Radica Games Games 71027 User Guide

E1  
B button - Press this button to back out of any  
selection to the previous screen.  
Pan button - When a monster is selected,  
press this button then use the Directional Pad  
to pan across the entire image of the monster.  
Reset button - When a blunt point is inserted,  
this resets the controller to its original settings.  
Just remember when you press this button,  
all your monsters and player data is  
cleared.  
Model 71051/71027/71028  
P/N 82358220 Rev.A  
Skannerz™  
Scanning Port  
B Button  
Directional  
Pad  
For 1 or 2 Players (Second unit required, not  
supplied) / Ages 8 and Up  
On • A Button  
INSTRUCTION MANUAL  
Reset  
Button  
Pan  
Button  
Are you ready to save the universe?  
Hi, this is Flux! I’m the one who first found out  
that our planet is being invaded by alien  
monsters from another planet. I’m really glad  
you’re here to help me in my fight to capture  
and control these creatures. While battling  
each other, they destroyed their own planet, so  
it’s up to us to make sure they don’t do the  
same to Earth. All of them are hiding in our  
barcodes just waiting for the chance to strike,  
so I hope you’re up to the challenge.  
Sound On/Off  
From the Main Menu, choose “sound”, then  
use the Directional Pad and the On • A  
button to turn the sound on or off.  
Contrast  
From the Main Menu, choose “contrast”, then  
use the Directional Pad to adjust the contrast  
on the view screen. Just remember, the lighter  
the contrast is, the longer your controller’s  
batteries last.  
Remember that the fate of our world depends  
on us!  
Now, I’m going to guide you through the  
functions of the controller I designed. Stick  
with me, and we’ll make sure these creatures  
don’t have the chance to battle anyone except  
each other!  
Player  
Displays your “name” and battle record.  
Getting Started  
First, you will be prompted to enter your name  
into your controller. Using the Directional  
Pad, toggle through the characters and select  
them using the On • A button. The B button  
takes you back one letter.  
What you need to know before you  
begin  
You have one of three different coloured  
controllers. The blue controller captures and  
controls the Zendra tribe of alien monsters.  
The green controller controls the Pataak tribe.  
And the red one is for the Ujalu tribe. Any  
“incompatible” monsters you may scan or  
battle can only be captured using one of the  
other two tribes’ controllers.  
Now Let’s Start Collecting Monsters!  
From the Main Menu, select the “Scan” option  
and press the On • A button. The screen will  
read, “Ready to Scan” and the Scanning Port  
at the front of the game will become active for  
10 seconds.  
Secret Flux Hint: Each controller is capable of  
collecting the 42 monsters from its particular  
tribe. But if you want to help me capture as  
many monsters as possible, you’ll have to get  
the other two controllers.  
Along with the controller, you have special  
collector’s cards that have information about  
each of your tribe’s monsters. They tell you  
what particular kind of monster it is (Tech,  
Power, or Magic) and how much damage they  
can give as well as take. There is also a comic  
book that tells you how everything began and  
how this threat found its way to our world.  
Place the “Scanning Port” directly onto the  
surface of the product, in front or behind the  
barcode and slide it over the code from left to  
right or right to left as straight as you can.  
When the code is read, the controller will beep  
and a line with a “heart beat” will appear. If it  
is a “small” heart beat, the code wasn’t  
scanned properly, try again. If a “large” heart  
beat appears, you definitely picked up  
something! If you get a “Flat Line”, there’s no  
sign of life and you should select another  
product to scan.  
Now, let’s learn about your special Skannerz  
controller!  
Button Functions  
The button configuration I came up with is very  
simple:  
Scan 3 barcodes on the back side of this  
instruction sheet marked “Practice Scanning”.  
Scan the 3 for your tribe (e.g. If you have the  
blue unit, scan the three marked Zendra/Blue).  
This will allow you to practice your scanning  
skills and provide you with the first 3 monsters  
from your tribe.  
Directional Pad - This four-way button helps  
you scroll through things like: the Main Menu,  
your collection of monsters, and your inventory  
of items. It also lets you pan across a monster  
pictured in your viewscreen (when a monster is  
selected).  
Now go to any household product that has a  
barcode printed on it.  
Secret Flux Hint: You can press the “left”  
direction of the Directional Pad to return to the  
Main Menu at almost any time.  
Secret Flux Hint: Flat surfaces are the easiest  
to scan. It takes more practice and skill to  
scan round or odd-shaped surfaces. Just  
remember to always keep the Scanning Port  
flat against the surface when scanning.  
Skannerz works best with full sized bar codes.  
See example below. You may have difficulty  
scanning smaller bar codes.  
On • A button - Use this to turn on the  
controller and to make selections (just like an  
“enter” button). When a monster is selected,  
this button also lets you see all information  
about the monster.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
can miss. Then it will be the other monster’s  
turn.  
Sleep Mode  
After 60 seconds of not being used, your  
controller will automatically go into “sleep  
mode”. To turn it on again, simply press the  
On • A button and the controller will return to  
the last screen you were viewing.  
Item  
If you choose an item, your first item in the  
inventory comes up on the screen. Scroll  
through your inventory until you find the item  
you want. Just make sure you choose an item  
that is compatible with the type of monster you  
are using (you know, Tech, Power or Magic).  
And remember, you only get to use an item  
once. Then it gets zapped back to whatever  
barcode you found it in.  
IMPORTANT NOTE: You have 30 seconds  
to change batteries without losing your  
stored data. Your SKANNERZ controller  
must be in sleep mode when changing  
batteries or you will lose all of your stored  
monsters and items.  
