63-969.fm Page 1 Monday, September 27, 1999 9:19 AM
Cat. No. 63-969
OWNER’S MANUAL
Please read before using this equipment.
Projection Clock
Download from Www.Somanuals.com. All Manuals Search And Download.
63-969.fm Page 2 Monday, September 27, 1999 9:19 AM
FEATURES
Your RadioShack Projection Clock combines a simple
design with advanced technology. You can set the clock
so it projects the current time on a wall or the ceiling for
easy nighttime viewing. Its features include:
Adjustable Projection Light — lets you project the time
on any location on a wall or ceiling. This lets you easily
see the time at night.
Large Liquid Crystal Display — makes the clock easy
to read. The current time and alarm time, the time zone
you are in, and the date and day of the week appear on
the display.
Crescendo Alarm — the alarm sounds a series of beeps
that gradually increase in volume.
Snooze Control — temporarily silences the alarm for
about 8 minutes so you can sleep a little longer.
Display Backlight — lets you see all information on the
display even when it is dark.
Supplied AC Adapter — lets you power the clock’s pro-
jection light to help extend battery life.
Three Languages — let you view the day of the week in
English, French, or Spanish.
© 1999 Tandy Corporation.
All Rights Reserved.
RadioShack is a registered trademark used by Tandy Corporation.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
63-969.fm Page 3 Monday, September 27, 1999 9:19 AM
Three Languages — let you view the day of the week in
English, French, or Spanish.
WARNING: To reduce the risk of fire or shock hazard, do not ex-
pose this product to rain or moisture.
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT
!
OPEN.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER OR BACK. NO USER-SERVICE-
ABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PER-
SONNEL.
This symbol is intended to alert you to the pres-
ence of uninsulated dangerous voltage within the
product’s enclosure that might be of sufficient
magnitude to constitute a risk of electric shock.
Do not open the product’s case.
This symbol is intended to inform you that impor-
tant operating and maintenance instructions are
included in the literature accompanying this prod-
uct.
!
Note: You need the supplied AC adapter and two AA bat-
teries (not supplied) to power the projection light.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
63-969.fm Page 4 Monday, September 27, 1999 9:19 AM
PREPARATION
INSTALLING BATTERIES
Your clock requires two AA batteries (not supplied) for
power. For the best performance and longest life, we rec-
ommend RadioShack alkaline batteries.
Cautions:
• Use only fresh batteries of the required size and rec-
ommended type.
• Do not mix old and new batteries, different types of
batteries (standard, alkaline, or rechargeable), or
rechargeable batteries of different capacities.
Follow these steps to install batteries.
1. Slide the battery compartment cover in the direction
of the arrow to remove it.
2. Place the batteries in the compartment as indicated
by the polarity symbols (+ and –) marked inside.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
63-969.fm Page 5 Monday, September 27, 1999 9:19 AM
When you install batteries, all display segments
briefly appear. Then AM12:00appears, followed by
the seconds display. 1appears below MONTHand 1
appears below DATE, indicating January 1. P (the
default time zone) appears above the zone indicator.
Note: The clock is preset to display the day of the
week in English. To set the clock to display in another
language, see “Setting the Clock” on Page 7.
3. Replace the cover.
When BATTappears or the clock stops operating proper-
ly, replace the batteries.
Warning: Dispose of old batteries promptly and properly.
Do not burn or bury them.
Caution: If you do not plan to use the clock for a month
or more, remove the batteries. Batteries can leak chemi-
cals that can destroy electronic parts.
CONNECTING TO AC POWER
Your clock comes with an AC adapter so you can operate
the clock’s projector light continuously from AC power.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
63-969.fm Page 6 Monday, September 27, 1999 9:19 AM
Caution: You must use a Class 2 power source
that supplies 3 volts DC and delivers at least
!
200 mA. Its center tip must be set to positive
and its plug must fit the clock's DC 3V jack. The supplied
adapter meets these specifications. Using an adapter
that does not meet these specifications could damage
the clock or the adapter.
Follow these steps to connect the AC adapter to the
clock.
1. Slide the battery compartment cover in the direction
of the arrow to remove it.
2. Plug the AC adapter’s tip into the jack inside the bat-
tery compartment.
3. Route the adapter’s cord through the slot marked DC
3V on the back of the clock.
4. Replace the cover.
5. Plug the AC adapter’s other end into a standard AC
outlet.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
63-969.fm Page 7 Monday, September 27, 1999 9:19 AM
SETTING THE CLOCK
1. Repeatedly press ZONE to select the time zone you
are in (Pacific, Mountain, Central, or Eastern). As you
press ZONE, the time zone you select is highlighted
and a letter (Pfor Pacific, Mfor Mountain, Cfor Cen-
tral, or Efor Eastern) appears above the zone indica-
tor.
