900 MHz Cordless Phone
with Caller ID/Call Waiting ID and
Digital Answering System
Download from Www.Somanuals.com. All Manuals Search And Download.
Dialing Numbers from a Caller ID Record ...................................................................... 16
Storing a Caller ID Record in Memory ............................................................................ 16
Deleting Caller ID Records ............................................................................................. 16
Answering System Operation ............................................................................................. 17
Using the Menu Button ................................................................................................... 17
Setting the Day/Time ...................................................................................................... 17
Setting the Number of Rings .......................................................................................... 18
Setting the Record Time ................................................................................................. 18
Selecting the Outgoing Message .................................................................................... 18
Recording/Deleting an Outgoing Message ..................................................................... 19
Setting the System to Answer Calls ............................................................................... 19
Screening Calls .............................................................................................................. 19
Recording Incoming Messages ...................................................................................... 19
Recording a Memo ......................................................................................................... 20
Recording a Conversation .............................................................................................. 20
Playing Messages .......................................................................................................... 20
Adjusting the Volume ...................................................................................................... 21
Deleting Messages ......................................................................................................... 21
Remote Operation .......................................................................................................... 21
Setting the Security Code ....................................................................................... 21
Using the Toll-Saver ................................................................................................ 22
Using Remote Commands ............................................................................................. 22
Remote Commands ................................................................................................ 23
Troubleshooting ................................................................................................................... 24
Care ................................................................................................................................ 26
FCC Statement ............................................................................................................... 26
The FCC Wants You to Know ......................................................................................... 26
Lightning ......................................................................................................................... 26
This phone has been tested and found to
WARNING:
To reduce the risk the of fire or shock hazard, do not expose this product to rain or moisture.
comply with all applicable UL and FCC
The lightning symbol is intended to alert
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
.
.
you to the presence of uninsulated danger-
ous voltage within this product’s enclo-
sure that might be of sufficient magnitude
!
standards.
to constitute
a
risk of electric shock. Do
not open the product’s case.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-SERVICE-
ABLE PARTS INSIDE. REFER SERVIC-
ING TO QUALIFIED PERSONNEL.
The exclamation symbol is intended to in-
form you that important operating and
maintenance instructions are included in
the literature accompanying this product.
!
3
Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
ˆ Important Safety Instructions
When using your telephone equipment, basic safety
precautions should always be followed to reduce the risk
of fire, electric shock and injury to persons, including the
following:
Opening or removing covers may expose you to
dangerous voltages or other risks. Incorrect
reassembly can cause electric shock when the
product is subsequently used.
1. Read and understand all instructions.
17. Unplug this product from the wall outlet and refer
servicing to qualified services personnel under the
following conditions:
2. Follow all warnings and instructions marked on the
product.
•
•
•
•
When the power cord plug is damaged or frayed.
If liquid has been spilled into the product.
3. Never install telephone wiring during a lightning
storm.
4. Never install telephone jacks in wet locations unless
the jack is specifically designed for wet locations.
If the product has been exposed to rain or water.
If the product does not operate normally by
following the operating instructions.
5. Never touch uninsulated telephone wires or
terminals unless the telephone line has been
disconnected at the network interface.
Adjust only those controls that are covered by the
operating instructions because improper
adjustments of other controls may result in damage
and will often require extensive work by a qualified
technician to restore the product to normal
operation.
6. Use caution when installing or modifying telephone
lines.
7. Do not affix the AC power supply cord to building
surfaces with metal fittings (if the product has an AC
power cord).
•
•
If the product has been dropped or the cabinet has
been damaged.
8. Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
If the product exhibits a distinct change in
performance.
9. Do not use this product near water, for example,
near a bathtub, wash bowl, kitchen sink, or laundry
tub, in a wet basement, or near a swimming pool.
18. Avoid using a telephone (other than a cordless type)
during an electrical storm. There may be a remote
risk of electric shock from lightning.
10. Do not place this product on an unstable cart, stand,
or table. The product may fall, causing serious
damage to the product.
19. Do not use the telephone to report a gas leak while
in the vicinity of the leak.
11. Slots and openings in the telephone’s cabinet and
the back or bottom are provided for ventilation. To
protect the telephone from overheating, these
openings must not be blocked or covered. The
openings should never be blocked by placing the
product on a bed, sofa, rug, or other similar surface.
This product should never be placed near or over a
radiator or heat register. This product should not be
placed in a built-in installation unless proper
ventilation is provided.
BATTERY SAFETY
INSTRUCTIONS
CAUTION: TO REDUCE THE RISK OF FIRE OR
INJURY, READ AND FOLLOW THESE INSTRUCTIONS
.
•
•
•
•
Use only the appropriate type and size battery pack
specified in the instruction manual provided for this
product.
12. This product should be operated only from the type
of power source indicated on the marking label. If
you are not sure of the type of power supply to your
home, consult your local power company.
Do not dispose of the battery pack in a fire. The cell
may explode. Check with local codes for possible
special disposal instructions.
Do not open or mutilate the battery pack. Released
electrolyte is corrosive and may cause damage to
the eyes or skin. It may be toxic if swallowed.
13. Do not allow anything to rest on the power cord. Do
not locate this product where the cord will be
stepped on.
Exercise care in handing the battery pack in order
not to short it with conducting materials such as
rings, bracelets and keys. The battery or conductor
may overheat and cause burns.
14. Do not overload wall outlets and extension cords as
this can result in a risk of fire or electric shock.
15. Never push objects of any kind into this product
through cabinet slots as they may touch dangerous
voltage points or short out parts that could result in
a risk of fire or electric shock. Never spill liquid of
any kind on the product.
•
•
Charge the battery pack provided with or identified
for use with this product only in accordance with the
instructions and limitations specified in the
instruction manual provided for this product.
16. To reduce the risk of electric shock, do not
disassemble this product. Take it to a qualified
serviceman when service or repair work is required.
Observe proper polarity orientation between the
battery pack and battery charger.
SAVE THESE INSTRUCTIONS
4
Important Safety Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
ˆ Introduction
Thank you for purchasing our 900 MHz
Cordless Telephone. It provides excellent
clarity and range and integrates Caller ID,
Call Waiting ID, and a digital answering
system into one space-saving device. The
900 MHz band provides less interference,
clearer sound, and greater range than 46/49
MHz cordless telephones.
Where Caller ID is offered, one or more
options are generally available:
• caller’s number only
• caller’s name only
• caller’s name and number
If you subscribe to Call Waiting ID and Caller
ID, the system can show you the incoming
caller information, even when you are
already talking on the phone.
The digital answering system provides clear
reliable messaging with call screening, day/
time stamp, call counter, remote access and
instant skip or replay messaging.
