remote control.

4)Press [PLAY B] once.

5)After a few seconds, hold [PLAY B]

on the unit for 3 seconds.

• The RF output channel will change

to channel 4 from channel 3 and you

will see a playback picture.

• When a picture does not appear on

the TV screen, repeat step 4).

6)Press [STOP C] to stop playback.

HOUR MINUTE AM/PM

– – – – – –

VCR

Select the current month.

Turn on the TV and set it

to channel 3.

• If channel 3 is already occupied for broadcasting,

see“RF Output Channel” section.

CLOCK SET

MONTH DAY

1 0 0 2

YEAR

– – – –

Remote Control TV Screen

POWER

HOUR MINUTE AM/PM

– – – – – –

LANGUAGE SELECT

B ENGLISH

FRANCAIS

ESPAÑOL

[ON]

Select the current day.

CLOCK SET

MONTH DAY

1 0 0 2

YEAR

2 0 0 6

HOUR MINUTE AM/PM

– – – – – –

Installing the Batteries

for the Remote Control

CH 01

Select the current year.

AUTO SET UP

CLOCK SET

MONTH DAY

YEAR

1 0 0 2 MON 2 0 0 6

Do you connect the cable from the cable box or

the satellite box to the unit’s ANT-IN jack?

YES

HOUR MINUTE AM/PM

0 5 – – – –

VCR/DVD Switching

Yes Press [MENU]

Select the current hour.

to exit.

OPEN/CLOSE

POWER

OPEN/CLOSE

/EJECT

POWER

SPEED

AUDIO

STOP/EJECT

PLAY

STOP

PLAY

CHANNEL

DVD

VIDEO

AUDIO

REW

.FWD

REC/OTR

SKIP/CH.

VCR/TV

SLOW

No Please wait for a few minutes.

VCR button

DVD button

VCR

1 0

CLOCK SET

DISPLAY

DVD

PAUSE

After scanning...

MONTH DAY

YEAR

PLAY

STOP

• The tuner stops on the lowest memorized

channel.

• You can select only the channels memo-

rized in this unit by using

[SKIP/CH. G/K H/LL]

(or [CHANNEL K/LL]).

1 0 0 2 MON 2 0 0 6

REC/OTR

VCR OUTPUT light

DVD OUTPUT light

OUTPUT button

ENTER

HOUR MINUTE AM/PM

0 5 4 0 – –

VCR OUTPUT DVD

SETUP TOP MENU

RETURN

MODE

CLEAR/

C. RESET

MODE

ZOOM

SUBTITLE

-SET

ANGLE

REPEAT

A-B

Select the current minute.

CLOCK SET

• If “AUTO SET UP” appears on the TV

screen again, check the cable connections.

Then, press [B] once again.

VCR MODE

Clock Setup

MONTH DAY

YEAR

Press [VCR] on the remote control.

1 0 0 2 MON 2 0 0 6

(Verify that the VCR OUTPUT light is lit.)

VCR

HOUR MINUTE AM/PM

VCR

0 5

4 0

P M AM

B PM

- M E N U -

DVD MODE

Press [DVD] on the remote control.

(Verify that the DVD OUTPUT light is lit.)

TIMER PROGRAMMING

AUTO REPEAT [OFF]

CHANNEL SET UP

B CLOCK SET

Select “AM” or “PM”.

LANGUAGE SELECT

AUDIO OUT

To exit the CLOCK SET

screen

TV STEREO

SAP

[ON]

Hint

• If the clock is not set, the

CLOCK SET screen

appears when you press

[MENU]. In this case, go

to step 2).

• Pressing only [OUTPUT] on the front

panel DOES NOT switch the mode of the

remote control. You MUST select the cor-

rect mode on the remote control.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Use Guide

VCR Playback

DVD/CD Playback

Before: Turn on the TV and set it to channel 3.

• If channel 3 is already occupied for broadcasting, see “RF

Output Channel” section.

Before: Turn on the TV, amplifier and any other components which are con-

nected to this unit. Make sure the TV and audio receiver (commercially avail-

able) are set to the correct channel.

DVD

VCR

DVD-V

OPEN/CLOSE

/EJECT

OPEN/CLOSE

/EJECT

POWER

SPEED

AUDIO

SPEED

AUDIO

To start

playback

OPEN/CLOSE

/EJECT

POWER

SKIP/CH.

PLAY

VCR/TV

SLOW

VCR/TV

SLOW

Insert a disc with

label facing up.