Secret Flux Hint: Sometimes you get an  
unlabeled potion as an item. Be VERY careful  
before you let your monster drink it.  
Sometimes it’s good, but sometimes it’s  
poison!  
BATTERY INSTALLATION:  
This game is powered by three (3) AAA  
batteries.  
Switch  
Using a screwdriver, loosen the screw until  
the battery compartment door can be  
removed.  
You can rearrange the order of your team  
during a battle. But be careful, when you  
choose the switch option, you lose a turn and  
possibly miss out on the advantage of a first  
strike.  
Insert three (3) AAA batteries (We  
recommend alkaline) as indicated inside the  
battery compartment.  
Using a combination of items and attacks,  
battle the opposing monsters until all three  
monsters on one team are knocked out. If the  
opposing monsters lose, their molecules are  
once again scattered and are returned to their  
original barcodes. If your monsters lose, they  
remain trapped in your controller but are either  
knocked out or poisoned until you can heal  
them. See “Healing Your Monsters” below.  
Replace the battery compartment door and  
tighten the screw with a screwdriver. Do not  
over-tighten.  
ADULT SUPERVISION IS  
RECOMMENDED WHEN CHANGING  
BATTERIES.  
CAUTION:  
Battling A Friend’s Collection of  
Monsters  
From the Main Menu, both you and your friend  
choose the “V.S.” feature and place your  
controllers against each other, connecting the  
tabs and slots at the top of them, making sure  
that they snap together.  
As with all small batteries, the  
batteries used with this game  
should be kept away from  
small children who might still  
put things in their mouths. If a  
battery is swallowed, consult a  
physician immediately.  
Be sure you insert the battery  
correctly and always follow the  
game and battery  
manufacturer’s instructions.  
Do not dispose of batteries in  
fire.  
Batteries might leak if  
improperly installed, or  
explode if recharged,  
disassembled or heated.  
This is just like battling incompatible monsters  
from random barcodes. However, if your  
opponent’s team loses, his or her monsters  
still remain trapped inside the controller.  
They’re knocked out, but trapped.  
Secret Flux Hint: If you break away from a  
friend’s controller during a battle, you have 10  
seconds to restore the connection before you  
lose the game. You will still retain the  
monsters you have collected, but your  
battle will be over.  
MAINTENANCE:  
Handle this game carefully.  
• Store this game away from dusty or dirty  
areas.  
• Keep this game away from moisture or  
extreme temperature.  
Healing Your Monsters  
• Do not disassemble this game. If a problem  
occurs, press the Reset button, or remove  
and replace the batteries to reset the game  
or try new batteries. If problems persist,  
consult the Warranty information located at  
the end of this Instruction Manual.  
After many battles, even the best of us get our  
monsters knocked out once in a while. Keep  
the Radica barcode from your Skannerz  
package. The only way that your monsters  
can be healed is by scanning a barcode from  
any Radica Game package. If your monster  
is knocked out, it is not active and the “KO”  
symbol will flash at the bottom of your screen.  
Choose “heal” from the Main Menu. The  
knocked out monsters show on the screen  
automatically. Press the On • A button and  
scan any Radica barcode.  
• Use only the recommended battery type.  
• Do not mix old and new batteries.  
• Do not mix alkaline, standard (carbon-zinc)  
or rechargeable (nickel-cadmium) batteries.  
• Do not use rechargeable batteries.  
• Do not attempt to recharge non-rechargeable  
batteries.  
Secret Flux Hint: The barcode on the back  
cover of your Skannerz comic book will heal  
your monsters.  
• Remove any exhausted batteries from the  
game.  
• Do not short-circuit the supply terminals.  
• Insert batteries with the correct polarity.  
Secret Flux Hint: Keep a log of what codes  
generated each monster and item. You may  
need to find them again if you reset your  
scanner.  
Please retain this for future reference.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRODUCT WARRANTY  
(This product warranty is valid in the United  
Kingdom only)  
Tribe 2: Pataak/Green  
®
All products in the RADICA range are fully guaranteed  
for a period of 3 months from the original purchase date  
under normal use, against defective workmanship and  
materials (batteries excluded). This warranty does not  
cover damage resulting from accident, unreasonable use,  
negligence, improper service or other causes not arising  
out of defects in material or workmanship.  
In the unlikely event that you do experience a problem  
within the first 3 months, please telephone the UK  
Technical Support team: Tel. 0870 800 6156 (National  
Call Rate).  
IMPORTANT: Always test the product with fresh alkaline  
batteries. Even new batteries may be defective or weak  
and low battery power is a frequent cause of  
unsatisfactory operation.  
Your statutory rights are not effected.  
Distributed by:  
RADICA U.K. Ltd.  
The Old Stables, Munns Farm,  
Cole Green, Hertfordshire,  
SG14 2NL, England  
RADICA:®  
SKANNERZ IS A TRADEMARK OF  
RADICA CHINA LTD.  
© 2000 RADICA CHINA LTD.  
PRODUCT SHAPE™  
ALL RIGHTS RESERVED  
Practice Scanning,  
Scan these UPCs first.  
Tribe 1: Zendra/Blue  
Tribe 3: Ujalu/Red  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Quadra Fire Welding Consumables QV32B A User Guide
Razor Automobile 25143400 User Guide
Salton Portable Stereo System WT11LT User Guide
Samsung DVD Player 525p User Guide
Samsung DVD Player DVD SH893M User Guide
Samsung MP3 Player DVD V9500 User Guide
Samsung MP3 Player VY H200 User Guide
Samsung Printer SRP 500 User Guide
Samsung Security Camera SSC 17TQ User Guide
Schumacher Battery Charger PSJ 1812 User Guide