READ THIS BEFORE
INSTALLATION
The Caller ID records each caller’s name (if
available in your area), telephone number,
and the date and time of the call, as provided
by your local phone company to Caller ID
service subscribers.
We have designed your phone to conform to
federal regulations and you can connect it to
most phone lines. However, each device that
you connect to the telephone line draws
power from the line. We refer to this power
draw as the phone’s ringer equivalence
number, or REN. The REN is on the bottom
of your phone.
IMPORTANT
Cordless phones such as this one require
AC power to operate. When the AC power is
off, you cannot dial out or receive incoming
calls using your phone. To be safe, you
should also have a phone that does not need
AC power to operate (not a cordless phone)
so you can still make and receive calls if
there is an AC power failure.
If you use more than one phone or other
device on the line, add up all the RENs. If the
total is more than five (three in rural areas),
your phones might not ring. If ringer
operation is impaired, remove one of the
devices from the line.
When AC power is lost, the phone loses the
security access-protection code connection
between the base and the handset. When
power is restored, put the handset on the
base briefly to restore this connection.
The digital answering system stores up to 16
minutes of messages on a computer chip
and records each message’s day and time.
This gives you advanced capabilities over
tape-based answering machines:
IMPORTANT CALLER ID
INFORMATION
• You can delete individual messages and
save the rest.
To use Caller ID and Call Waiting, you must
be in an area where those services are
available and you must subscribe to those
services through your local phone company.
• There are no tapes to bother with and no
tape mechanisms to wear out.
5
Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
The remote operation feature lets you
operate your answering system from a
touch-tone phone (or from a rotary phone
with a pocket tone dialer).
Answering System Highlights
Call Screening
— lets you listen as a caller
leaves a message so you can decide
whether or not to answer the call.
Telephone Highlights
Adjustable Ring Number
— lets you set the
system to answer after two, four or six rings.
10 Number Memory Dialing
— stores 10
numbers in memory for easy dialing.
Two Prerecorded Messages
— choose
from two prerecorded messages (one lets
callers leave a message and the other is an
announcement-only setting) or record your
own.
Page
— sends a paging signal from the base
to the handset to page someone or locate
the handset.
Headset Jack
headset (available at your local RadioShack
store) for hands-free convenience.
— connects an optional
Message Counter
recorded messages.
— shows the number of
Programmable Security Code
two-digit security code for secure remote
operation.
— sets a
40 Channels
— automatically selects a clear
channel when you make or answer a call.
You can also manually change channels
during a call.
Memo Recording
— lets you leave
messages for yourself or others, or record a
phone conversation.
Super CCT Noise-Reduction Circuitry
provides clear telephone conversations for
sound clarity comparable to a corded phone.
—
Phone Pick-Up Detection
— stops
recording when you pick up any phone on
the same line as the answering system, and
resets to answer the next call.
Ringer Volume Control
handset ringer tone/volume settings.
— offers four
Volume Control
volume.
— adjusts the handset’s
Toll-Saver
charges when you call by long distance to
check your messages.
— lets you avoid unnecessary
Long Battery Life
— the supplied battery
pack (when fully charged) provides about 7
hours of talk time or 14 days of standby time.
Digital Volume Control
adjust the level of the message playback.
— lets you precisely
Security Access-Protection Code
— helps
prevent other cordless phone users from
using your phone line.
ˆ Installation
on a wall. Choose a location that is:
• near an AC outlet
MOUNTING THE PHONE
You can place the phone on a desk or table,
mount it on a standard wall plate, or directly
6
Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
• near a modular telephone line jack
• out of the way of normal activities
2. Plug the modular cord’s other end into a
modular telephone line jack.
3. Insert the supplied AC
adapter’s barrel plug
• away from electrical machinery,
electrical appliances, metal walls or
filing cabinets, wireless intercoms,
alarms, and room monitors
DC IN 9V
into the
on the back.
jack
4. Route the adapter’s
cord through the strain
relief slot on the base’s
bottom.
• away from other cordless phones
You can try different locations to see which
provides the best performance.
5. Plug the adapter into a standard AC
outlet.
Cautions:
You must use a Class 2 power
source that supplies 9V DC
and delivers at least 350 mA.
6. Lift the base’s antenna to a vertical
position.
!
Its center tip must be set to positive and
its plug must fit the phone's DC IN 9V
jack. The supplied adapter meets these
specifications. Using an adapter that
does not meet these specifications
could damage the phone or the adapter.
On a Wall Plate or Wall
1. Insert the two tabs
at the top of the
narrow end of the
supplied bracket
into the base’s
upper tab slots,
then press down
on the bracket’s
• Always connect the AC adapter to the
phone before you connect it to AC
power. When you finish, disconnect the
adapter from AC power before you
disconnect it from the phone.
latches and insert
them into the lower slots.
Your telephone connects directly to a
modular telephone line jack. If your
telephone wiring does not have a modular
jack, you can update the wiring yourself
using jacks and adapters (available at your
local RadioShack store), or have the
telephone company update the wiring for
you. You must use compatible modular jacks
that are compliant with Part 68 of FCC
Rules.The USOC number of the jack to be
installed is RJ11C (RJ11W for a wall plate).
2. Plug one end of the supplied short
TEL LINE
modular cord into the
the base’s back.
jack on
3. Insert the supplied AC adapter’s barrel
DC IN 9V
plug into the
jack.
4. Route the adapter and modular cords
through the bracket’s grooves.
5. Plug the modular
cord’s other end into
the wall plate jack,
then align the
On a Desk Top
1. Plug one end of the supplied long
bracket’s keyhole
slots with the wall
TEL LINE
modular cord into the
the base’s back.
jack on
7
Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
plate studs and slide the base
downward to secure it.
2. Lift the battery pack out of the
compartment.
6. Plug the adapter into a standard AC
outlet.
3. Plug the battery
pack’s connector
into the socket in
the compartment.
The connector fits
only one way.
7. Press and lift out the handset holder, flip
it over, then snap it back into place to
hold the handset.
8. Lift the base’s antenna to a vertical
position.
4. Put the battery pack in the compartment.
5. Replace the cover.
To mount the phone directly on a wall, you
need two screws (not supplied) with heads
that fit into the keyhole slots on the bracket.
Follow the steps under “On a Wall Plate or
Wall” then apply these additional
To charge the battery pack, place the
handset on the base, face up or down. The
base’s CHARGE/IN USE indicator lights.
Recharge the battery pack when Bemý8Wjj[hoý
flashes.
instructions.
1. Drill two holes 3 15 /16 inches apart.
Thread a screw into each hole, letting
the heads extend about 1/8 inch.
Important:
Be sure the battery pack is
properly connected before you try to charge
it. The CHARGE/IN USE indicator lights
when the handset is on the base even if the
battery pack is not connected properly.