2. Hold down MODE/SET until the hour digit flashes.
3. Repeatedly press +. The hour advances by 1 with
each press. (Hold down + to rapidly advance the
hour).
Note: AMappears for AM hours and PM appears for
PM hours.
4. Press MODE/SET. The minute digits flash.
5. Hold down or repeatedly press + to set the minute.
6. Press MODE/SET. The year digits flash.
7. Repeatedly press + to set the year.
8. Press MODE/SET. The current hour, minute, and day
of the week appear, and the month digit flashes.
9. Hold down or repeatedly press + to set the month.
10. Press MODE/SET. The date digit flashes.
11. Repeatedly press + to set the date.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
63-969.fm Page 8 Monday, September 27, 1999 9:19 AM
12. Press MODE/SET. A letter representing the language
used for the day of the week (E for English, F for
French, or Sfor Spanish) appears.
13. Repeatedly press + to select the desired language.
14. Press MODE/SET. The time, time zone, and date set-
tings appear.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
63-969.fm Page 9 Monday, September 27, 1999 9:19 AM
OPERATION
To switch between viewing the seconds display and the
day of the week, press MODE/SET. To switch between
viewing the month/date and the alarm time, press ALARM
STOP/ALARM SET.
To view the time in another time zone, repeatedly press
ZONE to highlight the zone you want. The time in that
time zone appears.
To light the display for about 5 seconds, press SNOOZE/
LIGHT.
USING THE PROJECTION LIGHT
You can use the clock’s projection light to project the time
on a wall or ceiling.
To project the time, place the clock at least 18 inches
from the surface you are projecting onto, adjust the pro-
jection arm to project light onto the surface where you
want to see the time, then slide PROJECTION LIGHT ON
on the back of the clock in the direction of the arrow.
Projection Arm
PROJECTION
LIGHT ON
9
Download from Www.Somanuals.com. All Manuals Search And Download.
63-969.fm Page 10 Monday, September 27, 1999 9:19 AM
Caution: The projection arm moves about 90 degrees in
either direction. Do not force it.
To focus the time on the desired position, adjust FOCUS
on the side of the projection arm.
To turn off the projection light, slide PROJECTION LIGHT
ON toward the projection arm.
With the projection light off, you can also project the time
by pressing SNOOZE/LIGHT. The projector lights for about
5 seconds then automatically turns off.
USING THE ALARM
Setting the Alarm Time
Note: If you do not press a button within about 90 sec-
onds after you pressed the previous button, the clock ex-
its its alarm setup mode. Start over at Step 1.
1. Hold down ALARM STOP/ALARM SET until the alarm
time and
2. Hold down or repeatedly press +.
alarm hour advances by 1 with each press.
appear. The hour digit flashes.
appears and the
10
Download from Www.Somanuals.com. All Manuals Search And Download.
63-969.fm Page 11 Monday, September 27, 1999 9:19 AM
3. Press ALARM STOP/ALARM SET. The minute digit
flashes.
4. Hold down or repeatedly press + to set the alarm
minute.
5. Press ALARM STOP/ALARM SET. The alarm time
appears.
Notes:
• Repeatedly press ALARM STOP/ALARM SET to switch
between viewing the alarm time and the month and
date.
• The alarm sounds whether the alarm time is dis-
played or not.
Turning the Alarm On/Off
The alarm automatically turns on when you set an alarm
time. To manually turn on the alarm, press ALARM ON/
OFF.
appears.
At the set alarm time, the display lights for about 14 sec-
onds, flashes, and the alarm sounds one soft beep
every 2 seconds.
After 20 seconds, 2 quick beeps sound every 2 seconds
and the volume increases slightly. After 20 more sec-
11
Download from Www.Somanuals.com. All Manuals Search And Download.
63-969.fm Page 12 Monday, September 27, 1999 9:19 AM
onds, 3 quick beeps sound every 2 seconds and the vol-
ume increases again to its maximum level. After another
20 seconds, the beeping becomes continuous (about 4
beeps per second) and sounds for about 1 minute.
To silence the alarm, press ALARM STOP/ALARM SET.
remains on the display and the alarm sounds at the
set alarm time the next day. If you do not silence the
alarm, it automatically turns off after 2 minutes. The first
time this happens, the snooze feature activates and
continues to flash. In about 8 minutes, the alarm sounds
again. If the alarm turns off automatically a second time,
remains on the display and the alarm will not sound
again until the set alarm time the next day.
Note: When the alarm sounds, the projection light and
backlight turn on for about 14 seconds.
