/CMKPIꢂVJGꢂ%QPPGEVKQPU
For the best possible video signal, use only video cables to make the input and output connections for your amplifier. To take advantage of the
ꢀꢁ9C[ꢂ&KUVTKDWVKQPꢂ color-coded jacks on the amplifier, use matching color-coded Stereo Audio/Video Cable. Several types of composite, S-video, and audio cables are
available at your local RadioShack store. Sample connections are shown below. Important: Do not use both composite and S-video for input or output
signals at the same time. Only use either composite or S-video for input and either composite or S-video for output, not both of them.
#ORNKHKGT
Note: Always use the shortest possible cable for the connections. Do not coil extra cable next to the amplifier.
ꢃꢄꢁꢃꢃꢅꢆ
/QWPVKPIꢂVJGꢂ#ORNKHKGT
Install the amplifier near your VCR, computer,
or TV monitor using the screws provided. The
amplifier can be attached to the wall, the
baseboard, or furniture.
1.Select a location for the amplifier. Mark the
mounting screw locations 97mm apart, one
above the other.
2.Drill two 1/16-inch holes for the screws.
3.Insert the supplied screws in the holes,
leaving about 1/8 inch extended.
4.Position the amplifier with the keyhole slots in
the back over the screw heads.
5.Slide the amplifier down until it is attached
securely to the mounting surface.
1. Connect the input device video cable.
2. Connect the output device video cable.
3. Connect the input device audio cable.
4. Connect the output device audio cable.
Stereo
Audio Cable
Composite Video Cable
Mono Audio Cable
S-Video Cable
5. Plug the AC adapter into the AC wall outlet and
into your 4-way distribution amplifier.
WARNING:To reduce the risk of fire or shock
hazard, do not expose this product to rain or moisture.
/LPLWHGꢀꢁꢂꢃ'D\ꢀ:DUUDQW\
6TQWDNGUJQQVKPI
This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for ninety (90) days from the date of purchase from
RadioShack company-owned stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO EXPRESS WARRAN-
TIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO
THE
CAUTION
• If you have poor or no reception on
all the devices connected to the
output jacks, be sure the AC/DC
adapter is plugged into the amplifier
and into a working outlet.
RISK OF ELECTRIC
!
DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RESPONSI-
BILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BYUSE OR
PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM
INCONVENIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF
RadioShack HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or
exclusions may not apply to you.
In the event of a product defect during the warranty period, take the product and the RadioShack sales receipt as proof of purchase date to any RadioShack store. RadioShack
will, at its option, unless otherwise provided by law: (a) correct the defect by product repair without charge for parts and labor; (b) replace the product with one of the same or
similar design; or (c) refund the purchase price. All replaced parts and products, and products on which a refund is made, become the property of RadioShack. New or recondi-
tioned parts and
products may be used in the performance of warranty service. Repaired or replaced parts and products are warranted for the remainder of the original warranty period. You will
be charged for repair or replacement of the product made after the expiration of the warranty period.
SHOCK. DO NOT
OPEN.
CAUTION:TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER OR BACK. NO
USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED PERSONNEL.
Note: Do not mount the amplifier on any other
electronic device. Stacking components may cause
overheating.
• If you have poor or no reception on
a single unit, check the connections
to that unit. Exchange the cables to
locate either a defective cable or
connector.
• If you have poor picture quality, be
sure you are using video cables to
make all the connections.
This symbol is intended to alert you to
the presence of uninsulated dangerous
voltage within the product’s enclosure
that might be of sufficient magnitude to
constitute a risk of electric shock. Do
not open the product’s case.
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse, accident, misuse, improper or abnormal usage, failure to follow instructions,
improper installation or maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs other than those provided by a RadioShack Authorized
Service Facility; (c) consumables such as fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs of product removal, installation,
set-up service adjustment or reinstallation.
9JCV Uꢂ+PENWFGF
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state
RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102
4-WayAudio/VideoDistributionAmplifier
12/99
2 Screws
•
AC Adapter
This symbol is intended to inform you
that important operating and
©2003 RadioShack Corporation.
All Rights Reserved.
RadioShack and RadioShack.com are trademarks
used by RadioShack Corporation.
15-1172
Printed in China
11A03
maintenance instructions are included
in the literature accompanying this
product.
Owner’s Manual
!
AO0198AAA1
Download from Www.Somanuals.com. All Manuals Search And Download.
|