2. Plug one end of the supplied long
TEL LINE
modular cord into the
the base’s back.
jack on
Notes:
3. Align the bracket’s
keyhole slots with the
mounting screws and
slide the base
• When you first use the phone after
charging or recharging the battery pack,
the phone might not work and you might
hear error beeps. If this happens, return
the handset to the base for about 5
seconds to reset the security access-
protection code.
downward to secure
it.
CONNECTING, CHARGING
AND REPLACING THE
BATTERY PACK
• Using a pencil eraser, clean the
charging contacts on the handset and
the base about once a month.
The phone comes with a rechargeable Ni-Cd
(nickel-cadmium) battery pack installed in
the handset, but not connected. Before using
your phone, you must connect the battery
pack, then charge it for about 24 hours.
• If the phone does not work, recharge the
battery pack. (The battery power might
be too low to flash the display.)
• If the battery pack becomes weak during
a call, the handset beeps andýBemý
8Wjj[ho flashes. When this happens, you
cannot make a call on the phone until
you recharge the battery pack.
1. Press down and slide off the battery
pack compartment cover.
8
Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
• About once a month, fully discharge the
battery pack by keeping the handset off
the base until Bemý8Wjj[ho flashes.
Otherwise, the battery pack loses its
ability to fully recharge.
recycling and disposal bans/restrictions in
your area. RadioShack’s involvement in this
program is part of the company’s
commitment to preserving our environment
and conserving our natural resources.
• If the battery pack is completely
discharged or the base loses power
while the handset is away from it, place
the handset on the base to reset the
security access-protection code. If it was
the handset that lost power, recharge
the battery pack.
SETTING THE DIALING
MODE
Your phone comes set for tone dialing. If you
have pulse service, you need to change the
dialing mode. If you are not sure which type
of service you have, do this test.
The supplied battery pack should last about
a year. If the battery pack does not hold a
charge for more than 2 hours after an
overnight charge, replace it with a new 3.6-
volt, 600 mAh battery pack with a connector
that fits the socket in the battery
compartment. You can order a replacement
battery pack through your local RadioShack
store. Install the new battery pack and
charge it for about 24 hours.
TALK
Lift the handset, press
, and listen for a
dial tone. Press any number other than 0 or,
if required, an outside line access code (9,
for example).
If the dial tone stops, you have touch-tone
service. If the dial tone continues, you have
pulse service.
TALK
To set the dial mode, press
to hang up
the phone if necessary, then hold down
Warning:
Dispose of the old battery pack
FLASH
until the phone beeps and the current
promptly and properly. Do not burn or bury it
(see “Battery Safety Instructions” on Page 4
for additional information on proper battery
handling).
#
dialing mode appears. Then press /7 to
TONE
set to pulse or
/6/ to set to tone. The
phone beeps andýFkbi[ý:_Wb_d] or Jed[ý:_Wb_d]
*
appears then clears.
If you have trouble replacing the battery
pack, take the phone to your local
RadioShack for assistance.
Note:
The phone exits setting mode if a call
or page is received, or if you press J7BA.
If the battery pack power becomes too low,
the dial mode might reset to tone. If you are
on a pulse line and cannot make a call, try
setting dialing mode to pulse.
Important:
The EPA certified
RBRC® Battery Recycling Seal
on the nickel-cadmium (Ni-Cd)
battery indicates RadioShack
is voluntarily participating in an
SETTING THE HANDSET’S
RINGER TONE/VOLUME
industry program to collect and recycle these
batteries at the end of their useful life, when
taken out of service in the United States or
Canada. The RBRC program provides a
convenient alternative to placing used Ni-Cd
batteries into the trash or the municipal
waste stream, which may be illegal in your
area. Please call 1-800-THE-SHACK (1-800-
843-7422) for information on Ni-Cd battery
You can select one of the handset’s four
different ringer tone/volume settings. At any
time, except during a call, repeatedly press
8 or 9 to select the desired ringer setting.
Each time you press a button, the phone
rings at the selected setting and H_d][hýJof[ý7
9
Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
>_]^, H_d][hJof[ý7ýBem, H_d][hýJof[ý8ý>_]^, orý
H_d][hýJof[ý8ýBemýappears.
handset from the base or, if the handset is
away from the base, by pressing any key.
To turn auto talk on or off:
TURNING THE BASE’S
RINGER ON/OFF
CALL ID
1. Lift the handset and hold down
until the setup menu appears.
You can set the base’s ringer to high or low,
or turn it off.
SELECT
2. Press
to change the auto talk
setting. Ed or E\\ appears.
MENU
1. Press
four times. The phone
announces “Ringer volume” and its
current setting. The current setting also
displays.
3. To clear the display when you finish,
CALL ID
press
or return the handset to
the base.
SET
2. Press
to enter the setting mode.
TURNING CALLER ID/CALL
WAITING ON/OFF
The system exits the setting mode when
you:
If you have Call Waiting and Caller ID
service, you can set the system to show
Caller ID information for an incoming call
even while you are on the phone.
• wait more than 20 seconds between
key presses
• receive an incoming call
To set the Caller ID/Call Waiting:
PLAY/STOP
• press
• press
CALL ID
1. Lift the handset and hold down
until the menu appears.
TALK
on the handset
Start again at Step 1.
2
2. Press or 9 to select 9?:9Mý(Caller ID/
Call Waiting).
SKIP/
/REPEAT
; or :
to change
3. Press
the setting. The system announces the
setting and displays >_, Be, or E<.
SELECT
3. Press
to change the Caller ID/
Call Waiting setting. Ed or E\\ appears.
SET
4. Press
to store the setting.
4. Return the handset to the base to store
the new setting.
PLAY/STOP
5. Press
to exit the menu
setting.
STORING YOUR AREA
CODE
Even when you turn off the base’s ringer, you
can still make or receive calls using this
phone. Telephones on the same line (and
the handset if it is away from the base) still
ring when there is an incoming call.
You can store your local area code in the
phone’s Caller ID record so it does not show
the area code if the received call is from your
local area. If for some reason you need to
dial the area code (or store in the memory),
you can add it afterwards. “Adding/Deleting
the Area Code” on Page 16.
SETTING AUTO TALK
Your phone is preset so you must press
TALK
to answer a call. With auto talk turned
on, you can answer a call by lifting the
10
Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECT
to store the area code,
If your calling area requires 10-digit dialing
including area code, do not enter the area
code but leave this option blank.
4. Press
CALL ID
then press
or return the handset
to the base to clear the display.
To store your area code:
SELECTING A LANGUAGE
CALL ID
1. Lift the handset and hold down
until the menu appears.
You can set the display’s language to
English or French. To select the language:
3
2. Press or 9 twice to selectý7h[Wý9eZ[.
CALL ID
1. Lift the handset and hold down
until the menu appears.