To turn off the alarm so it does not sound the next day,
press ALARM ON/OFF.
disappears.
Using SNOOZE/LIGHT
When the alarm sounds, you can press SNOOZE/LIGHT
to silence the alarm for about 8 minutes.
ter 8 minutes, the alarm sounds again.
flashes. Af-
12
Download from Www.Somanuals.com. All Manuals Search And Download.
63-969.fm Page 13 Monday, September 27, 1999 9:19 AM
CARE AND MAINTENANCE
Your RadioShack Projection Clock is an example of su-
perior design and craftsmanship. The following sugges-
tions will help you care for your clock so you can enjoy it
for years.
Keep the clock dry. If it gets wet, wipe it dry im-
mediately. Liquids might contain minerals that
can corrode the electronic circuits.
Use and store the clock only in normal temper-
ature environments. Temperature extremes
can shorten the life of electronic devices, dam-
age batteries, and distort or melt plastic parts.
Keep the clock away from dust and dirt, which
can cause premature wear of parts.
Handle the clock gently and carefully. Dropping
it can damage circuit boards and cases and
can cause the clock to work improperly.
Use only fresh batteries of the required size
and recommended type. Batteries can leak
chemicals that damage your clock’s electronic
parts.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
63-969.fm Page 14 Monday, September 27, 1999 9:19 AM
Wipe the clock with a damp cloth occasionally
to keep it looking new. Do not use harsh chem-
icals, cleaning solvents, or strong detergents to
clean the clock.
Modifying or tampering with the clock’s internal compo-
nents can cause a malfunction and might invalidate its
warranty. If your clock is not performing as it should, take
it to your local RadioShack store for assistance.
RESETTING THE CLOCK
If the clock does not work properly or locks up, you can
reset it. Open the battery compartment and use a pointed
object such as a straightened paper clip to press RESET.
All display segments briefly appear. Follow the steps list-
ed in “Setting the Clock” on Page 7 to set the clock again.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
63-969.fm Page 15 Monday, September 27, 1999 9:19 AM
SPECIFICATIONS
Operating Temperature ............................. 32°F to 109°F
(0°C to 43°C)
Power Sources:
Batteries ............................................................. 2 AA
AC Adapter .......... 3V DC/200 mA, Center Tip Positive
Snooze Time ......................................... About 8 Minutes
Accuracy ............................................. ± 0.5 Second/Day
Dimensions (HWD) ....................... 4 ✕ 59/16 ✕ 15/8 Inches
(101.6 ✕ 141.3 ✕ 41.3 mm)
Weight (Without Batteries) .................................... 8.5 oz
(241 g)
(Without AC Adapter)
Included Accessory ...................................... AC Adapter
Specifications are typical; individual units might vary.
Specifications are subject to change and improvement
without notice.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
63-969.fm Page 16 Monday, September 27, 1999 9:19 AM
Limited One-Year Warranty
This product is warranted by RadioShack against manufacturing defects in material
and workmanship under normal use for one (1) year from the date of purchase from
RadioShack company-owned stores and authorized RadioShack franchisees and
dealers. EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO EXPRESS
WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MER-
CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED
IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES
CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL
HAVE NO LIABILITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER
PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE
CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE
PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUD-
ING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVE-
NIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY
INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF
RadioShack HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some states do not allow the limitations on how long an implied warranty lasts or
the exclusion of incidental or consequential damages, so the above limitations or
exclusions may not apply to you.
In the event of a product defect during the warranty period, take the product and the
RadioShack sales receipt as proof of purchase date to any RadioShack store. Ra-
dioShack will, at its option, unless otherwise provided by law: (a) correct the defect
by product repair without charge for parts and labor; (b) replace the product with
one of the same or similar design; or (c) refund the purchase price. All replaced
parts and products, and products on which a refund is made, become the property
of RadioShack. New or reconditioned parts and products may be used in the per-
formance of warranty service. Repaired or replaced parts and products are war-
ranted for the remainder of the original warranty period. You will be charged for
repair or replacement of the product made after the expiration of the warranty pe-
riod.
This warranty does not cover: (a) damage or failure caused by or attributable to
acts of God, abuse, accident, misuse, improper or abnormal usage, failure to follow
instructions, improper installation or maintenance, alteration, lightning or other inci-
dence of excess voltage or current; (b) any repairs other than those provided by a
RadioShack Authorized Service Facility; (c) consumables such as fuses or batter-
ies; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f)
costs of product removal, installation, set-up service adjustment or reinstallation.
This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX
76102
04/99
We Service What We Sell
09A99
Printed in Hong Kong
Download from Www.Somanuals.com. All Manuals Search And Download.
|