VCR

+1 0

DVD

VCR

+1 0

DVD

DISPLAY

PAUSE

DISPLAY

PAUSE

To stop

playback

To eject

OPEN/CLOSE

/EJECT

To start

playback

To stop

playback

PLAY

STOP

REC/OTR

STOP

PLAY

Remote Control

VCR mode

DVD mode

Disc/Tape

₍B_Au_lpt_ht_ao_bn_{etical order)}

•To select channel.

•The +10 button has no effect

in VCR mode.

•To select chapter or title

directly.

•To select track directly.

+1 0

•To search forward/backward

through a disc.

•To begin slow forward/

reverse playback during the

pause mode.

•To search forward/backward

through a disc.

•To forward/backward a tape.

•To select an item

on the VCR Menu.

•To advance to the

next VCR Menu.

•To go back one step

during clock and

timer setting.

ENTER

•To move the cursor and

determine its position.

•To move the cursor and

determine its position.

OPEN/CLOSE

/EJECT

POWER

SPEED

AUDIO

A-B

•To repeat between your

chosen point A and B.

•To repeat between your

chosen point A and B.

ANGLE

AUDIO

•To select camera angles on

a disc.

SKIP/CH.

•To select audio languages on •To select STEREO,

a disc.

VCR/TV

SLOW

L-ch or R-ch.

•To clear the markers.

•To remove status number in

program input.

•To clear the markers.

•To clear the numbers

entered incorrectly.

•To cancel the point for A-B

repeat.

CLEAR/

C. RESET

VCR

+1 0

DVD

•To exit the VCR Menu.

To clear the numbers entered

•To reset the tape counter.

•

DISPLAY

PAUSE

incorrectly.

•To cancel the point for A-B

repeat.

DISPLAY

DVD

•To display the current disc

mode.

•To display the current disc

mode.

• To select the DVD output

mode.

• To activate the remote

control in DVD mode.

•To display the current time,

tape counter, and channel.

PLAY

•To select the DVD output

mode.

To activate the remote control

STOP

•

REC/OTR

in DVD mode.

MODE

•To call up the Menu

on a disc.

•To call up the VCR Menu.

ENTER

•To arrange the playing

order or play randomly.

•To set black level on/off.

•To set virtual surround on/off.

SETUP TOP MENU

RETURN

•

To set virtual surround on/off.

MODE

CLEAR/

C. RESET

OPEN/CLOSE

/EJECT

MODE

ZOOM

•To eject the video cassette

from the cassette

compartment.

• To pause tape playback or

recording.

•To advance playback

one frame at a time.

•To open or close the disc

tray.

•To open or close the disc

tray.

SUBTITLE

T-SET

ANGLE

REPEAT

A-B

PAUSE

•To pause disc playback.

•To advance playback

one frame at a time.

• To pause disc playback.

• To begin disc playback.

•To turn the unit on or off.

• To begin disc playback.

•To begin tape playback.

PLAY

POWER

•To turn the unit on or off.

REC/OTR

REPEAT

RETURN

•To start a recording or

One Touch Recording.

•To play a chapter or title

repeatedly.

•To play a track or disc

repeatedly.

•To return to the previous

operation in menu.

•To return to the previous

operation in menu.

MODE

•To search track.

To search chapter, title or time.

•To search time.

•

•To call up the index or time

search menu.

To set or search the markers.

•

To set or search the markers.

SETUP

•To call up the DVD setup

menu.

•To call up the DVD setup

menu.

•To change channels.

•To adjust the tracking

manually during playback.

SKIP/CH.

• To skip chapters or titles.

• To skip tracks.

SLOW

•To view the tape in slow

motion.

SPEED

STOP

•To select the recording

speed.

• To stop playback.

•

To stop playback or recording.

SUBTITLE

T-SET

•To put the VCR into standby

mode for a Timer Recording.

•To select subtitles on a disc.

TOP MENU

VCR

•To call up the Top Menu

on a disc.

•To select the VCR output

mode.

•To activate the remote

control in VCR mode.

VCR/TV

ZOOM

•To select DVD position or

TV position.

•To select CD position or TV •To select VCR position or

position. TV position.

•To magnify part of a picture.

(x2/x4)

03A06

Printed in China

1VMN22991 / E8A95UD ★★★★★

Download from Www.Somanuals.com. All Manuals Search And Download.

Quasar Garage Door Opener EUR511514 User Guide
Radio Shack Cordless Telephone ET 543 User Guide
RCA VCR VR355 VR545 User Guide
Ricoh Printer MP 2000L User Guide
Samsung Baby Monitor SNH E6411BN User Guide
Samsung Digital Camera EC WB2100BPBUS User Guide
Sanyo CRT Television DS13204 User Guide
Sapphire Audio Speaker Sapphire XLs User Guide
Sea Sea Digital Camera 06138 User Guide
Senco Nail Gun PC0960 User Guide