SELECT
3. Press
, then enter your three-
digit area code. If you make a mistake,
4
2. Press or 9 thee times to move the
TONE/ /*
#/
repeatedly press
6 or 7 to
cursor to BWd]kW][.
move the cursor over the incorrect digit,
then enter the correct number.
SELECT
3. Press
to selectý;d] (English) or
<h$ý(French).
Note:
If an area code is already stored,
it appears on the display. To delete the
4. Return the handset to the base or press
DELETE
area code, press
three times,
CALL ID
to store the new setting.
then enter your area code. Or you can
TONE/
use
6/* or #/7#to move the
cursor and edit the area code.
ˆ Telephone Operation
TALK
press
. If auto talk is on, just lift the
MAKING AND RECEIVING
CALLS
handset from the base or press any key.
To end a call, place the handset on the base
To make a call, lift the handset and press
TALK
or press
.
TALK
. JWba and the current volume setting
(see “Setting the Handset Volume” on
Page 12) appear on the handset, and the
base’s CHARGE/IN USE indicator lights.
Then dial the number. The number displays
on the handset as you dial, then the call’s
elapsed time appears.
SELECTING THE CHANNEL
The phone scans 40 channels (frequency
pairs used between the base and the
handset) and automatically selects a clear
channel when you make or receive a call.
You can also dial the number before you
If you hear other conversations or excessive
TALK
press
repeatedly press
entry, then enter the correct number. You
. If you make a mistake,
CH
noise during a call, press
to select a
DELETE
to erase the wrong
different channel. IYWdd_d] appears as your
phone searches for a clear channel. If the
handset is too far from the base, the channel
might not change. Move closer to the base
and try again.
DELETE
can also hold down
entire number.
to delete the
When you receive a call, ?dYec_d]ý9Wbbý
appears. Lift the handset from the base and
11
Telephone Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE HANDSET
VOLUME
USING TONE SERVICES ON
A PULSE LINE
To adjust the handset’s volume during a call,
press 8 or 9 on the handset until you reach
the desired volume level. Lebkc[ýCWn_ckc,
Lebkc[ý>_]^, Lebkc[ýC[Z_kc, or Lebkc[ýBem
appears.
Some special services, such as bank-by-
phone, require tone signals. If you have
pulse service, you can still use these special
tone services. Dial the service’s main
number. When the service answers, press
TONE/
6/*. Any additional numbers you dial
When you press 8 while the volume is
maximum or 9 while the volume is low, the
handset beeps and the setting does not
change.
are sent as tone signals.
When you hang up, the phone automatically
resets to pulse dialing.
The volume level setting is maintained even
after you hang up the phone.
PAGING
To page the person who has the handset or
to locate the handset when the phone is not
USING FLASH
PAGE
in use, press
on the base. The handset
FLASH performs the electronic equivalent of
a switchhook operation for special services,
such as Call Waiting.
beeps for about one minute. To stop it from
beeping sooner, press any key on the
handset or return the handset to the base.
PAGE
Press
base.
again to stop the paging at the
For example, if you have Call Waiting, press
FLASH
to answer an incoming call without
FLASH
disconnecting the current call. Press
again to return to the first call.
USING A HEADSET
You can connect an optional headset with
a 3 /32-inch (2.5-mm) plug. Contact your local
RadioShack store for a suitable headset.
If you do not have any special phone
FLASH
services, pressing
the current call.
might disconnect
To connect the headset, open the rubber
cover on the side of the handset, then insert
the headset’s plug into the jack.
USING REDIAL
To quickly dial the last number dialed, lift the
REDIAL
TALK
.
after
handset and press
You can also press
, then press
When you finish using the headset,
disconnect it from the handset and close the
rubber cover to protect the jack.
REDIAL/PAUSE
TALK
pressing
.
Notes:
Notes:
• The redial memory holds up to 32 digits,
so you can redial long-distance as well
as local numbers.
• Connecting a headset disconnects the
handset’s earpiece and microphone.
• 8 or 9 on the handset also controls the
connected headset’s volume.
• The redial memory also holds pause
entries (see “Entering a Pause” on
Page 14).
• If you place the handset on the base to
recharge it while the headset is
12
Telephone Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
connected, be sure the handset seats
properly.
press twice for the second letter in the
upper case, and so on. To enter the
lower case letter, press four times (or
five times) to display the first letter in
lower case, five or six times for the
second letter, and so on.
• With a headset connected, you make or
answer calls as usual using the keys on
the handset.
• You can use an optional handset holder
(available from your local RadioShack
store) to hang the handset on your belt
for greater convenience.
5
For example, to enter John: press
once; upper case @ appears. Then press
six times; lower case e appears. Press
five times; lower case ^ appears.
6
4
6
Finally, press five times; lower case d
appears.
MEMORY DIALING
To enter two letters from the same key in
a row, press #/7 to move the cursor to
the next position. For example to enter
AB, press 2; 7 appears. Then press #/7,
the cursor moves to the next position,
You can store up to 10 phone numbers and
names in memory, then dial a stored number
by entering its memory location number.
Each number can be up to 20 digits, and
each name can be up to 14 characters.
2
then press twice so 8 appears.
Storing a Name and Number in
Memory
/
To enter a space, press # 7 twice
without entering any character.
When you are storing a number in memory,
an error tone sounds and the phone exits the
storing process if you wait more than 20
seconds between each keypress. If you
receive a call during memory entry, the
phone exits the storing process.
To enter a number, repeatedly press the
corresponding number key until the
number appears.
0
To enter a special character, use . Each
0
time you press , the following
characters appear in this order:
To store a number and name in memory:
1. Lift the handset.
-ýçý#ý)ýâýá (space) &
TONE/
If you make a mistake, use
6/* or
MEM
2. Hold down
until C[cehoýIjeh[ and a
#/7 to move the cursor over the error,
then enter the correct character, or
list of memory location numbers appear.
DELETE
press
to delete a character. To
0 9
3. Press the appropriate numbers ( – ) to
delete all characters, briefly hold down
choose a memory location.
DELETE
.
SELECT
4. Press
. Ijeh[ýDWc[ appears. If
SELECT
6. Press
. Ijeh[ýDkcX[hýappears.
you do not want to enter a name, skip to
Step 6.
7. Enter the phone number and any tone or
pause entries (see “Using Tone Services
on a Pulse Line” on Page 12 and
5. To enter a name, use the number keys.
“Entering a Pause” on Page 14).
Refer to the letters on the number keys
to select the desired letter. Press the key
once for the first letter in the upper case,
Note:
Each tone or pause entry uses
one digit of memory.
13
Telephone Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECT
8. Press
. The phone beeps and
should also store a pause after the access
code to allow the outside line time to
C[cehoýdýIjeh[Z (d is the memory
location number) appears.
connect. To enter a 2-second pause, press
REDIAL/PAUSE
. F appears. You can add
C[cehoýIjeh[ appears. Repeat Steps 3–
8 to store more numbers.
more pause entries for a longer pause.
Reviewing Memory Numbers
MEM
9. When you finish, press
.
To review your memory numbers, press
To replace a stored number, store a new one
in its place.
MEM
. The list of memory location numbers
('–&) appears with the name stored with each
number (or 2C[cehoýd4 if you did not store a
name).
Editing or Deleting a Number in
Memory
To see the stored phone numbers, press #/
7. An arrow to the right of the number
means it is longer than 14 digits. Press #/7
again to see the rest of the number.
1. Lift the handset.
MEM
2. Hold down
until C[cehoýIjeh[ and a
list of memory location numbers appear.
TONE/
Repeatedly press
name display.
6/*to return to the
0 9
3. Choose a memory location ( – ) by
pressing a number or by repeatedly
pressing 8 or 9.
MEM
To exit the memory number list, press
.
To see a stored name and phone number at
SELECT
4. Press
. Press 8 or 9 to
SELECT
the same time, press
when the
highlight one of the three options then
cursor is by a memory location number. To
SELECT
press
to choose it.
DELETE
exit this display, hold down
display clears.
until the
;Z_jýC[cehoýd — edit the record as
described in Steps 5 through 8 of
“Storing a Name and Number in
Memory” on Page 13.
Dialing a Memory Number
To dial a number stored in memory, lift the
MEM
handset and press
. The list of memory
:[b[j[ýC[cehoýd — the display prompts
you to confirm the deletion. Press 8 to
move the cursor to O[i, then press
location numbers appears.
0 9
Choose a memory location ( – ) by pressing
a number or by repeatedly pressing 8 or 9,
SELECT
DELETE
. The phone beeps,
or
and C[cehoýdý:[b[j[Z appears.
TALK
then press
.
=eý8WYa — returns you to the list of
memory numbers.
You can also dial a memory number after
TALK
MEM
(the display does
pressing
. Press
not change but the phone’s memory recall
activates) then enter a memory location
number.
Entering a Pause
In some telephone systems, you must dial an
access code (9, for example) and wait for a
second dial tone before you can dial an
outside number. You can store the access
code with the phone number. However, you
Chain-Dialing Service Numbers
For quick recall of numbers for special
services (such as bank by phone), store
14
Telephone Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
each group of numbers in its own memory
location. Dial the service’s main number first.
Then, at the appropriate place in the call,
Testing Stored Emergency
Numbers
MEM
press
and enter the number for the
If you store an emergency service’s number
(police department, fire department,
location where the additional information is
stored.
ambulance) and you choose to test the
stored number, make the test call during the
late evening or early morning hours to avoid
peak demand periods. Also, remain on the
line to explain the reason for your call.
ˆ Caller ID Operation
If you subscribe to Caller ID service from
your phone company, the phone company
sends information about the call, as well as
the time and date, between the first and
second rings of every call you receive.
Note:
If the handset is faceup on the base, it
shows the number of Caller ID records, so
you can see if you have new records to
review.
Repeatedly press 9 to scroll through the
Caller ID records from the most recent to the
oldest, or 8 to scroll back through the
records. To scroll quickly through the
records, hold down 8 or 9.
The phone displays this information after the
second ring, and it stores up to 30 Caller ID
records for later review. It also shows if caller
information is unavailable or if the name and
number were blocked by the caller (see
“Caller ID Messages” on Page 16).
When you scroll past the last record, the total
record number appears, then the first record.
When you scroll past the first record, the total
record number appears, then the last record.
If the phone’s Caller ID memory becomes
full, any new call replaces the oldest call
record.
The top line of each record shows the date,
time and the number of calls from that
number. The second line shows the caller’s
name, and the third line shows the caller’s
phone number.
If you subscribe to Call Waiting and Caller
ID, you will hear a tone through the handset
when a call comes in, then the Caller ID
record appears. If you want to answer the
FLASH
incoming call, press
. To resume the
To exit the Caller ID record display, press
FLASH
previous phone conversation, press
again.
CALL ID
.
REVIEWING CALLER ID
RECORDS
To review the Caller ID records, lift the
CALL ID
handset and press
. The number of
new Caller ID records, if any, and the total
number of records appear.
15
Caller ID Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID Messages
DIALING NUMBERS FROM A
CALLER ID RECORD
Display
Description
To dial a local number stored in a Caller ID
TALK
record, recall the record, then press
. If
Shows the number of new
Caller ID records (records
you have not reviewed)
and the total number of
records.
D[m0ýNN
JejWb0ýNN
1
it is a long distance call, press (' appears
before the displayed number) before you
TALK
press
. If you want to add or delete the
3
TALK
.
area code, press before you press
The caller has blocked the
Caller ID information.
or
Note:
If a Caller ID record does not contain a
Fh_lWj[ýDWc[ý
Fh_lWj[ýDkcX[h
phone number (if it was blocked by the caller,
for example), you cannot dial from that
record.
The caller is not within a
Caller ID service area.
KdademdýDWc[
or
Kdademdý
DkcX[h
STORING A CALLER ID
RECORD IN MEMORY
Appears if there was an
error during the
?dYecfb[j[ý:WjW
transmission of Caller ID
information. Occasional
errors are normal. If the
phone frequently displaysý
?dYecfb[j[ý:WjW, contact
your local telephone
company or RadioShack
store.
CALL ID
1. Press
, then 8 or 9 to recall the
record you want to store.
1
If it is a long distance number, press .
If you want to add or delete the area
3
code, press .
MEM
2. Press
. I[b[YjýBeYWj_ed appears.
ADDING/DELETING THE
AREA CODE
0 9
3. Choose a memory location ( – ) by
pressing a number or by repeatedly
SELECT
pressing 8 or 9, then press
.
When the area code of the received call is
the same as the one you stored (see “Storing
Your Area Code” on Page 10), the caller ID
record does not show the area code. If it is
different, the record shows the area code.
If the selected location is empty, the
phone beeps to confirm that it stored the
number, then the Caller ID record
appears.
However, you can add or delete the area
code on the display. When the record is on
If a record exists in the selected
location, H[fbWY[ýC[ceho5 appears,
prompting you to confirm the
3
the display, press to add or delete the area
3
code. Pressing again deletes or adds the
replacement. Move the cursor to O[i or
area code.
SELECT
De, then press
.
When you dial the number or store it into
memory, the phone dials or stores the
number as it appears on the display.
DELETING CALLER ID
RECORDS
You can delete Caller ID records individually
or all at once.
16
Caller ID Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
To delete a single Caller ID record:
To delete all Caller ID records:
CALL ID
CALL ID
1. Press
then 8 or 9 to recall the
1. Press
totals.
to display the record
record you want to delete.
DELETE
DELETE
2. Press
. :[b[j[ýC[iiW][5ýappears.
2. Press
. :[b[j[ý7bb5 appears.
3. Press 8 or 9 to move the cursor to O[i,
3. Press 8 or 9 to move the cursor to O[i,
SELECT
DELETE
SELECT
DELETE
or . The
then press
or
. The
then press
phone beeps to indicate the record was
deleted.
phone beeps and JejWb0ý&& appears,
indicating all Caller ID records were
deleted.
ˆ Answering System Operation
PLAY/STOP
• press
USING THE MENU BUTTON
TALK
• press
on the handset
MENU
Use
on the base to select the various
function settings. Each time you press
Start again at Step 1 of the setting operation.
MENU
, the system announces the function
and its current setting.
SETTING THE DAY/TIME
# of
Presses
You must set the day and time so the system
can record the correct day and time of each
message.
Function
1
2
3
4
5
Outgoing message
Clock set
Note:
Enter each key press within about 2
minutes. Otherwise, the system exits the
time setting process and you must begin
again with Step 1.
Remote operation Security Code
Ringer volume
MENU
1. Press
twice. The system
Number of rings before the
system answers
announces “Time”, then the currently set
time and the day.
6
7
Recording time for incoming
messages
SET
2. Press
to enter the time setting
mode. The system announces the
currently set day and displays the day’s
Exit the menu setting mode.
0
1
number ( for Sunday, for Monday, and
so on).
The system exits menu setting when you:
SKIP/
3. Repeatedly press
move forward or :/
backward until the correct day appears,
; on the base to
• wait more than 20 seconds between key
presses (except when you set the clock,
for which time-out is about 2 minutes)
REPEAT
to move
SET
then press
. The system announces
• receive an incoming call
and displays the hour.
17
Answering System Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
SKIP
REPEAT
/; or :/
4. Repeatedly press
SETTING THE RECORD
TIME
until the correct hour appears, then
SET
press
. The system announces and
displays the minutes.
You can set the recording time to 1, 4, or
Announce Only to determine how the system
records incoming messages.
SKIP
REPEAT
/; or :/
5. Repeatedly press
until the correct minutes appear, then
SET
press
. The system announces “AM”
At the 1 or 4 settings, the system plays the
outgoing message and lets callers leave a
message up to 1 minute (or 4 minutes) long.
At the Announce Only setting, the system
plays the outgoing message but does not let
callers leave a message.
or “PM,” and 7 or F appears.
SKIP
REPEAT
6. Press
AM or PM, then press
beeps and announces the day and time.
/; or :/
to choose
SET
. The system
PLAY/STOP
7. Press
to exit.
MENU
1. Press
six times. The system
announces “Record time” followed by
the current setting. The current setting
displays, ', *, orý7 (Announce Only).
MENU
To check the day and time, press
twice. The system announces the currently
PLAY/STOP
set day and time. Press
the menu.
to exit
SET
2. Press
.
Note:
If power fails, the clock retains the
SKIP
REPEAT
3. Repeatedly press
/; or :/
current time. When the power is restored, it
starts counting again from the time the power
failed.
until the desired number appears.
SET
4. Press
5. Press
to store the setting.
PLAY/STOP
to exit.
SETTING THE NUMBER OF
RINGS
SELECTING THE OUTGOING
MESSAGE
You can select how long the system waits to
answer a call — 2, 4, or 6 rings, or toll-saver.
If you plan to check messages by long
distance, set the ring time to toll-saver (see
“Using the Toll-Saver” on Page 22).
The system has two prerecorded outgoing
messages. One asks the caller to leave a
message: “Hello, no one is available to take
your call. Please leave a message after the
tone.” The system uses this message when
the recording time is set to 1 or 4 (see
"Setting the Record Time").
MENU
1. Press
five times. The system
announces “Ring time” followed by the
current setting. The current setting (, *,
,, or jI (toll saver) displays.
The other is an announcement only and
does not let the caller leave a message:
“Hello, no one is available to take your call.
Please call again.” The system uses this
message when the recording time is set to
Announce Only.
SET
2. Press
.
SKIP
REPEAT
/; or :/
3. Repeatedly press
until the desired number appears.
SET
4. Press
5. Press
to store the setting.
You can also record your own message (see
“Recording/Deleting an Outgoing Message”).
When you record your own outgoing
PLAY/STOP
to exit.
18
Answering System Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
message, the system uses it for all recording
time settings (1, 4, and Announce Only).
the Record Time” on Page 18), it plays the
outgoing message and displays the number
of recorded messages. If it is set to
Announcement Only, it plays the outgoing
message, and 7 appears.
To switch between your outgoing message
and the system’s prerecorded message,
MENU
press
once to enter the outgoing
SKIP/
message setting mode. Then press
;
To set the system to not answer calls, press
REPEAT
ANSWER ON/OFF
again. It announces
or :/
until the current message
plays. While the message is playing, press
“Answer off” and the message counter turns
off.
SKIP
REPEAT
/; or :/ until the desired
message plays. The system switches to the
other message and plays it.
Note:
When the system’s message memory
is full, <B appears and the system announces
“No remaining time” when you try to operate
it.
RECORDING/DELETING AN
OUTGOING MESSAGE
SCREENING CALLS
Follow these steps to record your own
outgoing message (more than 2 seconds
and within 30 seconds long).
You can let the system answer calls while
you listen to the caller’s message through
the speaker. If you decide to answer the call,
MENU
1. Press
once. The system
TALK
press
to answer if the handset is off the
announces “Greeting message”,
followed by the current outgoing
message. #ý# appears.
base, or if the handset is on the base, lift it.
You can also pick up any phone on the same
line. The system stops recording and resets
to answer the next call.
MEMO/REC
2. Press
. The system
announces “Record your greeting after
the tone.”
VOLUME
Press
8 or 9 to adjust the volume
level of call screening. If you do not want to
3. When the tone sounds, speak your
message.
VOLUME
listen to calls, repeatedly press
9
until & appears.
4. When you finish your message, press
Note:
Even if you turn the volume toý& for call
MEMO/REC
PLAY/STOP
. The system
or
screening, you can still hear incoming
message playback and announcements.
beeps and plays back your message.
PLAY/STOP
5. Press
to exit.
RECORDING INCOMING
MESSAGES
To delete your outgoing message and use
the system’s prerecorded messages, press
MENU
DELETE
when your
once, then press
After the system answers a call, it plays the
outgoing message, beeps, then records the
caller’s message. Each incoming message
can be up to 1 or 4 minutes long, depending
on how you set the recording time (see
“Setting the Record Time” on Page 18). The
maximum recording capacity is about 16
minutes (or 59 messages).
message plays. The system announces
“Your greeting has been deleted.”
SETTING THE SYSTEM TO
ANSWER CALLS
ANSWER ON/OFF
Press
. If the system is set
to record a caller’s message (see “Setting
19
Answering System Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
The system stops recording and resets to
answer the next call when:
RECORDING A
CONVERSATION
• The caller hangs up.
The system lets you record both sides of a
telephone conversation when you are talking
with the handset.
• The maximum message length is
reached.
Important:
Every state has different
• The system detects a busy signal or
more than 7 seconds of silence.
regulations governing the recording of
conversations over the telephone. Be sure to
check your local, state and federal laws
before using this product to record any
telephone conversation in order to determine
that your use is in compliance with such laws
or guidelines.
• You pick up the handset or any phone
on the same phone line.
Note:
When the message memory is full, the
caller will hear the prerecorded
announcement-only message ("Hello, no
one is available to take your call. Please call
again.") and the system cannot record
additional messages until you delete some of
the old messages (see “Deleting Messages”
on Page 21).
To start recording a phone conversation,
MEMO/REC
press
on the base until the
answering system beeps and ## appears. As
it records the conversation, the system
beeps to indicate the conversation is being
PLAY/
recorded. To stop recording, press
STOP
MEMO/REC
. The system stores a
or
RECORDING A MEMO
recorded conversation as a message (see
“Playing Messages”).
A memo is a message you can record for
yourself or others. The system stores memos
as incoming messages (see “Playing
Messages”).
Notes:
• The maximum length for recording a
conversation is ten minutes.
MEMO/REC
Hold down
until the system
beeps and announces “Record your
message after the tone.” When the tone
sounds, speak your message.
• The system cannot record a
conversation less than two seconds
long.
MEMO/REC
When you finish the memo, press
• When the system’s message memory is
full, <B appears.
PLAY/STOP
or
.
Notes:
PLAYING MESSAGES
• The maximum length for recording a
memo is ten minutes.
After the answering system has recorded a
message, its message counter shows the
total number of messages stored. If you have
new messages, the number of new
• The system cannot record a memo less
than two seconds long.
messages flash. To play your messages,
PLAY/STOP
. The system announces
• When the TAD’s message memory is
full, <Býappears and the system
announces “No remaining time” when
you try to operate it.
press
the number of new and old messages, then
plays the new messages. The message
number appears as each message plays,
20
Answering System Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
Note:
and the system announces the day and time
of the call at the end of each message.
You cannot delete new (unplayed)
messages. If you try to delete all messages
at once while you still have new messages,
the system beeps and announces “Please
play back all messages.”
To play all messages after playing the new
PLAY/STOP
messages, press
again.
SKIP
To skip to the next message, press
/;
REMOTE OPERATION
while the message is playing. Hold down
SKIP/
; to quickly advance through a
message. The system advances through the
playback at double speed until the end of the
While you are away from your home or
office, you can use a touch-tone phone, or a
pulse (rotary) phone with a pocket tone dialer
(available through your local RadioShack
store), to enter your security code and do
any of the following:
SKIP
last message. Release
normal playback.
/; to resume
To replay the current message from the
REPEAT
beginning, press :/
REPEAT
. Hold down :/
• Set the system to answer or not answer
calls.
to review the current message. The
system skips back every other second of
playback and plays the previous second,
until the beginning of the message. Release
• Listen to your messages.
• Record a new outgoing message.
• Record a memo.
/REPEAT
:
to resume normal playback.
/REPEAT
If you press :
within about 2
seconds (4 seconds during remote
• Erase messages.
operation) after a message begins playing,
the previous message replays. If the current
message is the first new message, the
system plays back from the beginning of the
current message (it does not go back into the
old message group).
You cannot remotely operate the system
using its handset or another telephone on
the same line.
Setting the Security Code
ADJUSTING THE VOLUME
The two-digit remote operation security code
prevents unauthorized remote access to
your messages. The code is preset to 80. To
change the code to any number from 00 to
99:
To adjust the speaker’s volume, repeatedly
VOLUME
press
8 or 9 on the base. The
volume setting from & (lowest) to / (highest)
appears.
MENU
1. Press
three times. The system
DELETING MESSAGES
announces “Security code,” followed by
the currently set code. The code
appears.
To delete the current message while it is
DELETE
playing, press
. The system beeps.
SET
2. Press
.
To delete all messages at once, while
messages are not playing, hold down
SKIP
3. Repeatedly press or hold down
/;
DELETE
until the system beeps and
REPEAT
or :/
to change the number.
announces “Messages have been deleted.” &
appears.
SET
4. Press
to store the setting. The
system announces the newly set code.
21
Answering System Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAY/STOP
5. Press
.
press #, then enter your security code
within 2 seconds.
MENU
To check your code at any time, press
three times. The code appears, and the
system announces it.
3. If the code is correct, the system
announces the number of new and old
messages, then “To play incoming
message, press pound two. For help,
press pound zero.”
Using the Toll-Saver
If the ring time is set to jI (toll-saver) (see
“Setting the Number of Rings” on Page 18),
the system answers after two rings if you
have new messages (ones you have not
listened to). If there are no new messages,
the system answers after four rings so you
can hang up before the system answers and
avoid unnecessary long-distance charges. If
the message memory is full however, the
system answers after about ten rings
If the system does not respond, try
entering your code again. If you enter an
incorrect code three times, the system
beeps and disconnects.
4. While the system is beeping, press #
and (within 2 seconds) the number for
the command you want.
regardless of the ring time setting.
USING REMOTE
COMMANDS
While in remote operation, the system stops
all answering functions and displays h9.
Answering functions resume when it is no
longer in remote command, if you have not
turned the system off.
The remote operation stops when someone
picks up the handset or any phone on the
same phone line.
Follow these steps to operate the answering
system from a remote location.
Note:
If you wait more than 15 seconds
between each keypress, the system sounds
a long beep and hangs up.
1. Dial your phone number and wait for the
system to answer. If the system is not
set to answer calls, it will answer after
about ten rings and sound a series of
beeps.
2. When the outgoing message begins (or
the system sounds a series of beeps),
22
Answering System Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Commands
Press
#
To
then
1
Repeat current message during
playback. If you press #,1 within
about 4 seconds after a message
begins, the previous message
replays (unless it is the first new
message).
2
Play messages. The remote
playback of incoming messages is
limited to 4 minutes. If you have more
messages after 4 minutes have
passed, you must press # 2 again to
listen to the rest of the messages.
3
4
Skip current message during
playback.
Delete current message during
playback. You can only delete the
current message during playback.
You cannot delete all the messages
stored at one time.
5
6
Stop playback or recording.
Set the system to answer calls.
Announces the current outgoing
message.
7
Record a memo. Announces “Record
your message after the tone.” The
length of a memo recorded by remote
operation must be over 2 seconds
and within 4 minutes. Press #,7 again
or #,5 to stop recording.
8
Record a new outgoing message.
Announces “Record your greeting
after the tone.” Press #,8 again or #.5
to stop recording.
9
0
Set the system to not answer calls.
Announces the help guidance.
23
Answering System Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
ˆ Troubleshooting
We do not expect you to have any problems with your phone, but if you do, these suggestions
might help.
Problem
Suggestion
Low volume or unusual sounds.
Someone has picked up another phone on the same line.
Hang up the other phone.
Severe noise interference.
Press CH to change the channel.
Keep the handset away from computers, remote control toys,
wireless microphones, alarm systems, intercoms, room
monitors, fluorescent lights, and electrical appliances.
Move the handset to another location or turn off the source of
interference.
The phone cannot be operated at a
useful distance from the base
because the signal becomes weak or
noisy (handset’s range has
decreased).
Lift the base’s antenna to a vertical position.
Return the handset to the cradle, and recharge the battery
pack. Replace the battery pack if necessary (“Connecting,
Charging and Replacing the Battery Pack” on Page 8).
The phone does not work or works
poorly.
Be sure the base’s phone line cord and AC adapter are
correctly and securely connected, and the battery pack is
charged.
The handset battery pack does not
charge.
Check the charging contacts on the handset and base. If they
are dirty, clean them with a pencil eraser.
Be sure the battery pack is connected correctly.
Replace the battery pack.
The handset does not ring or receive
a page.
Move the base away from other electrical devices and sources
of noise.
Move the handset closer to the base.
Lift the base’s antenna to a vertical position.
Be sure the battery pack is charged. (If the battery power is too
low, it does not have enough power to light the display.)
24
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Suggestion
The handset stops working or works
poorly during a call.
Move the handset closer to the base.
Lift the base’s antenna to a vertical position.
Be sure the battery pack is charged. (If the battery power is too
low, it does not have enough power to light the display.)
If the base loses power while the handset is away, the security
access-protection code might change. Restore power to the
base, then place the handset back on the base. The CHARGE/
IN USE indicator lights, indicating that the code is set again.
Check the charging contacts on the handset and base. If they
are dirty, clean them with a pencil eraser.
You have an incoming call, but do not
receive any Caller ID information.
Let the phone ring twice before you answer so the system has
time to record the Caller ID information.
Check that the system is correctly and securely connected.
Check with your phone company to verify that your Caller ID
service is active.
The system does not answer calls.
Make sure the system is turned on.
Make sure the AC adapter is properly connected.
Check all phone line connections.
Rec Time
ANN
(announce only). Set
The system does not record the
callerss messages
(recording time) is set to
1
4
.
it to or
Delete messages if memory id full.
Low Battery flashes every few
seconds
Be sure the battery pack is correctly connected.
Return the handset to the base to recharge battery pack.
If you still have problems, disconnect the phone. If other phones on the same line work
properly, the fault is in this phone or its installation. If you cannot find the problem, take your
phone to your local RadioShack store for assistance.
25
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
notifies you as soon as possible and advises
you of your right to file a complaint with the
FCC.
CARE
Keep the phone dry; if it gets wet, wipe it dry
immediately. Use and store the phone only in
normal temperature environments. Handle
the phone carefully; do not drop it. Keep the
phone away from dust and dirt, and wipe it
with a damp cloth occasionally to keep it
looking new.
Also, the phone company can make changes
to its lines, equipment, operations, or
procedures that could affect the operation of
this telephone. The telephone company
notifies you of these changes in advance, so
you can take the necessary steps to prevent
interruption of your telephone service.
Modifying or tampering with the phone’s
internal components can cause a
Your phone might cause TV or radio
interference even when it is operating
properly. To determine whether your phone
is causing the interference, turn off your
phone. If the interference goes away, your
phone is causing it. Try to eliminate the
interference by:
malfunction and might invalidate its warranty
and void your FCC authorization to operate
it. If your phone is not performing as it
should, take it to your local RadioShack store
for assistance.
If the trouble is affecting the telephone lines,
the phone company can ask you to
disconnect your phone until you have
resolved the problem.
• moving your phone away from the
receiver
• connecting your phone to an AC outlet
that is on a different electrical circuit
from the receiver
FCC STATEMENT
Your telephone complies with Part 68 of the
FCC Rules. Upon request, you must provide
the phone’s FCC registration number and
REN to your telephone company. These
numbers are on the bottom of the base.
• contacting your local RadioShack store
for help
If you cannot eliminate the interference, the
FCC requires that you stop using your
phone.
Note:
You must not connect your telephone
to:
Some cordless telephones operate on
frequencies that might cause interference to
nearby TVs and VCRs. To minimize or
prevent such interference, the base of the
cordless telephone should not be placed
near or on top of a TV or VCR.
• coin-operated systems
• party-line systems
• most electronic key phone systems
THE FCC WANTS YOU TO
KNOW
LIGHTNING
Your telephone has built-in protection circuits
to reduce the risk of damage from surges in
telephone line and power line current. These
protection circuits meet or exceed the FCC
requirements. However, lightning striking the
In the unlikely event that your phone causes
problems on the phone line, the phone
company can temporarily discontinue your
service. If this happens, the phone company
attempts to notify you in advance. If advance
notice is not practical, the phone company
26
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
telephone or power lines can damage your
telephone.
Lightning damage is not common.
Nevertheless, if you live in an area that has
severe electrical storms, we suggest that you
unplug your phone when storms approach to
reduce the possibility of damage.
27
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited One-Year Warranty
This product is warranted by RadioShack against manufacturing defects in material and workman-
ship under normal use for one (1) year from the date of purchase from RadioShack company-owned
stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, Ra-
dioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING
THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED
IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED
HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RE-
SPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY
LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFOR-
MANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, IN-
CLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS
OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDEN-
TAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limita-
tion of incidental or consequential damages, so the above limitations or exclusions may not apply to
you.
In the event of a product defect during the warranty period, take the product and the RadioShack
sales receipt as proof of purchase date to any RadioShack store. RadioShack will, at its option, un-
less otherwise provided by law: (a) correct the defect by product repair without charge for parts and
labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase
price. All replaced parts and products, and products on which a refund is made, become the prop-
erty of RadioShack. New or reconditioned parts and products may be used in the performance of
warranty service. Repaired or replaced parts and products are warranted for the remainder of the
original warranty period. You will be charged for repair or replacement of the product made after the
expiration of the warranty period.
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse,
accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or
maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs
other than those provided by a RadioShack Authorized Service Facility; (c) consumables such as
fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs
of product removal, installation, set-up service adjustment or reinstallation.
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102
12/99
10A01
43-3814
UCZZ01348BZ
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|